620 Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Erscheinungsjahr
Dokumenttyp
- Konferenzveröffentlichung (115)
- Buch (Monographie) (58)
- Wissenschaftlicher Artikel (38)
- Arbeitspapier (12)
- Bericht (7)
Sprache
- Deutsch (119)
- Englisch (109)
- Mehrsprachig (2)
Schlagworte
- Safety (74)
- Sicherheit (74)
- Vehicle (58)
- Bewertung (57)
- Fahrzeug (57)
- Evaluation (assessment) (51)
- Versuch (47)
- Test method (45)
- Impact test (veh) (44)
- Anfahrversuch (43)
- Test (43)
- Prüfverfahren (42)
- Deutschland (39)
- Germany (39)
- Fußgänger (36)
- Pedestrian (36)
- Conference (33)
- Konferenz (33)
- Unfall (33)
- Accident (32)
- Verletzung (32)
- Injury (31)
- Dummy (27)
- Anthropometric dummy (24)
- Simulation (24)
- Car (23)
- Collision (23)
- Messung (23)
- Fahrerassistenzsystem (22)
- Forschungsbericht (22)
- Measurement (22)
- Frontalzusammenstoß (21)
- Head on collision (21)
- Zusammenstoß (21)
- Driver assistance system (20)
- Passives Sicherheitssystem (20)
- Pkw (19)
- Research report (19)
- Passive safety system (18)
- Europa (17)
- Europe (17)
- Method (17)
- Radfahrer (17)
- Schweregrad (Unfall, Verletzung) (17)
- Severity (accid, injury) (17)
- Verfahren (17)
- Compatibility (16)
- Head (16)
- Kompatibilität (16)
- Kopf (16)
- Aktives Sicherheitssystem (15)
- Biomechanik (15)
- Driver (15)
- Driver information (15)
- Fahrer (15)
- Fahrerinformation (15)
- Improvement (15)
- Insasse (15)
- Active safety system (14)
- Analyse (math) (14)
- Analysis (math) (14)
- Biomechanics (14)
- Cyclist (14)
- Shock (14)
- Vehicle occupant (14)
- Verbesserung (14)
- Ausrüstung (13)
- Brustkorb (13)
- Child (13)
- Equipment (13)
- Fahrzeugführung (13)
- Kind (13)
- Lkw (13)
- Prevention (13)
- Research project (13)
- Schlag (13)
- Thorax (13)
- Unfallverhütung (13)
- Accident prevention (12)
- Efficiency (12)
- Forschungsarbeit (12)
- Leistungsfähigkeit (allg) (12)
- Lorry (12)
- Standardisierung (12)
- Verkehr (12)
- Development (11)
- Driving (veh) (11)
- EU (11)
- Entwicklung (11)
- Richtlinien (11)
- Seitlicher Zusammenstoß (11)
- Side impact (11)
- Specifications (11)
- Wirtschaftlichkeitsrechnung (11)
- injury) (11)
- Belastung (10)
- Cost benefit analysis (10)
- Decrease (10)
- Elektronische Fahrhilfe (10)
- Load (10)
- Motorcycle (10)
- Motorrad (10)
- Reifen (10)
- Traffic (10)
- Tyre (10)
- Verhütung (10)
- Verletzung) (10)
- Verminderung (10)
- Airbag (9)
- Bemessung (9)
- Communication (9)
- Design (overall design) (9)
- Electronic driving aid (9)
- Error (9)
- Fahrstabilität (9)
- Fehler (9)
- Geschwindigkeit (9)
- Gesetzgebung (9)
- Kommunikation (9)
- Legislation (9)
- Schweregrad (Unfall (9)
- Speed (9)
- Standardization (9)
- Technische Vorschriften (Kraftfahrzeug) (9)
- Vehicle handling (9)
- Vehicle regulations (9)
- Alte Leute (8)
- Antikollisionssystem (8)
- Automatic (8)
- Automatisch (8)
- Autonomes Fahren (8)
- Autonomous driving (8)
- Bremsung (8)
- Perception (8)
- Risk (8)
- Severity (accid (8)
- Verkehrssteuerung (8)
- Wahrnehmung (8)
- Braking (7)
- Collision avoidance system (7)
- Ergonomics (7)
- Fahrzeuginnenraum (7)
- Interior (veh) (7)
- Knee (human) (7)
- Leg (human) (7)
- Old people (7)
- Prüfstand (7)
- Risiko (7)
- Sicherheitsgurt (7)
- Statistik (7)
- Technologie (7)
- Technology (7)
- Test rig (7)
- Auffahrunfall (6)
- Aufprallschlitten (6)
- Behaviour (6)
- Bein (menschl) (6)
- Datenbank (6)
- Deformation (6)
- Deformierbare Barriere (Anpralltest) (6)
- Emission (6)
- Ergonomie (6)
- Fatality (6)
- Gewicht (6)
- Human body (6)
- Impact sled (6)
- Impact test (6)
- Layout (6)
- Modification (6)
- Rear end collision (6)
- Safety belt (6)
- Statistics (6)
- Traffic control (6)
- Tödlicher Unfall (6)
- Unfallrekonstruktion (6)
- Verhalten (6)
- Warning (6)
- Weight (6)
- Air bag (restraint system) (5)
- Automatische Notbremsung (5)
- Crash helmet (5)
- Crashtest (5)
- Database (5)
- Gestaltung (5)
- Highway (5)
- Knie (menschl) (5)
- Kraftfahrzeug (5)
- Lärm (5)
- Menschlicher Körper (5)
- Messgerät (5)
- Noise (5)
- Norm (tech) (5)
- Official approval (5)
- Reconstruction (accid) (5)
- Schutzhelm (5)
- Sensor (5)
- Specification (standard) (5)
- Telematics (5)
- Telematik (5)
- Verformung (5)
- Verkehrsteilnehmer (5)
- Veränderung (5)
- Accident rate (4)
- Anthropmetric dummy (4)
- Autobahn (4)
- Benutzung (4)
- Body (car) (4)
- Decke (Straße) (4)
- Deformable barrier (impact test) (4)
- Emergency (4)
- Forecast (4)
- Fuel consumption (4)
- Headlamp (4)
- Industrie (4)
- Industry (4)
- Intelligent transport system (4)
- Karosserie (4)
- Knotenpunkt (4)
- Kraftstoffverbrauch (4)
- Lenken (Fahrzeug) (4)
- Mathematical model (4)
- Motorcyclist (4)
- Motorradfahrer (4)
- Notfall (4)
- Oberfläche (4)
- Prognose (4)
- Reaction (human) (4)
- Reaktionsverhalten (4)
- Rechenmodell (4)
- Reproducibility (4)
- Reproduzierbarkeit (4)
- Rolling resistance (4)
- Rollwiderstand (4)
- Scheinwerfer (4)
- Steering (process) (4)
- Surface (4)
- Surfacing (4)
- Unfallhäufigkeit (4)
- Use (4)
- Abbiegen (3)
- Abstandsregeltempomat (3)
- Adaptive cruise control (3)
- Aktive Sicherheit (3)
- Ankündigung (3)
- Apparatus (measuring) (3)
- Autonomous emergency braking (3)
- Behinderter (3)
- Bicyclist (3)
- Bildschirm (3)
- Brake light (3)
- Bremslicht (3)
- Bruch (mech) (3)
- Bumper (3)
- Carriageway (3)
- Crash Test (3)
- Datenübertragung (telekom) (3)
- Deceleration (3)
- Detection (3)
- Detektion (3)
- Digital model (3)
- Disabled person (3)
- Electric vehicle (3)
- Elektrofahrzeug (3)
- Empfindlichkeit (3)
- Fahrbahn (3)
- Fahrzeugabstand (3)
- Fahrzeugsitz (3)
- Failure (3)
- Front (3)
- Halswirbel (3)
- Hinten (3)
- Increase (3)
- Information (3)
- Intelligentes Transportsystem (3)
- International (3)
- Kamera (3)
- Leuchtdichte (3)
- Luminance (3)
- Nacht (3)
- Night (3)
- Numerisches Modell (3)
- Oberflächentextur (3)
- Optimum (3)
- Organisation (3)
- Prototyp (3)
- Prototype (3)
- Rear (3)
- Rear view mirror (3)
- Road user (3)
- Rückspiegel (3)
- Schallpegel (3)
- Seat (veh) (3)
- Sensitivity (3)
- Severity (acid (3)
- Sichtbarkeit (3)
- Sound level (3)
- Statistische Analyse (3)
- Stoßstange (3)
- Straße (3)
- Straßenverkehr (3)
- Surface texture (3)
- Telecommunication (3)
- Telekommunikation (3)
- Transport (3)
- Transport infrastructure (3)
- Turning (3)
- Tyre tread (3)
- Unterfahrschutz (3)
- Vergrößerung (3)
- Verkehrsinfrastruktur (3)
- Versuchspuppe (3)
- Verzögerung (3)
- Sichtbarkeit (3)
- Visual display (3)
- Warnung (3)
- Windschutzscheibe (3)
- Windscreen (veh) (3)
- Wirbelsäule (3)
- Abdomen (2)
- Abnutzung (2)
- Acceleration (2)
- Achslast (2)
- Active safety (2)
- Adult (2)
- Articulated vehicle (2)
- Attention (2)
- Aufmerksamkeit (2)
- Axle load (2)
- Baumusterzulassung (2)
- Berechnung (2)
- Beschleunigung (2)
- Bicycle (2)
- Blind spot (veh) (2)
- Breite (2)
- Bridge (2)
- Brücke (2)
- Buch (2)
- Calculation (2)
- Camera (2)
- Cause (2)
- Cervical vertebrae (2)
- Classification (2)
- Comfort (2)
- Communication technology (2)
- Contact (tyre road) (2)
- Control (2)
- Damage (2)
- Data acquisition (2)
- Data exchange (2)
- Data processing (2)
- Data transmission (telecom) (2)
- Datenaustausch (2)
- Datenerfassung (2)
- Datenverarbeitung (2)
- Dauerhaftigkeit (2)
- Daylight (2)
- Deckschicht (2)
- Delivery vehicle (2)
- Durability (2)
- Echtzeit (2)
- Elektronisches Stabilitätsprogramm (2)
- Erwachsener (2)
- Evaluation (2)
- Fahrleistung (2)
- Fahrrad (2)
- Fahrzeugbeleuchtung (2)
- Fahrzeugteile (2)
- Finite element method (2)
- Force (2)
- Freight transport (2)
- Future transport mode (2)
- Gelenkfahrzeug (2)
- Griffigkeit (2)
- Gütertransport (2)
- Herstellung (2)
- Hüfte (menschl) (2)
