91 Fahrzeugkonstruktion
Filtern
Erscheinungsjahr
Dokumenttyp
- Konferenzveröffentlichung (164)
- Buch (Monographie) (111)
- Wissenschaftlicher Artikel (18)
- Arbeitspapier (13)
- Teil eines Buches (Kapitel) (8)
- Bericht (5)
Schlagworte
- Deutschland (138)
- Germany (138)
- Safety (124)
- Sicherheit (123)
- Conference (101)
- Konferenz (98)
- Fahrzeug (89)
- Vehicle (88)
- Research report (77)
- Forschungsbericht (75)
A flexible pedestrian legform impactor (FlexPLI) has been evaluated by a Technical Evaluation Group (Flex-TEG) of the Working Party on Passive Safety (GRSP) of the United Nations Economic Commission for Europe (UN-ECE). It will be implemented within phase 2 of the global technical regulation (GTR 9) as well as within a new ECE regulation on pedestrian safety as a test tool for the assessment of lower extremity injuries in lateral vehicle-to-pedestrian accidents (UN-ECE 2010-1, 2010-2 and 2010-3). Due to its biofidelic properties in the knee and tibia section, the FlexPLI is found to having an improved knee and tibia injury assessment ability when being compared to the current legislative test tool, the lower legform impactor developed by the Pedestrian Safety Working Group of the European Enhanced Vehicle-safety Committee (EEVC WG 17). However, due to a lack of biofidelity in terms of kinematics and loadings in the femur part of the FlexPLI, an appropriate assessment of femur injuries is still outstanding. The study described in this paper is aimed to close this gap. Impactor tests with the FlexPLI at different impact heights on three vehicle frontends with Sedan, SUV and FFV shape are performed and compared to tests with a modified FlexPLI with upper body mass. Full scale validation tests using a modified crash test dummy with attached FlexPLI that are carried out for the first time prove the more humanlike responses of the femur section with applied upper body mass. Apart from that they also show that the impact conditions described in the current technical provisions for tests with the FlexPLI don"t necessarily compensate the missing torso mass in terms of knee and tibia loadings either. Therefore it can be concluded that an applied upper body mass will contribute to a more biofidelic overall behavior of the legform and subsequently an improved injury assessment ability of all lower extremity injuries addressed by the FlexPLI. Nevertheless, the validity of the original as well as the modified legform for tests against vehicles with extraordinary high bumpers as well as flat front vehicles still needs to be evaluated in detail. A first clue is given by the application of an additional accelerometer to the legform.
Thoracic injury is one of the predominant types of severe injuries in frontal accidents. The assessment of the injury risk to the thorax in the current frontal impact test procedures is based on the uni-axial chest deflection measured in the dummy Hybrid III. Several studies have shown that criteria based on the linear chest potentiometer are not sensitive enough to distinguish between different restraint systems, and cannot indicate asymmetric chest loading, which has been shown to correlate to increased injury risk. Furthermore, the measurement is sensitive to belt position on the dummy chest. The objective of this study was to evaluate the optical multipoint chest deflection measurement system "RibEye" in frontal impact sled tests. Therefore the sensitivity of the RibEyesystem to different restraint system parameters was investigated. Furthermore, the issue of signal drop out at the 6 th rib was investigated in this study.A series of sled tests were conducted with the RibEye system in the Hybrid III 50%. The sled environment consisted of a rigid seat and a standard production three-point seat belt system. Rib deflections were recorded with the RibEye system and additionally with the standard chest potentiometer. The tests were carried out at crash pulses of two different velocities (30 km/h and 64 km/h). The tests were conducted with different belt routing to investigate the sensitivity of chest deflection measurements to belt position on the dummy chest. Furthermore, different restraint system parameters were investigated (force limiter level, with or without pretensioning) to evaluate if the RibEye measurements provide additional information to distinguish between restraint system configurations . The results showed that with the RibEye system it was possible to identify the effect of belt routing in more detail. The chest deflections measured with the standard chest potentiometer as well as the maximum deflection measured by RibEye allowed the distinction to be made between different force limiter levels. The RibEye system was also able to clearly show the asymmetric deflection of the rib cage due to belt loading. In some configurations, differences of more than 15 mm were observed between the left and side areas of the chest. Furthermore, the abdomen insert was identified as source of the problem of signal drop out at the 6th rib. Possible solutions are discussed. In conclusion, the RibEye system provided valuable additional information regarding the assessment of restraint systems. It has the potential to enable the evaluation of thoracic injury risk due to asymmetric loading. Further investigations with the RibEye should be extended to tests in a vehicle environment, which include a vehicle seat and other restraint system components such as an airbag.
Safety of light goods vehicles - findings from the German joint project of BASt, DEKRA, UDV and VDA
(2011)
Light goods vehicles (LGVs) are an important part of the vehicle fleet, providing a vital component in the European transportation system. On the other hand, LGVs are in the focus of public discussion regarding road safety. In order to analyse the accident situation of LGVs in an objective manner, Federal Highway Research Institute (BASt), VDA, DEKRA and German Insurers Accident Research (UDV) launched a joint project. The aim of this project, which will be finished by mid of 2011, is to identify reasonable measures which will further improve the safety of LGVs. For the first time, these partners jointly together conducted a research project and put together their know-how in accident research. Analyses are based on real-life accident data from the GIDAS database, the Accident Database of UDV (UDB), the DEKRA database and national statistics. The findings deliver answers to questions within the arena of future legislative actions and consumer protection activities. The analyses of databases cover areas of primary and secondary safety of LGVs with a special focus on advanced driver assistance systems (ADAS), driver behaviour as well as partner and occupant protection. Key figures from national statistics are used to highlight hotspots of accidents of LGVs in Germany. Finally, the proposed countermeasures are assessed regarding their potential effectiveness. Amongst others, the results show that the accident situation of LGVs is very similar to that of passenger cars. Noteworthy variations could be found in collisions with pedestrians, at reversing and regarding accident causes. Occupant safety of LGVs is on a higher level compared to cars. Results indicate that seatbelt use is on a significantly lower level compared to cars. This leads to higher-than-average injury risk for unbelted LGV occupants. When it comes to partner protection, there are problems with compatibility at LGVs. For car occupants there is a very high injury risk when colliding with a LGV. It indicates that higher passive safety test standards for LGVs would be counterproductive if they further increase stiffness of LGVs. The analysis of LGV-pedestrian accidents shows that pedestrian kinematic differs significantly from car-pedestrian accidents. At this point, existing pedestrian related test standards developed for cars cannot be adopted to LGVs. When it comes to active safety, ESC proved its effectiveness once again. Beyond that, rear view cameras, advanced emergency braking systems and lane departure warning systems show a safety potential, too. In addition to any technical countermeasures previously discussed, the importance of the driver behavior and attitude regarding the accident risk was investigated. In order to develop successful actions it is important to understand the main target population. In the case of LGV especially the crafts business and smaller companies are the major contributors the safety issue.
It is well known that most accidents with pedestrians are caused by the driver not being alert or misinterpreting the situation. For that reason advanced forward looking safety systems have a high potential to improve safety for this group of vulnerable road users. Active pedestrian protection systems combine reduction of impact speed by driver warning and/or autonomous braking with deployment of protective devices shortly before the imminent impact. According to the Euro NCAP roadmap the Autonomous Emergency Braking system tests for Pedestrians Protection will be set in force from 2016 onwards. Various projects and organisations in Europe are developing performance tests and assessment procedures as accompanying measures to the Euro NCAP initiative. To provide synthesised input to Euro NCAP so-called Harmonisation Platforms (HP-) have been established. Their main goal is to foster exchange of information on key subjects, thereby generating a clear overview of similarities and differences on the approaches chosen and, on that basis, recommend on future test procedures. In this paper activities of the Harmonisation Platform 2 on the development of Test Equipment are presented. For the testing targets that mimic humans different sensing technologies are required. A first set of specifications for pedestrian targets and the propulsion systems as collected by Harmonisation Platform 2 are presented together with a first evaluation for a number of available tools.
For a number of EU regulatory acts Virtual Testing (VT) is already allowed for type approval (see Commission Regulation No. 371/2010 of 16 April 2010 amending the Framework Directive 2007/46/EC). However, only a very general procedure on how to apply VT for type approval is provided. Technical details for specific regulatory acts are not given yet. The main objective of the European project IMVITER (IMplementation of VIrtual TEsting in Safety Regulations) was to promote the implementation of VT in safety regulations. When proposing VT procedures the new regulation was taken into account, in particular, addressing open issues. Special attention was paid to pedestrian protection as pilot cases. A key aspect for VT implementation is to demonstrate that the employed simulation models are reliable. This paper describes how the Verification and Validation (V&V) method defined by the American Society of Mechanical Engineers was adapted for pedestrian protection VT based assessment. or the certification of headform impactors an extensive study was performed at two laboratories to assess the variability in calibration tests and equivalent results from a set of simulation models. Based on these results a methodology is defined for certification of headform impactor simulation models. A similar study was also performed with one vehicle in the type approval test setup. Its bonnet was highly instrumented and subjected to 45 impacts in five different positions at two laboratories in order to obtain an estimation of the variability in the physical tests. An equivalent study was performed using stochastic simulation with a metamodel fed with observed variability in impact conditions of physical headforms. An estimation of the test method uncertainty was obtained and used in the definition of a validation corridor for simulation models. Validation metric and criteria were defined in cooperation with the ISO TC22 SC10 and SC12 WG4 "Virtual Testing". A complete validation procedure including different test setups, physical magnitudes and evaluation criteria is provided. A detailed procedural flowchart is developed for VT implementation in EC Regulation No 78/2009 based on a so called "Hybrid VT" approach, which combines real hardware based head impact tests and simulations. This detailed flowchart is shown and explained within this paper. Another important point within the virtual testing based procedures is the documentation of relevant information resulting from the verification and validation process of the numerical models used. For this purpose report templates were developed within the project. The proposed procedure fixes minimum V&V requirements for numerical models to be confidently used within the type-approval process. It is not intended to be a thorough guide on how to build such reliable models. Different modeling methodologies are therefore possible, according to particular OEM know-how. These requirements respond to a balance amongst the type-approval stakeholders interests. A cost-benefit analysis, which was also performed within the IMVITER project, supports this approach, showing the conditions in which VT implementation is beneficial. Based on the experience gained in the project and the background of the experts involved an outlook is given as a roadmap of VT implementation, identifying the most important milestones to be reached along the way to a future vehicle type approval procedure supported by VT. The results presented in this paper show an important step addressing open questions and fostering the future acceptance of virtual testing in pedestrian protection type approval procedures.
Aktive Systeme der passiven Fahrzeugsicherheit zum Fußgängerschutz, sogenannte crash-aktive Fußgängerschutzsysteme, werden seit 2005 zur Erfüllung der gesetzlichen Anforderungen (siehe Verordnung (EG) Nr. 78/2009 und 631/2009) in Serienfahrzeugen eingesetzt. Diese crash-aktiven Fußgängerschutzsysteme stellen im Gegensatz zu den rein passiven Systemen nur eine instationäre Lösung dar. Da die innerhalb der gesetzlichen Anforderungen definierten Testverfahren zur Bewertung stationärer Systeme entwickelt wurden, können derzeit mögliche Risiken instationärer Systeme nicht berücksichtigt werden. Im Rahmen dieses Forschungsprojektes soll ein Bewertungsverfahren für diese crash-aktiven Fußgängerschutzsysteme entwickelt werden, welches das reale Potential dieser Systeme möglichst gut wiedergibt. Basis hierfür soll eine umfangreiche Untersuchung zusätzlicher Risiken bilden. Die hier untersuchten instationären Schutzmaßnahmen werden nur im Falle eines Fahrzeuganpralls gegen Fußgänger aktiviert, der daher zuverlässig erkannt werden muss. Für die hierfür eingesetzten, kontaktbasierten Sensorsysteme stellen Fußgänger mit geringen Lasteinträgen in die Fahrzeugfront eine große Herausforderung dar. Die Lasteinträge hängen von zahlreichen Faktoren, wie bspw. der Höhe der entsprechenden Krafteinleitungspfade sowie der Größe und dem Gewichts des Fußgängers, ab. Mit Hilfe von umfangreichen Anprallversuchen und -simulationen wird gezeigt, dass die bisher eingesetzten Prüfkörper nur zum Teil für die Erfüllung dieser Anforderungen geeignet sind. Für ein geeignetes Prüfverfahren müssen daher neue Prüfkörper entwickelt werden. Durch die Aktivierung der Schutzmaßnahme soll bei den crash-aktiven Systemen vor allem das Verletzungsrisiko beim Kopfanprall verringert werden. Hierfür wird häufig die hintere Motorhaubenkante angehoben, um zusätzlichen Deformationsfreiraum zur Verfügung zu stellen. Die Haubenanhebung kann jedoch auch in zusätzlichen Verletzungsrisiken resultieren, bspw. durch die exponierte hintere Haubenkante oder die Verringerung des Deformationsfreiraums in Folge des Oberkörperanpralls. Ein Ersatzprüfverfahren zur Bewertung der Haubendeformation mit Hilfe des Hüftimpaktors wird vorgestellt. Ein hybrides Testverfahren bestehend aus Simulation und Versuch eignet sich für eine objektive Bewertung dieser Systeme, wobei die entsprechenden Versuchsparameter mit Hilfe der vorherigen Simulation bestimmt werden können.
The objectives of the FIMCAR (Frontal Impact and Compatibility Assessment Research) project are to answer the remaining open questions identified in earlier projects (such as understanding of the advantages and disadvantages of force based metrics and barrier deformation based metrics, confirmation of specific compatibility issues such as structural interaction, investigation of force matching) and to finalise the frontal impact test procedures required to assess compatibility. Research strategies and priorities were based on earlier research programs and the FIMCAR accident data analysis. The identified real world safety issues were used to develop a list of compatibility characteristics which were then prioritised within the consortium. This list was the basis for evaluating the different test candidates. This analysis resulted in the combination of the Full Width Deformable Barrier test (FWDB) with compatibility metrics and the existing Offset Deformable Barrier (ODB) as described in UN-ECE Regulation 94 with additional cabin integrity requirement as being proposed as the FIMCAR assessment approach. The proposed frontal impact assessment approach addresses many of the issues identified by the FIMCAR consortium but not all frontal impact and compatibility issues could be addressed.
For the assessment of vehicle safety in frontal collisions compatibility (which consists of self and partner protection) between opponents is crucial. Although compatibility has been analysed worldwide for over 10 years, no final assessment approach has been defined to date. Taking into account the European Enhanced Vehicle safety Committee (EEVC) compatibility and the final report to the steering committee on frontal impact [Faerber 2007] and the FP5 VC-COMPAT[Edwards 2007] project activities, two test approaches were identified as the most promising candidates for the assessment of compatibility. Both are composed of an off-set and a full overlap test procedure. In addition another procedure (a test with a moving deformable barrier) is getting more attention in current research programmes. The overall objective of the FIMCAR project is to complete the development of the candidate test procedures and propose a set of test procedures suitable for regulatory application to assess and control a vehicle- frontal impact and compatibility crash safety. In addition an associated cost benefit analysis will be performed. In the FIMCAR Deliverable D 3.1 [Adolph 2013] the development and assessment of criteria and associated performance limits for the full width test procedure were reported. In this Deliverable D3.2 analyses of the test data (full width tests, car-to-car tests and component tests), further development and validation of the full width assessment protocol and development of the load cell and load cell wall specification are reported. The FIMCAR full-width assessment procedure consists of a 50 km/h test against the Full Width Deformable Barrier (FWDB). The Load Cell Wall behind the deformable element assesses whether or not important Energy Absorbing Structures are within the Common Interaction Zone as defined based on the US part 581 zone. The metric evaluates the row forces and requires that the forces directly above and below the centre line of the Common Interaction Zone exceed a minimum threshold. Analysis of the load spreading showed that metrics that rely on sum forces of rows and columns are within acceptable tolerances. Furthermore it was concluded that the Repeatability and Reproducibility of the FWDB test is acceptable. The FWDB test was shown to be capable to detect lower load paths that are beneficial in car-to-car impacts.
For the assessment of vehicle safety in frontal collisions compatibility (which consists of self and partner protection) between opponents is crucial. Although compatibility has been analysed worldwide for over 10 years, no final assessment approach has been defined to date. Taking into account the European Enhanced Vehicle safety Committee (EEVC) compatibility and frontal impact working group (WG15) and the FP5 VC-COMPAT project activities, two test approaches have been identified as the most promising candidates for the assessment of compatibility. Both are composed of an off-set and a full overlap test procedure. In addition another procedure (a test with a moving deformable barrier) is getting more attention in current research programmes. The overall objective of the FIMCAR project is to complete the development of the candidate test procedures and propose a set of test procedures suitable for regulatory application to assess and control a vehicle- frontal impact and compatibility crash safety. In addition an associated cost benefit analysis should be performed. The objectives of the work reported in this deliverable were to review existing full-width test procedures and their discussed compatibility metrics, to report recent activities and findings with respect to full-width assessment procedures and to assess test procedures and metrics. Starting with a review of previous work, candidate metrics and associated performance limits to assess a vehicle- structural interaction potential, in particular its structural alignment, have been developed for both the Full Width Deformable Barrier (FWDB) and Full Width Rigid Barrier (FWRB) tests. Initial work was performed to develop a concept to assess a vehicle- frontal force matching. However, based on the accident analyses performed within FIMCAR frontal force matching was not evaluated as a first priority and thus in line with FIMCAR strategy the focus was put on the development of metrics for the assessment of structural interaction which was evaluated as a first priority.
Cost benefit analysis
(2014)
Although the number of road accident casualties in Europe is falling the problem still remains substantial. In 2011 there were still over 30,000 road accident fatalities [EC 2012]. Approximately half of these were car occupants and about 60 percent of these occurred in frontal impacts. The next stage to improve a car- safety performance in frontal impacts is to improve its compatibility for car-to-car impacts and for collisions against objects and HGVs. Compatibility consists of improving both a car- self and partner protection in a manner such that there is good interaction with the collision partner and the impact energy is absorbed in the car- frontal structures in a controlled way which results in a reduction of injuries. Over the last ten years much research has been performed which has found that there are four main factors related to a car- compatibility [Edwards 2003, Edwards 2007]. These are structural interaction potential, frontal force matching, compartment strength and the compartment deceleration pulse and related restraint system performance. The objective of the FIMCAR FP7 EC-project was to develop an assessment approach suitable for regulatory application to control a car- frontal impact and compatibility crash performance and perform an associated cost benefit analysis for its implementation.
The objective of this deliverable is to describe the expected influence of the candidate test procedures developed in FIMCAR for frontal impact on other impact types. The other impact types of primary interest are front-to-side impacts, collisions with road restraint systems (e.g. guardrails), and heavy goods vehicle impacts. These collision types were chosen as they involve structures that can be adapted to improve safety. Collisions with vulnerable road users (VRU) were not explicitly investigated in FIMCAR. It is expected that the vehicle structures of interest in FIMCAR can be designed into a VRU friendly shell. Information used for this deliverable comes from simulations and car-to-car crash tests conducted in FIMCAR or review of previous research. Three test configurations (full width, offset, and moving deformable barriers) were the input to the FIMCAR selection process. There are three different types of offset tests and two different full width tests. During the project test procedures could be divided into three groups that provide different influences or outcomes on vehicle designs: 1. The ODB barrier provides a method to assess part of the vehicles energy absorption capabilities and compartment test in one test. 2. The FWRB and FWDB have similar capabilities to control structural alignment, further assess energy absorption capabilities, and promote the improvements in the occupant restraint system for high deceleration impacts. 3. The PDB and MPDB can be used to promote better load spreading in the vehicle structures, in addition to assessing energy absorption and occupant compartment strength in an offset configuration. The consortium selected the ODB and FWDB as the two best candidates for short term application in international rulemaking. The review of how all candidates would affect vehicle performance in other impacts (beside front-to-front vehicle or frontal impacts with fixed obstacles) however is reported in this deliverable to support the benefit analysis reported in FIMCAR. The grouping presented above is used to discuss all five test candidates using similarities between certain tests and thereby simplify the discussion.
Accident analysis
(2014)
For the assessment of vehicle safety in frontal collisions compatibility (which consists of self and partner protection) between opponents is crucial. Although compatibility has been analysed worldwide for years, no final assessment approach has been defined to date. Taking into account the European Enhanced Vehicle safety Committee (EEVC) compatibility and frontal impact working group (WG15) and the EC funded FP5 VC-COMPAT project activities, two test approaches have been identified as the most promising candidates for the assessment of compatibility. Both are composed of an off-set and a full overlap test procedure. In addition another procedure (a test with a moving deformable barrier) is getting more attention in today- research programmes. The overall objective of the FIMCAR project is to complete the development of the candidate test procedures and propose a set of test procedures suitable for regulatory application to assess and control a vehicle- frontal impact and compatibility crash safety. In addition an associated cost benefit analysis should be performed. The specific objectives of the work reported in this deliverable were: - Determine if previously identified compatibility issues are still relevant in current vehicle fleet: Structural interaction, Frontal force matching, Compartment strength in particular for light cars. - Determine nature of injuries and injury mechanisms: Body regions injured o Injury mechanism: Contact with intrusion, Contact, Deceleration / restraint induced. The main data sources for this report were the CCIS and Stats 19 databases from Great Britain and the GIDAS database from Germany. The different sampling and reporting schemes for the detailed databases (CCIS & GIDAS) sometimes do not allow for direct comparisons of the results. However the databases are complementary " CCIS captures more severe collisions highlighting structure and injury issues while GIDAS provides detailed data for a broader range of crash severities. The following results represent the critical points for further development of test procedures in FIMCAR.
