Sonstige
Filtern
Erscheinungsjahr
Dokumenttyp
Sprache
- Englisch (337) (entfernen)
Schlagworte
- Conference (253)
- Konferenz (252)
- Accident (137)
- Unfall (137)
- Germany (134)
- Deutschland (131)
- Injury (101)
- Verletzung (100)
- Unfallrekonstruktion (73)
- Analyse (math) (61)
- Analysis (math) (60)
- Statistics (59)
- Schweregrad (Unfall, Verletzung) (58)
- Statistik (58)
- Severity (accid, injury) (56)
- Tödlicher Unfall (54)
- Fatality (53)
- Simulation (48)
- Fußgänger (47)
- Pedestrian (47)
- Reconstruction (accid) (47)
- Safety (47)
- Sicherheit (46)
- injury) (45)
- Schweregrad (Unfall (43)
- Verletzung) (43)
- Bewertung (42)
- Car (42)
- Datenbank (42)
- Data acquisition (41)
- Datenerfassung (41)
- Evaluation (assessment) (41)
- Severity (accid (39)
- Anfahrversuch (37)
- On the spot accident investigation (37)
- Untersuchung am Unfallort (37)
- Cause (36)
- Collision (36)
- Fahrzeug (36)
- Ursache (36)
- Vehicle (36)
- Zusammenstoß (36)
- Unfallverhütung (31)
- Accident prevention (30)
- Radfahrer (30)
- Cyclist (29)
- Data bank (29)
- Frontalzusammenstoß (29)
- Europa (28)
- Europe (28)
- Head on collision (28)
- Motorcyclist (27)
- Motorradfahrer (27)
- Accident reconstruction (26)
- Driver (26)
- Fahrer (26)
- Geschwindigkeit (26)
- Impact test (veh) (26)
- Fahrerassistenzsystem (25)
- Speed (25)
- Insasse (23)
- Leistungsfähigkeit (allg) (23)
- Prüfverfahren (23)
- Test method (23)
- Active safety system (22)
- Driver assistance system (22)
- Test (22)
- PKW (21)
- Aktives Sicherheitssystem (20)
- Efficiency (20)
- Method (20)
- Passives Sicherheitssystem (20)
- Vehicle occupant (20)
- Risiko (19)
- Versuch (19)
- Passive safety system (18)
- Pkw (18)
- Verfahren (18)
- Interview (17)
- Benutzung (16)
- Child (16)
- Head (16)
- Kind (16)
- Kopf (16)
- Risk (16)
- Sicherheitsgurt (16)
- Use (16)
- Anthropometric dummy (15)
- Biomechanics (15)
- Biomechanik (15)
- Motorrad (15)
- Risikobewertung (15)
- Seitlicher Zusammenstoß (15)
- Motorcycle (14)
- Risk assessment (14)
- Safety belt (14)
- Side impact (14)
- Accident rate (13)
- Dummy (13)
- Leg (human) (13)
- Alte Leute (12)
- Auffahrunfall (12)
- Brustkorb (12)
- Fahrzeugsitz (12)
- Improvement (12)
- Rear end collision (12)
- Rechenmodell (12)
- Unfallhäufigkeit (12)
- Verbesserung (12)
- Überschlagen (12)
- Behaviour (11)
- Database (11)
- Development (11)
- Entwicklung (11)
- Mathematical model (11)
- Measurement (11)
- Old people (11)
- Schutzhelm (11)
- Seat (veh) (11)
- Verhalten (11)
- Airbag (10)
- Berechnung (10)
- Crash helmet (10)
- Deformation (10)
- Fehler (10)
- Human factor (10)
- Krankenhaus (10)
- Menschlicher Faktor (10)
- Messung (10)
- Overturning (veh) (10)
- Thorax (10)
- Age (9)
- Alter (9)
- Bein (menschl) (9)
- Bremsung (9)
- Calculation (9)
- Error (9)
- Fahranfänger (9)
- Front (9)
- Hospital (9)
- Impact test (9)
- Japan (9)
- Prognose (9)
- Recently qualified driver (9)
- USA (9)
- Verformung (9)
- Wirbelsäule (9)
- Air bag (restraint system) (8)
- Braking (8)
- Digital model (8)
- Erste Hilfe (8)
- Lorry (8)
- Numerisches Modell (8)
- Prevention (8)
- Antikollisionssystem (7)
- Austria (7)
- Cervical vertebrae (7)
- Fracture (bone) (7)
- Halswirbel (7)
- Impact study (7)
- Interior (veh) (7)
- Knee (human) (7)
- Knochenbruch (7)
- Modification (7)
- Spinal column (7)
- Standardisierung (7)
- Vereinigtes Königreich (7)
- Veränderung (7)
- Österreich (7)
- Adolescent (6)
- China (6)
- Collision avoidance system (6)
- Compatibility (6)
- Cost benefit analysis (6)
- Driver training (6)
- EU (6)
- Fahrausbildung (6)
- Fahrzeuginnenraum (6)
- First aid (6)
- Forecast (6)
- India (6)
- Indien (6)
- Jugendlicher (6)
- Knie (menschl) (6)
- Knotenpunkt (6)
- Kompatibilität (6)
- Ort (Position) (6)
- Portugal (6)
- Research report (6)
- Software (6)
- Standardization (6)
- Transport infrastructure (6)
- Vehicle regulations (6)
- Verminderung (6)
- Vorn (6)
- Wirksamkeitsuntersuchung (6)
- Wirtschaftlichkeitsrechnung (6)
- Analyse (Math) (5)
- Angle (5)
- Autobahn (5)
- Correlation (math, stat) (5)
- Decrease (5)
- Deformable barrier (impact test) (5)
- Delivery vehicle (5)
- Eins (5)
- Electronic stability program (5)
- Fahrstabilität (5)
- Forschungsarbeit (5)
- Frau (5)
- Human body (5)
- Impact sled (5)
- International (5)
- Location (5)
- Menschlicher Körper (5)
- One (5)
- Policy (5)
- Politik (5)
- Post crash (5)
- Research project (5)
- Sensor (5)
- Technologie (5)
- Technology (5)
- Tunnel (5)
- Vehicle handling (5)
- Verhütung (5)
- Verkehrsinfrastruktur (5)
- Winkel (5)
- Abdomen (4)
- Aufprallschlitten (4)
- Automatisch (4)
- Belastung (4)
- Bemessung (4)
- Bremse (4)
- Classification (4)
- Coefficient of friction (4)
- Collision test (veh) (4)
- Damage (4)
- Deformierbare Barriere (Anpralltest) (4)
- Design (overall design) (4)
- Detection (4)
- Distraction (4)
- Driver information (4)
- Driving (veh) (4)
- Drunkenness (4)
- Dynamics (4)
- Dynamik (4)
- Einstellung (psychol) (4)
- Elektronisches Stabilitätsprogramm (4)
- Erziehung (4)
- Estimation (4)
- Fahrdatenschreiber (4)
- Fahrgeschicklichkeit (4)
- Fahrzeugführung (4)
- Finite element method (4)
- Fire (4)
- Forschungsbericht (4)
- France (4)
- Frankreich (4)
- Gesetzgebung (4)
- Highway design (4)
- Information (4)
- Junction (4)
- Klassifizierung (4)
- Korrelation (math, stat) (4)
- LKW (4)
- Legislation (4)
- Load (4)
- Medical aspects (4)
- Medizinische Gesichtspunkte (4)
- Motorway (4)
- Oberflächentextur (4)
- Occupant (veh) (4)
- Probability (4)
- Regression analysis (4)
- Regressionsanalyse (4)
- Reibungsbeiwert (4)
- Reproducibility (4)
- Reproduzierbarkeit (4)
- Sachschaden (4)
- Schutzeinrichtung (4)
- Schweden (4)
- Seite (4)
- Severity (acid (4)
- Sichtbarkeit (4)
- Straßenentwurf (4)
- Surface texture (4)
- Technische Vorschriften (Kraftfahrzeug) (4)
- Trunkenheit (4)
- Unfallfolgemaßnahme (4)
- United Kingdom (4)
- Unterleib (4)
- Verkehrsteilnehmer (4)
- Sichtbarkeit (4)
- Wahrscheinlichkeit (4)
- Woman (4)
- Ablenkung (psychol) (3)
- Anti locking device (3)
- Attitude (psychol) (3)
- Ausrüstung (3)
- Automatic (3)
- Autonomes Fahren (3)
- Autonomous driving (3)
- Befreiung (Bergung) (3)
- Bein (3)
- Bicycle (3)
- Blickfeld (3)
- Brake (3)
- Bus (3)
- Camera (3)
- Coach (3)
- Crash test (3)
- Czech Republic (3)
- Decision process (3)
- Detektion (3)
- Digitale Bildverarbeitung (3)
- Durability (3)
- Education (3)
- Effectiveness (3)
- Electric vehicle (3)
- Elektrofahrzeug (3)
- Entscheidungsprozess (3)
- Equipment (3)
- Event data recorder (road vehicle) (3)
- Extrication (3)
- Fahrrad (3)
- Field of vision (3)
- Gefahrenabwehr (3)
- Griffigkeit (3)
- Information documentation (3)
- Kamera (3)
- Kleidung (3)
- Korea (Süd) (Demokratische Republik) (3)
- Lieferfahrzeug (3)
- Lkw (3)
- Main road (3)
- Man (3)
- Mann (3)
- Medizinische Untersuchung (3)
- Methode der finiten Elemente (3)
- Norm (tech) (3)
- Overlapping (3)
- Passenger (3)
- Reisebus (3)
- Republic of Korea (3)
- Road network (3)
- Road user (3)
- Run off the road (accid) (3)
- Safety fence (3)
- Security (3)
- Skidding resistance (3)
- Skill (road user) (3)
- Spain (3)
- Spanien (3)
- Specification (standard) (3)
- Specifications (3)
- Steifigkeit (3)
- Stiffness (3)
- Straßennetz (3)
- Time (3)
- Tschechische Republik (3)
- United kingdom (3)
- Verschiebung (3)
- Versuchspuppe (3)
- Vorne (3)
- Windschutzscheibe (3)
- Zeit (3)
- Abbiegen (2)
- Abkommen von der Fahrbahn (Unfall) (2)
- Absorption (2)
- Accompanied driving (2)
- Accuracy (2)
- Adult (2)
- Advanced driver assistance system (2)
- Air pollution (2)
- Antiblockiereinrichtung (2)
- Apparatus (measuring) (2)
- Australia (2)
- Australien (2)
- Automatische Notbremsung (2)
- Autonomes Fahrzeug (2)
- Autonomous emergency braking (2)
- Autonomous vehicle (2)
- Begleitetes Fahren (2)
- Behinderter (2)
- Beinahe Unfall (2)
- Blutkreislauf (2)
- Boden (2)
- Body (car) (2)
- Brand (2)
- Bremsweg (2)
- Carbon dioxide (2)
- Circulation (blood) (2)
