Abteilung Fahrzeugtechnik
Filtern
Erscheinungsjahr
Dokumenttyp
Sprache
- Englisch (90)
- Deutsch (51)
- Mehrsprachig (1)
Volltext vorhanden
- nein (142) (entfernen)
Schlagworte
- Safety (53)
- Sicherheit (53)
- Anfahrversuch (38)
- Vehicle (37)
- Bewertung (36)
- Evaluation (assessment) (36)
- Fahrzeug (36)
- Impact test (veh) (35)
- Test method (31)
- Prüfverfahren (29)
- Conference (25)
- Konferenz (24)
- Versuch (24)
- Test (23)
- Dummy (22)
- Fußgänger (22)
- Pedestrian (22)
- Accident (20)
- Driver assistance system (20)
- Unfall (20)
- Anthropometric dummy (19)
- Fahrerassistenzsystem (19)
- Injury (19)
- Verletzung (19)
- Simulation (18)
- Collision (17)
- Deutschland (16)
- Germany (16)
- Compatibility (15)
- Kompatibilität (15)
- Zusammenstoß (15)
- Europa (14)
- Europe (14)
- Frontalzusammenstoß (14)
- Head on collision (14)
- Car (13)
- Driver information (13)
- Fahrerinformation (13)
- Head (13)
- Kopf (13)
- Analyse (math) (12)
- Analysis (math) (12)
- Biomechanik (12)
- Driver (12)
- Fahrer (12)
- Fahrzeugführung (12)
- Radfahrer (12)
- Shock (12)
- Biomechanics (11)
- Child (11)
- Gesetzgebung (11)
- Kind (11)
- Legislation (11)
- Method (11)
- Passive safety system (11)
- Passives Sicherheitssystem (11)
- Pkw (11)
- Research project (11)
- Schlag (11)
- Verfahren (11)
- injury) (11)
- Cyclist (10)
- Driving (veh) (10)
- Forschungsarbeit (10)
- Measurement (10)
- Messung (10)
- Schweregrad (Unfall, Verletzung) (10)
- Technische Vorschriften (Kraftfahrzeug) (10)
- Verletzung) (10)
- Automatic (9)
- Automatisch (9)
- Autonomes Fahren (9)
- Autonomous driving (9)
- Behaviour (9)
- EU (9)
- Electronic driving aid (9)
- Elektronische Fahrhilfe (9)
- Schweregrad (Unfall (9)
- Severity (accid, injury) (9)
- Standardisierung (9)
- Technologie (9)
- Technology (9)
- Vehicle regulations (9)
- Verhalten (9)
- Bemessung (8)
- Design (overall design) (8)
- Improvement (8)
- Lkw (8)
- Lorry (8)
- Motorrad (8)
- Seitlicher Zusammenstoß (8)
- Severity (accid (8)
- Side impact (8)
- Verbesserung (8)
- Accident prevention (7)
- Active safety system (7)
- Aktives Sicherheitssystem (7)
- Ausrüstung (7)
- Brustkorb (7)
- Communication (7)
- Development (7)
- Entwicklung (7)
- Equipment (7)
- Insasse (7)
- Kommunikation (7)
- Motorcycle (7)
- Standardization (7)
- Thorax (7)
- Unfallverhütung (7)
- Vehicle occupant (7)
- Wirtschaftlichkeitsrechnung (7)
- Cost benefit analysis (6)
- Fahrstabilität (6)
- Fahrzeuginnenraum (6)
- Impact test (6)
- Interior (veh) (6)
- Knee (human) (6)
- Leistungsfähigkeit (allg) (6)
- Motorcyclist (6)
- Motorradfahrer (6)
- Norm (tech) (6)
- Specification (standard) (6)
- Traffic (6)
- Vehicle handling (6)
- Verkehr (6)
- Alte Leute (5)
- Aufprallschlitten (5)
- Crash helmet (5)
- Deformation (5)
- Deformierbare Barriere (Anpralltest) (5)
- Efficiency (5)
- Ergonomics (5)
- Fatality (5)
- Geschwindigkeit (5)
- Impact sled (5)
- Leg (human) (5)
- Official approval (5)
- Prevention (5)
- Reaction (human) (5)
- Reaktionsverhalten (5)
- Safety belt (5)
- Schutzhelm (5)
- Sicherheitsgurt (5)
- Speed (5)
- Statistics (5)
- Statistik (5)
- Traffic control (5)
- Tödlicher Unfall (5)
- Verkehrssteuerung (5)
- Airbag (4)
- Bein (menschl) (4)
- Belastung (4)
- Braking (4)
- Bremsung (4)
- Collision avoidance system (4)
- Database (4)
- Datenbank (4)
- Decrease (4)
- Ergonomie (4)
- Error (4)
- Fehler (4)
- Gewicht (4)
- Knie (menschl) (4)
- Lenken (Fahrzeug) (4)
- Load (4)
- Modification (4)
- Old people (4)
- Perception (4)
- Reproducibility (4)
- Reproduzierbarkeit (4)
- Richtlinien (4)
- Risiko (4)
- Risk (4)
- Specifications (4)
- Steering (process) (4)
- Verformung (4)
- Verhütung (4)
- Verminderung (4)
- Wahrnehmung (4)
- Weight (4)
- Anthropmetric dummy (3)
- Antikollisionssystem (3)
- Auffahrunfall (3)
- Behinderter (3)
- Benutzung (3)
- Classification (3)
- Deformable barrier (impact test) (3)
- Disabled person (3)
- Driving aptitude (3)
- Emission (3)
- Fahrtauglichkeit (3)
- Fahrzeugsitz (3)
- Human body (3)
- Impact study (3)
- International (3)
- Klassifizierung (3)
- Kraftfahrzeug (3)
- Mathematical model (3)
- Menschlicher Körper (3)
- Messgerät (3)
- Nacht (3)
- Night (3)
- Organisation (3)
- Rear end collision (3)
- Rechenmodell (3)
- Reifen (3)
- Road user (3)
- Seat (veh) (3)
- Severity (acid (3)
- Telecommunication (3)
- Telekommunikation (3)
- Telematics (3)
- Telematik (3)
- Tyre (3)
- Unterfahrschutz (3)
- Use (3)
- Verkehrsteilnehmer (3)
- Veränderung (3)
- Warning (3)
- Abdomen (2)
- Accident rate (2)
- Active safety (2)
- Adolescent (2)
- Air bag (restraint system) (2)
- Aktive Sicherheit (2)
- Ankündigung (2)
- Anti locking device (2)
- Apparatus (measuring) (2)
- Attitude (psychol) (2)
- Autonomes Fahrzeug (2)
- Autonomous vehicle (2)
- Baumusterzulassung (2)
- Bicycle (2)
- Bicyclist (2)
- Body (car) (2)
- Buch (2)
- Cause (2)
- Cervical vertebrae (2)
- Crash Test (2)
- Deceleration (2)
- Delivery vehicle (2)
- Detection (2)
- Detektion (2)
- Digital model (2)
- Einstellung (psychol) (2)
- Empfindlichkeit (2)
- Eye movement (2)
- Fahrrad (2)
- Force (2)
- Forschungsbericht (2)
- Front (2)
- Fuel consumption (2)
- Gestaltung (2)
- Halswirbel (2)
- Headlamp (2)
- Hospital (2)
- Hüfte (menschl) (2)
- Individueller Verkehr (2)
- Industrie (2)
