Sonstige
Filtern
Erscheinungsjahr
Dokumenttyp
- Konferenzveröffentlichung (64)
- Buch (Monographie) (26)
- Bericht (1)
- Arbeitspapier (1)
Schlagworte
- Analyse (math) (92) (entfernen)
Institut
Interdisciplinary accident research and research projects of AARU Audi Accident Research Unit
(2017)
AARU (Audi Accident Research Unit) is an interdisciplinary research project of the University Hospital Regensburg in cooperation with AUDI AG. Specific objective is to comprehend the respective accident scenario and retrieve generally applicable findings as to technical, medical and psychological processes. In order to prevent traffic accidents and to alleviate vehicle accident consequences, postulates of general traffic safety, human-machine interaction, technical design and function of new vehicles and occupant as well as third party protection shall be inferred from these findings. Specifically, each accident with new Audi, Lamborghini and Ducati vehicles involved is analyzed interdisciplinary, discussed in a case meeting and anonymously documented with more than 2,000 parameters. The database is continually used for solving safety relevant issues. Parallel to accident analysis, research projects are performed in the fields medicine, psychology and engineering in order to gain comprehensive insight and identify potential additional areas of activity of accident research.
Ziel des Forschungsprojektes war die Erarbeitung eines webbasierten Verfahrens für die Verkehrssicherheitsarbeit, welches dem Anwender bei der Bearbeitung von Unfallhäufungen potenziell geeignete Maßnahmen in Abhängigkeit der örtlichen Randbedingungen vorschlägt, deren Sicherheitswirkung abschätzt sowie die Möglichkeit bietet, die Maßnahmenwirkung in einer retroperspektiven Betrachtung zu evaluieren. Dabei stellt das Verfahren eine Weiterentwicklung und Ergänzung des Merkblatts "Auswertung von Straßenverkehrsunfällen, Teil 2: Maßnahmen gegen Unfallhäufungen" (FGSV 2002) dar. Grundgerüst der Maßnahmensammlung bilden neben dem Merkblatt der FGSV (2002) aktuelle Erkenntnisse verschiedener Forschungsarbeiten (SPAHN 2012, GERLACH et al. 2009, MAIER et al. 2010, u. w.) zu Maßnahmen gegen Unfallhäufungen, die einer Prüfung und Kategorisierung unterzogen wurden. Der Hauptbestandteil des webbasierten Verfahrens umfasst Schritte zur Unfallanalyse, Maßnahmenfindung und Wirksamkeitsprüfung nach dem "Merkblatt zur örtlichen Unfalluntersuchung in Unfallkommissionen " M UKo" (FGSV 2012). Mit der Übermittlung der Unfallinformationen zu Unfallhäufungen aus den EDV-Systemen der Unfalldatenhaltung in das Programm ist eine spezifische Bearbeitung von Unfallhäufungen möglich. Darüber hinaus wird die Möglichkeit von Rangfolgebildungen zur zielgerichteten Priorisierung von Arbeitsprogrammen angeboten. Die Vorschläge geeigneter Maßnahmen zur Bekämpfung einer Unfallhäufung stuetzen sich im Verfahren auf die Analyse typischer Konfliktsituationen, welche aus den Unfalldatensätzen bestimmt werden. Zur Überprüfung der Angemessenheit und Durchsetzbarkeit von Maßnahmen (-paketen) steht dem Anwender eine Abschätzung des Nutzen-Kosten-Verhältnisses auf Basis des fallbezogenen Unfallgeschehens zur Verfügung. Die kontinuierliche Anwendung des Verfahrens erlaubt dem Nutzer die Dokumentation der Arbeitsschritte. Diese beinhaltet über die Umsetzungskontrolle hinaus wiederum eine fallbezogene Wirksamkeitsprüfung (Evaluierung) der realisierten Maßnahmen. Die stetige Aktualisierung der Maßnahmen und ihrer Kenngrößen (u. a. Wirkungsgrad, Kosten) stellt einen wesentlichen Bestandteil des webbasierten Verfahrens dar, um einen zielorientierten Beitrag zur Bekämpfung von Unfallhäufungen zu leisten.
Ziel des Forschungsvorhabens war es zu untersuchen, ob in verschiedenen Prüfstellen mit dem Walzsektor-Verdichtungsgerät hergestellte Asphalt-Probeplatten gleiche Eigenschaften aufweisen, damit z.B. verträgliche Ergebnisse für Performance-Prüfungen ermittelt werden können. Dazu wurde in 12 Prüfstellen ein Verfahrens-Audit durchgeführt, um eine einheitliche Vorgehensweise bei der Herstellung dieser Platten zu gewährleisten. Anschließend wurden aus verschiedenen Asphaltvarianten WSV-Platten hergestellt und an daraus gewonnenen Probekörpern umfangreiche Performance-Prüfungen durchgeführt. Die ermittelten Ergebnisse zeigen, dass es möglich ist WSV-Platten mit verträglicher Raumdichte in unterschiedlichen WSV-Geräten sowie verschiedenen Prüfstellen herzustellen. Die Ergebnisse der Spurbildungs-, Druck-Schwell- und Zugversuche haben gezeigt, dass die WSV-Platten trotz ähnlicher Raumdichten nicht zwangsläufig verträgliche Ergebnisse im Versuch aufweisen und sich daher in verschiedenen Prüfstellen keine vergleichbaren Ergebnisse für diese Versuche ermitteln lassen. Lediglich bei den Abkühl- und Spaltzug-Schwellversuchen konnten verträgliche Ergebnisse erzielt werden. Für keine der ermittelten Kenngrößen der Performance-Prüfungen ließen sich Zusammenhänge mit der Raumdichte ermitteln. Somit lässt sich die Größe der Ergebnisse bei den Versuchen nicht auf unterschiedliche Größen der Raumdichten der Probekörper zurückführen. Da sich trotz geringer Unterschiede in den Raumdichten nur in ausgewählten Performance-Untersuchungen Unterschiede zeigen, ist davon auszugehen, dass die Streuungen in den Performance-Untersuchungen vornehmlich auf die Sensitivität dieser Versuche zurückzuführen sind. Das Verfahren zur Herstellung von Probekörpern für Performance-Prüfungen aus WSV-Platten scheint aufgrund der Gesamtheit der ermittelten Kenngrößen (Raumdichte, etc.), deren Aussehen, den Erkenntnissen aus dem Verfahrensaudit sowie der Performance-Prüfungen das richtige Verfahren zu sein.
SEEKING is looking for answers regarding electric powered bicycles and their relation to traffic safety issues. Does a cyclist need "E"? Is it as risky as riding a moped or are E-bikes creating conflicts with other cyclists? The project described herein, funded by the Austrian Ministry of Transport, has the aim of seeking answers to these hot topics. The SEEKING-team shows an in-depth investigation of vehicle dynamic sensing, together with subjective feedback of test riders to detect similarities and differences between conventional cycling and E-biking. Following an overview on the international status quo, measurement runs and their analyses are performed to find a set of preventative measures to make (E-)biking safer. A specific focus is the detection of curve handling, stopping and acceleration phases as well as conflict studies on course-based test rides and "real world" tests on cycling paths (naturalistic riding).
In general the passive safety capability is much greater in newer versus older cars due to the stiff compartment preventing intrusion in severe collisions. However, the stiffer structure which increases the deceleration can lead to a change in injury patterns. In order to analyse possible injury mechanisms for thoracic and lumbar spine injuries, data from the German Inâ€Depth Accident Study (GIDAS) were used in this study. A twoâ€step approach of statistical and caseâ€byâ€case analysis was applied for this investigation. In total 4,289 collisions were selected involving 8,844 vehicles, 5,765 injured persons and 9,468 coded injuries. Thoracic and lumbar spine injuries such as burst, compression or dislocation fractures as well as soft tissue injuries were found to occur in frontal impacts even without intrusion to the passenger compartment. If a MAIS 2+ injury occurred, in 15% of the cases a thoracic and/or lumbar spine injury is included. Considering AIS 2+ thoracic and lumbar spine, most injuries were fractures and occurred in the lumbar spine area. From the case by case analyses it can be concluded that lumbar spine fractures occur in accidents without the engagement of longitudinals, lateral loading to the occupant and/or very severe accidents with MAIS being much higher than the spine AIS.
