Filtern
Erscheinungsjahr
Dokumenttyp
- Buch (Monographie) (224)
- Wissenschaftlicher Artikel (89)
- Konferenzveröffentlichung (82)
- Bericht (11)
- Arbeitspapier (11)
- Teil eines Buches (Kapitel) (5)
- Sonstiges (1)
Sprache
- Deutsch (355)
- Englisch (67)
- Mehrsprachig (1)
Schlagworte
- Bewertung (423) (entfernen)
Institut
Im Rahmen dieses Forschungsprojektes waren geeignete kontinuierlich messende Verfahren zur kontinuierlichen Bewertung der Griffigkeit von Fahrbahnmarkierungen aufzuzeigen und mögliche Zusammenhänge zwischen diesen kontinuierlichen Verfahren und den Ergebnissen des SRT-Pendelverfahrens herzuleiten. Hierdurch sollten die Grundlagen für eine kontinuierliche Messung der Griffigkeit von Fahrbahnmarkierungen, insbesondere im Hinblick auf die zunehmende Ausschreibung von Baumaßnahmen in Form von Funktionsbauverträgen oder ÖPP-Projekten, erarbeitet werden. Diesbezüglich wurden auf Grundlage einer Literaturrecherche drei kontinuierliche Griffigkeitsmesssysteme in die Untersuchungen einbezogen - das ViaFriction, der GripTester und das SKM-Messsystem. Um Vergleichswerte mit dem Standardbewertungsverfahren herleiten zu können, wurden drei verschiedene Markierungsmaterialien (Farbe, Kaltplastik und Folie) mit verschiedenen Griffigkeitsstufen auf einer Teststrecke appliziert und anschließend mit den kontinuierlichen Messsystemen sowie dem SRT-Pendelgerät hinsichtlich der Griffigkeit bewertet. Hierbei konnte eine Griffigkeitsspanne von 35 bis 75 SRT-Einheiten realisiert werden. Als Ausgangspunkt der Untersuchungen dienten Vorversuche, die die erforderlichen Randbedingungen für eine kontinuierliche Bewertung der Griffigkeit von Fahrbahnmarkierungen definierten und die Grundlage für die anschließenden Hauptversuche bildeten. Betrachtet wurden hierbei der Einfluss der Markierungsbreite, der Messgeschwindigkeit sowie der Markierungsart (durchgängig oder nicht-durchgängig) auf die sogenannte "Erfassungsgüte", d. h. die Qualität der Markierungsüberfahrt, der kontinuierlichen Verfahren ViaFriction und GripTester. Von einem Einsatz des SKM-Messfahrzeuges im Rahmen der Vorversuche wurde in Abstimmung mit dem Auftraggeber abgesehen. Die Ergebnisse der Vorversuche zeigten, dass sowohl bei dem ViaFriction als auch bei dem GripTester die Qualität der Messungen durch die gleichen Faktoren beeinflusst wird. Demgemäß wurde ersichtlich, dass die Erfassungsgüte der Messungen von der Markierungsbreite abhängt. Eine Abhängigkeit von der Messgeschwindigkeit konnte im Rahmen der Vorversuche nicht nachgewiesen werden. Dies konnte allerdings in weitergehenden Untersuchungen auf einer längeren Messstrecke im Rahmen der späteren Hauptversuche nachgewiesen werden. Weiterhin wurde ersichtlich, dass gültige Messungen auf nicht-durchgängigen Fahrbahnmarkierungen unter Berücksichtigung notwendiger Übergangsbereiche beim Übergang zwischen Straßenoberfläche und Fahrbahnmarkierung und der Aufzeichnungsfrequenz der Messverfahren nicht bzw. lediglich bei reduzierter Messgeschwindigkeit realisiert werden konnten. Im Rahmen der Hauptversuche konnten anhand von Vergleichsuntersuchungen mit dem SRT-Pendelverfahren und den drei kontinuierlich messenden Verfahren (ViaFriction, GripTester und SKM) Vergleichswerte für die Einhaltung der Mindestgriffigkeit von 45 SRT-Einheiten gemäß ZTV M 02 bzw. 50 SRT-Einheiten als "Übergabewert" gemäß dem Diskussionspapier "Leitfaden funktionale Anforderungen an Fahrbahnmarkierungen" [FASA 2010/Juni; 2010] hergeleitet werden. Dies bildet die Grundlage für eine "mitschwimmende" Bewertung der Griffigkeit von Fahrbahnmarkierungen unter Verkehr. Weiterhin wurden für jedes kontinuierlich messende Verfahren und für jede Messgeschwindigkeit "μ-Vertrauensbereiche", "μ-Unschärfebereiche" und "μ-Verwerfungsbereiche" unter Berücksichtigung der Messabweichungen der Verfahren definiert. Hierdurch ließe sich zukünftig der Umfang notwendiger SRT-Messungen für die Bewertung des Griffigkeitszustandes von Fahrbahnmarkierungen auf ein Minimum reduzieren. Lediglich im "Unschärfebereich" sind ergänzende SRT-Messungen durchzuführen, um die Aussagen der kontinuierlichen Messungen zu präzisieren. Im Vertrauens- oder Verwerfungsbereich sind demgegenüber derartige ergänzende Messungen nicht erforderlich. Als Ergebnis der jetzigen Untersuchungen ist zusammenfassend festzuhalten, dass sich die in die Untersuchungen einbezogenen kontinuierlichen Messsysteme grundsätzlich für die kontinuierliche Messung der Griffigkeit von Fahrbahnmarkierungen als geeignet erwiesen haben. Dennoch wird zum jetzigen Zeitpunkt empfohlen, die kontinuierliche Bewertung der Griffigkeit von Fahrbahnmarkierungen nicht allein für die Griffigkeitsbewertung von Markierungen in der Praxis heranzuziehen, sondern ergänzend zu dem SRT-Pendelverfahren einzusetzen. Vielmehr wird dazu geraten, vorab die zugrunde liegende Datenbasis auszuweiten, indem weitere Markierungsmaterialien sowie zusätzliche Griffigkeitsstufen betrachtet werden. Im Hinblick auf den zunehmenden Einsatz von Strukturmarkierungen oder Agglomeraten erscheint auch die Bewertung der Griffigkeit von derartigen Fahrbahnmarkierungen mit kontinuierlich messenden Verfahren als sinnvoll.
