91 Fahrzeugkonstruktion
Filtern
Erscheinungsjahr
Dokumenttyp
- Konferenzveröffentlichung (82) (entfernen)
Schlagworte
- Conference (27)
- Konferenz (26)
- Test method (26)
- Prüfverfahren (25)
- Safety (25)
- Sicherheit (25)
- Anfahrversuch (24)
- Impact test (veh) (24)
- Bewertung (22)
- Evaluation (assessment) (22)
- Fahrzeug (22)
- Fußgänger (22)
- Pedestrian (22)
- Vehicle (21)
- Anthropometric dummy (16)
- Collision (16)
- Dummy (16)
- Accident (15)
- Simulation (15)
- Unfall (15)
- Zusammenstoß (14)
- Frontalzusammenstoß (12)
- Deutschland (11)
- Germany (11)
- Head on collision (11)
- Analyse (math) (10)
- Analysis (math) (10)
- Driver assistance system (10)
- Fahrerassistenzsystem (10)
- Schweregrad (Unfall, Verletzung) (10)
- Biomechanics (9)
- Biomechanik (9)
- Car (9)
- Child (9)
- Kind (9)
- Passives Sicherheitssystem (9)
- Radfahrer (9)
- Severity (accid, injury) (9)
- Active safety system (8)
- Aktives Sicherheitssystem (8)
- Autonomes Fahren (8)
- Autonomous driving (8)
- Europa (8)
- Europe (8)
- Kompatibilität (8)
- Passive safety system (8)
- Technische Vorschriften (Kraftfahrzeug) (8)
- Vehicle regulations (8)
- Versuch (8)
- Automatic (7)
- Automatisch (7)
- Compatibility (7)
- Cyclist (7)
- Driver (7)
- Fahrer (7)
- Forschungsarbeit (7)
- Improvement (7)
- Pkw (7)
- Research project (7)
- Test (7)
- Verbesserung (7)
- Bemessung (6)
- Design (overall design) (6)
- Seitlicher Zusammenstoß (6)
- Severity (accid (6)
- Side impact (6)
- Standardisierung (6)
- Wirtschaftlichkeitsrechnung (6)
- injury) (6)
- Collision avoidance system (5)
- Cost benefit analysis (5)
- Deformierbare Barriere (Anpralltest) (5)
- Fahrstabilität (5)
- Gesetzgebung (5)
- Head (5)
- Injury (5)
- Insasse (5)
- Knee (human) (5)
- Kopf (5)
- Legislation (5)
- Lkw (5)
- Lorry (5)
- Official approval (5)
- Vehicle handling (5)
- Vehicle occupant (5)
- Verletzung (5)
- Verletzung) (5)
- Accident prevention (4)
- Antikollisionssystem (4)
- Brustkorb (4)
- Datenbank (4)
- Development (4)
- Efficiency (4)
- Entwicklung (4)
- Leistungsfähigkeit (allg) (4)
- Modification (4)
- Prevention (4)
- Reproducibility (4)
- Reproduzierbarkeit (4)
- Schweregrad (Unfall (4)
- Standardization (4)
- Technologie (4)
- Technology (4)
- Thorax (4)
- Unfallverhütung (4)
- Alte Leute (3)
- Aufprallschlitten (3)
- Ausrüstung (3)
- Bein (menschl) (3)
- Belastung (3)
- Benutzung (3)
- Body (car) (3)
- Database (3)
- Decrease (3)
- Deformable barrier (impact test) (3)
- Deformation (3)
- EU (3)
- Equipment (3)
- Error (3)
- Fahrzeugführung (3)
- Fahrzeuginnenraum (3)
- Fahrzeugsitz (3)
- Fehler (3)
- Human body (3)
- Impact sled (3)
- Intelligent transport system (3)
- Interior (veh) (3)
- Karosserie (3)
- Knie (menschl) (3)
- Leg (human) (3)
- Lenken (Fahrzeug) (3)
- Load (3)
- Menschlicher Körper (3)
- Method (3)
- Motorcycle (3)
- Motorrad (3)
- Safety belt (3)
- Seat (veh) (3)
- Sicherheitsgurt (3)
- Steering (process) (3)
- Unterfahrschutz (3)
- Use (3)
- Verfahren (3)
- Verhütung (3)
- Verminderung (3)
- Veränderung (3)
- Active safety (2)
- Airbag (2)
- Aktive Sicherheit (2)
- Autonomes Fahrzeug (2)
- Autonomous vehicle (2)
- Baumusterzulassung (2)
- Behaviour (2)
- Bicyclist (2)
- Braking (2)
- Bremsung (2)
- Cause (2)
- Classification (2)
- Crashtest (2)
- Data acquisition (2)
- Datenerfassung (2)
- Detection (2)
- Detektion (2)
- Driver information (2)
- Driving (veh) (2)
- Empfindlichkeit (2)
- Fahrerinformation (2)
- Fatality (2)
- Forecast (2)
- Front (2)
- Geschwindigkeit (2)
- Gewicht (2)
- Headlamp (2)
- Hinten (2)
- Impact test (2)
- Individueller Verkehr (2)
- Information (2)
- Intelligentes Transportsystem (2)
- International (2)
- Klassifizierung (2)
- Knie (2)
- Kraftfahrzeug (2)
- Mathematical model (2)
- Measurement (2)
- Messung (2)
- Nacht (2)
- Night (2)
- Norm (tech) (2)
- Old people (2)
- Private transport (2)
- Prognose (2)
- Prototyp (2)
- Prototype (2)
- Rear (2)
- Rechenmodell (2)
- Richtlinien (2)
- Risiko (2)
- Risk (2)
- Road user (2)
- Sample (mater) (2)
- Scheinwerfer (2)
- Schutz (2)
- Sensitivity (2)
- Sensor (2)
- Specification (standard) (2)
- Specifications (2)
- Speed (2)
- Statistics (2)
- Statistik (2)
- Tödlicher Unfall (2)
- Underride protection (2)
- Unfallrekonstruktion (2)
- Ursache (2)
- Vereinigtes Königreich (2)
- Verformung (2)
- Verhalten (2)
