Abteilung Fahrzeugtechnik
Filtern
Erscheinungsjahr
Dokumenttyp
Sprache
- Englisch (106) (entfernen)
Schlagworte
- Anfahrversuch (37)
- Safety (35)
- Impact test (veh) (34)
- Sicherheit (34)
- Bewertung (30)
- Conference (29)
- Evaluation (assessment) (29)
- Konferenz (29)
- Fahrzeug (26)
- Test method (25)
- Vehicle (25)
- Prüfverfahren (24)
- Dummy (20)
- Fußgänger (20)
- Pedestrian (20)
- Accident (19)
- Unfall (19)
- Anthropometric dummy (18)
- Verletzung (18)
- Deutschland (17)
- Frontalzusammenstoß (17)
- Germany (17)
- Injury (17)
- Collision (16)
- Head on collision (16)
- Simulation (16)
- Kompatibilität (15)
- Compatibility (14)
- Driver assistance system (14)
- Versuch (14)
- Zusammenstoß (14)
- Fahrerassistenzsystem (13)
- Test (13)
- Analyse (math) (12)
- Analysis (math) (12)
- Biomechanics (11)
- Biomechanik (11)
- Europa (11)
- Europe (11)
- Schweregrad (Unfall, Verletzung) (10)
- injury) (10)
- Car (9)
- Child (9)
- Head (9)
- Kind (9)
- Kopf (9)
- Radfahrer (9)
- Seitlicher Zusammenstoß (9)
- Severity (accid, injury) (9)
- Side impact (9)
- Technische Vorschriften (Kraftfahrzeug) (9)
- Verletzung) (9)
- Bemessung (8)
- Cyclist (8)
- Design (overall design) (8)
- Forschungsarbeit (8)
- Method (8)
- Passives Sicherheitssystem (8)
- Research project (8)
- Schweregrad (Unfall (8)
- Severity (accid (8)
- Vehicle regulations (8)
- Verfahren (8)
- Automatic (7)
- Automatisch (7)
- Driver (7)
- Fahrer (7)
- Fahrzeuginnenraum (7)
- Improvement (7)
- Insasse (7)
- Interior (veh) (7)
- Passive safety system (7)
- Standardisierung (7)
- Vehicle occupant (7)
- Verbesserung (7)
- Active safety system (6)
- Aktives Sicherheitssystem (6)
- Brustkorb (6)
- Deformierbare Barriere (Anpralltest) (6)
- Gesetzgebung (6)
- Knee (human) (6)
- Legislation (6)
- Perception (6)
- Pkw (6)
- Schlag (6)
- Shock (6)
- Thorax (6)
- Unfallverhütung (6)
- Wahrnehmung (6)
- Accident prevention (5)
- Autonomes Fahren (5)
- Autonomous driving (5)
- Behaviour (5)
- Braking (5)
- Bremsung (5)
- Cost benefit analysis (5)
- Datenbank (5)
- Deformation (5)
- Development (5)
- Driver information (5)
- Entwicklung (5)
- Fahrerinformation (5)
- Fatality (5)
- Forschungsbericht (5)
- Impact test (5)
- Lkw (5)
- Lorry (5)
- Research report (5)
- Standardization (5)
- Tödlicher Unfall (5)
- Verhalten (5)
- Wirtschaftlichkeitsrechnung (5)
- Alte Leute (4)
- Aufprallschlitten (4)
- Database (4)
- Deformable barrier (impact test) (4)
- Fahrstabilität (4)
- Impact sled (4)
- Knie (menschl) (4)
- Leg (human) (4)
- Leistungsfähigkeit (allg) (4)
- Measurement (4)
- Messung (4)
- Modification (4)
- Motorcycle (4)
- Motorrad (4)
- Prevention (4)
- Reproducibility (4)
- Reproduzierbarkeit (4)
- Statistics (4)
- Statistik (4)
- Technologie (4)
- Technology (4)
- Vehicle handling (4)
- Verformung (4)
- Airbag (3)
- Bein (menschl) (3)
- Belastung (3)
- Benutzung (3)
- Body (car) (3)
- Collision avoidance system (3)
- Communication (3)
- EU (3)
- Efficiency (3)
- Empfindlichkeit (3)
- Ergonomics (3)
- Error (3)
- Fahrzeugführung (3)
- Fahrzeugsitz (3)
- Fehler (3)
- Front (3)
- Gewicht (3)
- Halswirbel (3)
- Human body (3)
- Intelligent transport system (3)
- Karosserie (3)
- Kommunikation (3)
- Kraftfahrzeug (3)
- Lenken (Fahrzeug) (3)
- Load (3)
- Mathematical model (3)
- Menschlicher Körper (3)
- Motorcyclist (3)
- Motorradfahrer (3)
- Official approval (3)
- Old people (3)
- Reaction (human) (3)
- Reaktionsverhalten (3)
- Rechenmodell (3)
- Risiko (3)
- Risk (3)
- Safety belt (3)
- Seat (veh) (3)
- Sensitivity (3)
- Sensor (3)
- Sicherheitsgurt (3)
- Steering (process) (3)
- Straßenverkehrsrecht (3)
