Filtern
Erscheinungsjahr
Dokumenttyp
- Konferenzveröffentlichung (409)
- Wissenschaftlicher Artikel (37)
- Buch (Monographie) (18)
- Teil eines Buches (Kapitel) (9)
- Arbeitspapier (8)
- Bericht (1)
Sprache
- Englisch (482) (entfernen)
Schlagworte
- Conference (279)
- Konferenz (277)
- Germany (178)
- Deutschland (174)
- Unfall (163)
- Accident (162)
- Injury (116)
- Verletzung (116)
- Safety (102)
- Sicherheit (97)
- Unfallrekonstruktion (80)
- Analyse (math) (69)
- Analysis (math) (68)
- Bewertung (67)
- Schweregrad (Unfall, Verletzung) (66)
- Evaluation (assessment) (65)
- Vehicle (65)
- Fahrzeug (64)
- Severity (accid, injury) (64)
- Statistics (64)
- Fußgänger (63)
- Pedestrian (63)
- Statistik (63)
- Simulation (59)
- Tödlicher Unfall (59)
- Fatality (58)
- Anfahrversuch (56)
- injury) (54)
- Reconstruction (accid) (53)
- Verletzung) (52)
- Datenbank (51)
- Schweregrad (Unfall (51)
- Severity (accid (49)
- Car (46)
- Datenerfassung (46)
- Collision (45)
- Data acquisition (45)
- Europa (45)
- Europe (45)
- Impact test (veh) (45)
- Unfallverhütung (45)
- Accident prevention (44)
- Test method (44)
- Zusammenstoß (43)
- Prüfverfahren (42)
- On the spot accident investigation (41)
- Untersuchung am Unfallort (40)
- Active safety system (38)
- Cause (38)
- Frontalzusammenstoß (38)
- Ursache (38)
- Radfahrer (37)
- Test (37)
- Aktives Sicherheitssystem (36)
- Data bank (36)
- Fahrerassistenzsystem (36)
- Head on collision (36)
- Cyclist (35)
- Versuch (35)
- Driver (34)
- Driver assistance system (34)
- Fahrer (34)
- Passives Sicherheitssystem (34)
- Passive safety system (31)
- Geschwindigkeit (30)
- Method (30)
- Verfahren (30)
- Leistungsfähigkeit (allg) (29)
- Speed (29)
- Accident reconstruction (27)
- Insasse (27)
- Motorcyclist (27)
- Motorradfahrer (27)
- Efficiency (25)
- Anthropometric dummy (24)
- Dummy (23)
- Risiko (23)
- Vehicle occupant (23)
- Behaviour (22)
- Measurement (22)
- Verhalten (22)
- PKW (21)
- Pkw (21)
- Risk (21)
- Child (20)
- Improvement (20)
- Kind (20)
- Messung (20)
- Risikobewertung (20)
- Verbesserung (20)
- Brustkorb (19)
- Forschungsarbeit (19)
- Risk assessment (19)
- Seitlicher Zusammenstoß (19)
- Biomechanics (18)
- Biomechanik (18)
- Head (18)
- Kopf (18)
- Lorry (18)
- Motorrad (18)
- Rechenmodell (18)
- Sicherheitsgurt (18)
- Side impact (18)
- Alte Leute (17)
- Interview (17)
- Kompatibilität (17)
- Mathematical model (17)
- Motorcycle (17)
- Research project (17)
- Thorax (17)
- Benutzung (16)
- Compatibility (16)
- Development (16)
- Entwicklung (16)
- Old people (16)
- Prevention (16)
- Use (16)
- Berechnung (15)
- Deformation (15)
- Prognose (15)
- Safety belt (15)
- Accident rate (14)
- Auffahrunfall (14)
- Calculation (14)
- Leg (human) (14)
- Rear end collision (14)
- Transport infrastructure (14)
- Verformung (14)
- Airbag (13)
- Belastung (13)
- Database (13)
- Load (13)
- Unfallhäufigkeit (13)
- Bremsung (12)
- EU (12)
- Fahrzeugsitz (12)
- Fehler (12)
- Forecast (12)
- International (12)
- Lkw (12)
- Modification (12)
- Sensor (12)
- Standardisierung (12)
- Vehicle regulations (12)
- Überschlagen (12)
- Braking (11)
- Cost benefit analysis (11)
- Digital model (11)
- Error (11)
- Human factor (11)
- Interior (veh) (11)
- Menschlicher Faktor (11)
- Numerisches Modell (11)
- Research report (11)
- Schutzhelm (11)
- Seat (veh) (11)
- Technische Vorschriften (Kraftfahrzeug) (11)
- Verhütung (11)
- Verkehrsinfrastruktur (11)
- Verminderung (11)
- Veränderung (11)
- Wirtschaftlichkeitsrechnung (11)
- Antikollisionssystem (10)
- Bein (menschl) (10)
- Bemessung (10)
- Crash helmet (10)
- Decrease (10)
- Design (overall design) (10)
- Fahrzeuginnenraum (10)
- Gesetzgebung (10)
- Impact test (10)
- Krankenhaus (10)
- Legislation (10)
- Overturning (veh) (10)
- Politik (10)
- Tunnel (10)
- USA (10)
- Weather (10)
- Wirbelsäule (10)
- Age (9)
- Air bag (restraint system) (9)
- Alter (9)
- Autobahn (9)
- Automatisch (9)
- Collision avoidance system (9)
- Erste Hilfe (9)
- Fahranfänger (9)
- Fahrzeugführung (9)
- Front (9)
- Hospital (9)
- Japan (9)
- Knotenpunkt (9)
- Policy (9)
- Recently qualified driver (9)
- Standardization (9)
- Witterung (9)
- Automatic (8)
- Autonomous driving (8)
- Bridge (8)
- Brücke (8)
- Driver information (8)
- Driving (veh) (8)
- Drunkenness (8)
- Durability (8)
- Forschungsbericht (8)
- Fracture (bone) (8)
- Halswirbel (8)
- Knee (human) (8)
- Knochenbruch (8)
- Oberflächentextur (8)
- Perception (8)
- Shock (8)
- Surface texture (8)
- Technologie (8)
- Technology (8)
- Trunkenheit (8)
- Vereinigtes Königreich (8)
- Verkehrsteilnehmer (8)
- Wahrnehmung (8)
- Austria (7)
- Cervical vertebrae (7)
- Dauerhaftigkeit (7)
- Detection (7)
- Fahrstabilität (7)
- First aid (7)
- Human body (7)
- Impact sled (7)
- Impact study (7)
- Menschlicher Körper (7)
- Motorway (7)
- Norm (tech) (7)
- Ort (Position) (7)
- Road user (7)
- Schlag (7)
- Sichtbarkeit (7)
- Specification (standard) (7)
- Specifications (7)
- Spinal column (7)
- Straßenentwurf (7)
- Unterhaltung (7)
- Vehicle handling (7)
- Sichtbarkeit (7)
- Österreich (7)
- Adolescent (6)
- Aufprallschlitten (6)
- Ausrüstung (6)
- Automatische Notbremsung (6)
- Autonomes Fahren (6)
- China (6)
- Correlation (math, stat) (6)
- Deformierbare Barriere (Anpralltest) (6)
- Distraction (6)
- Driver training (6)
- Emission (6)
- Environment (6)
- Equipment (6)
- Fahrausbildung (6)
- Fahrerinformation (6)
- Fire (6)
- Highway design (6)
- India (6)
- Indien (6)
- Jugendlicher (6)
- Junction (6)
- Knie (menschl) (6)
- Location (6)
- Maintenance (6)
- Portugal (6)
- Probability (6)
- Reaction (human) (6)
- Reaktionsverhalten (6)
- Richtlinien (6)
- Road traffic (6)
- Schweden (6)
- Software (6)
- Steifigkeit (6)
- Stiffness (6)
- Surfacing (6)
- Vorn (6)
- Wahrscheinlichkeit (6)
- Wirksamkeitsuntersuchung (6)
- Abbiegen (5)
- Ablenkung (psychol) (5)
- Activity report (5)
- Analyse (Math) (5)
- Angle (5)
- Autonomous emergency braking (5)
- Bicycle (5)
- Body (car) (5)
- Classification (5)
- Condition survey (5)
- Damage (5)
- Deformable barrier (impact test) (5)
- Delivery vehicle (5)
- Detektion (5)
- Echtzeit (5)
- Eins (5)
- Einstellung (psychol) (5)
- Electronic stability program (5)
- Emergency (5)
- Ergonomics (5)
- Fahrrad (5)
- Fahrsimulator (5)
- Finite element method (5)
- Frau (5)
- Gefahrenabwehr (5)
- Gewicht (5)
- Intelligent transport system (5)
- Kamera (5)
- Karosserie (5)
- Kontrolle (5)
- Korrelation (math, stat) (5)
- LKW (5)
- Landstraße (5)
- Lebenszyklus (5)
- Lärm (5)
- Noise (5)
- Notfall (5)
- One (5)
- Post crash (5)
- Rehabilitation (5)
- Reproducibility (5)
- Reproduzierbarkeit (5)
- Rigid pavement (5)
- Rural road (5)
- Sachschaden (5)
- Schutzeinrichtung (5)
- Security (5)
- Simulator (driving) (5)
- Straßenverkehrsrecht (5)
- United Kingdom (5)
- Weight (5)
- Winkel (5)
- Zustandsbewertung (5)
- Abdomen (4)
- Absorption (4)
- Anti locking device (4)
- Attitude (psychol) (4)
- Betonstraße (Oberbau) (4)
- Bremse (4)
- Bus (4)
- Camera (4)
- Coefficient of friction (4)
- Collision test (veh) (4)
- Communication (4)
- Contact (tyre road) (4)
- Crashtest (4)
- Decision process (4)
- Decke (Straße) (4)
- Dynamics (4)
- Dynamik (4)
- Eigenschaft (4)
- Electric vehicle (4)
- Elektrofahrzeug (4)
- Elektronisches Stabilitätsprogramm (4)
- Enforcement (law) (4)
- Entscheidungsprozess (4)
- Erziehung (4)
- Estimation (4)
- Fahrdatenschreiber (4)
- Fahrgeschicklichkeit (4)
- Feuer (4)
- France (4)
- Frankreich (4)
- Frequency (4)
- Führerschein (4)
- Gesetzesdurchführung (4)
- Highway (4)
- In situ (4)
- Information (4)
- Klassifizierung (4)
- Kommunikation (4)
- Kraftfahrzeug (4)
- Medical aspects (4)
- Medizinische Gesichtspunkte (4)
- Messgerät (4)
- Methode der finiten Elemente (4)
- Occupant (veh) (4)
- Official approval (4)
- Organisation (4)
- Planning (4)
- Planung (4)
- Properties (4)
- Quality (4)
- Quality assurance (4)
- Qualität (4)
- Qualitätssicherung (4)
- Real time (4)
- Regression analysis (4)
- Regressionsanalyse (4)
- Rehabilitation (road user) (4)
- Reibungsbeiwert (4)
- Road construction (4)
- Road network (4)
- Safety fence (4)
- Schallpegel (4)
- Seite (4)
- Severity (acid (4)
- Sound level (4)
- Straße (4)
- Straßennetz (4)
- Surveillance (4)
- Sweden (4)
- Temperatur (4)
- Traffic (4)
- Traffic engineering (4)
- Traffic regulations (4)
- Umwelt (4)
- Unfallfolgemaßnahme (4)
- Unterleib (4)
- Verkehr (4)
- Wet road (4)
- Woman (4)
- Accuracy (3)
- Air pollution (3)
- Antiblockiereinrichtung (3)
- Apparatus (measuring) (3)
- Arzneimittel (3)
- Attention (3)
- Aufmerksamkeit (3)
- Bau (3)
- Bauwerksmonitoring (3)
- Bearing capacity (3)
- Befreiung (Bergung) (3)
- Bein (3)
- Beton (3)
- Blickfeld (3)
- Boden (3)
- Brake (3)
- Brücken Management System (3)
- Capacity (road, footway) (3)
- Carbon dioxide (3)
- Coach (3)
- Concrete (3)
- Construction (3)
- Cost (3)
- Crash Test (3)
- Crash test (3)
- Czech Republic (3)
- Data base (3)
- Deicing (3)
- Digitale Bildverarbeitung (3)
- Driving aptitude (3)
- Education (3)
- Effectiveness (3)
- Empfindlichkeit (3)
- Entdeckung (3)
- Ergonomie (3)
- Event data recorder (road vehicle) (3)
- Extrication (3)
- Fahrbahnüberquerung (3)
- Fahrtauglichkeit (3)
- Field of vision (3)
- Frequenz (3)
- Griffigkeit (3)
- Hinten (3)
- Information documentation (3)
- Intelligentes Transportsystem (3)
- Intersection (3)
- Jahreszeit (3)
- Kapazität (Straße) (3)
- Kleidung (3)
- Kontakt Reifen Straße (3)
- Korea (Süd) (Demokratische Republik) (3)
- Kosten (3)
- Kunststoff (3)
- Lenken (Fahrzeug) (3)
- Level of service (3)
- Lieferfahrzeug (3)
- Life cycle (3)
- Luftverunreinigung (3)
- Main road (3)
- Man (3)
- Mann (3)
- Medication (3)
- Medizinische Untersuchung (3)
- Mobility (3)
- Mobilität (3)
- Nasse Straße (3)
- Oberbau (3)
- Overlapping (3)
- Passenger (3)
- Pavement (3)
- Plastic material (3)
- Prototyp (3)
- Prototype (3)
- Rear (3)
- Reifen (3)
- Reisebus (3)
- Republic of Korea (3)
- Run off the road (accid) (3)
- Season (3)