- Climate change (2)
- Clothing (2)
- Communication (2)
- Compliance (specif) (2)
- Contact (tyre road) (2)
- Cost (2)
- Crash Test (2)
- Crash victim (2)
- Crashtest (2)
- Crossing the road (2)
- Data base (2)
- Dauerhaftigkeit (2)
- Depth (2)
- Deutschalnd (2)
- Digital image processing (2)
- Disablement (2)
- Dreidimensional (2)
- Driving test (2)
- EU directive (2)
- EU-Richtlinie (2)
- Edge (2)
- Eindringung (2)
- Eingabedaten (2)
- Electric bicycle (2)
- Electronic driving aid (2)
- Elektrofahrrad (2)
- Emergency (2)
- Emission (2)
- Entdeckung (2)
- Ergonomics (2)
- Ergonomie (2)
- Erwachsener (2)
- Eu (2)
- Exhaust aftertreatment (2)
- Experience (human) (2)
- Expert system (2)
- Expertensystem (2)
- Fahrbahnüberquerung (2)
- Fahrerinformation (2)
- Fahrprüfung (2)
- Fahrsimulator (2)
- Fernverkehrsstraße (2)
- Feuer (2)
- Foot (not a measure) (2)
- Fuß (2)
- Führerschein (2)
- Geländefahrzeug (2)
- Gesetzesübertretung (2)
- Gewicht (2)
- Government (national) (2)
- Harmonisation (2)
- Hazard (2)
- Head restraint (2)
- Highway (2)
- Hinten (2)
- In service behavior (2)
- Incident detection (2)
- Input data (2)
- Intelligent transport system (2)
- Intersection (2)
- Jahreszeit (2)
- Karosserie (2)
- Klimawandel (2)
- Kommunikation (2)
- Kontakt Reifen Straße (2)
- Kontrolle (2)
- Kopfstütze (2)
- Kosten (2)
- Kunststoff (2)
- Landstraße (2)
- Langfristig (2)
- Learning (2)
- Long term (2)
- Luftverunreinigung (2)
- Medical examination (2)
- Messgerät (2)
- Methode der finite Elemente (2)
- Mobile phone (2)
- Mobiltelefon (2)
- Model (not math) (2)
- Modell (2)
- Motorisierungsgrad (2)
- Movement (2)
- Near miss (2)
- Netherlands (2)
- Niederlande (2)
- Notfall (2)
- Offence (2)
- Output (2)
- Penetration (2)
- Planning (2)
- Planung (2)
- Plastic material (2)
- Posture (2)
- Prototyp (2)
- Prototype (2)
- Public transport (2)
- Quality (2)
- Quality assurance (2)
- Qualität (2)
- Qualitätssicherung (2)
- Reaction (human) (2)
- Reaktionsverhalten (2)
- Rear (2)
- Recording (2)
- Regierung (staat) (2)
- Restraint system (2)
- Richtlinien (2)
- Risk taking (2)
- Road traffic (2)
- Rural road (2)
- Season (2)
- Shock (2)
- Side (2)
- Simulator (driving) (2)
- Soil (2)
- Sport utility vehicle (2)
- Straße (2)
- Straßenverkehr (2)
- Straßenverkehrsrecht (2)
- Störfallentdeckung (2)
- Surfacing (2)
- Surveillance (2)
- Sweden (2)
- Telefon (2)
- Telephone (2)
- Theorie (2)
- Theory (2)
- Three dimensional (2)
- Tiefe (2)
- Traffic (2)
- Traffic regulations (2)
- Traffic restraint (2)
- Trend (stat) (2)
- Turn (2)
- Unfallopfer (2)
- Vehicle ownership (2)
- Verkehr (2)
- Verkehrsbeschränkung (2)
- Weather (2)
- Weight (2)
- Wet road (2)
- Windscreen (veh) (2)
- Witterung (2)
- Zeitreihe (stat) (2)
- Öffentlicher Verkehr (2)
- Überlappung (2)
- (menschl) (1)
- Abfluss (1)
- Ability (road user) (1)
- Abkommen von der Fahrbahn (1)
- Ablenkung (1)
- Abstandsregeltempomat (1)
- Acceleration (1)
- Acceptability (1)
- Accident black spot (1)
- Accident proneness (1)
- Accident severity (1)
- Active safety (1)
- Active safety system; Automatic; Brake; Car; Collision avoidance system; Conference; Driver assistance system; Germany; Impact test (veh); Rear end collision; Severity (accid (1)
- Activity report (1)
- Adaptive cruise controll (1)
- Administration (1)
- Aged people (1)
- Aggression (psycho) (1)
- Aggression (psychol) (1)
- Air quality management (1)
- Air traffic control (1)
- Air transport (1)
- Airbag (restraint system) (1)
- Aktive Sicherheit (1)
- Alternative (1)
- Analyse (1)
- Analyses (math) (1)
- Anthropmetric dummy (1)
- Anthropometrie (1)
- Anthropometry (1)
- Antiblockiersystem (1)
- Arbeitsgruppe (1)
- Arm (human) (1)
- Arm (menschl) (1)
- Arzneimittel (1)
- Asphaltstraße (Oberbau) (1)
- Atives Sicherheitssystem (1)
- Attention (1)
- Audit (1)
- Auffharunfall (1)
- Aufmerksamkeit (1)
- Aufzeichnung (1)
- Aufzeichung (1)
- Autotür (1)
- Back (human) (1)
- Batterie (1)
- Battery (1)
- Bau (1)
- Baumusterzulassung (1)
- Baustoff (1)
- Bearing capacity (1)
- Bein [menschl] (1)
- Bepflanzung (1)
- Beschleunigung (1)
- Bevölkerung (1)
- Bewehrung (1)
- Bicyclist (1)
- Bone (1)
- Braking distance (1)
- Breaking (1)
- Bridge (1)
- Bridge management system (1)
- Bruch (mech) (1)
- Brücke (1)
- Brücken Management System (1)
- Budget (1)
- Cadaver (1)
- Calibration (1)
- Car door (1)
- Carriageway (1)
- Catalytic converter (1)
- Chassis (1)
- Chest (1)
- Clay (1)
- Cognitive impairment (1)
- Colthing (1)
- Comprehension (1)
- Compression (1)
- Computation (1)
- Concentration (chem) (1)
- Condition survey (1)
- Conference; Germany; Injury; Medical examination; Spinal column; X ray (1)
- Construction (1)
- Contact (tyre (1)
- Correlation (1)
- Critical path method (1)
- Cross roads (1)
- Cycle track (1)
- Cycling (1)
- Damping (1)
- Data processing (1)
- Data transmission (telecom) (1)
- Datenverarbeitung (1)
- Datenübertragung (Telekom) (1)
- Datenübertragung (telekom) (1)
- Dauer (1)
- Day (24 hour period) (1)
- Decke (Straße) (1)
- Decke [Straße] (1)
- Deformierte Barriere (Anpralltest) (1)
- Deicing (1)
- Demand (econ) (1)
- Demografie (1)
- Demography (1)
- Density (1)
- Deterioration (1)
- Diagnostik (1)
- Dichte (1)
- Diesel engine (1)
- Diffusion (1)
- Digital computer (1)
- Digitalrechner (1)
- Dispersion (stat) (1)
- Displacement (1)
- Distribution (gen) (1)
- Driving aid (electronic) (1)
- Driving aptitude (1)
- Driving licence (1)
- Driving license (1)
- Droge (1)
- Drugs (1)
- Dtetection (1)
- Durchsichtigkeit (1)
- Dynamic penetration test (1)
- Dämpfung (1)
- Earthworks (1)
- Echtzeit (1)
- Eichung (1)
- Eigenschaft (1)
- Ejection (1)
- Elastizitätsmodul (1)
- Electronics (1)
- Elektronik (1)
- Elektronisches Stabilitätsprogram (1)
- Emergency medical aid (1)
- Empfindlichkeit (1)
- Energie (1)
- Energy (1)
- Enforcement (law) (1)
- Enteisung (1)
- Entgleisung (Zug) (1)
- Environment (1)
- Environment protection (1)
- Erdarbeiten (1)
- Erfahrung (menschl) (1)
- Evaluation (Assessment) (1)
- Event data recorder (Road vehicle) (1)
- Expressway (1)
- Face (human) (1)
- Facility (1)
- Fahrassistenzsystem (1)
- Fahrbahn (1)
- Fahrererfahrung (1)
- Fahrerinformationen (1)
- Fahrleistung (1)
- Fahrstreifen (1)
- Fahrtauglichkeit (1)
- Fahrwerk (1)
- Fahrzeugdach (1)
- Fahrzeugflotte (1)
- Fahrzeugrückhaltesystem (1)
- Fahrzeugteil (Sicherheit) (1)
- Fatigue (human) (1)
- Fear (1)
- Fein (mater) (1)
- Feinstaub (1)
- Fence (1)
- Fernverkehrsstrasse (1)
- Financing (1)
- Finanzierung (1)
- Fine (mater) (1)
- Finland (1)
- Finnland (1)
- Fleet of vehicles (1)
- Flexible pavement (1)
- Flooding (1)
- Flugsicherung (1)
- Form (1)
- Frequency (1)
- Friction (1)
- Fuel consumption (1)
- Fuel tank (1)
- Fugenfüllung (1)
- Furcht (1)
- Fußgängerbereich (1)
- Führerschein Punktesystem (1)
- Gas (1)
- Genauigkeit (1)
- Geografisches Information System (1)
- Geographical information system (1)
- Geomembran (1)
- Geomembrane (1)
- Geometry (shape) (1)
- Geradeausverkehr (1)
- Geschwindigkeitsbeschränkung (1)
- Gesetzesdurchführung (1)
- Gesicht (1)
- Gesundheit (1)
- Greenhouse effect (1)
- Ground water (1)
- Grundwasser (1)
- Haftung (jur) (1)
- Harmonisierung (1)
- Head (human) (1)
- Health (1)
- Heavy metal (1)
- Height (1)
- Herausschleudern (1)
- Hip (human) (1)
- Homogeneity (1)
- Homogenität (1)
- Hospitsl (1)
- Häufigkeit (1)
- Höhe (1)
- Hüfte (1)
- Hüfte (menschl) (1)
- Illness (1)
- Image analysis (1)
- Image generation (1)
- Image processing (1)
- Impact (collision) (1)
- In situ (1)
- Incident management (1)
- Inertia reel safety belt (1)
- Infotainment System (1)
- Infotainment system (1)
- Installation (1)
- Intelligentes Transportsystem (1)
- Intelligentes Verkehrssystem (1)
- Interactive model (1)
- Interaktives Modell (1)
- Interface (1)
- Inventar (1)
- Inventory (1)
- Ireland (1)
- Irland (1)
- Italien (1)
- Italy (1)
- Itinerary (1)
- Kleintransporter (1)
- Knie (1)
- Knochen (1)
- Kognitive Beeinträchtigung (1)
