Filtern
Erscheinungsjahr
Dokumenttyp
- Konferenzveröffentlichung (71)
- Buch (Monographie) (48)
- Wissenschaftlicher Artikel (5)
- Bericht (1)
- Arbeitspapier (1)
Schlagworte
- Analyse (math) (126) (entfernen)
Institut
Die Auswertung von Straßenverkehrsunfalldaten basiert auf den im Jahre 1982 geschehenen innerörtlichen Unfällen mit Personenschaden, wobei erstmalig die Zusammenhänge zwischen Ortsgröße sowie siedlungsstruktureller Lage und den Ausprägungen des Unfallgeschehens analysiert wurden. Da es an Daten, die das Ausmaß der Verkehrsbeteiligung hinreichend beschreiben, mangelt, können weniger Aussagen über das Risiko im Verkehr getroffen werden, als solche über Häufigkeit und Art des Unfallgeschehens. Es wurden folgende Parameter berücksichtigt: Straßenklasse, Unfallort, Kreuzungen und Einmündungen, Unfallart, Unfalltyp, Alleinunfälle, Nässe und Glätte, Unfallursache und Verkehrsbeteiligungsart. Es zeichnet sich eine systematische Verschiebung in der Unfalltypologie ab, wobei sehr häufig eine deutliche, monotone Zu- oder Abnahme der betrachteten Kennwerte mit der Ortsgröße erfolgt, während andererseits die in die Betrachtung einbezogene siedlungsstrukturelle Lage nur einen geringen Erklärungsbeitrag zu Strukturunterschieden im Unfallgeschehen leistet. Es wird aufgezeigt, dass die Bemühungen, im Rahmen der Verkehrssicherheitsarbeit der Gemeinden Vergleichsmaßstäbe zur Einordnung und Beurteilung des eigenen Sicherheitsniveaus durch Heranziehung von Daten des Bundeslandes oder des gesamten Bundesgebietes zu gewinnen, weniger ratsam als bislang angenommen sind.
Die exemplarischen empirischen Untersuchungen sowie die Befragung und die Expertendiskussion führen zu folgenden Schlussfolgerungen: - Eine EDV-Unterstützung bei der Festlegung und Behandlung von innerörtlichen Unfallstellen wird dringend gewünscht. - Die Vielschichtigkeit des Problems sowie die Notwendigkeit der Flexibilität in der praktischen Anwendung ermöglichen es aber nicht, einheitliche Schwellenwerte für die automatische Festlegung von Unfallstellen vorzugeben. Dagegen lässt sich eine Reihe von Kriterien und Werten angeben, die bei einer automatischen Vorauswahl der näher zu untersuchenden Stellen hilfreich sind. - Ein wesentlicher Faktor für die stärkere Nutzung der EDV bei der Untersuchung des innerörtlichen Unfallgeschehens ist in der Unterstützung bei korrespondierenden Aufgaben und Fragestellungen (Übersichtsauswertungen, Beantwortung von Anfragen etc.) zu sehen. - Neben den eigentlichen Unfalldaten besteht ein erheblicher Bedarf an anderen Informationen aus dem Bereich des Straßenverkehrs. Dieser Informationsbedarf gilt auch in umgekehrter Richtung. Diese Anforderungen lassen sich nur im Rahmen eines umfassenderen Informationskonzepts beziehungsweise in einem Informationssystem erfüllen, das die direkte dezentrale Nutzung bei den entsprechenden Polizeidienststellen ermöglicht.
In Europe, in situ measurements of sound reflection and airborne sound insulation of noise barriers are usually done according to CEN/TS 1793-5. This method has been improved substantially during the EU funded QUIESST collaborative project. Within the same framework, an inter-laboratory test has been carried out to assess the repeatability and reproducibility of the newly developed method when applied to real-life samples, including the effect of outdoor weather variability and sample ageing. This article presents the statistical analysis of the inter-laboratory test results, and the values of the repeatability and the reproducibility, both in one-third octave bands and for the single-number ratings. The estimated reproducibility values can be used as the extended measure of uncertainty at the 95% credibility level in compliance with the ISO GUM. The repeatability and reproducibility values associated with airborne sound insulation are also compared with the corresponding values for laboratory measurements in building acoustics and an acceptable agreement is found.
At the end of each year, the German Federal Highway Research Institute (BASt) publishes the road safety balance of the closing year. They describe the development of accident and casualty numbers disaggregated by road user types, age groups, type of road and the consequences of the accidents. However, at the time of publishing, these series are only available for the first eight or nine months of the year. To make the balance for the whole year, the last three or four months are forecasted. The objective of this study was to improve the accuracy of these forecasts through structural time-series models that include effects of meteorological conditions. The results show that, compared to the earlier heuristic approach, root mean squared errors are reduced by up to 55% and only two out of the 27 different data series yield a modest rise of prediction errors. With the exception of four data series, prediction accuracies also clearly improve incorporating meteorological data in the analysis. We conclude that our approach provides a valid alternative to provide input to policy makers in Germany.
Bedingt durch ihre Definition - mindestens 24-stündiger Klinikaufenthalt - umfasst die Kategorie der Schwerverletzten in der amtlichen Verkehrsunfallstatistik eine große Breite tatsächlicher Verletzungsschweregrade. Durch das hohe persönliche Leid sowie die bedeutsamen volkswirtschaftlichen Kosten sind innerhalb dieser Gruppe die Schwerstverletzten von besonderem Interesse. Es werden drei Studien der Bundesanstalt für Straßenwesen (BASt) vorgestellt, in denen auf Grundlage verschiedener Datenquellen Verletzungsmuster und Verletzungsschwere in Zusammenhang mit Parametern des Unfallgeschehens gebracht wurden. Zusammengefasst zeigt sich, dass (a) die Zahl der Schwerstverletzten sich in den letzten Jahren nicht in gleichem Maße reduziert hat, wie die Zahlen Schwerverletzter und Getöteter; (b) sich über verschiedene Datenquellen (GIDAS, TraumaRegister DGU, Rettungsdienst, Polizei) ähnliche Verletzungsmuster in Abhängigkeit der Verkehrsteilnahme zeigen; (c) durch die Verbindung von medizinischen Daten des TraumaRegisters mit Daten der Polizei gute Voraussetzungen für eine umfangreiche Erfassung Schwerstverletzter in Deutschland geschaffen werden könnten.
Zur Ermittlung einer Mehr- oder Minderbeanspruchung des Straßenoberbaus durch Lang-Lkw wurde im Rahmen der zweiten Untersuchungsstufe zu dieser Problematik eine Stichprobe von 23.639 Fahrten von Lang-Lkw im Direktverkehr und 463 Fahrten im kombinierten Verkehr analysiert. Die durchschnittliche Fahrzeuggesamtmasse der Lang-Lkw betrug 33,2 t. Ca. 6,5 % der Lang-Lkw fuhren überladen, was im Vergleich zum konventionellen Schwerverkehr auf Bundesautobahnen mit ca. 20 % einen relativ niedrigen Anteil darstellt. Im Vergleich zur ersten Untersuchungsstufe wurde die Tendenz zur Reduzierung der Achsanzahl von Lang-Lkw festgestellt. Die Fahrt eines Lang-Lkw ersetzt ca. 1,5 Fahrten eines äquivalenten konventionellen Lkw. Hinsichtlich der Dimensionierungsparameter nach RStO 12 liefern Lang-Lkw marginal bessere Werte als äquivalente konventionelle Lkw, so dass bei Substitution eines Teils konventioneller Lkw durch Lang-Lkw in der Regel keine Änderung der Belastungsklasse eintreten würde. Das Dimensionierungsverfahren nach RDO Asphalt 09 ergibt bei teilweisem Einsatz von Lang-Lkw innerhalb des Gesamtkollektivs Schwerverkehr auf Bundesautobahnen eine marginale Verlängerung der Regelnutzungsdauer von 30 Jahren um ca. 2 % auf ca. 30,5 Jahre. Die Ergebnisse der Untersuchung bestätigen grundsätzlich die Resultate der ersten Untersuchung. Der Einsatz von Lang-Lkw bedingt unter Einhaltung der im Feldversuch definierten fahrzeugtechnischen Vorgaben und zulässigen Grenzwerte für Fahrzeuggesamtgewichte und Achslasten keine Mehrbeanspruchung des Oberbaus von Straßen. Die rechnerisch ermittelte Minderbeanspruchung des Oberbaus im Vergleich zu konventionellen Lkw hat nur marginale Bedeutung und würde sich somit in der Praxis kaum spürbar auf die Nutzungsdauer der Straßen auswirken. Bei weiterer Reduzierung der mittleren Achsanzahl von Lang-Lkw würde sich die Beanspruchung des Straßenoberbaus durch Lang-Lkw jedoch signifikant erhöhen.
Für das Forschungsvorhaben wurden Performance-Kennwerte in den Phasen der Asphaltmischgutkonzeption, Asphaltmischgutproduktion und nach dem Asphalteinbau an 21 Baumaßnahmen für die Asphaltdeck-, -binder- und -tragschicht systematisch erfasst und ausgewertet. Als Performance-Kennwerte dienten die Ergebnisse aus den Prüfungen zur Steifigkeit, zum Widerstand gegen Kälterissbildung, zum Ermüdungs- und Verformungs-widerstand sowie zur Griffigkeitsentwicklung. Die Untersuchungen lieferten wichtige Erkenntnisse und Tendenzen bei einzelnen Performance-Kennwerten, die bereits jetzt für zwei methodische Ansätze zur Festlegung künftiger vertragsrelevanter Anforderungen genutzt werden konnten: Einerseits wurde ein Vorschlag für eine spezifische Kategorisierung von Performance-Kennwerten innerhalb der europäischen Normung aufgezeigt, andererseits konnte mit Hilfe multipler linearer Regressionsanalysen ein möglicher Weg zur Abschätzung von Performance-Kenngrößen der fertigen Schicht aus der Erstprüfung aufgezeigt werden, sodass Anforderungswerte vorab definiert werden können. Zudem zeigte sich, dass, auch wenn im Wesentlichen die Ergebnisse der konventionellen Asphaltkontrollprüfungen die Anforderungen der ZTV Asphalt erfüllen, es nicht sichergestellt ist, dass Nutzungsdauern von mindestens 30 Jahren erreicht werden können. Dies resultiert im Wesentlichen aus den Unterschieden der Performance-Kenngrößen der drei Phasen, vor allem der Ermüdungsversuche. Deshalb wurden für die Modifikation des Sicherheitskonzeptes für die rechnerische Dimensionierung zwei Ansätze vorgestellt. Es erscheint aber zwingend erforderlich, dass durch weitere Untersuchungen die erstellte Datenbank ergänzt wird. Zudem sollten die im Projekt untersuchten Strecken einer weiteren Beobachtung unterzogen werden, um den Prozess der Alterung erfassen zu können. Damit kann auch eine Validierung des Dimensionierungsverfahrens erfolgen.
Untersuchungsgegenstand des Forschungsprojektes war die Überprüfung der aktuellen Grenzwertkriterien in Deutschland zur Identifizierung von Unfallhäufungen im Straßennetz. Nach Analyse des IST-Zustandes und der Bestimmung von Defiziten wurden alternative Grenzwertkriterien mit dem Ziel eines optimierten Einsatzes von Ressourcen im Bereich der Örtlichen Unfalluntersuchung überprüft. Auf Grundlage dieser Erkenntnisse erfolgte die Ableitung von Empfehlungen für zukünftige Grenzwertkriterien. Insgesamt wurden verschiedene Grenzwertkriterien getrennt für die Ortslagen innerorts, außerorts (ohne BAB) und Bundesautobahnen mittels einer umfangreichen Unfalldatenauswertung untersucht. Als Untersuchungsgebiete dienten außerorts Bereiche von Bundesländern (Sachsen) oder ganze Bundesländer (Bayern, Rheinland-Pfalz) sowie innerorts Städte verschiedener Größe (Großstädte über 100.000 E, Mittelstädte mit 30.000 bis 100.000 E sowie Durchfahrten von Ortschaften unter 30.000 E) aus vier Bundesländern. Die Untersuchungen lassen sich in folgenden Ergebnissen zusammenfassen:- Bei der Bestimmung der unfallauffälligen Stellen (UAS) mit gleichartigen Unfällen werden ortslagenunabhängig nahezu alle UAS durch die Gleichartigkeit des Unfalltyps identifiziert. Durch die Berücksichtigung von Unfallumständen wie z.B. die Verkehrsbeteiligung werden kaum zusätzliche Stellen erkannt. - Bei der parallelen Betrachtung der drei aktuellen Auswertungszeiträume (1-Jahreskarte, 3-Jahreskarte (P) und 3-Jahreskarte (SP)) wurde festgestellt, dass ein Großteil der UAS, die in der 3-Jahreskarte (SP) auffällig sind, auch in der 3-Jahreskarte (P) als auffällig identifiziert werden. - Die zeitliche Stabilität, d.h. das wiederholte Auftreten eines unfallauffälligen Bereiches in zwei oder mehr aufeinanderfolgenden Betrachtungszeiträumen, erreicht gemessen am Anteil an allen unfallauffälligen Bereichen in einem Ausgangszeitraum weder bei den UAS noch bei den unfallauffälligen Linien (UAL) eine zufriedenstellende Größenordnung. - Aus den unterschiedlichen Kriterien für die Optimierung von Grenzwerten nach einem ausgewogenen Verhältnis von Aufwand und Nutzen resultieren zum Teil unterschiedliche Ergebnisse. Bei der Empfehlung neuer Grenzwerte wurde darauf geachtet, dass bei Anwendung des Grenzwertes mindestens 10% des Gesamtunfallgeschehens im jeweiligen Betrachtungszeitraum bearbeitet werden. Die Empfehlungen beinhalten für die Identifizierung von unauffälligen Bereichen insbesondere Vorschläge zu geeigneten Betrachtungszeiträumen, räumlichen Abgrenzungen von unfallauffälligen Bereichen sowie der Angabe optimierter Grenzwerte differenziert nach Ortslage und Betrachtungszeitraum.
Europe has benefited from a decreasing number of road traffic fatalities. However, the proportion of older road users increases steadily. In an ageing society, the SENIORS project aims to improve the safe mobility of older road users by determining appropriate requirements towards passive vehicle safety systems. Therefore, the characteristics of road traffic crashes involving the elderly people need to be understood. This paper focuses on car occupants and pedestrians or cyclists in crashes with modern passenger cars. Ten crash databases and four hospital statistics from Europe have been analysed to answer the questions on which body regions are most frequently and severely injured in the elderly, and specific injuries sustained by always comparing older (65 years and above) with midâ€aged road users (25â€64 years). It was found that the body region thorax is of particularly high importance for the older car occupant with injury severities of AIS2 or AIS3+, where as the lower extremities, head and the thorax need to be considered for older pedestrians and cyclists. Further, injury risk functions were provided. The hospital data analysis showed less difference between the age groups. The linkage between crash and hospital data could only be made on a general level as their inclusion criteria were quite different.
Advancing active safety towards the protection of vulnerable road users: the PROSPECT project
(2017)
Accidents involving Vulnerable Road Users (VRU) are still a very significant issue for road safety. According to the World Health Organisation, pedestrian and cyclist deaths account for more than 25% of all road traffic deaths worldwide. Autonomous Emergency Braking Systems have the potential to improve safety for these VRU groups. The PROSPECT project (Proactive Safety for Pedestrians and Cyclists) aims to significantly improve the effectiveness of active VRU safety systems compared to those currently on the market by expanding the scope of scenarios addressed by the systems and improving the overall system performance. The project pursues an integrated approach: Newest available accident data combined with naturalistic observations and HMI guidelines represent key inputs for the system specifications, which form the basis for the system development. For system development, two main aspects are considered: advanced sensor processing with situation analysis, and intervention strategies including braking and steering. All these concepts are implemented in several vehicle prototypes. Special emphasis is put on balancing system performance in critical scenarios and avoiding undesired system activations. For system validation, testing in realistic scenarios will be done. Results will allow the performance assessment of the developed concepts and a cost-benefit analysis. The findings within the PROSPECT project will contribute to the generation of state -of-the-art knowledge, technical innovations, assessment methodologies and tools for advancing Advanced Driver Assistance Systems towards the protection of VRUs. The introduction of a new generation safety system in the market will enhance VRU road safety in 2020-2025, contributing to the "Vision Zero" objective of no fatalities or serious injuries in road traffic set out in the Transport White Paper. Furthermore, the test methodologies and tools developed within the project shall be considered for the New Car Assessment Programme (Euro NCAP) future roadmaps, supporting the European Commission goal of halving the road toll in the 2011-2020 timeframe.
The presence and performance of Advanced Driver Assistance Systems (ADAS) has increased over last years. Systems available on the market address also conflicts with vulnerable road users (VRUs) such as pedestrians and cyclists. Within the European project PROSPECT (Horizon2020, funded by the EC) improved VRU ADAS systems are developed and tested. However, before determining systems" properties and starting testing, an up-to-date analysis of VRU crashes was needed in order to derive the most important Use Cases (detailed crash descriptions) the systems should address. Besides the identified Accident Scenarios (basic crash descriptions), this paper describes in short the method of deriving the Use Cases for car-to-cyclist crashes. Method Crashes involving one passenger car and one cyclist were investigated in several European crash databases looking for all injury severity levels (slight, severe and fatal). These data sources included European statistics from CARE, data on national level from Germany, Sweden and Hungary as well as detailed accident information from these three countries using GIDAS, the Volvo Cars Cyclist Accident database and Hungarian in-depth accident data, respectively. The most frequent accident scenarios were studied and Use Cases were derived considering the key aspects of these crash situations (e.g., view orientation of the cyclist and the car driver- manoeuvre intention) and thus, form an appropriate basis for the development of Test Scenarios. Results Latest information on car-to-cyclist crashes in Europe was compiled including details on the related crash configurations, driving directions, outcome in terms of injury severity, accident location, other environmental aspects and driver responsibilities. The majority of car-to-cyclist crashes occurred during daylight and in clear weather conditions. Car-to-cyclist crashes in which the vehicle was traveling straight and the cyclist is moving in line with the traffic were found to result in the greatest number of fatalities. Considering also slightly and seriously injured cyclists led to a different order of crash patterns according to the three considered European countries. Finally the paper introduced the Use Cases derived from the crash data analysis. A total of 29 Use Cases were derived considering the group of seriously or fatally injured cyclists and 35 Use Cases were derived considering the group of slightly, seriously or fatally injured cyclists. The highest ranked Use Case describes the collision between a car turning to the nearside and a cyclist riding on a bicycle lane against the usual driving direction. A unified European dataset on car-to-cyclist crash scenarios is not available as the data available in CARE is limited, hence national datasets had to be used for the study and further work will be required to extrapolate the results to a European level. Due to the large number of Use Cases, the paper shows only highest ranked ones.