- Industry (2)
- Intelligent transport system (2)
- Interface (2)
- Interview (2)
- Jugendlicher (2)
- Karosserie (2)
- Knie (2)
- Kraft (2)
- Kraftstoffverbrauch (2)
- Krankenhaus (2)
- Layout (2)
- Lärm (2)
- Mobility (2)
- Mobilität (2)
- Noise (2)
- Numerisches Modell (2)
- On the spot accident investigation (2)
- Organization (association) (2)
- Private transport (2)
- Prototyp (2)
- Prototype (2)
- Prüfstand (2)
- Reconstruction (accid) (2)
- Scheinwerfer (2)
- Schutz (2)
- Sensitivity (2)
- Sensor (2)
- Sichtbarkeit (2)
- Spinal column (2)
- State of the art report (2)
- Straßenverkehrsrecht (2)
- Stress (psychol) (2)
- Test rig (2)
- Textbook (2)
- Underride protection (2)
- Unfallhäufigkeit (2)
- Unfallrekonstruktion (2)
- Unterleib (2)
- Untersuchung am Unfallort (2)
- Ursache (2)
- Vehicle inspection (2)
- Verzögerung (2)
- Sichtbarkeit (2)
- Visual display (2)
- Wirbelsäule (2)
- Wirksamkeitsuntersuchung (2)
- Zulassung (tech) (2)
- Zusammenstoss (2)
- (menschl) (1)
- Ablenkung (1)
- Ablenkung (psychol) (1)
- Abnutzung (1)
- Absorption (1)
- Abstandsregeltempomat (1)
- Acceleration (1)
- Accident data (1)
- Accident proneness (1)
- Adaptive cruise control (1)
- Adult (1)
- Aged people (1)
- Angle (1)
- Anhänger (1)
- Antiblockiereinrichtung (1)
- Antiblockiersystem (1)
- Antikollisisonssystem (1)
- Apparatus (measurement) (1)
- Area traffic control (1)
- Arzneimittel (1)
- Asphaltstraße (Oberbau) (1)
- Attention (1)
- Aufmerksamkeit (1)
- Aufprall (1)
- Augenbewegungen (1)
- Autobahn (1)
- Battery (1)
- Baustelle (1)
- Bein (1)
- Benchmark (1)
- Benefit cost analysis (1)
- Beschleunigung (1)
- Bestrafung (1)
- Betriebsverhalten (1)
- Bildschirm (1)
- Biophysic (1)
- Blendung (1)
- Blind spot (veh) (1)
- Bonnet (car) (1)
- Brake (1)
- Brake light (1)
- Bremse (1)
- Bremslicht (1)
- Bridge (1)
- Bruch (mech) (1)
- Brücke (1)
- Bumper (1)
- Bus (1)
- Cadaver (1)
- Calibration (1)
- Carbon dioxide (1)
- Chassis (1)
- Cinematography (1)
- Compatiblity (1)
- Components of the car (1)
- Compression (1)
- Construction site (1)
- Contact (tyre road) (1)
- Control (1)
- Cooperative intelligent transport system (1)
- Correlation (math, stat) (1)
- Crashtest (1)
- Crossing the road (pedestrian) (1)
- Damage (1)
- Data acquisition (1)
- Data exchange (1)
- Data processing (1)
- Data security (1)
- Data transmission (telecom) (1)
- Datenaustausch (1)
- Datenerfassung (1)
- Datensicherheit (1)
- Datenverarbeitung (1)
- Datenübertragung (telekom) (1)
- Dauerhaftigkeit (1)
- Daylight (1)
- Deformable barrier (Impact test) (1)
- Deformable barrier system (impact test) (1)
- Dehnungsmessstreifen (1)
- Demografie (1)
- Demographie (1)
- Demography (1)
- Diesel engine (1)
- Dieselmotor (1)
- Dimension (1)
- Disstraction (1)
- Distraction (1)
- Driver (veh) (1)
- Driver training (1)
- Drunkenness (1)
- Durability (1)
- Dynamo (1)
- Echtzeit (1)
- Economic efficiency (1)
- Economics of transport (1)
- Eichung (1)
- Electric vehicle (1)
- Electroencephalography (1)
- Electronic stability program (1)
- Elektroencephalographie (1)
- Elektrofahrzeug (1)
- Elektronisches Stabilitätsprogramm (1)
- Emission control (1)
- Emissionskontrolle (1)
- Engine capacity (1)
- Environment (1)
- Erwachsener (1)
- European New Car Assessment Programme (1)
- Expert system (1)
- Expertensystem (1)
- Fahrassistenzsystem (1)
- Fahrausbildung (1)
- Fahrbahnmarkierung (1)
- Fahrbahnüberquerung (1)
- Fahrgeschicklichkeit (1)
- Fahrleistung (1)
- Fahrsimulator (1)
- Fahrstreifen (1)
- Fahrstreifenwechsel (1)
- Fahrwerk (1)
- Fahrzeugabstand (1)
- Fahrzeugbeleuchtung (1)
- Fahrzeugteile (1)
- Failure (1)
- Fatigue (human) (1)
- Federung (1)
- Feuer (1)
- Film (Filmtechnik) (1)
- Finite element method (1)
- Fire (1)
- Flexible pavement (1)
- Foot (not a measure) (1)
- Form (1)
- France (1)
- Frankreich (1)
- Frau (1)
- Freight transport (1)
- Freizeit (1)
- Frequency (1)
- Frequenz (1)
- Future transport mode (1)
- Fuß (1)
- Fußgängerbereich (1)
- Geländefahrzeug (1)
- Glare (1)
- Grenzfläche (1)
- Grenzwert (1)
- Güterverkehr (1)
- Haftung (jur) (1)
- Harmonization (1)
- Head (human) (1)
- Height (1)
- Herstellung (1)
- Highway (1)
- Highway design (1)
- Hinten (1)
- Hip (human) (1)
- Hubraum (1)
- Höhe (1)
- In Bewegung (1)
- In service behaviour (1)
- In situ (1)
- Incident detection (1)
- Information (1)
- Information documentation (1)
- Innenstadt (1)
- Intelligentes Transportsystem (1)
- Intelligentes Verkehrssystem (1)
- Interactive model (1)
- Interaktives Modell (1)
- Intersection (1)
- Kamera (1)
- Kleintransporter (1)
- Knotenpunkt (1)
- Kohlendioxid (1)
- Kompatiblität (1)
- Kontakt Reifen Straße (1)
- Kooperatives System (ITS) (1)
- Kopf (menschl) (1)
- Korrelation (math, stat) (1)
- Kunststoff (1)
- Landstraße (1)
- Lane changing (1)
- Leichnam (1)
- Leuchtdichte (1)
- Liability (1)
- Lichtsignal (1)
- Lidschlag (1)
- Lieferfahrzeug (1)
- Limit (1)
- Luminance (1)
- Manufacture (1)
- Market (1)
- Markt (1)
- Medical aspects (1)
- Medical examination (1)
- Medication (1)
- Medizinische Gesichtspunkte (1)
- Medizinische Untersuchung (1)
- Mensch Maschine Verhältnis (1)
- Text (1)
- Methode der finiten Elemente (1)
- Motor cycle (1)
- Motorhaube (1)
- Motorway (1)
- Moving (1)
- Müdigkeit (1)
- Nachricht (1)
