Sonstige
Filtern
Erscheinungsjahr
Dokumenttyp
- Konferenzveröffentlichung (404) (entfernen)
Schlagworte
- Conference (324)
- Konferenz (320)
- Germany (151)
- Accident (150)
- Unfall (150)
- Deutschland (149)
- Injury (101)
- Verletzung (100)
- Unfallrekonstruktion (81)
- Analyse (math) (64)
- Analysis (math) (63)
- Statistics (63)
- Statistik (62)
- Schweregrad (Unfall, Verletzung) (59)
- Severity (accid, injury) (57)
- Tödlicher Unfall (56)
- Fatality (55)
- Safety (54)
- Sicherheit (53)
- Reconstruction (accid) (52)
- Bewertung (50)
- Evaluation (assessment) (49)
- Simulation (49)
- Datenbank (46)
- Fußgänger (45)
- Pedestrian (45)
- injury) (45)
- On the spot accident investigation (43)
- Schweregrad (Unfall (43)
- Verletzung) (43)
- Car (42)
- Data acquisition (42)
- Datenerfassung (42)
- Untersuchung am Unfallort (42)
- Severity (accid (40)
- Cause (39)
- Driver (39)
- Ursache (39)
- Fahrer (37)
- Fahrzeug (37)
- Unfallverhütung (36)
- Collision (35)
- Vehicle (35)
- Zusammenstoß (35)
- Anfahrversuch (34)
- Accident prevention (31)
- Radfahrer (31)
- Cyclist (30)
- Data bank (30)
- Accident reconstruction (29)
- Test (29)
- Europa (28)
- Europe (28)
- Frontalzusammenstoß (28)
- Prüfverfahren (28)
- Test method (28)
- Head on collision (27)
- Motorcyclist (27)
- Motorradfahrer (27)
- Versuch (27)
- Geschwindigkeit (26)
- Fahrerassistenzsystem (25)
- Impact test (veh) (25)
- Method (25)
- Speed (25)
- Active safety system (24)
- Leistungsfähigkeit (allg) (24)
- Passives Sicherheitssystem (23)
- Risiko (23)
- Verfahren (23)
- Aktives Sicherheitssystem (22)
- Insasse (22)
- Driver assistance system (21)
- Efficiency (21)
- PKW (21)
- Alte Leute (20)
- Passive safety system (20)
- Pkw (20)
- Interview (19)
- Old people (19)
- Risk (19)
- Vehicle occupant (19)
- Child (17)
- Kind (17)
- Prevention (17)
- Accident rate (16)
- Benutzung (16)
- Improvement (16)
- Sicherheitsgurt (16)
- Use (16)
- Verbesserung (16)
- Anthropometric dummy (15)
- Behaviour (15)
- Biomechanics (15)
- Biomechanik (15)
- Motorrad (15)
- Risikobewertung (15)
- Seitlicher Zusammenstoß (15)
- Unfallhäufigkeit (15)
- Verhalten (15)
- Berechnung (14)
- Database (14)
- Head (14)
- Kopf (14)
- Measurement (14)
- Messung (14)
- Motorcycle (14)
- Risk assessment (14)
- Safety belt (14)
- Side impact (14)
- Specifications (14)
- Calculation (13)
- Digital model (13)
- Driving aptitude (13)
- Leg (human) (13)
- Numerisches Modell (13)
- Richtlinien (13)
- Verminderung (13)
- Auffahrunfall (12)
- Brustkorb (12)
- Decrease (12)
- Development (12)
- Dummy (12)
- Entwicklung (12)
- Fahrzeugsitz (12)
- Rear end collision (12)
- Rechenmodell (12)
- Überschlagen (12)
- Airbag (11)
- Error (11)
- Fahrzeugführung (11)
- Human factor (11)
- Legislation (11)
- Mathematical model (11)
- Menschlicher Faktor (11)
- Prognose (11)
- Schutzhelm (11)
- Seat (veh) (11)
- Skill (road user) (11)
- Bremsung (10)
- Crash helmet (10)
- Driving (veh) (10)
- EU (10)
- Fahranfänger (10)
- Fehler (10)
- Gesetzgebung (10)
- Overturning (veh) (10)
- Recently qualified driver (10)
- Thorax (10)
- Tunnel (10)
- Air bag (restraint system) (9)
- Austria (9)
- Bein (menschl) (9)
- Braking (9)
- Deformation (9)
- Driver training (9)
- Front (9)
- Instandsetzung (9)
- Japan (9)
- Krankenhaus (9)
- Lorry (9)
- Metal bridge (9)
- Modification (9)
- Orthotropic plate (9)
- Planning (9)
- Repair (9)
- Sachschaden (9)
- Stahlbrücke (9)
- Verhütung (9)
- Veränderung (9)
- Österreich (9)
- Age (8)
- Alter (8)
- Bemessung (8)
- Blood alcohol content (8)
- Blutalkoholgehalt (8)
- Bridge (8)
- Damage (8)
- Drunkenness (8)
- Forecast (8)
- Hospital (8)
- Medizinische Untersuchung (8)
- Planung (8)
- Road network (8)
- Straßennetz (8)
- Trunkenheit (8)
- Verformung (8)
- Verkehrsinfrastruktur (8)
- Wirbelsäule (8)
- Antikollisionssystem (7)
- Belastung (7)
- Blood (7)
- Blut (7)
- Cracking (7)
- Design (overall design) (7)
- Einstellung (psychol) (7)
- Erste Hilfe (7)
- Erziehung (7)
- Expert opinion (7)
- Fahrausbildung (7)
- Fahreignung (7)
- Fracture (bone) (7)
- Frau (7)
- Gutachten (7)
- Illness (7)
- Impact study (7)
- International (7)
- Knee (human) (7)
- Knochenbruch (7)
- Krankheit (7)
- Load (7)
- Medical examination (7)
- Policy (7)
- Politik (7)
- Rissbildung (7)
- Standardisierung (7)
- Transport infrastructure (7)
- USA (7)
- Vereinigtes Königreich (7)
- Adolescent (6)
- Air pollution (6)
- Attitude (psychol) (6)
- Cervical vertebrae (6)
- Chemical analysis (6)
- Chemische Analyse (6)
- China (6)
- Collision avoidance system (6)
- Cost benefit analysis (6)
- Detection (6)
- Education (6)
- Fahrgeschicklichkeit (6)
- Halswirbel (6)
- Human body (6)
- Impact test (6)
- India (6)
- Indien (6)
- Interior (veh) (6)
- Jugendlicher (6)
- Knie (menschl) (6)
- Knotenpunkt (6)
- Leistungsfähigkeit (Fahrer) (6)
- Luftverunreinigung (6)
- Menschlicher Körper (6)
- Nitrogen oxide (6)
- Ort (Position) (6)
- Orthotrope Fahrbahntafel (6)
- Portugal (6)
- Road construction (6)
- Software (6)
- Spinal column (6)
- Standardization (6)
- Steifigkeit (6)
- Stiffness (6)
- Straßenbau (6)
- Traffic (6)
- Verkehr (6)
- Vorn (6)
- Wirksamkeitsuntersuchung (6)
- Wirtschaftlichkeitsrechnung (6)
- Woman (6)
- Analyse (Math) (5)
- Angle (5)
- Bau (5)
- Bearing capacity (5)
- Bremse (5)
- Brücke (5)
- Classification (5)
- Construction (5)
- Correlation (math, stat) (5)
- Dauerhaftigkeit (5)
- Decision process (5)
- Delivery vehicle (5)
- Detektion (5)
- Droge (5)
- Drugs (5)
- Durability (5)
- Eins (5)
- Electronic stability program (5)
- Entscheidungsprozess (5)
- Fahrstabilität (5)
- Fahrzeuginnenraum (5)
- Fernverkehrsstraße (5)
- Finite element method (5)
- First aid (5)
- Forschungsarbeit (5)
- France (5)
- Frankreich (5)
- Highway (5)
- Information (5)
- Klassifizierung (5)
- Location (5)
- Main road (5)
- Medical aspects (5)
- Medizinische Gesichtspunkte (5)
- Mobility (5)
- Mobilität (5)
- Oberfläche (5)
- One (5)
- Post crash (5)
- Research project (5)
- Schweissen (5)
- Sensor (5)
- Stickoxid (5)
- Straße (5)
- Surface (5)
- Surfacing (5)
- Technologie (5)
- Technology (5)
- Tragfähigkeit (5)
- United Kingdom (5)
- Vehicle handling (5)
- Verkehrsteilnehmer (5)
- Welding (5)
- Winkel (5)
- Abdomen (4)
- Alcohol test (4)
- Alkoholtest (4)
- Arbeitsgruppe (4)
- Autobahn (4)
- Automatisch (4)
- Balken (4)
- Beam (4)
- Berufsausübung (4)
- Bicycle (4)
- Blech (4)
- Boden (4)
- Brake (4)
- Camera (4)
- Coefficient of friction (4)
- Collision test (veh) (4)
- Compatibility (4)
- Concentration (chem) (4)
- Deformable barrier (impact test) (4)
- Distraction (4)
- Driver information (4)
- Dynamics (4)
- Dynamik (4)
- Elektronisches Stabilitätsprogramm (4)
- Estimation (4)
- Fahrdatenschreiber (4)
- Fahrrad (4)
- Fahrtüchtigkeit (4)
- Fire (4)
- Geschichte (4)
- History (4)
- Impact sled (4)
- Information documentation (4)
- Junction (4)
- Kamera (4)
- Kompatibilität (4)
- Kontrolle (4)
- Korrelation (math, stat) (4)
- LKW (4)
- Lieferfahrzeug (4)
- Life cycle (4)
- Lkw (4)
- Man (4)
- Mann (4)
- Methode der finiten Elemente (4)
- Modell (4)
- Nanotechnologie (4)
- Nanotechnology (4)
- Oberflächentextur (4)
- Occupant (veh) (4)
- Occupation (4)
- Organisation (4)
- Oxid (4)
- Oxide (4)
- Probability (4)
- Quer (4)
- Regression analysis (4)
- Regressionsanalyse (4)
- Reibungsbeiwert (4)
- Reinforcement (gen) (4)
- Reproducibility (4)
- Reproduzierbarkeit (4)
- Rigid pavement (4)
- Risk taking (4)
- Road user (4)
- Schrägseilbrücke (4)
- Schweden (4)
- Seite (4)
- Sheet (metal) (4)
- Sichtbarkeit (4)
- Soil (4)
- Stadt (4)
- Stayed girder bridge (4)
- Straßenverkehrsrecht (4)
- Surface texture (4)
- Surveillance (4)
- Titan (4)
- Titanium (4)
- Traffic regulations (4)
- Transverse (4)
- Unfallfolgemaßnahme (4)
- Unterleib (4)
- Urban area (4)
- Verstärkung (allg) (4)
- Sichtbarkeit (4)
- Wahrscheinlichkeit (4)
- Working group (4)
- Abkommen von der Fahrbahn (Unfall) (3)
- Ablenkung (psychol) (3)
- Adaptation (psychol) (3)
- Administration (3)
- Advanced driver assistance system (3)
- Anpassung (psychol) (3)
- Arzneimittel (3)
- Attention (3)
- Aufmerksamkeit (3)
- Aufprallschlitten (3)
- Auftrag (3)
- Ausrüstung (3)
- Australia (3)
- Australien (3)
- Automatic (3)
- Autonomes Fahren (3)
- Autonomes Fahrzeug (3)
- Autonomous driving (3)
- Autonomous vehicle (3)
- Befreiung (Bergung) (3)
- Bein (3)
- Beinahe Unfall (3)
- Beschichtung (3)
- Betonstraße (Oberbau) (3)
- Blickfeld (3)
- Brand (3)
- Bridge deck (3)
- Brückenbelag (3)
- Cable (3)
- Case law (3)
- Cement (3)
- Coating (3)
- Concrete (3)
- Contract (3)
- Cost (3)
- Crash test (3)
- Czech Republic (3)
- Decke (Straße) (3)
- Deformierbare Barriere (Anpralltest) (3)
- Digitale Bildverarbeitung (3)
- Earthworks (3)
- Effectiveness (3)
- Electric vehicle (3)
- Elektrofahrzeug (3)
- Environment (3)
- Equipment (3)
- Erdarbeiten (3)
- Ermüdung (mater) (3)
- Event data recorder (road vehicle) (3)
- Extrication (3)
- Fahrbahntafel (3)
- Fahrsimulator (3)
- Field of vision (3)
- Financing (3)
- Finanzierung (3)
- Fuge (3)
- Fugenfüllung (3)
- Gefahrenabwehr (3)
- Gemeindeverwaltung (3)
- Genauigkeit (3)
- Gesetzesdurchführung (3)
- Government (national) (3)
- Grenzwert (3)
- Griffigkeit (3)
- Hazard (3)
- Head restraint (3)
- Installation (3)