- Sensitivity (3)
- Skidding resistance (3)
- Skill (road user) (3)
- Soil (3)
- Spain (3)
- Spanien (3)
- Steering (process) (3)
- Straßenverkehr (3)
- Structural health monitoring (3)
- Sustainability (3)
- Telematics (3)
- Telematik (3)
- Temperature (3)
- Theorie (3)
- Theory (3)
- Time (3)
- Traffic control (3)
- Traffic count (3)
- Tragfähigkeit (3)
- Trend (stat) (3)
- Tschechische Republik (3)
- Tyre (3)
- United kingdom (3)
- Unterfahrschutz (3)
- Verkehrserhebung (3)
- Verkehrsqualität (3)
- Verkehrssteuerung (3)
- Verschiebung (3)
- Versuchspuppe (3)
- Visual display (3)
- Vorne (3)
- Windschutzscheibe (3)
- Zeit (3)
- Abfluss (2)
- Abkommen von der Fahrbahn (Unfall) (2)
- Ablenkung (2)
- Abstandsregeltempomat (2)
- Accompanied driving (2)
- Adult (2)
- Advanced driver assistance system (2)
- Anthropmetric dummy (2)
- Asphaltstraße (Oberbau) (2)
- Auftaumittel (2)
- Australia (2)
- Australien (2)
- Autonomes Fahrzeug (2)
- Autonomous vehicle (2)
- Battery (2)
- Baumusterzulassung (2)
- Begleitetes Fahren (2)
- Behinderter (2)
- Beinahe Unfall (2)
- Bicyclist (2)
- Bildschirm (2)
- Blutkreislauf (2)
- Brand (2)
- Bremsweg (2)
- Bridge deck (2)
- Bridge management system (2)
- Bruch (mech) (2)
- Calibration (2)
- Circulation (blood) (2)
- Climate change (2)
- Clothing (2)
- Compliance (specif) (2)
- Comprehension (2)
- Compression (2)
- Continuous (2)
- Cooperative intelligent transport system (2)
- Crash victim (2)
- Cross roads (2)
- Crossing the road (2)
- Cycle track (2)
- Cycling (2)
- Data processing (2)
- Data transmission (telecom) (2)
- Datenbasis (2)
- Datenverarbeitung (2)
- Datenübertragung (telekom) (2)
- Dehnungsmessstreifen (2)
- Depth (2)
- Deterioration (2)
- Deutschalnd (2)
- Diesel engine (2)
- Digital image processing (2)
- Disablement (2)
- Dreidimensional (2)
- Driving licence (2)
- Driving license (2)
- Driving test (2)
- Droge (2)
- Drugs (2)
- EU directive (2)
- EU-Richtlinie (2)
- Edge (2)
- Eichung (2)
- Eindringung (2)
- Eingabedaten (2)
- Electric bicycle (2)
- Electronic driving aid (2)
- Elektrofahrrad (2)
- Energie (2)
- Energy (2)
- Environment protection (2)
- Erwachsener (2)
- Eu (2)
- Exhaust aftertreatment (2)
- Experience (human) (2)
- Expert system (2)
- Expertensystem (2)
- Fahrbahnmarkierung (2)
- Fahrbahntafel (2)
- Fahrprüfung (2)
- Fahrstreifen (2)
- Fahrzeugteil (Sicherheit) (2)
- Fernverkehrsstraße (2)
- Festigkeit (2)
- Foot (not a measure) (2)
- Form (2)
- Fuel consumption (2)
- Fuß (2)
- Führerscheinentzug (2)
- Geländefahrzeug (2)
- Genauigkeit (2)
- Gesetzesübertretung (2)
- Government (national) (2)
- Greenhouse effect (2)
- Grenzwert (2)
- Haftung (jur) (2)
- Harmonisation (2)
- Hazard (2)
- Head restraint (2)
- Headlamp (2)
- Heavy metal (2)
- In service behavior (2)
- Incident detection (2)
- Incident management (2)
- Input data (2)
- Interface (2)
- Italien (2)
- Italy (2)
- Klimawandel (2)
- Knie (2)
- Kohlendioxid (2)
- Kontakt Reifen-Straße (2)
- Kontinuierlich (2)
- Kopfstütze (2)
- Kreuzung (2)
- Langfristig (2)
- Layout (2)
- Learning (2)
- Leuchtdichte (2)
- Liability (2)
- Limit (2)
- Long term (2)
- Luminance (2)
- Market (2)
- Markt (2)
- Medical examination (2)
- Mensch Maschine Verhältnis (2)
- Methode der finite Elemente (2)
- Mittelwert (2)
- Mobile phone (2)
- Mobiltelefon (2)
- Model (not math) (2)
- Modell (2)
- Motorisierungsgrad (2)
- Movement (2)
- Nacht (2)
- Near miss (2)
- Netherlands (2)
- Network (traffic) (2)
- Niederlande (2)
- Night (2)
- Oberfläche (2)
- Offence (2)
- Offender (2)
- Organization (association) (2)
- Output (2)
- Parken (2)
- Parking (2)
- Pavement Management System (2)
- Pavement design (2)
- Pavement management system (2)
- Penetration (2)
- Pollutant (2)
- Posture (2)
- Public transport (2)
- Radfahren (2)
- Radio (2)
- Radweg (2)
- Rain (2)
- Rear view mirror (2)
- Recidivist (2)
- Recording (2)
- Regen (2)
- Regierung (staat) (2)
- Reinforcement (in mater) (2)
- Restraint system (2)
- Risk taking (2)
- Run off (2)
- Rundfunk (2)
- Rückfalltäter (2)
- Rückspiegel (2)
- Schadstoff (2)
- Schall (2)
- Scheinwerfer (2)
- Schutz (2)
- Schwermetall (2)
- Seat belt (2)
- Service area (2)
- Service life (2)
- Side (2)
- Sociology (2)
- Sound (2)
- Soziologie (2)
- Sport utility vehicle (2)
- Spreading (2)
- Stadt (2)
- Statistical analysis (2)
- Statistische Analyse (2)
- Stochastic process (2)
- Stochastischer Prozess (2)
- Strain gauge (2)
- Straßenbau (2)
- Strength (mater) (2)
- Stress (psychol) (2)
- Störfallentdeckung (2)
- Störfallmanagement (2)
- Surface (2)
- Tank Rast Anlage (2)
- Telefon (2)
- Telekommunikation (2)
- Telephone (2)
- Three dimensional (2)
- Tiefe (2)
- Toxicity (2)
- Toxizität (2)
- Traffic lane (2)
- Traffic restraint (2)
- Treibhauseffekt (2)
- Turn (2)
- Turning (2)
- Tyre tread (2)
- Tätigkeitsbericht (2)
- Umweltschutz (2)
- Underride protection (2)
- Unfallopfer (2)
- Untersuchung am unfallort (2)
- Urban area (2)
- Vehicle ownership (2)
- Vehicle safety device (2)
- Verkehrsbeschränkung (2)
- Verkehrsnetz (2)
- Verkehrstechnik (2)
- Verkehrsverflechtung (2)
- Verständnis (2)
- Verteilung (mater) (2)
- Wasser (2)
- Water (2)
- Windscreen (veh) (2)
- Zeitreihe (stat) (2)
- Zusammendrückung (2)
- Zusammenstoss (2)
- Öffentlicher Verkehr (2)
- Überlappung (2)
- (menschl) (1)
- Abgefahrener Reifen (1)
- Ability (road user) (1)
- Abkommen von der Fahrbahn (1)
- Abnutzung (1)
- Acceleration (1)
- Acceptability (1)
- Accessibility (1)
- Accident black spot (1)
- Accident proneness (1)
- Accident severity (1)
- Achslast (1)
- Active safety (1)
- Active safety system; Automatic; Brake; Car; Collision avoidance system; Conference; Driver assistance system; Germany; Impact test (veh); Rear end collision; Severity (accid (1)
- Adaptation (psychol) (1)
- Adaptive cruise control (1)
- Adaptive cruise controll (1)
- Administration (1)
- Advanced vehicle control systems (1)
- Aged people (1)
- Aggression (psycho) (1)
- Aggression (psychol) (1)
- Air quality management (1)
- Air traffic control (1)
- Air transport (1)
- Airbag (restraint system) (1)
- Aktive Sicherheit (1)
- Alcolock (1)
- Alternative (1)
- Analyse (1)
- Analyses (math) (1)
- Anhänger (1)
- Ankündigung (1)
- Anordnung (1)
- Anpassung (psychol) (1)
- Anthropometrie (1)
- Anthropometry (1)
- Antiblockiersystem (1)
- Antikollisisonssystem (1)
- Apparatus (measurement) (1)
- Arbeitsgruppe (1)
- Arm (human) (1)
- Arm (menschl) (1)
- Articulated vehicle (1)
- Asset Management (1)
- Asset management (1)
- Asset management system (1)
- Atives Sicherheitssystem (1)
- Audit (1)
- Auffharunfall (1)
- Aufzeichnung (1)
- Aufzeichung (1)
- Augenbewegungen (1)
- Ausdehnung (mater) (1)
- Automotive Engineering (1)
- Autonomous emerhency braking (1)
- Autotür (1)
- Average (1)
- Axle load (1)
- Back (human) (1)
- Batterie (1)
- Baustelle (1)
- Baustoff (1)
- Bauweise (1)
- Beanspruchung (1)
- Bein [menschl] (1)
- Belohnung (Anreiz) (1)
- Bemessung des Straßenoberbaus (1)
- Benchmark (1)
- Bepflanzung (1)
- Berechnung d Straßenoberbaus (1)
- Beschleunigung (1)
- Bestrafung (1)
- Bevölkerung (1)
- Bewehrung (1)
- Bindemittel (1)
- Binder (1)
- Bitumen (1)
- Bituminous mixture (1)
- Bituminöses Mischgut (1)
- Black ice (1)
- Blind spot (veh) (1)
- Blood alcohol content (1)
- Blutalkoholgehalt (1)
- Bone (1)
- Brake light (1)
- Braking distance (1)
- Breaking (1)
- Breite (1)
- Bremslicht (1)
- Bridges (1)
- Budget (1)
- Bumper (1)
- Cadaver (1)
- Car door (1)
- Car park (1)
- Carriageway (1)
- Carriageway marking (1)
- Catalytic converter (1)
- Cervical vertebrae; Conference; Evaluation (assessment); Injury; Spinal column; Test (1)
- Chassis (1)
- Chest (1)
- Clay (1)
- Coefficient (1)
- Cognitive impairment (1)
- Cold (1)
- Collisison avoidance system (1)
- Colthing (1)
- Compatiblity (1)
- Computation (1)
- Concentration (chem) (1)
- Conference; Germany; Injury; Medical examination; Spinal column; X ray (1)
- Confiscation (driving licence) (1)
- Confiscation (driving license) (1)
- Congestion (traffic) (1)
- Construction method (1)
- Construction site (1)
- Consumer protection (1)
- Contact (tyre (1)
- Control (1)
- Cooling (mater) (1)
- Correlation (1)
- Correlation (math (1)
- Cracking (1)
- Critical path method (1)
- Crossing the road (pedestrian) (1)
- Damping (1)
- Data basis (1)
- Data collection (1)
- Datenübertragung (Telekom) (1)
- Dauer (1)
- Day (24 hour period) (1)
- Daylight (1)
- Decke [Straße] (1)
- Deformable barrier (Impact test) (1)
- Deformable barrier system (impact test) (1)
- Deformierte Barriere (Anpralltest) (1)
- Demand (econ) (1)
- Demografie (1)
- Demography (1)
- Density (1)
- Detection response task (1)
- Deutschland ; Konferenz (1)
- Diagnostik (1)
- Dichte (1)
- Dieselmotor (1)
- Diffusion (1)
- Digital computer (1)
- Digitalrechner (1)
- Dimension (1)
- Dispersion (stat) (1)
- Displacement (1)
- Disstraction (1)
- Distribution (gen) (1)
- Drainage (1)
- Driver (veh) (1)
- Driver information system (1)
- Driving aid (electronic) (1)
- Dränasphalt (1)
- Dtetection (1)
- Durchsichtigkeit (1)
- Dynamic penetration test (1)
- Dynamo (1)
- Dämpfung (1)
- Earthworks (1)
- Economic efficiency (1)
- Economics of transport (1)
- Ejection (1)
- Elastizitätsmodul (1)
- Electronics (1)
- Elektronik (1)
- Elektronische Deichsel (1)
- Elektronisches Stabilitätsprogram (1)
- Emergency medical aid (1)
- Engine capacity (1)
- Enteisung (1)
- Entgleisung (Zug) (1)
- Entwässerung (1)
- Erdarbeiten (1)
- Erfahrung (menschl) (1)
- Ermüdung (mater) (1)
- Ersatzfahraufgabe (1)
- European New Car Assessment Programme (1)
- Evaluation (Assessment) (1)
- Event data recorder (Road vehicle) (1)
- Expansion (1)
- Experimental road (1)
- Expert interview (1)
- Expressway (1)
- Eye movement (1)
- Face (human) (1)
- Facility (1)
- Fahrassistenzsystem (1)
- Fahrbahn (1)
- Fahrdynamik (1)
- Fahrererfahrung (1)
- Fahrerinformationen (1)
- Fahrerinformationssystem (1)
- Fahrleistung (1)
- Fahrstreifenwechsel (1)
- Fahrwerk (1)
- Fahrzeugbeleuchtung (1)
- Fahrzeugdach (1)