- Nasse Straße (1)
- Naturalistic Driving (1)
- Naturalistic driving (1)
- Oberfläche (1)
- Oberflächentextur (1)
- Optimum (1)
- Optische Anzeige (1)
- Organization (1)
- Overlapping (1)
- Pavement Management System (1)
- Pavement management system (1)
- Pedestrian precinct (1)
- Pelvis (1)
- Penalty (1)
- Pfahl (1)
- Pile (1)
- Planning (1)
- Planung (1)
- Plastic material (1)
- Population (1)
- Productivity (1)
- Program (computer) (1)
- Prüefverfahren (1)
- Psychologie (1)
- Psychology (1)
- Public transport (1)
- Publicity (1)
- Quality (1)
- Qualität (1)
- Real time (1)
- Rear (1)
- Rear view mirror (1)
- Rechenprogramm (1)
- Recreation (1)
- Reflectorized material (1)
- Reflexstoffe (1)
- Research report (1)
- Retread tyre (1)
- Rippe (menschl) (1)
- Road marking (1)
- Road traffic (1)
- Robot (1)
- Roboter (1)
- Rotation (1)
- Runderneuerter Reifen (1)
- Rural road (1)
- Rutting (wheel) (1)
- Rückspiegel (1)
- Sachschaden (1)
- Safety fence (1)
- Schall (1)
- Schallpegel (1)
- Schnittstelle (1)
- Schulter (1)
- Schutzeinrichtung (1)
- Schweregrad /Unfall (1)
- Schwingung (1)
- Schädel (1)
- Sehvermögen (1)
- Seite (1)
- Shape (1)
- Shoulder (human) (1)
- Side (1)
- Simulator (driving) (1)
- Size and weight regulations (1)
- Skill (road user) (1)
- Skull (1)
- Social factors (1)
- Sociology (1)
- Sound (1)
- Sound level (1)
- Soziale Faktoren (1)
- Soziologie (1)
- Spain (1)
- Spanien (1)
- Spectrum (1)
- Spektrum (1)
- Sport utility vehicle (1)
- Spurrinne (1)
- Stadardization (1)
- Stand der Technik (Bericht) (1)
- Steuerung (1)
- Stoßstange (1)
- Strain gauge (1)
- Straße (1)
- Straßenentwurf (1)
- Straßenverkehr (1)
- Stress (1)
- Störfallentdeckung (1)
- Surface (1)
- Surface texture (1)
- Suspension (veh) (1)
- Tageslicht (1)
- Tangential (1)
- Technische Vorschriften (1)
- Technische Überwachung (1)
- Technische Überwachung (Fahrzeug) (1)
- Tests (1)
- Toter Winkel (1)
- Town centre (1)
- Toxicity (1)
- Toxizität (1)
- Traffic lanes (1)
- Traffic regulation (1)
- Traffic regulations (1)
- Traffic sign (1)
- Traffic signal (1)
- Trailer (1)
- Train (1)
- Transport (1)
- Transport infrastructure (1)
- Trunkenheit (1)
- Typenzulassung (1)
- Tätigkeitsbericht (1)
- USA (1)
- Umwelt (1)
- Underride prevention (1)
- Unfalldaten (1)
- Unfallneigung (1)
- United Kingdom (1)
- Vehicle Regulations (1)
- Vehicle lighting (1)
- Vehicle mile (1)
- Vehicle regulation (1)
- Vehicle spacing (1)
- Veraenderung (1)
- Vereinigtes Königreich (1)
- Verkehrsinfrastruktur (1)
- Verkehrswirtschaft (1)
- Verkehrszeichen (1)
- Vibration (1)
- Video camera (1)
- Vision (1)
- Vorn (1)
- Vorne (1)
- Warnung (1)
- Wear (1)
- Weather (1)
- Werbung (1)
- Wet road (1)
- Windschutzscheibe (1)
- Windscreen (veh) (1)
- Winkel (1)
- Wirkungsanalyse (1)
- Wirtschaftlichkeit (1)
- Witterung (1)
- Woman (1)
- Zentrale Verkehrssteuerung (1)
- Zug (Eisenbahn) (1)
- Zukünftiges Verkehrsmittel (1)
- Zusammendrückung (1)
- Öffentlicher Verkehr (1)
- Überdeckung (1)
Institut
The ASSESS project is a collaborative project that develops test procedures for pre-crash safety systems like Automatic Emergency Braking (AEB). One key criterion for the effectiveness of e.g. AEB is reduction in collision speed compared to baseline scenarios without AEB. The speed reduction for a given system can only be determined in real world tests that will end with a collision. Soft targets that are crashable up to velocities of 80 km/h are state of the art for these assessments, but ordinary balloon cars are usually stationary targets. The ASSESS project goes one step further and defines scenarios with moving targets. These scenarios define vehicle speeds of up to 100 km/h, different collision scenarios and relative collision speeds of up to 80km/h. This paper describes the development of a propulsion system for a soft target that aims to be used with these demanding scenario specifications. The Federal Highway Research Institute- (BASt-) approach to move the target is a self-driving small cart. The cart is controlled either by a driver (open-loop control via remote-control) or by a computer (closed-loop control). Its weight is limited to achieve a good crashability without damages to the test vehicle. To the extent of our knowledge BASt- approach is unique in this field (other carts cannot move at such high velocities or are not crashable). This paper describes in detail the challenges and solutions that were found both for the mechanical construction and the implementation of the control and safety system. One example for the mechanical challenges is e.g. the position of the vehicle- center of gravity (CG). An optimum compromise had to be found between a low CG oriented to the front of the vehicle (good for driveability) and a high CG oriented to the rear of the vehicle (good for crashability). The soft target itself which is also developed within the ASSESS project will not be covered in detail as this is work of a project partner. Publications on this will follow. The paper also shows first test results, describes current limitations and gives an outlook. It is expected that the presented test tools for AEB and other pre-crash safety systems is introduced in the future into consumer testing (NCAP) as well as regulatory testing.