The off-set assessment procedure potentially contributes to the FIMCAR objectives to maintain the compartment strength and to assess load spreading in frontal collisions. Furthermore it provides the opportunity to assess the restraint system performance with different pulses if combined with a full-width assessment procedure in the frontal assessment approach. Originally it was expected that the PDB assessment procedure would be selected for the FIMCAR assessment approach. However, it was not possible to deliver a compatibility metric in time so that the current off-set procedure (ODB as used in UNECE R94) with some minor modifications was proposed for the FIMCAR Assessment Approach. Nevertheless the potential to assess load spreading, which appears not to be possible with any other assessed frontal impact assessment procedure was considered to be still high. Therefore the development work for the PDB assessment procedure did not stop with the decision not to select the PDB procedure. As a result of the decisions to use the current ODB and to further develop the PDB procedure, both are covered within this deliverable. The deliverable describes the off-set test procedure that will be recommended by FIMCAR consortium, this corresponds to the ODB test as it is specified in UN-ECE Regulation 94 (R94), i.e. EEVC deformable element with 40% overlap at a test speed of 56 km/h. In addition to the current R94 requirements, FIMCAR will recommend to introduce some structural requirements which will guarantee sufficiently strong occupant compartments by enforcing the stability of the forward occupant cell. With respect to the PDB assessment procedure a new metric, Digital Derivative in Y direction - DDY, was developed, described, analysed, and compared with other metrics. The DDY metric analyses the deformation gradients laterally across the PDB face. The more even the deformation, the lower the DDY values and the better the metric- result. In order analyse the different metrics, analysis of the existing PDB test results and the results of the performed simulation studies was performed. In addition, an assessment of artificial deformation profiles with the metrics took place. This analysis shows that there are still issues with the DDY metric but it appears that it is possible to solve them with future optimisations. For example the current metric assesses only the area within 60% of the half vehicle width. For vehicles that have the longitudinals further outboard, the metric is not effective. In addition to the metric development, practical issues of the PDB tests such as the definition of a scan procedure for the analysis of the deformation pattern including the validation of the scanning procedure by the analysis of 3 different scans at different locations of the same barrier were addressed. Furthermore the repeatability and reproducibility of the PDB was analysed. The barrier deformation readings seem to be sensitive with respect to the impact accuracy. In total, the deliverable is meant to define the FIMCAR off-set assessment procedure and to be a starting point for further development of the PDB assessment procedure.
The BASt-project group "Legal consequences of an increase in vehicle automation" has identified, defined and consequently compiled different automation degrees beyond Driver Assistance Systems. These are partial-, high- and full automation. According to German regulatory law, i.e. the German Road Traffic Code, it has been identified that the distinctive feature of different degrees of automation is the permanent attention of the driver to the task of driving as well as the constant availability of control over the vehicle. Partial automation meets these requirements. The absence of the driver- concentration to the traffic situation and to execute control is in conflict with the use of higher degrees of vehicle automation (i.e. high and full automation). Their use is therefore presently not compatible with German law, as the human driver would violate his obligations stipulated in the Road Traffic Code when fully relying on the degree of automation these systems would offer. As far as higher degrees of automation imply free-hand driving, further research in terms of behavioural psychology is required to determine whether this hinders the driver in the execution of permanent caution as required by sec. 1 para. 1 StVO (German Road Traffic Code). As far as liabilities according to the StVG (German Road Traffic Act) are concerned, the presently reversed burden of proof on the driver within sec. 18 para. 1 S. 2 StVG might no longer be considered adequate in case of higher degrees of automation that allow the driver to draw attention from the task of driving (in case making such use of a system would be permitted by the German Road Traffic Code). The liability of the vehicle "keeper", according to the German Road Traffic Act, would remain applicable to all defined degrees of automation. In case of partial automation, the use of systems according to their limits is accentuated. The range of use that remains within the intended must be defined closely and unmistakeably. Affecting user expectations properly can immensely help to maintain safe use, in case design-measures that exclude overreliance are not available according to the current state of the art (otherwise such measures would have to be applied primarily). In case of the higher degrees of automation that no longer require the driver- permanent attention (under the presupposition their use would be permitted by the German Road Traffic Code), every accident potentially bears the risk to cause product liability on the side of the manufacturer. Liability of the manufacturer might only be excluded in case of a breach of traffic rules by a third party or in case of overriding/ oversteering by the driver. In so far aspects of German procedural law and the burden of proof are of great importance. The project group has identified the need for further continuative research not only to advance legal assessment but also to improve basic technical conditions for vehicle automation as well as product reliability.
Um die zukünftige Entwicklung von Fahrzeugen mit alternativem Antrieb in Deutschland verfolgen, analysieren und mögliche negative Auswirkungen auf die Verkehrssicherheit zeitnah identifizieren zu können, hat die Bundesanstalt für Straßenwesen (BASt) im Jahr 2010 die Einrichtung einer langfristigen Beobachtung des Fahrzeugmarktes und des Unfallgeschehens von Pkw mit alternativen Antriebsarten initiiert. Die Daten des vorliegenden Berichtes dokumentieren die Marktdurchdringung von Personenkraftwagen mit alternativen Antriebsarten und informieren über die Unfallbeteiligung von Fahrzeugen mit alternativem Antrieb bis 2011. Es hat sich gezeigt, dass Fahrzeuge mit Hybridantrieb nach wie vor ein starkes Marktwachstum aufweisen. Die Zuwachsrate ist nahezu auf dem gleichen hohen Niveau wie in den Vorjahren (ca. 28%, getypter Bestand). Bei den reinen Elektrofahrzeugen ist die Anzahl getypter Fahrzeuge sehr stark angestiegen, von 212 im Jahr 2010 auf 1880 im Jahr 2011. Der reale Bestand an Elektrofahrzeugen (inklusive ungetypter Fahrzeuge) hat sich demgegenüber von 2010 auf 2011 auf 4.541 Pkw verdoppelt. Dies deutet auf eine zunehmende Serienreife von Elektro-Kfz hin. Pkw mit alternativem Antrieb weisen 2011 (bis auf Gas) einen höheren Anteil an Unfällen innerorts auf als Pkw mit herkömmlichem Antrieb. Hybrid Fahrzeuge haben dabei eine erhöhte Beteiligungsquote innerorts von ca. 76%. Der relativ hohe Anteil von Innerortsunfällen von alternativ betriebenen Fahrzeugen ist vor allem vor dem Hintergrund der Nutzung der Fahrzeuge zu interpretieren.
Since its beginning in 1999, the German In-Depth Accident Study (GIDAS) evolved into the presumably leading representative road traffic accident investigation in Europe, based on the work started in Hanover in 1973. The detailed and comprehensive description of traffic accidents forms an essential basis for vehicle safety research. Due to the ongoing extension of demands of researchers, there is a continuous progress in the techniques and systematic of accident investigation within GIDAS. This paper presents some of the most important developments over the last years. Primary vehicle safety systems are expected to have a significant and increasing influence on reducing accidents. GIDAS therefore began to include and collect active safety parameters as new variables from the year 2005 onwards. This will facilitate to assess the impact of present and future active safety measures. A new system to analyse causation factors of traffic accidents, called ACASS, was implemented in GIDAS in the year 2008. The whole process of data handling was optimised. Since 2005 the on-scene data acquisition is completely conducted with mobile tablet PCs. Comprehensive plausibility checks assure a high data quality. Multi-language codebooks are automatically generated from the database structure itself and interfaces ensure the connection to various database management systems. Members of the consortium can download database and codebook, and synchronize half a terabyte of photographic documentation through a secured online access. With the introduction of the AIS 2005 in the year 2006, some medical categorizations have been revised. To ensure the correct assignment of AIS codes to specific injuries an application based on a diagnostic dictionary was developed. Furthermore a coding tool for the AO classification was introduced. All these enhancements enable GIDAS to be up to date for future research questions.
A flexible pedestrian legform impactor (FlexPLI) with biofidelic characteristics is aimed to be implemented within global legislation on pedestrian protection. Therefore, it is being evaluated by a technical evaluation group (Flex-TEG) of GRSP with respect to its biofidelity, robustness, durability, usability and protection level (Zander, 2008). Previous studies at the Federal Highway Research Institute (BASt) and other laboratories already showed good progress concerning the general development, but also the need for further improvement and further research in various areas. An overview is provided of the different levels of development and all kinds of evaluation activities of the Flex-TEG, starting with the Polar II full scale pedestrian dummy as its origin and ending up with the latest legform impactor built level GTR that is expected to be finalized by the end of the year 2009. Using the latest built levels as a basis, gaps are revealed that should be closed by future developments, like the usage of an upper body mass (UBM), the validation of the femur loads, injury risk functions for the cruciate knee ligaments and an appropriate certification method. A recent study on an additional upper body mass being applied for the first time to the Flex-GT is used as means of validation of recently proposed modified impact conditions. Therefore, two test series on a modern vehicle front using an impactor with and without upper body mass are compared. A test series with the Flex-GTR will be used to study both the comparability of the impact behavior of the GT and GTR built level as well as the consistency of test results. Recommendations for implementation within legislation on pedestrian protection are made.
According to the German road traffic regulations children up to the age of 12 or a height below 150 cm have to use approved and appropriate child restraint systems (CRS). CRS must be approved according to UN-ECE Regulation No. 44. The regulation classifies CRS in 5 weight categories. The upper weight group is approved for children from 22 to 36 kg. However, studies show that already today many children weigh more than 36 kg although they have not reached a height of 150 cm. Therefore, no ECE R44 approved CRS is available for these overweight children. In conclusion, today's sizes and weights of children are no longer represented by the current version of the ECE R44. The heaviest used dummy (P10) weighs just 32.6 kg and has a height of 137.9 cm. Statistical data of German children show that already 5% of the children at a height of 137.9 cm have a weight above 45.3 kg. Regarding children at a height of 145 cm, the 95th percentile limit is at a weight of 53.3 kg. Based on these data 4 dummies with different heights and weights were defined and produced. Two of them are overweight. Up to now, there is no experience how current child restraint systems perform in a car crash if they are used by children with a weight above 36 kg and a height smaller than 150 cm. In the future, different child restraint systems will be tested with respect to the ECE R44 regulation using these overweight dummies.
The head impact of pedestrians in the windscreen area shows a high relevance in real-world accidents. Nevertheless, there are neither biomechanical limits nor elaborated testing procedures available. Furthermore, the development of deployable protection systems like pop-up bonnets or external airbags has made faster progress than the corresponding testing methods. New requirements which are currently not considered are taken into account within a research project of BASt and the EC funded APROSYS (Advanced PROtection SYStems) integrated project relating to passive pedestrian protection. Testing procedures for head impact in the windscreen area should address these new boundary conditions. The presented modular procedure combines the advantages of virtual testing, including full-scale multi-body and finite element simulations, as well as hardware testing containing impactor tests based on the existing procedures of EEVC WG 17. To meet the efforts of harmonization in legislation, it refers to the Global Technical Regulation of UNECE (GTR No. 9). The basis for this combined hardware and virtual testing procedure is a robust categorization covering all passenger cars and light commercial vehicles and defining the testing zone including the related kinematics. The virtual testing part supports also the choice of the impact points for the hardware test and determines head impact timing for testing deployable systems. The assessment of the neck rotation angle and sharp edge contact in the rear gap of pop-up bonnets is included. For the demonstration of this procedure, a hardware sedan shaped vehicle was modified by integrating an airbag system. In addition, tests with the Honda Polar-II Dummy were performed for an evaluation of the new testing procedure. Comparing these results, it was concluded that a combination of simulation and updated subsystem tests forms an important step towards enhanced future pedestrian safety systems considering the windscreen area and the deployable systems.
Evaluation of the performance of competitive headforms as test tools for interior headform testing
(2009)
The European Research Project APROSYS has evaluated the interior headform test procedure developed by EEVC WG 13, representing the head contact in the car during a lateral impact. One important aspect within this test procedure was the selection of an appropriate impactor. The WG13 procedure currently uses the Free Motion Headform as used within the FMVSS 201. The ACEA 3.5 kg headform used in Phase 1 of the European Directive and the future European Regulation on Pedestrian Protection is still discussed as a possible alternative. This paper reports work performed by the Federal Highway Research Institute (BASt) as a part of the APROSYS Task 1.1.3. The study compares the two headform impactors according to FMVSS and ACEA, in a series of basic tests in order to evaluate their sensitivity towards different impact angles, impact accuracy, the effect of differences to impactors of the same type and the effects of the repeatability and reproducibility of the test results. The test surface consisted of a steel tube covered with PU foam and PVC, representing the car interior to be tested. Despite of the higher mass of the FMH the HIC values of this impactor were generally lower than those of the ACEA headform. The FMH showed a higher repeatability of test results but a high sensitivity on the angle of roll, the spherical ACEA impactor performed better with regards to the reproducibility. In case of the ACEA impactor-, the angle of roll had no influence.
Technical progress in automotive engineering focuses at the moment on two competing branches: improving safety and reducing energy consumption. Recent consideration has been given to a third factor, cost to the consumer. Challenges are presented by demographic changes, especially with increasing participation of elderly people in road traffic. The report considers the recent history of road accidents in Germany and statistics relating to vehicle population and road performance. There is a general trend towards decreasing numbers of accidents and their severity. Transport is responsible for roughly 20% of CO2 emissions and approximately 70% of total petroleum consumption. The Federal Government has responded to these challenges by publishing the Freight Transport and Logistics Masterplan in the summer of 2008. It describes the strategic transport policy direction and the key elements of the future course of action which are to be used to ensure the provision of efficient infrastructure and, at the same time, to reduce the amount of energy consumed by vehicles and make transport more efficient, cleaner and quieter. This document contains a number of concrete measures subsumed under the following six objectives: Making optimum use of transport infrastructure - shaping transport to make it more efficient; Reducing the number of journeys - ensuring mobility; Transferring more traffic to the railways and inland waterways; Upgrading more transport arteries and hubs; Environmentally friendly, climate friendly, quiet and safe transport, and Good working conditions and good training in the freight transport industry. Progress in research is outlined in the following areas: Daytime Running Lights for Motorcycles; Safety of hydrogen vehicles - addressing safety and environmental issues by development of a Global Technical Regulation for hydrogen vehicles; Elements of active vehicle safety for elderly drivers; Periodical Technical Inspection of electronically controlled systems in road vehicles - Electronic Stability Control; Pedestrian protection; Crash Compatibility - role of collision partner in passive safety tests; Child safety; Euro NCAP - Child Restraint Systems, and German Field Operational Test on Car-to-Car and Car-to-Infrastructure Systems (SIM-TD). The research project AKTIV - "Adaptive and Cooperative Technologies for Intelligent Traffic" encompasses the design, development, and evaluation of novel driver assistance systems, knowledge and information technologies and is set up to find solutions for efficient traffic management and Car-to-Car and Car-to-Infrastructure communication for future cooperative vehicle applications. The European Statement of Principles on the Human Machine Interface (HMI), presented at the eSafety Conference, which was held in Berlin on 5/6 June 2007, addresses issues such as Real Time Traffic Information (RTTI), Legal issues of Advanced Driver Assistance Systems (ADAS) and e-security.
Within the process of integrating passenger airbags in the vehicle fleet a problem of compatibility between the passenger airbag and rear-facing child restraint systems was recognised. Especially in the US several accidents with children killed by the passenger airbag were recorded. Taking into account these accidents the deactivation of a present passenger airbag is mandatory if a child is carried in a rear-facing child restraint system at the front passenger seat in all member states of the European Union. This rule is in force since the deadline of 2003/20/EC at the latest. In the past a passenger airbag either could not be disabled or could only be disabled by a garage. Today there are a lot of different possibilities for the car driver himself to disable the airbag. Solutions like an on/off-switch or the automatic detection of a child restraint system are mentioned as an example. Taking into account the need for the deactivation of front passenger airbags two types of misuse can occur: transportation of an infant while the airbag is (still) enabled and transportation of an adult, while the airbag is disabled, respectively. Within a research project funded by BASt both options of misuse were analysed utilising two different types of surveys amongst users (field observations and interviews, Internet-questionnaires). In addition both analysis of accident data and crash tests for an updated assessment of the injury risk caused by the front passenger airbag were conducted. Both surveys indicate a low risk of misuse. Most of the misuse cases were observed in older cars, which offer no easy way to disable the airbag. For systems, which detect a child seat automatically, no misuse could be found. The majority of misuses in cars equipped with a manual switch were caused by reasons of oblivion. Also the accident analysis indicates a minor risk of misuse. From more than 300 cases of the GIDAS accident sample that were analysed, only 24 children were using the front passenger seat in cars equipped with a front passenger airbag. In most of these cases the airbag was deactivated. When misuse occurred the injury severity was low. However, when analysing German single accidents the fatality risk caused by the front passenger airbag became obvious. From the technical point of view, there were important changes in the design of passenger airbags in recent years. Not only volume and shape were modified, but also the mounting position of the entire airbag module was changed fundamentally. Even if these findings do not allow obtaining general conclusions, a clear tendency of less danger by airbags could be identified. For future vehicle development a safe combination of airbags and rear faced baby seats seems to be possible in the long term. This would mean that both types of misuse could be eliminated. For parents an easier use of child seat and car would be the result.
In the last years there has been a decline in accident figures in Germany especially for four wheeled vehicles. At the same time, accident figures for motorcycles remained nearly constant. About 17 % of road traffic fatalities in the year 2006 were motorcyclists. 33 % of these riders were killed in single vehicle crashes. This leads to the conclusion that improving driving dynamics and driving stability of powered two wheelers would yield considerable safety gains. However, the well-known measures for cars and trucks with their proven effectiveness cannot be transferred easily to motorcycles. Therefore studies were carried out to examine the safety potential of Anti Lock Braking Systems (ABS) and Vehicle Stability Control (VSC) for motorcycles by means of accident analysis, driving tests and economical as well as technical assessment of the systems. With regard to ABS, test persons were assigned braking tasks (straight and in-curve) with five different brake systems with and without ABS. Stopping distances as well as stress and strain on the riders were measured for 9 test riders who completed 105 braking manoeuvres each. Knowing the ability of ABS to avoid falls during braking in advance of a crash and taking into account the system costs, a cost benefit analysis for ABS for motorcycles was carried out for different market penetration of ABS, i.e. equipment rates, and different time horizons. The potential of VSC for motorcycles was estimated in two steps. First the kinds of accidents that could be prevented by such a system at all have been analysed. For these accident configurations, simulations and driving tests were then performed to determine if a VSC was able to detect the critical driving situation and if it was technically possible to implement an actuator which would help to stabilise the critical situation.
Annual report 2011/2012
(2013)
Traffic on German roads is increasing continuously. The research of the Federal Institute for Materials Research (BASt) is concerned with a road system that will be functioning well in the future, that is safe and economically and ecologically sustainable. Every two years, BASt reports on its tasks, research projects and selected administrative topics. The current report comprises the years of 2011 and 2012. On 151 pages, it provides an idea of current research about important topics of roads and traffic. The projects SKRIBT and SKRIBTPlus examined the behaviour of drivers in tunnels in hazardous situations. It was discovered that in situations like this many people often react inadequately and too late. The collected data were used to develop new concepts that improve behaviour in hazardous situations in tunnels. In recent years, new safety systems that improve braking behaviour in hazardous situations have been installed in vehicles. However, for end users it is difficult to compare different systems because they have no access to suitable assessments. The EU project ASSESS (Assessment of Integrated Vehicle Safety Systems for improved vehicle safety) in which BASt is involved as a key partner therefore developed a uniform procedure for assessment and legal questions. Many European countries agree: Alcohol, drugs and medication in road traffic constitute a safety risk on European roads. In order to gain new insights and to develop suitable countermeasures, the European Commission approved of the largest research project to improve road safety to date: DRUID (Driving Under the Influence of Drugs, Alcohol and Medicines). This BASt-coordinated project took five years and involved institutes from 18 European countries. The result is a comprehensive stock taking and concrete suggestions on measures to be taken. A mayor part of the work of BASt also comprises extension and maintenance of the entire road infrastructure. The report "How will we make constructions in the future: Road construction without oil?" for instance examines the question how we will maintain and extend our roads in the future with resources becoming scarcer and more expensive. Furthermore, the campaign "on" the road plays a major part at BASt. For years there has been a shortage of parking spaces for trucks on federal highways. To remedy this situation, BAST has developed a new control approach: The so-called compact parking system increases capacities and uses them more effectively by parking trucks in a line according to their planned departure time.