- Joint (structural) (3)
- Kleidung (3)
- Konzentration (chem) (3)
- Kopfstütze (3)
- Korea (Süd) (Demokratische Republik) (3)
- Kosten (3)
- Langfristig (3)
- Lebenszyklus (3)
- Limit (3)
- Local authority (3)
- Long term (3)
- Medication (3)
- Model (not math) (3)
- Montage (3)
- Motorway (3)
- Near miss (3)
- Netherlands (3)
- Niederlande (3)
- Norm (tech) (3)
- Orthotrope Platte (3)
- Overlapping (3)
- Passenger (3)
- Personal (3)
- Personnel (3)
- Police (3)
- Polizei (3)
- Psychologie (3)
- Psychology (3)
- Public transport (3)
- Reaction (human) (3)
- Reaktionsverhalten (3)
- Rechtsprechung (3)
- Recording (3)
- Rehabilitation (3)
- Rehabilitation (road user) (3)
- Reinforcement (in mater) (3)
- Republic of Korea (3)
- Run off the road (accid) (3)
- Schutzeinrichtung (3)
- Security (3)
- Severity (acid (3)
- Shock (3)
- Simulator (driving) (3)
- Skidding resistance (3)
- Spain (3)
- Spanien (3)
- Specification (standard) (3)
- Steife (Brücke) (3)
- Stiffener (Bridge) (3)
- Straßenverkehr (3)
- Theorie (3)
- Theory (3)
- Tschechische Republik (3)
- Umwelt (3)
- Unfallschwerpunkt (3)
- United kingdom (3)
- Verschiebung (3)
- Versuchspuppe (3)
- Verwaltung (3)
- Vorne (3)
- Zement (3)
- Öffentlicher Verkehr (3)
- Abbiegen (2)
- Abdichtung (2)
- Acceleration (2)
- Accident black spot (2)
- Accident proneness (2)
- Accuracy (2)
- Adult (2)
- Aggression (psychol) (2)
- Alcohol (2)
- Alkohol (2)
- Anti locking device (2)
- Antiblockiereinrichtung (2)
- Audit (2)
- Aufzeichnung (2)
- Automatische Notbremsung (2)
- Autonomous emergency braking (2)
- Ballungsgebiet (2)
- Behinderter (2)
- Beschleunigung (2)
- Beton (2)
- Bewehrung (2)
- Blutkreislauf (2)
- Body (car) (2)
- Bremsweg (2)
- Bridge surfacing (2)
- Budget (2)
- Bus (2)
- CEN (2)
- Chromatographie (2)
- Chromatography (2)
- Circulation (blood) (2)
- Clothing (2)
- Coach (2)
- Communication (2)
- Compliance (specif) (2)
- Composite bridge (2)
- Condition survey (2)
- Contact (tyre road) (2)
- Continuous (2)
- Conurbation (2)
- Crash victim (2)
- Crashtest (2)
- Crossing the road (2)
- Cycle track (2)
- Damping (2)
- Data base (2)
- Data security (2)
- Datensicherheit (2)
- Depth (2)
- Deutschalnd (2)
- Digital image processing (2)
- Disablement (2)
- Dreidimensional (2)
- Dämpfung (2)
- EU directive (2)
- EU-Richtlinie (2)
- Edge (2)
- Eigenschaft (2)
- Eindringung (2)
- Eingabedaten (2)
- Electric bicycle (2)
- Electronic driving aid (2)
- Elektrofahrrad (2)
- Emission control (2)
- Emissionskontrolle (2)
- Enforcement (law) (2)
- Entdeckung (2)
- Erfahrung (menschl) (2)
- Ergonomics (2)
- Ergonomie (2)
- Erwachsener (2)
- Eu (2)
- European Union (2)
- Experience (human) (2)
- Fahrbahnüberquerung (2)
- Fahrerinformation (2)
- Fahrernachschulung (2)
- Fahrerweiterbildung (2)
- Fahrtauglichkeit (2)
- Faserbewehrter Beton (2)
- Fatigue (human) (2)
- Fatigue (mater) (2)
- Festigkeit (2)
- Fiber reinforced concrete (2)
- Finland (2)
- Finnland (2)
- Foot (not a measure) (2)
- Frequency (2)
- Fuß (2)
- Gas (2)
- Geländefahrzeug (2)
- Geologie (2)
- Geomembran (2)
- Geomembrane (2)
- Gesetzesübertretung (2)
- Gewicht (2)
- Group analysis (test) (2)
- Haftung (jur) (2)
- Harmonisation (2)
- High performance concrete (2)
- Highway design (2)
- Hinten (2)
- Input data (2)
- Intelligent transport system (2)
- Intersection (2)
- Joint sealing (2)
- Karosserie (2)
- Kommunikation (2)
- Kontakt Reifen Straße (2)
- Kontinuierlich (2)
- Learning (2)
- Lebensdauer (2)
- Length (2)
- Liability (2)
- Longitudinal (2)
- Längs (2)
- Lärm (2)
- Lärmschutzwand (2)
- Maintenance (2)
- Methode der finite Elemente (2)
- Mittelwert (2)
- Mobile phone (2)
- Mobiltelefon (2)
- Movement (2)
- Müdigkeit (2)
- Noise (2)
- Noise barrier (2)
- Nutzwertanalyse (2)
- Offence (2)
- Organization (2)
- Organization (association) (2)
- Output (2)
- PVC (2)
- Penetration (2)
- Polyvinylchloride (2)
- Posture (2)
- Privatisierung (2)
- Properties (2)
- Prototyp (2)
- Prototype (2)
- Psychological aspects (2)
- Psychological examination (2)
- Psychologische Gesichtspunkte (2)
- Psychologische Untersuchung (2)
- Public private partnership (2)
- Pylon (2)
- Quality (2)
- Qualität (2)
- Radweg (2)
- Rail traffic (2)
- Rear (2)
- Regierung (staat) (2)
- Reifenprofil (2)
- Reisebus (2)
- Responsibility (2)
- Restraint system (2)
- Retraining of drivers (2)
- Ringanalyse (2)
- Risikoverhalten (2)
- Road traffic (2)
- Rücksichtslosigkeit (2)
- Safety fence (2)
- Schienenverkehr (2)
- Schlag (2)
- Schleudertrauma (2)
- Schutz (2)
- Schweiz (2)
- Seil (2)
- Seminar (2)
- Side (2)
- Sport utility vehicle (2)
- Straßenentwurf (2)
- Strength (mater) (2)
- Stress (psychol) (2)
- Sweden (2)
- Switzerland (2)
- Telecommunication (2)
- Telefon (2)
- Telekommunikation (2)
- Telephone (2)
- Three dimensional (2)
- Tiefe (2)
- Time (2)
- Trapezförmiger Träger (2)
- Trapezoidal beam (2)
- Trend (stat) (2)
- Turn (2)
- Tyre tread (2)
- Umweltverträglichkeitsprüfung (2)
- Unfallneigung (2)
- Unfallopfer (2)
- Unterhaltung (2)
- Value analysis (2)
- Vegetation (2)
- Vehicle regulations (2)
- Verantwortung (2)
- Verbundbrücke (2)
- Vorschrifteneinhaltung (2)
- Wasser (2)
- Water (2)
- Waterproofing (2)
- Weight (2)
- Wet road (2)
- Whiplash injury (2)
- Windschutzscheibe (2)
- Zeit (2)
- Zeitreihe (stat) (2)
- Zustandsbewertung (2)
- Überlappung (2)
- (menschl) (1)
- Abgaben (1)
- Ability (road user) (1)
- Abkommen von der Fahrbahn (1)
- Ablenkung (1)
- Absorption (1)
- Abstandsregeltempomat (1)
- Acceptability (1)
- Accident data (1)
- Accident prone location (1)
- Accident severity (1)
- Active safety (1)
- Active safety system; Automatic; Brake; Car; Collision avoidance system; Conference; Driver assistance system; Germany; Impact test (veh); Rear end collision; Severity (accid (1)
- Activity report (1)
- Adaptive cruise controll (1)
- Addiction (1)
- Aesthetics (1)
- Aethanol (1)
- Aged people (1)
- Ageing (1)
- Aggression (psycho) (1)
- Aggressiveness (psychol) (1)
- Air quality management (1)
- Air traffic control (1)
- Airbag (restraint system) (1)
- Aktive Sicherheit (1)
- Alterung (mater) (1)
- Aluminat (1)
- Aluminate (1)
- Analyse (1)
- Analyses (math) (1)
- Anchorage (1)
- Animal (1)
- Anthropometrie (1)
- Anthropometry (1)
- Apparatus (measuring) (1)
- Arbeitsplatz (1)
- Arm (human) (1)
- Arm (menschl) (1)
- Asphaltoberbau (1)
- Atem (1)
- Atives Sicherheitssystem (1)
- Auffharunfall (1)
- Aufzeichung (1)
- Ausführungsfehler (1)
- Auslaugung (1)
- Autotür (1)
- Average (1)
- Back (human) (1)
- Batterie (1)
- Battery (1)
- Baum (1)
- Baumusterzulassung (1)
- Bein [menschl] (1)
- Bepflanzung (1)
- Beton ; Betonstraße (Oberbau) (1)
- Bevölkerung (1)
- Bicyclist (1)
- Bindemittel (1)
- Binder (1)
- Black ice (1)
- Blasting (1)
- Bone (1)
- Brain (1)
- Braking distance (1)
- Brasilien (1)
- Brazil (1)
- Breaking (1)
- Breath (1)
- Bridge management system (1)
- Brittleness (1)
- Bruch (mech) (1)
- Brücken Management System (1)
- Bypass (loop road) (1)
- Cadaver (1)
- Calcium (1)
- Calibration (1)
- Cantilever (1)
- Car door (1)
- Carbon dioxide (1)
- Carriageway (1)
- Case study (1)
- Chassis (1)
- Chest (1)
- Clay (1)
- Climate change (1)
- Cognitive impairment (1)
- Colthing (1)
- Comprehension (1)
- Compression (1)
- Computation (1)
- Conference; Germany; Injury; Medical examination; Spinal column; X ray (1)
- Contact (tyre (1)
- Contractor (1)
- Cooperative intelligent transport system (1)
- Corrosion (1)
- Costs (1)
- Crash Test (1)
- Critical path method (1)
- Cross roads (1)
- Cross section (1)
- Customer (1)
- Cycling (1)
- Data processing (1)
- Data transmission (telecom) (1)
- Datenverarbeitung (1)
- Datenübertragung (Telekom) (1)
- Datenübertragung (telekom) (1)
- Dauer (1)
- Day (24 hour period) (1)
- Decke [Straße] (1)
- Defect (tech) (1)
- Deformierte Barriere (Anpralltest) (1)
- Demand (econ) (1)
- Demografie (1)
- Demography (1)
- Density (1)
- Design (1)
- Deterioration (1)
- Dichte (1)
- Digital computer (1)
- Digitalrechner (1)
- Dispersion (stat) (1)
- Displacement (1)
- Distribution (gen) (1)
- Driving (1)
- Driving aid (electronic) (1)
- Dtetection (1)
- Durchsichtigkeit (1)
- Economic efficiency (1)
- Ecosystem (1)
- Eichung (1)
- Einbau (1)
- Einfahrt (1)
- Ejection (1)
- Elastizitätsmodul (1)
- Electronics (1)
- Elektronik (1)
- Elektronische Fahrhilfe (1)
- Elektronisches Stabilitätsprogram (1)
- Emergency (1)
- Emergency medical aid (1)
- Empfindlichkeit (1)
- Energie (1)
- Energy (1)
- Enteignung (1)
- Entgleisung (Zug) (1)
- Entrance (1)
- Entschädigung (1)
- Environmental impact analysis (1)
- Environmental protection (1)
- Epilepsie (1)
- Epilepsy (1)
- Ernährung (1)
- Ersatzdroge (1)
- Ethanol (1)
- Evacuation (1)
- Evakuierung (1)
- Evaluation (1)
- Event data recorder (Road vehicle) (1)
- Experimental road (1)
- Expert system (1)
- Expertensystem (1)
- Explosion (1)
- Expressway (1)
- Expropriation (1)
- Face (human) (1)
- Facility (1)
- Fahrbahn (1)
- Fahrer ; Fahrerassistenzsystem (1)
- Fahrerinformationen (1)
- Fahrleistung (1)
- Fahrwerk (1)
- Fahrzeugdach (1)
- Fahrzeugflotte (1)
- Fahrzeugrückhaltesystem (1)
- Fahrzeugteil (Sicherheit) (1)
- Fallstudie (1)
- Fatigue (mech) (1)
- Fear (1)
- Feinstaub (1)
- Fence (1)
- Feuer (1)
- Fleet of vehicles (1)
