91 Fahrzeugkonstruktion
Filtern
Erscheinungsjahr
Dokumenttyp
- Konferenzveröffentlichung (164)
- Buch (Monographie) (111)
- Wissenschaftlicher Artikel (18)
- Arbeitspapier (13)
- Teil eines Buches (Kapitel) (8)
- Bericht (5)
Schlagworte
- Deutschland (138)
- Germany (138)
- Safety (124)
- Sicherheit (123)
- Conference (101)
- Konferenz (98)
- Fahrzeug (89)
- Vehicle (88)
- Research report (77)
- Forschungsbericht (75)
Jahresbericht 2006
(2007)
Der Jahresbericht der Bundesanstalt für Straßenwesen gibt einen Überblick über die Arbeitsschwerpunkte der BASt im Jahr 2006. Neben grundlegenden Informationen über die BASt werden 31 Projekte aus den fünf Forschungsabteilungen der BASt vorgestellt. Abgerundet wird der Jahresbericht mit den Aktivitäten der Öffentlichkeitsarbeit, der Internationalen Zusammenarbeit, einer Zusammenstellung der zum Teil in der BASt entwickelten und gepflegten Datenbanken und -sammlungen sowie Zahlen und Fakten des Jahres 2006.
The Traffic Accident Research Institute at University of Technology Dresden investigates about 1,000 accidents annually in the area around and in Dresden. These datasets have been summarized and evaluated in the GIDAS (German Accident In-Depth Study) project for 13 years. During the project it became apparent that the specific traffic situation of a covert exit of a passenger car and an intersecting two-wheeler involves a high risk potential. This critical situation develops in a large part due to the lack of visibility between the driver and the intersecting bike. In this paper the accident avoidance potential of front camera systems with lateral field of view, which allows the driver to have an indirect sight into the crossing street area will be presented.
Die schnell fortschreitende Entwicklung der Sensortechnologie und der Aktuatorik bietet Ansätze für neuartige Rückhaltesysteme und kann somit den Schutz des Insassen bei Unfällen erheblich verbessern. Kommende Generationen adaptiver Rückhaltesysteme werden eine dosierte Aktivierung der Schutzwirkung (z.B. mehrstufige Airbags oder Gurtstraffer) abhängig von der Unfallschwere und der Fahrzeugbesetzung erlauben. Um solche Systeme voll auszunutzen, werden Sensoren entwickelt, die die Schwere eines Unfalls in weitaus höherer Auflösung als bisher erkennen können und somit das Einleiten adaptiver Maßnahmen ermöglichen. Diese Systeme werden unter dem Begriff der intelligenten oder adaptiven Rückhaltesysteme zusammengefasst. Ziel des Projektes "Intelligente Rückhaltesysteme" ist es, die möglichen Verbesserungen der passiven Sicherheit durch die neuen Technologien zu analysieren und darzustellen. Außerdem sind die Auswirkungen auf die gesetzlichen Regelungen zu untersuchen, um so mögliche zusätzliche Schutzpotentiale schnell umzusetzen und eventuelle Risiken zu vermeiden. In einer umfangreichen Literaturrecherche wurde zum einen das Unfallgeschehen analysiert. Ergänzend wurden die Schwerpunkte des Pkw-Unfallgeschehens durch eine Auswertung von Unfalldaten der GIDAS untersucht und dargestellt. Zum anderen wurde der Stand der Technik heutiger und zukünftiger Rückhaltesysteme aufgearbeitet und systematisiert. Dabei wurden die bestehenden und zukünftigen Systeme in ihrer Funktionsweise analysiert und durch ein 3-Ebenen-Modell charakterisiert. Mit Hilfe des Abgleichs der Schwerpunkte des realen Unfallgeschehens mit den RHS und der bestehenden Gesetzgebung wurden Potenziale und Wirkbereiche möglicher Maßnahmen skizziert. Auf der Basis einer Expertenbefragung konnten der Entwicklungsstand der iRHS aufgezeigt und Vorschläge zur Erweiterung der bestehenden Sicherheitsgesetzgebung gemacht werden.
Injury probability functions for pedestrians and bicyclists based on real-world accident data
(2017)
The paper is focusing on the modelling of injury severity probabilities, often called as Injury Risk Functions (IRF). These are mathematical functions describing the probability for a defined population and for possible explanatory factors (variables) to sustain a certain injury severity. Injury risk functions are becoming more and more important as basis for the assessment of automotive safety systems. They contribute to the understanding of injury mechanisms, (prospective) evaluation of safety systems and definition of protection criteria or are used within regulation and/or consumer ratings. In all cases, knowledge about the correlation between mechanical behavior and injury severity is needed. IRFs are often based on biomechanical data. This paper is focusing on the derivation of injury probability models from real world accident data of the GIDAS database (German In-depth Accident Study). In contrast to most academic terms there is no explicit term definition or definition of creation processes existing for injury probability models based on empirical data. Different approaches are existing for such kind of models in the field of accident research. There is a need for harmonization in terms of the used methods and data as well as the handling with the existing challenges. These are preparation of the dataset, model assumptions, censored/unknown data, evaluation of model accuracy, definition of dependent and independent variable, and others. In the presented study, several empirical, statistical and phenomenological approaches were analyzed regarding their advantages and disadvantages and also their applicability. Furthermore, the identification of appropriate prediction parameters for the injury severity of pedestrians has been considered. Due to its main effect on injuries of pedestrians and bicyclists, the importance of the secondary impact has also been analyzed. Finally, the model accuracy, evaluated by several criteria, is the rating factor that gives the quality and reliability for application of the resulting models. After the investigation and evaluation of statistical approaches one method was chosen and appropriate prediction variables were examined. Finally, all findings were summarized and injury risk functions for pedestrians in real world accidents were created. Additionally, the paper gives instructions for the interpretation and usage of such functions. The presented results include IRFs for several injury severity levels and age groups. The presented models are based on a high amount of real world accidents and describe very well the injury severity probability of pedestrians and bicyclists in frontal collisions with current vehicles. The functions can serve as basis for the evaluation of effectiveness of systems like Pedestrian-AEB or Bicycle-AEB.
This study aimed at developing an injury estimation algorithm for AACN technologies for Germany and compared them to findings based on Japanese data. The data to build and to verify the algorithm was obtained from the German in-depth Accident Database (GIDAS) and split into a training and a validation dataset. Significant input variables and the generalized linear regression model to predict severe injuries (ISS>15) were selected to maximize area under the receiver operating characteristic curve (AUC). Probit regression with the input parameter multiple impact, delta v, seatbelt use and impact direction gave the largest AUC of 0.91. Sensitivity of the algorithm was validated at 90% and specificity at 76% for an injury risk threshold of 2%. It appears that no major differences between Japan and Germany exist for injury estimation based on delta v and impact direction. However, far side impact and multiple crash events appear to be associated with a larger risk increase in the German data.
Es wird über das Ende 2002 abgeschlossene EU-Projekt ADVISORS berichtet. Ziel dieses Projektes, an dem sich 16 Organisationen aus 10 europäischen Ländern beteiligten, war es, die Entwicklung, Testung und Implementierung von Fahrerassistenzsystemen (FAS) zu unterstützen. Es wurde eine umfassende Methodik zur Bewertung von FAS entwickelt und auf dieser Basis wurden eine Reihe von Evaluationsstudien zu ausgewählten FAS durchgeführt. Des Weiteren wurden Implementierungsstrategien für bestimmte FAS entwickelt und mit Experten verschiedener Länder diskutiert.
In Form einer Pilotstudie wurden eine Literaturrecherche, eine Befragung von Experten der Automobilindustrie und theoretische Untersuchungen zur Frage der Head-Up-Display-Technik (HUD) im Kraftfahrzeug durchgeführt. Auf der Suche nach neuen, die Sicherheit des Kraftfahrzeugverkehrs fördernden Anzeigen findet das HUD zunehmend Interesse. Das Prinzip des HUD im Kraftfahrzeug besteht darin, dass die Informationen des Displays über den in die Windschutzscheibe integrierten Combiner in die Verkehrsszene als virtuelles Bild eingeblendet werden. In Europa wurden von Automobil- und Zulieferfirmen ca. ein Dutzend HUD-Systeme als Experimentalsysteme entwickelt. In den europäischen Forschungsprogrammen PROMETHEUS und DRIVE wird das HUD als eine von mehreren neuen Anzeigetechniken untersucht. In den USA und Japan befinden sich HUD-Systeme in Serienfahrzeugen bereits seit einigen Jahren auf dem Markt. Informationen auf einem HUD im Kraftfahrzeug werden schneller und sicherer abgelesen, als auf der konventionellen Instrumententafel. Insbesondere die physiologischen Anteile des Wahrnehmungsvorganges, das heißt die Augenbewegung, das Akkommodieren und das Adaptieren, erfolgen mit einem HUD schneller. Allerdings kann die Verquickung der Verkehrsszene mit bordeigenen Informationen zu verändertem Fahrverhalten und zu anderen Beobachtungsstrategien der Kraftfahrer führen. Die HUD-Technik ist zwar relativ fortgeschritten, jedoch liegen nur wenige fundierte experimentelle Ergebnisse vor. Es wurde daher eine Untersuchungsreihe mit Labor-, Simulator- und Feldexperimenten entworfen, die offene Fragen zu Nutzen, Informationsinhalten und Gestaltung von HUD-Anzeigen beantworten sollen. Gesetzliche Vorschriften der StVZO und die sie tangierenden EG-Richtlinien beziehungsweise ECE-Regelungen legen die Mindestanforderungen an die Sicht aus Kraftfahrzeugen fest, und es bestehen Vorgaben sowohl für die mögliche Position der HUD-Anzeigen, als auch für die Transmission und für die Farberkennung der Verkehrsobjekte.