- Use (3)
- Veränderung (3)
- Visual display (3)
- Weight (3)
- Wirbelsäule (3)
- Abdomen (2)
- Ablenkung (psychol) (2)
- Anthropmetric dummy (2)
- Anti locking device (2)
- Antikollisionssystem (2)
- Auffahrunfall (2)
- Ausrüstung (2)
- Autonomes Fahrzeug (2)
- Autonomous vehicle (2)
- Bildschirm (2)
- Cause (2)
- Cervical vertebrae (2)
- Classification (2)
- Crash Test (2)
- Decrease (2)
- Detection (2)
- Detektion (2)
- Distraction (2)
- Driving (veh) (2)
- Emission (2)
- Equipment (2)
- Forecast (2)
- Geschwindigkeit (2)
- Haftung (jur) (2)
- Headlamp (2)
- Hospital (2)
- Intelligentes Transportsystem (2)
- Interface (2)
- International (2)
- Kamera (2)
- Klassifizierung (2)
- Knie (2)
- Krankenhaus (2)
- Kunststoff (2)
- Leuchtdichte (2)
- Liability (2)
- Luminance (2)
- Mensch Maschine Verhältnis (2)
- Messgerät (2)
- Nacht (2)
- Night (2)
- Norm (tech) (2)
- On the spot accident investigation (2)
- Organisation (2)
- Plastic material (2)
- Prognose (2)
- Prototyp (2)
- Prototype (2)
- Rear end collision (2)
- Rear view mirror (2)
- Rückspiegel (2)
- Scheinwerfer (2)
- Schutz (2)
- Severity (acid (2)
- Sichtbarkeit (2)
- Specification (standard) (2)
- Speed (2)
- Spinal column (2)
- Stress (psychol) (2)
- Traffic (2)
- Traffic regulations (2)
- Transport infrastructure (2)
- Underride protection (2)
- Unfallrekonstruktion (2)
- Unterfahrschutz (2)
- Unterleib (2)
- Untersuchung am Unfallort (2)
- Ursache (2)
- Vereinigtes Königreich (2)
- Verhütung (2)
- Verkehr (2)
- Verkehrsinfrastruktur (2)
- Verminderung (2)
- Sichtbarkeit (2)
- Vorn (2)
- Windschutzscheibe (2)
- Windscreen (veh) (2)
- Zusammenstoss (2)
- (menschl) (1)
- Ablenkung (1)
- Accessibility (1)
- Accident rate (1)
- Accident reconstruction (1)
- Achslast (1)
- Active safety (1)
- Adult (1)
- Aged people (1)
- Air bag (restraint system) (1)
- Aktive Sicherheit (1)
- Angle (1)
- Ankündigung (1)
- Anordnung (1)
- Antiblockiereinrichtung (1)
- Antiblockiersystem (1)
- Antikollisisonssystem (1)
- Apparatus (measurement) (1)
- Apparatus (measuring) (1)
- Articulated vehicle (1)
- Attention (1)
- Attitude (psychol) (1)
- Aufmerksamkeit (1)
- Augenbewegungen (1)
- Autobahn (1)
- Axle load (1)
- Battery (1)
- Bau (1)
- Baumusterzulassung (1)
- Baustelle (1)
- Beanspruchung (1)
- Bein (1)
- Benchmark (1)
- Bicycle (1)
- Bicyclist (1)
- Blind spot (veh) (1)
- Brake light (1)
- Bremslicht (1)
- Bruch (mech) (1)
- Bus (1)
- Cadaver (1)
- Calibration (1)
- Camera (1)
- Car park (1)
- Carbon dioxide (1)
- Cervical vertebrae; Conference; Evaluation (assessment); Injury; Spinal column; Test (1)
- Chassis (1)
- Compatiblity (1)
- Compression (1)
- Congestion (traffic) (1)
- Construction (1)
- Construction site (1)
- Contact (tyre road) (1)
- Correlation (math, stat) (1)
- Crashtest (1)
- Crossing the road (pedestrian) (1)
- Damage (1)
- Data acquisition (1)
- Data bank (1)
- Datenerfassung (1)
- Dauerhaftigkeit (1)
- Daylight (1)
- Decke (Straße) (1)
- Deformable barrier (Impact test) (1)
- Deformable barrier system (impact test) (1)
- Dehnungsmessstreifen (1)
- Delivery vehicle (1)
- Demografie (1)
- Demography (1)
- Detection response task (1)
- Deterioration (1)
- Diesel engine (1)
- Dieselmotor (1)
- Digital model (1)
- Dimension (1)
- Disstraction (1)
- Driver (veh) (1)
- Driver information system (1)
- Driving aptitude (1)
- Durability (1)
- Dynamic penetration test (1)
- Dynamo (1)
- EU directive (1)
- EU-Richtlinie (1)
- Echtzeit (1)
- Economic efficiency (1)
- Economics of transport (1)
- Eichung (1)
- Eigenschaft (1)
- Einstellung (psychol) (1)
- Electronic stability program (1)
- Elektronisches Stabilitätsprogramm (1)