- Impact study (2)
- Individueller Verkehr (2)
- Information documentation (2)
- Informationstechnik (2)
- Interactive model (2)
- Interaktives Modell (2)
- Interface (2)
- Intersection (2)
- Junction (2)
- Klassifizierung (2)
- Knie (2)
- Komfort (2)
- Kommunikationstechnik (2)
- Kontakt Reifen-Straße (2)
- Kraft (2)
- Kunststoff (2)
- Landstraße (2)
- Lichtsignal (2)
- Manufacture (2)
- Methode der finiten Elemente (2)
- Mobility (2)
- Mobilität (2)
- Modell (2)
- Motorway (2)
- Nasse Straße (2)
- On the spot accident investigation (2)
- Organization (association) (2)
- Parken (2)
- Parkfläche (2)
- Parking (2)
- Planning (2)
- Planung (2)
- Plastic material (2)
- Private transport (2)
- Quality (2)
- Qualität (2)
- Real time (2)
- Reifenprofil (2)
- Road safety (2)
- Road traffic (2)
- Sachschaden (2)
- Safety glass (2)
- Sample (mater) (2)
- Schutz (2)
- Schweden (2)
- Sicherheitsglas (2)
- Skidding resistance (2)
- Spinal column (2)
- State of the art report (2)
- Statistical analysis (2)
- Steuerung (2)
- Sweden (2)
- Tageslicht (2)
- Technische Überwachung (Fahrzeug) (2)
- Textbook (2)
- Toter Winkel (2)
- Traffic signal (2)
- Truck (2)
- Underride protection (2)
- Unterleib (2)
- Untersuchung am Unfallort (2)
- Ursache (2)
- Vehicle Regulations (2)
- Vehicle inspection (2)
- Vehicle lighting (2)
- Vehicle mile (2)
- Vehicle spacing (2)
- Vereinigtes Königreich (2)
- Verkehrsinformation (2)
- Vibration (2)
- Vorn (2)
- Wear (2)
- Wearing course (2)
- Wet road (2)
- Width (2)
- Zukünftiges Verkehrsmittel (2)
- Zulassung (tech) (2)
- Zusammenstoss (2)
- (menschl) (1)
- Abblendlicht (1)
- Abgefahrener Reifen (1)
- Ablenkung (psychol) (1)
- Absorption (1)
- Accident data (1)
- Accident proneness (1)
- Accident reconstruction (1)
- Accuracy (1)
- Active Safety System (1)
- Administration (1)
- Aged people (1)
- Air bag (1)
- Alternative Energie (1)
- Alternative energy (1)
- Angle (1)
- Anordnung (1)
- Anthropometric body (1)
- Anthrpometric dummy (1)
- Anti locking device (1)
- Antiblockiereinrichtung (1)
- Antikollisisonssystem (1)
- Antrieb (tech) (1)
- Apparatus (measurement) (1)
- Apparatus [measuring] (1)
- Aquaplaning (1)
- Arbeitsgruppe (1)
- Area traffic control (1)
- Armaturenbrett (1)
- Asphaltstraße (Oberbau) (1)
- Assistenzsysteme (1)
- Aufprall (1)
- Auspuff (1)
- Automation (1)
- Automatisierung (1)
- Autonomes Fahrzeug (1)
- Autonomous Emergency Braking (1)
- Autonomous emerhency braking (1)
- Autonomous vehicle (1)
- Ballungsgebiet (1)
- Battery (1)
- Bau (1)
- Baustelle (1)
- Beanspruchung (1)
- Bearing capacity (1)
- Beförderungsart (1)
- Bein (1)
- Benefit cost analysis (1)
- Berechnung d Straßenoberbaus (1)
- Betriebsverhalten (1)
- Bibliographie (1)
- Bibliography (1)
- Biophysic (1)
- Blendung (1)
- Bonnet (car) (1)
- Brake (1)
- Breaking (1)
- Bremse (1)
- Brennstoffzelle (1)
- Bus (1)
- Cadaver (1)
- Calibration (1)
- Car park (1)
- Carbon monoxide (1)
- Catalysis (1)
- Cervical vertebrae; Conference; Evaluation (assessment); Injury; Spinal column; Test (1)
- Chart (1)
- Chassis (1)
- Cinematography (1)
- Coefficient of friction (1)
- Collision Avoidance System (1)
- Collisison avoidance system (1)
- Colour (1)
- Compatiblity (1)
- Components of the car (1)
- Components of the vehicle (1)
- Comprehension (1)
- Compression (1)
- Construction (1)
- Construction site (1)
- Consumer protection (1)
- Contact (Tyre road) (1)
- Conurbation (1)
- Cooperative intelligent transport system (1)
- Correlation (math, stat) (1)
- Corrosion (1)
- Cross roads (1)
- Crossing the road (pedestrian) (1)
- Dashboard (1)
- Data bank (1)
- Data security (1)
- Data transmission (1)
- Datensicherheit (1)
- Daytime running light (1)
- Deformable barrier (Impact test) (1)
- Deformable barrier system (impact test) (1)
- Dehnungsmessstreifen (1)
- Demand (econ) (1)
- Demographie (1)
- Depth (1)
- Detection response task (1)
- Deterioration (1)
- Diesel engine (1)
- Dieselmotor (1)
- Dipped headlight (1)
- Dispersion (stat) (1)
- Dissertation (1)
- Distraction (1)
- Drive type (1)
- Driver Assistance System (1)
- Driver information system (1)
- Driver training (1)
- Driving (1)
- Driving behavior (1)
- Driving function (1)
- Driving task (1)
- Druck (1)
- Dynamic penetration test (1)
- Dynamics (1)
- Dynamik (1)
- Dynamo (1)
- EU directive (1)
- EU-Richtlinie (1)
- Economics of transport (1)
- Eichung (1)
- Eigenschaft (1)
- Eindringung (1)
- Electrode (1)
- Electroencephalography (1)
- Electronic stability program (1)
- Electronics (1)
- Elekronic stability program (1)
- Elektrode (1)
- Elektroencephalographie (1)
- Elektronik (1)
- Emission control (1)
- Emissionskontrolle (1)
- Energieeinsparung (1)
- Energy conservation (1)
- Engine capacity (1)
- Erfahrung [menschl] (1)
- Ersatzfahraufgabe (1)
- Euro NCAP (1)
- European New Car Assessment Programme (1)
- European Union (1)
- Evaluation (Assessment) (1)
- Evaluation [assessment] (1)
- Exhaust pipe (1)
- Experience [human] (1)
- Experiment (1)
- Expert interview (1)
- Expert system (1)
- Experteninterview (1)
- Expertensystem (1)
- Eye movement (1)
- Fahraufgabe (1)
- Fahrausbildung (1)
- Fahrbahnmarkierung (1)
- Fahrbahnüberquerung (1)
- Fahrbare Barriere (1)
- Fahrerassistenzsystemen (1)
- Fahrerinformationssystem (1)
- Fahrfunktion (1)
- Fahrsimulator (1)
- Fahrstreifen (1)
- Fahrstreifenwechsel (1)
- Fahrtyp (1)
- Fahrverhalten (1)
- Fahrwerk (1)
- Farbe (1)
- Fatigue (human) (1)
- Federal Republic of (1)
- Federung (1)
- Fernverkehrsstraße (1)
- Festigkeit (1)
- Feuer (1)
- Feuerlöscher (1)
- Film (Filmtechnik) (1)
- Fire (1)
- Fire extinguisher (1)
- Flexible pavement (1)
- Foot (not a measure) (1)
- Form (1)
- Fracture (bone) (1)
- Framework architecture (1)
- France (1)
- Frankreich (1)
- Frau (1)
- Frequency (1)
- Frequenz (1)
- Frost (1)
- Fuel (1)
- Fuel cell (1)
- Fuß (1)
- Fußgängerbereich (1)
- Gebiet (1)
- Gebraucht (1)
- Gefahr (1)
- Gelände (1)
- Geländefahrzeug (1)
- Genauigkeit (1)
- Gierverhalten (1)
- Glare (1)
- Goods traffic (1)
- Graphische Darstellung (1)
- Great Britain (1)
- Grenzfläche (1)
- Grenzwert (1)
- Großbritannien (1)
- Guideline (1)
- Güterverkehr (1)
- Harmonisation (1)
- Harmonisierung (1)
- Harmonization (1)
- Head (human) (1)
- Hearing (1)
- Height (1)
- Hell (1)
- Highway design (1)
- Hip (human) (1)
- Hospital (1)
- Hubraum (1)
- Human factor (1)
- Human tolerance (1)
- Hybrid vehicle (1)
- Hybridfahrzeug (1)
- Hydrocarbon (1)
- Höhe (1)
- Hörvermögen (1)
- Ignition algorithms (1)
- Impact test (crash) (1)
- In Bewegung (1)
- In service behaviour (1)
- In situ (1)
- Incident detection (1)
- Individual transport (1)
- Individualverkehr (1)
- Information Engineering (1)
- Information Technology (1)
- Information management (1)
- Injury risk (1)
- Innenstadt (1)
- Intelligent Speed Assist (1)
- Intelligentes Verkehrssystem (1)
- Interview (1)
- Karte (1)
- Katalyse (1)
- Kleintransporter (1)
- Knochenbruch (1)
- Kognitive Aufgabenanforderung (1)
- Kohlenmonoxid (1)
- Kohlenwasserstoff (1)
- Kompatiblität (1)
- Kontakt Reifen Straße (1)
- Kontrolle (1)
- Kooperatives System (ITS) (1)
- Kopf (menschl) (1)
- Korrelation (math, stat) (1)
- Korrosion (1)
- Kraftfahrzeugmodel (1)
- Kraftstoff (1)
- Kraftübertragung (Fahrzeug) (1)
- Krankenhaus (1)
- Kreuzung (1)
- LKW (1)
- Laboratorium (1)
- Laboratory (not an organization) (1)
- Laborexperiment (1)
- Landstrasse (1)
- Lane changing (1)
- Lang-Lkw (1)
- Leichnam (1)
- Leicht (1)
- Leitfaden (1)
- Length (1)
- Lenkrad (1)
- Lichtstärke (1)
- Lidschlag (1)
- Lieferfahrzeug (1)
- Light (colour) (1)
- Light intensity (1)
- Lightweight (1)
- Limit (1)
- Literaturanalyse (1)
- Literature review (1)
- Longer and heavier vehicle (1)
