Abteilung Fahrzeugtechnik
Filtern
Erscheinungsjahr
Dokumenttyp
- Konferenzveröffentlichung (97)
- Buch (Monographie) (49)
- Wissenschaftlicher Artikel (45)
- Arbeitspapier (13)
- Teil eines Buches (Kapitel) (5)
Sprache
- Englisch (106)
- Deutsch (101)
- Mehrsprachig (2)
Schlagworte
- Safety (77)
- Sicherheit (76)
- Fahrzeug (57)
- Vehicle (57)
- Bewertung (51)
- Deutschland (46)
- Germany (46)
- Anfahrversuch (45)
- Evaluation (assessment) (45)
- Impact test (veh) (42)
- Versuch (42)
- Test (40)
- Test method (38)
- Prüfverfahren (37)
- Conference (34)
- Konferenz (34)
- Unfall (32)
- Accident (30)
- Fußgänger (30)
- Pedestrian (30)
- Driver assistance system (27)
- Fahrerassistenzsystem (27)
- Forschungsbericht (27)
- Verletzung (27)
- Injury (26)
- Car (25)
- Research report (25)
- Dummy (22)
- Simulation (22)
- Anthropometric dummy (21)
- Pkw (21)
- Collision (20)
- Frontalzusammenstoß (20)
- Messung (20)
- Head on collision (19)
- Measurement (19)
- Zusammenstoß (18)
- Driver (17)
- Driver information (17)
- Fahrer (17)
- Fahrerinformation (17)
- Fahrzeugführung (17)
- Gesetzgebung (17)
- Kompatibilität (17)
- Legislation (17)
- Method (17)
- Passives Sicherheitssystem (17)
- Verfahren (17)
- Compatibility (16)
- Head (16)
- Kopf (16)
- Passive safety system (16)
- Analyse (math) (15)
- Analysis (math) (15)
- Europa (15)
- Europe (15)
- Biomechanik (14)
- Driving (veh) (14)
- Shock (14)
- Unfallverhütung (14)
- Accident prevention (13)
- Biomechanics (13)
- Child (13)
- Development (13)
- Entwicklung (13)
- Improvement (13)
- Insasse (13)
- Kind (13)
- Radfahrer (13)
- Research project (13)
- Schlag (13)
- Schweregrad (Unfall, Verletzung) (13)
- Vehicle occupant (13)
- Verbesserung (13)
- injury) (13)
- Ausrüstung (12)
- Equipment (12)
- Forschungsarbeit (12)
- Lkw (12)
- Lorry (12)
- Motorrad (12)
- Severity (accid, injury) (12)
- Technische Vorschriften (Kraftfahrzeug) (12)
- Verletzung) (12)
- Wirtschaftlichkeitsrechnung (12)
- Automatic (11)
- Automatisch (11)
- Cost benefit analysis (11)
- Cyclist (11)
- Motorcycle (11)
- Perception (11)
- Prevention (11)
- Schweregrad (Unfall (11)
- Standardisierung (11)
- Vehicle regulations (11)
- Wahrnehmung (11)
- Active safety system (10)
- Aktives Sicherheitssystem (10)
- Behaviour (10)
- Communication (10)
- Elektronische Fahrhilfe (10)
- Kommunikation (10)
- Leistungsfähigkeit (allg) (10)
- Seitlicher Zusammenstoß (10)
- Severity (accid (10)
- Side impact (10)
- Statistik (10)
- Technologie (10)
- Technology (10)
- Verhalten (10)
- Autonomes Fahren (9)
- Autonomous driving (9)
- Belastung (9)
- Bemessung (9)
- Decrease (9)
- Design (overall design) (9)
- EU (9)
- Efficiency (9)
- Electronic driving aid (9)
- Ergonomics (9)
- Fahrstabilität (9)
- Geschwindigkeit (9)
- Load (9)
- Reifen (9)
- Speed (9)
- Tyre (9)
- Vehicle handling (9)
- Verminderung (9)
- Bremsung (8)
- Brustkorb (8)
- Error (8)
- Fahrzeuginnenraum (8)
- Fehler (8)
- Interior (veh) (8)
- Safety belt (8)
- Sicherheitsgurt (8)
- Standardization (8)
- Thorax (8)
- Traffic (8)
- Verhütung (8)
- Verkehr (8)
- Verkehrssteuerung (8)
- Braking (7)
- Knee (human) (7)
- Motorcyclist (7)
- Motorradfahrer (7)
- Prüfstand (7)
- Richtlinien (7)
- Risiko (7)
- Risk (7)
- Specifications (7)
- Statistics (7)
- Test rig (7)
- Traffic control (7)
- Aufprallschlitten (6)
- Collision avoidance system (6)
- Crash helmet (6)
- Datenbank (6)
- Deformation (6)
- Deformierbare Barriere (Anpralltest) (6)
- Emission (6)
- Ergonomie (6)
- Fatality (6)
- Fuel consumption (6)
- Gewicht (6)
- Impact sled (6)
- Impact test (6)
- Intelligent transport system (6)
- Kraftstoffverbrauch (6)
- Lenken (Fahrzeug) (6)
- Modification (6)
- Norm (tech) (6)
- Reaction (human) (6)
- Reaktionsverhalten (6)
- Schutzhelm (6)
- Specification (standard) (6)
- Steering (process) (6)
- Telematics (6)
- Telematik (6)
- Tödlicher Unfall (6)
- Warning (6)
- Weight (6)
- Airbag (5)
- Alte Leute (5)
- Antikollisionssystem (5)
- Auffahrunfall (5)
- Database (5)
- Electric vehicle (5)
- Elektrofahrzeug (5)
- Human body (5)
- International (5)
- Knie (menschl) (5)
- Layout (5)
- Leg (human) (5)
- Market (5)
- Markt (5)
- Messgerät (5)
- Official approval (5)
- Rear end collision (5)
- Sensor (5)
- Unfallrekonstruktion (5)
- Verformung (5)
- Veränderung (5)
- Accident rate (4)
- Bein (menschl) (4)
- Benutzung (4)
- Body (car) (4)
- Brennstoffzelle (4)
- Decke (Straße) (4)
- Deformable barrier (impact test) (4)
- Fahrzeugsitz (4)
- Fuel cell (4)
- Gestaltung (4)
- Headlamp (4)
- Hybrid vehicle (4)
- Hybridfahrzeug (4)
- Industrie (4)
- Industry (4)
- Intelligentes Transportsystem (4)
- Karosserie (4)
- Kraftfahrzeug (4)
- Lärm (4)
- Menschlicher Körper (4)
- Nachfrage (4)
- Nacht (4)
- Night (4)
- Noise (4)
- Oberfläche (4)
- Old people (4)
- Reconstruction (accid) (4)
- Reproducibility (4)
- Reproduzierbarkeit (4)
- Scheinwerfer (4)
- Seat (veh) (4)
- Straßenverkehrsrecht (4)
- Surface (4)
- Surfacing (4)
- Transport infrastructure (4)
- Unfallhäufigkeit (4)
- Use (4)
- Verkehrsinfrastruktur (4)
- Visual display (4)
- Abstandsregeltempomat (3)
- Adaptive cruise control (3)
- Air bag (restraint system) (3)
- Aktive Sicherheit (3)
- Ankündigung (3)
- Anthropmetric dummy (3)
- Antrieb (tech) (3)
- Apparatus (measuring) (3)
- Behinderter (3)
- Bicycle (3)
- Bildschirm (3)
- Brake light (3)
- Bremslicht (3)
- Bruch (mech) (3)
- Carriageway (3)
- Classification (3)
- Datenübertragung (telekom) (3)
- Daylight (3)
- Demand (3)
- Detection (3)
- Detektion (3)
- Disabled person (3)
- Driving aptitude (3)
- Emergency (3)
- Empfindlichkeit (3)
- Fahrbahn (3)
- Fahrrad (3)
- Fahrtauglichkeit (3)
