Abteilung Fahrzeugtechnik
Filtern
Erscheinungsjahr
Dokumenttyp
- Konferenzveröffentlichung (97)
- Buch (Monographie) (49)
- Wissenschaftlicher Artikel (45)
- Arbeitspapier (13)
- Teil eines Buches (Kapitel) (5)
Sprache
- Englisch (106)
- Deutsch (101)
- Mehrsprachig (2)
Schlagworte
- Safety (77)
- Sicherheit (76)
- Fahrzeug (57)
- Vehicle (57)
- Bewertung (51)
- Deutschland (46)
- Germany (46)
- Anfahrversuch (45)
- Evaluation (assessment) (45)
- Impact test (veh) (42)
- Versuch (42)
- Test (40)
- Test method (38)
- Prüfverfahren (37)
- Conference (34)
- Konferenz (34)
- Unfall (32)
- Accident (30)
- Fußgänger (30)
- Pedestrian (30)
- Driver assistance system (27)
- Fahrerassistenzsystem (27)
- Forschungsbericht (27)
- Verletzung (27)
- Injury (26)
- Car (25)
- Research report (25)
- Dummy (22)
- Simulation (22)
- Anthropometric dummy (21)
- Pkw (21)
- Collision (20)
- Frontalzusammenstoß (20)
- Messung (20)
- Head on collision (19)
- Measurement (19)
- Zusammenstoß (18)
- Driver (17)
- Driver information (17)
- Fahrer (17)
- Fahrerinformation (17)
- Fahrzeugführung (17)
- Gesetzgebung (17)
- Kompatibilität (17)
- Legislation (17)
- Method (17)
- Passives Sicherheitssystem (17)
- Verfahren (17)
- Compatibility (16)
- Head (16)
- Kopf (16)
- Passive safety system (16)
- Analyse (math) (15)
- Analysis (math) (15)
- Europa (15)
- Europe (15)
- Biomechanik (14)
- Driving (veh) (14)
- Shock (14)
- Unfallverhütung (14)
- Accident prevention (13)
- Biomechanics (13)
- Child (13)
- Development (13)
- Entwicklung (13)
- Improvement (13)
- Insasse (13)
- Kind (13)
- Radfahrer (13)
- Research project (13)
- Schlag (13)
- Schweregrad (Unfall, Verletzung) (13)
- Vehicle occupant (13)
- Verbesserung (13)
- injury) (13)
- Ausrüstung (12)
- Equipment (12)
- Forschungsarbeit (12)
- Lkw (12)
- Lorry (12)
- Motorrad (12)
- Severity (accid, injury) (12)
- Technische Vorschriften (Kraftfahrzeug) (12)
- Verletzung) (12)
- Wirtschaftlichkeitsrechnung (12)
- Automatic (11)
- Automatisch (11)
- Cost benefit analysis (11)
- Cyclist (11)
- Motorcycle (11)
- Perception (11)
- Prevention (11)
- Schweregrad (Unfall (11)
- Standardisierung (11)
- Vehicle regulations (11)
- Wahrnehmung (11)
- Active safety system (10)
- Aktives Sicherheitssystem (10)
- Behaviour (10)
- Communication (10)
- Elektronische Fahrhilfe (10)
- Kommunikation (10)
- Leistungsfähigkeit (allg) (10)
- Seitlicher Zusammenstoß (10)
- Severity (accid (10)
- Side impact (10)
- Statistik (10)
- Technologie (10)
- Technology (10)
- Verhalten (10)
- Autonomes Fahren (9)
- Autonomous driving (9)
- Belastung (9)
- Bemessung (9)
- Decrease (9)
- Design (overall design) (9)
- EU (9)
- Efficiency (9)
- Electronic driving aid (9)
- Ergonomics (9)
- Fahrstabilität (9)
- Geschwindigkeit (9)
- Load (9)
- Reifen (9)
- Speed (9)
- Tyre (9)
- Vehicle handling (9)
- Verminderung (9)
- Bremsung (8)
- Brustkorb (8)
- Error (8)
- Fahrzeuginnenraum (8)
- Fehler (8)
- Interior (veh) (8)
- Safety belt (8)
- Sicherheitsgurt (8)
- Standardization (8)
- Thorax (8)
- Traffic (8)
- Verhütung (8)
- Verkehr (8)
- Verkehrssteuerung (8)
- Braking (7)
- Knee (human) (7)
- Motorcyclist (7)
- Motorradfahrer (7)
- Prüfstand (7)
- Richtlinien (7)
- Risiko (7)
- Risk (7)
- Specifications (7)
- Statistics (7)
- Test rig (7)
- Traffic control (7)
- Aufprallschlitten (6)
- Collision avoidance system (6)
- Crash helmet (6)
- Datenbank (6)
- Deformation (6)
- Deformierbare Barriere (Anpralltest) (6)
- Emission (6)
- Ergonomie (6)
- Fatality (6)
- Fuel consumption (6)
- Gewicht (6)
- Impact sled (6)
- Impact test (6)
- Intelligent transport system (6)
- Kraftstoffverbrauch (6)
- Lenken (Fahrzeug) (6)
- Modification (6)
- Norm (tech) (6)
- Reaction (human) (6)
- Reaktionsverhalten (6)
- Schutzhelm (6)
- Specification (standard) (6)
- Steering (process) (6)
- Telematics (6)
- Telematik (6)
- Tödlicher Unfall (6)
- Warning (6)
- Weight (6)
- Airbag (5)
- Alte Leute (5)
- Antikollisionssystem (5)
- Auffahrunfall (5)
- Database (5)
- Electric vehicle (5)
- Elektrofahrzeug (5)
- Human body (5)
- International (5)
- Knie (menschl) (5)
- Layout (5)
- Leg (human) (5)
- Market (5)
- Markt (5)
- Messgerät (5)
- Official approval (5)
- Rear end collision (5)
- Sensor (5)
- Unfallrekonstruktion (5)
- Verformung (5)
- Veränderung (5)
- Accident rate (4)
- Bein (menschl) (4)
- Benutzung (4)
- Body (car) (4)
- Brennstoffzelle (4)
- Decke (Straße) (4)
- Deformable barrier (impact test) (4)
- Fahrzeugsitz (4)
- Fuel cell (4)
- Gestaltung (4)
- Headlamp (4)
- Hybrid vehicle (4)
- Hybridfahrzeug (4)
- Industrie (4)
- Industry (4)
- Intelligentes Transportsystem (4)
- Karosserie (4)
- Kraftfahrzeug (4)
- Lärm (4)
- Menschlicher Körper (4)
- Nachfrage (4)
- Nacht (4)
- Night (4)
- Noise (4)
- Oberfläche (4)
- Old people (4)
- Reconstruction (accid) (4)
- Reproducibility (4)
- Reproduzierbarkeit (4)
- Scheinwerfer (4)
- Seat (veh) (4)
- Straßenverkehrsrecht (4)
- Surface (4)
- Surfacing (4)
- Transport infrastructure (4)
- Unfallhäufigkeit (4)
- Use (4)
- Verkehrsinfrastruktur (4)
- Visual display (4)
- Abstandsregeltempomat (3)
- Adaptive cruise control (3)
- Air bag (restraint system) (3)
- Aktive Sicherheit (3)
- Ankündigung (3)
- Anthropmetric dummy (3)
- Antrieb (tech) (3)
- Apparatus (measuring) (3)
- Behinderter (3)
- Bicycle (3)
- Bildschirm (3)
- Brake light (3)
- Bremslicht (3)
- Bruch (mech) (3)
- Carriageway (3)
- Classification (3)
- Datenübertragung (telekom) (3)
- Daylight (3)
- Demand (3)
- Detection (3)
- Detektion (3)
- Disabled person (3)
- Driving aptitude (3)
- Emergency (3)
- Empfindlichkeit (3)
- Fahrbahn (3)
- Fahrrad (3)
- Fahrtauglichkeit (3)
- Fahrzeugbeleuchtung (3)
- Failure (3)
- Freight transport (3)
- Front (3)
- Haftung (jur) (3)
- Halswirbel (3)
- Highway (3)
- Impact study (3)
- Increase (3)
- Information (3)
- Interface (3)
- Kamera (3)
- Klassifizierung (3)
- Leuchtdichte (3)
- Liability (3)
- Luminance (3)
- Mathematical model (3)
- Medical examination (3)
- Mensch Maschine Verhältnis (3)
- Notfall (3)
- On the spot accident investigation (3)
- Optimum (3)
- Organisation (3)
- Propulsion (3)
- Prototyp (3)
- Prototype (3)
- Rear view mirror (3)
- Rechenmodell (3)
- Road user (3)
- Rolling resistance (3)
- Rollwiderstand (3)
- Rückspiegel (3)
- Sensitivity (3)
- Severity (acid (3)
- Sichtbarkeit (3)
- Straße (3)
- Tageslicht (3)
- Telecommunication (3)
- Telekommunikation (3)
- Traffic regulations (3)
- Unterfahrschutz (3)
- Untersuchung am Unfallort (3)
- Vehicle inspection (3)
- Vehicle lighting (3)
- Vergrößerung (3)
- Verkehrsteilnehmer (3)
- Versuchspuppe (3)
- Sichtbarkeit (3)
- Warnung (3)
- Windschutzscheibe (3)
- Windscreen (veh) (3)
- Wirbelsäule (3)
- Abblendlicht (2)
- Abdomen (2)
- Ablenkung (psychol) (2)
- Acceleration (2)
- Achslast (2)
- Active safety (2)
- Adolescent (2)
- Adult (2)
- Anti locking device (2)
- Articulated vehicle (2)
- Attention (2)
- Attitude (psychol) (2)
- Aufmerksamkeit (2)
- Autobahn (2)
- Autonomes Fahrzeug (2)
- Autonomous vehicle (2)
- Axle load (2)
- Baumusterzulassung (2)
- Baustelle (2)
- Beschleunigung (2)
- Bestrafung (2)
- Bicyclist (2)
- Blendung (2)
- Blind spot (veh) (2)
- Bridge (2)
- Brücke (2)
- Buch (2)
- Bumper (2)
- Camera (2)
- Car park (2)
- Cause (2)
- Cervical vertebrae (2)
- Comfort (2)
- Construction site (2)
- Contact (tyre road) (2)
- Control (2)
- Crash Test (2)
- Crashtest (2)
- Damage (2)
- Data acquisition (2)
- Data exchange (2)
- Data processing (2)
- Data transmission (telecom) (2)
- Datenaustausch (2)
- Datenerfassung (2)
- Datenverarbeitung (2)
- Dauerhaftigkeit (2)
- Deceleration (2)
- Deckschicht (2)
- Delivery vehicle (2)
- Digital model (2)
- Dipped headlight (2)
- Distraction (2)
- Durability (2)
- Echtzeit (2)
- Einstellung (psychol) (2)
- Elektronisches Stabilitätsprogramm (2)
- Erwachsener (2)
- Evaluation (2)
- Eye movement (2)
- Fahrgeschicklichkeit (2)
- Fahrleistung (2)
- Fahrsimulator (2)
- Fahrzeugabstand (2)
- Fahrzeugteile (2)
- Force (2)
- Forecast (2)
- Future transport mode (2)
- Gelenkfahrzeug (2)
- Glare (2)
- Grenzfläche (2)
- Griffigkeit (2)
- Gütertransport (2)
- Güterverkehr (2)
- Herstellung (2)
- Hinten (2)
- Hospital (2)
- Hüfte (menschl) (2)
- Individueller Verkehr (2)
- Information documentation (2)
- Intelligentes Verkehrssystem (2)
- Interactive model (2)
- Interaktives Modell (2)
- Interview (2)
- Jugendlicher (2)
- Knie (2)
- Knotenpunkt (2)
- Komfort (2)
- Kontakt Reifen-Straße (2)
- Kontrolle (2)
- Kraft (2)
- Krankenhaus (2)
- Kunststoff (2)
- Landstraße (2)
- Lichtsignal (2)
- Manufacture (2)
- Medical aspects (2)
- Medizinische Untersuchung (2)
- Mobility (2)
- Mobilität (2)
- Modell (2)
- Motorway (2)
- Nasse Straße (2)
- Numerisches Modell (2)
- Oberflächentextur (2)
- Organization (association) (2)
- Parkfläche (2)
- Penalty (2)
- Planning (2)
- Planung (2)
- Plastic material (2)
- Private transport (2)
- Prognose (2)
- Quality (2)
- Qualität (2)
- Radio (2)
- Real time (2)
- Rear (2)
- Reifenprofil (2)
- Road traffic (2)
- Rundfunk (2)
- Sachschaden (2)
- Safety glass (2)
- Sample (mater) (2)
- Schallpegel (2)
- Schutz (2)
- Sehvermögen (2)
- Sicherheitsglas (2)
- Simulator (driving) (2)
- Skidding resistance (2)
- Sound level (2)
- Spinal column (2)
- State of the art report (2)
- Steuerung (2)
- Stoßstange (2)
- Straßenverkehr (2)
- Stress (psychol) (2)
- Surface texture (2)
- Surveillance (2)
- Technische Überwachung (Fahrzeug) (2)
- Textbook (2)
- Toter Winkel (2)
- Traffic signal (2)
- Tyre tread (2)
- Underride protection (2)
- Unterleib (2)
- Ursache (2)
- Vehicle mile (2)
- Vehicle spacing (2)
- Vereinigtes Königreich (2)
- Verzögerung (2)
- Vibration (2)
- Vision (2)
- Vorn (2)
- Wearing course (2)
- Wet road (2)
- Wirksamkeitsuntersuchung (2)
- Zukünftiges Verkehrsmittel (2)
- Zulassung (tech) (2)
- Zusammenstoss (2)
- (menschl) (1)
- Abbiegen (1)
- Ablenkung (1)
- Abnutzung (1)
- Absorption (1)
- Accessibility (1)
- Accident data (1)
- Accident proneness (1)
- Accident reconstruction (1)
- Administration (1)
- Aged people (1)
- Alte leute (1)
- Alternative Energie (1)
- Alternative energy (1)
- Angle (1)
- Anhänger (1)
- Anordnung (1)
- Anthropometric body (1)
- Antiblockiereinrichtung (1)
- Antiblockiersystem (1)
- Antikollisisonssystem (1)
- Apparatus (measurement) (1)
- Apparatus [measuring] (1)
- Aquaplaning (1)
- Arbeitsgruppe (1)
- Area traffic control (1)
- Armaturenbrett (1)
- Arzneimittel (1)
- Asphaltstraße (Oberbau) (1)
- Aufprall (1)
- Augenbewegungen (1)
- Auspuff (1)
- Ballungsgebiet (1)
- Battery (1)
- Bau (1)
- Beanspruchung (1)
- Bearing capacity (1)
- Bein (1)
- Benchmark (1)
- Benefit cost analysis (1)
- Berechnung d Straßenoberbaus (1)
- Betriebsverhalten (1)
- Bibliographie (1)
- Bibliography (1)
- Biophysic (1)
- Bonnet (car) (1)
- Brake (1)
- Breaking (1)
- Breite (1)
- Bremse (1)
- Bus (1)
- Cadaver (1)
- Calibration (1)
- Carbon dioxide (1)
- Carbon monoxide (1)
- Catalysis (1)
- Cervical vertebrae; Conference; Evaluation (assessment); Injury; Spinal column; Test (1)
- Chart (1)
- Chassis (1)
- Cinematography (1)
- Coefficient of friction (1)
- Colour (1)
- Compatiblity (1)
- Components of the car (1)
- Components of the vehicle (1)
- Compression (1)
- Congestion (traffic) (1)
- Construction (1)
- Contact (Tyre road) (1)
- Conurbation (1)
- Cooperative intelligent transport system (1)
- Correlation (math, stat) (1)
- Corrosion (1)
- Crossing the road (pedestrian) (1)
- Dashboard (1)
- Data bank (1)
- Data security (1)
- Data transmission (1)
- Datensicherheit (1)
- Daytime running light (1)
- Deformable barrier (Impact test) (1)
- Deformable barrier system (impact test) (1)
- Dehnungsmessstreifen (1)
- Demand (econ) (1)
- Demografie (1)
- Demographie (1)
- Demography (1)
- Depth (1)
- Detection response task (1)
- Deterioration (1)
- Diesel engine (1)
- Dieselmotor (1)
- Dimension (1)
- Dispersion (stat) (1)
- Dissertation (1)
- Disstraction (1)
- Driver (veh) (1)
- Driver information system (1)
- Driver training (1)
- Driving (1)
- Druck (1)
- Drunkenness (1)
- Dusk (1)
- Dynamic penetration test (1)
- Dynamics (1)
- Dynamik (1)
- Dynamo (1)
- Dämmerung (1)
- EU directive (1)
- EU-Richtlinie (1)
- Economic efficiency (1)
- Economics of transport (1)
- Eichung (1)
- Eigenschaft (1)
- Eindringung (1)
- Electrode (1)
- Electroencephalography (1)
- Electronic stability program (1)
- Electronics (1)
- Elekronic stability program (1)
- Elektrode (1)
- Elektroencephalographie (1)
- Elektronik (1)
- Emission control (1)
- Emissionskontrolle (1)
- Energieeinsparung (1)
- Energy conservation (1)
- Engine capacity (1)
- Environment (1)
- Erfahrung [menschl] (1)
- Ersatzfahraufgabe (1)
- European New Car Assessment Programme (1)
- Evaluation (Assessment) (1)
- Evaluation [assessment] (1)
- Exhaust pipe (1)
- Experience [human] (1)
- Expert system (1)
- Expertensystem (1)
- Fahrassistenzsystem (1)
- Fahrausbildung (1)
- Fahrbahnmarkierung (1)
- Fahrbahnüberquerung (1)
- Fahrbare Barriere (1)
- Fahrerinformationssystem (1)
- Fahrstreifen (1)
- Fahrstreifenwechsel (1)
- Fahrwerk (1)
- Farbe (1)
- Fatigue (human) (1)
- Federal Republic of (1)
- Federung (1)
- Fernverkehrsstraße (1)
- Festigkeit (1)
- Feuer (1)
- Feuerlöscher (1)
- Film (Filmtechnik) (1)
- Finite element method (1)
- Fire (1)
- Fire extinguisher (1)
- Flexible pavement (1)
- Foot (not a measure) (1)
- Form (1)
- France (1)
- Frankreich (1)
- Frau (1)
- Freizeit (1)
- Frequency (1)
- Frequenz (1)
- Frost (1)
- Fuel (1)
- Fuß (1)
- Fußgängerbereich (1)
- Gebiet (1)
- Gebraucht (1)
- Gelände (1)
- Geländefahrzeug (1)
- Gierverhalten (1)
- Goods traffic (1)
- Graphische Darstellung (1)
- Grenzwert (1)
- Harmonisation (1)
- Harmonisierung (1)
- Harmonization (1)
- Head (human) (1)
- Height (1)
- Hell (1)
- Highway design (1)
- Hip (human) (1)
- Hubraum (1)
- Human factor (1)
- Human tolerance (1)
- Hydrocarbon (1)
