Filtern
Erscheinungsjahr
Dokumenttyp
- Konferenzveröffentlichung (409)
- Wissenschaftlicher Artikel (37)
- Buch (Monographie) (18)
- Teil eines Buches (Kapitel) (9)
- Arbeitspapier (8)
- Bericht (1)
Sprache
- Englisch (482) (entfernen)
Schlagworte
- Conference (279)
- Konferenz (277)
- Germany (178)
- Deutschland (174)
- Unfall (163)
- Accident (162)
- Injury (116)
- Verletzung (116)
- Safety (102)
- Sicherheit (97)
- Unfallrekonstruktion (80)
- Analyse (math) (69)
- Analysis (math) (68)
- Bewertung (67)
- Schweregrad (Unfall, Verletzung) (66)
- Evaluation (assessment) (65)
- Vehicle (65)
- Fahrzeug (64)
- Severity (accid, injury) (64)
- Statistics (64)
- Fußgänger (63)
- Pedestrian (63)
- Statistik (63)
- Simulation (59)
- Tödlicher Unfall (59)
- Fatality (58)
- Anfahrversuch (56)
- injury) (54)
- Reconstruction (accid) (53)
- Verletzung) (52)
- Datenbank (51)
- Schweregrad (Unfall (51)
- Severity (accid (49)
- Car (46)
- Datenerfassung (46)
- Collision (45)
- Data acquisition (45)
- Europa (45)
- Europe (45)
- Impact test (veh) (45)
- Unfallverhütung (45)
- Accident prevention (44)
- Test method (44)
- Zusammenstoß (43)
- Prüfverfahren (42)
- On the spot accident investigation (41)
- Untersuchung am Unfallort (40)
- Active safety system (38)
- Cause (38)
- Frontalzusammenstoß (38)
- Ursache (38)
- Radfahrer (37)
- Test (37)
- Aktives Sicherheitssystem (36)
- Data bank (36)
- Fahrerassistenzsystem (36)
- Head on collision (36)
- Cyclist (35)
- Versuch (35)
- Driver (34)
- Driver assistance system (34)
- Fahrer (34)
- Passives Sicherheitssystem (34)
- Passive safety system (31)
- Geschwindigkeit (30)
- Method (30)
- Verfahren (30)
- Leistungsfähigkeit (allg) (29)
- Speed (29)
- Accident reconstruction (27)
- Insasse (27)
- Motorcyclist (27)
- Motorradfahrer (27)
- Efficiency (25)
- Anthropometric dummy (24)
- Dummy (23)
- Risiko (23)
- Vehicle occupant (23)
- Behaviour (22)
- Measurement (22)
- Verhalten (22)
- PKW (21)
- Pkw (21)
- Risk (21)
- Child (20)
- Improvement (20)
- Kind (20)
- Messung (20)
- Risikobewertung (20)
- Verbesserung (20)
- Brustkorb (19)
- Forschungsarbeit (19)
- Risk assessment (19)
- Seitlicher Zusammenstoß (19)
- Biomechanics (18)
- Biomechanik (18)
- Head (18)
- Kopf (18)
- Lorry (18)
- Motorrad (18)
- Rechenmodell (18)
- Sicherheitsgurt (18)
- Side impact (18)
- Alte Leute (17)
- Interview (17)
- Kompatibilität (17)
- Mathematical model (17)
- Motorcycle (17)
- Research project (17)
- Thorax (17)
- Benutzung (16)
- Compatibility (16)
- Development (16)
- Entwicklung (16)
- Old people (16)
- Prevention (16)
- Use (16)
- Berechnung (15)
- Deformation (15)
- Prognose (15)
- Safety belt (15)
- Accident rate (14)
- Auffahrunfall (14)
- Calculation (14)
- Leg (human) (14)
- Rear end collision (14)
- Transport infrastructure (14)
- Verformung (14)
- Airbag (13)
- Belastung (13)
- Database (13)
- Load (13)
- Unfallhäufigkeit (13)
- Bremsung (12)
- EU (12)
- Fahrzeugsitz (12)
- Fehler (12)
- Forecast (12)
- International (12)
- Lkw (12)
- Modification (12)
- Sensor (12)
- Standardisierung (12)
- Vehicle regulations (12)
- Überschlagen (12)
- Braking (11)
- Cost benefit analysis (11)
- Digital model (11)
- Error (11)
- Human factor (11)
- Interior (veh) (11)
- Menschlicher Faktor (11)
- Numerisches Modell (11)
- Research report (11)
- Schutzhelm (11)
- Seat (veh) (11)
- Technische Vorschriften (Kraftfahrzeug) (11)
- Verhütung (11)
- Verkehrsinfrastruktur (11)
- Verminderung (11)
- Veränderung (11)
- Wirtschaftlichkeitsrechnung (11)
- Antikollisionssystem (10)
- Bein (menschl) (10)
- Bemessung (10)
- Crash helmet (10)
- Decrease (10)
- Design (overall design) (10)
- Fahrzeuginnenraum (10)
- Gesetzgebung (10)
- Impact test (10)
- Krankenhaus (10)
- Legislation (10)
- Overturning (veh) (10)
- Politik (10)
- Tunnel (10)
- USA (10)
- Weather (10)
- Wirbelsäule (10)
- Age (9)
- Air bag (restraint system) (9)
- Alter (9)
- Autobahn (9)
- Automatisch (9)
- Collision avoidance system (9)
- Erste Hilfe (9)
- Fahranfänger (9)
- Fahrzeugführung (9)
- Front (9)
- Hospital (9)
- Japan (9)
- Knotenpunkt (9)
- Policy (9)
- Recently qualified driver (9)
- Standardization (9)
- Witterung (9)
- Automatic (8)
- Autonomous driving (8)
- Bridge (8)
- Brücke (8)
- Driver information (8)
- Driving (veh) (8)
- Drunkenness (8)
- Durability (8)
- Forschungsbericht (8)
- Fracture (bone) (8)
- Halswirbel (8)
- Knee (human) (8)
- Knochenbruch (8)
- Oberflächentextur (8)
- Perception (8)
- Shock (8)
- Surface texture (8)
- Technologie (8)
- Technology (8)
- Trunkenheit (8)
- Vereinigtes Königreich (8)
- Verkehrsteilnehmer (8)
- Wahrnehmung (8)
- Austria (7)
- Cervical vertebrae (7)
- Dauerhaftigkeit (7)
- Detection (7)
- Fahrstabilität (7)
- First aid (7)
- Human body (7)
- Impact sled (7)
- Impact study (7)
- Menschlicher Körper (7)
- Motorway (7)
- Norm (tech) (7)
- Ort (Position) (7)
- Road user (7)
- Schlag (7)
- Sichtbarkeit (7)
- Specification (standard) (7)
- Specifications (7)
- Spinal column (7)
- Straßenentwurf (7)
- Unterhaltung (7)
- Vehicle handling (7)
- Sichtbarkeit (7)
- Österreich (7)
- Adolescent (6)
- Aufprallschlitten (6)
- Ausrüstung (6)
- Automatische Notbremsung (6)
- Autonomes Fahren (6)
- China (6)
- Correlation (math, stat) (6)
- Deformierbare Barriere (Anpralltest) (6)
- Distraction (6)
- Driver training (6)
- Emission (6)
- Environment (6)
- Equipment (6)
- Fahrausbildung (6)
- Fahrerinformation (6)
- Fire (6)
- Highway design (6)
- India (6)
- Indien (6)
- Jugendlicher (6)
- Junction (6)
- Knie (menschl) (6)
- Location (6)
- Maintenance (6)
- Portugal (6)
- Probability (6)
- Reaction (human) (6)
- Reaktionsverhalten (6)
- Richtlinien (6)
- Road traffic (6)
- Schweden (6)
- Software (6)
- Steifigkeit (6)
- Stiffness (6)
- Surfacing (6)
- Vorn (6)
- Wahrscheinlichkeit (6)
- Wirksamkeitsuntersuchung (6)
- Abbiegen (5)
- Ablenkung (psychol) (5)
- Activity report (5)
- Analyse (Math) (5)
- Angle (5)
- Autonomous emergency braking (5)
- Bicycle (5)
- Body (car) (5)
- Classification (5)
- Condition survey (5)
- Damage (5)
- Deformable barrier (impact test) (5)
- Delivery vehicle (5)
- Detektion (5)
- Echtzeit (5)
- Eins (5)
- Einstellung (psychol) (5)
- Electronic stability program (5)
- Emergency (5)
- Ergonomics (5)
- Fahrrad (5)
- Fahrsimulator (5)
- Finite element method (5)
- Frau (5)
- Gefahrenabwehr (5)
- Gewicht (5)
- Intelligent transport system (5)
- Kamera (5)
- Karosserie (5)
- Kontrolle (5)
- Korrelation (math, stat) (5)
- LKW (5)
- Landstraße (5)
- Lebenszyklus (5)
- Lärm (5)
- Noise (5)
- Notfall (5)
- One (5)
- Post crash (5)
- Rehabilitation (5)
- Reproducibility (5)
- Reproduzierbarkeit (5)
- Rigid pavement (5)
- Rural road (5)
- Sachschaden (5)
- Schutzeinrichtung (5)
- Security (5)
- Simulator (driving) (5)
- Straßenverkehrsrecht (5)
- United Kingdom (5)
- Weight (5)
- Winkel (5)
- Zustandsbewertung (5)
- Abdomen (4)
- Absorption (4)
- Anti locking device (4)
- Attitude (psychol) (4)
- Betonstraße (Oberbau) (4)
- Bremse (4)
- Bus (4)
- Camera (4)
- Coefficient of friction (4)
- Collision test (veh) (4)
- Communication (4)
- Contact (tyre road) (4)
- Crashtest (4)
- Decision process (4)
- Decke (Straße) (4)
- Dynamics (4)
- Dynamik (4)
- Eigenschaft (4)
- Electric vehicle (4)
- Elektrofahrzeug (4)
- Elektronisches Stabilitätsprogramm (4)
- Enforcement (law) (4)
- Entscheidungsprozess (4)
- Erziehung (4)
- Estimation (4)
- Fahrdatenschreiber (4)
- Fahrgeschicklichkeit (4)
- Feuer (4)
- France (4)
- Frankreich (4)
- Frequency (4)
- Führerschein (4)
- Gesetzesdurchführung (4)
- Highway (4)
- In situ (4)
- Information (4)
- Klassifizierung (4)
- Kommunikation (4)
- Kraftfahrzeug (4)
- Medical aspects (4)
- Medizinische Gesichtspunkte (4)
- Messgerät (4)
- Methode der finiten Elemente (4)
- Occupant (veh) (4)
- Official approval (4)
- Organisation (4)
- Planning (4)
- Planung (4)
- Properties (4)
- Quality (4)
- Quality assurance (4)
- Qualität (4)
- Qualitätssicherung (4)
- Real time (4)
- Regression analysis (4)
- Regressionsanalyse (4)
- Rehabilitation (road user) (4)
- Reibungsbeiwert (4)
- Road construction (4)
- Road network (4)
- Safety fence (4)
- Schallpegel (4)
- Seite (4)
- Severity (acid (4)
- Sound level (4)
- Straße (4)
- Straßennetz (4)
- Surveillance (4)
- Sweden (4)
- Temperatur (4)
- Traffic (4)
- Traffic engineering (4)
- Traffic regulations (4)
- Umwelt (4)
- Unfallfolgemaßnahme (4)
- Unterleib (4)
- Verkehr (4)
- Wet road (4)
- Woman (4)
- Accuracy (3)
- Air pollution (3)
- Antiblockiereinrichtung (3)
- Apparatus (measuring) (3)
- Arzneimittel (3)
- Attention (3)
- Aufmerksamkeit (3)
- Bau (3)
- Bauwerksmonitoring (3)
- Bearing capacity (3)
- Befreiung (Bergung) (3)
- Bein (3)
- Beton (3)
- Blickfeld (3)
- Boden (3)
- Brake (3)
- Brücken Management System (3)
- Capacity (road, footway) (3)
- Carbon dioxide (3)
- Coach (3)
- Concrete (3)
- Construction (3)
- Cost (3)
- Crash Test (3)
- Crash test (3)
- Czech Republic (3)
- Data base (3)
- Deicing (3)
- Digitale Bildverarbeitung (3)
- Driving aptitude (3)
- Education (3)
- Effectiveness (3)
- Empfindlichkeit (3)
- Entdeckung (3)
- Ergonomie (3)
- Event data recorder (road vehicle) (3)
- Extrication (3)
- Fahrbahnüberquerung (3)
- Fahrtauglichkeit (3)
- Field of vision (3)
- Frequenz (3)
- Griffigkeit (3)
- Hinten (3)
- Information documentation (3)
- Intelligentes Transportsystem (3)
- Intersection (3)
- Jahreszeit (3)
- Kapazität (Straße) (3)
- Kleidung (3)
