Sonstige
Filtern
Erscheinungsjahr
Dokumenttyp
- Buch (Monographie) (563)
- Konferenzveröffentlichung (404)
- Wissenschaftlicher Artikel (92)
- Bericht (23)
- Teil eines Buches (Kapitel) (14)
- Arbeitspapier (13)
Sprache
- Deutsch (771)
- Englisch (337)
- Mehrsprachig (1)
Schlagworte
- Germany (575)
- Deutschland (574)
- Research report (413)
- Forschungsbericht (411)
- Conference (329)
- Konferenz (325)
- Accident (229)
- Unfall (229)
- Safety (225)
- Sicherheit (223)
- Bewertung (216)
- Evaluation (assessment) (170)
- Test (157)
- Versuch (149)
- Injury (126)
- Verletzung (123)
- Measurement (111)
- Messung (111)
- Statistics (108)
- Method (107)
- Statistik (106)
- Verfahren (105)
- Prüfverfahren (102)
- Test method (97)
- Driver (95)
- Verhalten (95)
- Behaviour (93)
- Analyse (math) (92)
- Fahrer (92)
- Analysis (math) (90)
- Richtlinien (90)
- Specifications (90)
- Simulation (86)
- Unfallrekonstruktion (83)
- Fahrzeug (77)
- Vehicle (75)
- Unfallverhütung (72)
- Verbesserung (72)
- Improvement (71)
- Berechnung (70)
- Calculation (69)
- Planung (67)
- Planning (66)
- Interview (64)
- Risiko (64)
- Autobahn (63)
- Fatality (63)
- Risk (63)
- Tödlicher Unfall (63)
- Traffic (62)
- Verkehr (62)
- Pedestrian (61)
- Bridge (60)
- Fußgänger (60)
- Datenbank (59)
- Datenerfassung (59)
- Schweregrad (Unfall, Verletzung) (59)
- Car (58)
- Brücke (57)
- Severity (accid, injury) (57)
- Data acquisition (56)
- Geschwindigkeit (56)
- Development (55)
- Speed (55)
- injury) (55)
- Entwicklung (54)
- Leistungsfähigkeit (allg) (54)
- Reconstruction (accid) (54)
- Schweregrad (Unfall (54)
- Verletzung) (54)
- Accident prevention (53)
- Efficiency (52)
- Tunnel (51)
- Prevention (49)
- Cause (48)
- Radfahrer (48)
- Ursache (48)
- Cyclist (47)
- Highway (46)
- On the spot accident investigation (45)
- Severity (accid (45)
- Straße (45)
- Fahrzeugführung (44)
- Untersuchung am Unfallort (44)
- Anfahrversuch (43)
- Collision (42)
- Europa (42)
- Europe (42)
- Evaluation (42)
- Zusammenstoß (41)
- Bemessung (40)
- Impact study (40)
- Benutzung (39)
- Driving (veh) (38)
- Modification (38)
- Motorcyclist (38)
- Motorradfahrer (38)
- Motorway (38)
- Passives Sicherheitssystem (38)
- Pkw (38)
- Use (38)
- Education (37)
- Fahrerassistenzsystem (37)
- Prognose (37)
- Rechenmodell (37)
- Wirksamkeitsuntersuchung (37)
- Accident rate (36)
- Data bank (36)
- Erziehung (36)
- Insasse (36)
- Lorry (36)
- Mathematical model (36)
- Verkehrssteuerung (36)
- Belastung (35)
- Durability (35)
- Load (35)
- Organisation (35)
- Unfallhäufigkeit (35)
- Verkehrsstärke (35)
- Verminderung (35)
- Dauerhaftigkeit (34)
- Driver assistance system (34)
- Main road (34)
- Stadt (34)
- Traffic control (34)
- Urban area (34)
- Veränderung (34)
- Design (overall design) (33)
- Fahranfänger (33)
- Fernverkehrsstraße (33)
- Forecast (33)
- Kind (33)
- Traffic flow (33)
- Verkehrserhebung (33)
- Child (32)
- Decrease (32)
- Frontalzusammenstoß (32)
- Kosten (32)
- Modell (32)
- Passive safety system (32)
- Recently qualified driver (32)
- Road network (32)
- Straßennetz (32)
- Vehicle occupant (32)
- Head on collision (31)
- Highway design (31)
- Lkw (31)
- Alte Leute (30)
- Condition survey (30)
- Cost (30)
- Impact test (veh) (30)
- Straßenentwurf (30)
- Zustandsbewertung (30)
- Accident reconstruction (29)
- Attitude (psychol) (29)
- Information (29)
- Old people (29)
- Skill (road user) (29)
- Surfacing (29)
- Traffic count (29)
- Active safety system (28)
- Driver training (28)
- Driving aptitude (28)
- Erste Hilfe (28)
- Jugendlicher (28)
- Knotenpunkt (28)
- Risikobewertung (28)
- Adolescent (27)
- Ausrüstung (27)
- Equipment (27)
- Gestaltung (27)
- Motorrad (27)
- Norm (tech) (27)
- Sachschaden (27)
- Verkehrsfluss (27)
- Administration (26)
- Aktives Sicherheitssystem (26)
- Concrete (26)
- Damage (26)
- Decke (Straße) (26)
- Einstellung (psychol) (26)
- Emission (26)
- Fahrausbildung (26)
- First aid (26)
- Legislation (26)
- Motorcycle (26)
- Risk assessment (26)
- Road construction (26)
- Straßenbau (26)
- Traffic concentration (26)
- Beton (25)
- Bituminous mixture (25)
- Gesetzgebung (25)
- Instandsetzung (25)
- Junction (25)
- Layout (25)
- Repair (25)
- Bearing capacity (24)
- Bituminöses Mischgut (24)
- Deformation (24)
- Numerisches Modell (24)
- Quality assurance (24)
- Qualitätssicherung (24)
- Tragfähigkeit (24)
- Verkehrsinfrastruktur (24)
- Verwaltung (24)
- Digital model (23)
- Festigkeit (23)
- Freeway (23)
- Maintenance (23)
- Model (not math) (23)
- Unterhaltung (23)
- Verformung (23)
- Construction (22)
- Fahrgeschicklichkeit (22)
- Forschungsarbeit (22)
- Lebenszyklus (22)
- Spannbeton (22)
- Specification (standard) (22)
- Database (21)
- Economic efficiency (21)
- PKW (21)
- Prestressed concrete (21)
- Strength (mater) (21)
- Wirtschaftlichkeit (21)
- Bau (20)
- Baustelle (20)
- Error (20)
- Fire (20)
- Information documentation (20)
- Kontrolle (20)
- Landstraße (20)
- Oberfläche (20)
- Sicherheitsgurt (20)
- Surface (20)
- Surveillance (20)
- Transport infrastructure (20)
- Verhütung (20)
- Anthropometric dummy (19)
- Cost benefit analysis (19)
- Head (19)
- Kopf (19)
- Life cycle (19)
- Rural road (19)
- Technologie (19)
- Technology (19)
- Water (19)
- Before and after study (18)
- Bindemittel (18)
- Binder (18)
- Construction site (18)
- Eigenschaft (18)
- Environment (18)
- Fehler (18)
- Grenzwert (18)
- Griffigkeit (18)
- Limit (18)
- Metal bridge (18)
- Organization (association) (18)
- Perception (18)
- Pollutant (18)
- Properties (18)
- Quality (18)
- Qualität (18)
- Safety belt (18)
- Seitlicher Zusammenstoß (18)
- Straßenverkehr (18)
- Temperatur (18)
- Temperature (18)
- Traffic lane (18)
- Verkehrsteilnehmer (18)
- Vorher Nachher Untersuchung (18)
- Wahrnehmung (18)
- Wasser (18)
- Betonstraße (Oberbau) (17)
- Biomechanics (17)
- Biomechanik (17)
- Cracking (17)
- Emergency (17)
- Fahrleistung (17)
- Notfall (17)
- Reinforcement (in mater) (17)
- Research project (17)
- Rigid pavement (17)
- Rissbildung (17)
- Road user (17)
- Side impact (17)
- Skidding resistance (17)
- Standardisierung (17)
- Straßenverkehrsrecht (17)
- Traffic regulations (17)
- Umwelt (17)
- Vehicle mile (17)
- Witterung (17)
- Age (16)
- Alter (16)
- Articulated vehicle (16)
- Bremsung (16)
- Experience (human) (16)
- Fahrstreifen (16)
- Fahrzeugsitz (16)
- Gelenkfahrzeug (16)
- Kapazität (Straße) (16)
- Medical aspects (16)
- Medizinische Gesichtspunkte (16)
- Reinforced concrete (16)
- Schutzhelm (16)
- Sensor (16)
- Standardization (16)
- Traffic restraint (16)
- Wirtschaftlichkeitsrechnung (16)
- Airbag (15)
- Bewehrung (15)
- Bitumen (15)
- Boden (15)
- Braking (15)
- Comprehension (15)
- Crash helmet (15)
- Detection (15)
- Drunkenness (15)
- Dummy (15)
- EU (15)
- Erfahrung (menschl) (15)
- Leg (human) (15)
- Lärm (15)
- Mobilität (15)
- Seat (veh) (15)
- Software (15)
- Soil (15)
- Stahlbeton (15)
- Stahlbrücke (15)
- Trunkenheit (15)
- Verkehrsbeschränkung (15)
- Weather (15)
- Air pollution (14)
- Auffahrunfall (14)
- Bicycle (14)
- Bus (14)
- Classification (14)
- Decision process (14)
- Entscheidungsprozess (14)
- Experimental road (14)
- Fahrrad (14)
- Fahrstabilität (14)
- International (14)
- Klassifizierung (14)
- Krankenhaus (14)
- Luftverunreinigung (14)
- Medizinische Untersuchung (14)
- Noise (14)
- Organization (14)
- Rear end collision (14)
- Schadstoff (14)
- Telematik (14)
- Vehicle handling (14)
- Baustoff (13)
- Bauwerk (13)
- Brustkorb (13)
- Communication (13)
- Droge (13)
- Drugs (13)
- Engineering structure (13)
- Expert opinion (13)
- Fahrtauglichkeit (13)
- Flexible pavement (13)
- Gutachten (13)
- Güterverkehr (13)
- Hospital (13)
- Human factor (13)
- Medical examination (13)
- Menschlicher Faktor (13)
- Messgerät (13)
- Mobility (13)
- Personal (13)
- Personnel (13)
- Psychologie (13)
- Psychology (13)
- Vereinigtes Königreich (13)
- Versuchsstrecke (13)
- Überschlagen (13)
- Aggregate (12)
- Apparatus (measuring) (12)
- Automatisch (12)
- Beam (12)
- Delivery vehicle (12)
- Driver information (12)
- Führerschein (12)
- Kommunikation (12)
- Laboratorium (12)
- Level of service (12)
- Lichtsignal (12)
- Material (constr) (12)
- Nachhaltige Entwicklung (12)
- Orthotropic plate (12)
- Stability (12)
- Sustainability (12)
- Telematics (12)
- Time (12)
- Traffic signal (12)
- Verkehrsqualität (12)
- Verständnis (12)
- Air bag (restraint system) (11)
- Asphaltstraße (Oberbau) (11)
- Austria (11)
- Bein (menschl) (11)
- Capacity (road, footway) (11)
- Carriageway marking (11)
- Datenverarbeitung (11)
- Deicing (11)
- Ermüdung (mater) (11)
- Fahrbahn (11)
- Fahrbahnmarkierung (11)
- Fahrerinformation (11)
- Fatigue (mater) (11)
- Feuer (11)
- Finite element method (11)
- Impact test (11)
- Interior (veh) (11)
- Japan (11)
- Krankheit (11)
- Oberflächentextur (11)
- Ort (Position) (11)
- Overturning (veh) (11)
- School (11)
- Schule (11)
- Sound (11)
- Standfestigkeit (11)
- Thorax (11)
- USA (11)
- Unfallschwerpunkt (11)
- Sichtbarkeit (11)
- Winter maintenance (11)
- Winterdienst (11)
- Zuschlagstoff (11)
- Österreich (11)
- Accident black spot (10)
- Aufmerksamkeit (10)
- Auftaumittel (10)
- Balken (10)
- Behinderter (10)
- Beinahe Unfall (10)
- Brand (10)
- Bremse (10)
- Chemical analysis (10)
- Chemische Analyse (10)
- Data processing (10)
- Digitale Bildverarbeitung (10)
- Driving (10)
- Driving test (10)
- Einsatzfahrzeug (10)
- Emergency vehicle (10)
- Fahreignung (10)
- Fahrprüfung (10)
- Fahrsimulator (10)
- Fahrzeuginnenraum (10)
- Feinstaub (10)
- Jahr (10)
- Location (10)
- Nacht (10)
- Near miss (10)
- Night (10)
- Nitrogen oxide (10)
- Occupation (10)
- Policy (10)
- Politik (10)
- Psychological aspects (10)
- Psychological examination (10)
- Psychologische Gesichtspunkte (10)
- Psychologische Untersuchung (10)
- Public transport (10)
- Publicity (10)
- Reaction (human) (10)
- Reaktionsverhalten (10)
- Residential area (10)
- Sample (stat) (10)
- Schall (10)
- Stadtplanung (10)
- Stichprobe (10)
- Town planning (10)
- Traffic density (10)
- United Kingdom (10)
- Verkehrszusammensetzung (10)
- Werbung (10)
- Wohngebiet (10)
- Zeit (10)
- Öffentlicher Verkehr (10)
- Adaptation (psychol) (9)
- Anpassung (psychol) (9)
- Antikollisionssystem (9)
- Attention (9)
- Blood alcohol content (9)
- Blutalkoholgehalt (9)
- Brake (9)
- Cement (9)
- Coefficient of friction (9)
- Cycle track (9)
- Detektion (9)
- Dynamics (9)
- Dynamik (9)
- Einbau (9)
- Eye movement (9)
- Front (9)
- Gemeindeverwaltung (9)
- Gesetzesübertretung (9)
- Highway traffic (9)
- Illness (9)
- Image processing (9)
- In situ (9)
- Konzentration (chem) (9)
- Kunststoff (9)
- Laboratory (not an organization) (9)
- Laying (9)
- Local authority (9)
- Manufacture (9)
- Particulate matter (9)
- Pavement (9)
- Pavement Management System (9)
- Probability (9)
- Radweg (9)
- Reibungsbeiwert (9)
- Road traffic (9)
- Schutzeinrichtung (9)
- Shear (9)
- Sichtbarkeit (9)
- Simulator (driving) (9)
- Steifigkeit (9)
- Stickoxid (9)
- Stiffness (9)
- Surface texture (9)
- Traffic composition (9)
- Traffic engineering (9)
- Verbundbrücke (9)
- Wahrscheinlichkeit (9)
- Wirbelsäule (9)
- Zement (9)
- Abbiegen (8)
- Anti locking device (8)
- Augenbewegungen (8)
- Automatic (8)
- Bend (road) (8)
- Berufsausübung (8)
- Bevölkerung (8)
- Blood (8)
- Blut (8)
- Bridge deck (8)
- CEN (8)
- Carriageway (8)
- Cervical vertebrae (8)
- Composite bridge (8)
- Concentration (chem) (8)
- Durchlässigkeit (8)
- Ebenheit (8)
- Ecobalance (8)
- Electronic stability program (8)
- Financing (8)
- Finanzierung (8)
- Fracture (bone) (8)
- Frau (8)
- Fuge (8)
- Geschichte (8)
- Government (national) (8)
- Halswirbel (8)
- Herstellung (8)
- History (8)
- Immission (8)
- Innenstadt (8)
- Intelligent transport system (8)
- Intelligentes Transportsystem (8)
- Joint (structural) (8)
- Knochenbruch (8)
- Leistungsfähigkeit (Fahrer) (8)
- Methode der finiten Elemente (8)
- Oberbau (8)
- Offence (8)
- Offender (8)
- Orthotrope Fahrbahntafel (8)
- Permeability (8)
- Personality (8)
- Persönlichkeit (8)
- Plastic material (8)
- Querschnitt (8)
- Rechtsübertreter (8)
- Rehabilitation (8)
- Reinforcement (gen) (8)
- Severity (acid (8)
- Straßenkurve (8)
- Stress (psychol) (8)
- Town centre (8)
- Vegetation (8)
- Vehicle regulations (8)
- Verarbeitbarkeit (8)
- Verkehrsablauf (8)
- Verkehrsuntersuchung (8)
- Verstärkung (allg) (8)
- Wearing course (8)
- Workability (8)
- Year (8)
- Ökobilanz (8)
- Abdichtung (7)