- Länge (1)
- Main road (1)
- Man-machine interface (1)
- Map (1)
- Market (1)
- Markt (1)
- Materialveränderung (allg) (1)
- Matrix (1)
- Measuring (1)
- Mensch Maschine Verhältnis (1)
- Mensch-Maschine-Interaktion (1)
- Mensch-Maschine-Schnittstelle (1)
- Menschlicher Faktor (1)
- Menschlicher körper (1)
- Text (1)
- Mobile barrier (1)
- Mobility Services (1)
- Mobility services (1)
- Mobilitätsdienst (1)
- Mobilitätsdienstleistungen (1)
- Model (not math) (1)
- Modell (non math) (1)
- Modern Advanced Emergency Braking Systems (AEBS) (1)
- Motor (1)
- Motorhaube (1)
- Moving (1)
- Müdigkeit (1)
- Nachfrage (1)
- Nachricht (1)
- Naturalistic Driving (1)
- Naturalistic driving (1)
- Navigation (1)
- Notbremsassistenzsysteme (AEBS) (1)
- Nummer (1)
- Oberbau (1)
- Occupant (1)
- On the right (1)
- Optimierung (1)
- Optimizing (1)
- Organization (1)
- Overlapping (1)
- Parking Area (1)
- Parking place (one veh only) (1)
- Parkstand (einzeln) (1)
- Passive Sicherheit (1)
- Pavement (1)
- Pavement Management System (1)
- Pavement design (1)
- Pavement management system (1)
- Pedestrian precinct (1)
- Pelvis (1)
- Penetration (1)
- Pfahl (1)
- Physiolog Belastungsgrenze (1)
- Pile (1)
- Pkw; Verhütung (1)
- Pollutant (1)
- Population (1)
- Pressure (1)
- Probe (1)
- Program (computer) (1)
- Properties (1)
- Propulsion (1)
- Prüefverfahren (1)
- Prüfkörper (1)
- Psychological aspects (1)
- Psychologie (1)
- Psychologische Gesichtspunkte (1)
- Psychology (1)
- Public Transport (1)
- Quality assurance (1)
- Qualitätssicherung (1)
- Radio (1)
- Rahmenarchitektur (1)
- Rammsondierung (1)
- Rechenprogramm (1)
- Rechts (1)
- Reflectorized material (1)
- Reflexstoffe (1)
- Region (1)
- Reibungsbeiwert (1)
- Reiseinformationsdienste (1)
- Research Report (1)
- Retread tyre (1)
- Rippe (menschl) (1)
- Risikobewertung (1)
- Risk assessment (1)
- Road (1)
- Road construction (1)
- Road marking (1)
- Road network (1)
- Robot (1)
- Roboter (1)
- Rotation (1)
- Route guidance (1)
- Runderneuerter Reifen (1)
- Rundfunk (1)
- Rural road (1)
- Rutting (wheel) (1)
- SAE Level (1)
- Safety Assist Systems (1)
- Safety Performance Indikator (1)
- Safety fence (1)
- Schadstoff (1)
- Schall (1)
- Schnittstelle (1)
- Schulter (1)
- Schutzeinrichtung (1)
- Schweregrad (Unfall, Verletzung (1)
- Schweregrad /Unfall (1)
- Schwingung (1)
- Seat belt (1)
- Second hand (1)
- Sehvermögen (1)
- Seite (1)
- Service area (1)
- Shape (1)
- Shoulder (human) (1)
- Side (1)
- Simulator (driving) (1)
- Sociology (1)
- Software (1)
- Sound (1)
- Soziologie (1)
- Spain (1)
- Spanien (1)
- Specification (standard ) (1)
- Spectrum (1)
- Spektrum (1)
- Sport utility vehicle (1)
- Spurrinne (1)
- Stadardization (1)
- Stadt (1)
- Staggered junction (1)
- Stand der Technik (Bericht) (1)
- Standard (1)
- Standardabweichung (1)
- Stapedius reflex (1)
- Stapediusreflex (1)
- Statics (1)
- Statik (1)
- Statistic (1)
- Statistical Analysis (1)
- Steering wheel (1)
- Steifigkeit (1)
- Stiffness (1)
- Stochastic process (1)
- Stochastischer Prozess (1)
- Strain gauge (1)
- Straßenbau (1)
- Straßenentwurf (1)
- Straßennetz (1)
- Strength (mater) (1)
- Stress (psycho) (1)
- Stress (psychol) (1)
- Störfallentdeckung (1)
- Surrogate driving set-up (1)
- Surveillance (1)
- Suspension (veh) (1)
- Sustainability (1)
- Tactile perception (1)
- Tagesfahrlicht (1)
- Taktiles Signal (1)
- Tangential (1)
- Tank Rast Anlage (1)
- Technische Vorschriften (1)
- Technische Vorschriften [Kraftfahrzeug] (1)
- Terrain (1)
- Tests (1)
- Thesis (1)
- Tiefe (1)
- Town centre (1)
- Toxicity (1)
- Toxizität (1)
- Tracking task (1)
- Trackingaufgabe (1)
- Traffic Control (1)
- Traffic Management (1)
- Traffic assignment (1)
- Traffic engineering (1)
- Traffic flow (1)
- Traffic information (1)
- Traffic lanes (1)
- Traffic management (1)
- Traffic participants (1)
- Traffic sign (1)
- Tragfähigkeit (1)
- Train (1)
- Transmission (veh) (1)
- Transport information (1)
- Transport type (1)
- Transportation System Services (1)
- Travel information services (1)
- Tunnel (1)
- Typenzulassung (1)
- Tätigkeitsbericht (1)
- USA (1)
- Umweltfreundlichkeit (1)
- Underride prevention (1)
- Unfalldaten (1)
- Unfallneigung (1)
- United Kingdom (1)
- United kingdom (1)
- Urban area (1)
- Vehicle Spacing (1)
- Veraenderung (1)
- Verbraucherschutz (1)
- Verkehrsfluss (1)
- Verkehrsmanagement (1)
- Verkehrssicherheit (1)
- Verkehrssystem-Dienste (1)
- Verkehrstechnik (1)
- Verkehrsumlegung (1)
- Verkehrswirtschaft (1)
- Verkehrszeichen (1)
- Verletzungsrisiko (1)
- Versetzte Kreuzung (1)
- Verständnis (1)
- Verwaltung (1)
- Video camera (1)
- Vision (1)
- Vorne (1)
- Vulnerable Road User Protection (1)
- Wasser (1)
- Water (1)
- Weather (1)
- Winkel (1)
- Wirksamkeitsuntersuchung (1)
- Wirkungsanalyse (1)
- Witterung (1)
- Woman (1)
- Working group (1)
- Yawing (veh) (1)
- Zahl (1)
- Zentrale Verkehrssteuerung (1)
- Zielführungssystem (1)
- Zug (Eisenbahn) (1)
- Zusammendrückung (1)
- Zustandsbewertung (1)
- Zündalgorithmen (1)
- human-machine interaction (1)
- road traffic (1)
- road user (1)
- ÖPNV (1)
- Überdeckung (1)
Institut
- Abteilung Fahrzeugtechnik (230) (entfernen)
Upcoming test procedures and regulations consider the use of Q-dummies. Especially Q6 and Q10 will be introduced to assess the safety of child occupants in vehicle rear seats. Therefore detailed knowledge of these dummies is important to improve safety. As recent studies have shown, chest deflection measurements of both dummies are influenced by parameters like belt geometry. This could lead to a non optimized design of child restraint systems (CRS) and belt systems. The objective of this study is to obtain a more detailed understanding of the sensitivity of chest measurements to restraint parameters and to investigate the possibilities of chest acceleration as an alternative for the assessment of chest injury risks. A study of frontal impact sled tests was performed with Q6 and Q10 in a generic rear seat environment on a bench. Belt parameters like modified belt attachment locations were varied. For the Q6 dummy, different positioning settings of the CRS (booster with backrest) and of the dummy itself were investigated. The Q10 dummy was seated on a booster cushion. Here the position of the upper belt anchorage point was varied. To simulate the influence of vehicle rotation in the ODB crash configuration, the bench was pre-rotated on the sled in additional tests with the Q10. This configuration was tested with and without pretensioner and load limiter. Chest deflection in Q6 showed a high sensitivity to changes in positioning of the CRS and the dummy itself. A more slouched position of the CRS or dummy resulted in a reduction of measured chest deflection, whereas chest acceleration increased for a more slouched position of the CRS. Chest deflection in Q10 is sensitive to belt geometry as already shown in other studies. In a more outboard position of the shoulder belt anchorage the measured chest deflection is higher. Chest acceleration shows the opposite tendency, which is highest for the rearmost location of the upper belt anchorage. On a pre-rotated bench the highest chest deflection within this test series was observed without load limiter/pretensioner and an outboard belt position. By optimizing the belt location and the use of pretensioner/load limier the chest deflection was significantly reduced. For the Q6 a criterion based on chest acceleration as well as deflection measured at two locations might be the most reliable approach, which requires further research with an additional upper deflection sensor. In the Q10 the measured chest deflection does not always correctly reflect the severity of chest loading. The deflection is depending on initial belt position and restraint parameters as well as test conditions, which result in different directions of belt migration. A3ms chest acceleration might be a better indicator for severity of chest loading independent of different conditions like belt geometries. However, in some cases the benefit of an optimized restraint system could only be shown by deflection. These findings suggest that further research is needed to identify a chest injury assessment method, which could be based on deflection as well as acceleration or other parameters related to belt to occupant interaction.
