Konferenzveröffentlichung
Filtern
Erscheinungsjahr
Dokumenttyp
- Konferenzveröffentlichung (637) (entfernen)
Schlagworte
- Conference (386)
- Konferenz (382)
- Germany (212)
- Deutschland (209)
- Unfall (188)
- Accident (187)
- Safety (123)
- Sicherheit (122)
- Injury (117)
- Verletzung (117)
Institut
The fact that ADAC Air Rescue handles approximately 4,000 road accident missions every year gave rise to set up an accident research programme for which ADAC Air Rescue provides its data. This data is of initial informational quality and will be supplemented by data from the police, experts, fire brigades as well as hospitals and forensic institutes. Although the number of cases is still rather low, certain tendencies can be identified. The causes for most accidents occur when joining or intersecting traffic, followed by speeding in road bends and tailgating. Many accidents involve HGV rear end collisions, often causing serious injuries, considerable damage and technical problems for the rescue operations. With regard to the various impact types, it has become obvious that most of the extremely serious injuries are inflicted during a passenger car side impact. In addition, access to and removal of trapped passengers is becoming more and more complicated, partly due to the increasing use of high-strength materials, and rescue operations tend to be more time consuming.
This study aimed at comparing head Wrap Around Distance (WAD) of Vulnerable Road User (VRU) obtained from the German in-depth Accident Database (GIDAS), the China in-depth Accident Database (CIDAS) and the Japanese in-depth Accident Database (ITARDA micro). Cumulative distribution of WAD of pedestrian and cyclist were obtained for each database (AIS2+) showing that WAD of cyclists were larger than the ones of pedestrians. Comparing three regions, the 50%tile WAD of GIDAS was larger than that of both Asian accident databases. Using linear regression that might predict WAD of pedestrians and cyclists from Impact speed and VRU height, WADs were calculated to be 206cm/219cm (Pedestrian/Cyclist) for GIDAS, 170cm/192cm for CIDAS and 211cm/235cm for ITARDA. In addition, this study may be helpful for reconsideration of WAD measurement alignment between accident reconstruction and test procedures.
Since 2008, the authors inspected fatal traffic accidents on the spot every year, with the cooperation of Toyota police station in Aichi pref. In the jurisdiction, numbers of fatal accidents were 18 in 2008, 12 in 2009, 14 accidents in 2010, and 16 in 2011. We here report the results of our analysis of information obtained by detailed inspection for those that occurred from 2008 to 2010. We focused on vehicle-to-pedestrian accidents, which accounted for about 45% of all accidents in 2008. Because many accidents occurred on residential roads not far from pedestrians" homes, it was revealed that the decrease of the collision speed by traffic calming such as humps and zone speed management, was highly effective. On the other hand, pedestrian detection technologies seemed to be also effective as a countermeasure on vehicle side. Every pedestrian position against a vehicle was clarified and TTC (Time to Collision) was calculated provisionally. Pedestrian accidents in intersections were also examined. Among the intersection pedestrian accidents within the jurisdiction, compared with the national average in Japan, the ratio of intersections without a signal and the ratio without a pedestrian crossing were high. According to the comparison of the Japanese traffic accident patterns between 2001 and 2008, pedestrian accidents during turning right and turning left did not decrease much. For elderly drivers, these accidents occurred very often. Finally, single vehicle accidents were analysed with the accident pattern analysis methods used above. There were high numbers of single vehicle accidents against object on single roads. Although fatal accidents against guardrails decreased, the numbers of fatal accidents against a utility pole and a sign pole were nearly constant. As for the impact with narrow width objects such as utility poles, the fatality rate was very high, and countermeasures of both road infrastructure and vehicles seem to be effective.
Driver distraction
(2017)
This report for the Institute of Advanced Motorists (IAM) summarises recent research and knowledge from scientific studies about distracted driving. The report defines what it means to be "distracted" when driving, discusses the impact of distraction on driver behaviour and safety, and what can be done to reduce distracted driving. The focus of distraction discussed here relates to how drivers engage with technology when driving. The report begins with a background to driver distraction, followed by discussion about what is actually meant by driver distraction. It is then considered why humans cannot successfully do two things at the same time, particularly within the context of driving. The subsequent section summarises the scientific research findings to date with regard to driver distraction and technology, and how this affects different types of road user. Recommendations for how driver distraction can be mitigated in the real world and a summary conclude the report. Responses to common questions raised by drivers are presented in Appendix A.
Die Klinik für Frührehabilitation und Geriatrie, Westküstenklinikum Heide ist Bestandteil eines Kooperationsnetzwerks und wirkt am Erhalt der Mobilität und Autonomie älterer Verkehrsteilnehmer im Landkreis Dithmarschen mit. Die Zusammenarbeit mit Seniorenbeiräten, Landesverkehrswacht, Fachdiensten, Polizei-Dienststellen, Ärzten und Psychologen sowie Fahrlehrern ermöglicht eine breite Datenerfassung zum Thema ältere Kraftfahrer, insbesondere zu ihrem Unfallgeschehen.
In einer Stichprobe von 75-jährigen Autofahrern, die in der geriatrischen Tagesklinik der Klinik für Frührehabilitation und Geriatrie rehabilitiert wurden, fanden sich relativ häufig kognitive Beeinträchtigungen, die auf das Vorliegen einer beginnenden Demenz zurückgeführt werden konnten. Darüber hinaus bestanden Störungen des Dämmerungssehens und der Sehschärfe. Auch wurde Multimorbidität diagnostiziert. Bei einer großen Gruppe (46 %) dieser Patienten war zu Behandlungsbeginn die Fahreignung nicht gegeben, und nur 29 % der Untersuchten konnte eine uneingeschränkte Fahreignung attestiert werden. Gezielte rehabilitative Interventionen trugen dazu bei, dass im Behandlungsverlauf die Fahreignung zumindest eingeschränkt wieder erreicht werden konnte.
Ziel der Forschungsarbeiten zum Thema Durchsickerung von Straßenböschungen ist es, ausgewogene Beurteilungskriterien für einen umwelteffizienten und zugleich ökonomischen Einsatz von Ersatzbaustoffen und Bodenmaterial zu schaffen. Durch eine belastbare Datengrundlage zur Erfassung des Wasserhaushaltes des gesamten Bauwerkes können Instrumente entwickelt werden, um die Wirksamkeit der unterschiedlichen technischen Sicherungsmaßnahmen zu beurteilen. Um dieses Ziel zu erreichen, verfolgt die Bundesanstalt für Straßenwesen verschiedene Projektansätze zum Thema Durchsickerung von Straßenböschungen. Jeder Projektansatz hat seine Stärken und Schwächen. Durch großmaßstäbliche Versuche können die realen Verhältnisse gut wiedergegeben werden. Solche Versuche sind jedoch personalintensiv und langwierig. Schneller und preisgünstiger sind Modellrechnungen. Die Qualität der Berechnungen hängt aber stark von der Qualität der gewählten Parameter ab. Durch inverse Modellierung müssen die Eingabeparameter der Programme zur Modellrechnung an die Realität angepasst werden. Die realen Bedingungen werden am besten durch ein Pilotprojekt an einem realen Versuchsdamm wiedergegeben. Diese Versuche sind sehr aufwendig und sehr kostenintensiv, aber zur Validierung der Modellrechnung und der großmaßstäblichen Versuche erforderlich. In dem Betrag wird beschrieben, welche großmaßstäblichen Versuche durch die Bundesanstalt für Straßenwesen (BASt) durchgeführt wurden und wie sie von Anfang an durch Simulationsrechnungen begleitet wurden.
Improving the security of critical road infrastructure is a major task for owners and operators of tunnels and bridges in the European TEN-T Network (Trans-European Networks of Transport) (European Parliament and Council 1996). Up to now, there has not been a systematic procedure for identifying and assessing critical infrastructure objects and selecting appropriate protection measures. The EC FP7 project SeRoN for the first time presents an innovative methodology in order to support road owners and operators in handling this complex task. This paper describes the methodology and project results in detail by giving an introduction into its practical application.
This paper deals with the determination of test criteria for the durability assessment of polyvinyl chloride (PVC)-based geosynthetic barriers (GBR-P) products in tunnel sealing systems. In the project different products for road tunnel application are investigated by systematic long time storage in hot water using a new test procedure based on SIA V 280 standard (test no. 13) and EN 14415. The objective of this research project is to derive suitable exposure conditions and criteria for a practical testing procedure with regard to service lifetimes of up to 100 years. For that test temperature and time as well as the best suitable test medium have been investigated in a structured way. To verify the results of the new test procedure the material properties of GBR-P samples removed from older road tunnels are investigated. Based on the presented results of the still on-going research program some preliminary conclusions regarding the updating of the German regulations for road tunnel sealing systems (ZTV-ING part 5 section 5 and TL/TP KDB) are given.
Tunnel in Spritzbetonbauweise werden in der Regel mit einem Abdichtungssystem aus Kunststoffdichtungsbahnen (KDB) gegen das anstehende Bergwasser abgedichtet. Die Tunnelabdichtungen aus KDB müssen dabei über die gesamte Nutzungsdauer des Bauwerks von in der Regel 130 Jahren zuverlässig ihre Funktion erfüllen. Ein einfacher Austausch der KDB oder der Einbau einer gleichwertigen Alternative ist in der Regel nicht, oder nur mit erheblichem Aufwand möglich. Bislang existieren national und international keine abgesicherten Prüfkriterien, die eine Bestimmung der Langzeitbeständigkeit von KDB über die geforderte Nutzungsdauer von mindestens 100 Jahren ermöglichen. Im vorliegenden Beitrag werden Untersuchungsergebnisse eines BASt Forschungsprojektes präsentiert, in dem Prüfkriterien für die Abschätzung der Langzeitbeständigkeit von KDB aus PVC-P hergeleitet werden. In diesem Projekt werden verschiedene marktübliche KDB für die Tunnelabdichtung mit einem beschleunigten Prüfverfahren "Lagerung in heißem Wasser" systematisch auf ihr Alterungsverhalten hin untersucht. Das hierfür verwendete Immersionsprüfverfahren wurde neu entwickelt und basiert auf der SIA V 280 (Prüfung Nr. 13) und DIN EN 14415. Ziel der Untersuchungen ist es, die erforderlichen Prüfkriterien zu definieren, die für eine praxisgerechte Abschätzung der Nutzungsdauer von mindestens 100 Jahren erforderlich sind. Hierfür werden beispielsweise die Einlagerungsdauer, die Einlagerungstemperatur und das Prüfmedium strukturiert untersucht. Zum Vergleich der Prüfergebnisse aus dem Immersionsprüfverfahren werden Untersuchungen an ausgebauten KDB Proben aus 2 älteren Straßentunneln herangezogen. Die Ergebnisse des Forschungsvorhabens sollen in die Fortschreibung des nationalen Regelwerks für den Straßentunnelbau (TL/TP KDB) einfließen.
Untersuchungen an in situ gealterten Kunststoffdichtungsbahnen aus Abdichtungen von Straßentunneln
(2011)
Tunnel in Spritzbetonbauweise werden in der Regel mit einem Abdichtungssystem aus Kunststoffdichtungsbahnen (KDB) gegen das anstehende Bergwasser abgedichtet. Zur Gewährleistung der Dauerhaftigkeit und Gebrauchstauglichkeit aber auch der Verkehrssicherheit (z.B. Gefahr der Glatteisbildung in undichten Tunneln) müssen die Tunnelabdichtungen aus KDB dabei über die gesamte Nutzungsdauer des Bauwerks von in der Regel 100 Jahren zuverlässig Ihre Funktion erfüllen. An der Entwicklung von Prüfverfahren zum Nachweis dieser Nutzungsdauer wird zurzeit national und international intensiv geforscht. Zur Verifizierung und Kalibrierung dieser Prüfverfahren können Untersuchungen an in situ gealterten KDB-Proben aus bestehenden Straßentunneln sehr nützlich sein. Im vorliegenden Beitrag werden erste Ergebnisse der Untersuchungen zu Materialeigenschaften von ausgebauten KDB Proben aus älteren Straßentunneln vorgestellt. Im Rahmen eines Forschungsprojektes der Bundesanstalt für Straßenwesen (BASt) wurden bereits zahlreiche Materialproben aus bestehenden Straßentunneln, die aktuell bautechnisch nachgerüstet werden, entnommen und untersucht. Bei der Entnahme der KDB-Proben wurde parallel auch die Bergwassertemperatur gemessen und an Bergwasserproben der Chemismus analysiert. Soweit möglich wurden die Produktdaten des Anlieferungs- bzw. Einbauzustandes beim Hersteller oder Bauherrn recherchiert, um so die Veränderungen der mechanischen Eigenschaften durch die in situ Alterung bewerten zu können. Die ermittelten mechanischen Eigenschaften nach Alterung wurden mit den Anforderungen damals gültiger und aktueller Regelwerke verglichen.
The first stage of the work has been to collate information on bridge assessment from the participating countries. In the later stages, the aim is to provide guidelines that reflect the current best practices, a methodology that will allow for future development and sufficient flexibility to accommodate variations in national priorities as the process of harmonisation is pursued. The following tasks fall within the scope of the project: (1) a review of current procedures and standards used for bridge assessment in Europe; (2) the development of models for taking into account the bridge specific traffic conditions and material properties; (3) the use of reliability methods based on a probabilistic approach for bridge assessment including the use of measurements for updating the reliability of structural elements; and (4) the provision of recommendations for methods and procedures that can be adopted for the assessment module of the management framework highlighting where further development will be beneficial.
In the project SECMAN " SECurity MANual " a simple four-step procedure for the identification of critical road infrastructures, assessment of these infrastructures regarding various man-made threats and the determination of effective protection measures was developed. These methodologies are summarized and combined into a comprehensive best-practice manual which allows for a trans-national structured and holistic security-risk-management approach for owners and operators of road infrastructures in Europe. This paper presents the developed methodology starting from the assessment procedures of a network's criticality over an object's attractiveness and vulnerability to the selection process of appropriate protection measures.
Die europäischen Länder, die ein Programm zur Erhöhung der Verkehrssicherheit eingeführt haben, weisen in der Regel einen gesteigerten Rückgang an Getöteten und Verletzten auf. Im Vordergrund dieser Programme stehen neben der Reduktion der Unfälle die Umsetzbarkeit, die Finanzierbarkeit, die politische und soziale Akzeptanz sowie die Kosteneffizienz. Im Anschluss an die Erörterung der Merkmale einer erfolgreichen Verkehrssicherheitsarbeit werden zunächst beispielhaft die Planziele der Programme in Finnland (im Jahr 2010 weniger als 250 Getötete) und in Österreich (Reduktion der Getöteten um 50 % und eine Verminderung der Unfälle mit Personenschaden um 20 % bis 2010) vorgestellt. Die bisherige Entwicklung der Unfallzahlen wird auf je einer Grafik veranschaulicht. Anschließend werden das Hauptziel der Europäischen Kommission, die Halbierung der Zahl der Verkehrstoten 2001 bis 2010, sowie die Entwicklung der Zahlen von 1990 bis 2005 beziehungsweise 2010 (Zielvorgabe) dargestellt. Eine weitere vergleichende Grafik gibt die Zahl der Verkehrstoten in den Jahren 1995 und 2004 in allen Ländern der Europäischen Union (EU) wieder. Schließlich werden noch verschiedene Bemühungen der World Health Organisation (WHO) erwähnt.
