Das 11. Kolloquium Straßenbetriebsdienst der Forschungsgesellschaft für Straßen- und Verkehrswesen fand nach 10 Veranstaltungen in der Technischen Universität Darmstadt erstmals in der Universität (TH) Karlsruhe statt. Die Veranstaltung hatte erneut über 250 Zuhörer aus dem In- und Ausland nach Karlsruhe geführt. Ihnen wurde ein umfangreiches Vortragsprogramm mit insgesamt 17 Vorträgen angeboten, das alle wesentlichen Aspekte des Straßenbetriebsdienstes umfasste. Sie wurden in den Themenblöcken "Aktuelle Themen im Straßenbetriebsdienst", "Ergebnisse laufender und abgeschlossener Forschungsvorhaben", "Techniken und Strategien im Winterdienst und Umweltaspekte des Straßenbetriebsdienstes" präsentiert. Zum Rahmenprogramm der Veranstaltung gehörten eine Begleitausstellung, eine Werksbesichtigung und praktische Gerätevorführungen.
Vor etwa 70 Teilnehmern aus Straßenbauverwaltungen, Ingenieurbüros und Herstellerfirmen wurde die Problematik des Lärms im Zusammenhang mit Fahrbahnübergängen (FÜ) als Verbindungsglied zur Überbrückung des Spalts zwischen Brücke und anschließender Straße dargestellt und erörtert. Beteiligt waren neben den Experten des Brückenbaus auch die zuständigen Fachleute aus dem Bereich Immissionsschutz und Fahrzeug/Fahrbahn der BASt. Von den Vortragenden wurden die verschiedenen Gesichtspunkte der Lärmentstehung, die bereits angestellten Versuche zur Lärmminderung und die weiteren Möglichkeiten zur Reduzierung des Lärms dargestellt. Das Problem ist noch nicht gelöst. Der Lamellenübergang stellt den heutigen Stand der Technik dar. Man muss in überschaubarer Zeit zu Verbesserungen gelangen.
Es wird über die Fachvorträge des Kolloquiums "Straßenbetriebsdienst" informiert, das zum neunten Mal gemeinsam von der Forschungsgesellschaft für Straßen- und Verkehrswesen und dem Fachgebiet Straßenwesen der Technischen Universität Darmstadt im Oktober 1999 veranstaltet wurde. In kurzen Zusammenfassungen wird über die Vorträge der drei Themenblöcke "Aktuelle Probleme des Straßenbetriebsdienstes", "Umweltaspekte der betrieblichen Straßenunterhaltung" und "Techniken und Strategien für einen wirksamen Straßenwinterdienst" berichtet.
Die Bundesanstalt für Straßenwesen (BASt) führte gemeinsam mit dem Laboratoire Central des Ponts et Chaussées (LCPC) am 7. und 8.12.2000 in Straßburg eine Fachtagung zum Thema "Straßenverkehrslärm" durch. Im Laufe des Workshops wurden Projekte aus nationalen Forschungsprogrammen vorgestellt, Forschungsergebnisse ausgetauscht sowie Möglichkeiten der Kooperation von BASt und LCPC im Bereich Straßenverkehrslärm auf bilateraler und europäischer Ebene erörtert. Der Workshop beinhaltete die beiden Schwerpunktbereiche Lärmemissionen des Straßenverkehrslärms und Schallausbreitung im Straßenverkehr.
Die Arbeitsgruppe Erd- und Grundbau der Forschungsgesellschaft für Straßen- und Verkehrswesen (FGSV) hat am 12. und 13. März 2003 ihre 10. Erd- und Grundbautagung in Stade ausgerichtet. Im Zusammenhang damit wurde eine Exkursion zu den umfangreichen Erdbauarbeiten auf schwierigsten Untergrundverhältnissen im Zuge der Baumaßnahme der BAB A26 zwischen Stade und Horneburg realisiert. Die Tagung wurde von circa 300 Teilnehmern besucht, darunter 13 Fachkollegen aus den europäischen Nachbarländern. In insgesamt vier Blöcken der Vortrags- und Diskussionsveranstaltung wurde über neue Technische Regelwerke, Erfahrungen aus der Baupraxis sowie über aktuelle Forschungsergebnisse berichtet und diskutiert.