- Verkehrsteilnehmer (2)
- Warning (2)
- Warnung (2)
- Weight (2)
- Zulassung (tech) (2)
- Zusammenstoss (2)
- Abdomen (1)
- Abstandsregeltempomat (1)
- Accident data (1)
- Accident rate (1)
- Accident reconstruction (1)
- Adaptive cruise control (1)
- Adult (1)
- Aged people (1)
- Air bag (restraint system) (1)
- Angle (1)
- Anti locking device (1)
- Antiblockiereinrichtung (1)
- Antikollisisonssystem (1)
- Apparatus (measurement) (1)
- Arbeitsgruppe (1)
- Auffahrunfall (1)
- Autobahn (1)
- Battery (1)
- Bau (1)
- Benefit cost analysis (1)
- Bicycle (1)
- Bildschirm (1)
- Blind spot (veh) (1)
- Brake (1)
- Bremse (1)
- Bruch (mech) (1)
- Bus (1)
- Calibration (1)
- Chassis (1)
- Comfort (1)
- Communication (1)
- Compatiblity (1)
- Components of the vehicle (1)
- Compression (1)
- Construction (1)
- Cooperative intelligent transport system (1)
- Correlation (math, stat) (1)
- Crash Test (1)
- Crash helmet (1)
- Crossing the road (pedestrian) (1)
- Data bank (1)
- Data processing (1)
- Data security (1)
- Data transmission (1)
- Datensicherheit (1)
- Datenverarbeitung (1)
- Datenübertragung (telekom) (1)
- Dauerhaftigkeit (1)
- Daylight (1)
- Deformable barrier (Impact test) (1)
- Deformable barrier system (impact test) (1)
- Dehnungsmessstreifen (1)
- Delivery vehicle (1)
- Demographie (1)
- Diesel engine (1)
- Dieselmotor (1)
- Digital model (1)
- Driving (1)
- Durability (1)
- Dynamo (1)
- Echtzeit (1)
- Eichung (1)
- Electric vehicle (1)
- Electronic stability program (1)
- Elektrofahrzeug (1)
- Elektronische Fahrhilfe (1)
- Elektronisches Stabilitätsprogramm (1)
- Emission control (1)
- Emissionskontrolle (1)
- Engine capacity (1)
- Ergonomics (1)
- Erwachsener (1)
- European New Car Assessment Programme (1)
- Fahrbahnüberquerung (1)
- Fahrleistung (1)
- Fahrrad (1)
- Fahrstreifen (1)
- Fahrstreifenwechsel (1)
- Fahrwerk (1)
- Fahrzeugbeleuchtung (1)
- Fahrzeugteile (1)
- Failure (1)
- Feuer (1)
- Finite element method (1)
- Fire (1)
- Form (1)
- Frau (1)
- Future transport mode (1)
- Gestaltung (1)
- Grenzwert (1)
- Harmonisation (1)
- Harmonisierung (1)
- Harmonization (1)
- Head (human) (1)
- Height (1)
- Hubraum (1)
- Höhe (1)
- Hüfte (menschl) (1)
- Impact study (1)
- In Bewegung (1)
- Information documentation (1)
- Information management (1)
- Intelligentes Verkehrssystem (1)
- Interactive model (1)
- Interaktives Modell (1)
- Intersection (1)
- Kamera (1)
- Kleintransporter (1)
- Knotenpunkt (1)
- Komfort (1)
- Kommunikation (1)
- Kompatiblität (1)
- Kooperatives System (ITS) (1)
- Kopf (menschl) (1)
- Korrelation (math, stat) (1)
- Kunststoff (1)
- Landstraße (1)
- Lane changing (1)
- Layout (1)
- Leuchtdichte (1)
- Limit (1)
- Luminance (1)
- Mensch Maschine Verhältnis (1)
- Messgerät (1)
- Methode der finiten Elemente (1)
- Motorway (1)
- Moving (1)
- Naturalistic Driving (1)
- Naturalistic driving (1)
- Numerisches Modell (1)
- Organisation (1)
- Organization (1)
- Overlapping (1)
- Pelvis (1)
- Perception (1)
- Pfahl (1)
- Pile (1)
- Plastic material (1)
- Population (1)
- Probe (1)
- Prüefverfahren (1)
- Prüfkörper (1)
- Public transport (1)
- Quality (1)
- Quality assurance (1)
- Qualität (1)
- Qualitätssicherung (1)
- Radio (1)
- Real time (1)
- Rear end collision (1)
- Rear view mirror (1)
- Reconstruction (accid) (1)
- Reflectorized material (1)
- Reflexstoffe (1)
- Reifen (1)
- Rippe (menschl) (1)
- Road traffic (1)
- Robot (1)
- Roboter (1)
- Route guidance (1)
- Rundfunk (1)
- Rural road (1)
- Rückspiegel (1)
- Schulter (1)
- Schutzhelm (1)
- Schweregrad /Unfall (1)
- Seite (1)
- Shape (1)
- Shoulder (human) (1)
- Sichtbarkeit (1)
- Side (1)
- Social factors (1)
- Soziale Faktoren (1)
- Stadardization (1)
- Stadt (1)
- Stand der Technik (Bericht) (1)
- State of the art report (1)
- Steifigkeit (1)
- Stiffness (1)
- Strain gauge (1)
- Straßenverkehr (1)
- Tageslicht (1)
- Technische Vorschriften (1)
- Telecommunication (1)
- Telekommunikation (1)
- Tests (1)
- Toter Winkel (1)
- Toxicity (1)
- Toxizität (1)
- Traffic (1)
- Traffic control (1)
- Traffic lanes (1)
- Train (1)
- Typenzulassung (1)
- Tyre (1)
- Underride prevention (1)
- Unfalldaten (1)
- Unfallhäufigkeit (1)
- United Kingdom (1)
- United kingdom (1)
- Unterleib (1)
- Urban area (1)
- Vehicle Regulations (1)
- Vehicle lighting (1)
- Vehicle mile (1)
- Veraenderung (1)