- Fahrzeugbeleuchtung (3)
- Failure (3)
- Freight transport (3)
- Front (3)
- Haftung (jur) (3)
- Halswirbel (3)
- Highway (3)
- Impact study (3)
- Increase (3)
- Information (3)
- Interface (3)
- Kamera (3)
- Klassifizierung (3)
- Leuchtdichte (3)
- Liability (3)
- Luminance (3)
- Mathematical model (3)
- Medical examination (3)
- Mensch Maschine Verhältnis (3)
- Notfall (3)
- On the spot accident investigation (3)
- Optimum (3)
- Organisation (3)
- Propulsion (3)
- Prototyp (3)
- Prototype (3)
- Rear view mirror (3)
- Rechenmodell (3)
- Road user (3)
- Rolling resistance (3)
- Rollwiderstand (3)
- Rückspiegel (3)
- Sensitivity (3)
- Severity (acid (3)
- Sichtbarkeit (3)
- Straße (3)
- Tageslicht (3)
- Telecommunication (3)
- Telekommunikation (3)
- Traffic regulations (3)
- Unterfahrschutz (3)
- Untersuchung am Unfallort (3)
- Vehicle inspection (3)
- Vehicle lighting (3)
- Vergrößerung (3)
- Verkehrsteilnehmer (3)
- Versuchspuppe (3)
- Sichtbarkeit (3)
- Warnung (3)
- Windschutzscheibe (3)
- Windscreen (veh) (3)
- Wirbelsäule (3)
- Abblendlicht (2)
- Abdomen (2)
- Ablenkung (psychol) (2)
- Acceleration (2)
- Achslast (2)
- Active safety (2)
- Adolescent (2)
- Adult (2)
- Anti locking device (2)
- Articulated vehicle (2)
- Attention (2)
- Attitude (psychol) (2)
- Aufmerksamkeit (2)
- Autobahn (2)
- Autonomes Fahrzeug (2)
- Autonomous vehicle (2)
- Axle load (2)
- Baumusterzulassung (2)
- Baustelle (2)
- Beschleunigung (2)
- Bestrafung (2)
- Bicyclist (2)
- Blendung (2)
- Blind spot (veh) (2)
- Bridge (2)
- Brücke (2)
- Buch (2)
- Bumper (2)
- Camera (2)
- Car park (2)
- Cause (2)
- Cervical vertebrae (2)
- Comfort (2)
- Construction site (2)
- Contact (tyre road) (2)
- Control (2)
- Crash Test (2)
- Crashtest (2)
- Damage (2)
- Data acquisition (2)
- Data exchange (2)
- Data processing (2)
- Data transmission (telecom) (2)
- Datenaustausch (2)
- Datenerfassung (2)
- Datenverarbeitung (2)
- Dauerhaftigkeit (2)
- Deceleration (2)
- Deckschicht (2)
- Delivery vehicle (2)
- Digital model (2)
- Dipped headlight (2)
- Distraction (2)
- Durability (2)
- Echtzeit (2)
- Einstellung (psychol) (2)
- Elektronisches Stabilitätsprogramm (2)
- Erwachsener (2)
- Evaluation (2)
- Eye movement (2)
- Fahrgeschicklichkeit (2)
- Fahrleistung (2)
- Fahrsimulator (2)
- Fahrzeugabstand (2)
- Fahrzeugteile (2)
- Force (2)
- Forecast (2)
- Future transport mode (2)
- Gelenkfahrzeug (2)
- Glare (2)
- Grenzfläche (2)
- Griffigkeit (2)
- Gütertransport (2)
- Güterverkehr (2)
- Herstellung (2)
- Hinten (2)
- Hospital (2)
- Hüfte (menschl) (2)
- Individueller Verkehr (2)
- Information documentation (2)
- Intelligentes Verkehrssystem (2)
- Interactive model (2)
- Interaktives Modell (2)
- Interview (2)
- Jugendlicher (2)
- Knie (2)
- Knotenpunkt (2)
- Komfort (2)
- Kontakt Reifen-Straße (2)
- Kontrolle (2)
- Kraft (2)
- Krankenhaus (2)
- Kunststoff (2)
- Landstraße (2)
- Lichtsignal (2)
- Manufacture (2)
- Medical aspects (2)
- Medizinische Untersuchung (2)
- Mobility (2)
- Mobilität (2)
- Modell (2)
- Motorway (2)
- Nasse Straße (2)
- Numerisches Modell (2)
- Oberflächentextur (2)
- Organization (association) (2)
- Parkfläche (2)
- Penalty (2)
- Planning (2)
- Planung (2)
- Plastic material (2)
- Private transport (2)
- Prognose (2)
- Quality (2)
- Qualität (2)
- Radio (2)
- Real time (2)
- Rear (2)
- Reifenprofil (2)
- Road traffic (2)
- Rundfunk (2)
- Sachschaden (2)
- Safety glass (2)
- Sample (mater) (2)
- Schallpegel (2)
- Schutz (2)
- Sehvermögen (2)
- Sicherheitsglas (2)
- Simulator (driving) (2)
- Skidding resistance (2)
- Sound level (2)
- Spinal column (2)
- State of the art report (2)
- Steuerung (2)
- Stoßstange (2)
- Straßenverkehr (2)
- Stress (psychol) (2)
- Surface texture (2)
- Surveillance (2)
- Technische Überwachung (Fahrzeug) (2)
- Textbook (2)
- Toter Winkel (2)
- Traffic signal (2)
- Tyre tread (2)
- Underride protection (2)
- Unterleib (2)
- Ursache (2)
- Vehicle mile (2)
- Vehicle spacing (2)
- Vereinigtes Königreich (2)
- Verzögerung (2)
- Vibration (2)
- Vision (2)
- Vorn (2)
- Wearing course (2)
- Wet road (2)
- Wirksamkeitsuntersuchung (2)
- Zukünftiges Verkehrsmittel (2)
- Zulassung (tech) (2)
- Zusammenstoss (2)
- (menschl) (1)
- Abbiegen (1)
- Ablenkung (1)
- Abnutzung (1)
- Absorption (1)
- Accessibility (1)
- Accident data (1)
- Accident proneness (1)
- Accident reconstruction (1)
- Administration (1)
- Aged people (1)
- Alte leute (1)
- Alternative Energie (1)
- Alternative energy (1)
- Angle (1)
- Anhänger (1)
- Anordnung (1)
- Anthropometric body (1)
- Antiblockiereinrichtung (1)
- Antiblockiersystem (1)
- Antikollisisonssystem (1)
- Apparatus (measurement) (1)
- Apparatus [measuring] (1)
- Aquaplaning (1)
- Arbeitsgruppe (1)
- Area traffic control (1)
- Armaturenbrett (1)
- Arzneimittel (1)
- Asphaltstraße (Oberbau) (1)
- Aufprall (1)
- Augenbewegungen (1)
- Auspuff (1)
- Ballungsgebiet (1)
- Battery (1)
- Bau (1)
- Beanspruchung (1)
- Bearing capacity (1)
- Bein (1)
- Benchmark (1)
- Benefit cost analysis (1)
- Berechnung d Straßenoberbaus (1)
- Betriebsverhalten (1)
- Bibliographie (1)
- Bibliography (1)
- Biophysic (1)
- Bonnet (car) (1)
- Brake (1)
- Breaking (1)
- Breite (1)
- Bremse (1)
- Bus (1)
- Cadaver (1)
- Calibration (1)
- Carbon dioxide (1)
- Carbon monoxide (1)
- Catalysis (1)
- Cervical vertebrae; Conference; Evaluation (assessment); Injury; Spinal column; Test (1)
- Chart (1)
- Chassis (1)
- Cinematography (1)
- Coefficient of friction (1)
- Colour (1)
- Compatiblity (1)
- Components of the car (1)
- Components of the vehicle (1)
- Compression (1)
- Congestion (traffic) (1)
- Construction (1)
