80 Unfallforschung
Filtern
Erscheinungsjahr
Dokumenttyp
Schlagworte
- Conference (88)
- Germany (87)
- Konferenz (87)
- Deutschland (86)
- Accident (82)
- Unfall (81)
- Unfallrekonstruktion (49)
- Safety (37)
- Sicherheit (36)
- Injury (35)
Institut
- Sonstige (140) (entfernen)
Das Sicherheitsaudit stellt einen wesentlichen Bestandteil des Sicherheitsmanagements von Straßen in der Planungsphase dar. Ein aktueller systematischer Überblick über die Auditpraxis in den Ländern sowie über die Verbreitung in Kommunen lag jedoch bisher nicht vor. Ziel war es daher, zunächst Wissenslücken bezüglich der tatsächlichen Anwendung und der organisatorischen Verankerung des Sicherheitsaudits zu schließen. Hierfür erfolgten zunächst eine Recherche zur Anwendung von Sicherheitsaudits auf Länder- und kommunaler Ebene sowie eine Erhebung zu durchgeführten Audits. In diesem Zusammenhang erfolgte auch ein Erfahrungsaustausch mit Auditoren von Straßenbauverwaltungen der Länder sowie mit Auditoren von Stadtverwaltungen. Darüber hinaus wurden jeweils 200 Auditberichte zu außer- und innerörtlichen Maßnahmen einschließlich der zugehörigen Stellungnahmen ausgewertet. Darauf aufbauend erfolgte die detaillierte Untersuchung ausgewählter auditierter Maßnahmen, die bereits realisiert und unter Verkehr waren und für die ein Unfallgeschehen von mindestens drei Jahren nach Verkehrsfreigabe vorlag. Während die Gespräche zum Erfahrungsaustausch weitestgehend übereinstimmende Aussagen im Hinblick auf die Auditierung von außer- und innerörtlichen Maßnahmen erbracht haben, haben die Auswertungen der jeweils 200 Audits wie auch die Detailauswertung der Audits von Außerorts- und Innerortsstraßen zu unterschiedlichen Erkenntnissen geführt. Abschließend wurden Empfehlungen zur Weiterentwicklung der Auditpraxis in Deutschland sowie zur Übernahme in die Fortschreibung der ESAS abgeleitet. Der wesentliche Baustein im Zusammenhang mit der Fortschreibung der ESAS war die Erarbeitung von Defizitlisten, die zukünftig in elektronischer Form zur Verfügung stehen sollen und anhand derer ein Audit auf Vollständigkeit überprüft werden kann. Ferner sollen sie für eine Dokumentation und Auswertung der Auditergebnisse genutzt werden können.
Im Bereich von Arbeitsstellen längerer Dauer ist es oft erforderlich, den Verkehr auf die Gegenfahrbahn überzuleiten. Neben vermehrten Verkehrsbehinderungen durch erhöhte Stauanfälligkeiten führt dies auch zu einer deutlich gesteigerten Unfallhäufigkeit. Ziel des Vorhabens war es, eine vergleichende Bewertung von verschiedenen Verkehrsführungen in Arbeitsstellen längerer Dauer mit Überleitung auf die Gegenfahrbahn vorzunehmen. Hierbei sollten die Auswirkungen von Anschlussstellen und andere Besonderheiten innerhalb der Bereiche mit Gegenverkehrstrennung mit betrachtet werden. Des Weiteren sollte die Relevanz der Zulauf- und vor allem der Überleitungsbereiche im Hinblick auf die Verkehrssicherheit in Arbeitsstellen untersucht und die Übertragbarkeit bzw. Vergleichbarkeit der Ergebnisse im Verhältnis zum Bereich der Gegenverkehrstrennung geprüft werden. Im Laufe der Bearbeitung hat sich gezeigt, dass Leitschwellen kaum noch zur Gegenverkehrstrennung in Arbeitsstellen eingesetzt werden, sondern überwiegend transportable Schutzeinrichtungen. Daher lag für das ursprüngliche Ziel " eine statistisch tragfähige Bewertung des Sicherheitspotenzials von Leitschwellen in Arbeitsstellen als Gegenverkehrstrennungsmaßnahme im Vergleich zu transportablen Schutzeinrichtungen " ein zu geringes Datenkollektiv vor. Hinsichtlich der Sicherheitsbewertung lassen sich auf Basis der Ergebnisse u. a. folgende Kernaussagen festhalten: - Arbeitsstellen mit 3+1-Verkehrsführung sind sicherer als Arbeitsstellen mit 4+0- und 4+2 Verkehrsführung, - in Arbeitsstellen mit 3+1-Verkehrsführung werden erheblich weniger Fahrzeuginsassen bei Unfällen mit Personenschaden verletzt oder getötet als in 4+0-Arbeitsstellen, - zudem sind Arbeitsstellen mit einer zulässigen Höchstgeschwindigkeit von 60 km/h geringfügig sicherer als mit einer zulässigen Höchstgeschwindigkeit von 80 km/h. Die Ergebnisse der unterschiedlichen Untersuchungen haben gezeigt, dass ein reiner Vergleich von einzelnen Verkehrsführungen " ohne Berücksichtigung von weiteren Parametern wie die Fahrstreifenbreite oder das Vorhandensein von Anschlussstellen " nicht sonderlich aussagekräftig ist. Bei der Planung von Arbeitsstellen und der volkswirtschaftlichen Bewertung dieser müssen daher neben der Einrichtungsdauer alle relevanten Parameter betrachtet werden.
Bus or heavy vehicle passenger accidents are rare events, compared with car accidents, but sometimes leads to a large number of victims especially in rollover crash scenarios. Two accidents occurred in Portugal in 2007 and 2013 in which 28 people died and more than 50 are injured, shown the importance of the investigation of such accidents. For the investigation of these accidents multidisciplinary teams are constituted with engineers and police officers. All the factors involved are taken into consideration including road design, traffic signs, maintenance and hardware, human factors, and vehicle factors. In this work a methodology to an accurate collection of the data is proposed. From the information collected the accident is reconstructed using the PC-CrashTM software. From this all the contribution factors are determined and recommendations to mitigate these crashes are listed. These two accidents are rollover accidents and the analysis of the injuries and its correlation with the use of retention systems is very important. From the medical data and with the dynamics of the accident determined simulations of the occupants with biomechanical models are carried out in order to evaluate the effect of the retention systems in the injuries. This analysis is based on injury criteria (such as Abbreviated Injury Score (AIS) or Injury Severity Scale (ISS)). With this it is possible to determine if the seat belt was worn or not.
Since its creation in 2011 the Pre-Crash-Matrix (PCM) offers the possibility to observe the pre-crash phase until five seconds before crash for a wide range of accidents. Currently the PCM contains more than 8.000 reconstructed accidents out of the GIDAS (German In-Depth Accident Study) database and is enlarged continuously by more than 1.000 cases per year. Hence, a detailed investigation of active safety systems in real accident situations has been made feasible. The PCM contains all relevant data in database format to simulate the pre-crash phase until the first collision of the accident for a maximum of two participants. This includes the definition of the participants and their characteristics, the dynamic behavior of the participants as time-dependent course for five seconds before crash as well as the geometry of the traffic infrastructure. The digital sketch of the accident and information from GIDAS as well as from supplementary databases represent the main input for the simulation of the pre-crash phase of an accident with the VUFO simulation model VAST (Vufo Accident Simulation Tool). This simulation in turn embodies the foundation of the PCM. The PCM underlies continual improvements and enhancements in consultation with its users. In addition to collisions of cars with other cars, pedestrians, bicycles and motorcycles the PCM now also covers car to object and car to truck collisions. The paper illustrates car to truck collisions as a showcase and explains perspectives for further developments. In 2016 a more detailed definition of the contour of the vehicle was added. Furthermore, the geometrical surroundings of the accident site will be provided in a new structure with a higher level of detail. Thus, a precise classification of road marks and objects is possible to further improve the support of developing and evaluating ADAS. This paper gives an overview about the latest developments of the PCM with its innovations and provides an outlook to upcoming enhancements. Besides potential areas of application for the development of ADAS are shown.
The advent of active safety systems calls for the development of appropriate testing methods. These methods aim to assess the effectivity of active safety systems based on criteria such as their capability to avoid accidents or lower impact speeds and thus mitigate the injury severity. For prospective effectivity studies, simulation becomes an important tool that needs valid models not only to simulate driving dynamics and safety systems, but also to resolve the collision mechanics. This paper presents an impact model which is based on solving momentum conservation equations and uses it in an effectivity study of a generic collision mitigation system in reconstructed real accidents at junctions. The model assumes an infinitely short crash duration and computes output parameters such as post-crash velocities, delta-v, force directions, etc. and is applicable for all impact collision configurations such as oblique, excentric collisions. Requiring only very little computational effort, the model is especially useful for effectivity studies where large numbers of simulations are necessary. Validation of the model is done by comparison with results from the widely used reconstruction software PC-Crash. Vehicles involved in the accidents are virtually equipped with a collision mitigation system for junctions using the software X-RATE, and the simulations (referred to as system simulations) are started sufficiently early before the collision occurred. In order to assess the effectivity, the real accident (referred to as baseline) is compared with the system simulations by computing the reduction of the impact speeds and delta-v.
Causation of traffic accidents with children from the perspective of all involved participants
(2017)
In the year 2014 about 2,800 children between zero and 14 years got injured due to traffic accidents in Austria. More than 50% were taking part in traffic as active road users like cyclists or pedestrians. Within this study 46 real world traffic accidents between vehicles and children as pedestrians were analysed. In 39 cases, car drivers hit the crossing children. In the other cases, the collision opponents were busses, trucks or motorcycles. Most of the children got hit while crossing a road at urban sites. By analysing the traffic accidents from the perspectives of all involved participants, vehicle drivers and injured children, it is possible to identify factors for each participant, which led to the accident and factors that contributed the accident. The main task is to find patterns in the behaviour of crash victims (children and driver) before the collision. One important fact is that in more than 50% of the analysed cases sight obstructions were an important contributing factor for both, the driver and the child. From drivers view situations in which the child moved unexpected into the driven road lane were often found. For the injured child, factors like: no attention to the road traffic or no sufficient traffic observation were found to be relevant. Further it- possible to sensitise children and adults to possible source of critical traffic situations according to the findings of this study.
For more than a decade, ADAC accident researchers have analysed road accidents with severe injuries, recording some 20,000 accidents. An important task in accident research is to determine the causative factors of road accidents. Apart from vehicle engineering and human factors, accident research also focuses on infrastructural and environmental aspects. To find out what accident scenarios are the most common in ADAC accident research and what driver assistance systems can prevent them, our first task was to conduct a detailed accident analysis. Using CarMaker, we performed a realistic simulation of accident scenarios, including crashes, with varying parameters. To begin with, we made an initial selection of driver assistance systems in order to determine those with the greatest accident prevention potential. One important finding of this study is that the safety potential of the individual driver assistance systems can actually be examined. It also turned out that active safety offers even much more potential for development and innovation than passive safety. At the same time, testing becomes more demanding, too, as new systems keep entering the market, many of them differing in functional details. ADAC will continue to test all driver assistance systems as realistically as possible so as to be able to provide advice to car buyers. Therefore, it will be essential to develop and improve test conditions and criteria.
The proportion of older road users is increasing because of demographic change (in the group 65+ from current 18% to about 24% by 2030). The mobility needs of people 65+ often differ from those of younger people. Seniors (65+) are already more involved in fatal accidents than younger road users. According to the age development, the senior share of road deaths in the EU of today is increasing nearly one-fifth to one-third. From the in-depth analysis of accidents generic simulation models were developed. Attention has been paid both to psycho-physical characteristics as well as on the social and physical environment and their specifics in conjunction with seniors. By simulating the defined scenarios and varying the defined relevant parameters, accident influencing factors were examined as a basis for avoidance. In addition, the parameters were varied to show the influence from the vehicle, the pedestrian and the infrastructure to avoid the accident or to characterize the conditions for which the accident is inevitable.
Twenty-eight percent of traffic accidents in Japan are rear-end collisions, and of these, 13% are multiple collisions (three or more vehicles and/or roadside objects). A post-crash braking system enables the driver to stop the vehicle in a short distance after a rear-end collision to prevent secondary collisions. In this study, the effectiveness of a post-crash braking system was examined using a drive recorder database. In 64% of rear-end collisions, the driver's braking was interrupted after the collision. The stopping distance was estimated with time data from the drive recorder. We predict that the brake assist would be effective in preventing secondary collisions in 21% of cases.
In this study, the mean profile depth (MPD) that expresses roughness of road pavements was calculated using the road survey equipment vehicle and the calculated MPD was compared with the real number of traffic accidents. The analysis method used in this study was to classify the appropriate clustering in relation to traffic accidents using the K-means clustering and to compare this with the presence of traffic accidents via the MPDs to derive the result. K-means clustering was used in the analysis method and four clusters were found using the clustering analysis results. The center of each cluster was 0.627, 0.850, 1.118, and 1.237, respectively. The result of this study is expected to be utilized as foundational research in the traffic safety area.
Powered Two Wheeler (Motorcycle) crashes are overrepresented in EU, England, and United States casualty statistics for both fatal and serious injuries. While regional geographic differences are evident for motorcycle size, type, and engine displacement, the casualty statistics consistently indicate significantly higher injury rates for all motorcycle riders when compared to car occupants. Accident analysis and reconstruction of these motorcycle crashes is a necessary process to gain further understanding of potential injury mitigation strategies. This paper focuses on the analysis of the rider post impact trajectory in the immediate moments following a crash. The rider and motorcycle, while loosely coupled by seating position leading up to a crash, quickly decouple as the crash forces develop. As a result, the rider moves relative to the motorcycle and relative to the collision partner. This movement, or trajectory, is primarily influenced by the type and configuration of the impact, the type and configuration of the motorcycle and collision partner, and the speeds involved. Understanding the rider's post impact trajectory will assist in the development of injury mitigation strategies. Both the free flight trajectory of the rider and the rider's trajectory as influenced by interaction with the motorcycle and collision partner are examined. Rider trajectories in full scale crash testing and real world motorcycle crashes are both studied and presented. The resulting physical evidence that can be observed by an accident analyst is discussed. The application of projectile motion physics is analyzed and the necessary input parameters, such as initial launch angle, are studied. This study will assist in understanding the post-impact dynamics of a motorcyclist, and will provide useful information to analysts evaluating real world crashes.
Car occupants have a high level of mortality in road accidents, since passenger cars are the prevalent mode of transport. In 2013, car occupant fatalities accounted for 45% of all road accident fatalities in the EU. The objective of this research is the analysis of basic road safety parameters related to car occupants in the European countries over a period of 10 years (2004-2013), through the exploitation of the EU CARE database with disaggregate data on road accidents. Data from the EU Injury Database for the period 2005 - 2008 are used to identify injury patterns, and additional insight into accident causation for car occupants is offered through the use of in-depth accident data from the EC SafetyNet project Accident Causation System (SNACS). The results of the analysis allow for a better understanding of the car occupants' safety situation in Europe, thus providing useful support to decision makers working for the improvement of road safety level in Europe.
When assessing the consequences of accidents normally the injury severity and the damage costs are considered. The injury severity is either expressed within the police categories (slight injury, severe injury or fatal injury) or the AIS code that rates the fatality risk of a given injury. Both injury metrics are assessing the consequences of the accident directly after the accident. However, not all consequences of accidents are visible directly after the accident and the duration of the consequences are different. Besides a physiological reduction of functionality social and psychological implications such as reduced mobility options, problems to continue the original job etc. are happening. In order to assess long term consequences of accidents the MHH Accident Research Unit established a brief questionnaire that is distributed to accident involved people of the Hannover subset of the GIDAS data set approx. one year after the accident beginning with the accident year 2013. The basic idea of using a brief questionnaire (in fact only one page) is to obtain a relatively large return rate because the questionnaire appears to be simple and quickly answered. This appears to be important because it is believed that the majority of accident involved people will not report long term consequences. In order to allow a more detailed survey amongst those responders that are reporting long term consequences they are asked for a written consent for the additional questionnaire that will be distributed at a time that is not yet defined. Long term consequences are reported for all addressed areas, medical, physiological, psychological and sociological by people without injuries, with minor injuries and with severe injuries.
Whiplash injuries are characterized by the high variability of its symptoms and by the subjectivity of its diagnosis, which sometimes leads to frauds perpetrated by victims of rear-end impacts. It is estimated that whiplash injuries cost annually about 10.000 million Euros in Europe. Therefore, the aim of this study was to investigate the influence of the dynamics of the accident in which the victim was involved in the probability of development of whiplash associated injuries. In the presented methodology, first an accident reconstruction is performed where the dynamics of the accident is determined. This is carried out using the software PC-Crash, police and insurance companies' data. Then biomechanical injuries criteria related with whiplash injuries are evaluated. For the evaluation of the probability of having whiplash injuries, the Neck Injury Criterion (NIC) of the victim and the mean acceleration of the vehicle were evaluated. Then, with medical reports, the results of the accident reconstruction are correlated with the reported injuries. Some examples are presented. The results obtained indicate that the study of the dynamics of the road accidents in which the victims were involved could be used as an auxiliary of the prognosis of whiplash injuries and is important for a precise diagnosis of this type of injuries.