- Kontakt Reifen Straße (3)
- Korea (Süd) (Demokratische Republik) (3)
- Kosten (3)
- Kunststoff (3)
- Lenken (Fahrzeug) (3)
- Level of service (3)
- Lieferfahrzeug (3)
- Life cycle (3)
- Luftverunreinigung (3)
- Main road (3)
- Man (3)
- Mann (3)
- Medication (3)
- Medizinische Untersuchung (3)
- Mobility (3)
- Mobilität (3)
- Nasse Straße (3)
- Oberbau (3)
- Overlapping (3)
- Passenger (3)
- Pavement (3)
- Plastic material (3)
- Prototyp (3)
- Prototype (3)
- Rear (3)
- Reifen (3)
- Reisebus (3)
- Republic of Korea (3)
- Run off the road (accid) (3)
- Season (3)
- Sensitivity (3)
- Skidding resistance (3)
- Skill (road user) (3)
- Soil (3)
- Spain (3)
- Spanien (3)
- Steering (process) (3)
- Straßenverkehr (3)
- Structural health monitoring (3)
- Sustainability (3)
- Telematics (3)
- Telematik (3)
- Temperature (3)
- Theorie (3)
- Theory (3)
- Time (3)
- Traffic control (3)
- Traffic count (3)
- Tragfähigkeit (3)
- Trend (stat) (3)
- Tschechische Republik (3)
- Tyre (3)
- United kingdom (3)
- Unterfahrschutz (3)
- Verkehrserhebung (3)
- Verkehrsqualität (3)
- Verkehrssteuerung (3)
- Verschiebung (3)
- Versuchspuppe (3)
- Visual display (3)
- Vorne (3)
- Windschutzscheibe (3)
- Zeit (3)
- Abfluss (2)
- Abkommen von der Fahrbahn (Unfall) (2)
- Ablenkung (2)
- Abstandsregeltempomat (2)
- Accompanied driving (2)
- Adult (2)
- Advanced driver assistance system (2)
- Anthropmetric dummy (2)
- Asphaltstraße (Oberbau) (2)
- Auftaumittel (2)
- Australia (2)
- Australien (2)
- Autonomes Fahrzeug (2)
- Autonomous vehicle (2)
- Battery (2)
- Baumusterzulassung (2)
- Begleitetes Fahren (2)
- Behinderter (2)
- Beinahe Unfall (2)
- Bicyclist (2)
- Bildschirm (2)
- Blutkreislauf (2)
- Brand (2)
- Bremsweg (2)
- Bridge deck (2)
- Bridge management system (2)
- Bruch (mech) (2)
- Calibration (2)
- Circulation (blood) (2)
- Climate change (2)
- Clothing (2)
- Compliance (specif) (2)
- Comprehension (2)
- Compression (2)
- Continuous (2)
- Cooperative intelligent transport system (2)
- Crash victim (2)
- Cross roads (2)
- Crossing the road (2)
- Cycle track (2)
- Cycling (2)
- Data processing (2)
- Data transmission (telecom) (2)
- Datenbasis (2)
- Datenverarbeitung (2)
- Datenübertragung (telekom) (2)
- Dehnungsmessstreifen (2)
- Depth (2)
- Deterioration (2)
- Deutschalnd (2)
- Diesel engine (2)
- Digital image processing (2)
- Disablement (2)
- Dreidimensional (2)
- Driving licence (2)
- Driving license (2)
- Driving test (2)
- Droge (2)
- Drugs (2)
- EU directive (2)
- EU-Richtlinie (2)
- Edge (2)
- Eichung (2)
- Eindringung (2)
- Eingabedaten (2)
- Electric bicycle (2)
- Electronic driving aid (2)
- Elektrofahrrad (2)
- Energie (2)
- Energy (2)
- Environment protection (2)
- Erwachsener (2)
- Eu (2)
- Exhaust aftertreatment (2)
- Experience (human) (2)
- Expert system (2)
- Expertensystem (2)
- Fahrbahnmarkierung (2)
- Fahrbahntafel (2)
- Fahrprüfung (2)
- Fahrstreifen (2)
- Fahrzeugteil (Sicherheit) (2)
- Fernverkehrsstraße (2)
- Festigkeit (2)
- Foot (not a measure) (2)
- Form (2)
- Fuel consumption (2)
- Fuß (2)
- Führerscheinentzug (2)
- Geländefahrzeug (2)
- Genauigkeit (2)
- Gesetzesübertretung (2)
- Government (national) (2)
- Greenhouse effect (2)
- Grenzwert (2)
- Haftung (jur) (2)
- Harmonisation (2)
- Hazard (2)
- Head restraint (2)
- Headlamp (2)
- Heavy metal (2)
- In service behavior (2)
- Incident detection (2)
- Incident management (2)
- Input data (2)
- Interface (2)
- Italien (2)
- Italy (2)
- Klimawandel (2)
- Knie (2)
- Kohlendioxid (2)
- Kontakt Reifen-Straße (2)
- Kontinuierlich (2)
- Kopfstütze (2)
- Kreuzung (2)
- Langfristig (2)
- Layout (2)
- Learning (2)
- Leuchtdichte (2)
- Liability (2)
- Limit (2)
- Long term (2)
- Luminance (2)
- Market (2)
- Markt (2)
- Medical examination (2)
- Mensch Maschine Verhältnis (2)
- Methode der finite Elemente (2)
- Mittelwert (2)
- Mobile phone (2)
- Mobiltelefon (2)
- Model (not math) (2)
- Modell (2)
- Motorisierungsgrad (2)
- Movement (2)
- Nacht (2)
- Near miss (2)
- Netherlands (2)
- Network (traffic) (2)
- Niederlande (2)
- Night (2)
- Oberfläche (2)
- Offence (2)
- Offender (2)
- Organization (association) (2)
- Output (2)
- Parken (2)
- Parking (2)
- Pavement Management System (2)
- Pavement design (2)
- Pavement management system (2)
- Penetration (2)
- Pollutant (2)
- Posture (2)
- Public transport (2)
- Radfahren (2)
- Radio (2)
- Radweg (2)
- Rain (2)
- Rear view mirror (2)
- Recidivist (2)
- Recording (2)
- Regen (2)
- Regierung (staat) (2)
- Reinforcement (in mater) (2)
- Restraint system (2)
- Risk taking (2)
- Run off (2)
- Rundfunk (2)
- Rückfalltäter (2)
- Rückspiegel (2)
- Schadstoff (2)
- Schall (2)
- Scheinwerfer (2)
- Schutz (2)
- Schwermetall (2)
- Seat belt (2)
- Service area (2)
- Service life (2)
- Side (2)
- Sociology (2)
- Sound (2)
- Soziologie (2)
- Sport utility vehicle (2)
- Spreading (2)
- Stadt (2)
- Statistical analysis (2)
- Statistische Analyse (2)
- Stochastic process (2)
- Stochastischer Prozess (2)
- Strain gauge (2)
- Straßenbau (2)
- Strength (mater) (2)
- Stress (psychol) (2)
- Störfallentdeckung (2)
- Störfallmanagement (2)
- Surface (2)
- Tank Rast Anlage (2)
- Telefon (2)
- Telekommunikation (2)
- Telephone (2)
- Three dimensional (2)
- Tiefe (2)
- Toxicity (2)
- Toxizität (2)
- Traffic lane (2)
- Traffic restraint (2)
- Treibhauseffekt (2)
- Turn (2)
- Turning (2)
- Tyre tread (2)
- Tätigkeitsbericht (2)
- Umweltschutz (2)
- Underride protection (2)
- Unfallopfer (2)
- Untersuchung am unfallort (2)
- Urban area (2)
- Vehicle ownership (2)
- Vehicle safety device (2)
- Verkehrsbeschränkung (2)
- Verkehrsnetz (2)
- Verkehrstechnik (2)
- Verkehrsverflechtung (2)
- Verständnis (2)
- Verteilung (mater) (2)
- Wasser (2)
- Water (2)
- Windscreen (veh) (2)
- Zeitreihe (stat) (2)
- Zusammendrückung (2)
- Zusammenstoss (2)
- Öffentlicher Verkehr (2)
- Überlappung (2)
- (menschl) (1)
- Abgefahrener Reifen (1)
- Ability (road user) (1)
- Abkommen von der Fahrbahn (1)
- Abnutzung (1)
- Acceleration (1)
- Acceptability (1)
- Accessibility (1)
- Accident black spot (1)
- Accident proneness (1)
- Accident severity (1)
- Achslast (1)
- Active safety (1)
- Active safety system; Automatic; Brake; Car; Collision avoidance system; Conference; Driver assistance system; Germany; Impact test (veh); Rear end collision; Severity (accid (1)
- Adaptation (psychol) (1)
- Adaptive cruise control (1)
- Adaptive cruise controll (1)
- Administration (1)
- Advanced vehicle control systems (1)
- Aged people (1)
- Aggression (psycho) (1)
- Aggression (psychol) (1)
- Air quality management (1)
- Air traffic control (1)
- Air transport (1)
- Airbag (restraint system) (1)
- Aktive Sicherheit (1)
- Alcolock (1)
- Alternative (1)
- Analyse (1)
- Analyses (math) (1)
- Anhänger (1)
- Ankündigung (1)
- Anordnung (1)
- Anpassung (psychol) (1)
- Anthropometrie (1)
- Anthropometry (1)
- Antiblockiersystem (1)
- Antikollisisonssystem (1)
- Apparatus (measurement) (1)
- Arbeitsgruppe (1)
- Arm (human) (1)
- Arm (menschl) (1)
- Articulated vehicle (1)
- Asset Management (1)
- Asset management (1)
- Asset management system (1)
- Atives Sicherheitssystem (1)
- Audit (1)
- Auffharunfall (1)
- Aufzeichnung (1)
- Aufzeichung (1)
- Augenbewegungen (1)
- Ausdehnung (mater) (1)
- Automotive Engineering (1)
- Autonomous emerhency braking (1)
- Autotür (1)
- Average (1)
- Axle load (1)
- Back (human) (1)
- Batterie (1)
- Baustelle (1)
- Baustoff (1)
- Bauweise (1)
- Beanspruchung (1)
- Bein [menschl] (1)
- Belohnung (Anreiz) (1)
- Bemessung des Straßenoberbaus (1)
- Benchmark (1)
- Bepflanzung (1)
- Berechnung d Straßenoberbaus (1)
- Beschleunigung (1)
- Bestrafung (1)
- Bevölkerung (1)
- Bewehrung (1)
- Bindemittel (1)
- Binder (1)
- Bitumen (1)
- Bituminous mixture (1)
- Bituminöses Mischgut (1)
- Black ice (1)
- Blind spot (veh) (1)
- Blood alcohol content (1)
- Blutalkoholgehalt (1)
- Bone (1)
- Brake light (1)
- Braking distance (1)
- Breaking (1)
- Breite (1)
- Bremslicht (1)
- Bridges (1)
- Budget (1)
- Bumper (1)
- Cadaver (1)
- Car door (1)
- Car park (1)
- Carriageway (1)
- Carriageway marking (1)
- Catalytic converter (1)
- Cervical vertebrae; Conference; Evaluation (assessment); Injury; Spinal column; Test (1)
- Chassis (1)
- Chest (1)
- Clay (1)
- Coefficient (1)
- Cognitive impairment (1)
- Cold (1)
- Collisison avoidance system (1)
- Colthing (1)
- Compatiblity (1)
- Computation (1)
- Concentration (chem) (1)
- Conference; Germany; Injury; Medical examination; Spinal column; X ray (1)
- Confiscation (driving licence) (1)
- Confiscation (driving license) (1)
- Congestion (traffic) (1)
- Construction method (1)
- Construction site (1)
- Consumer protection (1)
- Contact (tyre (1)
- Control (1)
- Cooling (mater) (1)
- Correlation (1)
- Correlation (math (1)
- Cracking (1)
- Critical path method (1)
- Crossing the road (pedestrian) (1)
- Damping (1)
- Data basis (1)
- Data collection (1)
- Datenübertragung (Telekom) (1)
- Dauer (1)
- Day (24 hour period) (1)
- Daylight (1)
- Decke [Straße] (1)
- Deformable barrier (Impact test) (1)
- Deformable barrier system (impact test) (1)
- Deformierte Barriere (Anpralltest) (1)
- Demand (econ) (1)
- Demografie (1)
- Demography (1)
- Density (1)
- Detection response task (1)
- Deutschland ; Konferenz (1)
- Diagnostik (1)
- Dichte (1)
- Dieselmotor (1)
- Diffusion (1)
- Digital computer (1)
- Digitalrechner (1)
- Dimension (1)
- Dispersion (stat) (1)
- Displacement (1)
- Disstraction (1)