- Fahrzeugflotte (1)
- Fahrzeugrückhaltesystem (1)
- Fahrzeugsicherheit (1)
- Failure (1)
- Fatigue (human) (1)
- Fatigue (mater) (1)
- Fear (1)
- Fein (mater) (1)
- Feinstaub (1)
- Fence (1)
- Fernverkehrsstrasse (1)
- Field test (1)
- Financing (1)
- Finanzierung (1)
- Fine (mater) (1)
- Finland (1)
- Finnland (1)
- Fleet of vehicles (1)
- Flexible pavement (1)
- Flooding (1)
- Flugsicherung (1)
- Freeway (1)
- Freight transport (1)
- Friction (1)
- Fuel tank (1)
- Fuge (1)
- Fugenfüllung (1)
- Functional safety (1)
- Funktionale Sicherheit (1)
- Furcht (1)
- Future transport mode (1)
- Fußgängerbereich (1)
- Führerschein Punktesystem (1)
- Gap acceptance (1)
- Gas (1)
- Gefahr (1)
- Gelenkfahrzeug (1)
- Geografisches Information System (1)
- Geographical information system (1)
- Geomembran (1)
- Geomembrane (1)
- Geometry (shape) (1)
- Geotextil (1)
- Geotextile (1)
- Geradeausverkehr (1)
- Geschwindigkeitsbeschränkung (1)
- Gesicht (1)
- Gestaltung (1)
- Gesundheit (1)
- Glatteis (1)
- Great Britain (1)
- Grenzfläche (1)
- Ground water (1)
- Group analysis (test) (1)
- Großbritannien (1)
- Grundwasser (1)
- Güterverkehr (1)
- Harmonisierung (1)
- Harmonization (1)
- Head (human) (1)
- Health (1)
- Hearing (1)
- Height (1)
- Herausschleudern (1)
- Herstellung (1)
- Higway design (1)
- Hip (human) (1)
- Homogeneity (1)
- Homogenität (1)
- Hospitsl (1)
- Hubraum (1)
- Häufigkeit (1)
- Höhe (1)
- Hörvermögen (1)
- Hüfte (1)
- Hüfte (menschl) (1)
- Illness (1)
- Image analysis (1)
- Image generation (1)
- Image processing (1)
- Immission (1)
- Impact (collision) (1)
- Impact test (crash) (1)
- In Bewegung (1)
- Increase (1)
- Inertia reel safety belt (1)
- Infotainment System (1)
- Infotainment system (1)
- Injury) (1)
- Installation (1)
- Intelligentes Transport System (1)
- Intelligentes Verkehrssystem (1)
- Interactive model (1)
- Interaktives Modell (1)
- Inventar (1)
- Inventory (1)
- Ireland (1)
- Irland (1)
- Itinerary (1)
- Jahr (1)
- Joint (structural) (1)
- Klassifikation (1)
- Kleintransporter (1)
- Knochen (1)
- Koeffizient (1)
- Kognitive Aufgabenanforderung (1)
- Kognitive Beeinträchtigung (1)
- Kolmatierung (1)
- Kompatiblität (1)
- Konzentration (1)
- Kopf (menschl) (1)
- Korea (Süd) (1)
- Korn (1)
- Kornverteilung (1)
- Korrelation (math (1)
- Korrelation [math (1)
- Korrelation(Math (1)
- Kosten Nutzen Vergleich (1)
- Kraftstofftank (1)
- Kraftstoffverbrauch (1)
- Krankheit (1)
- Kreisverkehrsplatz (1)
- Kälte (1)
- Körperhaltung (1)
- Körperstellung (1)
- Kühlung (mater) (1)
- Laboratorium (1)
- Laboratory (not an organization) (1)
- Laborexperiment (1)
- Lane changing (1)
- Lap strap (1)
- Laser (1)
- Lateral (1)
- Lateral collision (1)
- Layer (1)
- Lebensdauer (1)
- Left turn (1)
- Leichnam (1)
- Leistungsfähigkeit (Allg.) (1)
- Length (1)
- Lernen (1)
- Lifecycle (1)
- Links (1)
- Literaturanalyse (1)
- Literature review (1)
- Luftreinhaltung (1)
- Lufttransport (1)
- Länge (1)
- Lärmschutzwand (1)
- Maintenance management (1)
- Malaysia (1)
- Man-machine interface (1)
- Manufacture (1)
- Massenunfall (1)
- Material (constr) (1)
- Materialveraenderung (allg) (1)
- Materialveränderung (allg) (1)
- Mathematical Model (1)
- Matrix (1)
- Mean (math) (1)
- Mensch-Maschine-Interaktion (1)
- Mensch-Maschine-Schnittstelle (1)
- Merging (1)
- Merging traffic (1)
- Text (1)
- Mesurement (1)
- Metal bridge (1)
- Mix design (1)
- Modulus of elasticity (1)
- Montage (1)
- Moped (1)
- Motor (1)
- Moving (1)
- Multiple collision (1)
- Müdigkeit (1)
- Nachfrage (1)
- Nachhaltige Entwicklung (1)
- Nachhaltigkeit (1)
- Nachricht (1)
- Nasse Strasse (1)
- Netzplantechnik (1)
- Neural network (1)
- Neuronales Netz (1)
- Nigeria (1)
- Nitric acid (1)
- Nitrogen oxide (1)
- Noise barrier (1)
- Non destructive testing (1)
- Nordamerika (1)
- North America (1)
- Norway (1)
- Norwegen (1)
- Nummer (1)
- Nutzwertanalyse (1)
- OECD (1)
- Occupant (1)
- Offset impact test (1)
- On the left (1)
- On the right (1)
- On the scene accident investigation (1)
- On the spot investigation (1)
- Optimum (1)
- Optische Anzeige (1)
- Organization (1)
- Orthotrope Platte (1)
- Orthotropic plate (1)
- Overtaking (1)
- Overturning (1)
- Oxygen (1)
- Ozon (1)
- Ozone (1)
- PVC (1)
- Padding (safety) (1)
- Parkfläche (1)
- Particle (1)
- Particle size distribution (1)
- Particulate matter (1)
- Partnerschaft (1)
- Partnership (1)
- Peak hour (1)
- Peat (1)
- Pedestrian precinct (1)
- Pelvis (1)
- Penalty (1)
- Personal (1)
- Personnel (1)
- Pfahl (1)
- Pfosten (1)
- Pile (1)
- Platooning (electronic) (1)
- Platte (1)
- Point demerit system (1)
- Poland (1)
- Pole (1)
- Polen (1)
- Police (1)
- Politics (1)
- Polizei (1)
- Pollution (1)
- Pollution concentration (1)
- Polyvinylchloride (1)
- Population (1)
- Porous asphalt (1)
- Portable (1)
- Position (1)
- Pregnancy (1)
- Preloading (soil) (1)
- Prestressed (1)
- Prestressed concrete (1)
- Probe (1)
- Productivity (1)
- Protective helmet (1)
- Provisorisch (1)
- Prüefverfahren (1)
- Pssives Sicherheitssystem (1)
- Psychological aspects (1)
- Psychologische Gesichtspunkte (1)
- QAccident (1)
- Quality management system (1)
- Qualitätsmanagementsystem (1)
- Rail bound transport (1)
- Rail traffic (1)
- Rammsondierung (1)
- Reaction (chem.) (1)
- Reaktion (chem) (1)
- Real-time (1)
- Rechts (1)
- Rechtsübertreter (1)
- Rechtübertreter (1)
- Reconstruction [accid] (1)
- Reduction (decrease) (1)
- Reflectivity (1)
- Reflectorized material (1)
- Reflexionsgrad (1)
- Reflexstoffe (1)
- Regional planning (1)
- Regionalplanung (1)
- Rehabilitation (Road user) (1)
- Reibung (1)
- Reifenprofil (1)
- Reinforcement (1)
- Reiseweg (1)
- Republic of Corea (1)
- Research (1)
- Research projekt (1)
- Residential area (1)
- Resilience (1)
- Resilienz (1)
- Resuscitation (1)
- Reversing (veh) (1)
- Reward (1)
- Rib (1)
- Richtlinie (1)
- Rinanalyse (1)
- Rippe (menschl) (1)
- Risikoverhalten (1)
- Rissbildung (1)
- Road (1)
- Road Construction (1)
- Road construction site (1)
- Road heating (1)
- Road marking (1)
- Road transport (1)
- Roadbase (1)
- Roadside (1)
- Robot (1)
- Roboter (1)
- Roll over (veh) (1)
- Rolling resistance (1)
- Rollwiderstand (1)
- Roof (veh) (1)
- Rotation (1)
- Roundabout (1)
- Rsk (1)
- Rupture (1)
- Röntgenstrahlung (1)
- Rücken (1)
- Rücksichtslosigkeit (1)
- Rückwärtsfahren (1)
- SAE Level (1)
- Safety glass (1)
- Safety harness (1)
- Safety system (1)
- Saftey (1)
- Salpetersäure (1)
- Sample (mater) (1)
- Sample (stat) (1)
- Sauerstoff (1)
- Schicht (1)
- Schienentransport (1)
- Schienenverkehr (1)
- Schleudertrauma (1)
- Schnittstelle (1)
- Schulter (1)
- Schwangerschaft (1)
- Schweiz (1)
- Schweregrad (UNfall (1)
- Schweregrad (Unfall, Verletzung (1)
- Schweregrad /Unfall (1)
- Schätzung (1)
- Sealing compound (1)
- Seat (1)
- Seat harness (1)
- Sensors (1)
- Settlement (1)
- Setzung (1)
- Severity (accid, injuy) (1)
- Shape (1)
- Shoulder (human) (1)
- Sicherheitsglas (1)
- Sicherheitspolsterung (1)
- Significance (1)
- Signifikanz (1)
- Silting (1)
- Size and weight regulations (1)
- Slab (1)
- Social factors (1)
- Soziale Faktoren (1)
- Spannbeton (1)
- Specification (standard ) (1)
- Spectrum (1)
- Speed limit (1)
- Speed) (1)
- Spektrum (1)
- Spinal calum (1)
- Sri Lanka (1)
- Stadardization (1)
- Stadtplanung (1)
- Staggered junction (1)
- Stahl (1)
- Stahlbrücke (1)
- Stand der Technik (Bericht) (1)
- Standard (1)
- Standard test run (1)
- Standardabweichung (1)
- Stapedius reflex (1)
- Stapediusreflex (1)
- Stat) (1)
- State of the art report (1)
- Statistik (math) (1)
- Steel (1)
- Stichprobe (1)
- Stickoxid (1)
- Stopping distance (1)
- Stoßstange (1)
- Straight ahead (traffic) (1)
- Strasse (1)
- Straßenheizung (1)
- Straßenseitenfläche (1)
- Straßentransport (1)
- Strength ; Tension (1)
- Stress (1)
- Stress (psycho) (1)
- Subsoil (1)
- Surrogate driving set-up (1)
- Switzerland (1)
- Systemanalyse (1)
- Systems analysis (1)
- Tactile perception (1)
- Tag (24 Stunden) (1)
- Tageslicht (1)
- Taktiles Signal (1)
- Technische Vorschriften (1)
- Telecommunication (1)
- Telecomunication (1)
- Temperature measurement (1)
- Temperaturmessung (1)
- Temporary (1)
- Tension (1)
- Terrorism (1)
- Terrorismus (1)
- Test procedure (1)
- Thailand (1)
- Ton (Gestein) (1)
- Torf (1)
- Toter Winkel (1)
- Town planning (1)
- Tracking task (1)
- Trackingaufgabe (1)
- Traffic Engineering (1)
- Traffic concentration (1)
- Traffic regulation (1)
- Tragbar (1)
- Tragschicht (1)
- Train (1)
- Transparent (1)
- Transport (1)
- Transport mode (1)
- Transport operator (1)
- Transportunternehmen (1)
- Traveler (1)
- Two dimensional (1)
- Typenzulassung (1)
- Underride prevention (1)
- Unfallfolgephase (1)
- Unfallneigung (1)
- Unfallrate (1)
- Unfallrekonsruktion (1)
- Unfallschwerpunkt (1)
- Unfallverhuetung (1)
- Unfallverhütug (1)
- Ungeschützter Verkehrsteilnehmer (1)
- United Kindom (1)
- Untergrund (1)
- Untersuchung am Umfallort (1)
- Usa (1)
- Value analysis (1)
- Variable message signs (1)
- Variance analysis (1)
- Varianzanalyse (1)
- Vegetation (1)
- Vehicle lighting (1)
- Vehicle mile (1)
- Vehicle regulation (1)
- Vehicle restraint system (1)
- Vehicle safety (1)
- Veletzung) (1)
- Veraenderung (1)
- Verbraucherschutz (1)
- Vereinigtes Königreichl (1)
- Verfahen (1)
- Verfahren ; Verkehrsinfrastruktur (1)
- Vergrößerung (1)
- Verkehrsmittel (1)
- Verkehrsspitze (1)
- Verkehrsstauung (1)
- Verkehrsstärke (1)
- Verkehrswirtschaft (1)
- Vermeidung (1)
- Verschmutzung (1)
- Versetzte Kreuzung (1)
- Verstärkung (1)
- Verstärkung (Brücke) (1)
- Versuchsstrecke (1)
- Verteilung (allg) (1)
- Verwaltung (1)
- Vibration (1)
- Video camera (1)
- Virtual reality (1)
- Virtuelle Realität (1)
- Viskosity (1)
- Viskosität (1)
- Visualisation (1)
- Visualisierung (1)
- Vorbelastung (Boden) (1)
- Vorspannung (1)
- Vulnerable road user (1)
- Warning (1)
- Wear (1)
- Wechselverkehrszeichen (1)
- Wetter (1)
- Whiplash injury (1)
- Width (1)
- Wind (1)
- Window (veh) (1)
- Winter (1)