Thoracic injury is one of the predominant types of severe injuries in frontal accidents. The assessment of the injury risk to the thorax in the current frontal impact test procedures is based on the uni-axial chest deflection measured in the dummy Hybrid III. Several studies have shown that criteria based on the linear chest potentiometer are not sensitive enough to distinguish between different restraint systems, and cannot indicate asymmetric chest loading, which has been shown to correlate to increased injury risk. Furthermore, the measurement is sensitive to belt position on the dummy chest. The objective of this study was to evaluate the optical multipoint chest deflection measurement system "RibEye" in frontal impact sled tests. Therefore the sensitivity of the RibEyesystem to different restraint system parameters was investigated. Furthermore, the issue of signal drop out at the 6 th rib was investigated in this study.A series of sled tests were conducted with the RibEye system in the Hybrid III 50%. The sled environment consisted of a rigid seat and a standard production three-point seat belt system. Rib deflections were recorded with the RibEye system and additionally with the standard chest potentiometer. The tests were carried out at crash pulses of two different velocities (30 km/h and 64 km/h). The tests were conducted with different belt routing to investigate the sensitivity of chest deflection measurements to belt position on the dummy chest. Furthermore, different restraint system parameters were investigated (force limiter level, with or without pretensioning) to evaluate if the RibEye measurements provide additional information to distinguish between restraint system configurations . The results showed that with the RibEye system it was possible to identify the effect of belt routing in more detail. The chest deflections measured with the standard chest potentiometer as well as the maximum deflection measured by RibEye allowed the distinction to be made between different force limiter levels. The RibEye system was also able to clearly show the asymmetric deflection of the rib cage due to belt loading. In some configurations, differences of more than 15 mm were observed between the left and side areas of the chest. Furthermore, the abdomen insert was identified as source of the problem of signal drop out at the 6th rib. Possible solutions are discussed. In conclusion, the RibEye system provided valuable additional information regarding the assessment of restraint systems. It has the potential to enable the evaluation of thoracic injury risk due to asymmetric loading. Further investigations with the RibEye should be extended to tests in a vehicle environment, which include a vehicle seat and other restraint system components such as an airbag.
A flexible pedestrian legform impactor (FlexPLI) has been evaluated by a Technical Evaluation Group (Flex-TEG) of the Working Party on Passive Safety (GRSP) of the United Nations Economic Commission for Europe (UN-ECE). It will be implemented within phase 2 of the global technical regulation (GTR 9) as well as within a new ECE regulation on pedestrian safety as a test tool for the assessment of lower extremity injuries in lateral vehicle-to-pedestrian accidents (UN-ECE 2010-1, 2010-2 and 2010-3). Due to its biofidelic properties in the knee and tibia section, the FlexPLI is found to having an improved knee and tibia injury assessment ability when being compared to the current legislative test tool, the lower legform impactor developed by the Pedestrian Safety Working Group of the European Enhanced Vehicle-safety Committee (EEVC WG 17). However, due to a lack of biofidelity in terms of kinematics and loadings in the femur part of the FlexPLI, an appropriate assessment of femur injuries is still outstanding. The study described in this paper is aimed to close this gap. Impactor tests with the FlexPLI at different impact heights on three vehicle frontends with Sedan, SUV and FFV shape are performed and compared to tests with a modified FlexPLI with upper body mass. Full scale validation tests using a modified crash test dummy with attached FlexPLI that are carried out for the first time prove the more humanlike responses of the femur section with applied upper body mass. Apart from that they also show that the impact conditions described in the current technical provisions for tests with the FlexPLI don"t necessarily compensate the missing torso mass in terms of knee and tibia loadings either. Therefore it can be concluded that an applied upper body mass will contribute to a more biofidelic overall behavior of the legform and subsequently an improved injury assessment ability of all lower extremity injuries addressed by the FlexPLI. Nevertheless, the validity of the original as well as the modified legform for tests against vehicles with extraordinary high bumpers as well as flat front vehicles still needs to be evaluated in detail. A first clue is given by the application of an additional accelerometer to the legform.
To improve vehicle safety in frontal collisions, the crash compatibility between the colliding vehicles is crucial. Compatibility aims to improve both the self and partner protection properties of vehicles. Although compatibility has received worldwide attention for many years, no final assessment approach has been defined. Within the Frontal Impact and Compatibility Assessment Research (FIMCAR) project, different frontal impact test procedures (offset deformable barrier [ODB] test as currently used for Economic Commission for Europe [ECE] R94, progressive deformable barrier test as proposed by France for a new ECE regulation, moveable deformable barrier test as discussed worldwide, full-width rigid barrier test as used in Federal Motor Vehicle Safety Standard [FMVSS] 208, and full-width deformable barrier test) were analyzed regarding their potential for future frontal impact legislation. The research activities focused on car-to-car frontal impact accidents based on accident investigations involving newer cars. Test procedures were developed with both a crash test program and numerical simulations. The proposal from FIMCAR is to use a full-width test procedure with a deformable element and compatibility metrics in combination with the current offset test as a frontal impact assessment approach that also addresses compatibility. By adding a full-width test to the current ODB test it is possible to better address the issues of structural misalignment and injuries resulting from high acceleration accidents as observed in the current fleet. The estimated benefit ranges from a 5 to 12 percent reduction of fatalities and serious injuries resulting from frontal impact accidents. By using a deformable element in the full-width test, the test conditions are more representative of real-world situations with respect to acceleration pulse, restraint system triggering time, and deformation pattern of the front structure. The test results are therefore expected to better represent real-world performance of the tested car. Furthermore, the assessment of the structural alignment is more robust than in the rigid wall test.