- Distribution (gen) (1)
- Drainage (1)
- Driver (veh) (1)
- Driver information system (1)
- Driving aid (electronic) (1)
- Dränasphalt (1)
- Dtetection (1)
- Durchsichtigkeit (1)
- Dynamic penetration test (1)
- Dynamo (1)
- Dämpfung (1)
- Earthworks (1)
- Economic efficiency (1)
- Economics of transport (1)
- Ejection (1)
- Elastizitätsmodul (1)
- Electronics (1)
- Elektronik (1)
- Elektronische Deichsel (1)
- Elektronisches Stabilitätsprogram (1)
- Emergency medical aid (1)
- Engine capacity (1)
- Enteisung (1)
- Entgleisung (Zug) (1)
- Entwässerung (1)
- Erdarbeiten (1)
- Erfahrung (menschl) (1)
- Ermüdung (mater) (1)
- Ersatzfahraufgabe (1)
- European New Car Assessment Programme (1)
- Evaluation (Assessment) (1)
- Event data recorder (Road vehicle) (1)
- Expansion (1)
- Experimental road (1)
- Expert interview (1)
- Expressway (1)
- Eye movement (1)
- Face (human) (1)
- Facility (1)
- Fahrassistenzsystem (1)
- Fahrbahn (1)
- Fahrdynamik (1)
- Fahrererfahrung (1)
- Fahrerinformationen (1)
- Fahrerinformationssystem (1)
- Fahrleistung (1)
- Fahrstreifenwechsel (1)
- Fahrwerk (1)
- Fahrzeugbeleuchtung (1)
- Fahrzeugdach (1)
- Fahrzeugflotte (1)
- Fahrzeugrückhaltesystem (1)
- Fahrzeugsicherheit (1)
- Failure (1)
- Fatigue (human) (1)
- Fatigue (mater) (1)
- Fear (1)
- Fein (mater) (1)
- Feinstaub (1)
- Fence (1)
- Fernverkehrsstrasse (1)
- Field test (1)
- Financing (1)
- Finanzierung (1)
- Fine (mater) (1)
- Finland (1)
- Finnland (1)
- Fleet of vehicles (1)
- Flexible pavement (1)
- Flooding (1)
- Flugsicherung (1)
- Freeway (1)
- Freight transport (1)
- Friction (1)
- Fuel tank (1)
- Fuge (1)
- Fugenfüllung (1)
- Functional safety (1)
- Funktionale Sicherheit (1)
- Furcht (1)
- Future transport mode (1)
- Fußgängerbereich (1)
- Führerschein Punktesystem (1)
- Gap acceptance (1)
- Gas (1)
- Gefahr (1)
- Gelenkfahrzeug (1)
- Geografisches Information System (1)
- Geographical information system (1)
- Geomembran (1)
- Geomembrane (1)
- Geometry (shape) (1)
- Geotextil (1)
- Geotextile (1)
- Geradeausverkehr (1)
- Geschwindigkeitsbeschränkung (1)
- Gesicht (1)
- Gestaltung (1)
- Gesundheit (1)
- Glatteis (1)
- Great Britain (1)
- Grenzfläche (1)
- Ground water (1)
- Group analysis (test) (1)
- Großbritannien (1)
- Grundwasser (1)
- Güterverkehr (1)
- Harmonisierung (1)
- Harmonization (1)
- Head (human) (1)
- Health (1)
- Hearing (1)
- Height (1)
- Herausschleudern (1)
- Herstellung (1)
- Higway design (1)
- Hip (human) (1)
- Homogeneity (1)
- Homogenität (1)
- Hospitsl (1)
- Hubraum (1)
- Häufigkeit (1)
- Höhe (1)
- Hörvermögen (1)
- Hüfte (1)
- Hüfte (menschl) (1)
- Illness (1)
- Image analysis (1)
- Image generation (1)
- Image processing (1)
- Immission (1)
- Impact (collision) (1)
- Impact test (crash) (1)
- In Bewegung (1)
- Increase (1)
- Inertia reel safety belt (1)
- Infotainment System (1)
- Infotainment system (1)
- Injury) (1)
- Installation (1)
- Intelligentes Transport System (1)
- Intelligentes Verkehrssystem (1)
- Interactive model (1)
- Interaktives Modell (1)
- Inventar (1)
- Inventory (1)
- Ireland (1)
- Irland (1)
- Itinerary (1)
- Jahr (1)
- Joint (structural) (1)
- Klassifikation (1)
- Kleintransporter (1)
- Knochen (1)
- Koeffizient (1)
- Kognitive Aufgabenanforderung (1)
- Kognitive Beeinträchtigung (1)
- Kolmatierung (1)
- Kompatiblität (1)
- Konzentration (1)
- Kopf (menschl) (1)
- Korea (Süd) (1)
- Korn (1)
- Kornverteilung (1)
- Korrelation (math (1)
- Korrelation [math (1)
- Korrelation(Math (1)
- Kosten Nutzen Vergleich (1)
- Kraftstofftank (1)
- Kraftstoffverbrauch (1)
- Krankheit (1)
- Kreisverkehrsplatz (1)
- Kälte (1)
- Körperhaltung (1)
- Körperstellung (1)
- Kühlung (mater) (1)
- Laboratorium (1)
- Laboratory (not an organization) (1)
- Laborexperiment (1)
- Lane changing (1)
- Lap strap (1)
- Laser (1)
- Lateral (1)
- Lateral collision (1)
- Layer (1)
- Lebensdauer (1)
- Left turn (1)
- Leichnam (1)
- Leistungsfähigkeit (Allg.) (1)
- Length (1)
- Lernen (1)
- Lifecycle (1)
- Links (1)
- Literaturanalyse (1)
- Literature review (1)
- Luftreinhaltung (1)
- Lufttransport (1)
- Länge (1)
- Lärmschutzwand (1)
- Maintenance management (1)
- Malaysia (1)
- Man-machine interface (1)
- Manufacture (1)
- Massenunfall (1)
- Material (constr) (1)
- Materialveraenderung (allg) (1)
- Materialveränderung (allg) (1)
- Mathematical Model (1)
- Matrix (1)
- Mean (math) (1)
- Mensch-Maschine-Interaktion (1)
- Mensch-Maschine-Schnittstelle (1)
- Merging (1)
- Merging traffic (1)
- Text (1)
- Mesurement (1)
- Metal bridge (1)
- Mix design (1)
- Modulus of elasticity (1)
- Montage (1)
- Moped (1)
- Motor (1)
- Moving (1)
- Multiple collision (1)
- Müdigkeit (1)
- Nachfrage (1)
- Nachhaltige Entwicklung (1)
- Nachhaltigkeit (1)
- Nachricht (1)
- Nasse Strasse (1)
- Netzplantechnik (1)
- Neural network (1)
- Neuronales Netz (1)
- Nigeria (1)
- Nitric acid (1)
- Nitrogen oxide (1)
- Noise barrier (1)
- Non destructive testing (1)
- Nordamerika (1)
- North America (1)
- Norway (1)
- Norwegen (1)
- Nummer (1)
- Nutzwertanalyse (1)
- OECD (1)
- Occupant (1)
- Offset impact test (1)
- On the left (1)
- On the right (1)
- On the scene accident investigation (1)
- On the spot investigation (1)
- Optimum (1)
- Optische Anzeige (1)
- Organization (1)
- Orthotrope Platte (1)
- Orthotropic plate (1)
- Overtaking (1)
- Overturning (1)
- Oxygen (1)
- Ozon (1)
- Ozone (1)
- PVC (1)
- Padding (safety) (1)
- Parkfläche (1)
- Particle (1)
- Particle size distribution (1)
- Particulate matter (1)
- Partnerschaft (1)
- Partnership (1)
- Peak hour (1)
- Peat (1)
- Pedestrian precinct (1)
- Pelvis (1)
- Penalty (1)
- Personal (1)
- Personnel (1)
- Pfahl (1)
- Pfosten (1)
- Pile (1)
- Platooning (electronic) (1)
- Platte (1)
- Point demerit system (1)
- Poland (1)
- Pole (1)
- Polen (1)
- Police (1)
- Politics (1)
- Polizei (1)
- Pollution (1)
- Pollution concentration (1)
- Polyvinylchloride (1)
- Population (1)
- Porous asphalt (1)
- Portable (1)
- Position (1)
- Pregnancy (1)
- Preloading (soil) (1)
- Prestressed (1)
- Prestressed concrete (1)
- Probe (1)
- Productivity (1)
- Protective helmet (1)
- Provisorisch (1)
- Prüefverfahren (1)
- Pssives Sicherheitssystem (1)
- Psychological aspects (1)
- Psychologische Gesichtspunkte (1)
- QAccident (1)
- Quality management system (1)
- Qualitätsmanagementsystem (1)
- Rail bound transport (1)
- Rail traffic (1)
- Rammsondierung (1)
- Reaction (chem.) (1)
- Reaktion (chem) (1)
- Real-time (1)
- Rechts (1)
- Rechtsübertreter (1)
- Rechtübertreter (1)
- Reconstruction [accid] (1)
- Reduction (decrease) (1)
- Reflectivity (1)
- Reflectorized material (1)
- Reflexionsgrad (1)
- Reflexstoffe (1)
- Regional planning (1)
- Regionalplanung (1)
- Rehabilitation (Road user) (1)
- Reibung (1)
- Reifenprofil (1)
- Reinforcement (1)
- Reiseweg (1)
- Republic of Corea (1)
- Research (1)
- Research projekt (1)
- Residential area (1)
- Resilience (1)
- Resilienz (1)
- Resuscitation (1)
- Reversing (veh) (1)
- Reward (1)
- Rib (1)
- Richtlinie (1)
- Rinanalyse (1)
- Rippe (menschl) (1)
- Risikoverhalten (1)
- Rissbildung (1)
- Road (1)
- Road Construction (1)
- Road construction site (1)
- Road heating (1)
- Road marking (1)
- Road transport (1)
- Roadbase (1)
- Roadside (1)
- Robot (1)
- Roboter (1)
- Roll over (veh) (1)
- Rolling resistance (1)
- Rollwiderstand (1)
- Roof (veh) (1)
- Rotation (1)
- Roundabout (1)
- Rsk (1)
- Rupture (1)
- Röntgenstrahlung (1)
- Rücken (1)
- Rücksichtslosigkeit (1)
- Rückwärtsfahren (1)
- SAE Level (1)
- Safety glass (1)
- Safety harness (1)
- Safety system (1)
- Saftey (1)
- Salpetersäure (1)
- Sample (mater) (1)
- Sample (stat) (1)
- Sauerstoff (1)
- Schicht (1)
- Schienentransport (1)
- Schienenverkehr (1)
- Schleudertrauma (1)
- Schnittstelle (1)
- Schulter (1)
- Schwangerschaft (1)
- Schweiz (1)
- Schweregrad (UNfall (1)
- Schweregrad (Unfall, Verletzung (1)
- Schweregrad /Unfall (1)
- Schätzung (1)
- Sealing compound (1)
- Seat (1)
- Seat harness (1)
- Sensors (1)
- Settlement (1)
- Setzung (1)
- Severity (accid, injuy) (1)
- Shape (1)
- Shoulder (human) (1)
- Sicherheitsglas (1)
- Sicherheitspolsterung (1)
- Significance (1)
- Signifikanz (1)
- Silting (1)
- Size and weight regulations (1)
- Slab (1)
- Social factors (1)
- Soziale Faktoren (1)
- Spannbeton (1)
- Specification (standard ) (1)
- Spectrum (1)
- Speed limit (1)
- Speed) (1)
- Spektrum (1)
- Spinal calum (1)
- Sri Lanka (1)
- Stadardization (1)
- Stadtplanung (1)
- Staggered junction (1)
- Stahl (1)
- Stahlbrücke (1)
- Stand der Technik (Bericht) (1)
- Standard (1)
- Standard test run (1)
- Standardabweichung (1)
- Stapedius reflex (1)
- Stapediusreflex (1)
- Stat) (1)
- State of the art report (1)
- Statistik (math) (1)
- Steel (1)
- Stichprobe (1)
- Stickoxid (1)
- Stopping distance (1)
- Stoßstange (1)
- Straight ahead (traffic) (1)
- Strasse (1)
- Straßenheizung (1)
- Straßenseitenfläche (1)
- Straßentransport (1)
- Strength ; Tension (1)
- Stress (1)
- Stress (psycho) (1)
- Subsoil (1)
- Surrogate driving set-up (1)
- Switzerland (1)
- Systemanalyse (1)
- Systems analysis (1)
- Tactile perception (1)
- Tag (24 Stunden) (1)
- Tageslicht (1)
- Taktiles Signal (1)
- Technische Vorschriften (1)
- Telecommunication (1)
- Telecomunication (1)
- Temperature measurement (1)
- Temperaturmessung (1)
- Temporary (1)
- Tension (1)
- Terrorism (1)
- Terrorismus (1)
- Test procedure (1)
- Thailand (1)
- Ton (Gestein) (1)
- Torf (1)