- Wirkungsanalyse (1)
- Wirtschaftlichkeit (1)
- Wohngebiet (1)
- Women (1)
- Working group (1)
- Year (1)
- Zahl (1)
- Zeitlückenakzeptanz (1)
- Zerstörungsfreie Prüfung (1)
- Zug (Eisenbahn) (1)
- Zug (mech) (1)
- Zugänglichkeit (1)
- Zukünftiges Verkehrsmittel (1)
- Zulassung (tech) (1)
- Zusammensetzung (1)
- ZusammenstoÃüï-¿-½Ãƒ-¯Ã‚-¿Ã‚-½ (1)
- Zweidimensional (1)
- accident (1)
- aktives Sicherheitssystem (1)
- analyses (math) (1)
- ar (1)
- driving dynamics (1)
- efficiency (1)
- fatality (1)
- finite element method (1)
- head (1)
- human-machine interaction (1)
- road) (1)
- simulation (1)
- stat) (1)
- stat] (1)
- trailer (1)
- tödlicher Unfall (1)
- vehicle safety (1)
- Überdeckung (1)
- Überholen (1)
- Überschwemmung (1)
Institut
- Sonstige (337)
- Abteilung Fahrzeugtechnik (126)
- Abteilung Verhalten und Sicherheit im Verkehr (23)
- Abteilung Brücken- und Ingenieurbau (22)
- Abteilung Straßenverkehrstechnik (22)
- Abteilung Straßenbautechnik (17)
- Präsident (9)
- Stabstelle Presse und Öffentlichkeitsarbeit (6)
- Stabstelle Forschungscontrolling, Qualitätsmanagement (1)
Driver distraction
(2017)
This report for the Institute of Advanced Motorists (IAM) summarises recent research and knowledge from scientific studies about distracted driving. The report defines what it means to be "distracted" when driving, discusses the impact of distraction on driver behaviour and safety, and what can be done to reduce distracted driving. The focus of distraction discussed here relates to how drivers engage with technology when driving. The report begins with a background to driver distraction, followed by discussion about what is actually meant by driver distraction. It is then considered why humans cannot successfully do two things at the same time, particularly within the context of driving. The subsequent section summarises the scientific research findings to date with regard to driver distraction and technology, and how this affects different types of road user. Recommendations for how driver distraction can be mitigated in the real world and a summary conclude the report. Responses to common questions raised by drivers are presented in Appendix A.
Immediate user self-evacuation is crucial in case of fire in road tunnels. This study investigated the effects of information with or without additional virtual reality (VR) behavioural training on self-evacuation during a simulated emergency situation in a road tunnel. Forty-three participants were randomly assigned to three groups with accumulating preventive training: The control group only filled in questionnaires, the informed group additionally read an information brochure on tunnel safety, and the VR training group received an additional behavioural training in a VR tunnel scenario. One week later, during the test session, all participants conducted a drive through a real road tunnel in which they were confronted with a collision of two vehicles and intense smoke. The informed and the behaviourally trained participants evacuated themselves more reliably from the tunnel than participants of the control group. Trained participants showed better and faster behavioural responses than informed only participants. Interestingly, the few participants in the control group who reacted adequately to the scenario were all female. A 1 year follow-up online questionnaire showed a decrease of safety knowledge, but still the trained group had somewhat more safety relevant knowledge than the two other groups. Information and especially VR behavioural training both seem promising to foster adequate self-evacuation during crisis situations in tunnels, although long term beneficial behavioural effects have to be demonstrated. Measures aiming to improve users/ behaviour should take individual difference such as gender into account.
Improving the security of critical road infrastructure is a major task for owners and operators of tunnels and bridges in the European TEN-T Network (Trans-European Networks of Transport) (European Parliament and Council 1996). Up to now, there has not been a systematic procedure for identifying and assessing critical infrastructure objects and selecting appropriate protection measures. The EC FP7 project SeRoN for the first time presents an innovative methodology in order to support road owners and operators in handling this complex task. This paper describes the methodology and project results in detail by giving an introduction into its practical application.
Efficient and widely available transport infrastructure is one of the most important prerequisites for sustainable economic development to meet the demand for mobility. In this context, being able to manage traffic growth forecasts is of particular importance. In Germany, current forecasts indicate a 40% increase in rail and road transport in the country. However, about 60% of bridges (as measured by bridge area) on the national German highway system that are suitable for freight transport were built before 1985. In other transport sectors as well, aging infrastructure is one of the key challenges for the availability and the resilience of European transport infrastructure. Many bridges in the national German highway system are already at their load-bearing limit. Furthermore, required maintenance measures have not been adequately carried out in the past due to limited budgets, leading to overall bridge deterioration. Further challenges for owners and operators of transport infrastructure result from the effects of climate change, associated climate extremes, natural catastrophes, and possible criminal and terrorist threats. To ensure that future infrastructure challenges can be successfully addressed, strategies and solutions must be developed and implemented in a timely manner to enable holistic and sustainable life-cycle management. The concepts of Resilience Management as well as Resilience Engineering are essential building blocks in this process. Resilience is the ability to survive in the face of a complex, uncertain, and ever-changing future. It is a way of thinking about both short-term cycles and long-term trends. Using this concept, owners and operators can reduce the risk of disruption in the face of shocks and stresses. Resilience requires cyclical, proactive, and holistic risk management practices.
This paper deals with the determination of test criteria for the durability assessment of polyvinyl chloride (PVC)-based geosynthetic barriers (GBR-P) products in tunnel sealing systems. In the project different products for road tunnel application are investigated by systematic long time storage in hot water using a new test procedure based on SIA V 280 standard (test no. 13) and EN 14415. The objective of this research project is to derive suitable exposure conditions and criteria for a practical testing procedure with regard to service lifetimes of up to 100 years. For that test temperature and time as well as the best suitable test medium have been investigated in a structured way. To verify the results of the new test procedure the material properties of GBR-P samples removed from older road tunnels are investigated. Based on the presented results of the still on-going research program some preliminary conclusions regarding the updating of the German regulations for road tunnel sealing systems (ZTV-ING part 5 section 5 and TL/TP KDB) are given.
This paper deals with possibilities to update existing road tunnels in order to fulfill up to date requirements regarding structural fire protection. Besides the upgrading of tunnels with structural fire protection systems (like e.g. fire protection sheets) there is also the possibility of numerical investigations. In research projects carried out on behalf of the Federal Highway Research Institute (BASt) numerical investigations for the proof of sufficient structural fire protection have been done for common road tunnel types. Additionally the influence of different fire loads and fire durations on the bearing capacity of the structures have been investigate existing tunnels regarding structural fire protection. The research results have also been the basis for a current update of national standards for tunnel construction.
The first stage of the work has been to collate information on bridge assessment from the participating countries. In the later stages, the aim is to provide guidelines that reflect the current best practices, a methodology that will allow for future development and sufficient flexibility to accommodate variations in national priorities as the process of harmonisation is pursued. The following tasks fall within the scope of the project: (1) a review of current procedures and standards used for bridge assessment in Europe; (2) the development of models for taking into account the bridge specific traffic conditions and material properties; (3) the use of reliability methods based on a probabilistic approach for bridge assessment including the use of measurements for updating the reliability of structural elements; and (4) the provision of recommendations for methods and procedures that can be adopted for the assessment module of the management framework highlighting where further development will be beneficial.
In the project SECMAN " SECurity MANual " a simple four-step procedure for the identification of critical road infrastructures, assessment of these infrastructures regarding various man-made threats and the determination of effective protection measures was developed. These methodologies are summarized and combined into a comprehensive best-practice manual which allows for a trans-national structured and holistic security-risk-management approach for owners and operators of road infrastructures in Europe. This paper presents the developed methodology starting from the assessment procedures of a network's criticality over an object's attractiveness and vulnerability to the selection process of appropriate protection measures.