- Emergency (1)
- Engine capacity (1)
- Ergonomie (1)
- Ersatzfahraufgabe (1)
- Erwachsener (1)
- European New Car Assessment Programme (1)
- Eye movement (1)
- Fahrassistenzsystem (1)
- Fahrbahnmarkierung (1)
- Fahrbahnüberquerung (1)
- Fahrerinformationssystem (1)
- Fahrleistung (1)
- Fahrrad (1)
- Fahrsimulator (1)
- Fahrstreifenwechsel (1)
- Fahrtauglichkeit (1)
- Fahrwerk (1)
- Fahrzeugbeleuchtung (1)
- Failure (1)
- Feuer (1)
- Finite element method (1)
- Fire (1)
- Foot (not a measure) (1)
- Form (1)
- Frau (1)
- Freight transport (1)
- Frequency (1)
- Frequenz (1)
- Fuel consumption (1)
- Future transport mode (1)
- Fuß (1)
- Gelenkfahrzeug (1)
- Grenzfläche (1)
- Grenzwert (1)
- Güterverkehr (1)
- Harmonization (1)
- Head (human) (1)
- Height (1)
- Herstellung (1)
- Hinten (1)
- Hubraum (1)
- Höhe (1)
- Hüfte (menschl) (1)
- Impact study (1)
- In Bewegung (1)
- Increase (1)
- Intelligentes Verkehrssystem (1)
- Intersection (1)
- Kleintransporter (1)
- Knotenpunkt (1)
- Kognitive Aufgabenanforderung (1)
- Kohlendioxid (1)
- Kompatiblität (1)
- Kontakt Reifen Straße (1)
- Kontrolle (1)
- Kopf (menschl) (1)
- Korrelation (math, stat) (1)
- Kraftstoffverbrauch (1)
- Laborexperiment (1)
- Landstraße (1)
- Lane changing (1)
- Layout (1)
- Leichnam (1)
- Limit (1)
- Location (1)
- Lärm (1)
- Man-machine interface (1)
- Manufacture (1)
- Market (1)
- Markt (1)
- Materialveränderung (allg) (1)
- Medical examination (1)
- Medizinische Untersuchung (1)
- Mensch-Maschine-Schnittstelle (1)
- Methode der finiten Elemente (1)
- Motorway (1)
- Moving (1)
- Nasse Straße (1)
- Noise (1)
- Notfall (1)
- Numerisches Modell (1)
- Oberfläche (1)
- Oberflächentextur (1)
- Optimum (1)
- Optische Anzeige (1)
- Organization (1)
- Organization (association) (1)
- Ort (Position) (1)
- Overlapping (1)
- Parkfläche (1)
- Pelvis (1)
- Pfahl (1)
- Pile (1)
- Productivity (1)
- Properties (1)
- Prüefverfahren (1)
- Public transport (1)
- Radio (1)
- Rammsondierung (1)
- Real time (1)
- Rear (1)
- Reconstruction (accid) (1)
- Reflectorized material (1)
- Reflexstoffe (1)
- Reifen (1)
- Richtlinien (1)
- Rippe (menschl) (1)
- Road marking (1)
- Robot (1)
- Roboter (1)
- Rundfunk (1)
- Rural road (1)
- Sachschaden (1)
- Safety fence (1)
- Safety glass (1)
- Schallpegel (1)
- Schnittstelle (1)
- Schulter (1)
- Schutzeinrichtung (1)
- Schweregrad /Unfall (1)
- Seite (1)
- Shape (1)
- Shoulder (human) (1)
- Sicherheitsglas (1)
- Side (1)
- Simulator (driving) (1)
- Size and weight regulations (1)
- Social factors (1)
- Sociology (1)
- Sound level (1)
- Soziale Faktoren (1)
- Soziologie (1)
- Spain (1)
- Spanien (1)
- Specification (standard ) (1)
- Specifications (1)
- Spectrum (1)
- Spektrum (1)
- Stadardization (1)
- Stadt (1)
- Stand der Technik (Bericht) (1)
- Standard (1)
- State of the art report (1)
- Steifigkeit (1)
- Stiffness (1)
- Strain gauge (1)
- Stress (1)
- Stress (psycho) (1)
- Surface (1)
- Surface texture (1)
- Surfacing (1)
- Surrogate driving set-up (1)
- Surveillance (1)
- Tactile perception (1)
- Tageslicht (1)
- Taktiles Signal (1)
- Telecommunication (1)
- Telekommunikation (1)
- Telematics (1)
- Telematik (1)
- Toter Winkel (1)
- Toxicity (1)
- Toxizität (1)
- Tracking task (1)
- Trackingaufgabe (1)
- Traffic control (1)
- Traffic regulation (1)
- Train (1)
- Typenzulassung (1)
- Tyre (1)
- USA (1)
- Unfallhäufigkeit (1)
- United Kingdom (1)
- United kingdom (1)
- Urban area (1)
- Vehicle lighting (1)
- Vehicle mile (1)
- Vehicle regulation (1)
- Veraenderung (1)
- Vergrößerung (1)
- Verkehrsstauung (1)
- Verkehrssteuerung (1)
- Verkehrswirtschaft (1)