- Accompanied driving (7)
- Alignment (7)
- Antiblockiereinrichtung (7)
- Audit (7)
- Auftrag (7)
- Begleitetes Fahren (7)
- Betriebshof (7)
- Bruch (mech) (7)
- Brückenbelag (7)
- China (7)
- Collision avoidance system (7)
- Compliance (specif) (7)
- Continuous (7)
- Contract (7)
- Cross section (7)
- Deckschicht (7)
- Disabled person (7)
- Driving licence (7)
- Eins (7)
- Elektrofahrzeug (7)
- Elektronisches Stabilitätsprogramm (7)
- Entdeckung (7)
- Fahrbahntafel (7)
- France (7)
- Frankreich (7)
- Frequency (7)
- Führerschein Punktesystem (7)
- Geschwindigkeitsbeschränkung (7)
- Goods traffic (7)
- Interchange (7)
- Knee (human) (7)
- Kontinuierlich (7)
- Lieferfahrzeug (7)
- Linienführung (7)
- One (7)
- Optimum (7)
- Overtaking (7)
- Point demerit system (7)
- Pollution (7)
- Pollution concentration (7)
- Population (7)
- Rehabilitation (road user) (7)
- Reifen (7)
- Reproducibility (7)
- Reproduzierbarkeit (7)
- Retraining of drivers (7)
- Risk taking (7)
- Rückfalltäter (7)
- Safety fence (7)
- Sample (mater) (7)
- Seite (7)
- Spinal column (7)
- Spreading (7)
- Stahl (7)
- Steel (7)
- Stress (7)
- Traffic survey (7)
- Tragschicht (7)
- Tunnel lining (7)
- Tunnelauskleidung (7)
- Tyre (7)
- Verkehrsverflechtung (7)
- Waterproofing (7)
- Wear (7)
- Weight (7)
- Wet road (7)
- Winkel (7)
- Woman (7)
- Überholen (7)
- Activity report (6)
- Ageing (6)
- Angle (6)
- Annual average daily traffic (6)
- Anschlussstelle (6)
- Arbeitsgruppe (6)
- Arzneimittel (6)
- Asphaltoberbau (6)
- Auswahl (6)
- Bepflanzung (6)
- Bridge surfacing (6)
- Case law (6)
- Case study (6)
- Compaction (6)
- Compatibility (6)
- Contact (tyre road) (6)
- Defect (tech) (6)
- Deflection (6)
- Depot (transp) (6)
- Design (6)
- Distraction (6)
- Druck (6)
- Durchbiegung (6)
- Eindringung (6)
- Electric vehicle (6)
- Empfindlichkeit (6)
- Evakuierung (6)
- Evenness (6)
- Fahrernachschulung (6)
- Fahrzeugabstand (6)
- Failure (6)
- Fallstudie (6)
- Fiber reinforced concrete (6)
- Gas (6)
- Gesundheit (6)
- Health (6)
- Human body (6)
- Impact sled (6)
- Incident detection (6)
- India (6)
- Indien (6)
- Information management (6)
- JDTV (6)
- Knie (menschl) (6)
- Kompatibilität (6)
- Langfristig (6)
- Lenken (Fahrzeug) (6)
- Life-cycle (6)
- Long term (6)
- Mechanics (6)
- Mechanik (6)
- Medication (6)
- Menschlicher Körper (6)
- Merging traffic (6)
- Mittelwert (6)
- Nasse Straße (6)
- Network (traffic) (6)
- Nutzwertanalyse (6)
- Penetration (6)
- Platte (6)
- Portugal (6)
- Post crash (6)
- Pressure (6)
- Provisorisch (6)
- Quer (6)
- Rechtsprechung (6)
- Recidivist (6)
- Recycling (6)
- Roadbase (6)
- Schutz (6)
- Selection (6)
- Sensitivity (6)
- Shock (6)
- Slab (6)
- Speed limit (6)
- Spurrinne (6)
- Steering (process) (6)
- Straßenverkehrstechnik (6)
- Tag (24 Stunden) (6)
- Technische Vorschriften (Kraftfahrzeug) (6)
- Temporary (6)
- Theorie (6)
- Theory (6)
- Transverse (6)
- Trend (stat) (6)
- Tätigkeitsbericht (6)
- Umweltschutz (6)
- Value analysis (6)
- Variable message sign (6)
- Vehicle spacing (6)
- Verdichtung (6)
- Verkehrsnetz (6)
- Verteilung (mater) (6)
- Vorn (6)
- Vorschrifteneinhaltung (6)
- Wechselverkehrszeichen (6)
- Welding (6)
- Windschutzscheibe (6)
- Working group (6)
- Zusammensetzung (6)
- Ablenkung (psychol) (5)
- Abnutzung (5)
- Absorption (5)
- Acceleration (5)
- Accessibility (5)
- Akzeptanz (5)
- Alcohol (5)
- Alkohol (5)
- Alterung (mater) (5)
- Analyse (Math) (5)
- Animal (5)
- Arbeitsbedingungen (5)
- Aufbereitungsanlage (5)
- Aufprallschlitten (5)
- Ausführungsfehler (5)
- Average (5)
- Ballungsgebiet (5)
- Bauweise (5)
- Beschichtung (5)
- Beschilderung (5)
- Beschleunigung (5)
- Betriebsverhalten (5)
- Bottleneck (5)
- Breite (5)
- Coach (5)
- Coating (5)
- Control (5)
- Conurbation (5)
- Correlation (math, stat) (5)
- Cycling (5)
- Deformable barrier (impact test) (5)
- Depth (5)
- Diffusion (5)
- Earthworks (5)
- Economics (5)
- Einfahrt (5)
- Eingabedaten (5)
- Emission control (5)
- Emissionskontrolle (5)
- Engpass (5)
- Erdarbeiten (5)
- Ergonomics (5)
- Ergonomie (5)
- Evacuation (5)
- Exhaust aftertreatment (5)
- Expert system (5)
- Expertensystem (5)
- Fahrtüchtigkeit (5)
- Fahrzeugrückhaltesystem (5)
- Faserbewehrter Beton (5)
- Fatigue (human) (5)
- Fleet of vehicles (5)
- Frequenz (5)
- Full depth asphalt pavement (5)
- Genauigkeit (5)
- Geschwindigkeitsminderung (bauliche Elemente) (5)
- Goods transport (5)
- Haftung (jur) (5)
- Hard shoulder (5)
- Heat (5)
- In service behavior (5)
- Incident management (5)
- Input data (5)
- Installation (5)
- Itinerary (5)
- Kleintransporter (5)
- Koordinierte Signalsteuerung (5)
- Korn (5)
- Korngestuftes Mineralgemisch (5)
- Layer (5)
- Length (5)
- Liability (5)
- Linked signals (5)
- Longitudinal (5)
- Man (5)
- Mann (5)
- Metallbrücke (5)
- Minimum (5)
- Mix design (5)
- Mixing plant (5)
- Model (non math) (5)
- Moisture content (5)
- Müdigkeit (5)
- Naturschutz (5)
- Netherlands (5)
- Niederlande (5)
- Non destructive testing (5)
- Overlapping (5)
- Oxid (5)
- Oxide (5)
- Particle (5)
- Pavement management system (5)
- Porosity (5)
- Private transport (5)
- Prototyp (5)
- Prototype (5)
- Public relations (5)
- Querprofil (5)
- Radfahren (5)
- Rail traffic (5)
- Recording (5)
- Recycling (mater) (5)
- Regression analysis (5)
- Regressionsanalyse (5)
- Reisebus (5)
- Reiseweg (5)
- Road (5)
- Rural highway (5)
- Schallpegel (5)
- Schicht (5)
- Schienenverkehr (5)
- Schub (5)
- Schweissen (5)
- Schweiz (5)
- Schwingung (5)
- Security (5)
- Seitenstreifen (befestigt) (5)
- Service area (5)
- Side (5)
- Signalization (5)
- Sociology (5)
- Sound level (5)
- Soziologie (5)
- Spalling (5)
- Spannglied (5)
- Spannung (mater) (5)
- Specification (Standard) (5)
- Straßenseitenfläche (5)
- Stress (in material) (5)
- Störfallmanagement (5)
- Switzerland (5)
- Systemanalyse (5)
- Systems analysis (5)
- Telecommunication (5)
- Telekommunikation (5)
- Telephone (5)
- Tendon (5)
- Tiefe (5)
- Tier (5)
- Traffic congestion (5)
- Transverse profile (5)
- Unfallfolgemaßnahme (5)
- Vehicle actuated (5)
- Vehicle restraint system (5)
- Verbot (5)
- Verkehrsabhängig (5)
- Verkehrsmittel (5)
- Verkehrsstauung (5)
- Verschiebung (5)
- Versuchspuppe (5)
- Vibration (5)
- Viscosity (5)
- Viskosität (5)
- Wassergehalt (5)
- Width (5)
- Wirtschaft (5)
- Working conditions (5)
- Wärme (5)
- Zeitreihe (stat) (5)
- Zerstörungsfreie Prüfung (5)
- Öffentlichkeitsarbeit (5)
- Abdomen (4)
- Abplatzen (4)
- Accident proneness (4)
- Achslast (4)
- Adhesion (4)
- Adhäsion (4)
- Adult (4)
- Aggression (psychol) (4)
- Aircraft (4)
- Alcohol test (4)
- Alkoholtest (4)
- Alternative (4)
- Alternative energy (4)
- Aufzeichnung (4)
- Autonomes Fahren (4)
- Autonomous driving (4)
- Axle load (4)
- Black ice (4)
- Blech (4)
- Brücken Management System (4)
- Camera (4)
- Carbon dioxide (4)
- Collision test (veh) (4)
- Construction method (4)
- Continuously graded aggregate (4)
- Damping (4)
- Datenübertragung (telekom) (4)
- Day (24 hour period) (4)
- Deflectograph (4)
- Deformierbare Barriere (Anpralltest) (4)
- Demand (econ) (4)
- Design (Overall design) (4)
- Dispersion (stat) (4)
- Distribution (gen) (4)
- Drainage (4)
- Dreidimensional (4)
- Driving instructor (4)
- Dränasphalt (4)
- Durchbiegungsmesser (4)
- Dämpfung (4)
- EU directive (4)
- Electronics (4)
- Elektronik (4)
- Energy (4)
- Entrance (4)
- Entwässerung (4)
- Environment protection (4)
- Erwachsener (4)
- Estimation (4)
- Fahrdatenschreiber (4)
- Fahrlehrer (4)
- Fahrzeugteil (Sicherheit) (4)
- Force (4)
- Frost (4)
- Fuel consumption (4)
- Fugenfüllung (4)
- Gefahrenabwehr (4)
- Gemisch (4)
- Gesetzesdurchführung (4)
- Gewicht (4)
- Glatteis (4)
- Ground water (4)
- Group analysis (test) (4)
- Grundwasser (4)
- Heavy (4)
- Hohlraumgehalt (4)
- Individueller Verkehr (4)
- Intersection (4)
- Inventar (4)
- Inventory (4)
- Kamera (4)
- Kleidung (4)
- Kohlenmonoxid (4)
- Korrelation (math, stat) (4)
- Kraft (4)
- LKW (4)
- Lebensdauer (4)
- Links (4)
- Luftfahrzeug (4)
- Länge (4)
- Lärmschutzwand (4)
- Market (4)
- Markt (4)
- Membrane (4)
- Mixture (4)
- Montage (4)
- Motivation (4)
- Motorisierungsgrad (4)
- Movement (4)
- Nachfrage (4)
- Nanotechnologie (4)
- Nanotechnology (4)
- Nature protection (4)
- Noise barrier (4)
- Occupant (veh) (4)
- Orthotrope Platte (4)
- Parking pricing (4)
- Parkraumbewirtschaftung (4)
- Polymer (4)
- Porous asphalt (4)
- Prestressing (4)
- Probe (4)
- Prohibition (4)
- Radar (4)
- Radio (4)
- Rechenprogramm (4)
- Reflectivity (4)
- Reflexionsgrad (4)
- Regierung (Staat) (4)
- Reinigung (4)
- Reisedauer (4)
- Responsibility (4)
- Ringanalyse (4)
- Roadside (4)
- Rock (4)
- Rundfunk (4)
- Rücksichtslosigkeit (4)
- Scheren (4)
- Schlag (4)
- Schrägseilbrücke (4)
- Schweden (4)
- Schwer (4)
- Seepage (4)
- Sehvermögen (4)
- Sheet (metal) (4)
- Sickerung (4)
- Spaltzugfestigkeitsversuch (4)
- Speed control (struct elem) (4)
- Splitting tensile test (4)
- Stand der Technik (Bericht) (4)
- Standardabweichung (4)
- State of the art report (4)
- Stayed girder bridge (4)
- Straßenbahn (4)
- Störfallentdeckung (4)
- Tank Rast Anlage (4)
- Telefon (4)
- Tension (4)
- Three dimensional (4)
- Titan (4)
- Titanium (4)
- Tram (4)
- Transport mode (4)
- Turn (4)
- Ultraschall (4)
- Ultrasonic (4)
- Umweltverträglichkeitsprüfung (4)
- Unfallneigung (4)
- Unterleib (4)
- Vehicle ownership (4)
- Verantwortung (4)
- Verteilung (allg) (4)
- Vision (4)
- Visual display (4)
- Vorspannung (4)
- Warnung (4)
- Windscreen (veh) (4)
- Wirkungsanalyse (4)
- Zug (mech) (4)
- Abgasnachbehandlung (3)
- Abkommen von der Fahrbahn (Unfall) (3)
- Addiction (3)
- Advanced driver assistance system (3)
- Aggressiveness (psychol) (3)
- Alcali silica reaction (3)
- Alkali-Zuschlag-Reaktion (3)
- Alternativ (3)
- Anpassung (allg) (3)
- Antrieb (tech) (3)
- Arterial highway (3)
- Asphalt (3)
- Audiovisual (3)
- Audiovisuell (3)
- Auslaugung (3)
- Ausländer (3)
- Ausschreibung (3)
- Australia (3)
- Australien (3)
- Automation (3)
- Autonomes Fahrzeug (3)
- Autonomous vehicle (3)
- Außerortsstraße (3)
- Befreiung (Bergung) (3)
- Bein (3)
- Betriebsablauf (Transport) (3)
- Bibliographie (3)
- Bibliography (3)
- Blickfeld (3)
- Bodenmechanik (3)
- Bremsweg (3)
- Bridge management system (3)
- Budget (3)
- Cable (3)
- Calibration (3)
- Capacity (Road, footway) (3)
- Car park (3)
- Carbon monoxide (3)
- Chippings (3)
- Chlorid (3)
- Cleaning (3)
- Clothing (3)
- Corrosion (3)
- Costs (3)
- Crash test (3)
- Czech Republic (3)
- Data collection (3)
- Data exchange (3)
- Data security (3)
- Data transmission (telecom) (3)
- Datenaustausch (3)
- Datensicherheit (3)
- Deterioration (3)
- Diesel engine (3)
- Driving license (3)
- EU-Richtlinie (3)
- Echtzeit (3)
- Ecological engineering (3)
- Effectiveness (3)
- Elektronische Fahrhilfe (3)
- Emulsion (3)
- Energie (3)
- Enforcement (law) (3)
- Environmental protection (3)
- European Union (3)
- Event data recorder (road vehicle) (3)
- Extern (3)
- Extrication (3)
- Fahrassistenzsystem (3)
- Fahrerweiterbildung (3)
- Fahrzeugteile (3)
- Fels (3)
- Festzeitsteuerung (Lichtsignal) (3)
- Field of vision (3)
- Fixed time (signals) (3)
- Folie (3)
- Foreigner (3)
- Form (3)
- Fracht (3)
- Freight (3)
- Frost Tau Wechsel (3)
- Fuel (3)
- Fuhrpark (3)
- Fußgängerbereich (3)
- Gefahr (3)
- Gegenverkehr (3)
- Glue (3)
- Gravel (3)
- Gravity (3)
- Greenhouse effect (3)
- Grooving (3)
- Gussasphalt (3)
- Hazard (3)
- Head restraint (3)
- Headlamp (3)
- High performance concrete (3)
- Highway capacity (3)
- In Bewegung (3)
- Ingenieurbiologie (3)
- Interactive model (3)
- Interaktives Modell (3)
- International road (3)
- Internationale Straße (3)
- Italien (3)
- Italy (3)
- Joint sealing (3)
- Journey time (3)
- Journey to school (3)
- Kies (3)
- Klebstoff (3)
- Kohlendioxid (3)
- Kontakt Reifen Straße (3)
- Kopfstütze (3)
- Korea (Süd) (Demokratische Republik) (3)
- Kornverteilung (3)
- Korrosion (3)
- Kosten Nutzen Vergleich (3)
- Kraftstoffverbrauch (3)
- Kreisverkehrsplatz (3)
- Laboratory (3)
- Landscaping (3)
- Landschaftsgestaltung (3)
- Leaching (3)
- Lecture (3)
- Longitudinal profile (3)
- Längsprofil (3)
- Lüftung (3)
- Marketing (3)
- Massenunfall (3)
- Meeting traffic (3)
- Methode der finite Elemente (3)
- Mobility management (3)
- Mobilitätsmanagement (3)
- Mobiltelefon (3)
- Motor (3)
- Moving (3)
- Non destructive (3)
- Nummer (3)
- On the left (3)
- Optische Anzeige (3)
- Organization (Association) (3)
- Outside (3)