- Contact (Tyre road) (1)
- Conurbation (1)
- Cooperative intelligent transport system (1)
- Correlation (math, stat) (1)
- Corrosion (1)
- Crossing the road (pedestrian) (1)
- Dashboard (1)
- Data bank (1)
- Data security (1)
- Data transmission (1)
- Datensicherheit (1)
- Daytime running light (1)
- Deformable barrier (Impact test) (1)
- Deformable barrier system (impact test) (1)
- Dehnungsmessstreifen (1)
- Demand (econ) (1)
- Demografie (1)
- Demographie (1)
- Demography (1)
- Depth (1)
- Detection response task (1)
- Deterioration (1)
- Diesel engine (1)
- Dieselmotor (1)
- Dimension (1)
- Dispersion (stat) (1)
- Dissertation (1)
- Disstraction (1)
- Driver (veh) (1)
- Driver information system (1)
- Driver training (1)
- Driving (1)
- Druck (1)
- Drunkenness (1)
- Dusk (1)
- Dynamic penetration test (1)
- Dynamics (1)
- Dynamik (1)
- Dynamo (1)
- Dämmerung (1)
- EU directive (1)
- EU-Richtlinie (1)
- Economic efficiency (1)
- Economics of transport (1)
- Eichung (1)
- Eigenschaft (1)
- Eindringung (1)
- Electrode (1)
- Electroencephalography (1)
- Electronic stability program (1)
- Electronics (1)
- Elekronic stability program (1)
- Elektrode (1)
- Elektroencephalographie (1)
- Elektronik (1)
- Emission control (1)
- Emissionskontrolle (1)
- Energieeinsparung (1)
- Energy conservation (1)
- Engine capacity (1)
- Environment (1)
- Erfahrung [menschl] (1)
- Ersatzfahraufgabe (1)
- European New Car Assessment Programme (1)
- Evaluation (Assessment) (1)
- Evaluation [assessment] (1)
- Exhaust pipe (1)
- Experience [human] (1)
- Expert system (1)
- Expertensystem (1)
- Fahrassistenzsystem (1)
- Fahrausbildung (1)
- Fahrbahnmarkierung (1)
- Fahrbahnüberquerung (1)
- Fahrbare Barriere (1)
- Fahrerinformationssystem (1)
- Fahrstreifen (1)
- Fahrstreifenwechsel (1)
- Fahrwerk (1)
- Farbe (1)
- Fatigue (human) (1)
- Federal Republic of (1)
- Federung (1)
- Fernverkehrsstraße (1)
- Festigkeit (1)
- Feuer (1)
- Feuerlöscher (1)
- Film (Filmtechnik) (1)
- Finite element method (1)
- Fire (1)
- Fire extinguisher (1)
- Flexible pavement (1)
- Foot (not a measure) (1)
- Form (1)
- France (1)
- Frankreich (1)
- Frau (1)
- Freizeit (1)
- Frequency (1)
- Frequenz (1)
- Frost (1)
- Fuel (1)
- Fuß (1)
- Fußgängerbereich (1)
- Gebiet (1)
- Gebraucht (1)
- Gelände (1)
- Geländefahrzeug (1)
- Gierverhalten (1)
- Goods traffic (1)
- Graphische Darstellung (1)
- Grenzwert (1)
- Harmonisation (1)
- Harmonisierung (1)
- Harmonization (1)
- Head (human) (1)
- Height (1)
- Hell (1)
- Highway design (1)
- Hip (human) (1)
- Hubraum (1)
- Human factor (1)
- Human tolerance (1)
- Hydrocarbon (1)
- Höhe (1)
- In Bewegung (1)
- In service behaviour (1)
- In situ (1)
- Incident detection (1)
- Information management (1)
- Innenstadt (1)
- Intersection (1)
- Junction (1)
- Karte (1)
- Katalyse (1)
- Kleintransporter (1)
- Kognitive Aufgabenanforderung (1)
- Kohlendioxid (1)
- Kohlenmonoxid (1)
- Kohlenwasserstoff (1)
- Kompatiblität (1)
- Kontakt Reifen Straße (1)
- Kooperatives System (ITS) (1)
- Kopf (menschl) (1)
- Korrelation (math, stat) (1)
- Korrosion (1)
- Kraftstoff (1)
- Kraftübertragung (Fahrzeug) (1)
- Laborexperiment (1)
- Landstrasse (1)
- Lane changing (1)
- Lang-Lkw (1)
- Leichnam (1)
- Leicht (1)
- Length (1)
- Lenkrad (1)
- Leuchtdiode (1)
- Lichtstärke (1)
- Lidschlag (1)
- Lieferfahrzeug (1)
- Light (colour) (1)
- Light emitting diode (1)
- Light intensity (1)
- Lightweight (1)
- Limit (1)
- Location (1)
- Longer and heavier vehicle (1)
- Länge (1)
- Main road (1)
- Man-machine interface (1)
- Map (1)
- Materialveränderung (allg) (1)
- Matrix (1)
- Measuring (1)
- Medication (1)
- Medizinische Gesichtspunkte (1)
- Medizinische gesichtspunkte (1)
- Medizinische untersuchung (1)
- Mensch-Maschine-Schnittstelle (1)
- Menschlicher faktor (1)
- Menschlicher körper (1)
- Text (1)
- Methode der finiten Elemente (1)
- Mobile barrier (1)
- Model (not math) (1)
- Modell (non math) (1)
- Motor (1)
- Motor cycle (1)
- Motorhaube (1)
- Moving (1)
- Müdigkeit (1)
- Nachricht (1)
- Naturalistic Driving (1)
- Naturalistic driving (1)
- Nummer (1)
- Oberbau (1)
- Old People (1)
- On the right (1)
- Optische Anzeige (1)
- Organization (1)
- Ort (Position) (1)
- Overlapping (1)
- Parken (1)
- Parking (1)
- Parking place (one veh only) (1)
- Parkstand (einzeln) (1)
- Passive Sicherheit (1)
- Pavement (1)
- Pavement Management System (1)
- Pavement design (1)
- Pavement management system (1)
- Pedestrian precinct (1)
- Pelvis (1)
- Penetration (1)
- Pfahl (1)
- Physiolog Belastungsgrenze (1)
- Pile (1)
- Pkw; Verhütung (1)
- Pollutant (1)
- Population (1)
- Pressure (1)
- Probe (1)
- Productivity (1)
- Program (computer) (1)
- Properties (1)
- Prüefverfahren (1)
- Prüfkörper (1)
- Psychological aspects (1)
- Psychologie (1)
- Psychologische Gesichtspunkte (1)
- Psychology (1)
- Public transport (1)
- Publicity (1)
- Quality assurance (1)
- Qualitätssicherung (1)
- Rammsondierung (1)
- Rechenprogramm (1)
- Rechts (1)
- Recreation (1)
- Reflectorized material (1)
- Reflexstoffe (1)
- Region (1)
- Reibungsbeiwert (1)
- Retread tyre (1)
- Rippe (menschl) (1)
- Road (1)
- Road construction (1)
- Road marking (1)
- Road network (1)
- Robot (1)
- Roboter (1)
- Rotation (1)
- Route guidance (1)
- Runderneuerter Reifen (1)
- Rural road (1)
- Rutting (wheel) (1)
- Safety fence (1)
- Schadstoff (1)
- Schall (1)
- Schnittstelle (1)
- Schulter (1)
- Schutzeinrichtung (1)
- Schweregrad /Unfall (1)
- Schwingung (1)
- Schädel (1)
- Second hand (1)
- Seite (1)
- Service area (1)
- Shape (1)
- Shoulder (human) (1)
- Side (1)
- Size and weight regulations (1)
- Skill (road user) (1)
- Skull (1)