Die Prüfeinrichtung Wehner/Schulze der zweiten Generation, damit ist der Nachbau der von WEHNER und SCHULZE gebauten Berliner Maschine ab dem Jahr 2002 gemeint, wird inzwischen in einigen europäischen Ländern eingesetzt. Die Gerätebeschreibung und die Prognoseprüfung für Asphaltoberflächen sollen nun in das europäische Regelwerk übernommen werden. Ein Entwurf für die EN 12697-49 wird derzeit bearbeitet. Obwohl die Prüfeinrichtung derzeit nur von dem Prüfgerätehersteller hergestellt und vertrieben wird, ist die Festlegung von Maschinenparametern und Toleranzen bei der Beschreibung der Prüfeinrichtung nicht unproblematisch. Viele Parameter können durch die maschinenbautechnische Seite beschrieben werden, bspw. Maßtoleranzen der Bauteile, andere werden allerdings erst durch die vielfache Anwendung definiert. Als Beispiel sei die Temperaturverteilung des Wasser-Quarzmehl-Gemisches genannt: Es wurde eine maximale Temperatur definiert, die durch ein Kühlsystem kontrolliert wird. Die tatsächliche Temperaturverteilung unterhalb der maximalen Temperatur und die Toleranzen ergeben sich allerdings erst durch den Messbetrieb und die Laborbedingungen selbst. Um die bei der BASt gewonnenen Erfahrungen mit der Prüfeinrichtung Wehner/Schulze systematisch auszuwerten und festzuhalten, wurden die neben der Prüfgröße μPWS aufgezeichneten Daten ausgewertet. Es wurde zudem ein Vorschlag ausgearbeitet, der dem Bediener der Prüfeinrichtung online die Einhaltung der erforderlichen Parameter anzeigt. Hinsichtlich der Präzision und Vergleichbarkeit der Prüfergebnisse wird in den zuständigen Fachgremien diskutiert. Hintergrund ist vor allem ein teilweise unterschiedlicher Ausbaustand der Prüfeinrichtungen (wobei die Modifikationen in der Regel die Bedienbarkeit betreffen) sowie die nur eingeschränkten Möglichkeiten, die Prüfeinrichtung auf ihre Funktionstüchtigkeit zu überprüfen. Für die Überprüfung der Messeinrichtung werden regelmäßig Messungen auf einer texturierten Glasplatte durchgeführt. Für die Überprüfung der Poliereinrichtung existiert jedoch keine Prüfoberfläche. Im vorliegenden Projekt wurde daher die Möglichkeit des Einsatzes von Schleifpapieren als Kontrollmedium untersucht.
Auf Initiative des Bundesministeriums für Verkehr, Bau und Stadtentwicklung wird die Kampagne "Runter vom Gas!" seit Dezember 2011 mit verändertem Konzept und neuen Kommunikationsinhalten fortgeführt. Die neuen Plakatmotive und andere Medien sprechen nunmehr neben dem Hauptthema der nicht angepassten Fahrgeschwindigkeiten ein breites Spektrum weiterer problematischer Verhaltensweisen im Straßenverkehr an. Im Rahmen des Evaluationsprojekts wurde zum einen die Medienresonanz auf die aktuelle Kampagnenfortsetzung untersucht. Die Auswertung thematischer Berichte ergab ein mit früheren Wellen vergleichbares Medienecho, wobei sich die Medien mit Bewertungen zurückhielten. Die größere thematische Breite der Kampagne wurde dagegen recht intensiv in den Berichten wiedergegeben. Die Medienresonanz fällt damit insgesamt verhalten-positiv aus, erreicht aber nicht ganz das Niveau früherer Kampagnenwellen, bei denen insbesondere die Furchtappell-Motive viel Berichterstattung angeregt hatten. Zudem wurden in einer repräsentativen Umfrage die Bekanntheit der Kampagne und das Problembewusstsein der Bevölkerung untersucht. Die Befunde zeigen, dass eine Aktualisierung der Bekanntheit von "Runter vom Gas!" in der Bevölkerungsbreite gelungen ist. Auch erhalten die neuen Motive positive Bewertungen. Andererseits erweist sich die neue Argumentation über soziale Verantwortung für Mitmenschen als schwieriger verständlich und scheint gerade bei der Risikogruppe der jungen Fahrer nicht optimal "anzukommen". Aus den Befunden der beiden Studien wird eine Reihe von Handlungsempfehlungen abgeleitet, insbesondere eine gestalterische Weiterentwicklung hin zu mehr Aktivierung oder Betroffenheit, eine stärkere Nutzung von Online-Kanälen, ein Ausbau der erfolgreichen Sonderaktionen ("Below the line") sowie eine Ausdifferenzierung der Kampagnenarchitektur hin zu eigenständig konzipierten Sub-Kampagnen für spezifische Risikogruppen und -themen.