- Kohlendioxid (1)
- Kontakt Reifen-Straße (1)
- Konzentration (1)
- Kopf (menschl) (1)
- Korea (Süd) (1)
- Korn (1)
- Kornverteilung (1)
- Korrelation [math (1)
- Korrelation(Math (1)
- Kraftfahrzeug (1)
- Kraftstofftank (1)
- Krankheit (1)
- Kreisverkehrsplatz (1)
- Kreuzung (1)
- Körperhaltung (1)
- Körperstellung (1)
- Lap strap (1)
- Lateral (1)
- Lateral collision (1)
- Layer (1)
- Lebenszyklus (1)
- Leichnam (1)
- Leistungsfähigkeit (Allg.) (1)
- Length (1)
- Lernen (1)
- Level of service (1)
- Liability (1)
- Links (1)
- Luftreinhaltung (1)
- Lufttransport (1)
- Länge (1)
- Lärm (1)
- Malaysia (1)
- Market (1)
- Markt (1)
- Massenunfall (1)
- Material (constr) (1)
- Materialveraenderung (allg) (1)
- Mathematical Model (1)
- Matrix (1)
- Mean (math) (1)
- Medication (1)
- Merging (1)
- Text (1)
- Mesurement (1)
- Mittelwert (1)
- Mobility (1)
- Mobilität (1)
- Modulus of elasticity (1)
- Montage (1)
- Moped (1)
- Motor (1)
- Multiple collision (1)
- Müdigkeit (1)
- Nachfrage (1)
- Nachricht (1)
- Nasse Strasse (1)
- Nasse Straße (1)
- Network (traffic) (1)
- Netzplantechnik (1)
- Neural network (1)
- Neuronales Netz (1)
- Nigeria (1)
- Nitric acid (1)
- Noise (1)
- Non destructive testing (1)
- Nordamerika (1)
- North America (1)
- Norway (1)
- Norwegen (1)
- Nummer (1)
- Nutzwertanalyse (1)
- Oberfläche (1)
- Official approval (1)
- Offset impact test (1)
- On the left (1)
- On the right (1)
- On the spot investigation (1)
- Organisation (1)
- Organization (association) (1)
- Overturning (1)
- Oxygen (1)
- PVC (1)
- Padding (safety) (1)
- Particle (1)
- Particle size distribution (1)
- Particulate matter (1)
- Partnerschaft (1)
- Partnership (1)
- Peat (1)
- Pedestrian precinct (1)
- Pelvis (1)
- Perception (1)
- Personal (1)
- Personnel (1)
- Pfahl (1)
- Pfosten (1)
- Pile (1)
- Point demerit system (1)
- Pole (1)
- Police (1)
- Polizei (1)
- Pollutant (1)
- Polyvinylchloride (1)
- Population (1)
- Portable (1)
- Position (1)
- Pregnancy (1)
- Preloading (soil) (1)
- Properties (1)
- Protective helmet (1)
- Provisorisch (1)
- Prüefverfahren (1)
- Pssives Sicherheitssystem (1)
- Psychological aspects (1)
- Psychologische Gesichtspunkte (1)
- QAccident (1)
- Quality management system (1)
- Qualitätsmanagementsystem (1)
- Radfahren (1)
- Radweg (1)
- Rail bound transport (1)
- Rail traffic (1)
- Rain (1)
- Rammsondierung (1)
- Real-time (1)
- Rechts (1)
- Reconstruction [accid] (1)
- Reduction (decrease) (1)
- Regen (1)
- Regional planning (1)
- Regionalplanung (1)
- Rehabilitation (1)
- Rehabilitation (road user) (1)
- Reibung (1)
- Reifen (1)
- Reifenprofil (1)
- Reinforcement (in mater) (1)
- Reiseweg (1)
- Republic of Corea (1)
- Research projekt (1)
- Residential area (1)
- Resuscitation (1)
- Reversing (veh) (1)
- Rib (1)
- Richtlinie (1)
- Risikoverhalten (1)
- Road (1)
- Road transport (1)
- Robot (1)
- Roboter (1)
- Roll over (veh) (1)
- Roof (veh) (1)
- Rotation (1)
- Roundabout (1)
- Rsk (1)
- Run off (1)
- Rupture (1)
- Röntgenstrahlung (1)
- Rücken (1)
- Rücksichtslosigkeit (1)
- Rückwärtsfahren (1)
- Safety glass (1)
- Safety harness (1)
- Safety system (1)
- Saftey (1)
- Salpetersäure (1)
- Sample (stat) (1)
- Sauerstoff (1)
- Schadstoff (1)
- Schicht (1)
- Schienentransport (1)
- Schienenverkehr (1)
- Schlag (1)
- Schleudertrauma (1)
- Schnittstelle (1)
- Schutz (1)
- Schwangerschaft (1)
- Schweiz (1)
- Schweregrad (UNfall (1)
- Schwermetall (1)
- Schätzung (1)
- Sealing compound (1)
- Seat (1)
- Seat belt (1)
- Seat harness (1)
- Sensitivity (1)
- Service life (1)
- Settlement (1)
- Setzung (1)
- Severity (accid, injuy) (1)
- Sicherheitsglas (1)
- Sicherheitspolsterung (1)
- Significance (1)
- Signifikanz (1)
- Social factors (1)
- Soziale Faktoren (1)
- Speed limit (1)
- Speed) (1)
- Spinal calum (1)
- Spreading (1)
- Sri Lanka (1)
- Stadt (1)
- Stadtplanung (1)
- Stahl (1)
- Stand der Technik (Bericht) (1)
- Standard test run (1)
- Standardabweichung (1)
- Stat) (1)
- State of the art report (1)
- Statistik (math) (1)
- Steel (1)
- Stichprobe (1)
- Stochastic process (1)
- Stochastischer Prozess (1)
- Stopping distance (1)
- Straight ahead (traffic) (1)
- Strasse (1)
- Straßentransport (1)
- Stress (psychol) (1)
- Störfallmanagement (1)
- Subsoil (1)
- Surface (1)
- Switzerland (1)
- Systemanalyse (1)
- Systems analysis (1)
- Tag (24 Stunden) (1)
- Technische Vorschriften (1)
- Temporary (1)
- Tension (1)
- Test procedure (1)
- Thailand (1)
- Ton (Gestein) (1)
- Torf (1)
- Town planning (1)
- Toxicity (1)
- Toxizität (1)
- Traffic lane (1)
- Tragbar (1)
- Tragfähigkeit (1)
- Transparent (1)
- Transport mode (1)
- Transport operator (1)
- Transportunternehmen (1)
- Traveler (1)
- Treibhauseffekt (1)
- Two dimensional (1)
- Tyre (1)
- Tyre tread (1)
- Tätigkeitsbericht (1)
- Umwelt (1)
- Umweltschutz (1)
- Underride prevention (1)
- Unfallfolgephase (1)
- Unfallneigung (1)
- Unfallrate (1)
- Unfallrekonsruktion (1)
- Unfallschwerpunkt (1)
- Unfallverhütug (1)
- Ungeschützter Verkehrsteilnehmer (1)
- United Kindom (1)
- Unterfahrschutz (1)
- Untergrund (1)
- Untersuchung am Umfallort (1)
- Urban area (1)
- Usa (1)
- Value analysis (1)
- Variance analysis (1)
- Varianzanalyse (1)
- Vegetation (1)
- Vehicle mile (1)
- Vehicle restraint system (1)
- Vehicle safety device (1)
- Veletzung) (1)
- Vereinigtes Königreichl (1)
- Verfahen (1)
- Verfahren ; Verkehrsinfrastruktur (1)
- Verkehrsmittel (1)
- Verkehrsnetz (1)
- Verkehrsqualität (1)
- Verkehrsverflechtung (1)
- Vermeidung (1)
- Verständnis (1)
- Verteilung (allg) (1)
- Verteilung (mater) (1)
- Verwaltung (1)
- Virtual reality (1)
- Virtuelle Realität (1)
- Visualisation (1)
- Visualisierung (1)
- Vorbelastung (Boden) (1)
- Vulnerable road user (1)
- Wahrnehmung (1)
- Wasser (1)
- Water (1)
- Whiplash injury (1)
- Window (veh) (1)
- Wirkungsanalyse (1)
- Wohngebiet (1)
- Women (1)
- Working group (1)
- Zahl (1)
- Zerstörungsfreie Prüfung (1)
- Zug (mech) (1)
- Zusammendrückung (1)
- Zusammenstoss (1)
- Zustandsbewertung (1)
- Zweidimensional (1)
- accident (1)
- aktives Sicherheitssystem (1)
- analyses (math) (1)
- ar (1)
- efficiency (1)
- fatality (1)
- finite element method (1)
- head (1)
- road) (1)
- simulation (1)
- stat] (1)
- tödlicher Unfall (1)
- Überdeckung (1)
- Überschwemmung (1)
Institut
- Sonstige (337) (entfernen)
The advent of active safety systems calls for the development of appropriate testing methods. These methods aim to assess the effectivity of active safety systems based on criteria such as their capability to avoid accidents or lower impact speeds and thus mitigate the injury severity. For prospective effectivity studies, simulation becomes an important tool that needs valid models not only to simulate driving dynamics and safety systems, but also to resolve the collision mechanics. This paper presents an impact model which is based on solving momentum conservation equations and uses it in an effectivity study of a generic collision mitigation system in reconstructed real accidents at junctions. The model assumes an infinitely short crash duration and computes output parameters such as post-crash velocities, delta-v, force directions, etc. and is applicable for all impact collision configurations such as oblique, excentric collisions. Requiring only very little computational effort, the model is especially useful for effectivity studies where large numbers of simulations are necessary. Validation of the model is done by comparison with results from the widely used reconstruction software PC-Crash. Vehicles involved in the accidents are virtually equipped with a collision mitigation system for junctions using the software X-RATE, and the simulations (referred to as system simulations) are started sufficiently early before the collision occurred. In order to assess the effectivity, the real accident (referred to as baseline) is compared with the system simulations by computing the reduction of the impact speeds and delta-v.