Die Arbeitsgruppe Erd- und Grundbau der Forschungsgesellschaft für Straßen- und Verkehrswesen (FGSV) hat am 12. und 13. März 2003 ihre 10. Erd- und Grundbautagung in Stade ausgerichtet. Im Zusammenhang damit wurde eine Exkursion zu den umfangreichen Erdbauarbeiten auf schwierigsten Untergrundverhältnissen im Zuge der Baumaßnahme der BAB A 26 zwischen Stade und Horneburg realisiert. Die Tagung wurde von circa 300 Teilnehmern besucht, darunter 13 Fachkollegen aus den europäischen Nachbarländern. In insgesamt vier Blöcken der Vortrags- und Diskussionsveranstaltung wurde über neue Technische Regelwerke, Erfahrungen aus der Baupraxis sowie über aktuelle Forschungsergebnisse berichtet und diskutiert.
Das 10. Kolloquium "Straßenbetriebsdienst", das in zweijährigem Turnus von der Forschungsgesellschaft für Straßen- und Verkehrswesen in Zusammenarbeit mit dem Fachgebiet Straßenwesen der Technischen Universität Darmstadt veranstaltet wird, fand am 17. und 18. Oktober 2001 in Darmstadt statt. Über 250 Teilnehmer waren wiederum der Einladung gefolgt. Auf vielfachen Wunsch wurde erstmals eine kleine Begleitausstellung organisiert, die Highlights, nicht aber ein umfassendes Lieferprogramm zeigen sollte. Die insgesamt 17 Vorträge der Veranstaltung wurden in drei Themenblöcken präsentiert: Aktuelle Probleme des Straßenbetriebsdienstes, Techniken und Strategien für einen wirksamen Straßenwinterdienst und Umweltaspekte der betrieblichen Straßenunterhaltung. Die Vorträge haben auf breiter Linie erneut unter Beweis gestellt, dass auf allen Ebenen der Verwaltung, der Industrie und der wissenschaftlichen Forschung vielfältige Anstrengungen unternommen werden, das bereits erreichte, auch im internationalen Vergleich hohe Niveau des Straßenunterhaltungs- und Winterdienstes weiter zu verbessern. Die eingeleiteten Maßnahmen bedürfen jedoch der konsequenten Weiterverfolgung. Der abschließende Teil 2 enthält die Übersicht über die Themenblöcke Techniken und Strategien für einen wirksamen Straßenwinterdienst (3.) und Umweltaspekte der betrieblichen Straßenunterhaltung (4.) sowie ein Resümee (5.).
Betonfahrbahndecken werden seit vielen Jahrzehnten mit guten Gebrauchseigenschaften und langer Nutzungsdauer hergestellt. Um den wachsenden Anforderungen hinsichtlich der Verkehrssicherheit, der Umweltverträglichkeit und der Wirtschaftlichkeit gerecht werden zu können, ist eine stetige Weiterentwicklung erforderlich. Im September 2006 fand in Brüssel das 10. Internationale Betonstraßen Symposium statt. Im Rahmen umfangreicher Forschungsarbeiten und Studien auf Erprobungsstrecken wurden auf internationaler Ebene Untersuchungen zur Dauerhaftigkeit von Betonfahrbahnen durchgeführt. Der vorliegende Bericht stellt die Zusammenfassung von insgesamt 12 Fachbeiträgen aus 9 Nationen zum Themenblock "Kosteneffiziente und langlebige Straßen" dar.