- Verkehr (1)
- Verkehrssteuerung (1)
- Video camera (1)
- Sichtbarkeit (1)
- Visual display (1)
- Vorn (1)
- Vorne (1)
- Wahrnehmung (1)
- Windschutzscheibe (1)
- Windscreen (veh) (1)
- Winkel (1)
- Wirkungsanalyse (1)
- Woman (1)
- Working group (1)
- Zielführungssystem (1)
- Zug (Eisenbahn) (1)
- Zukünftiges Verkehrsmittel (1)
- Zusammendrückung (1)
- Öffentlicher Verkehr (1)
- Überdeckung (1)
Institut
- Abteilung Fahrzeugtechnik (82) (entfernen)
Except for corrective steering functions automatic steering is up to now only allowed at speeds up to 10 km/h according to UN Regulation No. 79. Progress in automotive engineering with regard to driver assistance systems and automation of driving tasks is that far that it would be technically feasible to realise automatically commanded steering functions also at higher vehicle speeds. Besides improvements in terms of comfort these automated systems are expected to contribute to road traffic safety as well. However, this safety potential will only be exhausted if automated steering systems are properly designed. Especially possible new risks due to automated steering have to be addressed and reduced to a minimum. For these reasons work is currently ongoing on UNECE level with the aim to amend the regulation dealing with provisions concerning the approval of steering equipment. It is the aim to revise requirements for automatically commanded steering functions (ACSF) so that they can be approved also for higher speeds if certain performance requirements are fulfilled. The paper at hand describes the derivation of reasonable system specifications from an analysis of relevant driving situations with an automated steering system. Needs are explained with regard to covering normal driving, sudden unexpected critical events, transition to manual driving, driver availability and manoeuvres to reach a state of minimal risk. These issues form the basis for the development of test procedures for automated steering to be implemented in international regulations. This holds for system functionalities like automatic lane keeping or automatic lane change as well as for addressing transition situations in which the system has to hand over steering to the driver or addressing emergency situations in which the system has to react instead of the driver.
Although the bus belongs to the safest traffic means, single accidents can be particularly severe and concern many passengers. Especially in case of fires a high number of injured and killed persons can be the outcome. Fire safety of buses therefore is of high importance. With the increase of synthetic and plastic materials as a material for the interior equipment of buses and coaches because of their ood mechanical properties combined with low weight, the question arises whether the safety level has decreased in case of a fire during the last years - also compared to other means of transport. Because of the combustible plastics and their ability to release a high amount of heat the main fire load in buses is no longer the fuel but the plastic materials which are also often easy to ignite. Besides the flammability of the equipments, the production of smoke, the smoke development and propagation and its toxicity for the people as well as the testing methods and limit values are of interest. For those reasons research projects were initiated on behalf of the German Federal Highway Research Institute. At the one hand the fire behavior of coach interiors was examined in general focusing on fire propagation as well as fire detection and signalling. As result, recommendations with regard to early fire detection systems for the engine compartments and on-board extinguishing equipment were elaborated. At the other hand research is carried out to examine heat release, smoke, smoke propagation and its toxicity due to burning bus interior materials. The paper describes which effective and economically reasonable fire safety requirements for interiors of buses would improve the current situation. Proposals for amendments of current requirements are recommended including the specification of appropriate limit values. In particular, it is taken into consideration which reasonable fire safety standards from other transport sectors, especially the rail sector, should be transferred to buses.