Aus wissenschaftlichen Untersuchungen ist bekannt, dass ältere Menschen trotz ihrer langen Fahrerfahrung in spezifischen Verkehrssituationen Fahrfehler und Unsicherheiten zeigen. In zwei Experimenten an jüngeren und älteren Versuchsteilnehmern wurde im Ergonomie-Labor der Bundesanstalt für Straßenwesen (BASt) versucht, den Ursachen spezifischer Fahrfehler älterer Kraftfahrer nachzugehen. Die Ergebnisse lieferten wichtige Ansatzpunkte für die Entwicklung von Fahrerassistenzsystemen (FAS), indem Erkenntnisse zu visuellen Aufmerksamkeitsleistungen gesammelt wurden. Im Rahmen eines Doppeltätigkeitsparadigmas wurde der visuell-räumliche Aufmerksamkeitsprozess, der für das Führen von Kraftfahrzeugen von wesentlicher Bedeutung ist, nicht nur auf der Verhaltensebene, sondern auch neurophysiologisch durch die Ableitung der Hirnströme mittels EEG untersucht. Hauptaufgabe war in beiden Experimenten eine Spurhalteaufgabe, die kurvenreiches Fahren simulieren sollte. Nebenaufgabe war jeweils eine Lichtreizaufgabe, bei der so schnell wie möglich durch Tastendruck auf einen Lichtreiz reagiert werden musste. Im zweiten Experiment wurde überprüft, ob bei der Lichtreizaufgabe die Verschlechterung der Aufmerksamkeitsleistung graduell erfolgt, indem bei den Lichtreizen die Exzentrizität erweitert wurde. Die Reize wurden bilateral, in abgestufter Form in verschiedenen Sehwinkeln von der Fovea centralis präsentiert. Dargestellt werden die Versuchsdurchführung sowie die Ergebnisse für die Verhaltensdaten und die festgestellten ereigniskorrelierten Potenziale (EKP). Es zeigte sich, dass durch die Berücksichtigung zusätzlicher weiterer Exzentrizitäten die Ergebnisse der Vorgängerstudie in bedeutsamer Weise erweitert werden konnten. Für beide Gruppen zeigten sich über den Verlauf hinweg klare Anzeichen für den Verlauf kompensatorischer Prozesse, die sich für die Älteren aber nur bis zu einem Sehwinkel von 50 Grad darstellten. Bei Reizen im Sehwinkel von 60 Grad war die Detektionsleistung deutlich schlechter, vor allem bei den älteren Versuchsteilnehmern. Außerdem wurde festgestellt, dass vor allem die Älteren Beeinträchtigungen in der Detektionsleistung zeigen, wenn der Abstand zwischen zwei Reizen gering ist. Es zeigt sich, das im Hinblick auf das Übersehen von Verkehrsobjekten, das eine wesentliche Ursache von Unfällen älterer Fahrer darstellt, diese technisch - beispielsweise bei Wende- oder Abbiegeprozessen - durch einen Sehfeldassistenten unterstützt werden können. Da Ältere durch schnelle Reaktionsabfolgen stärker beansprucht werden, sind Systeme mit Warnfunktion oder teilautomatisierte Systeme eher kritisch zu sehen, da sie zusätzlichen Bedien- beziehungsweise Überwachungsaufwand erfordern.
Economic constraints nowadays require transporting greater volumes of freight at lower cost. Yet, physical profiles of trucks do not all generate the same effects on road infrastructure for a given tonnage hauled. The objective then lies in finding an optimal service level that reduces the damage caused to infrastructure. Results derived for the impact of trucks on pavements are presented. The impact of truck traffic trends on road bridges will also be discussed.rn
Das Ziel der Untersuchung war, die Grenzen der Belastbarkeit eines Rollstuhl- und Personenrückhaltesystems mit Kraftknoten nach DIN 75078-2 zu ermitteln. Dazu wurden dynamische Schlittenversuche durchgeführt, bei denen die Verzögerungspulse sowie das Gesamtgewicht von Rollstuhl und Prüfpuppe variiert wurden. Für die Untersuchungen kamen ein Prüfrollstuhl, definiert nach ISO 10542, und Rückhaltesysteme mit Kraftknoten gemäß DIN 75078-2 zum Einsatz. Das Rückhaltesystem bestand aus einem Rollstuhl- und einem Personenrückhaltesystem, wobei das Rollstuhlrückhaltesystem (RRS) mit vier bzw. sechs Gurten und entsprechenden Retraktoren an einem dynamischen Schlittenaufbau befestigt wurde. Das Personenrückhaltesystem (PRS) bestand aus einem am Rollstuhl integrierten Beckengurt sowie einem Schulterschräggurt, der am Beckengurt und am Schlittenaufbau befestigt wurde. Ferner wurden bei den Versuchen Prüfpuppen verschiedener Alters- und Gewichtsklassen (P6, HIII 5 %, HIII 50 % und HIII 95 %) eingesetzt Die Belastungsanforderungen für das Rückhaltesystem wurden sukzessiv erweitert, indem einerseits das Gesamtgewicht (Rollstuhl und Prüfpuppe) und andererseits auch die Verzögerungspulse bis zur Versagensgrenze erhöht wurden. Das Vier-Gurt-Rückhaltesystem konnte bei einem Verzögerungspuls von 10 g einem Gesamtgewicht von bis zu 221 kg standhalten. Bei einem Verzögerungspuls von 20 g und einem Gesamtgewicht von 134 kg wurde das Vier-Gurt-System bis über die Grenzen belastet. Das Sechs-Gurt-Rückhaltesystem hat Belastungen bis 221 kg standgehalten. Infolgedessen ist bei einer Erhöhung der Verzögerungspulse auf 20 g und einem Gesamtgewicht von mehr als 109 kg ein Sechs-Gurt-System zu empfehlen.