- Vibration (1)
- Video camera (1)
- Vorne (1)
- Warning (1)
- Weather (1)
- Wet road (1)
- Winkel (1)
- Wirkungsanalyse (1)
- Wirtschaftlichkeit (1)
- Witterung (1)
- Woman (1)
- Zug (Eisenbahn) (1)
- Zugänglichkeit (1)
- Zukünftiges Verkehrsmittel (1)
- Zulassung (tech) (1)
- Zusammendrückung (1)
- Öffentlicher Verkehr (1)
- Überdeckung (1)
Institut
Test and assessment procedures for passive pedestrian protection based on developments by the European Enhanced Vehicle-safety Committee (EEVC) have been introduced in world-wide regulations and consumer test programmes, with considerable harmonization between these programmes. Nevertheless, latest accident investigations reveal a stagnation of pedestrian fatality numbers on European roads running the risk of not meeting the European Union- goal of halving the number of road fatalities by the year 2020. The branch of external road user safety within the EC-funded research project SENIORS under the HORIZON 2020 framework programme focuses on investigating the benefit of modifications to pedestrian test and assessment procedures and their impactors for vulnerable road users with focus on the elderly. Injury patterns of pedestrians and cyclists derived from the German In-Depth Accident Study (GIDAS) show a trend of AIS 2+ and AIS 3+ injuries getting more relevant for the thorax region in crashes with newer cars (Wisch et al., 2017), while maintaining the relevance for head and lower extremities. Several crash databases from Europe such as GIDAS and the Swedish Traffic Accident Data Acquisition (STRADA) also show that head, thorax and lower extremities are the key affected body regions not only for the average population but in particular for the elderly. Therefore, the SENIORS project is focusing on an improvement of currently available impactors and procedures in terms of biofidelity and injury assessment ability towards a better protection of the affected body regions, incorporating previous results from FP 6 project APROSYS and subsequent studies carried out by BASt. The paper describes the overall methodology to develop revised FE impactor models. Matched human body model and impactor simulations against generic test rigs provide transfer functions that will be used for the derivation of impactor criteria from human injury risk functions for the affected body regions. In a later step, the refined impactors will be validated by simulations against actual vehicle front-ends. Prototyping and adaptation of test and assessment procedures as well as an impact assessment will conclude the work of the project at the final stage. The work will contribute to an improved protection of vulnerable road users focusing on the elderly. The use of advanced human body models to develop applicable assessment criteria for the revised impactors is intended to cope with the paucity of actual biomechanical data focusing on elderly pedestrians. In order to achieve optimized results in the future, the improved test methods need to be implemented within an integrated approach, combining active with passive safety measures. In order to address the developments in road accidents and injury patterns of vulnerable road users, established test and assessment procedures need to be continuously verified and, where needed, to be revised. The demographic change as well as changes in the vehicle fleet, leading to a variation of accident scenarios, injury frequencies and injury patterns of vulnerable road users are addressed by the work provided by the SENIORS project, introducing updated impactors for pedestrian test and assessment procedures.