- Flooding (1)
- Flugsicherung (1)
- Flächennutzungsplan (1)
- Flächentragwerk (1)
- Food (1)
- Force (1)
- Form (1)
- Forschungsbericht (1)
- Foundation (1)
- Frequenz (1)
- Friction (1)
- Fruchtsaft (1)
- Fruit (1)
- Fruit juice (1)
- Fuel tank (1)
- Full depth asphalt pavement (1)
- Furcht (1)
- Führerschein Punktesystem (1)
- Gehirn (1)
- Geografisches Information System (1)
- Geographical information system (1)
- Geometry (shape) (1)
- Geophysic (1)
- Geophysik (1)
- Geradeausverkehr (1)
- Geschwindigkeitsbeschränkung (1)
- Gesicht (1)
- Gesundheit (1)
- Glatteis (1)
- Gravity (1)
- Grooving (1)
- Grunderwerb (1)
- Gründung (1)
- Gussasphalt (1)
- Harmonisierung (1)
- Head (human) (1)
- Health (1)
- Heat (1)
- Height (1)
- Heissmischgut (1)
- Herausschleudern (1)
- Herstellung (1)
- Highway traffic (1)
- Hip (human) (1)
- Hochfester Beton (1)
- Hochleistungsbeton (1)
- Homogeneity (1)
- Homogenität (1)
- Hospitsl (1)
- Hot coated material (1)
- Human machine interface (1)
- Hängebrücke (1)
- Häufigkeit (1)
- Höhe (1)
- Hüfte (1)
- Hüfte (menschl) (1)
- Image analysis (1)
- Image generation (1)
- Image processing (1)
- Immission (1)
- Impact (collision) (1)
- Impact study (environment) (1)
- In situ (1)
- Indemnity (1)
- Inertia reel safety belt (1)
- Information management (1)
- Infotainment System (1)
- Infotainment system (1)
- Intelligentes Transportsystem (1)
- Intelligentes Verkehrssystem (1)
- Interactive model (1)
- Interaktives Modell (1)
- Interface (1)
- Inventar (1)
- Inventory (1)
- Ireland (1)
- Irland (1)
- Italien (1)
- Italy (1)
- Itinerary (1)
- Jahreszeit (1)
- Kabel (1)
- Kalk (1)
- Kleintransporter (1)
- Klimawandel (1)
- Knie (1)
- Knochen (1)
- Kognitive Beeinträchtigung (1)
- Kohlendioxid (1)
- Kontakt Reifen-Straße (1)
- Konzentration (1)
- Kooperatives System (ITS) (1)
- Kopf (menschl) (1)
- Korea (Süd) (1)
- Korrelation [math (1)
- Korrosion (1)
- Kraft (1)
- Kraftfahrzeug (1)
- Kraftstofftank (1)
- Kragarm (1)
- Kreisverkehrsplatz (1)
- Kreuzung (1)
- Kunde (1)
- Körperhaltung (1)
- Körperstellung (1)
- Laboratorium (1)
- Laboratory (1)
- Land acquisition (1)
- Landstraße (1)
- Lap strap (1)
- Lateral (1)
- Lateral collision (1)
- Law enforcement (1)
- Layer (1)
- Laying (1)
- Leaching (1)
- Leichnam (1)
- Leistungsfähigkeit (Allg.) (1)
- Lernen (1)
- Lime (1)
- Links (1)
- Luftreinhaltung (1)
- Länge (1)
- Malaysia (1)
- Manufacture (1)
- Market (1)
- Markt (1)
- Mass spectrometry (1)
- Massenspektrometrie (1)
- Massenunfall (1)
- Materialveraenderung (allg) (1)
- Mathematical Model (1)
- Matrix (1)
- Mean (math) (1)
- Mechanics (1)
- Mechanik (1)
- Mensch Maschine Schnittstelle (1)
- Text (1)
- Messgerät (1)
- Methanol (1)
- Minimum (1)
- Modulus of elasticity (1)
- Moped (1)
- Motorisierungsgrad (1)
- Multiple collision (1)
- Nachfrage (1)
- Nachricht (1)
- Nacht (1)
- Nachtrunk (1)
- Nasse Strasse (1)
- Nasse Straße (1)
- Nerve (1)
- Nerven (1)
- Network (traffic) (1)
- Netzplantechnik (1)
- Neural network (1)
- Neurologie (1)
- Neurology (1)
- Neuronales Netz (1)
- Nigeria (1)
- Night (1)
- Nordamerika (1)
- North America (1)
- Norway (1)
- Norwegen (1)
- Notfall (1)
- Nummer (1)
- Obst (1)
- Offender (1)
- Official approval (1)
- Offset impact test (1)
- On the left (1)
- On the right (1)
- On the spot investigation (1)
- Overturning (1)
- Oxidation (1)
- Oxygen (1)
- Padding (safety) (1)
- Particulate matter (1)
- Partnerschaft (1)
- Partnership (1)
- Passive restraint system (1)
- Pavement Management System (1)
- Peat (1)
- Pelvis (1)
- Perception (1)
- Pfahl (1)
- Pflasterstein (1)
- Pfosten (1)
- Physiologie (1)
- Physiology (1)
- Pile (1)
- Platte (1)
- Point demerit system (1)
- Pole (1)
- Pollutant (1)
- Pollution (1)
- Pollution concentration (1)
- Polyolefin (1)
- Polyvinylhydrocarbon (1)
- Population (1)
- Portable (1)
- Position (1)
- Pregnancy (1)
- Preloading (soil) (1)
- Privat (1)
- Private (1)
- Privatisation (1)
- Privatization (1)
- Prohibition (1)
- Protective helmet (1)
- Prüefverfahren (1)
- Prüfung (1)
- Pssives Sicherheitssystem (1)
- Public participation (1)
- QAccident (1)
- Quality assurance (1)
- Quality management system (1)
- Qualitätsmanagementsystem (1)
- Qualitätssicherung (1)
- Querschnitt (1)
- Radar (1)
- Radfahren (1)
- Rail bound transport (1)
- Rain (1)
- Rechts (1)
- Rechtsübertreter (1)
- Recidicist (1)
- Reconstruction [accid] (1)
- Reduction (decrease) (1)
- Regen (1)
- Regierung (Staat) (1)
- Regional planning (1)
- Reibung (1)
- Reifen (1)
- Reiseweg (1)
- Republic of Corea (1)
- Research projekt (1)
- Research report (1)
- Residential area (1)
- Resuscitation (1)
- Reversing (veh) (1)
- Rib (1)
- Richtlinie (1)
- Rillenherstellung (1)
- Road (1)
- Road pricing (1)
- Road transport (1)
- Roadside (1)
- Robot (1)
- Roboter (1)
- Roll over (veh) (1)
- Roof (veh) (1)
- Rotation (1)
- Roundabout (1)
- Rsk (1)
- Run oo the road (accid) (1)
- Rupture (1)
- Rural road (1)
- Röntgenstrahlung (1)
- Rücken (1)
- Rückfalltäter (1)
- Rückwärtsfahren (1)
- Safety harness (1)
- Safety system (1)
- Saftey (1)
- Sauerstoff (1)
- Schadstoff (1)
- Schicht (1)
- Schienentransport (1)
- Schnittstelle (1)
- School (1)
- Schule (1)
- Schwangerschaft (1)
- Schweregrad (UNfall (1)
- Schwerkraft (1)
- Schwingung (1)
- Schätzung (1)
- Sealing compound (1)
- Season (1)
- Seat (1)
- Seat belt (1)
- Seat harness (1)
- Sensitivity (1)
- Service life (1)
- Sett (1)
- Settlement (1)
- Setzung (1)
- Severity (accid, injuy) (1)
- Shell (struct) (1)
- Sicherheitspolsterung (1)
- Significance (1)
- Signifikanz (1)
- Slab (1)
- Social factors (1)
- Soziale Faktoren (1)
- Spaltzugfestigkeitsversuch (1)
- Span (1)
- Spannung (mater) (1)
- Spannweite (1)
- Speed limit (1)
- Speed) (1)
- Spinal calum (1)
- Splitting tensile test (1)
- Sprödigkeit (1)
- Sri Lanka (1)
- Stadtentwicklung (1)
- Stahl (1)
- Stand der Technik (Bericht) (1)
- Standardabweichung (1)
- State of the art report (1)
- Statistik (math) (1)
- Steel (1)
- Stickoxide (1)
- Stochastic process (1)
- Stochastischer Prozess (1)
- Stopping distance (1)
- Straight ahead (traffic) (1)
- Strasse (1)
- Straßenbenutzungsgebühr (1)
- Straßenseitenfläche (1)
- Straßentransport (1)
- Stress (1)
- Stress (in material) (1)
- Subsequent drink (1)
- Subsoil (1)
- Substitution drugs (1)
- Sulfat (1)
- Sulphate (1)
- Suspension bridge (1)
- Süchtigkeit (1)
- Tag (24 Stunden) (1)
- Tal (1)
- Tax (1)
- Technische Vorschriften (1)
- Technische Vorschriften (Kraftfahrzeug) (1)
- Tension (1)
- Test procedure (1)
- Thailand (1)
- Tier (1)
- Ton (Gestein) (1)
- Torf (1)
- Tower (Bridge) (1)
- Tower (bridge) (1)
- Traffic infrastructure (1)
- Traffic restraint (1)
- Tragbar (1)
- Transfer (phys) (1)
- Transparent (1)
- Transport operator (1)
- Transportunternehmen (1)
- Traveler (1)
- Two dimensional (1)
- Tyre (1)
- Tätigkeitsbericht (1)
- Ultraviolet (1)
- Ultraviolett (1)
- Umgehungsstraße (1)
- Umweltschutz (1)
- Underride prevention (1)
- Unfalldaten (1)
- Unfallfolgephase (1)
- Unfallrate (1)
- Unfallrekonsruktion (1)
- Unfallspurensicherung (1)
- Unfallverhütug (1)
- Ungeschützter Verkehrsteilnehmer (1)
- Unterfahrschutz (1)
- Untergrund (1)
- Untersuchung am Umfallort (1)
- Urban development (1)
- Urin (1)
- Urine (1)
- Usa (1)
- Valley (1)
- Variance analysis (1)
- Varianzanalyse (1)
- Vehicle mile (1)
- Vehicle ownership (1)
- Vehicle restraint system (1)
- Vehicle safety (1)
- Vehicle safety device (1)
- Veletzung) (1)
- Verankerung (1)
- Verbot (1)
- Vereinigtes Königreichl (1)
- Verfahen (1)
- Verfahren ; Verkehrsinfrastruktur (1)
- Verkehrsbeschränkung (1)
- Verkehrsnetz (1)
- Vermeidung (1)
- Verständnis (1)
- Verstärkung (Brücke) (1)
- Versuchsstrecke (1)
- Verteilung (allg) (1)
- Vertragspartner (1)
- Vibration (1)
- Visualisation (1)
- Visualisierung (1)
- Vorbelastung (Boden) (1)
- Vulnerable road user (1)
- Wahrnehmung (1)
- Warning (1)
- Warnung (1)
- Weather (1)
- Window (veh) (1)
- Windscreen (veh) (1)
- Winter maintenance (1)
- Winterdienst (1)
- Wirkungsanalyse (1)
- Wirtschaftlichkeit (1)
- Witterung (1)
- Wohngebiet (1)
- Women (1)
- Workplace (1)
- Wärme (1)
- Zahl (1)
- Zug (mech) (1)
- Zusammendrückung (1)
- Zusammenstoss (1)
- Zweidimensional (1)
- accident (1)
- aktives Sicherheitssystem (1)
- analyses (math) (1)
- ar (1)
- efficiency (1)
- fatality (1)
- finite element method (1)
- head (1)
- road) (1)
- simulation (1)
- stat] (1)
- tödlicher Unfall (1)
- Ästhetik (1)
- Öffentlich Private Partnerschaft (1)
- Öffentliche Beteiligung (1)
- Ökosystem (1)
- Überdeckung (1)
- Überrollung (1)
- Überschwemmung (1)
- Übertragung (phys) (1)
Institut
- Sonstige (404) (entfernen)
For the determination of the road surface roughness common methods have been established, like Skid Resistance Tester (SRT) or the Sideway-force Coefficient Routine Investigation Machine (SCRIM). Both methods are used to measure a comparable and reliable maximum friction potential value and to assess the quality of the road surface. However, the comparison of the measurements under real conditions and the results of measurements with SRT and SCRIM showed only minor correlations. The paper shows the comparison between these standardised methods and real vehicle braking tests and discusses the results.