Still correlated with high mortality rates in traffic accidents traumatic aortic ruptures were frequently detected in unprotected car occupants in the early years. This biomechanical analysis investigates the different kinds of injury mechanisms leading to traumatic aortic injuries in todays traffic accidents and how the way of traffic participation affects the frequency of those injuries over the years. Based on GIDAS reported traffic accidents from 1973 to 2014 are analyzed. Results show that traumatic aortic injuries are mainly observed in high-speed accidents with high body deceleration and direct load force to the chest. Mostly chest compression is responsible for the load direction to the cardiac vessels. The main observed load vector is from caudal-ventral and from ventral solely, but also force impact from left and right side and in roll-over events with chest compression lead to traumatic aortic injuries. Classically, the injury appeares at the junction between the well-fixed aortic arch and the pars decendens following a kind of a scoop mechanism, a few cases with a hyperflexion mechanism are also described. In our analysis the deceleration effect alone never led to an aortic rupture. Comparing the past 40 years aortic injuries shift from unprotected car occupants to today's unprotected vulnerable road users like pedestrians, cyclists and motorcyclists. Still the accident characteristics are linked with chest compression force under high speed impact, no seatbelt and direct body impact.
To elucidate the risk of pedestrians, bicycle and motorbike users, data of two accident research units from 1999 to 2014 were analysed in regard to demographic data, collision details, preclinical and clinical data using SPSS. 14.295 injured vulnerable road users were included. 92 out of 3610 pedestrians ("P", 2.5%), 90 out of 8307 bicyclists ("B", 1.1%) and 115 out of 4094 motorcycle users ("M", 2.8%) were diagnosed with spinal fractures. Thoracic fractures were most frequent ahead of lumbar and cervical fractures. Car collisions were most frequent mechanism (68, 62 and 36%). MAIS was 3.8, 2.8 and 3.2 for P, B and A with ISS 32, 16 and 23. AIS-head was 2.2, 1.3 and 1.5). Vulnerable road users are at significant risk for spine fractures. These are often associated with severe additional injuries, e.g. the head and a very high overall trauma severity (polytrauma).
While cyclists and pedestrians are known to be at significant risk for severe injuries when exposed to road traffic accidents (RTAs) involving trucks, little is known about RTA injury risk for truck drivers. The objective of this study is to analyze the injury severity in truck drivers following RTAs. Between 1999 and 2008 the Hannover Medical School Accident Research Unit prospectively documented 43,000 RTAs involving 582 trucks. Injury severity including the abbreviated injury scale (AIS) and the maximum abbreviated injury scale (MAIS) were analyzed. Technical parameters (e.g. delta-v, direction of impact), the location of accident, and its dependency on the road type were also taken into consideration. The results show that the safety of truck drivers is assured by their vehicles, the consequence being that the risk of becoming injured is likely to be low. However, the legs especially are at high risk for severe injuries during RTAs. This probability increases in the instance of a collision with another truck. Nevertheless, in RTAs involving trucks and regular passenger vehicles, the other party is in higher risk of injury.
In this study, we compared the injury severity of occupants according to the seating position and the crashing direction in motor vehicle accidents. In the driver's point of view, it was separated the seating position as "Near-side" and "Far-side". The study subjects were targeted by people who visited 4 regional emergency centers following motor vehicle accidents. Real-world investigation was performed by direct and indirect methods after patient- consent. The information of the damaged vehicle was informed by Collision Deformation Classification (CDC) code and the information of the injury of patients was informed by using the Abbreviated Injury Score (AIS) and Injury Severity Score (ISS). When the column 3 in CDC code was P, damaged at the middle part of lateral side, the average point of AIS 3 was 1.91-±1.72 in near-side and 1.02-±1.31 in far-side (p<0.01). The average point of maximum AIS (MAIS) was 2.78-±1.39 in near-side and 2.02-±1.11 in far-side (p<0.01). The average point of ISS was 15.74-±14.71 in near-side and 8.11-±8.39 in far-side (p<0.01). Also, when the column 3 in CDC code was D, damaged at the whole part of lateral side, it was significant that the average point of AIS 3 and MAIS in near-side was bigger than in far-side (p=0.02).
In-depth accident investigation offers many advantages for the analysis and comprehension of crash mechanisms. IFSTTAR makes such investigations since 1992 without interruption. The corresponding database contains more than 1200 accident case studies. Currently, in-depth accident investigation is one of the best ways to determine the speed or cars involved in accidents. This paper first presents the methods used for accident investigation and for accident kinematic reconstruction. Then, in order to illustrate the interest and possible applications of such accident data, it shows some results from a recent study based on the IFSTTAR in-depth accident study programme (IDAS) and dealing with the link between travelling speed and accident risk.
For the avoidance of traffic accidents by means of advanced driver assistance systems the knowledge of failures and deficiencies a few seconds before the crash is of increasing importance. This information e.g. is collected in the German accident survey GIDAS by an interview derived from the ACAS methodology. However to display the whole range of accident causation factors additional information is needed on enduring factors of the system components "human", "infrastructure" and "machine". On the strategic level these accident moderating factors include long term influences such as medical preconditions or a general higher risk taking behavior as well as influences on the immediate conflict level such as an aggressive response to a perceived previous traffic conflict. This study was conducted to examine the feasibility of collecting such causation information in the scope of an in-depth accident investigation like GIDAS. Due to the comprehensive amount of information necessary to estimate the moderating factors the collection of the information is distributed to different methods. 5 cases of real world crashes have been investigated where information was collected on-scene and retrospective by interviews. The identified moderating factors of the accidents and the method for collecting the information are displayed.
Motorcycle crashes in Austria: Analysis of causes and contributing factors based on in-depth data
(2017)
From CEDATU, the in-depth accident database run by the Vehicle Safety Institute at Graz University of Technology, a representative sample of 101 crashes involving at least one motorcycle was selected. The analysis focused on causes for crashes as well as on contributing factors, but also included parameters of road, riders and vehicles. Own riding speed and "unexpectable action by another road user" were the most frequent causes for accidents. Inappropriate safety distance or delayed reaction were frequent, both as causation factors and as contributing factors. Infrastructure issues never cause an accident, but they are very frequent as contributing factors; road geometry and road guidance are by far most frequent among these. This paper also discusses accidents by type and other parameters (e.g. injury severity by body region, collision speed, age and others), and compares accident causes to previous studies as well as the police reported accident statistics.
Recently, EuroNCAP updated the upper legform test protocols. The main objective of this study is to establish the upper legform test in KIDAS (Korean In-depth Accident Study) taking into account domestic pedestrian accident data as well as anthropometric data to protect elderly pedestrians whose average height and weight is much smaller and lighter than other age groups, especially compared to Europeans. Therefore 230 cases of pedestrian accidents from KIDAS were investigated to explore the injury severity of body regions as well as age related injury patterns. Injuries of all body regions were examined, with a special focus on injuries of abdomen and pelvic area. On the other hand, in order to explore Korea's pedestrian accident environment, national police data and KIDAS (Korean In-depth Accident Study) data were compared. The results should be taken into account in future analyses and possible improvements, such as regulations and KNCAP test protocols, of the pedestrian safety policy in Korea.
The Decision Support System (DSS) is one of the key objectives of the European co-funded research project SafetyCube in order to better support evidence-based policy making. Results will be assembled in the form of a DSS that will present for each suggested road safety measure: details of risk factor tackled, measure, best estimate of casualty reduction effectiveness, cost-benefit evaluation and analytic background. The development of the DSS presents a great potential to further support decision making at local, regional, national and international level, aiming to fill in the current gap of comparable measures effectiveness evaluation. In order to provide policy-makers and industry with comprehensive and well-structured information about measures, it is essential that a systems approach is used to ensure the links between risk factors and all relevant safety measures are made fully visible. The DSS is intended to become a major source of information for industry, policy-makers and the wider road safety community.
Millions of kilometers are driven and recorded by car manufacturers and researchers every year to gather information about realistic traffic situations. The focus of these studies is often the recording of critical situations to create test scenarios for the development of new systems before introducing them into the market. This paper shows a novel Analysis and Investigation Method for All Traffic Scenarios (AIMATS) based on real traffic scenes. It also shows how to get detailed information about speeds, trajectories and behavior of all participants without driving thousands of kilometers at the example of conflict situations with animals. Basis of the AIMATS is the identification of the most relevant locations as "Points of Interest" (POI), the recording of the critical situations and their "base lines" at these POI. This paper presents a new method to identify critical scenarios involving both vehicles and animals as well as preliminary results of a study done in Saxony using this new method.
Although road infrastructure is developed extensively Brazil is still one of the countries with the most dangerous roads in the world. In order to stop the increasing trend of traffic fatalities of the last few years and to improve traffic safety on Brazilian roads a pilot study on behalf of SAE Brazil started in March 2016 with the goal to lay the foundations for a long-term research activity. Piloting for an in-depth accident investigation the city of Campinas, roughly 100 km north of São Paulo was chosen. The pilot project was carried out with the local partner, the Empresa Municipal de Desenvolvimento de Campinas (EMDEC). The paper reports on the initial training of evidence based accident data collection on-spot, the implementation of the new digital database, the data collection and the first results. An outlook on the planned long-term accident investigations is given.
This paper gives an overview of the in-depth crash investigation activity conducted by the Centre for Automotive Safety Research (CASR) at the University of Adelaide, in South Australia. Recent changes in method include: an expansion in on-call hours for the crash investigation team, providing the option of a phone interview for crash participants to discuss the crash, and downloading objective crash data from vehicle airbag control modules. These changes have resulted in: increased representativeness of crashes by hour of day; a decrease in the over-representation of fatal crashes in our sample; an increase in the proportion of crashes that involved a pedestrian, bicycle or scooter (moped); an increase in the proportion of crash participants consenting to an interview; and an increase in the objective data available, through airbag control module downloads. Our in-depth crash investigations enabled research into road departures that found barriers were a more feasible solution than clear zones for eliminating serious and fatal injury resulting from run off road crashes.
Interdisciplinary accident research and research projects of AARU Audi Accident Research Unit
(2017)
AARU (Audi Accident Research Unit) is an interdisciplinary research project of the University Hospital Regensburg in cooperation with AUDI AG. Specific objective is to comprehend the respective accident scenario and retrieve generally applicable findings as to technical, medical and psychological processes. In order to prevent traffic accidents and to alleviate vehicle accident consequences, postulates of general traffic safety, human-machine interaction, technical design and function of new vehicles and occupant as well as third party protection shall be inferred from these findings. Specifically, each accident with new Audi, Lamborghini and Ducati vehicles involved is analyzed interdisciplinary, discussed in a case meeting and anonymously documented with more than 2,000 parameters. The database is continually used for solving safety relevant issues. Parallel to accident analysis, research projects are performed in the fields medicine, psychology and engineering in order to gain comprehensive insight and identify potential additional areas of activity of accident research.
Ziel des Forschungsprojektes war die Erarbeitung eines webbasierten Verfahrens für die Verkehrssicherheitsarbeit, welches dem Anwender bei der Bearbeitung von Unfallhäufungen potenziell geeignete Maßnahmen in Abhängigkeit der örtlichen Randbedingungen vorschlägt, deren Sicherheitswirkung abschätzt sowie die Möglichkeit bietet, die Maßnahmenwirkung in einer retroperspektiven Betrachtung zu evaluieren. Dabei stellt das Verfahren eine Weiterentwicklung und Ergänzung des Merkblatts "Auswertung von Straßenverkehrsunfällen, Teil 2: Maßnahmen gegen Unfallhäufungen" (FGSV 2002) dar. Grundgerüst der Maßnahmensammlung bilden neben dem Merkblatt der FGSV (2002) aktuelle Erkenntnisse verschiedener Forschungsarbeiten (SPAHN 2012, GERLACH et al. 2009, MAIER et al. 2010, u. w.) zu Maßnahmen gegen Unfallhäufungen, die einer Prüfung und Kategorisierung unterzogen wurden. Der Hauptbestandteil des webbasierten Verfahrens umfasst Schritte zur Unfallanalyse, Maßnahmenfindung und Wirksamkeitsprüfung nach dem "Merkblatt zur örtlichen Unfalluntersuchung in Unfallkommissionen " M UKo" (FGSV 2012). Mit der Übermittlung der Unfallinformationen zu Unfallhäufungen aus den EDV-Systemen der Unfalldatenhaltung in das Programm ist eine spezifische Bearbeitung von Unfallhäufungen möglich. Darüber hinaus wird die Möglichkeit von Rangfolgebildungen zur zielgerichteten Priorisierung von Arbeitsprogrammen angeboten. Die Vorschläge geeigneter Maßnahmen zur Bekämpfung einer Unfallhäufung stuetzen sich im Verfahren auf die Analyse typischer Konfliktsituationen, welche aus den Unfalldatensätzen bestimmt werden. Zur Überprüfung der Angemessenheit und Durchsetzbarkeit von Maßnahmen (-paketen) steht dem Anwender eine Abschätzung des Nutzen-Kosten-Verhältnisses auf Basis des fallbezogenen Unfallgeschehens zur Verfügung. Die kontinuierliche Anwendung des Verfahrens erlaubt dem Nutzer die Dokumentation der Arbeitsschritte. Diese beinhaltet über die Umsetzungskontrolle hinaus wiederum eine fallbezogene Wirksamkeitsprüfung (Evaluierung) der realisierten Maßnahmen. Die stetige Aktualisierung der Maßnahmen und ihrer Kenngrößen (u. a. Wirkungsgrad, Kosten) stellt einen wesentlichen Bestandteil des webbasierten Verfahrens dar, um einen zielorientierten Beitrag zur Bekämpfung von Unfallhäufungen zu leisten.
In the European Project FIMCAR, a proposal for a frontal impact test configuration was developed which included an additional full width deformable barrier (FWDB) test. Motivation for the deformable element was partly to measure structural forces as well as to produce a severe crash pulse different from that in the offset test. The objective of this study was to analyze the safety performance of vehicles in the full width rigid barrier test (FWRB) and in the full width deformable barrier test (FWDB). In total, 12 vehicles were crashed in both configurations. Comparison of these tests to real world accident data was used to identify the crash barrier most representative of real world crashes. For all vehicles, the airbag visible times were later in the FWDB configuration. This was attributed to the attenuation of the initial acceleration peak, observed in FWRB tests, by the addition of the deformable element. These findings were in alignment with airbag triggering times seen in real world crash data. Also, the dummy loadings were slightly worse in FWDB compared to FWRB tests, which is possibly linked to the airbag firing and a more realistic loading of the vehicle crash structures in the FWDB configuration. Evaluations of the lower extremities have shown a general increasing of the tibia index with the crash pulse severity.
Trauma management (TM) covers two types of medical treatment: the initial one provided by Emergency Medical Services (EMS) and a further one provided by permanent medical facilities. There is a consensus in the professional literature that to reduce the severity and the number of road crash victims, the TM system should provide rapid and adequate initial care of injury, combined with sufficient further treatment at a hospital or trauma centre. Recognizing the important role of TM for reducing road crash injury outcome, it was decided, within the EU funded SafetyNet project, to develop road safety performance indicators (SPIs) which would characterize the level of TM systems" performance in European countries and enable country comparisons. The concept of TM SPIs was developed based on a literature study of performance indicators in TM, a survey of available practices in Europe and data availability examinations. A set of TM SPIs was introduced including 14 indicators which characterize five issues such as: availability of EMS stations; availability and composition of EMS medical staff; availability and composition of EMS transportation units; characteristics of the EMS response time, and availability of trauma beds in permanent medical facilities. Basic information on the TM systems was collected in close cooperation with the national expert group. A dataset with TM SPIs for 21 countries was created. It was demonstrated that the countries can be compared using selected TM SPIs. Moreover, a more general comparison of the TM systems' performance in the countries is possible, using multiple ranking and statistical weighting techniques. By both methods, final estimates were received enabling the recognition of groups of countries with similar levels of the TM system's performance. The results of various trials were consistent as to the recognition of countries with high or low level of the TM systems" performance, where in grouping countries with intermediate levels of the TM system's performance some differences were observed. The SafetyNet project's practice demonstrated that data collection for estimating TM SPIs is not an easy task but is realizable for the majority of countries. The TM SPIs" message is currently limited to the availability of trauma care services. Further development of the TM SPIs should focus on characteristics of actual treatment supplied, based on combined police and medical road crash related databases.