Despite the steadily declining number of pedestrian fatalities and injuries in most European countries during recent decades, pedestrian protection is still of great importance in the European Union as well as in Germany. This is because they still constitute a large proportion of road user casualties and are more likely to suffer serious and fatal injuries than most other road users. In 1999 only car occupants suffered more fatal injuries than pedestrians in Germany. In December 1998, EEVC WG 17 completed their review and updating of the EEVC WG 10 pedestrian test procedure that made it possible to evaluate the protection afforded to pedestrians by the front of passenger cars in an accident. Within the scope of this procedure, four different impactors are used representing those parts of the body which are injured very often and/or very seriously in vehicle-pedestrian-collisions. In a project executed by IKA and BASt, a small family car was tested according to the EEVC WG 17 test procedure. Afterwards modifications to the car were carried out in order to improve the pedestrian protection provided by the vehicle design. There were certain restrictions placed on the level of modifications undertaken, e.g. only minor modifications to vehicle styling and to the vehicle structures, which provide passenger protection. The redesigned vehicle was tested again using the WG 17 test procedure. The test results of the modified vehicle were compared with those of the standard vehicle and evaluated. The results show that considered measures for pedestrian protection in many areas of the vehicle front structure and the use of innovative techniques can lead to a significant reduction of the loads of pedestrians at an acceptable expense.
Many big cities in Europe and elsewhere in the world have problems managing the traffic especially during rush hours. The improvement of the parking problematic and environmental protection as well are important aspects for the future traffic design of urban areas. To improve the traffic situation the development of new traffic concepts and alternative vehicles are required. The BMW company has developed a new type of two-wheel vehicle. This two-wheeler constitutes a totally new concept. BMW implemented a lot of safety features, such as a structure made up of rollover bars and a crush element instead of a front protecting plate. Furthermore the driver can secure himself with two safety belts. The paper contains a description of the novel two-wheel vehicle concept designed so far. BMW's concept and the safety features are also explained. The Federal Highway Research Institute (BASt) was given the task of assessing the concept as a whole with regard to the active and passive safety and the exemption of the obligation to wear a helmet. The expertise concluded that the BMW two-wheeler concept has a very high safety standard. Some extracts of the expertise, in particular the investigations concerning the exemption of the obligation to wear a helmet are presented. Common legal requirements for the vehicle registration of vehicle concepts similar to the BMW two-wheeler in Germany have been formulated.
As the official German catalogue of accident causes has difficulty in matching the increasing demands for detailed psychologically relevant accident causation information, a new system, based on a "7 Steps" model, so called ACASS, for analyzing and collecting causation factors of traffic accidents, was implemented in GIDAS in the year 2008. A hierarchical system was developed, which describes the human causation factors in a chronological sequence (from the perception to concrete action errors), considering the logical sequence of basic human functions when reacting to a request for reaction. With the help of this system the human errors of accident participants can be adequately described, as the causes of each range of basic human functions may be divided into their characteristics (influence criteria) and further into specific indicators of these characteristics (e.g. distraction from inside the vehicle as a characteristic of an observation-error and the operation of devices as an indication for distraction from inside the vehicle. The causation factors accordingly classified can be recorded in an economic way as a number is assigned to each basic function, to each characteristic of that basic function and to each indicator of that characteristic. Thus each causation factor can be explicitly described by means of a code of numbers. In a similar way the causation factors based on the technology of the vehicle and the driving environment, which are also subdivided in an equally hierarchical system, can be tagged with a code. Since the causes of traffic accidents can consist of a variety of factors from different ranges and categories, it is possible to tag each accident participant with several causation factors. This also opens the possibility to not only assign causation factors to the accident causer in the sense of the law, but also to other participants involved in the accident, who may have contributed to the development of the accident. The hierarchical layout of the system and the collection of the causation factors with numerical codes allow for the possibility to code information on accident causes even if the causation factor is not known to its full extent or in full detail, given the possibility to code only those cause factors, which are known. Derived from the systematic of the analysis of human accident causes ("7 steps") and from the practical experiences of on-scene interviews of accident participants, a system was set in place, which offers the possibility to extensively record not only human causation factors in a structured form. Furthermore, the analysis of the human causation factors in such a structured way provides a tool, especially for on-scene accident investigations, to conduct the interview of accident participants effectively and in a structured way.
With an ever rising human life expectancy the share of elderly people in society is constantly rising. This leads to the fact that at the same rate the share of people with age related diseases such as dementia and poor eyesight taking part in traffic will rise and therefore traffic accidents caused by this group of people due to the disease will play an ever greater role. This Situation will be among the future challenges of road safety work. At present this study displays specific characteristics of accidents caused by elderly car drivers (aged 65 or higher) based on the analysis of the German In-Depth Accident Study GIDAS. Herein almost 1000 elderly car drivers were identified as accident participants in the years 2008 to 2011. The focus of this study lies on identifying special types of accidents which are caused by elderly drivers and on characterizing these types with the information gathered on scene and by interviewing the participants. The main evidence analyzed is the knowledge about the accident locality, the trajectories of the participants as well as the reasons for the occurrence of the accidents. Furthermore personal information such as the personal condition before the accident and driving purposes is used to identify patterns of contributing circumstances for accidents caused by elderly traffic participants.
In the context of this study, different data sources for accident research were examined regarding their possible data access and evaluated concerning the individual quality and extent of the data. Analyses of accidents require detailed and comprehensive information in particular concerning vehicle damages, injury patterns and descriptions of the accident sequence. The police documentation supplies the basic accident statistics and is amended in the context of the forensic treatment by further information, e.g. by medical and technical appraisals and witness questionings. As a new approach to the data acquisition for the analysis of fatal traffic accidents, the information was made usable which was collected by the police and by the investigations of the public prosecutor. The best strategy for obtaining reliable, extensive and complete data consists of combining the information from these two sources: the very complete, but elementary statistic data of the Niedersächsisches Landesamt für Statistik (Lower Saxony State Authority of Statistics), based on the police documentation as well as the very extensive accident information resulting from the investigation documentation of the public prosecutor after conclusion of the procedure, the so-called Court Records. Of all 715 fatal traffic accidents, which happened in the year 2003 in the German State of Lower Saxony, 238 cases were selected by means of a statistically coincidental selective procedure based on a statistically representative manner (every third accident). These cases cover the investigation documents of the 11 responsible public prosecutor- offices, which were requested and evaluated while preserving the data security. Of the 238 cases 202 cases were available, which were individually coded and stored in a data base using 160 variables. Thus a data base of a sample of representative data for fatal accidents in Lower Saxony was set up. The data base contains extensive information concerning general accident data (35 variables), concerning road and road surface data (30 variables), concerning vehicle-specific data (68 variables) as well as concerning personal and injury data (27 variables).
Within the COST Action TU1101 the working group WG 1 is dealing with acceptance criteria and problems in helmet use while bicycling concerning conspicuity, thermal stress, ventilation deficits and other potential confounding. To analyze the helmet usage practice of bicyclists in Europe a questionnaire was developed in the scope of working group 1 to collect relevant information by means of a field study. The questionnaire consists of some 66 questions covering the fields of personal data of the cyclist, riding und helmet usage habits, information concerning the helmet model and the sensation of the helmet, as well as information on previous bicycle accidents. A second complementary study is conducted to analyze if the use of a bicycle helmet influences the seating geometry and the posture of cyclists when riding a bicycle and if the if the helmet vertically limits the vision. For this purpose cyclists with and without helmets were photographed in real world situations and relevant geometrical values such as the decline of the torso, the head posture of the upper vertical vision limit due to the helmet were established from the photos. The interim results of the field studies which were conducted in Germany by the Hannover Medical School are presented in this study. Some 227 questionnaires were filled out, of which 67 participants had used a helmet and 42 of the 227 participants have had a bicycle accident before. For the analysis of the riding position and posture of the cyclist over 40 pictures of riders with a helmet and over 240 pictures of riders without a helmet were measured concerning the seating geometry to describe the influence of using a bicycle helmet. Some results in summary: From the riders interviewed with the questionnaire only 11% of the city bike riders and 12% of the mountain bike riders always used the helmet, while 38% of the racing bike riders and 88% of the e-bike-riders always used the helmet. The helmet use seems not to change the sensation of safety of cycling compared to the use of a car. The arguments for not wearing a helmet are mostly stated to be the short distance of a trip, high temperatures or carelessness and waste of time. The reasons for using a helmet are stated to be the feeling of safety and being used to using a helmet. Being a role model for others was also stated to be a reason for helmet use. Concerning the sensation of the helmet 9% of the riders reported problems with the field of vision when using a helmet, 57% saw the problem of sweating too much, and 10% reported headaches or other unpleasant symptoms like pressure on the forehead when using the helmet. The analysis of the seating posture from the pictures taken of cyclists revealed that older cyclists generally have a riding position where the handle bar is higher than the seat (0-° to 10-° incline from seat to handlebar), while younger riders had a higher variance (between -10-° decline and 20-° incline). Further, elderly riders and riders with helmets seem to have a more upright position of the upper body when cycling. The vertical vision limit due to the helmet is determined by the front rim of the helmet (mostly the sun shade). Typical values here range from 0-° (horizontal line from the eye to the sun shade) to 75-° upwards, in which elderly riders tend to have a slightly higher vertical vision limit possibly due to the helmet being worn more towards the face.
Although the statistics show a decreasing rate of child injuries and fatalities in German road accidents more efforts can be made to protect children in cars e.g. by developing appropriate child restraint systems. An important part in of this work can be achieved with the help of crash tests using child dummies. However these crash tests cannot completely reflect the situation of real world crashes as factors like children moving out of the optimal position or children incorrectly fastened by their parents are difficult to predict. Therefore this study gives an overview over the current accident and injury situation of child occupants in cars in German road accidents.
Rural roads (highways) in Germany have to provide both high road safety and an appropriate level of service in accordance with their function in the road network. Single carriageway rural roads often underperform these expectations. An analysis of severe accidents on rural roads found two main contributing factors. First, high or inappropriate speed leads to accidents caused by the loss of control of the vehicle. Second, unsafe passing manoeuvres related to a misjudgement of sight distance, speed of oncoming vehicles or a misjudgement of the driver vehicle's acceleration capability. On the five roads where unsafe passing manoeuvres were a main contributing factor to accident occurrence, single short passing lanes (600 m to 1.2 km) were built to provide safe passing. On the remaining two-lane sections passing was prohibited by road signs and road marking. This paper investigates the effect of this design change on the accident situation and on traffic flow. The research project is based on a before/after comparison of traffic and accident data. Traffic volume, vehicle types and their velocities as well as the time gaps between the vehicles were recorded at different cross-sections. The result shows a significant improvement in road safety. This improvement was especially noted for severe head-on crashes, which were reduced to almost zero. The analysis of traffic flow on these roads pointed out that the chosen lengths of passing lanes were sufficient for safe passing and thereby reduced the need for dangerous driving behaviour. The recommendations of this research were fundamental for the determination of the design parameters of the second highest design class (EKL 2) in the new German Rural Road Design Guideline (RAL) published in spring 2013.
An increased use of bicycles comes along with an increased number of bicycle accidents. Bicycle accidents are more frequent than recorded by the police. To evaluate the real number of bicycle accidents during 12 months in Münster, Germany, injuries were collected by the Police and in each emergency unit anonymously. 2,153 patients had to be treated in a hospital, nearly triple the number of accidents that were registered by the police. Beside fractures of the upper extremities with major surgery, traumatic brain injuries were the leading cause for hospital admission. Bicycle helmet use can reduce traumatic brain injuries and the related number of deaths and hospital admissions. Laws on bicycle helmet might decrease the use of bicycles and therefore the reduction of positive health benefits. Other methods of accident prevention may lead to positive effects as helmet legislation as well, while having no reduction in bicycle use.
As bearing capacity measurements become more and more important, the necessity of assuring quality by establishing a QA system becomes more relevant. Within this context, the FGSV recommends the introduction of comparative measurements. Since 2015, two pilot events took place, with the main aim of introducing repetitive comparative measurements, in which all FWD operators shall participate. The results of the comparative measurements show that the basic principles behind comparative measurements (of the FWD), elaborated as a Europe-wide consensus and put into practice in the Netherlands and the United Kingdom, are valid, but still there is a variety of questions to be answered concerning certain details of the measuring system itself, e. g. measurement of the temperatures (air, pavement) and the impact of load introduction. All in all, the two pilot events in 2015 and 2016 proved that the comparability of the different FWD measuring devices is satisfactory.