The objective of this deliverable is to describe the expected influence of the candidate test procedures developed in FIMCAR for frontal impact on other impact types. The other impact types of primary interest are front-to-side impacts, collisions with road restraint systems (e.g. guardrails), and heavy goods vehicle impacts. These collision types were chosen as they involve structures that can be adapted to improve safety. Collisions with vulnerable road users (VRU) were not explicitly investigated in FIMCAR. It is expected that the vehicle structures of interest in FIMCAR can be designed into a VRU friendly shell. Information used for this deliverable comes from simulations and car-to-car crash tests conducted in FIMCAR or review of previous research. Three test configurations (full width, offset, and moving deformable barriers) were the input to the FIMCAR selection process. There are three different types of offset tests and two different full width tests. During the project test procedures could be divided into three groups that provide different influences or outcomes on vehicle designs: 1. The ODB barrier provides a method to assess part of the vehicles energy absorption capabilities and compartment test in one test. 2. The FWRB and FWDB have similar capabilities to control structural alignment, further assess energy absorption capabilities, and promote the improvements in the occupant restraint system for high deceleration impacts. 3. The PDB and MPDB can be used to promote better load spreading in the vehicle structures, in addition to assessing energy absorption and occupant compartment strength in an offset configuration. The consortium selected the ODB and FWDB as the two best candidates for short term application in international rulemaking. The review of how all candidates would affect vehicle performance in other impacts (beside front-to-front vehicle or frontal impacts with fixed obstacles) however is reported in this deliverable to support the benefit analysis reported in FIMCAR. The grouping presented above is used to discuss all five test candidates using similarities between certain tests and thereby simplify the discussion.
Institute for Traffic Accident Research and Data Analysis <Tokyo>rnAbstract: Analyses were conducted to clarify the features of rear-end collisions, using an integrated accident database developed by the Institute for Traffic Accident Research and Data Analysis (ITARDA). Focusing on neck injuries in rear-end collisions, analyses were made of the relation to struck-vehicle properties. Regarding the relation to the initial year of registration, the results did not show that newer vehicles tended to have a lower no-neck-injury rate, which was defined in this study as an index. On the contrary, in some passenger car classes, it was observed that the no-neck-injury rate was higher in newer vehicles. The effect of an active head restraint system, which is one type of anti-whiplash device, was analyzed by using not only the no-neck-injury rate but also a regression analysis. The results showed that the effect of an active head restraint system on suppressing the incidence of neck injuries was statistically significant.rn
The share of high-tensile steel in car bodies has increased over the last years. While occupant safety has generally benefited from this measure, there is a potential risk that, as a result, rescue time may increase considerably. In more than 60% of all car occupant fatalities a technical rescue has been necessary. These are in particular those cases where occupants die immediately at the accident scene. Therefore, in these cases "rescue time" is a very sensitive parameter. In addition to the general analysis of the need of technical rescue and the actual rescue time depending on model years, the injury pattern of occupants requiring technical rescue will be analysed to provide advice for rescue teams. Furthermore, a detailed analysis of rescue measures for the most popular car models depending on the safety cell design is given.
This work describes the results of the experimental activity, illustrating the driving behavior observed in different conditions, relating them to the different methods of ADAS intervention and comparing the driver behavior without ADAS. In the present study, driver behavior was studied in road accidents involving elderly pedestrians, with different ADAS HMIs, as a base to develop a driver model in near missing pedestrian accidents. A literature research was conducted with the aim of finding out the main influencing factors, including environment, boundary conditions, configuration of impact, pedestrian and driver information, when pedestrian fatalities occur and an analysis of frequent road accidents was conducted to get more detailed information about the driver- behavior. In order to obtain more detailed information about pedestrian accidents, real road accidents were reconstructed with multibody simulations on PC-Crash and, by the comparison between literature findings and reconstructions, a generic accident scenario was defined. The generic accident scenario was implemented on the full scale dynamic driving simulator in use at the Laboratory for Safety and Traffic Accident Analysis (LaSIS, University of Florence, Italy) in order to analyse the driving behaviors of volunteers, also considering the influence of ADAS devices. Forty-five young volunteers were enrolled for this study, resulting in forty valid tests on different testing scenarios. Two different scenarios consisted in driving with or without ADAS in the vehicle. Different kinds of ADAS, acoustic and optical, with different time of intervention were tested in order to study the different reactions of the driver. The tests showed some interesting differences between driver's behavior when approaching the critical situation. Drivers with ADAS reacted earlier, but more slowly, depending also on the type of alarm, and often with double reaction when braking. In fact, the results of the activity showed that with ADAS intervention the time to collision (TTC) increases, but the reaction time and braking modality change: a) there is a sort of "latency" time between the accelerator pedal release and the brake pressure; b) the brake pressure is initially less intense. So the driver only partially takes advance from the TTC increase. These differences were valued not only qualitatively, but quantitatively as well. This work revealed to be useful to improve the knowledge of drivers" behavior, in order to realize a driver model that can be implemented to help attaining and assessing higher levels of automation through new technology.
It has been pointed that most of the accidents on the roads are caused by driver faults, inattention and low performance. Therefore, future active safety systems are required to be aware of the driver status to be able to have preventative features. This probe study gives a system structure depending on multi-channel signal processing for three modules: Driver Identification, Route Recognition and Distraction Detection. The novelty lies in personalizing the route recognition and distraction detection systems according to particular driver with the help of driver identification system. The driver ID system also uses multiple modalities to verify the identity of the driver; therefore it can be applied to future smart cars working as car-keys. All the modules are tested using a separate data batch from the training sets using eight drivers" multi-channel driving signals, video and audio. The system was able to identify the driver with 100% accuracy using speech signals of length 30 sec or more and a frontal face image. After identifying the driver, the maneuver/ route recognition was achieved with 100% accuracy and the distraction detection had 72% accuracy in worst case. In overall, system is able to identify the driver, recognize the maneuver being performed at a particular time and able to detect driver distraction with reasonable accuracy.
This work aimed for getting the main features of accidents involving Light Goods Vehicles (LGV), using accident cases collected in the In-Depth Accidents Studies built up at IFSTTAR-LMA (France), in order to analyse thoroughly the proceedings of these accidents and identify the major factors for the different types of LGV. This work was based on the analysis of 88 accident cases involving LGV with a Maximum Authorised Mass inferior to 3.5 tonnes. In particular kinematics reconstruction of these accidents were performed to calculate the average impact speeds and to better understand the compatibility problems between LGV and antagonist vehicles. Specific features have been reviewed to pick up problems concerning safety, maintenance, loading, LGV design: general conditions of the accident, vehicle features, and passive safety. The main results of this study are presented in this paper.
Bus or heavy vehicle passenger accidents are rare events, compared with car accidents, but sometimes leads to a large number of victims especially in rollover crash scenarios. Two accidents occurred in Portugal in 2007 and 2013 in which 28 people died and more than 50 are injured, shown the importance of the investigation of such accidents. For the investigation of these accidents multidisciplinary teams are constituted with engineers and police officers. All the factors involved are taken into consideration including road design, traffic signs, maintenance and hardware, human factors, and vehicle factors. In this work a methodology to an accurate collection of the data is proposed. From the information collected the accident is reconstructed using the PC-CrashTM software. From this all the contribution factors are determined and recommendations to mitigate these crashes are listed. These two accidents are rollover accidents and the analysis of the injuries and its correlation with the use of retention systems is very important. From the medical data and with the dynamics of the accident determined simulations of the occupants with biomechanical models are carried out in order to evaluate the effect of the retention systems in the injuries. This analysis is based on injury criteria (such as Abbreviated Injury Score (AIS) or Injury Severity Scale (ISS)). With this it is possible to determine if the seat belt was worn or not.
In-depth road traffic accident research in Spain is a fairly recent activity. In the past, only accident data that had been retrospectively processed by the national and regional traffic police forces was available. In 1999 Applus+IDIADA set up a permanent accident research unit to carry out indepth analysis of road accidents in Spain. Since then accidents involving cars, motorcycles, coaches and vulnerable road users have been thoroughly studied. The Applus+IDIADA accident research team has carried out work for the various traffic polices in Spain and it is currently involved in several research projects in which accidentology is one of the main tasks. The working methodology of the team is presented in the first part of the paper. In the framework of the European research project "Rollover" (GRD2-2001-50086), Applus+IDIADA has collected data, inspected scenarios and performed virtual reconstructions of twenty-six of the total seventy-six rollover accidents studied. The second half of the paper describes how these accident investigations were used to develop a test procedure for identifying possible improvements to the vehicle structure which augment occupant protection in a rollover scenario. In particular, a proposal for a new drop test for rollover assessment is presented. The cases were analysed for severity, in terms of injury to the occupants and damage to the vehicle, and taking into account whether a seatbelt was worn or not. The worst possible cases were identified as those that had severe occupant injuries and sizable damage to the occupant compartment when seatbelts had been worn. The most severe cases were then analysed further for impact position (roll and pitch angles) and the impact velocity. With these parameters taken into account, the most representative combinations could be found. This resulted in a series of configurations for possible drop tests. The results of the tests indicate where passenger vehicle structures need to be improved in order to increase occupant safety in the event of a rollover crash.
Despite the steadily declining number of pedestrian fatalities and injuries in most European countries during recent decades, pedestrian protection is still of great importance in the European Union as well as in Germany. This is because they still constitute a large proportion of road user casualties and are more likely to suffer serious and fatal injuries than most other road users. In 1999 only car occupants suffered more fatal injuries than pedestrians in Germany. In December 1998, EEVC WG 17 completed their review and updating of the EEVC WG 10 pedestrian test procedure that made it possible to evaluate the protection afforded to pedestrians by the front of passenger cars in an accident. Within the scope of this procedure, four different impactors are used representing those parts of the body which are injured very often and/or very seriously in vehicle-pedestrian-collisions. In a project executed by IKA and BASt, a small family car was tested according to the EEVC WG 17 test procedure. Afterwards modifications to the car were carried out in order to improve the pedestrian protection provided by the vehicle design. There were certain restrictions placed on the level of modifications undertaken, e.g. only minor modifications to vehicle styling and to the vehicle structures, which provide passenger protection. The redesigned vehicle was tested again using the WG 17 test procedure. The test results of the modified vehicle were compared with those of the standard vehicle and evaluated. The results show that considered measures for pedestrian protection in many areas of the vehicle front structure and the use of innovative techniques can lead to a significant reduction of the loads of pedestrians at an acceptable expense.
This paper provides an overview of the research work of the European Enhanced Vehicle-safety Committee (EEVC) in the field of crash compatibility between passenger cars. Since July 1997 the EC Commission is partly funding the research work of EEVC. The running period of this project will be two years. The progress of five working packages of this research project is presented: Literature review, Accident analysis, Structural survey of cars, Crash testing, and Mathematical modelling. According to the planned time schedule the progress of research work is different for the five working packages.