- Toter Winkel (1)
- Town planning (1)
- Tracking task (1)
- Trackingaufgabe (1)
- Traffic Engineering (1)
- Traffic concentration (1)
- Traffic regulation (1)
- Tragbar (1)
- Tragschicht (1)
- Train (1)
- Transparent (1)
- Transport (1)
- Transport mode (1)
- Transport operator (1)
- Transportunternehmen (1)
- Traveler (1)
- Two dimensional (1)
- Typenzulassung (1)
- Underride prevention (1)
- Unfallfolgephase (1)
- Unfallneigung (1)
- Unfallrate (1)
- Unfallrekonsruktion (1)
- Unfallschwerpunkt (1)
- Unfallverhuetung (1)
- Unfallverhütug (1)
- Ungeschützter Verkehrsteilnehmer (1)
- United Kindom (1)
- Untergrund (1)
- Untersuchung am Umfallort (1)
- Usa (1)
- Value analysis (1)
- Variable message signs (1)
- Variance analysis (1)
- Varianzanalyse (1)
- Vegetation (1)
- Vehicle lighting (1)
- Vehicle mile (1)
- Vehicle regulation (1)
- Vehicle restraint system (1)
- Vehicle safety (1)
- Veletzung) (1)
- Veraenderung (1)
- Verbraucherschutz (1)
- Vereinigtes Königreichl (1)
- Verfahen (1)
- Verfahren ; Verkehrsinfrastruktur (1)
- Vergrößerung (1)
- Verkehrsmittel (1)
- Verkehrsspitze (1)
- Verkehrsstauung (1)
- Verkehrsstärke (1)
- Verkehrswirtschaft (1)
- Vermeidung (1)
- Verschmutzung (1)
- Versetzte Kreuzung (1)
- Verstärkung (1)
- Verstärkung (Brücke) (1)
- Versuchsstrecke (1)
- Verteilung (allg) (1)
- Verwaltung (1)
- Vibration (1)
- Video camera (1)
- Virtual reality (1)
- Virtuelle Realität (1)
- Viskosity (1)
- Viskosität (1)
- Visualisation (1)
- Visualisierung (1)
- Vorbelastung (Boden) (1)
- Vorspannung (1)
- Vulnerable road user (1)
- Warning (1)
- Wear (1)
- Wechselverkehrszeichen (1)
- Wetter (1)
- Whiplash injury (1)
- Width (1)
- Wind (1)
- Window (veh) (1)
- Winter (1)
- Wirkungsanalyse (1)
- Wirtschaftlichkeit (1)
- Wohngebiet (1)
- Women (1)
- Working group (1)
- Year (1)
- Zahl (1)
- Zeitlückenakzeptanz (1)
- Zerstörungsfreie Prüfung (1)
- Zug (Eisenbahn) (1)
- Zug (mech) (1)
- Zugänglichkeit (1)
- Zukünftiges Verkehrsmittel (1)
- Zulassung (tech) (1)
- Zusammensetzung (1)
- ZusammenstoÃüï-¿-½Ãƒ-¯Ã‚-¿Ã‚-½ (1)
- Zweidimensional (1)
- accident (1)
- aktives Sicherheitssystem (1)
- analyses (math) (1)
- ar (1)
- driving dynamics (1)
- efficiency (1)
- fatality (1)
- finite element method (1)
- head (1)
- human-machine interaction (1)
- road) (1)
- simulation (1)
- stat) (1)
- stat] (1)
- trailer (1)
- tödlicher Unfall (1)
- vehicle safety (1)
- Überdeckung (1)
- Überholen (1)
- Überschwemmung (1)
Institut
- Sonstige (337)
- Abteilung Fahrzeugtechnik (126)
- Abteilung Verhalten und Sicherheit im Verkehr (23)
- Abteilung Brücken- und Ingenieurbau (22)
- Abteilung Straßenverkehrstechnik (22)
- Abteilung Straßenbautechnik (17)
- Präsident (9)
- Stabstelle Presse und Öffentlichkeitsarbeit (6)
- Stabstelle Forschungscontrolling, Qualitätsmanagement (1)
Having a look at safety to traffic and the prevention of accidents it can be observed that technical improvements in active safety of vehicles have let to various positive effects in this area. Among other components the tyre-road-contact takes a key role in the development of active safety technologies. All forces in accelerating, breaking and vehicle guidance have to be transmitted through the tyre-road contact area by friction forces. A common way to characterize a friction process is to identify the coefficient of friction μ between two touching materials. Even though there are several approaches to experimentially characterise road surfaces, no standard method exists. In this paper an overview of existing test methods is given. Furthermore the preliminary design of a newly developed portable test device with its possibility to investigate the tyre-road-friction of arbitrary roads or even places of accidents is shown.
From an automotive safety occupant protection standpoint, effective occupant restraint requires a system capable of providing non-injurious occupant ride down of anticipated crash forces. This is not only the case for frontal collisions, where occupant restraint is provided primarily by seatbelts and airbags, but is also critical for other crash modes such as side impacts, rear impacts, rollovers, as well as multiple impact events. In the rear impact crash mode, occupant restraint is provided primarily by the seatbacks and to some extent the seatbelts. Foundationally, therefore, what becomes fundamental to the seatback's role in rear occupant protection is its ability to contain the occupant within the seat, preventing occupant ramping, as well as preventing the seat's, and/or its occupant's, dangerous intrusion into the rear occupant's survival space where contact with rear compartment components and/ or rear seated occupants can present a significant injury risk. An analysis is presented of a series of rear impact sled testing conducted by the authors that evaluates the timing, position and extent of the front seatback's reward displacement toward and into the rear occupant compartment as well as consideration of the front seat occupant' ramping potential and its injury potential relative to the rear compartment. Additionally, three other series of testing are presented which assess various seat designs occupant retention capabilities. Lastly, a matched-pair comparison test series is presented which evaluates occupant motion in rear impact with and without use of a typical vehicle body mounted 3-point seatbelt. Discussion of restraint system performance observed in all the testing is included along with ATD biofidelity and thigh-gap considerations. The data collected and presented includes accelerometer instrumentation and high speed video analysis.
Automotive interiors have long been a potentially injurious impact area to occupants during accidents, especially in the absence of adequate padding. The U.S. Federal Motor Vehicle Safety Standard (FMVSS) 201, Occupant Protection in Interior Impact, outlines test procedures and performance criteria in order to mitigate potentially injurious head impacts to interior surfaces. FMVSS 201 specifies a finite set of impact locations and applies to passenger vehicles of a specified year range and with a gross vehicle weight rating less than 10,000 lb. In this paper, two head impact test methodologies are presented, a pendulum-test device and a Free Motion Headform (FMH) launching device, which allows for dynamic, repeatable impact evaluation of various vehicle interior surfaces and their impact attenuation abilities. The presented testing includes multiple series that evaluate the effect of differing vehicle upper interior padding on occupant head injury. One study in particular, analyzes a head impact to the side header of a heavy truck (not included in FMVSS 201) during a 90 degree rollover. Additionally, two other series of tests are presented which assess the injury reduction effect of side airbags to near side as well as far side occupants in a side impact scenario. Lastly, a forensic analysis is presented which evaluates two possible head impact locations experienced in a real world accident by analysis of the resulting interior compartment damage utilizing the FMH launching device test method. The data collected and presented includes accelerometer instrumentation and high speed video analysis. These studies demonstrate that adequate padding and airbags are very effective at mitigating head injury potential at impact speeds of 12-25 mph (19-40 kph).
Providing effective occupant protection in rollover crashes requires supplying the occupant with a restraint system proven effective in the dynamic rollover accident mode. Preventing ejection and providing restraint sufficient to prevent potentially injurious contacts with both interior and exterior vehicle components is paramount for effective rollover occupant protection. Research has shown that the injury potential can be decreased by closely coupling the occupant to the seat. This paper focuses on the effect of restraint system slack and its relationship to occupant excursion and ejection potential during rollover. Various restraint system configurations are evaluated in rollover-type test environments. A review of prior research is presented prior to presenting new quasi-static vehicle inversion studies conducted with live surrogate occupants. Additionally, dynamic rollover testing utilizing anthropometric test devices (ATDs) is presented. The influence of belt looseness and effects of various restraint designs on the belted occupants' injury potential are discussed.
In Germany road tunnels on major roads which are longer than 400 m have to be monitored permanently. For that purpose the tunnels are equipped with a multitude of monitoring and detection systems whose data and messages are transmitted to tunnel control centres. Due to the higher traffic density, the increasing number of tunnels to be monitored and road users" demand of higher safety and security levels, the strains on operating staff of tunnel control centres have continuously been growing. Therefore, innovative approaches have been developed in two recent German research projects: RETISS " Real Time Security Management System, and ESIMAS " Real-time Safety Management System for road Tunnels. Both systems are designed to allow faster and more efficient reaction of tunnel operators in order to maintain the capacity and availability of transport infrastructures but also to improve the safety and security of road users.