Despite the steadily declining number of pedestrian fatalities and injuries in most European countries during recent decades, pedestrian protection is still of great importance in the European Union as well as in Germany. This is because they still constitute a large proportion of road user casualties and are more likely to suffer serious and fatal injuries than most other road users. In 1999 only car occupants suffered more fatal injuries than pedestrians in Germany. In December 1998, EEVC WG 17 completed their review and updating of the EEVC WG 10 pedestrian test procedure that made it possible to evaluate the protection afforded to pedestrians by the front of passenger cars in an accident. Within the scope of this procedure, four different impactors are used representing those parts of the body which are injured very often and/or very seriously in vehicle-pedestrian-collisions. In a project executed by IKA and BASt, a small family car was tested according to the EEVC WG 17 test procedure. Afterwards modifications to the car were carried out in order to improve the pedestrian protection provided by the vehicle design. There were certain restrictions placed on the level of modifications undertaken, e.g. only minor modifications to vehicle styling and to the vehicle structures, which provide passenger protection. The redesigned vehicle was tested again using the WG 17 test procedure. The test results of the modified vehicle were compared with those of the standard vehicle and evaluated. The results show that considered measures for pedestrian protection in many areas of the vehicle front structure and the use of innovative techniques can lead to a significant reduction of the loads of pedestrians at an acceptable expense.
Many big cities in Europe and elsewhere in the world have problems managing the traffic especially during rush hours. The improvement of the parking problematic and environmental protection as well are important aspects for the future traffic design of urban areas. To improve the traffic situation the development of new traffic concepts and alternative vehicles are required. The BMW company has developed a new type of two-wheel vehicle. This two-wheeler constitutes a totally new concept. BMW implemented a lot of safety features, such as a structure made up of rollover bars and a crush element instead of a front protecting plate. Furthermore the driver can secure himself with two safety belts. The paper contains a description of the novel two-wheel vehicle concept designed so far. BMW's concept and the safety features are also explained. The Federal Highway Research Institute (BASt) was given the task of assessing the concept as a whole with regard to the active and passive safety and the exemption of the obligation to wear a helmet. The expertise concluded that the BMW two-wheeler concept has a very high safety standard. Some extracts of the expertise, in particular the investigations concerning the exemption of the obligation to wear a helmet are presented. Common legal requirements for the vehicle registration of vehicle concepts similar to the BMW two-wheeler in Germany have been formulated.
In der Europäischen Union (EU) gab es 1999 circa 1,3 Millionen Straßenverkehrsunfälle mit Personenschaden, wobei circa 42.000 Personen getötet wurden. Ziel der EU ist es diese Zahl auf 25.000 im Jahr 2010 zu senken. Die EEVC befasst sich bereits seit Anfang der 80er Jahre mit der Thematik Fußgängerschutz in verschiedenen Arbeitsgruppen. Im Dezember 1998 legte die EEVC-Arbeitsgruppe 17 "Fußgängersicherheit" ihren Abschlussbericht vor, in dessen Anhang ein Prüfverfahren zum fahrzeugseitigen Fußgängerschutz enthalten ist. Dieses Prüfverfahren wird vorgestellt. Es basiert auf Komponententests. Unterschieden werden drei Prüfkörperarten und insgesamt vier Prüfkörper. Aus wissenschaftlicher Sicht und aus Sicht der Unfallforschung empfiehlt die EEVC-Arbeitsgruppe 17 eine umfassende Einführung des vorgeschlagenen Prüfverfahrens mit allen Prüfkörpern, gegebenenfalls in Form einer stufenweisen Einführung.
As the official German catalogue of accident causes has difficulty in matching the increasing demands for detailed psychologically relevant accident causation information, a new system, based on a "7 Steps" model, so called ACASS, for analyzing and collecting causation factors of traffic accidents, was implemented in GIDAS in the year 2008. A hierarchical system was developed, which describes the human causation factors in a chronological sequence (from the perception to concrete action errors), considering the logical sequence of basic human functions when reacting to a request for reaction. With the help of this system the human errors of accident participants can be adequately described, as the causes of each range of basic human functions may be divided into their characteristics (influence criteria) and further into specific indicators of these characteristics (e.g. distraction from inside the vehicle as a characteristic of an observation-error and the operation of devices as an indication for distraction from inside the vehicle. The causation factors accordingly classified can be recorded in an economic way as a number is assigned to each basic function, to each characteristic of that basic function and to each indicator of that characteristic. Thus each causation factor can be explicitly described by means of a code of numbers. In a similar way the causation factors based on the technology of the vehicle and the driving environment, which are also subdivided in an equally hierarchical system, can be tagged with a code. Since the causes of traffic accidents can consist of a variety of factors from different ranges and categories, it is possible to tag each accident participant with several causation factors. This also opens the possibility to not only assign causation factors to the accident causer in the sense of the law, but also to other participants involved in the accident, who may have contributed to the development of the accident. The hierarchical layout of the system and the collection of the causation factors with numerical codes allow for the possibility to code information on accident causes even if the causation factor is not known to its full extent or in full detail, given the possibility to code only those cause factors, which are known. Derived from the systematic of the analysis of human accident causes ("7 steps") and from the practical experiences of on-scene interviews of accident participants, a system was set in place, which offers the possibility to extensively record not only human causation factors in a structured form. Furthermore, the analysis of the human causation factors in such a structured way provides a tool, especially for on-scene accident investigations, to conduct the interview of accident participants effectively and in a structured way.
With an ever rising human life expectancy the share of elderly people in society is constantly rising. This leads to the fact that at the same rate the share of people with age related diseases such as dementia and poor eyesight taking part in traffic will rise and therefore traffic accidents caused by this group of people due to the disease will play an ever greater role. This Situation will be among the future challenges of road safety work. At present this study displays specific characteristics of accidents caused by elderly car drivers (aged 65 or higher) based on the analysis of the German In-Depth Accident Study GIDAS. Herein almost 1000 elderly car drivers were identified as accident participants in the years 2008 to 2011. The focus of this study lies on identifying special types of accidents which are caused by elderly drivers and on characterizing these types with the information gathered on scene and by interviewing the participants. The main evidence analyzed is the knowledge about the accident locality, the trajectories of the participants as well as the reasons for the occurrence of the accidents. Furthermore personal information such as the personal condition before the accident and driving purposes is used to identify patterns of contributing circumstances for accidents caused by elderly traffic participants.
In the context of this study, different data sources for accident research were examined regarding their possible data access and evaluated concerning the individual quality and extent of the data. Analyses of accidents require detailed and comprehensive information in particular concerning vehicle damages, injury patterns and descriptions of the accident sequence. The police documentation supplies the basic accident statistics and is amended in the context of the forensic treatment by further information, e.g. by medical and technical appraisals and witness questionings. As a new approach to the data acquisition for the analysis of fatal traffic accidents, the information was made usable which was collected by the police and by the investigations of the public prosecutor. The best strategy for obtaining reliable, extensive and complete data consists of combining the information from these two sources: the very complete, but elementary statistic data of the Niedersächsisches Landesamt für Statistik (Lower Saxony State Authority of Statistics), based on the police documentation as well as the very extensive accident information resulting from the investigation documentation of the public prosecutor after conclusion of the procedure, the so-called Court Records. Of all 715 fatal traffic accidents, which happened in the year 2003 in the German State of Lower Saxony, 238 cases were selected by means of a statistically coincidental selective procedure based on a statistically representative manner (every third accident). These cases cover the investigation documents of the 11 responsible public prosecutor- offices, which were requested and evaluated while preserving the data security. Of the 238 cases 202 cases were available, which were individually coded and stored in a data base using 160 variables. Thus a data base of a sample of representative data for fatal accidents in Lower Saxony was set up. The data base contains extensive information concerning general accident data (35 variables), concerning road and road surface data (30 variables), concerning vehicle-specific data (68 variables) as well as concerning personal and injury data (27 variables).
Within the COST Action TU1101 the working group WG 1 is dealing with acceptance criteria and problems in helmet use while bicycling concerning conspicuity, thermal stress, ventilation deficits and other potential confounding. To analyze the helmet usage practice of bicyclists in Europe a questionnaire was developed in the scope of working group 1 to collect relevant information by means of a field study. The questionnaire consists of some 66 questions covering the fields of personal data of the cyclist, riding und helmet usage habits, information concerning the helmet model and the sensation of the helmet, as well as information on previous bicycle accidents. A second complementary study is conducted to analyze if the use of a bicycle helmet influences the seating geometry and the posture of cyclists when riding a bicycle and if the if the helmet vertically limits the vision. For this purpose cyclists with and without helmets were photographed in real world situations and relevant geometrical values such as the decline of the torso, the head posture of the upper vertical vision limit due to the helmet were established from the photos. The interim results of the field studies which were conducted in Germany by the Hannover Medical School are presented in this study. Some 227 questionnaires were filled out, of which 67 participants had used a helmet and 42 of the 227 participants have had a bicycle accident before. For the analysis of the riding position and posture of the cyclist over 40 pictures of riders with a helmet and over 240 pictures of riders without a helmet were measured concerning the seating geometry to describe the influence of using a bicycle helmet. Some results in summary: From the riders interviewed with the questionnaire only 11% of the city bike riders and 12% of the mountain bike riders always used the helmet, while 38% of the racing bike riders and 88% of the e-bike-riders always used the helmet. The helmet use seems not to change the sensation of safety of cycling compared to the use of a car. The arguments for not wearing a helmet are mostly stated to be the short distance of a trip, high temperatures or carelessness and waste of time. The reasons for using a helmet are stated to be the feeling of safety and being used to using a helmet. Being a role model for others was also stated to be a reason for helmet use. Concerning the sensation of the helmet 9% of the riders reported problems with the field of vision when using a helmet, 57% saw the problem of sweating too much, and 10% reported headaches or other unpleasant symptoms like pressure on the forehead when using the helmet. The analysis of the seating posture from the pictures taken of cyclists revealed that older cyclists generally have a riding position where the handle bar is higher than the seat (0-° to 10-° incline from seat to handlebar), while younger riders had a higher variance (between -10-° decline and 20-° incline). Further, elderly riders and riders with helmets seem to have a more upright position of the upper body when cycling. The vertical vision limit due to the helmet is determined by the front rim of the helmet (mostly the sun shade). Typical values here range from 0-° (horizontal line from the eye to the sun shade) to 75-° upwards, in which elderly riders tend to have a slightly higher vertical vision limit possibly due to the helmet being worn more towards the face.
Although the statistics show a decreasing rate of child injuries and fatalities in German road accidents more efforts can be made to protect children in cars e.g. by developing appropriate child restraint systems. An important part in of this work can be achieved with the help of crash tests using child dummies. However these crash tests cannot completely reflect the situation of real world crashes as factors like children moving out of the optimal position or children incorrectly fastened by their parents are difficult to predict. Therefore this study gives an overview over the current accident and injury situation of child occupants in cars in German road accidents.
Rural roads (highways) in Germany have to provide both high road safety and an appropriate level of service in accordance with their function in the road network. Single carriageway rural roads often underperform these expectations. An analysis of severe accidents on rural roads found two main contributing factors. First, high or inappropriate speed leads to accidents caused by the loss of control of the vehicle. Second, unsafe passing manoeuvres related to a misjudgement of sight distance, speed of oncoming vehicles or a misjudgement of the driver vehicle's acceleration capability. On the five roads where unsafe passing manoeuvres were a main contributing factor to accident occurrence, single short passing lanes (600 m to 1.2 km) were built to provide safe passing. On the remaining two-lane sections passing was prohibited by road signs and road marking. This paper investigates the effect of this design change on the accident situation and on traffic flow. The research project is based on a before/after comparison of traffic and accident data. Traffic volume, vehicle types and their velocities as well as the time gaps between the vehicles were recorded at different cross-sections. The result shows a significant improvement in road safety. This improvement was especially noted for severe head-on crashes, which were reduced to almost zero. The analysis of traffic flow on these roads pointed out that the chosen lengths of passing lanes were sufficient for safe passing and thereby reduced the need for dangerous driving behaviour. The recommendations of this research were fundamental for the determination of the design parameters of the second highest design class (EKL 2) in the new German Rural Road Design Guideline (RAL) published in spring 2013.
An increased use of bicycles comes along with an increased number of bicycle accidents. Bicycle accidents are more frequent than recorded by the police. To evaluate the real number of bicycle accidents during 12 months in Münster, Germany, injuries were collected by the Police and in each emergency unit anonymously. 2,153 patients had to be treated in a hospital, nearly triple the number of accidents that were registered by the police. Beside fractures of the upper extremities with major surgery, traumatic brain injuries were the leading cause for hospital admission. Bicycle helmet use can reduce traumatic brain injuries and the related number of deaths and hospital admissions. Laws on bicycle helmet might decrease the use of bicycles and therefore the reduction of positive health benefits. Other methods of accident prevention may lead to positive effects as helmet legislation as well, while having no reduction in bicycle use.
Sehvermögen von Pkw-Fahrern
(1989)
Im Rahmen einer polizeilichen Verkehrskontolle wurden Teilnehmer an einer Befragung und einem anonymen Sehtest gewonnen. Der Sehtest umfasste die Tagessehschärfe und die Dämmerungssehschärfe mit und ohne Blendeinwirkung. Im Fragebogen wurde nach Sehhilfen, der subjektiven Sehleistung, der letzten Sehkontrolle, der Jahreskilometerleistung und ihrem Anteil an Dunkelfahrten gefragt. Während die Mindestnormen, die für Führerscheininhaber an die zentrale Tagessehschärfe gestellt werden, von nahezu allen untersuchten Pkw-Fahrern erreicht wurden, fielen die Resultate für die Dämmerungssehschärfe schlechter aus. Ältere Pkw-Fahrer und Brillenträger schnitten schlechter ab als normalsehende. Die Befragung ergab, dass ein großer Teil sich in kürzeren Zeitabständen die Augen untersuchen lässt, unabhängig vom Alter und ob Brillenträger oder nicht. Diejenigen, die über eine schlechte Dämmerungssehschärfe verfügen, gaben an, signifikant seltener bei Dunkelheit zu fahren als diejenigen, die bei Nacht gut sehen können.