Since 2005 the German In-Depth Accident Study (GIDAS) also records aspects of active vehicle safety. This is done because vehicles are fitted with an increasing number of active safety devices which have undoubtedly an influence on the number, severity and course of accidents. Accident researchers expect that collecting active safety data will facilitate to assess and quantify the impact of these and future devices. It is the aim of this paper to outline benefits and limitations associated with the recording of active safety aspects within indepth studies. An overview about possible areas where active safety data can be useful will be given. For that purpose single safety or comfort systems will be selected to estimate the effects of an accident database which includes variables associated with these systems. Questions with regard to the limitations of collecting active safety data will be addressed. Possible items are for example the usability of the data recorded, the real accident cause, the small number of relevant accidents, the time span needed to gather a sufficient dataset, the small share of vehicles equipped with a certain system or different functionalities of systems that are supposed to fall in the same category. As a result user needs for a reasonable data collection of active safety elements will be elaborated.
Fahrerassistenzsysteme unterstützen den Fahrer durch Information, Warnung oder Eingriff in die Fahrzeugsteuerung. Zukünftige Systeme zur Kollisionsvermeidung oder bis hin zum automatischen Fahren werden den Fahrer immer mehr entlasten. Wegen ihres erheblichen Potenzials zur Verbesserung vor allem der aktiven Sicherheit können die Fahrerassistenzsysteme wesentlich zur Vermeidung von Unfällen oder der Reduktion von Unfallfolgen beitragen. Andererseits können Fahrerassistenzsysteme aufgrund des komplexen Systemzusammenhangs zwischen Fahrer, Fahrzeug und Umwelt negative Auswirkungen auf das Verkehrsgeschehen haben. Dieser Aspekt muss schon bei der Entwicklung der Systeme berücksichtigt werden. Die Empfehlung der Europäischen Kommission zur Gestaltung von Informations- und Kommunikationssystemen gibt dazu Leitlinien vor. Die BASt ist mit der wissenschaftlichen Begleitung der Thematik beauftragt. Die Industrie ist dazu aufgefordert darzulegen, welche Maßnahmen zur Einhaltung der Grundsätze ergriffen worden sind beziehungsweise werden. Um das Potenzial der Fahrerassistenzsysteme zur Steigerung der Verkehrssicherheit voll ausschöpfen zu können, sind weiterhin Forschungsarbeiten zur Entwicklung neuer und zur Weiterentwicklung bestehender Systeme unter Berücksichtigung der Gestaltungsanforderungen für sichere Assistenzsysteme durchzuführen.
In the last years there has been a decline in accident figures in Germany especially for four wheeled vehicles. At the same time, accident figures for motorcycles remained nearly constant. About 17 % of road traffic fatalities in the year 2006 were motorcyclists. 33 % of these riders were killed in single vehicle crashes. This leads to the conclusion that improving driving dynamics and driving stability of powered two wheelers would yield considerable safety gains. However, the well-known measures for cars and trucks with their proven effectiveness cannot be transferred easily to motorcycles. Therefore studies were carried out to examine the safety potential of Anti Lock Braking Systems (ABS) and Vehicle Stability Control (VSC) for motorcycles by means of accident analysis, driving tests and economical as well as technical assessment of the systems. With regard to ABS, test persons were assigned braking tasks (straight and in-curve) with five different brake systems with and without ABS. Stopping distances as well as stress and strain on the riders were measured for 9 test riders who completed 105 braking manoeuvres each. Knowing the ability of ABS to avoid falls during braking in advance of a crash and taking into account the system costs, a cost benefit analysis for ABS for motorcycles was carried out for different market penetration of ABS, i.e. equipment rates, and different time horizons. The potential of VSC for motorcycles was estimated in two steps. First the kinds of accidents that could be prevented by such a system at all have been analysed. For these accident configurations, simulations and driving tests were then performed to determine if a VSC was able to detect the critical driving situation and if it was technically possible to implement an actuator which would help to stabilise the critical situation.