Das Sicherheitsaudit stellt einen wesentlichen Bestandteil des Sicherheitsmanagements von Straßen in der Planungsphase dar. Ein aktueller systematischer Überblick über die Auditpraxis in den Ländern sowie über die Verbreitung in Kommunen lag jedoch bisher nicht vor. Ziel war es daher, zunächst Wissenslücken bezüglich der tatsächlichen Anwendung und der organisatorischen Verankerung des Sicherheitsaudits zu schließen. Hierfür erfolgten zunächst eine Recherche zur Anwendung von Sicherheitsaudits auf Länder- und kommunaler Ebene sowie eine Erhebung zu durchgeführten Audits. In diesem Zusammenhang erfolgte auch ein Erfahrungsaustausch mit Auditoren von Straßenbauverwaltungen der Länder sowie mit Auditoren von Stadtverwaltungen. Darüber hinaus wurden jeweils 200 Auditberichte zu außer- und innerörtlichen Maßnahmen einschließlich der zugehörigen Stellungnahmen ausgewertet. Darauf aufbauend erfolgte die detaillierte Untersuchung ausgewählter auditierter Maßnahmen, die bereits realisiert und unter Verkehr waren und für die ein Unfallgeschehen von mindestens drei Jahren nach Verkehrsfreigabe vorlag. Während die Gespräche zum Erfahrungsaustausch weitestgehend übereinstimmende Aussagen im Hinblick auf die Auditierung von außer- und innerörtlichen Maßnahmen erbracht haben, haben die Auswertungen der jeweils 200 Audits wie auch die Detailauswertung der Audits von Außerorts- und Innerortsstraßen zu unterschiedlichen Erkenntnissen geführt. Abschließend wurden Empfehlungen zur Weiterentwicklung der Auditpraxis in Deutschland sowie zur Übernahme in die Fortschreibung der ESAS abgeleitet. Der wesentliche Baustein im Zusammenhang mit der Fortschreibung der ESAS war die Erarbeitung von Defizitlisten, die zukünftig in elektronischer Form zur Verfügung stehen sollen und anhand derer ein Audit auf Vollständigkeit überprüft werden kann. Ferner sollen sie für eine Dokumentation und Auswertung der Auditergebnisse genutzt werden können.
Die Typisierung von Verkehrsstärkeganglinien dient dazu, die Variabilität des Verkehrsaufkommens in ihren wesentlichen Ausprägungen zu verdeutlichen. Damit wird die Vergleichbarkeit von Ganglinien sowohl in der räumlichen wie auch in der zeitlichen Dimension erleichtert oder sogar erst ermöglicht. Durch die Betrachtung normierter Ganglinien wird die Verwendbarkeit der Ergebnisse über mehrere Jahre begünstigt, da erfahrungsgemäß die Verkehrsanteile für längere Zeiträume unter ceteris-paribus-Bedingungen keinen großen Veränderungen unterliegen. So sind z. B. Vergleiche für Regionen oder Streckenzuege möglich, oder es können bei Betrachtungen über mehrere Jahre wesentliche Veränderungen festgestellt werden, die etwa durch Infrastrukturmaßnahmen oder durch Konjunkturschwankungen hervorgerufen sein mögen. Somit wird den planerischen und politischen Institutionen eine Entscheidungshilfe angeboten. Selbstverständlich können je nach Aufgabenstellung auch Verkehrsstärkenganglinien für andere als die hier untersuchten Zeitbereiche mit den gleichen Methoden klassifiziert und somit typisiert werden, wie z. B. Ganglinien in bestimmten von Feiertags- und Ferienverkehr beeinflussten Zeitbereichen.
Typisierung von Verkehrsstärkeganglinien des Schwerverkehrs durch clusteranalytische Verfahren
(1983)
Verstärkeganglinien sind Kenngrößen, die Aussagen über die zeitliche Veränderung des Verkehrs beinhalten. Einleitend wird auf die Methodik und die statistischen Grundlagen der Ermittlung und Darstellung von Verkehrsganglinien eingegangen. Die typisierten Tages-, Wochen-, Jahresganglinien des Schwerverkehrs werden dargestellt.
Die Bundesanstalt für Straßenwesen (BASt) bringt zum Ende jeden Jahres eine Prognose der Unfall- und Verunglücktenzahlen des noch laufenden Jahres heraus, um so über die Entwicklung der Verkehrssicherheit in Deutschland Bilanz ziehen zu können. Dabei wird das Unfallgeschehen nach dem Schweregrad der Konsequenzen, der Ortslage sowie Alter und Art der Verkehrsbeteiligung der Verunglückten in 27 Zeitreihen unterteilt. Zu diesem Zeitpunkt sind die Daten lediglich für die ersten acht oder neun Monate erhältlich. Um Bilanz zu ziehen, werden die Anzahlen der letzten drei oder vier Monate prognostiziert. Gesamtziel des hier beschriebenen Forschungsvorhabens ist die Optimierung der jährlichen Unfallprognosen durch Anwendung von strukturellen Zeitreihenmodellen, bei denen die Vorhersagen aus dem Trend der vorliegenden Monate, und der Dynamik der vorhergehenden Jahre abgeleitet werden. Um dem Einfluss der Witterungsverhältnisse Rechnung zu tragen, werden dabei meteorologische Variablen in das Vorhersagemodell aufgenommen. Um die Modelle zu testen, werden die endgültigen Daten der letzten 15 Jahre jeweils aus den vorläufigen Daten der ersten Monate vorhergesagt und mit den tatsächlich beobachteten endgültigen Unfall- und Verunglücktenzahlen verglichen. Die Resultate zeigen, dass im Vergleich zu den bisherigen Vorhersagen mithilfe der hier vorgestellten Modelle die Vorhersagen für 25 der 27 Reihen präziser werden. Lediglich zwei Reihen zeigen einen leichten Anstieg des Vorhersagefehlers. Beim Vergleich von Modellen mit und ohne meteorologischen Variablen zeigt sich, dass 23 der 27 Reihen besser vorhergesagt werden können, wenn man das Wetter berücksichtigt. Neben der verbesserten Vorhersage ermöglicht die Aufnahme der Wettervariablen auch eine Einschätzung, wie groß der Einfluss der Witterungsgegebenheiten auf das Unfallgeschehen ist. Es zeigt sich also, dass die Anwendung von strukturellen Zeitreihenmodellen und die Berücksichtigung von meteorologischen Variablen zu einer deutlichen Verbesserung der Vorhersagegenauigkeit führen. Die Verbesserung der Vorhersagen durch die Aufnahme von Wettervariablen bestätigt nochmals den Einfluss der Witterungsumstände auf das Unfallgeschehen.
Durch die langjährige Teilung Deutschlands haben sich die Verkehrssysteme in Ost und West weitgehend unabhängig voneinander entwickelt. So sind die Ausgangsbedingungen für die Verkehrsteilnehmer - andere Fahrzeuge, Fahrerlaubnisse und Fahrerfahrungen - sehr unterschiedlich. Ein Beispiel hierfür ist die Bedeutung von Motorrädern in Ost und West: Alltägliches Transportmittel hier, Mittel zur Freizeitgestaltung dort. Unterschiede zeigen sich ebenfalls bei der durchschnittlichen Gesamtfahrleistung eines Autofahrers, die er seit Fahrerlaubniserwerb erbracht hat, sie liegt im Westen bei 194.000 km, im Osten bei etwa 127.000 km. Auch die Einstellungen und Meinungen zum Straßenverkehr und zur Straßenverkehrssicherheit weichen teilweise voneinander ab: Bezogen auf westliche Autobahnen befürworten beispielsweise 56 Prozent der Bevölkerung im Westen gegenüber 73 Prozent im Osten ein generelles Tempolimit. Die Verkehrsteilnehmer im Osten räumen der polizeilichen Überwachung einen größeren Stellenwert ein, plädieren für niedrigere Promillegrenzen und sehen weit stärker als die Verkehrsteilnehmer im Westen im intensivierten Straßenbau einen Garanten für mehr Verkehrssicherheit. Der vorliegende Bericht liefert aufgrund einer repräsentativen Befragung einen umfassenden Überblick über die Verkehrsbeteiligung, die Einstellungen und Meinungen sowie die Verhaltensweisen der Verkehrsteilnehmer in Ost und West. Insgesamt wurden 2.000 Personen in den alten und 2.500 Personen in den neuen Bundesländern befragt. Vorhandene Informationen über die Verkehrsteilnehmer in Ost und West werden durch die Ergebnisse dieses Berichtes teils bestätigt, teils differenziert und in vielerlei Hinsicht erweitert.
Causation of traffic accidents with children from the perspective of all involved participants
(2017)
In the year 2014 about 2,800 children between zero and 14 years got injured due to traffic accidents in Austria. More than 50% were taking part in traffic as active road users like cyclists or pedestrians. Within this study 46 real world traffic accidents between vehicles and children as pedestrians were analysed. In 39 cases, car drivers hit the crossing children. In the other cases, the collision opponents were busses, trucks or motorcycles. Most of the children got hit while crossing a road at urban sites. By analysing the traffic accidents from the perspectives of all involved participants, vehicle drivers and injured children, it is possible to identify factors for each participant, which led to the accident and factors that contributed the accident. The main task is to find patterns in the behaviour of crash victims (children and driver) before the collision. One important fact is that in more than 50% of the analysed cases sight obstructions were an important contributing factor for both, the driver and the child. From drivers view situations in which the child moved unexpected into the driven road lane were often found. For the injured child, factors like: no attention to the road traffic or no sufficient traffic observation were found to be relevant. Further it- possible to sensitise children and adults to possible source of critical traffic situations according to the findings of this study.
For more than a decade, ADAC accident researchers have analysed road accidents with severe injuries, recording some 20,000 accidents. An important task in accident research is to determine the causative factors of road accidents. Apart from vehicle engineering and human factors, accident research also focuses on infrastructural and environmental aspects. To find out what accident scenarios are the most common in ADAC accident research and what driver assistance systems can prevent them, our first task was to conduct a detailed accident analysis. Using CarMaker, we performed a realistic simulation of accident scenarios, including crashes, with varying parameters. To begin with, we made an initial selection of driver assistance systems in order to determine those with the greatest accident prevention potential. One important finding of this study is that the safety potential of the individual driver assistance systems can actually be examined. It also turned out that active safety offers even much more potential for development and innovation than passive safety. At the same time, testing becomes more demanding, too, as new systems keep entering the market, many of them differing in functional details. ADAC will continue to test all driver assistance systems as realistically as possible so as to be able to provide advice to car buyers. Therefore, it will be essential to develop and improve test conditions and criteria.
The proportion of older road users is increasing because of demographic change (in the group 65+ from current 18% to about 24% by 2030). The mobility needs of people 65+ often differ from those of younger people. Seniors (65+) are already more involved in fatal accidents than younger road users. According to the age development, the senior share of road deaths in the EU of today is increasing nearly one-fifth to one-third. From the in-depth analysis of accidents generic simulation models were developed. Attention has been paid both to psycho-physical characteristics as well as on the social and physical environment and their specifics in conjunction with seniors. By simulating the defined scenarios and varying the defined relevant parameters, accident influencing factors were examined as a basis for avoidance. In addition, the parameters were varied to show the influence from the vehicle, the pedestrian and the infrastructure to avoid the accident or to characterize the conditions for which the accident is inevitable.
In this study, the mean profile depth (MPD) that expresses roughness of road pavements was calculated using the road survey equipment vehicle and the calculated MPD was compared with the real number of traffic accidents. The analysis method used in this study was to classify the appropriate clustering in relation to traffic accidents using the K-means clustering and to compare this with the presence of traffic accidents via the MPDs to derive the result. K-means clustering was used in the analysis method and four clusters were found using the clustering analysis results. The center of each cluster was 0.627, 0.850, 1.118, and 1.237, respectively. The result of this study is expected to be utilized as foundational research in the traffic safety area.
Powered Two Wheeler (Motorcycle) crashes are overrepresented in EU, England, and United States casualty statistics for both fatal and serious injuries. While regional geographic differences are evident for motorcycle size, type, and engine displacement, the casualty statistics consistently indicate significantly higher injury rates for all motorcycle riders when compared to car occupants. Accident analysis and reconstruction of these motorcycle crashes is a necessary process to gain further understanding of potential injury mitigation strategies. This paper focuses on the analysis of the rider post impact trajectory in the immediate moments following a crash. The rider and motorcycle, while loosely coupled by seating position leading up to a crash, quickly decouple as the crash forces develop. As a result, the rider moves relative to the motorcycle and relative to the collision partner. This movement, or trajectory, is primarily influenced by the type and configuration of the impact, the type and configuration of the motorcycle and collision partner, and the speeds involved. Understanding the rider's post impact trajectory will assist in the development of injury mitigation strategies. Both the free flight trajectory of the rider and the rider's trajectory as influenced by interaction with the motorcycle and collision partner are examined. Rider trajectories in full scale crash testing and real world motorcycle crashes are both studied and presented. The resulting physical evidence that can be observed by an accident analyst is discussed. The application of projectile motion physics is analyzed and the necessary input parameters, such as initial launch angle, are studied. This study will assist in understanding the post-impact dynamics of a motorcyclist, and will provide useful information to analysts evaluating real world crashes.
Cyclists are more likely to be injured in fatal crashes than motorised vehicles. To gain detailed and precise behavioural data of road users, i.e. trajectories, a measuring campaign was conducted. Therefore, a black-spot for accidents with cyclists in Berlin, Germany was selected. The traffic has been detected by a fully automated traffic video analysis system continuously for twelve hours. The video surveillance system is capable of automatically extracting trajectories, classifying road user types and precise determining and positioning of conflicts and accidents. Additionally, pre-conflict and pre-accident situations could be analysed to provide further in-depth understanding of accident causation. The evaluation of the measuring campaign comprised the investigation of traffic parameters, e.g. traffic flow, as well as traffic-safety related parameters based on Surrogate Safety Measures (SSM). Furthermore, the spatial and temporal distributions of conflicts involving cyclists were determined. As a result, three possible conflict clusters could be identified, of which one cluster could be confirmed by detailed video analysis, showing conflicts caused by right turning vehicles.
Car occupants have a high level of mortality in road accidents, since passenger cars are the prevalent mode of transport. In 2013, car occupant fatalities accounted for 45% of all road accident fatalities in the EU. The objective of this research is the analysis of basic road safety parameters related to car occupants in the European countries over a period of 10 years (2004-2013), through the exploitation of the EU CARE database with disaggregate data on road accidents. Data from the EU Injury Database for the period 2005 - 2008 are used to identify injury patterns, and additional insight into accident causation for car occupants is offered through the use of in-depth accident data from the EC SafetyNet project Accident Causation System (SNACS). The results of the analysis allow for a better understanding of the car occupants' safety situation in Europe, thus providing useful support to decision makers working for the improvement of road safety level in Europe.
In most of developed countries, the progress made in passive safety during the last three decades allowed to drastically reduce the number of killed and severely injured especially for occupants of passenger cars. This reduction is mainly observed for frontal impacts for which the AIS3+ injuries has been reduced about 52% for drivers and 38% for front passengers. The stiffening of the cars' structure coupled with the generalization of airbags and the improvement of the seatbelt restraint (load limiter, pretension, etc.) allowed to protect vital body regions such as head, neck and thorax. However, the abdomen did not take advantage with so much success of this progress. The objective of this study is to draw up an inventory on the abdominal injuries of the belted car occupants involved in frontal impact, to present adapted counter-measures and to assess their potential effectiveness. In the first part the stakes corresponding to the abdominal injuries will be defined according to types of impact, seat location, occupants' age and type of injured organs. Then, we shall focus on the abdominal injury risk curves for adults involved in frontal impact and on the comparisons of the average risks according to the seat location. In the second part we will list counter-measures and we shall calculate their effectiveness. The method of case control will be used in order to estimate odds ratio, comparing two samples, given by occupants having or not having the studied safety system. For this study, two type of data sources are used: national road injured accident census and retrospective in-depth accident data collection. Abdominal injuries are mainly observed in frontal impact (52%). Fatal or severe abdominal occupant- injuries are observed at least in 27% of cases, ranking this body region as the most injured just after the thorax (51%). In spite of a twice lower occupation rate in the back seats compared to the front seats, the number of persons sustaining abdominal injuries at the rear place is higher than in the front place. In recent cars, the risk of having a serious or fatal abdominal injury in a frontal impact is 1.6% for the driver, 3.6% for the front passenger and 6.3% for the rear occupants. The most frequently hurt organs are the small intestine (17%), the spleen (16%) and the liver (13%). The most common countermeasures have a good efficiency in the reduction of the abdominal injuries for the adults: the stiffness of the structure of the seats allows decreasing the abdominal injury risk from 54% (driver) to 60% (front occupant), the seatbelt pretensioners decrease also this risk from 90% (driver) to 83% (front passenger).