Es wird über ein Schulungsprogramm referiert, das von einer Expertengruppe entwickelt wurde und der Entdeckung von unter Drogen stehenden Kraftfahrern durch Polizeibeamte dient. Die Expertengruppe setzte sich aus Verkehrs- und Rechtsmedizinern, Toxikologen, Ärzten, Juristen und Polizeischulungsbeamten zusammen. Die Verbreitung des Schulungsprogramms wird über Multiplikatorenseminare und Praxisseminare erfolgen. Inhalte des Schulungsprogramms sind Epidemiologie, Rechtsfragen, Drogenwirkungen, Stoffkunde, Verdachtsgewinnung und Beweissicherung. Die Expertengruppe konzipierte einen Protokollbogen für polizeiliche Beobachtungen, die viele Punkte aus den bereits vorhandenen Protokollen zur Feststellung von Trunkenheitsfahrten enthalten. Zusätzlich sind Beobachtungen der Augenbindehäute, des Durchmessers und der Reaktion der Pupillen aufgeführt. Außerdem wird nach Änderungen des Verhaltens während der polizeilichen Maßnahme gefragt. In den Multiplikatorenseminaren geht es um die Ausbildung der Dozenten, die das gewonnene Wissen in Praxisseminaren an Kollegen weitergeben. Es wurden bereits Pilotveranstaltungen durchgeführt.
Es wird über ein Schulungsprogramm referiert, das von einer Expertengruppe entwickelt wurde und der Entdeckung von unter Drogen stehenden Kraftfahrern durch Polizeibeamte dient. Die Expertengruppe setzte sich aus Verkehrs- und Rechtsmedizinern, Toxikologen, Ärzten, Juristen und Polizeischulungsbeamten zusammen. Die Verbreitung des Schulungsprogramms wird über Multiplikatorenseminare und Praxisseminare erfolgen. Inhalte des Schulungsprogramms sind Epidemiologie, Rechtsfragen, Drogenwirkungen, Stoffkunde, Verdachtsgewinnung und Beweissicherung. Die Expertengruppe konzipierte einen Protokollbogen für polizeiliche Beobachtungen, die viele Punkte aus den bereits vorhandenen Protokollen zur Feststellung von Trunkenheitsfahrten enthalten. Zusätzlich sind Beobachtungen der Augenbindehäute, des Durchmessers und der Reaktion der Pupillen aufgeführt. Außerdem wird nach Änderungen des Verhaltens während der polizeilichen Maßnahme gefragt. In den Multiplikatorenseminaren geht es um die Ausbildung der Dozenten, die das gewonnene Wissen in Praxisseminaren an Kollegen weitergeben. Es wurden bereits Pilotveranstaltungen durchgeführt.
Since a number of human models have been developed it appears sensible to use these models also in the accident analysis. Especially the understanding of injury mechanisms and probably even injury risk curves can be significantly improved when interesting accidents are reconstructed using human body models. However, an important limitation for utilising human models for accident reconstruction is the effort needed to develop detailed FE models of the accident partners or to prepare the human model reconstruction by running physical accident reconstructions. The proposed approach for using human models for accident reconstruction is to use simplified and parametric car models. These models can be adapted to the crash opponents in a fast and cost effective way. Although, accuracy is less compared to detailed FE models, the relevant change in velocity can be simulated well, indicating that the computation of a detailed crash pulse is not needed. Two frontal impact test accidents that were reconstructed experimentally and using the parametric car models are indicating sufficient correlation of the adapted parametric car models with the full scale crash reconstructions. However, further developments of the parametric models to be capable for the use in lateral impacts and rear impacts are needed. For the PC Crash simulation runs the output sampling rate is too large to allow sufficient analysis. In addition the performance appears to be too general.
Within the process of integrating passenger airbags in the vehicle fleet a problem of compatibility between the passenger airbag and rear-facing child restraint systems was recognised. Especially in the US several accidents with children killed by the passenger airbag were recorded. Taking into account these accidents the deactivation of a present passenger airbag is mandatory if a child is carried in a rear-facing child restraint system at the front passenger seat in all member states of the European Union. This rule is in force since the deadline of 2003/20/EC at the latest. In the past a passenger airbag either could not be disabled or could only be disabled by a garage. Today there are a lot of different possibilities for the car driver himself to disable the airbag. Solutions like an on/off-switch or the automatic detection of a child restraint system are mentioned as an example. Taking into account the need for the deactivation of front passenger airbags two types of misuse can occur: transportation of an infant while the airbag is (still) enabled and transportation of an adult, while the airbag is disabled, respectively. Within a research project funded by BASt both options of misuse were analysed utilising two different types of surveys amongst users (field observations and interviews, Internet-questionnaires). In addition both analysis of accident data and crash tests for an updated assessment of the injury risk caused by the front passenger airbag were conducted. Both surveys indicate a low risk of misuse. Most of the misuse cases were observed in older cars, which offer no easy way to disable the airbag. For systems, which detect a child seat automatically, no misuse could be found. The majority of misuses in cars equipped with a manual switch were caused by reasons of oblivion. Also the accident analysis indicates a minor risk of misuse. From more than 300 cases of the GIDAS accident sample that were analysed, only 24 children were using the front passenger seat in cars equipped with a front passenger airbag. In most of these cases the airbag was deactivated. When misuse occurred the injury severity was low. However, when analysing German single accidents the fatality risk caused by the front passenger airbag became obvious. From the technical point of view, there were important changes in the design of passenger airbags in recent years. Not only volume and shape were modified, but also the mounting position of the entire airbag module was changed fundamentally. Even if these findings do not allow obtaining general conclusions, a clear tendency of less danger by airbags could be identified. For future vehicle development a safe combination of airbags and rear faced baby seats seems to be possible in the long term. This would mean that both types of misuse could be eliminated. For parents an easier use of child seat and car would be the result.
The share of high-tensile steel in car bodies has increased over the last years. While occupant safety has generally benefited from this measure, there is a potential risk that, as a result, rescue time may increase considerably. In more than 60% of all car occupant fatalities a technical rescue has been necessary. These are in particular those cases where occupants die immediately at the accident scene. Therefore, in these cases "rescue time" is a very sensitive parameter. In addition to the general analysis of the need of technical rescue and the actual rescue time depending on model years, the injury pattern of occupants requiring technical rescue will be analysed to provide advice for rescue teams. Furthermore, a detailed analysis of rescue measures for the most popular car models depending on the safety cell design is given.
For the assessment of vehicle safety in frontal collisions, the crash compatibility between the colliding vehicles is crucial. Compatibility compromises both the self protection and the partner protection properties of vehicles. For the accident data analysis, the CCIS (GB) and GIDAS (DE) in-depth data bases were used. Selection criteria were frontal car accidents with car in compliance with ECE R94. For this study belted adult occupants in the front seats sustaining MAIS 2+ injuries were studied. Following this analysis FIMCAR concluded that the following compatibility issues are relevant: - Poor structural interaction (especially low overlap and over/underriding) - Compartment strength - Frontal force mismatch with lower priority than poor structural interaction In addition injuries arising from the acceleration loading of the occupant are present in a significant portion of frontal crashes. Based on the findings of the accident analysis the aims that shall be addressed by the proposed assessment approach were defined and priorities were allocated to them. The aims and priorities shall help to decide on suitable test procedures and appropriate metrics. In general it is anticipated that a full overlap and off-set test procedure is the most appropriate set of tests to assess a vehicle- frontal impact self and partner protection.
When assessing the consequences of accidents normally the injury severity and the damage costs are considered. The injury severity is either expressed within the police categories (slight injury, severe injury or fatal injury) or the AIS code that rates the fatality risk of a given injury. Both injury metrics are assessing the consequences of the accident directly after the accident. However, not all consequences of accidents are visible directly after the accident and the duration of the consequences are different. Besides a physiological reduction of functionality social and psychological implications such as reduced mobility options, problems to continue the original job etc. are happening. In order to assess long term consequences of accidents the MHH Accident Research Unit established a brief questionnaire that is distributed to accident involved people of the Hannover subset of the GIDAS data set approx. one year after the accident beginning with the accident year 2013. The basic idea of using a brief questionnaire (in fact only one page) is to obtain a relatively large return rate because the questionnaire appears to be simple and quickly answered. This appears to be important because it is believed that the majority of accident involved people will not report long term consequences. In order to allow a more detailed survey amongst those responders that are reporting long term consequences they are asked for a written consent for the additional questionnaire that will be distributed at a time that is not yet defined. Long term consequences are reported for all addressed areas, medical, physiological, psychological and sociological by people without injuries, with minor injuries and with severe injuries.
This study examines the severity and types of injuries sustained by child pedestrians aged 18 years and below in order to identify the body regions at greatest risk for injury in a pedestrian accident. Detailed medical diagnoses were reviewed retrospectively for 572 child pedestrians admitted to an urban pediatric trauma center with injuries during the time period from January 2001 to December 2005. Eighty percent of these children sustained AIS 2 or greater injuries, most commonly to the lower extremity (41%) and head (34%). Fortyfour percent of admitted children had more significant AIS 3 or greater injuries primarily to the head (58%), thorax (17%) and lower extremities (14%). Testing procedures to assess the child- interaction with the motor vehicle should include injury assessment for the pediatric head, thorax and lower extremities. This understanding of how child pedestrians interact with motor vehicles may provide insight into effective countermeasures with potential for implementation in vehicle designs world-wide.
Tempered road system
(2014)
The road performance is strongly influenced by climatic conditions. Winter conditions have massive impact on traffic security but also pavement lifetime decreases as an effect of temperature variation during wintertime and summertime. Heating and cooling of a pavement is a possibility to work against these impacts. To discuss the boundary conditions for an efficient construction and operation of a tempered road system a feasibility study has been made. The study shows the feasibility and identifies thermal energy buffering as a main challenge. When thinking of a fully regenerative operation of a large tempered road system (e.g. 20.000 m-²) the storage volume has to be too large for an economic and structurally engineered satisfactory solution. However, the location dependent usage of natural geothermal storage possibilities and as well smart alignment and construction promises a feasibility realization.
A study on knowledge and practices of first aid and CPR among police officers in Colombo and Gampaha
(2017)
Around 85% of deaths in developing countries have been found to be due to road traffic accidents (RTAs), which cost the countries around 1-2% of their gross national product (GNP). In Sri Lanka there were 2,436 deaths reported from 36,045 RTAs in 2014. This study aimed at assessing first aid and cardiopulmonary resuscitation (CPR) knowledge among police officers and identifying its relationship to their first aid and CPR practices. A study was done on 493 police officers from Colombo and Gampaha who were selected using convenience sampling through a self-administered questionnaire. The results showed that the police officers had unsatisfactory knowledge and practices of CPR and interventions for bleeding and fractures. These should therefore be focused in their further training.
The European Enhanced Vehicle-safety Committee wants to promote the use of more biofidelic child dummies and biomechanical based tolerance limits in regulatory and consumer testing. This study has investigated the feasibility and potential impact of Q-dummies and new injury criteria for child restraint system assessment in frontal impact. European accident statistics have been reviewed for all ECE-R44 CRS groups. For frontal impact, injury measures are recommended for the head, neck, chest and abdomen. Priority of body segment protection depends on the ECE-R44 group. The Q-dummy family is able to reflect these injuries, because of its biofidelity performance and measurement capabilities for these body segments. Currently, the Q0, Q1, Q1.5, Q3 and Q6 are available representing children of 0, 1, 1.5, 3 and 6 years old. These Q-dummies cover almost all dummy weight groups as defined in ECE-R44. Q10, representing a 10 year-old child, is under development. New child dummy injury criteria are under discussion in EEVC WG12. Therefore, the ECE-R44 criteria are assessed by comparing the existing P-dummies and new Q-dummies in ECE-R44 frontal impact sled tests. In total 300 tests covering 30 CRSs of almost all existing child seat categories are performed by 11 European organizations. From this benchmark study, it is concluded that the performance of the Q-dummy family is good with respect to repeatability of the measurement signals and the durability of the dummies. Applying ECE-R44 criteria, the first impression is that results for P- and Q-dummy are similar. For child seat evaluation the potential merits of the Q-dummy family lie in the extra measurement possibilities of these dummies and in the more biofidelic response.
Accidents with vulnerable road users require special attention within the road safety work because these accidents are often accompanied with severe injuries. Thus In 2006 at least 6200 Powered Two Wheeler (PTW) riders were killed in road crashes in the EU 25 representing 16% of the total number of road deaths while accounting for only 2% of the total kilometers driven. For the prevention of accidents with VRU above all the knowledge of the causes of the accidents is of special importance. This study is based on the methodology of the German In-Depth Accident Study GIDAS. Within GIDAS extensive data on various fields of accidentology are collected on-scene from road traffic accidents with injuries in the Hannover and Dresden area. Using a well defined sample plan the collected data is highly representative to the whole German situation (Brühning et al, Otte et al). The need of in-depth accident causation data in accident research led to the development of a special tool for the collection of such data called ACASS (Accident Causation Analysis with Seven Steps), which was implemented in the GIDAS methodology in 2008 and described by Otte in 2009.
Das Führen von Kraftfahrzeugen der Klasse 2 ist entsprechend der Fahrerlaubnisverordnung nach mehr als zwei epileptischen Anfällen ausgeschlossen. Als Ausnahme gilt eine durch ärztliche Kontrolle nachgewiesene fünfjährige Anfallsfreiheit ohne antiepileptische Behandlung. Im vorliegenden Fall wies ein Lkw-Fahrer mindestens vier epileptische Anfälle auf, eine fünfjaehrige Anfallsfreiheit ohne Medikamente unter ärztlicher Kontrolle ließ sich nicht feststellen. Der letzte Anfall führte zu einem Verkehrsunfall mit anschließendem Gerichtsverfahren. Ursächlich für den Unfall war am ehesten die abgesetzte Medikation. Ein Verfahren hinsichtlich der Ungeeignetheit zum Führen von Kraftfahrzeugen der Klasse 2 wurde eingeleitet.
Since integrated safety systems combine active and passive safety elements in one safety system, it is necessary to define new procedures to evaluate vehicle safety from the overall system point of view. The main goal of the ASSESS project is to develop harmonized and standardized assessment procedures for collision mitigation and avoidance systems. Methods and Data Sources: In ASSESS, procedures are developed for: driver behaviour evaluation, pre-crash system performance evaluation, crash performance evaluation, socio-economic assessment. This paper will concentrate on the activities related to the crash evaluation. The objective is to perform simulations, sled tests and crash tests in order tounderstand the influence of the activation of the pre-crash systems on the occupants" injuries during the crash phase. When a traffic accident is unavoidable, pre-crash systems work on various safety devices in order to improve the vehicle occupants" protection. Braking assistance and adaptive restraint systems are the main pre-crash systems whose effect on the occupants" protection will be described in this paper. Results: The results will be a description of the effect of the activation of the pre-crash systems on the crash phase. Additionally, a set of recommendations for future methodology developments will be delivered. Furthermore, a first approach to the study of the effect of the pre-crash systems activation on the occupants" protection when the impact is unavoidable will be presented. This effect will be quantified using the biomechanical values obtained from the simulation and testing activities and their related injury risks. Simulation and testing activities will consider the following scenarios: - No activation of any pre-crash system, - Activation of one or a combination of several pre-crash systems. In this way, differences in the results obtained from different scenarios will show the effect of each pre-crash system separately during the crash phase. Discussion and Limitations: The set of activities developed in this research project is limited by the fact that with the given resources only a limited number of vehicle models could be investigated. In addition, there are also limitations related to the injury risk curves and the passive safety tools currently on the market. Conclusion and Relevance to session submitted: The paper will present a complete analysis of the effect of pre-crash systems during the crash phase when the impact is unavoidable. Details, limitations and first application experience based on a few examples will be discussed. Currently, there is not any regulation, assessment program, or other similar official procedure able to assess pre-crash systems during the crash phase. This project comprises phases of traffic accidents which have been historically analysed separately, and aims to evaluate them taking into account their interrelationship. ASSESS is one of the first European projects which deals in depth with the concept of integrated safety, defining methodologies to analyse vehicle safety from a global point of view.