- Höhe (1)
- In Bewegung (1)
- In service behaviour (1)
- In situ (1)
- Incident detection (1)
- Information management (1)
- Innenstadt (1)
- Intersection (1)
- Junction (1)
- Karte (1)
- Katalyse (1)
- Kleintransporter (1)
- Kognitive Aufgabenanforderung (1)
- Kohlendioxid (1)
- Kohlenmonoxid (1)
- Kohlenwasserstoff (1)
- Kompatiblität (1)
- Kontakt Reifen Straße (1)
- Kooperatives System (ITS) (1)
- Kopf (menschl) (1)
- Korrelation (math, stat) (1)
- Korrosion (1)
- Kraftstoff (1)
- Kraftübertragung (Fahrzeug) (1)
- Laborexperiment (1)
- Landstrasse (1)
- Lane changing (1)
- Lang-Lkw (1)
- Leichnam (1)
- Leicht (1)
- Length (1)
- Lenkrad (1)
- Leuchtdiode (1)
- Lichtstärke (1)
- Lidschlag (1)
- Lieferfahrzeug (1)
- Light (colour) (1)
- Light emitting diode (1)
- Light intensity (1)
- Lightweight (1)
- Limit (1)
- Location (1)
- Longer and heavier vehicle (1)
- Länge (1)
- Main road (1)
- Man-machine interface (1)
- Map (1)
- Materialveränderung (allg) (1)
- Matrix (1)
- Measuring (1)
- Medication (1)
- Medizinische Gesichtspunkte (1)
- Medizinische gesichtspunkte (1)
- Medizinische untersuchung (1)
- Mensch-Maschine-Schnittstelle (1)
- Menschlicher faktor (1)
- Menschlicher körper (1)
- Text (1)
- Methode der finiten Elemente (1)
- Mobile barrier (1)
- Model (not math) (1)
- Modell (non math) (1)
- Motor (1)
- Motor cycle (1)
- Motorhaube (1)
- Moving (1)
- Müdigkeit (1)
- Nachricht (1)
- Naturalistic Driving (1)
- Naturalistic driving (1)
- Nummer (1)
- Oberbau (1)
- Old People (1)
- On the right (1)
- Optische Anzeige (1)
- Organization (1)
- Ort (Position) (1)
- Overlapping (1)
- Parken (1)
- Parking (1)
- Parking place (one veh only) (1)
- Parkstand (einzeln) (1)
- Passive Sicherheit (1)
- Pavement (1)
- Pavement Management System (1)
- Pavement design (1)
- Pavement management system (1)
- Pedestrian precinct (1)
- Pelvis (1)
- Penetration (1)
- Pfahl (1)
- Physiolog Belastungsgrenze (1)
- Pile (1)
- Pkw; Verhütung (1)
- Pollutant (1)
- Population (1)
- Pressure (1)
- Probe (1)
- Productivity (1)
- Program (computer) (1)
- Properties (1)
- Prüefverfahren (1)
- Prüfkörper (1)
- Psychological aspects (1)
- Psychologie (1)
- Psychologische Gesichtspunkte (1)
- Psychology (1)
- Public transport (1)
- Publicity (1)
- Quality assurance (1)
- Qualitätssicherung (1)
- Rammsondierung (1)
- Rechenprogramm (1)
- Rechts (1)
- Recreation (1)
- Reflectorized material (1)
- Reflexstoffe (1)
- Region (1)
- Reibungsbeiwert (1)
- Retread tyre (1)
- Rippe (menschl) (1)
- Road (1)
- Road construction (1)
- Road marking (1)
- Road network (1)
- Robot (1)
- Roboter (1)
- Rotation (1)
- Route guidance (1)
- Runderneuerter Reifen (1)
- Rural road (1)
- Rutting (wheel) (1)
- Safety fence (1)
- Schadstoff (1)
- Schall (1)
- Schnittstelle (1)
- Schulter (1)
- Schutzeinrichtung (1)
- Schweregrad /Unfall (1)
- Schwingung (1)
- Schädel (1)
- Second hand (1)
- Seite (1)
- Service area (1)
- Shape (1)
- Shoulder (human) (1)
- Side (1)
- Size and weight regulations (1)
- Skill (road user) (1)
- Skull (1)
- Social factors (1)
- Sociology (1)
- Software (1)
- Sound (1)
- Soziale Faktoren (1)
- Soziologie (1)
- Spain (1)
- Spanien (1)
- Specification (standard ) (1)
- Spectrum (1)
- Spektrum (1)
- Sport utility vehicle (1)
- Spurrinne (1)
- Stadardization (1)
- Stadt (1)
- Stand der Technik (Bericht) (1)
- Standard (1)
- Standardabweichung (1)
- Statics (1)
- Statik (1)
- Statistic (1)
- Steering wheel (1)
- Steifigkeit (1)
- Stiffness (1)
- Strain gauge (1)
- Straßenbau (1)
- Straßenentwurf (1)
- Straßennetz (1)
- Strength (mater) (1)
- Stress (1)
- Stress (psycho) (1)
- Störfallentdeckung (1)
- Surrogate driving set-up (1)
- Suspension (veh) (1)
- Sustainability (1)
- Tactile perception (1)
- Tagesfahrlicht (1)
- Taktiles Signal (1)
- Tangential (1)
- Tank Rast Anlage (1)
- Technische Vorschriften (1)
- Technische Überwachung (1)
- Terrain (1)
- Tests (1)
- Thesis (1)
- Tiefe (1)
- Town centre (1)
- Toxicity (1)
- Toxizität (1)
- Tracking task (1)
- Trackingaufgabe (1)
- Traffic Control (1)
- Traffic assignment (1)
- Traffic engineering (1)
- Traffic flow (1)
- Traffic lanes (1)
- Traffic regulation (1)
- Traffic sign (1)
- Tragfähigkeit (1)
- Trailer (1)
- Train (1)
- Transmission (veh) (1)
- Transport (1)
- Trunkenheit (1)
- Tunnel (1)
- Turning (1)
- Typenzulassung (1)
- Tätigkeitsbericht (1)
- USA (1)
- Umwelt (1)
- Umweltfreundlichkeit (1)
- Underride prevention (1)
- Unfalldaten (1)
- Unfallneigung (1)
- United Kingdom (1)
- United kingdom (1)
- Urban area (1)
- Vehicle Regulations (1)
- Vehicle regulation (1)
- Veraenderung (1)
- Verkehrsfluss (1)
- Verkehrsstauung (1)
- Verkehrstechnik (1)
- Verkehrsumlegung (1)
- Verkehrswirtschaft (1)
- Verkehrszeichen (1)
- Verwaltung (1)
- Video camera (1)
- Vorne (1)
- Wasser (1)
- Water (1)
- Wear (1)
- Weather (1)
- Werbung (1)
- Width (1)
- Winkel (1)
- Wirkungsanalyse (1)
- Wirtschaftlichkeit (1)
- Witterung (1)
- Woman (1)
- Working group (1)
- Yawing (veh) (1)
- Zahl (1)
- Zentrale Verkehrssteuerung (1)
- Zielführungssystem (1)
- Zug (Eisenbahn) (1)
- Zugänglichkeit (1)
- Zusammendrückung (1)
- Zustandsbewertung (1)
- skill (1)
- Öffentlicher Verkehr (1)
- Überdeckung (1)
Institut
- Abteilung Fahrzeugtechnik (209) (entfernen)
Regarding to the German road traffic licensing regulations it is mandatory to have a light system using a bicycle in public traffic. All attached components must be approved. The admission requires additional restrictions such as a dynamo as energy source with a nominal voltage of 6 V. Batteries are only allowed in addition to this. To adopt the German bicycle regulation to the state of art of an energy efficient lighting, additional power sources such as a battery respectively rechargeable batterie should be evaluated. The project will propose amendments for German Road Traffic Regulations and technical requirements.
A biofidelic flexible pedestrian legform impactor (FlexPLI) has been developed from the year 2000 onwards and evaluated by a technical evaluation group (Flex-TEG) of UN-ECE GRSP. A recently established UN-ECE GRSP Informal Group on GTR9 Phase 2 is aiming at introducing the FlexPLI within world-wide regulations on pedestrian safety (Phase 2 of GTR No. 9 as well as the new UN regulation 127 on pedestrian safety) as a test tool for the assessment of lower extremity injuries in lateral vehicle-to-pedestrian accidents. Besides, the FlexPLI has already been introduced within JNCAP and is on the Euro NCAP roadmap for 2014. Despite of the biofidelic properties in the knee and tibia sections, several open issues related to the FlexPLI, like the estimation of the cost benefit, the feasibility of vehicle compliance with the threshold values, the robustness of the impactor and of the test results, the comparability between prototype and production level and the finalization of certification corridors still needed to be solved. Furthermore, discussions with stakeholders about a harmonized lower legform to bumper test area are still going on. This paper describes several studies carried out by the Federal Highway Research Institute (BASt) regarding the benefit due to the introduction of the FlexPLI within legislation for type approval, the robustness of test results, the establishment of new assembly certification corridors and a proposal for a harmonized legform to bumper test area. Furthermore, a report on vehicle tests that previously had been carried out with three prototype legforms and were now being repeated using legforms with serial production status, is given. Finally, the paper gives a status report on the ongoing simulation and testing activities with respect to the development and evaluation of an improved test procedure with upper body mass for assessing pedestrian femur injuries.
For a number of EU regulatory acts Virtual Testing (VT) is already allowed for type approval (see Commission Regulation No. 371/2010 of 16 April 2010 amending the Framework Directive 2007/46/EC). However, only a very general procedure on how to apply VT for type approval is provided. Technical details for specific regulatory acts are not given yet. The main objective of the European project IMVITER (IMplementation of VIrtual TEsting in Safety Regulations) was to promote the implementation of VT in safety regulations. When proposing VT procedures the new regulation was taken into account, in particular, addressing open issues. Special attention was paid to pedestrian protection as pilot cases. A key aspect for VT implementation is to demonstrate that the employed simulation models are reliable. This paper describes how the Verification and Validation (V&V) method defined by the American Society of Mechanical Engineers was adapted for pedestrian protection VT based assessment. or the certification of headform impactors an extensive study was performed at two laboratories to assess the variability in calibration tests and equivalent results from a set of simulation models. Based on these results a methodology is defined for certification of headform impactor simulation models. A similar study was also performed with one vehicle in the type approval test setup. Its bonnet was highly instrumented and subjected to 45 impacts in five different positions at two laboratories in order to obtain an estimation of the variability in the physical tests. An equivalent study was performed using stochastic simulation with a metamodel fed with observed variability in impact conditions of physical headforms. An estimation of the test method uncertainty was obtained and used in the definition of a validation corridor for simulation models. Validation metric and criteria were defined in cooperation with the ISO TC22 SC10 and SC12 WG4 "Virtual Testing". A complete validation procedure including different test setups, physical magnitudes and evaluation criteria is provided. A detailed procedural flowchart is developed for VT implementation in EC Regulation No 78/2009 based on a so called "Hybrid VT" approach, which combines real hardware based head impact tests and simulations. This detailed flowchart is shown and explained within this paper. Another important point within the virtual testing based procedures is the documentation of relevant information resulting from the verification and validation process of the numerical models used. For this purpose report templates were developed within the project. The proposed procedure fixes minimum V&V requirements for numerical models to be confidently used within the type-approval process. It is not intended to be a thorough guide on how to build such reliable models. Different modeling methodologies are therefore possible, according to particular OEM know-how. These requirements respond to a balance amongst the type-approval stakeholders interests. A cost-benefit analysis, which was also performed within the IMVITER project, supports this approach, showing the conditions in which VT implementation is beneficial. Based on the experience gained in the project and the background of the experts involved an outlook is given as a roadmap of VT implementation, identifying the most important milestones to be reached along the way to a future vehicle type approval procedure supported by VT. The results presented in this paper show an important step addressing open questions and fostering the future acceptance of virtual testing in pedestrian protection type approval procedures.
A series of drop tests and vehicle tests with the adult head impactor according to Regulation (EC) 631/2009 and drop tests with the phantom head impactor according to UN Regulation No. 43 have been carried out by the German Federal Highway Research Institute (BASt) on behalf of the German Federal Ministry of Transport, Building and Urban Development (BMVBS). Aim of the test series was to study the injury risk for vulnerable road users, especially pedestrians, in case of being impacted by a motor vehicle in a way described within the European Regulations (EC) 78/2009 and (EC) 631/2009. Furthermore, the applicability of the phantom head drop test described in UN Regulation No. 43 for plastic glazing should be investigated. In total, 30 drop tests, thereof 18 with the adult head impactor and 12 with the phantom head impactor, and 49 vehicle tests with the adult head impactor were carried out on panes of laminated safety glass (VSG), polycarbonate (PC) and laminated polycarbonate (L-PC). The influence of parameters such as the particular material properties, test point locations, fixations, ambient conditions (temperature and impact angle) was investigated in detail. In general, higher values of the Head Injury Criterion (HIC) were observed in tests on polycarbonate glazing. As the HIC is the current criterion for the assessment of head injury risk, polycarbonate glazing has to be seen as more injurious in terms of vulnerable road user protection. In addition, the significantly higher rebound of the head observed in tests with polycarbonate glazing is suspected to lead to higher neck loads and may also cause higher injury risks in secondary impacts of vulnerable road users. However, as in all tests with PC glazing no damage of the panes was observed, the risk of skin cut injuries may be expected to be reduced significantly. The performed test series give no indication for the test procedure prescribed in UN Regulation No. 43 as a methodology to approve glass windscreen not being feasible for polycarbonate glazing, as all PC panes tested fulfilled the UN R 43 requirements. The performance of the windscreen area will not be relevant for vehicle type approval according to the upcoming UN Regulation for pedestrian protection. However, it is recommended that pedestrian protection being considered for plastic windscreens to ensure at least the same level of protection as glass windscreens.
