Sonstige
Filtern
Erscheinungsjahr
Dokumenttyp
Sprache
- Englisch (74) (entfernen)
Volltext vorhanden
- nein (74) (entfernen)
Schlagworte
- Bewertung (20)
- Evaluation (assessment) (19)
- Safety (18)
- Sicherheit (18)
- Anfahrversuch (16)
- Conference (16)
- Konferenz (16)
- Prüfverfahren (16)
- Test method (16)
- Impact test (veh) (15)
- Injury (15)
- Verletzung (15)
- Accident (13)
- Dummy (13)
- Unfall (13)
- Anthropometric dummy (12)
- Fußgänger (12)
- Pedestrian (12)
- Simulation (11)
- Collision (10)
- Europa (10)
- Europe (10)
- Deutschland (9)
- Driver assistance system (9)
- Frontalzusammenstoß (9)
- Germany (9)
- Head on collision (9)
- Zusammenstoß (9)
- Analyse (math) (8)
- Analysis (math) (8)
- Biomechanics (8)
- Biomechanik (8)
- Fahrerassistenzsystem (8)
- Fahrzeug (7)
- Radfahrer (7)
- Schweregrad (Unfall (7)
- Verletzung) (7)
- injury) (7)
- Cyclist (6)
- Head (6)
- Kopf (6)
- Messung (6)
- Schweregrad (Unfall, Verletzung) (6)
- Severity (accid, injury) (6)
- Vehicle (6)
- Car (5)
- Child (5)
- Datenbank (5)
- Driver (5)
- Fahrer (5)
- Kind (5)
- Knee (human) (5)
- Measurement (5)
- Passive safety system (5)
- Passives Sicherheitssystem (5)
- Risikobewertung (5)
- Risk assessment (5)
- Severity (accid (5)
- Standardisierung (5)
- Standardization (5)
- Transport infrastructure (5)
- Tunnel (5)
- Accident prevention (4)
- Alte Leute (4)
- Autobahn (4)
- Brustkorb (4)
- Compatibility (4)
- Deformation (4)
- Fatality (4)
- Impact test (4)
- Improvement (4)
- Insasse (4)
- Knie (menschl) (4)
- Kompatibilität (4)
- Leg (human) (4)
- Motorway (4)
- Reproducibility (4)
- Reproduzierbarkeit (4)
- Research project (4)
- Seitlicher Zusammenstoß (4)
- Side impact (4)
- Test (4)
- Thorax (4)
- Tödlicher Unfall (4)
- Unfallverhütung (4)
- Vehicle occupant (4)
- Verbesserung (4)
- Verkehrsinfrastruktur (4)
- Versuch (4)
- Autonomes Fahren (3)
- Autonomous driving (3)
- Behaviour (3)
- Bein (menschl) (3)
- Bemessung (3)
- Benutzung (3)
- Braking (3)
- Bremsung (3)
- Deformable barrier (impact test) (3)
- Deformierbare Barriere (Anpralltest) (3)
- Design (overall design) (3)
- Fahrzeuginnenraum (3)
- Forschungsarbeit (3)
- Gefahrenabwehr (3)
- Gesetzgebung (3)
- Hospital (3)
- Interior (veh) (3)
- Krankenhaus (3)
- Legislation (3)
- Modification (3)
- Motorcyclist (3)
- Motorradfahrer (3)
- Old people (3)
- Pkw (3)
- Security (3)
- Statistics (3)
- Statistik (3)
- Use (3)
- Verformung (3)
- Verhalten (3)
- Veränderung (3)
- Abdomen (2)
- Active safety system (2)
- Air pollution (2)
- Airbag (2)
- Aktives Sicherheitssystem (2)
- Anti locking device (2)
- Attitude (psychol) (2)
- Aufprallschlitten (2)
- Automatic (2)
- Automatisch (2)
- Autonomes Fahrzeug (2)
- Autonomous vehicle (2)
- Belastung (2)
- Boden (2)
- Cervical vertebrae (2)
- Classification (2)
- Climate change (2)
- Cost benefit analysis (2)
- Crash Test (2)
- Data acquisition (2)
- Data bank (2)
- Database (2)
- Datenerfassung (2)
- Dauerhaftigkeit (2)
- Detection (2)
- Detektion (2)
- Development (2)
- Driver information (2)
- Driving (veh) (2)
- Durability (2)
- Einstellung (psychol) (2)
- Electric vehicle (2)
- Elektrofahrzeug (2)
- Entwicklung (2)
- Error (2)
- Fahrerinformation (2)
- Fahrstabilität (2)
- Fahrzeugführung (2)
- Fahrzeugsitz (2)
- Fehler (2)
- Fire (2)
- Front (2)
- Halswirbel (2)
- Highway design (2)
- Human body (2)
- Impact sled (2)
- Intelligent transport system (2)
- International (2)
- Klassifizierung (2)
- Klimawandel (2)
- Landstraße (2)
- Load (2)
- Luftverunreinigung (2)
- Mathematical model (2)
- Medical aspects (2)
- Medizinische Gesichtspunkte (2)