The goal of the project FIMCAR (Frontal Impact and Compatibility Assessment Research) was to define an integrated set of test procedures and associated metrics to assess a vehicle's frontal impact protection, which includes self- and partner-protection. For the development of the set, two different full-width tests (full-width deformable barrier [FWDB] test, full-width rigid barrier test) and three different offset tests (offset deformable barrier [ODB] test, progressive deformable barrier [PDB] test, moveable deformable barrier with the PDB barrier face [MPDB] test) have been investigated. Different compatibility assessment procedures were analysed and metrics for assessing structural interaction (structural alignment, vertical and horizontal load spreading) as well as several promising metrics for the PDB/MPDB barrier were developed. The final assessment approach consists of a combination of the most suitable full-width and offset tests. For the full-width test (FWDB), a metric was developed to address structural alignment based on load cell wall information in the first 40 ms of the test. For the offset test (ODB), the existing ECE R94 was chosen. Within the paper, an overview of the final assessment approach for the frontal impact test procedures and their development is given.
Road markings are an essential component of a safe road. In particular, the optical guidance at night and under wet conditions rates high. Special surface textures of road markings can enhance the nighttime visibility during wetness, but they can lead on the other hand to noise emission during passages of vehicles and thus annoy residents. In the present study the tyre/road marking noise is analysed based on two different measurement methods for traffic noise: Several different road markings with increased nighttime visibility during wetness were overrun and the noise was determined by controlled coast-by measurements as well as close-proximity measurements. For both measuring methods the averaged A-weighted sound pressure levels were determined and an analysis of the third octave spectra was performed in order to identify annoying tonal components. The results of both measurement methods were compared with each other. Limitations of the individual measurement methods were overcome by combining the data. Properties of road marking noise depending on the texture of the marking are discussed in relation to those of road surface noise. The results will help specifying road marking texture types that ensure less annoyance and at the same time good visibility at wetness and night-time.
Camera-monitor systems (CMS) can be used in motor vehicles to display the driver's rear view on a monitor mounted inside the vehicle. This also offers the possibility of replacing conventional exterior mirrors with suitable CMS and thereby implementing new design concepts with aerodynamic advantages. However, as exterior mirrors are safety-relevant vehicle parts for securing the driver's indirect rear view (requirements specified in UN Regulation No. 46), the question arises whether CMS can provide an equivalent substitute for mirrors. In the scope of this study, CMS and conventional exterior mirrors were compared and assessed in test drives and static tests under different external conditions. On the one hand, the examination of technical aspects, and on the other hand, issues pertaining to the design of the human-machine interaction, were the objects of the study. Two vehicles were available for the trials with passenger vehicles: A vehicle, manufactured in small series, which is already equipped with CMS as sole replacement for the exterior mirrors, as well as a compact class vehicle which had a CMS retrofitted by the car manufacturer in addition to conventionally used exterior mirrors. The latter could be covered exclusively for trips with CMS. A tractor unit with semitrailer was available for the truck trials. The driver's cabin was equipped with a CMS system developed by the vehicle manufacturer. In general, it was shown that it is possible to display the indirect rear view sufficiently for the driver, both for cars and trucks, using CMS which meet specific quality criteria. Depending on the design, it is even possible to receive more information about the rear space from a CMS than is possible with mirror systems. It was also shown that the change from mirrors to CMS requires a certain period of familiarisation. However, this period is relatively short and does not necessarily result in safety-critical situations.