Frontal impact is still the most relevant impact direction in terms of injury causation amongst car occupants. Especially for car-to-car frontal impacts the mass ratio between the involved vehicles has a significant impact on the injury risk (the heavier the opponent car the higher the injury risk). In order to address this issue frontal Mobile Deformable Barrier test procedures have been developed world-wide (for example the MPDB procedure that was fully described during the FIMCAR Project). The objective of this study was to investigate how vehicles of different weight classes perform in a mobile barrier test procedure compared to a fixed barrier test procedure (the full width rigid and offset deformable barrier test). Beyond that, the influence of vehicle mass and vehicle deformation on injuries was evaluated based on real world accident data. Five vehicle types were selected and tested in a fixed offset test procedure (ODB), a full width rigid barrier test procedure (FWRB) and a mobile offset test procedure (MPDB). For the accident analyses data from the German In-Depth Accident Study (GIDAS) was evaluated with a focus on MAIS 2+ injured belted front row car (UN-R 94 compliant cars) occupants in frontal impact accidents. Test data indicates higher dummy loadings, in particular for the head acceleration and chest acceleration, in the MPDB test for the vehicles with a mass lighter than the trolley (1,500 kg) compared to the FWRB test. The trend of increased vehicle stiffness (especially illustrated by tests with the MPDB and small cars) shows the need of a further improvement of passive restraint systems to reduce the occupant loading and with it the injury risk. The analyzed GIDAS data confirm the higher injury risk for occupants in cars with an accident weight of less than 1,500 kg compared to those with a crash weight above 1,500 kg in car-to-car and car-to-object or car-to-HGV, respectively. Furthermore the injury risk increases with decreasing mass ratio (i.e., the opponent car is heavier) in car-to-car accidents. Independent from the higher injury risk, the risk for passenger compartment intrusion in frontal impact appears not to be independent on the crash weight of the car.
During a lifecycle a tyre undergoes degradations due to mechanical wear and chemical ageing which affect not only durability and safety but also tyre/road noise emission and rolling resistance. This paper presents a study with the purpose to study how much tyre/road noise and rolling resistance change when car tyres are worn down from the original 8 mm tread depth to 2 mm, and when chemical ageing of the tyre rubber is simulated by exposure to heat. Six car tyres of different types were selected for the study which were worn on a wear machine in steps of 2 mm tread depth. Before, between and after these wear sessions tyre/road noise and rolling resistance were measured on two drum facilities with different surface textures, including replicas of ISO surfaces. Additionally, coast-by and CPX measurements were made on outdoor ISO test tracks. The results show that the wear and age effect was low on ISO surfaces but dramatic (noise increased with wear) on the rough-textured surface and high but opposite on an extremely smooth surface.
Schutz von Fahrzeuginsassen
(1983)
Ausgehend von unfallstatistischen Daten und Ausführungen über Unfallablauf und Unfallfolgen werden Schutzmaßnahmen diskutiert, die das Verletzungsrisiko für Fahrzeuginsassen möglichst niedrig halten. Die Wirksamkeit von Schutzmaßnahmen wird beeinflusst von der Unfallkonstellation, Eigenschaften der Pperson und vom Fahrzeug (Deformationscharakteristik, Auslegung des rückhaltesystems). Die Gesamtwirksamkeit hängt wiederum ab von der Wirksamkeit des Rückhaltesystems, der Benutzungshäufigkeit und der Benutzungsqualität. Die Arbeit endet mit volkswirtschaftlichen Überlegungen und kommt zu dem Schluss, dass auch in Zukunft als wichtigste Maßnahme zum Schutz von Fahrzeuginsassen die Erhöhung der Anlegequote für Sicherheitsgurte anzusetzen ist.
The Intersection 2020 project was initiated to develop a test procedure for Automatic Emergency Braking systems in intersection car-to-car scenarios to be transferred to Euro NCAP. The project aims to address current road traffic accidents on European roads and therefore sets a priority of the identification of the most important car-to-car accidents and Use Cases. Taking into account technological and practical limitations, Test Scenarios are derived from the Use Cases in a later stage of the project. This paper presents parts of a larger study and provides an overview of common car-to-vehicle(at least four wheels) collision types at junctions in Europe and specifies seven Accident Scenarios from which the three scenarios “Straight Crossing Paths (SCP)”, “Left Turn Across Path – Opposite Direction Conflict (LTAP/OD)” and “Left Turn Across Path – Lateral Direction (LTAP/LD)” are most important due to their high relevance regarding severe car-to-car accidents. Technical details about crash parameters such as collision and initial speeds are delivered. The analysis work performed is input for the definition and selection of the Use Cases as well as for the project’s benefit estimation. The numbers of accidents and fatalities in accidents at intersections involving a passenger car were shown per intersection type. In both statistics, it was found that accidents at crossroads and T- or staggered junctions are of highest relevance, followed by roundabouts. Focusing on accidents at intersections between one passenger car and another road user shows that around one-third of all accidents and related fatalities could have been assigned to car-to-PTW accidents and one-fifth of all accidents and fatalities to car-to-car accidents. Regarding car-to-car accidents with at least serious injury outcome 38% out of 34,489 car-to-car accidents happened at intersections. These figures correspond to 18% of the fatalities (4,236 fatalities in total). Considering all intersection types, around half of all related accidents happened in urban environments whereas this number decreased to one-third of all fatalities. Further, the proportion of road fatalities per country occurring at intersections varies widely across the EU. Also, there are proportionately more fatalities in daylight or twilight conditions at junctions. Use Cases are supposed to be derived from Accident Scenarios and by adding detailed information for example about the road layout, right-of-way and the vehicle trajectories prior to the collision. Instead of applying cluster algorithms to the accident data, a pragmatic approach was finally preferred to create them. Note: Use Cases serve as an intermediate step between the Accident Scenarios and the Test Scenarios which describe the actual testing conditions. Finally, 74 Use Cases were identified. This large number indicates the complexity of intersection crashes due to the combination of several parameters.