Recent accident statistics from the German national database state bicyclists being the second endangered group of vulnerable road users besides pedestrians. With 399 fatalities, more than 14.000 seriously injured and more than 61.000 slightly injured persons on german roads in the year 2011, the group of bicyclists is ranked second of all road user groups (Statistisches Bundesamt, 2012). While the overall bicycle helmet usage frequency in Germany is very low, evidence is given that its usage leads to a significant reduction of severe head injuries. After an estimation of the benefit of bicycle helmet usage as well as an appropriate test procedure for bicyclists, this paper describes two different approaches for the improvement of bicyclist safety. While the first one is focusing on the assessment of the vehicle based protection potential for bicyclists, the second one is concentrating on the safety assessment of bicycle helmets. Within the first part of the study the possible revision of the existing pedestrian testing protocols is being examined, using in depth accident data, full scale simulation and hardware testing. Within the second part of the study, the results of tests according to supplemental test procedures for the safety assessment of bicycle helmets developed by the German Federal Highway Research Institute (BASt) are presented. An additional full scale test performed at reduced impact speed proves that measures of active vehicle safety as e.g. braking before the collision event do not necessarily always lead to a reduction of injury severity.
Die Initiative der Einführung kooperativer Systeme in einem Korridor von Rotterdam über Frankfurt/Main nach Wien, dem sogenannten C-ITS Corridor, und damit auch in Deutschland wurde im Juni 2013 durch die Unterzeichnung einer entsprechenden Absichtserklärung des Bundesministeriums für Verkehr, Bau und Stadtentwicklung mit den Verkehrsministern der Niederlande und Österreichs offiziell gestartet. In vielen Forschungsprojekten wurden vorher die Grundlagen erarbeitet, um eine solche Einführung technisch überhaupt erst möglich zu machen. Im Beitrag werden diese Ergebnisse nochmals kurz aufgegriffen und um den aktuellen Stand bei den Entwicklungen im C-ITS Corridor erweitert. Als erstes Einführungsszenario wurden die Baustellenwarnung und Kooperatives Verkehrsmanagement unter Einbeziehung von Fahrzeugdaten gewählt. Nicht verschwiegen werden sollen hierbei auch die wesentlichen Herausforderungen, die im Übergang von Forschung und Feldtests zu realen Anwendungen liegen.
The goal of the project FIMCAR (Frontal Impact and Compatibility Assessment Research) was to define an integrated set of test procedures and associated metrics to assess a vehicle's frontal impact protection, which includes self- and partner-protection. For the development of the set, two different full-width tests (full-width deformable barrier [FWDB] test, full-width rigid barrier test) and three different offset tests (offset deformable barrier [ODB] test, progressive deformable barrier [PDB] test, moveable deformable barrier with the PDB barrier face [MPDB] test) have been investigated. Different compatibility assessment procedures were analysed and metrics for assessing structural interaction (structural alignment, vertical and horizontal load spreading) as well as several promising metrics for the PDB/MPDB barrier were developed. The final assessment approach consists of a combination of the most suitable full-width and offset tests. For the full-width test (FWDB), a metric was developed to address structural alignment based on load cell wall information in the first 40 ms of the test. For the offset test (ODB), the existing ECE R94 was chosen. Within the paper, an overview of the final assessment approach for the frontal impact test procedures and their development is given.
Müdigkeit am Steuer ist eine bedeutsame Ursache von Straßenverkehrsunfällen. Es steht eine Fülle unterschiedlicher Methoden zur Verfügung, um Müdigkeit beim Fahrer zu erkennen. Ziel des vorliegenden Projekts war es, auf Basis einer mehrstufigen Befragung von zwölf Experten aus Industrie- und Hochschulforschung die Stärken und Schwächen der derzeit validesten objektiven Müdigkeitsmessverfahren vergleichend zu beschreiben. Als Basis der Bewertung diente ein eigens erarbeiteter Gütekriterienkatalog. Zu den validesten Müdigkeitsmessverfahren gehören aus Expertensicht Lenkverhalten und Spurhaltung, Indikatoren des Lidschlussverhaltens und des EEG, das videobasierte Expertenrating sowie der kontrovers diskutierte Pupillografische Schläfrigkeitstest. Die Güteprofile der sechs ausgewählten Messverfahren werden aufgeführt. Je nach Einsatzgebiet sind alle ausgewählten Messverfahren (Forschung und Entwicklung), nur einige (Müdigkeitswarnsystem im Fahrzeug), oder kein einziges (Verkehrskontrolle) geeignet. Dem Urteil der Experten nach bedarf eine valide Müdigkeitserfassung der Kombination von mindestens zwei Messverfahren unter Berücksichtigung der spezifischen Stärke-Schwächenprofile.
The off-set assessment procedure potentially contributes to the FIMCAR objectives to maintain the compartment strength and to assess load spreading in frontal collisions. Furthermore it provides the opportunity to assess the restraint system performance with different pulses if combined with a full-width assessment procedure in the frontal assessment approach. Originally it was expected that the PDB assessment procedure would be selected for the FIMCAR assessment approach. However, it was not possible to deliver a compatibility metric in time so that the current off-set procedure (ODB as used in UNECE R94) with some minor modifications was proposed for the FIMCAR Assessment Approach. Nevertheless the potential to assess load spreading, which appears not to be possible with any other assessed frontal impact assessment procedure was considered to be still high. Therefore the development work for the PDB assessment procedure did not stop with the decision not to select the PDB procedure. As a result of the decisions to use the current ODB and to further develop the PDB procedure, both are covered within this deliverable. The deliverable describes the off-set test procedure that will be recommended by FIMCAR consortium, this corresponds to the ODB test as it is specified in UN-ECE Regulation 94 (R94), i.e. EEVC deformable element with 40% overlap at a test speed of 56 km/h. In addition to the current R94 requirements, FIMCAR will recommend to introduce some structural requirements which will guarantee sufficiently strong occupant compartments by enforcing the stability of the forward occupant cell. With respect to the PDB assessment procedure a new metric, Digital Derivative in Y direction - DDY, was developed, described, analysed, and compared with other metrics. The DDY metric analyses the deformation gradients laterally across the PDB face. The more even the deformation, the lower the DDY values and the better the metric- result. In order analyse the different metrics, analysis of the existing PDB test results and the results of the performed simulation studies was performed. In addition, an assessment of artificial deformation profiles with the metrics took place. This analysis shows that there are still issues with the DDY metric but it appears that it is possible to solve them with future optimisations. For example the current metric assesses only the area within 60% of the half vehicle width. For vehicles that have the longitudinals further outboard, the metric is not effective. In addition to the metric development, practical issues of the PDB tests such as the definition of a scan procedure for the analysis of the deformation pattern including the validation of the scanning procedure by the analysis of 3 different scans at different locations of the same barrier were addressed. Furthermore the repeatability and reproducibility of the PDB was analysed. The barrier deformation readings seem to be sensitive with respect to the impact accuracy. In total, the deliverable is meant to define the FIMCAR off-set assessment procedure and to be a starting point for further development of the PDB assessment procedure.
The objective of this deliverable is to describe the expected influence of the candidate test procedures developed in FIMCAR for frontal impact on other impact types. The other impact types of primary interest are front-to-side impacts, collisions with road restraint systems (e.g. guardrails), and heavy goods vehicle impacts. These collision types were chosen as they involve structures that can be adapted to improve safety. Collisions with vulnerable road users (VRU) were not explicitly investigated in FIMCAR. It is expected that the vehicle structures of interest in FIMCAR can be designed into a VRU friendly shell. Information used for this deliverable comes from simulations and car-to-car crash tests conducted in FIMCAR or review of previous research. Three test configurations (full width, offset, and moving deformable barriers) were the input to the FIMCAR selection process. There are three different types of offset tests and two different full width tests. During the project test procedures could be divided into three groups that provide different influences or outcomes on vehicle designs: 1. The ODB barrier provides a method to assess part of the vehicles energy absorption capabilities and compartment test in one test. 2. The FWRB and FWDB have similar capabilities to control structural alignment, further assess energy absorption capabilities, and promote the improvements in the occupant restraint system for high deceleration impacts. 3. The PDB and MPDB can be used to promote better load spreading in the vehicle structures, in addition to assessing energy absorption and occupant compartment strength in an offset configuration. The consortium selected the ODB and FWDB as the two best candidates for short term application in international rulemaking. The review of how all candidates would affect vehicle performance in other impacts (beside front-to-front vehicle or frontal impacts with fixed obstacles) however is reported in this deliverable to support the benefit analysis reported in FIMCAR. The grouping presented above is used to discuss all five test candidates using similarities between certain tests and thereby simplify the discussion.
The objectives of the FIMCAR (Frontal Impact and Compatibility Assessment Research) project are to answer the remaining open questions identified in earlier projects (such as understanding of the advantages and disadvantages of force based metrics and barrier deformation based metrics, confirmation of specific compatibility issues such as structural interaction, investigation of force matching) and to finalise the frontal impact test procedures required to assess compatibility. Research strategies and priorities were based on earlier research programs and the FIMCAR accident data analysis. The identified real world safety issues were used to develop a list of compatibility characteristics which were then prioritised within the consortium. This list was the basis for evaluating the different test candidates. This analysis resulted in the combination of the Full Width Deformable Barrier test (FWDB) with compatibility metrics and the existing Offset Deformable Barrier (ODB) as described in UN-ECE Regulation 94 with additional cabin integrity requirement as being proposed as the FIMCAR assessment approach. The proposed frontal impact assessment approach addresses many of the issues identified by the FIMCAR consortium but not all frontal impact and compatibility issues could be addressed.
Road markings are an essential component of a safe road. In particular, the optical guidance at night and under wet conditions rates high. Special surface textures of road markings can enhance the nighttime visibility during wetness, but they can lead on the other hand to noise emission during passages of vehicles and thus annoy residents. In the present study the tyre/road marking noise is analysed based on two different measurement methods for traffic noise: Several different road markings with increased nighttime visibility during wetness were overrun and the noise was determined by controlled coast-by measurements as well as close-proximity measurements. For both measuring methods the averaged A-weighted sound pressure levels were determined and an analysis of the third octave spectra was performed in order to identify annoying tonal components. The results of both measurement methods were compared with each other. Limitations of the individual measurement methods were overcome by combining the data. Properties of road marking noise depending on the texture of the marking are discussed in relation to those of road surface noise. The results will help specifying road marking texture types that ensure less annoyance and at the same time good visibility at wetness and night-time.
For the assessment of vehicle safety in frontal collisions compatibility (which consists of self and partner protection) between opponents is crucial. Although compatibility has been analysed worldwide for over 10 years, no final assessment approach has been defined to date. Taking into account the European Enhanced Vehicle safety Committee (EEVC) compatibility and frontal impact working group (WG15) and the FP5 VC-COMPAT project activities, two test approaches have been identified as the most promising candidates for the assessment of compatibility. Both are composed of an off-set and a full overlap test procedure. In addition another procedure (a test with a moving deformable barrier) is getting more attention in current research programmes. The overall objective of the FIMCAR project is to complete the development of the candidate test procedures and propose a set of test procedures suitable for regulatory application to assess and control a vehicle- frontal impact and compatibility crash safety. In addition an associated cost benefit analysis should be performed. The objectives of the work reported in this deliverable were to review existing full-width test procedures and their discussed compatibility metrics, to report recent activities and findings with respect to full-width assessment procedures and to assess test procedures and metrics. Starting with a review of previous work, candidate metrics and associated performance limits to assess a vehicle- structural interaction potential, in particular its structural alignment, have been developed for both the Full Width Deformable Barrier (FWDB) and Full Width Rigid Barrier (FWRB) tests. Initial work was performed to develop a concept to assess a vehicle- frontal force matching. However, based on the accident analyses performed within FIMCAR frontal force matching was not evaluated as a first priority and thus in line with FIMCAR strategy the focus was put on the development of metrics for the assessment of structural interaction which was evaluated as a first priority.
Accident analysis
(2014)
For the assessment of vehicle safety in frontal collisions compatibility (which consists of self and partner protection) between opponents is crucial. Although compatibility has been analysed worldwide for years, no final assessment approach has been defined to date. Taking into account the European Enhanced Vehicle safety Committee (EEVC) compatibility and frontal impact working group (WG15) and the EC funded FP5 VC-COMPAT project activities, two test approaches have been identified as the most promising candidates for the assessment of compatibility. Both are composed of an off-set and a full overlap test procedure. In addition another procedure (a test with a moving deformable barrier) is getting more attention in today- research programmes. The overall objective of the FIMCAR project is to complete the development of the candidate test procedures and propose a set of test procedures suitable for regulatory application to assess and control a vehicle- frontal impact and compatibility crash safety. In addition an associated cost benefit analysis should be performed. The specific objectives of the work reported in this deliverable were: - Determine if previously identified compatibility issues are still relevant in current vehicle fleet: Structural interaction, Frontal force matching, Compartment strength in particular for light cars. - Determine nature of injuries and injury mechanisms: Body regions injured o Injury mechanism: Contact with intrusion, Contact, Deceleration / restraint induced. The main data sources for this report were the CCIS and Stats 19 databases from Great Britain and the GIDAS database from Germany. The different sampling and reporting schemes for the detailed databases (CCIS & GIDAS) sometimes do not allow for direct comparisons of the results. However the databases are complementary " CCIS captures more severe collisions highlighting structure and injury issues while GIDAS provides detailed data for a broader range of crash severities. The following results represent the critical points for further development of test procedures in FIMCAR.
Cost benefit analysis
(2014)
Although the number of road accident casualties in Europe is falling the problem still remains substantial. In 2011 there were still over 30,000 road accident fatalities [EC 2012]. Approximately half of these were car occupants and about 60 percent of these occurred in frontal impacts. The next stage to improve a car- safety performance in frontal impacts is to improve its compatibility for car-to-car impacts and for collisions against objects and HGVs. Compatibility consists of improving both a car- self and partner protection in a manner such that there is good interaction with the collision partner and the impact energy is absorbed in the car- frontal structures in a controlled way which results in a reduction of injuries. Over the last ten years much research has been performed which has found that there are four main factors related to a car- compatibility [Edwards 2003, Edwards 2007]. These are structural interaction potential, frontal force matching, compartment strength and the compartment deceleration pulse and related restraint system performance. The objective of the FIMCAR FP7 EC-project was to develop an assessment approach suitable for regulatory application to control a car- frontal impact and compatibility crash performance and perform an associated cost benefit analysis for its implementation.
For the assessment of vehicle safety in frontal collisions compatibility (which consists of self and partner protection) between opponents is crucial. Although compatibility has been analysed worldwide for over 10 years, no final assessment approach has been defined to date. Taking into account the European Enhanced Vehicle safety Committee (EEVC) compatibility and the final report to the steering committee on frontal impact [Faerber 2007] and the FP5 VC-COMPAT[Edwards 2007] project activities, two test approaches were identified as the most promising candidates for the assessment of compatibility. Both are composed of an off-set and a full overlap test procedure. In addition another procedure (a test with a moving deformable barrier) is getting more attention in current research programmes. The overall objective of the FIMCAR project is to complete the development of the candidate test procedures and propose a set of test procedures suitable for regulatory application to assess and control a vehicle- frontal impact and compatibility crash safety. In addition an associated cost benefit analysis will be performed. In the FIMCAR Deliverable D 3.1 [Adolph 2013] the development and assessment of criteria and associated performance limits for the full width test procedure were reported. In this Deliverable D3.2 analyses of the test data (full width tests, car-to-car tests and component tests), further development and validation of the full width assessment protocol and development of the load cell and load cell wall specification are reported. The FIMCAR full-width assessment procedure consists of a 50 km/h test against the Full Width Deformable Barrier (FWDB). The Load Cell Wall behind the deformable element assesses whether or not important Energy Absorbing Structures are within the Common Interaction Zone as defined based on the US part 581 zone. The metric evaluates the row forces and requires that the forces directly above and below the centre line of the Common Interaction Zone exceed a minimum threshold. Analysis of the load spreading showed that metrics that rely on sum forces of rows and columns are within acceptable tolerances. Furthermore it was concluded that the Repeatability and Reproducibility of the FWDB test is acceptable. The FWDB test was shown to be capable to detect lower load paths that are beneficial in car-to-car impacts.