Aus einer aktuellen BASt-Studie ("Legalbewährung nach Neuerteilung der Fahrerlaubnis") geht hervor, dass eine Fahrerlaubnisentziehung bei mehrfach verkehrsauffälligen Fahrern nicht unbedingt zur Verhaltensänderung führt: Personen, denen der Führerschein wegen Überschreitens der Punktegrenze entzogen wurde, bergen ein doppelt so hohes Risiko, schuldhaft einen Unfall zu verursachen, wie Personen, deren Fahrerlaubnis wegen Alkohol- oder Drogenkonsums entzogen wurde. Eine Interventionsmaßnahme im Rahmen des Punktsystems stellt ein Hilfsangebot dar, das Fahrerlaubnisinhabern die Möglichkeit gibt, ihr riskantes Fahrverhalten mit professioneller Unterstützung langfristig zu verändern, um zukünftig regelkonform am Straßenverkehr teilzunehmen. Eine Interventionsmaßnahme kann damit einen wichtigen Beitrag zur Reduktion des Unfallrisikos von mehrfach verkehrsauffälligen Fahrern und damit zur Erhöhung der Verkehrssicherheit leisten. Für die bisherigen Aufbauseminare für Punkteauffällige (ASP) konnte kein Wirksamkeitsnachweis erbracht werden. Aus wissenschaftlicher Sicht wurde der den Aufbauseminaren zugrunde liegende Moderationsansatz kritisch hinterfragt. So geht aus einem Gutachten über die Qualität der Aufbauseminare hervor, dass Zweifel bestehen, dass das Ziel der Einstellungsänderung verkehrsauffälliger Fahrer mit dem zugrundeliegenden Ansatz erreicht werden kann. Vor diesem Hintergrund wurde die BASt im Rahmen der Reform des Verkehrszentralregisters vom Bundesministerium für Verkehr, Bau und Stadtentwicklung (BMVBS) im Juni 2012 beauftragt, die Grundlagen für ein wissenschaftlich begründetes Konzept für eine neue, wirksame Interventionsmaßnahme (Fahreignungsseminar, FES) für Punkteauffällige vorzulegen. Die Grundlagen zum Fahreignungsseminar wurden in drei Forschungsprojekten erarbeitet. Diese werden im vorliegenden Bericht dargestellt. Teil 1: Optimierung der Interventionsmaßnahmen im Rahmen der Reform des Mehrfachtäter-Punktsystems. Teil 2: Konzeption einer edukativen Teilmaßnahme der Fahreignungsseminare für verkehrsauffällige Kraftfahrer. Teil 3: Entwicklung eines Rahmenlehrplans für den edukativen Teil des im Rahmen der Reform des Punktsystems geplanten Fahreignungsseminars.
Since integrated safety systems combine active and passive safety elements in one safety system, it is necessary to define new procedures to evaluate vehicle safety from the overall system point of view. The main goal of the ASSESS project is to develop harmonized and standardized assessment procedures for collision mitigation and avoidance systems. Methods and Data Sources: In ASSESS, procedures are developed for: driver behaviour evaluation, pre-crash system performance evaluation, crash performance evaluation, socio-economic assessment. This paper will concentrate on the activities related to the crash evaluation. The objective is to perform simulations, sled tests and crash tests in order tounderstand the influence of the activation of the pre-crash systems on the occupants" injuries during the crash phase. When a traffic accident is unavoidable, pre-crash systems work on various safety devices in order to improve the vehicle occupants" protection. Braking assistance and adaptive restraint systems are the main pre-crash systems whose effect on the occupants" protection will be described in this paper. Results: The results will be a description of the effect of the activation of the pre-crash systems on the crash phase. Additionally, a set of recommendations for future methodology developments will be delivered. Furthermore, a first approach to the study of the effect of the pre-crash systems activation on the occupants" protection when the impact is unavoidable will be presented. This effect will be quantified using the biomechanical values obtained from the simulation and testing activities and their related injury risks. Simulation and testing activities will consider the following scenarios: - No activation of any pre-crash system, - Activation of one or a combination of several pre-crash systems. In this way, differences in the results obtained from different scenarios will show the effect of each pre-crash system separately during the crash phase. Discussion and Limitations: The set of activities developed in this research project is limited by the fact that with the given resources only a limited number of vehicle models could be investigated. In addition, there are also limitations related to the injury risk curves and the passive safety tools currently on the market. Conclusion and Relevance to session submitted: The paper will present a complete analysis of the effect of pre-crash systems during the crash phase when the impact is unavoidable. Details, limitations and first application experience based on a few examples will be discussed. Currently, there is not any regulation, assessment program, or other similar official procedure able to assess pre-crash systems during the crash phase. This project comprises phases of traffic accidents which have been historically analysed separately, and aims to evaluate them taking into account their interrelationship. ASSESS is one of the first European projects which deals in depth with the concept of integrated safety, defining methodologies to analyse vehicle safety from a global point of view.