This paper presents findings of a laboratory experiment which aimed at evaluating the sensitivity and intrusiveness of Tactile Detection Response Task (TDRT) methodology. Various single-task, dual-task and triple-task scenarios were compared. The task scenarios included a surrogate of driving (tracking task) and different secondary tasks (N-back, surrogate reference task (SuRT)). The results suggest that the TDRT is sensitive to load levels of secondary tasks which primarily demand for cognitive resources (N-back). Sensitivity to variations of visual"manual load could not be shown (SuRT). TDRT seems also to be able to differentiate between modes of primary task which varies in terms of cognitive load (visual against auditory tracking task). Results indicated intrusiveness of TDRT on primary task performance and secondary task performance depending on the type of underlying task scenario. As a conclusion, TDRT can be recommended as a method to assess attentional effects of cognitive load of a secondary task, but should be used with caution for secondary tasks with strong motor demands.
In the European Project FIMCAR, a proposal for a frontal impact test configuration was developed which included an additional full width deformable barrier (FWDB) test. Motivation for the deformable element was partly to measure structural forces as well as to produce a severe crash pulse different from that in the offset test. The objective of this study was to analyze the safety performance of vehicles in the full width rigid barrier test (FWRB) and in the full width deformable barrier test (FWDB). In total, 12 vehicles were crashed in both configurations. Comparison of these tests to real world accident data was used to identify the crash barrier most representative of real world crashes. For all vehicles, the airbag visible times were later in the FWDB configuration. This was attributed to the attenuation of the initial acceleration peak, observed in FWRB tests, by the addition of the deformable element. These findings were in alignment with airbag triggering times seen in real world crash data. Also, the dummy loadings were slightly worse in FWDB compared to FWRB tests, which is possibly linked to the airbag firing and a more realistic loading of the vehicle crash structures in the FWDB configuration. Evaluations of the lower extremities have shown a general increasing of the tibia index with the crash pulse severity.
Within the automotive context camera monitor systems (CMS) can be used to present views of the traffic situation behind the vehicle to the driver via a monitor mounted inside the cabin. This offers the opportunity to replace classical outside rearview mirrors and therefore to implement new design concepts, aerodynamically optimized vehicle shapes and to reduce the width of the vehicle. Further, the use of a CMS offers the potential to implement functionalities like warnings or situation-adaptive fields of view that are not feasible with conventional rearview mirrors. Despite these potential advantages, it is important to consider the possible technical constraints of this technology and its effect on driver perception and behavior. On the technical side next to the field of view and die robustness of die system, aspects as its functionality at day and night as well as under varying weather conditions should be object to scientific investigation. Concerning human machine interaction, it has to be considered, that the perception of velocities and distances of approaching vehicles might be different for CMS as compared to conventional rearview mirrors and potential influences of factors as the Position of the displays or drivers' age should be taken into account. In order to shed light on these and further open issues, BASt is currently conducting a study that will cover the use of CMS under controlled conditions as well in real traffic. The first part of the study will focus on passenger cars, while in a second step the empirical investigation will be extended to heavy goods vehicles, where the potentials as well as the limitations of CMS might differ considerably. The presentation will cover the first part, with regard to the experimental design, implementation and initial results if already available.