Still correlated with high mortality rates in traffic accidents traumatic aortic ruptures were frequently detected in unprotected car occupants in the early years. This biomechanical analysis investigates the different kinds of injury mechanisms leading to traumatic aortic injuries in todays traffic accidents and how the way of traffic participation affects the frequency of those injuries over the years. Based on GIDAS reported traffic accidents from 1973 to 2014 are analyzed. Results show that traumatic aortic injuries are mainly observed in high-speed accidents with high body deceleration and direct load force to the chest. Mostly chest compression is responsible for the load direction to the cardiac vessels. The main observed load vector is from caudal-ventral and from ventral solely, but also force impact from left and right side and in roll-over events with chest compression lead to traumatic aortic injuries. Classically, the injury appeares at the junction between the well-fixed aortic arch and the pars decendens following a kind of a scoop mechanism, a few cases with a hyperflexion mechanism are also described. In our analysis the deceleration effect alone never led to an aortic rupture. Comparing the past 40 years aortic injuries shift from unprotected car occupants to today's unprotected vulnerable road users like pedestrians, cyclists and motorcyclists. Still the accident characteristics are linked with chest compression force under high speed impact, no seatbelt and direct body impact.
To elucidate the risk of pedestrians, bicycle and motorbike users, data of two accident research units from 1999 to 2014 were analysed in regard to demographic data, collision details, preclinical and clinical data using SPSS. 14.295 injured vulnerable road users were included. 92 out of 3610 pedestrians ("P", 2.5%), 90 out of 8307 bicyclists ("B", 1.1%) and 115 out of 4094 motorcycle users ("M", 2.8%) were diagnosed with spinal fractures. Thoracic fractures were most frequent ahead of lumbar and cervical fractures. Car collisions were most frequent mechanism (68, 62 and 36%). MAIS was 3.8, 2.8 and 3.2 for P, B and A with ISS 32, 16 and 23. AIS-head was 2.2, 1.3 and 1.5). Vulnerable road users are at significant risk for spine fractures. These are often associated with severe additional injuries, e.g. the head and a very high overall trauma severity (polytrauma).
While cyclists and pedestrians are known to be at significant risk for severe injuries when exposed to road traffic accidents (RTAs) involving trucks, little is known about RTA injury risk for truck drivers. The objective of this study is to analyze the injury severity in truck drivers following RTAs. Between 1999 and 2008 the Hannover Medical School Accident Research Unit prospectively documented 43,000 RTAs involving 582 trucks. Injury severity including the abbreviated injury scale (AIS) and the maximum abbreviated injury scale (MAIS) were analyzed. Technical parameters (e.g. delta-v, direction of impact), the location of accident, and its dependency on the road type were also taken into consideration. The results show that the safety of truck drivers is assured by their vehicles, the consequence being that the risk of becoming injured is likely to be low. However, the legs especially are at high risk for severe injuries during RTAs. This probability increases in the instance of a collision with another truck. Nevertheless, in RTAs involving trucks and regular passenger vehicles, the other party is in higher risk of injury.
Motorcycle crashes in Austria: Analysis of causes and contributing factors based on in-depth data
(2017)
From CEDATU, the in-depth accident database run by the Vehicle Safety Institute at Graz University of Technology, a representative sample of 101 crashes involving at least one motorcycle was selected. The analysis focused on causes for crashes as well as on contributing factors, but also included parameters of road, riders and vehicles. Own riding speed and "unexpectable action by another road user" were the most frequent causes for accidents. Inappropriate safety distance or delayed reaction were frequent, both as causation factors and as contributing factors. Infrastructure issues never cause an accident, but they are very frequent as contributing factors; road geometry and road guidance are by far most frequent among these. This paper also discusses accidents by type and other parameters (e.g. injury severity by body region, collision speed, age and others), and compares accident causes to previous studies as well as the police reported accident statistics.
Millions of kilometers are driven and recorded by car manufacturers and researchers every year to gather information about realistic traffic situations. The focus of these studies is often the recording of critical situations to create test scenarios for the development of new systems before introducing them into the market. This paper shows a novel Analysis and Investigation Method for All Traffic Scenarios (AIMATS) based on real traffic scenes. It also shows how to get detailed information about speeds, trajectories and behavior of all participants without driving thousands of kilometers at the example of conflict situations with animals. Basis of the AIMATS is the identification of the most relevant locations as "Points of Interest" (POI), the recording of the critical situations and their "base lines" at these POI. This paper presents a new method to identify critical scenarios involving both vehicles and animals as well as preliminary results of a study done in Saxony using this new method.
Interdisciplinary accident research and research projects of AARU Audi Accident Research Unit
(2017)
AARU (Audi Accident Research Unit) is an interdisciplinary research project of the University Hospital Regensburg in cooperation with AUDI AG. Specific objective is to comprehend the respective accident scenario and retrieve generally applicable findings as to technical, medical and psychological processes. In order to prevent traffic accidents and to alleviate vehicle accident consequences, postulates of general traffic safety, human-machine interaction, technical design and function of new vehicles and occupant as well as third party protection shall be inferred from these findings. Specifically, each accident with new Audi, Lamborghini and Ducati vehicles involved is analyzed interdisciplinary, discussed in a case meeting and anonymously documented with more than 2,000 parameters. The database is continually used for solving safety relevant issues. Parallel to accident analysis, research projects are performed in the fields medicine, psychology and engineering in order to gain comprehensive insight and identify potential additional areas of activity of accident research.
Die Arbeit vermittelt einen Überblick über die aktuelle Inhaltsstruktur der Automobilwerbung und die Entwicklung dieser Werbung im zeitlichen Verlauf. Die Analyse ist beschränkt auf die Anzeigenwerbung aus jeweils einer Auto- und Motorradzeitschrift und umfasst den Zeitraum von 1970 bis 1984. Die Werbetexte werden folgenden Kategorien zugeordnet: Wirtschaftlichkeit (Gebrauchswert), Komfort, Sicherheit, Sportlichkeit/Leistung und Technik. Als wesentliche Befunde der inhaltsanalytischen Untersuchung werden herausgestellt: 1. In der Automobilwerbung kann ein neuer Trend zur Leistungsbetonung bei gleichzeitiger Abschwächung wirtschaftlicher Gesichtspunkte festgestellt werden; 2. In der Motorradwerbung hat sich die Sportlichkeits- und Leistungsbetonung nicht weiter verstärkt; 3. Der Betonung des Leistungsaspektes entsprechend nimmt die Bedeutung von Geschwindigkeitsangaben im Kontext der Werbeanzeigen zu; 4. Im Sinne der Verkehrssicherheit als weitgehend unkritisch ist die Zubehörwerbung einzustufen. Aus der Diskussion der Analyseergebnisse werden Forschungsthemen abgeleitet, die die exemplarische Überprüfung der Wirkungsrichtung und des mutmaßlichen Wirkungsgrades, die Wirkung von produktbezogener Werbung und Sicherheitsaufklärung in vergleichender Abschätzung sowie die Wirkungen von leistungs- und erlebnisbetonender Werbung auf das Fahrverhalten, insbesondere von jungen Fahranfängern zum Gegenstand haben.
Ziel des Forschungsprojektes war die Erarbeitung eines webbasierten Verfahrens für die Verkehrssicherheitsarbeit, welches dem Anwender bei der Bearbeitung von Unfallhäufungen potenziell geeignete Maßnahmen in Abhängigkeit der örtlichen Randbedingungen vorschlägt, deren Sicherheitswirkung abschätzt sowie die Möglichkeit bietet, die Maßnahmenwirkung in einer retroperspektiven Betrachtung zu evaluieren. Dabei stellt das Verfahren eine Weiterentwicklung und Ergänzung des Merkblatts "Auswertung von Straßenverkehrsunfällen, Teil 2: Maßnahmen gegen Unfallhäufungen" (FGSV 2002) dar. Grundgerüst der Maßnahmensammlung bilden neben dem Merkblatt der FGSV (2002) aktuelle Erkenntnisse verschiedener Forschungsarbeiten (SPAHN 2012, GERLACH et al. 2009, MAIER et al. 2010, u. w.) zu Maßnahmen gegen Unfallhäufungen, die einer Prüfung und Kategorisierung unterzogen wurden. Der Hauptbestandteil des webbasierten Verfahrens umfasst Schritte zur Unfallanalyse, Maßnahmenfindung und Wirksamkeitsprüfung nach dem "Merkblatt zur örtlichen Unfalluntersuchung in Unfallkommissionen " M UKo" (FGSV 2012). Mit der Übermittlung der Unfallinformationen zu Unfallhäufungen aus den EDV-Systemen der Unfalldatenhaltung in das Programm ist eine spezifische Bearbeitung von Unfallhäufungen möglich. Darüber hinaus wird die Möglichkeit von Rangfolgebildungen zur zielgerichteten Priorisierung von Arbeitsprogrammen angeboten. Die Vorschläge geeigneter Maßnahmen zur Bekämpfung einer Unfallhäufung stuetzen sich im Verfahren auf die Analyse typischer Konfliktsituationen, welche aus den Unfalldatensätzen bestimmt werden. Zur Überprüfung der Angemessenheit und Durchsetzbarkeit von Maßnahmen (-paketen) steht dem Anwender eine Abschätzung des Nutzen-Kosten-Verhältnisses auf Basis des fallbezogenen Unfallgeschehens zur Verfügung. Die kontinuierliche Anwendung des Verfahrens erlaubt dem Nutzer die Dokumentation der Arbeitsschritte. Diese beinhaltet über die Umsetzungskontrolle hinaus wiederum eine fallbezogene Wirksamkeitsprüfung (Evaluierung) der realisierten Maßnahmen. Die stetige Aktualisierung der Maßnahmen und ihrer Kenngrößen (u. a. Wirkungsgrad, Kosten) stellt einen wesentlichen Bestandteil des webbasierten Verfahrens dar, um einen zielorientierten Beitrag zur Bekämpfung von Unfallhäufungen zu leisten.
Ziel des Forschungsvorhabens war es zu untersuchen, ob in verschiedenen Prüfstellen mit dem Walzsektor-Verdichtungsgerät hergestellte Asphalt-Probeplatten gleiche Eigenschaften aufweisen, damit z.B. verträgliche Ergebnisse für Performance-Prüfungen ermittelt werden können. Dazu wurde in 12 Prüfstellen ein Verfahrens-Audit durchgeführt, um eine einheitliche Vorgehensweise bei der Herstellung dieser Platten zu gewährleisten. Anschließend wurden aus verschiedenen Asphaltvarianten WSV-Platten hergestellt und an daraus gewonnenen Probekörpern umfangreiche Performance-Prüfungen durchgeführt. Die ermittelten Ergebnisse zeigen, dass es möglich ist WSV-Platten mit verträglicher Raumdichte in unterschiedlichen WSV-Geräten sowie verschiedenen Prüfstellen herzustellen. Die Ergebnisse der Spurbildungs-, Druck-Schwell- und Zugversuche haben gezeigt, dass die WSV-Platten trotz ähnlicher Raumdichten nicht zwangsläufig verträgliche Ergebnisse im Versuch aufweisen und sich daher in verschiedenen Prüfstellen keine vergleichbaren Ergebnisse für diese Versuche ermitteln lassen. Lediglich bei den Abkühl- und Spaltzug-Schwellversuchen konnten verträgliche Ergebnisse erzielt werden. Für keine der ermittelten Kenngrößen der Performance-Prüfungen ließen sich Zusammenhänge mit der Raumdichte ermitteln. Somit lässt sich die Größe der Ergebnisse bei den Versuchen nicht auf unterschiedliche Größen der Raumdichten der Probekörper zurückführen. Da sich trotz geringer Unterschiede in den Raumdichten nur in ausgewählten Performance-Untersuchungen Unterschiede zeigen, ist davon auszugehen, dass die Streuungen in den Performance-Untersuchungen vornehmlich auf die Sensitivität dieser Versuche zurückzuführen sind. Das Verfahren zur Herstellung von Probekörpern für Performance-Prüfungen aus WSV-Platten scheint aufgrund der Gesamtheit der ermittelten Kenngrößen (Raumdichte, etc.), deren Aussehen, den Erkenntnissen aus dem Verfahrensaudit sowie der Performance-Prüfungen das richtige Verfahren zu sein.
Unfallgeschehen zwischen rechtsabbiegenden Güterkraftfahrzeugen und geradeausfahrenden Radfahrern
(2014)
Abbiege-Unfälle von Fahrzeugen, bei denen Radfahrer zu Schaden kommen, gehören zu den schweren Radfahrunfällen, insbesondere, wenn sie sich in einer "Tote Winkel"-Situation mit einem Güterkraftfahrzeug ereignen. Unklar ist die genaue Anzahl der Unfälle und die Unfallschwere, welche mit dieser Unfallkonstellation in Zusammenhang stehen können. In der Unfall-Analyse wurden dazu Daten der amtlichen Straßenverkehrsunfallstatistik der Jahre 2008 bis 2012 untersucht. Festgestellt wurde, dass diese Unfälle lediglich 1 % aller Radfahrunfälle sowie rund 6 % der insgesamt 406 getöteten Radfahrer darstellen. Durch eine weitere Differenzierung von "Tote Winkel"-Unfällen nach dem zulässigen Gesamtgewicht der Güterkraftfahrzeuge konnte festgestellt werden, dass die schweren Unfälle überwiegend geprägt sind von schweren Güterkraftfahrzeugen mit zulässigem Gesamtgewicht über 7,5 t sowie Sattelschleppern. Theoretisch wird bei jedem 10. "Tote Winkel"-Unfall zwischen einem rechtsabbiegenden, schwerem Güterkraftfahrzeug und einem geradeausfahrenden Radfahrer ungefähr ein Radfahrer getötet. Im laufenden Forschungsvorhaben "Toter Winkel " Konflikt zwischen rechtsabbiegenden Lkw und geradeausfahrendem Radverkehr" sollen die Verkehrssicherheitsdefizite analysiert werden. Des Weiteren wurde ein Forschungsvorhaben "Entwicklung eines Testverfahrens für Nutzfahrzeug-Abbiegeassistenzsysteme" initiiert, um eine Testkonfiguration für die Detektion von Radfahrern und die Warnung des Fahrzeugführers auf Basis von Unfallszenarien abzuleiten.
Enhanced protection of pedestrians and cyclists remains on the focus. Besides infrastructural and behavioral aspects it is necessary to exploit technical solutions placed on motorized vehicles. Accident research needs reliable data as well as national road accident statistics. Changing the view on seriously injured road users is one of the challenges which will substantially contribute to the optimization on future traffic safety. The missing accuracy in the definition of personal injury has a detrimental effect on making cost efficient road safety policy which is not only focused on fatal accidents. The European commission requested that, starting in 2015, all EU member states provide more detailed data on the injury status of road casualties, with special regard to the group of seriously injured. Conventional accident data will always be essential. But to obtain detailed data about driver behavior in real traffic situations further data sources are required. These could be EDR data, data from electronic control units, data from traffic surveys and traffic counting, naturalistic diving studies and field operational tests. Gaining insight into normal as well as critical driver behavior will enable accident researchers to deduct functions estimating the increase or decrease of accident risk associated with certain behaviors or vehicle functions. Also with view to the introduction of highly automated driving functions in the future such data is urgently needed. Computer simulation based tools to estimate the benefits of active safety systems are another step on the way towards the safety assessment of automated driving. It is now the duty of the scientific community to ask the right questions, to develop a methodology and to merge all these data sources into a common framework for the assessment of future traffic safety innovations.
SEEKING is looking for answers regarding electric powered bicycles and their relation to traffic safety issues. Does a cyclist need "E"? Is it as risky as riding a moped or are E-bikes creating conflicts with other cyclists? The project described herein, funded by the Austrian Ministry of Transport, has the aim of seeking answers to these hot topics. The SEEKING-team shows an in-depth investigation of vehicle dynamic sensing, together with subjective feedback of test riders to detect similarities and differences between conventional cycling and E-biking. Following an overview on the international status quo, measurement runs and their analyses are performed to find a set of preventative measures to make (E-)biking safer. A specific focus is the detection of curve handling, stopping and acceleration phases as well as conflict studies on course-based test rides and "real world" tests on cycling paths (naturalistic riding).
In general the passive safety capability is much greater in newer versus older cars due to the stiff compartment preventing intrusion in severe collisions. However, the stiffer structure which increases the deceleration can lead to a change in injury patterns. In order to analyse possible injury mechanisms for thoracic and lumbar spine injuries, data from the German Inâ€Depth Accident Study (GIDAS) were used in this study. A twoâ€step approach of statistical and caseâ€byâ€case analysis was applied for this investigation. In total 4,289 collisions were selected involving 8,844 vehicles, 5,765 injured persons and 9,468 coded injuries. Thoracic and lumbar spine injuries such as burst, compression or dislocation fractures as well as soft tissue injuries were found to occur in frontal impacts even without intrusion to the passenger compartment. If a MAIS 2+ injury occurred, in 15% of the cases a thoracic and/or lumbar spine injury is included. Considering AIS 2+ thoracic and lumbar spine, most injuries were fractures and occurred in the lumbar spine area. From the case by case analyses it can be concluded that lumbar spine fractures occur in accidents without the engagement of longitudinals, lateral loading to the occupant and/or very severe accidents with MAIS being much higher than the spine AIS.