- Parken (3)
- Parkfläche (3)
- Parking (3)
- Particle size distribution (3)
- Partnerschaft (3)
- Partnership (3)
- Passenger (3)
- Passive restraint system (3)
- Pedestrian crossing (3)
- Pedestrian precinct (3)
- Physiologie (3)
- Physiology (3)
- Plasticity (3)
- Plastizität (3)
- Police (3)
- Polizei (3)
- Posture (3)
- Propulsion (3)
- Public private partnership (3)
- Qualitätsmanagementsystem (3)
- Region (3)
- Regional planning (3)
- Republic of Korea (3)
- Residual (3)
- Rest (3)
- Rheologie (3)
- Rheology (3)
- Rillenherstellung (3)
- Risikoverhalten (3)
- Robot (3)
- Roboter (3)
- Roundabout (3)
- Route guidance (3)
- Run off the road (accid) (3)
- Rutting (3)
- Rutting (wheel) (3)
- Scheinwerfer (3)
- Schulweg (3)
- Schwerkraft (3)
- Shotcrete (3)
- Sichtweite (3)
- Soil mechanics (3)
- Spain (3)
- Spanien (3)
- Spannungsanalyse (3)
- Splitt (3)
- Standard test run (3)
- Steife (Brücke) (3)
- Steuerung (3)
- Stiffener (Bridge) (3)
- Stochastic process (3)
- Stochastischer Prozess (3)
- Stress analysis (3)
- Subsoil (3)
- Süchtigkeit (3)
- Texture (3)
- Tourism (3)
- Tourismus (3)
- Toxicity (3)
- Toxizität (3)
- Traffic assignment (3)
- Traffic signal control systems (3)
- Transport (3)
- Transport operator (3)
- Transportunternehmen (3)
- Treibhauseffekt (3)
- Triaxial (3)
- Tschechische Republik (3)
- Turning (3)
- Umgehungsstraße (3)
- Umweltverschmutzung (3)
- United kingdom (3)
- Untergrund (3)
- Vehicle safety device (3)
- Ventilation (3)
- Verkehrstechnik (3)
- Verstärkung (Brücke) (3)
- Visibility distance (3)
- Vorne (3)
- Warning (3)
- Wissen (3)
- Zerstörungsfrei (3)
- Zielführungssystem (3)
- Zugänglichkeit (3)
- Überlappung (3)
- Abrieb (2)
- Abstumpfen (2)
- Access road (2)
- Accident severity (2)
- Accuracy (2)
- Admixture (2)
- Advanced vehicle control system (2)
- Air (2)
- Akustisches Signal (2)
- Approximation (2)
- Arm (human) (2)
- Auftauen (2)
- Ausdehnung (mater) (2)
- Ausfahrt (2)
- Automatische Notbremsung (2)
- Automobile (2)
- Automobiles (2)
- Autonomous emergency braking (2)
- Barrierefrei (2)
- Baumusterzulassung (2)
- Bauwerksmonitoring (2)
- Beruf (2)
- Bestrafung (2)
- Betriebskosten (2)
- Blutkreislauf (2)
- Body (car) (2)
- Brain (2)
- Braking distance (2)
- Brennbarkeit (2)
- Brückenüberbau (2)
- Bypass (2)
- CBR (2)
- Cadaver (2)
- California bearing ratio (2)
- Cantilever (2)
- Capacity (traffic network) (2)
- Car sharing (2)
- Carbonate (2)
- Catalytic converter (2)
- Chart (2)
- Chloride (2)
- Chromatographie (2)
- Chromatography (2)
- Circulation (blood) (2)
- Climate change (2)
- Combustion (2)
- Competition (2)
- Components of the car (2)
- Components of the vehicle (2)
- Compression (2)
- Concentration (chem.) (2)
- Construction management (2)
- Crash Test (2)
- Crash victim (2)
- Crashtest (2)
- Critical path method (2)
- Crossing the road (2)
- Culvert (2)
- Cut and cover (2)
- Data base (2)
- Dauer (Zeit) (2)
- Day (24 hours period) (2)
- Deceleration (2)
- Decke (straße) (2)
- Deutschalnd (2)
- Dicke (2)
- Dieselmotor (2)
- Digital computer (2)
- Digital image processing (2)
- Digital map (2)
- Digitale Karte (2)
- Digitalrechner (2)
- Dimension (2)
- Disablement (2)
- Driver experience (2)
- Driver license (2)
- Ductility (2)
- Duktilität (2)
- Durchgangsverkehr (2)
- Durchlass (2)
- Durchsichtigkeit (2)
- Dust (2)
- Ecosystem (2)
- Edge (2)
- Eichung (2)
- Elastizitätsmodul (2)
- Electric bicycle (2)
- Electricity (2)
- Electronic driving aid (2)
- Elektrizität (2)
- Elektrofahrrad (2)
- Energieeinsparung (2)
- Energy conservation (2)
- Entschädigung (2)
- Environmental impact analysis (2)
- Erneuerbare Energie (2)
- Eu (2)
- Evaluation (Assessment) (2)
- Eveness (2)
- Exit (2)
- Expansion (2)
- External effect (2)
- Externer Effekt (2)
- Fahrbahnüberquerung (2)
- Fahrererfahrung (2)
- Fahrzeugflotte (2)
- Fahrzeugortung (2)
- Fahrzyklus (2)
- Farbe (2)
- Faserbeton (2)
- Fein (mater) (2)
- Fernsteuerung (2)
- Fine (mater) (2)
- Finland (2)
- Finnland (2)
- Flammability (2)
- Flow (fluid) (2)
- Foot (not a measure) (2)
- Forschungsinstitut (2)
- Freezing thawing cycle (2)
- Freight traffic (2)
- Freight transportation (2)
- Freizeit (2)
- Frost damage (2)
- Frostschaden (2)
- Full scale (2)
- Fuß (2)
- Fußgängerüberweg (2)
- Gebiet (2)
- Gebirge (2)
- Gehirn (2)
- Gehweg (2)
- Geländefahrzeug (2)
- Geographical information system (2)
- Geographisches Informationssystem (2)
- Geologie (2)
- Geomembran (2)
- Geomembrane (2)
- Georadar (2)
- Geotextil (2)
- Geotextile (2)
- Geradeausverkehr (2)
- Ground penetrating radar (2)
- Gütertransport (2)
- Halide (2)
- Haltestelle (2)
- Harmonisation (2)
- Height (2)
- Heissmischgut (2)
- Hinten (2)
- Hochfester Beton (2)
- Hot coated material (2)
- Hour (2)
- Human machine interface (2)
- Hybrid vehicle (2)
- Hybridfahrzeug (2)
- Hydraulic properties (2)
- Hydraulische Eigenschaften (2)
- Hydrocarbon (2)
- Häufigkeit (2)
- Höhe (2)
- Impact study (environment) (2)
- Improvements (2)
- In service behaviour (2)
- Indemnity (2)
- Industrie (2)
- Industry (2)
- Information (documentation) (2)
- Information display systems (2)
- Insurance (2)
- Intelligence quotient (2)
- Intelligenzquotient (2)
- Inter urban (2)
- Intercity (2)
- Interface (2)
- Intermodal terminals (2)
- Internet (2)
- Interoperability (2)
- Interoperabilität (2)
- Investition (2)
- Investment (2)
- Jahreszeit (2)
- Kapazität (Verkehrsnetz) (2)
- Karbonatisierung (2)
- Karosserie (2)
- Klimawandel (2)
- Kohlenwasserstoff (2)
- Kontakt Reifen-Straße (2)
- Kraftstoff (2)
- Kragarm (2)
- Kreuzung (2)
- Körperstellung (2)
- Learning (2)
- Leichnam (2)
- Leuchtdichte (2)
- Lichtstärke (2)
- Light intensity (2)
- Longer and heavier vehicle (2)
- Loss (2)
- Luft (2)
- Luminance (2)
- Längs (2)
- Magnetism (2)
- Magnetismus (2)
- Management (2)
- Masse (2)
- Materialveränderung (allg) (2)
- Matrix (2)
- Mensch Maschine Schnittstelle (2)
- Metal (2)
- Metall (2)
- Micro (2)
- Mikro (2)
- Mobile phone (2)
- Mobility (pers) (2)
- Mobilitätserhebung (2)
- Modell (not math) (2)
- Modulus of elasticity (2)
- Mountain (2)
- Multiple collision (2)
- Netzplantechnik (2)
- Non skid treatment (2)
- Normalgröße (2)
- Näherung (math) (2)
- Offene Bauweise (2)
- Official approval (2)
- Operating costs (2)
- Operations (Transp network) (2)
- Organisch (2)
- Output (2)
- Oxidation (2)
- PVC (2)
- Parking place (one veh only) (2)
- Parkstand (einzeln) (2)
- Passenger transport (2)
- Penalty (2)
- Personenbeförderung (2)
- Personenschaden (2)
- Pflasterstein (2)
- Plate bearing test (2)
- Plattendruckversuch (2)
- Polyolefin (2)
- Polyvinylchloride (2)
- Polyvinylhydrocarbon (2)
- Portable (2)
- Printed publicity (2)
- Privatisierung (2)
- Probekörper (2)
- Procurement (2)
- Prüfstand (2)
- Psychose (2)
- Psychosis (2)
- Public participation (2)
- Pylon (2)
- Pädagogik (2)
- Quality management system (2)
- Quartz (2)
- Quarz (2)
- Rad (2)
- Radius (2)
- Real time (2)
- Rear (2)
- Rechts (2)
- Recreation (2)
- Red light (2)
- Reflectorized material (2)
- Reflexstoffe (2)
- Regierung (staat) (2)
- Regionalplanung (2)
- Reifenprofil (2)
- Remote control (2)
- Report (2)
- Restraint system (2)
- Retaining wall (2)
- Road heating (2)
- Rolled asphalt (2)
- Roller (2)
- Rounded aggregate (2)
- Rumble strip (2)
- Rundkorn (2)
- Safety coefficient (2)
- Salt (chem) (2)
- Salz (chem) (2)
- Sand (2)
- Schleudertrauma (2)
- Schriftwerbung (2)
- Schwinden (2)
- Sealing coat (on top of the surfacing) (2)
- Season (2)
- Seil (2)
- Seminar (2)
- Sett (2)
- Settlement (2)
- Setzung (2)
- Shape (2)
- Shrinkage (2)
- Sicherheitsbeiwert (2)
- Significance (2)
- Signifikanz (2)
- Solution (chem) (2)
- Speeding (2)
- Sperrsignal (2)
- Sport utility vehicle (2)
- Staat (Regierung) (2)
- Stability (Mechanics) (2)
- Stated preference (2)
- Statics (2)
- Statik (2)
- Staub (2)
- Straight ahead (traffic) (2)
- Straßenheizung (2)
- Structural health monitoring (2)
- Strömung (2)
- Stunde (2)
- Stützwand (2)
- Superstructure (bridge) (2)
- Suspension (veh) (2)
- Sweden (2)
- Technische Überwachung (allg) (2)
- Temperature measurement (2)
- Temperaturmessung (2)
- Test Method (2)
- Test procedure (2)
- Test procedures (2)
- Thaw (2)
- Thickness (2)
- Through traffic (2)
- Torkretbeton (2)
- Traction control (2)
- Traffic Flow (2)
- Traffic counts (2)
- Tragbar (2)
- Transparent (2)
- Trapezförmiger Träger (2)
- Trapezoidal beam (2)
- Trennfunktion (Straße) (2)
- Tunnels (2)
- Two (2)
- Tyre tread (2)
- Ultimate load design (2)
- Underride prevention (2)
- Unfallopfer (2)
- United States (2)
- Unterfahrschutz (2)
- Urban development (2)
- Variance analysis (2)
- Varianzanalyse (2)
- Vehicle safety (2)
- Vehicles (2)
- Verbrennung (2)
- Verkehrsfreigabe (2)
- Versicherung (2)
- Versiegelung (2)
- Verzögerung (2)
- Visualisation (2)
- Visualisierung (2)
- Vorlesung (2)
- Walze (2)
- Warning systems (2)
- Wave (2)
- Weathering (2)
- Week (2)
- Weekday (2)
- Wegewahl (2)
- Welle (2)
- Werktag (2)
- Wettbewerb (2)
- Wheel (2)
- Whiplash injury (2)
- Winter (2)
- Woche (2)
- Zahl (2)
- Zufahrtsstraße (2)
- Zusammendrückung (2)
- Zusatzmittel (2)
- Zwei (2)
- Öffentlich Private Partnerschaft (2)
- Öffentliche Beteiligung (2)
- Ökosystem (2)
- Überdeckung (2)
- (menschl) (1)
- AADT (1)
- Abblättern (1)
- Abfallbewirtschaftung (1)
- Abfluss (1)
- Abgaben (1)
- Ability (road user) (1)
- Abkommen von der Fahrbahn (1)
- Ablagerung (1)
- Ablenkung (1)
- Ablösung (Bindemittel) (1)
- Abstandsregeltempomat (1)
- Abutment (1)
- Acceptability (1)
- Accident data (1)
- Accident prone location (1)
- Achse (math) (1)
- Active safety (1)
- Active safety system; Automatic; Brake; Car; Collision avoidance system; Conference; Driver assistance system; Germany; Impact test (veh); Rear end collision; Severity (accid (1)
- Adaptive cruise control (1)
- Adaptive cruise controll (1)
- Aerodynamics (1)
- Aerodynamik (1)
- Aesthetics (1)
- Aethanol (1)
- Aged people (1)
- Aggression (psycho) (1)
- Air entrained concrete (1)
- Air quality management (1)
- Air traffic control (1)
- Air transport (1)
- Airbag (restraint system) (1)
- Aktive Sicherheit (1)
- Akustik (1)
- Alcolock (1)
- Alertness (1)
- Alkali Zuschlag Reaktion (1)
- Alkali silica reaction (1)
- Alternative Energie (1)
- Alterung (1)
- Aluminat (1)
- Aluminate (1)
- Amber light (1)
- Analyse (1)
- Analyses (math) (1)
- Anchorage (1)
- Angles (1)
- Angularity (1)
- Anhänger (1)
- Ankündigung (1)
- Annual report (1)
- Anordnung (1)
- Anthropmetric dummy (1)
- Anthropometrie (1)
- Anthropometry (1)
- Anti blocking device (1)
- Antiblockiereinrichtung; Bewertung (1)
- Antiblockiersystem (1)
- Aptitude (1)
- Arbeitsplatz (1)
- Arch (structural) (1)
- Arch bridge (1)
- Area traffic control (1)
- Arm (1)
- Arm (menschl) (1)
- Aromatic compounds (1)
- Aromatische Verbindungen (1)
- Arrester bed (1)
- Arzt (1)
- Asphaltmastix (1)
- Asphaltstraße (1)
- Atem (1)
- Atives Sicherheitssystem (1)
- Attitude (1)
- Audible warning devices (1)
- Auffharunfall (1)
- Auflager (Brücke) (1)
- Aufprall (1)
- Auftaumittel ; Berechnung (1)
- Aufzeichung (1)
- Aural signal (1)
- Ausbildung (1)
- Ausbreitung (1)
- Aushub (1)
- Auspuff (1)
- Automatic vehicle identification (1)
- Automatic vehicle location (1)
- Automatische Fahrzeugidentifikation (1)
- Autotür (1)
- Außenseite (1)
- Axis (1)
- Back (human) (1)
- Barrier function (road) (1)
- Basalt (1)
- Basecourse (1)
- Batterie (1)
- Battery (1)
- Bauausführung (1)
- Baum (1)
- Bearing (bridge) (1)
- Befahrung gegen Einbahnrichtung (1)
- Begrenzungsleuchten (1)
- Behavior (1)
- Bein [menschl] (1)
- Benzin (1)
- Berechnung d Straßenoberbaus (1)
- Berufsausbildung (1)
- Bestand (1)
- Bestandsaufnahme (1)
- Beton ; Betonstraße (Oberbau) (1)
- Betonfertigteil (1)
- Bezahlung (1)
- Bicyclist (1)
- Bildanalyse (1)
- Bildschirm (1)
- Bindemittelgehalt (1)
- Binder content (1)
- Binderschicht (1)
- Biomasse (1)
- Bitumenemulsion (1)
- Bituminous mixtures (1)
- Blasting (1)
- Blendung (1)
- Boarding time (1)
- Bodenhaftung (1)
- Bogenbrücke (1)
- Bohrkern (1)
- Bone (1)
- Bordstein (1)
- Box grider (1)
- Brake lining (1)
- Brasilien (1)
- Brazil (1)
- Breaking (1)
- Breath (1)
- Bremsbelag (1)
- Bridge " Composite bridge (1)
- Bridge Management System (1)
- Brittleness (1)
- Bus stop (1)
- Business district (1)
- By product (1)
- Bypass (loop road) (1)
- Böschung (1)
- Böschungsbefestigung (1)
- Calcium (1)
- Capacity (veh) (1)
- Car door (1)
- Caron monoxide (1)
- Catchment area (1)