Traditionsgemäß berichtet der Arbeitsgruppenleiter anlässlich der Erd- und Grundbautagung über die Tätigkeiten der Arbeitsausschüsse und Arbeitskreise zwischen den Tagungen. Die wesentlichen Aufgaben der Gremien bestehen in der Fortschreibung der Regelwerke auf der Basis der initiierten und betreuten Forschungsprojekte. Diese Aufgaben sind Schwerpunkte des Berichts. Außerdem wird auf die bisherigen Ergebnisse bei der Erprobung der Zusammenarbeit von Eisenbahnbundesamt, Deutsche Bahn AG (DB AG) und Forschungsgesellschaft für Straßen- und Verkehrswesen (FGSV) eingegangen. In einem Überblick wird die seit 1. Januar 2007 gültige Struktur der Arbeitsgruppe "Erd- und Grundbau" mit ihren Arbeitsausschüssen und Arbeitskreisen vorgestellt.
In der Öffentlichkeit wird allgemein angenommen, dass Massenunfälle aufgrund schlechter Straßen- und Sichtverhältnisse passieren, vor allem bei Nebel. Statistisch gesehen ereignet sich das Ineinanderfahren zahlreicher Fahrzeuge aber wesentlich häufiger bei guter Sicht. Was sind die Gründe? Dieser Frage wurde auf einem Presseseminar des Bundesministeriums für Verkehr am 14. und 15. September 1994 in Kassel nachgegangen. Dabei wurde das Phänomen des Massenunfalls aus den verschiedensten Blickwinkeln betrachtet: Was ist ein Massenunfall? Wie arbeitet die Polizei? Welche Probleme haben Rettungsdienste und Notfallmediziner? Was geht im Kopf der beteiligten Autofahrer vor sich? Gibt es technische Hilfen und wirksame Lernsysteme?
T. DÜNCHHEIM erörtert in seinem Einführungsvortrag zu "Die Stellung der Gemeinden im Straßenrecht" die kommunalen Gestaltungsspielräume hinsichtlich ihres Satzungsrechts, das sich auf -§ 19 StrWG NRW stützen lässt. Er schildert die Auswirkungen dieser Gestaltung auf das Straßen- und Straßenverkehrsrecht, die letztlich Ausfluss der gemeindlichen Selbstverwaltungsgarantie sind. Dabei problematisiert er die Abgrenzung zwischen straßenrechtlichem Gemeingebrauch und Sondernutzung sowie die Bedeutung der rechtlichen Ausgestaltung des Straßen- und Straßenverkehrsrechts. Hierbei wird die Anwendung des -§ 45 StVO durch die Gemeinden einer kritischen Analyse unterzogen. A. NETTER schildert in seinem Beitrag "Aktuelle Rechtsfragen der Ortsdurchfahrten" die Gremienstruktur im Straßenwesen und den Einfluss des Europarechts, des Bundes- und Landesstraßenrechts sowie den Ortsdurchfahrtenrichtlinien auf das Straßenwesen. Er stellt dabei die Folgen der Aufhebung der Radwegbenutzungspflicht sowie die aus der Straßenbaulast folgende Entwässerungsverpflichtung der Straßenbaulastträger und ihre Umsetzung in den Gemeinden dar. U. WEGNER berichtet in ihrem Beitrag "Aktuelle Entwicklungen des Verbandsklagerechts" über die Auswirkungen europäischer Richtlinien auf das Umweltrecht. In diesem Zusammenhang wird eine wegweisende Entscheidung des BVerwG erörtert, welche die direkte Anwendung des Art. 9 Abs. 3 AK zum Gegenstand hat. Trotz der Einführung einer bundesrechtlichen Verbandsklage in -§ 64 BNatSchG sei das Problem der Wahrung von Allgemeininteressen nicht gelöst, da diese Norm die Interessen des Umweltschutzes nicht hinreichend zu schützen vermöge. Der Beitrag "Inanspruchnahme öffentlicher Wege durch TK-Unternehmen" von U. STELKENS, stellt eine differenzierte Auseinandersetzung mit dem TKG-Wegerecht dar. Er konstatiert, dass die Bestimmungen des TKG im Wesentlichen auf den Normen des Telegraphenwegegesetz (TWG) basieren. Daher bestehen Spannungsverhältnisse und