- Social factors (1)
- Sociology (1)
- Software (1)
- Sound (1)
- Soziale Faktoren (1)
- Soziologie (1)
- Spain (1)
- Spanien (1)
- Specification (standard ) (1)
- Spectrum (1)
- Spektrum (1)
- Sport utility vehicle (1)
- Spurrinne (1)
- Stadardization (1)
- Stadt (1)
- Stand der Technik (Bericht) (1)
- Standard (1)
- Standardabweichung (1)
- Statics (1)
- Statik (1)
- Statistic (1)
- Steering wheel (1)
- Steifigkeit (1)
- Stiffness (1)
- Strain gauge (1)
- Straßenbau (1)
- Straßenentwurf (1)
- Straßennetz (1)
- Strength (mater) (1)
- Stress (1)
- Stress (psycho) (1)
- Störfallentdeckung (1)
- Surrogate driving set-up (1)
- Suspension (veh) (1)
- Sustainability (1)
- Tactile perception (1)
- Tagesfahrlicht (1)
- Taktiles Signal (1)
- Tangential (1)
- Tank Rast Anlage (1)
- Technische Vorschriften (1)
- Technische Überwachung (1)
- Terrain (1)
- Tests (1)
- Thesis (1)
- Tiefe (1)
- Town centre (1)
- Toxicity (1)
- Toxizität (1)
- Tracking task (1)
- Trackingaufgabe (1)
- Traffic Control (1)
- Traffic assignment (1)
- Traffic engineering (1)
- Traffic flow (1)
- Traffic lanes (1)
- Traffic regulation (1)
- Traffic sign (1)
- Tragfähigkeit (1)
- Trailer (1)
- Train (1)
- Transmission (veh) (1)
- Transport (1)
- Trunkenheit (1)
- Tunnel (1)
- Turning (1)
- Typenzulassung (1)
- Tätigkeitsbericht (1)
- USA (1)
- Umwelt (1)
- Umweltfreundlichkeit (1)
- Underride prevention (1)
- Unfalldaten (1)
- Unfallneigung (1)
- United Kingdom (1)
- United kingdom (1)
- Urban area (1)
- Vehicle Regulations (1)
- Vehicle regulation (1)
- Veraenderung (1)
- Verkehrsfluss (1)
- Verkehrsstauung (1)
- Verkehrstechnik (1)
- Verkehrsumlegung (1)
- Verkehrswirtschaft (1)
- Verkehrszeichen (1)
- Verwaltung (1)
- Video camera (1)
- Vorne (1)
- Wasser (1)
- Water (1)
- Wear (1)
- Weather (1)
- Werbung (1)
- Width (1)
- Winkel (1)
- Wirkungsanalyse (1)
- Wirtschaftlichkeit (1)
- Witterung (1)
- Woman (1)
- Working group (1)
- Yawing (veh) (1)
- Zahl (1)
- Zentrale Verkehrssteuerung (1)
- Zielführungssystem (1)
- Zug (Eisenbahn) (1)
- Zugänglichkeit (1)
- Zusammendrückung (1)
- Zustandsbewertung (1)
- skill (1)
- Öffentlicher Verkehr (1)
- Überdeckung (1)
Institut
The main objective of EC CASPER research project is to reduce fatalities and injuries of children travelling in cars. Accidents involving children were investigated, modelling of human being and tools for dummies were advanced, a survey for the diagnosis of child safety was carried out and demands and applications were analysed. From the many research tasks of the CASPER project, the intention of this paper is to address the following: • In-depth investigation of accidents and accident reconstruction. These will provide important points for the injury risk curve, in order to improve it. Different accident investigation teams collected data from real road accidents, involving child car passengers, in five different European countries. Then, a selection of the most appropriate cases for the injury risk curve and the purposes of the project was made for an in-depth analysis. The final stage of this analysis was to conduct an accident reconstruction to validate the results obtained. The in-depth analysis included on-scene accident investigation, creating virtual simulations of the accident/possible reconstruction, and conducting the reconstruction. In the cases of successful reconstructions, new points were introduced to the injury risk curves. Accident reconstructions of selected cases were carried out in test laboratories as the next step following in-depth road accident investigation. These cases were reconstructed using similar child restraint systems (CRS) and the same type make and model as in the real accidents. Reconstructing real cases has several limitations, such as crash angle, cars" approximation paths and crash speed. However, a few changes and applications on the testing conditions were applied to reduce the limitations and improved the representations of the real accidents. After conducting the reconstructions, a comparison between the deformations of the cars on the real accident and the vehicles from the reconstructions was made. Additionally, a correlation between the data captured from the dummies and the injury data from the real accident was sought. This finalises an in-depth analysis of the accident, which will provide new relevant points to the injury risk curve. The CASPER project conducted a large research programme on child safety. On technical points, a promising research area is the developing injury risk curves as a result of in-depth accident investigations and reconstructions. This abstract was written whilst the project was not yet finished and final results are not yet known, but they will be available by the time of the conference. All the works and findings will not necessarily be integrated in the industrial versions of evaluation tools as the CASPER project is a research program.
The GRSP informal group on child restraint systems (CRS) finalised phase 1 of a new regulation for the homologation of CRS . This regulation is the subject of several discussions concerning the safety benefits and the advantages and disadvantages that certain specific points may bring. However, these discussions are sometimes not based on scientific facts and do not consider the whole package but only single items. Based on the experience of the CASPER partners in the fields of human behaviour, accident analysis, test procedures and biomechanics in the area of child safety, a consideration of the safety benefits of phase 1 of the new regulation and recommendations for phase 2 will be given.