Test and assessment procedures for passive pedestrian protection of passenger cars are in place for many years within world-wide regulations as well as consumer test programmes. Nevertheless, recent accident investigations show a stagnation of pedestrian fatality numbers on European roads alongside increasing injury severities for older road users. The EU-funded SENIORS (Safety ENhancing Innovations for Older Road userS) project developed and evaluated a thorax injury prediction tool (TIPT) for later incorporation within test and assessment procedures. Accident data indicates an increasing portion of AIS2 and AIS3+ thoracic injuries of older pedestrians and cyclists which are currently not assessed in any test procedure for vulnerable road users. Therefore, SENIORS focused on the development of a test tool predicting the risk of rib fractures of vulnerable road users (VRU). While injury risk functions were reanalyzed, human body model (HBM) simulations against categorized generic vehicle frontends served as input for the definition of test setups and corresponding impact parameters. TIPT component tests against a generic frontend and an actual vehicle were used for the evaluation of the technical feasibility. The TIPT component tests shows the general feasibility of a test procedure for the assessment of thoracic injuries, with good repeatability and reproducibility of kinematics and results. Impact parameters such as the inclination angles of the thorax, angles of the velocity vector and impact speeds well replicate the parameters gained from the HBM simulations. The proposed markup and assessment scheme offers the possibility of a homogeneous evaluation of the protection potential of vehicle frontends while maintaining justifiable testing efforts. During evaluation testing, the proposed requirements were entirely met. The developed prototype of TIPT and launching system offer impact angles and speeds as suggested by HBM simulations. However, since thorax impacts during pedestrian accidents do not occur perpendicularly to the vehicle surface in most cases, the TIPT built-in linear potentiometers do not acquire the true resultant intrusions on the ribcage and thus, TIPT rib deflections do not reflect the actual human injury risk. However; for the impact forward to the bonnet leading edge, the TIPT seems applicable without further modifications. The test and assessment procedures using the TIPT offer for the first time the possibility of replicating the kinematics of a pedestrian thorax with a component test. The developed assessment scheme gives a first indication on how the risk for thoracic injuries could be implemented within the Euro NCAP Box 3 assessment. Future development of the TIPT may focus on implementing a rib cage that can deflect in all axes in a humanlike way.
Per definition, SAE Level 2 (L2) Systems perform both the lateral and longitudinal vehicle motion control with the expectation that the driver completes the Object and Event Detection and Response (OEDR). Since every system performs also parts of the OEDR itself and this amount of OEDR also varies between different L2 systems depending on the intended system design, it cannot be taken for granted that drivers automatically understand their roles and responsibilities in interaction with the system. Especially highly reliable L2 systems performing a greater amount of OEDR while at the same time requiring only little driver input over time can make it difficult for drivers to correctly identify their role and responsibility. Until now, neither application-oriented assessment methods nor design guidelines for OEDR related system design features taking safety of human-machine-interaction into account are available. The objective is therefore to deliver a standardized tool for the assessment of human-machine-interaction-related safety of vehicles with L2 systems currently available on the market. To evaluate the impact of different system design aspects on safety of human-machine-interaction and also to be able to differentiate between system designs, a holistic, standardized and application-oriented assessment procedure is proposed. The novel tablet-based assessment tool focuses not only on available standards and guidelines but measures also concrete user behaviour and user understanding in interaction with the L2 systems. The aim is to gain further insights which cannot be measured directly by simple checklist instruments. For preparation, based on international standards, literature reviews and expert consultations, a first checklistbased expert-evaluation for currently available vehicles with L2 systems was developed. These assessments are focusing on different sources of user information (e.g. user manual), human-machine-interface design as well as the prevention of unintended use by different driver monitoring techniques. The checklist-tool was developed in cooperation with experts of different EuroNCAP test laboratories and validated in a common expert workshop to gain high level of standardization and agreement. However, to assess safety of human-machine-interaction holistically beyond these rather explicit forms of information design criteria, also implicit forms of drivervehicle-communication via vehicle dynamics, functional behavior or reliability play an important role and should be taken into account. Therefore, the main and novel methodological aim is to consider also interaction related processes regarding user´s understanding of roles and responsibilities when applying automated driving functions as well as user´s awareness of automation modes or traffic situations in the modular tablet-based assessment tool.
Airbags are, together with the three-point belt, the most effective passive safety equipment of vehicles. However, literature shows that sound pressure levels of up to 170 dB can occur during airbag deployment. A literature review revealed no systematic experimental data on possible hearing loss by airbag deployment, that also takes any other crash accompanied noise into account, such as deformation and impact noise. Also the rising number of airbags per vehicle resulting in a higher number of deployed airbags in an accident was not addressed with respect to hearing loss. Thus, an extensive test matrix of noise measurements during airbag deployments was conducted including onboard measuring during crashes and static measurements. Dynamic and static experiments with single and multiple airbag deployments were conducted. The results of this study show, that in the analyzed crash constellations the acoustic emission of the collision as well as the car deformation can trigger the stapedius reflex before the airbag deployment. The stapedius reflex protects the inner ear at least partially in case of dangerous sound levels. However, it seems that multiple airbag deployments in a short sequence pose a considerable risk for hearing impairments despite the fully contracted stapedius muscle. Further and in line with Price et al. (2013) it was found that the risk of hearing loss is lower with closed windows. The analysis of patient and accident data showed no link between airbag deployment and hearing loss. This might be caused by low case numbers of reported hearing loss problems up to now. In conclusion the results show that a singular analysis of the sound pressure of airbag deployments without crash accompanied noises is not sufficient as the protective effect of the stapedius reflex is neglected. Still, successive airbag deployments in a short timeframe raise the risk of hearing loss. Further investigation on hearing impairment due to airbag deployment and triggering of the stapedius reflex is needed and the data acquisition of accidents and patients should consider hearing loss aspects.
Bicyclists and pedestrians belong to the most endangered groups in urban traffic. The EU-funded collaborative research project PROSPECT (‘PROactive Safety for PEdestrians and CyclisTs´) aims to significantly improve safety of those unprotected traffic participants by expanding the scope of scenarios covered by future active safety systems in passenger cars. Concepts for sensor control systems are built into three prototypes covering emergency interventions such as Autonomous Emergency Braking (AEB) as well as Autonomous Emergency Steering (AES). These systems tackle the well-known challenges of currently available systems including limited field-of-view by sensors, fuzzy path prediction, unreliable intent reaction times and slow reaction times. These highly innovative functions call for extensive validation methodologies based on already established consumer testing procedures. Since these functions are developed towards the prevention of intersection accidents in urban areas, a key aspect of the advanced testing methodology is the valid approximation of naturalistic trajectories using driving robots. Eventually, several simulator studies complemented a user acceptance and benefit analysis to evaluate the expected overall impact of the PROSPECT systems. The results achieved within the PROSPECT project are highly relevant for upcoming test protocols regarding the most critical situations with Vulnerable Road Users (VRU). With introducing the new methods in Euro NCAP (European New Car Assessment Programme) a significant increase in road safety is expected.