The United Nations Economic Commission for Europe Informal Group on GTR No. 7 Phase 2 are working to define a build level for the BioRID II rear impact (whiplash) crash test dummy that ensures repeatable and reproducible performance in a test procedure that has been proposed for future legislation. This includes the specification of dummy hardware, as well as the development of comprehensive certification procedures for the dummy. This study evaluated whether the dummy build level and certification procedures deliver the desired level of repeatability and reproducibility. A custom-designed laboratory seat was made using the seat base, back, and head restraint from a production car seat to ensure a representative interface with the dummy. The seat back was reinforced for use in multiple tests and the recliner mechanism was replaced by an external spring-damper mechanism. A total of 65 tests were performed with 6 BioRID IIg dummies using the draft GTR No.7 sled pulse and seating procedure. All dummies were subject to the build, maintenance, and certification procedures defined by the Informal Group. The test condition was highly repeatable, with a very repeatable pulse, a well-controlled seat back response, and minimal observed degradation of seat foams. The results showed qualitatively reasonable repeatability and reproducibility for the upper torso and head accelerations, as well as for T1 Fx and upper neck Fx. However, reproducibility was not acceptable for T1 and upper neck Fz or for T1 and upper neck My. The Informal Group has not selected injury or seat assessment criteria for use with BioRID II, so it is not known whether these channels would be used in the regulation. However, the ramping-up behavior of the dummy showed poor reproducibility, which would be expected to affect the reproducibility of dummy measurements in general. Pelvis and spine characteristics were found to significantly influence the dummy measurements for which poor reproducibility was observed. It was also observed that the primary neck response in these tests was flexion, not extension. This correlates well with recent findings from Japan and the United States showing a correlation between neck flexion and injury in accident replication simulations and postmortem human subjects (PMHS) studies, respectively. The present certification tests may not adequately control front cervical spine bumper characteristics, which are important for neck flexion response. The certification sled test also does not include the pelvis and so cannot be used to control pelvis response and does not substantially load the lumbar bumpers and so does not control these parts of the dummy. The stiffness of all spine bumpers and of the pelvis flesh should be much more tightly controlled. It is recommended that a method for certifying the front cervical bumpers should be developed. Recommendations are also made for tighter tolerance on the input parameters for the existing certification tests.
The strong prevalence of human error as a crash causation factor in motorcycle accidents calls for countermeasures that help tackling this issue. Advanced rider assistance systems pursue this goal, providing the riders with support and thus contributing to the prevention of crashes. However, the systems can only enhance riding safety if the riders use them. For this reason, acceptance is a decisive aspect to be considered in the development process of such systems. In order to be able to improve behavioural acceptance, the factors that influence the intention to use the system need to be identified. This paper examines the particularities of motorcycle riding and the characteristics of this user group that should be considered when predicting the acceptance of advanced rider assistance systems. Founded on theories predicting behavioural intention, the acceptance of technologies and the acceptance of driver support systems, a model on the acceptance of advanced rider assistance systems is proposed, including the perceived safety when riding without support, the interface design and the social norm as determinants of the usage intention. Since actual usage cannot be measured in the development stage of the systems, the willingness to have the system installed on the own motorcycle and the willingness to pay for the system are analyzed, constituting relevant conditions that allow for actual usage at a later stage. Its validation with the results from user tests on four advanced rider assistance systems allows confirming the social norm and the interface design as powerful predictors of the acceptance of ARAS, while the extent of perceived safety when riding without support did not have any predictive value in the present study.
Verschiedene Forschungsprojekte aus dem Bereich Kooperativer Systeme, die vor Kurzem gestartet sind, beschäftigen sich unter anderem mit den organisatorischen Aspekten einer Gesamtarchitektur. Eine Organisationsarchitektur beschreibt dabei die Rollen und Verantwortlichkeiten, die im Betrieb unterschiedlicher Kooperativer Anwendungen auftreten. In den Projekten erfolgt zumeist eine Betrachtung der Organisationsarchitektur anhand konkreter Implementierungsszenarien oder Use Cases. Der im Bericht dokumentierte aktuelle Stand der abstrakten Beschreibung der Rollen und Verantwortlichkeiten soll den Projekten und Initiativen als Diskussionsgrundlage und Ausgangspunkt für die Erarbeitung einer möglichen Organisationsarchitektur Kooperativer Systeme und deren Ausgestaltung dienen.
Although the bus belongs to the safest traffic means, single accidents can be particularly severe and concern many passengers. Especially in case of fires a high number of injured and killed persons can be the outcome. Fire safety of buses therefore is of high importance. With the increase of synthetic and plastic materials as a material for the interior equipment of buses and coaches because of their ood mechanical properties combined with low weight, the question arises whether the safety level has decreased in case of a fire during the last years - also compared to other means of transport. Because of the combustible plastics and their ability to release a high amount of heat the main fire load in buses is no longer the fuel but the plastic materials which are also often easy to ignite. Besides the flammability of the equipments, the production of smoke, the smoke development and propagation and its toxicity for the people as well as the testing methods and limit values are of interest. For those reasons research projects were initiated on behalf of the German Federal Highway Research Institute. At the one hand the fire behavior of coach interiors was examined in general focusing on fire propagation as well as fire detection and signalling. As result, recommendations with regard to early fire detection systems for the engine compartments and on-board extinguishing equipment were elaborated. At the other hand research is carried out to examine heat release, smoke, smoke propagation and its toxicity due to burning bus interior materials. The paper describes which effective and economically reasonable fire safety requirements for interiors of buses would improve the current situation. Proposals for amendments of current requirements are recommended including the specification of appropriate limit values. In particular, it is taken into consideration which reasonable fire safety standards from other transport sectors, especially the rail sector, should be transferred to buses.