Although the number of road accident casualties in Europe (EU27) is falling the problem still remains substantial. In 2011 there were still over 30,000 road accident fatalities. Approximately half of these were car occupants and about 60 percent of these occurred in frontal impacts. The next stage to improve a car's safety performance in frontal impacts is to improve its compatibility. The objective of the FIMCAR FP7 EU-project was to develop an assessment approach suitable for regulatory application to control a car's frontal impact and compatibility crash performance and perform an associated cost benefit analysis for its implementation. This paper reports the cost benefit analyses performed to estimate the effect of the following potential changes to the frontal impact regulation: • Option 1 " No change and allow current measures to propagate throughout the vehicle fleet. • Option 2 " Add a full width test to the current offset Deformable Barrier (ODB) test. • Option 3 " Add a full width test and replace the current ODB test with a Progressive Deformable Barrier (PDB) test. For the analyses national data were used from Great Britain (STATS 19) and from Germany (German Federal Statistical Office). In addition in-depth real word crash data were used from CCIS (Great Britain) and GIDAS (Germany). To estimate the benefit a generalised linear model, an injury reduction model and a matched pairs modelling approach were applied. The benefits were estimated to be: for Option 1 "No change" about 2.0%; for Option 2 "FW test" ranging from 5 to 12% and for Option 3 "FW and PDB tests" 9 to 14% of car occupant killed and seriously injured casualties.
Aufgrund des demografischen Wandels werden in der Zukunft immer mehr ältere Menschen ein Kraftfahrzeug führen. Das vorliegende Projekt soll Erkenntnisse dazu liefern, wie unter Berücksichtigung der Verkehrssicherheit die Mobilität der älteren Fahrer so lange wie möglich erhalten werden kann. Unfallanalysen zeigen, dass ältere Kraftfahrer typische Fahrfehler bzw. Unfälle begehen. Unklar ist derzeit die genaue Ursache hierfür, vor allem vor dem Hintergrund der langjährigen Erfahrung älterer Kraftfahrer, welche eher eine äußerst geringe Unfallrate vermuten ließe. Ziel der vorliegenden Untersuchung war es, tiefere Erkenntnisse äber die Ursache von Fahrfehlern älterer Kraftfahrer zu gewinnen, um daraus Anforderungen an die technische Weiterentwicklung von Fahrerassistenzsystemen ableiten zu können. Diese Fahrerassistenzsysteme sollen speziell älteren Autofahrern Hilfestellung zum sicheren Führen von Kraftfahrzeugen bieten. In dem folgenden Laborexperiment wurde ein Doppeltätigkeits-Paradigma verwendet, indem eine Spurhalteaufgabe mit einer peripheren Lichtreizaufgabe kombiniert wurde. Die peripheren Lichtreize wurden den Probanden bilateral in zwei verschiedenen Abständen vom zentralen Punkt des Sehens (20 Grad und 60 Grad) präsentiert. Die Aufgaben wurden von älteren (65+) und jüngeren Kraftfahrern (22-45) zuerst einzeln, dann in Kombination durchgeführt. Um Aufschluss über mögliche Ursachen von Leistungsbeeinträchtigungen erhalten zu können, wurde neben der Erfassung von Verhaltensdaten (Spurabweichungen, Reaktionszeit, Anzahl der Auslassungen) ein Elektroenzephalogramm abgeleitet, welches Einblicke in die zugrunde liegenden neuronalen Verarbeitungsmechanismen ermöglicht. Wie erwartet, zeigten Ältere in der Spurhalteaufgabe schlechtere Leistungen als Jüngere, besonders bei gleichzeitiger Durchführung der Lichtreizaufgabe (Doppel-Aufgabe). In der Lichtreizaufgabe unterschieden sich die Leistungen der Altersgruppen nur bei Lichtreizen, die im 60 Grad Sehwinkel auftraten. Die Älteren reagierten hier langsamer und zeigten mehr Auslassungen als die Jüngeren. Überraschenderweise zeigten alle Versuchspersonen weniger Auslassungen in der Doppel-Aufgabe. Mittels Elektroenzephalogramm wurde anhand der ereigniskorrelierten Potenziale (EKP) deutlich, dass die Defizite Älterer nicht in einer Einschränkung der frühen Verarbeitung peripherer Reize (P1) liegen, da die P1 Amplitude bei Älteren sogar höher war als bei Jüngeren. Die N2 Amplitude, welche Hinweise auf die Verschiebung der Aufmerksamkeit gibt, war bei Jüngeren hingegen bei weiter peripher liegenden Reizen (60 Grad Sehwinkel) erhöht, was einen fronto-zentral fokussierten Kontrollprozess widerspiegelt. Die Orientierung auf den peripheren Reiz (P3a) war bei Älteren geringer ausgeprägt sowie auch die Zuordnung von Verarbeitungsressourcen (P3b) vor allem bei peripheren Lichtreizen. Es liegen zudem Hinweise darauf vor, dass Ältere verlängerte Reaktionszeiten aufgrund einer verzögerten Reaktionsaktivierung aufweisen. Mit dem vorliegenden Experiment konnte also gezeigt werden, dass die schlechteren Leistungen der älteren Versuchspersonen nicht auf periphere Sehleistungsmängel zurückzuführen sind, sondern einem späteren kognitiven Verarbeitungsprozess zuzuschreiben sind. Die Ergebnisse werden vor dem Hintergrund der Literatur und der Erfordernisse technischer Unterstützungen älterer Kraftfahrer diskutiert.
Um die zukünftige Entwicklung von Fahrzeugen mit alternativem Antrieb in Deutschland verfolgen, analysieren und mögliche negative Auswirkungen auf die Verkehrssicherheit zeitnah identifizieren zu können, hat die Bundesanstalt für Straßenwesen (BASt) im Jahr 2010 die Einrichtung einer langfristigen Beobachtung des Fahrzeugmarktes und des Unfallgeschehens von Pkw mit alternativen Antriebsarten initiiert. Die Daten des vorliegenden Berichtes dokumentieren die Marktdurchdringung von Personenkraftwagen mit alternativen Antriebsarten und informieren über die Unfallbeteiligung von Fahrzeugen mit alternativem Antrieb bis 2011. Es hat sich gezeigt, dass Fahrzeuge mit Hybridantrieb nach wie vor ein starkes Marktwachstum aufweisen. Die Zuwachsrate ist nahezu auf dem gleichen hohen Niveau wie in den Vorjahren (ca. 28%, getypter Bestand). Bei den reinen Elektrofahrzeugen ist die Anzahl getypter Fahrzeuge sehr stark angestiegen, von 212 im Jahr 2010 auf 1880 im Jahr 2011. Der reale Bestand an Elektrofahrzeugen (inklusive ungetypter Fahrzeuge) hat sich demgegenüber von 2010 auf 2011 auf 4.541 Pkw verdoppelt. Dies deutet auf eine zunehmende Serienreife von Elektro-Kfz hin. Pkw mit alternativem Antrieb weisen 2011 (bis auf Gas) einen höheren Anteil an Unfällen innerorts auf als Pkw mit herkömmlichem Antrieb. Hybrid Fahrzeuge haben dabei eine erhöhte Beteiligungsquote innerorts von ca. 76%. Der relativ hohe Anteil von Innerortsunfällen von alternativ betriebenen Fahrzeugen ist vor allem vor dem Hintergrund der Nutzung der Fahrzeuge zu interpretieren.