The levels of continuous vehicle automation have become common knowledge. They facilitate overall understanding of the issue. Yet, continuous vehicle automation described therein does not cover "automated driving" as a whole: Functions intervening temporarily in accident-prone situations can obviously not be classified by means of continuous levels. Continuous automation describes the shift in workload from purely human driven vehicles to full automation. Duties of the driver are assigned to the machine as automation levels rise. Emergency braking, e.g., is obviously discontinuous and intensive automation. It cannot be classified under this regime. The resulting absence of visibility of these important functions cannot satisfy " especially in the light of effect they take on traffic safety. Therefore, in order to reach a full picture of vehicle automation, a comprehensive approach is proposed that can map out different characteristics as "Principle of Operation" at top level. On this basis informing and warning functions as well as functions intervening only temporarily in near-accident situations can be described. To reach a complete picture, levels for the discontinuous, temporarily intervening functions are proposed " meant to be the counterpart of the continuous levels already in place. This results in a detailed and independent classification for accident-prone situations. This finally provides for the visibility these important functions deserve.
Automated driving will provide many kinds of benefits - some direct and some indirect. The benefits originate at the individual level, from changes in the behaviour of drivers and travellers with regard to driving and mobility, ending up with benefits at the social level via changes in the whole transport system and society, where many of the current planning and operations paradigms are likely to be transformed by automated driving. There may also be disbenefits, particularly at a social level, for example in intensity of travel which could result in additional congestion and increased use of natural resources. There may also be unintended consequences. For example, we do not know the impacts on public transport: driverless vehicles could provide a means to a lower cost service provision, but the availability of automated cars could lead to more car travel at the expense of collective transport.
The development of tyre- and truck-manufacturers leads to the direction to introduce wide base single tyres (size 495/45R22,5) instead of twin tyres on the driving axle of trucks, tractors and busses. To study the driving behaviour and safety of various trucks and units with different tyre combinations and loading conditions was the aim of the study. A computer-aided simulation was used for this investigation. Drive tests with a 40 t unit with prototype single tyres on the drive axle were carried out to verify the simulation. Alterations in driving behaviour and driving safety are mainly dependent on the tyre cornering stiffness. The prototype wide single tyres had a higher lateral stiffness which leads to a higher degree of under-steering (safer driving behaviour). The altered spring base on the drive axle had no influence on the side- tilt stability of vehicle combinations but the solo truck profited from the higher rear axle roll stiffness (less danger for roll-over accidents). As far as the driving safety is concerned nothing speaks against wide base tyres on the drive axle. The simulation of a tyre defect in a bend (assuming 40% of the max. transferable side force for the flat tyre) showed no increased danger using wide single tyres. Later driving tests showed however the need of tyre run flat possibilities to avoid jack-knifing of road trains. Also tyre pressure monitoring systems and electronic stability programs for the trucks are advised.
Since integrated safety systems combine active and passive safety elements in one safety system, it is necessary to define new procedures to evaluate vehicle safety from the overall system point of view. The main goal of the ASSESS project is to develop harmonized and standardized assessment procedures for collision mitigation and avoidance systems. Methods and Data Sources: In ASSESS, procedures are developed for: driver behaviour evaluation, pre-crash system performance evaluation, crash performance evaluation, socio-economic assessment. This paper will concentrate on the activities related to the crash evaluation. The objective is to perform simulations, sled tests and crash tests in order tounderstand the influence of the activation of the pre-crash systems on the occupants" injuries during the crash phase. When a traffic accident is unavoidable, pre-crash systems work on various safety devices in order to improve the vehicle occupants" protection. Braking assistance and adaptive restraint systems are the main pre-crash systems whose effect on the occupants" protection will be described in this paper. Results: The results will be a description of the effect of the activation of the pre-crash systems on the crash phase. Additionally, a set of recommendations for future methodology developments will be delivered. Furthermore, a first approach to the study of the effect of the pre-crash systems activation on the occupants" protection when the impact is unavoidable will be presented. This effect will be quantified using the biomechanical values obtained from the simulation and testing activities and their related injury risks. Simulation and testing activities will consider the following scenarios: - No activation of any pre-crash system, - Activation of one or a combination of several pre-crash systems. In this way, differences in the results obtained from different scenarios will show the effect of each pre-crash system separately during the crash phase. Discussion and Limitations: The set of activities developed in this research project is limited by the fact that with the given resources only a limited number of vehicle models could be investigated. In addition, there are also limitations related to the injury risk curves and the passive safety tools currently on the market. Conclusion and Relevance to session submitted: The paper will present a complete analysis of the effect of pre-crash systems during the crash phase when the impact is unavoidable. Details, limitations and first application experience based on a few examples will be discussed. Currently, there is not any regulation, assessment program, or other similar official procedure able to assess pre-crash systems during the crash phase. This project comprises phases of traffic accidents which have been historically analysed separately, and aims to evaluate them taking into account their interrelationship. ASSESS is one of the first European projects which deals in depth with the concept of integrated safety, defining methodologies to analyse vehicle safety from a global point of view.