Recent accident statistics from the German national database state bicyclists being the second endangered group of vulnerable road users besides pedestrians. With 399 fatalities, more than 14.000 seriously injured and more than 61.000 slightly injured persons on german roads in the year 2011, the group of bicyclists is ranked second of all road user groups (Statistisches Bundesamt, 2012). While the overall bicycle helmet usage frequency in Germany is very low, evidence is given that its usage leads to a significant reduction of severe head injuries. After an estimation of the benefit of bicycle helmet usage as well as an appropriate test procedure for bicyclists, this paper describes two different approaches for the improvement of bicyclist safety. While the first one is focusing on the assessment of the vehicle based protection potential for bicyclists, the second one is concentrating on the safety assessment of bicycle helmets. Within the first part of the study the possible revision of the existing pedestrian testing protocols is being examined, using in depth accident data, full scale simulation and hardware testing. Within the second part of the study, the results of tests according to supplemental test procedures for the safety assessment of bicycle helmets developed by the German Federal Highway Research Institute (BASt) are presented. An additional full scale test performed at reduced impact speed proves that measures of active vehicle safety as e.g. braking before the collision event do not necessarily always lead to a reduction of injury severity.
A flexible pedestrian legform impactor (FlexPLI) has been evaluated by a Technical Evaluation Group (Flex-TEG) of the Working Party on Passive Safety (GRSP) of the United Nations Economic Commission for Europe (UN-ECE). It will be implemented within phase 2 of the global technical regulation (GTR 9) as well as within a new ECE regulation on pedestrian safety as a test tool for the assessment of lower extremity injuries in lateral vehicle-to-pedestrian accidents (UN-ECE 2010-1, 2010-2 and 2010-3). Due to its biofidelic properties in the knee and tibia section, the FlexPLI is found to having an improved knee and tibia injury assessment ability when being compared to the current legislative test tool, the lower legform impactor developed by the Pedestrian Safety Working Group of the European Enhanced Vehicle-safety Committee (EEVC WG 17). However, due to a lack of biofidelity in terms of kinematics and loadings in the femur part of the FlexPLI, an appropriate assessment of femur injuries is still outstanding. The study described in this paper is aimed to close this gap. Impactor tests with the FlexPLI at different impact heights on three vehicle frontends with Sedan, SUV and FFV shape are performed and compared to tests with a modified FlexPLI with upper body mass. Full scale validation tests using a modified crash test dummy with attached FlexPLI that are carried out for the first time prove the more humanlike responses of the femur section with applied upper body mass. Apart from that they also show that the impact conditions described in the current technical provisions for tests with the FlexPLI don"t necessarily compensate the missing torso mass in terms of knee and tibia loadings either. Therefore it can be concluded that an applied upper body mass will contribute to a more biofidelic overall behavior of the legform and subsequently an improved injury assessment ability of all lower extremity injuries addressed by the FlexPLI. Nevertheless, the validity of the original as well as the modified legform for tests against vehicles with extraordinary high bumpers as well as flat front vehicles still needs to be evaluated in detail. A first clue is given by the application of an additional accelerometer to the legform.
The objective of this study was to identify aspects of the individual experience and behaviour of drivers in intersection accidents. A total of 40 accident drivers sketched their ideas and expectations relating to intersection assistance using the method of Structure Formation Technique. Using this method prepared content cards and relation cards for a subject matter are formed together in a structure through the application of an explicit set of rules. The structures generated in this process were compared with the structures of 20 control persons who have not recently experienced an accident at intersections. The basis for this comparison was a case-control design with matched samples regarding the variables age, sex, education, occupation, driving experience and annual mileage. The results of the accident reports indicate that additional assistance is instrumental in the perception of other road users. Generally the interviewed drivers were open-minded towards the use of intersection assistance systems. Drivers who have recently experienced an accident at intersections significantly more often approved of warning assistance in their vehicle than drivers who have not recently experienced an accident. Further accident experienced drivers favoured warning and information via audio warning more frequently. The ideas of the drivers were strongly shaped by the experiences with already available advanced driver assistance systems. Hence acoustic and visual warnings were generally preferred to tactile warnings. The findings also indicate a relationship between the variable age and the acceptance of automatic vehicle intervention, and the suggestion of a head up display as a configuration of a visual warning system.
The market introduction and penetration of electric vehicles can be seen as a milestone in order to reduce the environmental burden imposed by the transport sector. The wide-spread use of electric vehicles powered by electricity from renewable sources promises a substantial reduction of local emissions in urban areas as well as greenhouse gas emissions. To be a successful mobility alternative several obstacles and challenges have to be overcome first. Especially the customers' purchase decision determines finally whether an innovation like electromobility will be successful. Therefore, this paper concentrates on demand-related obstacles and barriers for a broad market deployment of electric cars. Within the Electromobility+ project eMAP these issues are investigated via a consumer survey. It was designed to identify the awareness of potential consumers of electric cars as well as give an estimate of the attitude towards this new technology. In addition to the picture of potential demand-related obstacles the consumers were asked to evaluate the suitability of various promotion measures.
The misuse of CRS (child restraint system) is one of the most urgent problems in connection of child safety in cars. Numerous field studies show that more than two thirds of all CRS are used in a wrong way. This misuse could lead to serious injuries for the children. Surprisingly the quality of CRS use is coded much better in accident data (e.g. GIDAS) than the results of observatory field studies show. It is expected that misuse of CRS was not detected by the accident teams in a large number of the cases. An essential part in improving child seats and their usability is the knowledge of the relation between misuse and resulting injuries. For that the analysis and experimental reconstruction of accidents is an important part. For allowing an exact experimental accident reconstruction, it is necessary to have detailed information about the securing situation of the child and about the installation of the CRS in the car.
Rollovers continue to be a major source of heavy truck fatalities when compared to other accident modes. Real world rollover accidents are analyzed and two distinct damage patterns are identified. Damage to heavy truck roofs can occur from lateral loading that transitions to vertical roof loading as the vehicle rolls onto its side and then over onto its roof. A second load path can occur when the vehicle has rolled onto its side and furrows into the ground generating large longitudinal friction forces between the roof and ground. A review of the previous literature and various test methodologies are presented. A sled impact test methodology is presented which allows for structural assessment of a heavy truck cab's crashworthiness in both of these loading environments. Two test series are presented using the sled impact test methodology in order to analyze real world truck rollovers using varying impact platen and contact angles. The structural deformation and failure patterns were found to be consistent with damage seen in real world accident vehicles. In each case, a second equivalent truck cab was then reinforced and tested under similar conditions to evaluate the energy management and crush resistance of a stronger cab structure. These structural reinforcements demonstrated a substantial reduction in roof crush and protected the survival space of the occupant compartment. The sled impact test procedure is an effective method for testing the structural performance of a heavy truck cab in a variety of loading scenarios comparable to real world accidents and ascertaining the load and energy load levels in these accident modes.
Das Handbuch "Barrierefreiheit im Fernbuslinienverkehr" soll helfen, die Attraktivität und den Komfort für alle Reisenden in Fernbussen, mit und ohne Mobilitätseinschränkungen, weiter zu stärken. Im Handbuch werden gesetzlich vorgeschriebene Maßnahmen zur Barrierefreiheit in Fernbussen erläutert sowie weitergehende (optionale) Maßnahmen aufgezeigt. Bei der Erstellung des Handbuchs wirkte die BASt im Projektbetreuerkreis mit und stellte die Fachbetreuer.
Haftung bei kooperativen Verkehrs- und Fahrerassistenzsystemen : Forschungsprojekt FE 89.0251/2010
(2012)
Die Untersuchung zum Forschungsprojekt FE 89.0251/2010 "Haftung bei kooperativen Verkehrs- und Fahrerassistenzsystemen" beschäftigt sich mit der rechtlichen Analyse verschiedener haftungsrechtlich relevanter Szenarien im Straßenverkehr, bei denen Verkehrs- und Fahrerassistenzsysteme bereits eingebunden sind, oder aber eine Einbindung in naher Zukunft zu erwarten ist. Berücksichtigt sind nur Informations- und Warnsysteme. Als relevante Szenarien werden die lokale Gefahrenwarnung und die optimale Verkehrsflusssteuerung für Lichtsignalanlagen identifiziert. Bei der lokalen Gefahrenwarnung ist zu unterschieden, ob sicherheitsrelevante Informationen von den beteiligten Verkehrs- bzw. Fahrerassistenzsystemen nur weitergeleitet oder auch bearbeitet und ausgewertet werden. Die untersuchten Fälle berücksichtigen verschiedene Fehlerquellen und unterscheiden danach, ob die involvierte Infrastruktur von öffentlicher Hand oder von einem privaten Unternehmen betrieben wird. Ergebnisse des Forschungsprojektes sind: a) Haftungsrechtliche Anspruchsgrundlagen ergeben sich aus dem allgemeinen Deliktsrecht (-§ 823 BGB), der Produkt- und Produzentenhaftung (ProdHaftG bzw. -§ 823 BGB), dem Straßenverkehrsrecht (-§-§ 7, 18 StVG), sowie der Amtshaftung (-§ 839 BGB i.V.m. Art. 34 GG). b) Informatorische oder warnende kooperative Verkehrs- und Fahrerassistenzsysteme dienen alleine einer zusätzlichen Unterstützung des Fahrers und können diesen nicht von der Pflicht befreien, die im Verkehr gebotene Sorgfalt zu beachten. c) Die Hersteller von kooperativen Verkehrs- und Fahrerassistenzsystemen müssen wie bei jedem anderen Produkt auch die berechtigten Sicherheitserwartungen der Käufer erfüllen. d) Die öffentliche Hand kommt durch das Betreiben der genannten Systeme ihrer Straßenverkehrssicherungspflicht nach. Nur wenn sie diese nicht mit der nötigen Sorgfalt erfüllt, kommt eine Haftung in Betracht. e) Durch die Verwendung von informatorischen oder warnenden kooperativen Verkehrs- und Fahrerassistenzsystemen ist keine grundsätzliche Haftungsverschiebung festzustellen. Weitere Empfehlungen: Informatorische oder warnende kooperative Verkehrs- und Fahrerassistenzsysteme können ohne zusätzliches systemspezifisches Haftungsrisiko in den Straßenverkehr eingeführt werden.