To assess occupant safety in a crash test, criteria associating the measurements made with a crash test dummy to injury risk are necessary. To enable better protection of elderly car occupants the objective of this study was to develop improved thoracic injury criteria for the THOR average male dummy. The development of these criteria is usually based on matched dummy and Post Mortem Human Surrogate (PMHS) tests by relating the obtained PMHS injuries to dummy measurements. This approach is limited, since only a few tests in relevant loading conditions are available and any new test series requires high efforts to be performed due to their complexity and costs. To overcome these limitations and to extend the dataset for the development of THOR dummy chest injury risk functions a simulation-based approach was applied within the EC funded project SENIORS (Safety Enhanced Innovations For older Road Users - www.seniors-project.eu). Within this study frontal impact sled simulations with an FE model representing a THOR average male dummy and matched simulations with a human body model (HBM) representing an elderly car occupant were carried out. The HBM used for this study was the THUMS TUC with modified rib cage, which was developed in SENIORS. The modifications included material and geometry changes aiming to represent an elderly car occupant. The rib fracture risk was predicted with a deterministic approach whereby a rib was considered broken when the strain exceeded an age-dependent threshold. Furthermore, a probabilistic method was applied to predict the probability of sustaining a certain number of fractured ribs by comparing local strain values to the distribution of cortical rib ultimate strain. By relating the output from the HBM simulations to a multi-point dummy injury criterion, injury risk curves were calculated by statistical methods. The wide range of loading conditions resulted in the desired range of injuries and THOR ATD output. The number of fractured ribs predicted by the HBM based on the deterministic prediction method was between 0 and 15. Furthermore, the probabilistic risk for the number of rib fractures equal or greater than two, three or four was calculated for each load case. The THOR rib deflection criterion Rmax was between 18 and 56 mm, while the PC Score was in the range of 2.5 to 7.2. Based on these outputs new risk curves for the predicted deterministic (AIS2+/3+) and probabilistic injury risk were calculated. The new curves show reasonable shapes and significance that provide trust in their application. The new risk curves are compared to risk curves obtained by traditional methods. The results were found similar to previous injury risk functions based on physical tests, which gives a high level of confidence in the chosen approach. The simulation-based approach of matched ATD model vs. HBM simulation was successfully applied. Rmax curves show a slightly better quality than the injury criterion PC Score.
Neue Herausforderungen an die Unfallforschung durch Fahrerassistenz und automatisiertes Fahren
(2019)
Unfallrekonstruktion hat die Ableitung von Maßnahmen zur Minimierung der Unfallfolgen ermöglicht, vor allem durch Verbesserungen bei passiven Sicherheitseinrichtungen, aber auch durch die Verbesserung der Rettungskette, beispielsweise eCall. Heute können aktive Sicherheitssysteme die Unfallfolgen bereits vor der eigentlichen Kollision reduzieren oder durch Umfeldwahrnehmung und mittels Eingriff in die Fahrzeugsteuerung gegebenenfalls sogar vollständig verhindern. Funktionen, die aktiv in die Fahrzeugsteuerung eingreifen, lassen sich nach ihrer Wirkweise unterscheiden: zum einen handelt es sich um kontinuierlich automatisierende Funktionen, die meist länger aktiv bleiben (zum Beispiel ACC). Zum anderen um Funktionen, die in kritischen Fahrsituationen temporär in die Fahrzeugsteuerung eingreifen. Aufgezeigt wird, welche Konsequenzen und Risiken in Bezug auf diese Systeme sowie für bestimmte (zum Beispiel kritikale) Fahrsituationen anzunehmen sind. Zur Bewertung von aktiven Reglern, die in kritischen Fahrsituationen eingreifen, sind Unfalldaten nur noch eingeschränkt tauglich. Ähnliches gilt für die Bewertung von Ereignissen/ Zuständen im Rahmen kontinuierlicher Fahrzeugsteuerung, vor allem, wenn diese weiter vorausliegen. Wirkzusammenhänge automatisierter Fahrfunktionen müssen jedoch - gerade für den Mischverkehr mit konventionell gesteuerten Fahrzeugen - identifiziert werden. Dafür wird eine Szenariendatenbank mit relevanten Verkehrssituationen benötigt, in die Daten aus Naturalistic Driving Studies (NDS), aus Fahrversuchen oder Versuchen im Fahrsimulator eingehen können. Die zunehmende Durchdringung der Fahrzeugflotte mit kontinuierlich automatisierten Fahrfunktionen lässt eine Abnahme kritischer Fahrsituationen und eine Reduktion der Zahl der Verkehrsopfer erwarten. Allerdings verbleibt eine Restzahl an systemimmanenten Unfällen, die als unvermeidbar gelten müssen.
Anhand von zwei verschiedenen Versuchskonfigurationen wurde das Schutzpotential von Kopfschutzsystemen (Fahrradhelm und airbagbasiertes System) untersucht. Hierbei wurden die resultierende Kopfbeschleunigung als Messwert sowie das Kopfverletzungskriterium HIC bei Versuchen ohne und mit Kopfschutzsystem vergleichend gegenübergestellt.
An Landstraßen ist das Abkommen von der Fahrbahn nach rechts (Unfallart 8) die häufigste Unfallart bei Unfällen mit Personenschaden und Unfällen mit Schwerverletzten (DESTATIS, 2012). Da sowohl zahlreiche internationale Untersuchungen für Autobahnen als auch einige wenige für Landstraßen gezeigt haben, dass ein nicht unerheblicher Anteil von Abkommensunfällen von der Fahrbahn nach rechts durch neben den Fahrstreifen in den Randstreifen eingefräste Rüttelstreifen vermieden werden können, war es Ziel dieser Untersuchung, eine geeignete Form von Rüttelstreifen für Landstraßen zu identifizieren und diese auf ausgewählten Pilotstrecken umzusetzen, um anschließend deren Sicherheitswirkung zu untersuchen. Da internationale Erfahrungen auch von einer positive Sicherheitswirkung von in den Mittelstreifen eingefrästen Rüttelstreifen berichten, sollte auch diese Maßnahme pilothaft betrachtet werden. Im ersten Untersuchungsteil wurden im Rahmen einer Literaturanalyse zunächst die internationalen Erfahrungen ausgewertet. Bezüglich der Form der Rüttelstreifen wurde schnell deutlich, dass auf Landstraßen sinus- oder ellipsenförmige Rüttelstreifen dem klassischen rechteckigen Rüttelstreifen vorzuziehen sind, da diese ein geringes Außengeräusch erzeugen und die Befahrbarkeit mit Einspurfahrzeugen (Fahrrad, Motorrad) unkritischer ist. Auf Basis der Erkenntnisse aus der Literatur wurden im nächsten Schritt für zwölf verschiedene Rüttelstreifenvarianten empirische Untersuchungen (Schwingungs-und Lärmmessungen mit Zweispurfahrzeugen sowie Fahrversuche mit Einspurfahrzeugen) auf einer abgesperrten Teststrecke durchgeführt. Die zwölf Rüttelstreifenvarianten unterschieden sich dabei sowohl hinsichtlich der Grundform als auch hinsichtlich der Abmessungen. Als Vorzugsvariante wurde eine völlig neue Form von Rüttelstreifen (Kombination aus Ellipsen-und Sinusform) identifiziert. Diese Form wurde im nächsten Schritt auf zwei geeigneten Pilotstrecken (4,15 km langer Abschnitt der B 55 bei Warstein in NW und 2,8 km langer Abschnitt der B 313 bei Trochtelfingen in BW) in den Randstreifen gefräst. Zudem wurde auf einem 2,75 km langen 2+1-Abschnitt der B 33 bei Triberg in BW der Rüttelstreifen in den Mittelstreifen eingefräst. Auf allen drei Pilotstrecken wurden die Rüttelstreifen im Jahr 2010 gefräst. Auf Basis eines dreijährigen Nachherzeitraums nach Fräsen der Rüttelstreifen lässt sich die Sicherheitswirkung wie folgt zusammenfassen: Die in den Randstreifen gefrästen Rüttelstreifen erwiesen sich auf den beiden Pilotstrecken als wirksame Maßnahme zur Reduktion von Abkommensunfällen von der Fahrbahn nach rechts (U-Art 8). Die positiven internationalen Erfahrungen konnten somit, wenngleich auch nur auf Basis einer äußerst geringen Datengrundlage, bestätigt werden. Für den 2+1-Abschnitt der B 33, auf dem die Rüttelstreifen im Mittelstreifen eingefräst wurden, zeigt sich, dass die Maßnahmenwirkung bezogen auf die Zusammenstöße mit dem Gegenverkehr (U-Art 4) und Abkommensunfälle von der Fahrbahn nach links (U-Art 9) zum Teil negativ ist. Entgegen der internationalen Erfahrungen konnte im Rahmen der durchgeführten Pilotstudie somit keine positive Maßnahmenwirkung festgestellt werden. Die im Rahmen der durchgeführten Pilotstudie an Landstraßen ermittelten Maßnahmenwirksamkeiten von in den Fahrbahnrand und in den Mittelstreifen gefrästen Rüttelstreifen konnten aufgrund des kleinen Stichprobenumfangs, der den Untersuchungen zugrunde lag, kein allgemeingültiges Ergebnis darstellen. Im Fall der in den Randstreifen gefrästen Rüttelstreifen konnten durch die Pilotstudien jedoch die positiven internationalen Erfahrungen mit dieser infrastrukturellen Maßnahme bestätigt werden, sodass deren Einsatz an spezifischen Problemstellen im Bestand unter den im Rahmen dieses Projekts definierten Randbedingungen als eine mögliche Maßnahme zur Verbesserung der Verkehrssicherheit in Betracht gezogen werden sollte. Ein flächendeckender Einsatz von in den Randstreifen gefrästen Rüttelstreifen auf Landstraßen erscheint vor dem Hintergrund der fortschreitenden Verbreitung von Spurhalteassistenten hingegen nicht angezeigt. Bezüglich der Wirksamkeit von in Mittelstreifen eingefrästen Rüttelstreifen konnten die positiven internationalen Erfahrungen mittels der betrachteten Pilotstrecke nicht bestätigt werden. Bevor jedoch diese Maßnahme endgültig verworfen wird, sollten hierzu weitere Untersuchungen durchgeführt werden. Abschließend wurde noch die Dauerhaftigkeit des im Jahr 2003 auf einem 36 km langen Abschnitt der BAB A 24 bei Herzsprung gefrästen rechteckigen Rüttelstreifens bewertet. Im Ergebnis der Laserprofilmessung konnten keine Kantenausbrüche sowohl längs als auch quer zur Fahrtrichtung festgestellt werden.