Die Behandlungskosten von Unfallverletzten werden herkömmlich durch Multiplikation der durchschnittlichen Krankenhaus-Verweildauer mit dem vollpauschalierten und für alle Patienten gleichen Krankenhaus-Tagessatz ermittelt. Zielsetzung der vorliegenden Untersuchung ist es, den tatsächlichen Leistungsaufwand für die Gruppe der Unfallverletzten differenzierter zu erfassen, und zwar durch Addition von Einzelleistungen, die den Input für die stationäre Behandlung darstellen. Eine solche fallbezogene Kostenkalkulation wurde in ausgewählten Krankenhäusern für alle straßenverkehrsunfallverletzen Patienten des Jahres 1989 vorgenommen. Für Unfallverletzte in ambulanter Behandlung ergeben sich durchschnittliche Fallkosten in Höhe von 244 DM. Für die 5 häufigsten Einzeldiagnosen wurden folgende Werte ermittelt. 1. Prellungen der unteren Extremitäten: DM 287 je Patient. 2. Verstauchungen und Zerrungen im Rückenbereich: DM 149 je Patient. 3. Prellungen des Kopfes und des Halses: DM 326 je Patient. 4. Prellungen der oberen Extremitäten: DM 196 je Patient. Für Unfallverletzte in stationärer Behandlung ergeben sich durchschnittliche Fallkosten in Höhe von DM 4.824. Die Kosten liegen bei der Hälfte aller stationär behandelten Patienten unterhalb von DM 2.000. Bei 37 Prozent der Verletzten belaufen sie sich auf einen Betrag zwischen DM 2.000 und DM 7.000, wohingegen 13 Prozent der Fälle eine Behandlung benötigte die mehr als DM 10.000 an Kosten verursachte. Betrachtet man die Kosten der 10 häufigsten Einzeldiagnosen, so lassen sich zwei Gruppen bilden. Gehirnerschütterungen, Prellungen und Verstauchungen verursachten Kosten von weniger als der Hälfte des Durchschnittswertes von DM 4.824, wogegen für Frakturen als zweiter Gruppe weit darüber liegende Beträge errechnet wurden. Die Behandlungskosten von Unfallverletzungen mit Todesfolge liegen aufgrund der Verletzungsschwere bei DM 17.246 im Durchschnitt. Die Ergebnisse zeigen, dass die durchschnittlichen Behandlungskosten von Unfallverletzten in Akutkrankenhäusern in etwa den durchschnittlichen Behandlungskosten aller Patienten in Akutkrankenhäusern entsprechen.
Ziel der Untersuchung war die Findung von Grundlagen, die eine Beurteilung des Rettungsdienstes im Hinblick auf seine Effizienz ermöglichen. Für die Durchführung der Effizienzanalyse wurde ein Messkonzept entwickelt, mit dessen Hilfe Input und Output des Systems "Rettungsdienst" erfasst und mit Hilfe von Kenngrößen einer vergleichenden Analyse unterzogen werden konnten. Mit der Analyse des Inputs wurden alle im Rettungsdienst eingesetzten Faktoren mengen- und wertmäßig erfasst sowie deren Kombination durch Analyse der Aufbau- und Ablauforganisation ermittelt. Als wesentliche Grundlage einer Kostenanalyse diente eine vollständige und detaillierte Kostenrechnung. Die Analyse, die zum Aufbau eines Kenngrößensystems erfolgt, wurde für ein konkretes Untersuchungsgebiet vorgenommen. Auf der Outputseite wird ein erheblicher Informationsmangel im Hinblick auf die Einsatzqualität festgestellt. Gefordert wird eine einheitliche Dokumentation wesentlicher Einsatzmerkmale, die eindeutige Rückschlüsse auf das Einsatzgeschehen zulässt.
Teil 1: In der Verkehrssicherheitsforschung können Sicherheitswirkungen zumeist nicht im (Labor)experiment sondern nur durch Feldversuche, die einem Experiment ähnlich anzulegen sind, erfasst werden. In diesem Zusammenhang spricht man von einem Quasi-Experimentellen-Design. Da sich bei solchen Quasi-Experimenten immer die Frage stellt, ob die gemessenen Änderungen maßnahmebedingt sind oder auf andere Einflüsse zurückgeführt werden können, werden verschiedene Gefahrenquellen benannt und mit Beispielen belegt, die die Gültigkeit der Ergebnisse von Wirksamkeitsuntersuchungen beeinträchtigen können. Es werden darüber hinaus eine Reihe wichtiger Quasi-Experimenteller-Designs dargestellt, die Vor- und Nachteile der Designs diskutiert und Hinweise auf mögliche Einsatzfelder gegeben. Um die Qualität der Ergebnisse von Wirksamkeitsuntersuchungen zu verbessern, wird vorgeschlagen, mehrere Erhebungen mittels ein und derselben Untersuchungsanordnung zugleich an mehreren Orten oder an mehreren Untersuchungsgruppen durchzuführen. Es werden mehrere simultane Untersuchungsdesigns vorgestellt und Einsatzbereiche erläutert. Teil 2: Simultane Wirksamkeitsuntersuchungen von Maßnahmen zur Hebung der Verkehrssicherheit erfordern häufig statistische Methoden zur Analyse von Kennzahlen, die auf andere Kennzahlen bezogen sind. Diese bezogenen Kennzahlen bezeichnet man als Risikogrößen. Es werden Methoden vorgestellt und diskutiert, die eingesetzt werden können, wenn entweder die Bezugsgrößen fest oder stochastisch sind.
Ziel der beschriebenen Untersuchung ist die Ergründung streckencharakteristischer Merkmale bei lokalen Häufungen überwiegend fahrdynamisch begründeter Unfälle auf einbahnigen Außerortsstraßen sowie die Erarbeitung geeigneter Abhilfemaßnahmen. Es wurden Streckenabschnitte mit Unfallhäufungsstellen in Rheinland-Pfalz, Hessen, Saarland und Baden-Württemberg ausgewählt. Auf 58 Untersuchungsstrecken wurde das Geschwindigkeitsverhalten und die streckencharakteristische Geschwindigkeit durch Geschwindigkeitsprofile mit Hilfe von Messfahrten untersucht. Die Streckencharakteristika wurden nach quantifizierbaren Merkmalen wie Kurvigkeit und Krümmungsradien sowie nach subjektiven Beurteilungskriterien aufgeschlüsselt. Unfallhäufungsbereiche wurden durch Beschreibungsmerkmale gekennzeichnet, die den kombinierten Einfluss der Trassierungselemente, der Ausstattung und des Umfeldes erfassten. Die Versuche, quantitative Zusammenhänge zwischen Unfallkennzahlen und einzelnen streckencharakteristischen Merkmalen herzustellen, misslangen. Als weitaus häufigstes Merkmal innerhalb der Unfallhäufungsbereiche zeigte sich eine lokale Steigerung der Kurvigkeit in einer bereits kurvigen Umgebung. An zweiter Stelle der Häufigkeit steht die Mitwirkung von Querneigungs- und Fahrbahndeckenmängeln. Die Autoren stellen fest, dass die heutigen Richtlinien zur Linienführung von Straßen (RAS-L-1) keine ausreichenden Kriterien enthalten, um die häufigste festgestellte Unfallursache zu vermeiden, die darin zu sehen ist, dass innerhalb kurviger Strecken Einzelkurven mit größerer Richtungsänderung und/oder etwas kleinem Krümmungsradius auftreten. Hieraus wird die Notwendigkeit einer entsprechenden Überarbeitung der Richtlinie abgeleitet.
Auf der Basis einer umfangreichen Literaturanalyse, die zu dem Ergebnis kommt, dass trotz einer großen Zahl häufig untersuchter Straßenparameter ein verlässliches Modell zur Geschwindigkeitsprognose noch nicht existiert, resultierte ein empirischer Untersuchungsansatz, in dem bei Versuchsfahrten das Blickverhalten und die Geschwindigkeitswahl von Versuchspersonen gleichzeitig erhoben und quantitativ erfassten Merkmalen des Straßenraums gegenübergestellt wurde. Durch die Untersuchung wurden bisherige Erkenntnisse über Gestaltungsanforderungen an Straße und Straßenumfeld durch die Zuordnungen zur Straßensituation und Geschwindigkeitsregulation bestätigt. Trotz einer starken Streuung erfasster Einzelwerte ließen sich qualitative Reaktionen zwischen den Untersuchungsbereichen Geschwindigkeit, Straßenraum und Blickverhalten feststellen, wobei korrelative Zusammenhänge jedoch kaum erkennbar wurden.
Ziel der Arbeit war die Aufstellung von Maßnahmen, die zur Erhöhung der nächtlichen Verkehrssicherheit auf außerörtlichen Straßen (ohne BAB) geeignet erscheinen. Die Maßnahmen wurden bezüglich ihrer Wirksamkeit bewertet, ihre Durchsetzbarkeit abgeschätzt. Einer detaillierten Auswertung der relevanten Unfallstatistik folgen die Aufstellung und Beschreibung spezifischer Maßnahmen. Diese werden bewertet und einer Prioritätenreihung unterzogen. Umsetzungsmöglichkeiten werden ausführlich diskutiert. Die aus der Untersuchung abgeleiteten Empfehlungen betreffen in erster Linie verstärkte Informationsarbeit und die Beseitigung von Unfallschwerpunkten.