Zu den gefährlichsten Situationen im Straßenverkehr gehört der Konflikt zwischen einem Lkw und einem ungeschützten Verkehrsteilnehmer UVT (Radfahrer und Fußgänger). In Deutschland ereignen sich jährlich schätzungsweise 135 Unfälle mit Personenschaden, an denen nach rechts abbiegende Lkw (>3,5 t) und UVT beteiligt sind. Die UVT geraten dabei oft unter den Lkw und werden dann von einer der Achsen überrollt. Aus der Unfallanalyse ergab sich, dass der Erstkontakt häufig (57%) im Bereich der rechten vorderen Lkw-Ecke erfolgt. Die Hälfte der UVT gerieten noch vor oder im unmittelbaren Bereich des rechten Vorderrads unter den Lkw. Baustellen- und Kommunalfahrzeuge waren mit 46% häufig an den Unfällen beteiligt. Das direkte und das indirekte Sichtfeld sind zentrale Einflussgrößen für die Situation des rechts abbiegenden Lkw. Besonders die unzureichende Sicht nach vorn und nach rechts bereitet den Lkw-Fahrern erhebliche Probleme. An der Verbesserung der Information über die Verkehrssituation für den Lkw-Fahrer wird vielfach gearbeitet. Einzelne Lösungsansätze basieren auf dem Einsatz zusätzlicher Spiegel. Andere Lösungen modifizieren die bislang übliche Spiegelzahl in Form und Anbringung. Das Versuchsprogramm umfasste neben der Nachbildung der besonders häufigen und kritischen Situationen der rechts abbiegenden Lkw mit UVT-Dummies auch statische Untersuchungen des Sichtfeldes. Neben einem Lkw mit Standardspiegeln kam dabei ein Forschungsträger mit einem durch die Frontscheibe einsehbaren Spiegelsystem zum Einsatz. Das Projekt setzte sich auch mit der Wirkung des Seitenschutzes auseinander. Die bislang als Bauvorschrift wirkende Richtlinie 89/297/EWG sollte zukünftig zu einer Wirkvorschrift unter Einbeziehung des Pkw - Anpralls geändert werden. Das im Rahmen des Projektes erstellte Sicherheitskonzept beinhaltet Maßnahmen zur Reduzierung des Gefahrenpotenzials für UVT durch rechts abbiegende Lkw. Dazu gehören unter anderem abgesenkte Unterkanten der Front- und Seitenscheiben und zusätzliche Kamera-Monitor-Systeme. Das neuartige Spiegelsystem des MIM-Fahrzeugs von DC verbessert die indirekte Sicht für den Lkw-Fahrer deutlich und reduziert damit die Unfallgefahr. Die in der Entwicklung befindlichen Abbiegeassistenten zeigen die zukünftige Richtung für elektronische Fahrerunterstützung (MAN Demonstrator) auf. Ein beim Rechtsabbiegen aktivierter akustischer Signalgeber am Lkw wäre zur Information der UVT hilfreich. Eine weitere Option besteht in der Nutzung der seitlichen Markierungsleuchten des Lkws als zusätzliche Fahrtrichtungsanzeiger beim Abbiegen. Fahrbahn-Knotenpunkte können noch sicherer gestaltet werden. An ampelgeregelten Knotenpunkten würde eine vollständige Phasentrennung des Grünlichts oder ein Phasenverzug (früheres Grünlicht für UVT) Unfälle zwischen Lkw und UVT vermeiden. Weiterhin wirken sich eine versetzte Anordnung der Haltelinien und ein Verschwenken der Radfahrwege und Gehwege weg vom Knotenmittelpunkt positiv aus. Der Gesetzgeber sollte -§ 5 (8) StVO ändern, der des Radfahrern und Mofafahrern erlaubt, stehende Kraftfahrzeuge rechts zu überholen. 10% der untersuchten Abbiegeunfälle sind in dieser Situation passiert. Aufklärungsarbeit bezüglich der Sichtprobleme am Lkw sowie über das Bewegungsverhalten beim Rechtsabbiegen ist dringend erforderlich. Es ist auch zu überlegen, ob Aktivitäten von Herstellern beziehungsweise Unternehmern anerkannt werden, die mehr tun als die gesetzlichen Vorschriften verlangen, zu einer Lockerung vorhandener Restriktionen führen können. Es gibt in innerstädtischen Bereichen für einige Fußgängerzonen vorgesehene Zeitfenster zur Anlieferung von Gütern. Solche Zeitfenster könnten für mit anerkannten zusätzlichen Sicherheitseinrichtungen ausgerüstete Lkw ausgedehnt werden. Schwere Lkw aus bestimmten innerörtlichen Bereichen möglichst herauszuhalten, um UVT zu schützen, ist nicht praktikabel. Selbst wenn es gelänge, für die Belieferung mit Post und Waren akzeptable Alternativen zu bieten, bliebe nach wie vor der Baustellenverkehr und die kommunale Entsorgung. An 46% der untersuchten Unfälle waren derartige Lkw beteiligt.
Der Anteil von Geländefahrzeugen an der Gesamtzahl von Personenkraftwagen betrug im Juli 1991 in den alten Bundesländern ca. 1,1 Prozent. Nach eigenen Erhebungen sind etwa 62 Prozent der Geländefahrzeuge mit einem Frontschutzbügel ausgestattet. Der Bundesminister für Verkehr hat die BASt beauftragt zu prüfen, ob solche Konstruktionen einen Einfluss auf die Verletzungen bei Kollisionen mit Fußgängern und Zweiradbenutzern haben. Dazu wurde das Datenmaterial der Unfallerhebung der Medizinischen Hochschule Hannover ausgewertet und die um fahrzeugtechnische Angaben ergänzten Unfalldaten aus Nordrhein-Westfalen betrachtet. Weiterhin wird von Komponententests berichtet, die den Anprall menschlicher Körperteile an das Fahrzeug simulieren. Mit den Ergebnissen dieser Untersuchung wurde ein Frontschutzbügel hergestellt, der weniger aggressiv gegenüber ungeschützten Verkehrsteilnehmern ist. Zur Quantifizierung der Gefährdung von Fußgängern wurden zwei gängige Geländefahrzeugtypen mit und ohne Frontschutzbügel gemäß dem Prüfvorschlag der EEVC-WG 10 zur Bestimmung der Fußgängerverträglichkeit von Pkw-Frontflächen getestet. Die Ergebnisse aus den Versuchsreihen wurden mit Ergebnissen aus Versuchen an normalen Pkw verglichen.Es kann festgestellt werden, dass bei einem Unfall mit Kopfanprall eines Kindes an ein mit Frontschutzbügel ausgestattetes Geländefahrzeug bei 20 km/h mit gleichen Kopfbelastungen zu rechnen ist, wie bei einem Unfall mit 30 km/h mit einem Geländefahrzeug ohne Frontschutzbügel, beziehungsweise mit 40 km/h mit einem normalen Pkw. Für den Hüftanprall eines Erwachsenen an die Haubenkante ist bei einer Fahrzeuggeschwindigkeit von 25 km/h bei einem Fahrzeug mit Frontschutzbügel mit gleichen Belastungen zu rechnen, wie bei einem Unfall mit einem Fahrzeug ohne Frontschutzbügel bei 40 km/h (Pkw oder Geländewagen). Für die Belastungen des Knies eines Erwachsenen lässt sich keine Verschlechterung durch montierte Frontschutzbügel ableiten.
The "Autonomous driving on the roads of the future: Villa Ladenburg Project" by the Daimler und Benz-Stiftung looks at degrees of automation that will only become technically feasible in the distant future. The treatment of the legal questions in the present chapter therefore draws heavily on the description of the use cases, which begin to provide a concrete basis for evaluating individual issues. Uncertainties in predicting future technical developments can be expected and will have a commensurate impact on the assumptions and conclusions of this chapter. The resulting uncertainty is nevertheless unavoidable if one wants to press ahead with important interrelated issues. This chapter is therefore intended as a contribution to the debate on societal aspects of automated driving from a legal perspective and not as a legalistic evaluation of the subject. The consideration will largely focus on the situation within the context of current German law. The legal views expressed are those of the author and are based on nine years of experience in the field of driver assistance system research. In terms of the underlying conception presented here, the societal dimension of autonomous vehicles addressed in the present project goes well beyond the adjustments to the legal framework currently being called for in Germany. The following will examine the question of "societal acceptance" in the context of the legal questions raised by autonomous vehicles. This line of investigation is not immediately obvious and covers only a segment of the more thoroughgoing focus of the project.
For the assessment of vehicle safety in frontal collisions compatibility (which consists of self and partner protection) between opponents is crucial. Although compatibility has been analysed worldwide for over 10 years, no final assessment approach has been defined to date. Taking into account the European Enhanced Vehicle safety Committee (EEVC) compatibility and the final report to the steering committee on frontal impact [Faerber 2007] and the FP5 VC-COMPAT[Edwards 2007] project activities, two test approaches were identified as the most promising candidates for the assessment of compatibility. Both are composed of an off-set and a full overlap test procedure. In addition another procedure (a test with a moving deformable barrier) is getting more attention in current research programmes. The overall objective of the FIMCAR project is to complete the development of the candidate test procedures and propose a set of test procedures suitable for regulatory application to assess and control a vehicle- frontal impact and compatibility crash safety. In addition an associated cost benefit analysis will be performed. In the FIMCAR Deliverable D 3.1 [Adolph 2013] the development and assessment of criteria and associated performance limits for the full width test procedure were reported. In this Deliverable D3.2 analyses of the test data (full width tests, car-to-car tests and component tests), further development and validation of the full width assessment protocol and development of the load cell and load cell wall specification are reported. The FIMCAR full-width assessment procedure consists of a 50 km/h test against the Full Width Deformable Barrier (FWDB). The Load Cell Wall behind the deformable element assesses whether or not important Energy Absorbing Structures are within the Common Interaction Zone as defined based on the US part 581 zone. The metric evaluates the row forces and requires that the forces directly above and below the centre line of the Common Interaction Zone exceed a minimum threshold. Analysis of the load spreading showed that metrics that rely on sum forces of rows and columns are within acceptable tolerances. Furthermore it was concluded that the Repeatability and Reproducibility of the FWDB test is acceptable. The FWDB test was shown to be capable to detect lower load paths that are beneficial in car-to-car impacts.