As investigations by BASt have shown, a bond between concrete surfaces and bases may be a disadvantage when water penetrates via joints and from the sides if the bond becomes partially detached at an early stage. Free water may penetrate into the area between the concrete surface and the base and build up in areas where the bond is still intact. The high pressure caused by lorry wheels rolling over the pavement causes hydrodynamic pumping. This creates very high flow speeds with considerable corrosion power. This results in the base course surface being eroded in the areas where heavy vehicles drive over the road and may even lead to water and fine particles from the base courses being expelled through the longitudinal joints between the pavement slab and the lower hard shoulder or first overtaking lane. The erosion of the base leads unavoidably to the bearing conditions deteriorating and increased loading of the concrete surface. Cracks may occur and, later stepping-off and tilting of the plates components. This significantly deteriorates the evenness and consequently the service value of the road. This finally leads to a reduction in the service life of the concrete surface. To avoid such damage water which has penetrated must be able to lose pressure and to then seep away. A possible solution is: A nonwoven fabric substance between concrete suface and bound base course. This construction method has proved himselve on numerous test road sections and were rightly included in the new Codes of Practice for the Standardisation of the Upper Structure of Traffic-Bearing Surfaces (Richtlinien für die Standardisierung des Oberbaues von Verkehrsflächen- RStO).
Das Unfallrisiko junger Fahrer - Bestandsaufnahme und Überlegungen zu wirksamen Gegenmaßnahmen
(2010)
Junge Fahrer - vor allem männlichen Geschlechts - haben ein überdurchschnittlich hohes Unfallrisiko. Der Straßenverkehrsunfall ist Todesursache Nummer eins für Jugendliche. Sie haben unter der Bevölkerung den größten Anteil an verlorenen Lebensjahren. Besonders gefährdet sind Motorradfahrer. An Wochenenden und nachts ist die Unfallwahrscheinlichkeit und -häufigkeit extrem. Auch in Ländern, die hohe Anstrengungen unternehmen, um die Sicherheit im Straßenverkehr zu erhöhen und insgesamt erfolgreich sind, zeigt sich, dass die 18- bis 24-Jährigen häufiger verunfallen als die übrigen Verkehrsteilnehmer und schwerere Folgen davontragen. Die jugendliche Persönlichkeit hat einen prädominanten Einfluss auf das Fahrverhalten. Hintergründe dafür sind die hohe Risikobereitschaft, das Spannungs- und Reizbedürfnis, der Wunsch, Grenzen auszuloten sowie Gruppeneinflüsse oder Renommierverhalten. Daneben spielt allerdings auch die geringe Erfahrung eine Rolle, die zu dreierlei Problemen führen kann: - Neulenker sehen oft die Gefahr nicht, in welcher sie sich befinden, oder - sie unterschätzen die wahrgenommene Gefahr,oder - sie ueberschätzen ihre Fahrkunst und glauben, die Gefahr meistern zu können. In den letzten Jahren wurden in verschiedenen Ländern jedoch auch Fortschritte erzielt. Empfehlenswerte Maßnahmen ergeben sich bei der Ausbildung, wo neue Methoden angewandt werden, eine zweite Phase eingeführt wurde, spezielle Kampagnen konzipiert werden oder fahrzeugtechnische Modifikationen veranlasst wurden. Auch die Nachschulung für junge Lenker, wo nötig, zeitigt Wirkung. Weitere Anstrengungen sind je nach Land oder Region notwendig, insbesondere hinsichtlich der Hauptursachen für schwere Unfälle: Geschwindigkeit, Alkohol und Nicht-Anlegen des Sicherheitsgurtes. Hier lassen sich besondere Maßnahmen für Neulenker vorsehen. Daneben müssen gesellschaftliche Einflüsse, etwa die Wirkung der Automobilwerbung und -berichterstattung auf Jugendliche, berücksichtigt werden.
Zum besseren Verständnis der Hirnleistungsanforderungen an das Autofahren wird ein Theorie-Modell erörtert, das aus folgenden drei Stufen in einer Hierarchie besteht: Die oberste Ebene ist die strategische Ebene, die mittlere die taktische und die untere die operationale Ebene. Bezogen auf den Straßenverkehr gehört zu den Entscheidungen auf strategischer Ebene beispielsweise die Überlegung, ob man überhaupt das Auto nehmen muss oder nicht. Hierzu gehört auch die Überlegung, ob man sich grundsätzlich an Geschwindigkeitsbegrenzungen halten will. Charakteristisch für strategische Entscheigungen ist, dass sie prinzipiell getroffen werden, bevor sie in konkretes Handeln umgesetzt werden. Bei den taktischen Entscheidungen geht es ausschließlich um eigenes initiatives Handeln aus der Person selbst heraus ohne äußeren Zwang oder Veranlassung (beispielsweise Überholmanöver, Abbiegen). Zu den operationalen Entscheidungen gehört jedes Reagieren auf äußere Erfordernisse (Beachten von Ampeln und sonstigen Verkehrszeichen, erzwungene Lenk- oder Bremsmanöver). Die meisten neuropsychologischen Untersuchungen beziehungsweise Tests prüfen die operationale Entscheidungsebene. Für die beiden höheren Ebenen ist eine Beurteilung nur möglich, wenn eine entsprechende Beurteilungsgrundlage vorhanden ist oder herangezogen werden kann (zum Beispiel eine praktische Fahrprobe). Die geistigen Fähigkeiten eines Menschen lassen sich ebenfalls in eine dreistufige Hierarchie gliedern: Die unterste Ebene umfasst Hirnleistungen wie Wahrnehmung, Aufmerksamkeit, Sprache, Denken und anderes mehr. Die mittlere Ebene wird konstituiert durch Ziele-Auswahl, Vorplanung, Antizipation als geistige Vorwegnahme der Handlungskonsequenz. Die höchste Hirnfunktion ist die objektive selbstreferenzielle Bewertung, die sich auf Vergangenheit, Gegenwart und Zukunft erstrecken kann.
There is a need for detecting characteristics of pedestrian movement before car-pedestrian collisions to trigger a fully reversible pedestrian protection system. For this purpose, a pedestrian sensor system has been developed. In order to evaluate the effectiveness of the sensor system, the in-depth knowledge of car-pedestrian impact scenarios is needed. This study aims at the evaluation of the sensor system. The accident data are selected from the STRADA database. The accident scenarios available in this database were evaluated and the knowledge of the most common scenarios was developed in terms of the pedestrian trajectory, the pedestrian speed, the car trajectory, the car velocity, etc. A mathematical model was then established to evaluate the sensor system with different detective angles. It was found that in order to detect all the pedestrians in the most common scenarios on time the sensor detective angle must be kept larger than 60 degrees.
Nowadays human-created systems are increasing in complexity due to the interaction of humans and technology. Especially road traffic systems are composed of multitudinous resources (e.g. personnel, vehicles, organizations, etc.), which make it even harder to anticipate the positive and negative effects on safety. One key in achieving a significant reduction of fatalities is seen in driver assistant systems counterbalancing the lack of drivers' capabilities. But the actual outcome of implementing these sophisticated technologies especially on influencing driver's capabilities are yet unknown. Latest research exemplifies an increase of reaction times of drivers in case of dysfunctional driver assistant systems. This research paper applies STAMP/STPA (STAMP = systems-theoretic accident model and processes; STPA = systems-theoretic process analysis) to the German automobile traffic system focusing on the effects of driver assistant systems on drivers. By doing so, the potential hazards caused by technology can be identified.
The proportion of older road users is increasing because of demographic change (in the group 65+ from current 18% to about 24% by 2030). The mobility needs of people 65+ often differ from those of younger people. Seniors (65+) are already more involved in fatal accidents than younger road users. According to the age development, the senior share of road deaths in the EU of today is increasing nearly one-fifth to one-third. From the in-depth analysis of accidents generic simulation models were developed. Attention has been paid both to psycho-physical characteristics as well as on the social and physical environment and their specifics in conjunction with seniors. By simulating the defined scenarios and varying the defined relevant parameters, accident influencing factors were examined as a basis for avoidance. In addition, the parameters were varied to show the influence from the vehicle, the pedestrian and the infrastructure to avoid the accident or to characterize the conditions for which the accident is inevitable.
In a first step, we have examined approximately 23 000 single vehicle accidents within the Austrian National Statistics database. In a second step, we considered 15% of all fatal "running off the road" accidents that occurred in Austria in 2003. As a result, two accident categories were specified; "leaving the road without preceding manoeuvre" and "leaving the road with preceding manoeuvre". These two categories can be basically characterised by the vehicle- heading angle and its velocity angle. In this report, we further suggest theoretical approaches for the dimensioning of a safety zone, an area adjacent to the road free of fixed objects or dangerous slopes. We also show the link between the two accident categories mentioned above and the real world accidents analysed in detail. These observations also form the basis for the required length for safety devices. Finally, we summarise accident avoidance strategies.
The objective of this study was to identify aspects of the individual experience and behaviour of drivers in intersection accidents. A total of 40 accident drivers sketched their ideas and expectations relating to intersection assistance using the method of Structure Formation Technique. Using this method prepared content cards and relation cards for a subject matter are formed together in a structure through the application of an explicit set of rules. The structures generated in this process were compared with the structures of 20 control persons who have not recently experienced an accident at intersections. The basis for this comparison was a case-control design with matched samples regarding the variables age, sex, education, occupation, driving experience and annual mileage. The results of the accident reports indicate that additional assistance is instrumental in the perception of other road users. Generally the interviewed drivers were open-minded towards the use of intersection assistance systems. Drivers who have recently experienced an accident at intersections significantly more often approved of warning assistance in their vehicle than drivers who have not recently experienced an accident. Further accident experienced drivers favoured warning and information via audio warning more frequently. The ideas of the drivers were strongly shaped by the experiences with already available advanced driver assistance systems. Hence acoustic and visual warnings were generally preferred to tactile warnings. The findings also indicate a relationship between the variable age and the acceptance of automatic vehicle intervention, and the suggestion of a head up display as a configuration of a visual warning system.
Airbags are, together with the three-point belt, the most effective passive safety equipment of vehicles. However, literature shows that sound pressure levels of up to 170 dB can occur during airbag deployment. A literature review revealed no systematic experimental data on possible hearing loss by airbag deployment, that also takes any other crash accompanied noise into account, such as deformation and impact noise. Also the rising number of airbags per vehicle resulting in a higher number of deployed airbags in an accident was not addressed with respect to hearing loss. Thus, an extensive test matrix of noise measurements during airbag deployments was conducted including onboard measuring during crashes and static measurements. Dynamic and static experiments with single and multiple airbag deployments were conducted. The results of this study show, that in the analyzed crash constellations the acoustic emission of the collision as well as the car deformation can trigger the stapedius reflex before the airbag deployment. The stapedius reflex protects the inner ear at least partially in case of dangerous sound levels. However, it seems that multiple airbag deployments in a short sequence pose a considerable risk for hearing impairments despite the fully contracted stapedius muscle. Further and in line with Price et al. (2013) it was found that the risk of hearing loss is lower with closed windows. The analysis of patient and accident data showed no link between airbag deployment and hearing loss. This might be caused by low case numbers of reported hearing loss problems up to now. In conclusion the results show that a singular analysis of the sound pressure of airbag deployments without crash accompanied noises is not sufficient as the protective effect of the stapedius reflex is neglected. Still, successive airbag deployments in a short timeframe raise the risk of hearing loss. Further investigation on hearing impairment due to airbag deployment and triggering of the stapedius reflex is needed and the data acquisition of accidents and patients should consider hearing loss aspects.
Systematik zur Bewertung der Auswirkungen von Sicherheitseinrichtungen im Kraftfahrzeug (BASE)
(2000)
BASE kann als eine Art "Guide" zur Unterstützung im Prozess der Evaluation von Informations- und Sicherheitseinrichtungen (ISE) in Hinblick auf psychologische Auswirkungen eingesetzt werden. Es ist in Bewertungsbereiche gegliedert, die ihrerseits wiederum den verschiedenen Phasen der Marktdurchdringung zugeordnet sind: (1) Phase vor der eigentlichen Nutzung, (2) Phase der Nutzung und (3) Phase nach vorangeschrittener Diffusion der neuen Technologie. Für die Entwicklung von Informations- und Sicherheitseinrichtungen im Fahrzeug ist es erforderlich, die Sicherheitsanforderungen an solche Einrichtungen zu definieren. Hier stellt das vorliegende Bewertungssystem BASE einen umfassenden Rahmen dar. Ebenso lässt es sich zur Bewertung bereits bestehender Einrichtungen heranziehen. Dabei stehen neben den sensorischen, kognitiven, motivationalen, affektiven und verhaltensbezogenen Reaktionen einer Person auch die Auswirkungen der ISE auf die Sicherheit des Verkehrssystems zur Bewertung an. In diesem Zusammenhang werden der Prozess der reaktiven Verhaltensanpassung und der Marktdurchdringung als Einflussfaktoren auf die Verkehrssicherheit diskutiert.
Innovative Zugangstechniken und digitale Bildauswertung für die Bauwerksprüfung im Zuge von Straßen
(2019)
Deutschland braucht ein zuverlässiges Straßenverkehrssystem. Dafür müssen die Zustände der Brücken und sonstigen Ingenieurbauwerke der Straßen kontinuierlich und umfassend bekannt um rechtzeitig handeln zu können. Neben der regulären visuellen Bauwerksprüfung nach DIN 1076 bieten neue innovative Verfahren große Möglichkeiten der Zugangs- sowie Bilderfassungs- und Bildverarbeitungstechnik. Diese Möglichkeiten gilt es jetzt systematisch zu erkunden und für den Einsatz aufzubereiten
Die Infrastruktur und hierbei vor allen die Straßen, stellen eine grundlegende Voraussetzung zur wirtschaftlichen Entwicklung eines Landes dar. Dieses bedeutet einerseits eine Notwendigkeit der Anpassung an zunehmenden Verkehr durch Um- und Ausbauten des Straßennetzes. Andererseits bestehen viele Netze, vor allem in den Industrienationen, schon eine geraume Zeit und sind somit dem Verkehr und weiteren äußeren Einflüssen ausgesetzt. Dieses führt dazu, dass da Thema "Erhaltung der Infrastruktur" verstärkt in das Bewusstsein der handelnden Personen und Organisationen gelangen muss. Bei der Erhaltung der Straßeninfrastruktur sind neben technischen auch rechtliche Aspekte von erheblicher Bedeutung. Die Planung, der Bau und die Unterhaltung von Straßen mit allen zugehörigen Straßenbestandteilen werden aus öffentlichen Mitteln finanziert. Somit sind hierbei die Grundsätze der Wirtschaftlichkeit und Sparsamkeit zu beachten. Hierfür kann die Bauwerksprüfung wichtige Informationen zu Konstruktion, Schäden und Schadensveränderungen liefern. Daneben gibt es aber auch die sogenannte allgemeine Verkehrssicherungspflicht. D.h. dass derjenige, der eine Gefahrenquelle schafft oder unterhält, die Pflicht hat, die notwendigen und zumutbaren Vorkehrungen zu treffen um Schäden anderer zu verhindern. Vor diesem Hintergrund und da die DIN 1076 für ihren Bereich als allgemein anerkannte Regel der Technik angesehen werden kann, ist diese Norm auch für diejenigen Bauträger als verbindlich anzusehen, die diese nicht explizit eingeführt haben.