Regarding to the German road traffic licensing regulations it is mandatory to have a light system using a bicycle in public traffic. All attached components must be approved. The admission requires additional restrictions such as a dynamo as energy source with a nominal voltage of 6 V. Batteries are only allowed in addition to this. To adopt the German bicycle regulation to the state of art of an energy efficient lighting, additional power sources such as a battery respectively rechargeable batterie should be evaluated. The project will propose amendments for German Road Traffic Regulations and technical requirements.
A biofidelic flexible pedestrian legform impactor (FlexPLI) has been developed from the year 2000 onwards and evaluated by a technical evaluation group (Flex-TEG) of UN-ECE GRSP. A recently established UN-ECE GRSP Informal Group on GTR9 Phase 2 is aiming at introducing the FlexPLI within world-wide regulations on pedestrian safety (Phase 2 of GTR No. 9 as well as the new UN regulation 127 on pedestrian safety) as a test tool for the assessment of lower extremity injuries in lateral vehicle-to-pedestrian accidents. Besides, the FlexPLI has already been introduced within JNCAP and is on the Euro NCAP roadmap for 2014. Despite of the biofidelic properties in the knee and tibia sections, several open issues related to the FlexPLI, like the estimation of the cost benefit, the feasibility of vehicle compliance with the threshold values, the robustness of the impactor and of the test results, the comparability between prototype and production level and the finalization of certification corridors still needed to be solved. Furthermore, discussions with stakeholders about a harmonized lower legform to bumper test area are still going on. This paper describes several studies carried out by the Federal Highway Research Institute (BASt) regarding the benefit due to the introduction of the FlexPLI within legislation for type approval, the robustness of test results, the establishment of new assembly certification corridors and a proposal for a harmonized legform to bumper test area. Furthermore, a report on vehicle tests that previously had been carried out with three prototype legforms and were now being repeated using legforms with serial production status, is given. Finally, the paper gives a status report on the ongoing simulation and testing activities with respect to the development and evaluation of an improved test procedure with upper body mass for assessing pedestrian femur injuries.
For a number of EU regulatory acts Virtual Testing (VT) is already allowed for type approval (see Commission Regulation No. 371/2010 of 16 April 2010 amending the Framework Directive 2007/46/EC). However, only a very general procedure on how to apply VT for type approval is provided. Technical details for specific regulatory acts are not given yet. The main objective of the European project IMVITER (IMplementation of VIrtual TEsting in Safety Regulations) was to promote the implementation of VT in safety regulations. When proposing VT procedures the new regulation was taken into account, in particular, addressing open issues. Special attention was paid to pedestrian protection as pilot cases. A key aspect for VT implementation is to demonstrate that the employed simulation models are reliable. This paper describes how the Verification and Validation (V&V) method defined by the American Society of Mechanical Engineers was adapted for pedestrian protection VT based assessment. or the certification of headform impactors an extensive study was performed at two laboratories to assess the variability in calibration tests and equivalent results from a set of simulation models. Based on these results a methodology is defined for certification of headform impactor simulation models. A similar study was also performed with one vehicle in the type approval test setup. Its bonnet was highly instrumented and subjected to 45 impacts in five different positions at two laboratories in order to obtain an estimation of the variability in the physical tests. An equivalent study was performed using stochastic simulation with a metamodel fed with observed variability in impact conditions of physical headforms. An estimation of the test method uncertainty was obtained and used in the definition of a validation corridor for simulation models. Validation metric and criteria were defined in cooperation with the ISO TC22 SC10 and SC12 WG4 "Virtual Testing". A complete validation procedure including different test setups, physical magnitudes and evaluation criteria is provided. A detailed procedural flowchart is developed for VT implementation in EC Regulation No 78/2009 based on a so called "Hybrid VT" approach, which combines real hardware based head impact tests and simulations. This detailed flowchart is shown and explained within this paper. Another important point within the virtual testing based procedures is the documentation of relevant information resulting from the verification and validation process of the numerical models used. For this purpose report templates were developed within the project. The proposed procedure fixes minimum V&V requirements for numerical models to be confidently used within the type-approval process. It is not intended to be a thorough guide on how to build such reliable models. Different modeling methodologies are therefore possible, according to particular OEM know-how. These requirements respond to a balance amongst the type-approval stakeholders interests. A cost-benefit analysis, which was also performed within the IMVITER project, supports this approach, showing the conditions in which VT implementation is beneficial. Based on the experience gained in the project and the background of the experts involved an outlook is given as a roadmap of VT implementation, identifying the most important milestones to be reached along the way to a future vehicle type approval procedure supported by VT. The results presented in this paper show an important step addressing open questions and fostering the future acceptance of virtual testing in pedestrian protection type approval procedures.
A series of drop tests and vehicle tests with the adult head impactor according to Regulation (EC) 631/2009 and drop tests with the phantom head impactor according to UN Regulation No. 43 have been carried out by the German Federal Highway Research Institute (BASt) on behalf of the German Federal Ministry of Transport, Building and Urban Development (BMVBS). Aim of the test series was to study the injury risk for vulnerable road users, especially pedestrians, in case of being impacted by a motor vehicle in a way described within the European Regulations (EC) 78/2009 and (EC) 631/2009. Furthermore, the applicability of the phantom head drop test described in UN Regulation No. 43 for plastic glazing should be investigated. In total, 30 drop tests, thereof 18 with the adult head impactor and 12 with the phantom head impactor, and 49 vehicle tests with the adult head impactor were carried out on panes of laminated safety glass (VSG), polycarbonate (PC) and laminated polycarbonate (L-PC). The influence of parameters such as the particular material properties, test point locations, fixations, ambient conditions (temperature and impact angle) was investigated in detail. In general, higher values of the Head Injury Criterion (HIC) were observed in tests on polycarbonate glazing. As the HIC is the current criterion for the assessment of head injury risk, polycarbonate glazing has to be seen as more injurious in terms of vulnerable road user protection. In addition, the significantly higher rebound of the head observed in tests with polycarbonate glazing is suspected to lead to higher neck loads and may also cause higher injury risks in secondary impacts of vulnerable road users. However, as in all tests with PC glazing no damage of the panes was observed, the risk of skin cut injuries may be expected to be reduced significantly. The performed test series give no indication for the test procedure prescribed in UN Regulation No. 43 as a methodology to approve glass windscreen not being feasible for polycarbonate glazing, as all PC panes tested fulfilled the UN R 43 requirements. The performance of the windscreen area will not be relevant for vehicle type approval according to the upcoming UN Regulation for pedestrian protection. However, it is recommended that pedestrian protection being considered for plastic windscreens to ensure at least the same level of protection as glass windscreens.