Although the annual traffic accident statistics published by the national police is available in public, the detailed traffic accident data has not been released in Korea. Recently the Ministry of Land, Infrastructure and Transport recognized the importance of in-depth accident data to enhance road traffic safety and initiated a research project to establish a collection of the detailed accident data. The main objective of the project is a feasibility study to establish KIDAS (Korea In-Depth Accident Study). Within this project, three university hospitals which are located in mid-size cities have been selected to collect accident data. Annually, more than 500 cases of accidents have been collected from the in-patient's interviews and diagnosis. Unlike GIDAS (German In-Depth Accident Study), currently on-site investigation can"t be performed by the Korean police. The only available data is patient medical records, patient's description of accident circumstances and the damaged vehicle. Occasionally the police provide the accident investigation reports containing very brief information on accident causation and vehicle safety. In a first step, the concept of KIDAS is to adopt the format of iGLAD (Initiative for the Global Harmonization of Accident Data) for harmonization. Since the currently collected accident information is extremely limited compared with GIDAS, the other sources of data and calculations such as KNCAP vehicle data, pc-crash simulations, vehicle registration information, insurance company data are utilized to complete the iGLAD template. Results from KIDAS_iGLAD and the cases of assessment of active safety devices such as AEBS, ESC, and LDWS will be evaluated.
Road accidents are typically analyzed to address influences of human, vehicle, and environmental (primarily infrastructure) factors. A new methodology, based on a "Venn diagram" analysis, gives a broader perspective on the probable factors, and combinations of factors, contributing both to the occurrence of a crash and to sustaining injuries in that crash. The methodology was applied to 214 accidents on the Mumbai-Pune expressway. Factors contributing to accidents and injuries were addressed. The major human factors influencing accidents on this roadway were speeding (30%) and falling asleep (29%), while injuries were primarily due to lack of seat belt use (46%). The leading infrastructure factor for injuries was impact with a roadside manmade structure (28%), and the main vehicle factor for injuries was passenger compartment intrusion (73%). This methodology can help identify effective vehicle and infrastructure-related solutions for preventing accidents and mitigating injuries in India.
Injury severity of e.g. pedestrians or bikers after crashes with cars that are reversing is almost unknown. However, crash victims of these injuries can frequently be seen in emergency departments and account for a large amount of patients every year. The objective of this study is to analyze injury severity of patients that were crashed into by reversing cars. The Hannover Medical School local accident research unit prospectively documented 43,000 road traffic accidents including 234 crashes involving reversing cars. Injury severity including the abbreviated injury scale (AIS) and the maximum abbreviated injury scale (MAIS) was analyzed as well as the location of the accident. As a result 234 accidents were included into this study. Pedestrians were injured in 141 crashes followed by 70 accidents involving bikers. The mean age of all crash victims was 57 -± 23 years. Most injuries took place on straight stretches (n = 81) as well as parking areas (n = 59), entries (n = 36) or crossroads (n = 24). The AIS of the lower extremities was highest followed by the upper extremities. The AIS of the neck was lowest. The mean MAIS was 1.3 -± 0.6. The paper concludes that the lower extremities show the highest risk to become injured during accidents with reversing cars. However, the risk of severe injuries is likely low.
Assessment of the effectiveness of Intersection Assistance Systems at urban and rural accident sites
(2015)
An Intersection Collision Avoidance System is a promising safety system for accident avoidance or injury mitigation at junctions. However, there is still a lack of evidence of the effectiveness, due to the missing real accident data concerning Advanced Driver Assistance Systems. The objective of this study is the assessment of the effectiveness of an Intersection Collision Avoidance System based on real accidents. The method used is called virtual pre-crash simulation. Accidents at junctions were reconstructed by using the numerical simulation software PC-Crashâ„¢. This first simulation is called the baseline simulation. In a second step the vehicles of these accidents were equipped with an Intersection Collision Avoidance System and simulated again. The second simulation is called the system simulation. In the system simulation two different sensors and four different intervention strategies were used, based on a time-to-collision approach. The effectiveness of Intersection Collision Avoidance System has been evaluated by using an assessment function. On average 9% of the reviewed junction accidents could have been avoided within the system simulations. The other simulation results clearly showed a change in the principal direction of force, delta-v and reduction of the injury severity.
The main focus of the benefit estimation of advanced safety systems with a warning interface by simulation is on the driver. The driver is the only link between the algorithm of the safety system and the vehicle, which makes the setup of a driver model for such simulations very important. This paper describes an approach for the use of a statistical driver model in simulation. It also gives an outlook on further work on this topic. The build-up process of the model suffices with a distribution of reaction times and a distribution of reaction intensities. Both were combined in different scenarios for every driver. Each scenario has then a specific probability to occur. To use the statistical driver model, every accident scene has to be simulated with each driver scenario (combinations of reaction times and intensities). The results of the simulations are then combined regarding the probabilities to occur, which leads to an overall estimated benefit of the specific system. The model works with one or more equipped participants and delivers a range for the benefit of advanced safety systems with warning interfaces.
Event data recorders (EDRs) are a valuable tool for in-depth investigation of traffic accidents. EDRs are installed on the airbag control module (ACM) to record vehicle and occupant information before, during, and after a crash event. This study evaluates EDR characteristics and aims at better understanding EDR performance for the improvement of accident reconstruction with more reliable and accurate information regarding accidents. The analysis is based on six crash tests with corresponding EDR datasets.
The study aimed at estimating the impact of pedelecs (with an assumed higher speed than bicycles) on the traffic accident severity in Germany for different penetration rates. The analysis shows that in many real situations (68%) an electrical support of bicycles has no influence on the sequence of accident events. Taking into account a number of unreported "single bicycle accidents", the adoption of similar traffic behavior and similar age distribution, the authors determined a shift of 400 former slightly to seriously injured cyclists in Germany per year. Overall this would be an increase of approximately 2.3% in case of 10% of pedelec penetration with the pessimistic assumption of 10 km/h speed increase although first natural driving studies predict a much lower average speed increase of pedelecs. The hypothesis verbalized in the initial question whether a higher distribution of pedelecs will result in more severe accidents in Germany is not verified. The study shows that electrical support didn"t result in higher collision speed in general. In many accident situations, the speed of pedelecs has only a minor influence on the accident severity. Further research focusing on a possible change of driver behavior especially in new target groups (elderly people) will be needed.
The Traffic Accident Research Institute at University of Technology Dresden investigates about 1,000 accidents annually in the area around and in Dresden. These datasets have been summarized and evaluated in the GIDAS (German Accident In-Depth Study) project for 13 years. During the project it became apparent that the specific traffic situation of a covert exit of a passenger car and an intersecting two-wheeler involves a high risk potential. This critical situation develops in a large part due to the lack of visibility between the driver and the intersecting bike. In this paper the accident avoidance potential of front camera systems with lateral field of view, which allows the driver to have an indirect sight into the crossing street area will be presented.
In North America, frontal crash tests in both the regulatory environment and consumer-based safety rating schemes have historically been based on full-width and moderate-overlap (40%) vehicle to barrier impacts. The combination of improved seat-belt technologies, notably belt tensioning and load limiting systems, together with advanced airbags, has proven very effective in providing occupant protection in these crash modes. Recently, however, concern has been raised over the contribution of narrower frontal impacts, involving primarily the vehicle corners, to the incidence of fatality and serious injury as a result of the potential for increased occupant compartment intrusion and performance limitations of current restraint systems. Drawing on data documented in the National Automotive Sampling System (NASS)/ Crashworthiness Data System (CDS) for calendar years 1999 to 2012, the present study examines the characteristics of existing and proposed corner crash test configurations, and the nature of real-world collisions that approximate the test environments. In this analysis, particular emphasis is placed on crash pulse information extracted from vehicle-based event data recorders (EDR's).
Analysis of pedestrian leg contacts and distribution of contact points across the vehicle front
(2015)
Determining the risk to pedestrians that are impacted by areas of the front bumper not currently regulated in type-approval testing requires an understanding of the target population and the injury risk posed by the edges of the bumper. National statistics show that approximately 10% of all accident casualties are pedestrians, with 20% to 30% of these pedestrian casualties being killed or seriously injured. However, the contact position across the front of the bumper is not recorded in national statistics and so in-depth accident databases (OTS, UK and GIDAS, Germany) were used to examine injury risk in greater detail. The results showed that some injury types and severities of injuries appear to peak around the bumper edges. Although there are sometimes inconsistencies in the data, generally there is no evidence to suggest that the edges of the bumper are less likely to be contacted or cause injury.
Detailed anthropometric data of pregnant women have been collected and used in the development of a computational model of the pregnant occupant model "Expecting". The model is complete with a finite element uterus and multi-body fetus, which is a novel feature in the models of this kind. The computational pregnant occupant model has been validated and used to simulate a range of impacts. The strains developed in the utero-placental interface are used as the main criteria for fetus safety. Stress distributions due to inertial loading of the fetus on the utero-placental interface play a role on the strain levels. Inclusion of fetus model is shown to significantly affect the strain levels in the utero-placental interface. This series of studies has led to the design of seatbelt features specifically for the pregnant women to enable them use the seatbelt correctly and comfortably.
In general the passive safety capability is much greater in newer versus older cars due to the stiff compartment preventing intrusion in severe collisions. However, the stiffer structure which increases the deceleration can lead to a change in injury patterns. In order to analyse possible injury mechanisms for thoracic and lumbar spine injuries, data from the German Inâ€Depth Accident Study (GIDAS) were used in this study. A twoâ€step approach of statistical and caseâ€byâ€case analysis was applied for this investigation. In total 4,289 collisions were selected involving 8,844 vehicles, 5,765 injured persons and 9,468 coded injuries. Thoracic and lumbar spine injuries such as burst, compression or dislocation fractures as well as soft tissue injuries were found to occur in frontal impacts even without intrusion to the passenger compartment. If a MAIS 2+ injury occurred, in 15% of the cases a thoracic and/or lumbar spine injury is included. Considering AIS 2+ thoracic and lumbar spine, most injuries were fractures and occurred in the lumbar spine area. From the case by case analyses it can be concluded that lumbar spine fractures occur in accidents without the engagement of longitudinals, lateral loading to the occupant and/or very severe accidents with MAIS being much higher than the spine AIS.
Motorradfahrer sind im Straßenverkehr besonders gefährdet, nahezu kein Unfall endet ohne Verletzungen der Motorradaufsassen. Wenn ein Unfall unabwendbar ist (das Unfallgeschehen der Motorräder zeigt seit Jahren stetige Besserungen), verbleibt dem Fahrer als Schutz nur seine eigene Bekleidung. Der im Rahmen diese Projekts angestellte Vergleich verschiedener Feldstudien zeigt, dass hauptsächlich die Extremitäten mit Schwerpunkt bei den Beinen verletzt werden. Ähnlich wie hohe Helmtragequoten zum Rückgang der Kopfverletzungen geführt haben, könnte zweckdienliche Schutzkleidung nahezu vollständig Hautabschürfungen und damit verbunden Wundinfektionen vermeiden. Gleichzeitig werden die Schwellwerte für den Eintritt anderer Verletzungen (zum Beispiel Brüche, Bänderrisse, innere Verletzungen) zu höheren Kollisionsgeschwindigkeiten verschoben. Die im Projektverlauf erarbeiteten Anforderungen an Motorradfahrerschutzkleidung sind so spezifisch und vielfältig, dass sie mit keiner anderen, zum Beispiel berufsspezifischen Kleidung vergleichbar sind. Mit Analysen wurde gezeigt, dass einige Anforderungen nur unter Zielkonflikten mit anderen verwirklichbar sind. Die dadurch nötige Mehrfachfunktion mancher Bauteile führt dazu, dass die Prüfung von Eigenschaften kaum mit den Methoden aus üblichen Normenwerken durchgeführt werden kann. Vor diesem Hintergrund begann die Entwicklung speziell angepasster Versuche. In der Regel bilden sie realistisch die Belastungen bei einem Sturz auf die Fahrbahnoberfläche und in der anschließenden Rutschphase nach. Durch die Verlegung der Versuche in das Labor wird die Reproduzierbarkeit erhöht, die Kosten bleiben vergleichsweise gering. Als wichtigste Prüfkriterien wurden Abriebverhalten, Reibwärmeisolation, Reibbeiwert, Stossdämpfung, Widerstand gegen Stich- und Schnittbeschädigung, Formschluss und Bauteilsteifigkeit erarbeitet. Vorgestellt und bewertet wurden verschiedene bereits existierende Prüfverfahren. Wenn sie ungeeignet schienen oder wenn für ein wichtiges Kriterium kein Verfahren zu finden war, wurden eigene neue Vorschläge gemacht. Unter Abwägung von Prüfaufwand und Aussagekraft der Ergebnisse wurde ein Vorschlag für ein normungsfähiges Prüfverfahren erarbeitet. Im Vorschlag berücksichtigt sind nur bereits existierende oder einfach verwirklichbare Prüfverfahren, die für Motorradfahrerschutzkleidung als geeignet angesehen werden.
Bereits in dem 1. Teil der Untersuchung, der Makroanalyse, in welche alle 92 kreisfreien Städte der Bundesrepublik Deutschland (West) einbezogen wurden, hat sich gezeigt, wie wichtig es ist, Schwerverunglücktenbelastungen und Leichtverletztenbelastungen grundsätzlich getrennt zu untersuchen. Die Städte weisen zum Teil völlig entgegengesetzte Entwicklungen bei beiden Größen auf, und es sind unterschiedliche Einflussgrößen dafür verantwortlich. Der Kfz-Motorisierungsgrad und die Bevölkerungsdichte der jeweiligen kreisfreien Stadt haben in der Makroanalyse zunächst den größten Einfluss auf die Schwerverunglücktenbelastungen. Je höher der Motorisierungsgrad und je dünner der Raum besiedelt ist (je mehr Platz zur "Verkehrsentfaltung" zur Verfügung steht), um so höher ist die Schwerverunglücktenbelastung. Je mehr Haushalte pro Einwohner gezählt werden können, je kleiner also der durchschnittliche Haushalt ist, desto höher liegen die Leichtverletztenbelastungen. Dahinter steckt die Risikogruppe Schüler und Studierende. Die Mikroanalyse, der 2. Teil der Untersuchung, in welcher zehn kreisfreie Städte vertieft analysiert wurden, hat ergeben, dass nur zwei Gruppen von Determinanten einen statistisch gesicherten, zum Teil sogar starken Einfluss auf die Schwerverunglücktenbelastungen haben: Je höher das Radverkehrsaufkommen und je niedriger der Anteil vierarmiger Knoten und die Anzahl Lichtsignalanlagen ist, desto höher ist die Schwerverunglücktenbelastung. Dass zwischen Radverkehrsaufkommen und Schwerverunglücktenbelastung jedoch kein so linearer Zusammenhang vorausgesetzt werden kann, wird im Rahmen eines Exkurses "Radverkehr und Verkehrssicherheit" mit Hilfe einer Modellvorstellung differenziert erläutert. Die Schwerverunglücktenbelastungen bei Kindern werden dagegen vor allem durch möglichst viele Lichtsignalanlagen an Fußgängerüberwegen sowie durch ein möglichst langes, getrennt geführtes Radwegenetz gesenkt. Auf die Leichtverletztenbelastungen haben nur zwei Variablen signifikanten Einfluss: Je höher die Zahl der bewirtschafteten Stellplätze außerhalb des öffentlichen Straßenraumes und je höher die Zahl der Einpendler ist, desto höher ist die Leichtverletztenbelastung. Auf statistisch besonders auffällige Resultate wird in Form von Exkursen detailliert eingegangen.
Zwischen der Situation des Fahrradverkehrs in Großbritannien (GB) und der in der Bundesrepublik Deutschland (D) bestehen große Unterschiede hinsichtlich der Bedeutung des Fahrrades im Verkehrsgeschehen sowie der verkehrlichen und infrastrukturellen Rahmenbedingungen. In beiden Ländern stehen jedoch in dem Bestreben nach einer Förderung des Fahrradverkehrs Fragen der Erhöhung der Verkehrssicherheit im Vordergrund. Aufgabe des Forschungsprojektes war es deshalb, das Unfallgeschehen sowie andere für den Radverkehr sicherheitsrelevante Aspekte in beiden Ländern zu analysieren und vergleichend gegenüberzustellen. Dazu wurden neben einer Auswertung der bereits in beiden Ländern vorliegenden Erkenntnisse in je drei ausgewählten Untersuchungsstädten Unfallanalysen, Verhaltensbeobachtungen und Befragungen von Radfahrern durchgeführt. Die Ergebnisse lassen zusammengefasst erkennen, dass Radfahren in GB sowohl hinsichtlich des Unfallrisikos als auch der Unfallschwere nicht sicherer ist als in D. Die Unfallcharakteristik in beiden Ländern unterscheidet sich jedoch in der Zusammensetzung der Unfallbeteiligten, der örtlichen Verteilung der Unfälle im Straßennetz und insbesondere in den typischen Unfallverläufen. Hier wirken sich die Unterschiede in der verkehrlichen Infrastruktur, zum Beispiel bezüglich der Knotenpunktformen und der Ausstattung mit Radverkehrsanlagen sehr deutlich aus. Generell wird deutlich, dass Radverkehrsanlagen bei unzureichender Qualität keine Garantie für eine geringe Unfallgefährdung darstellen. Dies gilt insbesondere für die in D üblichen straßenbegleitenden Radwege. Um die Sicherheit der Radfahrer zu erhöhen, kommt es deshalb weniger auf das "Wieviel?" als auf das "Wie?" der Radverkehrsanlagen an. Speziell in GB besteht noch erheblicher Nachholbedarf im Hinblick auf eine Förderung des Fahrradverkehrs. Auch wenn mit einer Zunahme des Radverkehrs in der Regel auch eine Zunahme der Radverkehrsunfälle verbunden ist, bedeutet dies nicht, dass es zu einem Anstieg der Zahl aller Verkehrsunfälle kommt. Zudem bekräftigt die Untersuchung den Eindruck, dass mit zunehmendem Radverkehr die Gefährdung des einzelnen Radfahrers abnimmt, da die Kraftfahrer dann offenbar eher mit Radfahrern rechnen.