The European Enhanced Vehicle-safety Committee wants to promote the use of more biofidelic child dummies and biomechanical based tolerance limits in regulatory and consumer testing. This study has investigated the feasibility and potential impact of Q-dummies and new injury criteria for child restraint system assessment in frontal impact. European accident statistics have been reviewed for all ECE-R44 CRS groups. For frontal impact, injury measures are recommended for the head, neck, chest and abdomen. Priority of body segment protection depends on the ECE-R44 group. The Q-dummy family is able to reflect these injuries, because of its biofidelity performance and measurement capabilities for these body segments. Currently, the Q0, Q1, Q1.5, Q3 and Q6 are available representing children of 0, 1, 1.5, 3 and 6 years old. These Q-dummies cover almost all dummy weight groups as defined in ECE-R44. Q10, representing a 10 year-old child, is under development. New child dummy injury criteria are under discussion in EEVC WG12. Therefore, the ECE-R44 criteria are assessed by comparing the existing P-dummies and new Q-dummies in ECE-R44 frontal impact sled tests. In total 300 tests covering 30 CRSs of almost all existing child seat categories are performed by 11 European organizations. From this benchmark study, it is concluded that the performance of the Q-dummy family is good with respect to repeatability of the measurement signals and the durability of the dummies. Applying ECE-R44 criteria, the first impression is that results for P- and Q-dummy are similar. For child seat evaluation the potential merits of the Q-dummy family lie in the extra measurement possibilities of these dummies and in the more biofidelic response.
For the assessment of vehicle safety in frontal collisions, the crash compatibility between the colliding vehicles is crucial. Compatibility compromises both the self protection and the partner protection properties of vehicles. For the accident data analysis, the CCIS (GB) and GIDAS (DE) in-depth data bases were used. Selection criteria were frontal car accidents with car in compliance with ECE R94. For this study belted adult occupants in the front seats sustaining MAIS 2+ injuries were studied. Following this analysis FIMCAR concluded that the following compatibility issues are relevant: - Poor structural interaction (especially low overlap and over/underriding) - Compartment strength - Frontal force mismatch with lower priority than poor structural interaction In addition injuries arising from the acceleration loading of the occupant are present in a significant portion of frontal crashes. Based on the findings of the accident analysis the aims that shall be addressed by the proposed assessment approach were defined and priorities were allocated to them. The aims and priorities shall help to decide on suitable test procedures and appropriate metrics. In general it is anticipated that a full overlap and off-set test procedure is the most appropriate set of tests to assess a vehicle- frontal impact self and partner protection.
Within the process of integrating passenger airbags in the vehicle fleet a problem of compatibility between the passenger airbag and rear-facing child restraint systems was recognised. Especially in the US several accidents with children killed by the passenger airbag were recorded. Taking into account these accidents the deactivation of a present passenger airbag is mandatory if a child is carried in a rear-facing child restraint system at the front passenger seat in all member states of the European Union. This rule is in force since the deadline of 2003/20/EC at the latest. In the past a passenger airbag either could not be disabled or could only be disabled by a garage. Today there are a lot of different possibilities for the car driver himself to disable the airbag. Solutions like an on/off-switch or the automatic detection of a child restraint system are mentioned as an example. Taking into account the need for the deactivation of front passenger airbags two types of misuse can occur: transportation of an infant while the airbag is (still) enabled and transportation of an adult, while the airbag is disabled, respectively. Within a research project funded by BASt both options of misuse were analysed utilising two different types of surveys amongst users (field observations and interviews, Internet-questionnaires). In addition both analysis of accident data and crash tests for an updated assessment of the injury risk caused by the front passenger airbag were conducted. Both surveys indicate a low risk of misuse. Most of the misuse cases were observed in older cars, which offer no easy way to disable the airbag. For systems, which detect a child seat automatically, no misuse could be found. The majority of misuses in cars equipped with a manual switch were caused by reasons of oblivion. Also the accident analysis indicates a minor risk of misuse. From more than 300 cases of the GIDAS accident sample that were analysed, only 24 children were using the front passenger seat in cars equipped with a front passenger airbag. In most of these cases the airbag was deactivated. When misuse occurred the injury severity was low. However, when analysing German single accidents the fatality risk caused by the front passenger airbag became obvious. From the technical point of view, there were important changes in the design of passenger airbags in recent years. Not only volume and shape were modified, but also the mounting position of the entire airbag module was changed fundamentally. Even if these findings do not allow obtaining general conclusions, a clear tendency of less danger by airbags could be identified. For future vehicle development a safe combination of airbags and rear faced baby seats seems to be possible in the long term. This would mean that both types of misuse could be eliminated. For parents an easier use of child seat and car would be the result.