Die UNECE Regelung R58 regelt die Beschaffenheit und die Installation von Heckunterfahrschutzsystemen an schweren Güterkraftfahrzeugen, deren Ziel die Verbesserung der Kompabilität zwischen Pkw-Frontstrukturen und Lkw-Hecks ist. Dennoch verunglücken laut amtlicher Unfallstatistik allein in Deutschland rund 30 Pkw-Insassen in Heckauffahrunfällen auf Lkw tödlich, da diese Vorrichtungen hinsichtlich Einbauhöhe und Steifigkeit den Anforderungen des realen Unfallgeschehens nicht genügen. Das Ziel dieser Studie ist eine quantitative Abschätzung der möglichen Reduzierung der Verletzungsschwere mit Hilfe eines statistischen Modells, die durch eine Anpassung der geltenden Bestimmungen und die damit verbundenen technischen Veränderungen des bereits vorgeschriebenen Heckunterfahrschutzes zu erreichen wäre. In einer Nutzen-Kosten-Analyse wird die Wirtschaftlichkeit dieser Modifizierungen mit einem idealen Notbremsassistenten verglichen. Die Untersuchung orientiert sich dabei an den aktuell in der UN-ECE WP29/GRSG in Genf diskutierten Vorschlägen zur Anpassung der ECE-R58. Das verwendete ordinale Probit-Modell stellt einen Zusammenhang zwischen der Verletzungsschwere im auffahrenden PKW und erklärenden Größen her, in diesem Fall der kinetischen Energie des unterfahrenden Pkws und der strukturellen lnteraktion zwischen Lkw-Heck und Pkw-Front. Diese Maßnahmen könnten demnach 53 - 78% der Getöteten sowie 27 - 49% der Schwerverletzten bei diesen Unfallkonstellationen reduzieren, was pro Jahr 20 Getöteten und 95 Schwerverletzten entsprechen würde. Somit würde eine Modifikation einer bestehenden passiven Schutzmaßnahme an jährlich 100.000 neuzugelassenen Lkw und Anhängern bereits 20 Getötete adressieren. Im Vergleich dazu müssten jährlich 3 Millionen Pkw mit zusätzlicher Sensorik und Aktuatorik für einen idealen Notbremsassistenten ausgestattet werden, um im Idealfall alle Heckauffahrunfälle von Pkw auf andere Pkw oder Lkw und damit 53 Getötete zu vermeiden. Daher fällt auch das Nutzen-Kosten-Verhältnis deutlich zugunsten des verbesserten Heckunterfahrschutzes aus.
Within the automotive context camera monitor systems (CMS) can be used to present views of the traffic situation behind the vehicle to the driver via a monitor mounted inside the cabin. This offers the opportunity to replace classical outside rearview mirrors and therefore to implement new design concepts, aerodynamically optimized vehicle shapes and to reduce the width of the vehicle. Further, the use of a CMS offers the potential to implement functionalities like warnings or situation-adaptive fields of view that are not feasible with conventional rearview mirrors. Despite these potential advantages, it is important to consider the possible technical constraints of this technology and its effect on driver perception and behavior. On the technical side next to the field of view and die robustness of die system, aspects as its functionality at day and night as well as under varying weather conditions should be object to scientific investigation. Concerning human machine interaction, it has to be considered, that the perception of velocities and distances of approaching vehicles might be different for CMS as compared to conventional rearview mirrors and potential influences of factors as the Position of the displays or drivers' age should be taken into account. In order to shed light on these and further open issues, BASt is currently conducting a study that will cover the use of CMS under controlled conditions as well in real traffic. The first part of the study will focus on passenger cars, while in a second step the empirical investigation will be extended to heavy goods vehicles, where the potentials as well as the limitations of CMS might differ considerably. The presentation will cover the first part, with regard to the experimental design, implementation and initial results if already available.
The objective was to develop and validate a crash trolley (reference vehicle) equipped with a compartment and a full restraint system for driver and front seat passenger which can be used in full scale crash testing. Furthermore, the crash trolley should have a suspension to show rotation and nick effects similar to real vehicles. Within the development phase the reference vehicle was build based on a European family car. Special attention was needed to provide appropriate strength to the trolley and its suspension. The reference vehicle is equipped with a restraint system consisting of airbags, pedals, seats, dashboard, and windscreen. On the front of the vehicle different crash barriers can be installed to provide miscellaneous deceleration pulses. For the validation phase a series of low and high speed crash tests with HIII dummies were conducted and compared with full scale tests. For the comparison deceleration pulse, dummy numbers and vehicle movement were analyzed. Validation tests with velocities up to 60 km/h showed promising results. The compartment and the suspension systems stayed stable. Rotation effects were comparable with full scale car crash tests. The airbags and seat belt system worked reasonable. The acceleration pulse compared to an Euro NCAP test had a similar characteristic but was in general slightly lower. After the successful validation the reference vehicle is already in use in different studies in the field of vehicle safety research at BASt.
In Germany the number of casualties in passenger car to pedestrian crashes has been reduced by a considerable amount of 40% as regards fatalities and 25% with regard to seriously injured pedestrians since the year 2001. Similar trends can be seen in other European countries. The reasons for that positive development are still under investigation. As infrastructural or behavioral changes do in general take a longer time to be effective in real world, explanations related to improved active and passive safety of passenger vehicles can be more relevant in providing answers for this trend. The effect of passive pedestrian protection " specified by the Euro NCAP pedestrian test result " is of particular interest and has already been analyzed by several authors. However, the number of vehicles with some valid Euro NCAP pedestrian score (post 2002 rating) was quite limited in most of those studies. To overcome this problem of small datasets German National Accident Records have been taken to investigate a similar objective but now based on a much bigger dataset. The paper uses German National Accident Records from the years 2009 to 2011. In total 65.140 records of pedestrian to passenger car crashes have been available. Considering crash parameters like accident location (rural / urban areas) etc., 27.143 of those crashes have been classified to be relevant for the analysis of passive pedestrian safety. In those 27.143 records 7.576 Euro NCAP rated vehicles (post 2002 rating) have been identified. In addition it was possible to identify vehicles which comply with pedestrian protection legislation (2003/102/EG) where phase 1 came into force in October 2005. A significant correlation between Euro NCAP pedestrian score and injury outcome in real-life car to pedestrian crashes was found. Comparing a vehicle scoring 5 points and a vehicle scoring 22 points, pedestrians" conditional probability of getting fatally injured is reduced by 35% (from 0.58% to 0.37%) for the later one. At the same time the probability of serious injuries can be reduced by 16% (from 27.4% to 22.9%). No significant injury reducing effect, associated with the introduction of pedestrian protection legislation (phase 1) was detected. Considerable effects have also been identified comparing diesel and gasoline cars. Higher engine displacements are associated with a lower injury risk for pedestrians. The most relevant parameter has been "time of accident", whereas pedestrians face a more than 2 times higher probability to be fatally injured during night and darkness as compared to daytime conditions.