The objectives of this paper are the analysis of the accident risk of drivers brain pathologies (Mild Cognitive Impairment, Alzheimer- disease, and Parkinson- disease), and the investigation of the impact of driver distraction on the accident risk of patients with brain pathologies, through a driving simulator experiment. The three groups of patients are compared to a healthy group of similar demographics, with no brain pathology. In particular, 125 drivers of more than 55 years old (34 "controls"" and 91 "patients") went through a large driving simulator experimental process, in which incidents were scheduled to occur. They drove in rural and urban areas, in low and high traffic volumes and in three distraction conditions (undistracted driving, conversation with a passenger and conversation through a mobile phone). The statistical analyses indicated several interesting findings; brain pathologies affect significantly accident risk and distraction affects more the groups of patients than the control one.
Motorcycle crashes in Austria: Analysis of causes and contributing factors based on in-depth data
(2017)
From CEDATU, the in-depth accident database run by the Vehicle Safety Institute at Graz University of Technology, a representative sample of 101 crashes involving at least one motorcycle was selected. The analysis focused on causes for crashes as well as on contributing factors, but also included parameters of road, riders and vehicles. Own riding speed and "unexpectable action by another road user" were the most frequent causes for accidents. Inappropriate safety distance or delayed reaction were frequent, both as causation factors and as contributing factors. Infrastructure issues never cause an accident, but they are very frequent as contributing factors; road geometry and road guidance are by far most frequent among these. This paper also discusses accidents by type and other parameters (e.g. injury severity by body region, collision speed, age and others), and compares accident causes to previous studies as well as the police reported accident statistics.
The Decision Support System (DSS) is one of the key objectives of the European co-funded research project SafetyCube in order to better support evidence-based policy making. Results will be assembled in the form of a DSS that will present for each suggested road safety measure: details of risk factor tackled, measure, best estimate of casualty reduction effectiveness, cost-benefit evaluation and analytic background. The development of the DSS presents a great potential to further support decision making at local, regional, national and international level, aiming to fill in the current gap of comparable measures effectiveness evaluation. In order to provide policy-makers and industry with comprehensive and well-structured information about measures, it is essential that a systems approach is used to ensure the links between risk factors and all relevant safety measures are made fully visible. The DSS is intended to become a major source of information for industry, policy-makers and the wider road safety community.
In most of developed countries, the progress made in passive safety during the last three decades allowed to drastically reduce the number of killed and severely injured especially for occupants of passenger cars. This reduction is mainly observed for frontal impacts for which the AIS3+ injuries has been reduced about 52% for drivers and 38% for front passengers. The stiffening of the cars' structure coupled with the generalization of airbags and the improvement of the seatbelt restraint (load limiter, pretension, etc.) allowed to protect vital body regions such as head, neck and thorax. However, the abdomen did not take advantage with so much success of this progress. The objective of this study is to draw up an inventory on the abdominal injuries of the belted car occupants involved in frontal impact, to present adapted counter-measures and to assess their potential effectiveness. In the first part the stakes corresponding to the abdominal injuries will be defined according to types of impact, seat location, occupants' age and type of injured organs. Then, we shall focus on the abdominal injury risk curves for adults involved in frontal impact and on the comparisons of the average risks according to the seat location. In the second part we will list counter-measures and we shall calculate their effectiveness. The method of case control will be used in order to estimate odds ratio, comparing two samples, given by occupants having or not having the studied safety system. For this study, two type of data sources are used: national road injured accident census and retrospective in-depth accident data collection. Abdominal injuries are mainly observed in frontal impact (52%). Fatal or severe abdominal occupant- injuries are observed at least in 27% of cases, ranking this body region as the most injured just after the thorax (51%). In spite of a twice lower occupation rate in the back seats compared to the front seats, the number of persons sustaining abdominal injuries at the rear place is higher than in the front place. In recent cars, the risk of having a serious or fatal abdominal injury in a frontal impact is 1.6% for the driver, 3.6% for the front passenger and 6.3% for the rear occupants. The most frequently hurt organs are the small intestine (17%), the spleen (16%) and the liver (13%). The most common countermeasures have a good efficiency in the reduction of the abdominal injuries for the adults: the stiffness of the structure of the seats allows decreasing the abdominal injury risk from 54% (driver) to 60% (front occupant), the seatbelt pretensioners decrease also this risk from 90% (driver) to 83% (front passenger).
Driver distraction
(2017)
This report for the Institute of Advanced Motorists (IAM) summarises recent research and knowledge from scientific studies about distracted driving. The report defines what it means to be "distracted" when driving, discusses the impact of distraction on driver behaviour and safety, and what can be done to reduce distracted driving. The focus of distraction discussed here relates to how drivers engage with technology when driving. The report begins with a background to driver distraction, followed by discussion about what is actually meant by driver distraction. It is then considered why humans cannot successfully do two things at the same time, particularly within the context of driving. The subsequent section summarises the scientific research findings to date with regard to driver distraction and technology, and how this affects different types of road user. Recommendations for how driver distraction can be mitigated in the real world and a summary conclude the report. Responses to common questions raised by drivers are presented in Appendix A.
This work describes the results of the experimental activity, illustrating the driving behavior observed in different conditions, relating them to the different methods of ADAS intervention and comparing the driver behavior without ADAS. In the present study, driver behavior was studied in road accidents involving elderly pedestrians, with different ADAS HMIs, as a base to develop a driver model in near missing pedestrian accidents. A literature research was conducted with the aim of finding out the main influencing factors, including environment, boundary conditions, configuration of impact, pedestrian and driver information, when pedestrian fatalities occur and an analysis of frequent road accidents was conducted to get more detailed information about the driver- behavior. In order to obtain more detailed information about pedestrian accidents, real road accidents were reconstructed with multibody simulations on PC-Crash and, by the comparison between literature findings and reconstructions, a generic accident scenario was defined. The generic accident scenario was implemented on the full scale dynamic driving simulator in use at the Laboratory for Safety and Traffic Accident Analysis (LaSIS, University of Florence, Italy) in order to analyse the driving behaviors of volunteers, also considering the influence of ADAS devices. Forty-five young volunteers were enrolled for this study, resulting in forty valid tests on different testing scenarios. Two different scenarios consisted in driving with or without ADAS in the vehicle. Different kinds of ADAS, acoustic and optical, with different time of intervention were tested in order to study the different reactions of the driver. The tests showed some interesting differences between driver's behavior when approaching the critical situation. Drivers with ADAS reacted earlier, but more slowly, depending also on the type of alarm, and often with double reaction when braking. In fact, the results of the activity showed that with ADAS intervention the time to collision (TTC) increases, but the reaction time and braking modality change: a) there is a sort of "latency" time between the accelerator pedal release and the brake pressure; b) the brake pressure is initially less intense. So the driver only partially takes advance from the TTC increase. These differences were valued not only qualitatively, but quantitatively as well. This work revealed to be useful to improve the knowledge of drivers" behavior, in order to realize a driver model that can be implemented to help attaining and assessing higher levels of automation through new technology.
From an automotive safety occupant protection standpoint, effective occupant restraint requires a system capable of providing non-injurious occupant ride down of anticipated crash forces. This is not only the case for frontal collisions, where occupant restraint is provided primarily by seatbelts and airbags, but is also critical for other crash modes such as side impacts, rear impacts, rollovers, as well as multiple impact events. In the rear impact crash mode, occupant restraint is provided primarily by the seatbacks and to some extent the seatbelts. Foundationally, therefore, what becomes fundamental to the seatback's role in rear occupant protection is its ability to contain the occupant within the seat, preventing occupant ramping, as well as preventing the seat's, and/or its occupant's, dangerous intrusion into the rear occupant's survival space where contact with rear compartment components and/ or rear seated occupants can present a significant injury risk. An analysis is presented of a series of rear impact sled testing conducted by the authors that evaluates the timing, position and extent of the front seatback's reward displacement toward and into the rear occupant compartment as well as consideration of the front seat occupant' ramping potential and its injury potential relative to the rear compartment. Additionally, three other series of testing are presented which assess various seat designs occupant retention capabilities. Lastly, a matched-pair comparison test series is presented which evaluates occupant motion in rear impact with and without use of a typical vehicle body mounted 3-point seatbelt. Discussion of restraint system performance observed in all the testing is included along with ATD biofidelity and thigh-gap considerations. The data collected and presented includes accelerometer instrumentation and high speed video analysis.
Twenty-eight percent of traffic accidents in Japan are rear-end collisions, and of these, 13% are multiple collisions (three or more vehicles and/or roadside objects). A post-crash braking system enables the driver to stop the vehicle in a short distance after a rear-end collision to prevent secondary collisions. In this study, the effectiveness of a post-crash braking system was examined using a drive recorder database. In 64% of rear-end collisions, the driver's braking was interrupted after the collision. The stopping distance was estimated with time data from the drive recorder. We predict that the brake assist would be effective in preventing secondary collisions in 21% of cases.