Accident research 2.0: New methods for representative evaluation of integral safety in traffic
(2013)
BMW has developed a procedure for rating Advanced Driver Assistance Systems (ADAS) benefits that integrates two distinct tools. The tool "S.A.F.E.R." is designed to analyze the pre-crash phase. The aim of S.A.F.E.R. is to simulate all relevant processes in sufficient detail to obtain reproducible estimates of key indicators (effectiveness, false positives, etc.). The relevant processes include not only traffic and vehicle dynamics, but also environmental and most importantly human factors. Representative distributions of factors and parameters are obtained by taking the stochastic variation of all relevant parameters into account in the simulations. The second tool, known as "ICOS", has been designed to provide a high-resolution, high-fidelity description of crash phase dynamics. If one converts the outputs of stochastic simulation into inputs for crash dynamics, the result is a comprehensive description of exactly how a safety system can reduce injuries. Applications currently focus on high-fidelity simulation of individual crashes in order to enhance our understanding and optimization of connected safety systems. An integrated simulation process thus allows an exact prediction of the effectiveness in individual cases in terms of injury severity. The development and rating of integral safety need to reflect the true efficiency in the field. The integrated approach described here could provide a valid and reproducible basis for rating connected systems of active and passive safety. In particular, "virtual experiments" using a traffic-based approach and incorporating models of all relevant processes constitute an essential element of the approach.
The presentation deals with the simulation tool rateEFFECT which intends to answer the following questions: Which active safety systems should be developed to maximize safety benefit in real traffic accidents? What is the effectiveness of a specific active safety system in the real world? How many casualties could be avoided by such a system? It is shown that a lot of information is required to simulate existing accidents in order to estimate ADAS effects. This particularly includes numerical values for the pre-crash and in-crash phase. The database GIDAS provides a required minimum number of these parameters for a statistically significant sample.
Haftung bei kooperativen Verkehrs- und Fahrerassistenzsystemen : Forschungsprojekt FE 89.0251/2010
(2012)
Die Untersuchung zum Forschungsprojekt FE 89.0251/2010 "Haftung bei kooperativen Verkehrs- und Fahrerassistenzsystemen" beschäftigt sich mit der rechtlichen Analyse verschiedener haftungsrechtlich relevanter Szenarien im Straßenverkehr, bei denen Verkehrs- und Fahrerassistenzsysteme bereits eingebunden sind, oder aber eine Einbindung in naher Zukunft zu erwarten ist. Berücksichtigt sind nur Informations- und Warnsysteme. Als relevante Szenarien werden die lokale Gefahrenwarnung und die optimale Verkehrsflusssteuerung für Lichtsignalanlagen identifiziert. Bei der lokalen Gefahrenwarnung ist zu unterschieden, ob sicherheitsrelevante Informationen von den beteiligten Verkehrs- bzw. Fahrerassistenzsystemen nur weitergeleitet oder auch bearbeitet und ausgewertet werden. Die untersuchten Fälle berücksichtigen verschiedene Fehlerquellen und unterscheiden danach, ob die involvierte Infrastruktur von öffentlicher Hand oder von einem privaten Unternehmen betrieben wird. Ergebnisse des Forschungsprojektes sind: a) Haftungsrechtliche Anspruchsgrundlagen ergeben sich aus dem allgemeinen Deliktsrecht (-§ 823 BGB), der Produkt- und Produzentenhaftung (ProdHaftG bzw. -§ 823 BGB), dem Straßenverkehrsrecht (-§-§ 7, 18 StVG), sowie der Amtshaftung (-§ 839 BGB i.V.m. Art. 34 GG). b) Informatorische oder warnende kooperative Verkehrs- und Fahrerassistenzsysteme dienen alleine einer zusätzlichen Unterstützung des Fahrers und können diesen nicht von der Pflicht befreien, die im Verkehr gebotene Sorgfalt zu beachten. c) Die Hersteller von kooperativen Verkehrs- und Fahrerassistenzsystemen müssen wie bei jedem anderen Produkt auch die berechtigten Sicherheitserwartungen der Käufer erfüllen. d) Die öffentliche Hand kommt durch das Betreiben der genannten Systeme ihrer Straßenverkehrssicherungspflicht nach. Nur wenn sie diese nicht mit der nötigen Sorgfalt erfüllt, kommt eine Haftung in Betracht. e) Durch die Verwendung von informatorischen oder warnenden kooperativen Verkehrs- und Fahrerassistenzsystemen ist keine grundsätzliche Haftungsverschiebung festzustellen. Weitere Empfehlungen: Informatorische oder warnende kooperative Verkehrs- und Fahrerassistenzsysteme können ohne zusätzliches systemspezifisches Haftungsrisiko in den Straßenverkehr eingeführt werden.
A series of drop tests and vehicle tests with the adult head impactor according to Regulation (EC) 631/2009 and drop tests with the phantom head impactor according to UN Regulation No. 43 have been carried out by the German Federal Highway Research Institute (BASt) on behalf of the German Federal Ministry of Transport, Building and Urban Development (BMVBS). Aim of the test series was to study the injury risk for vulnerable road users, especially pedestrians, in case of being impacted by a motor vehicle in a way described within the European Regulations (EC) 78/2009 and (EC) 631/2009. Furthermore, the applicability of the phantom head drop test described in UN Regulation No. 43 for plastic glazing should be investigated. In total, 30 drop tests, thereof 18 with the adult head impactor and 12 with the phantom head impactor, and 49 vehicle tests with the adult head impactor were carried out on panes of laminated safety glass (VSG), polycarbonate (PC) and laminated polycarbonate (L-PC). The influence of parameters such as the particular material properties, test point locations, fixations, ambient conditions (temperature and impact angle) was investigated in detail. In general, higher values of the Head Injury Criterion (HIC) were observed in tests on polycarbonate glazing. As the HIC is the current criterion for the assessment of head injury risk, polycarbonate glazing has to be seen as more injurious in terms of vulnerable road user protection. In addition, the significantly higher rebound of the head observed in tests with polycarbonate glazing is suspected to lead to higher neck loads and may also cause higher injury risks in secondary impacts of vulnerable road users. However, as in all tests with PC glazing no damage of the panes was observed, the risk of skin cut injuries may be expected to be reduced significantly. The performed test series give no indication for the test procedure prescribed in UN Regulation No. 43 as a methodology to approve glass windscreen not being feasible for polycarbonate glazing, as all PC panes tested fulfilled the UN R 43 requirements. The performance of the windscreen area will not be relevant for vehicle type approval according to the upcoming UN Regulation for pedestrian protection. However, it is recommended that pedestrian protection being considered for plastic windscreens to ensure at least the same level of protection as glass windscreens.
The misuse of CRS (child restraint system) is one of the most urgent problems in connection of child safety in cars. Numerous field studies show that more than two thirds of all CRS are used in a wrong way. This misuse could lead to serious injuries for the children. Surprisingly the quality of CRS use is coded much better in accident data (e.g. GIDAS) than the results of observatory field studies show. It is expected that misuse of CRS was not detected by the accident teams in a large number of the cases. An essential part in improving child seats and their usability is the knowledge of the relation between misuse and resulting injuries. For that the analysis and experimental reconstruction of accidents is an important part. For allowing an exact experimental accident reconstruction, it is necessary to have detailed information about the securing situation of the child and about the installation of the CRS in the car.
Automotive interiors have long been a potentially injurious impact area to occupants during accidents, especially in the absence of adequate padding. The U.S. Federal Motor Vehicle Safety Standard (FMVSS) 201, Occupant Protection in Interior Impact, outlines test procedures and performance criteria in order to mitigate potentially injurious head impacts to interior surfaces. FMVSS 201 specifies a finite set of impact locations and applies to passenger vehicles of a specified year range and with a gross vehicle weight rating less than 10,000 lb. In this paper, two head impact test methodologies are presented, a pendulum-test device and a Free Motion Headform (FMH) launching device, which allows for dynamic, repeatable impact evaluation of various vehicle interior surfaces and their impact attenuation abilities. The presented testing includes multiple series that evaluate the effect of differing vehicle upper interior padding on occupant head injury. One study in particular, analyzes a head impact to the side header of a heavy truck (not included in FMVSS 201) during a 90 degree rollover. Additionally, two other series of tests are presented which assess the injury reduction effect of side airbags to near side as well as far side occupants in a side impact scenario. Lastly, a forensic analysis is presented which evaluates two possible head impact locations experienced in a real world accident by analysis of the resulting interior compartment damage utilizing the FMH launching device test method. The data collected and presented includes accelerometer instrumentation and high speed video analysis. These studies demonstrate that adequate padding and airbags are very effective at mitigating head injury potential at impact speeds of 12-25 mph (19-40 kph).
Rollovers continue to be a major source of heavy truck fatalities when compared to other accident modes. Real world rollover accidents are analyzed and two distinct damage patterns are identified. Damage to heavy truck roofs can occur from lateral loading that transitions to vertical roof loading as the vehicle rolls onto its side and then over onto its roof. A second load path can occur when the vehicle has rolled onto its side and furrows into the ground generating large longitudinal friction forces between the roof and ground. A review of the previous literature and various test methodologies are presented. A sled impact test methodology is presented which allows for structural assessment of a heavy truck cab's crashworthiness in both of these loading environments. Two test series are presented using the sled impact test methodology in order to analyze real world truck rollovers using varying impact platen and contact angles. The structural deformation and failure patterns were found to be consistent with damage seen in real world accident vehicles. In each case, a second equivalent truck cab was then reinforced and tested under similar conditions to evaluate the energy management and crush resistance of a stronger cab structure. These structural reinforcements demonstrated a substantial reduction in roof crush and protected the survival space of the occupant compartment. The sled impact test procedure is an effective method for testing the structural performance of a heavy truck cab in a variety of loading scenarios comparable to real world accidents and ascertaining the load and energy load levels in these accident modes.
The European CASPER (Child Advanced Safety Project for European Roads) project studying car child safety includes a sociological approach in order to have a better understanding of the behaviour of parents driving children under 12 years old. A questionnaire was distributed via the internet in Europe with 998 parents (representing 1638 children) from 22 European countries responding. The results inform on the way parents secure their children during a car trip. Many parents did not control how their children were installed in the child restraint system (CRS). A toddler was more likely to travel into a child seat than an older child was. Regarding misuse situations, an important part of the participants did not think that they could make mistakes when fixing the child seat to the car (26%) or when placing the child into the seat (39%). This leaves an important field of action especially by communication via different media and in the CRS sale outlets.
Although the number of road accident casualties in Europe (EU27) is falling the problem still remains substantial. In 2011 there were still over 30,000 road accident fatalities. Approximately half of these were car occupants and about 60 percent of these occurred in frontal impacts. The next stage to improve a car's safety performance in frontal impacts is to improve its compatibility. The objective of the FIMCAR FP7 EU-project was to develop an assessment approach suitable for regulatory application to control a car's frontal impact and compatibility crash performance and perform an associated cost benefit analysis for its implementation. This paper reports the cost benefit analyses performed to estimate the effect of the following potential changes to the frontal impact regulation: • Option 1 " No change and allow current measures to propagate throughout the vehicle fleet. • Option 2 " Add a full width test to the current offset Deformable Barrier (ODB) test. • Option 3 " Add a full width test and replace the current ODB test with a Progressive Deformable Barrier (PDB) test. For the analyses national data were used from Great Britain (STATS 19) and from Germany (German Federal Statistical Office). In addition in-depth real word crash data were used from CCIS (Great Britain) and GIDAS (Germany). To estimate the benefit a generalised linear model, an injury reduction model and a matched pairs modelling approach were applied. The benefits were estimated to be: for Option 1 "No change" about 2.0%; for Option 2 "FW test" ranging from 5 to 12% and for Option 3 "FW and PDB tests" 9 to 14% of car occupant killed and seriously injured casualties.
The utilisation of secondary-safety systems to protect occupants has attained a very high level over the past decades. Further improvements are still possible, but increasingly minor progress is only to be had with a high degree of effort. Thus, a key aspect must be the impact to overall safety in an accident. If reliable information is available on an imminent crash, measures already taken in the pre-crash phase can result in a significantly great influence on the outcomes of the crash. With this background preventive measures are the key to a sustainable further reduction of the figures of crash victims on our roads. This paper aims to show a preventive approach that can contribute to lessening the consequences of a crash by creating an optimum interaction of measures in the fields of primary and secondary safety. To further enhance vehicle safety, driver assistant systems are already available that warn the driver of an imminent front-to-rear-end crash. The next step is to support him in his reactions or if he fails to react sufficiently, to even initiate an automatic braking when the crash becomes unavoidable. Automatic pre-crash braking can, in an ideal situation, fully prevent a crash or can significantly reduce the impact speed and thus the impact energy (and the severity of the accident). If a vehicle is being braked in the pre-crash phase, the occupants are already being pre-stressed by the deceleration. The information available about the imminent crash can be used to activate the belt tensioners and likewise other secondary safety systems in the vehicle right before the impact. The pre-crash deceleration also causes the front of the vehicle to dip. Conventional crash tests do not take this specific impact situation into consideration. This is why, for example, the influences of the pre-crash displacements of the occupants are not recorded in the test results. Furthermore, a reproducible representation of the benefit of the vehicle safety systems which prepare the occupants for the imminent impact is not possible. In order to demonstrate the functions of automated pre-crash braking and to investigate the differences during the impact as a consequence of the altered occupant positions as well as the initiation of force and deformations of the vehicle front, DEKRA teamed up with BMW to carry out a joint crash test with the latest BMW 5 series vehicle. It involved the vehicle braking automatically from a starting test speed of 64 km/h (corresponding to the impact speed set by Euro NCAP) down to 40 km/h. The test was still run by the intelligent drive system of the crash test facility. This required several modifications to be made to the test facility as well as to the vehicle. The paper will describe and discuss some relevant results of the crash test. In addition, the possible benefits of such systems will also be considered. The test supplemented the work of the vFSS working group (vFSS stands advanced Forward-looking Safety Systems).
The sequence of accident events can be classified by three essential phases, the pre-crash-sequence, the crash-sequence and the post-crash-sequence. The level of reliability of the information in the GIDAS-database (German In Depth Accident Study) is provided predominantly on the passive side. The period to evaluate active safety systems begins already in the pre-crash-sequence. The assessment of the potential of sensor- or communication-based active safety systems can only be accomplished by a detailed analysis of the pre-crash-phase. Hence the necessity to analyze the early period of the accident event in detail arises. This is possible with the help of the digital sketches of the accident site and the simulation of the accident by a simulation method of the VUFO GmbH. After simulating the pre-crash scenario it is possible to generate additional and standardized data to describe the pre-crash-sequences of an accident in a very high detail. These data are documented in a second database called the GIDAS Pre-Crash-Matrix (PCM). The PCM contains various tables with all relevant data to reproduce the pre-crash-sequence of traffic accidents from the GIDAS database until 5 seconds before the first collision. This includes parameters to describe the environment data, participant data and motion or dynamic data. This paper explains the creation of the PCM, the simulation itself and the contents and structure of the PCM. With this information of the pre-crash-sequence for various accident scenarios an improved benefit estimation and development of active safety systems can be made possible.
Rear-end collisions are the most frequent same and opposite-direction crashes. Common causes include momentary inattention, inadequate speed or inadequate distance. While most rear-end collisions in urban traffic only result in vehicle damage or slight injuries, rear-end collisions outside built-up areas or on motorways usually cause fatal or serious injuries. Driver assistance systems that detect dangerous situations in the longitudinal vehicle direction are therefore an essential safety plus. In view of this, for ADAC, systems that alert drivers to dangerous situations and initiate autonomous braking complement ESC as one of the most important active safety features in modern vehicles. The aim of ADAC is to provide consumers with technical advice and competent information about the systems available on the market. Reliable comparative tests that are based on standardised test criteria may provide motorists with important information and help them make a buying decision. In addition, they raise consumer awareness of the systems and speed up their market penetration. The assessment must focus on as many aspects of effectiveness as possible and include not only autonomous braking but also collision warning and autonomous brake assist. The work of the ADAC accident research is the development of the testing scenarios with direct link to accident situations and the identification of useful test criteria for testing.
In 2012 the fifth ESAR conference (Expert Symposium on Accident Research) was held in Hannover. ESAR is an international convention of experts, who analyze traffic accidents all over the world and discuss their results in this context, conducted at the Medizinische Hochschule Hannover every 2 years. It connected representatives of public authorities, engineers in automotive development and scientists and offers a forum with particular emphasis on In-Depth-Analyses of accident statistics and accident analyses. Special focus is placed on research on the basis of so-called "In-Depth-Accident-Investigations" [data collections at the sites of the accidents], which are characterized by extensive documentations of the sites of the accidents, of the vehicles as well as of the injuries, encompassing several scientific fields. ESAR aims at a multi-disciplinary compilation of scientific results and at discussing them on an international, scientific level. It is thus a scientific colloquium and a platform for exchanging information for all accident researchers. Experiences in accident prevention as well as in the complex field of accident reconstruction are stated and new research fields are added. Existing results of long-term research work in Europe, the US, Australia and Japan include different infrastructural correlations and give findings on population, vehicle population and driver characteristics, which offer a basis for recommendations to be derived and measures for increasing road safety.
Jahresbericht 2011/2012
(2013)
Der Verkehr auf deutschen Straßen nimmt immer weiter zu. Einem auch in Zukunft gut funktionierenden, sicheren und ökonomisch wie ökologisch verträglichen System Straße widmet sich die Forschung der Bundesanstalt für Straßenwesen (BASt). Alle zwei Jahre berichtet die BASt über ihre Aufgaben, Forschungsprojekte und ausgewählte Themen der Verwaltung. Der aktuelle Bericht umfasst die Jahre 2011 und 2012. Auf 151 Seiten gibt er einen kleinen Einblick in die aktuelle Forschung zu wichtigen Themen des Straßenwesens. In den Projekten SKRIBT und SKRIBTPlus wurde das Verhalten von Autofahrerinnen und Autofahrern in Gefahrensituationen im Tunnel untersucht. Es stellte sich heraus, dass in solchen Situationen oft falsch und zu spät reagiert wird. Durch die gesammelten Daten konnten neue Konzepte entwickelt werden, die das Verhalten bei Gefahren in Tunneln verbessern. In Kraftfahrzeugen kamen zwar in den letzten Jahren neue Sicherheitssysteme zum Einsatz, die in Gefahrensituationen das Bremsverhalten verbessern. Bisher ist es jedoch für den Endverbraucher schwer, unterschiedliche Systeme zu vergleichen, da keine geeigneten Bewertungen herangezogen werden können. Im EU-Projekt ASSESS (Assessment of Integrated Vehicle Safety Systems for improved vehicle safety), an dem die BASt maßgeblich beteiligt ist, wurde deshalb an einem einheitlichen Verfahren zur Bewertung und an juristischen Fragenstellungen gearbeitet. Viele europäische Länder sind sich einig: Alkohol, Drogen und Medikamente im Straßenverkehr gefährden die Sicherheit auf Europas Straßen. Um sich ein genaueres Bild machen zu können und geeignete Gegenmaßnahmen zu entwickeln, bewilligte die Europäische Kommission das bisher größte Forschungsprojekt zur Verbesserung der Verkehrssicherheit: DRUID (Driving Under the Influence of Drugs, Alcohol and Medicines). An dem fünf Jahre dauernden und von der BASt koordinierten Projekt, beteiligten sich Institute aus 18 europäischen Ländern. Das Ergebnis ist eine umfassende Bestandsaufnahme sowie konkrete Maßnahmenvorschläge. Die Arbeit der BASt umfasst im großen Maße auch den Ausbau und Erhalt der gesamten Straßeninfrastruktur. Der Beitrag "Wie bauen wir in der Zukunft: Straßenbau ohne OEl?" geht beispielsweise der Frage nach, wie wir bei immer knapper werdenden und teuer zu bezahlenden Ressourcen unsere Straßen zukünftig erhalten und ausbauen werden. Auch die Aktion "auf" der Straße spielt eine große Rolle in der BASt. Seit Jahren zeichnet sich ein Mangel an Parkplätzen für Lkw an Bundesautobahnen ab. Um hier Abhilfe zu schaffen, hat die BASt einen neuen Steuerungsansatz entwickelt: Beim sogenannten Kompaktparken werden Kapazitäten erhöht und effektiver genutzt, indem Lkw in Reihe, nach ihrer geplanten Abfahrzeit, geparkt werden.
Die EU hat für die Verkehrssicherheit in Europa ein anspruchsvolles Ziel vorgegeben: Bis 2010 soll die Anzahl der im Straßenverkehr Getöteten gegenüber 2000 halbiert werden. Für Deutschland kann eine erfolgreiche Zwischenbilanz gezogen werden: In den letzten 5 Jahren nahm trotz Vergrößerung des Kraftfahrzeugbestandes um 6% die Anzahl der Verkehrstoten um 29% ab, in den vergangenen 10 Jahren ist ein Rückgang um 43% zu verzeichnen. Diese im internationalen Vergleich überdurchschnittlichen Erfolge sind nicht zuletzt auch auf Fortschritte in der Fahrzeugtechnik zurückzuführen, wobei die zunehmende Verbreitung von Systemen der Aktiven Sicherheit wie ABS, BAS, ESP einen entscheidenden Anteil hat. Nach der deutlichen Reduzierung von Fahrunfällen durch ESP-® stehen nun die Auffahrunfälle im Fokus der Sicherheitsentwicklung von Mercedes-Benz. Das Paket aus verbessertem rückwärtigen Signalbild (Adaptives Bremslicht) und Brems-Assistent (BAS) wurde kürzlich durch radarbasierte Bremsassistenz ergänzt (BAS PLUS und PRE-SAFE-®-Bremse). Der Beitrag geht auf Funktion und Wirksamkeit der einzelnen Systeme ein und gibt einen Ausblick in die nähere Zukunft.