A flexible pedestrian legform impactor (FlexPLI) with biofidelic characteristics is aimed to be implemented within global legislation on pedestrian protection. Therefore, it is being evaluated by a technical evaluation group (Flex-TEG) of GRSP with respect to its biofidelity, robustness, durability, usability and protection level (Zander, 2008). Previous studies at the Federal Highway Research Institute (BASt) and other laboratories already showed good progress concerning the general development, but also the need for further improvement and further research in various areas. An overview is provided of the different levels of development and all kinds of evaluation activities of the Flex-TEG, starting with the Polar II full scale pedestrian dummy as its origin and ending up with the latest legform impactor built level GTR that is expected to be finalized by the end of the year 2009. Using the latest built levels as a basis, gaps are revealed that should be closed by future developments, like the usage of an upper body mass (UBM), the validation of the femur loads, injury risk functions for the cruciate knee ligaments and an appropriate certification method. A recent study on an additional upper body mass being applied for the first time to the Flex-GT is used as means of validation of recently proposed modified impact conditions. Therefore, two test series on a modern vehicle front using an impactor with and without upper body mass are compared. A test series with the Flex-GTR will be used to study both the comparability of the impact behavior of the GT and GTR built level as well as the consistency of test results. Recommendations for implementation within legislation on pedestrian protection are made.
Many safety-relevant tasks in control or diagnostics require binary choices such as "conflict versus separation" in air traffic control, "normal versus pathological" when interpreting x-ray pictures, or "permitted versus forbidden" when inspecting airport security scans. Deciders often are uncertain, but nevertheless required to decide between two alternatives, that is, they have not only to decide upon an action, but also about the admissible level of uncertainty. If the accepted level of judgment certainty is not taken into account, the sequence of decisions does not capture the full picture of the underlying decision process. Differences in judgment certainty are relevant, because they reflect not only the adequacy of the human-machine interface that is evaluated, but also the differences in expertise of the decider and the requirements of the actual situation or task. Therefore, capturing both judgment certainty and discrimination performance is essential. A comparison of different human-machine-interfaces (for air traffic control) is used to illustrate a methodological approach, which allows for integrated analyses of decision processes based on receiver-operator-characteristics and practical guidelines for the evaluation of human-machine-interfaces for safety-relevant operation procedures are provided.
This paper will outline ETSC's contribution to the European Union's road safety policy 2011-2020. It will present some of the main recommendations from ETSC's Blueprint for the 4th Road Safety Action Programme and will introduce the response to the European Commission's Road Safety Policy Orientations 2011-2020 (published July 2010). The second framework document presented is the Transport White Paper (published March 2011). The paper will focus on new targets and the new vision set for Europe's Road Safety policy picking out some issues in particular such as traffic law enforcement and the protection of vulnerable road users. It will argue that by reinforcing the current Road Safety Policy Orientations, the EU will be better placed to reach its new ambitious goal of halving road deaths by 2020 and the longer term zero casualty vision.
In line with the new definition introduced by the European Commission (EC), the number of seriously injured road casualties in Germany for 2014 is assessed in this study. The number of MAIS3+ casualties is estimated by two different methodological approaches. The first approach is based on data from the German Inâ€Depth Accident Study (GIDAS), which is closely related to the German Road Traffic Accident Statistics. The second approach is based on data from the German TraumaRegister DGU-® (TRâ€DGU), which includes many more hospitals but not all MAIS3+ injuries.
Estimation of the benefits for the UK for potential options to modify UNECE Regulation No. 95
(2010)
The side impact problem in Europe remains substantial. UK data shows that between 22% and 26% of car occupant casualties are involved in a side impact, but this rises to between 29% and 38% for those who are fatally injured. This indicates the more injurious nature of side impacts compared with frontal impacts. The European Enhanced Vehicle safety Committee (EEVC) has performed work to address the side impact issue since 1979. As part of its continuing work, it has recently investigated potential options for regulatory changes to improve side impact protection in cars further. To support this work the UK undertook an analysis to estimate the benefit for potential options to modify UNECE Regulation 95. The analysis used the UK national STATS19 and detailed Co-operative Crash Injury Study (CCIS) accident databases. Of the potential options reviewed, it was found that the addition of a pole test offered the greatest benefit.
Although the number of road accident casualties in Europe (EU27) is falling the problem still remains substantial. In 2011 there were still over 30,000 road accident fatalities. Approximately half of these were car occupants and about 60 percent of these occurred in frontal impacts. The next stage to improve a car's safety performance in frontal impacts is to improve its compatibility. The objective of the FIMCAR FP7 EU-project was to develop an assessment approach suitable for regulatory application to control a car's frontal impact and compatibility crash performance and perform an associated cost benefit analysis for its implementation. This paper reports the cost benefit analyses performed to estimate the effect of the following potential changes to the frontal impact regulation: • Option 1 " No change and allow current measures to propagate throughout the vehicle fleet. • Option 2 " Add a full width test to the current offset Deformable Barrier (ODB) test. • Option 3 " Add a full width test and replace the current ODB test with a Progressive Deformable Barrier (PDB) test. For the analyses national data were used from Great Britain (STATS 19) and from Germany (German Federal Statistical Office). In addition in-depth real word crash data were used from CCIS (Great Britain) and GIDAS (Germany). To estimate the benefit a generalised linear model, an injury reduction model and a matched pairs modelling approach were applied. The benefits were estimated to be: for Option 1 "No change" about 2.0%; for Option 2 "FW test" ranging from 5 to 12% and for Option 3 "FW and PDB tests" 9 to 14% of car occupant killed and seriously injured casualties.
Although the annual traffic accident statistics published by the national police is available in public, the detailed traffic accident data has not been released in Korea. Recently the Ministry of Land, Infrastructure and Transport recognized the importance of in-depth accident data to enhance road traffic safety and initiated a research project to establish a collection of the detailed accident data. The main objective of the project is a feasibility study to establish KIDAS (Korea In-Depth Accident Study). Within this project, three university hospitals which are located in mid-size cities have been selected to collect accident data. Annually, more than 500 cases of accidents have been collected from the in-patient's interviews and diagnosis. Unlike GIDAS (German In-Depth Accident Study), currently on-site investigation can"t be performed by the Korean police. The only available data is patient medical records, patient's description of accident circumstances and the damaged vehicle. Occasionally the police provide the accident investigation reports containing very brief information on accident causation and vehicle safety. In a first step, the concept of KIDAS is to adopt the format of iGLAD (Initiative for the Global Harmonization of Accident Data) for harmonization. Since the currently collected accident information is extremely limited compared with GIDAS, the other sources of data and calculations such as KNCAP vehicle data, pc-crash simulations, vehicle registration information, insurance company data are utilized to complete the iGLAD template. Results from KIDAS_iGLAD and the cases of assessment of active safety devices such as AEBS, ESC, and LDWS will be evaluated.
The need for improved EU level accident information and data was identified in the EU White Paper on Transport Policy (2001)1 and detailed in the Road Safety Action Plan (2003)2. The plan specifies that the EC will develop a road safety observatory to coordinate data collection within an integrated framework.
A change emerges in hospital landscape due to health political measures, which in consequence also influences the pre-clinical medical care of emergencies. The main focus of this study was to gather information about emergency medical care after traffic accidents on the basis of data of Bavarian emergency medical services. In Bavaria, in 2006 it was necessary to call an emergency doctor in the case of 14.261 traffic accidents. Predominantly the patients were provided by land-based life saving appliances, air rescue services were only applied in 19.1 % of the cases. 47.6 % of patients being involved in a traffic accident were transported into a primary health care hospital. A prehospital interval of more than 60 minutes was calculated in 20 % of emergency care. 96.2 % of the patients were transported to hospitals of tertiary or maximum supply by air rescue services. The life saving appliances" readiness for action is however restricted to daylight. A further limitation appeared for routine office hours in hospitals: Only 36.7 % of accidents occurred in this time frame. An increase of hospitalizations in clinics of maximum supply appeared from 2002 until 2006 while simultaneously the prehospital period was extended. To assure a sufficient medical care of seriously injured persons further on, a fulltime and area-wide expostulation of efficient facilities is necessary. For this purpose it is necessary to establish regional trauma networks as well as emergency medical service at night time. Beyond that, a cost efficient compensation of the structural, personnel and logistic expenses has to be assured.