Nach grundsätzlichen Einführungsüberlegungen wird zunächst die Frage der Akzeptanz und die Notwendigkeit, bei der Entwicklung und Erprobung von Maßnahmen, Vertreter der Erziehungsinstanzen möglichst frühzeitig und umfassend zu beteiligen, angesprochen. Diese Forderung einer engen Abstimmung und Zusammenarbeit von Forschungspraxis, Umsetzungspraxis und Erziehungspraxis gilt auch für die Entwicklung, die Erprobung, die Umsetzung, die anschließenden Wirksamkeitskontrollen, die Interpretation der Ergebnisse und die Auswahl der die weitere Umsetzung korrigierenden Informationen. Im folgenden werden zwei weitere wichtige Wirksamkeitsbedingungen ausführlicher behandelt: die Entwicklungsorientierung und der Situationsbezug, d.h. die Orientierung der Maßnahme an der Umgebung des Kindes, die als konkrete Verkehrswirklichkeit den Raum bildet, in dem das Kind lebt und aufwächst. Als konkrete Beispiele für das ineinandergreifen deduktiv theoretischer Ableitungen und praktischer Erfahrungen bei der Entwicklung von verkehrspädagogischen Maßnahmen werden das Programm "Kind und Verkehr", der Kinderverkehrsclub, das Entwicklungsprojekt "Verkehrserziehung im Kindergarten" erwähnt. Als mehr formale Bedingungen, die für die Wirksamkeit einer Maßnahme wichtig sind, werden deren Kontinuität, aber auch grundsätzliche Veränderbarkeit herausgearbeitet.
Ausgehend von der negativen Entwicklung der Statistik von Unfällen, bei denen Kinder als Radfahrer verletzt werden, diskutiert der Autor Maßnahmen, die die Sicherheit dieser Verkehrsteilnehmergruppe erhöhen können. Der Autor geht in seinen Betrachtungen auf folgende Felder ein: Erziehung und Aufklärung im schulischen und außerschulischen Sektor, Verkehrsüberwachung für den fließenden und ruhenden Verkehr unter besonderer Berücksichtigung zugeparkter Gehwege, Radwege und anderer Verkehrsflächen, Gesetzgebung und Rechtsprechung, Konstruktion von Kinderfahrrädern, politische und Verwaltungsentscheidungen auf allen Ebenen, Kauf und Verkauf von Kinderfahrrädern, Darstellung der Gefährdung von radfahrenden Kindern in den Medien sowie Anstrengungen von Wissenschaft und Forschung.
Nach grundsätzlichen Einführungsüberlegungen wird zunächst die Frage der Akzeptanz und die Notwendigkeit, bei der Entwicklung und Erprobung von Maßnahmen, Vertreter der Erziehungsinstanzen möglichst frühzeitig und umfassend zu beteiligen, angesprochen. Diese Forderung einer engen Abstimmung und Zusammenarbeit von Forschungspraxis, Umsetzungspraxis und Erziehungspraxis gilt auch für die Entwicklung, die Erprobung, die Umsetzung, die anschließenden Wirksamkeitskontrollen, die Interpretation der Ergebnisse und die Auswahl der die weitere Umsetzung korrigierenden Informationen. Im folgenden werden zwei weitere wichtige Wirksamkeitsbedingungen ausführlicher behandelt: die Entwicklungsorientierung und der Situationsbezug, d.h. die Orientierung der Maßnahme an der Umgebung des Kindes, die als konkrete Verkehrswirklichkeit den Raum bildet, in dem das Kind lebt und aufwächst. Als konkrete Beispiele für das ineinandergreifen deduktiv theoretischer Ableitungen und praktischer Erfahrungen bei der Entwicklung von verkehrspädagogischen Maßnahmen werden das Programm "Kind und Verkehr", der Kinder-Verkehrs-Club, das Entwicklungsprojekt "Verkehrserziehung im Kindergarten" erwähnt. Als mehr formale Bedingungen, die für die Wirksamkeit einer Maßnahme wichtig sind, werden deren Kontinuität, aber auch grundsätzliche Veränderbarkeit herausgearbeitet.
Bitumen ist ein Erdölprodukt mit einer komplexen chemischen Zusammensetzung. Durch die Auswahl der zur Herstellung verwendeten Rohöle und die Art des Raffinerieprozesses werden die Zusammensetzung und die resultierenden chemisch-physikalischen Eigenschaften bestimmt. Für die Untersuchung von Bitumen steht heute eine Vielzahl von leistungsfähigen Methoden der modernen instrumentellen Analytik zur Verfügung. Das Hauptproblem bei der Analyse von Bitumen besteht in der Auftrennung des Stoffgemisches. Chromatographische Verfahren bieten generell die besten Voraussetzungen derartige Trennaufgaben zu bewältigen. So ermöglicht die TLC-FID-Methode die quantitative Bestimmung der Stoffgruppen der Aliphaten, Aromaten, Harze und Asphaltene. Dagegen ermöglicht die klassische Dünnschichtchromatographie, die in der Vergangenheit ausschließlich zum Nachweis von teerhaltigen Bindemitteln eingesetzt wurde, eine einfache und schnelle Möglichkeit eine chemische Charakterisierung von Bitumen in Form eines "Fingerprints" vorzunehmen. Dem Anspruch eine möglichst exakte und vollständige Beschreibung der chemischen Zusammensetzung von Bitumen zu erhalten, stehen Begrenzungen hinsichtlich der Wirtschaftlichkeit und Schnelligkeit der Verfahren gegenüber. Dennoch ist es möglich, mit einem relativ begrenzten Aufwand wertvolle Informationen über die chemische Beschaffenheit zu erhalten.
The case study "Digital Test Area Autobahn" is presented. A new built (September 2016) pre-stressed concrete bridge is equipped with different monitoring systems for the detection of traffic load, climatic influence and the reaction of the bridge. Possibilities for the implementation of a VoI (Value of Information) analyses are presented.
This study investigates the protection offered by passive head-restraints with different stiffness and energy dissipation properties. For this purpose, computational multi-body models of a generic car seat and a biofidelic 50thpercentile male human for rear impact are used to study different seat designs and passive head-restraints. The validated seat-occupant model is also used in the design of two different car-seat models which are shown to effectively mitigate whiplash by utilising a crash-energy distribution technique. Five different passive head-restraints with varying stiffness (low-medium-high) and energy dissipation percentages (low-high) are successively attached to four different car-seat models. The simulation results indicate that the protection offered by head restraints is strongly dependent on the seat design. It has also been shown that the stiffness of the passive head-restraint has much more influence on whiplash-risk in comparison to its energy dissipation capacity.
In road traffic accidents, a car-seat and its occupant can be subjected to various crash pulses in the case of a rear impact. This study investigates the influence of crash pulse shape on seat-occupant response and evaluates the corresponding risk of whiplash injury. For this purpose, a rigorously validated seat-occupant system model is used to study different carseat designs and crash pulses. Two different car-seat concepts are also presented which can effectively mitigate whiplash injury for a wide range of crash severity. It is shown that for crash pulses of similar severity, the level of whiplash-risk depends strongly on the combined effects of seat design and crash pulse shape.
Die Europäischen Normen für Erdarbeiten werden im CEN/TC 396 "Earthworks" erarbeitet. Das Sekretariat des CEN/TC 396 wird vom französischen Normungsinstitut AFNOR gehalten. Die Normungsarbeit wird im DIN-Ausschuss NA 005-05-22 AA "Erdarbeiten (SpA zu CEN/TC 396), Gemeinschaftsausschuss mit FGSV GA 5.01" gespiegelt. Vertreter des Spiegelausschusses arbeiten in den verschiedenen Arbeitsgruppen (Working Groups (WG)) des CEN/TC 396 mit. In den Jahren 2009 und 2010 wurden die Gremien konstituiert und mit der Normungsarbeit begonnen, zunächst überwiegend durch die Zusammenstellung der vorhandenen Regelungen in den Mitgliedsstaaten (siehe auch Beitrag Vogel/Leister/Heyer zur Erd- und Grundbautagung 2013). Im November 2014 wurden vom CEN/TC 396 die Arbeitsaufträge ("work items") offiziell gestartet.
Die Europäischen Normen für Erdarbeiten werden im CEN/TC 396 "Earthworks" erarbeitet. Das Sekretariat des CEN/TC 396 wird vom französischen Normungsinstitut AFNOR gehalten. Die Normungsarbeit wird im DIN-Ausschuss NA 005-05-22 AA "Erdarbeiten (SpA zu CEN/TC 396), Gemeinschaftsausschuss mit FGSV GA 5.01" gespiegelt. Vertreter des Spiegelausschussesarbeiten in den verschiedenen Arbeitsgruppen (working groups (WG)) des CEN/TC 396 mit. In den Jahren 2009 und 2010 wurden die Gremien konstituiert und mit der Normungsarbeit begonnen, zunächst überwiegend durch die Zusammenstellung der vorhandenen Regelungen in den Mitgliedsstaaten (siehe auch Beitrag Vogel/Leister/Heyer zur Erd- und Grundbautagung 2013). Im November 2014 wurden vom CEN/TC 396 die Arbeitsaufträge("work items") offiziell gestartet.
Bankette dienen im Wesentlichen der Verkehrssicherheit und dem Schadstoffrückhalt. Sie müssen dauerhaft standfest sein, damit abkommende Fahrzeuge, insbesondere schwere Lkw, nicht einsinken und verunfallen. Zum Grundwasserschutz müssen sie aber auch die Schadstoffe aus dem Straßenabfluss, der im Bankett versickert, zurückhalten. Der Schadstoffrückhalt im Bankett erfolgt vorwiegend durch mechanische Filtration. Diese wird vor allem durch die sandigen und schluffigen Kornfraktionen im Bankettmaterial bewirkt. Ist ihr Anteil aber zu hoch, nehmen die Standfestigkeit und die Tragfähigkeit ab. Es gilt, diese gegenläufigen Anforderungen an die Zusammensetzung von Bankettmaterial zu optimieren. Die Untersuchungsansätze und erste Ergebnisse der dazu beauftragten Forschung werden im Beitrag vorgestellt. Mit den Feinpartikeln aus dem Straßenabfluss und der Vegetation "wachsen" Bankette im Laufe der Jahre auf. Damit der Straßenabfluss nicht behindert wird und Aquaplaning auftritt, müssen Bankette regelmäßig geschält werden. Das bei dieser Reprofilierung anfallende Bankettschälgut ist grundsätzlich als Abfall einzustufen. Die dadurch bedingten Einschränkungen bei der Verwendung oder Verwertung sind in der "Richtlinie zum Umgang mit Bankettschälgut" beschrieben. Die dort aufgezeigten Möglichkeiten werden vorgestellt. Wenn das Bankettschälgut nicht innerhalb des Straßenbauwerks verbleiben kann, sollte es im Sinne der Ressourcenschonung verwertet werden. Bankettschälgut besteht zu circa 90 Masse-Prozent aus mineralischen Bestandteilen, die wieder für Bauzwecke genutzt werden können, wenn es durch eine geeignete Aufbereitung gelingt, die überwiegend pflanzlichen Anteile (Mähgutreste und Wurzeln) deutlich zu reduzieren. Aus einer Forschungsarbeit zu Kosten und Nutzen der Aufbereitung von Bankettschälgut werden der derzeitige Stand dargestellt und Perspektiven für eine werterhaltende Nutzung von Bankettschälgut aufgezeigt.
Es ist Tradition in der Forschungsgesellschaft, an den Anfang von Arbeitsgruppentagungen den Tätigkeitsbericht des Arbeitsgruppenleiters zu stellen. Die Tätigkeiten im Berichtszeitraum zwischen 2010 und 2013 spiegeln sich in den Vorträgen über Ergebnisse und abgeschlossene Aktivitäten wider. Der Bericht ist deshalb auf Veränderungen und Entwicklungen fokussiert, die seit der Erd- und Grundbautagung 2010 stattgefunden haben. Das betrifft organisatorische und personelle Veränderungen in der Arbeitsgruppe, laufende und geplante Forschungsvorhaben und Regelwerke. Bei den vielfältigen Themen und Aufgaben der Arbeitsgruppe werden für weitergehende Informationen die nachfolgenden Beiträge der Tagung 2013 und die Road Maps und Steckbriefe der Gremien auf der Internetseite der FGSV empfohlen.
Die Länderarbeitsgemeinschaften Bodenschutz (LABO), Abfall (LAGA) und Wasser (LAWA) haben im September 2005 das Bundesumweltministerium gebeten, bundeseinheitliche, rechtsverbindliche Anforderungen an die Verwertung von mineralischen Abfällen in technischen Bauwerken und in bodenähnlichen Anwendungen zu regeln. Die Umweltministerien der Länder haben in ihren Stellungnahmen zum 2. Arbeitsentwurf der Mantelverordnung Forderungen gestellt, bei deren Umsetzung der Einsatz von mineralischen Ersatzbaustoffen im Verkehrswegebau stark eingeschränkt und unwirtschaftlich würde. Der Wille zur Schonung natürlicher Ressourcen ist nicht erkennbar. Anforderungen an Straßenbauwerke, an den Umweltschutz und an die Kreislaufwirtschaft konkurrieren in vielen Bereichen miteinander. Im Gesetzgebungsverfahren sind bisher trotz Gesprächen zwischen den Ressorts auf Arbeitsebene in grundlegenden Aspekten keine Einigung oder von Allen tragbare Kompromisse erzielt worden. Der Verkehrswegebau ist Hauptabnehmer der Ersatzbaustoffe, geht mit großen Mengen des Primärbaustoffs "Boden" um, ist aber auch "Abfallerzeuger". In der Mantelverordnung werden Regelungen getroffen, die stark in die Belange des Straßenbaus eingreifen. Aus diesem Grund ist die Beteiligung der Straßenbauverwaltung erforderlich, um die bautechnische und bauvertragliche Kompetenz sicher zu stellen, das Potenzial für Boden- und Grundwasserschutz auszuschöpfen und natürliche Ressourcen zu schonen. Die wichtigsten Aspekte zum umweltgerechten Einsatz von Boden und Ersatzbaustoffen aus der Sicht des Straßenbaus werden vorgestellt.