Motorcycle safety research
(2007)
Honda- global motorcycle sales exceeded the 10 million units mark since 2004, and further expansion is expected. As a responsibility for a company to provide mobility, Honda is focusing on motorcycle safety as top priority and has been working on various activities for both aspects of hardware and software. Here, we present Honda- activity for the safety technology of motorcycles. At present, Honda is promoting motorcycle safety in the four themes of prevention and collision safety such as safety education, recognition assistance, accident prevention and injury reduction. First, in the area of the safety education, the "Honda Safety Driving Promotion Center" was established in 1970, and motorcycle riders and vehicle driver trainings have been organized, and the traffic training centers are used as an actual practice field not only in Japan but also in many other regions in the world. Through our training activities, the new area of safety training with hardware assistance was developed and Honda- unique technology was accumulated such as the riding simulator which can provide experience of potentially dangerous situations without risk. Especially, the "riding trainer", the popular version of the riding simulator, was introduced at several motor shows in various countries and launched in September 2005. It was distributed first in Europe and is expected to expand globally aiming at 3000 units worldwide.. And in Europe, the newest version, which includes the suburban roads program, jointly developed with ADAC, will be released in near future. In the area of recognition assistance, "vehicle to vehicle communication technology" is under development using the advantage of being a manufacturer of both motorcycles and cars. This technology is under research as Honda "ASV-3" in Japan, and as part of C2C activity in Europe. As for the accident prevention, advanced brake systems for motorcycles to assist more effective brake operation have been expanded, Honda signed the European Road Safety Charter in April 2004 with the advanced brake systems commitment and furthermore, they are expanding according to vehicle characteristics and region. Then all models above 250 cc will have a version of the system by 2010. And as the last theme, "motorcycle airbag system" is introduced which is equipped on a mass production motorcycle for the first time in the world. It has been researched and developed for a long time as an injury reduction technology for collision accidents. Honda automobile technology was used for the research and development of the motorcycle airbag, and many specific issues such as the analysis of the collision conditions particular to motorcycles have been solved to realize today- success. It might be known that ADAC in-house crash test held in August this year confirmed the high effectiveness of the airbag system and showed a positive result. This motorcycle airbag system is equipped to the Honda Gold Wing and launched in North America in August, 2006. Also in Europe, it will be sold by the end of this year. Each theme of Honda motorcycle safety technology can be seen at the Honda booth.
Der Allgemeine Deutsche Automobil-Club e.V. (ADAC) und die Bundesanstalt für Straßenwesen (BASt) veranstalteten am 13. Oktober 2006 in Baden-Baden das 6. Symposium "Sicher fahren in Europa". Die Fachvorträge befassten sich mit den Themenbereichen: Ansätze zu mehr Verkehrssicherheit, - Verbesserung der Fahrzeugsicherheit, - Besondere Zielgruppen. Die CD-ROM dokumentiert die Grußworte, die Referate und die Podiumsdiskussion.
The overall purpose of the ASSESS project is to develop a relevant and standardised set of test and assessment methods and associated tools for integrated vehicle safety systems, primarily focussing on currently available pre-crash sensing systems. The first stage of the project was to define casualty relevant accident scenarios so that the test scenarios will be developed based on accident scenarios which currently result in the greatest injury outcome, measured by a combination of casualty severity and casualty frequency. The first analysis stage was completed using data from a range of accident databases, including those which were nationally representative (STATS19, UK and STRADA, SE) and in-depth sources which provided more detailed parameters to characterise the accident scenarios (GIDAS, DE and OTS, UK). A common analysis method was developed in order to compare the data from these different sources, and while the data sets were not completely compatible, the majority of the data was aligned in such a way that allowed a useful comparison to be made. As the ASSESS project focuses on pre-crash sensing systems fitted to passenger cars, the data selected for the analysis was "injury accidents which involved at least one passenger car". The accident data analysis yielded the following ranked list of most relevant accident scenarios: Rank Accident scenario 1 Driving accident - single vehicle loss of control 2 Accidents in longitudinal traffic (same and opposite directions) 3 Accidents with turning vehicle(s) or crossing paths in junctions 4 Accidents involving pedestrians The ranked list highlights the relatively large role played by "accidents in longitudinal traffic", and "accidents with turning vehicle(s) or crossing paths in junctions" (the second and third most prevalent accident scenarios, respectively). The pre-crash systems addressed in ASSESS propose to yield beneficial safety outcomes with specific regard to these accident scenarios. This indicates that the ASSESS project is highly relevant to the current casualty crash problem. In the second stage of the analysis a selection of these accident scenarios were analysed further to define the accident parameters at a more detailed level .This paper describes the analysis approach and results from the first analysis stage.
This work aims at bringing evidence for mass incompatibility in frontal impact for cars built according to the UNECE R94 regulation. French national injury accidents database census for years 2005 to 2008 were used for the analysis. The heterogeneity of frontal self-protection among cars of different masses is investigated, as well as the partner protection parameter offered by these cars. The last part of the analysis deals with the estimation of the benefit, in terms of fatal and severe injuries avoided, if crashworthiness was harmonized for the whole fleet of vehicle. This calculation is done for France and is extended to all Europe.
Over the past two decades the popularity of consumer crash test programs, commonly referred to as New Car Assessment Programs (NCAP), has grown across the world. They are popular among government regulators as they afford a means of promoting safety innovations and levels of vehicle performance beyond those dictated by national standards. They also fulfill the demand for information regarding the safety ranking of vehicles among consumers contemplating the purchase of a new vehicle. There is no question that consumer crash test programs greatly influence vehicle design changes as well as accelerate the fitment of new safety features. The extent to which these changes can be expected to reduce serious and potentially fatal injuries will be influenced by how well the testing protocols and associated rating schemes correctly reflect the nature of the residual safety problem they seek to address. Drawing on data contained primarily in the US National Automotive Sampling System (NASS), the field relevance of current and proposed testing and rating protocols addressing frontal crash test protection is examined. Emphasis is placed on examining how accurately injury rates computed from the dummy responses measured in consumer crash tests correspond to actual injury rates observed in the field. Additional data from Canadian field investigations and US databases such as the National Motor Vehicle Crash Causation Survey (NMVCCS) are examined to see how well frontal airbag firing times, crush pulse durations and other determinants of injury are replicated in consumer testing protocols. This portion of the analysis draws on data obtained from Event Data Recorders (EDR) in both field collisions and staged tests of the same vehicle model. Vehicle rankings and overall frontal crash test ratings were found to be particularly sensitive to the choice of injury risk functions employed in the test. This was particularly true in the case of injury risk functions used to assess neck injury potential. Neck injury risk derived from Nij was found to show the least agreement with the field. Agreement between field chest injury rates and those derived from crash tests was improved considerably when chest injury risk functions for "older" occupants were employed. The paper concludes with a discussion of how different current testing protocols could be improved to enhance their field relevance.
In road traffic accidents, a car-seat and its occupant can be subjected to various crash pulses in the case of a rear impact. This study investigates the influence of crash pulse shape on seat-occupant response and evaluates the corresponding risk of whiplash injury. For this purpose, a rigorously validated seat-occupant system model is used to study different carseat designs and crash pulses. Two different car-seat concepts are also presented which can effectively mitigate whiplash injury for a wide range of crash severity. It is shown that for crash pulses of similar severity, the level of whiplash-risk depends strongly on the combined effects of seat design and crash pulse shape.
An analysis of NASS and FARS was conducted to determine crash conditions that involved injuries that are not currently being directly addressed by vehicle safety standards or by consumer information test protocols. Analysis of both field data and US NCAP tests were conducted to determine the relative safety provided by seating position and by vehicle model year. Opportunities for improvements were determined by crash categories with large populations of injuries that were not addressed by safety tests or smaller numbers that were increasing in frequency. Areas of opportunities include improved occupant restrain in rollovers, improved frontal protection for rear seat occupants and improved fire prevention in frontal and rollover crashes.
The share of high-tensile steel in car bodies has increased over the last years. While occupant safety has generally benefited from this measure, there is a potential risk that, as a result, rescue time may increase considerably. In more than 60% of all car occupant fatalities a technical rescue has been necessary. These are in particular those cases where occupants die immediately at the accident scene. Therefore, in these cases "rescue time" is a very sensitive parameter. In addition to the general analysis of the need of technical rescue and the actual rescue time depending on model years, the injury pattern of occupants requiring technical rescue will be analysed to provide advice for rescue teams. Furthermore, a detailed analysis of rescue measures for the most popular car models depending on the safety cell design is given.
Eine moderne Verkehrsinfrastruktur ist die Voraussetzung für Mobilität und wirtschaftliches Wachstum. Um in Zeiten der Globalisierung den Wirtschaftsstandort Deutschland zu sichern und auszubauen, gilt es, flexibel auf die sich rasant ändernden Rahmenbedingungen zu reagieren. Verkehr erzeugt jedoch Lärm, den die Bevölkerung mit steigender Sensibilität wahrnimmt. Leistung, Produktivität und Lebensqualität sind durch Lärm stark beeinträchtigt. Etwa 60 % der Bevölkerung in Deutschland fühlen sich durch den Straßenverkehrslärm belästigt. Die Auswirkungen des Lärms von der Beeinträchtigung der Konzentration und Kommunikation bis hin zur möglichen Schädigung der Gesundheit sind durch umfassende Studien des Umweltbundesamtes (UBA) belegt. Im Dezember 2009 wurde nach vier Jahren Forschungsarbeit das durch das Bundesministerium für Wirtschaft und Technologie (BMWi) geförderte Forschungsprojekt "Leiser Straßenverkehr 2" erfolgreich abgeschlossen. Insgesamt elf Partner aus Industrie und Forschung haben gemeinsam Lösungen erarbeitet, wie der Straßenverkehrslärm dauerhaft reduziert werden kann. Die Projektkosten wurden auf ca. 4,5 Mio. EUR veranschlagt und werden jeweils zu 50 % vom BMWi und den Forschungspartnern getragen. Der Bau der Erprobungsstrecken wird aus Baumitteln finanziert. Auf diese Weise unterstützt das Bundesministerium für Verkehr, Bau und Stadtentwicklung (BMVBS) das Projekt "Leiser Straßenverkehr 2". Einen Schwerpunkt des Projektes stellte die Entwicklung eines leiseren Lkw-Reifens für die Antriebsachse dar. In Zusammenarbeit mit dem Projektpartner Continental AG konnte im Frühjahr 2009 ein geräuschreduzierter Lkw-Reifen auf dem Markt eingeführt werden, der gegenüber dem Vorgängerprodukt um ca. 3,5 dB(A) leiser ist. Die Firma Continental AG plant, dieses neue leisere Reifenprofil auf andere Reifendimensionen zu übertragen. Darüber hinaus wurde von der Technischen Universität Hamburg-Harburg, der Leibniz Universität Hannover und der Firma Continental AG ein Berechnungsmodell zur detaillierten Simulation eines rollenden Reifens auf einer Fahrbahn, der daraus resultierenden Reifenschwingungen und der damit verbundenen Geräusche entwickelt. Erstmals steht ein derartiges Instrument für die Reifenoptimierung zur Verfügung. Eine weitere Schallreduktion wurde im Projekt angestrebt, indem die akustische Lebensdauer von offenporigen Asphalten durch Vermeidung der Verschmutzung verlängert wird. Um dies zu erreichen, wurde ein modifiziertes Bitumen entwickelt, mit dem die Schmutzanhaftung an den Hohlraumwandungen offenporiger Asphalte minimiert werden kann. Im Rahmen der Erprobung auf der Bundesautobahn A 24 bei Berlin wird derzeit geprüft, wie sich dieser modifizierte offenporige Asphalt in der Straßenbaupraxis bewährt. Darüber hinaus wurden von der Firma Müller BBM Resonatoren entwickelt, die in die offenporige Deckschicht integriert werden und aufgrund ihrer speziellen Frequenzabstimmung ein breiteres Frequenzband zur Schallreduzierung abdecken sollen. Im Juli 2009 erfolgte in einem Testabschnitt auf der Erprobungsstrecke A 24 die bautechnische Umsetzung der Ergebnisse in die Praxis. Ein weiterer Schwerpunkt im Projekt war die akustische Optimierung von Lamellen-Fahrbahnübergängen für lange Brücken. Umfangreiche Untersuchungen wurden dabei im Prüfstand Fahrzeug/Fahrbahn der BASt durchgeführt. Im Juli 2009 wurden die neuen lärmarmen Oberflächen auf einem Fahrbahnübergang auf der A 10 bei Phoeben/Havelbrücke eingebaut und zeigten im Vergleich zum Lamellen-Fahrbahnübergang ohne Rautenelemente eine lärmreduzierende Wirkung von ca. 5 dB(A). Insgesamt zeigen die Forschungsergebnisse Entwicklungspotenziale zur weiteren Schallreduktion auf. Ein zentrales Ziel weiterführender Forschungskonzepte wird es sein, neuartige lärmarme Fahrbahnbeläge zu entwickeln und technische Lösungen für die Anwendung in der Straßenbaupraxis zu finden. Darüber hinaus sollen die Simulationsmodelle erweitert und optimiert werden, damit unter Berücksichtigung verschiedener Einflüsse aus Reifen und Fahrbahn Geräuschprognosen schnell und zuverlässig möglich sind.
Rechtsfolgen zunehmender Fahrzeugautomatisierung : gemeinsamer Schlussbericht der Projektgruppe
(2012)
Die BASt-Projektgruppe "Rechtsfolgen zunehmender Fahrzeugautomatisierung" hat über die heute verfügbaren Fahrerassistenzsysteme hinaus drei verschiedene Automatisierungsgrade identifiziert und begrifflich definiert: Teil-, Hoch- und Vollautomatisierung. Aus verhaltensrechtlicher Sicht haben sich als wesentliche Unterscheidungsmerkmale verschiedener Automatisierungsgrade die auf das Verkehrsgeschehen fokussierte Aufmerksamkeit des Fahrers und seine ständige Möglichkeit zur Fahrzeugsteuerung herausgestellt. Im Fall der "Teilautomatisierung" ist die Aufmerksamkeit des Fahrers ständig auf das Verkehrsgeschehen gerichtet und er hat aufgrund der permanent von ihm durchzuführenden Systemüberwachung die Möglichkeit zur Fahrzeugsteuerung, so dass dieser Automatisierungsgrad den aktuellen verhaltensrechtlichen Anforderungen entspricht. Die verhaltensrechtlich geforderte Aufmerksamkeitskonzentration auf das Verkehrsgeschehen und die möglicherweise fehlende Möglichkeit zur Fahrzeugsteuerung stehen jedoch der Nutzung höherer Automatisierungsgrade (Hoch- und Vollautomatisierung) derzeit entgegen. Ihre Nutzung ist gegenwärtig nicht mit dem Verhaltensrecht vereinbar, da der menschliche Fahrzeugführer gegen seine Pflichten verstieße, wenn er sich vollständig auf das System verlassen würde. Soweit ein Automatisierungsgrad zugleich eine freihändige Fahrzeugsteuerung vorsieht, bedürfte es der verhaltenspsychologischen Untersuchung, inwieweit dies den Fahrer in der Ausübung ständiger Vorsicht im Sinne von -§ 1 Abs. 1 StVO zu beeinträchtigen vermag. Hinsichtlich der Haftung nach dem Straßenverkehrsgesetz erscheint die Beweislastverteilung im Rahmen von -§ 18 Abs. 1 S. 2 StVG in den Fällen höherer Automatisierungsgrade (Hoch- und Vollautomatisierung) nicht mehr sachgerecht, soweit dem Fahrer in verhaltensrechtlicher Hinsicht die Ausrichtung seiner Aufmerksamkeit auf andere Tätigkeiten als die konventionelle Fahraufgabe ermöglicht wird. Die Regelungen zur Haftung des Fahrzeughalters bleiben bei allen Automatisierungsgraden weiterhin anwendbar. In Bezug auf die Produkthaftung zeigt sich im Fall der vollständig fahrerüberwachten Teilautomatisierung die Bedeutung der Systemgrenzen. Produkthaftungsrechtlich gewinnt hier die Einordnung des bestimmungsgemäßen Gebrauchs wesentlich an Bedeutung. Zur Absicherung dieses bestimmungsgemäßen Gebrauchs ist die nachhaltige Beeinflussung der Verkehrserwartung beim Benutzerkreis entscheidend, soweit nicht primär konstruktive Möglichkeiten nach dem Stand von Wissenschaft und Technik zur Verfügung stehen, um unberechtigtes Systemvertrauen auszuschließen. Bei den höheren Automatisierungsgraden, die nicht mehr der Fahrerüberwachung bedürfen (unter der Annahme, ihre Nutzung wäre verhaltensrechtlich möglich), wäre jeder Schaden, der nicht auf ein Fehlverhalten Dritter oder eine Übersteuerung des Fahrers zurückzuführen ist, geeignet, Herstellerhaftung auszulösen. Diesbezüglich spielt die Darlegungs- und Beweislast eine wesentliche Rolle. Sowohl auf Grund der offenen Fragen in der rechtlichen Bewertung als auch übergreifend zur Verbesserung technischer Ausgangsbedingungen sowie der Gebrauchssicherheit wird von der Projektgruppe weiterer Forschungsbedarf zur Fahrzeugautomatisierung formuliert.
Auf Grundlage von gebräuchlichen und anerkannten Modellen im Kontext der Fahrzeugführung werden zentrale Konzepte identifiziert, die mögliche Ansatzpunkte von langfristigen Wirkungen von Systemen zur Erkennung des Fahrerzustands bilden. Dabei werden nicht nur klassische Mehr-Ebenen-Modelle der Fahraufgabe mit beteiligten Kontrollprozessen berücksichtigt, sondern auch weitere Blickwinkel eingenommen, die in individuellen Persönlichkeitsmerkmalen, Einstellungen oder dem Fahrstil wichtige moderierende Einflussfaktoren identifizieren. Im Rahmen eines allgemeinen Evaluationsansatzes können grundlegende Taxonomien von Bewertungsverfahren, diverse Charakterisierungen von Bewertungsdimensionen sowie wichtige und zu dokumentierende Attribute und Fragestellungen von Evaluationsuntersuchungen beschrieben werden. In diesem Rahmen werden aus den betrachteten Modellen und Konzepten Kriterien abgeleitet, Aspekte der Operationalisierung erörtert sowie methodische Erhebungsansätze vorgeschlagen und diskutiert. Die Bandbreite der betrachteten Methoden ist vielfältig und reicht von unstrukturierten Befragungen über den Einsatz standardisierter Fragebögen bis hin zur maschinellen Erfassung von fahrrelevanten Kenngrößen über fahrzeugeigene Sensorsysteme. Besondere Bedeutung für die Realisierung einer Evaluationsstudie wird möglichst realitätsnahen Erhebungsumständen beigemessen. Daher wird als Rahmenansatz ein Field Operational Test zur Integration der diversen Erhebungsverfahren vorgeschlagen.
Elektronik und IT werden auch im Automobilbereich zunehmend Gegenstand unautorisierter Veränderungen. Diese Studie stellt einen ersten, breiteren Überblick über die praktische Relevanz elektronischer Veränderungen an Fahrzeug- und Infrastruktursystemen dar. Es liefert einen Überblick über wesentliche bekannte und existente Beispiele von Möglichkeiten derartiger Veränderungen, das Risiko ihres Auftretens und damit verbundene Gefahren. Die Ergebnisse basieren auf einer Recherche, die neben wissenschaftlichen Quellen insbesondere das Internet als neues, interaktives Medium einbezieht. Es werden Abschätzungen zur praktischen Relevanz dieser Veränderungen vorgenommen und potentielle Folgen insbesondere für die Verkehrssicherheit reflektiert. Praktische Hinweise auf elektronische Veränderungen sind an 24 Fahrzeug- und Infrastruktursystemen dokumentiert, die als Ziel teils mehrerer Arten von elektronischen Veränderungen identifiziert wurden. Dies erstreckt sich über verschiedene Domänen wie u.a. den Antriebstrang, das Fahrwerk, Infotainment, Fahrerassistenz und mehrere Infrastrukturkomponenten. Diese Systematisierung enthält zudem eine Klassifikation der agierenden Personen, wobei deren individuelle Motivationen, technische Kenntnisse und Ausstattung unterschieden werden. Das Spektrum potentiell resultierender Gefahren wird einerseits theoretisch anhand der erstellten Systematisierungen aufgezeigt und andererseits an 19 Rechercheergebnissen aus verschiedenen Bereichen illustriert. Die so vorgenommene Analyse des Gefährdungspotentials wird ergänzt durch einen Ausblick auf potentielle zukünftige Gefährdungen, die sich insbesondere in kommenden Car-to-Car Kommunikationsnetzen ergeben könnten und die weitere Erforschung von Schutzkonzepten motivieren. Während die recherchierten Veränderungen heute noch meist vom Nutzer ausgehen und das Gefährdungspotential häufig unbeabsichtigt entsteht, könnte zukünftig das vorsätzliche Herbeiführen von Gefährdungen an Bedeutung gewinnen.