Whiplash injuries are characterized by the high variability of its symptoms and by the subjectivity of its diagnosis, which sometimes leads to frauds perpetrated by victims of rear-end impacts. It is estimated that whiplash injuries cost annually about 10.000 million Euros in Europe. Therefore, the aim of this study was to investigate the influence of the dynamics of the accident in which the victim was involved in the probability of development of whiplash associated injuries. In the presented methodology, first an accident reconstruction is performed where the dynamics of the accident is determined. This is carried out using the software PC-Crash, police and insurance companies' data. Then biomechanical injuries criteria related with whiplash injuries are evaluated. For the evaluation of the probability of having whiplash injuries, the Neck Injury Criterion (NIC) of the victim and the mean acceleration of the vehicle were evaluated. Then, with medical reports, the results of the accident reconstruction are correlated with the reported injuries. Some examples are presented. The results obtained indicate that the study of the dynamics of the road accidents in which the victims were involved could be used as an auxiliary of the prognosis of whiplash injuries and is important for a precise diagnosis of this type of injuries.
This study investigates the protection offered by passive head-restraints with different stiffness and energy dissipation properties. For this purpose, computational multi-body models of a generic car seat and a biofidelic 50thpercentile male human for rear impact are used to study different seat designs and passive head-restraints. The validated seat-occupant model is also used in the design of two different car-seat models which are shown to effectively mitigate whiplash by utilising a crash-energy distribution technique. Five different passive head-restraints with varying stiffness (low-medium-high) and energy dissipation percentages (low-high) are successively attached to four different car-seat models. The simulation results indicate that the protection offered by head restraints is strongly dependent on the seat design. It has also been shown that the stiffness of the passive head-restraint has much more influence on whiplash-risk in comparison to its energy dissipation capacity.
Millions of kilometers are driven and recorded by car manufacturers and researchers every year to gather information about realistic traffic situations. The focus of these studies is often the recording of critical situations to create test scenarios for the development of new systems before introducing them into the market. This paper shows a novel Analysis and Investigation Method for All Traffic Scenarios (AIMATS) based on real traffic scenes. It also shows how to get detailed information about speeds, trajectories and behavior of all participants without driving thousands of kilometers at the example of conflict situations with animals. Basis of the AIMATS is the identification of the most relevant locations as "Points of Interest" (POI), the recording of the critical situations and their "base lines" at these POI. This paper presents a new method to identify critical scenarios involving both vehicles and animals as well as preliminary results of a study done in Saxony using this new method.
Test and assessment procedures for passive pedestrian protection based on developments by the European Enhanced Vehicle-safety Committee (EEVC) have been introduced in world-wide regulations and consumer test programmes, with considerable harmonization between these programmes. Nevertheless, latest accident investigations reveal a stagnation of pedestrian fatality numbers on European roads running the risk of not meeting the European Union- goal of halving the number of road fatalities by the year 2020. The branch of external road user safety within the EC-funded research project SENIORS under the HORIZON 2020 framework programme focuses on investigating the benefit of modifications to pedestrian test and assessment procedures and their impactors for vulnerable road users with focus on the elderly. Injury patterns of pedestrians and cyclists derived from the German In-Depth Accident Study (GIDAS) show a trend of AIS 2+ and AIS 3+ injuries getting more relevant for the thorax region in crashes with newer cars (Wisch et al., 2017), while maintaining the relevance for head and lower extremities. Several crash databases from Europe such as GIDAS and the Swedish Traffic Accident Data Acquisition (STRADA) also show that head, thorax and lower extremities are the key affected body regions not only for the average population but in particular for the elderly. Therefore, the SENIORS project is focusing on an improvement of currently available impactors and procedures in terms of biofidelity and injury assessment ability towards a better protection of the affected body regions, incorporating previous results from FP 6 project APROSYS and subsequent studies carried out by BASt. The paper describes the overall methodology to develop revised FE impactor models. Matched human body model and impactor simulations against generic test rigs provide transfer functions that will be used for the derivation of impactor criteria from human injury risk functions for the affected body regions. In a later step, the refined impactors will be validated by simulations against actual vehicle front-ends. Prototyping and adaptation of test and assessment procedures as well as an impact assessment will conclude the work of the project at the final stage. The work will contribute to an improved protection of vulnerable road users focusing on the elderly. The use of advanced human body models to develop applicable assessment criteria for the revised impactors is intended to cope with the paucity of actual biomechanical data focusing on elderly pedestrians. In order to achieve optimized results in the future, the improved test methods need to be implemented within an integrated approach, combining active with passive safety measures. In order to address the developments in road accidents and injury patterns of vulnerable road users, established test and assessment procedures need to be continuously verified and, where needed, to be revised. The demographic change as well as changes in the vehicle fleet, leading to a variation of accident scenarios, injury frequencies and injury patterns of vulnerable road users are addressed by the work provided by the SENIORS project, introducing updated impactors for pedestrian test and assessment procedures.
Supported by field accident data and monitoring results of European Regulation (EC) No. 78/2009, recent plans of the European Commission regarding a way forward to improve passive safety of vulnerable road users include, amongst other things, an extension of the head test area. The inclusion of passive cyclist safety is also being considered by Euro NCAP. Although passenger car to cyclist collisions are often severe and have a significant share within the accident statistics, cyclists are neither considered sufficiently in the legislative nor in the consumer ratings tests. Therefore, a test procedure to assess the protection potential of vehicle fronts in a collision with cyclists has been developed within a current research project. For this purpose, the existing pedestrian head impact test procedures were modified in order to include boundary conditions relevant for cyclists as the second big group of vulnerable road users. Based on an in-depth analysis of passenger car to cyclist accidents in Germany the three most representative accident constellations have been initially defined. The development of the test procedure itself was based on corresponding simulations with representative vehicle and bicycle models. In addition to different cyclist heights, reaching from a 6-year-old child to a 95%-male, also four pedal positions were considered. By reconstruction of a real accident the defined simulation parameters could be validated in advance. The conducted accident kinematics analysis shows for a large portion of the constellations an increased head impact area, which can reach beyond the roof leading edge, as well as high average values for head impact velocity and angle. Based on the simulation data obtained for the different vehicle models, cyclist-specific test parameters for impactor tests have been derived, which have been further examined in the course of head and leg impact tests. In order to study the cyclist accident kinematics under real test conditions, different full scale tests with a Polar-II dummy positioned on a bicycle have been conducted. Overall, the tests showed a good correlation with the simulations and support the defined boundary test conditions. Typical accident scenarios and simulations reveal higher head impact locations, angles and velocities. An extended head impact area with modified test parameters will contribute to an improved protection of vulnerable road users including cyclists. However, due to significantly differing impact kinematics and postures between the lower extremities of pedestrians and cyclists, these injuries cannot be addressed by the means of current test tools such as the flexible pedestrian legform impactor FlexPLI. Based on the findings obtained within the project as well as the existing pedestrian protection requirements a cyclist protection test procedure for use in legislation and consumer test programmes has been developed, whose requirements have been transferred into a corresponding test specification. This specification provides common head test boundary conditions for pedestrians and cyclists, whereby the existing requirements are modified and two parallel test procedures are avoided.
Research to inform policy is often challenged with how to genuinely use and implement research findings in decision-making and policy-planning. To begin with, the dialogue between researchers and decision-makers is essential to ensure profound understanding and legitimate interpretations of the results. Furthermore, the step to drawing practical conclusions and processing them into actions can only succeed if research findings are diffused to decision-making levels with influence on the matter, and mechanisms to knowledge transfer in the presence of a stable, favourable policy environment exist. Research investments into the topic of electromobility in Europe are substantial, and subtopics aiming to inform national policy-makers address a complex set of aspects from environmental and societal to technological and economic. This paper has a two-fold objective, the first of which is to present the results of scenarios to explore electromobility deployment in Finland, Germany and the European Union. The second is to discuss the challenges and solutions to bridge the gap from research findings towards decision-making and policy-planning, using the authors' electromobility scenario work as an example. The electromobility scenarios were built using the VECTOR21 model (Mock, 2010), and the rationale was to simulate vehicle sales and markets under different policy settings and calculate the most economical solution to fulfill regulation on COâ‚‚ emissions as set by the European Commission (2009). The model allows calculating the market diffusion of alternative powertrain technologies to the European market until 2030, taking into account different taxation schemes, incentives and other country-specific characteristics. The authors also present the cost-benefit-analysis of the modelling results to assess the different scenarios and to show variation between regions regarding profitability of alternative technological or political support and interventions. To proceed from research findings towards decision-making and policy-planning, the authors made observations relating to transfer of research knowledge and interpretation of their electromobility scenario results in national policy contexts. An evaluation of how the function of research to inform policy in this case succeeded is provided. In addition, the influence of expert opinions on the political decision-making process will be discussed through experiences from an expert questionnaire conducted to survey the importance of costs, time requirement, acceptance and other criteria of promotion measures of electromobility.
Im Erd- und Straßenbau ist es in den letzten Jahren bei bindemittelbehandelten sulfathaltigen Böden wiederholt zu teilweise erheblichen Schäden durch Quellhebungen gekommen, die auf eine Mineralreaktion im Boden zurückzuführen sind. Werden Böden mit natürlichem Sulfatgehalt zu bautechnischen Zwecken mit calciumbasierten Bindemitteln behandelt, so kann das Bindemittel unter bestimmten Randbedingungen mit den im Gips enthaltenen Sulfationen zum Mineral Ettringit reagieren. Infolge der mit dieser Mineralneubildung verbundenen Volumenvergrößerung kann es zu erheblichen Hebungsschäden kommen. Die für die Reaktion des Sulfattreibens im Boden maßgebenden Einflussfaktoren sind zwar grundsätzlich bekannt, quantitative Prüfmethoden und standardisierte Strategien zur Gefahrenabwehr lagen bis dato allerdings noch nicht vor. Das Ziel des Forschungsvorhabens, über das in diesem Beitrag berichtet wird, war die Entwicklung eines praxistauglichen Prüfverfahrens als Grundlage für eine hieraus abzuleitende Prüfvorschrift. Hierfür wurden an Proben aus verschiedenen Boden-Bindemittelgemischen mit definierten Sulfatgehalten Quellhebungsversuche geplant, durchgeführt und ausgewertet. Im Ergebnis wurde ein annähernd linearer Zusammenhangzwischen dem Sulfatgehalt im Boden und den eingetretenen Quellhebungen festgestellt. Die Ergebnisse zeigen ferner, dass eine Behandlung sulfathaltiger Böden mit Weißfeinkalk mit größeren Quellhebungen verbunden ist als eine Behandlung mit Zement.
Die Europäischen Normen für Erdarbeiten werden im CEN/TC 396 "Earthworks" erarbeitet. Das Sekretariat des CEN/TC 396 wird vom französischen Normungsinstitut AFNOR gehalten. Die Normungsarbeit wird im DIN-Ausschuss NA 005-05-22 AA "Erdarbeiten (SpA zu CEN/TC 396), Gemeinschaftsausschuss mit FGSV GA 5.01" gespiegelt. Vertreter des Spiegelausschusses arbeiten in den verschiedenen Arbeitsgruppen (Working Groups (WG)) des CEN/TC 396 mit. In den Jahren 2009 und 2010 wurden die Gremien konstituiert und mit der Normungsarbeit begonnen, zunächst überwiegend durch die Zusammenstellung der vorhandenen Regelungen in den Mitgliedsstaaten (siehe auch Beitrag Vogel/Leister/Heyer zur Erd- und Grundbautagung 2013). Im November 2014 wurden vom CEN/TC 396 die Arbeitsaufträge ("work items") offiziell gestartet.