In the European Project FIMCAR, a proposal for a frontal impact test configuration was developed which included an additional full width deformable barrier (FWDB) test. Motivation for the deformable element was partly to measure structural forces as well as to produce a severe crash pulse different from that in the offset test. The objective of this study was to analyze the safety performance of vehicles in the full width rigid barrier test (FWRB) and in the full width deformable barrier test (FWDB). In total, 12 vehicles were crashed in both configurations. Comparison of these tests to real world accident data was used to identify the crash barrier most representative of real world crashes. For all vehicles, the airbag visible times were later in the FWDB configuration. This was attributed to the attenuation of the initial acceleration peak, observed in FWRB tests, by the addition of the deformable element. These findings were in alignment with airbag triggering times seen in real world crash data. Also, the dummy loadings were slightly worse in FWDB compared to FWRB tests, which is possibly linked to the airbag firing and a more realistic loading of the vehicle crash structures in the FWDB configuration. Evaluations of the lower extremities have shown a general increasing of the tibia index with the crash pulse severity.
Es wird zunächst eine Übersicht über typische Systembausteine und wesentliche Akteure für den Betrieb Intelligenter Verkehrssysteme (IVS) in Deutschland gegeben. Unter Verwendung der IVS-Systembausteine werden für die vier Systemsparten Intelligenter Verkehrssysteme - die Straßenverkehrstelematik, - die Verkehrsinformationsdienste, - die autonomen Fahrerassistenzsysteme und - die kooperativen Systeme einfache funktionale Anwendungsbeispiele skizziert und analysiert. Die Anwendungsbeispiele bilden den Ausgangspunkt für eine Rekombination der Systembausteine. Die so erreichte Auflösung der Systemgrenzen hin zur Modularisierung der einzelnen Szenarien liefert eine Vielzahl neuer Kombinationsmöglichkeiten der identifizierten Bausteine intelligenter Verkehrssysteme in einer Matrix. Der vorliegende Bericht verdeutlicht und veranschaulicht die Potenziale dieses Baukastens, benennt außerdem aber auch die noch zu bewältigenden Herausforderungen im organisatorischen, funktionalen und technischen Bereich. Der Bericht ist als Grundlagenarbeit zu verstehen, die in eine Vielzahl weiterführender Aktivitäten in Deutschland als harmonisierte Analyse eingeflossen ist und noch einfließen wird.
Rastanlagen an BAB - Verbesserung der Auslastung und Erhöhung der Kapazität durch Telematiksysteme
(2014)
Erhebungen im Auftrag des damaligen Bundesministeriums für Verkehr, Bau und Stadtentwicklung (BMVBS) im März 2008 belegten, dass auf und an den Bundesautobahnen etwa 14.000 Lkw-Parkstände fehlen. Neben der baulichen Schaffung neuer Parkstandkapazitäten fördert das Bundesministerium für Verkehr und digitale Infrastruktur (BMVI) auch den Einsatz telematischer Systeme zur besseren Auslastung und Kapazitätserhöhung auf Rastanlagen. Auch aufgrund unregelmäßiger Nachfrage ist ein Verteilen der Nachfrage innerhalb eines Streckenabschnitts erforderlich. Dies kann durch den Einsatz von Telematik geleistet werden. Zur Ermittlung der Belegung der Rastanlagen auf einem Streckenabschnitt werden diese mit Detektionstechnik ausgerüstet. Die detektierten Daten über die Belegung von Lkw-Parkständen werden zu Informationen aufbereitet. Diese Parkinformationen können über verschiedene Kommunikationswege (z. B. über elektronische Anzeigen an der Autobahn oder das Internet) den Lkw-Fahrern sowie den Logistikunternehmen übermittelt werden. Für die Güterverkehrsbranche bedeutet dies eine verbesserte Planbarkeit der Lenk- und Ruhezeiten der Lkw-Fahrer. Gleichzeitig soll mittels Parkinformationen eine gleichmäßigere Auslastung des Parkangebots an Bundesautobahnen (BAB) erzielt und somit das Auftreten gefährlicher Situationen durch verkehrsgefährdend abgestellte Fahrzeuge in den Zufahrten von Rastanlagen verhindert werden. Insgesamt ist somit von einer Erhöhung der Sicherheit für alle Verkehrsteilnehmer auf den BAB auszugehen. Bewährte Detektoren, wie Induktivschleifen, stehen auf Rastanlagen vor neuen Herausforderungen. Hierfür bedurfte es neuer technischer Entwicklungen, welche die besonderen Randbedingungen auf einer Rastanlage und die Anforderungen an die Informationsqualität von Parkinformationen berücksichtigen. Neue Detektoren wurden im Rahmen von Pilotprojekten der Bundesländer erprobt. Die Bundesanstalt für Straßenwesen (BASt) hat die Pilotprojekte unter wissenschaftlichen Gesichtspunkten mit dem Fokus einer zukünftigen Evaluierung begleitet. Dazu wurde ein einheitliches Bewertungsverfahren für Telematiksysteme auf Rastanlagen entwickelt. Das Bewertungsverfahren erlaubt - im Gegensatz zu Prüfungen gemäß Technischen Lieferbedingungen für Streckenstationen (TLS) -, den Fokus auf die Bewertung des Gesamtkonzeptes zu legen, d. h., das Zusammenspiel aus Detektion, Steuerungsverfahren und Kommunikation zum Verkehrsteilnehmer kann systematisch analysiert werden. Ergebnis bisheriger Tätigkeiten der BASt ist weiterhin die Entwicklung eines neuen Steuerungsverfahrens "Kompaktparken", welches das vorhandene Spektrum telematischer Systeme auf Rastanlagen sinnvoll ergänzt. Kompaktparken basiert auf der Idee, durch zeitliches Sortieren mehr parkende Fahrzeuge auf der Rastanlage zu platzieren, die Flächen von Fahrgassen einzusparen und geordnetes, sicheres Parken zu unterstützen. Als Koordinierungsstelle der deutschen Location Code List und Mitglied in der internationalen Traveller Information Services Association (TISA) unterstützt die BASt die Weiterentwicklung von Diensten zur Bereitstellung von Parkinformationen in die Fahrzeuge. Der vorliegende Bericht fasst den Stand der gewonnenen Erkenntnisse über Maßnahmen zur Auslastung und Erhöhung der Kapazität von Rastanlagen an BAB zusammen. Der Bericht basiert auf Literaturrecherchen, eigenen Untersuchungen und Tätigkeiten der BASt sowie Gesprächen mit Betreibern und Anbietern telematischer Systeme für Rastanlagen. Zunächst werden die derzeit eingesetzten Techniken für Detektion und Kommunikation sowie Steuerungsverfahren vorgestellt. Ergänzend werden mögliche, bislang noch nicht für das telematische Lkw-Parken eingesetzte Techniken betrachtet. Darauf aufbauend wurde ein Konzept entwickelt, wie zukünftig eine intelligente Streckensteuerung wirken kann. Diese soll im Gegensatz zu Parkinformationen für einzelne Rastanlagen die Belegung mehrerer Rastanlagen eines Streckenabschnitts berücksichtigen und Parkempfehlungen für die Nutzer ermöglichen. Dazu wird vom Stand der Technik ausgehend eine mögliche Realisierungsvariante beschrieben und der erforderliche Entwicklungsbedarf aufgezeigt. Vorschläge zur Gestaltung von Parkinformationen runden das Konzept ab. Es ist beabsichtigt, den Bericht im Sinne eines Maßnahmenkataloges mit fortschreitendem Erkenntnisstand zu aktualisieren. Er soll im Besonderen Betreibern und Dienstanbietern Orientierung bei der Systemgestaltung bieten. Gleichzeitig sollen Entwicklungen im Bereich fahrzeugseitiger Parkinformationen angestoßen werden. Das Bewertungsverfahren wiederum soll zukünftig eine vergleichende Bewertung von telematischen Systemen auf Rastanlagen ermöglichen und zu einer kontinuierlichen Verbesserung der Systeme beitragen. Zum Zeitpunkt der Berichtslegung stehen die abschließenden Ergebnisse der einheitlichen Bewertung der Detektoren in den Pilotprojekten aus und sind mit einer Fortschreibung des Berichts zu ergänzen.
Der vom 01.01.2012 bis zum 31.12.2016 andauernde Feldversuch der Bundesregierung mit Lang-Lkw wird durch die Bundesanstalt für Straßenwesen (BASt) wissenschaftlich begleitet. Lang-Lkw sind Fahrzeuge und Fahrzeugkombinationen, - die mit bis zu 25,25 m zwar länger als nach den geltenden Regelungen ausgeführt sein dürfen, - im Vergleich zu herkömmlichen Lkw um bis zu 6,50 m länger sind, - aber kein höheres Gesamtgewicht als die auch heute schon geltenden 40 t beziehungsweise 44 t im Vor- und Nachlauf zum Kombinierten Verkehr haben. Im Feldversuch werden die Chancen und Risiken des Einsatzes der Lang-Lkw untersucht. Nach etwa der Hälfte des Feldversuchs wurden die wesentlichen Erkenntnisse aus dem bisherigen Untersuchungszeitraum in einem Zwischenbericht von der BASt zusammengefasst und bewertet. Der Zwischenbericht der BASt gliedert sich thematisch und enthält neben den für die Konzeption der Gesamtuntersuchung erforderlichen rechtlichen Grundlagen und vorliegenden Erkenntnissen aus der Literatur insbesondere die Zusammenfassungen verschiedener Forschungsprojekte zu den hinsichtlich des Einsatzes von Lang-Lkw relevanten Fragestellungen. Die Teilprojekte, die von externen Forschungsnehmern bearbeitet wurden, sind als selbstständige Publikationen verfügbar. Dort finden sich detailliertere Informationen zu den einzelnen Untersuchungen. Insgesamt galt es herauszuarbeiten, welche Auswirkungen der Einsatz von Lang-Lkw im Vergleich zur Situation ohne Lang-Lkw auf die identifizierten Fragestellungen hat. Zusammenfassend lässt sich feststellen, dass sich neben den festgestellten positiven Effekten, wie einem Effizienzgewinn und der Einsparung von Lkw-Fahrten, gravierende Probleme im Feldversuch unter den gegebenen Randbedingungen bislang nicht gezeigt haben. Gemessen an der Vielzahl betrachteter Fragestellungen ist die Anzahl der identifizierten Risiken gering. Zudem sind die identifizierten Risiken bei der derzeit vorhandenen Anzahl von im Feldversuch beteiligten Lang-Lkw und auch noch unter der Annahme von deutlich höheren Anteilen von Lang-Lkw am Güterverkehrsaufkommen als hinnehmbar oder zumindest beherrschbar einzustufen. Einzig für den Umstand der für Lang-Lkw in der Regel zu kurzen Schrägparkstände auf Rastanlagen müssten bei einer steigenden Anzahl an Lang-Lkw Lösungsansätze entwickelt werden, um das regelkonforme Abstellen der Lang-Lkw auch auf Rastanlagen weiterhin gewährleisten zu können. Zu beachten ist hinsichtlich der Gesamteinschätzung zudem, dass den erzielten Ergebnissen in der Regel die ganz spezifischen Randbedingungen des Feldversuchs zugrunde liegen. Teilweise resultieren diese Randbedingungen aus den Vorgaben der Ausnahme-Verordnung zum Feldversuch, in Einzelfällen auch aus dem unter Versuchsbedingungen angepassten Verhalten der Lang-Lkw-Fahrer. Sofern sich an diesen Randbedingungen Änderungen einstellen sollten oder die Unternehmen die heute geltenden Freiheitsgrade deutlicher ausnutzen, sind gewisse Fragestellungen neu zu beleuchten. Somit zeigt der Zwischenbericht in seinem Fazit zusammenfassend auf, dass an einzelnen Punkten weiter Forschungsbedarf besteht. Bis zum Ende des Feldversuchs wird die BASt diesen Fragen nachgehen und Nacherhebungen zur Validierung der bisherigen Ergebnisse durchführen können.
Abbiegeunfälle mit Kollisionen zwischen rechtsabbiegenden Güterkraftfahrzeugen und Fahrrädern haben in der Regel schwerwiegende Folgen für den ungeschützten Verkehrsteilnehmer. In der Vergangenheit wurde durch eine steigende Anzahl von Spiegeln das individuelle Sichtfeld des Lkw-Fahrers vergrößert und die Sicherheit für ungeschützte Verkehrsteilnehmer durch den Seitenunterfahrschutz verbessert. Da Abbiegeunfälle trotz der Vielzahl an Spiegeln auch heute noch geschehen, gleichzeitig aber Fahrerassistenzsysteme Einzug in viele Fahrzeugklassen gehalten haben, liegt es nahe, derartige Systeme für die Verhinderung von Abbiegeunfällen zu nutzen. Um entsprechende Systementwicklungen fördern zu können oder aber auch Systeme vorschreiben zu können, sind Anforderungen und passende Testmethoden für Abbiegeassistenzsysteme erforderlich. Ziel der BASt war es, solche Anforderungen und ein mögliches Testverfahren hierfür zu entwickeln. Ausgehend von Analysen des Unfallgeschehens wurden charakteristische Parameter und Begleitumstände von Unfällen zwischen Fahrrädern und rechtsabbiegenden Lkw identifiziert. Aus fahrdynamischen Überlegungen folgt bei den gegebenen Parametern, dass nur eine frühe, aber niederschwellige Fahrerinformation eine wirkungsvolle Assistenzfunktion zur Verhinderung der Unfälle sein kann. Für automatische Bremsungen gibt es bisher noch zu wenig Erfahrungen im Feld, und klassische, hochschwellige, aber sehr spät erfolgende Warnsignale würden durch die dann noch verstreichende Reaktionszeit keine rechtzeitige Bremsung des Lkw-Fahrers mehr hervorrufen. Basierend auf dem identifizierten Parameterraum, der zum komfortablen Anhalten erforderlichen Zeit und einem geeigneten Kinematikmodell lassen sich die räumlichen Bereiche um den Lkw definieren, in dem eine Umfelderkennung den Fahrradfahrer detektieren können muss, damit das Informationssignal durch das Assistenzsystem an den Lkw-Fahrer rechtzeitig ausgegeben wird. Aktuell wird davon ausgegangen, dass ein Abbiegeassistenzsystem, das die hier beschriebenen Prüfungen besteht, einen sehr positiven Einfluss auf das Unfallgeschehen zwischen rechtsabbiegenden Lkw und Fahrrädern haben wird.
This paper presents findings of a laboratory experiment which aimed at evaluating the sensitivity and intrusiveness of Tactile Detection Response Task (TDRT) methodology. Various single-task, dual-task and triple-task scenarios were compared. The task scenarios included a surrogate of driving (tracking task) and different secondary tasks (N-back, surrogate reference task (SuRT)). The results suggest that the TDRT is sensitive to load levels of secondary tasks which primarily demand for cognitive resources (N-back). Sensitivity to variations of visual"manual load could not be shown (SuRT). TDRT seems also to be able to differentiate between modes of primary task which varies in terms of cognitive load (visual against auditory tracking task). Results indicated intrusiveness of TDRT on primary task performance and secondary task performance depending on the type of underlying task scenario. As a conclusion, TDRT can be recommended as a method to assess attentional effects of cognitive load of a secondary task, but should be used with caution for secondary tasks with strong motor demands.