- Menschlicher Körper (2)
- Method (2)
- Motorcycle (2)
- Motorrad (2)
- Norm (tech) (2)
- On the spot accident investigation (2)
- Rechenmodell (2)
- Road network (2)
- Rural road (2)
- Safety belt (2)
- Seat (veh) (2)
- Severity (acid (2)
- Sicherheitsgurt (2)
- Soil (2)
- Specification (standard) (2)
- Spinal column (2)
- Straßenentwurf (2)
- Straßennetz (2)
- Straßenverkehrsrecht (2)
- Surfacing (2)
- Technologie (2)
- Technology (2)
- Traffic regulations (2)
- USA (2)
- Unterleib (2)
- Untersuchung am Unfallort (2)
- Vehicle handling (2)
- Wirbelsäule (2)
- Wirtschaftlichkeitsrechnung (2)
- (menschl) (1)
- Abfluss (1)
- Absorption (1)
- Accident rate (1)
- Active safety (1)
- Adult (1)
- Aged people (1)
- Air bag (restraint system) (1)
- Air quality management (1)
- Air transport (1)
- Aktive Sicherheit (1)
- Angle (1)
- Anthropmetric dummy (1)
- Antiblockiereinrichtung (1)
- Antiblockiersystem (1)
- Apparatus (measuring) (1)
- Arzneimittel (1)
- Asphaltstraße (Oberbau) (1)
- Auffahrunfall (1)
- Ausrüstung (1)
- Bau (1)
- Bearing capacity (1)
- Bein (1)
- Bicyclist (1)
- Brand (1)
- Bridge (1)
- Bridge management system (1)
- Brücke (1)
- Brücken Management System (1)
- Cadaver (1)
- Calibration (1)
- Camera (1)
- Carriageway (1)
- Cause (1)
- Chassis (1)
- Clay (1)
- Communication (1)
- Condition survey (1)
- Construction (1)
- Correlation (1)
- Crashtest (1)
- Critical path method (1)
- Damage (1)
- Data base (1)
- Data processing (1)
- Datenverarbeitung (1)
- Decision process (1)
- Decke (Straße) (1)
- Decke [Straße] (1)
- Deicing (1)
- Delivery vehicle (1)
- Demand (econ) (1)
- Demografie (1)
- Demography (1)
- Deterioration (1)
- Diagnostik (1)
- Diffusion (1)
- Digitale Bildverarbeitung (1)
- Dispersion (stat) (1)
- Driving aptitude (1)
- Droge (1)
- Drugs (1)
- Drunkenness (1)
- EU (1)
- Earthworks (1)
- Echtzeit (1)
- Education (1)
- Efficiency (1)
- Eichung (1)
- Electronic stability program (1)
- Elektronisches Stabilitätsprogramm (1)
- Emergency (1)
- Empfindlichkeit (1)
- Enteisung (1)
- Entscheidungsprozess (1)
- Environment (1)
- Environment protection (1)
- Equipment (1)
- Erdarbeiten (1)
- Erste Hilfe (1)
- Erwachsener (1)
- Erziehung (1)
- Evaluation (Assessment) (1)
- Expert system (1)
- Expertensystem (1)
- Fahrassistenzsystem (1)
- Fahrbahn (1)
- Fahrleistung (1)
- Fahrstreifen (1)
- Fahrtauglichkeit (1)
- Fahrwerk (1)
- Fein (mater) (1)
- Feinstaub (1)
- Fernverkehrsstrasse (1)
- Feuer (1)
- Fine (mater) (1)
- Finite element method (1)
- First aid (1)
- Flexible pavement (1)
- Flooding (1)
- Foot (not a measure) (1)
- Frau (1)
- Fugenfüllung (1)
- Fuß (1)
- Fußgängerbereich (1)
- Geomembran (1)
- Geomembrane (1)
- Geschwindigkeit (1)
- Gewicht (1)
- Greenhouse effect (1)
- Griffigkeit (1)
- Ground water (1)
- Grundwasser (1)
- Haftung (jur) (1)
- Head (human) (1)
- Heavy metal (1)
- Height (1)
- Höhe (1)
- Hüfte (menschl) (1)
- Image processing (1)
- Impact study (1)
- Incident detection (1)
- Incident management (1)
- Information (1)
- Intelligentes Transportsystem (1)
- Intelligentes Verkehrssystem (1)
- Interface (1)
- Intersection (1)
- Interview (1)
- Jahreszeit (1)
- Kamera (1)
- Kleintransporter (1)
- Knie (1)
- Knotenpunkt (1)
- Kommunikation (1)
- Kopf (menschl) (1)
- Korn (1)
- Kornverteilung (1)
- Korrelation(Math (1)
- Kraftfahrzeug (1)
- Layer (1)
- Learning (1)
- Lebenszyklus (1)
- Leichnam (1)
- Leistungsfähigkeit (allg) (1)
- Lernen (1)
- Level of service (1)
- Liability (1)
- Luftreinhaltung (1)
- Lufttransport (1)
- Main road (1)
- Market (1)
- Markt (1)
- Materialveraenderung (allg) (1)