- Certification (1)
- Chassis (1)
- Chemie (1)
- Chemistry (1)
- Chest (1)
- Children (1)
- Cinematography (1)
- Clay (1)
- Climate (1)
- Coarse aggregate (1)
- Coefficient (1)
- Cognitive impairment (1)
- Cohesion (1)
- Cold (1)
- Cold coated material (1)
- Color (1)
- Colour (1)
- Colthing (1)
- Compliance (1)
- Compressibility (1)
- Computation (1)
- Computer (1)
- Computerspiel (1)
- Conference; Germany; Injury; Medical examination; Spinal column; X ray (1)
- Confiscation (driving licence) (1)
- Congestion (traffic) (1)
- Contact (tyre (1)
- Continously graded aggregate (1)
- Contractor (1)
- Contraflow traffic (1)
- Cooling (mater) (1)
- Cooperative intelligent transport system (1)
- Core (Boring) (1)
- Correction (1)
- Correlation (1)
- Correlation (math (1)
- Coupling (1)
- Creep (mater) (1)
- Crimes (1)
- Cross road (1)
- Cross roads (1)
- Cross sections (1)
- Cross-border traffic (1)
- Crushed stone (1)
- Curing (concrete) (1)
- Curve (math) (1)
- Customer (1)
- Cybernetics (1)
- Cycle (traffic signals) (1)
- Cycle car (1)
- Damm (1)
- Data file (1)
- Data files (1)
- Data protection (1)
- Data transmission (telekom) (1)
- Datei (1)
- Datenanalyse (1)
- Datenschutz (1)
- Datenübertragung (Telekom) (1)
- Dauer (1)
- Day (1)
- Daytime running light (1)
- Decke [Straße] (1)
- Deckenerneuerung (1)
- Deformierte Barriere (Anpralltest) (1)
- Degree of curvature (1)
- Degree of saturation (mater) (1)
- Delivery service (1)
- Demografie (1)
- Demography (1)
- Denmark (1)
- Density (1)
- Deposit (natural) (1)
- Deutschland ; Entwicklung (1)
- Deutschland ; Fahrtauglichkeit (1)
- Diagnostik (1)
- Dichte (1)
- Digital Computer (1)
- Displacement (1)
- Dissertation (1)
- Dowel (1)
- Drei (1)
- Driver improvement programs (1)
- Driver in formation (1)
- Driver rehabilitation (1)
- Driver taining (1)
- Driving (veh) ; Evaluation (1)
- Driving aid (electronic) (1)
- Driving simulator (1)
- Dryness (1)
- Dtetection (1)
- Durchmesser (1)
- Dusk (1)
- Dynamic penetration test (1)
- Dämmerung (1)
- Dänemark (1)
- Dübel (1)
- EU Richtlinie (1)
- Economics of transport (1)
- Effizienz (1)
- Einkommensschwache Schichten (1)
- Einsteigezeit (1)
- Einzugsgebiet (1)
- Ejection (1)
- Elasticity (1)
- Elastizität (1)
- Electroencephalography (1)
- Elektroencephalographie (1)
- Elektronisches Stabilitätsprogram (1)
- Embankment (1)
- Emergency exit (1)
- Emergency medical aid (1)
- Energieverbrauch (1)
- Enteignung (1)
- Enteisung (1)
- Entgleisung (Zug) (1)
- Environmental compatibility (1)
- Epilepsie (1)
- Epilepsy (1)
- Erkennbarkeit (1)
- Ermüdung (Mater) (1)
- Ernährung (1)
- Ersatzdroge (1)
- Erschließung (1)
- Ethanol (1)
- Evaluation assessment (1)
- Event data recorder (Road vehicle) (1)
- Excavation (1)
- Excavation (process) (1)
- Exclusive right of way (1)
- Exhaust pipe (1)
- Exhibition (1)
- Expanded material (1)
- Expandierter Baustoff (1)
- Explosion (1)
- Expressway (1)
- Expropriation (1)
- Extraction (1)
- Extraktion (1)
- Face (human) (1)
- Fachwerk (1)
- Facility (1)
- Fahrbare Barriere (1)
- Fahrer ; Fahrerassistenzsystem (1)
- Fahrerfahrung (1)
- Fahrerinformationen (1)
- Fahrernacherziehung (1)
- Fahrgastinformation (1)
- Fahrschule (1)
- Fahrwerk (1)
- Fahrzeugdach (1)
- Fahrzeugfuehrung (1)
- Fahrzeugmarkierung (1)
- Fahrzeugwartung (1)
- Falschfahren (1)
- Fatigue (mech) (1)
- Fear (1)
- Federung (1)
- Fehlstelle (1)
- Feldspat (1)
- Feldversuch (1)
- Felsmechanik (1)
- Felspar (1)
- Fence (1)
- Fernsehen (1)
- Fernverkehrsstrasse (1)
- Fernverkehrstraße (1)
- Feuchte (1)
- Fibre reinforced concrete (1)
- Field test (1)
- Datei (1)
- Filler (1)
- Film (Filmtechnik) (1)
- Flooding (1)
- Flugasche (1)
- Flugsicherung (1)
- Fluid dynamics (1)
- Fly ash (1)
- Flächennutzung (1)
- Flächennutzungsplan (1)
- Flächentragwerk (1)
- Flüssigkeit (1)
- Foamed bitumen (1)
- Fog (1)
- Food (1)
- Footway (1)
- Forschungsprojekt (1)
- Fortbildung (1)
- Fotoelektrisch (1)
- Foundation (1)
- Four wheel drive (1)
- Frame (1)
- Freeways (1)
- Freeze thaw durability (1)
- Freigabesignal (1)
- Freight transport (1)
- Friction (1)
- Frost blanket (1)
- Frostschutzschicht (1)
- Fruchtsaft (1)
- Fruit (1)
- Fruit juice (1)
- Fuel tank (1)
- Furcht (1)
- Fussgänger (1)
- Fuzzy Logik (1)
- Fuzzy logic (1)
- Fußgängerueberweg (1)
- Führerscheinentzug (1)
- Füller (1)
- Gabbro (1)
- Gabion (1)
- Gabione (1)
- Garantie (1)
- Gebrochenes Gestein (1)
- Gefahrguttransport (1)
- Gefälle (1)
- Gelenk (1)
- Generated traffic (1)
- Geografisches Information System (1)
- Geographic information system (1)
- Geometry (shape) (1)
- Geophysic (1)
- Geophysik (1)
- Gerade (Straße) (1)
- Germany ; Injury (1)
- Germany Inventory (1)
- Geschlechtsspezifisch (1)
- Geschäftsviertel (1)
- Gesicht (1)
- Gesteinskörnung (1)
- Gewinnung (1)
- Gewölbe (1)
- Glare (1)
- Gleichbehandlung (1)
- Global Positioning System (1)
- Globales Positionierungssystem (1)
- Gradient (1)
- Grafische Darstellung (1)
- Graphische Darstellung (1)
- Green light (1)
- Greenhouse gas (1)
- Grenze (1)
- Grenzfläche (1)
- Grenzverkehr (1)
- Großveranstaltung (1)
- Grunderwerb (1)
- Gründung (1)
- Guarantee (1)
- Guardrail (1)
- Guidance (1)
- Halogen (1)
- Halogene (1)
- Haltebucht (1)
- Halteverbot (1)
- Hand (1)
- Hanger (1)
- Haptisch (1)
- Harmonisierung (1)
- Hazardous material (1)
- Head (human) (1)
- Hearing (1)
- Heavy metal (1)
- Hell (1)
- Herausschleudern (1)
- Herstelllung (1)
- Hindernis (1)
- Hinge (1)
- Hip (human) (1)
- Hochleistungsbeton (1)
- Hohlkastenträger (1)
- Hohlprofil (1)
- Holz (1)
- Homogeneity (1)
- Homogenität (1)
- Horizontal (1)
- Hospitsl (1)
- Hydraulics (fluid) (1)
- Hydraulik (1)
- Hydrophob (1)
- Hydrophobic (1)
- Hängebrücke (1)
- Hänger (1)
- Hörvermögen (1)
- Hüfte (1)
- Hüfte (menschl) (1)
- Hüllrohr (1)
- Image analysis (1)
- Image generation (1)
- Impact (collision) (1)
- Impregnation (1)
- Imprägnierung (1)
- Industrierückstand (1)
- Inertia reel safety belt (1)
- Infotainment System (1)
- Infotainment system (1)
- Infrastructure (1)
- Injection (Materials) (1)
- Injection (mater) (1)
- Injektion (mater) (1)
- Inpact study (1)
- Instruments for measuring fluid properties or phenomena (1)
- Intelligent Transport System (1)
- Intelligentes Bauwerk (1)
- Intelligentes Verkehrssystem (1)
- International borders (1)
- Ireland (1)
- Irland (1)
- Jahresbericht (1)
- Jdtv (1)
- Kabel (1)
- Kalibrierung (1)
- Kalk (1)
- Kaltmischgut (1)
- Kapazität (Fahrzeug) (1)
- Karte (1)
- Katalysator (1)
- Kerb (1)
- Kerbeffekt (1)
- Kleinwagen (1)
- Klima (1)
- Knie (1)
- Knochen (1)
- Knoten ohne Signalsteuerung (1)
- Knotenpunkt ; Landstraße ; Lkw (1)
- Koeffizient (1)
- Kognitive Beeinträchtigung (1)
- Kohäsion (1)
- Kontakt-Reifen-Straße (1)
- Konzentration (1)
- Kooperatives System (ITS) (1)
- Kopf (menschl) (1)
- Korea (Süd) (1)
- Korrektur (1)
- Korrelation (math (1)
- Korrelation [math (1)
- Korrelation(Math (1)
- Kraftfahrzeug (1)
- Kraftstofftank (1)
- Krankenfahrstuhl (1)
- Kriechen (1)
- Krümmung (1)
- Kunde (1)
- Kupplung (1)
- Kurs (Vorlesung) (1)
- Kurve (math) (1)
- Kälte (1)
- Körperhaltung (1)
- Kühlung (mater) (1)
- Ladungssicherung (1)
- Land acquisition (1)
- Land use (1)
- Landslide (1)
- Lang Lkw (1)
- Lang-Lkw (1)
- Lantern (1)
- Lap strap (1)
- Lateral (1)
- Lateral collision (1)
- Lattice (1)
- Law enforcement (1)
- Leasing (1)
- Leistungsfähigkeit (Allg.) (1)
- Leitsystem (1)
- Lernen (1)
- Level of Service (1)
- Lidschlag (1)
- Lieferung (1)
- Light (colour) (1)
- Light commercial vehicle (1)
- Lighting (street) (1)
- Lime (1)
- Line (transp) (1)
- Linie (öff Verkehr) (1)
- Liquid (1)
- Literaturstudie (1)
- Load fastening (1)
- Loads (1)
- Lockerboden (1)
- Logistics (1)
- Logistik (1)
- Los Angeles Versuch (1)
- Los Angeles test (1)
- Low income (1)
- Low traffic road (1)
- Luftporenbeton (1)
- Luftreinhaltung (1)
- Lufttransport (1)
- Ländliches Gebiet (1)
- Löslich (chem) (1)
- Lösung (chem) (1)
- Macro (1)
- Macrotexture (1)
- Main Road (1)
- Makro (1)
- Makrotextur (1)
- Malaysia (1)
- Manuell (1)
- Map (1)
- Maritime transport (1)
- Mass spectrometry (1)
- Massenspektrometrie (1)
- Mastic asphalt (1)
- Materialveraenderung (allg) (1)
- Mathematical Model (1)
- Mathematical analysis (1)
- Mauer (1)
- Mean (math) (1)
- Measurment (1)
- Mehrspurig ; Straßenentwurf (1)
- Membran (1)
- Merging (1)
- Text (1)
- Mesurement (1)
- Methanol (1)
- Methode der Finiten Elemente (1)
- Methodology (1)
- Methylenblauversuch (1)
- Methylene blue test (1)
- Microtexture (1)
- Mieten (1)
- Mikrotextur (1)
- Minderung (1)
- Mineral (1)
- Mixed design (1)
- Mobile barrier (1)
- Modal split (1)
- Model (not Math) (1)
- Monat (1)
- Month (1)
- Moped (1)
- Multilane (1)
- Multiple vehicle accident (1)
- Nachbehandlung (Beton) (1)
- Nachricht (1)
- Nachtrunk (1)
- Nasse Strasse (1)
- Naturstein (1)
- Nebel (1)
- Nebenstraße (1)
- Nerve (1)
- Nerven (1)
- Neural network (1)
- Neurologie (1)
- Neurology (1)
- Neuronales Netz (1)
- Niedrigtemperaturasphalt (1)
- Nigeria (1)
- Nitric acid (1)
- Nitrogen (1)
- No stopping (1)
- Nordamerika (1)
- North America (1)
- Norway (1)
- Norwegen (1)
- Notausgang (1)
- Notch effect (1)
- Oberflächenbehandlung (1)
- Obst (1)
- Obstacle (1)
- Off peak hour (1)
- Offenporiger Asphalt (1)
- Offset impact test (1)
- Offside (1)
- On the right (1)
- On the spot investigation (1)
- Opening (road (1)
- Opening (road transp line) (1)
- Operational research (1)
- Operations (transp network) (1)
- Operations Research (1)
- Optics (1)
- Optik (1)
- Optimierung (1)
- Organic (1)
- Organic compounds (1)
- Organisation ; Statistik (1)
- Overhead traffic sign (1)
- Overturning (1)
- Oxygen (1)
- Padding (safety) (1)
- Parking facilities (1)
- Parkraum (1)
- Passenger information (1)
- Passenger traffic (1)
- Pavement design (1)
- Paver (1)
- Payment (1)
- Peat (1)
- Pelvis (1)
- Pendel (1)
- Pendulum (1)
- Pendulum tests (1)
- Personenverkehr (1)
- Petrographie (1)
- Petrography (1)
- Pfahl (1)
- Pfosten (1)
- Photoelectrical (1)
- Physically handicapped person (1)
- Piezoelectricity (1)
- Piezoelektrizität (1)
- Pile (1)
- Pipe (1)
- Planfreier Knotenpunkt (1)
- Plastic (1)
- Pole (1)
- Polieren (1)
- Polishing (1)
- Polymerisierung (1)
- Polymerization (1)
- Poren (1)
- Porous materials (1)
- Porphyr (1)
- Porphyry (1)
- Position (1)
- Post tensioning (1)
- Postcrash phase (1)
- Pothole (1)
- Precast concrete (1)
- Precision (1)
- Pregnancy (1)
- Preloading (soil) (1)
- Pricing (1)
- Privat (1)
- Private (1)
- Privatisation (1)
- Privatization (1)
- Probenahme (1)
- Profilierter Randstreifen (1)
- Programmed learning (1)
- Prohibiton (1)
- Protective helmet (1)
- Prüefverfahren (1)
- Prüfkörper (1)
- Prüfung (1)
- Pssives Sicherheitssystem (1)
- Public-Private-Partnership (1)
- Pumpeffekt (1)
- QAccident (1)
- Quality Management System (1)
- Querungshilfe für Tiere (1)
- Quick (1)
- Radial (1)
- Radius; Straße (1)
- Rahmen (Statik) (1)
- Rail bound transport (1)
- Rain (1)
- Rammsondierung (1)
- Ramp metering (1)
- Rastplatz (1)
- Rate of compaction (1)
- Rauheit (1)
- Real-time (1)
- Rear view mirror (1)
- Recidicist (1)
- Reconstruction [accid] (1)
- Reduction (decrease) (1)
- Regelkreis (kybernetisch) (1)
- Regen (1)
- Rehabilitation (Road user) (1)
- Reibung (1)
- Reinforcing materials (1)
- Republic of Corea (1)
- Research Report (1)
- Research projects (1)
- Research projekt (1)
- Research reports (1)
- Reserch report (1)
- Resurfacing (1)
- Resuscitation (1)
- Reversing (veh) (1)
- Rheological properties (1)
- Rheometer (1)
- Rib (1)
- Richtlinie (1)
- Rigid Pavement (1)
- Road base (1)
- Road pricing (1)
- Road tanker (1)
- Road transport (1)
- Road verge (1)
- Rock mechanics (1)
- Rohrknoten (1)
- Rohrleitung (1)
- Roll over (veh) (1)
- Roller compacted concrete (1)
- Roof (veh) (1)
- Rotation (1)
- Rsk (1)
- Rumpelstreifen (1)
- Run off (1)
- Run oo the road (accid) (1)
- Rupture (1)
- Rural area (1)
- Rutschung (1)
- Röntgenstrahlung (1)
- Rücken (1)
- Rückspiegel (1)
- Rückwärtsfahren (1)
- Safety glass (1)
- Safety harness (1)
- Safety system (1)
- Saftey (1)
- Salpetersäure (1)
- Salt (deicing) (1)
- Sampling (1)
- Sand equivalent (1)
- Sandäquivalent (1)
- Sanitary facilities (1)
- Sanitäre Anlagen (1)
- Sauerstoff (1)
- Schaumbitumen (1)
- Schienentransport (1)
- Schlagloch (1)
- Schnee (1)
- Schneeräumgerät (1)
- Schneeräumung (1)
- Schnell (1)
- Schnittstelle (1)
- Schotter (1)
- Schubmodul (1)
- Schwangerschaft (1)