Die Behandlungskosten von Unfallverletzten werden herkömmlich durch Multiplikation der durchschnittlichen Krankenhaus-Verweildauer mit dem vollpauschalierten und für alle Patienten gleichen Krankenhaus-Tagessatz ermittelt. Zielsetzung der vorliegenden Untersuchung ist es, den tatsächlichen Leistungsaufwand für die Gruppe der Unfallverletzten differenzierter zu erfassen, und zwar durch Addition von Einzelleistungen, die den Input für die stationäre Behandlung darstellen. Eine solche fallbezogene Kostenkalkulation wurde in ausgewählten Krankenhäusern für alle straßenverkehrsunfallverletzen Patienten des Jahres 1989 vorgenommen. Für Unfallverletzte in ambulanter Behandlung ergeben sich durchschnittliche Fallkosten in Höhe von 244 DM. Für die 5 häufigsten Einzeldiagnosen wurden folgende Werte ermittelt. 1. Prellungen der unteren Extremitäten: DM 287 je Patient. 2. Verstauchungen und Zerrungen im Rückenbereich: DM 149 je Patient. 3. Prellungen des Kopfes und des Halses: DM 326 je Patient. 4. Prellungen der oberen Extremitäten: DM 196 je Patient. Für Unfallverletzte in stationärer Behandlung ergeben sich durchschnittliche Fallkosten in Höhe von DM 4.824. Die Kosten liegen bei der Hälfte aller stationär behandelten Patienten unterhalb von DM 2.000. Bei 37 Prozent der Verletzten belaufen sie sich auf einen Betrag zwischen DM 2.000 und DM 7.000, wohingegen 13 Prozent der Fälle eine Behandlung benötigte die mehr als DM 10.000 an Kosten verursachte. Betrachtet man die Kosten der 10 häufigsten Einzeldiagnosen, so lassen sich zwei Gruppen bilden. Gehirnerschütterungen, Prellungen und Verstauchungen verursachten Kosten von weniger als der Hälfte des Durchschnittswertes von DM 4.824, wogegen für Frakturen als zweiter Gruppe weit darüber liegende Beträge errechnet wurden. Die Behandlungskosten von Unfallverletzungen mit Todesfolge liegen aufgrund der Verletzungsschwere bei DM 17.246 im Durchschnitt. Die Ergebnisse zeigen, dass die durchschnittlichen Behandlungskosten von Unfallverletzten in Akutkrankenhäusern in etwa den durchschnittlichen Behandlungskosten aller Patienten in Akutkrankenhäusern entsprechen.
Ziel der Untersuchung war die Findung von Grundlagen, die eine Beurteilung des Rettungsdienstes im Hinblick auf seine Effizienz ermöglichen. Für die Durchführung der Effizienzanalyse wurde ein Messkonzept entwickelt, mit dessen Hilfe Input und Output des Systems "Rettungsdienst" erfasst und mit Hilfe von Kenngrößen einer vergleichenden Analyse unterzogen werden konnten. Mit der Analyse des Inputs wurden alle im Rettungsdienst eingesetzten Faktoren mengen- und wertmäßig erfasst sowie deren Kombination durch Analyse der Aufbau- und Ablauforganisation ermittelt. Als wesentliche Grundlage einer Kostenanalyse diente eine vollständige und detaillierte Kostenrechnung. Die Analyse, die zum Aufbau eines Kenngrößensystems erfolgt, wurde für ein konkretes Untersuchungsgebiet vorgenommen. Auf der Outputseite wird ein erheblicher Informationsmangel im Hinblick auf die Einsatzqualität festgestellt. Gefordert wird eine einheitliche Dokumentation wesentlicher Einsatzmerkmale, die eindeutige Rückschlüsse auf das Einsatzgeschehen zulässt.
Teil 1: In der Verkehrssicherheitsforschung können Sicherheitswirkungen zumeist nicht im (Labor)experiment sondern nur durch Feldversuche, die einem Experiment ähnlich anzulegen sind, erfasst werden. In diesem Zusammenhang spricht man von einem Quasi-Experimentellen-Design. Da sich bei solchen Quasi-Experimenten immer die Frage stellt, ob die gemessenen Änderungen maßnahmebedingt sind oder auf andere Einflüsse zurückgeführt werden können, werden verschiedene Gefahrenquellen benannt und mit Beispielen belegt, die die Gültigkeit der Ergebnisse von Wirksamkeitsuntersuchungen beeinträchtigen können. Es werden darüber hinaus eine Reihe wichtiger Quasi-Experimenteller-Designs dargestellt, die Vor- und Nachteile der Designs diskutiert und Hinweise auf mögliche Einsatzfelder gegeben. Um die Qualität der Ergebnisse von Wirksamkeitsuntersuchungen zu verbessern, wird vorgeschlagen, mehrere Erhebungen mittels ein und derselben Untersuchungsanordnung zugleich an mehreren Orten oder an mehreren Untersuchungsgruppen durchzuführen. Es werden mehrere simultane Untersuchungsdesigns vorgestellt und Einsatzbereiche erläutert. Teil 2: Simultane Wirksamkeitsuntersuchungen von Maßnahmen zur Hebung der Verkehrssicherheit erfordern häufig statistische Methoden zur Analyse von Kennzahlen, die auf andere Kennzahlen bezogen sind. Diese bezogenen Kennzahlen bezeichnet man als Risikogrößen. Es werden Methoden vorgestellt und diskutiert, die eingesetzt werden können, wenn entweder die Bezugsgrößen fest oder stochastisch sind.
Ziel der beschriebenen Untersuchung ist die Ergründung streckencharakteristischer Merkmale bei lokalen Häufungen überwiegend fahrdynamisch begründeter Unfälle auf einbahnigen Außerortsstraßen sowie die Erarbeitung geeigneter Abhilfemaßnahmen. Es wurden Streckenabschnitte mit Unfallhäufungsstellen in Rheinland-Pfalz, Hessen, Saarland und Baden-Württemberg ausgewählt. Auf 58 Untersuchungsstrecken wurde das Geschwindigkeitsverhalten und die streckencharakteristische Geschwindigkeit durch Geschwindigkeitsprofile mit Hilfe von Messfahrten untersucht. Die Streckencharakteristika wurden nach quantifizierbaren Merkmalen wie Kurvigkeit und Krümmungsradien sowie nach subjektiven Beurteilungskriterien aufgeschlüsselt. Unfallhäufungsbereiche wurden durch Beschreibungsmerkmale gekennzeichnet, die den kombinierten Einfluss der Trassierungselemente, der Ausstattung und des Umfeldes erfassten. Die Versuche, quantitative Zusammenhänge zwischen Unfallkennzahlen und einzelnen streckencharakteristischen Merkmalen herzustellen, misslangen. Als weitaus häufigstes Merkmal innerhalb der Unfallhäufungsbereiche zeigte sich eine lokale Steigerung der Kurvigkeit in einer bereits kurvigen Umgebung. An zweiter Stelle der Häufigkeit steht die Mitwirkung von Querneigungs- und Fahrbahndeckenmängeln. Die Autoren stellen fest, dass die heutigen Richtlinien zur Linienführung von Straßen (RAS-L-1) keine ausreichenden Kriterien enthalten, um die häufigste festgestellte Unfallursache zu vermeiden, die darin zu sehen ist, dass innerhalb kurviger Strecken Einzelkurven mit größerer Richtungsänderung und/oder etwas kleinem Krümmungsradius auftreten. Hieraus wird die Notwendigkeit einer entsprechenden Überarbeitung der Richtlinie abgeleitet.
Auf der Basis einer umfangreichen Literaturanalyse, die zu dem Ergebnis kommt, dass trotz einer großen Zahl häufig untersuchter Straßenparameter ein verlässliches Modell zur Geschwindigkeitsprognose noch nicht existiert, resultierte ein empirischer Untersuchungsansatz, in dem bei Versuchsfahrten das Blickverhalten und die Geschwindigkeitswahl von Versuchspersonen gleichzeitig erhoben und quantitativ erfassten Merkmalen des Straßenraums gegenübergestellt wurde. Durch die Untersuchung wurden bisherige Erkenntnisse über Gestaltungsanforderungen an Straße und Straßenumfeld durch die Zuordnungen zur Straßensituation und Geschwindigkeitsregulation bestätigt. Trotz einer starken Streuung erfasster Einzelwerte ließen sich qualitative Reaktionen zwischen den Untersuchungsbereichen Geschwindigkeit, Straßenraum und Blickverhalten feststellen, wobei korrelative Zusammenhänge jedoch kaum erkennbar wurden.
Ziel der Arbeit war die Aufstellung von Maßnahmen, die zur Erhöhung der nächtlichen Verkehrssicherheit auf außerörtlichen Straßen (ohne BAB) geeignet erscheinen. Die Maßnahmen wurden bezüglich ihrer Wirksamkeit bewertet, ihre Durchsetzbarkeit abgeschätzt. Einer detaillierten Auswertung der relevanten Unfallstatistik folgen die Aufstellung und Beschreibung spezifischer Maßnahmen. Diese werden bewertet und einer Prioritätenreihung unterzogen. Umsetzungsmöglichkeiten werden ausführlich diskutiert. Die aus der Untersuchung abgeleiteten Empfehlungen betreffen in erster Linie verstärkte Informationsarbeit und die Beseitigung von Unfallschwerpunkten.
Gegenstand der Untersuchung ist die Bestandsaufnahme des Versorgungsniveaus für Notfallpatienten einer Region sowie die Überprüfung der Frage, ob dieses Versorgungsniveau bedarfsgerecht unter Einhaltung der gesetzlichen Vorgaben sichergestellt wird. Aus den Ergebnissen der Untersuchung der Eintreffzeiten für 19 Notarztsysteme wird ein Handlungsbedarf abgeleitet,der sich auf die Optimierung der bestehenden Rettungssysteme konzentriert. Für die zukünftige Planung wird ein Maßnahmenkatalog formuliert, derzu einer Verbesserung der Notfallversorgung in der untersuchten Region führt.
Im Zentrum steht die Frage, wie lückenlos und in welchem Umfang ein ganzes Großstadtgebiet von dem NAW-Dienst versorgt wird, der den Anspruch erhebt, flächendeckend zu arbeiten. Untersucht wird, wie dieser Dienst den spezifischen gebiets- und bevölkerungsstrukturellen Unterschieden Rechnung trägt. Ferner wird gefragt, inwieweit die Einsatz- und Interventionsstrategien des NAW-Dienstes nicht so angelegt sind, dass sie Versorgungsungleichheiten produzieren und/oder verstärken. Dokumentiert und ausgewertet wurden 15.716 Einsätze, die der mit 5 Notarztwagen ausgestattete NAW-Dienst in Berlin-West innerhalb eines zwölfmonatigen Zeitraums durchgeführt hat. Zusätzlich wurden Daten des ökologischen Kontexts einbezogen, ferner Feuerwehrdaten (technische Einsatzdaten) und klinische Beurteilungen der NAW-Patienten, die in Krankenhäuser eingewiesen wurden. Die Ergebnisse zeigen zeitliche und regionale Differenzen der Einsätze, das Einsatzspektrum des ganzen NAW-Dienstes wie auch der einzelnen Fahrzeuge und die Phasen des Einsatzes. Weite Teile des Berichts verdeutlichen, wie sich differente Interventionsstrategien einzelner Stützpunkte auswirken. Untersucht wird die Wirksamkeit des NAW-Dienstes in Begriffen der Indikationsverifizierung, der Überlebenschancen und der prospektiven Versorgungsaufwendungen für NAW-Patienten nach der klinischen Behandlung.
Im Rahmen einer schriftlichen Befragung konnten von rund 15.000 Schülern der Klassen 6, 8 und 10 aus den vier Landkreisen Ammerland, Holzminden, Northeim und Wesermarsch sowie aus den Städten Celle und Hannover Daten zur Verkehrs- und Unfallbeteiligung dieser Personengruppe erhoben werden. Die Befragung wurde im Schuljahr 1987/88 durchgeführt. Aufgrund des hohen Rücklaufs von 86,2 % aller angeschriebenen Schüler ergibt sich ein Befragungsumfang von 6,9 % aller Schüler der Klassen 6,8 und 10 in Niedersachsen. Die Verteilung der befragten Schüler auf die verschiedenen Schulformen spiegelt die niedersächsische Schullandschaft im Bereich der Sekundarstufe I gut wieder. Hinsichtlich der Unfallbeteiligung der Schüler wurde ermittelt, dass die amtlichen Zahlen über Verkehrsunfälle (der Polizei und der Unfallversicherungsträger) deutlich niedriger liegen als die Zahlen der von den Schülern genannten Unfälle. Ferner ist festzustellen, dass die Polizei in den städtischen Regionen wesentlich häufiger zur Unfallaufnahme hinzugezogen wird, als in den ländlich geprägten Regionen. Bezüglich der Verkehrsbeteiligung der befragten Schüler ist festzuhalten, dass sowohl die Dauer der Verkehrsbeteiligung als noch stärker die Art - das heißt die Verkehrsmittelwahl - durch das Alter, das Geschlecht, die besuchte Schulform und auch durch regionale Faktoren bestimmt werden. Diese Tatsache führte zu dem Ergebnis, dass über die Untersuchungsregionen hinausgehende generelle Aussagen zur Verkehrs- und Unfallbeteiligung kaum zu treffen seien. Effektive Unfallanalysen bedürfen der kleinräumigen Betrachtungsweise.
Im Jahr 1983 wurde eine Untersuchung zur Organisation des Rettungsdienstes im Saarland durchgeführt (vergleiche FP 7.8223, Anwendung des Simulationsmodells Rettungswesen im Saarland). Ein erstes Ziel dieses neuen Projektes war es, die seit der letzten Untersuchung des Rettungsdienstes im Saarland zwischenzeitlich realisierten Maßnahmen (Aufhebung der Krankentransportstellen, Ausbau der Notarztsysteme, etc.) zusammenzustellen und mit der 1983 vorgefundenen Situation zu vergleichen. Es sollte außerdem überprüft werden, ob die festgestellte Zunahme der Notarzteinsätze zu einer Verschiebung der Indikationsstruktur geführt hat beziehungsweise ob der Nachweis geführt werden kann, dass tatsächlich medizinisch begründet der Ausbau der Notarztsysteme sinnvoll war. Der Vergleich der Infrastruktur des Rettungsdienstes im Saarland zeigt, dass im Jahr 1988 25 Rettungswachen existieren, also eine weniger als 1983. Dagegen hat sich die Anzahl der Krankentransportstellen um 4 von 12 auf 16 erhöht. Die Anzahl der bodengebundenen Notarztstandorte hat sich gegenüber 1983 verdoppelt (14 gegenüber 7), wobei die Anzahl der Kompaktsysteme (NAW) mit 5 unverändert blieb. Im Jahr 1984 wurde vorgeschlagen neben den bereits damals geplanten neuen Notarztstandorten zusätzlich in St. Wendel und Lebach Notarztstationen zu errichten. Dieser Vorschlag wurde zwischenzeitlich realisiert. Ebenso ist die damals vorgeschlagene Verlegung der Rettungswache Marpingen nach Tholey in die Realität umgesetzt worden. Im Untersuchungszeitraum 1988 liegt ein um 30 % höheres Einsatzaufkommen als 1983 vor. Einsatzklassenspezifisch ergibt sich hierbei die höchste Zuwachsrate für Notarzteinsätze mit +175 % gefolgt von Krankentransporten (+24 %) und Notfällen (+9%). Betrachtet man Notarzt und Notfalleinsätze zusammen ergibt sich eine Zuwachsrate von 40 %. Für die Gesamtheit der Notfalleinsätze (mit und ohne Notarztindikation) zeigt sich, dass 1988 eine höher qualifizierte Bedienung erfolgt. Während 1983 nur 18,5 % dieser Einsätze als Notarzteinsätze bedient wurden, beträgt 1988 der entsprechende Wert 36,4 %. 1988 hat sich demnach der Anteil der mit Notarzt versorgten Notfalleinsätze verdoppelt. Der Vergleich der Indikationsstellung bei Notarzteinsätzen für die Jahre 1984 bis 1987 hat gezeigt, dass der Anteil der nicht indizierten Notarzteinsätze kontinuierlich über die Jahre 1984 bis 1987 abnimmt. Während 1984 noch 12,2 % dieser Einsätze als nicht indiziert eingestuft wurden, gilt dies 1987 noch für 8,9 % der Einsätze. Gegenüber 1984 ist der Anteil dieser Einsätze somit um 27 % gesunken. Diese Tatsache kann als ein Indiz dafür gewertet werden, dass die in der Rettungsleitstelle getroffenen Entscheidungen über Einstufung der Einsätze aufgrund des Meldebildes zunehmend präziser wurden. Gleichzeitig hat über die Jahre der Anteil der absolut indizierten Notarzteinsätze von 54,3 % im Jahr 1984 auf 57,2 % im Jahr 1987 zugenommen.
Intelligente Bauwerke - Anforderungen an die Aufbereitung von Messgrößen und ihrer Darstellungsform
(2015)
Ziel des Forschungsvorhabens FE 15.0548/2011/GRB war die Ausarbeitung einer Konzeption zu Anforderungen an die Aufbereitung und Verarbeitung von Messgrößen und ihrer Darstellung. Dies beinhaltete die Evaluierung und Entwicklung verschiedener modellbasierter und statistischer Analyseverfahren, die über den bisherigen Stand der Technik der Bauwerksüberwachung hinausgehen. Der Nutzen liegt in der Herausfilterung relevanter Informationen aus umfangreichem Datenmaterial (Vor-Aggregation) sowie der Erzeugung von belastbaren Zustandsinformationen bzw. Vorergebnissen hierzu durch eine frühzeitige, leistungsfähige Plausibilisierung. Es wurde gezeigt, dass durch den Einsatz von leistungsfähigen, gedächtnisbehafteten, selbstlernenden Algorithmen für die Sensorfusion, Interpolation, Plausibilitätserhöhung und Treffen fachtechnischer Monitoringaussagen Ergebnisse erzielt werden können, die bezüglich der Verarbeitung von Mess- und Erfassungsdaten weit über den aktuellen Stand beim Brückenmonitoring hinausgehen. Anhand mehrerer Szenarien, für die reale Erfassungsdaten zur Verfügung standen, wurde gezeigt, dass diese Verfahren sehr zuverlässig verschiedenste Signalstörungen, wie Messausreisser, erhöhtes Rauschen und Brummeinstreuung erkennen können. Nur durch die frühzeitige und zuverlässige Plausibilisierung von Sensordaten von Brückenbauwerken kann verhindert werden, dass offensichtlich fehlerhafte Messwerte (wie z.B. Messausreisser, störungsbehaftete Messungen) zu falschen Vorhersagen der Systemzuverlässigkeit von Brückenbauwerken durch rechnergestützte Systemmodelle führen.