Die Länderarbeitsgemeinschaften Bodenschutz (LABO), Abfall (LAGA) und Wasser (LAWA) haben im September 2005 das Bundesumweltministerium gebeten, bundeseinheitliche, rechtsverbindliche Anforderungen an die Verwertung von mineralischen Abfällen in technischen Bauwerken und in bodenähnlichen Anwendungen zu regeln. Die Umweltministerien der Länder haben in ihren Stellungnahmen zum 2. Arbeitsentwurf der Mantelverordnung Forderungen gestellt, bei deren Umsetzung der Einsatz von mineralischen Ersatzbaustoffen im Verkehrswegebau stark eingeschränkt und unwirtschaftlich würde. Der Wille zur Schonung natürlicher Ressourcen ist nicht erkennbar. Anforderungen an Straßenbauwerke, an den Umweltschutz und an die Kreislaufwirtschaft konkurrieren in vielen Bereichen miteinander. Im Gesetzgebungsverfahren sind bisher trotz Gesprächen zwischen den Ressorts auf Arbeitsebene in grundlegenden Aspekten keine Einigung oder von Allen tragbare Kompromisse erzielt worden. Der Verkehrswegebau ist Hauptabnehmer der Ersatzbaustoffe, geht mit großen Mengen des Primärbaustoffs "Boden" um, ist aber auch "Abfallerzeuger". In der Mantelverordnung werden Regelungen getroffen, die stark in die Belange des Straßenbaus eingreifen. Aus diesem Grund ist die Beteiligung der Straßenbauverwaltung erforderlich, um die bautechnische und bauvertragliche Kompetenz sicher zu stellen, das Potenzial für Boden- und Grundwasserschutz auszuschöpfen und natürliche Ressourcen zu schonen. Die wichtigsten Aspekte zum umweltgerechten Einsatz von Boden und Ersatzbaustoffen aus der Sicht des Straßenbaus werden vorgestellt.
Es ist Tradition in der Forschungsgesellschaft, an den Anfang von Arbeitsgruppentagungen den Tätigkeitsbericht des Arbeitsgruppenleiters zu stellen. Die Tätigkeiten im Berichtszeitraum zwischen 2007 und 2010 spiegeln sich in den Vorträgen über Ergebnisse und abgeschlossene Aktivitäten wider. Der Bericht ist deshalb auf Veränderungen und Entwicklungen fokussiert, die seit der Erd- und Grundbautagung 2007 stattgefunden haben. Das betrifft organisatorische und personelle Veränderungen in der Arbeitsgruppe, laufende und geplante Forschungsvorhaben und Regelwerke. Außerdem ist über die Europäische Normung der Erdarbeiten und die Aktivitäten zur nationalen Spiegelung zu berichten. Bei den vielfältigen Themen und Aufgaben der Arbeitsgruppe werden für weitergehende Informationen die Road Maps und Steckbriefe der Gremien auf der Internetseite der FGSV empfohlen.
Im Jahr 2009 wurde CEN/TC 396 „Erdarbeiten“ mit der Zielsetzung gegründet, erstmalig europäische Normen für Erdarbeiten zu erarbeiten. Durch eine einheitliche Grundlage für Erdarbeiten in den EU-Ländern sollen Handelshemmnisse vermieden und die Nutzung und Schonung natürlicher Ressourcen verbessert werden. Länder mit bestehenden nationalen Regelwerken, z. B. im Eisenbahn- oder Straßenbau, können diese weiterhin anwenden und gleichzeitig Erfahrungen mit der europäischen Norm sammeln. Gespiegelt werden die Arbeiten vom NA 005-05-22 AA „Erdarbeiten (SpA zu CEN/TC 396 und CEN/TC 396/WG 1 bis WG 8), Gemeinschaftsausschuss mit FGSV“ im DIN-Normenausschuss Bauwesen. Von allen Beteiligten wurde in den letzten Jahren großes Engagement in die Erarbeitung und Begleitung der ersten sechs Teile der Normenreihe EN 16907 eingebracht. Ihre Veröffentlichung wird im April 2019 erwartet. Bereits 2017 wurde DIN CEN/TS 17006 (DIN SPEC 1035), Erdarbeiten – Flächendeckende dynamische Verdichtungskontrolle (FDVK) veröffentlicht. Der Norm-Entwurf zu DIN EN 16907-7, Erdarbeiten – Teil 7: Hydraulische Einbringung von mineralischen Abfällen befindet sich derzeit in der CEN-Umfrage. Diese erste Generation der europäischen Erdbaunormen stellt im Ergebnis den derzeitigen Konsens im europäischen Raum dar und geht den ersten Schritt in Richtung Harmonisierung. Zudem wird eine Übersicht über die nationale Praxis der verschiedenen Länder gegeben. Sie bietet somit für ausführende Unternehmen eine Hilfestellung, da diese einen Überblick über die Regelwerke der jeweiligen Länder erhalten. In neuen Arbeitsgruppen des CEN/TC 396 haben bereits die Arbeiten an weiteren Normungsvorhaben begonnen. Ein Technical Report (CEN/TR) zum Einsatz von sekundären Rohstoffen befindet sich in der Erarbeitung, und eine Arbeitsgruppe befasst sich mit erdbauspezifischen Prüfverfahren. Diese neuen Themen werden ebenfalls durch den NA 005-05-22 AA gespiegelt. Für die nächste Generation europäischen Erdbaunormen wird der NA 005-05-22 AA gemeinsam mit den Gremien der Forschungsgesellschaft für Straßen- und Verkehrswesen (FGSV) eine auf den Erfahrungen mit der neuen Normenreihe basierende Liste mit Änderungserfordernissen vorbereiten, die bei der nächsten turnusmäßigen Überprüfung im Sommer 2023 von deutscher Seite eingebracht werden soll.
Es wird der Frage nachgegangen, mit welchen statistischen Verfahren der simultane Vergleich mehrerer Messwerte verschiedener Testverfahren vorgenommen werden kann. Hierzu werden vier Methoden vorgestellt: der multiple Vergleich, die ANOVA-Varianzanalyse, die Methode der multiplen Endpoints sowie die Akkumulationsstatistik. Die Demonstration erfolgt an den Merkmalen periphere Wahrnehmung, Daueraufmerksamkeit, Tachistoskop, Tracking und mittlere Entscheidungszeit. Untersucht wurden 2 mal 13 Probanden (Methadon- und Kontrollgruppe). Es zeigte sich, dass die Akkumulationsstatistik eine optimale, für die Thematik äquivalente Bewertung für mehrere simultan gemessene fahrrelevante Leistungen darstellt. Voraussetzung für den Einsatz ist allerdings, dass die Verkehrswissenschaften sich über Art, Umfang und Gewichtung der verschiedenen Komponenten der fahrrelevanten Leistungen einig sind.
In most of developed countries, the progress made in passive safety during the last three decades allowed to drastically reduce the number of killed and severely injured especially for occupants of passenger cars. This reduction is mainly observed for frontal impacts for which the AIS3+ injuries has been reduced about 52% for drivers and 38% for front passengers. The stiffening of the cars' structure coupled with the generalization of airbags and the improvement of the seatbelt restraint (load limiter, pretension, etc.) allowed to protect vital body regions such as head, neck and thorax. However, the abdomen did not take advantage with so much success of this progress. The objective of this study is to draw up an inventory on the abdominal injuries of the belted car occupants involved in frontal impact, to present adapted counter-measures and to assess their potential effectiveness. In the first part the stakes corresponding to the abdominal injuries will be defined according to types of impact, seat location, occupants' age and type of injured organs. Then, we shall focus on the abdominal injury risk curves for adults involved in frontal impact and on the comparisons of the average risks according to the seat location. In the second part we will list counter-measures and we shall calculate their effectiveness. The method of case control will be used in order to estimate odds ratio, comparing two samples, given by occupants having or not having the studied safety system. For this study, two type of data sources are used: national road injured accident census and retrospective in-depth accident data collection. Abdominal injuries are mainly observed in frontal impact (52%). Fatal or severe abdominal occupant- injuries are observed at least in 27% of cases, ranking this body region as the most injured just after the thorax (51%). In spite of a twice lower occupation rate in the back seats compared to the front seats, the number of persons sustaining abdominal injuries at the rear place is higher than in the front place. In recent cars, the risk of having a serious or fatal abdominal injury in a frontal impact is 1.6% for the driver, 3.6% for the front passenger and 6.3% for the rear occupants. The most frequently hurt organs are the small intestine (17%), the spleen (16%) and the liver (13%). The most common countermeasures have a good efficiency in the reduction of the abdominal injuries for the adults: the stiffness of the structure of the seats allows decreasing the abdominal injury risk from 54% (driver) to 60% (front occupant), the seatbelt pretensioners decrease also this risk from 90% (driver) to 83% (front passenger).
Rollovers continue to be a major source of heavy truck fatalities when compared to other accident modes. Real world rollover accidents are analyzed and two distinct damage patterns are identified. Damage to heavy truck roofs can occur from lateral loading that transitions to vertical roof loading as the vehicle rolls onto its side and then over onto its roof. A second load path can occur when the vehicle has rolled onto its side and furrows into the ground generating large longitudinal friction forces between the roof and ground. A review of the previous literature and various test methodologies are presented. A sled impact test methodology is presented which allows for structural assessment of a heavy truck cab's crashworthiness in both of these loading environments. Two test series are presented using the sled impact test methodology in order to analyze real world truck rollovers using varying impact platen and contact angles. The structural deformation and failure patterns were found to be consistent with damage seen in real world accident vehicles. In each case, a second equivalent truck cab was then reinforced and tested under similar conditions to evaluate the energy management and crush resistance of a stronger cab structure. These structural reinforcements demonstrated a substantial reduction in roof crush and protected the survival space of the occupant compartment. The sled impact test procedure is an effective method for testing the structural performance of a heavy truck cab in a variety of loading scenarios comparable to real world accidents and ascertaining the load and energy load levels in these accident modes.
Diese Studie erfolgte als eine erste Prüfung der Frage, ob 0,1 Promille als Sicherheitszuschlag für eine Bestimmung eines Blutalkoholwertes von 0,1 Promille aus Gründen der Messunsicherheit angebracht und ausreichend ist. Beides trifft zu. Obwohl zur Zeit der Studie noch nicht bei oder unter 0,2 Promille kalibriert wurde, bestimmten alle Labors eine Blutalkoholkonzentration von 0,08 Promille mit einem Wert unter 0,18 g/L (Cmax ADH: 0,15 g/L = CmaxGC: 0,15 g/L = Blutalkoholkonzentration (BAK) von 0,12 Promille). Es bestand kein Bias zwischen beiden Verfahren. Festgestellte Standabweichungen: ADH: 0,021 g/L, GC: 0,025 g/L. Ein Sicherheitszuschlag von 0,1 Promille auf 0,1 Promille umfasst demnach vier Standardabweichungen und bietet für die neue Regelung im Paragrafen 24 Straßenverkehrsgesetz (StVG) bei der richtliniengemäß ausgeführten forensischen Blutalkoholbestimmung genügend Analysensicherheit.
Der Beitrag setzt sich mit folgenden Fragestellungen auseinander: 1. Stellen ältere Kraftfahrer ein Sicherheitsrisiko für den Straßenverkehr dar? 2. Wie wurden diese Frage und die "Fahreignung und Fahrtüchtigkeit älterer Kraftfahrer" in den vergangenen 50 Jahren wissenschaftlich bewertet - insbesondere bei Kongressen der Deutschen Gesellschaft für Verkehrsmedizin und den Deutschen Verkehrsgerichtstagen? 3. Wie haben in den vergangenen 50 Jahren Juristen, Behörden und Gesetzgeber die "Fahreignung älterer Kraftfahrer" gesehen und umgesetzt? 4. Werden morbiditäts- und altersbedingte Beeinträchtigungen der Leistungsfähigkeit rechtzeitig und richtig durch ältere Kraftfahrer erkannt? 5. Wie gehen ältere Kraftfahrer mit erkannten Leistungsmängeln um? 6. Benötigen ältere Verkehrsteilnehmer Aufklärung, Beratung, Fortbildung und Vorsorge- oder Kontrolluntersuchungen? Insgesamt kann festgestellt werden, dass allein aus normalem Altersabbau und hohem Alter kein Rückschluss auf die Fahruntauglichkeit gezogen werden kann. Das wichtigste gesellschaftliche Ziel für die Teilnahme älterer Menschen am Straßenverkehr ist - angesichts der demographischen Entwicklung - die Einsichtsfähigkeit in das altersbedingt verminderte Leistungsvermögen und den Veränderungswillen zu Kompensationsmechanismen bei älteren Verkehrsteilnehmern zu schärfen. Der behandelnde Arzt, Angehörige und sonstige Bezugspersonen sollten alles tun, um den bejahrten Kraftfahrer zu motivieren, sich seiner Selbstverantwortung bewusst zu werden und demgemäß zu handeln.
Es wird ein Überblick zur Thematik Lärm an Fahrbahnübergängen mit technischen Entwicklungen zur Lärmminderung gegeben. Dabei wird eingegangen auf die Anforderungen und Einsatzkriterien von Fahrbahnübergängen, aktuelle Forschungsvorhaben und -ergebnisse sowie auf Erfahrungen mit den verschiedenen Ausführungsarten von Fahrbahnübergängen, bei denen sich durch konstruktive Veränderungen oder Ergänzungen Lärmminderungen ergaben. Angesprochen werden auch die Inhalte und neuesten Entwicklungen bei der Europäischen Technischen Zulassungsleitlinie für Fahrbahnübergänge, die ETAG FÜ. Diese ETAG enthält Regelungen für verschiedene Familien von Fahrbahnübergängen, nämlich Unterflurübergänge, Fahrbahnübergänge aus Asphalt, Fahrbahnübergänge mit einem Dehnprofil, Mattenübergänge, Fingerübergänge, Rollverschlüsse und Lamellenübergänge. In einem Ausblick werden folgende Themen angesprochen: Überarbeitung der Regelwerke ZTV-ING und TL/TP-FÜ, Einführung der ETAG FÜ und die Berücksichtigung aus den Ergebnissen der Forschungsvorhaben, insbesondere aus dem Forschungsvorhaben "Leiser Straßenverkehr 2".
Schäden an Betonfahrbahnen sind fast immer auf das Eindringen von Wasser unter die Betonplatte zurückzuführen. Für die Erprobung von Entwässerungseinrichtungen wurden Versuchsstrecken auf den Autobahnen A5 (Frankfurt -Mörfelden), A7 (bei Dorfmark und Soltau) sowie der A 29 (Bei Sage) eingerichtet, bei denen verschiedene Maßnahmen (Längsentwässerung, Punktentwässerung, Flachdrainage) auf ihr Verhalten beobachtet werden.