Recent accident statistics from the German national database state bicyclists being the second endangered group of vulnerable road users besides pedestrians. With 399 fatalities, more than 14.000 seriously injured and more than 61.000 slightly injured persons on german roads in the year 2011, the group of bicyclists is ranked second of all road user groups (Statistisches Bundesamt, 2012). While the overall bicycle helmet usage frequency in Germany is very low, evidence is given that its usage leads to a significant reduction of severe head injuries. After an estimation of the benefit of bicycle helmet usage as well as an appropriate test procedure for bicyclists, this paper describes two different approaches for the improvement of bicyclist safety. While the first one is focusing on the assessment of the vehicle based protection potential for bicyclists, the second one is concentrating on the safety assessment of bicycle helmets. Within the first part of the study the possible revision of the existing pedestrian testing protocols is being examined, using in depth accident data, full scale simulation and hardware testing. Within the second part of the study, the results of tests according to supplemental test procedures for the safety assessment of bicycle helmets developed by the German Federal Highway Research Institute (BASt) are presented. An additional full scale test performed at reduced impact speed proves that measures of active vehicle safety as e.g. braking before the collision event do not necessarily always lead to a reduction of injury severity.
Die Initiative der Einführung kooperativer Systeme in einem Korridor von Rotterdam über Frankfurt/Main nach Wien, dem sogenannten C-ITS Corridor, und damit auch in Deutschland wurde im Juni 2013 durch die Unterzeichnung einer entsprechenden Absichtserklärung des Bundesministeriums für Verkehr, Bau und Stadtentwicklung mit den Verkehrsministern der Niederlande und Österreichs offiziell gestartet. In vielen Forschungsprojekten wurden vorher die Grundlagen erarbeitet, um eine solche Einführung technisch überhaupt erst möglich zu machen. Im Beitrag werden diese Ergebnisse nochmals kurz aufgegriffen und um den aktuellen Stand bei den Entwicklungen im C-ITS Corridor erweitert. Als erstes Einführungsszenario wurden die Baustellenwarnung und Kooperatives Verkehrsmanagement unter Einbeziehung von Fahrzeugdaten gewählt. Nicht verschwiegen werden sollen hierbei auch die wesentlichen Herausforderungen, die im Übergang von Forschung und Feldtests zu realen Anwendungen liegen.
The goal of the project FIMCAR (Frontal Impact and Compatibility Assessment Research) was to define an integrated set of test procedures and associated metrics to assess a vehicle's frontal impact protection, which includes self- and partner-protection. For the development of the set, two different full-width tests (full-width deformable barrier [FWDB] test, full-width rigid barrier test) and three different offset tests (offset deformable barrier [ODB] test, progressive deformable barrier [PDB] test, moveable deformable barrier with the PDB barrier face [MPDB] test) have been investigated. Different compatibility assessment procedures were analysed and metrics for assessing structural interaction (structural alignment, vertical and horizontal load spreading) as well as several promising metrics for the PDB/MPDB barrier were developed. The final assessment approach consists of a combination of the most suitable full-width and offset tests. For the full-width test (FWDB), a metric was developed to address structural alignment based on load cell wall information in the first 40 ms of the test. For the offset test (ODB), the existing ECE R94 was chosen. Within the paper, an overview of the final assessment approach for the frontal impact test procedures and their development is given.
Müdigkeit am Steuer ist eine bedeutsame Ursache von Straßenverkehrsunfällen. Es steht eine Fülle unterschiedlicher Methoden zur Verfügung, um Müdigkeit beim Fahrer zu erkennen. Ziel des vorliegenden Projekts war es, auf Basis einer mehrstufigen Befragung von zwölf Experten aus Industrie- und Hochschulforschung die Stärken und Schwächen der derzeit validesten objektiven Müdigkeitsmessverfahren vergleichend zu beschreiben. Als Basis der Bewertung diente ein eigens erarbeiteter Gütekriterienkatalog. Zu den validesten Müdigkeitsmessverfahren gehören aus Expertensicht Lenkverhalten und Spurhaltung, Indikatoren des Lidschlussverhaltens und des EEG, das videobasierte Expertenrating sowie der kontrovers diskutierte Pupillografische Schläfrigkeitstest. Die Güteprofile der sechs ausgewählten Messverfahren werden aufgeführt. Je nach Einsatzgebiet sind alle ausgewählten Messverfahren (Forschung und Entwicklung), nur einige (Müdigkeitswarnsystem im Fahrzeug), oder kein einziges (Verkehrskontrolle) geeignet. Dem Urteil der Experten nach bedarf eine valide Müdigkeitserfassung der Kombination von mindestens zwei Messverfahren unter Berücksichtigung der spezifischen Stärke-Schwächenprofile.
The off-set assessment procedure potentially contributes to the FIMCAR objectives to maintain the compartment strength and to assess load spreading in frontal collisions. Furthermore it provides the opportunity to assess the restraint system performance with different pulses if combined with a full-width assessment procedure in the frontal assessment approach. Originally it was expected that the PDB assessment procedure would be selected for the FIMCAR assessment approach. However, it was not possible to deliver a compatibility metric in time so that the current off-set procedure (ODB as used in UNECE R94) with some minor modifications was proposed for the FIMCAR Assessment Approach. Nevertheless the potential to assess load spreading, which appears not to be possible with any other assessed frontal impact assessment procedure was considered to be still high. Therefore the development work for the PDB assessment procedure did not stop with the decision not to select the PDB procedure. As a result of the decisions to use the current ODB and to further develop the PDB procedure, both are covered within this deliverable. The deliverable describes the off-set test procedure that will be recommended by FIMCAR consortium, this corresponds to the ODB test as it is specified in UN-ECE Regulation 94 (R94), i.e. EEVC deformable element with 40% overlap at a test speed of 56 km/h. In addition to the current R94 requirements, FIMCAR will recommend to introduce some structural requirements which will guarantee sufficiently strong occupant compartments by enforcing the stability of the forward occupant cell. With respect to the PDB assessment procedure a new metric, Digital Derivative in Y direction - DDY, was developed, described, analysed, and compared with other metrics. The DDY metric analyses the deformation gradients laterally across the PDB face. The more even the deformation, the lower the DDY values and the better the metric- result. In order analyse the different metrics, analysis of the existing PDB test results and the results of the performed simulation studies was performed. In addition, an assessment of artificial deformation profiles with the metrics took place. This analysis shows that there are still issues with the DDY metric but it appears that it is possible to solve them with future optimisations. For example the current metric assesses only the area within 60% of the half vehicle width. For vehicles that have the longitudinals further outboard, the metric is not effective. In addition to the metric development, practical issues of the PDB tests such as the definition of a scan procedure for the analysis of the deformation pattern including the validation of the scanning procedure by the analysis of 3 different scans at different locations of the same barrier were addressed. Furthermore the repeatability and reproducibility of the PDB was analysed. The barrier deformation readings seem to be sensitive with respect to the impact accuracy. In total, the deliverable is meant to define the FIMCAR off-set assessment procedure and to be a starting point for further development of the PDB assessment procedure.