For the assessment of vehicle safety in frontal collisions compatibility (which consists of self and partner protection) between opponents is crucial. Although compatibility has been analysed worldwide for over 10 years, no final assessment approach has been defined to date. Taking into account the European Enhanced Vehicle safety Committee (EEVC) compatibility and frontal impact working group (WG15) and the FP5 VC-COMPAT project activities, two test approaches have been identified as the most promising candidates for the assessment of compatibility. Both are composed of an off-set and a full overlap test procedure. In addition another procedure (a test with a moving deformable barrier) is getting more attention in current research programmes. The overall objective of the FIMCAR project is to complete the development of the candidate test procedures and propose a set of test procedures suitable for regulatory application to assess and control a vehicle- frontal impact and compatibility crash safety. In addition an associated cost benefit analysis should be performed. The objectives of the work reported in this deliverable were to review existing full-width test procedures and their discussed compatibility metrics, to report recent activities and findings with respect to full-width assessment procedures and to assess test procedures and metrics. Starting with a review of previous work, candidate metrics and associated performance limits to assess a vehicle- structural interaction potential, in particular its structural alignment, have been developed for both the Full Width Deformable Barrier (FWDB) and Full Width Rigid Barrier (FWRB) tests. Initial work was performed to develop a concept to assess a vehicle- frontal force matching. However, based on the accident analyses performed within FIMCAR frontal force matching was not evaluated as a first priority and thus in line with FIMCAR strategy the focus was put on the development of metrics for the assessment of structural interaction which was evaluated as a first priority.
The term driver assistance systems in the chapter title shall be understood to include vehicle automation. This chapter starts with a homogeneous and consistent classification and nomenclature of all kinds of driver assistance systems known and under discussion today (including vehicle automation). It thereby builds upon familiar classification schemes by the German Federal Highway Research Institute (BASt) and the standardization body SAE international. Detailed evaluation of the German legal situation for driver assistance systems and vehicle automation is provided in the following Sect. 2. In Sect. 3, an overview is given on the legal system in the US to reveal aspects relevant for vehicle automation. This is intended as initial information for those not acquainted to the US legal system which has been the first to regulate automation in several federal states. Finally, in Sect. 4, the current rating scheme of the European New Car Assessment Programme (EuroNCAP) is presented in comparison to legal instruments. The model of a consumer protection based approach proves to be a flexible instrument with great advantages in promoting new technologies. Technical vehicle regulations on the other hand rule minimum requirements. Both approaches are needed to achieve maximum vehicle safety.
Für eine quantitativ exakte Beschreibung der mit der Gefahrgutbeförderung verbundenen Risiken fehlen sowohl statistische Voraussetzungen als auch eine wissenschaftlich begründete Risikoanalyse. Eine Risikoanalyse der Gefahrgutbeförderung soll zweckmäßigerweise auf Transportketten und nicht auf den direkten Vergleich von Verkehrsträgern abstellen. Zentrale Kategorie zur Definition des Risikos sollte dabei der Unfall sein. Zusammen mit der Transportleistung sollte er das Risiko als Wahrscheinlichkeitsaussage beschreiben. Mit in die Risikobestimmung einzubeziehen ist die Unfallschwere. Im Rahmen des Beitrages schlägt eine Projektgruppe eine dreistufig angelegte Risikoanalyse vor. Die Bausteine dieser Risikoanalyse bestehen aus 1. einer mathematisch-statistischen Risikoanalyse, 2. einer Schwachstellenanalyse und 3. einem Systemmodell zur ständigen Analyse des Gefahrgutbeförderungsrisikos. Dazu werden in dem Forschungsbericht grundsätzliche Überlegungen zur Risikobewertung angestellt, auf das Regelwerk des Gefahrguttransportes eingegangen, Ausbildung, Training und Überprüfung der Fahrzeugführer behandelt sowie auf das Gefahrgut und die Gefahrgutumschließung eingegangen. Ferner befasst sich der Bericht mit der Fahrzeugtechnik, der Verkehrsinfrastruktur, Informationssystemen und der Sicherheit im Gefahrguttransport in den neuen Bundesländern. Zum Schluss werden Forschungsempfehlungen bezüglich der Sicherheit in der Gefahrgutbeförderung formuliert.
Although the bus belongs to the safest traffic means, single accidents can be particularly severe and concern many passengers. Especially in case of fires a high number of injured and killed persons can be the outcome. Fire safety of buses therefore is of high importance. With the increase of synthetic and plastic materials as a material for the interior equipment of buses and coaches because of their ood mechanical properties combined with low weight, the question arises whether the safety level has decreased in case of a fire during the last years - also compared to other means of transport. Because of the combustible plastics and their ability to release a high amount of heat the main fire load in buses is no longer the fuel but the plastic materials which are also often easy to ignite. Besides the flammability of the equipments, the production of smoke, the smoke development and propagation and its toxicity for the people as well as the testing methods and limit values are of interest. For those reasons research projects were initiated on behalf of the German Federal Highway Research Institute. At the one hand the fire behavior of coach interiors was examined in general focusing on fire propagation as well as fire detection and signalling. As result, recommendations with regard to early fire detection systems for the engine compartments and on-board extinguishing equipment were elaborated. At the other hand research is carried out to examine heat release, smoke, smoke propagation and its toxicity due to burning bus interior materials. The paper describes which effective and economically reasonable fire safety requirements for interiors of buses would improve the current situation. Proposals for amendments of current requirements are recommended including the specification of appropriate limit values. In particular, it is taken into consideration which reasonable fire safety standards from other transport sectors, especially the rail sector, should be transferred to buses.
The objectives of the FIMCAR (Frontal Impact and Compatibility Assessment Research) project are to answer the remaining open questions identified in earlier projects (such as understanding of the advantages and disadvantages of force based metrics and barrier deformation based metrics, confirmation of specific compatibility issues such as structural interaction, investigation of force matching) and to finalise the frontal impact test procedures required to assess compatibility. Research strategies and priorities were based on earlier research programs and the FIMCAR accident data analysis. The identified real world safety issues were used to develop a list of compatibility characteristics which were then prioritised within the consortium. This list was the basis for evaluating the different test candidates. This analysis resulted in the combination of the Full Width Deformable Barrier test (FWDB) with compatibility metrics and the existing Offset Deformable Barrier (ODB) as described in UN-ECE Regulation 94 with additional cabin integrity requirement as being proposed as the FIMCAR assessment approach. The proposed frontal impact assessment approach addresses many of the issues identified by the FIMCAR consortium but not all frontal impact and compatibility issues could be addressed.
For the assessment of vehicle safety in frontal collisions, the crash compatibility between the colliding vehicles is crucial. Compatibility compromises both the self protection and the partner protection properties of vehicles. For the accident data analysis, the CCIS (GB) and GIDAS (DE) in-depth data bases were used. Selection criteria were frontal car accidents with car in compliance with ECE R94. For this study belted adult occupants in the front seats sustaining MAIS 2+ injuries were studied. Following this analysis FIMCAR concluded that the following compatibility issues are relevant: - Poor structural interaction (especially low overlap and over/underriding) - Compartment strength - Frontal force mismatch with lower priority than poor structural interaction In addition injuries arising from the acceleration loading of the occupant are present in a significant portion of frontal crashes. Based on the findings of the accident analysis the aims that shall be addressed by the proposed assessment approach were defined and priorities were allocated to them. The aims and priorities shall help to decide on suitable test procedures and appropriate metrics. In general it is anticipated that a full overlap and off-set test procedure is the most appropriate set of tests to assess a vehicle- frontal impact self and partner protection.
New vehicle types are extensively tested to check almost all factors that influence ride and handling. With reference to the Association of German Car Tuners" (VDAT e.V.) valuations, approximately 10% of all cars in Germany are being modified by their owners. 28 % of those modifications" sales are divergent wheel-tire combinations, 13 % are tuning measures on the chassis suspension or wheel spacers. In almost all cases the singular modifications present a general permission for specific vehicles they have been tested in. Combined tuning measures, however, are often checked by just one inspector, following a procedure of mostly subjective assessment criteria. Today, critical attributes are only being observed, in case a vehicle is involved in an accident and the modifications are identified as crash causal factors or as a cofactor on the development of a crash. For the first time, a field study allows a survey of safety affecting chassis modifications. The test layout has to comply with some basic conditions. Different vehicle concepts with a wide margin of modifications are required to get a high transferability of the results. A total amount of more than 150 tested vehicles serves the same purpose. The tests are limited concerning the installation time of measurement techniques and the requirement that no damage, defilement or immoderate wear of the vehicles are accepted by their owners. Due to such factors as well as the driver Ìs acceptance, the vehicles are controlled by its owners instead of robots or test drivers. For keeping down the driver- influence, the lane has narrow boundaries and the driver has to drive in strictly adherence to the given instructions. After gathering all modifications, as well as static and kinematic parameters like the toe and camber angle, dynamic testing of predominantly lateral dynamics is conducted. Besides standardized tests like the ISO 3888-2 (Obstacle Avoidance) or the ISO 14512 (Braking on Surfaces with Split Coefficient of Friction), to test the influence of modified kingpin offsets caused by wheel spacers, some deviant tests are conducted. Those are required due to the demand of objective test results for road tests with vertical induced stimulation of the chassis suspension. Hence, new tests on corner braking with and without vertical stimulation have been developed. The interpretation of data includes thresholds, e.g. the maximum entrance velocity without hitting cones, on the one hand, and the analysis of characteristics of data concerning time and frequency range, "1-second values" and peak response times on the other hand. Besides the thresholds as indicators for the achievable velocities, which are mainly affected by friction coefficients, the vehicle reaction in the course of time characterizes the vehicle reaction in the threshold range and consequently the operational demands on the driver. The field study has started and promises the first long-range analysis of chassis modifications. The results offer a basis for hypothesis and resultant further test layouts for oncoming studies of the identified critical tuning measures.