Gegenstand der Untersuchung ist die Bestandsaufnahme des Versorgungsniveaus für Notfallpatienten einer Region sowie die Überprüfung der Frage, ob dieses Versorgungsniveau bedarfsgerecht unter Einhaltung der gesetzlichen Vorgaben sichergestellt wird. Aus den Ergebnissen der Untersuchung der Eintreffzeiten für 19 Notarztsysteme wird ein Handlungsbedarf abgeleitet,der sich auf die Optimierung der bestehenden Rettungssysteme konzentriert. Für die zukünftige Planung wird ein Maßnahmenkatalog formuliert, derzu einer Verbesserung der Notfallversorgung in der untersuchten Region führt.
Im Zentrum steht die Frage, wie lückenlos und in welchem Umfang ein ganzes Großstadtgebiet von dem NAW-Dienst versorgt wird, der den Anspruch erhebt, flächendeckend zu arbeiten. Untersucht wird, wie dieser Dienst den spezifischen gebiets- und bevölkerungsstrukturellen Unterschieden Rechnung trägt. Ferner wird gefragt, inwieweit die Einsatz- und Interventionsstrategien des NAW-Dienstes nicht so angelegt sind, dass sie Versorgungsungleichheiten produzieren und/oder verstärken. Dokumentiert und ausgewertet wurden 15.716 Einsätze, die der mit 5 Notarztwagen ausgestattete NAW-Dienst in Berlin-West innerhalb eines zwölfmonatigen Zeitraums durchgeführt hat. Zusätzlich wurden Daten des ökologischen Kontexts einbezogen, ferner Feuerwehrdaten (technische Einsatzdaten) und klinische Beurteilungen der NAW-Patienten, die in Krankenhäuser eingewiesen wurden. Die Ergebnisse zeigen zeitliche und regionale Differenzen der Einsätze, das Einsatzspektrum des ganzen NAW-Dienstes wie auch der einzelnen Fahrzeuge und die Phasen des Einsatzes. Weite Teile des Berichts verdeutlichen, wie sich differente Interventionsstrategien einzelner Stützpunkte auswirken. Untersucht wird die Wirksamkeit des NAW-Dienstes in Begriffen der Indikationsverifizierung, der Überlebenschancen und der prospektiven Versorgungsaufwendungen für NAW-Patienten nach der klinischen Behandlung.
Im Rahmen einer schriftlichen Befragung konnten von rund 15.000 Schülern der Klassen 6, 8 und 10 aus den vier Landkreisen Ammerland, Holzminden, Northeim und Wesermarsch sowie aus den Städten Celle und Hannover Daten zur Verkehrs- und Unfallbeteiligung dieser Personengruppe erhoben werden. Die Befragung wurde im Schuljahr 1987/88 durchgeführt. Aufgrund des hohen Rücklaufs von 86,2 % aller angeschriebenen Schüler ergibt sich ein Befragungsumfang von 6,9 % aller Schüler der Klassen 6,8 und 10 in Niedersachsen. Die Verteilung der befragten Schüler auf die verschiedenen Schulformen spiegelt die niedersächsische Schullandschaft im Bereich der Sekundarstufe I gut wieder. Hinsichtlich der Unfallbeteiligung der Schüler wurde ermittelt, dass die amtlichen Zahlen über Verkehrsunfälle (der Polizei und der Unfallversicherungsträger) deutlich niedriger liegen als die Zahlen der von den Schülern genannten Unfälle. Ferner ist festzustellen, dass die Polizei in den städtischen Regionen wesentlich häufiger zur Unfallaufnahme hinzugezogen wird, als in den ländlich geprägten Regionen. Bezüglich der Verkehrsbeteiligung der befragten Schüler ist festzuhalten, dass sowohl die Dauer der Verkehrsbeteiligung als noch stärker die Art - das heißt die Verkehrsmittelwahl - durch das Alter, das Geschlecht, die besuchte Schulform und auch durch regionale Faktoren bestimmt werden. Diese Tatsache führte zu dem Ergebnis, dass über die Untersuchungsregionen hinausgehende generelle Aussagen zur Verkehrs- und Unfallbeteiligung kaum zu treffen seien. Effektive Unfallanalysen bedürfen der kleinräumigen Betrachtungsweise.
Im Jahr 1983 wurde eine Untersuchung zur Organisation des Rettungsdienstes im Saarland durchgeführt (vergleiche FP 7.8223, Anwendung des Simulationsmodells Rettungswesen im Saarland). Ein erstes Ziel dieses neuen Projektes war es, die seit der letzten Untersuchung des Rettungsdienstes im Saarland zwischenzeitlich realisierten Maßnahmen (Aufhebung der Krankentransportstellen, Ausbau der Notarztsysteme, etc.) zusammenzustellen und mit der 1983 vorgefundenen Situation zu vergleichen. Es sollte außerdem überprüft werden, ob die festgestellte Zunahme der Notarzteinsätze zu einer Verschiebung der Indikationsstruktur geführt hat beziehungsweise ob der Nachweis geführt werden kann, dass tatsächlich medizinisch begründet der Ausbau der Notarztsysteme sinnvoll war. Der Vergleich der Infrastruktur des Rettungsdienstes im Saarland zeigt, dass im Jahr 1988 25 Rettungswachen existieren, also eine weniger als 1983. Dagegen hat sich die Anzahl der Krankentransportstellen um 4 von 12 auf 16 erhöht. Die Anzahl der bodengebundenen Notarztstandorte hat sich gegenüber 1983 verdoppelt (14 gegenüber 7), wobei die Anzahl der Kompaktsysteme (NAW) mit 5 unverändert blieb. Im Jahr 1984 wurde vorgeschlagen neben den bereits damals geplanten neuen Notarztstandorten zusätzlich in St. Wendel und Lebach Notarztstationen zu errichten. Dieser Vorschlag wurde zwischenzeitlich realisiert. Ebenso ist die damals vorgeschlagene Verlegung der Rettungswache Marpingen nach Tholey in die Realität umgesetzt worden. Im Untersuchungszeitraum 1988 liegt ein um 30 % höheres Einsatzaufkommen als 1983 vor. Einsatzklassenspezifisch ergibt sich hierbei die höchste Zuwachsrate für Notarzteinsätze mit +175 % gefolgt von Krankentransporten (+24 %) und Notfällen (+9%). Betrachtet man Notarzt und Notfalleinsätze zusammen ergibt sich eine Zuwachsrate von 40 %. Für die Gesamtheit der Notfalleinsätze (mit und ohne Notarztindikation) zeigt sich, dass 1988 eine höher qualifizierte Bedienung erfolgt. Während 1983 nur 18,5 % dieser Einsätze als Notarzteinsätze bedient wurden, beträgt 1988 der entsprechende Wert 36,4 %. 1988 hat sich demnach der Anteil der mit Notarzt versorgten Notfalleinsätze verdoppelt. Der Vergleich der Indikationsstellung bei Notarzteinsätzen für die Jahre 1984 bis 1987 hat gezeigt, dass der Anteil der nicht indizierten Notarzteinsätze kontinuierlich über die Jahre 1984 bis 1987 abnimmt. Während 1984 noch 12,2 % dieser Einsätze als nicht indiziert eingestuft wurden, gilt dies 1987 noch für 8,9 % der Einsätze. Gegenüber 1984 ist der Anteil dieser Einsätze somit um 27 % gesunken. Diese Tatsache kann als ein Indiz dafür gewertet werden, dass die in der Rettungsleitstelle getroffenen Entscheidungen über Einstufung der Einsätze aufgrund des Meldebildes zunehmend präziser wurden. Gleichzeitig hat über die Jahre der Anteil der absolut indizierten Notarzteinsätze von 54,3 % im Jahr 1984 auf 57,2 % im Jahr 1987 zugenommen.