In der Europäischen Union (EU) gab es 1999 circa 1,3 Millionen Straßenverkehrsunfälle mit Personenschaden, wobei circa 42.000 Personen getötet wurden. Ziel der EU ist es diese Zahl auf 25.000 im Jahr 2010 zu senken. Die EEVC befasst sich bereits seit Anfang der 80er Jahre mit der Thematik Fußgängerschutz in verschiedenen Arbeitsgruppen. Im Dezember 1998 legte die EEVC-Arbeitsgruppe 17 "Fußgängersicherheit" ihren Abschlussbericht vor, in dessen Anhang ein Prüfverfahren zum fahrzeugseitigen Fußgängerschutz enthalten ist. Dieses Prüfverfahren wird vorgestellt. Es basiert auf Komponententests. Unterschieden werden drei Prüfkörperarten und insgesamt vier Prüfkörper. Aus wissenschaftlicher Sicht und aus Sicht der Unfallforschung empfiehlt die EEVC-Arbeitsgruppe 17 eine umfassende Einführung des vorgeschlagenen Prüfverfahrens mit allen Prüfkörpern, gegebenenfalls in Form einer stufenweisen Einführung.
Many big cities in Europe and elsewhere in the world have problems managing the traffic especially during rush hours. The improvement of the parking problematic and environmental protection as well are important aspects for the future traffic design of urban areas. To improve the traffic situation the development of new traffic concepts and alternative vehicles are required. The BMW company has developed a new type of two-wheel vehicle. This two-wheeler constitutes a totally new concept. BMW implemented a lot of safety features, such as a structure made up of rollover bars and a crush element instead of a front protecting plate. Furthermore the driver can secure himself with two safety belts. The paper contains a description of the novel two-wheel vehicle concept designed so far. BMW's concept and the safety features are also explained. The Federal Highway Research Institute (BASt) was given the task of assessing the concept as a whole with regard to the active and passive safety and the exemption of the obligation to wear a helmet. The expertise concluded that the BMW two-wheeler concept has a very high safety standard. Some extracts of the expertise, in particular the investigations concerning the exemption of the obligation to wear a helmet are presented. Common legal requirements for the vehicle registration of vehicle concepts similar to the BMW two-wheeler in Germany have been formulated.
Despite the steadily declining number of pedestrian fatalities and injuries in most European countries during recent decades, pedestrian protection is still of great importance in the European Union as well as in Germany. This is because they still constitute a large proportion of road user casualties and are more likely to suffer serious and fatal injuries than most other road users. In 1999 only car occupants suffered more fatal injuries than pedestrians in Germany. In December 1998, EEVC WG 17 completed their review and updating of the EEVC WG 10 pedestrian test procedure that made it possible to evaluate the protection afforded to pedestrians by the front of passenger cars in an accident. Within the scope of this procedure, four different impactors are used representing those parts of the body which are injured very often and/or very seriously in vehicle-pedestrian-collisions. In a project executed by IKA and BASt, a small family car was tested according to the EEVC WG 17 test procedure. Afterwards modifications to the car were carried out in order to improve the pedestrian protection provided by the vehicle design. There were certain restrictions placed on the level of modifications undertaken, e.g. only minor modifications to vehicle styling and to the vehicle structures, which provide passenger protection. The redesigned vehicle was tested again using the WG 17 test procedure. The test results of the modified vehicle were compared with those of the standard vehicle and evaluated. The results show that considered measures for pedestrian protection in many areas of the vehicle front structure and the use of innovative techniques can lead to a significant reduction of the loads of pedestrians at an acceptable expense.
The 2BeSafe project (2-Wheeler Behaviour and Safety) is a collaborative project (co financed by the European Commission) that aims to study the naturalistic behaviour of Powered-Two-Wheeler (PTW) riders in normal and critical riding situations. That includes the interaction between PTW riders and other road users and possible conflicts between them. One of the predominant causes of accidents involving PTWs is that PTWs are often overlooked by other road users. One task of the project lead by BASt therefore deals with possible improvements in conspicuity and the development of recommendations. Particularly using the findings of the studies on conflict situations, promising lighting arrangements to enhance conspicuity of PTWs during the day and at night are selected. An abstract recognizing pattern for PTWs is defined, enabling other road users (e.g. car drivers) to clearly identify riders. Lamps and outfit like lighting configurations of different colours, different helmet lights, reflect / luminescent clothing parts and retro-reflective markings are designed and manufactured. Then, the different solutions are tested in a laboratory setting using experimental motorcycles together with riders to which the equipment is fitted. As result a proposal for a uniform signal pattern or lamp configuration in the front of all motorcycles and riders will be outlined. The contribution first gives a short overview of the topics of the research project that deal with conflicts and their connection with poor conspicuity and then presents in detail the methods used in the activities concerning solutions for the improvement of conspicuity together with first results.