Ziel des Projektes war es zu ermitteln, ob und wenn ja unter welchen Bedingungen Elektrokleinstfahrzeuge im Straßenverkehr sicher betrieben werden können, welche technischen Anforderungen dafür notwendig sind und welches Konfliktpotential zu anderen Verkehrsteilnehmern zu erwarten ist. Stehend gefahrene (d.h. Fahrzeuge ohne Sitz z.B. Tretroller mit Elektrounterstützung) und selbstbalancierende Elektrokleinstfahrzeuge (z.B. dem Segway ähnliche) konnten bis 2016 nach der Rahmenrichtlinie 2002/24/EG (Typgenehmigungsvorschrift für Krafträder/Kategorie L-Fahrzeuge), die nun außer Kraft ist, genehmigt werden. Die dort genannten Anforderungen wurden durch die Elektrokleinstfahrzeuge größtenteils nicht erfüllt. Seit 2016 gilt die neue Typgenehmigungs-Verordnung (EU) 168/2013 für Krafträder. Nach dieser Verordnung kann die Genehmigung solcher Elektrokleinstfahrzeuge national geregelt werden, da die Verordnung diese definitiv vom Anwendungsbereich ausschließt. Um bei diesen Fahrzeugen national über eine Genehmigungsfähigkeit entscheiden zu können, wird zum einen eine Einschätzung zur Verkehrssicherheit solcher Fahrzeuge benötigt. Zum anderen müssen aus fahrdynamischen Versuchen Erkenntnisse gewonnen werden, um diese Fahrzeuge klassifizieren zu können und um jeweils Anforderungen festlegen zu können. Die BASt hat im Rahmen dieses Forschungsprojektes Vorschläge für eine derartige Klassifizierung von bestimmten Elektrokleinstfahrzeugen und für die zu stellenden technischen Anforderungen an diese Fahrzeuge erarbeitet, um diese Fahrzeuge sicher im Straßenverkehr verwenden zu können. In dem Forschungsprojekt wurden Elektrokleinstfahrzeuge in vier Teilstudien untersucht: Betrachtungen zur aktiven und passiven Sicherheit, zum Nutzerverhalten und zur Risikobewertung sowie zur Verkehrsfläche. Dabei wurde aufgezeigt, dass es möglich ist, neue Kategorien mit bestimmten Mindestanforderungen zu bilden. Es wird empfohlen, diese Anforderungen einzuhalten, sollten Elektrokleinstfahrzeuge zukünftig im öffentlichen Verkehr betrieben werden können und dürfen. Seitens der aktiven Sicherheit wurden mithilfe von fahrdynamischen Versuchen und technischen Untersuchungen Anforderungen erarbeitet, die das verkehrssicherheitstechnische Risiko bestmöglich minimieren. Weiterhin wurden Empfehlungen in Bezug auf die passive Sicherheit von Elektrokleinstfahrzeugen ausgesprochen, die ein Sicherheitsniveau gewährleisteten, das ähnlich zu heutigen bestehenden Fahrzeugen ist. Das subjektive Fahrverhalten zeigte, dass Elektrokleinstfahrzeuge grundsätzlich sicher vom Fahrer kontrollierbar sind, solange bestimmte Systemgrenzen eingehalten werden. Hinsichtlich der Aspekte des Nutzerverhaltens wurden Schutzausrüstung und das Kräfteverhältnis zu anderen Verkehrsteilnehmern bewertet. In Abhängigkeit von den vorgeschlagenen Fahrzeugkategorien werden entsprechende Verkehrsflächen für die Benutzung empfohlen, basierend auf der im öffentlichen Verkehr analysierten subjektiven Sicherheit und basierend auf einer Analyse des Konfliktpotenzials gegenüber anderen Verkehrsteilnehmern. Aus allen Ergebnissen des Projektes wurden Empfehlungen für die Nutzung der Verkehrsflächen sowie Anforderungen an die (sicherheits-) technische Ausstattung für die neu vorgeschlagenen Elektrokleinstfahrzeuge- Kategorien abgeleitet, die jeweils an Anforderungen für die bereits existierenden Fahrzeugkategorien "Leichtmofa" bzw. "Mofa" angelehnt sind.
2011 beauftragte das damalige Bundesministerium für Verkehr, Bau und Stadtentwicklung die BASt mit der wissenschaftlichen Begleitung des bundesweiten Feldversuchs mit Lang-Lkw. Lang-Lkw dürfen mit bis zu 25,25 m zwar um 6,50 m länger als nach den geltenden Regelungen ausgeführt sein; ein höheres Gesamtgewicht als die auch heute schon geltenden 40 t bzw. 44 t im Vor- und Nachlauf zum kombinierten Verkehr ist bei Lang-Lkw hingegen nicht zulässig. Der Versuch startete mit Wirkung vom 01.01.2012 und war auf die Dauer von fünf Jahren ausgelegt. Er ist Bestandteil des Aktionsplans Güterverkehr und Logistik des Bundesministeriums für Verkehr und digitale Infrastruktur. Die gesetzliche Grundlage zur Durchführung des Feldversuchs bildet die vom Bundesminister für Verkehr erlassene Verordnung über Ausnahmen von straßenverkehrsrechtlichen Vorschriften für Fahrzeuge und Fahrzeugkombinationen mit Überlänge, kurz LKWÜberlStVAusnV, vom 19.12.2011 sowie deren zugehörige Änderungs-Verordnungen. Eine der Vorgaben betraf zum Beispiel den auf ein geprüftes Streckennetz beschränkten Einsatz der Lang-Lkw, eine andere die Teilnahme an der wissenschaftlichen Begleitung. Der Zweck der wissenschaftlichen Begleitung bestand unter anderem in einer Versachlichung des Themas "Längere Lkw". Ausgehend von den Argumenten gegen längere und schwerere Lkw aus der Vergangenheit wurden auch gegen die im Feldversuch ausschließlich adressierte Vergrößerung der Länge von Interessenvertretern der Bahn, von Umweltverbänden, aber auch Automobilclubs Bedenken geäußert. Die Kritik betrifft prinzipiell und relativ pauschal folgende drei zentrale Punkte: - Die Verkehrssicherheit würde durch größere und/oder schwerere Lkw gefährdet. - Die Infrastruktur würde durch größere und/oder schwerere Lkw derart beansprucht, dass eine Ertüchtigung und/oder Instandsetzung die Allgemeinheit mit enormen Kosten belasten würde. - Durch die zu erwartende Effizienzsteigerung und damit einhergehenden Kostenvorteile im Straßengüterverkehr würden Transporte von der Schiene auf die Straße verlagert und/oder neue Verkehre auf der Straße induziert, sodass schließlich nicht weniger, sondern mehr Straßengüterverkehr stattfinden würde. Auch der Umstand, dass es sich beim Lang-Lkw um ausschließlich längere, nicht aber schwerere Lkw handelt, hat keine grundlegende Veränderung in der Diskussion gebracht. Ziel der Konzeption der wissenschaftlichen Begleitung war es, alle in der Öffentlichkeit diskutierten Hoffnungen in und Bedenken gegen den Einsatz von Lang-Lkw umfassend zu berücksichtigen. Aufbauend auf einer internationalen Literaturstudie und unter Berücksichtigung der rechtlichen Rahmenbedingungen sowie öffentlichen Diskussion wurden diejenigen Aspekte ermittelt und aufgelistet, die als mögliche Chancen und Risiken für einen Einsatz von Lang-Lkw in den verschiedenen Quellen benannt wurden. Diese Liste wurde im Rahmen eines Expertenkolloquiums im Mai 2011 diskutiert und weiterentwickelt. Zur Beantwortung der identifizierten Fragestellungen wurden mehrere Forschungsprojekte initiiert und im Feldversuchs zum Teil von der BASt selbst, überwiegend jedoch von externen Forschungsinstituten bearbeitet. Der zum Ende des Feldversuchs vorgelegte Abschlussbericht der BASt enthält neben den für die Konzeption der Gesamtuntersuchung erforderlichen rechtlichen Grundlagen und vorliegenden Erkenntnissen aus der Literatur die Zusammenfassungen der verschiedenen Forschungsprojekte aus allen Untersuchungsphasen der wissenschaftlichen Begleitung. Zusammenfassend ist zu konstatieren, dass sich bedeutende Probleme im Feldversuch nicht gezeigt haben. Gemessen an der Vielzahl betrachteter Fragestellungen ist die Anzahl der identifizierten potenziellen Herausforderungen gering. Zudem können die identifizierten Herausforderungen bei der derzeit vorhandenen Anzahl an im Feldversuch beteiligten Lang-Lkw und auch noch unter der Annahme von deutlich höheren als im Rahmen der Untersuchungen zu den Verkehrsnachfragewirkungen prognostizierten Anteilen von Lang-Lkw am Güterverkehrsaufkommen als hinnehmbar oder beherrschbar eingestuft werden. Es kann zudem festgehalten werden, dass der Einsatz des Lang-Lkw eine positive Verkehrsnachfragewirkung bezüglich einer Reduktion von gefahrenen Lkw-Kilometern und dementsprechend auch eine Reduktion von Klimagasen und Luftschadstoffen im Versuch gezeigt hat und zukünftig haben kann. Es zeigte sich bislang, dass Verlagerungseffekte von der Bahn beziehungsweise vom Binnenschiff auf den Lang-Lkw vor allem aufgrund der bestehenden Gewichts-, aber auch der tatsächlichen beziehungsweise im Modell angenommenen Streckenbeschränkungen sehr gering und damit vernachlässigbar sind. Wenngleich deutlich wird, dass der Lang-Lkw nur eine mögliche Teillösung zur Eindämmung des Güterverkehrswachstums und den damit einhergehenden Umweltwirkungen darstellt, ist der Einsatz aus betriebswirtschaftlicher und verkehrsnachfrageseitiger Sicht in bestimmten Bereichen und Einsatzfeldern sinnvoll.