- Schweißen (1)
- Schweißknoten (1)
- Schweregrad (UNfall (1)
- Schwermetall (1)
- Schädel (1)
- Schätzung (1)
- Sealing compound (1)
- Seat (1)
- Seat belt (1)
- Seat harness (1)
- Secondary road (1)
- Seetransport (1)
- Segregation (traffic (1)
- Selbsterklärende Straße (1)
- Selbstverdichtender Beton (1)
- Self compacting concrete (1)
- Service life (1)
- Service station (1)
- Severance (1)
- Severity (accid, injuy) (1)
- Shared Space (1)
- Shared space (1)
- Sheath (1)
- Shell (struct) (1)
- Sicherheit; (1)
- Sicherheitsglas (1)
- Sicherheitspolsterung (1)
- Sichtbarkeit ; Versuch (1)
- Side light (1)
- Sieben (1)
- Sieving (mater) (1)
- Signal (1)
- Signal (Zeichen) (1)
- Signalbrücke (1)
- Signalisierung (1)
- Significance (stat) (1)
- Skid resistance (1)
- Skull (1)
- Slab pumping (1)
- Slope (terrain) (1)
- Slope stability (1)
- Smart structure (1)
- Smoothness (1)
- Snow (1)
- Snow clearance (1)
- Snow clearance equipment (1)
- Social factors (1)
- Sonderspur (1)
- Soziale Faktoren (1)
- Sozialisation (1)
- Span (1)
- Spannweite (1)
- Speciifications (1)
- Speed control (1)
- Speed) (1)
- Speet limit (1)
- Spinal calum (1)
- Sprache (1)
- Spritzbeton (1)
- Sprödigkeit (1)
- Sri Lanka (1)
- Stadtentwicklung (1)
- Stadtschnellbahn (1)
- Standsicherheit (1)
- Stat) (1)
- Stated preferences (1)
- Statistik (math) (1)
- Steel bridge (1)
- Steg (1)
- Stickoxide (1)
- Stickstoff (1)
- Stochastic Process (1)
- Stochastisch (1)
- Stop (Public transport) (1)
- Stop (public transport) (1)
- Stopping distance (1)
- Stossdämpfer (1)
- Straight (road) (1)
- Strasse (1)
- Straßenbeleuchtung (1)
- Straßenbenutzungsgebühr (1)
- Straßenleuchte (1)
- Straßentransport (1)
- Strength (1)
- Strength of materials (1)
- Stripping (binder) (1)
- Structure (geomorphol) (1)
- Struktur (geomorphol) (1)
- Störfall (1)
- Störfalldetektion (1)
- Subgrade (1)
- Subsequent drink (1)
- Substitution drugs (1)
- Sulfat (1)
- Sulphate (1)
- Surface dressing (1)
- Suspension bridge (1)
- Sättigungsgrad (mater) (1)
- T Träger (1)
- T beam (1)
- Tactile (1)
- Tactile perception (1)
- Tag (24 stunden) (1)
- Tagesfahrlicht (1)
- Taking (Property) (1)
- Tal (1)
- Tankstelle (1)
- Tankwagen (1)
- Tarif (1)
- Tariff (1)
- Tastbar (1)
- Tax (1)
- Taxi (1)
- Technische Vorschriften (1)
- Technische Überwachung (Fahrzeug) (1)
- Teenage driver (1)
- Telematic (1)
- Telematics; Traffic control (1)
- Television (1)
- Temperaturabgesenkter Asphalt (1)
- Tender (1)
- Tension test (1)
- Test rig (1)
- Testing Rig (1)
- Thailand (1)
- Thermoplast (1)
- Thermoplastic (1)
- Thesis (1)
- Three (1)
- Timbering (1)
- Toedlicher Unfall (1)
- Toleranz (stat) (1)
- Ton (Gestein) (1)
- Torf (1)
- Tower (Bridge) (1)
- Tower (bridge) (1)
- Traffic Control (1)
- Traffic Lane (1)
- Traffic count ; Year (1)
- Traffic delay (1)
- Traffic infrastructure (1)
- Traffic relief (1)
- Traffic survey ; Travel survey (1)
- Trailer (1)
- Transducer (1)
- Transfer (phys) (1)
- Transport authority (1)
- Transport network (1)
- Transportat mode (1)
- Transportation infrastructure (1)
- Travel survey (1)
- Travel time (1)
- Traveler (1)
- Treibhausgas (1)
- Triaxial shear tests (1)
- Trockenheit (1)
- Truck (1)
- Träger (1)
- Two dimensional (1)
- Ultra high performance concrete (1)
- Ultrahochfester Beton (1)
- Ultraviolet (1)
- Ultraviolett (1)
- Umlauf (1)
- Umwelt Unfallverhütung (1)
- Umweltfreundlichkeit (1)
- Unbound base (1)
- Uncontrolled junction (1)
- Underground railway (1)
- Unfall ; Veränderung (1)
- Unfalldaten (1)
- Unfallfolgephase (1)
- Unfallrate (1)
- Unfallrekonsruktion (1)
- Unfallspurensicherung (1)
- Unfallverhütug (1)
- Ungebundene Tragschicht (1)
- Ungeschützter Verkehrsteilnehmer (1)
- United Kindom (1)
- United Nations (1)
- Unterbau (1)
- Untersuchung am Umfallort (1)
- Urin (1)
- Urine (1)
- Usa (1)
- Valley (1)
- Variability (1)
- Vehicle Occupant (1)
- Vehicle inspection (1)
- Vehicle maintenance (1)
- Vehicle marking (conspicuity) (1)
- Vehicle mix (1)
- Vehicle tracking (location) (1)
- Veletzung) (1)
- Verankerung (1)
- Verbau (1)
- Verdichtungsgrad (1)
- Vereinigtes Königreichl (1)
- Vereinte Nationen (1)
- Verfahen (1)
- Verfahren ; Verkehrsinfrastruktur (1)
- Verformungswiderstand (1)
- Verkehrsarme Straße (1)
- Verkehrsarme Zeit (1)
- Verkehrsaufteilung (1)
- Verkehrsberuhigung (1)
- Verkehrsentlastung (1)
- Verkehrsentmischung (1)
- Verkehrsentstehung (1)
- Verkehrsinformation (1)
- Verkehrsqualizät (1)
- Verkehrsstaerke (1)
- Verkehrstherapie (1)
- Verkehrsumlegung (1)
- Verkehrsverbund (1)
- Verkehrswirtschaft (1)
- Verletzung; (1)
- Verlust (1)
- Vermeidung (1)
- Verpressung (1)
- Verspätung (1)
- Versuch Apparatus (measuring) (1)
- Versuchsstraße (1)
- Vertical (1)
- Vertikal (1)
- Vertragspartner (1)
- Veränderlichkeit (1)
- Video camera (1)
- Videokamera (1)
- Vierradantrieb (1)
- Virtual reality (1)
- Virtuelle Realität (1)
- Viscoelasticity (1)
- Viskoelastizität (1)
- Vorbelastung (1)
- Vorbelastung (Boden) (1)
- Vorspannung mit nachtr Verbund (1)
- Vulnerable road user (1)
- Waiting time (1)
- Walkways (1)
- Wall (1)
- Walzasphalt (1)
- Walzbeton (1)
- Warm mix asphalt (1)
- Wartezeit (1)
- Waschbeton (1)
- Waste disposal (1)
- Weak ground (1)
- Web site (1)
- Website (1)
- Widerlager (1)
- Wildlife crossing (1)
- Window (veh) (1)
- Windshield (1)
- Women (1)
- Wood (1)
- Workplace (1)
- Wrong way driving (1)
- Zentrale Verkehrssteuerung (1)
- Zertifizierung (1)
- Zinc (1)
- Zink (1)
- Zu schnelle Fahren (1)
- Zu schnelles Fahren (1)
- Zuflussregelung (1)
- Zusammendrückbarkeit (1)
- Zusammenstoss (1)
- Zweidimensional (1)
- accident (1)
- aktives Sicherheitssystem (1)
- analyses (math) (1)
- ar (1)
- efficiency (1)
- fatality (1)
- finite element method (1)
- head (1)
- material (constr) (1)
- pedestrians) (1)
- road) (1)
- sicherheit (1)
- simulation (1)
- stat) (1)
- stat] (1)
- transp line) (1)
- tödlicher Unfall (1)
- Ästhetik (1)
- Öffentlich-Private-Partnerschaft (1)
- Übergangssignal (1)
- Überrollung (1)
- Überschwemmung (1)
- Übertrager (1)
- Übertragung (phys) (1)
Institut
- Sonstige (1109) (entfernen)
The purpose of this study was to analyse the actual injury situation of bicyclists regarding accidents involving more than one bicyclist. Bicyclists were included in a medical and technical analysis to create a basis for preventive measures and discovered repeating accident patterns and circumstances such as daytime, environment, helmet use rate. Technical and medical data were collected at the scene, shortly after accident. The population was compared focusing on bicycle versus bicycle accidents. Technical analysis included speed at crash, type of collision, impact angle, environment, used lane and relative velocity. Medical analysis included injury pattern and severity (AIS, ISS). Included were 578 injured bicyclists in 289 accidents from years 1999 to 2008, 61 percent were male (n=350) and 39 percent female (n=228). Sixty-seven percent ranged between 18 to 64 years of age, twelve percent each between 13 to 17 years of age and older than 65 years, eight percent between 6 to 12 years and one percent between 2 to 5 years.. Crashes took place in urban areas in 92 percent, in rural areas in 8 percent. Weather conditions were dry lanes in 97 percent and wet conditions in 3 percent. Eighty-three percent of all accidents happened during daytime, ten percent during night, and seven percent during dawn. The helmet use rate was only 7,5 percent in all involved bicyclists. The mean Maximum Abbreviated injury scale, Injury severity score was 1,31. Bicyclists are still minimally- or unprotected road users. The helmet use rate is unsatisfactorily low. The incidence of bicycle to bicycle crashes is high. Most of these accidents take place in urban areas. The level and pattern of injuries is moderate. Most of the more severe injuries occur to the head and could have been avoided by frequent helmet use.
Bindemitteldesign für Asphaltstraßen : Definition eines chemisch-rheologischen Anforderungsprofils
(2018)
Das Ziel dieses Projekts war das Auffinden von Zusammenhängen zwischen den chemischen Bitumeneigenschaften und dem rheologischen Verhalten, dem Alterungsverhalten sowie dem Haftverhalten des Bindemittels. Zum Erreichen dieses Ziels wurden zwölf Bitumenproben in unterschiedlichen Alterungszuständen und vier Gesteinsproben mit verschiedenen chemischen, rheologischen, physikalischen und haftbetreffenden Methoden untersucht. Bei der Gegenüberstellung der Prüfergebnisse konnte eine Vielzahl an bilateralen Korrelationen zwischen den einzelnen Kennwerten gefunden werden. Zusätzlich zu diesen bilateralen Zusammenhängen wurden weiterhin mithilfe von multiplen Regressionsanalysen Linearkombinationen erstellt, die durch eine kombinierte Berücksichtigung der Gehalte und der Molmassenmittelwerte Mn der SARA-Fraktionen die Beschreibung und Prognose einer Vielzahl von Kennwerten ermöglicht. Zu diesen Kennwerten zählen neben den rheologischen Prüfgrößen, wie dem Erweichungspunkt, der Nadelpenetration sowie dem komplexen Schermodul |G*| und dem Phasenwinkel δ, auch die Alterungsindices dieser Prüfgrößen. Somit können anhand der SARA-Fraktionen im nicht gealterten Zustand Aussagen über das Alterungsverhalten der Bitumen getroffen werden. Neben der Rheologie und dem Alterungs-verhalten ist zudem eine Beschreibung des Haftverhaltens möglich, wobei neben den SARA-Fraktionen als Gesteinskennwerte weiterhin der Siliziumdioxidgehalt sowie der isoelektrische Punkt zu berücksichtigen sind. Zudem konnte durch die Umstellung der gefundenen Linearkombinationen ein synthetisches Bindemitteldesign abgeleitet werden, sodass durch die Vorgabe der angestrebten rheologischen, alterungsbedingten und haftungsbedingten Kennwerte die zum Erreichen dieser Kennwerte erforderlichen Gehalte der SARA-Fraktionen ermittelt werden können.Dies ermöglicht die Modifizierung von Bitumenzusammensetzungen, um eine gezielte Beeinflussung der Bindemitteleigenschaften zu erreichen.
The frontal crash is still an important contributor to deaths and serious injured resulting from road accidents in Europe. As the Hybrid-III dummy used in crash tests is over two decades old, the European Enhanced Vehicle-safety Committee is studying the potential for a new test device. Key is the availability of a well-defined set of requirements that identifies the minimum level of biofidelity required for an advanced frontal dummy. In this paper, a complete set of frontal impact biofidelity requirements, consisting of references , description of test conditions and corridors, is presented.
In the EC FP6 Integrated Project Advanced Protection Systems, APROSYS, the first WorldSID small female prototype was developed and evaluated by BASt, FTSS, INRETS, TRL and UPM-INSIA during 2006 and 2007. Results were presented at the ESV 2007 conference (Been et al., 2007). With the prototype dummy scoring a biofidelity rating higher than 6.7 out of 10 according to ISO/TR9790, the results were very promising. Also opportunities for further development were identified by the evaluation group. A revised prototype, Revision1, was subsequently developed in the 2007-2008 period to address comments from the evaluation group. The Revision1 dummy includes changes in the half arms and the suit (anthropometry and arm biomechanics), the thorax and abdomen ribs and sternum (rib durability), the abdomen/lumbar area and the lower legs (mass distribution). Also a two-dimensional chest deflection measurement system was developed to measure deflection in both lateral and anterior-posterior direction to improve oblique thorax loading sensitivity. Two Revision1 prototype dummies have now been evaluated by FTSS, TRL, UPM-INSIA and BASt. The updated prototype dummies were subjected to an extensive matrix of biomechanical tests, such as full body pendulum tests and lateral sled impact tests as specified by Wayne State University, Heidelberg University and Medical College of Wisconsin. The results indicated a significant improvement of dummy biofidelity. The overall dummy biofidelity in the ISO rating system has significantly improved from 6.7 to 7.6 on a scale between 0-10. The small female WorldSID has now obtained the same biofidelity rating as the WorldSID mid size male dummy. Also repeatability improved with respect to the prototype. In conclusion the recommended updates were all executed and all successfully contributed in achieving improved performance of the dummy.