Within the process of integrating passenger airbags in the vehicle fleet a problem of compatibility between the passenger airbag and rear-facing child restraint systems was recognised. Especially in the US several accidents with children killed by the passenger airbag were recorded. Taking into account these accidents the deactivation of a present passenger airbag is mandatory if a child is carried in a rear-facing child restraint system at the front passenger seat in all member states of the European Union. This rule is in force since the deadline of 2003/20/EC at the latest. In the past a passenger airbag either could not be disabled or could only be disabled by a garage. Today there are a lot of different possibilities for the car driver himself to disable the airbag. Solutions like an on/off-switch or the automatic detection of a child restraint system are mentioned as an example. Taking into account the need for the deactivation of front passenger airbags two types of misuse can occur: transportation of an infant while the airbag is (still) enabled and transportation of an adult, while the airbag is disabled, respectively. Within a research project funded by BASt both options of misuse were analysed utilising two different types of surveys amongst users (field observations and interviews, Internet-questionnaires). In addition both analysis of accident data and crash tests for an updated assessment of the injury risk caused by the front passenger airbag were conducted. Both surveys indicate a low risk of misuse. Most of the misuse cases were observed in older cars, which offer no easy way to disable the airbag. For systems, which detect a child seat automatically, no misuse could be found. The majority of misuses in cars equipped with a manual switch were caused by reasons of oblivion. Also the accident analysis indicates a minor risk of misuse. From more than 300 cases of the GIDAS accident sample that were analysed, only 24 children were using the front passenger seat in cars equipped with a front passenger airbag. In most of these cases the airbag was deactivated. When misuse occurred the injury severity was low. However, when analysing German single accidents the fatality risk caused by the front passenger airbag became obvious. From the technical point of view, there were important changes in the design of passenger airbags in recent years. Not only volume and shape were modified, but also the mounting position of the entire airbag module was changed fundamentally. Even if these findings do not allow obtaining general conclusions, a clear tendency of less danger by airbags could be identified. For future vehicle development a safe combination of airbags and rear faced baby seats seems to be possible in the long term. This would mean that both types of misuse could be eliminated. For parents an easier use of child seat and car would be the result.
The share of high-tensile steel in car bodies has increased over the last years. While occupant safety has generally benefited from this measure, there is a potential risk that, as a result, rescue time may increase considerably. In more than 60% of all car occupant fatalities a technical rescue has been necessary. These are in particular those cases where occupants die immediately at the accident scene. Therefore, in these cases "rescue time" is a very sensitive parameter. In addition to the general analysis of the need of technical rescue and the actual rescue time depending on model years, the injury pattern of occupants requiring technical rescue will be analysed to provide advice for rescue teams. Furthermore, a detailed analysis of rescue measures for the most popular car models depending on the safety cell design is given.
For the assessment of vehicle safety in frontal collisions, the crash compatibility between the colliding vehicles is crucial. Compatibility compromises both the self protection and the partner protection properties of vehicles. For the accident data analysis, the CCIS (GB) and GIDAS (DE) in-depth data bases were used. Selection criteria were frontal car accidents with car in compliance with ECE R94. For this study belted adult occupants in the front seats sustaining MAIS 2+ injuries were studied. Following this analysis FIMCAR concluded that the following compatibility issues are relevant: - Poor structural interaction (especially low overlap and over/underriding) - Compartment strength - Frontal force mismatch with lower priority than poor structural interaction In addition injuries arising from the acceleration loading of the occupant are present in a significant portion of frontal crashes. Based on the findings of the accident analysis the aims that shall be addressed by the proposed assessment approach were defined and priorities were allocated to them. The aims and priorities shall help to decide on suitable test procedures and appropriate metrics. In general it is anticipated that a full overlap and off-set test procedure is the most appropriate set of tests to assess a vehicle- frontal impact self and partner protection.
To improve vehicle safety in frontal collisions, the crash compatibility between the colliding vehicles is crucial. Compatibility aims to improve both the self and partner protection properties of vehicles. Although compatibility has received worldwide attention for many years, no final assessment approach has been defined. Within the Frontal Impact and Compatibility Assessment Research (FIMCAR) project, different frontal impact test procedures (offset deformable barrier [ODB] test as currently used for Economic Commission for Europe [ECE] R94, progressive deformable barrier test as proposed by France for a new ECE regulation, moveable deformable barrier test as discussed worldwide, full-width rigid barrier test as used in Federal Motor Vehicle Safety Standard [FMVSS] 208, and full-width deformable barrier test) were analyzed regarding their potential for future frontal impact legislation. The research activities focused on car-to-car frontal impact accidents based on accident investigations involving newer cars. Test procedures were developed with both a crash test program and numerical simulations. The proposal from FIMCAR is to use a full-width test procedure with a deformable element and compatibility metrics in combination with the current offset test as a frontal impact assessment approach that also addresses compatibility. By adding a full-width test to the current ODB test it is possible to better address the issues of structural misalignment and injuries resulting from high acceleration accidents as observed in the current fleet. The estimated benefit ranges from a 5 to 12 percent reduction of fatalities and serious injuries resulting from frontal impact accidents. By using a deformable element in the full-width test, the test conditions are more representative of real-world situations with respect to acceleration pulse, restraint system triggering time, and deformation pattern of the front structure. The test results are therefore expected to better represent real-world performance of the tested car. Furthermore, the assessment of the structural alignment is more robust than in the rigid wall test.
When assessing the consequences of accidents normally the injury severity and the damage costs are considered. The injury severity is either expressed within the police categories (slight injury, severe injury or fatal injury) or the AIS code that rates the fatality risk of a given injury. Both injury metrics are assessing the consequences of the accident directly after the accident. However, not all consequences of accidents are visible directly after the accident and the duration of the consequences are different. Besides a physiological reduction of functionality social and psychological implications such as reduced mobility options, problems to continue the original job etc. are happening. In order to assess long term consequences of accidents the MHH Accident Research Unit established a brief questionnaire that is distributed to accident involved people of the Hannover subset of the GIDAS data set approx. one year after the accident beginning with the accident year 2013. The basic idea of using a brief questionnaire (in fact only one page) is to obtain a relatively large return rate because the questionnaire appears to be simple and quickly answered. This appears to be important because it is believed that the majority of accident involved people will not report long term consequences. In order to allow a more detailed survey amongst those responders that are reporting long term consequences they are asked for a written consent for the additional questionnaire that will be distributed at a time that is not yet defined. Long term consequences are reported for all addressed areas, medical, physiological, psychological and sociological by people without injuries, with minor injuries and with severe injuries.
This study examines the severity and types of injuries sustained by child pedestrians aged 18 years and below in order to identify the body regions at greatest risk for injury in a pedestrian accident. Detailed medical diagnoses were reviewed retrospectively for 572 child pedestrians admitted to an urban pediatric trauma center with injuries during the time period from January 2001 to December 2005. Eighty percent of these children sustained AIS 2 or greater injuries, most commonly to the lower extremity (41%) and head (34%). Fortyfour percent of admitted children had more significant AIS 3 or greater injuries primarily to the head (58%), thorax (17%) and lower extremities (14%). Testing procedures to assess the child- interaction with the motor vehicle should include injury assessment for the pediatric head, thorax and lower extremities. This understanding of how child pedestrians interact with motor vehicles may provide insight into effective countermeasures with potential for implementation in vehicle designs world-wide.
Tempered road system
(2014)
The road performance is strongly influenced by climatic conditions. Winter conditions have massive impact on traffic security but also pavement lifetime decreases as an effect of temperature variation during wintertime and summertime. Heating and cooling of a pavement is a possibility to work against these impacts. To discuss the boundary conditions for an efficient construction and operation of a tempered road system a feasibility study has been made. The study shows the feasibility and identifies thermal energy buffering as a main challenge. When thinking of a fully regenerative operation of a large tempered road system (e.g. 20.000 m-²) the storage volume has to be too large for an economic and structurally engineered satisfactory solution. However, the location dependent usage of natural geothermal storage possibilities and as well smart alignment and construction promises a feasibility realization.
A study on knowledge and practices of first aid and CPR among police officers in Colombo and Gampaha
(2017)
Around 85% of deaths in developing countries have been found to be due to road traffic accidents (RTAs), which cost the countries around 1-2% of their gross national product (GNP). In Sri Lanka there were 2,436 deaths reported from 36,045 RTAs in 2014. This study aimed at assessing first aid and cardiopulmonary resuscitation (CPR) knowledge among police officers and identifying its relationship to their first aid and CPR practices. A study was done on 493 police officers from Colombo and Gampaha who were selected using convenience sampling through a self-administered questionnaire. The results showed that the police officers had unsatisfactory knowledge and practices of CPR and interventions for bleeding and fractures. These should therefore be focused in their further training.
The European Enhanced Vehicle-safety Committee wants to promote the use of more biofidelic child dummies and biomechanical based tolerance limits in regulatory and consumer testing. This study has investigated the feasibility and potential impact of Q-dummies and new injury criteria for child restraint system assessment in frontal impact. European accident statistics have been reviewed for all ECE-R44 CRS groups. For frontal impact, injury measures are recommended for the head, neck, chest and abdomen. Priority of body segment protection depends on the ECE-R44 group. The Q-dummy family is able to reflect these injuries, because of its biofidelity performance and measurement capabilities for these body segments. Currently, the Q0, Q1, Q1.5, Q3 and Q6 are available representing children of 0, 1, 1.5, 3 and 6 years old. These Q-dummies cover almost all dummy weight groups as defined in ECE-R44. Q10, representing a 10 year-old child, is under development. New child dummy injury criteria are under discussion in EEVC WG12. Therefore, the ECE-R44 criteria are assessed by comparing the existing P-dummies and new Q-dummies in ECE-R44 frontal impact sled tests. In total 300 tests covering 30 CRSs of almost all existing child seat categories are performed by 11 European organizations. From this benchmark study, it is concluded that the performance of the Q-dummy family is good with respect to repeatability of the measurement signals and the durability of the dummies. Applying ECE-R44 criteria, the first impression is that results for P- and Q-dummy are similar. For child seat evaluation the potential merits of the Q-dummy family lie in the extra measurement possibilities of these dummies and in the more biofidelic response.
Accidents with vulnerable road users require special attention within the road safety work because these accidents are often accompanied with severe injuries. Thus In 2006 at least 6200 Powered Two Wheeler (PTW) riders were killed in road crashes in the EU 25 representing 16% of the total number of road deaths while accounting for only 2% of the total kilometers driven. For the prevention of accidents with VRU above all the knowledge of the causes of the accidents is of special importance. This study is based on the methodology of the German In-Depth Accident Study GIDAS. Within GIDAS extensive data on various fields of accidentology are collected on-scene from road traffic accidents with injuries in the Hannover and Dresden area. Using a well defined sample plan the collected data is highly representative to the whole German situation (Brühning et al, Otte et al). The need of in-depth accident causation data in accident research led to the development of a special tool for the collection of such data called ACASS (Accident Causation Analysis with Seven Steps), which was implemented in the GIDAS methodology in 2008 and described by Otte in 2009.