- Medical examination (1)
- Medication (1)
- Medizinische Untersuchung (1)
- Merging (1)
- Messgerät (1)
- Mesurement (1)
- Methode der finiten Elemente (1)
- Motorisierungsgrad (1)
- Nachfrage (1)
- Network (traffic) (1)
- Netzplantechnik (1)
- Neural network (1)
- Neuronales Netz (1)
- Nitric acid (1)
- Non destructive testing (1)
- Notfall (1)
- Oberfläche (1)
- Overlapping (1)
- PVC (1)
- Particle (1)
- Particle size distribution (1)
- Particulate matter (1)
- Peat (1)
- Pedestrian precinct (1)
- Pelvis (1)
- Pfahl (1)
- Pile (1)
- Planning (1)
- Planung (1)
- Policy (1)
- Politik (1)
- Pollutant (1)
- Polyvinylchloride (1)
- Preloading (soil) (1)
- Prevention (1)
- Probability (1)
- Prototyp (1)
- Prototype (1)
- Prüefverfahren (1)
- Public transport (1)
- Rain (1)
- Real-time (1)
- Rear end collision (1)
- Reconstruction (accid) (1)
- Regen (1)
- Regional planning (1)
- Regionalplanung (1)
- Richtlinien (1)
- Risiko (1)
- Risikoverhalten (1)
- Risk (1)
- Risk taking (1)
- Road (1)
- Road user (1)
- Robot (1)
- Roboter (1)
- Run off (1)
- Sachschaden (1)
- Safety fence (1)
- Salpetersäure (1)
- Schadstoff (1)
- Schicht (1)
- Schnittstelle (1)
- Schutz (1)
- Schutzeinrichtung (1)
- Schwermetall (1)
- Sealing compound (1)
- Season (1)
- Seite (1)
- Sensitivity (1)
- Sensor (1)
- Service life (1)
- Settlement (1)
- Setzung (1)
- Side (1)
- Skidding resistance (1)
- Social factors (1)
- Soziale Faktoren (1)
- Spain (1)
- Spanien (1)
- Specifications (1)
- Speed (1)
- Stadtplanung (1)
- Stand der Technik (Bericht) (1)
- Standardabweichung (1)
- Stat) (1)
- State of the art report (1)
- Straße (1)
- Stress (psychol) (1)
- Störfallentdeckung (1)
- Störfallmanagement (1)
- Subsoil (1)
- Surface (1)
- Technische Vorschriften (Kraftfahrzeug) (1)
- Test procedure (1)
- Ton (Gestein) (1)
- Torf (1)
- Town planning (1)
- Traffic (1)
- Traffic lane (1)
- Traffic restraint (1)
- Tragfähigkeit (1)
- Transport mode (1)
- Treibhauseffekt (1)
- Trunkenheit (1)
- Umwelt (1)
- Umweltschutz (1)
- Unfallhäufigkeit (1)
- Unfallrekonstruktion (1)
- United Kindom (1)
- Untergrund (1)
- Ursache (1)
- Vehicle mile (1)
- Vehicle ownership (1)
- Vehicle regulations (1)
- Vereinigtes Königreich (1)
- Verfahren (1)
- Verfahren ; Verkehrsinfrastruktur (1)
- Verhütung (1)
- Verkehr (1)
- Verkehrsbeschränkung (1)
- Verkehrsmittel (1)
- Verkehrsnetz (1)
- Verkehrsqualität (1)
- Verkehrsteilnehmer (1)
- Verkehrsverflechtung (1)
- Virtual reality (1)
- Virtuelle Realität (1)
- Vorbelastung (Boden) (1)
- Vorn (1)
- Vorne (1)
- Wahrscheinlichkeit (1)
- Weather (1)
- Weight (1)
- Windschutzscheibe (1)
- Windscreen (veh) (1)
- Winkel (1)
- Wirkungsanalyse (1)
- Witterung (1)
- Woman (1)
- Zerstörungsfreie Prüfung (1)
- Zusammenstoss (1)
- Zustandsbewertung (1)
- Öffentlicher Verkehr (1)
- Überdeckung (1)
- Überschwemmung (1)
Institut
- Sonstige (74) (entfernen)
This paper deals with the determination of test criteria for the durability assessment of polyvinyl chloride (PVC)-based geosynthetic barriers (GBR-P) products in tunnel sealing systems. In the project different products for road tunnel application are investigated by systematic long time storage in hot water using a new test procedure based on SIA V 280 standard (test no. 13) and EN 14415. The objective of this research project is to derive suitable exposure conditions and criteria for a practical testing procedure with regard to service lifetimes of up to 100 years. For that test temperature and time as well as the best suitable test medium have been investigated in a structured way. To verify the results of the new test procedure the material properties of GBR-P samples removed from older road tunnels are investigated. Based on the presented results of the still on-going research program some preliminary conclusions regarding the updating of the German regulations for road tunnel sealing systems (ZTV-ING part 5 section 5 and TL/TP KDB) are given.