Die hier vorgestellten Forschungsprojekte hatten die Aufgabenstellung, - sinnvolle Obergrenzen für den biogenen Blend-Anteil im Kraftstoff aus ökonomisch-technischer Sicht aufzuzeigen sowie - technische Anforderungen an Pkw aus Altbestand und Neufahrzeugen für den Betrieb mit solchen Kraftstoff-Blends zu untersuchen, insbesondere in Hinblick auf Aspekte der Dauerhaltbarkeit. Auf Basis einer umfangreichen Literaturrecherche wurden zunächst sinnvolle Beimischungen ermittelt, die in 5 Fahrzeugen (3 Otto-Pkw, 2 Diesel-Pkw) auf einem Abgasrollenprüfstand getestet wurden. Anschließend wurden zwei Fahrzeuge einer Dauerlaufuntersuchung (ca. 80.000 km) unterzogen. Hierbei wurden u. a. Emissionsverhalten, Kraftstoffverbrauch und Motorleistung bewertet und Motorölproben entnommen. Am Ende der Dauerlaufuntersuchungen wurden bei beiden Fahrzeugen Motor und Kraftstoffsystem sorgfältig inspiziert. Aus fahrzeugtechnischer Sicht begrenzen bei Biodiesel vor allem die Ölverdünnung sowie der Anstieg der NOx-Emissionen den maximal möglichen Beimischungsanteil. Bei Bio-Alkohol sind insbesondere die Materialverträglichkeit und der Kraftstoffverbrauch limitierende Faktoren für erhöhte Beimischungen. Obwohl die betrachteten Euro-5-Fahrzeuge nicht für den Betrieb mit erhöhten Beimengungen an Biokraftstoffen ausgelegt waren, wurden die maßgeblichen Grenzwerte für die limitierten Emissionen im Verlauf der Untersuchungen nicht überschritten. Mit Ausnahme von NOx bei den Dieselfahrzeugen wurden darüber hinaus sogar die Euro-6-Grenzwerte unterschritten.
Still correlated with high mortality rates in traffic accidents traumatic aortic ruptures were frequently detected in unprotected car occupants in the early years. This biomechanical analysis investigates the different kinds of injury mechanisms leading to traumatic aortic injuries in todays traffic accidents and how the way of traffic participation affects the frequency of those injuries over the years. Based on GIDAS reported traffic accidents from 1973 to 2014 are analyzed. Results show that traumatic aortic injuries are mainly observed in high-speed accidents with high body deceleration and direct load force to the chest. Mostly chest compression is responsible for the load direction to the cardiac vessels. The main observed load vector is from caudal-ventral and from ventral solely, but also force impact from left and right side and in roll-over events with chest compression lead to traumatic aortic injuries. Classically, the injury appeares at the junction between the well-fixed aortic arch and the pars decendens following a kind of a scoop mechanism, a few cases with a hyperflexion mechanism are also described. In our analysis the deceleration effect alone never led to an aortic rupture. Comparing the past 40 years aortic injuries shift from unprotected car occupants to today's unprotected vulnerable road users like pedestrians, cyclists and motorcyclists. Still the accident characteristics are linked with chest compression force under high speed impact, no seatbelt and direct body impact.
Bitumenextraktion aus Asphalt mit dem nachwachsenden Rohstoff Octansäuremethylester (Kokosester)
(2018)
In diesem Forschungsprojekt wird die Frage geklärt, ob Octansäuremethylester (OME) ein geeignetes Substitut für Trichlorethylen als Standardlösemittel für die Bindemittelextraktion aus Asphaltmischgut darstellen kann. Es werden die technischen Voraussetzungen für den Einsatz, die Auswirkungen auf die Ergebnisse von Laborprüfungen und eventuelle labortechnische Folgen analysiert. Die Möglichkeit der Substitution wird für verschiedene Asphaltarten und Bitumen überprüft. OME ist ein weitestgehend ungefährlicher bitumenlösender Pflanzenölester mit einem Siedepunkt von ca. 193 -°C und einem charakteristischen Geruch nach Kokos. Ab einer Temperatur von ca. 245 -°C sind die Lösemitteldämpfe bei Sauerstoffkontakt spontan entflammbar, weshalb die Heissextraktion aus Arbeitsschutzgründen mit diesem Lösemittel nicht durchgeführt werden sollte. Die Extraktion in einer geschlossenen Anlage bei abgesenktem Druck und moderateren Temperaturen kann sicher erfolgen. In den Ergebnissen der Mischgutanalyse zeigen sich unter Anwendung von OME im Vergleich zu Ergebnissen unter Anwendung von Tri als Lösemittel keine signifikanten Unterschiede. Sowohl der bestimmte Bindemittelgehalt als auch der bestimmte Fülleranteil sind unter Anwendung der beiden Lösemittel weitestgehend als gleich zu bewerten. In dem an die Extraktion anschließenden Prozess der Bindemittelrückgewinnung wird das Lösemittel im Rotationsverdampfer von der Bitumenphase getrennt. Dieser Vorgang der Destillation wurde für üblicherweise im Asphaltlabor vorhandene Rotationsverdampfer weitestgehend optimiert. Es war jedoch nicht möglich, das gesamte Lösemittel von der Bitumenphase zu trennen, weshalb Lösemittelreste im Bitumen verblieben. Diese führen zu Veränderungen der physikalischen Eigenschaften der rückgewonnenen Bindemittel. Mehrheitlich zeigt sich das mit OME zurückgewonnene Bindemittel in allen angesprochenen Temperaturbereichen weicher als nach Rückgewinnung mit Tri. Die Ergebnisse der Vergleichsuntersuchungen deuten an, dass die Menge der im Bitumen verbleibenden Lösemittelreste vom verwendeten Destillationsgerät abhängt und dadurch die Vergleichbarkeit von Ergebnissen aus Bitumenprüfungen an mit OME zurückgewonnenen Bindemitteln gering ist.
Ausgehend vom Blickverhalten beim Betrachten von statischen Konfigurationen werden die Parameter des Blickverhaltens (stimulusbedingte Einflussgrößen, Person des Betrachters) beschrieben. Die visuelle Informationsaufnahme wird als Wechselwirkung zwischen Anforderungen und Umweltmerkmalen verstanden. Aus der Fülle der Ergebnisse, die auch die Rolle der Fahrpraxis, die Trainierbarkeit des Blickverhaltens sowie den Zustand des Fahrzeuglenkers (Alkohol, Schlafmangel, Kohlenmonoxyd) berücksichtigen wie auch auf Fahrzeugmerkmale eingehen, werden Erkenntnisse für den alltäglichen Verkehr gezogen.
Ruptures and dissections of the thoracic and abdominal aortic vessel caused by traffic accidents are rare but potentially life-threatening injuries. They can occur by blunt trauma via seat belt or dashboard injury. The study aimed at evaluating the overall mortality, morbidity, neurological disorders, and differences in operative procedures of open repair and stenting. It shows that, with a change and improvement in diagnostic tools and surgical approach, mortality and morbidity of blunt aortic injuries were significantly reduced. Still an immediate life-threatening injury early diagnosis via multiple-slice and scans and surgical repair with minimally invasive stents showed excellent short-time results for selected patients.
Das Ziel des Forschungsvorhabens war es festzustellen, welche Bordsteinformen für den Einsatz an Überquerungsstellen mit einer Einbauhöhe von 3 cm (eine Einbauhöhe (oder Auftrittshöhe) von 3 cm bedeutet, dass die Oberkante der Auftrittsfläche des Bordsteins 3 cm über dem Niveau der angrenzenden Fahrbahn liegt) sowie vorzugsweise zu verwendeten Bodenindikatoren aus Sicht unterschiedlicher Gruppen behinderter Menschen geeignet sind. Zunächst wurde eine umfangreiche Literaturanalyse nationaler und internationaler Literatur durchgeführt, um allgemeine Gestaltungsgrundsätze für barrierefreie Überquerungsstellen abzuleiten. Zusätzlich dazu sollte eine umfangreiche Befragung sehbehinderter Menschen zu ihren Erfahrungen bei der Mobilität im Straßenraum weiteren Aufschluss geben. Auf Grundlage der Literaturanalyse und Befragung wurde im Rahmen der Untersuchungen ein mehrschichtiges Verfahren aus qualitativen sowie objektiven und subjektiven Methoden angewendet. Dieses sollte darüber Aufschluss geben, welche Borsteinformen und Bodenindikatoren aus Sicht von blinden und sehbehinderten Menschen mit Langstock sowie der Nutzer von rollbaren Hilfsmitteln (Rollator, Rollstuhl) für einen Einbau an Überquerungsstellen bevorzugt werden. Die Untersuchungsergebnisse bestätigen die Einbauhöhe von 3 cm als weiterhin brauchbaren Kompromiss, auch wenn sich mit dieser Einbauhöhe die unterschiedlichen Anforderungen von Rollstuhl- und Rollatornutzern einerseits sowie blinden und stark sehbehinderten Menschen andererseits nicht optimal erfüllen lassen. Allerdings konnten auf Grundlage der Untersuchungsergebnisse Empfehlungen für eine im Rahmen des Kompromisses gut geeignete Bordsteinform an Überquerungsstellen abgeleitet werden. Die Messungen und Versuche mit unterschiedlichen Bodenindikatoren gaben Aufschluss darüber, welche Strukturen im Hinblick auf die Taktilität und die Überrollbarkeit an Überquerungsstellen grundsätzlich gut geeignet sind. Es wurde grundlegende und detaillierte Empfehlungen für die Ausbildung und Anwendung der Bordsteine und Bodenindikatoren an Überquerungsstellen an Hauptverkehrsstraßen ausgearbeitet. Diese sollten in die Fortschreibung relevanter Regelwerke einfließen. Darüber hinaus konnte durch das Forschungsvorhaben zusätzlicher Forschungsbedarf für weitere Verbesserungsmöglichkeiten an Überquerungsstellen aufgezeigt werden.
Das Gesamtziel des Forschungsprojektes zum "Brand- und Abplatzverhalten von Faserbeton in Straßentunneln" war die Verifizierung und Validierung des Einflusses von Kunststofffasern auf das Brand- und Abplatzverhalten von Tunnelbetonen unter der besonderen Berücksichtigung der spezifischen Randbedingungen in Straßentunneln. Dabei sollte im Rahmen der Forschungsarbeit eruiert werden, inwieweit sich mit Kunststofffasern modifizierte Tunnelbetone, die entsprechend ihrer Betonzusammensetzung den gültigen Vorgaben der ZTV-ING zusammengesetzt werden sollten, für den Straßentunnelbau als bauliche Brandschutzmaßnahme eignen. Es wurde untersucht, welche Fasergehalte und Fasergeometrien in den Tunnelbetonen einzusetzen sind, damit ein explosionsartiges Abplatzen des Betons infolge der Brandbeanspruchungen mit dem schnellen Temperaturanstieg und den hohen Maximaltemperaturen verhindert werden kann. Des Weiteren wurden experimentell verifiziert, ob bei den festgelegten Betonen ohne Faserzugabe und fasermodifizierten Tunnelbetonen, die zulässige Maximaltemperatur von 300-°C in Höhe der tragenden Bewehrung (vergleiche ZTV-ING, Teil 5 (Tunnelbau), Abschnitt 1, 10.3.2) nicht überschritten wird. Ein weiteres Ziel der Arbeit war es, herauszufinden, ob die in der ZTV-ING, Teil 5, Abschnitt 2, 10.3.2 (2), geforderte verzinkte Mattenbewehrung (N94) für die offene Bauweise als wirksamer Schutz gegen auftretende Abplatzungen infolge einer einseitigen Temperaturbeanspruchung durch die ZTV-ING-Kurve angesetzt werden kann. Diese zuvor beschriebenen grundlegenden Zielstellungen wurden vor allem an großmaßstäblichen Bauteilversuchen experimentell untersucht. Dabei wurden entsprechend der Trennung in ZTV-ING für Tunnelbauwerke in die geschlossene Bauweise (ZTV-ING, Teil 5, Tunnelbau, Abschnitt 1 und in die offene Bauweise (ZTV-ING, Teil 5, Tunnelbau, Abschnitt 2) angepasste Tunnelbetonrezepturen und verschiedene Probekörpergeometrien untersucht. Mit der Durchführung des Forschungsprojektes sollte insgesamt der Nachweis des positiv wirksamen Einflusses von PP-Fasern auf das Brand- und Abplatzverhalten von ZTV-ING-konformen Tunnelbetonen für die Anwendung in Straßentunneln erbracht und zudem im Großversuch gezeigt werden, dass es möglich ist, fasermodifizierte Tunnelbetone mit Praxis üblichen Einbaukonsistenzen zielsicher herzustellen.
Brände in Reisebussen stellen ein sehr seltenes Ereignis dar. Das daraus resultierende Gefahrenpotenzial übersteigt aber das eines Pkws bei weitem, da von einer größeren Zahl betroffener Personen ausgegangen werden muss. Bauartbedingt ist mit erschwerten Bedingungen bei der Evakuierung von Bussen zu rechnen, insbesondere bei Sichtbehinderung durch Rauch in Verbindung mit Panikreaktionen der Fahrgäste. Derzeit gültige Richtlinien für Anforderungen an das Brandverhalten von Werkstoffen der Innenausstattung von Reisebussen geben reale Brände als prüftechnisches Szenario nur näherungsweise wieder. Dabei wird dem Einbauort der Materialien zu wenig Aufmerksamkeit gewidmet. Bezüglich Brandausbreitung (Übergang auf andere Baugruppen, brennendes Abtropfen) sind neue Kriterien erforderlich, welche die Zulassung des Werkstoffes beeinflussen können. Hinsichtlich der Toxizität der beim Verbrennen oder bei thermischer Belastung der Werkstoffe, insbesondere der Kunststoffe, entstehenden Rauchgase gibt es bis heute für den Reisebussektor nur unzureichende Vorschriften. In diesem Zusammenhang ist vor allem das gleichzeitige Brennen mehrerer unterschiedlicher Materialien im Innenraum von Reisebussen zu berücksichtigen. Zur Weiterentwicklung des bestehenden Regelwerks für die Zulassung von Reisebussen in Hinblick auf eine Optimierung der Brandvermeidung und der Brandeingrenzung mittels praxisnaher Prüfverfahren sollten im Rahmen dieses Projektes bestehende Regelwerke dargestellt und Verbesserungsmöglichkeiten aufgezeigt werden. Der vorliegende Abschlussberichts stellt die bisher gewonnenen Erkenntnisse dar. Besonderer Wert wurde dabei auf die Auswertung des realen Brandgeschehens von Reisebussen gelegt. Primär sind hierbei die Brandentstehung sowie die Ausbreitungswege analysiert worden. Ein weiterer Schwerpunkt ist die Darstellung von Brand-Detektionsverfahren. Forderungen aus dem Eisenbahnbereich in Bezug auf den Brandschutz in Personenzugwagen werden wiedergegeben, die Übertragbarkeit auf Reisebusse wird diskutiert. Die gewonnenen Erkenntnisse wurden in einem Lastenheft zusammengestellt, wobei die Orientierung an bestehenden Regelungen erfolgt. Neben der Prävention mittels Prüfverfahren wird besonderer Wert auf die Organisation sowie die Bereitstellung von Löschmitteln für effektive Erstmaßnahmen im Brandfall gelegt. Die Empfehlungen wurden im Rahmen eines Fachgesprächs mit Experten von Reisebusherstellern, mit Busunternehmern und mit Feuerwehrleuten diskutiert, Brandversuche wurden durchgeführt. Bei den vorgeschlagenen Prüfverfahren erfolgte eine Orientierung an den für das deutsche Eisenbahnwesen relevanten Normen. Zur Kostenreduktion werden für einige Bauteile alternative Prüfverfahren zugelassen. Mangels Reproduzierbarkeit, nur geringer Aussagekraft und unverhältnismäßig hoher Kosten wurden Full-Scale-Tests nicht in die Empfehlungen aufgenommen. Als Ergebnis steht die Forderung, dass alle Vorschläge im Falle einer Umsetzung europaweit gelten müssen. Die Brandfrüherkennung durch automatische Brandmeldeanlagen wurde für den Motorraum sowie in Teilen für den Innenraum befürwortet; dagegen werden automatische Löschanlagen aus wirtschaftlichen Gründen nicht gefordert werden. Beim mitgeführten Löschgerät sind Änderungen der bestehenden Regelung erforderlich, da sich diese auf abgelöste Normen beziehen, die Kombination von Pulver- und Schaumlöscher hat sich als Optimum herauskristallisiert. Besonders wichtig ist eine Information der Fahrgäste vor Fahrtantritt über die im Bus verwendeten Sicherheitseinrichtungen und deren Funktion. Bislang scheiterte die konsequente Umsetzung an der Vielzahl unterschiedlicher Funktionsprinzipien der Sicherheitseinrichtungen. Hier besteht Handlungsbedarf.