Research to inform policy is often challenged with how to genuinely use and implement research findings in decision-making and policy-planning. To begin with, the dialogue between researchers and decision-makers is essential to ensure profound understanding and legitimate interpretations of the results. Furthermore, the step to drawing practical conclusions and processing them into actions can only succeed if research findings are diffused to decision-making levels with influence on the matter, and mechanisms to knowledge transfer in the presence of a stable, favourable policy environment exist. Research investments into the topic of electromobility in Europe are substantial, and subtopics aiming to inform national policy-makers address a complex set of aspects from environmental and societal to technological and economic. This paper has a two-fold objective, the first of which is to present the results of scenarios to explore electromobility deployment in Finland, Germany and the European Union. The second is to discuss the challenges and solutions to bridge the gap from research findings towards decision-making and policy-planning, using the authors' electromobility scenario work as an example. The electromobility scenarios were built using the VECTOR21 model (Mock, 2010), and the rationale was to simulate vehicle sales and markets under different policy settings and calculate the most economical solution to fulfill regulation on COâ‚‚ emissions as set by the European Commission (2009). The model allows calculating the market diffusion of alternative powertrain technologies to the European market until 2030, taking into account different taxation schemes, incentives and other country-specific characteristics. The authors also present the cost-benefit-analysis of the modelling results to assess the different scenarios and to show variation between regions regarding profitability of alternative technological or political support and interventions. To proceed from research findings towards decision-making and policy-planning, the authors made observations relating to transfer of research knowledge and interpretation of their electromobility scenario results in national policy contexts. An evaluation of how the function of research to inform policy in this case succeeded is provided. In addition, the influence of expert opinions on the political decision-making process will be discussed through experiences from an expert questionnaire conducted to survey the importance of costs, time requirement, acceptance and other criteria of promotion measures of electromobility.
Mechanical properties of tibial bone at compressive strain rates of 50-200 s-1 are obtained through Split Hopkinson pressure bar. Cylindrical specimens of 12-15 mm diameter and 2-5 mm thickness were used. The Young- moduli are calculated from linear portion of stress-strain curves. For both cortical and cancellous part of the bones, the Young- modulus was found to increase with the increasing strain rates. Also for both cancellous and cortical bones the Young- modulus increases consistently with increase in densities.
Twenty-eight percent of traffic accidents in Japan are rear-end collisions, and of these, 13% are multiple collisions (three or more vehicles and/or roadside objects). A post-crash braking system enables the driver to stop the vehicle in a short distance after a rear-end collision to prevent secondary collisions. In this study, the effectiveness of a post-crash braking system was examined using a drive recorder database. In 64% of rear-end collisions, the driver's braking was interrupted after the collision. The stopping distance was estimated with time data from the drive recorder. We predict that the brake assist would be effective in preventing secondary collisions in 21% of cases.
Chronic non-cancer pain (CNCP) is a major health problem. Patients are increasingly treated with chronic opioid therapy (COT). Several laboratory studies have demonstrated that long-term use of opioids does not generally impair driving related skills. But there is still a lack of studies investigating on-the-road driving performance in actual traffic. The present study assessed the impact of COT on road-tracking and car-following performance in CNCP patients. Twenty CNCP patients, long-term treated with stable doses of opioid analgesics, and 19 healthy controls conducted standardized on-the-road driving tests in normal traffic. Performance of controls with a blood alcohol concentration (BAC) of 0.5 g/L was used as a reference to define clinically relevant changes in driving performance. Standard Deviation of Lateral Position (SDLP), a measure of road-tracking control, was 2.57 cm greater in CNCP patients than in sober controls. This difference failed to reach statistical significance in a superiority test. Equivalence testing indicated that the 95% CI around the mean SDLP change was equivalent to the SDLP change seen in controls with a BAC of 0.5 g/L and did not include zero. When corrected for age differences between groups the 95% CI widened to include both the alcohol reference criterion and zero. No difference was found in car-following performance. Driving performance of CNCP patients did not significantly differ from that of controls due to large inter-individual variations. Hence in clinical practice determination of fitness to drive of CNCP patients who receive opioid treatments should be based on an individual assessment.
SEEKING is looking for answers regarding electric powered bicycles and their relation to traffic safety issues. Does a cyclist need "E"? Is it as risky as riding a moped or are E-bikes creating conflicts with other cyclists? The project described herein, funded by the Austrian Ministry of Transport, has the aim of seeking answers to these hot topics. The SEEKING-team shows an in-depth investigation of vehicle dynamic sensing, together with subjective feedback of test riders to detect similarities and differences between conventional cycling and E-biking. Following an overview on the international status quo, measurement runs and their analyses are performed to find a set of preventative measures to make (E-)biking safer. A specific focus is the detection of curve handling, stopping and acceleration phases as well as conflict studies on course-based test rides and "real world" tests on cycling paths (naturalistic riding).
Driver distraction
(2017)
This report for the Institute of Advanced Motorists (IAM) summarises recent research and knowledge from scientific studies about distracted driving. The report defines what it means to be "distracted" when driving, discusses the impact of distraction on driver behaviour and safety, and what can be done to reduce distracted driving. The focus of distraction discussed here relates to how drivers engage with technology when driving. The report begins with a background to driver distraction, followed by discussion about what is actually meant by driver distraction. It is then considered why humans cannot successfully do two things at the same time, particularly within the context of driving. The subsequent section summarises the scientific research findings to date with regard to driver distraction and technology, and how this affects different types of road user. Recommendations for how driver distraction can be mitigated in the real world and a summary conclude the report. Responses to common questions raised by drivers are presented in Appendix A.
Do learner gain sufficient braking capabilities at the end of education for collision avoidance?
(2013)
The paper describes a test design to evaluate the braking behaviour in the course of the driver education. The results show that the braking capabilities increased during the driver education and the learning effects are the same for males and females. The evaluation limit is set to 6 m/s-². At the beginning of education, 50% of the drivers do not reach this limit, although the driver education car is equipped with an emergency brake assist, which is regularly installed in all vehicles since 2009. After the education, 100% of the drivers can reach the limit. The results are mapped to a collision avoidance scenario.
The study aimed at estimating the impact of pedelecs (with an assumed higher speed than bicycles) on the traffic accident severity in Germany for different penetration rates. The analysis shows that in many real situations (68%) an electrical support of bicycles has no influence on the sequence of accident events. Taking into account a number of unreported "single bicycle accidents", the adoption of similar traffic behavior and similar age distribution, the authors determined a shift of 400 former slightly to seriously injured cyclists in Germany per year. Overall this would be an increase of approximately 2.3% in case of 10% of pedelec penetration with the pessimistic assumption of 10 km/h speed increase although first natural driving studies predict a much lower average speed increase of pedelecs. The hypothesis verbalized in the initial question whether a higher distribution of pedelecs will result in more severe accidents in Germany is not verified. The study shows that electrical support didn"t result in higher collision speed in general. In many accident situations, the speed of pedelecs has only a minor influence on the accident severity. Further research focusing on a possible change of driver behavior especially in new target groups (elderly people) will be needed.
Since its beginning in 1999, the German In-Depth Accident Study (GIDAS) evolved into the presumably leading representative road traffic accident investigation in Europe, based on the work started in Hanover in 1973. The detailed and comprehensive description of traffic accidents forms an essential basis for vehicle safety research. Due to the ongoing extension of demands of researchers, there is a continuous progress in the techniques and systematic of accident investigation within GIDAS. This paper presents some of the most important developments over the last years. Primary vehicle safety systems are expected to have a significant and increasing influence on reducing accidents. GIDAS therefore began to include and collect active safety parameters as new variables from the year 2005 onwards. This will facilitate to assess the impact of present and future active safety measures. A new system to analyse causation factors of traffic accidents, called ACASS, was implemented in GIDAS in the year 2008. The whole process of data handling was optimised. Since 2005 the on-scene data acquisition is completely conducted with mobile tablet PCs. Comprehensive plausibility checks assure a high data quality. Multi-language codebooks are automatically generated from the database structure itself and interfaces ensure the connection to various database management systems. Members of the consortium can download database and codebook, and synchronize half a terabyte of photographic documentation through a secured online access. With the introduction of the AIS 2005 in the year 2006, some medical categorizations have been revised. To ensure the correct assignment of AIS codes to specific injuries an application based on a diagnostic dictionary was developed. Furthermore a coding tool for the AO classification was introduced. All these enhancements enable GIDAS to be up to date for future research questions.
Trauma management (TM) covers two types of medical treatment: the initial one provided by Emergency Medical Services (EMS) and a further one provided by permanent medical facilities. There is a consensus in the professional literature that to reduce the severity and the number of road crash victims, the TM system should provide rapid and adequate initial care of injury, combined with sufficient further treatment at a hospital or trauma centre. Recognizing the important role of TM for reducing road crash injury outcome, it was decided, within the EU funded SafetyNet project, to develop road safety performance indicators (SPIs) which would characterize the level of TM systems" performance in European countries and enable country comparisons. The concept of TM SPIs was developed based on a literature study of performance indicators in TM, a survey of available practices in Europe and data availability examinations. A set of TM SPIs was introduced including 14 indicators which characterize five issues such as: availability of EMS stations; availability and composition of EMS medical staff; availability and composition of EMS transportation units; characteristics of the EMS response time, and availability of trauma beds in permanent medical facilities. Basic information on the TM systems was collected in close cooperation with the national expert group. A dataset with TM SPIs for 21 countries was created. It was demonstrated that the countries can be compared using selected TM SPIs. Moreover, a more general comparison of the TM systems' performance in the countries is possible, using multiple ranking and statistical weighting techniques. By both methods, final estimates were received enabling the recognition of groups of countries with similar levels of the TM system's performance. The results of various trials were consistent as to the recognition of countries with high or low level of the TM systems" performance, where in grouping countries with intermediate levels of the TM system's performance some differences were observed. The SafetyNet project's practice demonstrated that data collection for estimating TM SPIs is not an easy task but is realizable for the majority of countries. The TM SPIs" message is currently limited to the availability of trauma care services. Further development of the TM SPIs should focus on characteristics of actual treatment supplied, based on combined police and medical road crash related databases.