Road authorities, freight, and logistic industries face a multitude of challenges in a world changing at an ever growing pace. While globalization, changes in technology, demography, and traffic, for instance, have received much attention over the bygone decades, climate change has not been treated with equal care until recently. However, since it has been recognized that climate change jeopardizes many business areas in transport, freight, and logistics, research programs investigating future threats have been initiated. One of these programs is the Conference of European Directors of Roads (CEDR) Transnational Research Programme (TRP), which emerged about a decade ago from a cooperation between European National Road Authorities and the EU. This paper presents findings of a CEDR project called CliPDaR, which has been designed to answer questions from road authorities concerning climate-driven future threats to transport infrastructure. Pertaining results are based on two potential future socio-economic pathways of mankind (one strongly economically oriented "A2" and one more balanced scenario "A1B"), which are used to drive global climate models (GCMs) producing global and continental scale climate change projections. In order to achieve climate change projections, which are valid on regional scales, GCM projections are downscaled by regional climate models. Results shown here originate from research questions raised by European Road Authorities. They refer to future occurrence frequencies of severely cold winter seasons in Fennoscandia, to particularly hot summer seasons in the Iberian Peninsula and to changes in extreme weather phenomena triggering landslides and rutting in Central Europe. Future occurrence frequencies of extreme winter and summer conditions are investigated by empirical orthogonal function analyses of GCM projections driven with by A2 and A1B pathways. The analysis of future weather phenomena triggering landslides and rutting events requires downscaled climate change projections. Hence, corresponding results are based on an ensemble of RCM projections, which was available for the A1B scenario. All analyzed risks to transport infrastructure are found to increase over the decades ahead with accelerating pace towards the end of this century. Mean Fennoscandian winter temperatures by the end of this century may match conditions of rather warm winter season experienced in the past and particularly warm future winter temperatures have not been observed so far. This applies in an even more pronounced manner to summer seasons in the Iberian Peninsula. Occurrence frequencies of extreme climate phenomena triggering landslides and rutting events in Central Europe are also projected to rise. Results show spatially differentiated patterns and indicate accelerated rates of increases.
The following paper presents the nature and mechanism of injuries sustained in frontal impacts, focusing on car to car impacts. It was found that the body regions most frequently sustaining severe to fatal injuries were the legs and the thorax. The nature and mechanism of the injury sustained was investigated only for the thorax injuries, due to their potentially life threatening nature. The analysis revealed that the most frequent cause of the injury recorded was the seatbelt for low severity injuries and the front structure of the vehicle for higher severity injuries. An analysis of the effect of load limiter technology in the restraint system showed that the proportion of occupants who sustained "no thorax injury" did not increase when a load limiter was fitted to the restraint system. However, a decrease in the "organ" and "organ and skeletal" injuries was observed in the load limiter sample. Sample size and variation mean that these findings are not conclusive.
Motorcycle riders are one of the most vulnerable road users. Annually, on estimate 6000 people are killed in motorcycle accidents in the former 15 EU countries. The objective of this research was to investigate and analyze the main aspects and causes of this vulnerability and the accidents in general. For this aim around 70 accidents in The Netherlands were investigated in the framework of an international research program (MAIDS). Also a control group of motorcycles with riders was investigated so that exposure could be taken into account. An important result is that human failure is in 82% of the cases the main cause of the accident, in 52% this is due the other vehicle driver. Perception and decision failures are the most common failures. The most injuries are caused by the environment but they are typically only less severe (AIS1). Injuries caused by the car (front and side) are typically severe injuries (AIS4+). Previous convictions of the MC rider seem to be related to the chance to get involved in an accident. It was shown that the Dutch and the total MAIDS accident sample are comparable.
While many medical studies have dealt with the incidence, nature and treatment of polytrauma the injury-causing accident mechanisms are rarely discussed in detail, mostly due to the lack of documentation of the technical aspects. The present prospective study was started in late 2007 and collects data from traffic accidents with most severely injured in six south- German counties and two larger cities for the duration of one year. It is aimed at identifying and documenting all polytrauma cases (ISS ≥ 16) caused by traffic accidents and their crash circumstances. The data collection is based on an interdisciplinary concept to include both the police, emergency dispatch centers, hospitals and fire departments in the region and is completely anonymous. Potentially relevant cases where an emergency physician was called to the scene of a traffic accident are provided by the dispatch center. All three hospitals in the region suited for the treatment of polytraumatised patients record injuries, major diagnostic and surgery data. Data and images from the accident scene are provided by the police and by fire departments. The latter provide information which is usually not available from the police, like deployed airbags, vehicle extrication measures and detailed views of car interiors. The main objective of the study is to determine the structure of road users who sustain a polytrauma, their crash opponents and the injury patterns found in relation to the collision configuration and the protection by seat belts, air bags and other devices. With detailed documentation of vehicle damage and extrication measures the study is also intended to support the development of injury predictors for pre-hospital treatment and provide field data regarding further improvement of technical rescue.
A total survey of road traffic accidents involving most severely injured, defined as sustaining a polytrauma or severe monotrauma (ISS > 15) or being killed, was conducted over 14 months in a large study region in Germany. Data on injuries, pre-clinical and clinical care, crash circumstances and vehicle damage were obtained both prospectively and retrospectively from trauma centers, dispatch centers, police and fire departments. 149 patients with a polytrauma and eight with a severe monotrauma were recorded altogether. 22 patients died in hospital. Another 76 victims had deceased at the accident scene. In 2008, 49 % of patients treated with life-threatening injuries were car or van occupants, 21 % motorcyclists, 18 % cyclists and 10 % pedestrians. Among fatalities at the scene, vehicle occupants constituted an even larger portion. The number of road users with life-threatening trauma in the region was extrapolated to the German situation. It suggests that 10 % among the "seriously injured" as defined in national accident statistics are surviving accident victims with a polytrauma or severe monotrauma.
Pelvic fracture, cracking or breaking of a portion of the pelvis are extremely common injuries in the side impact collisions of motor vehicles. Due to both its shape and structural architecture, mechanics of the pelvic bone is complicated. There is a lack of knowledge regarding the dynamic behavior of the pelvis and its biomechanical tolerance under impact environment. Hence this study is aimed at the understanding of the mechanical response of the human pelvis with three-dimensional finite element (FE) models, under side impact load, applied through a structure, equivalent to a car door. The door structure was modeled, considering few layers, consisting of foam (Styrodur®, 3035 CS), plastic (UHMWPE), steel, glass and steel, putting them in series. A soft tissue layer (equivalent to fat) was also considered on the greater trochanter location. These FE models (with and without the car door structure) were analyzed with ANSYS-LS-DYNA-® dynamic finite element software to compare the effect of the car door padding system for shock absorption. It was observed that with proper combination of shock absorbing material (foam, etc.) and its thickness, the transmission of impact load to the body part (pelvis, etc.) from the outer surface of the car door could be reduced.
This paper reviews briefly the evolution of the investigation of transport accidents from the early beginnings when individual events were studied but systematic data was not collected. In the transport modes other than on the roads, accident investigation early on, even of single events, was important in introducing safety improvements. Road accidents, however, evolved enormously with the growth of car ownership without any comparable political response to the consequent deaths and injuries, equivalent to what happened with the other modes. From the 1950s data bases started to contribute to our knowledge of the epidemiology of road traffic injuries, and in-depth sample studies have contributed much to the body of knowledge in the last 30 years. However, even the basic input and output variables of a crash, its severity and the seriousness of the outcomes in terms of injuries and their consequences are not complete or agreed upon. Issues of experimental design and sampling are discussed. It is proposed that the most important area for current research to address is the effect of population variations on injury outcomes. The need for the establishment of good data bases for active safety issues is emphasised with the consequent need for better links between the research community and the police.
A means of assessing the passive safety of automobiles is a desirable instrument for legislative bodies, the automobile industry, and the consumer. As opposed to the dominating motor vehicle assessment criteria, such as engine power, spaciousness, aerodynamics and consumption, there are no clear and generally accepted criteria for assessing the passive safety of cars. The proposed method of assessment combines the results of experimental safety tests, carried out according to existing legally prescribed or currently discussed testing conditions, and a biomechanical validation of the loading values determined in the test. This evaluation is carried out with the aid of risk functions which are specified for individual parts of the body by correlating the results of accident analysis with those obtained by computer simulation. The degree of conformance to the respective protection criterion thus deduced is then weighted with factors which take into account the frequency of occurrence and the severity of the accident on the basis of resulting costs. Each of the test series includes at least two frontal and one lateral crash test against a deformable barrier. The computer-aided analysis and evaluation of the simulation results enables a vehicle-specific overall safety index as well as partial and individual safety values to be determined and plotted graphically. The passive safety provided by the respective vehicle under test can be defined for specific seating positions, special types of accident, or for individual endangered parts of the body.
This study aimed at developing an injury estimation algorithm for AACN technologies for Germany and compared them to findings based on Japanese data. The data to build and to verify the algorithm was obtained from the German in-depth Accident Database (GIDAS) and split into a training and a validation dataset. Significant input variables and the generalized linear regression model to predict severe injuries (ISS>15) were selected to maximize area under the receiver operating characteristic curve (AUC). Probit regression with the input parameter multiple impact, delta v, seatbelt use and impact direction gave the largest AUC of 0.91. Sensitivity of the algorithm was validated at 90% and specificity at 76% for an injury risk threshold of 2%. It appears that no major differences between Japan and Germany exist for injury estimation based on delta v and impact direction. However, far side impact and multiple crash events appear to be associated with a larger risk increase in the German data.
The German Federal Ministry of Economics and Technology is funding a projectrncalled "Leistra2" with the aim of understanding the tire road contact and to find measures to reduce traffic noise, in particular to reduce the noise of tires rolling on pavements, i.e. tire-road noise. The project is composed out of three mayor subjects, low noise tires, low noise pavements and verification of the results, each made out of single sub-projects. The purpose of this paper is to give a survey about Leistra2 and to report about the latest activities and results. More detailed information and contact data of the partners involved can be found at http://www. LeiStra2.de. The program is the successor of the program LeiStra (Leiser Strassenverkehr), dealing with similar topics.rn
The main objective of EC CASPER research project is to reduce fatalities and injuries of children travelling in cars. Accidents involving children were investigated, modelling of human being and tools for dummies were advanced, a survey for the diagnosis of child safety was carried out and demands and applications were analysed. From the many research tasks of the CASPER project, the intention of this paper is to address the following: • In-depth investigation of accidents and accident reconstruction. These will provide important points for the injury risk curve, in order to improve it. Different accident investigation teams collected data from real road accidents, involving child car passengers, in five different European countries. Then, a selection of the most appropriate cases for the injury risk curve and the purposes of the project was made for an in-depth analysis. The final stage of this analysis was to conduct an accident reconstruction to validate the results obtained. The in-depth analysis included on-scene accident investigation, creating virtual simulations of the accident/possible reconstruction, and conducting the reconstruction. In the cases of successful reconstructions, new points were introduced to the injury risk curves. Accident reconstructions of selected cases were carried out in test laboratories as the next step following in-depth road accident investigation. These cases were reconstructed using similar child restraint systems (CRS) and the same type make and model as in the real accidents. Reconstructing real cases has several limitations, such as crash angle, cars" approximation paths and crash speed. However, a few changes and applications on the testing conditions were applied to reduce the limitations and improved the representations of the real accidents. After conducting the reconstructions, a comparison between the deformations of the cars on the real accident and the vehicles from the reconstructions was made. Additionally, a correlation between the data captured from the dummies and the injury data from the real accident was sought. This finalises an in-depth analysis of the accident, which will provide new relevant points to the injury risk curve. The CASPER project conducted a large research programme on child safety. On technical points, a promising research area is the developing injury risk curves as a result of in-depth accident investigations and reconstructions. This abstract was written whilst the project was not yet finished and final results are not yet known, but they will be available by the time of the conference. All the works and findings will not necessarily be integrated in the industrial versions of evaluation tools as the CASPER project is a research program.