A biofidelic flexible pedestrian legform impactor (FlexPLI) has been developed from the year 2000 onwards and evaluated by a technical evaluation group (Flex-TEG) of UN-ECE GRSP. A recently established UN-ECE GRSP Informal Group on GTR9 Phase 2 is aiming at introducing the FlexPLI within world-wide regulations on pedestrian safety (Phase 2 of GTR No. 9 as well as the new UN regulation 127 on pedestrian safety) as a test tool for the assessment of lower extremity injuries in lateral vehicle-to-pedestrian accidents. Besides, the FlexPLI has already been introduced within JNCAP and is on the Euro NCAP roadmap for 2014. Despite of the biofidelic properties in the knee and tibia sections, several open issues related to the FlexPLI, like the estimation of the cost benefit, the feasibility of vehicle compliance with the threshold values, the robustness of the impactor and of the test results, the comparability between prototype and production level and the finalization of certification corridors still needed to be solved. Furthermore, discussions with stakeholders about a harmonized lower legform to bumper test area are still going on. This paper describes several studies carried out by the Federal Highway Research Institute (BASt) regarding the benefit due to the introduction of the FlexPLI within legislation for type approval, the robustness of test results, the establishment of new assembly certification corridors and a proposal for a harmonized legform to bumper test area. Furthermore, a report on vehicle tests that previously had been carried out with three prototype legforms and were now being repeated using legforms with serial production status, is given. Finally, the paper gives a status report on the ongoing simulation and testing activities with respect to the development and evaluation of an improved test procedure with upper body mass for assessing pedestrian femur injuries.
For the assessment of vehicle safety in frontal collisions, the crash compatibility between the colliding vehicles is crucial. Compatibility compromises both the self protection and the partner protection properties of vehicles. For the accident data analysis, the CCIS (GB) and GIDAS (DE) in-depth data bases were used. Selection criteria were frontal car accidents with car in compliance with ECE R94. For this study belted adult occupants in the front seats sustaining MAIS 2+ injuries were studied. Following this analysis FIMCAR concluded that the following compatibility issues are relevant: - Poor structural interaction (especially low overlap and over/underriding) - Compartment strength - Frontal force mismatch with lower priority than poor structural interaction In addition injuries arising from the acceleration loading of the occupant are present in a significant portion of frontal crashes. Based on the findings of the accident analysis the aims that shall be addressed by the proposed assessment approach were defined and priorities were allocated to them. The aims and priorities shall help to decide on suitable test procedures and appropriate metrics. In general it is anticipated that a full overlap and off-set test procedure is the most appropriate set of tests to assess a vehicle- frontal impact self and partner protection.
A flexible pedestrian legform impactor (FlexPLI) has been evaluated by a Technical Evaluation Group (Flex-TEG) of the Working Party on Passive Safety (GRSP) of the United Nations Economic Commission for Europe (UN-ECE). It will be implemented within phase 2 of the global technical regulation (GTR 9) as well as within a new ECE regulation on pedestrian safety as a test tool for the assessment of lower extremity injuries in lateral vehicle-to-pedestrian accidents (UN-ECE 2010-1, 2010-2 and 2010-3). Due to its biofidelic properties in the knee and tibia section, the FlexPLI is found to having an improved knee and tibia injury assessment ability when being compared to the current legislative test tool, the lower legform impactor developed by the Pedestrian Safety Working Group of the European Enhanced Vehicle-safety Committee (EEVC WG 17). However, due to a lack of biofidelity in terms of kinematics and loadings in the femur part of the FlexPLI, an appropriate assessment of femur injuries is still outstanding. The study described in this paper is aimed to close this gap. Impactor tests with the FlexPLI at different impact heights on three vehicle frontends with Sedan, SUV and FFV shape are performed and compared to tests with a modified FlexPLI with upper body mass. Full scale validation tests using a modified crash test dummy with attached FlexPLI that are carried out for the first time prove the more humanlike responses of the femur section with applied upper body mass. Apart from that they also show that the impact conditions described in the current technical provisions for tests with the FlexPLI don"t necessarily compensate the missing torso mass in terms of knee and tibia loadings either. Therefore it can be concluded that an applied upper body mass will contribute to a more biofidelic overall behavior of the legform and subsequently an improved injury assessment ability of all lower extremity injuries addressed by the FlexPLI. Nevertheless, the validity of the original as well as the modified legform for tests against vehicles with extraordinary high bumpers as well as flat front vehicles still needs to be evaluated in detail. A first clue is given by the application of an additional accelerometer to the legform.
It is well known that most accidents with pedestrians are caused by the driver not being alert or misinterpreting the situation. For that reason advanced forward looking safety systems have a high potential to improve safety for this group of vulnerable road users. Active pedestrian protection systems combine reduction of impact speed by driver warning and/or autonomous braking with deployment of protective devices shortly before the imminent impact. According to the Euro NCAP roadmap the Autonomous Emergency Braking system tests for Pedestrians Protection will be set in force from 2016 onwards. Various projects and organisations in Europe are developing performance tests and assessment procedures as accompanying measures to the Euro NCAP initiative. To provide synthesised input to Euro NCAP so-called Harmonisation Platforms (HP-) have been established. Their main goal is to foster exchange of information on key subjects, thereby generating a clear overview of similarities and differences on the approaches chosen and, on that basis, recommend on future test procedures. In this paper activities of the Harmonisation Platform 2 on the development of Test Equipment are presented. For the testing targets that mimic humans different sensing technologies are required. A first set of specifications for pedestrian targets and the propulsion systems as collected by Harmonisation Platform 2 are presented together with a first evaluation for a number of available tools.