The project UR:BAN "Cognitive assistance (KA)" aims at developing future assistance systems providing improved performance in complex city traffic. New state-of-the-art panoramic sensor technologies now allow comprehensive monitoring and evaluation of the vehicle environment. In order to improve protection of vulnerable road users such as pedestrians and cyclists, a particular objective of UR:BAN is the evaluation and prediction of their behaviour and actions. The objective of subproject "WER" is development support by providing quantitative estimates of traffic collisions at the very start and predict potential in terms of optimized accident avoidance and reduction of injury severity. For this purpose an integrated computer simulation toolkit is being devised based on real world accidents (GIDAS as well as video documented accidents), allowing the prediction of potential effectiveness and future benefit of assistance systems in this accident scenario. Subsequently, this toolkit may be used for optimizing the design of implemented assistance systems for improved effectiveness.
Established in 1997, the European New Car Assessment Programme (Euro NCAP) provides consumers with a safety performance assessment for the majority of the most popular cars in Europe. Thanks to its rigorous crash tests, Euro NCAP has rapidly become an important driver safety improvement to new cars. After ten years of rating vehicles, Euro NCAP felt that a change was necessary to stay in tune with rapidly emerging driver assistance and crash avoidance systems and to respond to shifting priorities in road safety. A new overall rating system was introduced that combines the most important aspects of vehicle safety under a single star rating. The overall rating system has allowed Euro NCAP to continue to push for better fitment and higher performance for vehicles sold on the European market. In the coming years, the safety rating is expected to play an important role in the support of the roll-out of highly automated vehicles.
Estimation of the effects of new emission standards on motorcycle emissions by means of modeling
(2016)
Road traffic is, in addition to the energy sector and the industry, one main source of air pollution and carbon dioxide emissions. Although most countries and manufacturers agreed to environmental regulations to reduce the pollutant emissions, particularly in urban areas with high traffic density, the impact of road traffic emissions on the environment and human health has been growing in importance steadily. Due to stricter emission standards and the binding use of emission-reducing systems (e.g. three-way catalyst) hydrocarbon emissions from passenger cars have been reduced significantly since the last two decades. Unlike to passenger cars the emissions standards of powered two-wheelers have not been adjusted since 2006 although their share of hydrocarbon emissions to the total amount of hydrocarbon emissions of road traffic is estimated to be disproportionately high. Due to the new regulation (EU) No. 168/2013 powered two-wheelers have to fulfill new emission standards from 2016 (Euro 4) and 2020 (Euro 5) onwards. Besides new limits for the tailpipe emissions the evaporative emissions are regulated separately for the first time, as they make up a high proportion to the total hydrocarbon emissions in this vehicle class. In this context, the calculation and forecast of road traffic emissions is an important tool to verify compliance of climate targets and to assess the reduction potential of emission-reducing systems. For that purpose the Federal Highway Research Institute (BASt) uses the emission- and calculation tool TREMOD (Transport Emission Model) which provides baseline data and calculated results for pollutants in almost every differentiation e.g. vehicle category, traffic situation and road type. Moreover, estimations of future emission trends, stock information and mileage distribution can be made. The main objective is to illustrate the impact of the upcoming emission standards Euro 4 and Euro 5 on the operational hydrocarbon emissions of powered two-wheelers based on statistical estimations. The significant aspect is to generate scenarios to show the reduction potential of hydrocarbon emissions of powered two-wheelers, differentiated into motorcycles and small motorcycles, in relation to the total share of hydrocarbon emissions in this vehicle class and to the total hydrocarbon emissions from road traffic. As a part of their research, the authors can make initial statements about the possible effect of the new emission standards of regulation (EU) No. 168/2013 by means of modeling with TREMOD.
There is considerable evidence for the negative effects of driver distraction on road safety. In many experimental studies, drivers have been primarily viewed as passive receivers of distraction. Thus, there is a lack of research on the mediating role of their self-regulatory behavior. The aim of the current study was to compare drivers' performance when engaged in a system-paced secondary task with a self-paced version of this task and how both differed from baseline driving performance without distraction. Thirty-nine participants drove in a simulator while performing a secondary visual"manual task. One group of drivers had to work on this task in predefined situations under time pressure, whereas the other group was free to decide when to work on the secondary task (self-regulation group). Drivers' performance (e.g., lateral and longitudinal control, brake reaction times) was also compared with a baseline condition without any secondary task. For the system-paced secondary task, distraction was associated with high decrements in driving performance (especially in keeping the lateral position). No effects were found for the number of collisions, probably because of the lower driving speeds while distracted (compensatory behavior). For the self-regulation group, only small impairments in driving performance were found. Drivers engaged less in the secondary task during foreseeable demanding or critical driving situations. Overall, drivers in the self-regulation group were able to anticipate the demands of different traffic situations and to adapt their engagement in the secondary task, so that only small impairments in driving performance occurred. Because in real traffic drivers are mostly free to decide when to engage in secondary tasks, it can be concluded that self-regulation should be considered in driver distraction research to ensure ecological validity.
Motorcycling is a fascinating kind of transportation. While the riders' direct exposure to the environment and the unique driving dynamics are essential to this fascination, they both cause a risk potential which is several times higher than when driving a car. This chapter gives a detailed introduction to the fundamentals of motorcycle dynamics and shows how its peculiarities and limitations place high demands on the layout of dynamics control systems, especially when cornering. The basic principles of dynamic stabilization and directional control are addressed along with four characteristic modes of instability (capsize, wobble, weave, and kickback). Special attention is given to the challenges of braking (brake force distribution, dynamic over-braking, kinematic instability, and brake steer torque induced righting behavior). It is explained how these challenges are addressed by state-of-the-art brake, traction, and suspension control systems in terms of system layout and principles of function. It is illustrated how the integration of additional sensors " essentially roll angle assessment " enhances the cornering performance in all three categories, fostering a trend to higher system integration levels. An outlook on potential future control systems shows exemplarily how the undesired righting behavior when braking in curves can be controlled, e.g., by means of a so-called brake steer torque avoidance mechanism (BSTAM), forming the basis for predictive brake assist (PBA) or even autonomous emergency braking (AEB). Finally, the very limited potential of brake and chassis control to stabilize yaw and roll motion during unbraked cornering accidents is regarded, closing with a promising glance at roll stabilization through a pair of gimbaled gyroscopes.
In line with the new definition introduced by the European Commission (EC), the number of seriously injured road casualties in Germany for 2014 is assessed in this study. The number of MAIS3+ casualties is estimated by two different methodological approaches. The first approach is based on data from the German Inâ€Depth Accident Study (GIDAS), which is closely related to the German Road Traffic Accident Statistics. The second approach is based on data from the German TraumaRegister DGU-® (TRâ€DGU), which includes many more hospitals but not all MAIS3+ injuries.
Kamera-Monitor-Systeme (KMS) können bei Kraftfahrzeugen dazu verwendet werden, die Sicht nach hinten für den Fahrer auf einem im Fahrzeug montierten Monitor darzustellen. Dies bietet auch die Möglichkeit, herkömmliche Außenspiegel durch geeignete KMS zu ersetzen und damit neue Designvarianten mit aerodynamischen Vorteilen umsetzen zu können. Da es sich bei den Außenspiegeln jedoch um ein sicherheitsrelevantes Fahrzeugteil zur Gewährleistung der indirekten Sicht nach hinten handelt (Anforderungen sind in der UN-Regelung Nr. 46 festgelegt), stellt sich die Frage, ob KMS einen gleichwertigen Ersatz für Spiegel bieten können. In der vorliegenden Studie wurden das KMS und der herkömmliche Außenspiegel während der Durchführung von Versuchsfahrten und statischen Tests unter verschiedenen äußeren Bedingungen verglichen und bewertet. Untersuchungsgegenstand waren zum einen technische Aspekte, zum anderen Fragestellungen zur Gestaltung der Mensch-Maschine-Interaktion. Für die Versuche mit Pkw standen zwei Fahrzeuge zur Verfügung: Ein Fahrzeug, das in Kleinserie hergestellt wird und bereits nur mit KMS als Ersatz für Außenspiegel ausgerüstet ist, sowie ein Fahrzeug der Kompaktklasse, an dem sowohl ein KMS als Nachrüstsatz verbaut war als auch die herkömmlich vorhandenen Außenspiegel. Letztere konnten für Fahrten ausschließlich mit KMS abgedeckt werden. Für die Versuche am Lkw stand eine Sattelzugmaschine mit Auflieger zur Verfügung. Die Fahrerkabine war mit einem nachgerüsteten KMS ausgestattet. Grundsätzlich hat sich gezeigt, dass es möglich ist, die indirekte Sicht nach hinten sowohl bei Pkw als auch bei Lkw durch KMS, die gewisse Qualitätskriterien erfüllen, für den Fahrer ausreichend darstellen zu können. Je nach Ausgestaltung bietet ein KMS sogar die Möglichkeit, mehr Information über den rückwärtigen Raum zu präsentieren als es mit Spiegelsystemen möglich ist. Es hat sich auch gezeigt, dass der Umstieg von Spiegeln auf KMS immer einer gewissen Gewöhnungsphase bedarf, diese jedoch verhältnismäßig kurz ist und nicht notwendigerweise zu sicherheitskritischen Situationen führt.
Camera-monitor systems (CMS) can be used in motor vehicles to display the driver's rear view on a monitor mounted inside the vehicle. This also offers the possibility of replacing conventional exterior mirrors with suitable CMS and thereby implementing new design concepts with aerodynamic advantages. However, as exterior mirrors are safety-relevant vehicle parts for securing the driver's indirect rear view (requirements specified in UN Regulation No. 46), the question arises whether CMS can provide an equivalent substitute for mirrors. In the scope of this study, CMS and conventional exterior mirrors were compared and assessed in test drives and static tests under different external conditions. On the one hand, the examination of technical aspects, and on the other hand, issues pertaining to the design of the human-machine interaction, were the objects of the study. Two vehicles were available for the trials with passenger vehicles: A vehicle, manufactured in small series, which is already equipped with CMS as sole replacement for the exterior mirrors, as well as a compact class vehicle which had a CMS retrofitted by the car manufacturer in addition to conventionally used exterior mirrors. The latter could be covered exclusively for trips with CMS. A tractor unit with semitrailer was available for the truck trials. The driver's cabin was equipped with a CMS system developed by the vehicle manufacturer. In general, it was shown that it is possible to display the indirect rear view sufficiently for the driver, both for cars and trucks, using CMS which meet specific quality criteria. Depending on the design, it is even possible to receive more information about the rear space from a CMS than is possible with mirror systems. It was also shown that the change from mirrors to CMS requires a certain period of familiarisation. However, this period is relatively short and does not necessarily result in safety-critical situations.
Statischer und dynamischer Fahrsimulator im Vergleich: Wahrnehmung von Abstand und Geschwindigkeit
(2016)
Die Methodik der experimentellen Fahrsimulation gewährleistet sichere Anwendungsforschung unter hoher Kontrollierbarkeit. Obwohl gegenwärtig viele Forschungsfragen in virtuellen Umgebungen beantwortet werden, existieren weder systematische Validierungsszenarien für Fahrsimulatoren, noch wurde die Vergleichbarkeit der Aussagekraft von Befunden aus Fahrsimulatoren mit und ohne Bewegungssystem bislang angemessen hinterfragt. Daher sollen in der vorliegenden Studie ein statischer und ein dynamischer Fahrsimulator hinsichtlich ihrer Validität in verschieden Fahrsituationen verglichen werden, wobei der Schwerpunkt auf Abstands- und Geschwindigkeitswahrnehmung liegt. Es wird erwartet, dass ein zusätzliches Bewegungssystem nur bei Fahraufgaben mit dynamischer Involvierung einen Redundanzgewinn für die Wahrnehmung des Fahrers liefert. Werden hingegen konstante Abstände eingehalten, sollten entsprechend der Hypothese beide Prüfumgebungen äquivalente Resultate zeigen. Insgesamt durchfuhren 60 Probanden Fahrszenarien zur Abstandsherstellung und -einschätzung, teils mit Okklusion, sowie Folgefahrten mit Beschleunigung und Verzögerung. Die Querführung wurde mithilfe einer Gassendurchfahrt untersucht. Indem die virtuelle Umgebung nach Vorbild einer real existierenden Teststrecke konstruiert wurde, kann ebenfalls auf reale Referenzwerte Bezug genommen werden. Die Ergebnisse weisen auf eine vergleichbare relative Validität zwischen statischem und dynamischem Simulator hin, wenn keine Kinetik in der Fahraufgabe vorhanden ist. In Beschleunigungssituationen bewirkt simulierte Fahrdynamik signifikante Wahrnehmungseinbußen, wobei das Bewegungssystem in Bremssituationen die Wahrnehmung signifikant unterstützt. In dem Querführungsszenario ist die Fahrgeschwindigkeit im statischen Simulator zwar signifikant höher und damit näher an der realen Referenz, allerdings wird im statischen Simulator eine auffällig nach rechts versetzte Spur gehalten. Dennoch, so der vorrangige Befund, sollte auch ein statischer Fahrsimulator valide Evaluationen für die meisten Fahraufgaben gewährleisten.
Automated driving will provide many kinds of benefits - some direct and some indirect. The benefits originate at the individual level, from changes in the behaviour of drivers and travellers with regard to driving and mobility, ending up with benefits at the social level via changes in the whole transport system and society, where many of the current planning and operations paradigms are likely to be transformed by automated driving. There may also be disbenefits, particularly at a social level, for example in intensity of travel which could result in additional congestion and increased use of natural resources. There may also be unintended consequences. For example, we do not know the impacts on public transport: driverless vehicles could provide a means to a lower cost service provision, but the availability of automated cars could lead to more car travel at the expense of collective transport.
Automatische Lenkfunktionen sind abgesehen von korrigierenden Lenkeingriffen entsprechend der UN-Regelung Nr. 79 bisher nur in einem Geschwindigkeitsbereich bis 10 km/h erlaubt. Die Weiterentwicklung der Technik im Bereich der Fahrerassistenzsysteme und der Automatisierung der Fahraufgabe wuerden es jedoch technisch erlauben, automatische Lenkfunktionen auch bei höheren Geschwindigkeiten einzusetzen. Neben einem Zugewinn an Komfort wird von diesen Systemen auch ein Beitrag zur Erhöhung der Verkehrssicherheit erwartet. Dieses Verkehrssicherheitspotenzial wird man jedoch nur ausschöpfen können, wenn die automatisierten Lenksysteme entsprechend gestaltet sind. Insbesondere sollten mögliche Risiken auf Grund automatischen Lenkens minimiert sein. Aus diesen Gründen laufen derzeit Arbeiten auf UNECE-Ebene, die Regelung Nr. 79 über einheitliche Bedingungen für die Genehmigung der Fahrzeuge hinsichtlich der Lenkanlage in Bezug auf automatische Lenkfunktionen (ACSF = Automatically Commanded Steering Functions) zu überarbeiten, um diese unter bestimmten Bedingungen auch bei höheren Geschwindigkeiten genehmigen zu können. Der vorliegende Beitrag reflektiert diese Arbeiten und stellt die Entwicklung der technischen Anforderungen an automatisches Lenken und der für die fahrzeugtechnischen Vorschriften vorgesehenen Testprozeduren dar.
Die Kommunikation zwischen Fahrzeugen und Infrastrukturkomponenten steht vor der Einführung in Europa. Dieser Beitrag stellt zunächst die grundlegende Technologie zum Austausch von Nachrichten und ein Pilotprojekt vor, innerhalb dessen eine sichere Fahrzeug-zu-Infrastruktur Kommunikation konzipiert und praktisch erprobt wird. Darauf aufbauend werden Sicherheitsfragestellungen von Infrastrukturkomponenten beleuchtet und ein Einblick in das Schlüsselmanagement sowohl für Fahrzeuge als auch Infrastrukturkomponenten gegeben.