Fire incidents are among the most relevant for people in a tunnel. Therefore, it is important to be sufficiently prepared for such events. A large scale fire test is to be used to help evaluate the initial burning duration and the time it takes for the fire to spread to other vehicles in the tunnel, and in particular how long it takes for a truck carrying wooden pallets to catch fire, taking into consideration the extremely high temperatures. The goal, therefore, is to determine the time it takes for a fire to spread to other vehicles in the tunnel. In the large scale fire test, an accident in a tunnel with one-way traffic is simulated between a truck loaded with approximately 3.7 t of wooden Europol pallets and a passenger car. Directly behind each of the vehicles involved in the accident there is another car which stops at a distance of 1.0 m. Approximately 300 litres of burning diesel are discharged from the truck's fuel tank, which is simulated by using approximately 400 litres of isopropanol. A 10 m-² burning pool forms underneath the truck. Other objectives of the large scale fire test are the validation of the CFD models and the evaluation of the progression of the thermal release ratios estimated for the simulation. The thermal release ratios generated in the test are determined and evaluated using various models.
Bewertung der strukturellen Substanz für die systematische Erhaltungsplanung von Betonfahrbahndecken
(2016)
"Mobilität ist zentrale Voraussetzung für wirtschaftliches Wachstum, Beschäftigung und Teilhabe des Einzelnen am gesellschaftlichen Leben." Dieser Leitsatz des BMVI setzt eine intakte und funktionierende Infrastruktur voraus. Im Kontext mit dem Investitionshochlauf in den nächsten Jahren ist für das Bundesfernstraßennetz insbesondere ein netzbezogenes systematisches Vorgehen im Rahmen der Baulichen Erhaltung von Relevanz. Bei der Planung von Erneuerungsmaßnahmen ist dabei die Kenntnis über den Zustand der strukturellen Substanz und deren langfristige Entwicklung von zentraler Bedeutung. Nachfolgend wird ein Verfahren vorgestellt, das die mechanisch und statistisch abgesicherte Bewertung und Prognose der strukturellen Substanz von Betonfahrbahndecken ermöglicht. Zudem werden die Anwendung und das Vorgehen anhand eines Praxisbeispiels aufgezeigt.
Die Europäischen Normen für Erdarbeiten werden im CEN/TC 396 "Earthworks" erarbeitet. Das Sekretariat des CEN/TC 396 wird vom französischen Normungsinstitut AFNOR gehalten. Die Normungsarbeit wird im DIN-Ausschuss NA 005-05-22 AA "Erdarbeiten (SpA zu CEN/TC 396), Gemeinschaftsausschuss mit FGSV GA 5.01" gespiegelt. Vertreter des Spiegelausschussesarbeiten in den verschiedenen Arbeitsgruppen (working groups (WG)) des CEN/TC 396 mit. In den Jahren 2009 und 2010 wurden die Gremien konstituiert und mit der Normungsarbeit begonnen, zunächst überwiegend durch die Zusammenstellung der vorhandenen Regelungen in den Mitgliedsstaaten (siehe auch Beitrag Vogel/Leister/Heyer zur Erd- und Grundbautagung 2013). Im November 2014 wurden vom CEN/TC 396 die Arbeitsaufträge("work items") offiziell gestartet.
In line with the new definition introduced by the European Commission (EC), the number of seriously injured road casualties in Germany for 2014 is assessed in this study. The number of MAIS3+ casualties is estimated by two different methodological approaches. The first approach is based on data from the German Inâ€Depth Accident Study (GIDAS), which is closely related to the German Road Traffic Accident Statistics. The second approach is based on data from the German TraumaRegister DGU-® (TRâ€DGU), which includes many more hospitals but not all MAIS3+ injuries.
HORN stellt in ihrem Eingangsreferat den "Neuen Bundesverkehrswegeplan und die SUP in der Verkehrswegeplanung" vor. Das zentrale Element des in der Regel auf 10 bis 15 Jahre angelegten Plans ist die aus europäischen Vorgaben abgeleitete Öffentlichkeitsbeteiligung. Diese erfordert bei der Erstellung des Bundesverkehrswegeplans einen kontinuierlichen Kommunikationsprozess. Zugleich betonte HORN die starke Unterfinanzierung des aktuellen Plans. Der Erhaltung der vorhandenen Verkehrsinfrastruktur komme in den Bereichen Straße, Schiene und Wasser der Vorrang vor Neubauten zu. FEHLING plädiert in seinem Beitrag "Die Straße im Kontext des öffentlichen Personennahverkehrs" für eine nahverkehrsfreundliche Planung und Gestaltung des Straßenraums. Die Planungen verschiedener Verkehrsträger und Planungsebenen müssten aufeinander aber auch mit straßenverkehrsrechtlichen Anordnungen abgestimmt werden. Die entsprechende Koordination sei allerdings verbesserungsbedürftig. Namentlich die Vernetzung der Nahverkehrsplanung mit anderen Planungsebenen müsse ausgebaut werden. KUGELE berichtet in seinem Beitrag "Selbstfinanzierte Straßen" für eine längerfristige Verlässlichkeit der Verkehrsfinanzierung. Gegenwärtig fließe nur etwa die Hälfte der Abgaben aus dem Verkehr dem Gesamtverkehrssystem auch wieder zu. Diese Mittel müssten gesteigert und längerfristig für den Verkehr verfügbar gemacht werden, etwa durch längerfristige Leistungs- und Finanzierungsvereinbarungen oder durch Sondervermögen. Der abschließende Beitrag "Das neue Vergaberecht" von SIEGEL behandelt drei neue EU-Vergaberichtlinien, die am 17.04.2014 in Kraft getreten und nun binnen zweier Jahre umzusetzen sind. Nach dem neuen Recht können künftig ökologische und soziale Kriterien verstärkt eine Rolle bei der Vergabe von öffentlichen Aufträgen spielen. Diese neuen Richtlinien vergrößern indes die Nachweispflichten und den bürokratischen Aufwand. Neben das Kriterium des "wirtschaftlich günstigsten Angebots" zählt zudem nunmehr auch das beste Preis-Leistungs-Verhältnis.
Automated driving will provide many kinds of benefits - some direct and some indirect. The benefits originate at the individual level, from changes in the behaviour of drivers and travellers with regard to driving and mobility, ending up with benefits at the social level via changes in the whole transport system and society, where many of the current planning and operations paradigms are likely to be transformed by automated driving. There may also be disbenefits, particularly at a social level, for example in intensity of travel which could result in additional congestion and increased use of natural resources. There may also be unintended consequences. For example, we do not know the impacts on public transport: driverless vehicles could provide a means to a lower cost service provision, but the availability of automated cars could lead to more car travel at the expense of collective transport.
Risk-based approach for the protection of land transport infrastructure against extreme rainfall
(2016)
The aim of the research project "Risk based approach for the protection of transport infrastructure against extreme rainfall RAINEX" is the development of a practical methodology for the identification and assessment of both vulnerable as well as critical transport infrastructures towards extreme rainfall events consequences. The developed methodology is based on expert knowledge and includes qualitative and semi-quantitative analyses regarding the assessment of the vulnerability and criticality of relevant transport infrastructures. The process chain from the spatial rainfall to the concentrated runoff in the river channel was shown to assess the local hazard resulting in the local risk. The main result of the project is a practice-oriented and applicable methodology and a comprehensive and well-developed security handbook.
This paper deals with the determination of test criteria for the durability assessment of polyvinyl chloride (PVC)-based geosynthetic barriers (GBR-P) products in tunnel sealing systems. In the project different products for road tunnel application are investigated by systematic long time storage in hot water using a new test procedure based on SIA V 280 standard (test no. 13) and EN 14415. The objective of this research project is to derive suitable exposure conditions and criteria for a practical testing procedure with regard to service lifetimes of up to 100 years. For that test temperature and time as well as the best suitable test medium have been investigated in a structured way. To verify the results of the new test procedure the material properties of GBR-P samples removed from older road tunnels are investigated. Based on the presented results of the still on-going research program some preliminary conclusions regarding the updating of the German regulations for road tunnel sealing systems (ZTV-ING part 5 section 5 and TL/TP KDB) are given.
Tunnel in Spritzbetonbauweise werden in der Regel mit einem Abdichtungssystem aus Kunststoffdichtungsbahnen (KDB) gegen das anstehende Bergwasser abgedichtet. Die Tunnelabdichtungen aus KDB müssen dabei über die gesamte Nutzungsdauer des Bauwerks von in der Regel 130 Jahren zuverlässig ihre Funktion erfüllen. Ein einfacher Austausch der KDB oder der Einbau einer gleichwertigen Alternative ist in der Regel nicht, oder nur mit erheblichem Aufwand möglich. Bislang existieren national und international keine abgesicherten Prüfkriterien, die eine Bestimmung der Langzeitbeständigkeit von KDB über die geforderte Nutzungsdauer von mindestens 100 Jahren ermöglichen. Im vorliegenden Beitrag werden Untersuchungsergebnisse eines BASt Forschungsprojektes präsentiert, in dem Prüfkriterien für die Abschätzung der Langzeitbeständigkeit von KDB aus PVC-P hergeleitet werden. In diesem Projekt werden verschiedene marktübliche KDB für die Tunnelabdichtung mit einem beschleunigten Prüfverfahren "Lagerung in heißem Wasser" systematisch auf ihr Alterungsverhalten hin untersucht. Das hierfür verwendete Immersionsprüfverfahren wurde neu entwickelt und basiert auf der SIA V 280 (Prüfung Nr. 13) und DIN EN 14415. Ziel der Untersuchungen ist es, die erforderlichen Prüfkriterien zu definieren, die für eine praxisgerechte Abschätzung der Nutzungsdauer von mindestens 100 Jahren erforderlich sind. Hierfür werden beispielsweise die Einlagerungsdauer, die Einlagerungstemperatur und das Prüfmedium strukturiert untersucht. Zum Vergleich der Prüfergebnisse aus dem Immersionsprüfverfahren werden Untersuchungen an ausgebauten KDB Proben aus 2 älteren Straßentunneln herangezogen. Die Ergebnisse des Forschungsvorhabens sollen in die Fortschreibung des nationalen Regelwerks für den Straßentunnelbau (TL/TP KDB) einfließen.
Injury severity of e.g. pedestrians or bikers after crashes with cars that are reversing is almost unknown. However, crash victims of these injuries can frequently be seen in emergency departments and account for a large amount of patients every year. The objective of this study is to analyze injury severity of patients that were crashed into by reversing cars. The Hannover Medical School local accident research unit prospectively documented 43,000 road traffic accidents including 234 crashes involving reversing cars. Injury severity including the abbreviated injury scale (AIS) and the maximum abbreviated injury scale (MAIS) was analyzed as well as the location of the accident. As a result 234 accidents were included into this study. Pedestrians were injured in 141 crashes followed by 70 accidents involving bikers. The mean age of all crash victims was 57 -± 23 years. Most injuries took place on straight stretches (n = 81) as well as parking areas (n = 59), entries (n = 36) or crossroads (n = 24). The AIS of the lower extremities was highest followed by the upper extremities. The AIS of the neck was lowest. The mean MAIS was 1.3 -± 0.6. The paper concludes that the lower extremities show the highest risk to become injured during accidents with reversing cars. However, the risk of severe injuries is likely low.
Detailed anthropometric data of pregnant women have been collected and used in the development of a computational model of the pregnant occupant model "Expecting". The model is complete with a finite element uterus and multi-body fetus, which is a novel feature in the models of this kind. The computational pregnant occupant model has been validated and used to simulate a range of impacts. The strains developed in the utero-placental interface are used as the main criteria for fetus safety. Stress distributions due to inertial loading of the fetus on the utero-placental interface play a role on the strain levels. Inclusion of fetus model is shown to significantly affect the strain levels in the utero-placental interface. This series of studies has led to the design of seatbelt features specifically for the pregnant women to enable them use the seatbelt correctly and comfortably.