Teil 1: In der Verkehrssicherheitsforschung können Sicherheitswirkungen zumeist nicht im (Labor)experiment sondern nur durch Feldversuche, die einem Experiment ähnlich anzulegen sind, erfasst werden. In diesem Zusammenhang spricht man von einem Quasi-Experimentellen-Design. Da sich bei solchen Quasi-Experimenten immer die Frage stellt, ob die gemessenen Änderungen maßnahmebedingt sind oder auf andere Einflüsse zurückgeführt werden können, werden verschiedene Gefahrenquellen benannt und mit Beispielen belegt, die die Gültigkeit der Ergebnisse von Wirksamkeitsuntersuchungen beeinträchtigen können. Es werden darüber hinaus eine Reihe wichtiger Quasi-Experimenteller-Designs dargestellt, die Vor- und Nachteile der Designs diskutiert und Hinweise auf mögliche Einsatzfelder gegeben. Um die Qualität der Ergebnisse von Wirksamkeitsuntersuchungen zu verbessern, wird vorgeschlagen, mehrere Erhebungen mittels ein und derselben Untersuchungsanordnung zugleich an mehreren Orten oder an mehreren Untersuchungsgruppen durchzuführen. Es werden mehrere simultane Untersuchungsdesigns vorgestellt und Einsatzbereiche erläutert. Teil 2: Simultane Wirksamkeitsuntersuchungen von Maßnahmen zur Hebung der Verkehrssicherheit erfordern häufig statistische Methoden zur Analyse von Kennzahlen, die auf andere Kennzahlen bezogen sind. Diese bezogenen Kennzahlen bezeichnet man als Risikogrößen. Es werden Methoden vorgestellt und diskutiert, die eingesetzt werden können, wenn entweder die Bezugsgrößen fest oder stochastisch sind.
Es wurden Unfälle, die im Rahmen des Forschungsprojektes "Erhebungen am Unfallort" dokumentiert wurden, hinsichtlich der Häufigkeit und der Charakteristik von Pkw-Mehrfachkollisionen analysiert. Beschrieben wurden bei einer vergleichenden Gegenüberstellung von Einfach- und Mehrfachkollisionen die Besonderheiten, die die Mehrfachkollisionen prägen, und zwar im Vorfeld des Unfallgeschehens wie auch im Unfallgeschehen selbst. Mit allen beobachteten Unterschieden der Merkmalsausprägungen ist eine Steigerung der Ausgangsgeschwindigkeit, also der Geschwindigkeit, die vor dem Unfallgeschehen gefahren wurde, verbunden. Die Entstehungswahrscheinlichkeit von Mehrfachkollisionen steigt mit der Zunahme der Fahrgeschwindigkeiten. Geschlechtsspezifische Unterschiede sind lediglich für die Wahl der Ausgangsgeschwindigkeiten vor dem Unfallereignis von Bedeutung. Keine Rolle spielen Fahrzeugeigenschaften bei der Entstehung von Mehrfachkollisionen. Bei Mehrfachkollisionen wurde häufig beobachtet, dass Pkw seitlich mit Objekten am Straßenrand (Leitplanke, Bäume etc.) zusammenstoßen. Bei Seitenkollisionen treten überdurchschnittlich schwere Fahrzeugdeformationen sowie schwere Verletzungen am Kopf, im Thoraxbereich und an den oberen Extremitäten auf. Die Rekonstruktion von Mehrfachkollisionen wird durch ein oftmals komplexes Spuren- und Deformationsbild erschwert. Hilfreich erweisen sich fotogrammetrische Verfahren wie Stereoaufnahmen und Draufsichtfotografie.
Ziel der beschriebenen Untersuchung ist die Ergründung streckencharakteristischer Merkmale bei lokalen Häufungen überwiegend fahrdynamisch begründeter Unfälle auf einbahnigen Außerortsstraßen sowie die Erarbeitung geeigneter Abhilfemaßnahmen. Es wurden Streckenabschnitte mit Unfallhäufungsstellen in Rheinland-Pfalz, Hessen, Saarland und Baden-Württemberg ausgewählt. Auf 58 Untersuchungsstrecken wurde das Geschwindigkeitsverhalten und die streckencharakteristische Geschwindigkeit durch Geschwindigkeitsprofile mit Hilfe von Messfahrten untersucht. Die Streckencharakteristika wurden nach quantifizierbaren Merkmalen wie Kurvigkeit und Krümmungsradien sowie nach subjektiven Beurteilungskriterien aufgeschlüsselt. Unfallhäufungsbereiche wurden durch Beschreibungsmerkmale gekennzeichnet, die den kombinierten Einfluss der Trassierungselemente, der Ausstattung und des Umfeldes erfassten. Die Versuche, quantitative Zusammenhänge zwischen Unfallkennzahlen und einzelnen streckencharakteristischen Merkmalen herzustellen, misslangen. Als weitaus häufigstes Merkmal innerhalb der Unfallhäufungsbereiche zeigte sich eine lokale Steigerung der Kurvigkeit in einer bereits kurvigen Umgebung. An zweiter Stelle der Häufigkeit steht die Mitwirkung von Querneigungs- und Fahrbahndeckenmängeln. Die Autoren stellen fest, dass die heutigen Richtlinien zur Linienführung von Straßen (RAS-L-1) keine ausreichenden Kriterien enthalten, um die häufigste festgestellte Unfallursache zu vermeiden, die darin zu sehen ist, dass innerhalb kurviger Strecken Einzelkurven mit größerer Richtungsänderung und/oder etwas kleinem Krümmungsradius auftreten. Hieraus wird die Notwendigkeit einer entsprechenden Überarbeitung der Richtlinie abgeleitet.
Aus der Gegenüberstellung der in England und in Deutschland ermittelten Kenngrößen konnten Vermutungen beziehungsweise Tendenzen bezüglich der Verhaltensweisen abgeleitet werden. Die durch die ermittelten Daten fundierten Aussagen lassen sich wie folgt zusammenfassen: - Die deutschen Fahrer nutzen im Mittel kleinere Zeitlücken beziehungsweise Zeitdifferenzen zum Einfahren in den Hauptstrom als die englischen Fahrer, weshalb ein riskanteres Verhalten vermutet werden kann. - Auf deutschen Landstraßen scheint schneller gefahren zu werden als auf englischen Landstraßen. - Die deutschen Fahrer nähern sich im Nebenstrom dem Knoten mit höherer Geschwindigkeit als die englischen Fahrer, was ebenfalls auf eine größere Risikobereitschaft oder sogar größere Aggressivität schließen läßt. Bezüglich des Unfallgeschehens lässt sich daher vermuten, dass in Deutschland durch riskanteres Einfahren in die Hauptstraße die Unfallzahl, und durch höhere Geschwindigkeiten die Unfallschwere erhöht werden. Es lässt sich weiter vermuten, dass die englische Fahrweise, da sich die Fahrer langsamer der Einmündung nähern, defensiver ist, woraus sich günstige Auswirkungen auf das Unfallgeschehen ergeben. In dieser Studie wurden am Beispiel der Einmündung die Probleme solcher Messungen und Vergleiche aufgezeigt und versucht, die Risikoakzeptanz messtechnisch zu quantifizieren; anhand der Ergebnisse konnte dabei generell ein etwas riskanteres Verhalten der deutschen Fahrer festgestellt werden. Die Aussagen beziehen sich dabei natürlich zunächst nur auf die den Messungen zugrundeliegenden Einmündungen. Um allgemeingültige Aussagen zum Verhalten der Verkehrsteilnehmer zu erhalten, bedarf es weiterführender Untersuchungen, in die weitere typische Verkehrssituationen mit entsprechenden Aufgaben für die Verkehrsteilnehmer aufgenommen werden.
Mit Abschluss dieses Forschungsprojekts ist eine Wissensbasis erarbeitet, die es ermöglicht relativ schnell die Eigenschaften beliebiger Schutzhelme im Voraus zu berechnen. Es wurde ein Rechenprogrammsystem erstellt, welches mit Hilfe der Schalentheorie und der Methode der Übertragungsmatrizen für alle denkbaren Aufschlagpunkte ingenieurmäßige Aussagen liefert über die Tauglichkeit eines Helms. Mit diesem Programmsystem wurde eine Parameterstudie anhand von 27 Helmvarianten mit dem Ziel durchgeführt, die Abstimmung von Helmschale und Schutzpolsterung so zu wählen, dass eine optimale Energieumsetzung möglich ist, optimal im Sinne einer Minimierung der aus dem Stoß resultierenden Kopfbeschleunigung. Es erfolgte eine Variation der Parameter Schutzpolsterungsdicke und Helmschalendicke. Die Abhängigkeit der Kopfbeschleunigung von der Aufprallenergie wurde ebenfalls untersucht. Neben Vergleichsrechnungen mit der Methode der finiten Elemente wurden auch gemessene Beschleunigungen zur Absicherung der Ergebnisse herangezogen. Die Parameterstudie mittels Übertragungsmatrizen ist auch mit einer parallel entwickelten PC-Programmversion durchführbar. Unter der Voraussetzung hinreichenden Energieaufnahmevermögens sind für den Polycarbonat-Polystyrol-Helm handelsüblicher Machart eine geringe Helmschalendicke, eine geringe Schutzpolsterungsdichte und eine dicke Schutzpolsterung anzustreben, wobei dieser letzte Einfluss weniger stark ist. Nach Abschluss der laufenden Polystyrol-Werkstoffversuche bleibt zu klären inwieweit die beschriebenen Einflüsse abhängig von der Aufprallenergie sind. Die Berechnungen zeigen, dass eine starke Abhängigkeit der maximalen Kopfbeschleunigung von der Aufprallenergie vorliegt, was vom Regelwerk ECE 22/02 nicht hinreichend berücksichtigt wird. Es ist notwendig in den Helmtests unterschiedliche Aufprallenergien zu realisieren. Der Tauglichkeitsnachweis muss den unfallrelevanten Geschwindigkeitsbereich abdecken. Die Prüfkopfmasse muss erhöht werden. Sie repräsentiert die reduzierte Masse und ist im Grenzfall gleich der Masse des Motorradfahrers. Anzustreben ist ideal plastisches Verhalten der Schutzpolsterung, so dass in Kombination mit einer biegesteifen Helmschale über einen weiten Energiebereich Beschleunigungskonstanz erzielt wird. Ein Schritt in diese Richtung wäre der Einsatz von Wabenstrukturen (honeycomb) zwischen Helmschale und Komfortpolsterung.
Die als Pilotstudie gedachte Untersuchung stellt einen Versuch dar, aus den komplexen Wechselwirkungen zwischen Mensch, Umwelt und Fahrzeug diejenigen Einflussgrößen zu bestimmen, die das Unfallgeschehen wesentlich und langfristig bestimmen, Umfang und Intensität des Einflusses auf betroffene Verkehrsteilnehmergruppen einzugrenzen und Gesamteffekte abzuschätzen. Die Prognosen beziehen sich im Detail auf Verunglückte und Schwerverunglückte nach Straßenart, Unfallfolgen, Lebensalter und Unfallursachen. Als in besonderer Weise besorgniserregend wird die prognostische Entwicklung der Verunglücktenzahlen beim Kraftrad herausgestellt, wobei eine gravierende Reduktion wegen der Kopplung von hoher Geschwindigkeit, Ungeschütztheit und Risikofreudigkeit ohne unpopuläre, einschneidende Maßnahmen als kaum möglich erachtet wird.
Verkehrsgerechte Lage von Haltestellen im Straßenraum unter dem Aspekt der Verkehrssicherheit
(1989)
Im Rahmen des Forschungsprogramms "Innerstädtische Planung als Einflussgröße auf die Verkehrssicherheit" der Bundesanstalt für Straßenwesen befasst sich das Lehr- und Forschungsgebiet Öffentliche Verkehrs- und Transportsysteme der Bergischen Universität - Gesamthochschule Wuppertal seit mehreren Jahren mit der verkehrsgerechten Lage und Anlage von Haltestellen des Öffentlichen Personennahverkehrs. In einer Pilotstudie wurden "Möglichkeiten zur Verbesserung der Sicherheit an Haltestellen im Straßenraum" untersucht, ohne jedoch empirische Erhebungen durchzuführen. In einem Anschlussauftrag sind die "Auswirkungen busbeeinflusster Lichtsignalanlagen auf die Sicherheit im Haltestellenbereich" geklärt worden. In dem jetzt abgeschlossenen Forschungsvorhaben sind unter dem Aspekt der Verkehrssicherheit die Anforderungen an die Lage und Ausstattung von Haltestellen im Straßenraum, insbesondere von Haltestellen mit erhöhtem Schüleraufkommen, erarbeitet worden. Dies geschah in Bezug auf die vier grundsätzlichen Haltestellenformen: Haltestellen in Mittellage mit Haltestelleninsel; Haltestelleninsel in Mittellage ohne Haltestelleninsel; Haltestellen in Seitenlage mit Haltestellenbucht; Haltestellen in Seitenlage ohne Haltestellenbucht. Untersucht wurden die Verhaltensweisen von Kraftfahrern, Fahrern öffentlicher Verkehrsmittel, Radfahrer, Fahrgäste und Passanten. Es zeigt sich, dass in zahlreichen Verkehrssituationen zwischen den verschiedenen Verkehrsteilnehmern Gefahrenpotentiale vorhanden sind. Verschiedene Problembereiche, wie das Erreichen und Verlassen der Wartefläche, die Erkennbarkeit einer Haltestelle, die An- und Abfahrt öffentlicher Verkehrsmittel an Haltestellen und die Gefährdung von Radfahrern im Bereich von haltenden Bussen, treten an allen Haltestellenformen auf und lassen sich auf gleiche Ursachen zurückführen. Teilweise können die Gefahrenpotentiale durch einfache Maßnahmen wie die Verbesserung der Fahrstreifenführung und der Markierung oder durch technische Sicherungsmaßnahmen (Türsignale an Fahrzeugen oder Lichtsignalanlagen) gemindert oder eleminiert werden. Zur Steigerung der Verkehrssicherheit werden teilweise aber auch bauliche Maßnahmen wie Verbesserung der Sichtverhältnisse, Anlage von Haltestellen-Kaps oder Radwegen, Änderung der Fahrstreifenführung oder der gegenseitigen Zuordnung der Teilhaltestellen vorgeschlagen. Haltestellen mit starkem Schüleraufkommen, auf deren Untersuchung ein Schwerpunkt dieser Forschungsarbeit lag, erfordern außer einer großzügigen Bemessung der Wartefläche, zusätzlichen Sitz- und Ablagegelegenheiten und ungefährlichen oder gesicherten Zuwegen keine besonderen Maßnahmen. Am Ende der Arbeit wird eine Check-Liste vorgestellt, mit deren Hilfe eine Bestandsaufnahme der Merkmale vorhandener und geplanter Haltestellen möglich ist. Damit der Planer in der Praxis eine Hilfe erhält, sollte nun die Herausgabe eines Merkblattes zur verkehrsgerechten Lage und Anlage von Haltestellen vorangetrieben werden, wozu die vorliegende Forschungsarbeit als Vorbereitung dienen kann.