The paper gives an overview of the recent (mostly 2012) figures of killed bus/coach occupants (drivers and passengers) in 27 Member States of the European Union as reported by CARE. The Evolution of the figures of bus/coach occupants killed in road accidents urban, rural without motorway and on motorways from 1991 to 2010 in 15 Member States of the EU supplements this information. More detailed are the figures reported for Germany by the Federal Statistics. The paper displays long-term evaluations (1957 to 2012) for killed, seriously and slightly injured occupants in all kinds of buses/coaches. Midterm evaluations (1995 to 2012) of the figures of fatalities and casualties are displayed for different busses according to their identification of road using as coaches, urban buses, school buses, trolley buses and "other buses". To be able to compare the evolutions of the safety of vehicle occupants it is customary to use different risk indicators. Calculations and illustrations for three often used indicators with their development over time are given: fatalities, seriously injured and slightly injured per 100,000 vehicles registered, per 1 billion (109) vehicle-kilometres travelled and per 1 billion (109) person-kilometres. These indicators are shown for occupants of cars, goods vehicles and buses/coaches. For the period from 1957 until 2012 it is obvious, that for all three vehicle categories analysed there was a clear long-term trend towards more occupant safety in terms of casualties per vehicles registered and per vehicle mileage. This was most significant for car occupants but it can be seen for bus/coach occupants and goodsvehicle occupants as well. Figures of killed occupants and of casualties related to person-kilometres are calculated and displayed for the shorter period 1995 to 2012. Here it becomes obvious that the bus/coach is still the safest mode of transport for the occupants of road vehicles. Graphs for the casualty risk indices still show significantly higher risks for car occupants despite the corresponding curve moved sustainable downwards. It is remarkable, that the risks of being killed or injured for the occupants of urban buses is growing whereas the corresponding risk for the occupants of coaches in line traffic tends downwards. The article ends with a short comparison and discussion of the risk indicators which are actually published for the occupants (driver and passengers) of cars and the passengers of buses/coaches, railroads, trams and airplanes. The interpretation of such information depends on the perception and it seems that for a complete view not only one indicator should be used and the evolutions of the indicator values during longer periods (as displayed with examples in the paper) should also be taken into account.
Abbiegeunfälle mit Kollisionen zwischen rechtsabbiegenden Güterkraftfahrzeugen und Fahrrädern haben in der Regel schwerwiegende Folgen für den ungeschützten Verkehrsteilnehmer. In der Vergangenheit wurde durch eine steigende Anzahl von Spiegeln das individuelle Sichtfeld des Lkw-Fahrers vergrößert und die Sicherheit für ungeschützte Verkehrsteilnehmer durch den Seitenunterfahrschutz verbessert. Da Abbiegeunfälle trotz der Vielzahl an Spiegeln auch heute noch geschehen, gleichzeitig aber Fahrerassistenzsysteme Einzug in viele Fahrzeugklassen gehalten haben, liegt es nahe, derartige Systeme für die Verhinderung von Abbiegeunfällen zu nutzen. Um entsprechende Systementwicklungen fördern zu können oder aber auch Systeme vorschreiben zu können, sind Anforderungen und passende Testmethoden für Abbiegeassistenzsysteme erforderlich. Ziel der BASt war es, solche Anforderungen und ein mögliches Testverfahren hierfür zu entwickeln. Ausgehend von Analysen des Unfallgeschehens wurden charakteristische Parameter und Begleitumstände von Unfällen zwischen Fahrrädern und rechtsabbiegenden Lkw identifiziert. Aus fahrdynamischen Überlegungen folgt bei den gegebenen Parametern, dass nur eine frühe, aber niederschwellige Fahrerinformation eine wirkungsvolle Assistenzfunktion zur Verhinderung der Unfälle sein kann. Für automatische Bremsungen gibt es bisher noch zu wenig Erfahrungen im Feld, und klassische, hochschwellige, aber sehr spät erfolgende Warnsignale würden durch die dann noch verstreichende Reaktionszeit keine rechtzeitige Bremsung des Lkw-Fahrers mehr hervorrufen. Basierend auf dem identifizierten Parameterraum, der zum komfortablen Anhalten erforderlichen Zeit und einem geeigneten Kinematikmodell lassen sich die räumlichen Bereiche um den Lkw definieren, in dem eine Umfelderkennung den Fahrradfahrer detektieren können muss, damit das Informationssignal durch das Assistenzsystem an den Lkw-Fahrer rechtzeitig ausgegeben wird. Aktuell wird davon ausgegangen, dass ein Abbiegeassistenzsystem, das die hier beschriebenen Prüfungen besteht, einen sehr positiven Einfluss auf das Unfallgeschehen zwischen rechtsabbiegenden Lkw und Fahrrädern haben wird.
In der Bundesrepublik ereignen sich jährlich ca. 2 Millionen polizeilich erfasste Straßenverkehrsunfälle. Hiervon sind weniger als 1.000 Unfälle als Großunfälle einzuschätzen. Eine der zentralen Erkenntnisse der Untersuchung besteht darin, dass "Quantensprünge" in der Vermeidung und Bewältigung von Großunfällen erst zu erwarten sind, wenn alle beteiligten Organisationen und Institutionen die anstehenden Aufgaben als organisations- und beteiligtenübergreifendes Managementproblem betrachten und demgemäß handeln. Deshalb stand die Entwicklung des Organisationskonzepts für ein Großunfall-Management Straßenverkehr im Mittelpunkt der Fragestellung. Fallanalysen haben deutlich gezeigt, dass weder Maßnahmen zur Vermeidung noch Strategien zur Bewältigung von Großunfällen räumlich eng begrenzt werden können. Selbst Kreisgrenzen, die beispielsweise im Katastrophenfall von besonderer Bedeutung sind, eignen sich als Bezugsraum nur bedingt. Deshalb empfiehlt sich die "Region", die im politisch-administrativen System der Bundesrepublik begrifflich nicht eindeutig festgelegt ist, als Basiseinheit. Das Großunfall-Management wird in Abhängigkeit von den vorhandenen Risikostrukturen bedarfsgerecht zugeschnitten. Besonderer Wert wurde des weiteren auf eine angemessene Definition und Typisierung von Großunfällen, auf die empirische Analyse von Großunfällen sowie auf die Bewertung der gesetzlichen Grundlagen der Unfallvermeidung und -bewältigung gelegt. Ein differenzierter Katalog von Maßnahmen für die Vermeidung und Bewältigung von Großunfällen rundet die Untersuchung ab.
Nachtunfälle : eine Analyse auf der Grundlage der Daten der amtlichen Straßenverkehrsunfallstatistik
(1978)
Im Anschluss an eine Charakterisierung der Nachtunfälle anhand von Einzelstudien werden Untersuchungen referiert, die die Auswirkungen bestimmter Umstände betreffen (Alkohol, Witterungseinflüsse, Unterschiede im Verkehrsaufkommen, Einfluss straßenbaulicher Merkmale, spezielle Orientierungsprobleme, Leistungsfähigkeit des Rettungsdienstes, Gurtanlegeverhalten). Anschließend wird über Untersuchungen berichtet, die die Wirksamkeit von Maßnahmen zur Reduzierung der Nachtunfälle betreffen (Wirksamkeit von Alkoholkampagnen, Überwachungsmaßnahmen und gesetzlichen Regelungen; Beleuchtung bzw. Sichtbarkeit des Verkehrsraumes; Wirksamkeitsuntersuchungen beleuchteter Fußgängerüberwege; Beleuchtung und Sichtbarkeit der Verkehrsteilnehmer; Verbesserung der optischen Führung durch Fahrbahnmarkierungen; Blendschutzeinrichtungen; Wildschutzzäune; Einführung der Sommerzeit; Verbesserung der Unfallrettung). Abschließend werden Fragestellungen vorgelegt, zu denen bisher keine befriedigenden Aussagen vorliegen. - Im zweiten Teil wird zunächst die Bedeutung der Nachtunfälle innerhalb des gesamten Unfallgeschehens in der zeitlichen Entwicklung dargestellt. Anschließend werden die kennzeichnenden Parameter des Unfallgeschehens für Unfälle mit Personenschaden erörtert (Art der Verkehrsteilnahme, Lebensalter sowie Geschlecht der Fußgänger bzw. Fahrer, Ortslage, Uhrzeit, Straßenzustand, Unfalltypen und -ursachen). Danach folgt eine mehrdimensionale Betrachtung zu ausgewählten Problembereichen (Unfallursache Alkohol, ungünstige Witterungsverhältnisse, jugendliche Fahrer von motorisierten Zweirädern, Pkw-Fahrer, Fußgänger). Schließlich wird über künftige Auswertungen berichtet.
In einer Untersuchung von 480 Kraftfahrern aus dem Kölner Raum wird geprüft, ob es möglich ist, den Lernprozess, der durch Beteiligung an einem Verkehrsunfall ausgelöst werden kann, für die Ziele der Verkehrssicherheitsarbeit nutzbar zu machen. Die Wirkungen des erlebten Unfalls und der Einfluss des verwendeten Informationsmaterials werden mit Hilfe von Kontrollgruppen methodisch voneinander abgegrenzt. Das methodische Vorgehen im Ablauf und in der Auswertung der Untersuchung ist speziell für die hier anstehenden Aufgaben entwickelt worden. Die Ergebnisse der durchgeführten Befragung zeigen, dass die meisten unfallbeteiligten Kraftfahrer aus eigener Kraft kaum in der Lage sind, aus der Entstehung des Unfalls kurzfristig für sich selbst Lehren im Sinne der Verkehrssicherheit zu ziehen. Erst mit Unterstützung durch das angebotene Informationsmaterial, das wenige Tage nach dem Unfall den Untersuchungsteilnehmern zugesandt worden ist, kann in vielen Fällen eine Interpretation des erlebten Unfallgeschehens selbstkritisch und sachlich vorgenommen werden. Besonders wichtig für eine Beeinflussung unfallbeteiligter Kraftfahrer ist: - am angebotenem Informationsmaterial interessiert zu sein, - Unfallgefahren vergegenwärtigen zu können, - die Verantwortlichkeit von Verkehrsteilnehmern für die Unfallvermeidung anzuerkennen und - eine angemessene subjektive Schuldzuweisung am eigenen Unfall vornehmen zu können. Die Arbeitsziele der Untersuchung, den unfallbeteiligten Kraftfahrer die Bedeutsamkeit der Sicherheit näherzubringen sowie Möglichkeiten der Unfallvermeidung zu verdeutlichen und in den Alltag integrieren zu helfen, sind in einem ausreichenden Maße erreicht worden. Die vorliegenden Ergebnisse lassen erkennen, dass das Bestreben unfallbeteiligter Kraftfahrer, Unfälle zu vermeiden, durch gezielte Informationen verstärkt werden kann. Nach dem derzeitigen Kenntnisstand erscheint es angemessen zu sein, einen weiteren Versuch unter Beteiligung eines interessierten Trägers, der auch später die gesamte Maßsnahme durchführen könnte, vorzubereiten. In einer dazugehörigen Evaluationsuntersuchung sollte u.a. ermittelt werden, ob auch das Fahren der beteiligten Kraftfahrer sicherer als vorher wird.
Der vorliegende Bericht analysiert das Unfallgeschehen von Fahrzeugen beim Transport gefährlicher Güter in Verpackungen der Jahre 1987 bis August 1992 auf dem Gebiet der alten Bundesländer. Ein Unfall wird als Gefahrgutunfall definiert, wenn in seinem Verlauf mindestens 100 kg/l Gefahrgut austreten und/oder wenn Personen durch Gefahrgut verletzt werden. Die Untersuchung umfasst insgesamt 90 solcher Unfälle. Angaben zur Dunkelziffer liegen für den Untersuchungszeitraum nicht vor. Um die Repräsentativität der vorliegenden Erhebung abzuschätzen, wurde die Anzahl der Unfälle von Stückgutfahrzeugen mit der in der amtlichen Straßenverkehrsunfallstatistik ausgewiesenen Anzahl verglichen. Es zeigt sich, dass ungefähr jeder zweite Unfall mit gefährlichen Gütern im Rahmen der vorliegenden Erhebung nicht erfasst wurde. Ausgehend von der Untersuchung der Unfallmerkmale wie Unfallort, -art und -umstände erfolgt eine Betrachtung der an Gefahrgutunfällen beteiligten Fahrer, wobei die charakteristischen Merkmale der beteiligten Gefahrgutfahrer gesondert hervorgehoben werden. Dabei wird deutlich, dass Gefahrgutunfälle überwiegend auf Autobahnen geschehen und hauptsächlich von den Gefahrgutfahrern verursacht werden. Die gefährliche Ladung war dabei oft sehr mangelhaft gesichert. Die besonderen Gefahren der untersuchten Stückgutunfälle gehen von den transportierten Gefahrgütern aus. Daher werden die Gefahrklassen sowie Transport- und Austrittsmengen der Güter dargestellt. "Entzündbare flüssige Stoffe" (29 Prozent) haben zusammen mit "Giftigen Stoffen" (26 Prozent) den größten Anteil an den transportierten Gefahrgütern. Im Durchschnitt hatten die Stückgutfahrzeuge rund 7.600 kg Gefahrgut geladen, von denen ungefähr 1.300 kg je Unfall freigesetzt wurden. Die Bewertung der Unfallfolgen erfolgt durch eine Abschätzung ihrer volkswirtschaftlichen Kosten. Die ermittelten Kosten werden für Personen- und Sachschäden sowie Primär- und Sekundärschäden ausgewiesen. Die gesamten volkswirtschaftlichen Kosten der 90 untersuchten Unfälle belaufen sich auf circa 20 Millionen DM.
Das Werkbuch enthält den Versuch, verschiedene Methoden zur Analyse von kreuztabellierten Daten mit Hilfe des Programms GLIM (Generalized Linear Interactive Modelling) darzustellen. Es ist eine Dokumentation von Vorgehensweisen und Erfahrungen und beruht auf praktischen Anwendungen, die in der Bundesanstalt für Straßenwesen gemacht wurden. Der Beschreibung des Prozesses der Datenbereitstellung und -übergabe nach GLIM folgt die Darstellung derjenigen GLIM-Anweisungen, die der Benutzer benötigt, um Daten selbständig mittels einfacher loglinearer beziehungsweise Logit-Modelle zu analysieren. Ein Anhang enthält eine ausführliche Kommandoübersicht mit deutschsprachigen Erläuterungen.
Es erfolgt eine Aktualisierung und Neufassung des von der Bundesanstalt für Straßenwesen (BASt) im Jahre 1978 veröffentlichten Berichts "Nachtunfälle - eine Analyse auf der Grundlage der Daten der amtlichen Straßenverkehrsunfallstatistik" (Brühning, Hippchen und Weißbrodt; 1978). Ausgewertet werden die Unfalldaten seit 1970, im Wesentlichen aber die Daten des Jahres 1985. Nachtunfälle haben innerhalb des gesamten Unfallgeschehens eine besondere Bedeutung. Sie sind im Mittel schwerer als Unfälle bei Tage: über 25 % aller Unfälle mit Personenschaden, aber rund 40 % aller Unfälle mit Getöteten ereignen sich nachts. Fußgänger werden zu 48,7 % bei Nachtunfällen getötet, 43,1 % der getöteten Pkw-Insassen sterben bei Nachtunfällen. Das Unfallrisiko ist nachts erheblich größer als bei Tage. Nachts steigt das fahrleistungsbezogene Unfallrisiko der Pkw außerorts (ohne BAB) auf das 1,7-fache, auf BAB auf das 1,5-fache des Risikos bei Tage an. Neben Angaben zur zeitlichen Entwicklung erfolgt zunächst ein Überlick über die wesentlichen Kenngrößen (Art der Verkehrsbeteiligung, Alter und Geschlecht der Fußgänger beziehungsweise Fahrer, Ortslage, Unfallmonat, Wochentag und Uhrzeit, Straßenzustand, Unfalltyp und Unfallursachen) des nächtlichen Unfallgeschehens. Darüberhinaus wird eine eingehende Betrachtung zu ausgewählten Problembereichen auf der Grundlage von Tabellenanalysen sowie multidimensionalen Analysen mittels Logit-Modellen durchgeführt. Im einzelnen handelt es sich um die Problembereiche "Alkohol", ungünstiger Straßenzustand, junge Fahrer von motorisierten Zweirädern, Pkw-Fahrer und Fußgänger. Desweiteren wird auf regionale Unterschiede nach Bundesländern im nächtlichen Unfallgeschehen eingegangen.
Eine Literaturstudie gleichen Namens war vor zehn Jahren von der BASt veranlasst worden; nun liegt eine überarbeitete und auf den Stand von 1986/87 gebrachte Fassung vor. Die Anzahl der erfassten Quellen ist von 221 auf 449 gestiegen. In tabellarischen Übersichten werden für einzelne Körperregionen Untersuchungsergebnisse zusammengestellt, die ermittelte oder vermutete Belastungsgrenzen anhand von physikalischen Parametern beschrieben; die Ergebnisse stammen zum überwiegenden Teil aus Leichenversuchen aber auch aus Versuchen mit Freiwilligen und mit Tieren sowie aus Unfallanalysen. Soweit verfügbar werden Untersuchungsergebnisse als Original-Tabellen in einem Anhang wiedergegeben. Damit ist die Auswahl relevanter Arbeiten erleichtert zur Abschätzung von Aufprall-Belastungen des Menschen als Fahrzeuginsasse oder als Fußgänger. Auf einschränkende Gesichtspunkte bei der Gewinnung und der Anwendung solcher Belastungsgrenzen wird hingewiesen und zugleich deren Bedeutung für eine vergleichende Bewertung von sicherheitstechnischen Maßnahmen bestätigt.