The first stage of the work has been to collate information on bridge assessment from the participating countries. In the later stages, the aim is to provide guidelines that reflect the current best practices, a methodology that will allow for future development and sufficient flexibility to accommodate variations in national priorities as the process of harmonisation is pursued. The following tasks fall within the scope of the project: (1) a review of current procedures and standards used for bridge assessment in Europe; (2) the development of models for taking into account the bridge specific traffic conditions and material properties; (3) the use of reliability methods based on a probabilistic approach for bridge assessment including the use of measurements for updating the reliability of structural elements; and (4) the provision of recommendations for methods and procedures that can be adopted for the assessment module of the management framework highlighting where further development will be beneficial.
The goal of the project FIMCAR (Frontal Impact and Compatibility Assessment Research) was to define an integrated set of test procedures and associated metrics to assess a vehicle's frontal impact protection, which includes self- and partner-protection. For the development of the set, two different full-width tests (full-width deformable barrier [FWDB] test, full-width rigid barrier test) and three different offset tests (offset deformable barrier [ODB] test, progressive deformable barrier [PDB] test, moveable deformable barrier with the PDB barrier face [MPDB] test) have been investigated. Different compatibility assessment procedures were analysed and metrics for assessing structural interaction (structural alignment, vertical and horizontal load spreading) as well as several promising metrics for the PDB/MPDB barrier were developed. The final assessment approach consists of a combination of the most suitable full-width and offset tests. For the full-width test (FWDB), a metric was developed to address structural alignment based on load cell wall information in the first 40 ms of the test. For the offset test (ODB), the existing ECE R94 was chosen. Within the paper, an overview of the final assessment approach for the frontal impact test procedures and their development is given.
In Germany road tunnels on major roads which are longer than 400 m have to be monitored permanently. For that purpose the tunnels are equipped with a multitude of monitoring and detection systems whose data and messages are transmitted to tunnel control centres. Due to the higher traffic density, the increasing number of tunnels to be monitored and road users" demand of higher safety and security levels, the strains on operating staff of tunnel control centres have continuously been growing. Therefore, innovative approaches have been developed in two recent German research projects: RETISS " Real Time Security Management System, and ESIMAS " Real-time Safety Management System for road Tunnels. Both systems are designed to allow faster and more efficient reaction of tunnel operators in order to maintain the capacity and availability of transport infrastructures but also to improve the safety and security of road users.