Reibungsflächen zwischen den verschiedenen Abschnitten des TKG, da das TKG und das TWG unterschiedliche Ziele verfolgen. Beispielsweise seien die -§ 77a bis -§ 77e TKG nicht auf die -§ 68 bis -§ 77 TKG abgestimmt worden. Der abschließende Beitrag "Fachplanerische Auswirkungen des Umweltschadensgesetzes" von M. PETERSEN widmet sich der Frage, ob und welche Auswirkungen das Umweltschadensgesetz auf das Fachplanungsrecht hat. Zunächst wird allgemein herausgearbeitet, dass das Umweltschadensgesetz nicht Schadensersatz- oder Ausgleichsleistungen eines geschädigten Dritten bezweckt; vielmehr sollen Umweltschäden vermieden und die Wiederherstellung geschädigter Umweltgüter erreicht werden. Die Frage, ob und inwieweit das Umweltschadensgesetz Auswirkungen auf das Fachplanungsrecht hat, hängt davon ab, ob die Haftungstatbestände des -§ 3 Abs. 1 USchadG einschlägig sind.
The frontal crash is still an important contributor to deaths and serious injured resulting from road accidents in Europe. As the Hybrid-III dummy used in crash tests is over two decades old, the European Enhanced Vehicle-safety Committee is studying the potential for a new test device. Key is the availability of a well-defined set of requirements that identifies the minimum level of biofidelity required for an advanced frontal dummy. In this paper, a complete set of frontal impact biofidelity requirements, consisting of references , description of test conditions and corridors, is presented.
The Swedish National Road Administration (SNRA), the Japanese Automobile Research Institute (JARI) and the Federal Highway Research Institute (BASt) are co-operating in the International Harmonized Research Activities on Intelligent Transportation Systems (IHRA-ITS). Under this umbrella a joint study was conducted. The overall objective of this study was to contribute to the definition and validation of a "battery of tools" which enables a prediction and an assessment of changes in driver workload due to the use of in-vehicle information systems (IVIS) while driving. In this sense \"validation\" means to produce empirical evidence from which it can be concluded that these methods reliably discriminate between IVIS which differ in terms of relevant features of the HMI-design. Additionally these methods should also be sensitive to the task demands imposed on the driver by the traffic situation and their interactions with HMI-design. To achieve these goals experimental validation studies (on-road and in the simulator) were performed in Sweden, Germany and Japan. As a common element these studies focused on the secondary task methodology as an approach to the study of driver workload. In a joint German-Swedish on-road study the Peripheral Detection Task (PDT) was assessed with respect to its sensitivity to the complexity of traffic situations and effects of different types of navigation systems. Results show that the PDT performance of both the German and the Swedish subjects reflects the task demands of the traffic situations better than those of the IVIS. However, alternative explanations are possible which will be examined by further analyses. Results of this study are supplemented by the Japanese study where informational demands induced by various traffic situations were analysed by using a simple arithmetic task as a secondary task. Results of this study show that relatively large task demands can be expected even from simple traffic situations.