Am Beispiel des Rettungsdienstes wird die Frage untersucht, wie eine öffentliche beziehungsweise staatliche Aufgabe sichergestellt werden kann und welche Schwierigkeiten sich für die Bereiche Planung, Durchführung, Finanzierung und Beurteilung der Aufgabenerfüllung im Hinblick auf den Konsens der Beteiligten ergeben. Ganz auf der Grundlage einer Analyse des ökonomischen Systems "Rettungsdienst" werden die Bedarfs- und Angebotsstrukturen dargestellt. Die zugänglichen Datenbestände in bezug auf das Leistungs- und Kostenvolumen des Rettungsdienstes wurden ausgewertet und der Umfang der Leistungs- und Kostendimension abgeschätzt. Zur Verdeutlichung der Mehrstufigkeit des Leistungsprozesses und der institutionellen Aspekte bei der Beurteilung wird ein Phasenmodell vorgestellt. Anregungen für die Ergänzung der praktizierten Verfahren zur Analyse des Rettungsdienstes werden aufgezeigt.
A means of assessing the passive safety of automobiles is a desirable instrument for legislative bodies, the automobile industry, and the consumer. As opposed to the dominating motor vehicle assessment criteria, such as engine power, spaciousness, aerodynamics and consumption, there are no clear and generally accepted criteria for assessing the passive safety of cars. The proposed method of assessment combines the results of experimental safety tests, carried out according to existing legally prescribed or currently discussed testing conditions, and a biomechanical validation of the loading values determined in the test. This evaluation is carried out with the aid of risk functions which are specified for individual parts of the body by correlating the results of accident analysis with those obtained by computer simulation. The degree of conformance to the respective protection criterion thus deduced is then weighted with factors which take into account the frequency of occurrence and the severity of the accident on the basis of resulting costs. Each of the test series includes at least two frontal and one lateral crash test against a deformable barrier. The computer-aided analysis and evaluation of the simulation results enables a vehicle-specific overall safety index as well as partial and individual safety values to be determined and plotted graphically. The passive safety provided by the respective vehicle under test can be defined for specific seating positions, special types of accident, or for individual endangered parts of the body.
Many big cities in Europe and elsewhere in the world have problems managing the traffic especially during rush hours. The improvement of the parking problematic and environmental protection as well are important aspects for the future traffic design of urban areas. To improve the traffic situation the development of new traffic concepts and alternative vehicles are required. The BMW company has developed a new type of two-wheel vehicle. This two-wheeler constitutes a totally new concept. BMW implemented a lot of safety features, such as a structure made up of rollover bars and a crush element instead of a front protecting plate. Furthermore the driver can secure himself with two safety belts. The paper contains a description of the novel two-wheel vehicle concept designed so far. BMW's concept and the safety features are also explained. The Federal Highway Research Institute (BASt) was given the task of assessing the concept as a whole with regard to the active and passive safety and the exemption of the obligation to wear a helmet. The expertise concluded that the BMW two-wheeler concept has a very high safety standard. Some extracts of the expertise, in particular the investigations concerning the exemption of the obligation to wear a helmet are presented. Common legal requirements for the vehicle registration of vehicle concepts similar to the BMW two-wheeler in Germany have been formulated.
Zur Ermittlung einer Mehr- oder Minderbeanspruchung des Straßenoberbaus durch Lang-Lkw wurde eine Stichprobe von 1.746 Fahrten im Direktverkehr und 483 Fahrten im kombinierten Verkehr analysiert. Die durchschnittliche Fahrzeuggesamtmasse der Lang-Lkw betrug 32,3 t. Ca. 9 % der Lang-Lkw fuhren überladen. Das Niveau der Überladungen lag jeweils unterhalb 3 t. Die maximale Achslast betrug 11,7 t. Die Achslastverteilung von Lang-Lkw im kombinierten Verkehr weist ein niedrigeres Niveau als für Lang-Lkw im Direktverkehr auf. Im Vergleich zu äquivalenten konventionellen Lkw ergibt sich für Lang-Lkw eine um 5 % niedrigere Anzahl äquivalenter 10-t-Achsen. Der mittlere Achszahlfaktor fA von Lang-Lkw beträgt 7,40. Das Transportvolumen eines Lang-Lkw entspricht rechnerisch dem Transportvolumen von 1,53 äquivalenten konventionellen Lkw. Mit zunehmendem Anteil Lang-Lkw am Gesamtkollektiv Schwerverkehr (bis zu 9 %) ist eine zunehmende, vergleichsweise geringe Reduzierung der B-Zahl nach RStO 12 zu verzeichnen, was in der Regel jedoch nicht zu einem Wechsel in die nächstkleinere Belastungsklasse führen würde. Mittels Dimensionierung nach RDO Asphalt 09 errechnet sich bei Einsatz von Lang-Lkw nach dem Ende einer 30-jährigen Nutzungsdauer der Straßenbefestigung ein geringfügig niedrigerer Ermüdungsstatus, der zu einer marginalen Verlängerung des Nutzungszeitraums führen würde. Der Einsatz von Lang-Lkw würde unter Einhaltung der im Feldversuch definierten fahrzeugtechnischen Vorgaben und zulässigen Grenzwerte für Fahrzeuggesamtgewichte und Achslasten nicht zur Mehrbeanspruchung des Oberbaus von Straßen führen. Die rechnerisch festgestellte Minderbeanspruchung des Oberbaus im Vergleich zu konventionellen Lkw hat nur marginale Bedeutung und würde sich somit in der Praxis kaum spürbar auf die Nutzungsdauer der Straßen auswirken.
Aus Anlass der schweren Omnibusunfälle im Sommer 1992 hat das Bundesverkehrsministerium die Bundesanstalt für Straßenwesen (BASt) beauftragt, eine Analyse der Gründe dieser Unfälle zu erstellen. Die vorliegende Sonderauswertung der amtlichen Straßenverkehrsunfallstatistik zur Frage der Sicherheit von Bussen unter Einbezug von Exposure-Daten ist Teil des von der BASt vorgelegten Untersuchungskonzepts. Die Anzahl der Busunfälle mit Personenschaden ist in den Alten Bundesländern von 1980 bis 1991 um insgesamt rund 22 Prozent auf 5.111 Busunfälle gesunken. Insgesamt verunglückten im Jahre 1991 bei Busunfällen 8.099 Personen (4.189 Businsassen), davon wurden 134 getötet (darunter 9 Businsassen). Im Jahre 1991 ereigneten sich in den Neuen Bundesländern 888 Busunfälle mit Personenschaden, dabei verunglückten 1.713 Personen (768 Businsassen), davon 110 (17 Businsassen) tödlich. Businsassen reisen vergleichsweise sicher. Das Unfallrisiko für Busse war zwar im gesamten Untersuchungszeitraum überdurchschnittlich hoch (Bus-Unfallrate 1991: 1,28; Gesamt-Unfallrate 1991: 0,69), ist jedoch auf eine sehr hohe Bus-Unfallrate auf Innerortsstraßen zurückzuführen. Das Risiko für Businsassen war dagegen in jeder Ortslage niedriger als das der Gesamtheit der Verkehrsteilnehmer (Bus-Verunglücktenrate: 0,071; Gesamt-Verunglücktenrate: 0,584). Auf den Bundesautobahnen (BAB) der Alten Bundesländer war die Anzahl der Busunfälle mit Personenschaden mit 238 im Jahre 1991 (703 Verunglückte) deutlich höher als im Jahre 1985, auf Landstraßen hingegen lag die Anzahl der Busunfälle und die Anzahl der Verunglückten niedriger. Die häufigste polizeilich genannte Unfallursache beim Busfahrer war "nicht angepasste Geschwindigkeit". Auf Autobahnen war der Anteil der Nachtunfälle von Bussen auffällig hoch. Auswirkungen der politischen Veränderungen in den osteuropäischen Staaten und der deutschen Wiedervereinigung werden in der Untersuchung des Unfallgeschehens im grenznahen Bereich zu den Neuen Bundesländern und der Auswertung der Herkunft unfallbeteiligter Busse deutlich: Im grenznahen Bereich ereigneten sich im Jahre 1991 rund 22 Prozent aller BAB-Unfälle von Bussen (1985: 14 Prozent), der Anteil der nicht in den Alten Bundesländern zugelassenen, dort aber unfallbeteiligten Busse betrug im Jahre 1991 rund 29 Prozent.
Die Untersuchung zum Forschungsprojekt FE 82.0499/2011 "Ausdehnung der Kostentragungspflicht des -§ 25a StVG auf den fließenden Verkehr" befasst sich mit der Thematik einer möglichen Ausdehnung der bislang ausschließlich für den ruhenden Verkehrs geltenden Kostentragungspflicht des -§ 25a StVG auf Verkehrsverstöße im fließenden Verkehr. Dieses Forschungsprojekt hatte die Aufgabenstellung zu erfüllen, aus der Arbeitspraxis der Bußgeldbehörden in den Bundesländern eine für die Ansprüche wissenschaftlicher Auswertungen qualitativ und quantitativ ausreichende Datenmenge zur Bearbeitung digital erfasster Geschwindigkeits-, Rotlicht- und Abstandsverstöße zu erheben. Dieser Gesamtdatenbestand sollte gesammelt, thematisch geordnet und hinsichtlich der einschlägigen Tatbestände sowie der Verfahrenseinstellungen aufbereitet werden. Hauptergebnis der Studie ist: - Bei einer Gesamtanzahl von 10,7 % eingestellter Bußgeldverfahren wird eine Anzahl von 2,5 % Bußgeldverfahren eingestellt, weil bei einem mittels digitaler Messtechnik beweissicher festgestellten Verkehrsverstoß und zweifelsfrei dokumentiertem Kfz-Kennzeichen der Fahrzeugführer trotz mindestens einer Ermittlungsmaßnahme nicht vor Eintritt der Verfolgungsverjährung ermittelt werden konnte.
Recent accident statistics from the German national database state bicyclists being the second endangered group of vulnerable road users besides pedestrians. With 399 fatalities, more than 14.000 seriously injured and more than 61.000 slightly injured persons on german roads in the year 2011, the group of bicyclists is ranked second of all road user groups (Statistisches Bundesamt, 2012). While the overall bicycle helmet usage frequency in Germany is very low, evidence is given that its usage leads to a significant reduction of severe head injuries. After an estimation of the benefit of bicycle helmet usage as well as an appropriate test procedure for bicyclists, this paper describes two different approaches for the improvement of bicyclist safety. While the first one is focusing on the assessment of the vehicle based protection potential for bicyclists, the second one is concentrating on the safety assessment of bicycle helmets. Within the first part of the study the possible revision of the existing pedestrian testing protocols is being examined, using in depth accident data, full scale simulation and hardware testing. Within the second part of the study, the results of tests according to supplemental test procedures for the safety assessment of bicycle helmets developed by the German Federal Highway Research Institute (BASt) are presented. An additional full scale test performed at reduced impact speed proves that measures of active vehicle safety as e.g. braking before the collision event do not necessarily always lead to a reduction of injury severity.
Within this paper different European accident data sources were used to investigate the causations and backgrounds of road traffic accidents with pedestrians. Analyses of high level national data and in-depth accident data from Germany and Great Britain was used to confirm and refine preliminary accident scenarios identified from other sources using a literature review. General observations made included that a high proportion of killed or seriously injured pedestrian casualties impacted by cars were in "dark" light conditions. Seven accident scenarios were identified (each divided into "daylight" and "dark" light conditions) which included the majority of the car front-to-pedestrian crash configurations. Test scenarios were developed using the identified accident scenarios and relevant parameters. Hypothetical parameters were derived to describe the performance of pedestrian pre-crash systems based on the assumption that these systems are designed to avoid false positives as a very high priority, i.e. at virtually all costs. As result, three "Base Test Scenarios" were selected to be developed in detail in the AsPeCSS project. However, further Enhanced Test Scenarios may be needed to address environmental factors such as darkness if it is determined that system performance is sensitive to these factors. Finally, weighting factors for the accident scenarios for Europe (EU-27) were developed by averaging and extrapolation of the available data. This paper represents interim results of Work Package 1 within the AsPeCSS project.
In Germany the number of casualties in passenger car to pedestrian crashes has been reduced by a considerable amount of 40% as regards fatalities and 25% with regard to seriously injured pedestrians since the year 2001. Similar trends can be seen in other European countries. The reasons for that positive development are still under investigation. As infrastructural or behavioral changes do in general take a longer time to be effective in real world, explanations related to improved active and passive safety of passenger vehicles can be more relevant in providing answers for this trend. The effect of passive pedestrian protection " specified by the Euro NCAP pedestrian test result " is of particular interest and has already been analyzed by several authors. However, the number of vehicles with some valid Euro NCAP pedestrian score (post 2002 rating) was quite limited in most of those studies. To overcome this problem of small datasets German National Accident Records have been taken to investigate a similar objective but now based on a much bigger dataset. The paper uses German National Accident Records from the years 2009 to 2011. In total 65.140 records of pedestrian to passenger car crashes have been available. Considering crash parameters like accident location (rural / urban areas) etc., 27.143 of those crashes have been classified to be relevant for the analysis of passive pedestrian safety. In those 27.143 records 7.576 Euro NCAP rated vehicles (post 2002 rating) have been identified. In addition it was possible to identify vehicles which comply with pedestrian protection legislation (2003/102/EG) where phase 1 came into force in October 2005. A significant correlation between Euro NCAP pedestrian score and injury outcome in real-life car to pedestrian crashes was found. Comparing a vehicle scoring 5 points and a vehicle scoring 22 points, pedestrians" conditional probability of getting fatally injured is reduced by 35% (from 0.58% to 0.37%) for the later one. At the same time the probability of serious injuries can be reduced by 16% (from 27.4% to 22.9%). No significant injury reducing effect, associated with the introduction of pedestrian protection legislation (phase 1) was detected. Considerable effects have also been identified comparing diesel and gasoline cars. Higher engine displacements are associated with a lower injury risk for pedestrians. The most relevant parameter has been "time of accident", whereas pedestrians face a more than 2 times higher probability to be fatally injured during night and darkness as compared to daytime conditions.
Proposal for a test procedure of assistance systems regarding preventive pedestrian protection
(2011)
This paper is showing a proposal for a test procedure regarding preventive pedestrian protection based on accident analysis. Over the past years pedestrian protection has become an increasing importance also during the development phase of new vehicles. After a phase of focusing on secondary safety, there are current activities to detect a possible collision by assistance systems. Such systems have the task to inform the driver and/or automatically activate the brakes. How practical is such a system? In which kind of traffic situations will it work? How is it possible to check the effectiveness of such a system? To test the effectiveness, currently there are no generally approved identifiable procedures. It is reasonable that such a test should be based on real accidents. The test procedure should be designed to test all systems, independent of the system- working principle. The vFSS group (advanced Forward-looking Safety Systems) was founded to develop a proposal for a technology independent test procedure, which reflects the real accident situation. This contribution is showing the results of vFSS. The developed test procedure focuses on accidents between passenger cars and pedestrians. The results are based on analysis results of in-depth databases of GIDAS, German insurers and DEKRA and added by analysis of national and international statistics. The in-depth analysis includes many pre-crash situations with several influencing factors. The factors are e. g. speed of the car, speed of the pedestrian, moving direction and a possible obscuration of the pedestrian by an object. The results comprise also the different situations of adults and children. Furthermore, they include details regarding influence of the lighting conditions (daylight or night) especially with respect to the accident consequences. In fact, more accidents happen at daylight, but fatal accidents are more often at night. A clustering of parameter combinations was found which represents typical accident scenarios. There are six typical accident scenarios which were merged in four test scenarios. The test scenarios are varying the starting position of the pedestrian, the pedestrian size (adult or child) and the speed of the pedestrian, whereas the speed of the car will not be varied. To ensure the independency from used sensing technologies it is necessary to use a suitable dummy. For example, if sensors are based on infrared, the dummy should emit the temperature of a human being. The test procedure will identify the collision speed as the key parameter for assessing the effectiveness of the tested system. The collision speed is defined as the reduction between initial test speed of the car and impact speed. The assessment of the speed reduction value regarding the safety benefit, however, will be part of a separate procedure.