For a number of EU regulatory acts Virtual Testing (VT) is already allowed for type approval (see Commission Regulation No. 371/2010 of 16 April 2010 amending the Framework Directive 2007/46/EC). However, only a very general procedure on how to apply VT for type approval is provided. Technical details for specific regulatory acts are not given yet. The main objective of the European project IMVITER (IMplementation of VIrtual TEsting in Safety Regulations) was to promote the implementation of VT in safety regulations. When proposing VT procedures the new regulation was taken into account, in particular, addressing open issues. Special attention was paid to pedestrian protection as pilot cases. A key aspect for VT implementation is to demonstrate that the employed simulation models are reliable. This paper describes how the Verification and Validation (V&V) method defined by the American Society of Mechanical Engineers was adapted for pedestrian protection VT based assessment. or the certification of headform impactors an extensive study was performed at two laboratories to assess the variability in calibration tests and equivalent results from a set of simulation models. Based on these results a methodology is defined for certification of headform impactor simulation models. A similar study was also performed with one vehicle in the type approval test setup. Its bonnet was highly instrumented and subjected to 45 impacts in five different positions at two laboratories in order to obtain an estimation of the variability in the physical tests. An equivalent study was performed using stochastic simulation with a metamodel fed with observed variability in impact conditions of physical headforms. An estimation of the test method uncertainty was obtained and used in the definition of a validation corridor for simulation models. Validation metric and criteria were defined in cooperation with the ISO TC22 SC10 and SC12 WG4 "Virtual Testing". A complete validation procedure including different test setups, physical magnitudes and evaluation criteria is provided. A detailed procedural flowchart is developed for VT implementation in EC Regulation No 78/2009 based on a so called "Hybrid VT" approach, which combines real hardware based head impact tests and simulations. This detailed flowchart is shown and explained within this paper. Another important point within the virtual testing based procedures is the documentation of relevant information resulting from the verification and validation process of the numerical models used. For this purpose report templates were developed within the project. The proposed procedure fixes minimum V&V requirements for numerical models to be confidently used within the type-approval process. It is not intended to be a thorough guide on how to build such reliable models. Different modeling methodologies are therefore possible, according to particular OEM know-how. These requirements respond to a balance amongst the type-approval stakeholders interests. A cost-benefit analysis, which was also performed within the IMVITER project, supports this approach, showing the conditions in which VT implementation is beneficial. Based on the experience gained in the project and the background of the experts involved an outlook is given as a roadmap of VT implementation, identifying the most important milestones to be reached along the way to a future vehicle type approval procedure supported by VT. The results presented in this paper show an important step addressing open questions and fostering the future acceptance of virtual testing in pedestrian protection type approval procedures.
Aktive Systeme der passiven Fahrzeugsicherheit zum Fußgängerschutz, sogenannte crash-aktive Fußgängerschutzsysteme, werden seit 2005 zur Erfüllung der gesetzlichen Anforderungen (siehe Verordnung (EG) Nr. 78/2009 und 631/2009) in Serienfahrzeugen eingesetzt. Diese crash-aktiven Fußgängerschutzsysteme stellen im Gegensatz zu den rein passiven Systemen nur eine instationäre Lösung dar. Da die innerhalb der gesetzlichen Anforderungen definierten Testverfahren zur Bewertung stationärer Systeme entwickelt wurden, können derzeit mögliche Risiken instationärer Systeme nicht berücksichtigt werden. Im Rahmen dieses Forschungsprojektes soll ein Bewertungsverfahren für diese crash-aktiven Fußgängerschutzsysteme entwickelt werden, welches das reale Potential dieser Systeme möglichst gut wiedergibt. Basis hierfür soll eine umfangreiche Untersuchung zusätzlicher Risiken bilden. Die hier untersuchten instationären Schutzmaßnahmen werden nur im Falle eines Fahrzeuganpralls gegen Fußgänger aktiviert, der daher zuverlässig erkannt werden muss. Für die hierfür eingesetzten, kontaktbasierten Sensorsysteme stellen Fußgänger mit geringen Lasteinträgen in die Fahrzeugfront eine große Herausforderung dar. Die Lasteinträge hängen von zahlreichen Faktoren, wie bspw. der Höhe der entsprechenden Krafteinleitungspfade sowie der Größe und dem Gewichts des Fußgängers, ab. Mit Hilfe von umfangreichen Anprallversuchen und -simulationen wird gezeigt, dass die bisher eingesetzten Prüfkörper nur zum Teil für die Erfüllung dieser Anforderungen geeignet sind. Für ein geeignetes Prüfverfahren müssen daher neue Prüfkörper entwickelt werden. Durch die Aktivierung der Schutzmaßnahme soll bei den crash-aktiven Systemen vor allem das Verletzungsrisiko beim Kopfanprall verringert werden. Hierfür wird häufig die hintere Motorhaubenkante angehoben, um zusätzlichen Deformationsfreiraum zur Verfügung zu stellen. Die Haubenanhebung kann jedoch auch in zusätzlichen Verletzungsrisiken resultieren, bspw. durch die exponierte hintere Haubenkante oder die Verringerung des Deformationsfreiraums in Folge des Oberkörperanpralls. Ein Ersatzprüfverfahren zur Bewertung der Haubendeformation mit Hilfe des Hüftimpaktors wird vorgestellt. Ein hybrides Testverfahren bestehend aus Simulation und Versuch eignet sich für eine objektive Bewertung dieser Systeme, wobei die entsprechenden Versuchsparameter mit Hilfe der vorherigen Simulation bestimmt werden können.