To improve vehicle safety in frontal collisions, the crash compatibility between the colliding vehicles is crucial. Compatibility aims to improve both the self and partner protection properties of vehicles. Although compatibility has received worldwide attention for many years, no final assessment approach has been defined. Within the Frontal Impact and Compatibility Assessment Research (FIMCAR) project, different frontal impact test procedures (offset deformable barrier [ODB] test as currently used for Economic Commission for Europe [ECE] R94, progressive deformable barrier test as proposed by France for a new ECE regulation, moveable deformable barrier test as discussed worldwide, full-width rigid barrier test as used in Federal Motor Vehicle Safety Standard [FMVSS] 208, and full-width deformable barrier test) were analyzed regarding their potential for future frontal impact legislation. The research activities focused on car-to-car frontal impact accidents based on accident investigations involving newer cars. Test procedures were developed with both a crash test program and numerical simulations. The proposal from FIMCAR is to use a full-width test procedure with a deformable element and compatibility metrics in combination with the current offset test as a frontal impact assessment approach that also addresses compatibility. By adding a full-width test to the current ODB test it is possible to better address the issues of structural misalignment and injuries resulting from high acceleration accidents as observed in the current fleet. The estimated benefit ranges from a 5 to 12 percent reduction of fatalities and serious injuries resulting from frontal impact accidents. By using a deformable element in the full-width test, the test conditions are more representative of real-world situations with respect to acceleration pulse, restraint system triggering time, and deformation pattern of the front structure. The test results are therefore expected to better represent real-world performance of the tested car. Furthermore, the assessment of the structural alignment is more robust than in the rigid wall test.
The strong prevalence of human error as a crash causation factor in motorcycle accidents calls for countermeasures that help tackling this issue. Advanced rider assistance systems pursue this goal, providing the riders with support and thus contributing to the prevention of crashes. However, the systems can only enhance riding safety if the riders use them. For this reason, acceptance is a decisive aspect to be considered in the development process of such systems. In order to be able to improve behavioural acceptance, the factors that influence the intention to use the system need to be identified. This paper examines the particularities of motorcycle riding and the characteristics of this user group that should be considered when predicting the acceptance of advanced rider assistance systems. Founded on theories predicting behavioural intention, the acceptance of technologies and the acceptance of driver support systems, a model on the acceptance of advanced rider assistance systems is proposed, including the perceived safety when riding without support, the interface design and the social norm as determinants of the usage intention. Since actual usage cannot be measured in the development stage of the systems, the willingness to have the system installed on the own motorcycle and the willingness to pay for the system are analyzed, constituting relevant conditions that allow for actual usage at a later stage. Its validation with the results from user tests on four advanced rider assistance systems allows confirming the social norm and the interface design as powerful predictors of the acceptance of ARAS, while the extent of perceived safety when riding without support did not have any predictive value in the present study.
The United Nations Economic Commission for Europe Informal Group on GTR No. 7 Phase 2 are working to define a build level for the BioRID II rear impact (whiplash) crash test dummy that ensures repeatable and reproducible performance in a test procedure that has been proposed for future legislation. This includes the specification of dummy hardware, as well as the development of comprehensive certification procedures for the dummy. This study evaluated whether the dummy build level and certification procedures deliver the desired level of repeatability and reproducibility. A custom-designed laboratory seat was made using the seat base, back, and head restraint from a production car seat to ensure a representative interface with the dummy. The seat back was reinforced for use in multiple tests and the recliner mechanism was replaced by an external spring-damper mechanism. A total of 65 tests were performed with 6 BioRID IIg dummies using the draft GTR No.7 sled pulse and seating procedure. All dummies were subject to the build, maintenance, and certification procedures defined by the Informal Group. The test condition was highly repeatable, with a very repeatable pulse, a well-controlled seat back response, and minimal observed degradation of seat foams. The results showed qualitatively reasonable repeatability and reproducibility for the upper torso and head accelerations, as well as for T1 Fx and upper neck Fx. However, reproducibility was not acceptable for T1 and upper neck Fz or for T1 and upper neck My. The Informal Group has not selected injury or seat assessment criteria for use with BioRID II, so it is not known whether these channels would be used in the regulation. However, the ramping-up behavior of the dummy showed poor reproducibility, which would be expected to affect the reproducibility of dummy measurements in general. Pelvis and spine characteristics were found to significantly influence the dummy measurements for which poor reproducibility was observed. It was also observed that the primary neck response in these tests was flexion, not extension. This correlates well with recent findings from Japan and the United States showing a correlation between neck flexion and injury in accident replication simulations and postmortem human subjects (PMHS) studies, respectively. The present certification tests may not adequately control front cervical spine bumper characteristics, which are important for neck flexion response. The certification sled test also does not include the pelvis and so cannot be used to control pelvis response and does not substantially load the lumbar bumpers and so does not control these parts of the dummy. The stiffness of all spine bumpers and of the pelvis flesh should be much more tightly controlled. It is recommended that a method for certifying the front cervical bumpers should be developed. Recommendations are also made for tighter tolerance on the input parameters for the existing certification tests.