Intelligente Bauwerke - Anforderungen an die Aufbereitung von Messgrößen und ihrer Darstellungsform
(2015)
Ziel des Forschungsvorhabens FE 15.0548/2011/GRB war die Ausarbeitung einer Konzeption zu Anforderungen an die Aufbereitung und Verarbeitung von Messgrößen und ihrer Darstellung. Dies beinhaltete die Evaluierung und Entwicklung verschiedener modellbasierter und statistischer Analyseverfahren, die über den bisherigen Stand der Technik der Bauwerksüberwachung hinausgehen. Der Nutzen liegt in der Herausfilterung relevanter Informationen aus umfangreichem Datenmaterial (Vor-Aggregation) sowie der Erzeugung von belastbaren Zustandsinformationen bzw. Vorergebnissen hierzu durch eine frühzeitige, leistungsfähige Plausibilisierung. Es wurde gezeigt, dass durch den Einsatz von leistungsfähigen, gedächtnisbehafteten, selbstlernenden Algorithmen für die Sensorfusion, Interpolation, Plausibilitätserhöhung und Treffen fachtechnischer Monitoringaussagen Ergebnisse erzielt werden können, die bezüglich der Verarbeitung von Mess- und Erfassungsdaten weit über den aktuellen Stand beim Brückenmonitoring hinausgehen. Anhand mehrerer Szenarien, für die reale Erfassungsdaten zur Verfügung standen, wurde gezeigt, dass diese Verfahren sehr zuverlässig verschiedenste Signalstörungen, wie Messausreisser, erhöhtes Rauschen und Brummeinstreuung erkennen können. Nur durch die frühzeitige und zuverlässige Plausibilisierung von Sensordaten von Brückenbauwerken kann verhindert werden, dass offensichtlich fehlerhafte Messwerte (wie z.B. Messausreisser, störungsbehaftete Messungen) zu falschen Vorhersagen der Systemzuverlässigkeit von Brückenbauwerken durch rechnergestützte Systemmodelle führen.
The paper gives an overview of the recent (mostly 2012) figures of killed bus/coach occupants (drivers and passengers) in 27 Member States of the European Union as reported by CARE. The Evolution of the figures of bus/coach occupants killed in road accidents urban, rural without motorway and on motorways from 1991 to 2010 in 15 Member States of the EU supplements this information. More detailed are the figures reported for Germany by the Federal Statistics. The paper displays long-term evaluations (1957 to 2012) for killed, seriously and slightly injured occupants in all kinds of buses/coaches. Midterm evaluations (1995 to 2012) of the figures of fatalities and casualties are displayed for different busses according to their identification of road using as coaches, urban buses, school buses, trolley buses and "other buses". To be able to compare the evolutions of the safety of vehicle occupants it is customary to use different risk indicators. Calculations and illustrations for three often used indicators with their development over time are given: fatalities, seriously injured and slightly injured per 100,000 vehicles registered, per 1 billion (109) vehicle-kilometres travelled and per 1 billion (109) person-kilometres. These indicators are shown for occupants of cars, goods vehicles and buses/coaches. For the period from 1957 until 2012 it is obvious, that for all three vehicle categories analysed there was a clear long-term trend towards more occupant safety in terms of casualties per vehicles registered and per vehicle mileage. This was most significant for car occupants but it can be seen for bus/coach occupants and goodsvehicle occupants as well. Figures of killed occupants and of casualties related to person-kilometres are calculated and displayed for the shorter period 1995 to 2012. Here it becomes obvious that the bus/coach is still the safest mode of transport for the occupants of road vehicles. Graphs for the casualty risk indices still show significantly higher risks for car occupants despite the corresponding curve moved sustainable downwards. It is remarkable, that the risks of being killed or injured for the occupants of urban buses is growing whereas the corresponding risk for the occupants of coaches in line traffic tends downwards. The article ends with a short comparison and discussion of the risk indicators which are actually published for the occupants (driver and passengers) of cars and the passengers of buses/coaches, railroads, trams and airplanes. The interpretation of such information depends on the perception and it seems that for a complete view not only one indicator should be used and the evolutions of the indicator values during longer periods (as displayed with examples in the paper) should also be taken into account.
In der Bundesrepublik ereignen sich jährlich ca. 2 Millionen polizeilich erfasste Straßenverkehrsunfälle. Hiervon sind weniger als 1.000 Unfälle als Großunfälle einzuschätzen. Eine der zentralen Erkenntnisse der Untersuchung besteht darin, dass "Quantensprünge" in der Vermeidung und Bewältigung von Großunfällen erst zu erwarten sind, wenn alle beteiligten Organisationen und Institutionen die anstehenden Aufgaben als organisations- und beteiligtenübergreifendes Managementproblem betrachten und demgemäß handeln. Deshalb stand die Entwicklung des Organisationskonzepts für ein Großunfall-Management Straßenverkehr im Mittelpunkt der Fragestellung. Fallanalysen haben deutlich gezeigt, dass weder Maßnahmen zur Vermeidung noch Strategien zur Bewältigung von Großunfällen räumlich eng begrenzt werden können. Selbst Kreisgrenzen, die beispielsweise im Katastrophenfall von besonderer Bedeutung sind, eignen sich als Bezugsraum nur bedingt. Deshalb empfiehlt sich die "Region", die im politisch-administrativen System der Bundesrepublik begrifflich nicht eindeutig festgelegt ist, als Basiseinheit. Das Großunfall-Management wird in Abhängigkeit von den vorhandenen Risikostrukturen bedarfsgerecht zugeschnitten. Besonderer Wert wurde des weiteren auf eine angemessene Definition und Typisierung von Großunfällen, auf die empirische Analyse von Großunfällen sowie auf die Bewertung der gesetzlichen Grundlagen der Unfallvermeidung und -bewältigung gelegt. Ein differenzierter Katalog von Maßnahmen für die Vermeidung und Bewältigung von Großunfällen rundet die Untersuchung ab.
A means of assessing the passive safety of automobiles is a desirable instrument for legislative bodies, the automobile industry, and the consumer. As opposed to the dominating motor vehicle assessment criteria, such as engine power, spaciousness, aerodynamics and consumption, there are no clear and generally accepted criteria for assessing the passive safety of cars. The proposed method of assessment combines the results of experimental safety tests, carried out according to existing legally prescribed or currently discussed testing conditions, and a biomechanical validation of the loading values determined in the test. This evaluation is carried out with the aid of risk functions which are specified for individual parts of the body by correlating the results of accident analysis with those obtained by computer simulation. The degree of conformance to the respective protection criterion thus deduced is then weighted with factors which take into account the frequency of occurrence and the severity of the accident on the basis of resulting costs. Each of the test series includes at least two frontal and one lateral crash test against a deformable barrier. The computer-aided analysis and evaluation of the simulation results enables a vehicle-specific overall safety index as well as partial and individual safety values to be determined and plotted graphically. The passive safety provided by the respective vehicle under test can be defined for specific seating positions, special types of accident, or for individual endangered parts of the body.
Zur Ermittlung einer Mehr- oder Minderbeanspruchung des Straßenoberbaus durch Lang-Lkw wurde eine Stichprobe von 1.746 Fahrten im Direktverkehr und 483 Fahrten im kombinierten Verkehr analysiert. Die durchschnittliche Fahrzeuggesamtmasse der Lang-Lkw betrug 32,3 t. Ca. 9 % der Lang-Lkw fuhren überladen. Das Niveau der Überladungen lag jeweils unterhalb 3 t. Die maximale Achslast betrug 11,7 t. Die Achslastverteilung von Lang-Lkw im kombinierten Verkehr weist ein niedrigeres Niveau als für Lang-Lkw im Direktverkehr auf. Im Vergleich zu äquivalenten konventionellen Lkw ergibt sich für Lang-Lkw eine um 5 % niedrigere Anzahl äquivalenter 10-t-Achsen. Der mittlere Achszahlfaktor fA von Lang-Lkw beträgt 7,40. Das Transportvolumen eines Lang-Lkw entspricht rechnerisch dem Transportvolumen von 1,53 äquivalenten konventionellen Lkw. Mit zunehmendem Anteil Lang-Lkw am Gesamtkollektiv Schwerverkehr (bis zu 9 %) ist eine zunehmende, vergleichsweise geringe Reduzierung der B-Zahl nach RStO 12 zu verzeichnen, was in der Regel jedoch nicht zu einem Wechsel in die nächstkleinere Belastungsklasse führen würde. Mittels Dimensionierung nach RDO Asphalt 09 errechnet sich bei Einsatz von Lang-Lkw nach dem Ende einer 30-jährigen Nutzungsdauer der Straßenbefestigung ein geringfügig niedrigerer Ermüdungsstatus, der zu einer marginalen Verlängerung des Nutzungszeitraums führen würde. Der Einsatz von Lang-Lkw würde unter Einhaltung der im Feldversuch definierten fahrzeugtechnischen Vorgaben und zulässigen Grenzwerte für Fahrzeuggesamtgewichte und Achslasten nicht zur Mehrbeanspruchung des Oberbaus von Straßen führen. Die rechnerisch festgestellte Minderbeanspruchung des Oberbaus im Vergleich zu konventionellen Lkw hat nur marginale Bedeutung und würde sich somit in der Praxis kaum spürbar auf die Nutzungsdauer der Straßen auswirken.