Jahresbericht 2009/2010
(2011)
In der Bundesanstalt für Straßenwesen (BASt) wird bereits seit 60 Jahren Forschungsarbeit für Sicherheit, Effizienz, Ökologie sowie Ökonomie auf dem Gebiet des Straßenverkehrswesens geleistet. Der Jahresbericht stellt die Forschungsschwerpunkte aus den letzten beiden Jahren vor: Viele Einzelmaßnahmen sind im Hinblick auf das sichere Verhalten der Verkehrsteilnehmer nötig. Bei der Umsetzung der Sicherheitskampagne "Runter vom Gas" war es Aufgabe der BASt, das Bundesverkehrsministerium (BMVBS) im Entscheidungsprozess über Zielsetzung, Zielgruppendefinition, Kampagnenbotschaft sowie Form und Dauer der Kampagne zu unterstützen. Durch das "Begleitete Fahren ab 17" und die Einführung eines generellen Alkoholverbotes für Fahranfänger konnten die Unfallzahlen der Fahranfänger in den letzten Jahren deutlich gesenkt werden. Die BASt ist auch an der Entwicklung von Maßnahmen und Kampagnen für weitere Risikogruppen beteiligt, zum Beispiel Zweiradfahrer, Ältere und Kinder. Im Bereich der Fahrzeugtechnik werden kooperative Verkehrssysteme, die auf der Vernetzung von Fahrzeugen oder Fahrzeugen und Verkehrstechnik beruhen, in den Blickpunkt genommen. Geeignete Strategien für eine Bewertung der Wirkung und damit der Effizienz sind zu entwickeln, um die erwarteten Vorteile der kooperativen Verkehrssysteme nutzbar zu machen. Vorausschauende und integrierte Fahrzeugsicherheitssysteme, die neben der passiven auch die aktive Sicherheit verbessern, sind auf dem Vormarsch. Neben der Sicherheit beschäftigen aber auch rechtliche Fragestellungen die Fachleute. Auch die Entwicklung und Verbreitung von Fahrzeugen mit alternativen Antrieben mit all ihren Möglichkeiten und Risiken stellen neue Fragen an die Forschung. Hochautomatisierung (für sehr kurze Zeitspannen) wird von der BASt derzeit in verschiedenen Projekten erforscht. Weiterer Fokus der Forschungsarbeit ist es, die Schonung von Umwelt und Ressourcen zu fördern. Es werden Maßnahmen entwickelt und getestet, um die Schadstoff- sowie die Lärmbelastung zu reduzieren. Beispielsweise wird untersucht, inwieweit Nanopartikel aus Titandioxid zur Reduzierung der Stickoxidkonzentrationen an hoch belasteten Verkehrswegen eingesetzt werden können. In Pilotprojekten werden Verfahren, die sich im Labor bereits bewährt haben "auf der Straße" erprobt. Im Hinblick auf den Klimawandel wurde in der BASt eine Arbeitsgruppe eingerichtet, die sich mit den zu erwartenden Auswirkungen beschäftigt, um diesen rechtzeitig begegnen zu können. Für den Straßenbau ist im Sinne einer nachhaltigen Kreislaufwirtschaft die Verwendung vorhandener Infrastrukturen als Rohstoffquelle zu erforschen und zu nutzen. Bei neuen Asphaltkonzeptionen wird insbesondere eine Steigerung des Wertschöpfungsniveaus angestrebt. In der Abteilung Straßenverkehrstechnik werden Verfahren entwickelt, um unfallauffällige Bereiche im Straßennetz bereits in der Planungsphase zu identifizieren. Die Ausstattung der Straße mit optimierten Verkehrsbeeinflussungsanlagen und Schutzeinrichtungen, ökonomischen Beleuchtungsanlagen sowie dauerhaften, gut sichtbaren Fahrbahnmarkierungen sind Arbeitsschwerpunkte; ebenso der effektive und ökologische Winterdienst sowie gut erkennbare Warn- und Leiteinrichtungen an Arbeitsstellen. Mehrere internationale Projekte, in denen die BASt aktiv mitarbeitet, fokussieren die zivile Sicherheit der gesamten Straßeninfrastruktur. Verkehrsinfrastruktur zu optimieren und zu erhalten ist Forschungsziel im Bereich des Brücken- und Ingenieurbaus. Nachhaltigkeit ist hier zentrales Leitbild für die Zukunft. Um detaillierte Aussagen über die Belastung und den Zustand von Straßen und Brücken zu machen, baut eine abteilungsübergreifende Arbeitsgruppe der BASt ein Netz von Achslastmessstellen auf und erhebt regelmäßig Daten. Diese werden analysiert und fließen in diverse Managementsysteme der Straßen und Bauwerke für Erhaltungs- und Planungsmaßnahmen ein. Im Rahmen der Zustandserfassung und "bewertung von Fahrbahnoberflächen werden zudem alle Bundesfernstraßen alle vier Jahre messtechnisch erfasst. Zustandskarten und spezielle Statistiken sind so jederzeit für die Aufgaben von Bund, Ländern und Dritten verfügbar. Durch einen prozesssicheren automatisierten Straßenbau sollen künftig Schwachstellen beim Straßenbau vermieden werden.
The paper presents a methodology for the benefit estimation of several secondary safety systems for pedestrians, using the exceptional data depth of GIDAS. A total of 667 frontal pedestrian accidents up to 40kph and more than 500 AIS2+ injuries have been considered. In addition to the severity, affected body region, exact impact point on the vehicle, and the causing part of every injury, the related Euro NCAP test zone was determined. One results of the study is a detailed impact distribution for AIS2+ injuries across the vehicle front. It can be stated, how often a test zone or vehicle part is hit by pedestrians in frontal accidents and which role the ground impact plays. Basing on that, different secondary safety measures can be evaluated by an injury shift method concerning their real world effectiveness. As an example, measures concerning the Euro NCAP pedestrian rating tests have been evaluated. It was analysed which Euro NCAP test zones are the most effective ones. In addition, real test results have been evaluated. Using the presented methodology, other secondary safety like the active bonnet (pop-up bonnet) or a pedestrian airbag measures can be evaluated.
Qualität von on-trip Verkehrsinformationen im Straßenverkehr : BASt-Kolloquium 23. und 24.03.2011
(2011)
Am 23. und 24. März 2011 veranstaltete die Bundesanstalt fuer Straßenwesen ein, um die Ergebnisse der erwähnten Projekte und Initiativen präsentieren zu lassen und mit anderen Experten zu diskutieren. Der vorliegende Tagungsband fasst die Ergebnisse des Kolloquiums zur "Qualität von on-trip Verkehrsinformationen" zusammen. Die Bereitstellung von Verkehrsinformationen ist geprägt von vielen Akteuren. Die Wertschöpfungskette beginnt bei der Sammlung grundlegender Verkehrsdaten zur Erstellung von Verkehrsinformationen und setzt sich mit der Datenverarbeitung und -interpretation bis hin zur Meldungserstellung fort. Die Weitergabe kann über verschiedene Übertragungsmedien erfolgen und beim Nutzer (z.B. im Navigationsgerät) empfangen werden. Jeder einzelne Schritt der Wertschoepfungskette kann sowohl von unterschiedlichen Partnern (privat oder öffentlich) übernommen werden als auch in der Hand eines Partners liegen. Diese Komplexität der Zusammenarbeit spiegelt sich demzufolge auch in Qualitätsmanagementprozessen wider. Im Rahmen des Kolloquiums wurden zwei wesentliche Qualitätsaspekte näher betrachtet: - die Datenqualität mit dem Focus auf Aktualitaet, Stimmigkeit der Daten verglichen mit einer gemessenen Realitaet sowohl zu Beginn der Wertschöpfungskette als auch an jeglichen Schnittstellen, - die Prozessqualität, welche sich insbesondere mit der reibungslosen Datenübergabe an den Schnittstellen der Wertschoepfungskette beschäftigt. Beide Qualitätsaspekte helfen zu verstehen, worin die heutigen Qualitätsprobleme bestehen und welche Massnahmen im Einzelnen ergriffen werden müssten, um eine nachhaltige Verbesserung zu erreichen. Einerseits kann es vorkommen, dass die Information über ein Verkehrsereignis an einer oder mehreren Stellen der Wertschöpfungskette korrekt vorliegt, jedoch durch ungenuegende technische oder organisatorische Schnittstellen im Prozessablauf wieder verloren geht und dem Nutzer folglich nicht zur Verfügung steht. Prominentes Beispiel eines solchen Problems in der Prozessqualität ist die fehlerhafte Interpretation der Meldung im Navigationsgerät, denkbar sind solche Informationsverluste jedoch an jeder Stelle der Wertschoepfungskette. Eine wichtige Massnahme zur Verbesserung der Prozessqualität ist die Standardisierung sowie die Überprüfung, ob die definierten Standards an jeder Stelle der Wertschöpfungskette eingehalten werden. Andererseits kann es vorkommen, dass die Datenqualität in Bezug auf ihre Genauigkeit von Anfang an so schlecht ist, dass der Nutzer eine fehlerhafte oder gar keine Nachricht übermittelt bekommt. Beispiel hierfür ist die Vielzahl von Stauereignissen, die entweder nicht gesendet wurden oder gesendet wurden, obwohl sie nicht vorhanden waren. Eine wichtige Massnahme zur Verbesserung dieser Situation ist die Verbesserung der Ereignisdetektion. Der Tagungsband enthaelt Präsentationen, die den Status Quo analysieren, Methoden zur verbesserten Datenerfassung vorschlagen und Möglichkeiten zur Verbesserung von Daten- und Prozessqualität vorstellen. Offen geblieben sind darüber hinaus folgende Fragestellungen: - Wie kann die Prozessqualität der gesamten Wertschöpfungskette bei der Vielzahl der Partner kontrolliert werden? Wer überwacht die Wertschöpfungskette? Wird hierfuer überhaupt eine zentrale Stelle benötigt? Oder ist es ausreichend, wenn jeder Partner eine angemessene Eingangs bzw. Ausgangskontrolle durchführt? - Obwohl es nur eine Realität gibt, entsteht doch Wettbewerb über die (Qualität der) Information zu dieser Realität. Wie kann Konsistenz zwischen allen Anbietern von sicherheitsrelevanten Informationen erreicht werden? Wo sollte der Wettbewerb enden und wie kann dies technisch, organisatorisch und wirtschaftlich realisiert werden? - Welche Prozesse sollten geschaffen werden, um Partner zu integrieren, die sich nicht an geschaffene Qualitätsstandards halten (z.B. kommerzielle Diensteanbieter, die nicht mit der Verkehrsinformationsszene vernetzt sind)? - Und nicht zuletzt, wie kann die Wahrnehmung des Nutzers über verschiedene Qualitätslevel unterschiedlicher Produkte verbessert werden? Ist der Nutzer in der Lage, die unterschiedlichen Qualitätsstufen von Verkehrssystemen zu unterscheiden? Falls nicht, welche Art von Unterstuetzung braucht der Kunde? Ein "European Information Services Assessment Programme" vergleichbar zu Euro NCAP für Fahrzeuge? Die Ergebnisse des Kolloquiums sollen die laufende Diskussion um die Verbesserung der Qualität von Verkehrsinformationen unterstützen.
Providing effective occupant protection in rollover crashes requires supplying the occupant with a restraint system proven effective in the dynamic rollover accident mode. Preventing ejection and providing restraint sufficient to prevent potentially injurious contacts with both interior and exterior vehicle components is paramount for effective rollover occupant protection. Research has shown that the injury potential can be decreased by closely coupling the occupant to the seat. This paper focuses on the effect of restraint system slack and its relationship to occupant excursion and ejection potential during rollover. Various restraint system configurations are evaluated in rollover-type test environments. A review of prior research is presented prior to presenting new quasi-static vehicle inversion studies conducted with live surrogate occupants. Additionally, dynamic rollover testing utilizing anthropometric test devices (ATDs) is presented. The influence of belt looseness and effects of various restraint designs on the belted occupants' injury potential are discussed.
The need of passive safety devices, able to reduce the accidents and the severity of injuries suffered by motorcyclist, distinctly arises from data on accident statistics. In this paper, the effectiveness of an airbag device fitted in the biker- garments has been verified through various numerical simulations. Two simple test conditions were defined, in order to investigate the performance of the device both for back and front impacts, and simulated at various impact speeds. With the aim of providing more information about the actual capability of the airbag to reduce the severity of the injuries, one of accident scenario described by ISO 13232:2005 has been also investigated, checking the real effectiveness of the airbag strap-based firing system too. Confrontation of injury indexes resulting from simulation with and without airbag made possible a realistic evaluation of the harm reduction induced by the airbag presence.
In order to enable foreseeing or comparing the benefit of safety systems or driver assistance systems in Germany, in the United States and in Japan, the traffic accident databases in those three countries are examined. The variables used are culpable party, collision partner, accident type, and injury level and the method to re-classify the databases for comparison are proposed. The result indicates that single passenger car fatality is the most frequent in Germany and in the United States, while passenger car vs. pedestrian is the most frequent fatality scenario in Japan. When the casualty by fatality ratio is focused, the greatest difference is observed in rear-end collisions. The ratio of slight injuries in Japan yields about eighteen times as many as those in Germany, and about eight times as many as those in the United States.
Accident data shows that the vast majority of pedestrian accidents involve a passenger car. A refined method for estimating the potential effectiveness of a technology designed to support the car driver in mitigating or avoiding pedestrian accidents is presented. The basis of the benefit prediction method consists of accident scenario information for pedestrian-passenger car accidents from GIDAS, including vehicle and pedestrian velocities. These real world pedestrian accidents were first reconstructed and the system effectiveness was determined by comparing injury outcome with and without the functionality enabled for each accident. The predictions from Volvo Cars" general Benefit Estimation Model are refined by including the actual system algorithm and sensing models for a relevant car in the simulation environment. The feasibility of the method is proven by a case study on a authentic technology; the Auto Brake functionality in Collision Warning with Full Auto Brake and Pedestrian Detection (CWAB-PD). Assuming the system is adopted by all vehicles, the Case Study indicates a 24% reduction in pedestrian fatalities for crashes where the pedestrians were struck by the front of a passenger car.
An eCall device has been mounted on some vehicles in France since 2003. It is an integrated car radio/GSM/GPS system that can be used with a SIM card. When an accident occurs, a call can be sent manually or automatically made to a telephone call centre. Knowing the geographic location, the vehicle identity and the possibility of a direct communication with the people involved enables the nearest emergency services to be called out. In this context, the LAB / CEESAR have set up a study aimed at evaluating the effectiveness of this system. The purpose of this paper is to detail the E-call system evaluation method of effectiveness used and give a global synthesis of the results.
Females sustain Cervical Spine Distortion injury (CSD) more often than males. Most work dealing with the biomechanics background (e.g. injury mechanism/criteria) as well as the application in seat design/testing, focuses on the occupant model of an average male. Therefore the EU-Project ADSEAT (Adaptive Seat to Reduce Neck Injuries for Female and Male Occupants) is aimed at adding a female model for gender balanced research of CSD and improving seat design. An extensive literature review, searching for risk factors and injury criteria for males and females, was accompanied by the evaluation of different databases containing CSD cases. The database evaluations suggests that an anthropometry quite close to the 50%ile female anthropometry as known from crash test dummy design is appropriate. The results presented here form the basis for the future development of a computational female model and the improvement of seat design for better protection of both males and females in the frame of the ADSEAT-Project.
It has been pointed that most of the accidents on the roads are caused by driver faults, inattention and low performance. Therefore, future active safety systems are required to be aware of the driver status to be able to have preventative features. This probe study gives a system structure depending on multi-channel signal processing for three modules: Driver Identification, Route Recognition and Distraction Detection. The novelty lies in personalizing the route recognition and distraction detection systems according to particular driver with the help of driver identification system. The driver ID system also uses multiple modalities to verify the identity of the driver; therefore it can be applied to future smart cars working as car-keys. All the modules are tested using a separate data batch from the training sets using eight drivers" multi-channel driving signals, video and audio. The system was able to identify the driver with 100% accuracy using speech signals of length 30 sec or more and a frontal face image. After identifying the driver, the maneuver/ route recognition was achieved with 100% accuracy and the distraction detection had 72% accuracy in worst case. In overall, system is able to identify the driver, recognize the maneuver being performed at a particular time and able to detect driver distraction with reasonable accuracy.
The aim of this study was to evaluate the performance and accuracy of Event Data Recorders (EDRs). The analysis was based on J-NCAP crash tests from 2006"2007, with the corresponding EDR datasets. The pre-crash velocity, maximum delta-V and delta-V versus time history data recorded in the EDRs were compared with the reliable crash test data. The difference between the EDR pre-crash velocity and the laboratory test speed was less than 4 percent. In contrast, in several cases the maximum delta-V and delta-V versus time history data obtained from the EDRs showed uncertainty of measurement in comparisons with the reliable delta-V data. The difference in maximum delta-V in these comparisons was more than 5 percent in 10 of 14 tests and more than 10 percent in 4 of 14 tests. The EDRs underestimated the maximum delta-V in almost all tests. It was also concluded that the calculated acceleration from the EDR delta-V versus time history data showed good agreement with the instrumented accelerometer signal during the collision in almost all tests.
Impact severity is a fundamental measure for all in-depth crash investigation projects. One methodology used in the UK is based on the US Calspan software package CRASH3. The UK- in-depth crash investigation studies routinely use AiDamage3 a software package which is based on an updated version of the original CRASH3 algorithm, including enhancements to the vehicle stiffness coefficients. Real world accident-damaged vehicles are measured and their crush is correlated with a library of stiffness coefficients. These measurements are then used, along with other parameters, to calculate the crash energy and equivalent changes of velocity of the vehicles (delta-v), which is a measure of the impact severity. UK in-depth accident studies routinely validate the crash severity methodologies applied as the vehicle fleet changes. This is achieved by analysing crash test data and using the appropriate residual crush damage and other inputs to AiDamage3 and checking the program- outputs with the known crash severity parameters. This procedure checks, at least in part, the default stiffness values in the data libraries and the reconstruction methods used.
The focus of the technical innovation in the automobile industry is currently changing to sensor based safety systems, which are operating in the pre-crash phase of an accident. To get more information about this pre-crash phase for real accidents a simulation of this phase using the GIDAS database is done. The basics for this simulation are geometrical information about the accident location and the exact accident data out of the GIDAS database. This aggregated information gives the possibility to simulate an exact motion for every accident participant, using MATLAB / SIMULINK, in the pre-crash phase. After the simulation the information about the geometrical positions, the velocities and maneuvers of the drivers to an individual TTC (time to collision) are available. With those results it is possible to develop new useful sensor geometries using pre-crash scatter plots or estimate the efficiency of implemented active safety systems in combination with sensor characteristics. This simulation can be done for every reconstructed accident included in the GIDAS database, so these results can represent a wide spread basis for the further development of active safety systems and sensor geometries and characteristics
In the last years various new driver information and driver assistance systems made their way into modern vehicles and there are yet countless systems underway. However, expenses for both, the development and the construction of these systems are tremendous. Therefore the interest of evaluating systems keeps growing steadily, not only regarding the results of systems developed in the last years but also regarding system ideas. Only if at least a rough benefit estimation is given, the industry can decide which development should be supported. However, there is still a lack of transparency of possible and useful methods for these kinds of estimations. These were analyses and structured in this study.