Schutz von Kindern im Pkw
(1989)
Die Arbeit umfasst eine ausführliche Literaturrecherche und Verkehrserhebungen zu praktischen Fragen des Schutzes mitfahrender Kinder im Pkw. Es wurden an 633 Fahrzeugen, in denen Kinder-Rückhaltesysteme beziehungsweise Kinder vorhanden waren, Erhebungen durchgeführt. Untersucht wurden im ruhenden Verkehr 148 Fahrzeuge, die erkennbar für eine gesicherte Mitnahme von Kindern ausgestattet waren, nach Art, Position und Zustand der Kinder-Rückhaltesysteme. Bei diesen Fahrzeugen ist der Anteil von Kombis mit 20 - 25 Prozent besonders hoch. Detailergebnisse führen zu der Folgerung, dass für Schulkinder die verfügbaren optimalen Schutzmöglichkeiten nicht genutzt werden. Noch höher fällt jedoch das Sicherheitsdefizit für die Kleinstkinder aus: von 56 Säuglingen war nur eines in einer gurtgesicherten Babywanne untergebracht. Aus den Untersuchungsergebnissen werden Empfehlungen zu verbessertem Schutz von Kindern im Pkw abgeleitet, die die Aufklärung betreffen, den gesetzlichen Minimalschutz, die Biomechanik des Kindes, die Prüfvorschriften für Kinder-Rückhaltesysteme, die kostenfreie, zeitweise Überlassung eines Kinder-Rückhaltesystems nach der Entbindung zur Schaffung einer Bewusstseinsbasis für ein lebenslang anhaltendes Sicherheitsbedürfnis, Komfort der Systeme sowie konstruktive Lösungsvorschläge für die Gestaltung von Pkw-Rücksitzen.
This study aimed at prediction of long bone fractures and assessment of lower extremity injury mechanisms in real world passenger car to pedestrian collision. For this purpose, two pedestrian accident cases with detail recorded lower limb injuries were reconstructed via combining MBS (Multi-body system) and FE (Finite element) methods. The code of PC Crash was used to determine the boundary conditions before collision, and then MBS models were used to reproduce the pedestrian kinematics and injuries during crash. Furthermore, a validated lower limb FE model was chosen to conduct reconstruction of injuries and prediction of long bone fracture via physical parameters of von Mises stress and bending moment. The injury outcomes from simulations were compared with hospital recorded injury data and the same long bone fracture patterns and positions can be observed. Moreover, the calculated long bone fracture tolerance corresponded to the outcome from cadaver tests. The result shows that FE model is capable to reproduce the dynamic injury process and is an effective tool to predict the risk of long bone fractures.
Cycling supports the independence and health of the aging population. However, elderly cyclists have an increased injury risk. The majority of injured cyclists is victim of a single-sided accident, an accident in which there is no other party involved. The aim of the project "Safe and Aware on the bicycle" is to develop guidelines for an advisory system that is useful in preventing single-sided accidents. This system is able to support the elderly cyclist; enabling the cyclist to timely adapt his cycling behaviour and improve cycling safety and comfort. For the development of such advisory system the causes of singles accidents and the wishes of the elderly cyclist must be known. First step to obtain this insight was a literature survey and an GIDAS research. Unfortunately accidentology research with GIDAS did not give the full understanding of the pre-crash situations and (especially the behaviour related) factors leading to the accident. The second step was consultation of elderly cyclist through a questionnaire (n=800), in-depth interviews (n=12) and focus group sessions (n=15). This offered complementary information and a much better understanding of the behavioural aspects. Results concern the behaviour in traffic and identify specific physical (i.e. problems looking backwards over the shoulder) and mental issues. Furthermore, the needs and wishes for support in specific cycling situations were identified. In conclusion; The GIDAS results together with the information obtained contacting the elderly cyclists enabled setting up requirements for an advisory system, which is useful in preventing single-sided accidents.
Im Rahmen einer schriftlichen Befragung konnten von rund 15.000 Schülern der Klassen 6, 8 und 10 aus den vier Landkreisen Ammerland, Holzminden, Northeim und Wesermarsch sowie aus den Städten Celle und Hannover Daten zur Verkehrs- und Unfallbeteiligung dieser Personengruppe erhoben werden. Die Befragung wurde im Schuljahr 1987/88 durchgeführt. Aufgrund des hohen Rücklaufs von 86,2 % aller angeschriebenen Schüler ergibt sich ein Befragungsumfang von 6,9 % aller Schüler der Klassen 6,8 und 10 in Niedersachsen. Die Verteilung der befragten Schüler auf die verschiedenen Schulformen spiegelt die niedersächsische Schullandschaft im Bereich der Sekundarstufe I gut wieder. Hinsichtlich der Unfallbeteiligung der Schüler wurde ermittelt, dass die amtlichen Zahlen über Verkehrsunfälle (der Polizei und der Unfallversicherungsträger) deutlich niedriger liegen als die Zahlen der von den Schülern genannten Unfälle. Ferner ist festzustellen, dass die Polizei in den städtischen Regionen wesentlich häufiger zur Unfallaufnahme hinzugezogen wird, als in den ländlich geprägten Regionen. Bezüglich der Verkehrsbeteiligung der befragten Schüler ist festzuhalten, dass sowohl die Dauer der Verkehrsbeteiligung als noch stärker die Art - das heißt die Verkehrsmittelwahl - durch das Alter, das Geschlecht, die besuchte Schulform und auch durch regionale Faktoren bestimmt werden. Diese Tatsache führte zu dem Ergebnis, dass über die Untersuchungsregionen hinausgehende generelle Aussagen zur Verkehrs- und Unfallbeteiligung kaum zu treffen seien. Effektive Unfallanalysen bedürfen der kleinräumigen Betrachtungsweise.
Die laufenden Erhebungen am Unfallort im Raum Hannover werden seit 1984 nach einem theoretisch fundierten Stichprobenverfahren durchgeführt. Da die Stichprobe nicht "selbstgewichtend" (gleiche Erfassungschancen für alle Unfälle) ist, müssen in die Datenauswertung Gewichtungsfaktoren einbezogen werden. Die Notwendigkeit der Gewichtung resultiert einerseits direkt aus dem Erhebungsdesign und andererseits aus verfahrensbedingten Verzerrungen, durch welche vor allem schwere Unfälle in der Stichprobe überrepräsentiert sind. Es zeigt sich, dass durch eine Anpassung der gemeinsamen Verteilung der Merkmale Unfallschwere, Tageszeit und Ortslage an die entsprechende Verteilung der amtlichen Unfallstatistik für das Erhebungsgebiet eine wesentliche Verzerrungsreduktion und Genauigkeitsverbesserung bei den meisten Variablen erreicht werden kann. Nach dem Konzept der replikativen Stichproben lassen sich auch approximative Konfidenzintervalle für die zu schätzenden statistischen Maßzahlen (zum Beispiel Mittelwerte) berechnen. Dem Problem der Übertragbarkeit der Ergebnisse auf die Bundesrepublik Deutschland insgesamt wird breiter Raum gewidmet. Im Rahmen einer umfangreichen Fallstudie werden die vorgeschlagenen Auswertungs- und Hochrechnungsverfahren an praktischen Beispielen demonstriert.
Zielsetzung des Projektes war die Weiterentwicklung der Unfallfolgenbewertung entsprechend neuerer Ergebnisse vor allem aus der Umwelt- und Gesundheitsökonomie, unter Beachtung objektiver wie subjektiver Bewertungsansätze und mit Schwerpunktsetzung auf Personenschäden. Vorgehensweise: Auswertung der vorliegenden Arbeiten unter inhaltlichen und methodischen Gesichtspunkten. Erarbeitung von Verbesserungsvorschlägen unter theoretischen Aspekten sowie unter Beachtung von Möglichkeiten und Problemen der Datenverfügbarkeit. Zentrale Ergebnisse: Ansatzpunkte, die gängige Unfallfolgenbewertung sowohl in theoretischer als auch in methodischer Hinsicht neu zu überdenken, wurden vor allem in folgenden Bereichen identifiziert: 1. Kosten der medizinischen Behandlung: Bei der Erfassung der Behandlungskosten von Unfallopfern wäre ein Verfahren wünschenswert, das auf vorhandenem Datenmaterial aufbaut und die angefallenen Behandlungskosten differenzierter als die Zweiteilung in Schwer- und Leichtverletzte vornimmt. Hier würden sich zunächst vor allem ICD-basierte Fallpauschalen anbieten. 2. Kosten der Invalidität: Zur Ermittlung der langfristigen Kosten von unfallbedingten Invaliditätsfällen bietet sich die Ermittlung und die Bewertung solcher dauerhafter Unfallfolgen auf der Basis von Funktionsniveaueinschränkungen an. Im Vergleich zum Grad der Minderung der Erwerbsfähigkeit ermöglicht diese Vorgehensweise eine realistische Einteilung der unterschiedlichen Grade langfristiger Beeinträchtigungen. 3. Kosten unfallinduzierter Todesfälle: Als Alternative zur Berechnung der Kosten unfallbedingter Todesfälle mit Hilfe des Ertragswert- beziehungsweise Kostenwertansatzes besteht die Möglichkeit zur Ermittlung eines subjektiven Wertansatzes. Diese, zumindest im deutschsprachigen Raum noch wenig berücksichtigten Verfahren, versuchen auf der Basis von Marktbeobachtungen beziehungsweise Befragungen den Wert eines Menschenlebens zu ermitteln. Verfahren aus der Umweltökonomie haben gezeigt, dass inzwischen verfeinerte Instrumentarien entwickelt wurden, dass auch empirische Untersuchungen im Bereich der Verkehrsunfälle durchgeführt werden sollten.
Ziel der Untersuchung war es, eine Verkehrssicherheitsanalyse für die Nutzer des Öffentlichen Nahverkehrs sowie für die des IV durchzuführen. Die Grundlage für die Verkehrssicherheitsanalyse im Öffentlichen Nahverkehr bildet ein theoretisches Wegemodell, mit dem es möglich ist, alle ÖV-Wege umfassend zu beschreiben. Wege werden dabei als Teil eines Gesamtweges betrachtet, bei dem darüber hinaus auch die Zugangs- und Abgangswege zu berücksichtigen sind. Auf dieser Grundlage werden Wegetypen gebildet, die durch eine charakteristische Verkehrsmittelfolge beschrieben werden. Die Sicherheitsanalyse wurde auf der Grundlage mehrerer Erhebungen durchgeführt. Es wurde eine Stichprobenerhebung zur KONTIV-82 ausgewertet, die einen Querschnittt aller ÖV-Wege im Gebiet der Bundesrepublik Deutschland repräsentiert. Die Wegekollektive städtischer Bereich, ländlicher Bereich und Berufsverkehr wurde unterschieden. Außerdem wurden in vier Testgebieten eigene Erhebungen durchgeführt, wobei zwei städtische und zwei ländliche Gebiete ausgewählt wurden. Für diese Wegekollektive wurde eine ausführliche Wegeanalyse durchgeführt. Zur Beschreibung der Wegetypen wurden als Merkmale die Typenhäufigkeit, die Umsteigehäufigkeit, die Benutzungshäufigkeit verschiedener Zu- und Abgangsverkehrsmittel und der ÖV-Mittel sowie die verkehrsmittelspezifischen Wegelängen ausgewertet. Eine weitere Grundlage für die Sicherheitsanalyse bilden die verkehrsmittelspezifischen Unfallraten, die für die Zu- und Abgangswege und für die ÖV-Teilwege anzusetzen sind. Die Unfallraten für Öffentliche Verkehrsmittel wurden auf der Basis verschiedener Statistiken abgeschätzt. Zur Abschätzung der Unfallraten der Zu- und Abgangswege wurden bereits vorhandene Untersuchungen berücksichtigt. Bei der abschließenden Sicherheitsanalyse wurden die Ergebnisse der Wegeanalyse und der Unfalluntersuchung miteinander verknüpft. Dabei wurden für die Wegekollektive mittlere Unfallraten der Zu- und Abgangswege, der ÖV-Teilwege und der Gesamtwege ermittelt. Deutliche Unterschiede zwischen den verschiedenen Wegekollektiven wurden bei der Betrachtung der ÖV-Teilwege und der Gesamtwege festgestellt, was auf die unterschiedlichen verkehrsmittelspezifischen Unfallraten zurückzuführen ist. Das Unfallrisiko auf Zu- und Abgangswegen ist deutlich höher im Vergleich zu den ÖV-Teilwegen. Im Rahmen einer ergänzenden Untersuchung wurde eine analoge Betrachtung des IV auf Basis der KONTIV-82 sowie ein Sicherheitsvergleich IV-OEV durchgeführt, wobei festgestellt wurde, dass die Benutzung öffentlicher Verkehrsmittel in jedem Fall sicherer ist.
Das Ziel des Forschungsprojekts "Quantifizierung der Passiven Sicherheit für Pkw-Insassen" besteht darin, Messergebnisse in Form von Dummybelastungswerten zu einem Sicherheitsindex zu verdichten. Zur Formulierung des dazu erforderlichen Bewertungsalgorithmus wurden folgende Zusammenhänge erarbeitet: 1. Beziehung zwischen Verletzungsschwere und Dummybelastungsgröße für relevante Körperteile, 2. Relevanzfaktoren zur Wichtung der Teilergebnisse und 3. Zusammenhang zwischen körperteilspezifischen Schutzkriterien und dem entsprechenden Erfüllungsgrad. Die wesentliche Aufmerksamkeit erforderte die Bereitstellung der Relevanzstruktur, da mit den einzelnen Relevanzfaktoren die gemessenen Belastungen entsprechend der Bedeutung der im realen Unfallgeschehen beobachteten Verletzungen bewertet werden sollten. Im Bereich der experimentellen Simulation lag das Hauptaugenmerk auf der Bereitstellung der Versuchsbedingungen, wobei die gesetzlich vorgeschriebenen Sicherheitsversuche zu berücksichtigen waren. Daraus ergab sich die Festlegung auf folgende Versuchskonstellationen: 1. Frontaler Wandaufprall, 2. Seitenaufprall einer fahrbaren Barriere auf den stehenden Pkw und 3. Kompatibilitätsversuch, bei dem ein Fahrzeug seitlich mit einem anderen Fahrzeug gleichen Typs kollidiert. Mit Hilfe eines erarbeiteten Bewertungsalgorithmus werden die versuchstechnisch gemessenen Belastungswerte normiert und der Bewertungsfunktion zugeführt. Die so ermittelten Erfüllungsgrade erhalten durch die Relevanzfaktoren eine unfallspezifische Wichtung und lassen sich über Teilsicherheitsindizes zu einem Gesamt-Sicherheitsindex zusammenfassen. Dieser Sicherheitsindex soll Aufschluss über das Niveau der inneren Sicherheit von Pkw geben.
Ziel dieses Forschungsprojektes war es, die Situation im Radverkehr und die Gruppe Radfahrer unter der Fragestellung "Wie sicher ist die Fahrradnutzung" besser kennenzulernen. Hintergrund war die steigende Beteiligung von Radfahrern an Unfällen. Dazu wurden in einem Großstadt-Kernbereich, in einem Großstadt-Randbereich und in einer Mittelstadt radfahrende Schüler, Erwachsene und Ältere bei mehreren Alltagsfahrten begleitet (Fahrprobe Radfahrer). Ihr Verhalten wurde anhand eines Erfassungsschemas interpunktiert und unter Sicherheitsgesichtspunkten bewertet. Es ergab sich ein differenziertes Anforderungsprofil Radverkehr. Später gaben dieselben Radfahrer in einem freien Gespräch (Biographie Radfahrer) Einblicke in ihre Erfahrungen mit den Vor- und Nachteilen des Radfahrens, in ihr Sicherheits- und Unrechtsempfinden. Die Interviews wurden mit einem textanalytischen Codiersystem (TACOS) verschlüsselt und konnten damit quantitativ ausgewertet werden. Die Ergebnisse der Beobachtung und der Befragung wurden je Person zusammengespielt und unter den Fragestellungen Abhängigkeiten der sicheren Fahrradnutzung mit varianzanalytischen Methoden ausgewertet. Radfahrertypen wurden mit Hilfe einer Clusteranalyse identifiziert. Eine Kausalanalyse führte zu einem Erklärungsmodell "Sichere Fahrradnutzung". Nach einer Auswertung der selbst erlebten Verkehrsunfälle mit dem Fahrrad werden Vorschläge für neue Sicherheitsstrategien im Radverkehr gemacht.