Since integrated safety systems combine active and passive safety elements in one safety system, it is necessary to define new procedures to evaluate vehicle safety from the overall system point of view. The main goal of the ASSESS project is to develop harmonized and standardized assessment procedures for collision mitigation and avoidance systems. Methods and Data Sources: In ASSESS, procedures are developed for: driver behaviour evaluation, pre-crash system performance evaluation, crash performance evaluation, socio-economic assessment. This paper will concentrate on the activities related to the crash evaluation. The objective is to perform simulations, sled tests and crash tests in order tounderstand the influence of the activation of the pre-crash systems on the occupants" injuries during the crash phase. When a traffic accident is unavoidable, pre-crash systems work on various safety devices in order to improve the vehicle occupants" protection. Braking assistance and adaptive restraint systems are the main pre-crash systems whose effect on the occupants" protection will be described in this paper. Results: The results will be a description of the effect of the activation of the pre-crash systems on the crash phase. Additionally, a set of recommendations for future methodology developments will be delivered. Furthermore, a first approach to the study of the effect of the pre-crash systems activation on the occupants" protection when the impact is unavoidable will be presented. This effect will be quantified using the biomechanical values obtained from the simulation and testing activities and their related injury risks. Simulation and testing activities will consider the following scenarios: - No activation of any pre-crash system, - Activation of one or a combination of several pre-crash systems. In this way, differences in the results obtained from different scenarios will show the effect of each pre-crash system separately during the crash phase. Discussion and Limitations: The set of activities developed in this research project is limited by the fact that with the given resources only a limited number of vehicle models could be investigated. In addition, there are also limitations related to the injury risk curves and the passive safety tools currently on the market. Conclusion and Relevance to session submitted: The paper will present a complete analysis of the effect of pre-crash systems during the crash phase when the impact is unavoidable. Details, limitations and first application experience based on a few examples will be discussed. Currently, there is not any regulation, assessment program, or other similar official procedure able to assess pre-crash systems during the crash phase. This project comprises phases of traffic accidents which have been historically analysed separately, and aims to evaluate them taking into account their interrelationship. ASSESS is one of the first European projects which deals in depth with the concept of integrated safety, defining methodologies to analyse vehicle safety from a global point of view.
As investigations by BASt have shown, a bond between concrete surfaces and bases may be a disadvantage when water penetrates via joints and from the sides if the bond becomes partially detached at an early stage. Free water may penetrate into the area between the concrete surface and the base and build up in areas where the bond is still intact. The high pressure caused by lorry wheels rolling over the pavement causes hydrodynamic pumping. This creates very high flow speeds with considerable corrosion power. This results in the base course surface being eroded in the areas where heavy vehicles drive over the road and may even lead to water and fine particles from the base courses being expelled through the longitudinal joints between the pavement slab and the lower hard shoulder or first overtaking lane. The erosion of the base leads unavoidably to the bearing conditions deteriorating and increased loading of the concrete surface. Cracks may occur and, later stepping-off and tilting of the plates components. This significantly deteriorates the evenness and consequently the service value of the road. This finally leads to a reduction in the service life of the concrete surface. To avoid such damage water which has penetrated must be able to lose pressure and to then seep away. A possible solution is: A nonwoven fabric substance between concrete suface and bound base course. This construction method has proved himselve on numerous test road sections and were rightly included in the new Codes of Practice for the Standardisation of the Upper Structure of Traffic-Bearing Surfaces (Richtlinien für die Standardisierung des Oberbaues von Verkehrsflächen- RStO).
The United Nations Economic Commission for Europe Informal Group on GTR No. 7 Phase 2 are working to define a build level for the BioRID II rear impact (whiplash) crash test dummy that ensures repeatable and reproducible performance in a test procedure that has been proposed for future legislation. This includes the specification of dummy hardware, as well as the development of comprehensive certification procedures for the dummy. This study evaluated whether the dummy build level and certification procedures deliver the desired level of repeatability and reproducibility. A custom-designed laboratory seat was made using the seat base, back, and head restraint from a production car seat to ensure a representative interface with the dummy. The seat back was reinforced for use in multiple tests and the recliner mechanism was replaced by an external spring-damper mechanism. A total of 65 tests were performed with 6 BioRID IIg dummies using the draft GTR No.7 sled pulse and seating procedure. All dummies were subject to the build, maintenance, and certification procedures defined by the Informal Group. The test condition was highly repeatable, with a very repeatable pulse, a well-controlled seat back response, and minimal observed degradation of seat foams. The results showed qualitatively reasonable repeatability and reproducibility for the upper torso and head accelerations, as well as for T1 Fx and upper neck Fx. However, reproducibility was not acceptable for T1 and upper neck Fz or for T1 and upper neck My. The Informal Group has not selected injury or seat assessment criteria for use with BioRID II, so it is not known whether these channels would be used in the regulation. However, the ramping-up behavior of the dummy showed poor reproducibility, which would be expected to affect the reproducibility of dummy measurements in general. Pelvis and spine characteristics were found to significantly influence the dummy measurements for which poor reproducibility was observed. It was also observed that the primary neck response in these tests was flexion, not extension. This correlates well with recent findings from Japan and the United States showing a correlation between neck flexion and injury in accident replication simulations and postmortem human subjects (PMHS) studies, respectively. The present certification tests may not adequately control front cervical spine bumper characteristics, which are important for neck flexion response. The certification sled test also does not include the pelvis and so cannot be used to control pelvis response and does not substantially load the lumbar bumpers and so does not control these parts of the dummy. The stiffness of all spine bumpers and of the pelvis flesh should be much more tightly controlled. It is recommended that a method for certifying the front cervical bumpers should be developed. Recommendations are also made for tighter tolerance on the input parameters for the existing certification tests.
The strong prevalence of human error as a crash causation factor in motorcycle accidents calls for countermeasures that help tackling this issue. Advanced rider assistance systems pursue this goal, providing the riders with support and thus contributing to the prevention of crashes. However, the systems can only enhance riding safety if the riders use them. For this reason, acceptance is a decisive aspect to be considered in the development process of such systems. In order to be able to improve behavioural acceptance, the factors that influence the intention to use the system need to be identified. This paper examines the particularities of motorcycle riding and the characteristics of this user group that should be considered when predicting the acceptance of advanced rider assistance systems. Founded on theories predicting behavioural intention, the acceptance of technologies and the acceptance of driver support systems, a model on the acceptance of advanced rider assistance systems is proposed, including the perceived safety when riding without support, the interface design and the social norm as determinants of the usage intention. Since actual usage cannot be measured in the development stage of the systems, the willingness to have the system installed on the own motorcycle and the willingness to pay for the system are analyzed, constituting relevant conditions that allow for actual usage at a later stage. Its validation with the results from user tests on four advanced rider assistance systems allows confirming the social norm and the interface design as powerful predictors of the acceptance of ARAS, while the extent of perceived safety when riding without support did not have any predictive value in the present study.
There is a need for detecting characteristics of pedestrian movement before car-pedestrian collisions to trigger a fully reversible pedestrian protection system. For this purpose, a pedestrian sensor system has been developed. In order to evaluate the effectiveness of the sensor system, the in-depth knowledge of car-pedestrian impact scenarios is needed. This study aims at the evaluation of the sensor system. The accident data are selected from the STRADA database. The accident scenarios available in this database were evaluated and the knowledge of the most common scenarios was developed in terms of the pedestrian trajectory, the pedestrian speed, the car trajectory, the car velocity, etc. A mathematical model was then established to evaluate the sensor system with different detective angles. It was found that in order to detect all the pedestrians in the most common scenarios on time the sensor detective angle must be kept larger than 60 degrees.
Nowadays human-created systems are increasing in complexity due to the interaction of humans and technology. Especially road traffic systems are composed of multitudinous resources (e.g. personnel, vehicles, organizations, etc.), which make it even harder to anticipate the positive and negative effects on safety. One key in achieving a significant reduction of fatalities is seen in driver assistant systems counterbalancing the lack of drivers' capabilities. But the actual outcome of implementing these sophisticated technologies especially on influencing driver's capabilities are yet unknown. Latest research exemplifies an increase of reaction times of drivers in case of dysfunctional driver assistant systems. This research paper applies STAMP/STPA (STAMP = systems-theoretic accident model and processes; STPA = systems-theoretic process analysis) to the German automobile traffic system focusing on the effects of driver assistant systems on drivers. By doing so, the potential hazards caused by technology can be identified.
The proportion of older road users is increasing because of demographic change (in the group 65+ from current 18% to about 24% by 2030). The mobility needs of people 65+ often differ from those of younger people. Seniors (65+) are already more involved in fatal accidents than younger road users. According to the age development, the senior share of road deaths in the EU of today is increasing nearly one-fifth to one-third. From the in-depth analysis of accidents generic simulation models were developed. Attention has been paid both to psycho-physical characteristics as well as on the social and physical environment and their specifics in conjunction with seniors. By simulating the defined scenarios and varying the defined relevant parameters, accident influencing factors were examined as a basis for avoidance. In addition, the parameters were varied to show the influence from the vehicle, the pedestrian and the infrastructure to avoid the accident or to characterize the conditions for which the accident is inevitable.
In a first step, we have examined approximately 23 000 single vehicle accidents within the Austrian National Statistics database. In a second step, we considered 15% of all fatal "running off the road" accidents that occurred in Austria in 2003. As a result, two accident categories were specified; "leaving the road without preceding manoeuvre" and "leaving the road with preceding manoeuvre". These two categories can be basically characterised by the vehicle- heading angle and its velocity angle. In this report, we further suggest theoretical approaches for the dimensioning of a safety zone, an area adjacent to the road free of fixed objects or dangerous slopes. We also show the link between the two accident categories mentioned above and the real world accidents analysed in detail. These observations also form the basis for the required length for safety devices. Finally, we summarise accident avoidance strategies.
The objective of this study was to identify aspects of the individual experience and behaviour of drivers in intersection accidents. A total of 40 accident drivers sketched their ideas and expectations relating to intersection assistance using the method of Structure Formation Technique. Using this method prepared content cards and relation cards for a subject matter are formed together in a structure through the application of an explicit set of rules. The structures generated in this process were compared with the structures of 20 control persons who have not recently experienced an accident at intersections. The basis for this comparison was a case-control design with matched samples regarding the variables age, sex, education, occupation, driving experience and annual mileage. The results of the accident reports indicate that additional assistance is instrumental in the perception of other road users. Generally the interviewed drivers were open-minded towards the use of intersection assistance systems. Drivers who have recently experienced an accident at intersections significantly more often approved of warning assistance in their vehicle than drivers who have not recently experienced an accident. Further accident experienced drivers favoured warning and information via audio warning more frequently. The ideas of the drivers were strongly shaped by the experiences with already available advanced driver assistance systems. Hence acoustic and visual warnings were generally preferred to tactile warnings. The findings also indicate a relationship between the variable age and the acceptance of automatic vehicle intervention, and the suggestion of a head up display as a configuration of a visual warning system.
Airbags are, together with the three-point belt, the most effective passive safety equipment of vehicles. However, literature shows that sound pressure levels of up to 170 dB can occur during airbag deployment. A literature review revealed no systematic experimental data on possible hearing loss by airbag deployment, that also takes any other crash accompanied noise into account, such as deformation and impact noise. Also the rising number of airbags per vehicle resulting in a higher number of deployed airbags in an accident was not addressed with respect to hearing loss. Thus, an extensive test matrix of noise measurements during airbag deployments was conducted including onboard measuring during crashes and static measurements. Dynamic and static experiments with single and multiple airbag deployments were conducted. The results of this study show, that in the analyzed crash constellations the acoustic emission of the collision as well as the car deformation can trigger the stapedius reflex before the airbag deployment. The stapedius reflex protects the inner ear at least partially in case of dangerous sound levels. However, it seems that multiple airbag deployments in a short sequence pose a considerable risk for hearing impairments despite the fully contracted stapedius muscle. Further and in line with Price et al. (2013) it was found that the risk of hearing loss is lower with closed windows. The analysis of patient and accident data showed no link between airbag deployment and hearing loss. This might be caused by low case numbers of reported hearing loss problems up to now. In conclusion the results show that a singular analysis of the sound pressure of airbag deployments without crash accompanied noises is not sufficient as the protective effect of the stapedius reflex is neglected. Still, successive airbag deployments in a short timeframe raise the risk of hearing loss. Further investigation on hearing impairment due to airbag deployment and triggering of the stapedius reflex is needed and the data acquisition of accidents and patients should consider hearing loss aspects.