Causation patterns and data collection blind spots for fatal intersection accidents in Norway
(2010)
Norwegian fatal intersection accidents from the years 2005-2007 were analysed to identify any causation patterns among their underlying contributing factors, and also to evaluate whether the data collection and documentation procedures used by the Norwegian in-depth investigation teams produces the information necessary to perform causation pattern analysis. A total of 28 fatal accidents were analysed. Details on crash contributing factors for each driver in each crash were first coded using the Driving Reliability and Error Analysis Method (DREAM), and then aggregated based on whether the driver was going straight or turning. Analysis results indicate that turning drivers to a large extent are faced with perception difficulties and unexpected behaviour from the primary conflict vehicle, while at the same time trying to negotiate a demanding traffic situation. Drivers going straight on the other hand have less perception difficulties. Instead, their main problem is that they largely expect turning drivers to yield. When this assumption is violated, they are either slow to react or do not react at all. Contributing factors often pointed to in literature, e.g. high speed, drugs and/or alcohol and inadequate driver training, played a role in 12 of 28 accidents. While this confirms their prevalence, it also indicates that most drivers end up in these situations due to combinations of less auspicious contributing factors. In terms of data collection and documentation, information on blunt end factors (those more distant in time/space, yet important for the development of events) was more limited than information on sharp end factors (those close in time/space to the crash). A possible explanation is that analysts may view some blunt end factors as event circumstances rather than contributing factors in themselves, and therefore do not report them. There was also an asymmetry in terms of reported obstructions to view due to signposts and vegetation. While frequently reported as contributing for turning drivers, they were rarely reported as contributing for their counterparts in the same accidents. This probably reflects an involuntary focus of the analyst on identifying contributing factors for the driver legally held liable, while less attention is paid to the driver judged not at fault. Since who to blame often is irrelevant from a countermeasure development point of view, this underlying investigator mindset needs addressing to avoid future bias in crash investigation reports.
Due to the publication of guidelines in Germany the possibility exists to offer analytical designed construction works within an alternative proposal. But the extent to which the test specimen production influences the design relevant properties (for the same asphalt mixture) is not sufficiently investigated at present. Objective of this research project was to determine the design relevant asphalt properties by tests and do comparative considerations on two selected locations within the renewal of a federal trunk road (Germany). For the comparative consideration of the design relevant asphalt properties mixture samples were taken during paving and afterwards drill cores were taken at the same locations. Fatigue tests and tests to determine the stiffness were conducted with the Indirect Tensile Test (ITT). Then design calculations having regard to the test results were performed. At this different bearing conditions of the asphalt package were considered. The calculated fatigue conditions were comparative evaluated and they are presented and discussed in this paper.
Accident data shows that the vast majority of pedestrian accidents involve a passenger car. A refined method for estimating the potential effectiveness of a technology designed to support the car driver in mitigating or avoiding pedestrian accidents is presented. The basis of the benefit prediction method consists of accident scenario information for pedestrian-passenger car accidents from GIDAS, including vehicle and pedestrian velocities. These real world pedestrian accidents were first reconstructed and the system effectiveness was determined by comparing injury outcome with and without the functionality enabled for each accident. The predictions from Volvo Cars" general Benefit Estimation Model are refined by including the actual system algorithm and sensing models for a relevant car in the simulation environment. The feasibility of the method is proven by a case study on a authentic technology; the Auto Brake functionality in Collision Warning with Full Auto Brake and Pedestrian Detection (CWAB-PD). Assuming the system is adopted by all vehicles, the Case Study indicates a 24% reduction in pedestrian fatalities for crashes where the pedestrians were struck by the front of a passenger car.
Injury probability functions for pedestrians and bicyclists based on real-world accident data
(2017)
The paper is focusing on the modelling of injury severity probabilities, often called as Injury Risk Functions (IRF). These are mathematical functions describing the probability for a defined population and for possible explanatory factors (variables) to sustain a certain injury severity. Injury risk functions are becoming more and more important as basis for the assessment of automotive safety systems. They contribute to the understanding of injury mechanisms, (prospective) evaluation of safety systems and definition of protection criteria or are used within regulation and/or consumer ratings. In all cases, knowledge about the correlation between mechanical behavior and injury severity is needed. IRFs are often based on biomechanical data. This paper is focusing on the derivation of injury probability models from real world accident data of the GIDAS database (German In-depth Accident Study). In contrast to most academic terms there is no explicit term definition or definition of creation processes existing for injury probability models based on empirical data. Different approaches are existing for such kind of models in the field of accident research. There is a need for harmonization in terms of the used methods and data as well as the handling with the existing challenges. These are preparation of the dataset, model assumptions, censored/unknown data, evaluation of model accuracy, definition of dependent and independent variable, and others. In the presented study, several empirical, statistical and phenomenological approaches were analyzed regarding their advantages and disadvantages and also their applicability. Furthermore, the identification of appropriate prediction parameters for the injury severity of pedestrians has been considered. Due to its main effect on injuries of pedestrians and bicyclists, the importance of the secondary impact has also been analyzed. Finally, the model accuracy, evaluated by several criteria, is the rating factor that gives the quality and reliability for application of the resulting models. After the investigation and evaluation of statistical approaches one method was chosen and appropriate prediction variables were examined. Finally, all findings were summarized and injury risk functions for pedestrians in real world accidents were created. Additionally, the paper gives instructions for the interpretation and usage of such functions. The presented results include IRFs for several injury severity levels and age groups. The presented models are based on a high amount of real world accidents and describe very well the injury severity probability of pedestrians and bicyclists in frontal collisions with current vehicles. The functions can serve as basis for the evaluation of effectiveness of systems like Pedestrian-AEB or Bicycle-AEB.
The evaluation of the expected benefit of active safety systems or even ideas of future systems is challenging because this has to be done prospectively. Beside acceptance, the predicted real-world benefit of active safety systems is one of the most important and interesting measures. Therefore, appropriate methods should be used that meet the requirements concerning representativeness, robustness and accuracy. The paper presents the development of a methodology for the assessment of current and future vehicle safety systems. The variety of systems requires several tools and methods and thus, a common tool box was created. This toolbox consists of different levels, regarding different aspects like data sources, scenarios, representativeness, measures like pre-crash-simulations, automated crash computation, single-case-analyses or driving simulator studies. Finally, the benefit of the system(s) is calculated, e.g. by using injury risk functions; giving the number of avoided/mitigated accidents, the reduction of injured or killed persons or the decrease of economic costs.
The grip between the road surface and vehicle tires is the physical basis for the moving of all vehicles in road traffic. In case of an accident the available grip level is one of the most relevant influence factors, influencing the causation and the procedure of the accident. However, the estimation of the grip level is not easy and therefore, is commonly not done on the accident scene. This is especially true for the measurement of the water depth. Until now, real accident databases provide no measurement data about the grip level and the water film depth and thus, the estimation of its influence is not possible yet. From the tyre manufacturers point of view, it is important to know about the road conditions (namely grip level, macro-texture, water depth, temperature) at the accident scene, as well as the operating conditions of the vehicles (braking, loss of control, speed, etc). These data is necessary to define relevant tyre traction tests for the end-user and for regulations. For this reason VUFO and Michelin developed a consistent method for the measurements of grip level and water depth for the accidents of the GIDAS database. The accident research team of Dresden, which documents about 1000 accidents with at least one injured person every year, is measuring the micro-roughness and the macro-roughness directly on the spot. For the measurement of the micro-roughness a Skid Resistance Tester (British Pendulum) is used. The Mean Texture Depth (describing the macro-roughness) is measured by the Sand Depth Method. Since June 2009, measurements for more than 700 accidents including 1200 participants have been carried out. In case of wet or damp road conditions during the accident, the water depth is measured additionally. Therefore VUFO and Michelin developed a special measurement device, which allows measurements with an accuracy of 1/10 millimetre. The measurement point at the accident scene is clearly defined and thus, the results are comparable for all different accidents and participants. The use of the GIDAS database and the accident sampling plan allows representative statements for the German accident scenario. With this data it is possible for the first time to have an accurate view of the road conditions at the accident scene. One possibility is a more detailed estimation of hydroplaning accidents using the actually measured water depths. The development of new testing methods and new tires can be based on the real situation of the road infrastructure. Furthermore, the combination of the technical GIDAS data and the measured road surface properties can also be used for the estimation of effectiveness of several safety systems like the brake assist and/or emergency braking systems. The calculation of a reduced collision speed due to the use of a brake assist is only one example for the application of real measured grip level data.
Analysis of the accident scenario of powered two-wheelers on the basis of real-world accidents
(2013)
For the first time since 20 years the German national statistics of traffic accidents revealed an increasing number of fatalities and seriously injured persons in 2011. This negative development was especially caused by increasing numbers in all groups of vulnerable road users (VRU). Furthermore, the comparison of fatality reduction rates between several categories of road users shows that persons on motorcycles show the worst performance over years. Although every second fatality in German traffic accidents is still a car occupant, users of PTW make up more than 20% in the meantime. Assuming further improvements in the field of occupant protection this trend will continue. For that reason, a study on the basis of real-world accidents was conducted to describe the accident scenario involving motorcycles and to identify the reasons of the above-described fact. Approximately 1.800 motorcycle accidents out of GIDAS database were used for the analyses. The first part of the study deals with the question how representative the GIDAS database is for the German motorcycle accident scenario. Afterwards, detailed descriptive statistics on motorcycle accidents were presented considering numerous parameters about the accident scene, environmental influences, vehicle information, individual characteristics, interview data, injury severity and injury causation. One important point is the identification of the most frequent critical situations that are typical for motorcycle accidents. Furthermore, a special focus was on accident causation. Finally, conspicuous facts out of the analysis are emphasized. All in all, the study gives a comprehensive overview about the German motorcycle accident scenario. One the one hand, the use of weighted GIDAS data allows representative and robust statements on the basis of large case numbers; on the other hand highly detailed conclusions can be drawn. The results of the study help to understand the particularities of motorcycle accidents and provide approaches for further improvements in the field of PTW safety.
The paper presents a methodology for the benefit estimation of several secondary safety systems for pedestrians, using the exceptional data depth of GIDAS. A total of 667 frontal pedestrian accidents up to 40kph and more than 500 AIS2+ injuries have been considered. In addition to the severity, affected body region, exact impact point on the vehicle, and the causing part of every injury, the related Euro NCAP test zone was determined. One results of the study is a detailed impact distribution for AIS2+ injuries across the vehicle front. It can be stated, how often a test zone or vehicle part is hit by pedestrians in frontal accidents and which role the ground impact plays. Basing on that, different secondary safety measures can be evaluated by an injury shift method concerning their real world effectiveness. As an example, measures concerning the Euro NCAP pedestrian rating tests have been evaluated. It was analysed which Euro NCAP test zones are the most effective ones. In addition, real test results have been evaluated. Using the presented methodology, other secondary safety like the active bonnet (pop-up bonnet) or a pedestrian airbag measures can be evaluated.
The declining trend since 1991 in the number of killed people was broken in 2011 when overall 4 009 people died in traffic accidents in Germany. The question arises if there is a stagnating trend of fatalities in Germany in future? By breaking down the accidents with casualties towards a monthly view one can see a decreasing trend of fatalities in the warmer months especially since 2009. When comparing against winter months higher deviations are observed. In December 2011 an increase of 191 traffic deaths were registered (181 in 2010 compared to 372 in 2011). Further analyses of different accident influences were evaluated and their possibility of drastic change from one year to the other was determined. As seen weather- and environmental conditions are one of the major contributing factors and are one of the causes for the increased number of fatalities. To support the underlying assumption a model had been created to calculate the number of traffic deaths on a daily basis approach. As an input, road conditions projected through weather parameters and also different driving behaviors on weekdays or holidays were used. As a result, estimates of daily fatality with up to 75% precision can be achieved out of the 2009, 2010 and 2011 data. Further on it shows that weather and street conditions have a high influence on the overall resulting number of traffic accidents with casualties, and especially to the number of fatalities. Hence it is estimated that approximately 3 300 people were killed in traffic accidents in Germany in 2013 which would be again a reduction of another 13% compared to 2012. Therefore an answer to the question will be that the decreasing trend in traffic fatalities in Germany somehow is not broken when environmental conditions are included in national statistics. Their effects will become more visible in future accident statistics and it is estimated variances of 5% to 8% of the annual number of traffic fatalities in Germany will be seen.