During the last 5 years, the number of cars fitted with side airbags has dramatically increased. They are now standard equipment, even on many smaller cars or less luxurious vehicles. While some side airbags offer thoracic protection alone, there are those that combine thoracic and head protection (of which most deploy from the seat). Other systems employ separate airbags for head and thorax protection, which are designed to be effective noticeably in a crash against a pole. This paper proposes an evaluation of the effectiveness of side airbags in preventing thoracic injuries to passenger car occupants involved in side crashes. First, the target population (who can take benefit of side airbag deployment and in what circumstances) is defined. Side airbags can be especially effective in cases of impacts on the door with intrusion at a certain impact speed. Then, an example case of a side impact with side airbag deployment is given were side airbag deployment is thought to have had a positive effect on injury outcome. A further case is presented where the impact configuration is likely to have reduced the effect of side airbag deployment on injury outcome. Finally, the estimation of side airbag effectiveness (in terms of additional occupant protection brought exclusively by the airbag) is proposed by comparing injury risk sustained by occupants in (more or less) similar cars (fitted or non fitted with airbags) because, during these years, car structure, and side airbag conception have considerably evolved. In-depth accident data from France, the UK and Germany has been collected. Out of 2,035 side impact accident cases available in the databases, we selected 435 occupants of passenger cars (built from 1998 onwards) involved in an injury accident between year 1998 and year 2004 for EES (Energy Equivalent Speed) values between 20km/h and 50km/h. The occupants, belted or not, were sat on the struck side, whatever the obstacle and type of accidents (intersection, loss of control, etc.). For multiple impact crashes, the side impact is assumed to be the more severe one. Passenger cars were fitted with (96) or without (339) side airbags. Most of the potential risk explanatory variables were correctly and reliably reported in the databases (velocity " impact zone " impact angle " occupant characteristics, etc.). The analysis compared injury risks for different levels of EES and different types of side airbags. A logistic regression model was also computed with injury variables (such as thoracic AIS 2+ or AIS 3+) as the dependant variable and other variables (including airbag type and EES) as explanatory injury risk factors. Results revealed statistically non-significant reductions in thoracic AIS 2+ and AIS 3+ injury risk in side airbag equipped cars in the impact violence range selected (odds ratio between 0.84 and 0.98 depending on types of airbags). The results are discussed. The non-significance is assumed to be due to a low number of cases. Statistical analysis for head injuries was not possible due to the low number of accident cases with passenger cars fitted with head airbags in the databases. Moreover, the discrepancies between the data coming from different countries (especially calculation of EES) might have introduced instability in the analysis.
This study is aimed to investigate the correlations of impact conditions and dynamic responses with the injuries and injury severity of child pedestrians by accident reconstruction. For this purpose, the pedestrian accident cases were selected from Sweden and Germany with detailed information about injuries, accident cars, and accident environment. The selected accident cases were reconstructed using mathematical models of pedestrian and passenger car. The pedestrian models were generated based on the height, weight, and age of the pedestrian involved in accidents. The car models were built up based on the corresponding accident car. The impact speeds in simulations were defined based on the reported data. The calculated physical quantities were analyzed to find the correlation with injury outcomes registered in the accident database. The reconstruction approaches are discussed in terms of data collection, estimating vehicle impact speeds, pedestrian moving speeds and initial posture, secondary ground impact, validity of the mathematical models, as well as impact biomechanics.
Active safety systems are aimed at accident prevention, hence the knowledge required for their development is different from that required for passive safety systems aimed at injury prevention. Particularly, knowledge about accident causation is required. When looking at existing accident causation data, it is argued it fails to explain in sufficient detail how and why the accidents occur. Therefore, there is a need for detailed micro-level descriptions of accident causation mechanisms, and also of methodologies suitable for creating such descriptions. One study addressing these needs is the Swedish project FICA (Factors Influencing the Causation of Accidents and Incidents), where an accident investigation methodology suitable for active safety is developed, and in-depth accident investigations following this methodology are carried out on-scene in the area of Gothenburg by a multidisciplinary team. A preliminary aggregated analysis of different cases shows that the methodology developed is adequate for pointing out common contributing factors and devising principal countermeasures.
Rollover scenarios in Europe
(2005)
Rollover accidents seem to be a rising problem in Europe and therefore the systematic of this accident scenario should be investigated. Based on statistical investigations on major European accident databases for different countries a series of 73 real world rollover accidents was analysed. These cases were reconstructed using PC-Crash and preliminary categorised using a modified USbased rollover classification. In a first step, the rollover events were reconstructed from the point of conflict to the vehicle- rest position. The vehicles kinematics as well as its linear and rotational velocities were derived. In a second step typical velocity characteristics as well as kinematics were identified and the events categorised according to these criteria. Based on these results four main categories were defined, covering all reconstructed accidents. This categorisation was based on mechanical parameters (rotatory and translator kinematical data of the vehicle). Significant differences can be seen for different scenarios for the "first phase of rollover".
This paper set out to examine the possibilities for injury avoidance implications for older drivers in crashes, based on crash and injury patterns among older drivers and current trends in ageing in most western societies. A number of safety technologies were identified and discussed which have potential for improving vehicle older driver crash avoidance and crashworthiness. While there were some promising estimates available of the likely benefits of this technology for improving safety, it is evident that they need to be confirmed for older drivers, given their age-related disabilities and sensory limitations. Further research is urgently required to ensure that these technologies yield safety benefits without any disbenefits for older drivers.rn
Vehicle crash research at different levels is currently being conducted by several investigation groups in Spain, in some instances within various EU-funded projects. However there is a clear opportunity for increasing compatibility and maximizing usefulness, both at national and European levels, of the information collected by these groups. After reviewing on-going activities and programs in different countries, a framework for a nationwide crash investigation project is proposed: an organizational scheme is suggested as part of a future National Road Safety Strategic Plan; a map of investigation teams located in technological centres, universities and police agencies in Spain is presented; alternatives for several practical aspects such as team composition, deployment and operational budgets and project developmental stages are also discussed.
Nigeria ranks one of the highest countries in the world with the largest accident, especially when measured by whiplash associated disorders, whereas, traffic safety education rate, data and information been widely known as preventive indicators have been grossly neglected. In Nigeria, traffic safety enlightenment, awareness, political understanding and appreciation of the problem's magnitude are lacking. This study, therefore, seeks to understand and document the fact that accident causation factors in Nigeria relate more to the problem of development, poverty, knowledge and education as evidenced in most other developing countries. Among the primary accident causation factors on Nigerian roads are: - lack of a transportation system or multi-model integration - sub-standard and obsolete vehicles and road furniture - poor road maintenance, investment and engineering management - paucity of road users' and drivers' knowledge, skill, enlightenment and education of the road Use This paper submits that Nigeria being a developing nation requires purely primitive strategies being cost effective (health wise) than curative measures. It is in this light that an enduring, comprehensive and sustainable traffic safety educational programmes information base and data inventory, analysis and implementations form the focus of this study. This effort will provide basic guidelines framework and implementation procedure for a successful prevention of whiplash associated disorder resulting from road traffic crashes in Nigeria and other parts of the world.
Because of actual developments and the continuous increase in the field of drive assistant systems, representative and detailed investigations of accident databases are necessary. This lecture describes the possibility to estimate the potential of primary and secondary safety measures by means of a computerized case by case analysis. Single primary or secondary safety measures as well as a combination of both are presented. The method is exemplarily shown for the primary safety measure "Brake Assist" in pedestrian accidents. Regarding accident prevention only the primary safety measure is determined.
In-depth road traffic accident research in Spain is a fairly recent activity. In the past, only accident data that had been retrospectively processed by the national and regional traffic police forces was available. In 1999 Applus+IDIADA set up a permanent accident research unit to carry out indepth analysis of road accidents in Spain. Since then accidents involving cars, motorcycles, coaches and vulnerable road users have been thoroughly studied. The Applus+IDIADA accident research team has carried out work for the various traffic polices in Spain and it is currently involved in several research projects in which accidentology is one of the main tasks. The working methodology of the team is presented in the first part of the paper. In the framework of the European research project "Rollover" (GRD2-2001-50086), Applus+IDIADA has collected data, inspected scenarios and performed virtual reconstructions of twenty-six of the total seventy-six rollover accidents studied. The second half of the paper describes how these accident investigations were used to develop a test procedure for identifying possible improvements to the vehicle structure which augment occupant protection in a rollover scenario. In particular, a proposal for a new drop test for rollover assessment is presented. The cases were analysed for severity, in terms of injury to the occupants and damage to the vehicle, and taking into account whether a seatbelt was worn or not. The worst possible cases were identified as those that had severe occupant injuries and sizable damage to the occupant compartment when seatbelts had been worn. The most severe cases were then analysed further for impact position (roll and pitch angles) and the impact velocity. With these parameters taken into account, the most representative combinations could be found. This resulted in a series of configurations for possible drop tests. The results of the tests indicate where passenger vehicle structures need to be improved in order to increase occupant safety in the event of a rollover crash.
Institute for Traffic Accident Research and Data Analysis <Tokyo>rnAbstract: Analyses were conducted to clarify the features of rear-end collisions, using an integrated accident database developed by the Institute for Traffic Accident Research and Data Analysis (ITARDA). Focusing on neck injuries in rear-end collisions, analyses were made of the relation to struck-vehicle properties. Regarding the relation to the initial year of registration, the results did not show that newer vehicles tended to have a lower no-neck-injury rate, which was defined in this study as an index. On the contrary, in some passenger car classes, it was observed that the no-neck-injury rate was higher in newer vehicles. The effect of an active head restraint system, which is one type of anti-whiplash device, was analyzed by using not only the no-neck-injury rate but also a regression analysis. The results showed that the effect of an active head restraint system on suppressing the incidence of neck injuries was statistically significant.rn
The objective of this study was to identify aspects of the individual experience and behaviour of drivers in intersection accidents. A total of 40 accident drivers sketched their ideas and expectations relating to intersection assistance using the method of Structure Formation Technique. Using this method prepared content cards and relation cards for a subject matter are formed together in a structure through the application of an explicit set of rules. The structures generated in this process were compared with the structures of 20 control persons who have not recently experienced an accident at intersections. The basis for this comparison was a case-control design with matched samples regarding the variables age, sex, education, occupation, driving experience and annual mileage. The results of the accident reports indicate that additional assistance is instrumental in the perception of other road users. Generally the interviewed drivers were open-minded towards the use of intersection assistance systems. Drivers who have recently experienced an accident at intersections significantly more often approved of warning assistance in their vehicle than drivers who have not recently experienced an accident. Further accident experienced drivers favoured warning and information via audio warning more frequently. The ideas of the drivers were strongly shaped by the experiences with already available advanced driver assistance systems. Hence acoustic and visual warnings were generally preferred to tactile warnings. The findings also indicate a relationship between the variable age and the acceptance of automatic vehicle intervention, and the suggestion of a head up display as a configuration of a visual warning system.
The price of a new car increased almost every year for a long period. In recent years however, the budget available to most people for purchasing a car either did not grow or became even smaller. Therefore it was in the interest of some OEMs to offer economical car models in the so-called "8,000- Euro class". Here an important question arose regarding the safety of these vehicles. There is no question that the very high safety level of cars reached in Europe during the last decades should not be sacrificed as a consequence of smaller budgets. Customers with sense of responsibility have the right to be properly informed about the balance between safety and price so that they can make a deliberate decision when buying either a new or a used car. Against this background, the German magazine "AutoBILD" commissioned DEKRA to conduct fullscale frontal crash tests with a view to publishing the results. These tests have been carried out in accordance with the corresponding Euro NCAP crash test requirements and performance criteria. The tested vehicles were two new Logans produced by the manufacturer Dacia, two used cars of the type VW Golf IV (registration date 2000) and one new VW Fox. This paper describes the safety features of the vehicles and the results of the five crash tests to demonstrate state-of-the-art safety levels and what levels may be expected from vehicles in the "8,000- Euro class". Looking at real-world crashes it is of interest to think about future trends in a more detailed manner. Therefore it will be more and more necessary to supplement the federal statistics with more detailed in-depth information about the consequences of accidents and the safety performance of crashed vehicles.
In recent years the boundaries between active and passive safety blurred more and more. Passive safety in the traditional term includes all safety aspects to prevent occupants to be injured or at least injury severity should be reduced. Passive Safety starts with the collision (first vehicle contact) and ends with rescue (open vehicle doors). Within this phase the occupant has to be protected by the passenger compartment whereby no intrusion should occur. Active safety on the other side was developed to interact prior to the collision whereby the goal is to prevent accidents. The extensive interaction between active and passive safety led to the terminologies "Primary" and "Secondary" safety whereas the expression Integrated Safety Concept was generated. Within this study the most well documented single vehicle accidents with cars not equipped with ESP were identified from the PENDANT database and reconstructed. Additional cases were found in the database ZEDATU of TU Graz. In comparison each case was simulated with the assumption that the cars were equipped with ESP. The differences regarding accident avoidance or crash severity as well as reduction of injury risk were analysed.
This paper uses the national accident statistics of Great Britain to evaluate the effectiveness of Electronic Stability Control Systems (ESC) to reduce crash involvement rates. The crash experience of 8,951 cars is analysed and compared to a closely matching set of non-ESC cars using case-control methods. This is one of the largest ESC samples analysed to date. Overall the cars with ESC are involved in 3% fewer crashes although the effectiveness is substantially higher under conditions of adverse road friction. ESC equipped cars are involved in 15% fewer fatal crashes although this reduction represents the combined effect of ESC and passive safety improvements.
There is a need for detecting characteristics of pedestrian movement before car-pedestrian collisions to trigger a fully reversible pedestrian protection system. For this purpose, a pedestrian sensor system has been developed. In order to evaluate the effectiveness of the sensor system, the in-depth knowledge of car-pedestrian impact scenarios is needed. This study aims at the evaluation of the sensor system. The accident data are selected from the STRADA database. The accident scenarios available in this database were evaluated and the knowledge of the most common scenarios was developed in terms of the pedestrian trajectory, the pedestrian speed, the car trajectory, the car velocity, etc. A mathematical model was then established to evaluate the sensor system with different detective angles. It was found that in order to detect all the pedestrians in the most common scenarios on time the sensor detective angle must be kept larger than 60 degrees.
Since 2005 the German In-Depth Accident Study (GIDAS) also records aspects of active vehicle safety. This is done because vehicles are fitted with an increasing number of active safety devices which have undoubtedly an influence on the number, severity and course of accidents. Accident researchers expect that collecting active safety data will facilitate to assess and quantify the impact of these and future devices. It is the aim of this paper to outline benefits and limitations associated with the recording of active safety aspects within indepth studies. An overview about possible areas where active safety data can be useful will be given. For that purpose single safety or comfort systems will be selected to estimate the effects of an accident database which includes variables associated with these systems. Questions with regard to the limitations of collecting active safety data will be addressed. Possible items are for example the usability of the data recorded, the real accident cause, the small number of relevant accidents, the time span needed to gather a sufficient dataset, the small share of vehicles equipped with a certain system or different functionalities of systems that are supposed to fall in the same category. As a result user needs for a reasonable data collection of active safety elements will be elaborated.
Description of road traffic related knee injuries in published investigations is very heterogeneous. The purpose of this study was to estimate the risk of knee injuries in real world car impacts in Germany focusing vulnerable road users (pedestrians, bicyclists and motorcyclists) and restrained car drivers. The accident research unit analyses technical and medical data collected shortly after the accident at scene. Two different periods (years 1985-1993 and 1995-2003) were compared focusing on knee injuries (Abbreviated Injury Scale (AISKnee) 2/3). In order to determine the influences type of collision, direction and speed as well as the injury pattern and different injury scores (AIS, MAIS, ISS) were examined. 1.794 pedestrians, 742 motorcyclists, 2.728 bicyclists and 1.116 car drivers were extracted. 2% had serious ligamentous or bony injuries in relation to all injured. The risk of injury is higher for twowheelers than for pedestrians, but knee injury severity is higher for the latter group. Overall the current knee injury risk is low and significant reduced comparing both time periods (27%, p<0,0001). Severe injuries (AISKnee 2/3) were below 1%). Improved aerodynamic design of car fronts reduced the risk for severe knee injuries significantly (p=0,0015). Highest risk of injury is for motorcycle followed by pedestrians, respectively. Knee protectors could prevent injuries by reducing local forces. The classically described dashboard injury was rarely identified. The overall injury risk for knee injuries in road traffic is lower than estimated and reduced comparing both periods. The aerodynamic shape of current cars compared to older types reduced the incidence and severity of knee injuries. Further modification and optimization of the interior and exterior design could be a proper measurement. Classic described injury mechanisms were rarely identified. It seems that the AIS is still underestimating extremity injuries and their long term results.
Die vom Bundesministerium für Verkehr, Bau und Stadtentwicklung (BMVBS) beauftragte Studie zu den Auswirkungen neuartiger Lastzugkombinationen auf die Infrastruktur, den Verkehrsablauf und die Verkehrssicherheit liegt jetzt vor. Die Untersuchungen der Arbeitsgruppe der Bundesanstalt für Straßenwesen (BASt) konzentrieren sich ausschließlich auf die technischen Fragestellungen. Die wesentlichen Ergebnisse: - Eine erhöhte Straßenschädigung ist wegen der zugrunde gelegten neuen Fahrzeugtypen mit acht Achsen nicht zu erwarten. Infolge der prognostizierten allgemeinen Transportleistungssteigerung ist dieser Effekt jedoch von begrenzter Dauer. - Die Beanspruchung der Brücken wird durch 60-Tonnen-Lastzugkombinationen deutlich erhöht, was Ersatz oder Verstärkungen erforderlich machen wird. - Für die Tunnel der Bundesfernstraßen können sich wegen des deutlich größeren Ladevolumens höhere Brandlasten ergeben, mit der Folge erhöhter Anforderungen an die Sicherheitsausstattung. - Probleme bei der Befahrbarkeit von Kreisverkehren, Straßenkreuzungen und -einmündungen sowie Parkplätzen auf Rastanlagen werden sich infolge der größeren Fahrzeuglängen ergeben. Durch zusätzliche fahrzeugtechnische Einrichtungen - wie Lenkachse oder zusätzliche Gelenke - können diese gemindert werden. - Nach den vorliegenden Erfahrungen aus dem Ausland sind für ausreichend motorisierte und mit zuverlässigen Bremsanlagen ausgerüstete Transportfahrzeuge keine gravierenden Probleme hinsichtlich des Verkehrsablaufs und der Verkehrssicherheit auf Autobahnen zu erwarten. Im nachgeordneten Straßennetz (insbesondere Landes-, Kreis- und Gemeindestraßen) ist mit negativen Auswirkungen der Lastzugkombinationen sowohl auf die Verkehrssicherheit als auch auf die Leistungsfähigkeit der Straßen zu rechnen. So muss beispielsweise mit längeren Überholwegen und längeren Räumzeiten - etwa beim Abbiegen und an Bahnübergängen - gerechnet werden. - Die derzeitigen Schutz- und Rückhaltesysteme sind nicht für 60-Tonnen-Lastzugkombinationen ausgelegt. Derartige Rückhaltesysteme müssten erst entwickelt werden. Aufgrund der höheren Fahrzeuggewichte könnte die Unfallschwere bei Auffahrunfällen deutlich zunehmen. Moderne Fahrerassistenzsysteme (Spurhalteassistent sowie Bremsassistent mit Abstandsradar) könnten jedoch grundsätzlich dazu beitragen, sowohl Unfallrisiko als auch Unfallschwere zu verringern.
16% aller Verkehrstoten in Deutschland sind Motorradfahrer und die Anzahl stagniert auf diesem hohen Niveau. Daher ist eine Verbesserung der Fahrsicherheit von Motorrädern zwingend erforderlich. Im Pkw leisten aktive bzw. verstellbare Fahrwerksysteme einen positiven Beitrag zur Fahrsicherheit und helfen, Unfälle zu vermeiden. Hierzu zählen neben den Fahrdynamikregelsystemen wie ABS und ESP auch Verstelldämpfer und Stabilisatorverstellsysteme. Dämpfer- und Stabilisatorsysteme beeinflussen die dynamische Radlast und können insbesondere im ABS-Regelbereich die Fahrsicherheit erhöhen. Der Einfluss geregelter Dämpfersysteme auf die Fahrsicherheit und den Komfort im Pkw-Bereich ist in ausführlichen Untersuchungen sowohl theoretisch als auch praktisch belegt. Im Kraftradbereich existieren zwar Untersuchungen zu verstellbaren Dämpfersystemen, meist werden hier aber ausschliesslich komfortorientierte Kriterien betrachtet. Neben der Übertragbarkeit der positiven Effekte, die im Pkw-Bereich hinsichtlich Komfort und Fahrsicherheit durch geregelte Dämpfersysteme erreicht werden, auf Krafträder, ist der Einfluss geregelter Systeme auf die besonderen kraftradspezifischen Eigenschaften noch nicht ausführlich simulativ betrachtet worden. Das labile System Kraftrad, das in Abhängigkeit der Fahrgeschwindigkeit stark veränderliche Eigenschaften bezüglich der Eigenstabilisierung aufweist, neigt je nach Geschwindigkeitsbereich zu unterschiedlichem Verhalten. Die Zielsetzung dieser Arbeit liegt somit in der Überpruefung der Übertragbarkeit der aus dem Pkw-Bereich bekannten Einflüsse geregelter Dämpfersysteme auf Fahrkomfort und Fahrsicherheit im Kraftradbereich. Weiter soll hierbei auf kraftradspezifische Fahrsituationen eingegangen werden, die in der Pkw-Forschung auf Grund des abweichenden Systemverhaltens keine Berücksichtigung finden. Die Untersuchung gliedert sich in die Parameterermittlung anhand eines Versuchsmotorrades, die Erstellung und Validierung eines Mehrkörpersimulationsmodells unter Verwendung der Software VI Motorcycle fuer Adams/Car, die Definition, Auswahl und Umsetzung geeigneter Fahrmanöver sowie die Beurteilung des Sicherheitsgewinns. In der Simulationsumgebung VI Motorcycle (Adams/Car) wurden Schnittstellen geschaffen, um (semi-)aktive Fahrwerke einzubinden. Die entsprechenden Regelalgorithmen sowie die Umsetzung der Dämpferkonzepte wurden hierfür in Matlab/Simulink aufgebaut. Im Rahmen dieser Untersuchung wurden zahlreiche Regelalgorithmen und Dämpferkonzepte modelliert und getestet. Es wurde ein Fahrmanöverkatalog mit solchen Fahrversuchen erstellt, die Potenzial fuer einen Sicherheitsgewinn durch aktive Dämpfer erwarten lassen. Fuer die definierten Fahrmanöver wurden Simulationen aller entwickelten Regler und als Referenz auch eines passiven Dämpfersystems durchgeführt. Die Simulationsdaten wurden anhand vorab definierter Beurteilungskriterien ausgewertet. Die Ergebnisse lassen Potenzial zur Steigerung von Fahrsicherheit und Komfort vermuten. Die Erkenntnisse aus dem Pkw-Bereich koennen in weiten Teilen auf den Kraftradbereich übertragen werden. Ein signifikanter Einfluss auf das heutige Unfallgeschehen von Motorrädern ist jedoch als unwahrscheinlich einzuschätzen.