Ziel des Forschungsprojekts ist es, vorliegende Verkehrsraumkategorien, insbesondere das 4-Kategoriensystem (Arnold, Hohenadel, 1983), zu prüfen und weiterzuentwickeln, vor allem ist zu prüfen, inwieweit diese Kategorien, die weitgehend auf Plausibiltätsüberlegungen hinsichtlich der Gefährdungswahrscheinlichkeit von Kindern im Alter von 3-14 Jahren in verschiedenen Verkehrsräumen beruhen, Verkehrs- und Gefährdungsverhältnisse adäquat widerspiegeln. Grundlage der Untersuchung ist - eine Literaturanalyse und - eine Unfallerhebung von Kinderunfällen in Hannover. Die Literaturanalyse konzentriert sich auf - die Darstellung vorliegender Ansätze und - die Identifizierung von Kenngrößen zur Verkehrsraumkategorisierung. Die Ergebnisse der Unfallauswertung liefern zusätzlich Anhaltspunkte und Kriterien zur qualitativen Überprüfung der Verkehrsraumkategorien. Die Untersuchung kommt zu dem Ergebnis, dass es sinnvoll ist, ein zweistufiges Kategoriensystem einzuführen, das sich an den Zielgruppen des Verkehrsraum-Konzepts orientiert: - den Laien (Eltern, Lehrer, Erzieher, Kinder); - den Fachleuten (Verkehrssicherheitsbeauftragte, Moderatoren, Polizei). Auf der 1. Stufe (Zielgruppe: Laien) werden nur zwei Grobkategorien (1/2 und 3/4) unterschieden. Diese Kategorien sind für Laien klar voneinander unterscheidbar. Auf der 2. Stufe werden diese Verkehrsraumkategorien anhand zusätzlicher Kenngrößen (Alter des Kindes, siedlungsstrukturelles Umfeld, Variabilität der Verkehrsstruktur) weiter differenziert (Zielgruppe: Fachleute). Abschließend werden Anregungen für die Verkehrssicherheitsarbeit gegeben.
Since a number of human models have been developed it appears sensible to use these models also in the accident analysis. Especially the understanding of injury mechanisms and probably even injury risk curves can be significantly improved when interesting accidents are reconstructed using human body models. However, an important limitation for utilising human models for accident reconstruction is the effort needed to develop detailed FE models of the accident partners or to prepare the human model reconstruction by running physical accident reconstructions. The proposed approach for using human models for accident reconstruction is to use simplified and parametric car models. These models can be adapted to the crash opponents in a fast and cost effective way. Although, accuracy is less compared to detailed FE models, the relevant change in velocity can be simulated well, indicating that the computation of a detailed crash pulse is not needed. Two frontal impact test accidents that were reconstructed experimentally and using the parametric car models are indicating sufficient correlation of the adapted parametric car models with the full scale crash reconstructions. However, further developments of the parametric models to be capable for the use in lateral impacts and rear impacts are needed. For the PC Crash simulation runs the output sampling rate is too large to allow sufficient analysis. In addition the performance appears to be too general.
This study aimed at comparing head Wrap Around Distance (WAD) of Vulnerable Road User (VRU) obtained from the German in-depth Accident Database (GIDAS), the China in-depth Accident Database (CIDAS) and the Japanese in-depth Accident Database (ITARDA micro). Cumulative distribution of WAD of pedestrian and cyclist were obtained for each database (AIS2+) showing that WAD of cyclists were larger than the ones of pedestrians. Comparing three regions, the 50%tile WAD of GIDAS was larger than that of both Asian accident databases. Using linear regression that might predict WAD of pedestrians and cyclists from Impact speed and VRU height, WADs were calculated to be 206cm/219cm (Pedestrian/Cyclist) for GIDAS, 170cm/192cm for CIDAS and 211cm/235cm for ITARDA. In addition, this study may be helpful for reconsideration of WAD measurement alignment between accident reconstruction and test procedures.
Pedestrians represent about 20% of the overall fatalities in Europe- road traffic accidents. In this paper a methodology is proposed to understand why the numbers are so high, especially in the south of Europe and particularly in Portugal, . First a detailed statistical analysis using Ordinal Logistic Regression model (OLR) was applied to the gathered data from all Portuguese accidents with victims in the period 2010-2012. In a second stage accident reconstruction computational techniques using pedestrian biomechanical models are used to evaluate the accident conditions that lead to the injuries, such as the speed and the impact location. For biomechanical injury criterions, the AIS (Abbreviated Injury Scale), the HIC (Head Injury Criterion) and other injury criterions based on the resulting accelerations in the pedestrian's body are used. The statistical model reported that there were several predictors that significantly influenced the pedestrian injury severity in the event of a road accident, such as Pedestrian's age, Pedestrian's gender, Vehicle Design/Category or Driver's gender. The use of injury scales and biomechanical criterions in in-depth investigation of road accidents, such as AIS, can significantly improve the quality of the reconstruction process.
Today's volumes of traffic require more and more responsibility from each individual road user in their interactions. Those who drive motor vehicles have the singular obligation to minimise the risk of accidents and hence the severity of injuries, particularly with a view to the most vulnerable road users such as motor bikes, bikes and pedestrians. Since responsible and pro-active driving depends first and foremost on the visual information relayed by our eyes and the visual channel this requires good command of the traffic and all-round visibility from our driver's seat. Granted that human error can never be fully excluded, improving visibility around the car is nevertheless an urgent priority. To do so, we need to rate visibility in the most realistic driving situations. Since the existing visibility metrics and methodology are not applicable to real-life driving situations, this study aimed at developing a new visibility rating methodology based on real-life accident scenarios. On the basis of the cases documented by the accident research project, this study analysed criteria indicative of diminishing visibility on the one hand and revealing some peculiarities in connection with the visibility issue on the other. Based on the above, the project set out to develop a rating methodology allowing to assess all-round visibility in various road situations taking into account both driver and road geometries. In this context, the assessment of visibility while turning a corner, crossing an intersection and joining traffic on a major road (priority through route) is of major importance. The first tests have shown that critical situations can be avoided by adapting the relevant geometries and technical solutions and that significant improvements of road safety can be derived therefrom.
For the estimation of the benefit and effect of innovative Driver Assistance Systems (DAS) on the collision positions and by association on the accident severity, together with the economic benefit, it becomes necessary to simulate and evaluate a variety of virtual accidents with different start values (e.g. initial speed). Taken into account the effort necessary for a manual reconstruction, only an automated crash computation can be considered for this task. This paper explains the development of an automated crash computation based on GIDAS. The focus will be on the design of the virtual vehicle models, the method of the crash computation as well as exemplary applications of the automated crash computation. For the first time an automated crash computation of passenger car accidents has been realized. Using the automated crash computation different tasks within the field of vehicle safety can be elaborated. This includes, for example, the calculation of specific accident parameters (such as EES or delta-V) for various accident constellations and the estimation of the economic benefit of DAS using IRFs (Injury Risk Functions).
The project UR:BAN "Cognitive assistance (KA)" aims at developing future assistance systems providing improved performance in complex city traffic. New state-of-the-art panoramic sensor technologies now allow comprehensive monitoring and evaluation of the vehicle environment. In order to improve protection of vulnerable road users such as pedestrians and cyclists, a particular objective of UR:BAN is the evaluation and prediction of their behaviour and actions. The objective of subproject "WER" is development support by providing quantitative estimates of traffic collisions at the very start and predict potential in terms of optimized accident avoidance and reduction of injury severity. For this purpose an integrated computer simulation toolkit is being devised based on real world accidents (GIDAS as well as video documented accidents), allowing the prediction of potential effectiveness and future benefit of assistance systems in this accident scenario. Subsequently, this toolkit may be used for optimizing the design of implemented assistance systems for improved effectiveness.
The evaluation of the expected benefit of active safety systems or even ideas of future systems is challenging because this has to be done prospectively. Beside acceptance, the predicted real-world benefit of active safety systems is one of the most important and interesting measures. Therefore, appropriate methods should be used that meet the requirements concerning representativeness, robustness and accuracy. The paper presents the development of a methodology for the assessment of current and future vehicle safety systems. The variety of systems requires several tools and methods and thus, a common tool box was created. This toolbox consists of different levels, regarding different aspects like data sources, scenarios, representativeness, measures like pre-crash-simulations, automated crash computation, single-case-analyses or driving simulator studies. Finally, the benefit of the system(s) is calculated, e.g. by using injury risk functions; giving the number of avoided/mitigated accidents, the reduction of injured or killed persons or the decrease of economic costs.
India is one of the leading countries reporting highest road accidents & related injuries. TMARG (Tata Motors Accident Research Group) has been recording crashes in association with M/s. Lokamanya Medical Foundation since 2011 with M/s, Amandeep Hospitals since Aug 2013. This study has highlighted some accident types not discussed extensively in literature. Trucks to Truck impacts " Cabin interaction with overhanging loadbody structures and Offset underside impacts for passenger vehicles are seen in significant numbers. The paper discusses these in more detail including severity.
Within the COST Action TU1101 the working group WG 1 is dealing with acceptance criteria and problems in helmet use while bicycling concerning conspicuity, thermal stress, ventilation deficits and other potential confounding. To analyze the helmet usage practice of bicyclists in Europe a questionnaire was developed in the scope of working group 1 to collect relevant information by means of a field study. The questionnaire consists of some 66 questions covering the fields of personal data of the cyclist, riding und helmet usage habits, information concerning the helmet model and the sensation of the helmet, as well as information on previous bicycle accidents. A second complementary study is conducted to analyze if the use of a bicycle helmet influences the seating geometry and the posture of cyclists when riding a bicycle and if the if the helmet vertically limits the vision. For this purpose cyclists with and without helmets were photographed in real world situations and relevant geometrical values such as the decline of the torso, the head posture of the upper vertical vision limit due to the helmet were established from the photos. The interim results of the field studies which were conducted in Germany by the Hannover Medical School are presented in this study. Some 227 questionnaires were filled out, of which 67 participants had used a helmet and 42 of the 227 participants have had a bicycle accident before. For the analysis of the riding position and posture of the cyclist over 40 pictures of riders with a helmet and over 240 pictures of riders without a helmet were measured concerning the seating geometry to describe the influence of using a bicycle helmet. Some results in summary: From the riders interviewed with the questionnaire only 11% of the city bike riders and 12% of the mountain bike riders always used the helmet, while 38% of the racing bike riders and 88% of the e-bike-riders always used the helmet. The helmet use seems not to change the sensation of safety of cycling compared to the use of a car. The arguments for not wearing a helmet are mostly stated to be the short distance of a trip, high temperatures or carelessness and waste of time. The reasons for using a helmet are stated to be the feeling of safety and being used to using a helmet. Being a role model for others was also stated to be a reason for helmet use. Concerning the sensation of the helmet 9% of the riders reported problems with the field of vision when using a helmet, 57% saw the problem of sweating too much, and 10% reported headaches or other unpleasant symptoms like pressure on the forehead when using the helmet. The analysis of the seating posture from the pictures taken of cyclists revealed that older cyclists generally have a riding position where the handle bar is higher than the seat (0-° to 10-° incline from seat to handlebar), while younger riders had a higher variance (between -10-° decline and 20-° incline). Further, elderly riders and riders with helmets seem to have a more upright position of the upper body when cycling. The vertical vision limit due to the helmet is determined by the front rim of the helmet (mostly the sun shade). Typical values here range from 0-° (horizontal line from the eye to the sun shade) to 75-° upwards, in which elderly riders tend to have a slightly higher vertical vision limit possibly due to the helmet being worn more towards the face.
Introduction: The method of causation analysis applied under the German accident survey GIDAS, which is based on Accident Causation Analysis System (ACAS) focuses on an on-scene data collection of predominantly directly event-related causation factors which were crucial in the accident emergence as situational resulting events and influences. The paradigm underlying this method refers to the findings of the psychological traffic accident research that most causally relevant features of the system components human, infrastructure and vehicle technology are found directly in the situation shortly before the accident. This justifies the survey method which is conducted directly at the accident (on-scene), shortly after the accident occurrence (in-time) with the detection of human-related causes (in-depth). Human aspects of the situation analysis that interact and influence the risk situations shortly before the collision are reported as errors, lapses, mistakes and failures in ACAS in specific categories and subcategories. Thus methodically ACAS is designed primarily for the collection of accident features on the level of operational action, which certainly leads to valid findings and behavioral causes of accidents. The enhancement by means of Moderating Conditions concerns the pre-crash phase in different levels: strategical, tactical and operational.
While it is important to track trends in the number of road accidents in different countries using national statistics, there is a need for data with more detailed information, so called in-depth accident data. For this reason, several accident data projects emerged worldwide in recent years. However, also different data standards were established and so comparative analysis of international in-depth data has been very hard to conduct, so far. This is why the project iGLAD (Initiative for the Global Harmonization of Accident Data) was established and created the prerequisites for building up a standardized dataset out of the common denominator of different in-depth accident databases from Europe, USA and Asia. In the first phase, the project received funding from ACEA to compile an initial database. To accomplish this, a suitable data scheme has been defined, a pilot study has been conducted as proof of concept and the recoding of the first common data base has been initiated. Also, to prepare the project for its self-supporting continuation in the next years, a business model has been developed. This paper reports the history and status of the project, the current challenges and the creation of a capable consortium to maintain the data. In mid-2014, the initial database containing 1550 cases from 10 different countries will be completed and a first detailed view on this data will be possible.
In der Bundesrepublik ereignen sich jährlich ca. 2 Millionen polizeilich erfasste Straßenverkehrsunfälle. Hiervon sind weniger als 1.000 Unfälle als Großunfälle einzuschätzen. Eine der zentralen Erkenntnisse der Untersuchung besteht darin, dass "Quantensprünge" in der Vermeidung und Bewältigung von Großunfällen erst zu erwarten sind, wenn alle beteiligten Organisationen und Institutionen die anstehenden Aufgaben als organisations- und beteiligtenübergreifendes Managementproblem betrachten und demgemäß handeln. Deshalb stand die Entwicklung des Organisationskonzepts für ein Großunfall-Management Straßenverkehr im Mittelpunkt der Fragestellung. Fallanalysen haben deutlich gezeigt, dass weder Maßnahmen zur Vermeidung noch Strategien zur Bewältigung von Großunfällen räumlich eng begrenzt werden können. Selbst Kreisgrenzen, die beispielsweise im Katastrophenfall von besonderer Bedeutung sind, eignen sich als Bezugsraum nur bedingt. Deshalb empfiehlt sich die "Region", die im politisch-administrativen System der Bundesrepublik begrifflich nicht eindeutig festgelegt ist, als Basiseinheit. Das Großunfall-Management wird in Abhängigkeit von den vorhandenen Risikostrukturen bedarfsgerecht zugeschnitten. Besonderer Wert wurde des weiteren auf eine angemessene Definition und Typisierung von Großunfällen, auf die empirische Analyse von Großunfällen sowie auf die Bewertung der gesetzlichen Grundlagen der Unfallvermeidung und -bewältigung gelegt. Ein differenzierter Katalog von Maßnahmen für die Vermeidung und Bewältigung von Großunfällen rundet die Untersuchung ab.
Ziel des Forschungsvorhabens war es, durch gezielte Auswertung des Unfallgeschehens den Einfluss von Fahrerverhaltensweisen beziehungsweise -merkmalen und technischen Fahrzeugparametern auf die Unfallhäufigkeit und die Unfallart zu ermitteln. Zunächst wurde eine Auswertung der Literatur und die Beschaffung und Aufbereitung des Datenmaterials vorgenommen. Die Grundlage der Auswertungen bildeten die Unfälle mit Pkw-Beteiligung im Bundesland Nordrhein-Westfalen aus dem Jahre 1980. Die Datensätze waren vom Kraftfahrt-Bundesamt in Flensburg um fahrzeugtechnische Angaben erweitert worden. Zur Relativierung der Unfallzahlen wurden fahrzeugtypenspezifische jährliche Fahrleistungen und Bestände berechnet. Weiterhin wurde das Geschwindigkeitsverhalten im freien Verkehr in Abhängigkeit vom Fahreralter sowie vom Fahrzeugtyp ermittelt. Um die Wechselwirkungen von Fahrer- und Fahrzeugeigenschaften im Unfallgeschehen unabhängig voneinander betrachten zu können, war es notwendig, einen "Normalfahrer" zu definieren. Der "Normalfahrer" wurde anhand von Analysen ausgewählter Unfallsituationen mit dem Ziel beschrieben, mit diesen Fahrern Fahrversuche mit Pkw durchführen zu können, deren Ergebnisse weder durch besonders gute noch durch besonders schlechte, sondern vielmehr durch eine durchschnittliche Eignung des Fahrers zum Führen eines Kraftfahrzeuges geprägt sein sollen. Anhand dieser Fahrversuche sollen Grenzen von Kennwerten, die Fahrzeugeigenschaften und das Fahrverhalten beschreiben, abgeleitet werden, die sich als dem "Normalfahrer" angepasst erweisen. Aufgrund der aufgezeigten Zusammenhänge zwischen dem Fahreralter und der ursächlichen Beteiligung an bestimmten Unfalltypen ist es nunmehr möglich, durchschnittlich gute Fahrer als Probanden auszuwählen, die je nach Art des Versuches entweder zur Gruppe der jüngeren und älteren Fahrer gehören. Nach vorheriger Festlegung eines Anteilswertes von Fahrern, die als "normal" anzusehen sind, können bei gleichzeitiger Berücksichtigung der für jüngere und ältere Fahrer typischen Versagensarten die Altersintervalle bestimmt werden, aus denen die "Normalfahrer" für die Fahrversuche auszuwählen sind.