The paper aims to study the injury risk and kinematics of pedestrians involved in different passenger vehicle collisions. Furthermore, the difference of pedestrian kinematics in the accidents involved minivan and sedan was analyzed. The 18 sample cases of passenger car to pedestrian collisions were selected from the database of In-depth Investigation of Vehicle Accident in Changsha of China (IVAC),of which the 12 pedestrian accidents involved in a minivan impact for each case, and the 6 accidents in a sedan impact for each. The selected cases were reconstructed by using mathematical models of pedestrians and accident vehicles in a multi-body dynamic code MADYMO environment. The logistic regression models of the risks for pedestrian AIS 3+ injuries and fatalities were developed in terms of vehicle impact speed by analyzing the minivan-pedestrian and sedan-pedestrian accidents. The difference of pedestrian kinematics was identified by comparing the results from reconstructed pedestrian accidents between the minivans and sedans collisions. The result shows that there is a significant correlation among the impact speed and the severity of pedestrian injuries. The minivan poses greater risk to pedestrian than sedan at the same impact speed. The kinematics of pedestrian was greatly influenced by vehicle front shape.
The GRSP informal group on child restraint systems (CRS) finalised phase 1 of a new regulation for the homologation of CRS . This regulation is the subject of several discussions concerning the safety benefits and the advantages and disadvantages that certain specific points may bring. However, these discussions are sometimes not based on scientific facts and do not consider the whole package but only single items. Based on the experience of the CASPER partners in the fields of human behaviour, accident analysis, test procedures and biomechanics in the area of child safety, a consideration of the safety benefits of phase 1 of the new regulation and recommendations for phase 2 will be given.
Topics of this report are: Road construction (highways, interstate roads, urban by-passes, cycle tracks, construction sites, level crossings removal), traffic management systems, road tunnel equipment, harmonisation of vehicle regulations, accident statistics and accident research, passive vehicle safety, active vehicle safety , automotive environmental protection and rescue systems.
Annually within the European Union, there are over 50,000 road accident fatalities and 2 million other casualties, of which the majority are either the occupants of cars or other road users in collision with a car. The European Commission now has competency for vehicle-based injury countermeasures through the Whole Vehicle Type Approval system. As a result, the Commission has recognised that casualty reduction strategies must be based on a full understanding of the real-world need under European conditions and that the effectiveness of vehicle countermeasures must be properly evaluated. The PENDANT study commenced in January 2003 in order to explore the possibility of developing a co-ordinated set of targeted, in-depth crash data resources to support European Union vehicle and road safety policy. Three main work activity areas (Work Packages) commenced to provide these resources. This paper describes some of the outcomes of Work Package 2 (WP2, In-depth Crash Investigations and Data Analysis). In WP2, some 1,100 investigations of crashes involving injured car occupants were conducted in eight EU countries to a common protocol based on that developed in the STAIRS programme. This paper describes the purposes, methodology and results of WP2. It is expected that the results will be used as a co-ordinated system to inform European vehicle safety policy in a systematic, integrated manner. Furthermore, the results of the data analyses will be exploited further to provide new directions to develop injury countermeasures and regulations.
Interaction of road environment, vehicle and human factors in the causation of pedestrian accidents
(2005)
The UK On-the-Spot project (OTS) completed over 1500 in-depth investigations of road accidents during 2000-2003 and is continuing for a further 3 years. Cases were sampled from two regions of England using rotating shifts to cover all days of the week and all hours of the day and night. Research teams were dispatched to accidents notified to police during the shifts; arrival time to the scene of the accident was generally less than 20 minutes. The methodology of OTS includes sophisticated systems for describing accident causation and the interaction of road, vehicle and human factors. The purpose of this paper is to describe and illustrate these systems by reference to pedestrian accidents. This type of analysis is intended to provide an insight into how and why pedestrian accidents occur in order to assist the development of effective road, vehicle and behavioural countermeasures.
It is well known that most accidents with pedestrians are caused by the driver not being alert or misinterpreting the situation. For that reason advanced forward looking safety systems have a high potential to improve safety for this group of vulnerable road users. Active pedestrian protection systems combine reduction of impact speed by driver warning and/or autonomous braking with deployment of protective devices shortly before the imminent impact. According to the Euro NCAP roadmap the Autonomous Emergency Braking system tests for Pedestrians Protection will be set in force from 2016 onwards. Various projects and organisations in Europe are developing performance tests and assessment procedures as accompanying measures to the Euro NCAP initiative. To provide synthesised input to Euro NCAP so-called Harmonisation Platforms (HP-) have been established. Their main goal is to foster exchange of information on key subjects, thereby generating a clear overview of similarities and differences on the approaches chosen and, on that basis, recommend on future test procedures. In this paper activities of the Harmonisation Platform 2 on the development of Test Equipment are presented. For the testing targets that mimic humans different sensing technologies are required. A first set of specifications for pedestrian targets and the propulsion systems as collected by Harmonisation Platform 2 are presented together with a first evaluation for a number of available tools.
Thoracic injuries are one of the main causes of fatally and severely injured casualties in car crashes. Advances in restraint system technology and airbags may be needed to address this problem; however, the crash test dummies available today for studying these injuries have limitations that prevent them from being able to demonstrate the benefits of such innovations. THORAX-FP7 was a collaborative medium scale project under the European Seventh Framework. It focused on the mitigation and prevention of thoracic injuries through an improved understanding of the thoracic injury mechanisms and the implementation of this understanding in an updated design for the thorax-shoulder complex of the THOR dummy. The updated dummy should enable the design and evaluation of advanced restraint systems for a wide variety (gender, age and size) of car occupants. The hardware development involved five steps: 1) Identification of the dominant thoracic injury types from field data, 2) Specification of biomechanical requirements, 3) Identification of injury parameters and necessary instrumentation, 4) Dummy hardware development and 5) Evaluation of the demonstrator dummy. The activities resulted in the definition of new biofidelity and instrumentation requirements for an updated thorax-shoulder complex. Prototype versions were realised and implemented in three THOR dummies for biomechanical evaluation testing. This paper documents the hardware developments and biomechanical evaluation testing carried out.
Traditionally, traffic count statistics in Germany contain the so-called relevant hourly volume, which is defined as the 30th-highest hour of the year when listing the hourly volumes in descending order. When the first edition of the German Highway Capacity Manual (HBS) was prepared in 2001, the Federal Government decided that this 30th hour should be used as the basis for the level of service determination for all Federal freeways and trunk roads. While German freeways are quite well equipped with inductive loop detectors, there are much fewer counts on rural roads and almost no long-term data on urban roads. With the current redraft of the German HBS detailed advice will be given on how to estimate peak-hour demand (all vehicles and heavy vehicle portion), based on the n-th highest hour concept depending on the available traffic counts. As the HBS will be divided into three major parts: freeways, rural roads, and urban roads, three separate chapters for the peak-hour demand estimation will be provided. Whereas for freeways the task consists in finding the comparable site equipped with inductive loop detectors, for urban roads it is a matter of establishing which time periods of the year and weekdays are appropriate for manual short-term counts as estimation of the 30th hour of the year. For all kind of traffic devices the requirements on traffic demand models for level of service calculations are described.
With the introduction of the German Highway Capacity Manual (HBS) in January 2002 (FGSV, 2002), all methods for the evaluation of the performance of highway facilities were, for the first time in Germany, simultaneously updated and consolidated in a single work following the ideas of the American Highway Capacity Manual (HCM). This paper gives an overview of the new 2015 edition of the German HBS and describes the changes as for example the addition of chapters for freeway, rural roads, and major urban street facilities, comprising segments and intersections.
In this study, we compared the injury severity of occupants according to the seating position and the crashing direction in motor vehicle accidents. In the driver's point of view, it was separated the seating position as "Near-side" and "Far-side". The study subjects were targeted by people who visited 4 regional emergency centers following motor vehicle accidents. Real-world investigation was performed by direct and indirect methods after patient- consent. The information of the damaged vehicle was informed by Collision Deformation Classification (CDC) code and the information of the injury of patients was informed by using the Abbreviated Injury Score (AIS) and Injury Severity Score (ISS). When the column 3 in CDC code was P, damaged at the middle part of lateral side, the average point of AIS 3 was 1.91-±1.72 in near-side and 1.02-±1.31 in far-side (p<0.01). The average point of maximum AIS (MAIS) was 2.78-±1.39 in near-side and 2.02-±1.11 in far-side (p<0.01). The average point of ISS was 15.74-±14.71 in near-side and 8.11-±8.39 in far-side (p<0.01). Also, when the column 3 in CDC code was D, damaged at the whole part of lateral side, it was significant that the average point of AIS 3 and MAIS in near-side was bigger than in far-side (p=0.02).
The off-set assessment procedure potentially contributes to the FIMCAR objectives to maintain the compartment strength and to assess load spreading in frontal collisions. Furthermore it provides the opportunity to assess the restraint system performance with different pulses if combined with a full-width assessment procedure in the frontal assessment approach. Originally it was expected that the PDB assessment procedure would be selected for the FIMCAR assessment approach. However, it was not possible to deliver a compatibility metric in time so that the current off-set procedure (ODB as used in UNECE R94) with some minor modifications was proposed for the FIMCAR Assessment Approach. Nevertheless the potential to assess load spreading, which appears not to be possible with any other assessed frontal impact assessment procedure was considered to be still high. Therefore the development work for the PDB assessment procedure did not stop with the decision not to select the PDB procedure. As a result of the decisions to use the current ODB and to further develop the PDB procedure, both are covered within this deliverable. The deliverable describes the off-set test procedure that will be recommended by FIMCAR consortium, this corresponds to the ODB test as it is specified in UN-ECE Regulation 94 (R94), i.e. EEVC deformable element with 40% overlap at a test speed of 56 km/h. In addition to the current R94 requirements, FIMCAR will recommend to introduce some structural requirements which will guarantee sufficiently strong occupant compartments by enforcing the stability of the forward occupant cell. With respect to the PDB assessment procedure a new metric, Digital Derivative in Y direction - DDY, was developed, described, analysed, and compared with other metrics. The DDY metric analyses the deformation gradients laterally across the PDB face. The more even the deformation, the lower the DDY values and the better the metric- result. In order analyse the different metrics, analysis of the existing PDB test results and the results of the performed simulation studies was performed. In addition, an assessment of artificial deformation profiles with the metrics took place. This analysis shows that there are still issues with the DDY metric but it appears that it is possible to solve them with future optimisations. For example the current metric assesses only the area within 60% of the half vehicle width. For vehicles that have the longitudinals further outboard, the metric is not effective. In addition to the metric development, practical issues of the PDB tests such as the definition of a scan procedure for the analysis of the deformation pattern including the validation of the scanning procedure by the analysis of 3 different scans at different locations of the same barrier were addressed. Furthermore the repeatability and reproducibility of the PDB was analysed. The barrier deformation readings seem to be sensitive with respect to the impact accuracy. In total, the deliverable is meant to define the FIMCAR off-set assessment procedure and to be a starting point for further development of the PDB assessment procedure.
Evaluation of the performance of competitive headforms as test tools for interior headform testing
(2009)
The European Research Project APROSYS has evaluated the interior headform test procedure developed by EEVC WG 13, representing the head contact in the car during a lateral impact. One important aspect within this test procedure was the selection of an appropriate impactor. The WG13 procedure currently uses the Free Motion Headform as used within the FMVSS 201. The ACEA 3.5 kg headform used in Phase 1 of the European Directive and the future European Regulation on Pedestrian Protection is still discussed as a possible alternative. This paper reports work performed by the Federal Highway Research Institute (BASt) as a part of the APROSYS Task 1.1.3. The study compares the two headform impactors according to FMVSS and ACEA, in a series of basic tests in order to evaluate their sensitivity towards different impact angles, impact accuracy, the effect of differences to impactors of the same type and the effects of the repeatability and reproducibility of the test results. The test surface consisted of a steel tube covered with PU foam and PVC, representing the car interior to be tested. Despite of the higher mass of the FMH the HIC values of this impactor were generally lower than those of the ACEA headform. The FMH showed a higher repeatability of test results but a high sensitivity on the angle of roll, the spherical ACEA impactor performed better with regards to the reproducibility. In case of the ACEA impactor-, the angle of roll had no influence.