Mit der Änderung des deutschen Straßenverkehrsrechtes werden Voraussetzungen für die amtliche Anerkennung von Anbietern von Kursen zur Wiederherstellung der Fahreignung gesetzlich konkretisiert. Das Instrument einer bundeseinheitlichen Qualitätssicherung wird per Gesetz verbindlich eingeführt. Mit der Überprüfung wird die Bundesanstalt für Straßenwesen als neutrale Stelle beauftragt. Es wird davon ausgegangen, dass es sich bei den Kursen zur Wiederherstellung der Eignung von Kraftfahrzeugführern um Maßnahmen der Personalzertifizierung handelt. Das Referat beschreibt den Ablauf des Akkreditierungsverfahrens und die Anforderungen an Maßnahmenträger, die einen Antrag auf Akkreditierung gestellt haben. Bei den Anforderungen an die Kursleiter spielen die berufliche Qualifikation sowie solche Anforderungen eine Rolle, die sich aus dem jeweiligen Qualitätssicherungssystem ergeben. In der Akkreditierung der Anbieter von Kursen zur Wiederherstellung der Fahreignung durch die Bundesanstalt für Straßenwesen wird nicht nur eine Bestätigung der Qualität und Fachkompetenz gesehen, sondern zugleich auch eine Gewähr für die Durchführung der jeweiligen Kurse nach bundeseinheitlichen Kriterien.
Road transport networks are of major importance for the economy and equally for the mobility of the citizens in the European countries. In order to improve the protection of transport infrastructures and the robustness of the European road network research projects are currently in process on national and European level. A main focus of these investigations is to analyze the specific vulnerabilities of bridges and tunnels concerning structural, operational and organizational aspects and to identify critical objects. But also infrastructures, which are critical due to their location and function in a road network, must be identified. For this the resulting regional and supra-regional impacts due to the failure of certain infrastructures have to be investigated on network level. In order to increase the security of road transport infrastructures and whole road networks the most effective security measures have to be determined. This paper gives an overview about the content and first results of current European and German research projects on road transport security.
A very high service availability is important for the operator and for the user of road tunnels, too. The service availability of a structure is directly related to its quality. The earlier quality assurance measures are being considered during the life cycle, the better a structure of high quality can be guaranteed. Problems which occur during the operation period of a structure often result from design errors or from inadequate realisation during the construction phase. They may also occur as a result of wrongly planned maintenance and refurbishment works. Thus, the transfer of specific data, information and experiences through the whole life cycle is very important. In this context methods of facility management can provide efficient assistance when they have already been used throughout all three classic phases of a structure's life cycle - planning, construction and operation. Finally the tunnel drainage system of German road tunnels is considered as an example as practical application possibility.
Data concerning accidents involving personal injury which have been collected in the context of in-depth investigations on scene in the Hannover area since 1973 and in the Dresden area since 1999 represent an important basis for empirical traffic safety research. At national and international level various analyses and comparisons are carried out on the basis of "in-depth data" from the above mentioned investigations. In-depth data play a decisive role e.g. within the validation of EuroNCAP results on secondary safety (crashworthiness) of individual passenger car models. Thus, statistically sound methods of data analysis and population parameter estimation are of high importance. Since the 1st of August 1984 the "in-depth investigations on scene" in the Hannover area have been carried out according to a sampling plan developed by HAUTZINGER in the context of a research project on behalf of BASt. In the meantime a second region of in-depth investigation on scene was added with surveys in Dresden and the surrounding area. Internationally, the acronym GIDAS (German In-Depth Accident Study) is commonly used for the two above mentioned surveys. The objective of a current research project (topic of this contribution) is, among other things, to examine and adjust the previous weighting and expansion method for the two regional accident investigations to the current general conditions.
Empirical vehicle crashworthiness studies are usually based on national or in-depth traffic accident surveys: Data on accident-involved cars/drivers are analysed in order to quantify the chance of driver injury and to assess certain risk factors like car make and model. As the cars/drivers involved in the same accident form a "cluster", where the size of the cluster equals the number of accident-involved parties, traffic accident survey data are typical multi-level data with accidents as first-level or primary and cars/drivers as secondlevel or secondary units (car occupants in general are to be considered as third level units). Consequently, appropriate statistical multi-level models are to be used for driver injury risk estimation purposes as these models properly account for the cluster structure of traffic accident survey data. In recent years various types of regression models for clustered data have been developed in the statistical sciences. This paper presents multi-level statistical models, which are generally applicable for vehicle crashworthiness assessment in the sense that data on single and multiple car crashes can be analysed simultaneously. As a special case of multi-level modelling driver injury risk estimation based on paired-by-collision car/driver data is considered. It is demonstrated that assessment results may be seriously biased, if the cluster structure inherent in traffic accident survey data is erroneously ignored in the data analysis stage.
Crash involvement studies using routine accident and exposure data : a case for case-control designs
(2009)
Fortunately, accident involvement is a rare event: the chance of an individual road user trip to end up in a crash is close to zero. Thus, according to general epidemiological principles one can expect the case-control study design to be especially suitable for quantifying the relative risk (odds ratio) of accident involvement of road users with a certain risk factor as compared to road users that do not have this characteristic. Ideally, of course, the database for such a case-control study should be established by drawing two independent random samples of cases (accidental units) and controls (nonaccidental units), respectively. If, however, special data collection is not an option, it is nevertheless possible to analyze routine accident and exposure data under a case-control design in order to fully exploit the information contained in already existing databases. As a prerequisite, accident and exposure data from different sources are to be combined in a single file of micro or grouped data in a way consistent with the case-control study design. Among other things, the proposed methodological approach offers the possibility to use in-depth data of the GIDAS type also in investigations of active vehicle safety by combining this data with appropriate vehicle trip data collected in mobility surveys.
The so-called "seat-belt injuries" or "seat-belt syndromes", described as 2-point seat-belt injuries, contain heavy inflection injuries of the lumbal spinal column, combined with heavy abdominal injuries as rupture of the upper intestinal bold or heavy injuries of the upper entrails. With "playing" children in the font of the car, with inappropriate plant of 3-point belts, identical injuries can occur.
Die meisten der in Betracht kommenden Zwischenquerschnitte werden durch die derzeitigen Entwurfsrichtlinien nicht abgedeckt. Hinreichende Erkenntnisse über ihre Leistungsfähigkeit, die bei verschiedenen Belastungen erzielbaren Verkehrsqualitäten und vergleichende Angaben zum Sicherheitsniveau der Zwischenquerschnitte liegen nicht vor. Die Projektgruppe "Zwischenquerschnitte" der Bundesanstalt für Straßenwesen untersucht daher die Vor- und Nachteile der Zwischenquerschnitte mit dem Ziel, Einsatzbereiche für die verschiedenen Ausbildungsformen von Querschnitten zu entwickeln. Der Bericht gibt einen Überblick über bisherige Aktivitäten der Projektgruppe und stellt erste Zwischenergebnisse der Untersuchung vor. Bisherige Messungen zeigen, dass der besondere Vorteil der zwei- und dreiseitigen Zwischenquerschnitte in der Verbesserung der Überholsituation liegt. Für die Beurteilung vierstreifiger Zwischenquerschnitte kann bislang erst die Aussage gemacht werden, dass immer dann, wenn die Verkehrsbelastung tatsächlich einen Querschnitt mit 4 Fahrstreifen erforderlich macht, man die beiden Fahrrichtungen aus Gründen der Verkehrssicherheit baulich trennen sollte.
This study analyses no.39 cases in which n.41 motorcyclists were fatally injured, or 36% of total motorcycle fatalities in Northern Ireland between 2004 and 2010 (n.114). There were n.17 cases (43.6%) where the actions of another vehicle driver caused the collision, in thirteen of these cases the motorcycles had their lights switched on. The remaining n.22 collisions (56.4%) were due to the actions of the motorcyclist. In the approach to the collision scene, there were n.13 cases (31.7%) in which the approach was a right hand bend and in n.8 (19.5%) cases, the approach was a left hand bend. In the remaining n.18 (43.9%) cases, the approach was a straight road. Of the n.17 (41.4%) motorcycles that slid after falling, n.10 (24.4%) fell onto their right side and the remaining n.7 (17.1%) fell onto their left side. The information from this study identifies primary and contributory causes of motorcycle collisions.
The changed focus in vehicle safety technology from secondary to primary safety systems need to evolve new methods to investigate accidents, high critical, critical and normal driving situations. Current Naturalistic Driving Studies mostly use vehicles that are highly equipped with additional measuring devices, video cameras, recording technology, and sensors. These equipped fleets are very expensive regarding the setup and administration of the study. Due to the great rarity of crashes it is additionally necessary to have a high distribution and a homogeneous distribution of subject groups. At the end all these facts are leading to a very expensive study with a manageable number of data. Smartphones are becoming more and more popular not only for younger people. Contrary to traditional mobile phones they are mostly equipped with sensors for acceleration and yaw rates, GPS modules as well as cameras in high definition resolution. Additionally they have high-performance processors that enable the execution of CPU-intensive tools directly on the phone. The wide distribution of these smartphones enables researchers to get high numbers of users for such studies. The paper shows and demonstrates a software app for smartphones that is able to record different driving situations up to crashes. Therefore all relevant parameter from the sensors, camera and GPS device are saved for a given duration if the event was triggered. The complete configuration is independently adjustable to the relevant driver and all events were sent automatically to the research institute for a further process. Direct after the event, interviews with the driver can be done and important data regarding the event itself are documented. The presentation shows the methodology and gives a demonstration of the working progress as well as first results and examples of the current study. In the discussion the advantages of this method will be discussed and compared with the disadvantages. The paper shows an alternative method to investigate real accident and incident data. This method is thereby highly cost efficient and comparable with existing methods for benefit estimation.
The number of injured car occupants decreases constantly. Nevertheless, they account for nearly 50% of all fatalities and about 44% of all seriously injured persons in German traffic accidents. Further reductions of casualties require multiple efforts in all parts of traffic safety. In this paper a detailed analysis of the important pre-hospital rescue phase was done. The basis for future improvements is the knowledge about injury causation of car occupants in combination with other corresponding influence factors. For that reason more than 1.200 severe (AIS3+) injuries of frontal car occupants were analyzed. For the most relevant injuries of car occupants multivariate analysis models were created to predict the probability of these injuries in a real crash scenario. In addition to the collision severity different influence factors like impact direction, seat belt usage, age of the occupant, and gender were analyzed. Furthermore, the models were checked regarding the goodness of fit and all results all results were checked concerning their robustness. The prediction models were created on the basis of 5.000 car accidents. Afterwards, the models were validated using 4.000 different car accidents. The prediction of the probability of severe injuries could be used for different applications in the field of traffic safety. One possibility is the implementation of the models in a tool for the on-the-spot diagnosis. The background for the development of such applications is the fact, that there are only limited diagnostic possibilities available at the accident scene. Nevertheless, the rescue forces have to make essential decisions like the alerting of the necessary medical experts, appropriate treatment, the type of transportation and the choice of an adequate hospital. These decisions quite often decide between life and death or influence the long-term effects of injured persons. At this point, indications of expectable injuries could help enormously. To enable even persons with limited technical knowledge to use the tool, a procedure was developed that facilitates the assumption of the given crash severity. Another important possibility for the application of the prediction models is the use for the qualification of information sent by e-call systems.
Over the last decades the number of traffic accident fatalities on German roads decreased by 77% down to 4968 in the year 2007. This positive development is due to optimisations of vehicle safety, roads and infrastructure and medical rescue issues. Up to now mostly the optimisations of secondary safety measures lead to this effect on vehicle safety. Since some years more and more driver assistance systems are available and lead to a further reduction of all accidents. These new systems are often comfort systems and have not primarily been developed to increase vehicle safety. In contrast to secondary safety systems primary safety systems are able to mitigate and avoid accidents. So in the future it is important to estimate the benefit of these systems in reducing accident numbers as well. Current benefit estimation methods mostly focus on a single system only and not on the combination of systems. In this paper a new method for a multivariate benefit estimation based on real accident data is developed. The paper describes the basic method to estimate the benefit of primary and secondary safety systems in combination. With the presented method the benefit will not be overestimated as it would be by a simple addition of the benefits of single systems. The model will be validated by a multivariate prospective benefit estimation of different vehicle safety systems in comparison to single benefit estimations of the same systems. For this the German In-Depth Accident Database is used. The results show the importance to implement the interactions of safety systems in the estimation process and rate the overestimation by a simple addition of the single system benefits. The validation includes primary and secondary safety systems in combination. The validation is done using more than 3500 real accidents which were initiated by cars. This sample out of the GIDAS database is representative for the current accident situation in Germany. The paper shows the necessity of a multivariate estimation of the benefit for existing and future safety systems.
In the last years various new driver information and driver assistance systems made their way into modern vehicles and there are yet countless systems underway. However, expenses for both, the development and the construction of these systems are tremendous. Therefore the interest of evaluating systems keeps growing steadily, not only regarding the results of systems developed in the last years but also regarding system ideas. Only if at least a rough benefit estimation is given, the industry can decide which development should be supported. However, there is still a lack of transparency of possible and useful methods for these kinds of estimations. These were analyses and structured in this study.
The accident research project in Dresden was founded in July 1999. To date over 6.000 crash investigations have been undertaken. About 10.000 vehicles have been documented and over 13.000 participants have been debriefed. But there is much more than this scientific success. Because of the interdisciplinary character between the medical and technical focus, the project affords an important contribution for the education of the involved students. Over 200 students of different fields of study have got experiences not only for the occupational career. This lecture describes the additional effects of the accident research project regarding the education of the students, the capacity for teamwork and learning about dealing with accident casualties.
Because of actual developments and the continuous increase in the field of drive assistant systems, representative and detailed investigations of accident databases are necessary. This lecture describes the possibility to estimate the potential of primary and secondary safety measures by means of a computerized case by case analysis. Single primary or secondary safety measures as well as a combination of both are presented. The method is exemplarily shown for the primary safety measure "Brake Assist" in pedestrian accidents. Regarding accident prevention only the primary safety measure is determined.