In Germany road tunnels on major roads which are longer than 400 m have to be monitored permanently. For that purpose the tunnels are equipped with a multitude of monitoring and detection systems whose data and messages are transmitted to tunnel control centres. Due to the higher traffic density, the increasing number of tunnels to be monitored and road users" demand of higher safety and security levels, the strains on operating staff of tunnel control centres have continuously been growing. Therefore, innovative approaches have been developed in two recent German research projects: RETISS " Real Time Security Management System, and ESIMAS " Real-time Safety Management System for road Tunnels. Both systems are designed to allow faster and more efficient reaction of tunnel operators in order to maintain the capacity and availability of transport infrastructures but also to improve the safety and security of road users.
The goal of the project FIMCAR (Frontal Impact and Compatibility Assessment Research) was to define an integrated set of test procedures and associated metrics to assess a vehicle's frontal impact protection, which includes self- and partner-protection. For the development of the set, two different full-width tests (full-width deformable barrier [FWDB] test, full-width rigid barrier test) and three different offset tests (offset deformable barrier [ODB] test, progressive deformable barrier [PDB] test, moveable deformable barrier with the PDB barrier face [MPDB] test) have been investigated. Different compatibility assessment procedures were analysed and metrics for assessing structural interaction (structural alignment, vertical and horizontal load spreading) as well as several promising metrics for the PDB/MPDB barrier were developed. The final assessment approach consists of a combination of the most suitable full-width and offset tests. For the full-width test (FWDB), a metric was developed to address structural alignment based on load cell wall information in the first 40 ms of the test. For the offset test (ODB), the existing ECE R94 was chosen. Within the paper, an overview of the final assessment approach for the frontal impact test procedures and their development is given.
The SafetyNet project was formulated in part to address the need for safety oriented European road accident data. One of the main tasks included within the project was the development of a methodology for better understanding of accident causation together with the development of an associated database involving data obtained from on-scene or "nearly onscene" accident investigations. Information from these investigations was complemented by data from follow-up interviews with crash participants to determine critical events and contributory factors to the accident occurrence. A method for classification of accident contributing factors, known as DREAM 3.0, was developed and tested in conjunction with the SafetyNet activities. Collection of data and case analysis for some 1 000 individual crashes have recently been completed and inserted into the database and therefore aggregation analyses of the data are now being undertaken. This paper describes the methodology development, an overview of the database and the initial aggregation analyses.
When the EEVC proposed the full-scale side impact test procedure, it recommended that consideration should be given to an interior headform test in addition. This was to evaluate areas of contact not assessed by the dummy. EEVC Working Group 13 has been researching the parameters of a possible European headform test procedure in four phases. Earlier stages of the research have been presented at previous ESV conferences. The conclusions from these have suggested that the US free motion headform should be used in any European test procedure and that it should be a free flight test, not guided. This research has now culminated in proposals for a European test procedure. This paper presents the proposed EEVC side impact interior headform test procedure, giving the rationale for the test and the first results from the validation phase of the test protocol.
At the 2005 ESV conference, the International Harmonisation of Research Activities (IHRA) side impact working group proposed a 4 part draft test procedure, to form the basis of harmonisation of regulation world-wide and to help advances in car occupant protection. This paper presents the work performed by a European Commission 6th framework project, called APROSYS, an further development and evaluation of the proposed procedure from a European perspective. The 4 parts of the proposed procedure are: - A Mobile Deformable Barrier test; - An oblique Pole side impact test; - Interior headform tests; - Side Out of Position (OOP) tests. Full scale test and modelling work to develop the Advanced European Mobile Deformable Barrier (AE-MDB) further is described, resulting in a recommendation to revise the barrier face to include a bumper beam element. An evaluation of oblique and perpendicular pole tests was made from tests and numerical simulations using ES-2 and WorldSID 50th percentile dummies. It was concluded that an oblique pole test is feasible but that a perpendicular test would be preferable for Europe. The interior headform test protocol was evaluated to assess its repeatability and reproducibility and to solve issues such as the head impact angle and limitation zones. Recommendations for updates to the test protocol are made. Out-of-position (OOP) tests applicable for the European situation were performed, which included additional tests with Child Restraint Systems (CRS) which use is mandatory in Europe. It was concluded that the proposed IHRA OOP tests do cover the worst case situations, but the current test protocol is not ready for regulatory use.
The Decision Support System (DSS) is one of the key objectives of the European co-funded research project SafetyCube in order to better support evidence-based policy making. Results will be assembled in the form of a DSS that will present for each suggested road safety measure: details of risk factor tackled, measure, best estimate of casualty reduction effectiveness, cost-benefit evaluation and analytic background. The development of the DSS presents a great potential to further support decision making at local, regional, national and international level, aiming to fill in the current gap of comparable measures effectiveness evaluation. In order to provide policy-makers and industry with comprehensive and well-structured information about measures, it is essential that a systems approach is used to ensure the links between risk factors and all relevant safety measures are made fully visible. The DSS is intended to become a major source of information for industry, policy-makers and the wider road safety community.
The Powered Two Wheelers (PTWs) accidents constitute one of the road safety targets in Europe. PTWs users' fatalities represent 15% of EU road fatalities, having increased the last few years, which is quite opposite than other road users casualties. To reduce PTW accidents is necessary to know which the accident causations are from different points of view (human factor, vehicle characteristics, environment, type of accident, situation, etc.). In TRACE project ("Traffic Accident Causation in Europe", under the European Commission 6th Framework Program, 2006-2008,) a specific task was focused on PTW users point of view, analyzing extensive databases to locate the main accident configurations (type of accident, severity, frequency), and an in-depth database to obtain the causation factors, the risk factors for each configuration founded in the extensive databases analysis and the variables associated to each causation factor in the PTW configurations.
Detailed investigations and reconstructions of real accidents involving vulnerable road users
(2005)
The aim of this research is to improve knowledge about vulnerable road users accidents and more specifically pedestrians or cyclists. This work has been based on a complete analysis of real accidents. From accidents chosen from an in-depth multidisciplinary investigation (psychology, technical, medical), we have tried to identify the configuration of the impact: car speed, pedestrian or cyclist orientations. Then, we have made a numerical modelling of the same configuration with a multibody software. In particular, we have reproduced the anthropometry of the victim and the front shape of the car. A first simulation has been performed on this starting configuration. Next, effects of some parameters such as car velocity or victim position at impact have been numerically studied in order to find the best correlations with all indications produced by the in-depth analysis. Finally, the retained configuration was close to the presumed real accident conditions because it reproduces in particular the same impact points on the car, the same injuries, and is according to the driver statement. This double approach associating an in-depth accident analysis and a numerical simulation has been applied on pedestrian-to-car and bicyclist-tocar accidents. It has allowed us to better understand the real kinematics of such impacts. Even if this method is based on a case to case study, it underlines which parameters are relevant on a vulnerable road user accident investigation and reconstruction.
The need of passive safety devices, able to reduce the accidents and the severity of injuries suffered by motorcyclist, distinctly arises from data on accident statistics. In this paper, the effectiveness of an airbag device fitted in the biker- garments has been verified through various numerical simulations. Two simple test conditions were defined, in order to investigate the performance of the device both for back and front impacts, and simulated at various impact speeds. With the aim of providing more information about the actual capability of the airbag to reduce the severity of the injuries, one of accident scenario described by ISO 13232:2005 has been also investigated, checking the real effectiveness of the airbag strap-based firing system too. Confrontation of injury indexes resulting from simulation with and without airbag made possible a realistic evaluation of the harm reduction induced by the airbag presence.
Within the COST Action TU1101 the working group WG 1 is dealing with acceptance criteria and problems in helmet use while bicycling concerning conspicuity, thermal stress, ventilation deficits and other potential confounding. To analyze the helmet usage practice of bicyclists in Europe a questionnaire was developed in the scope of working group 1 to collect relevant information by means of a field study. The questionnaire consists of some 66 questions covering the fields of personal data of the cyclist, riding und helmet usage habits, information concerning the helmet model and the sensation of the helmet, as well as information on previous bicycle accidents. A second complementary study is conducted to analyze if the use of a bicycle helmet influences the seating geometry and the posture of cyclists when riding a bicycle and if the if the helmet vertically limits the vision. For this purpose cyclists with and without helmets were photographed in real world situations and relevant geometrical values such as the decline of the torso, the head posture of the upper vertical vision limit due to the helmet were established from the photos. The interim results of the field studies which were conducted in Germany by the Hannover Medical School are presented in this study. Some 227 questionnaires were filled out, of which 67 participants had used a helmet and 42 of the 227 participants have had a bicycle accident before. For the analysis of the riding position and posture of the cyclist over 40 pictures of riders with a helmet and over 240 pictures of riders without a helmet were measured concerning the seating geometry to describe the influence of using a bicycle helmet. Some results in summary: From the riders interviewed with the questionnaire only 11% of the city bike riders and 12% of the mountain bike riders always used the helmet, while 38% of the racing bike riders and 88% of the e-bike-riders always used the helmet. The helmet use seems not to change the sensation of safety of cycling compared to the use of a car. The arguments for not wearing a helmet are mostly stated to be the short distance of a trip, high temperatures or carelessness and waste of time. The reasons for using a helmet are stated to be the feeling of safety and being used to using a helmet. Being a role model for others was also stated to be a reason for helmet use. Concerning the sensation of the helmet 9% of the riders reported problems with the field of vision when using a helmet, 57% saw the problem of sweating too much, and 10% reported headaches or other unpleasant symptoms like pressure on the forehead when using the helmet. The analysis of the seating posture from the pictures taken of cyclists revealed that older cyclists generally have a riding position where the handle bar is higher than the seat (0-° to 10-° incline from seat to handlebar), while younger riders had a higher variance (between -10-° decline and 20-° incline). Further, elderly riders and riders with helmets seem to have a more upright position of the upper body when cycling. The vertical vision limit due to the helmet is determined by the front rim of the helmet (mostly the sun shade). Typical values here range from 0-° (horizontal line from the eye to the sun shade) to 75-° upwards, in which elderly riders tend to have a slightly higher vertical vision limit possibly due to the helmet being worn more towards the face.