The market introduction and penetration of electric vehicles can be seen as a milestone in order to reduce the environmental burden imposed by the transport sector. The wide-spread use of electric vehicles powered by electricity from renewable sources promises a substantial reduction of local emissions in urban areas as well as greenhouse gas emissions. To be a successful mobility alternative several obstacles and challenges have to be overcome first. Especially the customers' purchase decision determines finally whether an innovation like electromobility will be successful. Therefore, this paper concentrates on demand-related obstacles and barriers for a broad market deployment of electric cars. Within the Electromobility+ project eMAP these issues are investigated via a consumer survey. It was designed to identify the awareness of potential consumers of electric cars as well as give an estimate of the attitude towards this new technology. In addition to the picture of potential demand-related obstacles the consumers were asked to evaluate the suitability of various promotion measures.
In the European Project FIMCAR, a proposal for a frontal impact test configuration was developed which included an additional full width deformable barrier (FWDB) test. Motivation for the deformable element was partly to measure structural forces as well as to produce a severe crash pulse different from that in the offset test. The objective of this study was to analyze the safety performance of vehicles in the full width rigid barrier test (FWRB) and in the full width deformable barrier test (FWDB). In total, 12 vehicles were crashed in both configurations. Comparison of these tests to real world accident data was used to identify the crash barrier most representative of real world crashes. For all vehicles, the airbag visible times were later in the FWDB configuration. This was attributed to the attenuation of the initial acceleration peak, observed in FWRB tests, by the addition of the deformable element. These findings were in alignment with airbag triggering times seen in real world crash data. Also, the dummy loadings were slightly worse in FWDB compared to FWRB tests, which is possibly linked to the airbag firing and a more realistic loading of the vehicle crash structures in the FWDB configuration. Evaluations of the lower extremities have shown a general increasing of the tibia index with the crash pulse severity.
Trauma management (TM) covers two types of medical treatment: the initial one provided by Emergency Medical Services (EMS) and a further one provided by permanent medical facilities. There is a consensus in the professional literature that to reduce the severity and the number of road crash victims, the TM system should provide rapid and adequate initial care of injury, combined with sufficient further treatment at a hospital or trauma centre. Recognizing the important role of TM for reducing road crash injury outcome, it was decided, within the EU funded SafetyNet project, to develop road safety performance indicators (SPIs) which would characterize the level of TM systems" performance in European countries and enable country comparisons. The concept of TM SPIs was developed based on a literature study of performance indicators in TM, a survey of available practices in Europe and data availability examinations. A set of TM SPIs was introduced including 14 indicators which characterize five issues such as: availability of EMS stations; availability and composition of EMS medical staff; availability and composition of EMS transportation units; characteristics of the EMS response time, and availability of trauma beds in permanent medical facilities. Basic information on the TM systems was collected in close cooperation with the national expert group. A dataset with TM SPIs for 21 countries was created. It was demonstrated that the countries can be compared using selected TM SPIs. Moreover, a more general comparison of the TM systems' performance in the countries is possible, using multiple ranking and statistical weighting techniques. By both methods, final estimates were received enabling the recognition of groups of countries with similar levels of the TM system's performance. The results of various trials were consistent as to the recognition of countries with high or low level of the TM systems" performance, where in grouping countries with intermediate levels of the TM system's performance some differences were observed. The SafetyNet project's practice demonstrated that data collection for estimating TM SPIs is not an easy task but is realizable for the majority of countries. The TM SPIs" message is currently limited to the availability of trauma care services. Further development of the TM SPIs should focus on characteristics of actual treatment supplied, based on combined police and medical road crash related databases.