Although the bus belongs to the safest traffic means, single accidents can be particularly severe and concern many passengers. Especially in case of fires a high number of injured and killed persons can be the outcome. Fire safety of buses therefore is of high importance. With the increase of plastic materials as a material for the interior equipment of buses and coaches due to their good mechanical properties combined with low weight, the question arises whether the safety level has decreased in case of a fire during the last years " also compared to other means of transport. Because of the combustible plastics and their ability to release a high amount of heat the main fire load in buses is no longer the fuel but the plastic materials which are also often easy to ignite. Besides the flammability of the equipments, also the production of smoke, the smoke development and propagation as well as its toxicity are of interest. That counts for the passengers as well as for the test methods and its limit values. The severe fire in Germany near Hanover in 2008 with 20 fatalities showed how disastrous such fires can be. For those reasons several research projects were initiated on behalf of the German Federal Highway Research Institute. At the one hand the fire behaviour of coach interiors was examined in general focusing on fire propagation as well as fire detection and signalling. As result, recommendations with regard to early fire detection systems for the engine compartments and onboard extinguishing equipment were elaborated. On the other hand research was carried out to examine heat release, smoke, smoke propagation and its toxicity due to burning bus interior materials. In this project small and real scale experiments on material specimens, interior parts and vehicles were performed. Trains and buses often have very similar operation conditions. Consequently, bus interior material was tested according to the regulations for rail vehicles, i.e. DIN EN 45545 as well as DIN 5510. None of the tested bus interior materials would have been allowed to use in a train. The fire safety regulations for bus materials are on a low level compared to other transport sectors, i.e. railway, ship and aircraft. Also numerical investigations with the Fire Dynamics Simulator (FDS) were performed. The very rapid fire development during the severe bus fire from 2008 could be predicted with the numerical model. The model was then used to investigate the influence of different materials, ventilation conditions and ignition sources. The bus materials contribute significantly to a very rapid fire development in bus fires. Especially, the flammable ceiling and the passenger seats were identified to be key issues of the fire propagation in a bus and can be explained by the rapid fire spread along the ceiling and the high fire load of passenger seats. As conclusion of the project effective and economically reasonable fire safety requirements for interiors of buses are recommended which would improve the current situation. Proposals for amendments of current requirements are recommended including the specification of appropriate limit values. In particular, it is taken into consideration which reasonable fire safety standards from other transport sectors, especially the rail sector, should be transferred to buses
The case study "Digital Test Area Autobahn" is presented. A new built (September 2016) pre-stressed concrete bridge is equipped with different monitoring systems for the detection of traffic load, climatic influence and the reaction of the bridge. Possibilities for the implementation of a VoI (Value of Information) analyses are presented.
In road traffic accidents, a car-seat and its occupant can be subjected to various crash pulses in the case of a rear impact. This study investigates the influence of crash pulse shape on seat-occupant response and evaluates the corresponding risk of whiplash injury. For this purpose, a rigorously validated seat-occupant system model is used to study different carseat designs and crash pulses. Two different car-seat concepts are also presented which can effectively mitigate whiplash injury for a wide range of crash severity. It is shown that for crash pulses of similar severity, the level of whiplash-risk depends strongly on the combined effects of seat design and crash pulse shape.
Urban runoff is known to transport a significant pollutant load consisting of e.g. heavy metals, salts and hydrocarbons. Interactions between solid and dissolved compounds, proper understanding of particle size distribution, dissolved pollutant fractions and seasonal variations is crucial for the selection and development of appropriate road runoff treatment devices. Road runoff at an arterial road in Augsburg, Germany, has been studied for 3.5 years. A strong seasonal variation was observed, with increased heavy metal concentrations with doubled and tripled median concentrations for heavy metals during the cold season. Correlation analysis showed that de-icing salt is not the only factor responsible for increased pollutant concentrations in winter. During the cold period, the fraction of dissolved metals was lower compared to the warm season. In road dust, the highest metal concentrations were measured for fine particles. Metals in road runoff were found to show a significant correlation to fine particles SS63 (<63 μm). Therefore, it is debatable whether treatment devices only implementing sedimentation processes provide sufficient removal rates.
In most of developed countries, the progress made in passive safety during the last three decades allowed to drastically reduce the number of killed and severely injured especially for occupants of passenger cars. This reduction is mainly observed for frontal impacts for which the AIS3+ injuries has been reduced about 52% for drivers and 38% for front passengers. The stiffening of the cars' structure coupled with the generalization of airbags and the improvement of the seatbelt restraint (load limiter, pretension, etc.) allowed to protect vital body regions such as head, neck and thorax. However, the abdomen did not take advantage with so much success of this progress. The objective of this study is to draw up an inventory on the abdominal injuries of the belted car occupants involved in frontal impact, to present adapted counter-measures and to assess their potential effectiveness. In the first part the stakes corresponding to the abdominal injuries will be defined according to types of impact, seat location, occupants' age and type of injured organs. Then, we shall focus on the abdominal injury risk curves for adults involved in frontal impact and on the comparisons of the average risks according to the seat location. In the second part we will list counter-measures and we shall calculate their effectiveness. The method of case control will be used in order to estimate odds ratio, comparing two samples, given by occupants having or not having the studied safety system. For this study, two type of data sources are used: national road injured accident census and retrospective in-depth accident data collection. Abdominal injuries are mainly observed in frontal impact (52%). Fatal or severe abdominal occupant- injuries are observed at least in 27% of cases, ranking this body region as the most injured just after the thorax (51%). In spite of a twice lower occupation rate in the back seats compared to the front seats, the number of persons sustaining abdominal injuries at the rear place is higher than in the front place. In recent cars, the risk of having a serious or fatal abdominal injury in a frontal impact is 1.6% for the driver, 3.6% for the front passenger and 6.3% for the rear occupants. The most frequently hurt organs are the small intestine (17%), the spleen (16%) and the liver (13%). The most common countermeasures have a good efficiency in the reduction of the abdominal injuries for the adults: the stiffness of the structure of the seats allows decreasing the abdominal injury risk from 54% (driver) to 60% (front occupant), the seatbelt pretensioners decrease also this risk from 90% (driver) to 83% (front passenger).
Rollovers continue to be a major source of heavy truck fatalities when compared to other accident modes. Real world rollover accidents are analyzed and two distinct damage patterns are identified. Damage to heavy truck roofs can occur from lateral loading that transitions to vertical roof loading as the vehicle rolls onto its side and then over onto its roof. A second load path can occur when the vehicle has rolled onto its side and furrows into the ground generating large longitudinal friction forces between the roof and ground. A review of the previous literature and various test methodologies are presented. A sled impact test methodology is presented which allows for structural assessment of a heavy truck cab's crashworthiness in both of these loading environments. Two test series are presented using the sled impact test methodology in order to analyze real world truck rollovers using varying impact platen and contact angles. The structural deformation and failure patterns were found to be consistent with damage seen in real world accident vehicles. In each case, a second equivalent truck cab was then reinforced and tested under similar conditions to evaluate the energy management and crush resistance of a stronger cab structure. These structural reinforcements demonstrated a substantial reduction in roof crush and protected the survival space of the occupant compartment. The sled impact test procedure is an effective method for testing the structural performance of a heavy truck cab in a variety of loading scenarios comparable to real world accidents and ascertaining the load and energy load levels in these accident modes.
Road transport networks are of major importance for the economy and equally for the mobility of the citizens in the European countries. In order to improve the protection of transport infrastructures and the robustness of the European road network research projects are currently in process on national and European level. A main focus of these investigations is to analyze the specific vulnerabilities of bridges and tunnels concerning structural, operational and organizational aspects and to identify critical objects. But also infrastructures, which are critical due to their location and function in a road network, must be identified. For this the resulting regional and supra-regional impacts due to the failure of certain infrastructures have to be investigated on network level. In order to increase the security of road transport infrastructures and whole road networks the most effective security measures have to be determined. This paper gives an overview about the content and first results of current European and German research projects on road transport security.
A very high service availability is important for the operator and for the user of road tunnels, too. The service availability of a structure is directly related to its quality. The earlier quality assurance measures are being considered during the life cycle, the better a structure of high quality can be guaranteed. Problems which occur during the operation period of a structure often result from design errors or from inadequate realisation during the construction phase. They may also occur as a result of wrongly planned maintenance and refurbishment works. Thus, the transfer of specific data, information and experiences through the whole life cycle is very important. In this context methods of facility management can provide efficient assistance when they have already been used throughout all three classic phases of a structure's life cycle - planning, construction and operation. Finally the tunnel drainage system of German road tunnels is considered as an example as practical application possibility.
Data concerning accidents involving personal injury which have been collected in the context of in-depth investigations on scene in the Hannover area since 1973 and in the Dresden area since 1999 represent an important basis for empirical traffic safety research. At national and international level various analyses and comparisons are carried out on the basis of "in-depth data" from the above mentioned investigations. In-depth data play a decisive role e.g. within the validation of EuroNCAP results on secondary safety (crashworthiness) of individual passenger car models. Thus, statistically sound methods of data analysis and population parameter estimation are of high importance. Since the 1st of August 1984 the "in-depth investigations on scene" in the Hannover area have been carried out according to a sampling plan developed by HAUTZINGER in the context of a research project on behalf of BASt. In the meantime a second region of in-depth investigation on scene was added with surveys in Dresden and the surrounding area. Internationally, the acronym GIDAS (German In-Depth Accident Study) is commonly used for the two above mentioned surveys. The objective of a current research project (topic of this contribution) is, among other things, to examine and adjust the previous weighting and expansion method for the two regional accident investigations to the current general conditions.
Empirical vehicle crashworthiness studies are usually based on national or in-depth traffic accident surveys: Data on accident-involved cars/drivers are analysed in order to quantify the chance of driver injury and to assess certain risk factors like car make and model. As the cars/drivers involved in the same accident form a "cluster", where the size of the cluster equals the number of accident-involved parties, traffic accident survey data are typical multi-level data with accidents as first-level or primary and cars/drivers as secondlevel or secondary units (car occupants in general are to be considered as third level units). Consequently, appropriate statistical multi-level models are to be used for driver injury risk estimation purposes as these models properly account for the cluster structure of traffic accident survey data. In recent years various types of regression models for clustered data have been developed in the statistical sciences. This paper presents multi-level statistical models, which are generally applicable for vehicle crashworthiness assessment in the sense that data on single and multiple car crashes can be analysed simultaneously. As a special case of multi-level modelling driver injury risk estimation based on paired-by-collision car/driver data is considered. It is demonstrated that assessment results may be seriously biased, if the cluster structure inherent in traffic accident survey data is erroneously ignored in the data analysis stage.
Crash involvement studies using routine accident and exposure data : a case for case-control designs
(2009)
Fortunately, accident involvement is a rare event: the chance of an individual road user trip to end up in a crash is close to zero. Thus, according to general epidemiological principles one can expect the case-control study design to be especially suitable for quantifying the relative risk (odds ratio) of accident involvement of road users with a certain risk factor as compared to road users that do not have this characteristic. Ideally, of course, the database for such a case-control study should be established by drawing two independent random samples of cases (accidental units) and controls (nonaccidental units), respectively. If, however, special data collection is not an option, it is nevertheless possible to analyze routine accident and exposure data under a case-control design in order to fully exploit the information contained in already existing databases. As a prerequisite, accident and exposure data from different sources are to be combined in a single file of micro or grouped data in a way consistent with the case-control study design. Among other things, the proposed methodological approach offers the possibility to use in-depth data of the GIDAS type also in investigations of active vehicle safety by combining this data with appropriate vehicle trip data collected in mobility surveys.
This article reports on a two-year study (2006 to 2008) of the distribution of de-icing salts (NaCl) applied to the road and the influence of traffic on the effective times of the de-icing salts. The research was focused on the needed resting periods of de-icing salts on road surfaces. The study used sensors installed in two lanes of the Motorway A4 in the area of the Dresden-Hellerau Highway Surveillance Center (Germany), to measure air and ground temperatures, wind speed and direction, liquid film thicknesses and residual quantities of salt on the road surface during ongoing traffic at 5-minute intervals. The authors conclude with four observations that can be useful for applying de-icing salts more judiciously: preventive spreading is only sensible if applied timely, i.e. immediately prior to icing events to be expected; the time-frame for preventive spreading on the dry road surface is maximum 60 minutes and on the moist road surface maximum 120 minutes; by increasing spreading densities in preventive spreading, this timeframe cannot be extended; it is completely sufficient if the spreading width is adjusted in such a way that the outer wheel tracks are also covered by the spreading. Distribution across the entire width of the lane will be caused by the rolling traffic within a few minutes.