New vehicle types are extensively tested to check almost all factors that influence ride and handling. With reference to the Association of German Car Tuners" (VDAT e.V.) valuations, approximately 10% of all cars in Germany are being modified by their owners. 28 % of those modifications" sales are divergent wheel-tire combinations, 13 % are tuning measures on the chassis suspension or wheel spacers. In almost all cases the singular modifications present a general permission for specific vehicles they have been tested in. Combined tuning measures, however, are often checked by just one inspector, following a procedure of mostly subjective assessment criteria. Today, critical attributes are only being observed, in case a vehicle is involved in an accident and the modifications are identified as crash causal factors or as a cofactor on the development of a crash. For the first time, a field study allows a survey of safety affecting chassis modifications. The test layout has to comply with some basic conditions. Different vehicle concepts with a wide margin of modifications are required to get a high transferability of the results. A total amount of more than 150 tested vehicles serves the same purpose. The tests are limited concerning the installation time of measurement techniques and the requirement that no damage, defilement or immoderate wear of the vehicles are accepted by their owners. Due to such factors as well as the driver Ìs acceptance, the vehicles are controlled by its owners instead of robots or test drivers. For keeping down the driver- influence, the lane has narrow boundaries and the driver has to drive in strictly adherence to the given instructions. After gathering all modifications, as well as static and kinematic parameters like the toe and camber angle, dynamic testing of predominantly lateral dynamics is conducted. Besides standardized tests like the ISO 3888-2 (Obstacle Avoidance) or the ISO 14512 (Braking on Surfaces with Split Coefficient of Friction), to test the influence of modified kingpin offsets caused by wheel spacers, some deviant tests are conducted. Those are required due to the demand of objective test results for road tests with vertical induced stimulation of the chassis suspension. Hence, new tests on corner braking with and without vertical stimulation have been developed. The interpretation of data includes thresholds, e.g. the maximum entrance velocity without hitting cones, on the one hand, and the analysis of characteristics of data concerning time and frequency range, "1-second values" and peak response times on the other hand. Besides the thresholds as indicators for the achievable velocities, which are mainly affected by friction coefficients, the vehicle reaction in the course of time characterizes the vehicle reaction in the threshold range and consequently the operational demands on the driver. The field study has started and promises the first long-range analysis of chassis modifications. The results offer a basis for hypothesis and resultant further test layouts for oncoming studies of the identified critical tuning measures.
Safety of light goods vehicles - findings from the German joint project of BASt, DEKRA, UDV and VDA
(2011)
Light goods vehicles (LGVs) are an important part of the vehicle fleet, providing a vital component in the European transportation system. On the other hand, LGVs are in the focus of public discussion regarding road safety. In order to analyse the accident situation of LGVs in an objective manner, Federal Highway Research Institute (BASt), VDA, DEKRA and German Insurers Accident Research (UDV) launched a joint project. The aim of this project, which will be finished by mid of 2011, is to identify reasonable measures which will further improve the safety of LGVs. For the first time, these partners jointly together conducted a research project and put together their know-how in accident research. Analyses are based on real-life accident data from the GIDAS database, the Accident Database of UDV (UDB), the DEKRA database and national statistics. The findings deliver answers to questions within the arena of future legislative actions and consumer protection activities. The analyses of databases cover areas of primary and secondary safety of LGVs with a special focus on advanced driver assistance systems (ADAS), driver behaviour as well as partner and occupant protection. Key figures from national statistics are used to highlight hotspots of accidents of LGVs in Germany. Finally, the proposed countermeasures are assessed regarding their potential effectiveness. Amongst others, the results show that the accident situation of LGVs is very similar to that of passenger cars. Noteworthy variations could be found in collisions with pedestrians, at reversing and regarding accident causes. Occupant safety of LGVs is on a higher level compared to cars. Results indicate that seatbelt use is on a significantly lower level compared to cars. This leads to higher-than-average injury risk for unbelted LGV occupants. When it comes to partner protection, there are problems with compatibility at LGVs. For car occupants there is a very high injury risk when colliding with a LGV. It indicates that higher passive safety test standards for LGVs would be counterproductive if they further increase stiffness of LGVs. The analysis of LGV-pedestrian accidents shows that pedestrian kinematic differs significantly from car-pedestrian accidents. At this point, existing pedestrian related test standards developed for cars cannot be adopted to LGVs. When it comes to active safety, ESC proved its effectiveness once again. Beyond that, rear view cameras, advanced emergency braking systems and lane departure warning systems show a safety potential, too. In addition to any technical countermeasures previously discussed, the importance of the driver behavior and attitude regarding the accident risk was investigated. In order to develop successful actions it is important to understand the main target population. In the case of LGV especially the crafts business and smaller companies are the major contributors the safety issue.
Im Jahr 2004 fand an der Medizinischen Hochschule Hannover die erste ESAR-Konferenz (Expert Symposium on Accident Research) statt. Die Idee einer internationalen Konferenz war aus der Notwendigkeit entstanden, diejenigen Experten zusammen zu bringen, die weltweit tätig sind und Verkehrsunfälle wissenschaftlich analysieren, um ihre Ergebnisse gemeinsam zu diskutieren und einem Zielpublikum von Behördenvertretern, Entwicklungsingenieuren der Automobilindustrie und anderen Wissenschaftlern darzubringen. Die durch Professor Otte initiierte und nun zum vierten Male organisierte Konferenz fand eine breite Akzeptanz und ist mittlerweile Bestandteil einer Konferenzlandschaft mit Zielvorträgen von der Fahrzeugsicherheit bis hin zur Verletzungsanalyse und den Unfallursachen. ESAR kann als wissenschaftliches Kolloquium und Plattform für einen Informationsaustausch der Unfallforscher angesehen werden, die sich speziell mit Methoden der Unfalluntersuchung, mit Verletzungsmechanismen und der Bewertung von Verletzungen, Unfallursachen und anderen Bereichen der statistischen Unfalldatenanalyse befassen. Experten aus den Bereichen der Medizin, der Verkehrspsychologie und der Technik sowie Vertreter zuständiger Behörden kommen hier zusammen, um die Erfahrungen in der Unfallprävention und der Unfallrekonstruktion zu diskutieren und um der Forschung neue Felder zu eröffnen. Neben den Belangen der Europäischen Gemeinschaft werden auch die weltweit zu registrierenden hohen Verletztenzahlen berücksichtigt. Wissenschaftliche Vorträge aus aller Welt tragen dazu bei, geeignete Maßnahmen und Methoden zur Analyse und drastischen Verringerung der Zahl der bei Verkehrsunfällen Getöteten zu entwickeln. Die Zusammensetzung des Teilnehmerkreises dieser wie früherer ESAR-Konferenzen hat längst eine über Europa hinausgreifende Internationalitaet erreicht und bietet daher einen aufschlussreichen Überblick über die verschiedenen Standards bestehender Verkehrssicherheit und unterschiedlichen Unfallszenarien und über die Anforderungen an die Unfallanalysen. Die Ergebnisse langjähriger Forschungsarbeiten in Europa, USA, Australien und asiatischen Ländern beinhalten unterschiedliche infrastrukturelle Zusammenhänge und geben Erkenntnisse über Population, Fahrzeugbestand und Fahrereigenschaften. Derartige Informationen bilden eine exzellente Basis für abzuleitende Empfehlungen und Maßnahmen für die Erhöhung der Verkehrssicherheit international.
The role of a national motor vehicle crash causation study-style data set in rollover data analysis
(2010)
On 1 January 2005, The National Highway Traffic Safety Administration, an agency of the United States Department of Transportation, implemented a new data collection strategy designed to assess crash avoidance technologies and report associated behavioral inputs and outcomes. The original goal was a six-year program, however, during the shortened data collection period; it proved a valuable resource for understanding a precrash environment previously obscured by forensic case investigation. Another unintended consequence was an overlap with infrastructure, roadway geometry, and design with the occupant and vehicle outcomes, by virtue of well-defined attributes. External to the collected data, supplementary information was extrapolated, by using manuals published in the United States, by the American Association of State Highway Transportation Officials and selected State Departments of Transportation, in conjunction with the National Motor Vehicle Crash Causation Study (NMVCCS). This provided a backdrop to the infrastructure framework of the rollover problem within which the occupant and vehicle outcomes were studied. If a NMVCCS-style data collection were to be implemented elsewhere, then complementary manuals produced by federal transportation officials might be consulted producing similar relationships. The current study uses NMVCCS data to describe vehicles travelling through diverse design geometries and the outcome for occupants involved in crashes within that system. Codified and extrapolated data form the basis for assessing NMVCCS and its value to the transportation safety community, as the protocols are applicable universally. The benefit in continuing a NMVCCS-style study is noted, as the interaction of roadway infrastructure and occupant protection agencies might find paths to better work together in solving the complex rollover problem using a common data-driven approach.
The overall purpose of the ASSESS project is to develop a relevant and standardised set of test and assessment methods and associated tools for integrated vehicle safety systems, primarily focussing on currently available pre-crash sensing systems. The first stage of the project was to define casualty relevant accident scenarios so that the test scenarios will be developed based on accident scenarios which currently result in the greatest injury outcome, measured by a combination of casualty severity and casualty frequency. The first analysis stage was completed using data from a range of accident databases, including those which were nationally representative (STATS19, UK and STRADA, SE) and in-depth sources which provided more detailed parameters to characterise the accident scenarios (GIDAS, DE and OTS, UK). A common analysis method was developed in order to compare the data from these different sources, and while the data sets were not completely compatible, the majority of the data was aligned in such a way that allowed a useful comparison to be made. As the ASSESS project focuses on pre-crash sensing systems fitted to passenger cars, the data selected for the analysis was "injury accidents which involved at least one passenger car". The accident data analysis yielded the following ranked list of most relevant accident scenarios: Rank Accident scenario 1 Driving accident - single vehicle loss of control 2 Accidents in longitudinal traffic (same and opposite directions) 3 Accidents with turning vehicle(s) or crossing paths in junctions 4 Accidents involving pedestrians The ranked list highlights the relatively large role played by "accidents in longitudinal traffic", and "accidents with turning vehicle(s) or crossing paths in junctions" (the second and third most prevalent accident scenarios, respectively). The pre-crash systems addressed in ASSESS propose to yield beneficial safety outcomes with specific regard to these accident scenarios. This indicates that the ASSESS project is highly relevant to the current casualty crash problem. In the second stage of the analysis a selection of these accident scenarios were analysed further to define the accident parameters at a more detailed level .This paper describes the analysis approach and results from the first analysis stage.
This work aims at bringing evidence for mass incompatibility in frontal impact for cars built according to the UNECE R94 regulation. French national injury accidents database census for years 2005 to 2008 were used for the analysis. The heterogeneity of frontal self-protection among cars of different masses is investigated, as well as the partner protection parameter offered by these cars. The last part of the analysis deals with the estimation of the benefit, in terms of fatal and severe injuries avoided, if crashworthiness was harmonized for the whole fleet of vehicle. This calculation is done for France and is extended to all Europe.
Estimation of the benefits for the UK for potential options to modify UNECE Regulation No. 95
(2010)
The side impact problem in Europe remains substantial. UK data shows that between 22% and 26% of car occupant casualties are involved in a side impact, but this rises to between 29% and 38% for those who are fatally injured. This indicates the more injurious nature of side impacts compared with frontal impacts. The European Enhanced Vehicle safety Committee (EEVC) has performed work to address the side impact issue since 1979. As part of its continuing work, it has recently investigated potential options for regulatory changes to improve side impact protection in cars further. To support this work the UK undertook an analysis to estimate the benefit for potential options to modify UNECE Regulation 95. The analysis used the UK national STATS19 and detailed Co-operative Crash Injury Study (CCIS) accident databases. Of the potential options reviewed, it was found that the addition of a pole test offered the greatest benefit.
Since 2005, the motorcycle crash fatalities in the US exceeded 10% of the overall annual traffic fatalities. Consequently, it has become critical to gain in-depth understanding of the factors and characteristics contributing to motorcycle crashes. Unfortunately, there currently exists no database gathering the necessary information for an in-depth analysis of the US motorcycle crashes. So this study utilizes the NASS/CDS database (National Automotive Sampling System, Crashworthiness Data System) in order to gain insights into the patterns and factors leading to a NASS/CDS motorcycle crash, from 1997 to 2007. NASS/CDS samples about 5,000 passenger car tow-away crashes per year. Each case includes photographs and detailed data on crash and pre-crash characteristics, vehicle types, trajectories, types of impact, and other pertinent roadway and crash scene information, allowing an in-depth investigation of the crash mechanisms. However, the NASS/CDS sampling process specifically focuses on passenger car crashes, so the cases extracted only correspond to crashes in which a passenger vehicle was towed, and a motorcycle was somehow involved. Thus, a by-hand in-depth review of about 200 cases allowed retrieving 106 relevant crashes for this study, tending to represent the severe passenger vehicle(s) versus motorcycle(s) crashes on US roads. The findings lead to the conclusion that these crashes mostly result from the low conspicuity of the motorcycle, and from the inability of the car drivers to fully appreciate and anticipate the behavior of a motorcycle. Indeed, it has been shown that, first, the car drivers involved in these cases did not attempt any avoidance maneuver, second, they were largely of ages under 25, and finally, the majority of the crashes were in an intersection scenario. In addition, the two major scenarios unveiled were the car attempting a left turn from the opposite direction and the car attempting a left turn from the right. The paper mentions several solutions to enhance the motorcycle- conspicuity and to allow the car drivers to better anticipate its behavior, which seem to be key factors in the intersection-related crashes (and more generally in the passenger vehicle(s) versus motorcycle(s) crashes).
The share of high-tensile steel in car bodies has increased over the last years. While occupant safety has generally benefited from this measure, there is a potential risk that, as a result, rescue time may increase considerably. In more than 60% of all car occupant fatalities a technical rescue has been necessary. These are in particular those cases where occupants die immediately at the accident scene. Therefore, in these cases "rescue time" is a very sensitive parameter. In addition to the general analysis of the need of technical rescue and the actual rescue time depending on model years, the injury pattern of occupants requiring technical rescue will be analysed to provide advice for rescue teams. Furthermore, a detailed analysis of rescue measures for the most popular car models depending on the safety cell design is given.
This study that was funded by the Research Association for Automotive Technology (FAT) develops a method for the evaluation of the placement of tanks or batteries by using the deformation frequencies in real-world accidents. Therefore, the deformations of more than 20.000 passenger cars in the GIDAS database are analysed. For each vehicle a contour of deformation is calculated and the deformed areas of the vehicles are transferred in a rangy matrix of deformation. Thereby, the vehicle is divided into more than 190.000 cells. Afterwards, all single matrices of deformation are summarized for each cell which allows representative analyses of the deformation frequencies of accidents with passenger cars in Germany. On the basis of these deformation frequencies it is possible to determine least deformed areas of all passenger cars. Furthermore, intended placements of tanks or batteries can be estimated in an early stage of development. Therefore, all vehicles with deformations in the intended tank areas can be analysed individually. Considering numerous parameters out of the GIDAS database (e.g. collision speed, kind of accident, overlap, collision partner etc.) the occurring forces can be calculated or the deformation frequency can be estimated. Furthermore, it is possible to consider the influence of primary and secondary safety systems on the deformation behaviour. The analysis of "worst case accident events" is an additional application of the calculated matrix of deformation frequency.
The NHTSA-sponsored Crash Injury Research and Engineering Network (CIREN) has collected and analyzed crash, vehicle damage, and detailed injury data from over 4000 case occupants who were patients admitted to Level-I trauma centers following involvement in motor vehicle crashes. Since 2005, CIREN has used a methodology known as "BioTab" to analyze and document the causes of injuries resulting from passenger vehicle crashes. BioTab was developed to provide a complete evidenced-based method to describe and document injury causation from in-depth crash investigations with confidence levels assigned to the causes of injury based on the available evidence. This paper describes how the BioTab method is being used in CIREN to leverage the data collected from in-depth crash investigations, and particularly the detailed injury data available in CIREN, to develop evidence-based assessments of injury causation. CIREN case examples are provided to demonstrate the ability of the BioTab method to improve real-world crash/injury data assessment.
Small overlap frontal crashes are defined by a damage pattern with most of the vehicle deformation concentrated outboard of the main longitudinal structures. These crashes are prominent among frontal crashes resulting in serious and fatal injuries, even among vehicles that perform well in regulatory and consumer information crash tests. One of the critical aspects of understanding these crashes is knowing the crash speeds that cause the types of damage associated with serious injuries. Laboratory crash tests were conducted using 12 vehicles in three small overlap test conditions: pole, vehicle-to-vehicle collinear, and vehicle-to-vehicle oblique (15-degree striking angle). Field reconstruction techniques were used to estimate the delta V for each vehicle, and these results were compared with actual delta V values based on vehicle accelerometer data. Estimated delta Vs were 50% lower than actual values. Velocity change estimates for small overlap frontal crashes in databases such as NASS-CDS significantly underestimate actual values.
In India, heavy truck crashes on national highways account for a number of fatalities. But due to lack of in-depth crash data, detailed analysis is not possible to determine injury mechanisms, and to identify infrastructure, vehicle and human factors affecting these crashes. Over the past two years, researchers in India have established a crash investigation network, with the co-operation of the police and hospitals, to conduct crash investigations and in-depth crash data collection on national highways in the state of Tamil Nadu. This pioneering effort has resulted in the development of a heavy truck crash investigation methodology, the outcome of which is scientific and reliable crash data that has been able to provide good insight into truck crashes and their causes. This paper explains the need for truck crash investigations, the methodology, conclusions of the data analyzed up to date, and the need to focus on truck driver working conditions.
Aim of the study was to evaluate the protective effect of bicycle helmets particularly considering injuries to the head and to the face. Accidents with the participation of bicyclists which occurred from 2000 to 2007 were chosen from GIDAS. We observed that injuries to the head and face were more severe in the group of non-helmeted riders. There seems to be no significant difference in injuries with AIS 3-6. Altogether 26 cyclists were killed. 2 of them wore a helmet (1% of helmeted cyclists), 24 did not (1% of non-helmeted cyclists). Only one killed rider (without helmet) did not suffer from polytrauma (only head injuries recorded). The findings seem to support the thesis of a preventive effect of the bicycle helmet, however the two groups are different in their characteristics related to riding speed. Necessarily we need a multivariate model to evaluate the effect of helmets.
In order to enable foreseeing or comparing the benefit of safety systems or driver assistance systems in Germany, in the United States and in Japan, the traffic accident databases in those three countries are examined. The variables used are culpable party, collision partner, accident type, and injury level and the method to re-classify the databases for comparison are proposed. The result indicates that single passenger car fatality is the most frequent in Germany and in the United States, while passenger car vs. pedestrian is the most frequent fatality scenario in Japan. When the casualty by fatality ratio is focused, the greatest difference is observed in rear-end collisions. The ratio of slight injuries in Japan yields about eighteen times as many as those in Germany, and about eight times as many as those in the United States.