Um die zukünftige Entwicklung von Fahrzeugen mit alternativem Antrieb, z.B. Hybrid-, Elektro- und Brennstoffzellenfahrzeuge, in Deutschland verfolgen und analysieren zu können, hatte die Bundesanstalt für Straßenwesen (BASt) im Jahr 2010 die Einrichtung einer langfristigen Beobachtung des Fahrzeugmarktes und einer konzentrierten Beobachtung des Unfallgeschehens initiiert, mit den Zielen, die tatsächliche Umsetzung des technologischen Fortschritts in marktgängige Produkte zu verfolgen, frühzeitig genaue Kenntnis über die sich der technologischen Entwicklung anschließenden tatsächlichen Marktentwicklung zu gewinnen, und mögliche Fehlentwicklungen - insbesondere mit Blick auf die Verkehrssicherheit zeitnah zu identifizieren. Auf Basis der bisherigen Marktentwicklung ist die Analyse des Unfallgeschehens naturgemäß noch wenig aussagekräftig. Die deutliche Zunahme der Unfallbeteiligung von Hybridfahrzeugen um 95% von 2007 bis 2010 wird durch einen Bestandsanstieg von 117% in diesem Zeitraum relativiert und deutet daher eher auf ein unterdurchschnittliches Risiko, wobei keine Informationen über die durchschnittliche Fahrleistung in die Interpretationen einbezogen werden können. Der relativ hohe Anteil von Innerortsunfällen ist vor allem vor dem Hintergrund der Nutzung der Fahrzeuge zu interpretieren.
In der öffentlichen Berichterstattung und in einschlägigen Gremien ist das Thema "Kleintransporter" immer wieder Gegenstand der Behandlung. Kleintransporter vereinen die Kapazität von kleinen Güterkraftfahrzeugen mit der Flexibilität und Leistungsfähigkeit von Pkw. Zum Führen dieser Fahrzeuge wird dabei lediglich die normale Pkw-Fahrerlaubnis benötigt. Obwohl das Unfallrisiko von Kleintransportern immer noch höher ist als das für Pkw, kann festgestellt werden, dass sich der starke Anstieg der Unfallanzahlen dieser Fahrzeuge trotz weiterhin steigender Bestandszahlen nicht weiter fortgesetzt hat. Mit dem hier durchgeführten Forschungsvorhaben wurde das Ziel verfolgt, die Maßnahmen und Qualifizierungsprogramme zur Erhöhung der Verkehrssicherheit von Kleintransportern in den zurückliegenden Jahren und auch solche Maßnahmen, die zukünftig geplant sind, umfassend zu erheben. Für solche Maßnahmen, die bereits realisiert worden sind, sollte festgestellt werden, inwiefern und in welchem Maße sie Anwendung finden. Die Grundlage des Forschungsvorhabens bildeten neben einer Literaturrecherche insbesondere empirische Untersuchungen. Diese wurden in Form von mündlich-persönlichen Befragungen mit Fahrern, Maßnahmenträgern, Unternehmen, Fahrzeugherstellern und Vermietunternehmen geführt. Insgesamt konnten im Rahmen des Vorhabens 116 Personen befragt werden. Wie die Fahrerbefragung gezeigt hat, verfügen die Befragten im Allgemeinen über keine spezifische Qualifikation in Bezug auf das Führen eines Kleintransporters. Die Ausgangsbasis bildet in aller Regel die Fahrerlaubnis der Klasse B bzw. Klasse 3 (alt). In den vergangenen fünf Jahren hat lediglich jeder zweite Fahrer eine Schulung besucht. Mit einem Anteil von rund 40% sind Übertretungen von Verkehrsvorschriften durch zu schnelles Fahren der häufigste Grund von Beanstandungen. Weitere Defizite wurden in Zusammenhang mit dem Thema Ladungssicherung deutlich. Aus Sicht von Maßnahmenträgern sind die Gründe für die insgesamt geringe Teilnahme von Fahrern an Weiterbildungsmaßnahmen unterschiedlich. So ist festzustellen, dass im Bereich des Kurier-, Express und Post/Paketdienstes aufgrund der engen Einbindung des Fahrpersonals in den logistischen Leistungsprozess häufig keine Freiräume bleiben, dem Fahrpersonal eine Schulung zu ermöglichen. Hinzu kommen wirtschaftliche Zwänge der Branche. Dennoch werden von Unternehmen des Kurier-, Express- und Post/Paketdienstes verschiedene Seminare angeboten und durchgeführt. Es hat sich gezeigt, dass vor allem der Ladungssicherung ein besonderer Stellenwert beigemessen wird. Hier sehen die Unternehmen einen wichtigen Ansatzpunkt für Verbesserungsmaßnahmen, wobei es hier in erster Linie um die Senkung der Schadensquote bezogen auf das Packstück geht, d.h. die Vermeidung bzw. Senkung von Kundenreklamationen, und weniger um den Aspekt der Verkehrssicherheit. Auch im Handwerk sind Maßnahmen zur Verbesserung der Verkehrssicherheit von Kleintransportern in Angriff zu nehmen. Die Fahrzeugsicherheit ist aus Sicht der Hersteller von zentraler Bedeutung. So hat sich die sicherheitsbezogene Ausstattung der Kleintransporter in den vergangenen Jahren stetig verbessert. Kleintransporter verfügen heute bereits serienmäßig über eine Vielzahl an allgemeinen sicherheitsbezogenen Ausstattungskomponenten. In Bezug auf die laderaumbezogene Sicherheitsausstattung werden insbesondere kundenspezifische Wünsche berücksichtigt. Auch die Durchführung von Kundenschulungen ist für die Hersteller ein wichtiges Anliegen. Betrachtet man die Zahlungsbereitschaft der Kunden, so hat sich gezeigt, dass in vielen Fällen die Kunden allerdings nicht bereit sind, für die fahrzeugspezifische Verkehrssicherheit einen höheren Kaufpreis zu entrichten. Ungeachtet dessen wird sich nach Einschätzung der Fahrzeughersteller die Verkehrssicherheit in Zukunft durch neue technische Lösungen weiter erhöhen. Aus Sicht der Vermietunternehmen hat sich die aktive und passive Sicherheitsausstattung der Kleintransporter in den vergangenen 10 Jahren stark verbessert, was sich zum Teil auch auf die Kaufentscheidung der Vermietunternehmen ausgewirkt hat. So sind bspw. bei der Kaufentscheidung neben den Anschaffungskosten durchaus Attribute wie Fahrzeugsicherheit und Langlebigkeit von zunehmender Bedeutung. Als problematisch wird das Privatkundengeschäft eingestuft. Für diesen Personenkreis ist die sicherheitsbezogene Ausstattung von Kleintransportern bislang ohne Bedeutung. Eine Verbesserung der Verkehrssicherheit von Kleintransportern ist in Zukunft nur dann zu erreichen, wenn allen Akteuren bewusst wird, dass das Fahren mit einem Kleintransporter nicht unmittelbar vergleichbar ist mit dem Fahren eines Pkw. Insgesamt ist festzustellen, dass Maßnahmen zur Verbesserung der Verkehrssicherheit von Kleintransportern langfristig anzulegen sind und insbesondere auf Ebene des Fahrpersonals noch ein erheblicher Nachholbedarf zu verzeichnen ist.
Der Vorschlag, dass alle Kraftfahrzeuge auch am Tag mit Licht fahren sollen, wird seit vielen Jahren national und international diskutiert. Aufgrund dessen hat das Bundesministerium für Verkehr, Bau- und Wohnungswesen die Bundesanstalt für Straßenwesen beauftragt, die Auswirkungen des Fahrens mit Licht am Tag auf die Straßenverkehrssicherheit in Deutschland im Rahmen eines Forschungsprojektes genauer zu untersuchen. Auf der Basis einer Bewertung der internationalen Literatur zur Wirksamkeit des Fahrens mit Licht am Tag kommt die BASt zu dem Ergebnis, dass bei obligatorischer Einführung dieser Verkehrssicherheitsmaßnahme in der Bundesrepublik Deutschland eine deutliche Verbesserung der Verkehrssicherheit erwartet werden kann. Die Unfallrückgänge liegen in einer Größenordnung von über 3%. Die Befürchtung, dass sich demgegenüber Nachteile für schwächere Verkehrsteilnehmer, insbesondere Motorradfahrer, ergeben und deren Unfallhäufigkeit steigt, konnte nicht erhärtet werden. Die obligatorische Einführung des Fahrens mit Licht am Tag ist unter gesamtwirtschaftlichen Gesichtspunkten auch effizient. Den zu erwartenden Sicherheitsnutzen in Höhe von umgerechnet 1 Mrd. € je Jahr stehen Kosten in Folge des zunehmenden Kraftstoffverbrauchs und der damit verbundenen Emissionen in Höhe von 630 Mio. € (ungünstigster Fall: Fahren mit Abblendlicht) gegenüber. Auf lange Sicht sinken mit speziellen Tagfahrleuchten diese Kosten auf 150 Mio. € (Tagfahrleuchten in Glühlampentechnik) oder sogar nur 60 Millionen Euro (Tagfahrleuchten in LED-Technik). Es wird deshalb empfohlen, - für Neufahrzeuge eine Ausrüstung mit Tagfahrleuchten mit automatischer Aktivierung, gekoppelt an die Zündung, vorzuschreiben, - sowie einen Dämmerungsschalter zur automatischen Einschaltung des Abblendlichts obligatorisch einzuführen. Um einen nachteiligen Sicherheitseffekt durch die Durchmischung mit beleuchteten und unbeleuchteten Fahrzeugen zu vermeiden, ist für Altfahrzeuge ohne spezielle Tagfahrleuchten das Fahren mit Licht am Tag ganzjährig auf dem gesamten Straßennetz dringend zu empfehlen. Die Empfehlung für den bestehenden Kraftfahrzeugbestand sollte spätestens zum Zeitpunkt der Einführung der Ausstattungsvorschrift für die Neufahrzeuge ausgesprochen werden.
Die zukünftige Entwicklung der Straßenverkehrssicherheit und damit auch der Fahrzeugsicherheit wird durch gesellschaftliche, wirtschaftliche, klimapolitische und verkehrspolitische Rand- und Rahmenbedingungen und die voranschreitende technische Entwicklung geprägt sein, die auch für den Gesetzgeber eine Herausforderung darstellen. So wird sich auch das Folgeprogramm des Bundesministeriums für Verkehr, Bau und Stadtentwicklung (BMVBS) für das derzeitige aus dem Jahr 2001 stammende "Programm für mehr Sicherheit im Straßenverkehr" an den Schwerpunkten des "4th Road Safety Action Programme" ausrichten, das im Frühjahr 2010 durch die EU-Kommission veröffentlicht werden soll. Im Prozess zu einer weiteren Verbesserung der Straßenverkehrssicherheit werden unter anderem der demografische Wandel in unserer Gesellschaft, die durch eine erforderliche CO2-Reduktion bedingte Einführung alternativer Antriebe (Elektromobilität) verbunden mit Leichtbau sowie die gesetzlichen Rahmenbedingung (Wiener Abkommen) eine bedeutende Rolle spielen. Die Klärung der gesetzlichen Rahmenbedingungen ist unerlässlich, um die Vision vom unfallfreien Fahren Realität werden lassen zu können.
Mit der EU-Verordnung Nummer 661/2009 zur Typgenehmigung und allgemeinen Sicherheit von Kraftfahrzeugen wird von der EU für schwere Nutzfahrzeuge der Einbau von Spurverlassenswarnsystemen und automatischen Notbremssystemen vorgeschrieben. Mit dem obligatorischen Einbau der Systeme wird eine Reduktion der Abkommens- und Auffahrunfälle von Nutzfahrzeugen aus den Klassen M2, M3, N2 und N3, die auf Grund der hohen Masse der Fahrzeuge folgenschwer sind, erwartet. Als Einführungsdaten werden der 1. November 2013 für neue Fahrzeugtypen und der 1. November 2015 für neue Fahrzeuge genannt. Leistungsanforderungen beziehungsweise technische Spezifikationen, denen die Systeme genügen müssen, liegen jedoch noch nicht vor. Diese werden derzeit von einer Expertengruppe auf UN-ECE-Ebene entwickelt. Dabei wird versucht, technologieneutrale Beschreibungen für die Ausgestaltung der Systeme zu erstellen, die gleichzeitig sowohl den gewünschten Nutzen für die Verkehrssicherheit garantieren, sich aber auch an der derzeit vorhandenen und realisierbaren Technologie orientieren. Darüber hinaus müssen die Systemkosten in einem vernünftigen Verhältnis zum Sicherheitsnutzen stehen. Ziel ist es, im Laufe des Jahres 2011 Vorschläge für die Legislative vorzulegen. Es wird über den Stand der Arbeiten, offene Fragestellungen, Herausforderungen bei der Ausgestaltung der technischen Anforderungen sowie sich abzeichnende Ergebnisse berichtet. Dabei sind die Arbeiten in Bezug auf Lane Departure Warning Systems (LDWS) bereits weiter fortgeschritten als zu Advanced Emergency Braking Systems (AEBS).
Nutzfahrzeuge der Kategorie N1 sind Fahrzeuge mit einem maximalen zulässigen Gesamtgewicht (zGG) bis zu 3500 kg. Da für diese Fahrzeuge keine Geschwindigkeitsbegrenzung und Fahrzeiterfassung vorgeschrieben ist, sind diese Fahrzeuge sehr häufig in Unfälle involviert. Durch den großen Laderaum und die hierdurch mögliche hohe Schwerpunktlage sind die Fahrer hinsichtlich der Adaption an die Beladungszustände häufig überfordert. Um den Einfluss der Fahrdynamikregelung auf die Sicherheit von N1 Fahrzeugen aufzuzeigen wurden standardisierte Fahrmanöver mit und ohne ESP bei unterschiedlichen Beladungszuständen durchgeführt. Hierfür wurde ein Fahrzeug mit einer Stütz- und Beladungsvorrichtung sowie mit der notwendigen Sensorik zur Erfassung fahrdynamischer Kennwerte und der Bremsdrücke ausgestattet. Die Auswertung der fahrdynamischen Kenngrößen zeigte deutlich den Beladungseinfluss auf die Fahrdynamik und die Minimierung dieses Einflusses durch ein ESP System mit der Mehrwertfunktion Load Adaptiv Control. Da N1-Fahrzeuge häufig auch von wenig erfahrenen Fahrern, z. B. Ferienjobs, im Straßenverkehr bewegt werden, sollten im Rahmen dieser Studie auch Fahrversuche mit ungeübten Probanden am Fahrsimulator berücksichtigt werden, um das Sicherheitspotential des ESP für die normale Fahrerpopulation aufzuzeigen. Hierzu wurde ein echtzeitfähiges Simulationsmodell eines Sprinters in CarSim erstellt und mit den Ergebnissen der Realfahrten validiert. Die Versuche am Fahrsimulator sollten das Sicherheitspotential des ESP bei der durchschnittlichen Fahrerpopulation aufzeigen. Hierzu wurden sowohl die im Realversuch durchgeführten standardisierten Fahrmanöver als auch Szenarien wie Ausweichmanöver, Teststreckenfahrt etc. nachgebildet. Insbesondere bei plötzlich auftauchenden Hindernissen hat sich der Vorteil des ESP deutlich gezeigt. Auch die Vorteile der Lasterkennung für das Regelverhalten des ESP wurde nachgewiesen.
Nutzfahrzeuge der Kategorie N1 sind Fahrzeuge mit einem maximalen zulässigen Gesamtgewicht (zGG) bis zu 3500 kg. Da für diese Fahrzeuge keine Geschwindigkeitsbegrenzung und Fahrzeiterfassung vorgeschrieben ist, sind diese Fahrzeuge sehr häufig in Unfälle involviert. Durch den großen Laderaum und die hierdurch mögliche hohe Schwerpunktlage sind die Fahrer hinsichtlich der Adaption an die Beladungszustände häufig überfordert. Um den Einfluss der Fahrdynamikregelung auf die Sicherheit von N1 Fahrzeugen aufzuzeigen wurden standardisierte Fahrmanöver mit und ohne ESP bei unterschiedlichen Beladungszuständen durchgeführt. Hierfür wurde ein Fahrzeug mit einer Stütz- und Beladungsvorrichtung sowie mit der notwendigen Sensorik zur Erfassung fahrdynamischer Kennwerte und der Bremsdrücke ausgestattet. Die Auswertung der fahrdynamischen Kenngrößen zeigte deutlich den Beladungseinfluss auf die Fahrdynamik und die Minimierung dieses Einflusses durch ein ESP System mit der Mehrwertfunktion Load Adaptiv Control. Da N1-Fahrzeuge häufig auch von wenig erfahrenen Fahrern, z. B. Ferienjobs, im Straßenverkehr bewegt werden, sollten im Rahmen dieser Studie auch Fahrversuche mit ungeübten Probanden am Fahrsimulator berücksichtigt werden, um das Sicherheitspotential des ESP für die normale Fahrerpopulation aufzuzeigen. Hierzu wurde ein echtzeitfähiges Simulationsmodell eines Sprinters in CarSim erstellt und mit den Ergebnissen der Realfahrten validiert. Die Versuche am Fahrsimulator sollten das Sicherheitspotential des ESP bei der durchschnittlichen Fahrerpopulation aufzeigen. Hierzu wurden sowohl die im Realversuch durchgeführten standardisierten Fahrmanöver als auch Szenarien wie Ausweichmanöver, Teststreckenfahrt etc. nachgebildet. Insbesondere bei plötzlich auftauchenden Hindernissen hat sich der Vorteil des ESP deutlich gezeigt. Auch die Vorteile der Lasterkennung für das Regelverhalten des ESP wurde nachgewiesen.
With the present brake signal pattern the traffic behind only receives the information that the brakes are applied, however, the drivers have no information about the intensity of the braking maneuver. In this report it is examined on the basis of a study of the literature, how the rear signal pattern could be optimized for a special representation of emergency braking maneuvers. In principle there are two suitable possibilities to reduce the driver reaction time: - An increase in the area and luminance of the brake lights intuitively provide the drivers following with an impression of approaching the vehicle in front , - Flashing lights are particularly suited to attract the attention of the driver following to the deceleration of the vehicle ahead , - The following advancement is recommended as an optimization of the rear signal pattern: When the brake assistant or ABS actuates or at a vehicle deceleration rate greater than 7 m/s-², the emergency braking maneuver is signaled by flashing of the third high-mounted brake light at a rate of 3-5 Hz. As an option, the area and luminance of the two lower brake lights could be increased in addition. These measures require changes to ECE Regulations No. 7 and No. 48 as well as to the Vienna Convention. The purpose of the described solution is to reduce the number or severity of rear-end accidents.
Der Allgemeine Deutsche Automobil-Club e.V. (ADAC) und die Bundesanstalt für Straßenwesen (BASt) veranstalteten am 15. Oktober 2009 in Baden-Baden ihr 7. Symposium \"Sicher fahren in Europa\". Nach 1991, 1994, 1997, 2000, 2003 und zuletzt 2006 trafen sich auch dieses Mal wieder zahlreiche Fachleute aus Wissenschaft und Politik, Industrie, Wirtschaft und Verbänden aus dem In- und Ausland, trugen neue Forschungsergebnisse vor und erörterten aktuelle Ansätze zur Erhöhung der Verkehrssicherheit. Dabei ging es in den Referaten und Diskussionsbeiträgen und in den vier Workshops vor allem darum, die verkehrspolitischen Entwicklungen und Herausforderungen für die europäische Verkehrssicherheitsarbeit im Hinblick auf folgende Themen zu beleuchten: "Verkehrssicherheit Junger Fahrer", - Das "Auto der Zukunft", - "Demographischer Wandel", - "Landstraßensicherheit". Den Grundsatzreferaten folgten vertiefte Bearbeitungen in den Workshops. Die CD-ROM dokumentiert die Grußworte, Referate und Diskussionsbeiträge.