The current Brussels EU Regulation No. 1235/2011, valid from May 30, 2012, has introduced an European Tyre Label with wet grip index G classes from A to G for passenger car tyres C1, light commercial vehicles tyres C2 and heavy truck- and bus tyres C3. Every wet grip class for each vehicle category has a defined band of numerical values for the wet grip index G. The legislated wet grip values G in this EU- Regulation are very low. The measured braking distances and corresponding impact speeds of the test vehicles are showing very critical results. Regulation No. 1235/2011 of the European Parliament and the Council for Type Approval of Vehicles (EU) should be changed in such a way, that for C1-tyres (normal passenger cars tyres) the minimum wet grip index G is 1.25. All C2-tyres (light commercial vehicles tyres) should at least meet a minimum wet grip index of G = 1.1. All C3-tyres (heavy trucks and buses tyres) should at least meet a minimum wet grip index of G = 0.95. Due to the missing lower limits for G in the wet grip class F for C1, C2 and C3 tyres according to Commission Regulation (EU) No. 1235/2011, officially valid from 30 May 2012, a tyre-to-road coefficient of adhesion in the extreme of 0 (zero) is legally permitted. This is an apparent flaw in above cited EU Regulation, which causes a potential danger to the road traffic safety for all motor vehicles in Europe with such tyres. The wet grip class F has to be removed urgently from said EURegulation, since a direct liability of the responsible EU-Commission can not be excluded.
This work aimed for getting the main features of accidents involving Light Goods Vehicles (LGV), using accident cases collected in the In-Depth Accidents Studies built up at IFSTTAR-LMA (France), in order to analyse thoroughly the proceedings of these accidents and identify the major factors for the different types of LGV. This work was based on the analysis of 88 accident cases involving LGV with a Maximum Authorised Mass inferior to 3.5 tonnes. In particular kinematics reconstruction of these accidents were performed to calculate the average impact speeds and to better understand the compatibility problems between LGV and antagonist vehicles. Specific features have been reviewed to pick up problems concerning safety, maintenance, loading, LGV design: general conditions of the accident, vehicle features, and passive safety. The main results of this study are presented in this paper.
Vorgestellt werden Ergebnisse aus der Untersuchung "Vergleich verschiedener Modellierungsprogramme zur Berechnung von Luftschadstoffen". Die Untersuchung wurde begleitend zu der Pilotstudie "NO2-Reduktion an Ti02-dotierten Lärmschutzwänden (LSW) an der A1" durchgeführt. Projektziel war der Vergleich von drei Ausbreitungsmodellen sowie die Auswahl eines geeigneten Modells für ein zu entwickelndes Online-Monitoring-System. Es wurde festgestellt, dass sich die Modellergebnisse infolge der Umsetzung kleinräumiger Details unterscheiden sowie dass alle Modelle lediglich geringe NOx-Minderungen in Folge der katalytischen Oberflächenbeschichtung anzeigen. In den numerischen Modellen wird die photokatalytische Wirkung der Ti02-beschichteten Lärmschutzwand über einen Depositionsprozess berücksichtigt. Unter Berücksichtigung der Hintergrundbelastung und der NOx-NO2-Umwandlung würde sich die Wirkung des Katalysators im Maximum auf weniger reduzieren. Die Messungen zeigten keine eindeutige Wirkung bezüglich der Immissionskonzentrationen im Bereich der beschichteten beziehungsweise unbeschichteten LSW an.
While it is important to track trends in the number of road accidents in different countries using national statistics, there is a need for data with more detailed information, so called in-depth accident data. For this reason, several accident data projects emerged worldwide in recent years. However, also different data standards were established and so comparative analysis of international in-depth data has been very hard to conduct, so far. This is why the project iGLAD (Initiative for the Global Harmonization of Accident Data) was established and created the prerequisites for building up a standardized dataset out of the common denominator of different in-depth accident databases from Europe, USA and Asia. In the first phase, the project received funding from ACEA to compile an initial database. To accomplish this, a suitable data scheme has been defined, a pilot study has been conducted as proof of concept and the recoding of the first common data base has been initiated. Also, to prepare the project for its self-supporting continuation in the next years, a business model has been developed. This paper reports the history and status of the project, the current challenges and the creation of a capable consortium to maintain the data. In mid-2014, the initial database containing 1550 cases from 10 different countries will be completed and a first detailed view on this data will be possible.
Introduction: The method of causation analysis applied under the German accident survey GIDAS, which is based on Accident Causation Analysis System (ACAS) focuses on an on-scene data collection of predominantly directly event-related causation factors which were crucial in the accident emergence as situational resulting events and influences. The paradigm underlying this method refers to the findings of the psychological traffic accident research that most causally relevant features of the system components human, infrastructure and vehicle technology are found directly in the situation shortly before the accident. This justifies the survey method which is conducted directly at the accident (on-scene), shortly after the accident occurrence (in-time) with the detection of human-related causes (in-depth). Human aspects of the situation analysis that interact and influence the risk situations shortly before the collision are reported as errors, lapses, mistakes and failures in ACAS in specific categories and subcategories. Thus methodically ACAS is designed primarily for the collection of accident features on the level of operational action, which certainly leads to valid findings and behavioral causes of accidents. The enhancement by means of Moderating Conditions concerns the pre-crash phase in different levels: strategical, tactical and operational.
Road accidents are typically analyzed to address influences of human, vehicle, and environmental (primarily infrastructure) factors. A new methodology, based on a "Venn diagram" analysis, gives a broader perspective on the probable factors, and combinations of factors, contributing both to the occurrence of a crash and to sustaining injuries in that crash. The methodology was applied to 214 accidents on the Mumbai-Pune expressway. Factors contributing to accidents and injuries were addressed. The major human factors influencing accidents on this roadway were speeding (30%) and falling asleep (29%), while injuries were primarily due to lack of seat belt use (46%). The leading infrastructure factor for injuries was impact with a roadside manmade structure (28%), and the main vehicle factor for injuries was passenger compartment intrusion (73%). This methodology can help identify effective vehicle and infrastructure-related solutions for preventing accidents and mitigating injuries in India.
The project UR:BAN "Cognitive assistance (KA)" aims at developing future assistance systems providing improved performance in complex city traffic. New state-of-the-art panoramic sensor technologies now allow comprehensive monitoring and evaluation of the vehicle environment. In order to improve protection of vulnerable road users such as pedestrians and cyclists, a particular objective of UR:BAN is the evaluation and prediction of their behaviour and actions. The objective of subproject "WER" is development support by providing quantitative estimates of traffic collisions at the very start and predict potential in terms of optimized accident avoidance and reduction of injury severity. For this purpose an integrated computer simulation toolkit is being devised based on real world accidents (GIDAS as well as video documented accidents), allowing the prediction of potential effectiveness and future benefit of assistance systems in this accident scenario. Subsequently, this toolkit may be used for optimizing the design of implemented assistance systems for improved effectiveness.
Ruptures and dissections of the thoracic and abdominal aortic vessel caused by traffic accidents are rare but potentially life-threatening injuries. They can occur by blunt trauma via seat belt or dashboard injury. The study aimed at evaluating the overall mortality, morbidity, neurological disorders, and differences in operative procedures of open repair and stenting. It shows that, with a change and improvement in diagnostic tools and surgical approach, mortality and morbidity of blunt aortic injuries were significantly reduced. Still an immediate life-threatening injury early diagnosis via multiple-slice and scans and surgical repair with minimally invasive stents showed excellent short-time results for selected patients.
This study aimed at prediction of long bone fractures and assessment of lower extremity injury mechanisms in real world passenger car to pedestrian collision. For this purpose, two pedestrian accident cases with detail recorded lower limb injuries were reconstructed via combining MBS (Multi-body system) and FE (Finite element) methods. The code of PC Crash was used to determine the boundary conditions before collision, and then MBS models were used to reproduce the pedestrian kinematics and injuries during crash. Furthermore, a validated lower limb FE model was chosen to conduct reconstruction of injuries and prediction of long bone fracture via physical parameters of von Mises stress and bending moment. The injury outcomes from simulations were compared with hospital recorded injury data and the same long bone fracture patterns and positions can be observed. Moreover, the calculated long bone fracture tolerance corresponded to the outcome from cadaver tests. The result shows that FE model is capable to reproduce the dynamic injury process and is an effective tool to predict the risk of long bone fractures.
India is one of the leading countries reporting highest road accidents & related injuries. TMARG (Tata Motors Accident Research Group) has been recording crashes in association with M/s. Lokamanya Medical Foundation since 2011 with M/s, Amandeep Hospitals since Aug 2013. This study has highlighted some accident types not discussed extensively in literature. Trucks to Truck impacts " Cabin interaction with overhanging loadbody structures and Offset underside impacts for passenger vehicles are seen in significant numbers. The paper discusses these in more detail including severity.
This study aimed at comparing head Wrap Around Distance (WAD) of Vulnerable Road User (VRU) obtained from the German in-depth Accident Database (GIDAS), the China in-depth Accident Database (CIDAS) and the Japanese in-depth Accident Database (ITARDA micro). Cumulative distribution of WAD of pedestrian and cyclist were obtained for each database (AIS2+) showing that WAD of cyclists were larger than the ones of pedestrians. Comparing three regions, the 50%tile WAD of GIDAS was larger than that of both Asian accident databases. Using linear regression that might predict WAD of pedestrians and cyclists from Impact speed and VRU height, WADs were calculated to be 206cm/219cm (Pedestrian/Cyclist) for GIDAS, 170cm/192cm for CIDAS and 211cm/235cm for ITARDA. In addition, this study may be helpful for reconsideration of WAD measurement alignment between accident reconstruction and test procedures.
The declining trend since 1991 in the number of killed people was broken in 2011 when overall 4 009 people died in traffic accidents in Germany. The question arises if there is a stagnating trend of fatalities in Germany in future? By breaking down the accidents with casualties towards a monthly view one can see a decreasing trend of fatalities in the warmer months especially since 2009. When comparing against winter months higher deviations are observed. In December 2011 an increase of 191 traffic deaths were registered (181 in 2010 compared to 372 in 2011). Further analyses of different accident influences were evaluated and their possibility of drastic change from one year to the other was determined. As seen weather- and environmental conditions are one of the major contributing factors and are one of the causes for the increased number of fatalities. To support the underlying assumption a model had been created to calculate the number of traffic deaths on a daily basis approach. As an input, road conditions projected through weather parameters and also different driving behaviors on weekdays or holidays were used. As a result, estimates of daily fatality with up to 75% precision can be achieved out of the 2009, 2010 and 2011 data. Further on it shows that weather and street conditions have a high influence on the overall resulting number of traffic accidents with casualties, and especially to the number of fatalities. Hence it is estimated that approximately 3 300 people were killed in traffic accidents in Germany in 2013 which would be again a reduction of another 13% compared to 2012. Therefore an answer to the question will be that the decreasing trend in traffic fatalities in Germany somehow is not broken when environmental conditions are included in national statistics. Their effects will become more visible in future accident statistics and it is estimated variances of 5% to 8% of the annual number of traffic fatalities in Germany will be seen.
The changed focus in vehicle safety technology from secondary to primary safety systems need to evolve new methods to investigate accidents, high critical, critical and normal driving situations. Current Naturalistic Driving Studies mostly use vehicles that are highly equipped with additional measuring devices, video cameras, recording technology, and sensors. These equipped fleets are very expensive regarding the setup and administration of the study. Due to the great rarity of crashes it is additionally necessary to have a high distribution and a homogeneous distribution of subject groups. At the end all these facts are leading to a very expensive study with a manageable number of data. Smartphones are becoming more and more popular not only for younger people. Contrary to traditional mobile phones they are mostly equipped with sensors for acceleration and yaw rates, GPS modules as well as cameras in high definition resolution. Additionally they have high-performance processors that enable the execution of CPU-intensive tools directly on the phone. The wide distribution of these smartphones enables researchers to get high numbers of users for such studies. The paper shows and demonstrates a software app for smartphones that is able to record different driving situations up to crashes. Therefore all relevant parameter from the sensors, camera and GPS device are saved for a given duration if the event was triggered. The complete configuration is independently adjustable to the relevant driver and all events were sent automatically to the research institute for a further process. Direct after the event, interviews with the driver can be done and important data regarding the event itself are documented. The presentation shows the methodology and gives a demonstration of the working progress as well as first results and examples of the current study. In the discussion the advantages of this method will be discussed and compared with the disadvantages. The paper shows an alternative method to investigate real accident and incident data. This method is thereby highly cost efficient and comparable with existing methods for benefit estimation.