An eCall device has been mounted on some vehicles in France since 2003. It is an integrated car radio/GSM/GPS system that can be used with a SIM card. When an accident occurs, a call can be sent manually or automatically made to a telephone call centre. Knowing the geographic location, the vehicle identity and the possibility of a direct communication with the people involved enables the nearest emergency services to be called out. In this context, the LAB / CEESAR have set up a study aimed at evaluating the effectiveness of this system. The purpose of this paper is to detail the E-call system evaluation method of effectiveness used and give a global synthesis of the results.
The aim of this study was to evaluate the performance and accuracy of Event Data Recorders (EDRs). The analysis was based on J-NCAP crash tests from 2006"2007, with the corresponding EDR datasets. The pre-crash velocity, maximum delta-V and delta-V versus time history data recorded in the EDRs were compared with the reliable crash test data. The difference between the EDR pre-crash velocity and the laboratory test speed was less than 4 percent. In contrast, in several cases the maximum delta-V and delta-V versus time history data obtained from the EDRs showed uncertainty of measurement in comparisons with the reliable delta-V data. The difference in maximum delta-V in these comparisons was more than 5 percent in 10 of 14 tests and more than 10 percent in 4 of 14 tests. The EDRs underestimated the maximum delta-V in almost all tests. It was also concluded that the calculated acceleration from the EDR delta-V versus time history data showed good agreement with the instrumented accelerometer signal during the collision in almost all tests.
The bicyclist accidents were analyzed to get better understanding of the occurrences and frequency of the accidents, injury distributions, as well as correlation of injury severity/outcomes with engineering and human factors in two different countries of China and Germany. The accident cases that occurred from 2001 to 2006 were collected from IVAC database in Changsha and GIDAS database in Hannover. Based on specified sampling criteria, 1,570 bicyclist cases were selected from IVAC database in Changsha, and 1806 cases were collected from Hannover, documented in GIDAS database. Statistical analyses were carried out by using these selected data. The results from the statistical analysis are presented and discussed in this study.
One of the major problems of road safety in Europe is the powered two wheelers accidents. One of the European countries with one of the highest rates is Portugal where in 2006, mopeds and motorcycles fatalities represented 27% of all road users deaths. In this work, a deep analysis and overview of the current state of mopeds and motorcycles accidents for the 2004-2006 period is presented. Within this period 830 PTW occupants die, 2958 have been severely injured and 25000 suffer slight injuries. A detailed analysis of the conditions of these accidents has been carried out, using the data of the national accident database. This analysis provides global information, about geographic environmental conditions, driver- characteristics among others. From this data detailed information is obtained allowing to know when, where and who. In order to answer the question why more a widely collection of data has been collect for 70 accidents. The data has been collected using OECD methodology. For these accidents a detailed reconstruction has been carried out, what is especially important for fatal accidents where for instance speed in an important factor. From these collection and analysis of data a wider overview of facts and measures are extracted. Among them, some are emphasized such as that the quality and non-use of helmets plays an important role in severe and fatal accidents especially for accidents involving moped vehicles, or speed is the most important factor in fatal accidents involving motorcycles. Concerning motorcycle accident reconstruction, different tools can be used depending of the accident scenario and complexity. For simple cases, with specific characteristics, analytical formulation based in vehicle crash dynamics can be use in order to determine the impact speed of the vehicles impact, analysing the skid marks, deformations, victims rest position and considering parameters (EES, vehicle deceleration, etc). Aspects such as the energy absorption capability of motorcycles are also discussed. In the general cases the accident reconstruction software Pc-Crash has been used for the reconstruction of the accident. In very complex cases, has for instance the impact between motorcyclist and barriers, Madymo software is used especially to determine speed from injuries. An example of the impact of a motorcyclist and a motorcyclist-friendly barrier is present to illustrate the benefits and limitations of such systems.
In Germany averagely two million traffic accidents happen each year and emergency medical services are called to more than 400 000 patients. Even though this number is decreasing continuously (due to improvements in the fields of vehicle safety, road construction, and accident prevention) every case is yet a challenge for the rescuers and requires improvements in emergency medicine as well. Especially during diagnostics right at the accident scene, there are only limited instruments available to gain the necessary knowledge of the injuries suffered, to come to essential decisions about treatment or transport. To provide an additional diagnostic aid by scouting and estimating the situation, a software-tool calculating the likeliness of the most frequent severe injuries (AIS 3-6) of front occupants in passenger cars has been developed to deliver this necessary information about particular accident scenarios. To achieve this, logistic likelihood functions have been calculated in a multivariate regression analysis analysing all AIS 3+ injuries in the GIDAS database of the years 1999-2006 that happened more than four times
Crash involvement studies using routine accident and exposure data : a case for case-control designs
(2009)
Fortunately, accident involvement is a rare event: the chance of an individual road user trip to end up in a crash is close to zero. Thus, according to general epidemiological principles one can expect the case-control study design to be especially suitable for quantifying the relative risk (odds ratio) of accident involvement of road users with a certain risk factor as compared to road users that do not have this characteristic. Ideally, of course, the database for such a case-control study should be established by drawing two independent random samples of cases (accidental units) and controls (nonaccidental units), respectively. If, however, special data collection is not an option, it is nevertheless possible to analyze routine accident and exposure data under a case-control design in order to fully exploit the information contained in already existing databases. As a prerequisite, accident and exposure data from different sources are to be combined in a single file of micro or grouped data in a way consistent with the case-control study design. Among other things, the proposed methodological approach offers the possibility to use in-depth data of the GIDAS type also in investigations of active vehicle safety by combining this data with appropriate vehicle trip data collected in mobility surveys.
Nowadays, traffic accidents are recorded in historical databases. Regarding the huge quantity of data, the use of data mining tools is essential to help Experts, for automatically extracting relevant information in order to establish and quantify relations between severity and potential factors of accidents. An innovative approach is here proposed for an in depth investigation of real world accidents data base. Mutual information ratio based on conditional entropies is used to quantity the association strength between an accident outcome descriptor (injury severity) and other potential association factors. Information theoretic methods help to select automatically groups of factors mostly responsible of the severity of accident.
A lot of factors are related to a road traffic accident; particularly human factors such as road use characteristic, driving maneuver characteristic and safety attitude are the major ones. As a random factor is also included, so it is necessary to minimize the contribution of a random factor to identify human factors related to a road traffic accident. There are several standpoints for traffic accident analysis, such as vehicle-based, location-based and driver-based. And it is effective to analyze driver-based traffic accident data for discussion on the relation between human factors and accidents. An integrated traffic accident database system was developed for analysis considering driver- accident and violation records by ITARD, and several studies were carried out for the evaluation. Useful data for discussion on the relation between types of collision and traffic violations, and the effect of accident experience to the following accident were obtained.
The purpose of this work is to investigate the association between the injuries in motorcycle accident and the main accident configurations. The data were provided by a multicentric case-control study MAIDS regarding the risk of crash and injuries of motorcyclists. Chi-square test was used to evaluate the relationship between the variables and a logistic regression was performed to evaluate the association of injury severity with some variables supposed to be predictive factors. Lesive patterns characterized by internal haemorrhages are mainly associated with fronto-lateral crashes, above all in urban areas. Lacerations or abrasions, mainly reported in torso and lower extremities, are mostly associated with single crashes or accidents in queue also for crashes occurred to low speed (< 50 km/h). The severity of injuries is highly associated with impact speed, regardless of the crash configuration. Fractures and haemorrhages play an important role in determining the severity of injuries. The upper extremities are the most frequently traumatised anatomic areas.
Novice drivers are at high risk for crash involvement. We performed an analysis of causations, injury patterns and distributions of novice drivers in cars and on motorcycles in road traffic as a basis for proper measurements. Method Data of accident and hospital records of novice drivers (licence < 2 years) were analysed focusing the following parameters: injury type, localisation and mechanism, Abbreviated Injury Scale (AIS), maximum AIS (MAIS), delta-v, collision speed and other technical parameters and have been compared to those of experienced drivers. In 18352 accidents in the area of Hannover (years1985"2004), 2602 novice drivers and 18214 experienced drivers were recorded having an accident. Novice car drivers were more often and severe injured than experienced and on motorcycles the experienced riders were at higher risk. Novice drivers of both groups sustained more often extremity injuries. 4.5 % novice car drivers were not restraint compared to 3.7 % of the experienced drivers and 6.1 % novice motorcycle drivers did not wear a proper helmet (versus 6.5 %). Severe injuries sustained at a rate of 20 % at collision speeds below 30 km/h and in 80% at collision speeds above 50 km/h. Novice car drivers drove significant older cars. The risk profile of novice drivers is similar to those of drivers older than 65 years. Structural protection and special lectures like skidding courses could be proper remedial action next to harder punishment of violations.
Pedestrian accidents are one of the major concerns related with road accidents around the world. Portugal has one of the highest rates of pedestrian fatalities in Europe. In this paper an overview conditions were the pedestrian accidents occurred in Portugal is presented. In the last years, a project related with the pedestrian accidents has run in Portugal for the period 2004-2006 where 603 people died, 2097 have been severely injured and about 17000 slightly injured. Within this project all the pedestrian accidents in this period have been analysed providing global information about a wide range of aspects, since location, driver and pedestrian characteristics, weather and road conditions, among others. In addition, 50 in-depth accidents have been investigated and the data collected according the Pendant methodology. For this in-depth methodology detailed information about the accident has been collected, including injuries, vehicle damage, road conditions and road user- behaviour and actions. An accident reconstruction has been carried for each case including the determination of the speeds and driver actions, and the analysis of the contributing factors for the accident. Depending of the accident complexity, different methodologies have been used to analyse these accident, from the classical analytical equations such as Simms and Woods, to the use of detailed computational pedestrian models as those included in the commercial software- PC-Crash-® or Madymo-®. Also one of the goals of our investigation is the development of multibody models and methodologies for the reconstruction of pedestrian accidents. Some of these tools integrated in the commercial software Cosmos Motion-® are presented. The advantages of the different approaches are compared and discussed for some of the accidents investigated. With these tools the impact speed can be determined from the projection distance with analytical tools or PC-Crash-®, but more complex tools should be used to determine speed from the injuries, what is especially important for fatal accidents. The influence of the vehicle geometry and stiffness characteristics is another aspect analysed, where the influence of the vehicle stiffness has been determined using a combined multibody-finite elements approach within the software Madymo-®.
The national accident statistics demonstrate that the situation of passenger car side impacts is dominated by car to car accidents. Car side to pole impacts are relatively infrequent events. However the importance of car side to pole impacts is significantly increasing with fatal and seriously injured occupants. For the present study the German in-depth database GIDAS (German In-Depth-Accident Study) and the UK based database CCIS (Co-operative Crash Injury Study) were used. Two approaches were undertaken to better understand the scenario of car to pole impacts. The first part is a statistical analysis of passenger car side to pole impacts to describe the characteristics and their importance relevant to other types of impact and to get further knowledge about the main factors influencing the accident outcome. The second part contains a case by case review on passenger cars first registered 1998 onwards to further investigate this type of impact including regression analysis to assess the relationship between injury severity and pole impact relevant factors.
While many medical studies have dealt with the incidence, nature and treatment of polytrauma the injury-causing accident mechanisms are rarely discussed in detail, mostly due to the lack of documentation of the technical aspects. The present prospective study was started in late 2007 and collects data from traffic accidents with most severely injured in six south- German counties and two larger cities for the duration of one year. It is aimed at identifying and documenting all polytrauma cases (ISS ≥ 16) caused by traffic accidents and their crash circumstances. The data collection is based on an interdisciplinary concept to include both the police, emergency dispatch centers, hospitals and fire departments in the region and is completely anonymous. Potentially relevant cases where an emergency physician was called to the scene of a traffic accident are provided by the dispatch center. All three hospitals in the region suited for the treatment of polytraumatised patients record injuries, major diagnostic and surgery data. Data and images from the accident scene are provided by the police and by fire departments. The latter provide information which is usually not available from the police, like deployed airbags, vehicle extrication measures and detailed views of car interiors. The main objective of the study is to determine the structure of road users who sustain a polytrauma, their crash opponents and the injury patterns found in relation to the collision configuration and the protection by seat belts, air bags and other devices. With detailed documentation of vehicle damage and extrication measures the study is also intended to support the development of injury predictors for pre-hospital treatment and provide field data regarding further improvement of technical rescue.
The aim of this study is to investigate the differences in car occupant injury severity recorded in AIS 2005 compared to AIS 1990 and to outline the likely effects on future data analysis findings. Occupant injury data in the UK Cooperative Crash Injury Study Database (CCIS) were coded for the period February 2006 to November 2007 using both AIS 1990 and AIS 2005. Data for 1,994 occupants with over 6000 coded injuries were reviewed at the AIS and MAIS level of severities and body regions to determine changes between the two coding methodologies. Overall there was an apparent general trend for fewer injuries to be coded at the AIS 4+ severity and more injuries to be coded at the AIS 2 severity. When these injury trends were reviewed in more detail it was found that the body regions which contributed the most to these changes in severity were the head, thorax and extremities. This is one of the first studies to examine the implications for large databases when changing to an updated method for coding injuries.
Today, Euro NCAP is a well established rating system for passive car safety. The significance of the ratings must however be evaluated by comparison with national accident data. For this purpose accidents with involvement of two passenger cars have been taken from the German National Road Accident Register (record years 1998 to 2004) to evaluate the results of the NCAP frontal impact test configuration. Injury data from both drivers involved in frontal car to car collisions have been sampled and have been compared, using a "Bradley Terry Model" which is well established in the area of paired comparisons. Confounders " like mass ratio of the cars involved, gender of the driver, etc. " have been accounted for in the statistical model. Applying the Bradley Terry Model to the national accident data the safety ranking from Euro NCAP has been validated (safety level: 1star <2 star <3 star <4 star). Significant safety differences are found between cars of the 1 and 2 star category as compared to cars of the 3 and 4 star category. The impact of the mass ratio was highly significant and most influential. Changing the mass ratio by an amount of 10% will raise the chance for the driver of the heavier car to get better off by about 18%. The impact of driver gender was again highly significant, showing a nearly 2 times lower injury risk for male drivers. With regard to the NCAP rating drivers of a high rated car are more than 2 times more probable (70% chance) to get off less injured in a frontal collision as compared to the driver of a low rated car.
In recent years special attention has been paid to reducing the number of fatalities resulting from road traffic accidents. The ambitious target to cut in half the number of road users who are killed each year by 2010 compared with the 2001 figures, as set out in the European White Paper "European Transport Policy for 2010: Time to Decide" implies a general approach covering all kinds of road users. Much has been achieved, e.g. in relation to the safety of car passengers and pedestrians but PTW accidents still represent a significant proportion of fatal road accidents. More than 6,000 motorcyclists die annually on European roads which amounts to 16% of the EU-15 road fatalities. The European Commission therefore launched in 2004 a Sub- Project dealing with motorcycle accidents within an Integrated Project called APROSYS (Advanced PROtection SYStems) forming part of the 6th Framework Programme. In a first step, the combined national statistical data collections of Germany, Italy, the Netherlands and Spain were analysed. Amongst other things parameters like accident location, road conditions, road alignment and injury severity have been explored. The main focus of the analysis was on serious and fatal motorcycle accidents and the results showed similar trends in all four countries. From these results 7 accident scenarios were selected for further investigation via such in-depth databases as the DEKRA database, the GIDAS 2002 database, the COST 327 database and the Dutch element of the MAIDS database. Three tasks, namely the study of PTW collisions with passenger cars, PTW accidents involving road infrastructure features, and motorcyclist protective devices have been assessed and these will concentrate inter alia on accident causes, rider kinematics and injury patterns. A detailed literature review together with the findings of the in-depths database analysis is presented in the paper. Conclusions are drawn and the further stages of the project are highlighted.
Empirical vehicle crashworthiness studies are usually based on national or in-depth traffic accident surveys: Data on accident-involved cars/drivers are analysed in order to quantify the chance of driver injury and to assess certain risk factors like car make and model. As the cars/drivers involved in the same accident form a "cluster", where the size of the cluster equals the number of accident-involved parties, traffic accident survey data are typical multi-level data with accidents as first-level or primary and cars/drivers as secondlevel or secondary units (car occupants in general are to be considered as third level units). Consequently, appropriate statistical multi-level models are to be used for driver injury risk estimation purposes as these models properly account for the cluster structure of traffic accident survey data. In recent years various types of regression models for clustered data have been developed in the statistical sciences. This paper presents multi-level statistical models, which are generally applicable for vehicle crashworthiness assessment in the sense that data on single and multiple car crashes can be analysed simultaneously. As a special case of multi-level modelling driver injury risk estimation based on paired-by-collision car/driver data is considered. It is demonstrated that assessment results may be seriously biased, if the cluster structure inherent in traffic accident survey data is erroneously ignored in the data analysis stage.
Internationally, the need is expressed for harmonized traffic accident data collection (PSN, PENDANT, etc.). Together with this effort of harmonization, traffic accident investigation moves more and more in the direction of accident causation. As current methods only partly address these needs, a new method was set up. The main characteristics of this method are: • Accident/injury causation (associated) factors can objectively be identified and quantified, by comparison with exposure information from a normal population. • All relevant accident and exposure data can be included: human-, vehicle-, and environmental related data for the pre-crash, crash and postcrash situation (the so-called Haddon matrix). The level of detail can be chosen depending on interest and/or budget, which makes the method very flexible. In this paper the accident collection and control group method are presented, including some of the achieved results from a pilot study on 30 truck accidents and 30 control locations. The data were analyzed by using cross-tabulations and classification-tree analysis. The method proved useful for the identification of statistically significant causational aspects.