Die Erfahrungen zeigen, dass auch im Brücken- und Ingenieurbau an Bundesfernstraßen die Vorteile von hochfestem und selbstverdichtendem Beton genutzt werden können. Unter den Randbedingungen des Brückenbaus sind insbesondere Vollplattenquerschnitte mit beidseitigen Kragarmen, die ohne Versprung im Querschnitt an die Platte angegliedert sind, für die Ausführung mit hochfestem Beton geeignet. Mit dieser Bauweise wurden Spannweiten bis zu 40 m realisiert. Der Schlankheit der Querschnitte ist jedoch durch die zusätzlichen Kosten für Beton- und Spannstahlbewehrung eine wirtschaftliche Grenze gesetzt. Für die Ausführung von Brückenüberbauten an Bundesfernstraßen in Ortbetonbauweise ist selbstverdichtender Beton aufgrund der üblichen Abmessungen und der konstruktiven Durchbildung von Brücken nicht geeignet. Direkt befahrene Fahrbahntafeln aus hochfestem Ortbeton ohne zusätzliche Abdichtung sind für Brücken an Bundesfernstraßen mit den heute üblichen Verfahren nicht realisierbar. Die Gebrauchseigenschaften von Bauteilen aus hochfestem und/oder selbstverdichtendem Beton, wie z. B. Verformung und Dauerhaftigkeit, haben sich mindestens als vergleichbar mit normalfestem Beton dargestellt. Die Dauerhaftigkeit von hochfestem Beton stellt sich unter der Frost-Tausalz- und Wettereinwirkung an Bundesfernstraßen sogar besser dar, als für normalfesten Rüttelbeton oder selbstverdichtenden Beton. Chlorideindringwiderstand und Karbonatisierungswiderstand des hochfesten Betons sind höher. Selbst dann, wenn infolge von Oberflächenrissen das optische Erscheinungsbild eines Brückenpfeilers beeinträchtigt ist, sind Chlorideindring- und Karbonatisierungstiefe geringer als für normalfesten Beton unter den gleichen Einwirkungen. Die Erfahrungen haben gezeigt, dass bis einschließlich der Festigkeitsklasse C70/85 hochfeste Betone zielsicher hergestellt und eingebaut werden können. Mit abnehmender Festigkeitsklasse werden jedoch die typischen Schwierigkeiten bei der Ausführung der Bauteile geringer. Voraussetzung für die zielsichere Herstellung von hochfestem Beton und/oder selbstverdichtendem Beton ist jedoch die Umsetzung der zwischen Betonhersteller und bauausführendem Unternehmen vorab projektbezogenen, abgestimmten und qualitätssichernden Maßnahmen, die in QS-Plänen, z. B. für Betonherstellung, Transport und Baustelle, niedergelegt werden. Die notwendigen Maßnahmen zur Sicherstellung der geforderten Frischbetoneigenschaften, Hydratationswärmeentwicklung, Festigkeitsentwicklung, Einbauverfahren, Nachbehandlung und Festbetoneigenschaften gehen über das für normalfesten Rüttelbeton Bekannte hinaus. Der Aufwand für selbstverdichtenden Beton geht dabei noch über die für hochfesten Beton hinaus. Aus diesen Gründen wird die Begleitung solcher Baumaßnahmen durch nicht in das Baugeschehen involvierte, kompetente und erfahrene Betoningenieure weiterhin für erforderlich gehalten. Dies wird heute schon mit der Forderung einer Zustimmung im Einzelfall für Bauwerke und Bauteile aus hochfestem oder selbstverdichtendem Beton in den ZTV-ING in die Praxis umgesetzt. Mit zunehmender Verwendung hochfester und/oder selbstverdichtender Betone, auch außerhalb des Brückenbaus, werden die Erfahrung und die Sicherheit im Umgang mit diesen Betonen zunehmen, sodass das Instrument der Zustimmung im Einzelfall dann verzichtbar werden kann.
The objectives of the FIMCAR (Frontal Impact and Compatibility Assessment Research) project are to answer the remaining open questions identified in earlier projects (such as understanding of the advantages and disadvantages of force based metrics and barrier deformation based metrics, confirmation of specific compatibility issues such as structural interaction, investigation of force matching) and to finalise the frontal impact test procedures required to assess compatibility. Research strategies and priorities were based on earlier research programs and the FIMCAR accident data analysis. The identified real world safety issues were used to develop a list of compatibility characteristics which were then prioritised within the consortium. This list was the basis for evaluating the different test candidates. This analysis resulted in the combination of the Full Width Deformable Barrier test (FWDB) with compatibility metrics and the existing Offset Deformable Barrier (ODB) as described in UN-ECE Regulation 94 with additional cabin integrity requirement as being proposed as the FIMCAR assessment approach. The proposed frontal impact assessment approach addresses many of the issues identified by the FIMCAR consortium but not all frontal impact and compatibility issues could be addressed.
For the assessment of vehicle safety in frontal collisions compatibility (which consists of self and partner protection) between opponents is crucial. Although compatibility has been analysed worldwide for over 10 years, no final assessment approach has been defined to date. Taking into account the European Enhanced Vehicle safety Committee (EEVC) compatibility and the final report to the steering committee on frontal impact [Faerber 2007] and the FP5 VC-COMPAT[Edwards 2007] project activities, two test approaches were identified as the most promising candidates for the assessment of compatibility. Both are composed of an off-set and a full overlap test procedure. In addition another procedure (a test with a moving deformable barrier) is getting more attention in current research programmes. The overall objective of the FIMCAR project is to complete the development of the candidate test procedures and propose a set of test procedures suitable for regulatory application to assess and control a vehicle- frontal impact and compatibility crash safety. In addition an associated cost benefit analysis will be performed. In the FIMCAR Deliverable D 3.1 [Adolph 2013] the development and assessment of criteria and associated performance limits for the full width test procedure were reported. In this Deliverable D3.2 analyses of the test data (full width tests, car-to-car tests and component tests), further development and validation of the full width assessment protocol and development of the load cell and load cell wall specification are reported. The FIMCAR full-width assessment procedure consists of a 50 km/h test against the Full Width Deformable Barrier (FWDB). The Load Cell Wall behind the deformable element assesses whether or not important Energy Absorbing Structures are within the Common Interaction Zone as defined based on the US part 581 zone. The metric evaluates the row forces and requires that the forces directly above and below the centre line of the Common Interaction Zone exceed a minimum threshold. Analysis of the load spreading showed that metrics that rely on sum forces of rows and columns are within acceptable tolerances. Furthermore it was concluded that the Repeatability and Reproducibility of the FWDB test is acceptable. The FWDB test was shown to be capable to detect lower load paths that are beneficial in car-to-car impacts.