Die Untersuchung zum Forschungsprojekt FE 82.0499/2011 "Ausdehnung der Kostentragungspflicht des -§ 25a StVG auf den fließenden Verkehr" befasst sich mit der Thematik einer möglichen Ausdehnung der bislang ausschließlich für den ruhenden Verkehrs geltenden Kostentragungspflicht des -§ 25a StVG auf Verkehrsverstöße im fließenden Verkehr. Dieses Forschungsprojekt hatte die Aufgabenstellung zu erfüllen, aus der Arbeitspraxis der Bußgeldbehörden in den Bundesländern eine für die Ansprüche wissenschaftlicher Auswertungen qualitativ und quantitativ ausreichende Datenmenge zur Bearbeitung digital erfasster Geschwindigkeits-, Rotlicht- und Abstandsverstöße zu erheben. Dieser Gesamtdatenbestand sollte gesammelt, thematisch geordnet und hinsichtlich der einschlägigen Tatbestände sowie der Verfahrenseinstellungen aufbereitet werden. Hauptergebnis der Studie ist: - Bei einer Gesamtanzahl von 10,7 % eingestellter Bußgeldverfahren wird eine Anzahl von 2,5 % Bußgeldverfahren eingestellt, weil bei einem mittels digitaler Messtechnik beweissicher festgestellten Verkehrsverstoß und zweifelsfrei dokumentiertem Kfz-Kennzeichen der Fahrzeugführer trotz mindestens einer Ermittlungsmaßnahme nicht vor Eintritt der Verfolgungsverjährung ermittelt werden konnte.
Proposal for a test procedure of assistance systems regarding preventive pedestrian protection
(2011)
This paper is showing a proposal for a test procedure regarding preventive pedestrian protection based on accident analysis. Over the past years pedestrian protection has become an increasing importance also during the development phase of new vehicles. After a phase of focusing on secondary safety, there are current activities to detect a possible collision by assistance systems. Such systems have the task to inform the driver and/or automatically activate the brakes. How practical is such a system? In which kind of traffic situations will it work? How is it possible to check the effectiveness of such a system? To test the effectiveness, currently there are no generally approved identifiable procedures. It is reasonable that such a test should be based on real accidents. The test procedure should be designed to test all systems, independent of the system- working principle. The vFSS group (advanced Forward-looking Safety Systems) was founded to develop a proposal for a technology independent test procedure, which reflects the real accident situation. This contribution is showing the results of vFSS. The developed test procedure focuses on accidents between passenger cars and pedestrians. The results are based on analysis results of in-depth databases of GIDAS, German insurers and DEKRA and added by analysis of national and international statistics. The in-depth analysis includes many pre-crash situations with several influencing factors. The factors are e. g. speed of the car, speed of the pedestrian, moving direction and a possible obscuration of the pedestrian by an object. The results comprise also the different situations of adults and children. Furthermore, they include details regarding influence of the lighting conditions (daylight or night) especially with respect to the accident consequences. In fact, more accidents happen at daylight, but fatal accidents are more often at night. A clustering of parameter combinations was found which represents typical accident scenarios. There are six typical accident scenarios which were merged in four test scenarios. The test scenarios are varying the starting position of the pedestrian, the pedestrian size (adult or child) and the speed of the pedestrian, whereas the speed of the car will not be varied. To ensure the independency from used sensing technologies it is necessary to use a suitable dummy. For example, if sensors are based on infrared, the dummy should emit the temperature of a human being. The test procedure will identify the collision speed as the key parameter for assessing the effectiveness of the tested system. The collision speed is defined as the reduction between initial test speed of the car and impact speed. The assessment of the speed reduction value regarding the safety benefit, however, will be part of a separate procedure.
New vehicle types are extensively tested to check almost all factors that influence ride and handling. With reference to the Association of German Car Tuners" (VDAT e.V.) valuations, approximately 10% of all cars in Germany are being modified by their owners. 28 % of those modifications" sales are divergent wheel-tire combinations, 13 % are tuning measures on the chassis suspension or wheel spacers. In almost all cases the singular modifications present a general permission for specific vehicles they have been tested in. Combined tuning measures, however, are often checked by just one inspector, following a procedure of mostly subjective assessment criteria. Today, critical attributes are only being observed, in case a vehicle is involved in an accident and the modifications are identified as crash causal factors or as a cofactor on the development of a crash. For the first time, a field study allows a survey of safety affecting chassis modifications. The test layout has to comply with some basic conditions. Different vehicle concepts with a wide margin of modifications are required to get a high transferability of the results. A total amount of more than 150 tested vehicles serves the same purpose. The tests are limited concerning the installation time of measurement techniques and the requirement that no damage, defilement or immoderate wear of the vehicles are accepted by their owners. Due to such factors as well as the driver Ìs acceptance, the vehicles are controlled by its owners instead of robots or test drivers. For keeping down the driver- influence, the lane has narrow boundaries and the driver has to drive in strictly adherence to the given instructions. After gathering all modifications, as well as static and kinematic parameters like the toe and camber angle, dynamic testing of predominantly lateral dynamics is conducted. Besides standardized tests like the ISO 3888-2 (Obstacle Avoidance) or the ISO 14512 (Braking on Surfaces with Split Coefficient of Friction), to test the influence of modified kingpin offsets caused by wheel spacers, some deviant tests are conducted. Those are required due to the demand of objective test results for road tests with vertical induced stimulation of the chassis suspension. Hence, new tests on corner braking with and without vertical stimulation have been developed. The interpretation of data includes thresholds, e.g. the maximum entrance velocity without hitting cones, on the one hand, and the analysis of characteristics of data concerning time and frequency range, "1-second values" and peak response times on the other hand. Besides the thresholds as indicators for the achievable velocities, which are mainly affected by friction coefficients, the vehicle reaction in the course of time characterizes the vehicle reaction in the threshold range and consequently the operational demands on the driver. The field study has started and promises the first long-range analysis of chassis modifications. The results offer a basis for hypothesis and resultant further test layouts for oncoming studies of the identified critical tuning measures.
Safety of light goods vehicles - findings from the German joint project of BASt, DEKRA, UDV and VDA
(2011)
Light goods vehicles (LGVs) are an important part of the vehicle fleet, providing a vital component in the European transportation system. On the other hand, LGVs are in the focus of public discussion regarding road safety. In order to analyse the accident situation of LGVs in an objective manner, Federal Highway Research Institute (BASt), VDA, DEKRA and German Insurers Accident Research (UDV) launched a joint project. The aim of this project, which will be finished by mid of 2011, is to identify reasonable measures which will further improve the safety of LGVs. For the first time, these partners jointly together conducted a research project and put together their know-how in accident research. Analyses are based on real-life accident data from the GIDAS database, the Accident Database of UDV (UDB), the DEKRA database and national statistics. The findings deliver answers to questions within the arena of future legislative actions and consumer protection activities. The analyses of databases cover areas of primary and secondary safety of LGVs with a special focus on advanced driver assistance systems (ADAS), driver behaviour as well as partner and occupant protection. Key figures from national statistics are used to highlight hotspots of accidents of LGVs in Germany. Finally, the proposed countermeasures are assessed regarding their potential effectiveness. Amongst others, the results show that the accident situation of LGVs is very similar to that of passenger cars. Noteworthy variations could be found in collisions with pedestrians, at reversing and regarding accident causes. Occupant safety of LGVs is on a higher level compared to cars. Results indicate that seatbelt use is on a significantly lower level compared to cars. This leads to higher-than-average injury risk for unbelted LGV occupants. When it comes to partner protection, there are problems with compatibility at LGVs. For car occupants there is a very high injury risk when colliding with a LGV. It indicates that higher passive safety test standards for LGVs would be counterproductive if they further increase stiffness of LGVs. The analysis of LGV-pedestrian accidents shows that pedestrian kinematic differs significantly from car-pedestrian accidents. At this point, existing pedestrian related test standards developed for cars cannot be adopted to LGVs. When it comes to active safety, ESC proved its effectiveness once again. Beyond that, rear view cameras, advanced emergency braking systems and lane departure warning systems show a safety potential, too. In addition to any technical countermeasures previously discussed, the importance of the driver behavior and attitude regarding the accident risk was investigated. In order to develop successful actions it is important to understand the main target population. In the case of LGV especially the crafts business and smaller companies are the major contributors the safety issue.