Ziel der vorliegenden Arbeit war die Untersuchung des Alterungsverhaltens von Schutzhelmen für Kraftfahrer und der Einflüsse der photochemischen Alterung der Außenseite der Helmschale auf die Schutzwirkung des Helms. Für die künstliche Bewitterung wurde ein neues Gerät mit speziellen UV-Leuchtstofflampen nach DIN 53384, Verfahren B aufgebaut, in dem neun komplette Schutzhelme gleichzeitig bestrahlt und beregnet werden können. Für die Untersuchungen wurden Schutzhelme nach der ECE-Regelung 22 mit Helmaußenschalen aus den Kunststoffen PC, PA und UP-GF bewittert, wobei eine maximale natürliche Beanspruchung in vier Jahren Gebrauch simuliert wurde. Nach der künstlichen Bewitterung wurden die Schutzhelme einer Stoßdämpfungsprüfung nach Abschnitt 7.3 der ECE-Regelung 22 unterzogen. Bei den nach ECE-Regelung 22 typgeprüften Schutzhelmen konnte keine Alterung ermittelt werden, die die Schutzwirkung der Helme beeinträchtigt hat. Vergleichsversuche mit älteren Helmen mit Helmschalen aus ABS dagegen haben nach der gleichen künstlichen Bewitterung einen deutlichen Einfluss der Alterung gezeigt.
An approach to the standardization of accident and injury registration systems (STAIRS) in Europe
(1998)
STAIRS is a European Commission funded study whose aim is to produce a set of guidelines for a harmonised, crash injury database. The need to evaluate the effectiveness of the forthcoming European Union front and side impact directives has emphasised the need for real world crash injury data-sets that can be representative of the crash population throughout Europe. STAIRS will provide a methodology to achieve this. The ultimate aim of STAIRS is to produce a set of data collection tools which will aid decision making on vehicle crashworthiness as well as providing a means to evaluate the effectiveness of safety regulations. This paper will disseminate the up-to-date findings of the group as they try to harmonise their methods. The stage has been reached where studies into the diverse methods of the UK, French and German systems of crash injury investigation have been undertaken. An assessment has already been made of the relationships between the three current systems in order to define the areas of agreement and divergence. The conclusions reached stated that there were many areas that are already closely related and that the differences were only at the detailed level. With the emphasis on secondary safety and injury causation, core data sets were decided upon, taking into account: vehicle description, collision configuration, structural response of vehicles, restraint and airbag performance, child restraint performance, Euro NCAP, pedestrian and vehicle occupant kinematics, injury description and causation. Each variable was studied objectively, the important elements isolated and developed into a form that all partners were agreeable on. A glossary of terms is being developed as the project progresses which includes ISO standards and other definitions from the associated CAREPLUS project, which addresses the comparability of national data sets. A major consideration of the group was the data collection method to be employed. The strengths and weaknesses of each study were investigated to obtain a clear idea of which aspects offered the best way forward. The quality of this information and transference into a common format, as well as the necessary error checking systems to be employed have just been completed and are described. In tandem with this area of study the problem of the statistical relationship of each sample to the national population is also being investigated. The study proposes a mechanism to use a sample of crash injury data to represent the national and international crash injury problem
Side-impact safety of passenger cars is assessed in Europe in a full-scale test using a moving barrier. The front of this barrier is deformable and represents the stiffness of an 'average' car. The EU Directive 96/27/EC on side impact protection has adopted the EEVC Side Impact Test Procedure, including the original performance specification for the barrier face when impacting a flat dynamometric rigid wall. The requirements of the deformable barrier face, as laid down in the Directive, are related to geometrical characteristics, deformation characteristics and energy dissipation figures. Due to these limited requirements, many variations are possible in designing a deformable barrier face. As a result, several barrier face designs are in the market. However, research institutes and car manufacturers report significant difference in test results when using these different devices. It appears that the present approval test is not able to distinguish between the different designs that may perform differently when they impact real vehicles. Therefore, EEVC Working Group 13 has developed a number of tests to evaluate the different designs. In these tests the barrier faces are loaded and deformed in a specific and/or more representative way. Barrier faces of different design have been evaluated. In the paper the set-up and the reasoning behind the tests is presented. Results showing specific differences in performance are demonstrated.
FERSI ist eine internationale Gemeinschaft von Forschungsinstituten, die das gemeinsame Interesse an der wissenschaftlichen Forschung zur Verbesserung der Verkehrssicherheit verbindet. Nach über 10-jähriger, erfolgreicher Zusammenarbeit ist FERSI bestrebt, weiterhin einen wichtigen Beitrag der Forschung zur Lösung der Verkehrssicherheitsprobleme in Europa zu gewährleisten. Die Hauptziele von FERSI sind der internationale Erfahrungsaustausch, die Kooperation der Forschungsinstitute, die wissenschaftliche Unterstützung bei der ständigen Verbesserung der Straßenverkehrssicherheit sowie die Entwicklung und Durchführung gemeinsamer europäischer Forschungsprojekte zur Lösung von Straßenverkehrssicherheitsproblemen.
Wegen der wachsenden Verbreitung von Fahrradanhängern zum Kindertransport und der möglichen Unfallgefährdung ist im vorliegenden Forschungsprojekt deren passive Sicherheit untersucht worden. Zudem wurde der Frage nachgegangen, ob der Transport von Kindern im Fahrradanhänger sicherer ist als mit dem Fahrrad mit Kindersitzen. In Absprache mit Herstellern und Vertreibern wurden verschiedene Untersuchungen durchgeführt. Es handelte sich um Anprallversuche (Anfahrversuche), Rollwagenversuche (Schlittenversuche) sowie Kopffreiheitsprüfungen und Fallversuche. Bei den Versuchen waren die Prüfobjekte mit einem oder zwei Dummies besetzt, die mit Messdatenaufnehmern ausgestattet waren. Verschiedene Messdaten, zum Beispiel Kopf- und Brustbeschleunigung, wurden erfasst und ausgewertet. Zusätzlich wurde das Kopfschutzkriterium (HPC) berechnet und bewertet. Entstandene Schäden an den Prüfobjekten wurden aufgenommen und durch Fotos dokumentiert. Die Versuchsabläufe selbst wurden mit Hochgeschwindigkeitskameras aus verschiedenen Positionen aufgezeichnet. Beim Anfahrversuch mit einem Pkw gegen ein Gespann aus Fahrrad und Anhänger waren direkte Anstöße der Anhängerinsassen an die Pkw-Front zu erkennen. Die Beschleunigungswerte waren dabei relativ hoch. Anstöße gegen Anhängerinnenteile waren bei fast allen Versuchen zu beobachten. Teilweise wurden Radaufhängungen und Radnaben beschädigt. Durch die Rollwagenversuche wurden konstruktive Schwächen bei den Sitzen und Rückhaltesystemen festgestellt. Nähte, Befestigungen und Verstellösen wurden zerstört. Es stellte sich heraus, dass die Qualität des Gurtsystems, die Steifigkeit des Anhängeraufbaus, die Sitzposition der Kinder und die vorhandene Kopffreiheit ausschlaggebend für das Verletzungsrisiko der Insassen sind. Bei den Versuchen mit Fahrradsitzen ergaben sich hohe Beschleunigungswerte durch den direkten Kontakt des Radfahrers mit der Fahrzeugfront und/oder der Fahrbahn. Das Gewicht des Radfahrers, des Fahrrades und auch Fahrradteile bergen ein erhöhtes Verletzungsrisiko für das Kind. Zusätzlich besteht die Gefahr überfahren zu werden, wenn das Kind nach dem Sturz des Fahrrades ungeschützt auf der Fahrbahn liegt. Ein direkter Vergleich der beiden Transportmöglichkeiten war aufgrund der geringen Daten der Versuche mit Fahrradkindersitzen nur bedingt möglich. Tendenziell ist der Transport der Kinder im Fahrradanhänger als weniger gefährlich zu bewerten. Es werden die Vor- und Nachteile dargestellt. Zur Bewertung der Sicherheit von Fahrradanhängern wurden die folgenden Prüfmethoden erarbeitet: - Pendelschlagprüfung für die gesamte Chassisstruktur; - Kopffreiheitsprüfung; - Belastungsprüfung der Aufbaustruktur; - Festigkeitsprüfung der Gurtsysteme. Die Prüfungen sind so aufgebaut, dass sie mit einfachen Mitteln durchzuführen sind. Es sollte somit jedem Anhängerhersteller möglich sein, die passive Sicherheit seiner Produkte umfassend zu untersuchen. Die Prüfverfahren für die Sicherheitsbewertung sollen in eine DIN-Norm und in das Merkblatt für Fahrradanhänger einfließen. Der Original-Forschungsbericht enthält einen umfangreichen Fotoband zu den Einzelheiten der Versuche und Versuchsaufbauten sowie zu den Beschädigungen der Prüfobjekte und kann bei der BASt eingesehen werden.
Die vorliegende Studie untersucht die Auswirkung der Ausstattung von Motorrädern mit Anti-Blockier-System (ABS) auf die Fahrsicherheit von Motorrädern. Hierzu wurden Fahrversuche im realen Verkehr und auf abgesperrter Teststrecke durchgeführt. Erfahrene und wenig erfahrene Motorradfahrer absolvierten Testfahrten auf nasser und trockener Fahrbahn mit und ohne ABS-Aktivierung des Motorrades. Bei den Versuchsfahrten kam es zu einigen kritischen Fahrsituationen, bei denen die Versuchspersonen insbesondere zu Beginn des Bremsmanövers von ihrem "normalen" Bremsverhalten abwichen. Bei blockierendem Hinterrad wurde der Bremsdruck vorne und hinten reduziert, was zu einer deutlichen Bremswegverlängerung führte. Bei den Vollbremsungen unter idealen Bedingungen auf abgesperrter Strecke wurden von erfahrenen Fahrern ohne ABS kürzere Bremswege als mit ABS erreicht. Kurvenbremsungen mit ABS-Regelung wurden im mittleren Geschwindigkeits- und Schräglagebereich fahrstabil durchgeführt. Die Ergebnisse zeigen, dass selbst erfahrene Motorradfahrer Bremsweg in kritischen Situationen verschenken. Geeignete Antiblockiersysteme könnten Motorradfahrern die Angst vor Radblockaden nehmen. Dies dürfte einen erheblichen Beitrag zur Steigerung der aktiven Sicherheit leisten.
This paper will outline ETSC's contribution to the European Union's road safety policy 2011-2020. It will present some of the main recommendations from ETSC's Blueprint for the 4th Road Safety Action Programme and will introduce the response to the European Commission's Road Safety Policy Orientations 2011-2020 (published July 2010). The second framework document presented is the Transport White Paper (published March 2011). The paper will focus on new targets and the new vision set for Europe's Road Safety policy picking out some issues in particular such as traffic law enforcement and the protection of vulnerable road users. It will argue that by reinforcing the current Road Safety Policy Orientations, the EU will be better placed to reach its new ambitious goal of halving road deaths by 2020 and the longer term zero casualty vision.
It is very important for Automotive OEMs to get feedback on their product performance on real roads for continuous improvement. Every OEM has a way of collecting this feedback for various performance parameters. Systematic accident research is a way to generate the information related to safety performance of the vehicle. In India, while there is a large amount of data related to the accidents, it is found this data is aimed at understanding the gross statistics and not directly useful for technology development. This paper explains learnings from a pilot study carried out in collaboration with an Emergency Medical Services provider on one of the expressways (motorways). This pilot study has resulted in development of working model that could now be scaled up at for wider application. The paper also presents some of the important observations based on the data collected.
While accident statistics on a national level are provided by many countries, there is a need for international data that includes more detailed information about the accident, so called in-depth data. As a consequence, accident data projects have been emerging in different regions of the world. This creates a need for comparable and mergeable data from different countries, enabling the use of already existing accident data resources and helping to expedite the improvement of global road safety. While existing approaches focus that mostly on building a comprehensive accident database from scratch, the iGLAD project (Initiative for the Global Harmonization of Accident Data) attempts a more pragmatic approach by building on top of the work already accomplished in this area and complementing it. The target of iGLAD is to help setting up an additional dataset as a compatibility layer between already existing world wide data sets and integrating the structure of these by defining a common data scheme. This dataset is limited to the common denominator between the existing data sets and is inherently rather small and simple. Eventually, an individual converter for each participating accident investigation group will be built that enables pooling all data sets in a common repository. This not only saves costs and time, and hence makes such a target more feasible, but also creates data that is usable right from the start. This paper gives an overview of the current status of iGLAD and first steps taken. Additionally, some methodological aspects are discussed, next to a glance at other projects working currently on related issues, providing additional input for iGLAD. Finally, an overview of next steps and intended future work is given.
The increasing economics in India has an enormous growth of its road traffic. As observed from official Indian accident statistics the number of road fatalities are one of the highest worldwide. In contrast to most industrialized nations they have an rapidly increasing trend. To come along with this trend it becomes more than essential to understand the traffic accident situation. The official Indian accident statistics gives a glimpse of only basic information. Therefore more detailed data is needed. By using In-depth accident data and officially representative statistics the current accident situation can be evaluated in India, if a suitable weighting methodology is considered. Hence in 2009/2010 a pilot study with the collaboration partner JP-Research India pvt. Ldt. was gathered in Tamil Nadu in south of India. In-depth accident investigations were done around the Coimbatore area on four highways. At first, the collected data is evaluated. Due to consequent and continuous further development based on the first approach a methodology similar to NASS/CDS/GES in the US and GIDAS in Germany was developed. Of course all relevant accident related parameters including pictures and severity information were collected. As a matter of fact based on scaled sketches and reconstruction benefit analyses can be done in order to analyze the accident scenery in India. As a first outcome influence from infrastructure, missing education and vehicle safety were identified as key parameters in order to reduce the number of accidents and casualties. To compare the accident situation against international standards an accident classification for left hand traffic was developed based on the German Insurance classification system. Looking into detail additional accident types were identified and added to create an Indian accident type catalogue. The positive results encouraged several OEMs to participate in this investigation and together with BOSCH a consortium was established in 2010/11. Within one year from beginning in May 2011 about 200 highway accidents were collected, reported and reconstructed using the new standard. Hence a first good overview of the accident situation is available for the Coimbatore Tamil Nadu area. The major target for establishing accident investigations is the extension towards other states of India and urban areas to achieve a better overview of the accident scenery. Therefore local and national authorities have to be embedded in order to strengthen the awareness against traffic safety.
Since 2008, the authors inspected fatal traffic accidents on the spot every year, with the cooperation of Toyota police station in Aichi pref. In the jurisdiction, numbers of fatal accidents were 18 in 2008, 12 in 2009, 14 accidents in 2010, and 16 in 2011. We here report the results of our analysis of information obtained by detailed inspection for those that occurred from 2008 to 2010. We focused on vehicle-to-pedestrian accidents, which accounted for about 45% of all accidents in 2008. Because many accidents occurred on residential roads not far from pedestrians" homes, it was revealed that the decrease of the collision speed by traffic calming such as humps and zone speed management, was highly effective. On the other hand, pedestrian detection technologies seemed to be also effective as a countermeasure on vehicle side. Every pedestrian position against a vehicle was clarified and TTC (Time to Collision) was calculated provisionally. Pedestrian accidents in intersections were also examined. Among the intersection pedestrian accidents within the jurisdiction, compared with the national average in Japan, the ratio of intersections without a signal and the ratio without a pedestrian crossing were high. According to the comparison of the Japanese traffic accident patterns between 2001 and 2008, pedestrian accidents during turning right and turning left did not decrease much. For elderly drivers, these accidents occurred very often. Finally, single vehicle accidents were analysed with the accident pattern analysis methods used above. There were high numbers of single vehicle accidents against object on single roads. Although fatal accidents against guardrails decreased, the numbers of fatal accidents against a utility pole and a sign pole were nearly constant. As for the impact with narrow width objects such as utility poles, the fatality rate was very high, and countermeasures of both road infrastructure and vehicles seem to be effective.
Beside numerous information about vehicles injuries and environmental data the GIDAS database contains detailed reconstruction data. This data is calculated by a reconstruction engineer who handles about 1000 accidents per year. The spectrum of one reconstruction ranges from simple crossing accidents to complex run-off accidents with rollover events. Especially for complex accident scenarios there is a large effort to design the environment of the accident scene within PC-Crash ®. To reduce the reconstruction time by maintaining the high quality of reconstruction 3D-geodata can be useful. Geodata is available for nearly every area in Germany and can be used for a fast and detailed creation of complex accident environments. In combination with the accident sketch areal images of the accident scene can be created and the participants are implemented in the new-built 3D-reconstruction environment. As a consequence, the characteristics of the terrain can be considered within the reconstruction which is especially important for run-off accidents.