For the assessment of vehicle safety in frontal collisions compatibility (which consists of self and partner protection) between opponents is crucial. Although compatibility has been analysed worldwide for over 10 years, no final assessment approach has been defined to date. Taking into account the European Enhanced Vehicle safety Committee (EEVC) compatibility and frontal impact working group (WG15) and the FP5 VC-COMPAT project activities, two test approaches have been identified as the most promising candidates for the assessment of compatibility. Both are composed of an off-set and a full overlap test procedure. In addition another procedure (a test with a moving deformable barrier) is getting more attention in current research programmes. The overall objective of the FIMCAR project is to complete the development of the candidate test procedures and propose a set of test procedures suitable for regulatory application to assess and control a vehicle- frontal impact and compatibility crash safety. In addition an associated cost benefit analysis should be performed. The objectives of the work reported in this deliverable were to review existing full-width test procedures and their discussed compatibility metrics, to report recent activities and findings with respect to full-width assessment procedures and to assess test procedures and metrics. Starting with a review of previous work, candidate metrics and associated performance limits to assess a vehicle- structural interaction potential, in particular its structural alignment, have been developed for both the Full Width Deformable Barrier (FWDB) and Full Width Rigid Barrier (FWRB) tests. Initial work was performed to develop a concept to assess a vehicle- frontal force matching. However, based on the accident analyses performed within FIMCAR frontal force matching was not evaluated as a first priority and thus in line with FIMCAR strategy the focus was put on the development of metrics for the assessment of structural interaction which was evaluated as a first priority.
Cost benefit analysis
(2014)
Although the number of road accident casualties in Europe is falling the problem still remains substantial. In 2011 there were still over 30,000 road accident fatalities [EC 2012]. Approximately half of these were car occupants and about 60 percent of these occurred in frontal impacts. The next stage to improve a car- safety performance in frontal impacts is to improve its compatibility for car-to-car impacts and for collisions against objects and HGVs. Compatibility consists of improving both a car- self and partner protection in a manner such that there is good interaction with the collision partner and the impact energy is absorbed in the car- frontal structures in a controlled way which results in a reduction of injuries. Over the last ten years much research has been performed which has found that there are four main factors related to a car- compatibility [Edwards 2003, Edwards 2007]. These are structural interaction potential, frontal force matching, compartment strength and the compartment deceleration pulse and related restraint system performance. The objective of the FIMCAR FP7 EC-project was to develop an assessment approach suitable for regulatory application to control a car- frontal impact and compatibility crash performance and perform an associated cost benefit analysis for its implementation.
The objective of this deliverable is to describe the expected influence of the candidate test procedures developed in FIMCAR for frontal impact on other impact types. The other impact types of primary interest are front-to-side impacts, collisions with road restraint systems (e.g. guardrails), and heavy goods vehicle impacts. These collision types were chosen as they involve structures that can be adapted to improve safety. Collisions with vulnerable road users (VRU) were not explicitly investigated in FIMCAR. It is expected that the vehicle structures of interest in FIMCAR can be designed into a VRU friendly shell. Information used for this deliverable comes from simulations and car-to-car crash tests conducted in FIMCAR or review of previous research. Three test configurations (full width, offset, and moving deformable barriers) were the input to the FIMCAR selection process. There are three different types of offset tests and two different full width tests. During the project test procedures could be divided into three groups that provide different influences or outcomes on vehicle designs: 1. The ODB barrier provides a method to assess part of the vehicles energy absorption capabilities and compartment test in one test. 2. The FWRB and FWDB have similar capabilities to control structural alignment, further assess energy absorption capabilities, and promote the improvements in the occupant restraint system for high deceleration impacts. 3. The PDB and MPDB can be used to promote better load spreading in the vehicle structures, in addition to assessing energy absorption and occupant compartment strength in an offset configuration. The consortium selected the ODB and FWDB as the two best candidates for short term application in international rulemaking. The review of how all candidates would affect vehicle performance in other impacts (beside front-to-front vehicle or frontal impacts with fixed obstacles) however is reported in this deliverable to support the benefit analysis reported in FIMCAR. The grouping presented above is used to discuss all five test candidates using similarities between certain tests and thereby simplify the discussion.