The objective of this deliverable is to describe the expected influence of the candidate test procedures developed in FIMCAR for frontal impact on other impact types. The other impact types of primary interest are front-to-side impacts, collisions with road restraint systems (e.g. guardrails), and heavy goods vehicle impacts. These collision types were chosen as they involve structures that can be adapted to improve safety. Collisions with vulnerable road users (VRU) were not explicitly investigated in FIMCAR. It is expected that the vehicle structures of interest in FIMCAR can be designed into a VRU friendly shell. Information used for this deliverable comes from simulations and car-to-car crash tests conducted in FIMCAR or review of previous research. Three test configurations (full width, offset, and moving deformable barriers) were the input to the FIMCAR selection process. There are three different types of offset tests and two different full width tests. During the project test procedures could be divided into three groups that provide different influences or outcomes on vehicle designs: 1. The ODB barrier provides a method to assess part of the vehicles energy absorption capabilities and compartment test in one test. 2. The FWRB and FWDB have similar capabilities to control structural alignment, further assess energy absorption capabilities, and promote the improvements in the occupant restraint system for high deceleration impacts. 3. The PDB and MPDB can be used to promote better load spreading in the vehicle structures, in addition to assessing energy absorption and occupant compartment strength in an offset configuration. The consortium selected the ODB and FWDB as the two best candidates for short term application in international rulemaking. The review of how all candidates would affect vehicle performance in other impacts (beside front-to-front vehicle or frontal impacts with fixed obstacles) however is reported in this deliverable to support the benefit analysis reported in FIMCAR. The grouping presented above is used to discuss all five test candidates using similarities between certain tests and thereby simplify the discussion.
The objectives of the FIMCAR (Frontal Impact and Compatibility Assessment Research) project are to answer the remaining open questions identified in earlier projects (such as understanding of the advantages and disadvantages of force based metrics and barrier deformation based metrics, confirmation of specific compatibility issues such as structural interaction, investigation of force matching) and to finalise the frontal impact test procedures required to assess compatibility. Research strategies and priorities were based on earlier research programs and the FIMCAR accident data analysis. The identified real world safety issues were used to develop a list of compatibility characteristics which were then prioritised within the consortium. This list was the basis for evaluating the different test candidates. This analysis resulted in the combination of the Full Width Deformable Barrier test (FWDB) with compatibility metrics and the existing Offset Deformable Barrier (ODB) as described in UN-ECE Regulation 94 with additional cabin integrity requirement as being proposed as the FIMCAR assessment approach. The proposed frontal impact assessment approach addresses many of the issues identified by the FIMCAR consortium but not all frontal impact and compatibility issues could be addressed.
Road markings are an essential component of a safe road. In particular, the optical guidance at night and under wet conditions rates high. Special surface textures of road markings can enhance the nighttime visibility during wetness, but they can lead on the other hand to noise emission during passages of vehicles and thus annoy residents. In the present study the tyre/road marking noise is analysed based on two different measurement methods for traffic noise: Several different road markings with increased nighttime visibility during wetness were overrun and the noise was determined by controlled coast-by measurements as well as close-proximity measurements. For both measuring methods the averaged A-weighted sound pressure levels were determined and an analysis of the third octave spectra was performed in order to identify annoying tonal components. The results of both measurement methods were compared with each other. Limitations of the individual measurement methods were overcome by combining the data. Properties of road marking noise depending on the texture of the marking are discussed in relation to those of road surface noise. The results will help specifying road marking texture types that ensure less annoyance and at the same time good visibility at wetness and night-time.
For the assessment of vehicle safety in frontal collisions compatibility (which consists of self and partner protection) between opponents is crucial. Although compatibility has been analysed worldwide for over 10 years, no final assessment approach has been defined to date. Taking into account the European Enhanced Vehicle safety Committee (EEVC) compatibility and frontal impact working group (WG15) and the FP5 VC-COMPAT project activities, two test approaches have been identified as the most promising candidates for the assessment of compatibility. Both are composed of an off-set and a full overlap test procedure. In addition another procedure (a test with a moving deformable barrier) is getting more attention in current research programmes. The overall objective of the FIMCAR project is to complete the development of the candidate test procedures and propose a set of test procedures suitable for regulatory application to assess and control a vehicle- frontal impact and compatibility crash safety. In addition an associated cost benefit analysis should be performed. The objectives of the work reported in this deliverable were to review existing full-width test procedures and their discussed compatibility metrics, to report recent activities and findings with respect to full-width assessment procedures and to assess test procedures and metrics. Starting with a review of previous work, candidate metrics and associated performance limits to assess a vehicle- structural interaction potential, in particular its structural alignment, have been developed for both the Full Width Deformable Barrier (FWDB) and Full Width Rigid Barrier (FWRB) tests. Initial work was performed to develop a concept to assess a vehicle- frontal force matching. However, based on the accident analyses performed within FIMCAR frontal force matching was not evaluated as a first priority and thus in line with FIMCAR strategy the focus was put on the development of metrics for the assessment of structural interaction which was evaluated as a first priority.
Accident analysis
(2014)
For the assessment of vehicle safety in frontal collisions compatibility (which consists of self and partner protection) between opponents is crucial. Although compatibility has been analysed worldwide for years, no final assessment approach has been defined to date. Taking into account the European Enhanced Vehicle safety Committee (EEVC) compatibility and frontal impact working group (WG15) and the EC funded FP5 VC-COMPAT project activities, two test approaches have been identified as the most promising candidates for the assessment of compatibility. Both are composed of an off-set and a full overlap test procedure. In addition another procedure (a test with a moving deformable barrier) is getting more attention in today- research programmes. The overall objective of the FIMCAR project is to complete the development of the candidate test procedures and propose a set of test procedures suitable for regulatory application to assess and control a vehicle- frontal impact and compatibility crash safety. In addition an associated cost benefit analysis should be performed. The specific objectives of the work reported in this deliverable were: - Determine if previously identified compatibility issues are still relevant in current vehicle fleet: Structural interaction, Frontal force matching, Compartment strength in particular for light cars. - Determine nature of injuries and injury mechanisms: Body regions injured o Injury mechanism: Contact with intrusion, Contact, Deceleration / restraint induced. The main data sources for this report were the CCIS and Stats 19 databases from Great Britain and the GIDAS database from Germany. The different sampling and reporting schemes for the detailed databases (CCIS & GIDAS) sometimes do not allow for direct comparisons of the results. However the databases are complementary " CCIS captures more severe collisions highlighting structure and injury issues while GIDAS provides detailed data for a broader range of crash severities. The following results represent the critical points for further development of test procedures in FIMCAR.
Cost benefit analysis
(2014)
Although the number of road accident casualties in Europe is falling the problem still remains substantial. In 2011 there were still over 30,000 road accident fatalities [EC 2012]. Approximately half of these were car occupants and about 60 percent of these occurred in frontal impacts. The next stage to improve a car- safety performance in frontal impacts is to improve its compatibility for car-to-car impacts and for collisions against objects and HGVs. Compatibility consists of improving both a car- self and partner protection in a manner such that there is good interaction with the collision partner and the impact energy is absorbed in the car- frontal structures in a controlled way which results in a reduction of injuries. Over the last ten years much research has been performed which has found that there are four main factors related to a car- compatibility [Edwards 2003, Edwards 2007]. These are structural interaction potential, frontal force matching, compartment strength and the compartment deceleration pulse and related restraint system performance. The objective of the FIMCAR FP7 EC-project was to develop an assessment approach suitable for regulatory application to control a car- frontal impact and compatibility crash performance and perform an associated cost benefit analysis for its implementation.