Although the statistics show a decreasing rate of child injuries and fatalities in German road accidents more efforts can be made to protect children in cars e.g. by developing appropriate child restraint systems. An important part in of this work can be achieved with the help of crash tests using child dummies. However these crash tests cannot completely reflect the situation of real world crashes as factors like children moving out of the optimal position or children incorrectly fastened by their parents are difficult to predict. Therefore this study gives an overview over the current accident and injury situation of child occupants in cars in German road accidents.
The incidence of side impacts was investigated from GIDAS data. Both vehicle-fixed object and vehicle-vehicle collisions were analysed as these are enclosed within the consumer testing program. Vehicle-fixed object collisions were stratified according to ESC availability. Results indicated that vehicles equipped with ESC rarely have pure-lateral impacts. An increase in oblique collisions was seen for the vehicles with ESC whereby most vehicle were driving in left curves. The analysis of vehicle-vehicle collisions developed injury risk curves were developed at the AIS3+ injury severity for the vehicle-vehicle side impacts. Results suggested that greatest injury risk occurred when a Pre Euro NCAP vehicle was struck by a Post Euro-NCAP vehicle. The remaining curves did not show different behaviour, indicating that stiffness increased have been equally combated. This was attributable to the few Post Euro-NCAP vehicles that had a deployed curtain airbag available in the sample. The integration of Euro NCAP testing has shown to improve vehicle crashworthiness for pole collisions, as those vehicles with ESC rarely incur lateral impacts.
The price of a new car increased almost every year for a long period. In recent years however, the budget available to most people for purchasing a car either did not grow or became even smaller. Therefore it was in the interest of some OEMs to offer economical car models in the so-called "8,000- Euro class". Here an important question arose regarding the safety of these vehicles. There is no question that the very high safety level of cars reached in Europe during the last decades should not be sacrificed as a consequence of smaller budgets. Customers with sense of responsibility have the right to be properly informed about the balance between safety and price so that they can make a deliberate decision when buying either a new or a used car. Against this background, the German magazine "AutoBILD" commissioned DEKRA to conduct fullscale frontal crash tests with a view to publishing the results. These tests have been carried out in accordance with the corresponding Euro NCAP crash test requirements and performance criteria. The tested vehicles were two new Logans produced by the manufacturer Dacia, two used cars of the type VW Golf IV (registration date 2000) and one new VW Fox. This paper describes the safety features of the vehicles and the results of the five crash tests to demonstrate state-of-the-art safety levels and what levels may be expected from vehicles in the "8,000- Euro class". Looking at real-world crashes it is of interest to think about future trends in a more detailed manner. Therefore it will be more and more necessary to supplement the federal statistics with more detailed in-depth information about the consequences of accidents and the safety performance of crashed vehicles.
The utilisation of secondary-safety systems to protect occupants has attained a very high level over the past decades. Further improvements are still possible, but increasingly minor progress is only to be had with a high degree of effort. Thus, a key aspect must be the impact to overall safety in an accident. If reliable information is available on an imminent crash, measures already taken in the pre-crash phase can result in a significantly great influence on the outcomes of the crash. With this background preventive measures are the key to a sustainable further reduction of the figures of crash victims on our roads. This paper aims to show a preventive approach that can contribute to lessening the consequences of a crash by creating an optimum interaction of measures in the fields of primary and secondary safety. To further enhance vehicle safety, driver assistant systems are already available that warn the driver of an imminent front-to-rear-end crash. The next step is to support him in his reactions or if he fails to react sufficiently, to even initiate an automatic braking when the crash becomes unavoidable. Automatic pre-crash braking can, in an ideal situation, fully prevent a crash or can significantly reduce the impact speed and thus the impact energy (and the severity of the accident). If a vehicle is being braked in the pre-crash phase, the occupants are already being pre-stressed by the deceleration. The information available about the imminent crash can be used to activate the belt tensioners and likewise other secondary safety systems in the vehicle right before the impact. The pre-crash deceleration also causes the front of the vehicle to dip. Conventional crash tests do not take this specific impact situation into consideration. This is why, for example, the influences of the pre-crash displacements of the occupants are not recorded in the test results. Furthermore, a reproducible representation of the benefit of the vehicle safety systems which prepare the occupants for the imminent impact is not possible. In order to demonstrate the functions of automated pre-crash braking and to investigate the differences during the impact as a consequence of the altered occupant positions as well as the initiation of force and deformations of the vehicle front, DEKRA teamed up with BMW to carry out a joint crash test with the latest BMW 5 series vehicle. It involved the vehicle braking automatically from a starting test speed of 64 km/h (corresponding to the impact speed set by Euro NCAP) down to 40 km/h. The test was still run by the intelligent drive system of the crash test facility. This required several modifications to be made to the test facility as well as to the vehicle. The paper will describe and discuss some relevant results of the crash test. In addition, the possible benefits of such systems will also be considered. The test supplemented the work of the vFSS working group (vFSS stands advanced Forward-looking Safety Systems).
Crash involvement studies using routine accident and exposure data : a case for case-control designs
(2009)
Fortunately, accident involvement is a rare event: the chance of an individual road user trip to end up in a crash is close to zero. Thus, according to general epidemiological principles one can expect the case-control study design to be especially suitable for quantifying the relative risk (odds ratio) of accident involvement of road users with a certain risk factor as compared to road users that do not have this characteristic. Ideally, of course, the database for such a case-control study should be established by drawing two independent random samples of cases (accidental units) and controls (nonaccidental units), respectively. If, however, special data collection is not an option, it is nevertheless possible to analyze routine accident and exposure data under a case-control design in order to fully exploit the information contained in already existing databases. As a prerequisite, accident and exposure data from different sources are to be combined in a single file of micro or grouped data in a way consistent with the case-control study design. Among other things, the proposed methodological approach offers the possibility to use in-depth data of the GIDAS type also in investigations of active vehicle safety by combining this data with appropriate vehicle trip data collected in mobility surveys.
Active safety systems are aimed at accident prevention, hence the knowledge required for their development is different from that required for passive safety systems aimed at injury prevention. Particularly, knowledge about accident causation is required. When looking at existing accident causation data, it is argued it fails to explain in sufficient detail how and why the accidents occur. Therefore, there is a need for detailed micro-level descriptions of accident causation mechanisms, and also of methodologies suitable for creating such descriptions. One study addressing these needs is the Swedish project FICA (Factors Influencing the Causation of Accidents and Incidents), where an accident investigation methodology suitable for active safety is developed, and in-depth accident investigations following this methodology are carried out on-scene in the area of Gothenburg by a multidisciplinary team. A preliminary aggregated analysis of different cases shows that the methodology developed is adequate for pointing out common contributing factors and devising principal countermeasures.
The Netherlands is on the way to change its existing skid resistance measuring method for its highway network from the Dutch RAW 72, a longitudinal force method, to the Sideway Force method. This method is described in the Technical Specification 15901-8 (SKM device) as well as 15901-6 (SCRIM device) and is in use in 9 European countries. The CEN TC 227 WG5 on Surface Characteristics is currently working on combining of these two technical Specifications into a European standard for Sideway-Force (SWF) measurement devices. The idea of this change in the Netherlands was perceived in 2013 and since then a lot of meetings have been held with the different Dutch decision makers as well as with countries which currently operate SWF devices. There was an intensive exchange of knowledge about these devices and their corresponding quality assurance systems, because the Netherlands wanted to incorporate and rely on an existing system of a neighbor country without losing their present level of quality. The Netherlands has therefore decided to incorporate the German SKM approach. The network monitoring with the new system will start in 2017. To ensure the quality of skid resistance measurements and further cooperation in this field, it has been decided to initiate an alliance between BASt and the Dutch road owner Rijkswaterstaat (RWS). This alliance will facilitate an exchange of research activities, calibration of the Dutch systems according to the existing German Standard as well as control measurements with a BASt-device on the Dutch network during the network monitoring. During 2016 also comparative measurements will be performed on a network level with the current Dutch device and with an SKM device to determine a conversion between the two and to be able to define new threshold values.
The current paper reports on the results of a pilot study aiming to investigate the effect of mobile telephone use on the driving performance of 5 amateur and 5 professional drivers. Their driving acuity was tested through a driving simulator. Analysis and interpretation of the results occurred comparing the drivers' driving performance while talking, reading messages and writing a message on the mobile phone (intervention time) with the drivers' driving performance engaged in no activity (control time). The variables affected by the mobile phone were the "steering", the "lane offset" and the "duration of lane offset". Moreover, the drivers involved in a car crash in the last five years appeared to differ from those who were not involved in a crash in both "lane offset" and "following distance". The results of this pilot study will inform the design of a large experimental study on 50 professional and 50 amateur drivers.