Today's volumes of traffic require more and more responsibility from each individual road user in their interactions. Those who drive motor vehicles have the singular obligation to minimise the risk of accidents and hence the severity of injuries, particularly with a view to the most vulnerable road users such as motor bikes, bikes and pedestrians. Since responsible and pro-active driving depends first and foremost on the visual information relayed by our eyes and the visual channel this requires good command of the traffic and all-round visibility from our driver's seat. Granted that human error can never be fully excluded, improving visibility around the car is nevertheless an urgent priority. To do so, we need to rate visibility in the most realistic driving situations. Since the existing visibility metrics and methodology are not applicable to real-life driving situations, this study aimed at developing a new visibility rating methodology based on real-life accident scenarios. On the basis of the cases documented by the accident research project, this study analysed criteria indicative of diminishing visibility on the one hand and revealing some peculiarities in connection with the visibility issue on the other. Based on the above, the project set out to develop a rating methodology allowing to assess all-round visibility in various road situations taking into account both driver and road geometries. In this context, the assessment of visibility while turning a corner, crossing an intersection and joining traffic on a major road (priority through route) is of major importance. The first tests have shown that critical situations can be avoided by adapting the relevant geometries and technical solutions and that significant improvements of road safety can be derived therefrom.
2011 beauftragte das damalige Bundesministerium für Verkehr, Bau und Stadtentwicklung die BASt mit der wissenschaftlichen Begleitung des bundesweiten Feldversuchs mit Lang-Lkw. Lang-Lkw dürfen mit bis zu 25,25 m zwar um 6,50 m länger als nach den geltenden Regelungen ausgeführt sein; ein höheres Gesamtgewicht als die auch heute schon geltenden 40 t bzw. 44 t im Vor- und Nachlauf zum kombinierten Verkehr ist bei Lang-Lkw hingegen nicht zulässig. Der Versuch startete mit Wirkung vom 01.01.2012 und war auf die Dauer von fünf Jahren ausgelegt. Er ist Bestandteil des Aktionsplans Güterverkehr und Logistik des Bundesministeriums für Verkehr und digitale Infrastruktur. Die gesetzliche Grundlage zur Durchführung des Feldversuchs bildet die vom Bundesminister für Verkehr erlassene Verordnung über Ausnahmen von straßenverkehrsrechtlichen Vorschriften für Fahrzeuge und Fahrzeugkombinationen mit Überlänge, kurz LKWÜberlStVAusnV, vom 19.12.2011 sowie deren zugehörige Änderungs-Verordnungen. Eine der Vorgaben betraf zum Beispiel den auf ein geprüftes Streckennetz beschränkten Einsatz der Lang-Lkw, eine andere die Teilnahme an der wissenschaftlichen Begleitung. Der Zweck der wissenschaftlichen Begleitung bestand unter anderem in einer Versachlichung des Themas "Längere Lkw". Ausgehend von den Argumenten gegen längere und schwerere Lkw aus der Vergangenheit wurden auch gegen die im Feldversuch ausschließlich adressierte Vergrößerung der Länge von Interessenvertretern der Bahn, von Umweltverbänden, aber auch Automobilclubs Bedenken geäußert. Die Kritik betrifft prinzipiell und relativ pauschal folgende drei zentrale Punkte: - Die Verkehrssicherheit würde durch größere und/oder schwerere Lkw gefährdet. - Die Infrastruktur würde durch größere und/oder schwerere Lkw derart beansprucht, dass eine Ertüchtigung und/oder Instandsetzung die Allgemeinheit mit enormen Kosten belasten würde. - Durch die zu erwartende Effizienzsteigerung und damit einhergehenden Kostenvorteile im Straßengüterverkehr würden Transporte von der Schiene auf die Straße verlagert und/oder neue Verkehre auf der Straße induziert, sodass schließlich nicht weniger, sondern mehr Straßengüterverkehr stattfinden würde. Auch der Umstand, dass es sich beim Lang-Lkw um ausschließlich längere, nicht aber schwerere Lkw handelt, hat keine grundlegende Veränderung in der Diskussion gebracht. Ziel der Konzeption der wissenschaftlichen Begleitung war es, alle in der Öffentlichkeit diskutierten Hoffnungen in und Bedenken gegen den Einsatz von Lang-Lkw umfassend zu berücksichtigen. Aufbauend auf einer internationalen Literaturstudie und unter Berücksichtigung der rechtlichen Rahmenbedingungen sowie öffentlichen Diskussion wurden diejenigen Aspekte ermittelt und aufgelistet, die als mögliche Chancen und Risiken für einen Einsatz von Lang-Lkw in den verschiedenen Quellen benannt wurden. Diese Liste wurde im Rahmen eines Expertenkolloquiums im Mai 2011 diskutiert und weiterentwickelt. Zur Beantwortung der identifizierten Fragestellungen wurden mehrere Forschungsprojekte initiiert und im Feldversuchs zum Teil von der BASt selbst, überwiegend jedoch von externen Forschungsinstituten bearbeitet. Der zum Ende des Feldversuchs vorgelegte Abschlussbericht der BASt enthält neben den für die Konzeption der Gesamtuntersuchung erforderlichen rechtlichen Grundlagen und vorliegenden Erkenntnissen aus der Literatur die Zusammenfassungen der verschiedenen Forschungsprojekte aus allen Untersuchungsphasen der wissenschaftlichen Begleitung. Zusammenfassend ist zu konstatieren, dass sich bedeutende Probleme im Feldversuch nicht gezeigt haben. Gemessen an der Vielzahl betrachteter Fragestellungen ist die Anzahl der identifizierten potenziellen Herausforderungen gering. Zudem können die identifizierten Herausforderungen bei der derzeit vorhandenen Anzahl an im Feldversuch beteiligten Lang-Lkw und auch noch unter der Annahme von deutlich höheren als im Rahmen der Untersuchungen zu den Verkehrsnachfragewirkungen prognostizierten Anteilen von Lang-Lkw am Güterverkehrsaufkommen als hinnehmbar oder beherrschbar eingestuft werden. Es kann zudem festgehalten werden, dass der Einsatz des Lang-Lkw eine positive Verkehrsnachfragewirkung bezüglich einer Reduktion von gefahrenen Lkw-Kilometern und dementsprechend auch eine Reduktion von Klimagasen und Luftschadstoffen im Versuch gezeigt hat und zukünftig haben kann. Es zeigte sich bislang, dass Verlagerungseffekte von der Bahn beziehungsweise vom Binnenschiff auf den Lang-Lkw vor allem aufgrund der bestehenden Gewichts-, aber auch der tatsächlichen beziehungsweise im Modell angenommenen Streckenbeschränkungen sehr gering und damit vernachlässigbar sind. Wenngleich deutlich wird, dass der Lang-Lkw nur eine mögliche Teillösung zur Eindämmung des Güterverkehrswachstums und den damit einhergehenden Umweltwirkungen darstellt, ist der Einsatz aus betriebswirtschaftlicher und verkehrsnachfrageseitiger Sicht in bestimmten Bereichen und Einsatzfeldern sinnvoll.
Vor dem Hintergrund der derzeitigen Verkehrs- und Unfallsituation sowie verkehrsrechtlicher Vorschriften wurde durch Auswertung humanwissenschaftlicher und technischer Literatur eine Sachstandsbeschreibung erstellt, die die in Zusammenhang mit Auffahrunfällen und ihrer Verhinderung stehenden Aspekte aufzeigt. Als fahrzeugtechnische Hilfen zur Einhaltung eines ausreichenden Abstandes zwischen hintereinander fahrenden Fahrzeugen werden dabei vorrangig autarke Systeme - das sind solche, bei denen sich alle notwendigen Vorrichtungen im Fahrzeug befinden - betrachtet. Möglichkeiten und Grenzen der bekannten technischen Hilfsmittel, insbesondere der Abstandswarn- und Abstandsregelungseinrichtungen werden aufgezeigt. Es stellte sich heraus, dass den Warnstrategien sowie ihren Auswirkungen auf den Verkehrsablauf und die Verkehrssicherheit besondere Bedeutung zukommt. In diesem Zusammenhang werden auch Zielkonflikte, insbesondere zwischen Sicherheitsforderungen und Fahrerakzeptanz, deutlich. Im Teil I des Berichts erfolgt die zusammenfassende Beschreibung und kritische Wertung des Sachstandes. Im Teil II werden die Auswerteergebnisse zu den angesprochenen Fragenkomplexen im einzelnen dargestellt. Teil III enthält eine Kurzdokumentation der für die Erstellung des Berichts wesentlichsten Literaturstellen.
Im Rahmen dieser Begleitstudie zum Feldversuch mit Lang-Lkw wurde untersucht, wie die technischen Anforderungen der Verordnung über Ausnahmen von straßenverkehrsrechtlichen Vorschriften für Fahrzeuge und Fahrzeugkombinationen mit Überlänge (LKWÜberlStVAusnV) von teilnehmenden Speditionen umgesetzt wurden. Die Studie fußt auf den der BASt von den am Feldversuch teilnehmenden Speditionen zur Verfügung gestellten Daten sowie Fahrzeugbegutachtungen und Fragebögen. Sie bildet den Stand vom 23.06.2016 mit 147 Lang-Lkw von 58 Speditionen ab. 80 Lang-Lkw vom Typ 3 bilden hierbei den größten Anteil. Alternative Umsetzungsmöglichkeiten technischer Anforderungen wurden speziell bei Achslastüberwachungssystemen, Kamera-Monitor-Systemen am Heck und der Tauglichkeit für den Kombinierten Verkehr betrachtet. Bei den Achslastüberwachungssystemen zeigte sich, dass sich bei 80 % der Fahrzeuge alle Achslasten komfortabel direkt im Fahrerhaus ablesen lassen. Kamera-Monitor-Systeme am Heck werden von den Feldversuchsteilnehmern überwiegend als praxistauglich bewertet und insbesondere als Rangierhilfe positiv aufgenommen. Bei Bremswegmessungen zeigte sich, dass auf ihr zulässiges Gesamtgewicht von 40 t beladene Lang-Lkw einen geringfügig längeren Bremsweg aufweisen als Sattelzüge, die mit der gleichen Ladungsdichte, jedoch weniger Ladung auf ca. 28 t Gesamtgewicht volumetrisch voll beladen sind. Bei ganzheitlicher Betrachtung sowohl der Vorgängerstudie als auch dieser Studie kann jedoch von vergleichbaren Bremswegen von Lang-Lkw im Vergleich zu Lkw herkömmlicher Bauart ausgegangen werden. Die Wirksamkeit von Fahrdynamikregelsystemen bei Lang-Lkw wurde im Rahmen von Literaturrecherchen sowie Experten- und Herstellerinterviews untersucht. Die Auslegung der Systeme ist so gestaltet, dass sie den Lang-Lkw verlässlich stabilisieren und zur Fahrzeugsicherheit von Lang-Lkw beitragen.