Neben der zunehmenden Bedeutung der aktiven Sicherheit bleiben Maßnahmen der passiven Sicherheit bei der Entwicklung moderner Kraftfahrzeuge unabdingbar. Die Weiterentwicklung von Maßnahmen zum passiven Fußgängerschutz war zunächst größtenteils durch Verbraucherschutztests wie zum Beispiel Euro NCAP oder JNCAP getrieben und ist nun auch durch gesetzliche Regelungen verpflichtend geworden. Im vorangegangenen Forschungsprojekt der BASt FE 82.229/2002 Schutz von Fußgängern beim Scheibenaufprall ist die Grundlage eines modularen Prüfverfahrens für den Kopfaufprall im Bereich der Windschutzscheibe, bestehend aus einem Versuchs- und einem Simulationsteil, erarbeitet worden. Im Rahmen dieses Projektes wurde ein hybrides Testverfahren bestehend aus Versuch und Simulation ausgearbeitet, das den Bereich der Windschutzscheibe und dabei auch crashaktive Systeme wie Airbags berücksichtigt. Das Testverfahren kombiniert Komponentenversuche mit einem Simulationsteil, in dem Fahrzeug-Fußgänger-Simulationen und lmpaktorsimulationen durchgeführt werden. Zusätzliche Dummyversuche dienten zur Bewertung des Testverfahrens. Alle erarbeiteten virtuellen und realen Testmethoden wurden an einem Referenzfahrzeug (Opel Signum), welches repräsentativ für eine durchschnittliche Mittelklasselimousine steht, durchgeführt. Das Fahrzeug wurde mit einem Airbagsystem ausgerüstet und der Testprozedur mit und ohne diesem System vergleichend unterzogen. Innerhalb dieser Untersuchungen konnte gezeigt werden, dass neue Testmethoden unter Ausnutzung von Simulationen und Komponententests es erlauben, realistischere Versuchsbedingungen unter Berücksichtigung von potenziellen Kopfaufprallpositionen und -zeiten zu definieren. Dabei können sehr gute Übereinstimmungen zwischen Fußgängersimulation und Dummyversuch erreicht werden. Die Randbedingungen für den Kopfaufprall und die Aufprallzeit wurden durch den Einsatz von Fußgängermodellen ermittelt. Weiterhin ermöglichen die Simulationen, zusätzliche Einflussdaten wie Vektoren mit den Kopfaufprallgeschwindigkeiten und -winkeln zu bestimmen.
In spite of today's highly sophisticated crash test procedures like the different NCAP programs running world-wide, bad real world crash performance of cars is still an issue. There are crash situations which are not sufficiently represented by actual test configurations. This is especially true for car to car, as well as for car to object impacts. The paper describes reasons for this bad performance. The reasons are in principal bad structural interaction between the car and its impact partners (geometric incompatibility), unadjusted front end stiffness (stiffness incompatibility) and collapse of passenger compartments. To show the efficiency of improving cars' structural behaviour in accidents with different impact partners an accident data analysis has been taken out by members of European Project VC-COMPAT. Accident data analysis has shown that in Germany between 15,000 and 20,000 of the now severely injured car occupants might get less injured and between 600 and 900 car occupant fatalities might be saved. Similar results arise for the UK.
In September 2004 the first international symposium called ESAR (Expert Symposium on Accident Research) was carried out at the University of Hannover (Germany). The idea for such international conference was to bring together experts from the fields of accident investigation teams worldwide to present their results for a common audience of people from government, industry and other universities. The first conference was a really sufficient one and followed by the second symposium also at the Hannover Medical School two years later in 2006. This two year rhythm was now continued with the third conference in Hannover again in 2008. It is planned to carry out ESAR every two years also in the future. ESAR is a scientific colloquium and can be seen as a platform for exchange of information on accident research issues based on methodologies of investigation, injury mechanisms and injury assessment, accident causation and other issues of statistical accident data analysis. Representatives from authorities as well as from medical and technical institutions come together to discuss new research issues and exchange experiences on accident prevention and the complex field of accident reconstruction. Special focus was given to the target the European Union set for itself in 2000 which stipulates that within 10 years the number of person killed in road traffic accidents must be cut in half. To reach this goal, optimized measures, comprehensive research and analysis are necessary. A key hurdle comes from the European Union extension to 27 member states, each featuring different levels of traffic safety standards and different accident scenarios. Existing results from long term research projects in Europe, the USA, Australia and Japan including analyses of infrastructure, population, vehicle fleet and driver behaviour offer an excellent basis for understanding and improving countermeasures and research support needs in underdeveloped countries. ESAR's goal is to bring together researchers from all parts of the world, who will report on their methods and recommendations to improve traffic safety based on "In-Depth-Investigations" of real world accidents. These In-depth-investigations of accidents require thorough documentation and an accident data analysis on multidisciplinary levels which must be carried out immediately after it occurs. ESAR presents scientists the opportunity to present their studies on a common basis of research level.
Ziel der Studie war es, die Auswirkungen des Fahrens mit Tempomat auf das Fahrverhalten zu untersuchen. Tempomaten haben in Deutschland eine relativ große Verbreitung, die insgesamt bei 10 bis 20 % der Fahrzeuge liegt, in der Oberklasse sogar bei 50 %. Studien, mit denen man die Auswirkungen des Tempomaten auf das Fahrverhalten bewerten kann, liegen bislang nicht vor. Relativ gut untersucht ist dagegen der Abstandsregelautomat ACC (adaptive cruise control), der zusätzlich zur Geschwindigkeitsregelung auch einen sicheren Abstand zu voranfahrenden Fahrzeugen hält. Bei ACC ergeben sich neben positiven Veränderungen im Sinne einer besseren Einhaltung von Geschwindigkeitsbegrenzungen auch Hinweise, dass Fahrer langsamer auf Reize in der Umwelt reagieren, die eine Veränderung der Geschwindigkeit notwendig machen (zum Beispiel Geschwindigkeitsbegrenzungen, einsetzender Regen oder Nebel und so weiter). Weiter zeigen diese Studien, dass sich Fahrer mit ACC eher mit Nebenaufgaben beschäftigen, sodass die Spurhaltung verschlechtert wird. Da der Tempomat bei Strecken mit geringem Verkehrsaufkommen ähnlich wie ACC die Geschwindigkeitsregelung übernimmt, liegt die Vermutung nahe, dass sich auch für den Tempomat ähnliche negative Verhaltenswirkungen ergeben könnten. Um dies zu prüfen, wurde im Fahrsimulator des DLR mit Bewegungssimulation eine Studie durchgeführt, in der 11 Tempomat-Nutzer und 11 Novizen jeweils drei Fahrten durchführten, ohne System, mit Tempomat und mit ACC. Bei jeder Fahrt waren zwei Autobahnabschnitte und ein Stück Landstraße zu bewältigen, wobei die Geschwindigkeitsbegrenzungen wechselten, um so die Anpassungsreaktionen der Fahrer untersuchen zu können. Auf der Autobahn wurde ein Stau, auf Landstraße ein Stück mit Nebel eingeführt, um die Reaktionen auf weitere Umweltreize, die eine Anpassung der Geschwindigkeit erfordern, beobachten zu können. Schließlich wurden auf der Autobahn zwei Abschnitte mit Nebenaufgaben (eine visuelle Suchaufgabe) realisiert, um eine mögliche verstärkte Abwendung von der Fahraufgabe zu prüfen. Der Altersdurchschnitt der Fahrer lag bei 38 Jahren. Bei jeder Fahrt wurden das Fahrverhalten und physiologische Reaktionen (Herzrate) aufgezeichnet. Außerdem wurden Befragungen zum Befinden, der Beanspruchung beim Fahren und der Bewertung der Systeme durchgeführt. In den Bedingungen mit Tempomat oder ACC wurden die Probanden instruiert, diese Systeme auch möglichst zu nutzen. Dies führte zu Nutzungshäufigkeiten von ca. 90 % der Fahrtzeit. Insgesamt sind die Ergebnisse für Tempomat und ACC sehr ähnlich. Geschwindigkeitsbegrenzungen werden besser eingehalten. Es werden geringere maximale Geschwindigkeiten erreicht. Auch die Standardabweichung der Geschwindigkeit ist verringert, was zu einem besseren Verbrauch und Verkehrsfluss führen könnte. Die Abstände zu voranfahrenden Fahrzeugen verändern sich durch den Tempomat nicht. Bei ACC ist der Abstand vergrößert, was allerdings durch die spezielle Auslegung begründet sein könnte, die keine Anpassung zuließ. Wenn die Geschwindigkeit aufgrund von Geschwindigkeitsbegrenzungen oder Nebel reduziert werden musste, erfolgte dies mit Tempomat und ACC um circa 5 Sekunden verzögert. Offensichtlich mussten sich die Fahrer hier erst bewusst machen, dass sie eingreifen müssen und dass die Systeme diese Anpassung nicht leisten. Hinsichtlich eines möglichen Missbrauchs der Systeme ergaben sich in dieser Studie bei der Bearbeitung von Nebenaufgaben keine deutlichen Hinweise. Weder mit Tempomat noch mit ACC werden mehr Nebenaufgaben bearbeitet. Die negativen Effekte der Nebenaufgaben auf die Spurhaltung sind deutlich, aber in allen Bedingungen zu finden. Der einzige Hinweis auf eine Gefahr liegt darin, dass die Geschwindigkeit bei der Bearbeitung von Nebenaufgaben mit ACC und Tempomat nicht so stark verringert wird wie bei der Fahrt ohne Systeme. Ob dies das Unfallrisiko erhöht, ist mit der vorliegenden Studie nicht zu beantworten. Schließlich beurteilten die Fahrer beide Systeme positiv und waren der Meinung, dass die Fahrt dadurch sicherer und weniger anstrengend wird. Insgesamt führt damit das Fahren mit Tempomat hinsichtlich der mittleren Geschwindigkeit zu Veränderungen des Fahrverhaltens, die eher positiv zu bewerten sind. Auf der anderen Seite zeigen sich wie auch bei ACC Hinweise, dass eine Geschwindigkeitsanpassung mit System deutlich verzögert geschieht, was als vermindertes Situationsbewusstsein interpretiert werden kann. Wünschenswerte Erweiterungen der Funktionalität (zum Beispiel Anpassung an Verkehrszeichen) könnten diesen Effekt noch verstärken. Angesichts dieser Bedenken und der technischen Weiterentwicklungen sind weitere Studien dringend notwendig.
Fahrdynamikregelungen für Zweispurfahrzeuge haben in der letzten Dekade stark dazu beigetragen, die Getötetenzahlen im Straßenverkehr auf einen seit dem zweiten Weltkrieg nicht gekannten Tiefststand zu senken. Die Getötetenzahlen bei Einspurfahrzeugen, speziell Motorrädern, sind im selben Zeitraum bei weitem nicht im selben Maße gesunken. Zwar existieren für Motorräder ABS-Bremssysteme und Antriebsschlupfregelungen, aber darüber hinaus gehende technische Lösungen zur Stabilisierung des Motorrads sind nicht bekannt. Ziel dieser Arbeit ist es, abzuschätzen, ob Fahrdynamikregelungen für Motorräder einerseits technisch möglich sind und andererseits zur deutlichen Senkung der Unfallzahlen von Motorrädern beitragen können. Aus einer Analyse des Unfallgeschehens wurden für zukünftige Fahrdynamikregelungen ungebremste Kurvenunfälle durch ßberschreiten der maximalen Querbeschleunigung und durch Reibwertsprünge (wie beispielsweise glatte Fahrbahnabschnitte, Sand, ßl, Bitumen und dergleichen) als relevante Unfalltypen identifiziert und als Hauptszenarien für potenzielle Fahrdynamikregelsysteme herangezogen. Ihr Anteil am Unfallgeschehen von Motorrädern wurde mit etwa 4 bis 8 % abgeschätzt. Dazu wurden Motorradexperten nach ihren bisher erlebten Unfällen befragt und die Unfälle einer großen Unfalldatenbank im Detail untersucht. Die beiden Grundszenarien wurden mittels Simulationen und Fahrversuchen hinsichtlich besonderer Erkennungsmerkmale untersucht. Dabei erwies sich die Schwimmwinkelgeschwindigkeit des Fahrzeugs als robustes Kriterium zur Erkennung beginnender ungebremster Kurvenunfälle. ßhnlich große Schwimmwinkelgeschwindigkeiten wurden bei einer Vielzahl von unkritischen Fahrten nicht gefunden. Die Beeinflussbarkeit der untersuchten kritischen Fahrsituationen wurde mit Hilfe eines Modells für die Fahrzeugbewegung während der kritischen Fahrsituationen abgeschätzt. Eine Beeinflussung des Rollmoments zum Aufrichten des Fahrzeugs ist nicht möglich, da weder die Seitenkraft am Reifen in diesen Szenarien, wie es erforderlich wäre, erhöht werden kann, noch realistisch dimensionierte Kreisel diese Stabilisierung erbringen können. Eine Beeinflussung der Schwimmbewegung ist hingegen technisch sinnvoll durch Veränderung der Seitenkräfte über Bremsschlupf an den Rädern darstellbar. Auf diese Weise kann eine Destabilisierung des gleitenden Fahrzeugs beim ßbergang von Niedrig zurück auf Hochreibwert vermieden werden. Damit lässt sich jedoch nur eine kleine Untermenge der genannten Unfallszenarien günstig beeinflussen, sodass als Ergebnis dieser Untersuchung das Potenzial von Fahrdynamikregelungen als recht gering einzuschätzen ist.
Die Europäische Kommission strebt an, die Zahl der im Straßenverkehr Getöteten in der EU bis zum Jahr 2010 zu halbieren, unter anderem durch den Einsatz von fahrzeuggestützten Notrufsystemen. Ziel der vorliegenden Studie ist es, die spezifischen Rahmenbedingungen in Deutschland für die mögliche Einführung eines fahrzeuggestützten Notrufsystems zu analysieren und eine darauf abgestimmte Umsetzungsempfehlung zu erarbeiten. Methodik: Im Rahmen einer deskriptiven Analyse werden einerseits die deutschen Rahmenbedingungen bezüglich der Straßenverkehrsunfälle sowie der Strukturen und Leistungen des Rettungsdienstes erfasst. Andererseits werden Anforderungen an fahrzeuggestützte Notrufsysteme formuliert und die bestehenden Systemlösungen untersucht. Nach einer Klassifikation der möglichen Systemvarianten werden zwei ausgewählte Systemvarianten mit der Methodik der gesundheitsökonomischen Evaluation (Kosten-Wirksamkeits-Analyse) aus gesellschaftlicher Sicht analysiert. Zur qualitativen Bewertung wird eine Nutzwertanalyse mittels einer Befragung verschiedener Interessengruppen durchgeführt. Ergebnis: Je nach betrachteter Systemvariante und Ausgestaltungsform entstehen Kosten (inklusive Kosteneinsparungen) in Höhe von 1,5 bis 5,5 Milliarden Euro für die Gesellschaft. Werden diese Kosten auf die mit eCall ausgestatteten Fahrzeuge verteilt, ergeben sich rechnerisch pro Fahrzeug Kosten in Höhe von 47 bis 168 Euro. Diesen stehen im Betrachtungszeitraum von zehn Jahren 390 bis 438 gerettete Personen und eine Reduktion der Anzahl der Schwerverletzten um 11.879 bis 13.364 entgegen. Lediglich bei der kostengünstigsten Ausgestaltungsform des eCall-Systems im Fahrzeug als integrierte Lösung können die Kosteneinsparungen die Kosten für die Gesellschaft übersteigen. Unter monetär bewerteten Kosten- und Nutzengesichtspunkten aus gesamtgesellschaftlicher Perspektive kommt der organisatorischen Ausgestaltungsform des Systems (zentral/dezentral) keine Bedeutung zu. Im Rahmen der Nutzwertanalyse konnte bei den unterschiedlichen Interessengruppen keine eindeutige Präferenz für eine der Systemvarianten festgestellt werden. Die Vertreter der Automobilindustrie, der Medizin, der Politik/Gesellschaft, des Rettungsdienstes und der Wissenschaft bevorzugen die Systemvariante, bei der die Erstbearbeitung der Notrufe in den dezentral organisierten Rettungsleitstellen erfolgt. Die Vertreter der Automobil-Zulieferindustrie, der Serviceprovider und der Versicherungen ziehen die Systemvariante vor, die auf einer zentralen Erstbearbeitung der Notrufe beruht. Fazit: Die Einführung eines fahrzeuggestützten Notrufsystems in Deutschland ist mit hohen gesellschaftlichen Kosten verbunden, die in der Basisbetrachtung mit realistischen Annahmen deutlich über dem monetär bewerteten Nutzenpotenzial liegen. In der vorliegenden Evaluation wird deutlich, dass Kosteneinsparungen für die Gesellschaft auch bei optimistischen Nutzenannahmen in Bezug auf die Wirksamkeit zur Reduzierung der Getöteten und Schwerverletzten im Straßenverkehr nur bei den kostengünstigsten Varianten von fahrzeuggestützten Notrufsystemen realisierbar sind. Im Rahmen dieser Studie kann deshalb für die europaweite Einführung von fahrzeuggestützten Notrufsystemen nur die kostengünstigere Variante empfohlen werden, die in den Fahrzeugen bereits vorhandene Module (zum Beispiel GNSS-Systeme und das Mobilfunktelefon der Insassen) einbezieht. Eine freiwillige Markteinführung der Systeme würde dazu führen, dass eCall-Systeme insbesondere dann in Fahrzeugen integriert werden, wenn dafür geringe Mehrkosten anfallen oder wenn Risikogruppen ihren Nutzen besonders hoch einschätzen. Bei einem derartigen Implementierungsszenario würden damit die Kosten, die den Systemen zuzurechnen sind, sinken, da vorhandene Technik im Fahrzeug genutzt wird. Bei einer freiwilligen Einführung von fahrzeuggestützten Notrufsystemen in Deutschland wird letztlich der Nutzer über den Erfolg von eCall entscheiden.
At the beginning of the year 2000 the European Commission set the goal to halve the number of road deaths till the year 2010. The main focus are passenger car and lorry traffic. A significant reduction of the accident data could be reached in these groups. The advancement of active vehicle safety systems is an important issue of the programme. The safety of the motorcycle traffic has been disregarded till now. Since 1991 the number of killed motorcycle riders per year has been constant. The number of killed passenger car occupants has been more than halved in the same period. This is why initiatives are caused for the increase of the motorcycle safety. A great safety potential is expected for the Antilock Brake System (ABS). ABS for motorcycles is considered from the economic view in this study. A cost-benefit analysis shall clarify whether the economic benefit of ABS for motorcycles is greater than the consumed resources. Moreover, a sensitivity analysis will determine the maximal justifiable consumption in resource for which ABS is worthwhile. After the sensitivity analysis is done a break-even analysis will determine the market price respectively the annual mileage from which on ABS is worthwhile on user level. For this the fair end consumer market price is calculated which the user is ready to pay. For the considered market prices the annual mileage is determined from which on ABS is worthwhile for the user. The considered time horizon for this analysis are the years 2015 and 2020. For each of these years the accident data is forecasted. At this, it is assumed that the frequency of having an accident per million registered motorcycles decreases based on the present trend. Thus, riding motorcycle gets safer. Hence, the accident data in the years 2015 and 2020 is lower than the accident data today. The cost-benefit analysis is done for each year for four scenarios. Two scenarios handle the market penetration. The first one is the trend scenario, the second one is the mandatory equipment from the year 2010 on. The other scenarios describe the effectiveness of ABS. The effectiveness rates are determined by a literature review. The only potential which can be considered due to the available data is the potential due to an avoiding of the downfall just before the real accident happens. According to this the number of accidents will decrease by 2.4 %. The number of fatalities will decrease by 12.1 %. The number of severe injuries decreases by 11.7 %. However, the number of slight injuries increases by 2.1 %. The mentioned effectiveness rates are valid for the scenarios with the high effectiveness. Even these figures underestimate the actual effectiveness because there are only considered the avoided accidents with downfall. The necessary consumption in resources depends on the produced volume. The more ABS systems are produced, the lower are the costs per system. This is due to realised effects of scale and effects out of learning curves. The system costs depend on the penetration rate. In the trend scenario the system costs for ABS are 120 Euro for the year 2015 respectively 105 Euro for the year 2020. In the mandatory scenario the system costs are 115 Euro for the year 2015 respectively 100 Euro for the year 2020. The benefit-cost ratios are all over the critical barrier of 1.0. Thus, ABS is worthwhile on economic level. In the scenarios with high effectiveness the benefit-cost ratios range between 4.6 and 4.9. Thus, the values are even above the barrier of 3.0. The result of the break-even analysis is that ABS is worthwhile on user level. The considered market prices are 400 Euro in 2015 and 300 Euro in 2020. They are clearly below the determined fair end consumer market prices. The fair end consumer price for the year 2015 is 701 Euro respectively 622 Euro for the year 2020. Thus, ABS is worthwhile for motorcycle riders with an annual mileage higher than 2,200 km (year 2015) respectively 1,900 km (year 2020). The annual mileage of a motorcycle rider is 3,900 km on average. Thus, ABS is worthwhile for most of the motorcycle riders. The mentioned results are valid for the high effectiveness scenarios.