Within this paper different European accident data sources were used to investigate the causations and backgrounds of road traffic accidents with pedestrians. Analyses of high level national data and in-depth accident data from Germany and Great Britain was used to confirm and refine preliminary accident scenarios identified from other sources using a literature review. General observations made included that a high proportion of killed or seriously injured pedestrian casualties impacted by cars were in "dark" light conditions. Seven accident scenarios were identified (each divided into "daylight" and "dark" light conditions) which included the majority of the car front-to-pedestrian crash configurations. Test scenarios were developed using the identified accident scenarios and relevant parameters. Hypothetical parameters were derived to describe the performance of pedestrian pre-crash systems based on the assumption that these systems are designed to avoid false positives as a very high priority, i.e. at virtually all costs. As result, three "Base Test Scenarios" were selected to be developed in detail in the AsPeCSS project. However, further Enhanced Test Scenarios may be needed to address environmental factors such as darkness if it is determined that system performance is sensitive to these factors. Finally, weighting factors for the accident scenarios for Europe (EU-27) were developed by averaging and extrapolation of the available data. This paper represents interim results of Work Package 1 within the AsPeCSS project.
It is well known that most accidents with pedestrians are caused by the driver not being alert or misinterpreting the situation. For that reason advanced forward looking safety systems have a high potential to improve safety for this group of vulnerable road users. Active pedestrian protection systems combine reduction of impact speed by driver warning and/or autonomous braking with deployment of protective devices shortly before the imminent impact. According to the Euro NCAP roadmap the Autonomous Emergency Braking system tests for Pedestrians Protection will be set in force from 2016 onwards. Various projects and organisations in Europe are developing performance tests and assessment procedures as accompanying measures to the Euro NCAP initiative. To provide synthesised input to Euro NCAP so-called Harmonisation Platforms (HP-) have been established. Their main goal is to foster exchange of information on key subjects, thereby generating a clear overview of similarities and differences on the approaches chosen and, on that basis, recommend on future test procedures. In this paper activities of the Harmonisation Platform 2 on the development of Test Equipment are presented. For the testing targets that mimic humans different sensing technologies are required. A first set of specifications for pedestrian targets and the propulsion systems as collected by Harmonisation Platform 2 are presented together with a first evaluation for a number of available tools.
It is commonly agreed that active safety will have a significant impact on reducing accident figures for pedestrians and probably also bicyclists. However, chances and limitations for active safety systems have only been derived based on accident data and the current state of the art, based on proprietary simulation models. The objective of this article is to investigate these chances and limitations by developing an open simulation model. This article introduces a simulation model, incorporating accident kinematics, driving dynamics, driver reaction times, pedestrian dynamics, performance parameters of different autonomous emergency braking (AEB) generations, as well as legal and logical limitations. The level of detail for available pedestrian accident data is limited. Relevant variables, especially timing of the pedestrian appearance and the pedestrian's moving speed, are estimated using assumptions. The model in this article uses the fact that a pedestrian and a vehicle in an accident must have been in the same spot at the same time and defines the impact position as a relevant accident parameter, which is usually available from accident data. The calculations done within the model identify the possible timing available for braking by an AEB system as well as the possible speed reduction for different accident scenarios as well as for different system configurations. The simulation model identifies the lateral impact position of the pedestrian as a significant parameter for system performance, and the system layout is designed to brake when the accident becomes unavoidable by the vehicle driver. Scenarios with a pedestrian running from behind an obstruction are the most demanding scenarios and will very likely never be avoidable for all vehicle speeds due to physical limits. Scenarios with an unobstructed person walking will very likely be treatable for a wide speed range for next generation AEB systems.
Since integrated safety systems combine active and passive safety elements in one safety system, it is necessary to define new procedures to evaluate vehicle safety from the overall system point of view. The main goal of the ASSESS project is to develop harmonized and standardized assessment procedures for collision mitigation and avoidance systems. Methods and Data Sources: In ASSESS, procedures are developed for: driver behaviour evaluation, pre-crash system performance evaluation, crash performance evaluation, socio-economic assessment. This paper will concentrate on the activities related to the crash evaluation. The objective is to perform simulations, sled tests and crash tests in order tounderstand the influence of the activation of the pre-crash systems on the occupants" injuries during the crash phase. When a traffic accident is unavoidable, pre-crash systems work on various safety devices in order to improve the vehicle occupants" protection. Braking assistance and adaptive restraint systems are the main pre-crash systems whose effect on the occupants" protection will be described in this paper. Results: The results will be a description of the effect of the activation of the pre-crash systems on the crash phase. Additionally, a set of recommendations for future methodology developments will be delivered. Furthermore, a first approach to the study of the effect of the pre-crash systems activation on the occupants" protection when the impact is unavoidable will be presented. This effect will be quantified using the biomechanical values obtained from the simulation and testing activities and their related injury risks. Simulation and testing activities will consider the following scenarios: - No activation of any pre-crash system, - Activation of one or a combination of several pre-crash systems. In this way, differences in the results obtained from different scenarios will show the effect of each pre-crash system separately during the crash phase. Discussion and Limitations: The set of activities developed in this research project is limited by the fact that with the given resources only a limited number of vehicle models could be investigated. In addition, there are also limitations related to the injury risk curves and the passive safety tools currently on the market. Conclusion and Relevance to session submitted: The paper will present a complete analysis of the effect of pre-crash systems during the crash phase when the impact is unavoidable. Details, limitations and first application experience based on a few examples will be discussed. Currently, there is not any regulation, assessment program, or other similar official procedure able to assess pre-crash systems during the crash phase. This project comprises phases of traffic accidents which have been historically analysed separately, and aims to evaluate them taking into account their interrelationship. ASSESS is one of the first European projects which deals in depth with the concept of integrated safety, defining methodologies to analyse vehicle safety from a global point of view.
Thoracic injuries are one of the main causes of fatally and severely injured casualties in car crashes. Advances in restraint system technology and airbags may be needed to address this problem; however, the crash test dummies available today for studying these injuries have limitations that prevent them from being able to demonstrate the benefits of such innovations. THORAX-FP7 was a collaborative medium scale project under the European Seventh Framework. It focused on the mitigation and prevention of thoracic injuries through an improved understanding of the thoracic injury mechanisms and the implementation of this understanding in an updated design for the thorax-shoulder complex of the THOR dummy. The updated dummy should enable the design and evaluation of advanced restraint systems for a wide variety (gender, age and size) of car occupants. The hardware development involved five steps: 1) Identification of the dominant thoracic injury types from field data, 2) Specification of biomechanical requirements, 3) Identification of injury parameters and necessary instrumentation, 4) Dummy hardware development and 5) Evaluation of the demonstrator dummy. The activities resulted in the definition of new biofidelity and instrumentation requirements for an updated thorax-shoulder complex. Prototype versions were realised and implemented in three THOR dummies for biomechanical evaluation testing. This paper documents the hardware developments and biomechanical evaluation testing carried out.