The objective was to develop and validate a crash trolley (reference vehicle) equipped with a compartment and a full restraint system for driver and front seat passenger which can be used in full scale crash testing. Furthermore, the crash trolley should have a suspension to show rotation and nick effects similar to real vehicles. Within the development phase the reference vehicle was build based on a European family car. Special attention was needed to provide appropriate strength to the trolley and its suspension. The reference vehicle is equipped with a restraint system consisting of airbags, pedals, seats, dashboard, and windscreen. On the front of the vehicle different crash barriers can be installed to provide miscellaneous deceleration pulses. For the validation phase a series of low and high speed crash tests with HIII dummies were conducted and compared with full scale tests. For the comparison deceleration pulse, dummy numbers and vehicle movement were analyzed. Validation tests with velocities up to 60 km/h showed promising results. The compartment and the suspension systems stayed stable. Rotation effects were comparable with full scale car crash tests. The airbags and seat belt system worked reasonable. The acceleration pulse compared to an Euro NCAP test had a similar characteristic but was in general slightly lower. After the successful validation the reference vehicle is already in use in different studies in the field of vehicle safety research at BASt.
Topics of the status report are: Road accidents in Germany " Socio-economic costs due to road traffic accidents in Germany " Vehicle population and road performance " Electromobility " Alternative power train technologies: market penetration and consequences. The following research subjects are presented: Safety of electric vehicles " Driving dynamics of electric propelled vehicles " New requirements for the periodic technical inspection of electric and hybrid vehicles " Forward looking safety systems " Periodic roadworthiness tests " Cooperative systems: integration of existing systems " Safety related traffic information " Urban space: User oriented assistance systems and network management " Automated driving " Study on camera-monitor-systems " Freight transport " BioRID TEG, dummy harmonization " Frontal impact and compatibility " Child safety " FlexPLI " GIDAS: a blueprint for worldwide in-depth road accident investigations " Druid: Driving under the influence of drugs, alcohol and medicines " Smoke and toxicity in bus fires.
Proposal for a test procedure of assistance systems regarding preventive pedestrian protection
(2011)
This paper is showing a proposal for a test procedure regarding preventive pedestrian protection based on accident analysis. Over the past years pedestrian protection has become an increasing importance also during the development phase of new vehicles. After a phase of focusing on secondary safety, there are current activities to detect a possible collision by assistance systems. Such systems have the task to inform the driver and/or automatically activate the brakes. How practical is such a system? In which kind of traffic situations will it work? How is it possible to check the effectiveness of such a system? To test the effectiveness, currently there are no generally approved identifiable procedures. It is reasonable that such a test should be based on real accidents. The test procedure should be designed to test all systems, independent of the system- working principle. The vFSS group (advanced Forward-looking Safety Systems) was founded to develop a proposal for a technology independent test procedure, which reflects the real accident situation. This contribution is showing the results of vFSS. The developed test procedure focuses on accidents between passenger cars and pedestrians. The results are based on analysis results of in-depth databases of GIDAS, German insurers and DEKRA and added by analysis of national and international statistics. The in-depth analysis includes many pre-crash situations with several influencing factors. The factors are e. g. speed of the car, speed of the pedestrian, moving direction and a possible obscuration of the pedestrian by an object. The results comprise also the different situations of adults and children. Furthermore, they include details regarding influence of the lighting conditions (daylight or night) especially with respect to the accident consequences. In fact, more accidents happen at daylight, but fatal accidents are more often at night. A clustering of parameter combinations was found which represents typical accident scenarios. There are six typical accident scenarios which were merged in four test scenarios. The test scenarios are varying the starting position of the pedestrian, the pedestrian size (adult or child) and the speed of the pedestrian, whereas the speed of the car will not be varied. To ensure the independency from used sensing technologies it is necessary to use a suitable dummy. For example, if sensors are based on infrared, the dummy should emit the temperature of a human being. The test procedure will identify the collision speed as the key parameter for assessing the effectiveness of the tested system. The collision speed is defined as the reduction between initial test speed of the car and impact speed. The assessment of the speed reduction value regarding the safety benefit, however, will be part of a separate procedure.