Die zukünftige Entwicklung der Straßenverkehrssicherheit und damit auch der Fahrzeugsicherheit wird durch gesellschaftliche, wirtschaftliche, klimapolitische und verkehrspolitische Rand- und Rahmenbedingungen und die voranschreitende technische Entwicklung geprägt sein, die auch für den Gesetzgeber eine Herausforderung darstellen. So wird sich auch das Folgeprogramm des Bundesministeriums für Verkehr, Bau und Stadtentwicklung (BMVBS) für das derzeitige aus dem Jahr 2001 stammende "Programm für mehr Sicherheit im Straßenverkehr" an den Schwerpunkten des "4th Road Safety Action Programme" ausrichten, das im Frühjahr 2010 durch die EU-Kommission veröffentlicht werden soll. Im Prozess zu einer weiteren Verbesserung der Straßenverkehrssicherheit werden unter anderem der demografische Wandel in unserer Gesellschaft, die durch eine erforderliche CO2-Reduktion bedingte Einführung alternativer Antriebe (Elektromobilität) verbunden mit Leichtbau sowie die gesetzlichen Rahmenbedingung (Wiener Abkommen) eine bedeutende Rolle spielen. Die Klärung der gesetzlichen Rahmenbedingungen ist unerlässlich, um die Vision vom unfallfreien Fahren Realität werden lassen zu können.
Die Europäische Kommission strebt an, die Zahl der im Straßenverkehr Getöteten in der EU bis zum Jahr 2010 zu halbieren, unter anderem durch den Einsatz von fahrzeuggestützten Notrufsystemen. Ziel der vorliegenden Studie ist es, die spezifischen Rahmenbedingungen in Deutschland für die mögliche Einführung eines fahrzeuggestützten Notrufsystems zu analysieren und eine darauf abgestimmte Umsetzungsempfehlung zu erarbeiten. Methodik: Im Rahmen einer deskriptiven Analyse werden einerseits die deutschen Rahmenbedingungen bezüglich der Straßenverkehrsunfälle sowie der Strukturen und Leistungen des Rettungsdienstes erfasst. Andererseits werden Anforderungen an fahrzeuggestützte Notrufsysteme formuliert und die bestehenden Systemlösungen untersucht. Nach einer Klassifikation der möglichen Systemvarianten werden zwei ausgewählte Systemvarianten mit der Methodik der gesundheitsökonomischen Evaluation (Kosten-Wirksamkeits-Analyse) aus gesellschaftlicher Sicht analysiert. Zur qualitativen Bewertung wird eine Nutzwertanalyse mittels einer Befragung verschiedener Interessengruppen durchgeführt. Ergebnis: Je nach betrachteter Systemvariante und Ausgestaltungsform entstehen Kosten (inklusive Kosteneinsparungen) in Höhe von 1,5 bis 5,5 Milliarden Euro für die Gesellschaft. Werden diese Kosten auf die mit eCall ausgestatteten Fahrzeuge verteilt, ergeben sich rechnerisch pro Fahrzeug Kosten in Höhe von 47 bis 168 Euro. Diesen stehen im Betrachtungszeitraum von zehn Jahren 390 bis 438 gerettete Personen und eine Reduktion der Anzahl der Schwerverletzten um 11.879 bis 13.364 entgegen. Lediglich bei der kostengünstigsten Ausgestaltungsform des eCall-Systems im Fahrzeug als integrierte Lösung können die Kosteneinsparungen die Kosten für die Gesellschaft übersteigen. Unter monetär bewerteten Kosten- und Nutzengesichtspunkten aus gesamtgesellschaftlicher Perspektive kommt der organisatorischen Ausgestaltungsform des Systems (zentral/dezentral) keine Bedeutung zu. Im Rahmen der Nutzwertanalyse konnte bei den unterschiedlichen Interessengruppen keine eindeutige Präferenz für eine der Systemvarianten festgestellt werden. Die Vertreter der Automobilindustrie, der Medizin, der Politik/Gesellschaft, des Rettungsdienstes und der Wissenschaft bevorzugen die Systemvariante, bei der die Erstbearbeitung der Notrufe in den dezentral organisierten Rettungsleitstellen erfolgt. Die Vertreter der Automobil-Zulieferindustrie, der Serviceprovider und der Versicherungen ziehen die Systemvariante vor, die auf einer zentralen Erstbearbeitung der Notrufe beruht. Fazit: Die Einführung eines fahrzeuggestützten Notrufsystems in Deutschland ist mit hohen gesellschaftlichen Kosten verbunden, die in der Basisbetrachtung mit realistischen Annahmen deutlich über dem monetär bewerteten Nutzenpotenzial liegen. In der vorliegenden Evaluation wird deutlich, dass Kosteneinsparungen für die Gesellschaft auch bei optimistischen Nutzenannahmen in Bezug auf die Wirksamkeit zur Reduzierung der Getöteten und Schwerverletzten im Straßenverkehr nur bei den kostengünstigsten Varianten von fahrzeuggestützten Notrufsystemen realisierbar sind. Im Rahmen dieser Studie kann deshalb für die europaweite Einführung von fahrzeuggestützten Notrufsystemen nur die kostengünstigere Variante empfohlen werden, die in den Fahrzeugen bereits vorhandene Module (zum Beispiel GNSS-Systeme und das Mobilfunktelefon der Insassen) einbezieht. Eine freiwillige Markteinführung der Systeme würde dazu führen, dass eCall-Systeme insbesondere dann in Fahrzeugen integriert werden, wenn dafür geringe Mehrkosten anfallen oder wenn Risikogruppen ihren Nutzen besonders hoch einschätzen. Bei einem derartigen Implementierungsszenario würden damit die Kosten, die den Systemen zuzurechnen sind, sinken, da vorhandene Technik im Fahrzeug genutzt wird. Bei einer freiwilligen Einführung von fahrzeuggestützten Notrufsystemen in Deutschland wird letztlich der Nutzer über den Erfolg von eCall entscheiden.
Die Schwerpunkte dieses Projekts lagen in der Untersuchung der Fahrerverfügbarkeit und Müdigkeit sowie in der Herstellung natürlichen Verhaltens bei längeren hochautomatisierten Fahrten. Es konnte im Rahmen von zwei Fahrsimulationsversuchen mit 15 und 42 Probanden gezeigt werden, dass bei hochautomatisierten Fahrten von 60 Minuten Müdigkeit auftreten kann, bei Ausprägung und Zeitpunkt des Auftretens jedoch große individuelle Unterschiede bestehen. Da eine zu kleine Stichprobe sich zum Zeitpunkt der Übernahme in einem entsprechend müden Zustand befand, kann die Auswirkung von Müdigkeit auf das Übernahmeverhalten nicht abschließend beurteilt werden. Hierfür empfehlen sich für die Zukunft Studien mit einem zustandsabhängigen Versuchsdesign. Der Einsatz von natürlichen fahrfremden Tätigkeiten, mit denen die Probanden sich frei beschäftigen durften, zeigte sowohl in der Probandstudie im Fahrsimulator als auch bei einem Expertenworkshop im Realfahrzeug eine hohe Involviertheit der Probanden in die Tätigkeiten während der gesamten 60 Minuten hochautomatisierten Fahrens. Es wird vermutet, dass dies auf die hohe intrinsische Motivation und den hohen Unterhaltungswert der selbstgewählten Aktivitäten zurückzuführen ist. Es zeigte sich außerdem, dass die Wahl der Tätigkeit vom Alter der Probanden abhängig ist. Eine Fahrtdauer von 60 Minuten wurde aufgrund der Ergebnisse aus allen drei Versuchen als realistisches Zukunftsszenario eingestuft und besitzt daher eine hohe Relevanz. Sowohl für die Bewertung von Müdigkeit als auch von Ablenkung war das Blickverhalten am meisten aufschlussreich. Für die Bewertung von Müdigkeit während der Beschäftigung mit fahrfremden Tätigkeiten wird jedoch ein kopfbasiertes Blickerfassungssystem, welches in der Lage ist, den Augenöffnungsgrad zu erfassen, oder videobasierte Verhaltensbeobachtung empfohlen.
Zum gegenwärtigen Zeitpunkt werden verschiedene Ansätze diskutiert, wie der Verbesserung der Straßenverkehrssicherheit durch den Einsatz moderner Fahrerassistenzsysteme (FAS) neue Impulse gegeben werden können. Unter dem Dach der von der Europäischen Kommission gemeinsam mit der Industrie im Frühjahr 2002 ins Leben gerufenen eSafety-Initiative soll die Entwicklung und Implementierung "Intelligenter Integrierter Sicherheitssysteme" (Intelligent Integrated Road Safety Systems) koordiniert und vorangetrieben werden. Erwartet werden hiervon entscheidende Beiträge zur Erreichung der bis zum Jahr 2010 angestrebten Halbierung der Zahl der Verkehrstoten in Europa, entsprechend dem Weissbuch der Europäischen Kommission. Intelligente Unterstützung des Fahrers meint in diesem Zusammenhang die Berücksichtigung des Gesamtsystems "Fahrer-Fahrzeug-Umwelt". Für die fahrzeugseitige Umsetzung der Unterstützungsfunktion wurden verschiedene Ausformungsgrade (zum Beispiel Information, Warnung, korrigierender Eingriff) vorgeschlagen und entwickelt. Die BASt ist an einer Reihe von Projekten und Arbeitsgruppen beteiligt, die sich direkt oder indirekt mit Fragen befassen, die sich bei der Entwicklung und Bewertung intelligenter FAS zur Beeinflussung der Fahrzeuggeschwindigkeit stellen. Im Mittelpunkt stehen dabei vor allem Fragen der Sicherheitsbewertung und der Machbarkeit, wie zum Beispiel - Realisierung der fahrzeugseitigen Umsetzung, - Kosten-Nutzen-Gesichtspunkte, - Rechtliche Aspekte, - Voraussetzungen der Datenbasis. Beispielsweise ist die BASt an der von ERTICO koordinierten "SpeedAlert"-Initiative beteiligt. Ziel dieser Aktivität ist die europaweite Implementierung eines Geschwindigkeitswarnsystems. An der hierzu im Jahre 2001 gegründeten "SpeedAlert" Arbeitsgruppe beteiligen sich Industrie und Verwaltung.