Im Jahr 2004 fand an der Medizinischen Hochschule Hannover die erste ESAR-Konferenz (Expert Symposium on Accident Research) statt. Die Idee einer internationalen Konferenz war aus der Notwendigkeit entstanden, diejenigen Experten zusammen zu bringen, die weltweit tätig sind und Verkehrsunfälle wissenschaftlich analysieren, um ihre Ergebnisse gemeinsam zu diskutieren und einem Zielpublikum von Behördenvertretern, Entwicklungsingenieuren der Automobilindustrie und anderen Wissenschaftlern darzubringen. Die durch Professor Otte initiierte und nun zum vierten Male organisierte Konferenz fand eine breite Akzeptanz und ist mittlerweile Bestandteil einer Konferenzlandschaft mit Zielvorträgen von der Fahrzeugsicherheit bis hin zur Verletzungsanalyse und den Unfallursachen. ESAR kann als wissenschaftliches Kolloquium und Plattform für einen Informationsaustausch der Unfallforscher angesehen werden, die sich speziell mit Methoden der Unfalluntersuchung, mit Verletzungsmechanismen und der Bewertung von Verletzungen, Unfallursachen und anderen Bereichen der statistischen Unfalldatenanalyse befassen. Experten aus den Bereichen der Medizin, der Verkehrspsychologie und der Technik sowie Vertreter zuständiger Behörden kommen hier zusammen, um die Erfahrungen in der Unfallprävention und der Unfallrekonstruktion zu diskutieren und um der Forschung neue Felder zu eröffnen. Neben den Belangen der Europäischen Gemeinschaft werden auch die weltweit zu registrierenden hohen Verletztenzahlen berücksichtigt. Wissenschaftliche Vorträge aus aller Welt tragen dazu bei, geeignete Maßnahmen und Methoden zur Analyse und drastischen Verringerung der Zahl der bei Verkehrsunfällen Getöteten zu entwickeln. Die Zusammensetzung des Teilnehmerkreises dieser wie früherer ESAR-Konferenzen hat längst eine über Europa hinausgreifende Internationalitaet erreicht und bietet daher einen aufschlussreichen Überblick über die verschiedenen Standards bestehender Verkehrssicherheit und unterschiedlichen Unfallszenarien und über die Anforderungen an die Unfallanalysen. Die Ergebnisse langjähriger Forschungsarbeiten in Europa, USA, Australien und asiatischen Ländern beinhalten unterschiedliche infrastrukturelle Zusammenhänge und geben Erkenntnisse über Population, Fahrzeugbestand und Fahrereigenschaften. Derartige Informationen bilden eine exzellente Basis für abzuleitende Empfehlungen und Maßnahmen für die Erhöhung der Verkehrssicherheit international.
The role of a national motor vehicle crash causation study-style data set in rollover data analysis
(2010)
On 1 January 2005, The National Highway Traffic Safety Administration, an agency of the United States Department of Transportation, implemented a new data collection strategy designed to assess crash avoidance technologies and report associated behavioral inputs and outcomes. The original goal was a six-year program, however, during the shortened data collection period; it proved a valuable resource for understanding a precrash environment previously obscured by forensic case investigation. Another unintended consequence was an overlap with infrastructure, roadway geometry, and design with the occupant and vehicle outcomes, by virtue of well-defined attributes. External to the collected data, supplementary information was extrapolated, by using manuals published in the United States, by the American Association of State Highway Transportation Officials and selected State Departments of Transportation, in conjunction with the National Motor Vehicle Crash Causation Study (NMVCCS). This provided a backdrop to the infrastructure framework of the rollover problem within which the occupant and vehicle outcomes were studied. If a NMVCCS-style data collection were to be implemented elsewhere, then complementary manuals produced by federal transportation officials might be consulted producing similar relationships. The current study uses NMVCCS data to describe vehicles travelling through diverse design geometries and the outcome for occupants involved in crashes within that system. Codified and extrapolated data form the basis for assessing NMVCCS and its value to the transportation safety community, as the protocols are applicable universally. The benefit in continuing a NMVCCS-style study is noted, as the interaction of roadway infrastructure and occupant protection agencies might find paths to better work together in solving the complex rollover problem using a common data-driven approach.
The overall purpose of the ASSESS project is to develop a relevant and standardised set of test and assessment methods and associated tools for integrated vehicle safety systems, primarily focussing on currently available pre-crash sensing systems. The first stage of the project was to define casualty relevant accident scenarios so that the test scenarios will be developed based on accident scenarios which currently result in the greatest injury outcome, measured by a combination of casualty severity and casualty frequency. The first analysis stage was completed using data from a range of accident databases, including those which were nationally representative (STATS19, UK and STRADA, SE) and in-depth sources which provided more detailed parameters to characterise the accident scenarios (GIDAS, DE and OTS, UK). A common analysis method was developed in order to compare the data from these different sources, and while the data sets were not completely compatible, the majority of the data was aligned in such a way that allowed a useful comparison to be made. As the ASSESS project focuses on pre-crash sensing systems fitted to passenger cars, the data selected for the analysis was "injury accidents which involved at least one passenger car". The accident data analysis yielded the following ranked list of most relevant accident scenarios: Rank Accident scenario 1 Driving accident - single vehicle loss of control 2 Accidents in longitudinal traffic (same and opposite directions) 3 Accidents with turning vehicle(s) or crossing paths in junctions 4 Accidents involving pedestrians The ranked list highlights the relatively large role played by "accidents in longitudinal traffic", and "accidents with turning vehicle(s) or crossing paths in junctions" (the second and third most prevalent accident scenarios, respectively). The pre-crash systems addressed in ASSESS propose to yield beneficial safety outcomes with specific regard to these accident scenarios. This indicates that the ASSESS project is highly relevant to the current casualty crash problem. In the second stage of the analysis a selection of these accident scenarios were analysed further to define the accident parameters at a more detailed level .This paper describes the analysis approach and results from the first analysis stage.
This work aims at bringing evidence for mass incompatibility in frontal impact for cars built according to the UNECE R94 regulation. French national injury accidents database census for years 2005 to 2008 were used for the analysis. The heterogeneity of frontal self-protection among cars of different masses is investigated, as well as the partner protection parameter offered by these cars. The last part of the analysis deals with the estimation of the benefit, in terms of fatal and severe injuries avoided, if crashworthiness was harmonized for the whole fleet of vehicle. This calculation is done for France and is extended to all Europe.
Estimation of the benefits for the UK for potential options to modify UNECE Regulation No. 95
(2010)
The side impact problem in Europe remains substantial. UK data shows that between 22% and 26% of car occupant casualties are involved in a side impact, but this rises to between 29% and 38% for those who are fatally injured. This indicates the more injurious nature of side impacts compared with frontal impacts. The European Enhanced Vehicle safety Committee (EEVC) has performed work to address the side impact issue since 1979. As part of its continuing work, it has recently investigated potential options for regulatory changes to improve side impact protection in cars further. To support this work the UK undertook an analysis to estimate the benefit for potential options to modify UNECE Regulation 95. The analysis used the UK national STATS19 and detailed Co-operative Crash Injury Study (CCIS) accident databases. Of the potential options reviewed, it was found that the addition of a pole test offered the greatest benefit.
Since 2005, the motorcycle crash fatalities in the US exceeded 10% of the overall annual traffic fatalities. Consequently, it has become critical to gain in-depth understanding of the factors and characteristics contributing to motorcycle crashes. Unfortunately, there currently exists no database gathering the necessary information for an in-depth analysis of the US motorcycle crashes. So this study utilizes the NASS/CDS database (National Automotive Sampling System, Crashworthiness Data System) in order to gain insights into the patterns and factors leading to a NASS/CDS motorcycle crash, from 1997 to 2007. NASS/CDS samples about 5,000 passenger car tow-away crashes per year. Each case includes photographs and detailed data on crash and pre-crash characteristics, vehicle types, trajectories, types of impact, and other pertinent roadway and crash scene information, allowing an in-depth investigation of the crash mechanisms. However, the NASS/CDS sampling process specifically focuses on passenger car crashes, so the cases extracted only correspond to crashes in which a passenger vehicle was towed, and a motorcycle was somehow involved. Thus, a by-hand in-depth review of about 200 cases allowed retrieving 106 relevant crashes for this study, tending to represent the severe passenger vehicle(s) versus motorcycle(s) crashes on US roads. The findings lead to the conclusion that these crashes mostly result from the low conspicuity of the motorcycle, and from the inability of the car drivers to fully appreciate and anticipate the behavior of a motorcycle. Indeed, it has been shown that, first, the car drivers involved in these cases did not attempt any avoidance maneuver, second, they were largely of ages under 25, and finally, the majority of the crashes were in an intersection scenario. In addition, the two major scenarios unveiled were the car attempting a left turn from the opposite direction and the car attempting a left turn from the right. The paper mentions several solutions to enhance the motorcycle- conspicuity and to allow the car drivers to better anticipate its behavior, which seem to be key factors in the intersection-related crashes (and more generally in the passenger vehicle(s) versus motorcycle(s) crashes).
The share of high-tensile steel in car bodies has increased over the last years. While occupant safety has generally benefited from this measure, there is a potential risk that, as a result, rescue time may increase considerably. In more than 60% of all car occupant fatalities a technical rescue has been necessary. These are in particular those cases where occupants die immediately at the accident scene. Therefore, in these cases "rescue time" is a very sensitive parameter. In addition to the general analysis of the need of technical rescue and the actual rescue time depending on model years, the injury pattern of occupants requiring technical rescue will be analysed to provide advice for rescue teams. Furthermore, a detailed analysis of rescue measures for the most popular car models depending on the safety cell design is given.