A reduction of around 48% of all road fatalities was achieved in Europe in the past years including a reduced number of fatalities with an older age. However, among all road fatalities, the proportion of elderly is steadily increasing. In an ageing society, the European (Horizon2020) project SENIORS aims to improve the safe mobility of older road users, who have different transportation habits compared to other age groups. To increase their level of safe mobility by determining appropriate requirements for vehicle safety systems, the characteristics of current road traffic collisions involving the elderly and the injuries that they sustain need to be understood in detail. Hereby, the paper focuses on their traffic participation as pedestrian, cyclist or passenger car occupant. Following a literature review, several national and international crash databases and hospital statistics have been analysed to determine the body regions most frequently and severely injured, specific injuries sustained and types of crashes involved, always comparing older road users (65 years and more) with mid-aged road users (25-64 years). The most important crash scenarios were highlighted. The data sources included European statistics from CARE, data on national level from Germany, Sweden, Italy, United Kingdom and Spain as well as in-depth crash information from GIDAS (Germany), RAIDS (UK), CIREN and NASS-CDS (US). In addition, familiar hospital data from Germany (TraumaRegister DGU-®), Italy (Italian Register of Acute Traumas) and UK hospital statistics (TARN) were included in the study to gain further insight into specific injury patterns. Comprehensive data analyses were performed showing injury patterns of older road users in crashes. When comparing with mid-aged road users, all databases showed that the thorax body region is of particularly high importance for the older car occupant with injury severities of AIS 2 or AIS 3+, whereas the body regions lower extremities, head and thorax need to be considered for the older pedestrians and cyclists. Besides these comparisons, the most frequent and severe top 5 injuries were highlighted per road user group. Further, the most important crash configurations were identified and injury risk functions are provided per age group and road user group. Although several databases have been analysed, the picture on the road safety situation of older road users in Europe was not complete, as only Western European data was available. The linkage between crash data and hospital data could only be made on a general level as their inclusion criteria were quite different.
Fahrzeuge, die mit alternativen Antrieben ausgestattet sind, machen 2013 lediglich etwa 2 Prozent des Pkw-Gesamtbestandes aus. Um jedoch die zukünftige Entwicklung von Fahrzeugen mit alternativem Antrieb in Deutschland analysieren und mögliche negative Auswirkungen auf die Verkehrssicherheit identifizieren zu können, ist eine langfristige Beobachtung des Fahrzeugmarktes und des Unfallgeschehens notwendig. Der vorliegende Bericht zeigt in den Kapiteln 2 und 3 die technischen Entwicklungen von Fahrzeugen mit alternativem Antrieb auf und gibt einen Überblick über die Rahmenbedingungen des deutschen Marktes bis 2015. In den Kapiteln 4 und 5 werden der Bestand sowie das Unfallgeschehen näher betrachtet. Der Bericht liefert in diesem statistischen Teil Daten für das Berichtsjahr 2013.
Advancing active safety towards the protection of vulnerable road users: the PROSPECT project
(2017)
Accidents involving Vulnerable Road Users (VRU) are still a very significant issue for road safety. According to the World Health Organisation, pedestrian and cyclist deaths account for more than 25% of all road traffic deaths worldwide. Autonomous Emergency Braking Systems have the potential to improve safety for these VRU groups. The PROSPECT project (Proactive Safety for Pedestrians and Cyclists) aims to significantly improve the effectiveness of active VRU safety systems compared to those currently on the market by expanding the scope of scenarios addressed by the systems and improving the overall system performance. The project pursues an integrated approach: Newest available accident data combined with naturalistic observations and HMI guidelines represent key inputs for the system specifications, which form the basis for the system development. For system development, two main aspects are considered: advanced sensor processing with situation analysis, and intervention strategies including braking and steering. All these concepts are implemented in several vehicle prototypes. Special emphasis is put on balancing system performance in critical scenarios and avoiding undesired system activations. For system validation, testing in realistic scenarios will be done. Results will allow the performance assessment of the developed concepts and a cost-benefit analysis. The findings within the PROSPECT project will contribute to the generation of state -of-the-art knowledge, technical innovations, assessment methodologies and tools for advancing Advanced Driver Assistance Systems towards the protection of VRUs. The introduction of a new generation safety system in the market will enhance VRU road safety in 2020-2025, contributing to the "Vision Zero" objective of no fatalities or serious injuries in road traffic set out in the Transport White Paper. Furthermore, the test methodologies and tools developed within the project shall be considered for the New Car Assessment Programme (Euro NCAP) future roadmaps, supporting the European Commission goal of halving the road toll in the 2011-2020 timeframe.
Europe has benefited from a decreasing number of road traffic fatalities. However, the proportion of older road users increases steadily. In an ageing society, the SENIORS project aims to improve the safe mobility of older road users by determining appropriate requirements towards passive vehicle safety systems. Therefore, the characteristics of road traffic crashes involving the elderly people need to be understood. This paper focuses on car occupants and pedestrians or cyclists in crashes with modern passenger cars. Ten crash databases and four hospital statistics from Europe have been analysed to answer the questions on which body regions are most frequently and severely injured in the elderly, and specific injuries sustained by always comparing older (65 years and above) with midâ€aged road users (25â€64 years). It was found that the body region thorax is of particularly high importance for the older car occupant with injury severities of AIS2 or AIS3+, where as the lower extremities, head and the thorax need to be considered for older pedestrians and cyclists. Further, injury risk functions were provided. The hospital data analysis showed less difference between the age groups. The linkage between crash and hospital data could only be made on a general level as their inclusion criteria were quite different.
The presence and performance of Advanced Driver Assistance Systems (ADAS) has increased over last years. Systems available on the market address also conflicts with vulnerable road users (VRUs) such as pedestrians and cyclists. Within the European project PROSPECT (Horizon2020, funded by the EC) improved VRU ADAS systems are developed and tested. However, before determining systems" properties and starting testing, an up-to-date analysis of VRU crashes was needed in order to derive the most important Use Cases (detailed crash descriptions) the systems should address. Besides the identified Accident Scenarios (basic crash descriptions), this paper describes in short the method of deriving the Use Cases for car-to-cyclist crashes. Method Crashes involving one passenger car and one cyclist were investigated in several European crash databases looking for all injury severity levels (slight, severe and fatal). These data sources included European statistics from CARE, data on national level from Germany, Sweden and Hungary as well as detailed accident information from these three countries using GIDAS, the Volvo Cars Cyclist Accident database and Hungarian in-depth accident data, respectively. The most frequent accident scenarios were studied and Use Cases were derived considering the key aspects of these crash situations (e.g., view orientation of the cyclist and the car driver- manoeuvre intention) and thus, form an appropriate basis for the development of Test Scenarios. Results Latest information on car-to-cyclist crashes in Europe was compiled including details on the related crash configurations, driving directions, outcome in terms of injury severity, accident location, other environmental aspects and driver responsibilities. The majority of car-to-cyclist crashes occurred during daylight and in clear weather conditions. Car-to-cyclist crashes in which the vehicle was traveling straight and the cyclist is moving in line with the traffic were found to result in the greatest number of fatalities. Considering also slightly and seriously injured cyclists led to a different order of crash patterns according to the three considered European countries. Finally the paper introduced the Use Cases derived from the crash data analysis. A total of 29 Use Cases were derived considering the group of seriously or fatally injured cyclists and 35 Use Cases were derived considering the group of slightly, seriously or fatally injured cyclists. The highest ranked Use Case describes the collision between a car turning to the nearside and a cyclist riding on a bicycle lane against the usual driving direction. A unified European dataset on car-to-cyclist crash scenarios is not available as the data available in CARE is limited, hence national datasets had to be used for the study and further work will be required to extrapolate the results to a European level. Due to the large number of Use Cases, the paper shows only highest ranked ones.
PROSPECT (Proactive Safety for Pedestrians and Cyclists) is a collaborative research project involving most of the relevant partners from the automotive industry (including important active safety vehicle manufacturers and tier-1 suppliers) as well as academia and independent test labs, funded by the European Commission in the Horizon 2020 research program. PROSPECT's primary goal is the development of novel active safety functions, to be finally demonstrated to the public in three prototype vehicles. A sound benefit assessment of the prototype vehicle's functionality requires a broad testing methodology which goes beyond what has currently been used. Since PROSPECT functions are developed to prevent accidents in intersections, a key aspect of the test methodology is the reproduction of natural driving styles on the test track with driving robots. For this task, data from a real driving study with subjects in a suburb of Munich, Germany was used. Further data from Barcelona will be available soon. The data suggests that intersection crossing can be broken down into five phases, two phases with straight deceleration / acceleration, one phase with constant radius and speed turning, and two phases where the bend is imitated or ended. In these latter phases, drivers mostly combine lateral and longitudinal accelerations and drive what is called a clothoid, a curve with curvature proportional to distance travelled, in order to change lateral acceleration smoothly rather than abrupt. The data suggests that the main parameter of the clothoid, the ratio distance travelled to curvature, is mostly constant during the intersections. This parameter together with decelerations and speeds allows the generation of synthetic robot program files for a reproduction of natural driving styles using robots, allowing a much greater reproducibility than what is possible with human test drivers. First tests show that in principle it is possible to use the driving robots for vehicle control in that manner; a challenge currently is the control performance of the robot system in terms of speed control, but it is anticipated that this problem will be solved soon. Further elements of the PROSPECT test methodology are a standard intersection marking to be implemented on the test track which allows the efficient testing of all PROSPECT test cases, standard mobile and light obstruction elements for quick reproduction of obstructions of view, and a concept for tests in realistic surroundings. First tests using the PROSPECT test methodology will be conducted over the summer 2017, and final tests of the prototype vehicles developed within PROSPECT will be conducted in early 2018
The UN Regulation No. 79 is going to be amended to allow automatically commanded steering functions (ACSF) at speeds above 10 km/h. Hence, requirements concerning the approval of automatically performed steering manoeuvres have to be set in order to allow safe use of automatic steering on public roads as well as improve overall road safety for the driver and the surroundings. By order of the German Federal Ministry of Transport and Digital Infrastructure (BMVI), BASt developed and verified physical test procedures for automatic steering to be implemented in UN Regulation No. 79. The usability of currently available test tools was examined. The paper at hand describes these test procedures and presents results from verification tests. The designated tests are divided in three sections: functionality tests, verifications for the transition of control and emergency tests. System functionality tests are auto matic lane keeping, automatic lane change and an automatic abort of an initiated lane change due to traffic. Those tests check if the vehicle remains in its lane (under normal operating conditions), is able to perform safe automatic lane change manoeuvres and if it considers other road users during its manoeuvres. Transition tests examine the vehicle's behaviour when the driver fails to monitor the system and in situations when the system has to hand over the steering control back to the driver. For instance these tests provoke driver-in-the-loop requests by approaching system boundary limitations, like missing lane markings, surpassing maximum lateral acceleration in a bend or even a major system failure. Even further the driver and his inputs are monitored and if the system detects that he is overriding system actions or contrary want to quit the driving task and unfastens the seat belt, it has to shut down and put the human back into manually control and the responsibility of driving. The last series of test consists of two emergency situations in which the system has to react to a time critical event: A hard decelerating vehicle and a stationary vehicle in front both with no lane change possibility for the ACSF vehicle. Some of the tests, especially the emergency manoeuvres, require special target vehicles and propulsion systems. Since no fully automatic steering vehicles are available, a current Mercedes E-Class with Mercedes' "drive pilot" system was used. It was shown that the vehicle is automatically able to brake to a full stop towards a static Euro NCAP target from partial-automatic driving at 90 km/h, that it could brake towards a rapidly decelerating lead vehicle when travelling at 70 km/h, that it was able during partially automatic driving to remain in its lane in normal operation conditions and to perform a automatic (driver initiated) lane change while surveilling the driver- activities.
Schutz von schwächeren Verkehrsteilnehmern: kommende Anforderungen aus Gesetzgebung und Euro NCAP
(2017)
Systeme der aktiven Fahrzeugsicherheit, insbesondere Notbremsassistenzsysteme und automatische Notbremssysteme, haben in den letzten zwei Dekaden große technische Fortschritte gemacht, und das im Wesentlichen ohne "Druck" von Gesetzgeber oder unabhängigen Testorganisationen " diese können aber durch passende Anforderungen den Vormarsch der Systeme in die Breite und die Ausnutzung von ansonsten für den Hersteller vielleicht nicht wirtschaftlichen Potentialen unterstützen. Dieser Bericht hat das Ziel, einen Überblick über die kommenden Anforderungen an Schutzsysteme für schwächere Verkehrsteilnehmer zu geben und diese Anforderungen in den Kontext Euro NCAP (=welchen Einfluss haben diese Anforderungen auf die Gesamtbewertung?) sowie Gesetzgebung (schwächere Anforderungen, aber dafür ein Markteintrittskriterium) zu stellen: - Anforderungen und Testprozeduren für Notbremsassistenz Fahrradunfälle 2018 und 2020 in Euro NCAP; - Anforderungen und Testprozeduren für Notbremsassistenz bei Nachtunfällen mit Fußgängern in Euro NCAP 2018; - Anforderungen und Testprozeduren für Abbiegeassistenzsysteme zum Schutz von Radfahrern in Unfallsituationen mit rechtsabbiegenden Lkw innerhalb der Fahrzeugtypgenehmigung.
Except for corrective steering functions automatic steering is up to now only allowed at speeds up to 10 km/h according to UN Regulation No. 79. Progress in automotive engineering with regard to driver assistance systems and automation of driving tasks is that far that it would be technically feasible to realise automatically commanded steering functions also at higher vehicle speeds. Besides improvements in terms of comfort these automated systems are expected to contribute to road traffic safety as well. However, this safety potential will only be exhausted if automated steering systems are properly designed. Especially possible new risks due to automated steering have to be addressed and reduced to a minimum. For these reasons work is currently ongoing on UNECE level with the aim to amend the regulation dealing with provisions concerning the approval of steering equipment. It is the aim to revise requirements for automatically commanded steering functions (ACSF) so that they can be approved also for higher speeds if certain performance requirements are fulfilled. The paper at hand describes the derivation of reasonable system specifications from an analysis of relevant driving situations with an automated steering system. Needs are explained with regard to covering normal driving, sudden unexpected critical events, transition to manual driving, driver availability and manoeuvres to reach a state of minimal risk. These issues form the basis for the development of test procedures for automated steering to be implemented in international regulations. This holds for system functionalities like automatic lane keeping or automatic lane change as well as for addressing transition situations in which the system has to hand over steering to the driver or addressing emergency situations in which the system has to react instead of the driver.
Accidents between right turning trucks and straight driving cyclists often show massive consequences. Accident severity in terms of seriously or fatally injured cyclists that are involved is much higher than in accidents of other traffic participants in other situations. It seems clear that adding additional mirrors will very likely not improve the situation. At ESV 2015, a methodology to derive test procedures and first test cases as well as requirements for a driver assist system to address blind spot accidents has been presented. However, it was unclear if and how testing of these cases is feasible, to what extent characteristics of different truck concepts (e.g. articulated vehicles, rigid vehicles) influence the test conduction and outcome, and what tolerances should be selected for the different variables. This work is important for the acceptance of a draft regulation in the UN working group on general safety. In the meantime, three test series using a single tractor vehicle, a tractor-semitrailer combination and a rigid vehicle have been conducted. The test tools (e.g. surrogate devices) have been refined. A fully crashable, commercially available bicycle dummy has been tested. If used correct, this dummy does follow a straight line quite precisely and it does not cause any damage to the truck under test in case of accidental impact. The dummy specifications are freely available. During testing, the different vehicle categories resulted in different trajectories being driven. Articulated vehicle combinations did first execute a turn into the opposite direction, and on the other hand, single tractor vehicles did behave comparable to passenger cars. A possible solution to take these behaviors into account is to require the vehicles to drive through a corridor that is narrow for a precise straight-driving phase and extends during the turn. Other investigated parameters are the dummy and vehicle speed tolerances. The results from this research make it possible to draft a regulation for a driver assistance system that helps to avoid blind spot accidents: test cases have been refined, their feasibility has been checked, and corridors for the vehicles and for important parameters (e.g. test speeds) have been set. The test procedure is applicable to all types of heavy goods vehicles. In combination with the accidentology (ESV 2015 paper), the work provides the basis for a regulation for such an assistance system.