Ziel des Forschungsvorhabens war es, durch gezielte Auswertung des Unfallgeschehens den Einfluss von Fahrerverhaltensweisen beziehungsweise -merkmalen und technischen Fahrzeugparametern auf die Unfallhäufigkeit und die Unfallart zu ermitteln. Zunächst wurde eine Auswertung der Literatur und die Beschaffung und Aufbereitung des Datenmaterials vorgenommen. Die Grundlage der Auswertungen bildeten die Unfälle mit Pkw-Beteiligung im Bundesland Nordrhein-Westfalen aus dem Jahre 1980. Die Datensätze waren vom Kraftfahrt-Bundesamt in Flensburg um fahrzeugtechnische Angaben erweitert worden. Zur Relativierung der Unfallzahlen wurden fahrzeugtypenspezifische jährliche Fahrleistungen und Bestände berechnet. Weiterhin wurde das Geschwindigkeitsverhalten im freien Verkehr in Abhängigkeit vom Fahreralter sowie vom Fahrzeugtyp ermittelt. Um die Wechselwirkungen von Fahrer- und Fahrzeugeigenschaften im Unfallgeschehen unabhängig voneinander betrachten zu können, war es notwendig, einen "Normalfahrer" zu definieren. Der "Normalfahrer" wurde anhand von Analysen ausgewählter Unfallsituationen mit dem Ziel beschrieben, mit diesen Fahrern Fahrversuche mit Pkw durchführen zu können, deren Ergebnisse weder durch besonders gute noch durch besonders schlechte, sondern vielmehr durch eine durchschnittliche Eignung des Fahrers zum Führen eines Kraftfahrzeuges geprägt sein sollen. Anhand dieser Fahrversuche sollen Grenzen von Kennwerten, die Fahrzeugeigenschaften und das Fahrverhalten beschreiben, abgeleitet werden, die sich als dem "Normalfahrer" angepasst erweisen. Aufgrund der aufgezeigten Zusammenhänge zwischen dem Fahreralter und der ursächlichen Beteiligung an bestimmten Unfalltypen ist es nunmehr möglich, durchschnittlich gute Fahrer als Probanden auszuwählen, die je nach Art des Versuches entweder zur Gruppe der jüngeren und älteren Fahrer gehören. Nach vorheriger Festlegung eines Anteilswertes von Fahrern, die als "normal" anzusehen sind, können bei gleichzeitiger Berücksichtigung der für jüngere und ältere Fahrer typischen Versagensarten die Altersintervalle bestimmt werden, aus denen die "Normalfahrer" für die Fahrversuche auszuwählen sind.
The paper gives an overview of the recent (mostly 2012) figures of killed bus/coach occupants (drivers and passengers) in 27 Member States of the European Union as reported by CARE. The Evolution of the figures of bus/coach occupants killed in road accidents urban, rural without motorway and on motorways from 1991 to 2010 in 15 Member States of the EU supplements this information. More detailed are the figures reported for Germany by the Federal Statistics. The paper displays long-term evaluations (1957 to 2012) for killed, seriously and slightly injured occupants in all kinds of buses/coaches. Midterm evaluations (1995 to 2012) of the figures of fatalities and casualties are displayed for different busses according to their identification of road using as coaches, urban buses, school buses, trolley buses and "other buses". To be able to compare the evolutions of the safety of vehicle occupants it is customary to use different risk indicators. Calculations and illustrations for three often used indicators with their development over time are given: fatalities, seriously injured and slightly injured per 100,000 vehicles registered, per 1 billion (109) vehicle-kilometres travelled and per 1 billion (109) person-kilometres. These indicators are shown for occupants of cars, goods vehicles and buses/coaches. For the period from 1957 until 2012 it is obvious, that for all three vehicle categories analysed there was a clear long-term trend towards more occupant safety in terms of casualties per vehicles registered and per vehicle mileage. This was most significant for car occupants but it can be seen for bus/coach occupants and goodsvehicle occupants as well. Figures of killed occupants and of casualties related to person-kilometres are calculated and displayed for the shorter period 1995 to 2012. Here it becomes obvious that the bus/coach is still the safest mode of transport for the occupants of road vehicles. Graphs for the casualty risk indices still show significantly higher risks for car occupants despite the corresponding curve moved sustainable downwards. It is remarkable, that the risks of being killed or injured for the occupants of urban buses is growing whereas the corresponding risk for the occupants of coaches in line traffic tends downwards. The article ends with a short comparison and discussion of the risk indicators which are actually published for the occupants (driver and passengers) of cars and the passengers of buses/coaches, railroads, trams and airplanes. The interpretation of such information depends on the perception and it seems that for a complete view not only one indicator should be used and the evolutions of the indicator values during longer periods (as displayed with examples in the paper) should also be taken into account.
Beschrieben wird die Evaluierung eines Testverfahrens der Arbeitsgruppe 10 des European Experimental Vehicle Committee, mit dem die "Fußgängerverträglichkeit" von Frontflächen von Personenkraftwagen bestimmt werden kann. Dabei werden verschiedene Anprallarten von Fußgängern an Fahrzeugen simuliert: der Anprall eines Beines an den Stoßfänger, der Anprall des Oberschenkels an die Vorderkante der Fronthaube und der Anprall des Kopfes auf die Fronthaube. Im Beitrag wird auf die Durchführung von Tests zum Oberschenkelanprall und zum Beinanprall an drei verschiedenen Fahrzeugtypen eingegangen. Beschrieben werden Testverfahren, Versuchsaufbau und Versuchsdurchführung. Die Versuchsreihe zeigte, dass das entwickelte Testverfahren praktikabel ist.
Thoracic injury is one of the predominant types of severe injuries in frontal accidents. The assessment of the injury risk to the thorax in the current frontal impact test procedures is based on the uni-axial chest deflection measured in the dummy Hybrid III. Several studies have shown that criteria based on the linear chest potentiometer are not sensitive enough to distinguish between different restraint systems, and cannot indicate asymmetric chest loading, which has been shown to correlate to increased injury risk. Furthermore, the measurement is sensitive to belt position on the dummy chest. The objective of this study was to evaluate the optical multipoint chest deflection measurement system "RibEye" in frontal impact sled tests. Therefore the sensitivity of the RibEyesystem to different restraint system parameters was investigated. Furthermore, the issue of signal drop out at the 6 th rib was investigated in this study.A series of sled tests were conducted with the RibEye system in the Hybrid III 50%. The sled environment consisted of a rigid seat and a standard production three-point seat belt system. Rib deflections were recorded with the RibEye system and additionally with the standard chest potentiometer. The tests were carried out at crash pulses of two different velocities (30 km/h and 64 km/h). The tests were conducted with different belt routing to investigate the sensitivity of chest deflection measurements to belt position on the dummy chest. Furthermore, different restraint system parameters were investigated (force limiter level, with or without pretensioning) to evaluate if the RibEye measurements provide additional information to distinguish between restraint system configurations . The results showed that with the RibEye system it was possible to identify the effect of belt routing in more detail. The chest deflections measured with the standard chest potentiometer as well as the maximum deflection measured by RibEye allowed the distinction to be made between different force limiter levels. The RibEye system was also able to clearly show the asymmetric deflection of the rib cage due to belt loading. In some configurations, differences of more than 15 mm were observed between the left and side areas of the chest. Furthermore, the abdomen insert was identified as source of the problem of signal drop out at the 6th rib. Possible solutions are discussed. In conclusion, the RibEye system provided valuable additional information regarding the assessment of restraint systems. It has the potential to enable the evaluation of thoracic injury risk due to asymmetric loading. Further investigations with the RibEye should be extended to tests in a vehicle environment, which include a vehicle seat and other restraint system components such as an airbag.
Evaluation of the performance of competitive headforms as test tools for interior headform testing
(2009)
The European Research Project APROSYS has evaluated the interior headform test procedure developed by EEVC WG 13, representing the head contact in the car during a lateral impact. One important aspect within this test procedure was the selection of an appropriate impactor. The WG13 procedure currently uses the Free Motion Headform as used within the FMVSS 201. The ACEA 3.5 kg headform used in Phase 1 of the European Directive and the future European Regulation on Pedestrian Protection is still discussed as a possible alternative. This paper reports work performed by the Federal Highway Research Institute (BASt) as a part of the APROSYS Task 1.1.3. The study compares the two headform impactors according to FMVSS and ACEA, in a series of basic tests in order to evaluate their sensitivity towards different impact angles, impact accuracy, the effect of differences to impactors of the same type and the effects of the repeatability and reproducibility of the test results. The test surface consisted of a steel tube covered with PU foam and PVC, representing the car interior to be tested. Despite of the higher mass of the FMH the HIC values of this impactor were generally lower than those of the ACEA headform. The FMH showed a higher repeatability of test results but a high sensitivity on the angle of roll, the spherical ACEA impactor performed better with regards to the reproducibility. In case of the ACEA impactor-, the angle of roll had no influence.
The PDB, BASt and Opel conducted two test series to evaluate possible effects on the results obtained using the EEVC WG17 Lower Legform Impactor as a test tool for the assessment of pedestrian safety. The reproducibility and repeatability of the test results were assessed using six legform impactors while keeping the test parameters constant. In the second series one impactor was used and the test parameters were varied to assess the effects on the readings of the legform. The test parameters were velocity, temperature, relative humidity, the point of first contact regarding the deviation in z-direction and the deviations of the pitch, roll and yaw angle. The tests were performed using an inverse setup, i.e. the legform was hit by a guided linear impactor equipped with a honeycomb deformation element. This setup was chosen to be able to vary each single parameter while avoiding variations of the other test parameters at the same time. The test parameters were varied stronger than allowed in regulatory use in order to determine possible dependencies between the parameters and the readings which were acceleration, bending angle and shear displacement.