This study that was funded by the Research Association for Automotive Technology (FAT) develops a method for the evaluation of the placement of tanks or batteries by using the deformation frequencies in real-world accidents. Therefore, the deformations of more than 20.000 passenger cars in the GIDAS database are analysed. For each vehicle a contour of deformation is calculated and the deformed areas of the vehicles are transferred in a rangy matrix of deformation. Thereby, the vehicle is divided into more than 190.000 cells. Afterwards, all single matrices of deformation are summarized for each cell which allows representative analyses of the deformation frequencies of accidents with passenger cars in Germany. On the basis of these deformation frequencies it is possible to determine least deformed areas of all passenger cars. Furthermore, intended placements of tanks or batteries can be estimated in an early stage of development. Therefore, all vehicles with deformations in the intended tank areas can be analysed individually. Considering numerous parameters out of the GIDAS database (e.g. collision speed, kind of accident, overlap, collision partner etc.) the occurring forces can be calculated or the deformation frequency can be estimated. Furthermore, it is possible to consider the influence of primary and secondary safety systems on the deformation behaviour. The analysis of "worst case accident events" is an additional application of the calculated matrix of deformation frequency.
The NHTSA-sponsored Crash Injury Research and Engineering Network (CIREN) has collected and analyzed crash, vehicle damage, and detailed injury data from over 4000 case occupants who were patients admitted to Level-I trauma centers following involvement in motor vehicle crashes. Since 2005, CIREN has used a methodology known as "BioTab" to analyze and document the causes of injuries resulting from passenger vehicle crashes. BioTab was developed to provide a complete evidenced-based method to describe and document injury causation from in-depth crash investigations with confidence levels assigned to the causes of injury based on the available evidence. This paper describes how the BioTab method is being used in CIREN to leverage the data collected from in-depth crash investigations, and particularly the detailed injury data available in CIREN, to develop evidence-based assessments of injury causation. CIREN case examples are provided to demonstrate the ability of the BioTab method to improve real-world crash/injury data assessment.
Small overlap frontal crashes are defined by a damage pattern with most of the vehicle deformation concentrated outboard of the main longitudinal structures. These crashes are prominent among frontal crashes resulting in serious and fatal injuries, even among vehicles that perform well in regulatory and consumer information crash tests. One of the critical aspects of understanding these crashes is knowing the crash speeds that cause the types of damage associated with serious injuries. Laboratory crash tests were conducted using 12 vehicles in three small overlap test conditions: pole, vehicle-to-vehicle collinear, and vehicle-to-vehicle oblique (15-degree striking angle). Field reconstruction techniques were used to estimate the delta V for each vehicle, and these results were compared with actual delta V values based on vehicle accelerometer data. Estimated delta Vs were 50% lower than actual values. Velocity change estimates for small overlap frontal crashes in databases such as NASS-CDS significantly underestimate actual values.
In India, heavy truck crashes on national highways account for a number of fatalities. But due to lack of in-depth crash data, detailed analysis is not possible to determine injury mechanisms, and to identify infrastructure, vehicle and human factors affecting these crashes. Over the past two years, researchers in India have established a crash investigation network, with the co-operation of the police and hospitals, to conduct crash investigations and in-depth crash data collection on national highways in the state of Tamil Nadu. This pioneering effort has resulted in the development of a heavy truck crash investigation methodology, the outcome of which is scientific and reliable crash data that has been able to provide good insight into truck crashes and their causes. This paper explains the need for truck crash investigations, the methodology, conclusions of the data analyzed up to date, and the need to focus on truck driver working conditions.
Aim of the study was to evaluate the protective effect of bicycle helmets particularly considering injuries to the head and to the face. Accidents with the participation of bicyclists which occurred from 2000 to 2007 were chosen from GIDAS. We observed that injuries to the head and face were more severe in the group of non-helmeted riders. There seems to be no significant difference in injuries with AIS 3-6. Altogether 26 cyclists were killed. 2 of them wore a helmet (1% of helmeted cyclists), 24 did not (1% of non-helmeted cyclists). Only one killed rider (without helmet) did not suffer from polytrauma (only head injuries recorded). The findings seem to support the thesis of a preventive effect of the bicycle helmet, however the two groups are different in their characteristics related to riding speed. Necessarily we need a multivariate model to evaluate the effect of helmets.
In order to enable foreseeing or comparing the benefit of safety systems or driver assistance systems in Germany, in the United States and in Japan, the traffic accident databases in those three countries are examined. The variables used are culpable party, collision partner, accident type, and injury level and the method to re-classify the databases for comparison are proposed. The result indicates that single passenger car fatality is the most frequent in Germany and in the United States, while passenger car vs. pedestrian is the most frequent fatality scenario in Japan. When the casualty by fatality ratio is focused, the greatest difference is observed in rear-end collisions. The ratio of slight injuries in Japan yields about eighteen times as many as those in Germany, and about eight times as many as those in the United States.
An eCall device has been mounted on some vehicles in France since 2003. It is an integrated car radio/GSM/GPS system that can be used with a SIM card. When an accident occurs, a call can be sent manually or automatically made to a telephone call centre. Knowing the geographic location, the vehicle identity and the possibility of a direct communication with the people involved enables the nearest emergency services to be called out. In this context, the LAB / CEESAR have set up a study aimed at evaluating the effectiveness of this system. The purpose of this paper is to detail the E-call system evaluation method of effectiveness used and give a global synthesis of the results.
The aim of this study was to evaluate the performance and accuracy of Event Data Recorders (EDRs). The analysis was based on J-NCAP crash tests from 2006"2007, with the corresponding EDR datasets. The pre-crash velocity, maximum delta-V and delta-V versus time history data recorded in the EDRs were compared with the reliable crash test data. The difference between the EDR pre-crash velocity and the laboratory test speed was less than 4 percent. In contrast, in several cases the maximum delta-V and delta-V versus time history data obtained from the EDRs showed uncertainty of measurement in comparisons with the reliable delta-V data. The difference in maximum delta-V in these comparisons was more than 5 percent in 10 of 14 tests and more than 10 percent in 4 of 14 tests. The EDRs underestimated the maximum delta-V in almost all tests. It was also concluded that the calculated acceleration from the EDR delta-V versus time history data showed good agreement with the instrumented accelerometer signal during the collision in almost all tests.
The bicyclist accidents were analyzed to get better understanding of the occurrences and frequency of the accidents, injury distributions, as well as correlation of injury severity/outcomes with engineering and human factors in two different countries of China and Germany. The accident cases that occurred from 2001 to 2006 were collected from IVAC database in Changsha and GIDAS database in Hannover. Based on specified sampling criteria, 1,570 bicyclist cases were selected from IVAC database in Changsha, and 1806 cases were collected from Hannover, documented in GIDAS database. Statistical analyses were carried out by using these selected data. The results from the statistical analysis are presented and discussed in this study.
One of the major problems of road safety in Europe is the powered two wheelers accidents. One of the European countries with one of the highest rates is Portugal where in 2006, mopeds and motorcycles fatalities represented 27% of all road users deaths. In this work, a deep analysis and overview of the current state of mopeds and motorcycles accidents for the 2004-2006 period is presented. Within this period 830 PTW occupants die, 2958 have been severely injured and 25000 suffer slight injuries. A detailed analysis of the conditions of these accidents has been carried out, using the data of the national accident database. This analysis provides global information, about geographic environmental conditions, driver- characteristics among others. From this data detailed information is obtained allowing to know when, where and who. In order to answer the question why more a widely collection of data has been collect for 70 accidents. The data has been collected using OECD methodology. For these accidents a detailed reconstruction has been carried out, what is especially important for fatal accidents where for instance speed in an important factor. From these collection and analysis of data a wider overview of facts and measures are extracted. Among them, some are emphasized such as that the quality and non-use of helmets plays an important role in severe and fatal accidents especially for accidents involving moped vehicles, or speed is the most important factor in fatal accidents involving motorcycles. Concerning motorcycle accident reconstruction, different tools can be used depending of the accident scenario and complexity. For simple cases, with specific characteristics, analytical formulation based in vehicle crash dynamics can be use in order to determine the impact speed of the vehicles impact, analysing the skid marks, deformations, victims rest position and considering parameters (EES, vehicle deceleration, etc). Aspects such as the energy absorption capability of motorcycles are also discussed. In the general cases the accident reconstruction software Pc-Crash has been used for the reconstruction of the accident. In very complex cases, has for instance the impact between motorcyclist and barriers, Madymo software is used especially to determine speed from injuries. An example of the impact of a motorcyclist and a motorcyclist-friendly barrier is present to illustrate the benefits and limitations of such systems.