Rollovers continue to be a major source of heavy truck fatalities when compared to other accident modes. Real world rollover accidents are analyzed and two distinct damage patterns are identified. Damage to heavy truck roofs can occur from lateral loading that transitions to vertical roof loading as the vehicle rolls onto its side and then over onto its roof. A second load path can occur when the vehicle has rolled onto its side and furrows into the ground generating large longitudinal friction forces between the roof and ground. A review of the previous literature and various test methodologies are presented. A sled impact test methodology is presented which allows for structural assessment of a heavy truck cab's crashworthiness in both of these loading environments. Two test series are presented using the sled impact test methodology in order to analyze real world truck rollovers using varying impact platen and contact angles. The structural deformation and failure patterns were found to be consistent with damage seen in real world accident vehicles. In each case, a second equivalent truck cab was then reinforced and tested under similar conditions to evaluate the energy management and crush resistance of a stronger cab structure. These structural reinforcements demonstrated a substantial reduction in roof crush and protected the survival space of the occupant compartment. The sled impact test procedure is an effective method for testing the structural performance of a heavy truck cab in a variety of loading scenarios comparable to real world accidents and ascertaining the load and energy load levels in these accident modes.
In 2012 the fifth ESAR conference (Expert Symposium on Accident Research) was held in Hannover. ESAR is an international convention of experts, who analyze traffic accidents all over the world and discuss their results in this context, conducted at the Medizinische Hochschule Hannover every 2 years. It connected representatives of public authorities, engineers in automotive development and scientists and offers a forum with particular emphasis on In-Depth-Analyses of accident statistics and accident analyses. Special focus is placed on research on the basis of so-called "In-Depth-Accident-Investigations" [data collections at the sites of the accidents], which are characterized by extensive documentations of the sites of the accidents, of the vehicles as well as of the injuries, encompassing several scientific fields. ESAR aims at a multi-disciplinary compilation of scientific results and at discussing them on an international, scientific level. It is thus a scientific colloquium and a platform for exchanging information for all accident researchers. Experiences in accident prevention as well as in the complex field of accident reconstruction are stated and new research fields are added. Existing results of long-term research work in Europe, the US, Australia and Japan include different infrastructural correlations and give findings on population, vehicle population and driver characteristics, which offer a basis for recommendations to be derived and measures for increasing road safety.
Im Jahr 2004 fand an der Medizinischen Hochschule Hannover die erste ESAR-Konferenz (Expert Symposium on Accident Research) statt. Die Idee einer internationalen Konferenz war aus der Notwendigkeit entstanden, diejenigen Experten zusammen zu bringen, die weltweit tätig sind und Verkehrsunfälle wissenschaftlich analysieren, um ihre Ergebnisse gemeinsam zu diskutieren und einem Zielpublikum von Behördenvertretern, Entwicklungsingenieuren der Automobilindustrie und anderen Wissenschaftlern darzubringen. Die durch Professor Otte initiierte und nun zum vierten Male organisierte Konferenz fand eine breite Akzeptanz und ist mittlerweile Bestandteil einer Konferenzlandschaft mit Zielvorträgen von der Fahrzeugsicherheit bis hin zur Verletzungsanalyse und den Unfallursachen. ESAR kann als wissenschaftliches Kolloquium und Plattform für einen Informationsaustausch der Unfallforscher angesehen werden, die sich speziell mit Methoden der Unfalluntersuchung, mit Verletzungsmechanismen und der Bewertung von Verletzungen, Unfallursachen und anderen Bereichen der statistischen Unfalldatenanalyse befassen. Experten aus den Bereichen der Medizin, der Verkehrspsychologie und der Technik sowie Vertreter zuständiger Behörden kommen hier zusammen, um die Erfahrungen in der Unfallprävention und der Unfallrekonstruktion zu diskutieren und um der Forschung neue Felder zu eröffnen. Neben den Belangen der Europäischen Gemeinschaft werden auch die weltweit zu registrierenden hohen Verletztenzahlen berücksichtigt. Wissenschaftliche Vorträge aus aller Welt tragen dazu bei, geeignete Maßnahmen und Methoden zur Analyse und drastischen Verringerung der Zahl der bei Verkehrsunfällen Getöteten zu entwickeln. Die Zusammensetzung des Teilnehmerkreises dieser wie früherer ESAR-Konferenzen hat längst eine über Europa hinausgreifende Internationalitaet erreicht und bietet daher einen aufschlussreichen Überblick über die verschiedenen Standards bestehender Verkehrssicherheit und unterschiedlichen Unfallszenarien und über die Anforderungen an die Unfallanalysen. Die Ergebnisse langjähriger Forschungsarbeiten in Europa, USA, Australien und asiatischen Ländern beinhalten unterschiedliche infrastrukturelle Zusammenhänge und geben Erkenntnisse über Population, Fahrzeugbestand und Fahrereigenschaften. Derartige Informationen bilden eine exzellente Basis für abzuleitende Empfehlungen und Maßnahmen für die Erhöhung der Verkehrssicherheit international.
Before 2002, France was in the queue of Europeans countries in terms of road safety results because of the low density of population and the faulty behaviour of French due itself to a very low level of traffic law enforcement Even if there were signs of the change of mind in France towards road safety before, the turning point was in summer 2002, when the President declared road safety as a priority work during his mandate. The more symbolic measure was the decision to settle an automatic speed control system (700 fixed and 300 mobile). Over three years, the average speed on French roads decreased by 5 km/h and the number of fatalities on road turned down from an average of 8000 deaths per year to 5 300, which represents a decrease of more than 34 %. For the next months, we anticipate that, as many drivers have kept loosing points on their driving licence through light speed violations, this will lead drivers to check their speed and the speed limits more systematically as loosing points on one's driving license has longer time effects than paying a fine. Consequently, we expect a decrease of 10 % to 15% of fatalities in 2006, which is a very good result if we compare with the trend of the last twenty five years (about 2,3 %). The reverse effect of this system that lies on the changes of behaviour of the majority is that, there is more and more discontent against the system taking into account that automatic speed control system allows only a minor tolerance above limits and that local speed limits are not always adapted to local infrastructure and traffic conditions. Another weakness of the system is that motorcyclists are too rarely caught by the system; the system is being gradually improved by placing the new speed cameras in position of taking photographs of the back of the vehicle. But this would not be sufficient to reduce the speed of motorcyclists that are a very high risk group (16% of fatalities for 0,8 % of traffic) For alcohol, there is no easy route for progress: all what is done nowadays is toward festive impaired driving (through designating sober drivers or mass alcohol preventive screenings) although there is not enough done towards chronic alcoholic driving.
Der Allgemeine Deutsche Automobil-Club e.V. (ADAC) und die Bundesanstalt für Straßenwesen (BASt) veranstalteten am 13. Oktober 2006 in Baden-Baden das 6. Symposium "Sicher fahren in Europa". Die Fachvorträge befassten sich mit den Themenbereichen: Ansätze zu mehr Verkehrssicherheit, - Verbesserung der Fahrzeugsicherheit, - Besondere Zielgruppen. Die CD-ROM dokumentiert die Grußworte, die Referate und die Podiumsdiskussion.
Event Data Recorder (EDR) is an additional function installed in airbag control module (ACM) to record vehicle and occupant information for a brief period of time before, during, and after a crash event. EDRs are now being installed in ACMs by several automakers in the USA and in Japan. The aim of this study is to understand the performance of EDRs for the improvement of accident reconstruction with more reliable information. In the first report of the study, data obtained from EDRs of seven vehicle types were evaluated using 2006-2007 J-NCAP (Japanese new car assessment program) full-lap frontal barrier crash tests and offset frontal deformable barrier crash tests data. For more practical standpoint, we conducted thirteen crash tests reconstructing typical real-world accidents such as single vehicle accidents with barriers or poles, car to car accidents and multi rear-end collisions focusing on Japanese typical accident types. Data obtained from EDRs are compared with data obtained from optical speed sensor, instrumented accelerometers and high speed video cameras. The velocities determined from pre-crash data of EDRs and the maximum change in velocity, delta-V, and delta-V time history data obtained from post-crash data of EDRs are analyzed. The results are as follows: - Pre-crash velocities of EDRs were very accurate and reliable. An average difference between the EDR recording values and reference speeds was 4.2% and a root mean square of the differences was 9.2%. Only two cases resulted large differences for the pre-crash velocity. Both of them were cases with braking prior to the collision. However, another test with braking resulted less difference. The braking condition may influence accuracy of pre-crash velocities. - Maximum delta-Vs obtained from the EDRs showed uncertainty of measurement in several cases in comparisons with the reliable delta-V data. The differences in maximum delta-V were more than 10% in five of twenty-five events data and more than 20% in two of twenty-five events data. An average of the all differences was about 4% and root mean square of the differences was about 11%. Especially large deformation at narrow area may influence accuracy of post-crash delta-V. - Multiple rear-end crash tests were reconstructed using EDRs data as case studies. Some EDRs recorded two events and a time gap between two events, so that these reconstruction case studies were very accurate and reliable. - If though only one of three vehicles in multiple rear end crash was equipped EDR, overview and velocities of all cars may be reconstructed using these limited EDR data. In this case study, leading car- EDR data and middle car- EDR data were valuable. However if only following car was equipped EDR, the reconstruction was not accurate
Elektronik und IT werden auch im Automobilbereich zunehmend Gegenstand unautorisierter Veränderungen. Diese Studie stellt einen ersten, breiteren Überblick über die praktische Relevanz elektronischer Veränderungen an Fahrzeug- und Infrastruktursystemen dar. Es liefert einen Überblick über wesentliche bekannte und existente Beispiele von Möglichkeiten derartiger Veränderungen, das Risiko ihres Auftretens und damit verbundene Gefahren. Die Ergebnisse basieren auf einer Recherche, die neben wissenschaftlichen Quellen insbesondere das Internet als neues, interaktives Medium einbezieht. Es werden Abschätzungen zur praktischen Relevanz dieser Veränderungen vorgenommen und potentielle Folgen insbesondere für die Verkehrssicherheit reflektiert. Praktische Hinweise auf elektronische Veränderungen sind an 24 Fahrzeug- und Infrastruktursystemen dokumentiert, die als Ziel teils mehrerer Arten von elektronischen Veränderungen identifiziert wurden. Dies erstreckt sich über verschiedene Domänen wie u.a. den Antriebstrang, das Fahrwerk, Infotainment, Fahrerassistenz und mehrere Infrastrukturkomponenten. Diese Systematisierung enthält zudem eine Klassifikation der agierenden Personen, wobei deren individuelle Motivationen, technische Kenntnisse und Ausstattung unterschieden werden. Das Spektrum potentiell resultierender Gefahren wird einerseits theoretisch anhand der erstellten Systematisierungen aufgezeigt und andererseits an 19 Rechercheergebnissen aus verschiedenen Bereichen illustriert. Die so vorgenommene Analyse des Gefährdungspotentials wird ergänzt durch einen Ausblick auf potentielle zukünftige Gefährdungen, die sich insbesondere in kommenden Car-to-Car Kommunikationsnetzen ergeben könnten und die weitere Erforschung von Schutzkonzepten motivieren. Während die recherchierten Veränderungen heute noch meist vom Nutzer ausgehen und das Gefährdungspotential häufig unbeabsichtigt entsteht, könnte zukünftig das vorsätzliche Herbeiführen von Gefährdungen an Bedeutung gewinnen.
Entwicklung eines methodischen Rahmenkonzepts für Verhaltensbeobachtung im fließenden Verkehr
(2012)
Vielfach soll durch Verkehrsbeobachtung die Entwicklung des Verkehrsverhaltens im Zeitverlauf aufgezeigt und/oder die Wirksamkeit von Verkehrssicherheitsmaßnahmen bewertet werden. Charakteristisch dabei ist, dass bislang für jedes Vorhaben ein eigenes Studiendesign entwickelt wird, obwohl sich die jeweiligen Forschungsfragen trotz ihrer inhaltlichen Vielfalt aus methodischer Sicht auf einige wenige Grundmuster von Aufgabenstellungen reduzieren lassen. Im vorliegenden Forschungsvorhaben geht es deshalb darum, für Erhebungen, bei denen das Verhalten von Verkehrsteilnehmern im fließenden Verkehr beobachtet wird, ein möglichst allgemein anwendbares Design zu entwickeln. Ziel des vorliegenden Projektes ist es somit auch, das Spektrum der Methodik von Verhaltensbeobachtungen im fließenden Verkehr darzustellen sowie auf Probleme und Randbedingungen aufmerksam zu machen. Damit soll all denjenigen eine Hilfestellung gegeben werden, die beabsichtigen, solche Studien durchzuführen. In Kapitel 2 des Berichts werden zunächst einige nationale und internationale Projektbeispiele für Verhaltensbeobachtungen im fließenden Verkehr vorgestellt, auf deren Basis dann das hier in Rede stehende methodische Rahmenkonzept entwickelt wird. Kapitel 3 enthält eine Einordnung der Erhebungsmethode Verhaltensbeobachtung in den konzeptuellen Rahmen der Statistik und empirischen Sozialforschung. Im 4. Kapitel werden statistische Kennzahlen des Verkehrsverhaltens, die aus Beobachtungen gewonnen werden können, systematisiert und zusammengestellt. Kapitel 5 beschäftigt sich mit für Verhaltensbeobachtungen adäquaten Stichprobendesigns, in Kapitel 6 sind die zugehörigen Formeln für die Hochrechnung und Genauigkeitsbeurteilung (Konfidenzintervalle) der Ergebnisse aufgeführt. Kapitel 7 enthält einige methodische Hinweise zu Möglichkeiten und Grenzen der Ziehung einer Zufallsstichprobe für Verhaltensbeobachtungen, in Kapitel 8 wird der Prozess einer Verhaltensbeobachtung unter erhebungspraktischen Gesichtspunkten - basierend auf dem entwickelten Rahmenkonzept - beleuchtet. Vor der Zusammenfassung und den Empfehlungen (Kap. 10) wird in Kapitel 9 noch ein Vergleich des hier entwickelten methodischen Rahmenkonzepts mit der Vorgehensweise bei den aktuellen Erhebungen der BASt zum Schutzverhalten angestellt. In den Schlussbericht sind auch die Ergebnisse eines Workshops eingeflossen, der im Rahmen dieses Projekts am 18.01.2010 in Bergisch Gladbach durchgeführt wurde.
Internationally, the need is expressed for harmonized traffic accident data collection (PSN, PENDANT, etc.). Together with this effort of harmonization, traffic accident investigation moves more and more in the direction of accident causation. As current methods only partly address these needs, a new method was set up. The main characteristics of this method are: • Accident/injury causation (associated) factors can objectively be identified and quantified, by comparison with exposure information from a normal population. • All relevant accident and exposure data can be included: human-, vehicle-, and environmental related data for the pre-crash, crash and postcrash situation (the so-called Haddon matrix). The level of detail can be chosen depending on interest and/or budget, which makes the method very flexible. In this paper the accident collection and control group method are presented, including some of the achieved results from a pilot study on 30 truck accidents and 30 control locations. The data were analyzed by using cross-tabulations and classification-tree analysis. The method proved useful for the identification of statistically significant causational aspects.
In Germany, in-depth accident investigations are carried out in the Hannover area since 1973. In 1999 a second region was added with surveys in Dresden and the surrounding area. Internationally, the acronym GIDAS (German In-Depth Accident Study) is commonly used for these surveys. Compared to many other countries, the sample sizes of the GIDAS surveys are much larger. The goal is to collect 1.000 accidents involving personal injuries per year and region. Data collection takes place by using a sampling procedure, which can be interpreted as a two-stage process with time intervals as primary units and accidents as secondary units. An important question is, to what extend these samples are representative for the target population from which they are drawn. Analyses show, for example, that accidents with persons killed or seriously injured are overrepresented in the samples compared to accidents with slightly injured persons. This means, that these data are subject to biases due to uncontrolled variation of sample inclusion probability. Therefore, appropriate weighting and expansion methods have to be applied in order to adjust or correct for these biases. The contribution describes the statistical and methodological principles underlying the GIDAS surveys with respect to sampling procedure, data collection and expansion. In addition, some suggestions regarding potential improvements of study design are made from a methodological point of view.
The need for improved EU level accident information and data was identified in the EU White Paper on Transport Policy (2001)1 and detailed in the Road Safety Action Plan (2003)2. The plan specifies that the EC will develop a road safety observatory to coordinate data collection within an integrated framework.
This study is aimed to investigate the correlations of impact conditions and dynamic responses with the injuries and injury severity of child pedestrians by accident reconstruction. For this purpose, the pedestrian accident cases were selected from Sweden and Germany with detailed information about injuries, accident cars, and accident environment. The selected accident cases were reconstructed using mathematical models of pedestrian and passenger car. The pedestrian models were generated based on the height, weight, and age of the pedestrian involved in accidents. The car models were built up based on the corresponding accident car. The impact speeds in simulations were defined based on the reported data. The calculated physical quantities were analyzed to find the correlation with injury outcomes registered in the accident database. The reconstruction approaches are discussed in terms of data collection, estimating vehicle impact speeds, pedestrian moving speeds and initial posture, secondary ground impact, validity of the mathematical models, as well as impact biomechanics.