For the estimation of the benefit and effect of innovative Driver Assistance Systems (DAS) on the collision positions and by association on the accident severity, together with the economic benefit, it becomes necessary to simulate and evaluate a variety of virtual accidents with different start values (e.g. initial speed). Taken into account the effort necessary for a manual reconstruction, only an automated crash computation can be considered for this task. This paper explains the development of an automated crash computation based on GIDAS. The focus will be on the design of the virtual vehicle models, the method of the crash computation as well as exemplary applications of the automated crash computation. For the first time an automated crash computation of passenger car accidents has been realized. Using the automated crash computation different tasks within the field of vehicle safety can be elaborated. This includes, for example, the calculation of specific accident parameters (such as EES or delta-V) for various accident constellations and the estimation of the economic benefit of DAS using IRFs (Injury Risk Functions).
Pedestrians represent about 20% of the overall fatalities in Europe- road traffic accidents. In this paper a methodology is proposed to understand why the numbers are so high, especially in the south of Europe and particularly in Portugal, . First a detailed statistical analysis using Ordinal Logistic Regression model (OLR) was applied to the gathered data from all Portuguese accidents with victims in the period 2010-2012. In a second stage accident reconstruction computational techniques using pedestrian biomechanical models are used to evaluate the accident conditions that lead to the injuries, such as the speed and the impact location. For biomechanical injury criterions, the AIS (Abbreviated Injury Scale), the HIC (Head Injury Criterion) and other injury criterions based on the resulting accelerations in the pedestrian's body are used. The statistical model reported that there were several predictors that significantly influenced the pedestrian injury severity in the event of a road accident, such as Pedestrian's age, Pedestrian's gender, Vehicle Design/Category or Driver's gender. The use of injury scales and biomechanical criterions in in-depth investigation of road accidents, such as AIS, can significantly improve the quality of the reconstruction process.
Vorgestellt werden Vorgehensweise, Datenaufbereitung, Modellaufbau und Ergebnisse des BASt-Projekts "Numerische Simulation der Stickoxidminderung durch photokatalytische Oberflächen an Verkehrswegen". Die Vorteile des Konzepts liegen in der Berücksichtigung von Zeitreihen (Eingangsdaten, Ausbreitungsrechnung) und in der Tatsache, dass die Depositionsgeschwindigkeit als zeitlich variable Eingangsgröße bei der Modellierung berücksichtigt wurde. Die Ergebnisse liegen entsprechend als Zeitreihen vor (Jahres- oder Tagesgänge können untersucht werden). Es ergab sich eine Minderung der NO2-Belastung um maximal knapp 1.5% im Nahbereich der Lärmschutzwand. Wesentlicher Faktor bei der Wirksamkeit photokatalytischer Oberflächen ist die Interaktion zwischen Gesamtbelastung und Depositionsgeschwindigkeit im Tagesverlauf.
The paper gives an overview of the recent (mostly 2012) figures of killed bus/coach occupants (drivers and passengers) in 27 Member States of the European Union as reported by CARE. The Evolution of the figures of bus/coach occupants killed in road accidents urban, rural without motorway and on motorways from 1991 to 2010 in 15 Member States of the EU supplements this information. More detailed are the figures reported for Germany by the Federal Statistics. The paper displays long-term evaluations (1957 to 2012) for killed, seriously and slightly injured occupants in all kinds of buses/coaches. Midterm evaluations (1995 to 2012) of the figures of fatalities and casualties are displayed for different busses according to their identification of road using as coaches, urban buses, school buses, trolley buses and "other buses". To be able to compare the evolutions of the safety of vehicle occupants it is customary to use different risk indicators. Calculations and illustrations for three often used indicators with their development over time are given: fatalities, seriously injured and slightly injured per 100,000 vehicles registered, per 1 billion (109) vehicle-kilometres travelled and per 1 billion (109) person-kilometres. These indicators are shown for occupants of cars, goods vehicles and buses/coaches. For the period from 1957 until 2012 it is obvious, that for all three vehicle categories analysed there was a clear long-term trend towards more occupant safety in terms of casualties per vehicles registered and per vehicle mileage. This was most significant for car occupants but it can be seen for bus/coach occupants and goodsvehicle occupants as well. Figures of killed occupants and of casualties related to person-kilometres are calculated and displayed for the shorter period 1995 to 2012. Here it becomes obvious that the bus/coach is still the safest mode of transport for the occupants of road vehicles. Graphs for the casualty risk indices still show significantly higher risks for car occupants despite the corresponding curve moved sustainable downwards. It is remarkable, that the risks of being killed or injured for the occupants of urban buses is growing whereas the corresponding risk for the occupants of coaches in line traffic tends downwards. The article ends with a short comparison and discussion of the risk indicators which are actually published for the occupants (driver and passengers) of cars and the passengers of buses/coaches, railroads, trams and airplanes. The interpretation of such information depends on the perception and it seems that for a complete view not only one indicator should be used and the evolutions of the indicator values during longer periods (as displayed with examples in the paper) should also be taken into account.
Within the COST Action TU1101 the working group WG 1 is dealing with acceptance criteria and problems in helmet use while bicycling concerning conspicuity, thermal stress, ventilation deficits and other potential confounding. To analyze the helmet usage practice of bicyclists in Europe a questionnaire was developed in the scope of working group 1 to collect relevant information by means of a field study. The questionnaire consists of some 66 questions covering the fields of personal data of the cyclist, riding und helmet usage habits, information concerning the helmet model and the sensation of the helmet, as well as information on previous bicycle accidents. A second complementary study is conducted to analyze if the use of a bicycle helmet influences the seating geometry and the posture of cyclists when riding a bicycle and if the if the helmet vertically limits the vision. For this purpose cyclists with and without helmets were photographed in real world situations and relevant geometrical values such as the decline of the torso, the head posture of the upper vertical vision limit due to the helmet were established from the photos. The interim results of the field studies which were conducted in Germany by the Hannover Medical School are presented in this study. Some 227 questionnaires were filled out, of which 67 participants had used a helmet and 42 of the 227 participants have had a bicycle accident before. For the analysis of the riding position and posture of the cyclist over 40 pictures of riders with a helmet and over 240 pictures of riders without a helmet were measured concerning the seating geometry to describe the influence of using a bicycle helmet. Some results in summary: From the riders interviewed with the questionnaire only 11% of the city bike riders and 12% of the mountain bike riders always used the helmet, while 38% of the racing bike riders and 88% of the e-bike-riders always used the helmet. The helmet use seems not to change the sensation of safety of cycling compared to the use of a car. The arguments for not wearing a helmet are mostly stated to be the short distance of a trip, high temperatures or carelessness and waste of time. The reasons for using a helmet are stated to be the feeling of safety and being used to using a helmet. Being a role model for others was also stated to be a reason for helmet use. Concerning the sensation of the helmet 9% of the riders reported problems with the field of vision when using a helmet, 57% saw the problem of sweating too much, and 10% reported headaches or other unpleasant symptoms like pressure on the forehead when using the helmet. The analysis of the seating posture from the pictures taken of cyclists revealed that older cyclists generally have a riding position where the handle bar is higher than the seat (0-° to 10-° incline from seat to handlebar), while younger riders had a higher variance (between -10-° decline and 20-° incline). Further, elderly riders and riders with helmets seem to have a more upright position of the upper body when cycling. The vertical vision limit due to the helmet is determined by the front rim of the helmet (mostly the sun shade). Typical values here range from 0-° (horizontal line from the eye to the sun shade) to 75-° upwards, in which elderly riders tend to have a slightly higher vertical vision limit possibly due to the helmet being worn more towards the face.
Although the annual traffic accident statistics published by the national police is available in public, the detailed traffic accident data has not been released in Korea. Recently the Ministry of Land, Infrastructure and Transport recognized the importance of in-depth accident data to enhance road traffic safety and initiated a research project to establish a collection of the detailed accident data. The main objective of the project is a feasibility study to establish KIDAS (Korea In-Depth Accident Study). Within this project, three university hospitals which are located in mid-size cities have been selected to collect accident data. Annually, more than 500 cases of accidents have been collected from the in-patient's interviews and diagnosis. Unlike GIDAS (German In-Depth Accident Study), currently on-site investigation can"t be performed by the Korean police. The only available data is patient medical records, patient's description of accident circumstances and the damaged vehicle. Occasionally the police provide the accident investigation reports containing very brief information on accident causation and vehicle safety. In a first step, the concept of KIDAS is to adopt the format of iGLAD (Initiative for the Global Harmonization of Accident Data) for harmonization. Since the currently collected accident information is extremely limited compared with GIDAS, the other sources of data and calculations such as KNCAP vehicle data, pc-crash simulations, vehicle registration information, insurance company data are utilized to complete the iGLAD template. Results from KIDAS_iGLAD and the cases of assessment of active safety devices such as AEBS, ESC, and LDWS will be evaluated.
Since a number of human models have been developed it appears sensible to use these models also in the accident analysis. Especially the understanding of injury mechanisms and probably even injury risk curves can be significantly improved when interesting accidents are reconstructed using human body models. However, an important limitation for utilising human models for accident reconstruction is the effort needed to develop detailed FE models of the accident partners or to prepare the human model reconstruction by running physical accident reconstructions. The proposed approach for using human models for accident reconstruction is to use simplified and parametric car models. These models can be adapted to the crash opponents in a fast and cost effective way. Although, accuracy is less compared to detailed FE models, the relevant change in velocity can be simulated well, indicating that the computation of a detailed crash pulse is not needed. Two frontal impact test accidents that were reconstructed experimentally and using the parametric car models are indicating sufficient correlation of the adapted parametric car models with the full scale crash reconstructions. However, further developments of the parametric models to be capable for the use in lateral impacts and rear impacts are needed. For the PC Crash simulation runs the output sampling rate is too large to allow sufficient analysis. In addition the performance appears to be too general.
The main focus of the benefit estimation of advanced safety systems with a warning interface by simulation is on the driver. The driver is the only link between the algorithm of the safety system and the vehicle, which makes the setup of a driver model for such simulations very important. This paper describes an approach for the use of a statistical driver model in simulation. It also gives an outlook on further work on this topic. The build-up process of the model suffices with a distribution of reaction times and a distribution of reaction intensities. Both were combined in different scenarios for every driver. Each scenario has then a specific probability to occur. To use the statistical driver model, every accident scene has to be simulated with each driver scenario (combinations of reaction times and intensities). The results of the simulations are then combined regarding the probabilities to occur, which leads to an overall estimated benefit of the specific system. The model works with one or more equipped participants and delivers a range for the benefit of advanced safety systems with warning interfaces.
The study aimed at estimating the impact of pedelecs (with an assumed higher speed than bicycles) on the traffic accident severity in Germany for different penetration rates. The analysis shows that in many real situations (68%) an electrical support of bicycles has no influence on the sequence of accident events. Taking into account a number of unreported "single bicycle accidents", the adoption of similar traffic behavior and similar age distribution, the authors determined a shift of 400 former slightly to seriously injured cyclists in Germany per year. Overall this would be an increase of approximately 2.3% in case of 10% of pedelec penetration with the pessimistic assumption of 10 km/h speed increase although first natural driving studies predict a much lower average speed increase of pedelecs. The hypothesis verbalized in the initial question whether a higher distribution of pedelecs will result in more severe accidents in Germany is not verified. The study shows that electrical support didn"t result in higher collision speed in general. In many accident situations, the speed of pedelecs has only a minor influence on the accident severity. Further research focusing on a possible change of driver behavior especially in new target groups (elderly people) will be needed.