In Germany averagely two million traffic accidents happen each year and emergency medical services are called to more than 400 000 patients. Even though this number is decreasing continuously (due to improvements in the fields of vehicle safety, road construction, and accident prevention) every case is yet a challenge for the rescuers and requires improvements in emergency medicine as well. Especially during diagnostics right at the accident scene, there are only limited instruments available to gain the necessary knowledge of the injuries suffered, to come to essential decisions about treatment or transport. To provide an additional diagnostic aid by scouting and estimating the situation, a software-tool calculating the likeliness of the most frequent severe injuries (AIS 3-6) of front occupants in passenger cars has been developed to deliver this necessary information about particular accident scenarios. To achieve this, logistic likelihood functions have been calculated in a multivariate regression analysis analysing all AIS 3+ injuries in the GIDAS database of the years 1999-2006 that happened more than four times
Crash involvement studies using routine accident and exposure data : a case for case-control designs
(2009)
Fortunately, accident involvement is a rare event: the chance of an individual road user trip to end up in a crash is close to zero. Thus, according to general epidemiological principles one can expect the case-control study design to be especially suitable for quantifying the relative risk (odds ratio) of accident involvement of road users with a certain risk factor as compared to road users that do not have this characteristic. Ideally, of course, the database for such a case-control study should be established by drawing two independent random samples of cases (accidental units) and controls (nonaccidental units), respectively. If, however, special data collection is not an option, it is nevertheless possible to analyze routine accident and exposure data under a case-control design in order to fully exploit the information contained in already existing databases. As a prerequisite, accident and exposure data from different sources are to be combined in a single file of micro or grouped data in a way consistent with the case-control study design. Among other things, the proposed methodological approach offers the possibility to use in-depth data of the GIDAS type also in investigations of active vehicle safety by combining this data with appropriate vehicle trip data collected in mobility surveys.
Nowadays, traffic accidents are recorded in historical databases. Regarding the huge quantity of data, the use of data mining tools is essential to help Experts, for automatically extracting relevant information in order to establish and quantify relations between severity and potential factors of accidents. An innovative approach is here proposed for an in depth investigation of real world accidents data base. Mutual information ratio based on conditional entropies is used to quantity the association strength between an accident outcome descriptor (injury severity) and other potential association factors. Information theoretic methods help to select automatically groups of factors mostly responsible of the severity of accident.
A lot of factors are related to a road traffic accident; particularly human factors such as road use characteristic, driving maneuver characteristic and safety attitude are the major ones. As a random factor is also included, so it is necessary to minimize the contribution of a random factor to identify human factors related to a road traffic accident. There are several standpoints for traffic accident analysis, such as vehicle-based, location-based and driver-based. And it is effective to analyze driver-based traffic accident data for discussion on the relation between human factors and accidents. An integrated traffic accident database system was developed for analysis considering driver- accident and violation records by ITARD, and several studies were carried out for the evaluation. Useful data for discussion on the relation between types of collision and traffic violations, and the effect of accident experience to the following accident were obtained.
The purpose of this work is to investigate the association between the injuries in motorcycle accident and the main accident configurations. The data were provided by a multicentric case-control study MAIDS regarding the risk of crash and injuries of motorcyclists. Chi-square test was used to evaluate the relationship between the variables and a logistic regression was performed to evaluate the association of injury severity with some variables supposed to be predictive factors. Lesive patterns characterized by internal haemorrhages are mainly associated with fronto-lateral crashes, above all in urban areas. Lacerations or abrasions, mainly reported in torso and lower extremities, are mostly associated with single crashes or accidents in queue also for crashes occurred to low speed (< 50 km/h). The severity of injuries is highly associated with impact speed, regardless of the crash configuration. Fractures and haemorrhages play an important role in determining the severity of injuries. The upper extremities are the most frequently traumatised anatomic areas.
Novice drivers are at high risk for crash involvement. We performed an analysis of causations, injury patterns and distributions of novice drivers in cars and on motorcycles in road traffic as a basis for proper measurements. Method Data of accident and hospital records of novice drivers (licence < 2 years) were analysed focusing the following parameters: injury type, localisation and mechanism, Abbreviated Injury Scale (AIS), maximum AIS (MAIS), delta-v, collision speed and other technical parameters and have been compared to those of experienced drivers. In 18352 accidents in the area of Hannover (years1985"2004), 2602 novice drivers and 18214 experienced drivers were recorded having an accident. Novice car drivers were more often and severe injured than experienced and on motorcycles the experienced riders were at higher risk. Novice drivers of both groups sustained more often extremity injuries. 4.5 % novice car drivers were not restraint compared to 3.7 % of the experienced drivers and 6.1 % novice motorcycle drivers did not wear a proper helmet (versus 6.5 %). Severe injuries sustained at a rate of 20 % at collision speeds below 30 km/h and in 80% at collision speeds above 50 km/h. Novice car drivers drove significant older cars. The risk profile of novice drivers is similar to those of drivers older than 65 years. Structural protection and special lectures like skidding courses could be proper remedial action next to harder punishment of violations.
Pedestrian accidents are one of the major concerns related with road accidents around the world. Portugal has one of the highest rates of pedestrian fatalities in Europe. In this paper an overview conditions were the pedestrian accidents occurred in Portugal is presented. In the last years, a project related with the pedestrian accidents has run in Portugal for the period 2004-2006 where 603 people died, 2097 have been severely injured and about 17000 slightly injured. Within this project all the pedestrian accidents in this period have been analysed providing global information about a wide range of aspects, since location, driver and pedestrian characteristics, weather and road conditions, among others. In addition, 50 in-depth accidents have been investigated and the data collected according the Pendant methodology. For this in-depth methodology detailed information about the accident has been collected, including injuries, vehicle damage, road conditions and road user- behaviour and actions. An accident reconstruction has been carried for each case including the determination of the speeds and driver actions, and the analysis of the contributing factors for the accident. Depending of the accident complexity, different methodologies have been used to analyse these accident, from the classical analytical equations such as Simms and Woods, to the use of detailed computational pedestrian models as those included in the commercial software- PC-Crash-® or Madymo-®. Also one of the goals of our investigation is the development of multibody models and methodologies for the reconstruction of pedestrian accidents. Some of these tools integrated in the commercial software Cosmos Motion-® are presented. The advantages of the different approaches are compared and discussed for some of the accidents investigated. With these tools the impact speed can be determined from the projection distance with analytical tools or PC-Crash-®, but more complex tools should be used to determine speed from the injuries, what is especially important for fatal accidents. The influence of the vehicle geometry and stiffness characteristics is another aspect analysed, where the influence of the vehicle stiffness has been determined using a combined multibody-finite elements approach within the software Madymo-®.
The national accident statistics demonstrate that the situation of passenger car side impacts is dominated by car to car accidents. Car side to pole impacts are relatively infrequent events. However the importance of car side to pole impacts is significantly increasing with fatal and seriously injured occupants. For the present study the German in-depth database GIDAS (German In-Depth-Accident Study) and the UK based database CCIS (Co-operative Crash Injury Study) were used. Two approaches were undertaken to better understand the scenario of car to pole impacts. The first part is a statistical analysis of passenger car side to pole impacts to describe the characteristics and their importance relevant to other types of impact and to get further knowledge about the main factors influencing the accident outcome. The second part contains a case by case review on passenger cars first registered 1998 onwards to further investigate this type of impact including regression analysis to assess the relationship between injury severity and pole impact relevant factors.
While many medical studies have dealt with the incidence, nature and treatment of polytrauma the injury-causing accident mechanisms are rarely discussed in detail, mostly due to the lack of documentation of the technical aspects. The present prospective study was started in late 2007 and collects data from traffic accidents with most severely injured in six south- German counties and two larger cities for the duration of one year. It is aimed at identifying and documenting all polytrauma cases (ISS ≥ 16) caused by traffic accidents and their crash circumstances. The data collection is based on an interdisciplinary concept to include both the police, emergency dispatch centers, hospitals and fire departments in the region and is completely anonymous. Potentially relevant cases where an emergency physician was called to the scene of a traffic accident are provided by the dispatch center. All three hospitals in the region suited for the treatment of polytraumatised patients record injuries, major diagnostic and surgery data. Data and images from the accident scene are provided by the police and by fire departments. The latter provide information which is usually not available from the police, like deployed airbags, vehicle extrication measures and detailed views of car interiors. The main objective of the study is to determine the structure of road users who sustain a polytrauma, their crash opponents and the injury patterns found in relation to the collision configuration and the protection by seat belts, air bags and other devices. With detailed documentation of vehicle damage and extrication measures the study is also intended to support the development of injury predictors for pre-hospital treatment and provide field data regarding further improvement of technical rescue.