Accident analysis
(2014)
For the assessment of vehicle safety in frontal collisions compatibility (which consists of self and partner protection) between opponents is crucial. Although compatibility has been analysed worldwide for years, no final assessment approach has been defined to date. Taking into account the European Enhanced Vehicle safety Committee (EEVC) compatibility and frontal impact working group (WG15) and the EC funded FP5 VC-COMPAT project activities, two test approaches have been identified as the most promising candidates for the assessment of compatibility. Both are composed of an off-set and a full overlap test procedure. In addition another procedure (a test with a moving deformable barrier) is getting more attention in today- research programmes. The overall objective of the FIMCAR project is to complete the development of the candidate test procedures and propose a set of test procedures suitable for regulatory application to assess and control a vehicle- frontal impact and compatibility crash safety. In addition an associated cost benefit analysis should be performed. The specific objectives of the work reported in this deliverable were: - Determine if previously identified compatibility issues are still relevant in current vehicle fleet: Structural interaction, Frontal force matching, Compartment strength in particular for light cars. - Determine nature of injuries and injury mechanisms: Body regions injured o Injury mechanism: Contact with intrusion, Contact, Deceleration / restraint induced. The main data sources for this report were the CCIS and Stats 19 databases from Great Britain and the GIDAS database from Germany. The different sampling and reporting schemes for the detailed databases (CCIS & GIDAS) sometimes do not allow for direct comparisons of the results. However the databases are complementary " CCIS captures more severe collisions highlighting structure and injury issues while GIDAS provides detailed data for a broader range of crash severities. The following results represent the critical points for further development of test procedures in FIMCAR.
The off-set assessment procedure potentially contributes to the FIMCAR objectives to maintain the compartment strength and to assess load spreading in frontal collisions. Furthermore it provides the opportunity to assess the restraint system performance with different pulses if combined with a full-width assessment procedure in the frontal assessment approach. Originally it was expected that the PDB assessment procedure would be selected for the FIMCAR assessment approach. However, it was not possible to deliver a compatibility metric in time so that the current off-set procedure (ODB as used in UNECE R94) with some minor modifications was proposed for the FIMCAR Assessment Approach. Nevertheless the potential to assess load spreading, which appears not to be possible with any other assessed frontal impact assessment procedure was considered to be still high. Therefore the development work for the PDB assessment procedure did not stop with the decision not to select the PDB procedure. As a result of the decisions to use the current ODB and to further develop the PDB procedure, both are covered within this deliverable. The deliverable describes the off-set test procedure that will be recommended by FIMCAR consortium, this corresponds to the ODB test as it is specified in UN-ECE Regulation 94 (R94), i.e. EEVC deformable element with 40% overlap at a test speed of 56 km/h. In addition to the current R94 requirements, FIMCAR will recommend to introduce some structural requirements which will guarantee sufficiently strong occupant compartments by enforcing the stability of the forward occupant cell. With respect to the PDB assessment procedure a new metric, Digital Derivative in Y direction - DDY, was developed, described, analysed, and compared with other metrics. The DDY metric analyses the deformation gradients laterally across the PDB face. The more even the deformation, the lower the DDY values and the better the metric- result. In order analyse the different metrics, analysis of the existing PDB test results and the results of the performed simulation studies was performed. In addition, an assessment of artificial deformation profiles with the metrics took place. This analysis shows that there are still issues with the DDY metric but it appears that it is possible to solve them with future optimisations. For example the current metric assesses only the area within 60% of the half vehicle width. For vehicles that have the longitudinals further outboard, the metric is not effective. In addition to the metric development, practical issues of the PDB tests such as the definition of a scan procedure for the analysis of the deformation pattern including the validation of the scanning procedure by the analysis of 3 different scans at different locations of the same barrier were addressed. Furthermore the repeatability and reproducibility of the PDB was analysed. The barrier deformation readings seem to be sensitive with respect to the impact accuracy. In total, the deliverable is meant to define the FIMCAR off-set assessment procedure and to be a starting point for further development of the PDB assessment procedure.
Die Bewertung von Projekten im Rahmen von Kosten-Nutzen-Analysen erfordert quantitative Input-Informationen zu den Kosten von Verkehrsunfällen. In der deutschen Bewertungspraxis werden bislang ausschließlich die mittel- und unmittelbar anfallenden monetären Folgen von Verkehrsunfällen quantitativ berücksichtigt, während die immateriellen Folgen wie Schmerz, Leid, Verlust an Lebensqualität bzw. die Zahlungsbereitschaft der Bevölkerung zur Verringerung/Vermeidung dieser Folgen unberücksichtigt bleiben. Die hier vorgelegte Vorstudie fasst den heutigen Stand der Forschung zur Quantifizierung von Zahlungsbereitschaften für die Verkehrssicherheit durch eine umfassende und systematische Übersicht der wissenschaftlichen Literatur zusammen. Die fünf Verfahren hedonische Preisbildung, kontingente Bewertungsmethode, Risiko-Risiko-Analyse, Standardlotteriemethode und Stated-Choice (SC) werden hinsichtlich ihrer theoretischen Fundierung, der verwendeten methodischen Ansätze (Art der Befragung, Modellierung etc.) und den Anwendungserfahrungen untersucht. Unter den verfügbaren Verfahren stellen die SC-Methoden den heutigen State-of-the-Art in der Forschung zur Ermittlung der Zahlungsbereitschaft der Bevölkerung für nicht marktfähige Güter dar. Allerdings liegen die meisten Anwendungserfahrungen mit SC-Ansätzen bislang für die Bewertung der Reisezeit und der Zuverlässigkeit vor. Zusammenfassend ist festzustellen, dass im Laufe der letzten Jahre eine Lücke zwischen dem Stand der Forschung (SC-Methoden) und dem Stand der Praxis (andere Methoden) entstanden ist, die mit Anwendungserfahrungen gefüllt werden sollte. Insbesondere für Deutschland liegt ein wesentlicher Forschungsbedarf vor. Basierend auf diesem Überblick werden daher Vorschläge für die weitere Forschung entwickelt.