Established in 1997, the European New Car Assessment Programme (Euro NCAP) provides consumers with a safety performance assessment for the majority of the most popular cars in Europe. Thanks to its rigorous crash tests, Euro NCAP has rapidly become an important driver safety improvement to new cars. After ten years of rating vehicles, Euro NCAP felt that a change was necessary to stay in tune with rapidly emerging driver assistance and crash avoidance systems and to respond to shifting priorities in road safety. A new overall rating system was introduced that combines the most important aspects of vehicle safety under a single star rating. The overall rating system has allowed Euro NCAP to continue to push for better fitment and higher performance for vehicles sold on the European market. In the coming years, the safety rating is expected to play an important role in the support of the roll-out of highly automated vehicles.
Estimation of the effects of new emission standards on motorcycle emissions by means of modeling
(2016)
Road traffic is, in addition to the energy sector and the industry, one main source of air pollution and carbon dioxide emissions. Although most countries and manufacturers agreed to environmental regulations to reduce the pollutant emissions, particularly in urban areas with high traffic density, the impact of road traffic emissions on the environment and human health has been growing in importance steadily. Due to stricter emission standards and the binding use of emission-reducing systems (e.g. three-way catalyst) hydrocarbon emissions from passenger cars have been reduced significantly since the last two decades. Unlike to passenger cars the emissions standards of powered two-wheelers have not been adjusted since 2006 although their share of hydrocarbon emissions to the total amount of hydrocarbon emissions of road traffic is estimated to be disproportionately high. Due to the new regulation (EU) No. 168/2013 powered two-wheelers have to fulfill new emission standards from 2016 (Euro 4) and 2020 (Euro 5) onwards. Besides new limits for the tailpipe emissions the evaporative emissions are regulated separately for the first time, as they make up a high proportion to the total hydrocarbon emissions in this vehicle class. In this context, the calculation and forecast of road traffic emissions is an important tool to verify compliance of climate targets and to assess the reduction potential of emission-reducing systems. For that purpose the Federal Highway Research Institute (BASt) uses the emission- and calculation tool TREMOD (Transport Emission Model) which provides baseline data and calculated results for pollutants in almost every differentiation e.g. vehicle category, traffic situation and road type. Moreover, estimations of future emission trends, stock information and mileage distribution can be made. The main objective is to illustrate the impact of the upcoming emission standards Euro 4 and Euro 5 on the operational hydrocarbon emissions of powered two-wheelers based on statistical estimations. The significant aspect is to generate scenarios to show the reduction potential of hydrocarbon emissions of powered two-wheelers, differentiated into motorcycles and small motorcycles, in relation to the total share of hydrocarbon emissions in this vehicle class and to the total hydrocarbon emissions from road traffic. As a part of their research, the authors can make initial statements about the possible effect of the new emission standards of regulation (EU) No. 168/2013 by means of modeling with TREMOD.
Die Kommunikation zwischen Fahrzeugen und Infrastrukturkomponenten steht vor der Einführung in Europa. Dieser Beitrag stellt zunächst die grundlegende Technologie zum Austausch von Nachrichten und ein Pilotprojekt vor, innerhalb dessen eine sichere Fahrzeug-zu-Infrastruktur Kommunikation konzipiert und praktisch erprobt wird. Darauf aufbauend werden Sicherheitsfragestellungen von Infrastrukturkomponenten beleuchtet und ein Einblick in das Schlüsselmanagement sowohl für Fahrzeuge als auch Infrastrukturkomponenten gegeben.
Except for corrective steering functions automatic steering is up to now only allowed at speeds up to 10 km/h according to UN Regulation No. 79. Progress in automotive engineering with regard to driver assistance systems and automation of driving tasks is that far that it would be technically feasible to realise automatically commanded steering functions also at higher vehicle speeds. Besides improvements in terms of comfort these automated systems are expected to contribute to road traffic safety as well. However, this safety potential will only be exhausted if automated steering systems are properly designed. Especially possible new risks due to automated steering have to be addressed and reduced to a minimum. For these reasons work is currently ongoing on UNECE level with the aim to amend the regulation dealing with provisions concerning the approval of steering equipment. It is the aim to revise requirements for automatically commanded steering functions (ACSF) so that they can be approved also for higher speeds if certain performance requirements are fulfilled. The paper at hand describes the derivation of reasonable system specifications from an analysis of relevant driving situations with an automated steering system. Needs are explained with regard to covering normal driving, sudden unexpected critical events, transition to manual driving, driver availability and manoeuvres to reach a state of minimal risk. These issues form the basis for the development of test procedures for automated steering to be implemented in international regulations. This holds for system functionalities like automatic lane keeping or automatic lane change as well as for addressing transition situations in which the system has to hand over steering to the driver or addressing emergency situations in which the system has to react instead of the driver.
One main objective of the EU-Project SENIORS is to provide improved methods to assess thoracic injury risk to elderly occupants. In contribution to this task paired simulations with a THOR dummy model and human body model will be used to develop improved thoracic injury risk functions. The simulation results can provide data for injury criteria development in chest loading conditions that are underrepresented in PMHS test data sets that currently proposed risk functions are based on. To support this approach a new simplified generic but representative sled test fixture and CAE model for testing and simulation were developed. The parameter definition and evaluation of this sled test fixture and model is presented in this paper. The justification and definition of requirements for this test set-up was based on experience from earlier studies. Simple test fixtures like the gold standard sled fixture are easy to build and also to model in CAE, but provide too severe belt-only loading. On the other hand a vehicle buck including production components like airbag and seat is more representative, but difficult to model and to be replicated at a different laboratory. Furthermore some components might not be available for physical tests at later stage. The basis of the SENIORS generic sled test set-up is the gold standard fixture with a cable seat back and foot rest. No knee restraint was used. The seat pan design was modified including a seat ramp. The three-point belt system had a generic adjustable load limiter. A pre-inflated driver airbag assembly was developed for the test fixture. Results of THOR test and simulations in different configurations will be presented. The configurations include different deceleration pulses. Further parameter variations are related to the restraint system including belt geometry and load limiter levels. Additionally different settings of the generic airbag were evaluated. The test set-up was evaluated and optimized in tests with the THOR-M dummy in different test configurations. Belt restraint parameters like D-ring position and load limiter setting were modified to provide moderate chest loading to the occupant. This resulted in dummy readings more representative of the loading in a contemporary vehicle than most available PMHS sled tests reported in the literature. However, to achieve a loading configuration that exposes the occupant to even less severe loading comparable to modern vehicle restraints it might be necessary to further modify the test set-up. The new generic sled test set-up and a corresponding CAE model were developed and applied in tests and simulations with THOR. Within the SENIORS project with this test set-up also volunteer and PMHS as well as HBM simulations are performed, which will be reported in other publications. The test environment can contribute in future studies to the assessment of existing and new frontal impact dummies as well as dummy improvements and related instrumentation. The test set-up and model could also serve as a new standard test environment for PMHS and volunteer tests as well as HBM simulations.