One main objective of the EU-Project SENIORS is to provide improved methods to assess thoracic injury risk to elderly occupants. In contribution to this task paired simulations with a THOR dummy model and human body model will be used to develop improved thoracic injury risk functions. The simulation results can provide data for injury criteria development in chest loading conditions that are underrepresented in PMHS test data sets that currently proposed risk functions are based on. To support this approach a new simplified generic but representative sled test fixture and CAE model for testing and simulation were developed. The parameter definition and evaluation of this sled test fixture and model is presented in this paper. The justification and definition of requirements for this test set-up was based on experience from earlier studies. Simple test fixtures like the gold standard sled fixture are easy to build and also to model in CAE, but provide too severe belt-only loading. On the other hand a vehicle buck including production components like airbag and seat is more representative, but difficult to model and to be replicated at a different laboratory. Furthermore some components might not be available for physical tests at later stage. The basis of the SENIORS generic sled test set-up is the gold standard fixture with a cable seat back and foot rest. No knee restraint was used. The seat pan design was modified including a seat ramp. The three-point belt system had a generic adjustable load limiter. A pre-inflated driver airbag assembly was developed for the test fixture. Results of THOR test and simulations in different configurations will be presented. The configurations include different deceleration pulses. Further parameter variations are related to the restraint system including belt geometry and load limiter levels. Additionally different settings of the generic airbag were evaluated. The test set-up was evaluated and optimized in tests with the THOR-M dummy in different test configurations. Belt restraint parameters like D-ring position and load limiter setting were modified to provide moderate chest loading to the occupant. This resulted in dummy readings more representative of the loading in a contemporary vehicle than most available PMHS sled tests reported in the literature. However, to achieve a loading configuration that exposes the occupant to even less severe loading comparable to modern vehicle restraints it might be necessary to further modify the test set-up. The new generic sled test set-up and a corresponding CAE model were developed and applied in tests and simulations with THOR. Within the SENIORS project with this test set-up also volunteer and PMHS as well as HBM simulations are performed, which will be reported in other publications. The test environment can contribute in future studies to the assessment of existing and new frontal impact dummies as well as dummy improvements and related instrumentation. The test set-up and model could also serve as a new standard test environment for PMHS and volunteer tests as well as HBM simulations.
Für eine Reihe von EU Regelungen im Bereich Fahrzeugsicherheit erlaubt eine Verordnung bereits seit dem Jahr 2010 virtuelles Testen für die Typzulassungsprüfung. Technische Details bzw. konkrete Prozeduren für spezifische Regelungen sind in dieser Verordnung jedoch nicht enthalten. Das Hauptziel des europäischen Projekts IMVITER (lmplementation of Virtual Testing in Safety Regulations) war es, basierend auf der neuen Verordnung ein virtuelles Testverfahren auszuarbeiten und dabei offene Fragen zu berücksichtigen. Um die im Projekt-Konsortium unter Berücksichtigung der Anliegen aller Interessensgruppen wie Autohersteller, Zulassungsbehörden und technischer Dienste erarbeiteten offenen Punkte zu adressieren, wurde ein generisches Flussdiagramm entwickelt, das den Ablauf einer virtuell basierten Typprüfung darstellt. ln diesem Diagramm ist der virtuelle Typgenehmigungsprozess in drei aufeinander folgende Phasen aufgeteilt, die Verifikations-, Validierungs- und Typgenehmigungsphase. Von entscheidender Bedeutung ist die Phase der Validierung des Simulationsmodells, für die im IMVITER-Projekt eine Methodik vorgeschlagen wurde. Mit der im Projekt vorgeschlagenen Validierungsmethode ist kein Austausch des Simulationsmodells zwischen Fahrzeughersteller und technischem Dienst notwendig, so dass die Vertraulichkeit von Betriebsgeheimnissen nicht gefährdet ist. Zur Validierung des Modells werden jedoch immer Versuche notwendig sein. Dies gilt sowohl für die Überpruefung von passiven als auch aktiven Fahrzeugsicherheitssystemen. Eine zusammenfassende Betrachtung der Erfahrungen aus dem IMVITER-Projekt ergab, dass mit der Einführung von virtuellem Testen keine Erhöhung der Anforderungen an die Fahrzeugsicherheit bzgl. bestehender Regelungen verbunden sein sollte. Jedoch werden auch weiterhin neue zusäztliche Regelungen erforderlich sein, da sich das Unfallgeschehen und die Fahrzeugtechnologie weiterentwickeln und ändern werden. Diese sollten von Beginn an die Möglichkeiten des virtuellen Testens nutzen, insbesondere bei Testverfahren für neue Technologien, z.B. aktiver Fahrzeugsicherheitssysteme. Hier bieten virtuelle Testverfahren nicht nur eine Kosten- oder Zeitersparnis, sondern ermöglichen teilweise erst die sinnvolle Abprüfung von neuen Sicherheitssystemen, die mit aktuellen auf Hardware-Test basierenden Verfahren überhaupt nicht möglich wären.
Die Level kontinuierlicher Fahrzeugautomatisierung sind unter Fahrerassistenzexperten weithin bekannt und erleichtern das Verständnis. Sie können aber nicht Fahrzeugautomatisierung insgesamt zufriedenstellend beschreiben: Insbesondere temporär intervenierende Funktionen, die in unfallnahen Situationen eingreifen, können offensichtlich nicht nach dem Level kontinuierlicher Fahrzeugautomatisierung beschrieben werden. Diese beschreiben nämlich die zunehmende Aufgabenverlagerung vom Fahrer zur maschinellen Steuerung bei zunehmendem Automatisierungsgrad. Notbremsfunktionen, beispielsweise, sind offensichtlich diskontinuierlich und nehmen zugleich auf intensive Weise Einfluss auf die Fahrzeugsteuerung. Sie lassen sich gerade nicht sinnvoll nach dem Level kontinuierlicher Fahrzeugautomatisierung beschrieben. Das Ergebnis kann indes nicht zufriedenstellen. Die fehlende Sichtbarkeit dieser Funktionen wird ihrer Bedeutung für die Verkehrssicherheit nicht gerecht. Daher wird im Beitrag, um ein vollständiges Bild der Fahrzeugautomatisierung zu erlangen, ein umfassender Ansatz zur Beschreibung verfolgt, der sich auf oberster Ebene nach Wirkweise unterscheidet. Auf dieser Basis lassen sich sowohl informierende und warnende Funktionen als auch solche, die nur temporär in unfallgeneigten Situationen intervenieren, im Detail beschrieben. Das ermöglicht es, eine eigenständige Klassifikation für unfallgeneigte Situationen zu erstellen; dies kann für diese wichtigen Funktionen die eigenständige Sichtbarkeit herstellen, die ihrer Bedeutung gerecht wird.
Die Level kontinuierlicher Fahrzeugautomatisierung sind unter Fahrerassistenzexperten weithin bekannt und erleichtern das Verständnis. Sie können aber nicht Fahrzeugautomatisierung insgesamt zufriedenstellend beschreiben: Insbesondere temporär intervenierende Funktionen, die in unfallnahen Situationen eingreifen, können offensichtlich nicht nach dem Level kontinuierlicher Fahrzeugautomatisierung beschrieben werden. Diese beschreiben nämlich die zunehmende Aufgabenverlagerung vom Fahrer zur maschinellen Steuerung bei zunehmendem Automatisierungsgrad. Notbremsfunktionen, beispielsweise, sind offensichtlich diskontinuierlich und nehmen zugleich auf intensive Weise Einfluss auf die Fahrzeugsteuerung. Sie lassen sich gerade nicht sinnvoll nach dem Level kontinuierlicher Fahrzeugautomatisierung beschreiben. Das Ergebnis kann indes nicht zufriedenstellen: Die fehlende Sichtbarkeit dieser Funktionen wird ihrer Bedeutung für die Verkehrssicherheit nicht gerecht. Daher wird hier, um ein vollständiges Bild der Fahrzeugautomatisierung zu erlangen, ein umfassender Ansatz zur Beschreibung verfolgt, der auf oberster Ebene nach Wirkweise unterscheidet. Auf dieser Basis lassen sich sowohl informierende und warnende Funktionen als auch solche, die nur temporär in unfallgeneigten Situationen intervenieren, im Detail beschreiben. Das ermöglicht es, eine eigenständige Klassifikation für unfallgeneigte Situationen zu erstellen. Dies kann für diese wichtigen Funktionen die eigenständige Sichtbarkeit herstellen, die ihrer Bedeutung gerecht wird.
The levels of continuous vehicle automation have become common knowledge. They facilitate overall understanding of the issue. Yet, continuous vehicle automation described therein does not cover "automated driving" as a whole: Functions intervening temporarily in accident-prone situations can obviously not be classified by means of continuous levels. Continuous automation describes the shift in workload from purely human driven vehicles to full automation. Duties of the driver are assigned to the machine as automation levels rise. Emergency braking, e.g., is obviously discontinuous and intensive automation. It cannot be classified under this regime. The resulting absence of visibility of these important functions cannot satisfy " especially in the light of effect they take on traffic safety. Therefore, in order to reach a full picture of vehicle automation, a comprehensive approach is proposed that can map out different characteristics as "Principle of Operation" at top level. On this basis informing and warning functions as well as functions intervening only temporarily in near-accident situations can be described. To reach a complete picture, levels for the discontinuous, temporarily intervening functions are proposed " meant to be the counterpart of the continuous levels already in place. This results in a detailed and independent classification for accident-prone situations. This finally provides for the visibility these important functions deserve.
Test and assessment procedures for passive pedestrian protection based on developments by the European Enhanced Vehicle-safety Committee (EEVC) have been introduced in world-wide regulations and consumer test programmes, with considerable harmonization between these programmes. Nevertheless, latest accident investigations reveal a stagnation of pedestrian fatality numbers on European roads running the risk of not meeting the European Union- goal of halving the number of road fatalities by the year 2020. The branch of external road user safety within the EC-funded research project SENIORS under the HORIZON 2020 framework programme focuses on investigating the benefit of modifications to pedestrian test and assessment procedures and their impactors for vulnerable road users with focus on the elderly. Injury patterns of pedestrians and cyclists derived from the German In-Depth Accident Study (GIDAS) show a trend of AIS 2+ and AIS 3+ injuries getting more relevant for the thorax region in crashes with newer cars (Wisch et al., 2017), while maintaining the relevance for head and lower extremities. Several crash databases from Europe such as GIDAS and the Swedish Traffic Accident Data Acquisition (STRADA) also show that head, thorax and lower extremities are the key affected body regions not only for the average population but in particular for the elderly. Therefore, the SENIORS project is focusing on an improvement of currently available impactors and procedures in terms of biofidelity and injury assessment ability towards a better protection of the affected body regions, incorporating previous results from FP 6 project APROSYS and subsequent studies carried out by BASt. The paper describes the overall methodology to develop revised FE impactor models. Matched human body model and impactor simulations against generic test rigs provide transfer functions that will be used for the derivation of impactor criteria from human injury risk functions for the affected body regions. In a later step, the refined impactors will be validated by simulations against actual vehicle front-ends. Prototyping and adaptation of test and assessment procedures as well as an impact assessment will conclude the work of the project at the final stage. The work will contribute to an improved protection of vulnerable road users focusing on the elderly. The use of advanced human body models to develop applicable assessment criteria for the revised impactors is intended to cope with the paucity of actual biomechanical data focusing on elderly pedestrians. In order to achieve optimized results in the future, the improved test methods need to be implemented within an integrated approach, combining active with passive safety measures. In order to address the developments in road accidents and injury patterns of vulnerable road users, established test and assessment procedures need to be continuously verified and, where needed, to be revised. The demographic change as well as changes in the vehicle fleet, leading to a variation of accident scenarios, injury frequencies and injury patterns of vulnerable road users are addressed by the work provided by the SENIORS project, introducing updated impactors for pedestrian test and assessment procedures.
Supported by field accident data and monitoring results of European Regulation (EC) No. 78/2009, recent plans of the European Commission regarding a way forward to improve passive safety of vulnerable road users include, amongst other things, an extension of the head test area. The inclusion of passive cyclist safety is also being considered by Euro NCAP. Although passenger car to cyclist collisions are often severe and have a significant share within the accident statistics, cyclists are neither considered sufficiently in the legislative nor in the consumer ratings tests. Therefore, a test procedure to assess the protection potential of vehicle fronts in a collision with cyclists has been developed within a current research project. For this purpose, the existing pedestrian head impact test procedures were modified in order to include boundary conditions relevant for cyclists as the second big group of vulnerable road users. Based on an in-depth analysis of passenger car to cyclist accidents in Germany the three most representative accident constellations have been initially defined. The development of the test procedure itself was based on corresponding simulations with representative vehicle and bicycle models. In addition to different cyclist heights, reaching from a 6-year-old child to a 95%-male, also four pedal positions were considered. By reconstruction of a real accident the defined simulation parameters could be validated in advance. The conducted accident kinematics analysis shows for a large portion of the constellations an increased head impact area, which can reach beyond the roof leading edge, as well as high average values for head impact velocity and angle. Based on the simulation data obtained for the different vehicle models, cyclist-specific test parameters for impactor tests have been derived, which have been further examined in the course of head and leg impact tests. In order to study the cyclist accident kinematics under real test conditions, different full scale tests with a Polar-II dummy positioned on a bicycle have been conducted. Overall, the tests showed a good correlation with the simulations and support the defined boundary test conditions. Typical accident scenarios and simulations reveal higher head impact locations, angles and velocities. An extended head impact area with modified test parameters will contribute to an improved protection of vulnerable road users including cyclists. However, due to significantly differing impact kinematics and postures between the lower extremities of pedestrians and cyclists, these injuries cannot be addressed by the means of current test tools such as the flexible pedestrian legform impactor FlexPLI. Based on the findings obtained within the project as well as the existing pedestrian protection requirements a cyclist protection test procedure for use in legislation and consumer test programmes has been developed, whose requirements have been transferred into a corresponding test specification. This specification provides common head test boundary conditions for pedestrians and cyclists, whereby the existing requirements are modified and two parallel test procedures are avoided.
Zu Beginn des Jahres 2016 macht der Anteil der Pkws mit alternativem Antrieb rund 2% des Pkw-Gesamtbestandes aus. Der Bestand an Pkw mit alternativem Antrieb stieg auf rund 712.000 Fahrzeuge im Jahr 2016 (ein Plus von etwa 11% gegenüber 2013). Um die zukünftige Entwicklung von Fahrzeugen mit alternativem Antrieb in Deutschland beurteilen zu können, initiierte die Bundesanstalt für Straßenwesen (BASt) im Auftrag des Bundesministeriums für Verkehr und digitale Infrastruktur (BMVI) schon im Jahr 2010 die Einrichtung einer langfristigen Beobachtung des Fahrzeugmarktes und des Unfallgeschehens von Fahrzeugen mit alternativen Antriebsarten mit dem Ziel, die tatsächliche Umsetzung des technologischen Fortschritts in marktgängige Produkte zu verfolgen, frühzeitig Kenntnis über die Bestandsentwicklung zu erhalten sowie mögliche Fehlentwicklungen " insbesondere mit Blick auf die Verkehrssicherheit " zu identifizieren. Vor allem die Betrachtung des letzten Punktes soll die Möglichkeit schaffen, Vorschläge für eine sinnvolle Steuerung der Entwicklung leisten zu können. Nachfolgend werden in Kapitel 2 die technischen Entwicklungslinien des Marktes für Fahrzeuge mit alternativem Antrieb dargestellt. In den Kapiteln 3 und 4 werden der Bestand sowie das Unfallgeschehen näher betrachtet.