The fact that ADAC Air Rescue handles approximately 4,000 road accident missions every year gave rise to set up an accident research programme for which ADAC Air Rescue provides its data. This data is of initial informational quality and will be supplemented by data from the police, experts, fire brigades as well as hospitals and forensic institutes. Although the number of cases is still rather low, certain tendencies can be identified. The causes for most accidents occur when joining or intersecting traffic, followed by speeding in road bends and tailgating. Many accidents involve HGV rear end collisions, often causing serious injuries, considerable damage and technical problems for the rescue operations. With regard to the various impact types, it has become obvious that most of the extremely serious injuries are inflicted during a passenger car side impact. In addition, access to and removal of trapped passengers is becoming more and more complicated, partly due to the increasing use of high-strength materials, and rescue operations tend to be more time consuming.
Because of actual developments and the continuous increase in the field of drive assistant systems, representative and detailed investigations of accident databases are necessary. This lecture describes the possibility to estimate the potential of primary and secondary safety measures by means of a computerized case by case analysis. Single primary or secondary safety measures as well as a combination of both are presented. The method is exemplarily shown for the primary safety measure "Brake Assist" in pedestrian accidents. Regarding accident prevention only the primary safety measure is determined.
Accidents involving two wheels vehicles represent one of the more important types of accidents in Europe. These accidents are usually not easy to reconstruct specially for the analysis of the injuries and its correlation with accident dynamics and evidences. Different methodologies are applied in this work for the reconstruction of two wheeler accidents, especially accident involving motorcycles. From the typologies of road evidences like skid marks, to the use of Pc-Crash and the use of Madymo models, different reconstruction of real accidents are presented. One of the questions that sometimes arise for legal purposes when some type of head injuries arise is if the occupant was wearing or not a helmet. The correlation of head injuries with the use of the helmet is a very important issue, therefore an important legal aspect. One of the key questions for the reconstructions that is difficult to analyze, is if the vehicle occupant, was or not, wearing the helmet. Based on the previously collected information, a generic model of a helmet was developed on CAD 3D, followed by its conversion into finite elements, all in order to perform impact tests using the Madymo software that would help improve the helmet- safety, but that also can be used as a tool in accident reconstruction.
The levels of continuous vehicle automation have become common knowledge. They facilitate overall understanding of the issue. Yet, continuous vehicle automation described therein does not cover "automated driving" as a whole: Functions intervening temporarily in accident-prone situations can obviously not be classified by means of continuous levels. Continuous automation describes the shift in workload from purely human driven vehicles to full automation. Duties of the driver are assigned to the machine as automation levels rise. Emergency braking, e.g., is obviously discontinuous and intensive automation. It cannot be classified under this regime. The resulting absence of visibility of these important functions cannot satisfy " especially in the light of effect they take on traffic safety. Therefore, in order to reach a full picture of vehicle automation, a comprehensive approach is proposed that can map out different characteristics as "Principle of Operation" at top level. On this basis informing and warning functions as well as functions intervening only temporarily in near-accident situations can be described. To reach a complete picture, levels for the discontinuous, temporarily intervening functions are proposed " meant to be the counterpart of the continuous levels already in place. This results in a detailed and independent classification for accident-prone situations. This finally provides for the visibility these important functions deserve.
In recent years the boundaries between active and passive safety blurred more and more. Passive safety in the traditional term includes all safety aspects to prevent occupants to be injured or at least injury severity should be reduced. Passive Safety starts with the collision (first vehicle contact) and ends with rescue (open vehicle doors). Within this phase the occupant has to be protected by the passenger compartment whereby no intrusion should occur. Active safety on the other side was developed to interact prior to the collision whereby the goal is to prevent accidents. The extensive interaction between active and passive safety led to the terminologies "Primary" and "Secondary" safety whereas the expression Integrated Safety Concept was generated. Within this study the most well documented single vehicle accidents with cars not equipped with ESP were identified from the PENDANT database and reconstructed. Additional cases were found in the database ZEDATU of TU Graz. In comparison each case was simulated with the assumption that the cars were equipped with ESP. The differences regarding accident avoidance or crash severity as well as reduction of injury risk were analysed.
In order to enable foreseeing or comparing the benefit of safety systems or driver assistance systems in Germany, in the United States and in Japan, the traffic accident databases in those three countries are examined. The variables used are culpable party, collision partner, accident type, and injury level and the method to re-classify the databases for comparison are proposed. The result indicates that single passenger car fatality is the most frequent in Germany and in the United States, while passenger car vs. pedestrian is the most frequent fatality scenario in Japan. When the casualty by fatality ratio is focused, the greatest difference is observed in rear-end collisions. The ratio of slight injuries in Japan yields about eighteen times as many as those in Germany, and about eight times as many as those in the United States.
In the European Project FIMCAR, a proposal for a frontal impact test configuration was developed which included an additional full width deformable barrier (FWDB) test. Motivation for the deformable element was partly to measure structural forces as well as to produce a severe crash pulse different from that in the offset test. The objective of this study was to analyze the safety performance of vehicles in the full width rigid barrier test (FWRB) and in the full width deformable barrier test (FWDB). In total, 12 vehicles were crashed in both configurations. Comparison of these tests to real world accident data was used to identify the crash barrier most representative of real world crashes. For all vehicles, the airbag visible times were later in the FWDB configuration. This was attributed to the attenuation of the initial acceleration peak, observed in FWRB tests, by the addition of the deformable element. These findings were in alignment with airbag triggering times seen in real world crash data. Also, the dummy loadings were slightly worse in FWDB compared to FWRB tests, which is possibly linked to the airbag firing and a more realistic loading of the vehicle crash structures in the FWDB configuration. Evaluations of the lower extremities have shown a general increasing of the tibia index with the crash pulse severity.
For the determination of the road surface roughness common methods have been established, like Skid Resistance Tester (SRT) or the Sideway-force Coefficient Routine Investigation Machine (SCRIM). Both methods are used to measure a comparable and reliable maximum friction potential value and to assess the quality of the road surface. However, the comparison of the measurements under real conditions and the results of measurements with SRT and SCRIM showed only minor correlations. The paper shows the comparison between these standardised methods and real vehicle braking tests and discusses the results.
In this study, we compared the injury severity of occupants according to the seating position and the crashing direction in motor vehicle accidents. In the driver's point of view, it was separated the seating position as "Near-side" and "Far-side". The study subjects were targeted by people who visited 4 regional emergency centers following motor vehicle accidents. Real-world investigation was performed by direct and indirect methods after patient- consent. The information of the damaged vehicle was informed by Collision Deformation Classification (CDC) code and the information of the injury of patients was informed by using the Abbreviated Injury Score (AIS) and Injury Severity Score (ISS). When the column 3 in CDC code was P, damaged at the middle part of lateral side, the average point of AIS 3 was 1.91-±1.72 in near-side and 1.02-±1.31 in far-side (p<0.01). The average point of maximum AIS (MAIS) was 2.78-±1.39 in near-side and 2.02-±1.11 in far-side (p<0.01). The average point of ISS was 15.74-±14.71 in near-side and 8.11-±8.39 in far-side (p<0.01). Also, when the column 3 in CDC code was D, damaged at the whole part of lateral side, it was significant that the average point of AIS 3 and MAIS in near-side was bigger than in far-side (p=0.02).
The aim of this study is to investigate the differences in car occupant injury severity recorded in AIS 2005 compared to AIS 1990 and to outline the likely effects on future data analysis findings. Occupant injury data in the UK Cooperative Crash Injury Study Database (CCIS) were coded for the period February 2006 to November 2007 using both AIS 1990 and AIS 2005. Data for 1,994 occupants with over 6000 coded injuries were reviewed at the AIS and MAIS level of severities and body regions to determine changes between the two coding methodologies. Overall there was an apparent general trend for fewer injuries to be coded at the AIS 4+ severity and more injuries to be coded at the AIS 2 severity. When these injury trends were reviewed in more detail it was found that the body regions which contributed the most to these changes in severity were the head, thorax and extremities. This is one of the first studies to examine the implications for large databases when changing to an updated method for coding injuries.
A series of drop tests and vehicle tests with the adult head impactor according to Regulation (EC) 631/2009 and drop tests with the phantom head impactor according to UN Regulation No. 43 have been carried out by the German Federal Highway Research Institute (BASt) on behalf of the German Federal Ministry of Transport, Building and Urban Development (BMVBS). Aim of the test series was to study the injury risk for vulnerable road users, especially pedestrians, in case of being impacted by a motor vehicle in a way described within the European Regulations (EC) 78/2009 and (EC) 631/2009. Furthermore, the applicability of the phantom head drop test described in UN Regulation No. 43 for plastic glazing should be investigated. In total, 30 drop tests, thereof 18 with the adult head impactor and 12 with the phantom head impactor, and 49 vehicle tests with the adult head impactor were carried out on panes of laminated safety glass (VSG), polycarbonate (PC) and laminated polycarbonate (L-PC). The influence of parameters such as the particular material properties, test point locations, fixations, ambient conditions (temperature and impact angle) was investigated in detail. In general, higher values of the Head Injury Criterion (HIC) were observed in tests on polycarbonate glazing. As the HIC is the current criterion for the assessment of head injury risk, polycarbonate glazing has to be seen as more injurious in terms of vulnerable road user protection. In addition, the significantly higher rebound of the head observed in tests with polycarbonate glazing is suspected to lead to higher neck loads and may also cause higher injury risks in secondary impacts of vulnerable road users. However, as in all tests with PC glazing no damage of the panes was observed, the risk of skin cut injuries may be expected to be reduced significantly. The performed test series give no indication for the test procedure prescribed in UN Regulation No. 43 as a methodology to approve glass windscreen not being feasible for polycarbonate glazing, as all PC panes tested fulfilled the UN R 43 requirements. The performance of the windscreen area will not be relevant for vehicle type approval according to the upcoming UN Regulation for pedestrian protection. However, it is recommended that pedestrian protection being considered for plastic windscreens to ensure at least the same level of protection as glass windscreens.