Bei Schrägseilbrücken und Hängebrücken ist die Tragfähigkeit und die Betriebsfestigkeit der Seile von entscheidender Bedeutung. Da in Deutschland seit einigen Jahren wieder verstärkt Schrägseilbrücken gebaut werden, kommt den neueren Entwicklungen auf diesem Gebiet eine besondere Bedeutung zu. Diese neuen Entwicklungen werden im Bericht beschrieben. An erster Stelle steht dabei die Anwendung von Litzenbündeln (LBS) in Deutschland bei der fertiggestellten Ziegelgrabenbrücke im Brückenzug der Rügenbrücke und der im Bau befindlichen Niederrheinbrücke Wesel. Diese im Ausland schon seit vielen Jahrzehnten angewendete Bauart stieß in Deutschland bisher auf Bedenken, insbesondere wegen der Prüfbarkeit und des Korrosionsschutzes. Litzenbündel bestehen im Wesentlichen aus 7-drähtigen Spannstahllitzen und speziellen Verankerungsteilen. Auf der freien Länge des Seils sind die Litzen durch ein HDPE-Rohr gegen äussere Beschädigungen und Umwelteinflüsse geschützt. Da Seile aus Litzenbuendeln bisher nicht bauaufsichtlich geregelt sind, war eine Zustimmung im Einzelfall erforderlich. Die Prüfung der Seile bei den regelmäßig durchzuführenden Bauwerksprüfungen ist verbunden mit einem großen technischen Aufwand, hohen Kosten und Beeinträchtigungen des Verkehrs. Der Bericht geht ausführlich auf mögliche Methoden der Seilprüfung ein. Bei der Ziegelgrabenbrücke wurde die magnetinduktive Prüfung, die sich bei vollverschlossenen Seilen seit vielen Jahren bewährt hat, zum Feststellen von Schäden an den Seilen aus Litzenbündeln angewendet. Neue Entwicklungen bei vollverschlossenen Seilen betreffen insbesondere die Korrosionschutzsysteme und die Ausführung der Ankerköpfe. In beiden Bereichen beschreibt der Bericht die Neuerungen. Bei den Instandsetzungen der vollverschlossenen Seile werden angespochen: dauerhafte Seilspreizung zur Verbesserung der Zugänglichkeit bei der visuellen Prüfung, Seilaustausch am Beispiel der Rheinbrücke Düsseldorf-Flehe und die Instandsetzung des Korrosionschutzes mit verschiedenen Methoden. Wegen der neueren technischen Entwicklungen entsprechen die derzeit gültigen einschlägigen Regelwerke teilweise nicht mehr dem Stand der Technik. Sie müssen daher überarbeitet oder gänzlich neu erstellt werden.
Accident simulation and reconstruction for enhancing pedestrian safety: issues and challenges
(2015)
The enhancement of pedestrian safety represents a major challenge in traffic accidents. This study allows a better understanding of the issues in pedestrian protection. It highlights the potential of in-depth studies in identifying relevant crash parameters interfering in the pedestrian safety. A computational simulation tool was developed to reconstruct pedestrian real-world crashes. A sample of 100 in-depth accident cases was reconstructed from two sources: 40 crashes provided by IFSTTAR-LMA and 60 crashes from CASR. To exemplify the methodology, two accident cases from each database were illustrated. A description of the sample of crashes was presented including the travel and impact speed of the vehicle, the driver reaction, the pedestrian walking speed, the scene configuration with the eventual obstacles, etc. This detailed description is pointing to the major factors affecting the limits of pedestrian safety systems.
Zur Ergänzung der bestehenden Routineverfahren in der forensischen Blutalkoholanalytik wurde ein massenspektrometrisches Verfahren mit d6-Ethanol als internem Standard entwickelt. Ziel war die Anwendung eines beweissicheren Bestimmungsverfahrens, bei dem Ethanol über die Retentionszeit und Substanzeigenschaften identifiziert wird. Die Pilotstudie belegt, dass die forensische Blutalkoholbestimmung durch Anwendung eines gaschromatographischen und massenspektrometrischen Verfahrens mit Dampfraumanalyse routinemäßig möglich ist. Im Gegensatz zum GC- und ADH-Verfahren ist die massenspektrometrische Blutalkoholbestimmung beweissicher. Die Autoren empfehlen die Aufnahme in die Richtlinien zur Bestimmung der Blutalkoholkonzentration für forensische Zwecke. Die Arbeit wurde vom Bund gegen Alkohol und Drogen im Straßenverkehr e.V. (B.A.D.S.) unterstützt.
Cycling supports the independence and health of the aging population. However, elderly cyclists have an increased injury risk. The majority of injured cyclists is victim of a single-sided accident, an accident in which there is no other party involved. The aim of the project "Safe and Aware on the bicycle" is to develop guidelines for an advisory system that is useful in preventing single-sided accidents. This system is able to support the elderly cyclist; enabling the cyclist to timely adapt his cycling behaviour and improve cycling safety and comfort. For the development of such advisory system the causes of singles accidents and the wishes of the elderly cyclist must be known. First step to obtain this insight was a literature survey and an GIDAS research. Unfortunately accidentology research with GIDAS did not give the full understanding of the pre-crash situations and (especially the behaviour related) factors leading to the accident. The second step was consultation of elderly cyclist through a questionnaire (n=800), in-depth interviews (n=12) and focus group sessions (n=15). This offered complementary information and a much better understanding of the behavioural aspects. Results concern the behaviour in traffic and identify specific physical (i.e. problems looking backwards over the shoulder) and mental issues. Furthermore, the needs and wishes for support in specific cycling situations were identified. In conclusion; The GIDAS results together with the information obtained contacting the elderly cyclists enabled setting up requirements for an advisory system, which is useful in preventing single-sided accidents.
Novice drivers are at high risk for crash involvement. We performed an analysis of causations, injury patterns and distributions of novice drivers in cars and on motorcycles in road traffic as a basis for proper measurements. Method Data of accident and hospital records of novice drivers (licence < 2 years) were analysed focusing the following parameters: injury type, localisation and mechanism, Abbreviated Injury Scale (AIS), maximum AIS (MAIS), delta-v, collision speed and other technical parameters and have been compared to those of experienced drivers. In 18352 accidents in the area of Hannover (years1985"2004), 2602 novice drivers and 18214 experienced drivers were recorded having an accident. Novice car drivers were more often and severe injured than experienced and on motorcycles the experienced riders were at higher risk. Novice drivers of both groups sustained more often extremity injuries. 4.5 % novice car drivers were not restraint compared to 3.7 % of the experienced drivers and 6.1 % novice motorcycle drivers did not wear a proper helmet (versus 6.5 %). Severe injuries sustained at a rate of 20 % at collision speeds below 30 km/h and in 80% at collision speeds above 50 km/h. Novice car drivers drove significant older cars. The risk profile of novice drivers is similar to those of drivers older than 65 years. Structural protection and special lectures like skidding courses could be proper remedial action next to harder punishment of violations.
Description of road traffic related knee injuries in published investigations is very heterogeneous. The purpose of this study was to estimate the risk of knee injuries in real world car impacts in Germany focusing vulnerable road users (pedestrians, bicyclists and motorcyclists) and restrained car drivers. The accident research unit analyses technical and medical data collected shortly after the accident at scene. Two different periods (years 1985-1993 and 1995-2003) were compared focusing on knee injuries (Abbreviated Injury Scale (AISKnee) 2/3). In order to determine the influences type of collision, direction and speed as well as the injury pattern and different injury scores (AIS, MAIS, ISS) were examined. 1.794 pedestrians, 742 motorcyclists, 2.728 bicyclists and 1.116 car drivers were extracted. 2% had serious ligamentous or bony injuries in relation to all injured. The risk of injury is higher for twowheelers than for pedestrians, but knee injury severity is higher for the latter group. Overall the current knee injury risk is low and significant reduced comparing both time periods (27%, p<0,0001). Severe injuries (AISKnee 2/3) were below 1%). Improved aerodynamic design of car fronts reduced the risk for severe knee injuries significantly (p=0,0015). Highest risk of injury is for motorcycle followed by pedestrians, respectively. Knee protectors could prevent injuries by reducing local forces. The classically described dashboard injury was rarely identified. The overall injury risk for knee injuries in road traffic is lower than estimated and reduced comparing both periods. The aerodynamic shape of current cars compared to older types reduced the incidence and severity of knee injuries. Further modification and optimization of the interior and exterior design could be a proper measurement. Classic described injury mechanisms were rarely identified. It seems that the AIS is still underestimating extremity injuries and their long term results.
Es wird auf Grund einer Befragung untersucht, ob ein signifikanter Unterschied zwischen Fahranfängern, die die Prüfung nach weniger als 21 Fahrstunden, und solchen, die sie nach 21 und mehr Stunden bestanden haben, in Bezug auf Unfallneigung und Unfallhäufigkeit besteht. Es ergab sich, dass die kurz ausgebildeten im ersten Jahr eine Fahrleistung von durchschnittlich 12.362 Kilometer, die langausgebildeten von 7.750 Kilometer aufzuweisen hatten. Pro 1 Million Kilometer hatten die kurzausgebildeten 45,6, die langausgebildeten 73,2 Unfälle. Dem entsprach das Verhältnis von anderen Auffälligkeiten. Bei den Kurzausgebildeten ergaben sich keine Hinweise auf Defizite. Der Nutzen einer personenunabhängigen Mindestzahl von Fahrstunden ist zweifelhaft. Fahrschüler, die eine verhältnismäßig große Zahl von Fahrstunden benötigen, stellen die eigentliche Problemgruppe dar. Fahrschüler, die in der Fahrschule schnell lernen und bei der Prüfung erfolgreich sind, haben vergleichsweise gute Fahranfängerchancen.
Nachhaltigkeit im Brückenbau
(2011)
Nachhaltigkeit und Energieeffizienz sind wichtige baupolitische Ziele. Der Bund als Bauherr ist sich seiner Vorbildfunktion bewusst: Baumaßnahmen sollen sowohl ökologisch verträglich als auch ökonomisch akzeptabel und sozio-kulturell angemessen sein. Alle drei Bereiche betreffen auch die Straßeninfrastrukturen in unterschiedlich ausgeprägter Weise. Aus Sicht des Bauherrn geht es um die Sicherstellung der Mobilität durch ein umweltverträgliches, wirtschaftliches und qualitativ hochwertiges Straßennetz. Für die Baupraxis stellt sich die Aufgabe, in ganzheitlicher Hinsicht optimierte Lösungen bereitzustellen. Brückenbauwerke haben eine hohe symbolische Kraft und prägen Städte und Landschaften. Sie sind nicht nur für Ingenieure faszinierend, sondern stellen als bedeutender Bestandteil der Straßeninfrastruktur einen hohen gesellschaftlichen Wert dar. In der heutigen Vergabepraxis werden Entscheidungen über Baumaßnahmen maßgeblich durch die Diskussion über Erstellungs- und einmalige Investitionskosten beeinflusst. Grund dafür sind auch die begrenzten finanziellen Ressourcen; dies führt aber nicht zwangsweise zu nachhaltigen Lösungen. Damit Brückenbauwerke ökonomisch und ökologisch optimiert sowie funktional und sozio-kulturell angemessen erstellt werden können, sind weiterentwickelte Wertungskriterien erforderlich. Hier liegt aber auch eine Chance für die Bauwirtschaft, ihre Kompetenz auf dem Gebiet des Bauwesens auszuschöpfen und qualitätsvolles und kostengünstiges Bauen im Lebenszyklus zu verbinden. Neue Instrumente und Methoden sind gefragt, die derzeit auf Initiative des BMVBS entwickelt werden. Vor diesem Hintergrund befasst sich eine Arbeitsgruppe der Bundesanstalt für Straßenwesen unter Beteiligung von Experten aus Forschung und Baupraxis mit der Entwicklung und Bereitstellung von Verfahren der Nachhaltigkeitsbewertung für Bauwerke der Straßeninfrastruktur. Ganzheitliche Wertungskriterien werden derzeit in Pilotstudien getestet.
The Federal Highway Network of Germany represents considerable fixed assets. Construction and maintenance activities not only require a high budget, but also influence the traffic infrastructure and, thus, the economy and society as a whole. The present safety of the network has to be ensured under consideration of environmental aspects. At the same time the network owner has to make sure that the civil works are carried out in the most efficient way. Considering the fact that financial resources are restricted, the costs have to be spent in a way to obtain the greatest possible benefit. This task is supported by the application of a comprehensive Asset Management, which is subdivided into operational and controlling tasks respectively. The paper describes the current management procedures.
In future, additional and more detailed data are needed about the current conditions of bridges for preventive maintenance management. Monitoring procedures are not merely able to provide key performance indicators for a specific point in time, but also over a period. These KPIs must be selected in such a way as to permit substantiated statements about the present and future condition of bridges. For this reason, greater efforts must be made to define the significant KPIs for the various types of bridges, and show how these figures can be reliably determined. Both the COST Action TU1402, and TU1406 offer important approaches which, properly combined, can deliver substantial added value to the calculation and description of the condition of bridges in the interest of proactive maintenance management.
Germany's road infrastructure grew over centuries to become the arteries and lifelines of our society. The present safety of the infrastructure has to be ensured under consideration of environmental aspects. At the same time the owner has to make sure that the maintenance activities are carried out in the most efficient way. Considering the fact that financial resources are restricted, maintenance costs have to be spent in a way to obtain the greatest possible benefit. In the case of bridges, which are one of the most important parts of the road infrastructure in Germany, this task is supported by the application of a bridge management system (BMS). The existing German BMS contains assessment and optimization procedures on object and network level and is the basis for advancements to meet future demands. Developments concern life cycle and quality-oriented, holistically optimized procedures. Reasonable infrastructure management will contribute to meeting efficiency and sustainability objectives and to achieving interoperability. Here holistic network infrastructure management methods are required. There is a strong need for management solutions during the whole service life of a structure. The definition of criteria for evaluation of the relevance of failure mechanisms, including acceptance thresholds, requires the availability of relevant data for management procedure. Tools for innovative investigation methods and an effective data management will help in meeting the requirements. Relevant fields of research are improved maintenance strategies to meet future demands concerning heavy goods traffic, application and further development of nondestructive testing methods for efficient and sustainable management structures, and the improvement of analytic management tools to meet future demands.
Allein im Netz der Bundesfernstraßen sind etwa 35.000 Brücken mit einer Fläche von 25 Millionen Quadratmetern enthalten. Ihr Wiederbeschaffungswert beträgt etwa 70 Milliarden DM. Es wird über die notwendigen Aktivitäten zur Erhaltung dieser für die Aufrechterhaltung des auf den Bundesfernstraßen rollenden Verkehrs besonders wichtigen Bauwerke berichtet. Aufgrund des weiter stärker werdenden Verkehrs, der zunehmenden Fahrzeuggewichte sowie der wachsenden Anzahl von Schwertransporten unterliegen insbesondere die älteren Bauwerke größerer Beanspruchung, als man bei ihrer Planung in Rechnung stellen musste. Hinzu kommt die natürliche Alterung aus sonstigen äußeren Einflüssen wie Temperatur, Witterung und erhöhter Umweltbelastung. Die Verwendung von Auftausalzen führt insbesondere bei älteren Brückenüberbauten zu Korrosionsschäden an der Bewehrung des Betons. Durch die Entwicklung eines Bauwerks-Management-Systems (BMS) wird die Verbesserung der Erhaltung von Brücken und sonstigen Ingenieurbauten angestrebt. Der Aufbau und die Wirkungsweise des BMS werden dargelegt. Des Weiteren werden die schon seit langem eingeführten Prüfvorschriften für Bauwerke im Zuge von Straßen und Wegen (DIN 1076) sowie gängige Prüfverfahren beschrieben.