Safety of light goods vehicles - findings from the German joint project of BASt, DEKRA, UDV and VDA
(2011)
Light goods vehicles (LGVs) are an important part of the vehicle fleet, providing a vital component in the European transportation system. On the other hand, LGVs are in the focus of public discussion regarding road safety. In order to analyse the accident situation of LGVs in an objective manner, Federal Highway Research Institute (BASt), VDA, DEKRA and German Insurers Accident Research (UDV) launched a joint project. The aim of this project, which will be finished by mid of 2011, is to identify reasonable measures which will further improve the safety of LGVs. For the first time, these partners jointly together conducted a research project and put together their know-how in accident research. Analyses are based on real-life accident data from the GIDAS database, the Accident Database of UDV (UDB), the DEKRA database and national statistics. The findings deliver answers to questions within the arena of future legislative actions and consumer protection activities. The analyses of databases cover areas of primary and secondary safety of LGVs with a special focus on advanced driver assistance systems (ADAS), driver behaviour as well as partner and occupant protection. Key figures from national statistics are used to highlight hotspots of accidents of LGVs in Germany. Finally, the proposed countermeasures are assessed regarding their potential effectiveness. Amongst others, the results show that the accident situation of LGVs is very similar to that of passenger cars. Noteworthy variations could be found in collisions with pedestrians, at reversing and regarding accident causes. Occupant safety of LGVs is on a higher level compared to cars. Results indicate that seatbelt use is on a significantly lower level compared to cars. This leads to higher-than-average injury risk for unbelted LGV occupants. When it comes to partner protection, there are problems with compatibility at LGVs. For car occupants there is a very high injury risk when colliding with a LGV. It indicates that higher passive safety test standards for LGVs would be counterproductive if they further increase stiffness of LGVs. The analysis of LGV-pedestrian accidents shows that pedestrian kinematic differs significantly from car-pedestrian accidents. At this point, existing pedestrian related test standards developed for cars cannot be adopted to LGVs. When it comes to active safety, ESC proved its effectiveness once again. Beyond that, rear view cameras, advanced emergency braking systems and lane departure warning systems show a safety potential, too. In addition to any technical countermeasures previously discussed, the importance of the driver behavior and attitude regarding the accident risk was investigated. In order to develop successful actions it is important to understand the main target population. In the case of LGV especially the crafts business and smaller companies are the major contributors the safety issue.
The project UR:BAN "Cognitive assistance (KA)" aims at developing future assistance systems providing improved performance in complex city traffic. New state-of-the-art panoramic sensor technologies now allow comprehensive monitoring and evaluation of the vehicle environment. In order to improve protection of vulnerable road users such as pedestrians and cyclists, a particular objective of UR:BAN is the evaluation and prediction of their behaviour and actions. The objective of subproject "WER" is development support by providing quantitative estimates of traffic collisions at the very start and predict potential in terms of optimized accident avoidance and reduction of injury severity. For this purpose an integrated computer simulation toolkit is being devised based on real world accidents (GIDAS as well as video documented accidents), allowing the prediction of potential effectiveness and future benefit of assistance systems in this accident scenario. Subsequently, this toolkit may be used for optimizing the design of implemented assistance systems for improved effectiveness.
Evaluation of the performance of competitive headforms as test tools for interior headform testing
(2009)
The European Research Project APROSYS has evaluated the interior headform test procedure developed by EEVC WG 13, representing the head contact in the car during a lateral impact. One important aspect within this test procedure was the selection of an appropriate impactor. The WG13 procedure currently uses the Free Motion Headform as used within the FMVSS 201. The ACEA 3.5 kg headform used in Phase 1 of the European Directive and the future European Regulation on Pedestrian Protection is still discussed as a possible alternative. This paper reports work performed by the Federal Highway Research Institute (BASt) as a part of the APROSYS Task 1.1.3. The study compares the two headform impactors according to FMVSS and ACEA, in a series of basic tests in order to evaluate their sensitivity towards different impact angles, impact accuracy, the effect of differences to impactors of the same type and the effects of the repeatability and reproducibility of the test results. The test surface consisted of a steel tube covered with PU foam and PVC, representing the car interior to be tested. Despite of the higher mass of the FMH the HIC values of this impactor were generally lower than those of the ACEA headform. The FMH showed a higher repeatability of test results but a high sensitivity on the angle of roll, the spherical ACEA impactor performed better with regards to the reproducibility. In case of the ACEA impactor-, the angle of roll had no influence.
Thoracic injuries are one of the main causes of fatally and severely injured casualties in car crashes. Advances in restraint system technology and airbags may be needed to address this problem; however, the crash test dummies available today for studying these injuries have limitations that prevent them from being able to demonstrate the benefits of such innovations. THORAX-FP7 was a collaborative medium scale project under the European Seventh Framework. It focused on the mitigation and prevention of thoracic injuries through an improved understanding of the thoracic injury mechanisms and the implementation of this understanding in an updated design for the thorax-shoulder complex of the THOR dummy. The updated dummy should enable the design and evaluation of advanced restraint systems for a wide variety (gender, age and size) of car occupants. The hardware development involved five steps: 1) Identification of the dominant thoracic injury types from field data, 2) Specification of biomechanical requirements, 3) Identification of injury parameters and necessary instrumentation, 4) Dummy hardware development and 5) Evaluation of the demonstrator dummy. The activities resulted in the definition of new biofidelity and instrumentation requirements for an updated thorax-shoulder complex. Prototype versions were realised and implemented in three THOR dummies for biomechanical evaluation testing. This paper documents the hardware developments and biomechanical evaluation testing carried out.