New vehicle types are extensively tested to check almost all factors that influence ride and handling. With reference to the Association of German Car Tuners" (VDAT e.V.) valuations, approximately 10% of all cars in Germany are being modified by their owners. 28 % of those modifications" sales are divergent wheel-tire combinations, 13 % are tuning measures on the chassis suspension or wheel spacers. In almost all cases the singular modifications present a general permission for specific vehicles they have been tested in. Combined tuning measures, however, are often checked by just one inspector, following a procedure of mostly subjective assessment criteria. Today, critical attributes are only being observed, in case a vehicle is involved in an accident and the modifications are identified as crash causal factors or as a cofactor on the development of a crash. For the first time, a field study allows a survey of safety affecting chassis modifications. The test layout has to comply with some basic conditions. Different vehicle concepts with a wide margin of modifications are required to get a high transferability of the results. A total amount of more than 150 tested vehicles serves the same purpose. The tests are limited concerning the installation time of measurement techniques and the requirement that no damage, defilement or immoderate wear of the vehicles are accepted by their owners. Due to such factors as well as the driver Ìs acceptance, the vehicles are controlled by its owners instead of robots or test drivers. For keeping down the driver- influence, the lane has narrow boundaries and the driver has to drive in strictly adherence to the given instructions. After gathering all modifications, as well as static and kinematic parameters like the toe and camber angle, dynamic testing of predominantly lateral dynamics is conducted. Besides standardized tests like the ISO 3888-2 (Obstacle Avoidance) or the ISO 14512 (Braking on Surfaces with Split Coefficient of Friction), to test the influence of modified kingpin offsets caused by wheel spacers, some deviant tests are conducted. Those are required due to the demand of objective test results for road tests with vertical induced stimulation of the chassis suspension. Hence, new tests on corner braking with and without vertical stimulation have been developed. The interpretation of data includes thresholds, e.g. the maximum entrance velocity without hitting cones, on the one hand, and the analysis of characteristics of data concerning time and frequency range, "1-second values" and peak response times on the other hand. Besides the thresholds as indicators for the achievable velocities, which are mainly affected by friction coefficients, the vehicle reaction in the course of time characterizes the vehicle reaction in the threshold range and consequently the operational demands on the driver. The field study has started and promises the first long-range analysis of chassis modifications. The results offer a basis for hypothesis and resultant further test layouts for oncoming studies of the identified critical tuning measures.
Topics of this report are: Road accidents in Germany - Socio-economic costs due to road traffic accidents - Vehicle population and road performance " Automotive IT " Electromobility. The following research subjects are presented: Safety of electric vehicles - Forward looking safety systems - Cooperative systems - Safety related traffic information - Freight transport: Action plan freight transport and trial with longer trucks - Lane departure warning systems and Advanced emergency braking systems (AEBS) for heavy duty vehicles - Dummy harmonization " Compatibility - Child safety - Virtual testing - Driving under the influence of drugs, alcohol and medicines - Fire safety of buses - Milled shoulder rumble strips - Conspicuity of powered-two-wheelers - Automatically dipped high beam and rear view mirrors.
For the assessment of vehicle safety in frontal collisions, the crash compatibility between the colliding vehicles is crucial. Compatibility compromises both the self protection and the partner protection properties of vehicles. For the accident data analysis, the CCIS (GB) and GIDAS (DE) in-depth data bases were used. Selection criteria were frontal car accidents with car in compliance with ECE R94. For this study belted adult occupants in the front seats sustaining MAIS 2+ injuries were studied. Following this analysis FIMCAR concluded that the following compatibility issues are relevant: - Poor structural interaction (especially low overlap and over/underriding) - Compartment strength - Frontal force mismatch with lower priority than poor structural interaction In addition injuries arising from the acceleration loading of the occupant are present in a significant portion of frontal crashes. Based on the findings of the accident analysis the aims that shall be addressed by the proposed assessment approach were defined and priorities were allocated to them. The aims and priorities shall help to decide on suitable test procedures and appropriate metrics. In general it is anticipated that a full overlap and off-set test procedure is the most appropriate set of tests to assess a vehicle- frontal impact self and partner protection.