Um das oft komplexe Zusammenwirken von einzelnen betriebstechnischen Einrichtungen zur Detektion von Brandereignissen und Steuerung der Lüftung sowie den übrigen sicherheitstechnischen Systemen überprüfen zu können, werden nach ZTV-ING im Rahmen der Abnahme Funktionsprüfungen gefordert, indem Brände simuliert und die zu prüfenden Größen messtechnisch erfasst werden. Reale Brandversuche in Straßentunnel sind jedoch unter dem Aspekt der Wirtschaftlichkeit und des notwendigen technischen Aufwandes zur Erfassung der interessierenden Branddaten und zum Schutz der betriebstechnischen Einrichtungen sowie des Bauwerkes in der Anzahl der Szenarien wie in der Energiefreisetzung begrenzt. Die unter vertretbarem Aufwand erreichbare Brandleistung beträgt zirka 5 MW. Um dennoch Aussagen über das Verhalten des Systems bei höheren Brandleistungen und unterschiedlichen, realen Randbedingungen (Brandorte, Verkehrsbelegung, Windverhältnisse und so weiter.) zu erhalten, sollten Simulationsrechnungen durchgeführt werden können. Diese erlauben eine sehr flexible Modellierung des Tunnels und die Ermittlung sämtlicher relevanter Größen an beliebigen Punkten im Untersuchungsgebiet. Da die Randbedingungen sehr tunnelspezifisch sein können, sind zur Kalibrierung entsprechender Rechenprogramme Eingangswerte aus standardisierten Brandversuchen hilfreich. Ziel der Untersuchung war es daher, mit Hilfe eines geeigneten Rechenprogramms Anforderungen an einen Brandversuch hinsichtlich der notwendigen Daten zur Funktionsüberprüfung und zur Brandhochrechnung zu definieren. Zur Durchführung der Simulationsrechnungen wurde der "Fire Dynamics Simulator" (FDS) verwendet, der über das National Institute of Standards and Technology als 0pen Source-Rechenprogramm erhältlich ist. Grundlage des Rechenprogramms bilden die Gleichungen für die Massen-, Impuls-, Energie- und Stofferhaltung, die im 3-dimensionalen Raum numerisch gelöst werden und als Ergebnis Geschwindigkeits-, Temperatur- und Konzentrationsfelder bereitstellen. Im Rahmen dieser Untersuchung wurden verschiedene Versuchsreihen des Memorial-Tunnel-Fire-Ventilation-Test-Program (MTFVTP) zur Verifizierung der Rechenergebnisse herangezogen. Die vergleichende Gegenüberstellung der einen Brand charakterisierenden Größen Geschwindigkeit und Temperatur ergaben eine überwiegend gute Übereinstimmung der Messwerte aus den Brandversuchen mit den Simulationsergebnissen. Basierend auf den Berechnungen zu den Temperatur- und Geschwindigkeitsverteilungen wurden schließlich unter den Aspekten der Funktionsüberprüfung der betriebstechnischen Einrichtungen und der Erfassung von Eingangsgrößen für Simulationsrechnungen Anforderungen zur Versuchsanordnung, Branddauer, Brandgut und Erfassung der relevanten Messgrößen im Längs- und Querschnitt sowie Anforderungen zu Schutzvorkehrungen abgeleitet. Die Untersuchung hat gezeigt, dass die Definition "eines" Standardbrandversuchs nicht zweckmäßig ist, da die Zielsetzungen sich zu sehr unterscheiden. Dagegen konnten konkrete Grundlagen und Empfehlungen zur Festlegung standardisierter Brandversuche für die gemäß RABT und ZTV-ING vorgesehenen Funktionstests erarbeitet werden. Außerdem konnte gezeigt werden, dass das für die Simulationsrechnungen verwendete Programm FDS derzeit ein adäquates Instrument bildet, nicht nur bezüglich der Simulation von Tunnelbränden unter realen Gegebenheiten und der resultierenden Strömungs- und Temperaturverhältnissen sowie Rauchkonzentrationen, sondern auch in Bezug auf die benötigte Rechner- und Speicherkapazität.
Die vorliegende Studie untersucht die Auswirkung der Ausstattung von Motorrädern mit Anti-Blockier-System (ABS) auf die Fahrsicherheit von Motorrädern. Hierzu wurden Fahrversuche im realen Verkehr und auf abgesperrter Teststrecke durchgeführt. Erfahrene und wenig erfahrene Motorradfahrer absolvierten Testfahrten auf nasser und trockener Fahrbahn mit und ohne ABS-Aktivierung des Motorrades. Bei den Versuchsfahrten kam es zu einigen kritischen Fahrsituationen, bei denen die Versuchspersonen insbesondere zu Beginn des Bremsmanövers von ihrem "normalen" Bremsverhalten abwichen. Bei blockierendem Hinterrad wurde der Bremsdruck vorne und hinten reduziert, was zu einer deutlichen Bremswegverlängerung führte. Bei den Vollbremsungen unter idealen Bedingungen auf abgesperrter Strecke wurden von erfahrenen Fahrern ohne ABS kürzere Bremswege als mit ABS erreicht. Kurvenbremsungen mit ABS-Regelung wurden im mittleren Geschwindigkeits- und Schräglagebereich fahrstabil durchgeführt. Die Ergebnisse zeigen, dass selbst erfahrene Motorradfahrer Bremsweg in kritischen Situationen verschenken. Geeignete Antiblockiersysteme könnten Motorradfahrern die Angst vor Radblockaden nehmen. Dies dürfte einen erheblichen Beitrag zur Steigerung der aktiven Sicherheit leisten.
The first stage of the work has been to collate information on bridge assessment from the participating countries. In the later stages, the aim is to provide guidelines that reflect the current best practices, a methodology that will allow for future development and sufficient flexibility to accommodate variations in national priorities as the process of harmonisation is pursued. The following tasks fall within the scope of the project: (1) a review of current procedures and standards used for bridge assessment in Europe; (2) the development of models for taking into account the bridge specific traffic conditions and material properties; (3) the use of reliability methods based on a probabilistic approach for bridge assessment including the use of measurements for updating the reliability of structural elements; and (4) the provision of recommendations for methods and procedures that can be adopted for the assessment module of the management framework highlighting where further development will be beneficial.
The GIDAS-investigation team of Dresden (VUFO) has documented more than 11.500 accidents since 1999. The documentation of the accident includes beside vehicle-, injury- and environmental-data very detailed reconstruction data. Within this accident investigation the VUFO began to record the skid resistance of the accident site in 2009. The measurements are divided in macro- and microroughness (Sand depth method and Portable Skid Resistance Tester-SRT-by Munro-Stanley London-©). Both methods are used to determine the skid resistance for more than 1000 passenger cars. The aim of the present study is to find out a relationship between the measured skid resistance, the road conditions and the friction coefficient, which is used to calculate the maximum accelerations and decelerations during a reconstruction of an accident. Basic approach to convert the SRT-value into the friction coefficient is the calculation of the theoretical absorbed energy of the spring rubber system of the swinging arm of lever. This absorbed energy is used to get the friction coefficient by using the equations for the work of friction. To consider the road-behavior, in correlation to the friction coefficient, the results will be merged with existing literature. Last step for this study will be a comparison between actual used friction coefficients all over the GIDAS-database and the theoretical results. The study shows, if it is possible to use the SRT-Measurement for the estimation of a friction coefficient for the reconstruction of a traffic accident. As expected, the GIDAS-Database and the additional measurement of the roughness of the road directly on the spot are an enormous useful dataset.
Das Ziel der vorliegenden Untersuchung zu den verkehrssicherheitsrelevanten Folgen des Cannabisgebrauchs war es, Daten zur potenziellen und tatsächlichen verkehrsbezogenen Gefährlichkeit im Hinblick auf die Fahreignung zu evaluieren. Im ersten Teil der Untersuchungen wurde durch die Düsseldorfer Arbeitsgruppe eine detaillierte Analyse der vorhandenen Forschungsliteratur zu den neuropsychologischen und psychiatrischen Effekten des Cannabiskonsums durchgeführt, die sowohl die Konsistenz eines Beeinträchtigungsnachweises als auch die Qualität der vorhandenen Studien berücksichtigt hat. Die meisten konsistent nachgewiesenen Defizite wurden dabei für die Konsumsituation des "Gelegenheitskonsumenten nach akutem Konsum" gefunden. Für abstinente oder sich in der Residualphase befindende Gelegenheitskonsumenten sind bisher keine Defizite auf Verhaltensebene konsistent nachgewiesen worden. Weiterhin wurden keine Hinweise dafür gefunden, dass bei regelmäßigen Cannabiskonsumenten nach akutem Cannabiskonsum oder während der Abstinenz mit stärkeren Verhaltensdefiziten zu rechnen ist als bei Gelegenheitskonsumenten. Diese Befunde machen eine Unterscheidung zwischen gelegentlichen und regelmäßigen Cannabiskonsumenten bezüglich der zu erwartenden Verhaltensdefizite hinfällig. Im zweiten Teil wurden durch die Heidelberger Arbeitsgruppe als Cannabinoid-positiv ermittelte Fälle aus 3 Jahren (2000—2002), die im Straßenverkehr beobachtete Auffälligkeiten zeigten, unter Berücksichtigung der gemessenen Cannabinoid-Plasmakonzentrationen betrachtet. Dabei wurde geprüft, ob und gegebenenfalls welcher Zusammenhang zwischen den analytisch ermittelten Konzentrationen an THC und seinen Metaboliten und den Auffälligkeiten, die im ärztlichen Blutentnahmeprotokoll und im polizeilichen Bericht vermerkt sind, besteht. Weder die Gesamteinschätzung der Auffälligkeiten durch die Polizei und den Blutentnahmearzt noch die Beurteilung des Beeinflussungsgrades durch den Arzt waren jeweils mit den Serumspiegeln an THC oder 11-OH-THC (Carbonsäure) korreliert. Die Ergebnisse zeigen, dass durch Einschätzungen von Polizei und Arzt weder Art und Grad der Beeinträchtigung konsistent erfasst noch Personen mit regelmäßigem und gelegentlichem Konsum sich mit der notwendigen Sicherheit voneinander trennen lassen. Welche Aspekte sich daraus in Hinblick auf die Fahreignungsdiagnostik ergeben, wird im letzten Kapitel angesprochen.
Im Forschungsbericht wird das Car-Sharing, also das organisierte Teilen von Kraftfahrzeugen, in Gemeinden unter 100.000 Einwohnern betrachtet. Nach einer begrifflichen Abgrenzung der verschiedenen Formen von Mobilitätsdienstleistungen auf Basis flexibler Autonutzung werden die Konkurrenzbeziehungen zwischen den beiden bedeutendsten Mobilitätsdienstleistungen - dem Car-Sharing und der Autovermietung - untersucht. Es stellt sich heraus, dass in einzelnen Marktsegmenten eine solche besteht. Darauf folgend wird eine umfassende Marktanalyse vorgestellt. Für die kleinen Gemeinden mit weniger als 20.000 Einwohnern wurde eine schriftliche Befragung zum Thema durchgeführt, zu den mittleren Gemeinden zwischen 20.000 und 100.000 Einwohnern eine entsprechende Internetrecherche. Die Untersuchung zeigt, dass Car-Sharing in kleinen und mittleren Gemeinden im Vergleich zu den Großstädten geringer verbreitet ist. Eine Analyse der Wirtschaftlichkeit von Car-Sharing in kleinen und mittleren Gemeinden ergab, dass vor allem in den kleinen Gemeinden häufig die Rahmenbedingungen für Car-Sharing ungünstig sind. Dies betrifft vor allem die Siedlungsstruktur, welche mit abnehmender Gemeindegröße das Entstehen und Wachsen von Car-Sharing behindert. Auch der Öffentliche Personennahverkehr (ÖPNV) ist häufig mangelhaft. Weiterhin können Kostenvorteile größerer Organisationen identifiziert werden. Sie kommen vor allem in kleineren Gemeinden nur dann zum Tragen, wenn das Car-Sharing vor Ort als Filialbetrieb organisiert wird. Kostennachteile kleiner Organisationen können allerdings durch ehrenamtliche Tätigkeit zum Teil kompensiert werden. Auch das in Großstädten häufig praktizierte Eingehen von Kooperationen mit Verkehrsbetrieben kann vor allem in den kleineren Gemeinden aus Mangel an Möglichkeiten kaum praktiziert werden. Darüber hinaus gibt es bestimmte kritische Unternehmensphasen, die in kleinen und mittleren Gemeinden eine relativ große Rolle spielen. Im Rahmen von Fallstudien wurden Expertengespräche bei Vertretern von Car-Sharing-Organisationen geführt. Dabei wurden die zuvor erarbeiteten Erkenntnisse auf ihre Praxisrelevanz hin überprüft. Es zeigt sich, dass die aufgezeigten Probleme in kleinen und mittleren Gemeinden in der Praxis relevant sind. Die Fallstudien zeigen aber auch, dass auch in kleinen und mittleren Gemeinden Car-Sharing wirtschaftlich und zum Teil mit beachtlichen Nutzerzahlen betrieben werden kann. Für kleine Gemeinden sind spezielle Modelle entwickelt worden, die Car-Sharing auch mit sehr geringen Nutzerzahlen ermöglichen. Die Nutzung von Car-Sharing durch Gemeindeverwaltungen oder Firmen kann für eine bestimmte Grundauslastung der Fahrzeuge sorgen und so einen Standort sichern. Schließlich wird aufgezeigt, welche vielfältigen Möglichkeiten Gemeindeverwaltungen haben, das Car-Sharing in ihrem Gemeindegebiet zu unterstützen. Neben der eigenen Teilnahme am Car-Sharing, die auch für die Gemeindeverwaltung vorteilhaft sein kann, ist hier auch die Bereitstellung von Infrastruktur (zum Beispiel von Stellplätzen) oder die Bestellung von Car-Sharing-Leistungen in Orientierung an der Aufgabenträgerschaft des öffentlichen Personennahverkehrs denkbar. Eine Bestätigung der bis dahin gewonnenen Erkenntnisse liefert die Auswertung einer schriftlichen Befragung sämtlicher deutscher Car-Sharing-Organisationen, welche in Zusammenarbeit mit den Bearbeitern eines Parallelprojektes durchgeführt wurde (FE 77.461/2001: Bestandsaufnahme und Möglichkeiten der Weiterentwicklung des Car-Sharing). Auf der geschaffenen Wissensgrundlage werden vier Car-Sharing-Modelle dargestellt, die den besonderen Erfordernissen in kleinen und mittleren Gemeinden angepasst sind. Es handelt sich dabei um herkömmliches Car-Sharing, das sog. Einbringermodell, Car-Sharing mit Deckungsgarantie sowie privates Autoteilen auf vertraglicher Basis. Die Modelle werden im Forschungsbericht erläutert und mit Beispielen aus der Praxis belegt. Abschließend wird weiterer Forschungsbedarf aus Sicht der Projektbearbeiter aufgezeigt.
The presence and performance of Advanced Driver Assistance Systems (ADAS) has increased over last years. Systems available on the market address also conflicts with vulnerable road users (VRUs) such as pedestrians and cyclists. Within the European project PROSPECT (Horizon2020, funded by the EC) improved VRU ADAS systems are developed and tested. However, before determining systems" properties and starting testing, an up-to-date analysis of VRU crashes was needed in order to derive the most important Use Cases (detailed crash descriptions) the systems should address. Besides the identified Accident Scenarios (basic crash descriptions), this paper describes in short the method of deriving the Use Cases for car-to-cyclist crashes. Method Crashes involving one passenger car and one cyclist were investigated in several European crash databases looking for all injury severity levels (slight, severe and fatal). These data sources included European statistics from CARE, data on national level from Germany, Sweden and Hungary as well as detailed accident information from these three countries using GIDAS, the Volvo Cars Cyclist Accident database and Hungarian in-depth accident data, respectively. The most frequent accident scenarios were studied and Use Cases were derived considering the key aspects of these crash situations (e.g., view orientation of the cyclist and the car driver- manoeuvre intention) and thus, form an appropriate basis for the development of Test Scenarios. Results Latest information on car-to-cyclist crashes in Europe was compiled including details on the related crash configurations, driving directions, outcome in terms of injury severity, accident location, other environmental aspects and driver responsibilities. The majority of car-to-cyclist crashes occurred during daylight and in clear weather conditions. Car-to-cyclist crashes in which the vehicle was traveling straight and the cyclist is moving in line with the traffic were found to result in the greatest number of fatalities. Considering also slightly and seriously injured cyclists led to a different order of crash patterns according to the three considered European countries. Finally the paper introduced the Use Cases derived from the crash data analysis. A total of 29 Use Cases were derived considering the group of seriously or fatally injured cyclists and 35 Use Cases were derived considering the group of slightly, seriously or fatally injured cyclists. The highest ranked Use Case describes the collision between a car turning to the nearside and a cyclist riding on a bicycle lane against the usual driving direction. A unified European dataset on car-to-cyclist crash scenarios is not available as the data available in CARE is limited, hence national datasets had to be used for the study and further work will be required to extrapolate the results to a European level. Due to the large number of Use Cases, the paper shows only highest ranked ones.