Ziel des Projektes war es zu ermitteln, ob und wenn ja unter welchen Bedingungen Elektrokleinstfahrzeuge im Straßenverkehr sicher betrieben werden können, welche technischen Anforderungen dafür notwendig sind und welches Konfliktpotential zu anderen Verkehrsteilnehmern zu erwarten ist. Stehend gefahrene (d.h. Fahrzeuge ohne Sitz z.B. Tretroller mit Elektrounterstützung) und selbstbalancierende Elektrokleinstfahrzeuge (z.B. dem Segway ähnliche) konnten bis 2016 nach der Rahmenrichtlinie 2002/24/EG (Typgenehmigungsvorschrift für Krafträder/Kategorie L-Fahrzeuge), die nun außer Kraft ist, genehmigt werden. Die dort genannten Anforderungen wurden durch die Elektrokleinstfahrzeuge größtenteils nicht erfüllt. Seit 2016 gilt die neue Typgenehmigungs-Verordnung (EU) 168/2013 für Krafträder. Nach dieser Verordnung kann die Genehmigung solcher Elektrokleinstfahrzeuge national geregelt werden, da die Verordnung diese definitiv vom Anwendungsbereich ausschließt. Um bei diesen Fahrzeugen national über eine Genehmigungsfähigkeit entscheiden zu können, wird zum einen eine Einschätzung zur Verkehrssicherheit solcher Fahrzeuge benötigt. Zum anderen müssen aus fahrdynamischen Versuchen Erkenntnisse gewonnen werden, um diese Fahrzeuge klassifizieren zu können und um jeweils Anforderungen festlegen zu können. Die BASt hat im Rahmen dieses Forschungsprojektes Vorschläge für eine derartige Klassifizierung von bestimmten Elektrokleinstfahrzeugen und für die zu stellenden technischen Anforderungen an diese Fahrzeuge erarbeitet, um diese Fahrzeuge sicher im Straßenverkehr verwenden zu können. In dem Forschungsprojekt wurden Elektrokleinstfahrzeuge in vier Teilstudien untersucht: Betrachtungen zur aktiven und passiven Sicherheit, zum Nutzerverhalten und zur Risikobewertung sowie zur Verkehrsfläche. Dabei wurde aufgezeigt, dass es möglich ist, neue Kategorien mit bestimmten Mindestanforderungen zu bilden. Es wird empfohlen, diese Anforderungen einzuhalten, sollten Elektrokleinstfahrzeuge zukünftig im öffentlichen Verkehr betrieben werden können und dürfen. Seitens der aktiven Sicherheit wurden mithilfe von fahrdynamischen Versuchen und technischen Untersuchungen Anforderungen erarbeitet, die das verkehrssicherheitstechnische Risiko bestmöglich minimieren. Weiterhin wurden Empfehlungen in Bezug auf die passive Sicherheit von Elektrokleinstfahrzeugen ausgesprochen, die ein Sicherheitsniveau gewährleisteten, das ähnlich zu heutigen bestehenden Fahrzeugen ist. Das subjektive Fahrverhalten zeigte, dass Elektrokleinstfahrzeuge grundsätzlich sicher vom Fahrer kontrollierbar sind, solange bestimmte Systemgrenzen eingehalten werden. Hinsichtlich der Aspekte des Nutzerverhaltens wurden Schutzausrüstung und das Kräfteverhältnis zu anderen Verkehrsteilnehmern bewertet. In Abhängigkeit von den vorgeschlagenen Fahrzeugkategorien werden entsprechende Verkehrsflächen für die Benutzung empfohlen, basierend auf der im öffentlichen Verkehr analysierten subjektiven Sicherheit und basierend auf einer Analyse des Konfliktpotenzials gegenüber anderen Verkehrsteilnehmern. Aus allen Ergebnissen des Projektes wurden Empfehlungen für die Nutzung der Verkehrsflächen sowie Anforderungen an die (sicherheits-) technische Ausstattung für die neu vorgeschlagenen Elektrokleinstfahrzeuge- Kategorien abgeleitet, die jeweils an Anforderungen für die bereits existierenden Fahrzeugkategorien "Leichtmofa" bzw. "Mofa" angelehnt sind.
2011 beauftragte das damalige Bundesministerium für Verkehr, Bau und Stadtentwicklung die BASt mit der wissenschaftlichen Begleitung des bundesweiten Feldversuchs mit Lang-Lkw. Lang-Lkw dürfen mit bis zu 25,25 m zwar um 6,50 m länger als nach den geltenden Regelungen ausgeführt sein; ein höheres Gesamtgewicht als die auch heute schon geltenden 40 t bzw. 44 t im Vor- und Nachlauf zum kombinierten Verkehr ist bei Lang-Lkw hingegen nicht zulässig. Der Versuch startete mit Wirkung vom 01.01.2012 und war auf die Dauer von fünf Jahren ausgelegt. Er ist Bestandteil des Aktionsplans Güterverkehr und Logistik des Bundesministeriums für Verkehr und digitale Infrastruktur. Die gesetzliche Grundlage zur Durchführung des Feldversuchs bildet die vom Bundesminister für Verkehr erlassene Verordnung über Ausnahmen von straßenverkehrsrechtlichen Vorschriften für Fahrzeuge und Fahrzeugkombinationen mit Überlänge, kurz LKWÜberlStVAusnV, vom 19.12.2011 sowie deren zugehörige Änderungs-Verordnungen. Eine der Vorgaben betraf zum Beispiel den auf ein geprüftes Streckennetz beschränkten Einsatz der Lang-Lkw, eine andere die Teilnahme an der wissenschaftlichen Begleitung. Der Zweck der wissenschaftlichen Begleitung bestand unter anderem in einer Versachlichung des Themas "Längere Lkw". Ausgehend von den Argumenten gegen längere und schwerere Lkw aus der Vergangenheit wurden auch gegen die im Feldversuch ausschließlich adressierte Vergrößerung der Länge von Interessenvertretern der Bahn, von Umweltverbänden, aber auch Automobilclubs Bedenken geäußert. Die Kritik betrifft prinzipiell und relativ pauschal folgende drei zentrale Punkte: - Die Verkehrssicherheit würde durch größere und/oder schwerere Lkw gefährdet. - Die Infrastruktur würde durch größere und/oder schwerere Lkw derart beansprucht, dass eine Ertüchtigung und/oder Instandsetzung die Allgemeinheit mit enormen Kosten belasten würde. - Durch die zu erwartende Effizienzsteigerung und damit einhergehenden Kostenvorteile im Straßengüterverkehr würden Transporte von der Schiene auf die Straße verlagert und/oder neue Verkehre auf der Straße induziert, sodass schließlich nicht weniger, sondern mehr Straßengüterverkehr stattfinden würde. Auch der Umstand, dass es sich beim Lang-Lkw um ausschließlich längere, nicht aber schwerere Lkw handelt, hat keine grundlegende Veränderung in der Diskussion gebracht. Ziel der Konzeption der wissenschaftlichen Begleitung war es, alle in der Öffentlichkeit diskutierten Hoffnungen in und Bedenken gegen den Einsatz von Lang-Lkw umfassend zu berücksichtigen. Aufbauend auf einer internationalen Literaturstudie und unter Berücksichtigung der rechtlichen Rahmenbedingungen sowie öffentlichen Diskussion wurden diejenigen Aspekte ermittelt und aufgelistet, die als mögliche Chancen und Risiken für einen Einsatz von Lang-Lkw in den verschiedenen Quellen benannt wurden. Diese Liste wurde im Rahmen eines Expertenkolloquiums im Mai 2011 diskutiert und weiterentwickelt. Zur Beantwortung der identifizierten Fragestellungen wurden mehrere Forschungsprojekte initiiert und im Feldversuchs zum Teil von der BASt selbst, überwiegend jedoch von externen Forschungsinstituten bearbeitet. Der zum Ende des Feldversuchs vorgelegte Abschlussbericht der BASt enthält neben den für die Konzeption der Gesamtuntersuchung erforderlichen rechtlichen Grundlagen und vorliegenden Erkenntnissen aus der Literatur die Zusammenfassungen der verschiedenen Forschungsprojekte aus allen Untersuchungsphasen der wissenschaftlichen Begleitung. Zusammenfassend ist zu konstatieren, dass sich bedeutende Probleme im Feldversuch nicht gezeigt haben. Gemessen an der Vielzahl betrachteter Fragestellungen ist die Anzahl der identifizierten potenziellen Herausforderungen gering. Zudem können die identifizierten Herausforderungen bei der derzeit vorhandenen Anzahl an im Feldversuch beteiligten Lang-Lkw und auch noch unter der Annahme von deutlich höheren als im Rahmen der Untersuchungen zu den Verkehrsnachfragewirkungen prognostizierten Anteilen von Lang-Lkw am Güterverkehrsaufkommen als hinnehmbar oder beherrschbar eingestuft werden. Es kann zudem festgehalten werden, dass der Einsatz des Lang-Lkw eine positive Verkehrsnachfragewirkung bezüglich einer Reduktion von gefahrenen Lkw-Kilometern und dementsprechend auch eine Reduktion von Klimagasen und Luftschadstoffen im Versuch gezeigt hat und zukünftig haben kann. Es zeigte sich bislang, dass Verlagerungseffekte von der Bahn beziehungsweise vom Binnenschiff auf den Lang-Lkw vor allem aufgrund der bestehenden Gewichts-, aber auch der tatsächlichen beziehungsweise im Modell angenommenen Streckenbeschränkungen sehr gering und damit vernachlässigbar sind. Wenngleich deutlich wird, dass der Lang-Lkw nur eine mögliche Teillösung zur Eindämmung des Güterverkehrswachstums und den damit einhergehenden Umweltwirkungen darstellt, ist der Einsatz aus betriebswirtschaftlicher und verkehrsnachfrageseitiger Sicht in bestimmten Bereichen und Einsatzfeldern sinnvoll.
Neue Herausforderungen an die Unfallforschung durch Fahrerassistenz und automatisiertes Fahren
(2019)
Unfallrekonstruktion hat die Ableitung von Maßnahmen zur Minimierung der Unfallfolgen ermöglicht, vor allem durch Verbesserungen bei passiven Sicherheitseinrichtungen, aber auch durch die Verbesserung der Rettungskette, beispielsweise eCall. Heute können aktive Sicherheitssysteme die Unfallfolgen bereits vor der eigentlichen Kollision reduzieren oder durch Umfeldwahrnehmung und mittels Eingriff in die Fahrzeugsteuerung gegebenenfalls sogar vollständig verhindern. Funktionen, die aktiv in die Fahrzeugsteuerung eingreifen, lassen sich nach ihrer Wirkweise unterscheiden: zum einen handelt es sich um kontinuierlich automatisierende Funktionen, die meist länger aktiv bleiben (zum Beispiel ACC). Zum anderen um Funktionen, die in kritischen Fahrsituationen temporär in die Fahrzeugsteuerung eingreifen. Aufgezeigt wird, welche Konsequenzen und Risiken in Bezug auf diese Systeme sowie für bestimmte (zum Beispiel kritikale) Fahrsituationen anzunehmen sind. Zur Bewertung von aktiven Reglern, die in kritischen Fahrsituationen eingreifen, sind Unfalldaten nur noch eingeschränkt tauglich. Ähnliches gilt für die Bewertung von Ereignissen/ Zuständen im Rahmen kontinuierlicher Fahrzeugsteuerung, vor allem, wenn diese weiter vorausliegen. Wirkzusammenhänge automatisierter Fahrfunktionen müssen jedoch - gerade für den Mischverkehr mit konventionell gesteuerten Fahrzeugen - identifiziert werden. Dafür wird eine Szenariendatenbank mit relevanten Verkehrssituationen benötigt, in die Daten aus Naturalistic Driving Studies (NDS), aus Fahrversuchen oder Versuchen im Fahrsimulator eingehen können. Die zunehmende Durchdringung der Fahrzeugflotte mit kontinuierlich automatisierten Fahrfunktionen lässt eine Abnahme kritischer Fahrsituationen und eine Reduktion der Zahl der Verkehrsopfer erwarten. Allerdings verbleibt eine Restzahl an systemimmanenten Unfällen, die als unvermeidbar gelten müssen.
Anforderungen, Zielkonflikte
(2019)
Um Sicherheit und Umweltverträglichkeit von Straßen- bzw. Kraftfahrzeugen zu gewährleisten, werden an die Gestaltung der Fahrzeuge technische Anforderungen gestellt. Es gibt Anforderungen durch den Gesetzgeber, die erfüllt werden müssen, um ein Fahrzeug in den Verkehr bringen zu dürfen. Darüber hinaus bestehen herstellerinterne Anforderungen an das Produkt, die über das vom Gesetzgeber geforderte Maß hinausgehen, um den Kundenwünschen und der Firmenphilosophie zu genügen. Und als dritter Punkt stellen auch Verbraucherschutz-Organisationen Kriterien auf, anhand derer sie die Eigenschaften der auf dem Markt befindlichen Fahrzeuge bewerten und die Fahrzeuge eingruppieren, was dann der Kundeninformation dient. Auch diese Anforderungen gehen über die des Gesetzgebers hinaus. Das Setzen der gesetzlichen Mindestanforderungen ist für die Fahrzeugtechnik mittlerweile jedoch nicht mehr einzelnen Staaten überlassen. Vielmehr sind die für die Genehmigung von Fahrzeugtypen einzuhaltenden Bedingungen international harmonisiert: Für die EU sind dies EU-Richtlinien oder EU-Verordnungen, die von der Europäischen Kommission in Brüssel vorgeschlagen werden. Für über die EU hinausgehende Staaten bzw. Regionen sind dies unter anderem Regelungen der UN, erstellt von der UN-Wirtschaftskommission für Europa (UNECE) in Genf.
The term test procedure refers to a method that describes how a system has to be tested to identify and assess specific behavior or properties by experiments. This also includes the specification of required tools, equipment, boundary conditions, and evaluation methods. Test procedures are an essential tool to check whether desired product properties are present, which of course also applies to the development of driver assistance systems. In addition to development and release testing that mainly is performed by the vehicle or system manufacturer, there are tests with the purpose of an independent product testing that are conducted by external test organizations. These tests are needed for vehicle type approval (for admission to a specific market), in the context of applying the standard for functional safety (in both cases mainly executed by technical services (being accredited as certification laboratory)) or for customer information purposes (by a test institute for consumer protection). The focus of this chapter is these "external" test methods. After a taxonomy of test procedures, the differences between legislation (type approval) and consumer testing are highlighted. Typical tests and the associated test setup, tools, and assessment criteria are discussed, and an outlook toward testing in the near and mid-future is given.
The term driver assistance systems in the chapter title shall be understood to include vehicle automation. This chapter starts with a homogeneous and consistent classification and nomenclature of all kinds of driver assistance systems known and under discussion today (including vehicle automation). It thereby builds upon familiar classification schemes by the German Federal Highway Research Institute (BASt) and the standardization body SAE international. Detailed evaluation of the German legal situation for driver assistance systems and vehicle automation is provided in the following Sect. 2. In Sect. 3, an overview is given on the legal system in the US to reveal aspects relevant for vehicle automation. This is intended as initial information for those not acquainted to the US legal system which has been the first to regulate automation in several federal states. Finally, in Sect. 4, the current rating scheme of the European New Car Assessment Programme (EuroNCAP) is presented in comparison to legal instruments. The model of a consumer protection based approach proves to be a flexible instrument with great advantages in promoting new technologies. Technical vehicle regulations on the other hand rule minimum requirements. Both approaches are needed to achieve maximum vehicle safety.
The "Autonomous driving on the roads of the future: Villa Ladenburg Project" by the Daimler und Benz-Stiftung looks at degrees of automation that will only become technically feasible in the distant future. The treatment of the legal questions in the present chapter therefore draws heavily on the description of the use cases, which begin to provide a concrete basis for evaluating individual issues. Uncertainties in predicting future technical developments can be expected and will have a commensurate impact on the assumptions and conclusions of this chapter. The resulting uncertainty is nevertheless unavoidable if one wants to press ahead with important interrelated issues. This chapter is therefore intended as a contribution to the debate on societal aspects of automated driving from a legal perspective and not as a legalistic evaluation of the subject. The consideration will largely focus on the situation within the context of current German law. The legal views expressed are those of the author and are based on nine years of experience in the field of driver assistance system research. In terms of the underlying conception presented here, the societal dimension of autonomous vehicles addressed in the present project goes well beyond the adjustments to the legal framework currently being called for in Germany. The following will examine the question of "societal acceptance" in the context of the legal questions raised by autonomous vehicles. This line of investigation is not immediately obvious and covers only a segment of the more thoroughgoing focus of the project.