The European Enhanced Vehicle-safety Committee (EEVC) Working Group 13 for Side Impact Protection has been developing an Interior Headform Test Procedure to complement the full-scale Side Impact Test Procedure for Europe and for the proposed IHRA test procedures. In real world accidents interior head contacts with severe head injuries still occur, which are not always observed in standard side impact tests with dummies. Thus a means is needed to encourage further progress in head protection. At the 2003 ESV-Conference EEVC Working Group 13 reported the results on Interior Headform Testing. Further research has been performed since and the test procedure has been improved. This paper gives an overview of its latest status. The paper presents new aspects which are included in the latest test procedure and the research work leading to these enhancements. One topic of improvement is the definition of the Free Motion Headform (FMH) impactor alignment procedure to provide guidelines to minimize excessive headform chin contact and to minimize potential variability. Research activities have also been carried out on the definition of reasonable approach head angles to avoid unrealistic test conditions. Further considerations have been given to the evaluation of head airbags, their potential benefits and a means of ensuring protection for occupants regardless of seating position and sitting height. The paper presents the research activities that have been made since the last ESV Conference in 2003 and the final proposal of the EEVC Headform Test Procedure.
Side impacts, both nearside and farside, have been indicated by research to be responsible for a large proportion of serious injuries from road crashes. This study aimed to compare and contrast the characteristics of nearside and farside crashes in Australia, Germany and the U.S., using the ANCIS, GIDAS and NASS/CDS in-depth-databases, in order to establish the impact and injury severity associated with these crashes, and the types of injuries sustained. The analyses revealed some interesting similarities, as well as differences, between both nearside and farside crashes, and the emergent trends between the three investigated countries. More specifically, it was indicated that whilst the severity of injury sustained in nearside crashes was slightly greater overall than that found for farside crashes, careful consideration of struck and nonstruck side occupants must be made when considering aspects such as vehicle design and occupant protection.
A change emerges in hospital landscape due to health political measures, which in consequence also influences the pre-clinical medical care of emergencies. The main focus of this study was to gather information about emergency medical care after traffic accidents on the basis of data of Bavarian emergency medical services. In Bavaria, in 2006 it was necessary to call an emergency doctor in the case of 14.261 traffic accidents. Predominantly the patients were provided by land-based life saving appliances, air rescue services were only applied in 19.1 % of the cases. 47.6 % of patients being involved in a traffic accident were transported into a primary health care hospital. A prehospital interval of more than 60 minutes was calculated in 20 % of emergency care. 96.2 % of the patients were transported to hospitals of tertiary or maximum supply by air rescue services. The life saving appliances" readiness for action is however restricted to daylight. A further limitation appeared for routine office hours in hospitals: Only 36.7 % of accidents occurred in this time frame. An increase of hospitalizations in clinics of maximum supply appeared from 2002 until 2006 while simultaneously the prehospital period was extended. To assure a sufficient medical care of seriously injured persons further on, a fulltime and area-wide expostulation of efficient facilities is necessary. For this purpose it is necessary to establish regional trauma networks as well as emergency medical service at night time. Beyond that, a cost efficient compensation of the structural, personnel and logistic expenses has to be assured.
The project UR:BAN "Cognitive assistance (KA)" aims at developing future assistance systems providing improved performance in complex city traffic. New state-of-the-art panoramic sensor technologies now allow comprehensive monitoring and evaluation of the vehicle environment. In order to improve protection of vulnerable road users such as pedestrians and cyclists, a particular objective of UR:BAN is the evaluation and prediction of their behaviour and actions. The objective of subproject "WER" is development support by providing quantitative estimates of traffic collisions at the very start and predict potential in terms of optimized accident avoidance and reduction of injury severity. For this purpose an integrated computer simulation toolkit is being devised based on real world accidents (GIDAS as well as video documented accidents), allowing the prediction of potential effectiveness and future benefit of assistance systems in this accident scenario. Subsequently, this toolkit may be used for optimizing the design of implemented assistance systems for improved effectiveness.
Safety of light goods vehicles - findings from the German joint project of BASt, DEKRA, UDV and VDA
(2011)
Light goods vehicles (LGVs) are an important part of the vehicle fleet, providing a vital component in the European transportation system. On the other hand, LGVs are in the focus of public discussion regarding road safety. In order to analyse the accident situation of LGVs in an objective manner, Federal Highway Research Institute (BASt), VDA, DEKRA and German Insurers Accident Research (UDV) launched a joint project. The aim of this project, which will be finished by mid of 2011, is to identify reasonable measures which will further improve the safety of LGVs. For the first time, these partners jointly together conducted a research project and put together their know-how in accident research. Analyses are based on real-life accident data from the GIDAS database, the Accident Database of UDV (UDB), the DEKRA database and national statistics. The findings deliver answers to questions within the arena of future legislative actions and consumer protection activities. The analyses of databases cover areas of primary and secondary safety of LGVs with a special focus on advanced driver assistance systems (ADAS), driver behaviour as well as partner and occupant protection. Key figures from national statistics are used to highlight hotspots of accidents of LGVs in Germany. Finally, the proposed countermeasures are assessed regarding their potential effectiveness. Amongst others, the results show that the accident situation of LGVs is very similar to that of passenger cars. Noteworthy variations could be found in collisions with pedestrians, at reversing and regarding accident causes. Occupant safety of LGVs is on a higher level compared to cars. Results indicate that seatbelt use is on a significantly lower level compared to cars. This leads to higher-than-average injury risk for unbelted LGV occupants. When it comes to partner protection, there are problems with compatibility at LGVs. For car occupants there is a very high injury risk when colliding with a LGV. It indicates that higher passive safety test standards for LGVs would be counterproductive if they further increase stiffness of LGVs. The analysis of LGV-pedestrian accidents shows that pedestrian kinematic differs significantly from car-pedestrian accidents. At this point, existing pedestrian related test standards developed for cars cannot be adopted to LGVs. When it comes to active safety, ESC proved its effectiveness once again. Beyond that, rear view cameras, advanced emergency braking systems and lane departure warning systems show a safety potential, too. In addition to any technical countermeasures previously discussed, the importance of the driver behavior and attitude regarding the accident risk was investigated. In order to develop successful actions it is important to understand the main target population. In the case of LGV especially the crafts business and smaller companies are the major contributors the safety issue.
The paper describes the development of transitions between different safety barriers in Germany but also in the context of the European standardization. In the paper practical and impact test expriences with transitions are shown. In view of the sheer number of theoretically possible combinations of safety barriers, the demand for testing every transition, even if the connecting safety barriers differ only slightly, appears to be economically unacceptable. On the other hand the experience from accidents and also from failed impact tests shows that transitions can be a risk to traffic safety. Therefore criteria for the distinction between transitions (impact test required/impact test unnecessary) are explained. In order to distinguish transitions which do not have to be impact-tested from those that require impact tests, criteria were developed and formulated.
In recent years special attention has been paid to reducing the number of fatalities resulting from road traffic accidents. The ambitious target to cut in half the number of road users who are killed each year by 2010 compared with the 2001 figures, as set out in the European White Paper "European Transport Policy for 2010: Time to Decide" implies a general approach covering all kinds of road users. Much has been achieved, e.g. in relation to the safety of car passengers and pedestrians but PTW accidents still represent a significant proportion of fatal road accidents. More than 6,000 motorcyclists die annually on European roads which amounts to 16% of the EU-15 road fatalities. The European Commission therefore launched in 2004 a Sub- Project dealing with motorcycle accidents within an Integrated Project called APROSYS (Advanced PROtection SYStems) forming part of the 6th Framework Programme. In a first step, the combined national statistical data collections of Germany, Italy, the Netherlands and Spain were analysed. Amongst other things parameters like accident location, road conditions, road alignment and injury severity have been explored. The main focus of the analysis was on serious and fatal motorcycle accidents and the results showed similar trends in all four countries. From these results 7 accident scenarios were selected for further investigation via such in-depth databases as the DEKRA database, the GIDAS 2002 database, the COST 327 database and the Dutch element of the MAIDS database. Three tasks, namely the study of PTW collisions with passenger cars, PTW accidents involving road infrastructure features, and motorcyclist protective devices have been assessed and these will concentrate inter alia on accident causes, rider kinematics and injury patterns. A detailed literature review together with the findings of the in-depths database analysis is presented in the paper. Conclusions are drawn and the further stages of the project are highlighted.
Topics of this report are: Securing mobility and making mobility sustainable - Strategies for road safety: Safe behavior, Safe vehicles, Safe infrastructure, Telematics, International vehicle-engineering measures " Accident statistics " Accident research " Passive vehicle safety " Active vehicle safety " Driver assistance systems " Environmental protection through vehicle engineering.
The field of safety in road tunnels has always been an important issue for operators, owners and the responsible authorities. After the tunnel accidents in 1999 the subject gained however in importance. On European level the Directive 2004/54 EC on "Minimum safety requirements for tunnels in the Trans European Road network" has been published. This guideline has to be implemented into national law by all Member States. According to the guideline all Member States of the European Community shall develop a methodology for risk analyses to be applied in certain cases. For Germany, a standardized methodology for a probabilistic quantitative risk assessment has been worked out.
The purpose of this paper is to review injuries found in real world lateral collisions and determine the mechanisms responsible for certain kinds of biomechanical failure. During the last years the distribution of deaths among the different types of accidents has changed. Lateral collisions now are the most frequent cause of fatal and other serious injuries. Every third accident is an impact from the side, while every second fatality is the result of a lateral accident. Just a few years ago this value was no higher than 30%. This is probably the result of increasing safety standards for frontal collisions (airbags, seatbelt usage, structural improvements of cars, etc.). Although the number of registered vehicles increased, the total amount of fatalities decreased during the same period. Thus it is now necessary to pay greater attention to the lateral accident situation in order to improve road safety and decrease the number of traffic injuries. Several European organisations had decided to launch the project SID2000, which was funded by the European Commission, with the intention of gathering more knowledge on injuries occurring in lateral accidents and the mechanisms that lead to such injuries. This should enable the group to define the requirements for a new side impact dummy (SID) to be designed. Within the same project the existing TNO-EUROSID 1 was enhanced by another group and the experience gained has now enabled allowed to design a better measuring device for side impacts. The data used for this contribution came from sources from all over Europe and had to be gathered in such a manner that as many accident parameters as possible were taken into account.
In the paper it is investigated to what extend one can extrapolate the detailed accident database GIDAS (German In-Depth Accident Study), with survey area Hanover and Dresden region, to accident behavior in other regions and countries within Europe and how such an extrapolation can be implemented and evaluated. Moreover, it is explored what extent of accident data for the target country is necessary for such an extrapolation and what can be done in situations with sparse and low accident information in a target region. It will be shown that a direct transfer of GIDAS injury outcomes to other regions does not lead to satisfactory results. But based on GIDAS and using statistical decision tree methods, an extrapolation methodology will be presented which allows for an adequate prediction of the distribution of injury severity in severe traffic accidents for European countries. The method consists essentially of a separation of accidents into well-described subgroups of accidents within which the accident severity distribution does not vary much over different regions. In contrast the distribution over the various subgroups of accidents typically is rather different between GIDAS and the target. For the separation into the subgroups meaningful accident parameters (like accident type, traffic environment, type of road etc.) have been selected. The developed methodology is applied to GIDAS data for the years 1999-2012 and is evaluated with police accident data for Sweden (2002 to 2012) and the United Kingdom (2004 to 2010). It is obtained that the extrapolation proposal has good to very good predictive power in the category of severe traffic accidents. Moreover, it is shown that iterative proportional fitting enables the developed extrapolation method to lead to a satisfactory extrapolation of accident outcomes even to target regions with sparse accident information. As an important potential application of the developed methodology the a priori extrapolation of effects of (future) safety systems, the operation of which can only be well assessed on the basis of very detailed GIDAS accident data, is presented. Based on the evaluation of the presented extrapolation method it will be shown that GIDAS very well represents severe accidents, i.e. accidents with at least one severely or fatally injured person involved, for other countries in Europe. The developed extrapolation method reaches its limits in cases for which only very little accident information is available for the target region.