To improve vehicle safety in frontal collisions, the crash compatibility between the colliding vehicles is crucial. Compatibility aims to improve both the self and partner protection properties of vehicles. Although compatibility has received worldwide attention for many years, no final assessment approach has been defined. Within the Frontal Impact and Compatibility Assessment Research (FIMCAR) project, different frontal impact test procedures (offset deformable barrier [ODB] test as currently used for Economic Commission for Europe [ECE] R94, progressive deformable barrier test as proposed by France for a new ECE regulation, moveable deformable barrier test as discussed worldwide, full-width rigid barrier test as used in Federal Motor Vehicle Safety Standard [FMVSS] 208, and full-width deformable barrier test) were analyzed regarding their potential for future frontal impact legislation. The research activities focused on car-to-car frontal impact accidents based on accident investigations involving newer cars. Test procedures were developed with both a crash test program and numerical simulations. The proposal from FIMCAR is to use a full-width test procedure with a deformable element and compatibility metrics in combination with the current offset test as a frontal impact assessment approach that also addresses compatibility. By adding a full-width test to the current ODB test it is possible to better address the issues of structural misalignment and injuries resulting from high acceleration accidents as observed in the current fleet. The estimated benefit ranges from a 5 to 12 percent reduction of fatalities and serious injuries resulting from frontal impact accidents. By using a deformable element in the full-width test, the test conditions are more representative of real-world situations with respect to acceleration pulse, restraint system triggering time, and deformation pattern of the front structure. The test results are therefore expected to better represent real-world performance of the tested car. Furthermore, the assessment of the structural alignment is more robust than in the rigid wall test.
The strong prevalence of human error as a crash causation factor in motorcycle accidents calls for countermeasures that help tackling this issue. Advanced rider assistance systems pursue this goal, providing the riders with support and thus contributing to the prevention of crashes. However, the systems can only enhance riding safety if the riders use them. For this reason, acceptance is a decisive aspect to be considered in the development process of such systems. In order to be able to improve behavioural acceptance, the factors that influence the intention to use the system need to be identified. This paper examines the particularities of motorcycle riding and the characteristics of this user group that should be considered when predicting the acceptance of advanced rider assistance systems. Founded on theories predicting behavioural intention, the acceptance of technologies and the acceptance of driver support systems, a model on the acceptance of advanced rider assistance systems is proposed, including the perceived safety when riding without support, the interface design and the social norm as determinants of the usage intention. Since actual usage cannot be measured in the development stage of the systems, the willingness to have the system installed on the own motorcycle and the willingness to pay for the system are analyzed, constituting relevant conditions that allow for actual usage at a later stage. Its validation with the results from user tests on four advanced rider assistance systems allows confirming the social norm and the interface design as powerful predictors of the acceptance of ARAS, while the extent of perceived safety when riding without support did not have any predictive value in the present study.
The United Nations Economic Commission for Europe Informal Group on GTR No. 7 Phase 2 are working to define a build level for the BioRID II rear impact (whiplash) crash test dummy that ensures repeatable and reproducible performance in a test procedure that has been proposed for future legislation. This includes the specification of dummy hardware, as well as the development of comprehensive certification procedures for the dummy. This study evaluated whether the dummy build level and certification procedures deliver the desired level of repeatability and reproducibility. A custom-designed laboratory seat was made using the seat base, back, and head restraint from a production car seat to ensure a representative interface with the dummy. The seat back was reinforced for use in multiple tests and the recliner mechanism was replaced by an external spring-damper mechanism. A total of 65 tests were performed with 6 BioRID IIg dummies using the draft GTR No.7 sled pulse and seating procedure. All dummies were subject to the build, maintenance, and certification procedures defined by the Informal Group. The test condition was highly repeatable, with a very repeatable pulse, a well-controlled seat back response, and minimal observed degradation of seat foams. The results showed qualitatively reasonable repeatability and reproducibility for the upper torso and head accelerations, as well as for T1 Fx and upper neck Fx. However, reproducibility was not acceptable for T1 and upper neck Fz or for T1 and upper neck My. The Informal Group has not selected injury or seat assessment criteria for use with BioRID II, so it is not known whether these channels would be used in the regulation. However, the ramping-up behavior of the dummy showed poor reproducibility, which would be expected to affect the reproducibility of dummy measurements in general. Pelvis and spine characteristics were found to significantly influence the dummy measurements for which poor reproducibility was observed. It was also observed that the primary neck response in these tests was flexion, not extension. This correlates well with recent findings from Japan and the United States showing a correlation between neck flexion and injury in accident replication simulations and postmortem human subjects (PMHS) studies, respectively. The present certification tests may not adequately control front cervical spine bumper characteristics, which are important for neck flexion response. The certification sled test also does not include the pelvis and so cannot be used to control pelvis response and does not substantially load the lumbar bumpers and so does not control these parts of the dummy. The stiffness of all spine bumpers and of the pelvis flesh should be much more tightly controlled. It is recommended that a method for certifying the front cervical bumpers should be developed. Recommendations are also made for tighter tolerance on the input parameters for the existing certification tests.