Causation of traffic accidents with children from the perspective of all involved participants
(2017)
In the year 2014 about 2,800 children between zero and 14 years got injured due to traffic accidents in Austria. More than 50% were taking part in traffic as active road users like cyclists or pedestrians. Within this study 46 real world traffic accidents between vehicles and children as pedestrians were analysed. In 39 cases, car drivers hit the crossing children. In the other cases, the collision opponents were busses, trucks or motorcycles. Most of the children got hit while crossing a road at urban sites. By analysing the traffic accidents from the perspectives of all involved participants, vehicle drivers and injured children, it is possible to identify factors for each participant, which led to the accident and factors that contributed the accident. The main task is to find patterns in the behaviour of crash victims (children and driver) before the collision. One important fact is that in more than 50% of the analysed cases sight obstructions were an important contributing factor for both, the driver and the child. From drivers view situations in which the child moved unexpected into the driven road lane were often found. For the injured child, factors like: no attention to the road traffic or no sufficient traffic observation were found to be relevant. Further it- possible to sensitise children and adults to possible source of critical traffic situations according to the findings of this study.
Causation patterns and data collection blind spots for fatal intersection accidents in Norway
(2010)
Norwegian fatal intersection accidents from the years 2005-2007 were analysed to identify any causation patterns among their underlying contributing factors, and also to evaluate whether the data collection and documentation procedures used by the Norwegian in-depth investigation teams produces the information necessary to perform causation pattern analysis. A total of 28 fatal accidents were analysed. Details on crash contributing factors for each driver in each crash were first coded using the Driving Reliability and Error Analysis Method (DREAM), and then aggregated based on whether the driver was going straight or turning. Analysis results indicate that turning drivers to a large extent are faced with perception difficulties and unexpected behaviour from the primary conflict vehicle, while at the same time trying to negotiate a demanding traffic situation. Drivers going straight on the other hand have less perception difficulties. Instead, their main problem is that they largely expect turning drivers to yield. When this assumption is violated, they are either slow to react or do not react at all. Contributing factors often pointed to in literature, e.g. high speed, drugs and/or alcohol and inadequate driver training, played a role in 12 of 28 accidents. While this confirms their prevalence, it also indicates that most drivers end up in these situations due to combinations of less auspicious contributing factors. In terms of data collection and documentation, information on blunt end factors (those more distant in time/space, yet important for the development of events) was more limited than information on sharp end factors (those close in time/space to the crash). A possible explanation is that analysts may view some blunt end factors as event circumstances rather than contributing factors in themselves, and therefore do not report them. There was also an asymmetry in terms of reported obstructions to view due to signposts and vegetation. While frequently reported as contributing for turning drivers, they were rarely reported as contributing for their counterparts in the same accidents. This probably reflects an involuntary focus of the analyst on identifying contributing factors for the driver legally held liable, while less attention is paid to the driver judged not at fault. Since who to blame often is irrelevant from a countermeasure development point of view, this underlying investigator mindset needs addressing to avoid future bias in crash investigation reports.
Introduction: The incidence of trauma-related cervical-spine fractures is 19-88 / 100.000. In contrast, the incidence of cervical spine injuries is as high as 19% - 51% of all spinal trauma. Cervical spine injuries in non-polytrauma patients are rare. However, due to the potential damage to the spinal cord these traumata are feared and mustn't be missed. Cervical spine injuries represent the highest reported early mortality rate of all spinal trauma. The rate of functional impairment afterwards is high and the rate of reintegration into work is low compared to other organ systems. In the past, trauma surgeons often did x-rays of the cervical spine with low inhibition threshold and often without strong clinical suggestion for vertebral or discoligamental injuries. This practice was queried by the Canadian C-Spine rule and extensively discussed in the past. Therefore we did a retrospective study whether non-polytrauma patients benefit from cervical spine x-rays.
Event data recorders (EDRs) are a valuable tool for in-depth investigation of traffic accidents. EDRs are installed on the airbag control module (ACM) to record vehicle and occupant information before, during, and after a crash event. This study evaluates EDR characteristics and aims at better understanding EDR performance for the improvement of accident reconstruction with more reliable and accurate information regarding accidents. The analysis is based on six crash tests with corresponding EDR datasets.
The national accident statistics demonstrate that the situation of passenger car side impacts is dominated by car to car accidents. Car side to pole impacts are relatively infrequent events. However the importance of car side to pole impacts is significantly increasing with fatal and seriously injured occupants. For the present study the German in-depth database GIDAS (German In-Depth-Accident Study) and the UK based database CCIS (Co-operative Crash Injury Study) were used. Two approaches were undertaken to better understand the scenario of car to pole impacts. The first part is a statistical analysis of passenger car side to pole impacts to describe the characteristics and their importance relevant to other types of impact and to get further knowledge about the main factors influencing the accident outcome. The second part contains a case by case review on passenger cars first registered 1998 onwards to further investigate this type of impact including regression analysis to assess the relationship between injury severity and pole impact relevant factors.
Powered Two Wheelers (PTWs) accidents constitute one of the road safety problems in Europe. PTWs fatalities represent 22% at EU level in 2006, having increased during last years, representing an opposite trend compared to other road users" figures. In order to reduce these figures it is necessary to investigate the accident causation mechanisms from different points of view (e.g.: human factor, vehicle characteristics, influence of the environment, type of accident). SAFERIDER project ("Advanced telematics for enhancing the SAFEty and comfort of motorcycle RIDERs", under the European Commission "7th Framework Program") has investigated PTW accident mechanisms through literature review and statistical analyses of National and In-depth accident databases; detecting and describing all the possible PTW's accident configurations where the implementation of ADAS (Advanced Driver Assistance Systems) and IVIS (In-Vehicle Information Systems) could contribute to avoid an accident or mitigate its severity. DIANA, the Spanish in-depth database developed by CIDAUT, has been analyzed for that purpose. DIANA comprises of accident investigation teams, in close cooperation with police forces, medical services, forensic surgeons, garages and scrap yards. An important innovation is the fact that before injured people arrive to hospitals, photographs and explanations about the possible accident injury mechanisms are sent to the respective hospitals (via 3G GPRS technology). By this, additional information to medical staff can be provided in order to predict in advance possible internal injuries and select the best medical treatment. This methodology is presented in this paper. On the other hand, the main results (corresponding to road, rider and PTW characteristics; pre and post-accident manoeuvres; road layout; rider behaviour; impact points; accident causations;...) from the analyses of the PTW accidents used for SAFERIDER are shown. Only accident types relevant to ADAS and IVIS devices have been considered.
Urban runoff is known to transport a significant pollutant load consisting of e.g. heavy metals, salts and hydrocarbons. Interactions between solid and dissolved compounds, proper understanding of particle size distribution, dissolved pollutant fractions and seasonal variations is crucial for the selection and development of appropriate road runoff treatment devices. Road runoff at an arterial road in Augsburg, Germany, has been studied for 3.5 years. A strong seasonal variation was observed, with increased heavy metal concentrations with doubled and tripled median concentrations for heavy metals during the cold season. Correlation analysis showed that de-icing salt is not the only factor responsible for increased pollutant concentrations in winter. During the cold period, the fraction of dissolved metals was lower compared to the warm season. In road dust, the highest metal concentrations were measured for fine particles. Metals in road runoff were found to show a significant correlation to fine particles SS63 (<63 μm). Therefore, it is debatable whether treatment devices only implementing sedimentation processes provide sufficient removal rates.
Zielstellung der hier vorliegenden Arbeit war die Entwicklung eines Verfahrens zur Charakterisierung der akustischen Eigenschaften offenporiger Straßenbeläge in situ. Das Verfahren sollte auf indirektem Wege quantitative Aussagen über den zu erwartenden Fahrzeuggeräuschpegel LVeh nach der Methode der "Statistischen Vorbeifahrt" (DIN EN IS0 11819-1) liefern, sich unproblematisch durchführen lassen und tolerant gegenüber Störeinflüssen aus der Umgebung sein. Innerhalb der Untersuchungen wurden daher in situ Messverfahren verwendet und gegebenenfalls weiterentwickelt, bei denen davon auszugehen ist, dass sie Aussagen zum Einfluss der beiden Hauptmechanismen der lärmmindernden Wirkung offenporiger Asphalte, nämlich der Reduzierung des "Airpumping-Effekts" und der Schallabsorption im Nah- und Fernfeld vom Reifen, erlauben. Als Verfahren kamen dabei zur Anwendung: - Messung der Wasserdurchlässigkeit , - Messung und Schätzung des Strömungswiderstandes Messung des Schallabsorptionsgrades nach DIN ISO 13472, Teil 1 , - Schallausbreitungsmessungen. Diese Messverfahren sind an sieben Orten auf Bundesautobahnen eingesetzt worden. Die Ergebnisse der Messungen wurden anschließend mit nahezu zeitgleich bestimmten Fahrzeuggeräuschpegeln korreliert. Auf die Korrelation der Ergebnisse des Schätzverfahrens zur Bestimmung des Strömungswiderstands wurde dabei jedoch verzichtet, da es sich während der Untersuchungen herausstellte, dass dieses Verfahren eine nur unzureichende Genauigkeit aufweist. Als wesentliches Ergebnis der Untersuchungen zur Korrelation kann festgehalten werden, dass zur indirekten Bestimmung der lärmmindernden Wirkung von offenporigen Asphalten zwei Verfahren, die Messung des effektiven spezifischen Strömungswiderstandes R' und die Bestimmung des Schallabsorptionsgrades a, gleichberechtigt Anwendung finden müssen. Der effektive spezifische Strömungswiderstand R's soll dabei in der Rollspur des ersten Fahrstreifens gemessen werden. Die Bestimmung des Schallabsorptionsgrades a ist dagegen in der Mitte des ersten Fahrstreifens durchzuführen.
Road authorities, freight, and logistic industries face a multitude of challenges in a world changing at an ever growing pace. While globalization, changes in technology, demography, and traffic, for instance, have received much attention over the bygone decades, climate change has not been treated with equal care until recently. However, since it has been recognized that climate change jeopardizes many business areas in transport, freight, and logistics, research programs investigating future threats have been initiated. One of these programs is the Conference of European Directors of Roads (CEDR) Transnational Research Programme (TRP), which emerged about a decade ago from a cooperation between European National Road Authorities and the EU. This paper presents findings of a CEDR project called CliPDaR, which has been designed to answer questions from road authorities concerning climate-driven future threats to transport infrastructure. Pertaining results are based on two potential future socio-economic pathways of mankind (one strongly economically oriented "A2" and one more balanced scenario "A1B"), which are used to drive global climate models (GCMs) producing global and continental scale climate change projections. In order to achieve climate change projections, which are valid on regional scales, GCM projections are downscaled by regional climate models. Results shown here originate from research questions raised by European Road Authorities. They refer to future occurrence frequencies of severely cold winter seasons in Fennoscandia, to particularly hot summer seasons in the Iberian Peninsula and to changes in extreme weather phenomena triggering landslides and rutting in Central Europe. Future occurrence frequencies of extreme winter and summer conditions are investigated by empirical orthogonal function analyses of GCM projections driven with by A2 and A1B pathways. The analysis of future weather phenomena triggering landslides and rutting events requires downscaled climate change projections. Hence, corresponding results are based on an ensemble of RCM projections, which was available for the A1B scenario. All analyzed risks to transport infrastructure are found to increase over the decades ahead with accelerating pace towards the end of this century. Mean Fennoscandian winter temperatures by the end of this century may match conditions of rather warm winter season experienced in the past and particularly warm future winter temperatures have not been observed so far. This applies in an even more pronounced manner to summer seasons in the Iberian Peninsula. Occurrence frequencies of extreme climate phenomena triggering landslides and rutting events in Central Europe are also projected to rise. Results show spatially differentiated patterns and indicate accelerated rates of increases.
The average CO2 concentrations relevant to a motorcyclist wearing an integral helmet were measured twenty years ago and found to be alarmingly high. The present study examined gas concentrations typically inhaled by a motorcyclist. Average concentrations of CO2 for persons (n=4) wearing integral motorcycle helmets were measured in the laboratory and the field to facilitate comparison to previous work, and similarly high average concentrations were found: above 2% when stationary, well below 1% for speeds of 50km/h or more. Detailed measurements of the time-dependent CO2 concentrations during normal inhalation showed levels of about half of the corresponding average concentrations, including 1% at standstill, though higher concentrations (4% or more) are inhaled at the beginning of each breath. Opening the visor at standstill lowered the average inhaled concentration only to about 0.8%. The oxygen deficiency is equal to the CO2 concentration, and could also contribute negatively to motorcyclist cognitive abilities.
Measuring and characterizing airborne particulate matter (PM) is an important research area because PM can lead to impacts on health and to visibility reduction, material damage and groundwater pollution. In regard to road dust, suspension and re-suspension and the contribution of non-exhaust PM to total traffic emissions are expected to increase as a result of predicted climate scenarios. European environmental regulations have been enforced to reduce exhaust particle emissions from road traffic, but little attention has been paid to reducing non-exhaust coarse particle emissions due to traffic. Therefore, a monitoring program for coarse PM has been initiated in early 2013 to assess the predicted increase in the abundance of non-exhaust particles. Particle sampling was performed with the passive-sampler technique Sigma-2. The subsequent single-particle analysis allows for characterization of individual particles, determination of PM size distribution, and calculation of PM mass concentrations. Two motorways n ear Cologne (Koeln), Germany were selected as sampling sites, and the experimental setup in the field was realized with a so-called twin-site method. The present study reports single-particle analysis data for samples collected between May 31, 2013 and May 30, 2014. Coarse PM, generated through multi-source mechanisms, consists of, e.g., tire-wear, soot aggregates, and mineral dust. The highest mass concentration occurs at both motorways in spring, and the observed PM mainly contains traffic-abrasion particles. The field measurements show that the minimum PM concentration was found in the 5 to 12-°C temperature range, whereas the maximum concentration was observed in both the "5 to 5-°C and the 12 to 24-°C ranges, in agreement with previous laboratory measurements. Correlation between super-coarse (d p 10"80 μm, geometric equivalent diameter) PM concentration and precipitation displays a significant increase in concentration with decreasing number of precipitation events (dry weather periods).
This paper uses the national accident statistics of Great Britain to evaluate the effectiveness of Electronic Stability Control Systems (ESC) to reduce crash involvement rates. The crash experience of 8,951 cars is analysed and compared to a closely matching set of non-ESC cars using case-control methods. This is one of the largest ESC samples analysed to date. Overall the cars with ESC are involved in 3% fewer crashes although the effectiveness is substantially higher under conditions of adverse road friction. ESC equipped cars are involved in 15% fewer fatal crashes although this reduction represents the combined effect of ESC and passive safety improvements.
One goal of the assessment of the crashworthiness of passenger cars is to characterize the potential of injury outcome to occupants of cars involved in an accident. This can be achieved by the help of an index that puts the number of injured occupants of passenger cars in relation to the number of cars involved in an accident. As a consequence, this index decreases with a lower potential of injury and rises with a higher number of injuries while assuming a fixed number of accidents. Another index is introduced that uses an economical weighting of each injury level. The consequential injury costs are calculated using the average economical costs for lightly, severely and fatally injured persons. The calculation of the safety indices is based on an anonymized sample of accident data provided by the Federal Statistical Office. An index of Mercedes passenger car drivers depending on the year of registration between 1991 and 2006 is compared to the index of drivers of cars of other makes within the same range of registration years.
Cycle helmets have continued to increase in popularity since their introduction half a century ago. Many studies indicate that overall, head injury can be significantly reduced by wearing them. This study was conducted using two distinct sets of real-world cycling collision data from Ireland, namely cases involving police collision reports and cases involving admission to a hospital emergency department. The analyses sought to simulate and analyse the protective performance of cycle helmets in such collision scenarios, by comparing the Head Injury Criterion score and peak head accelerations, both linear and angular. Cycle collisions were simulated using the specialised commercial software MADYMO. From the simulation results, these key metrics were compared between the same-scenario helmeted and unhelmeted cyclist models. Results showed that the inclusion of bicycle helmets reduced linear accelerations very significantly, but also increased angular accelerations significantly compared to unhelmeted situations. Given the modest protective performance of cycle helmets against angular accelerations, it is recommended that cycle helmet manufacturers and international test standards need to pay more attention to head angular accelerations.
This study aimed at comparing head Wrap Around Distance (WAD) of Vulnerable Road User (VRU) obtained from the German in-depth Accident Database (GIDAS), the China in-depth Accident Database (CIDAS) and the Japanese in-depth Accident Database (ITARDA micro). Cumulative distribution of WAD of pedestrian and cyclist were obtained for each database (AIS2+) showing that WAD of cyclists were larger than the ones of pedestrians. Comparing three regions, the 50%tile WAD of GIDAS was larger than that of both Asian accident databases. Using linear regression that might predict WAD of pedestrians and cyclists from Impact speed and VRU height, WADs were calculated to be 206cm/219cm (Pedestrian/Cyclist) for GIDAS, 170cm/192cm for CIDAS and 211cm/235cm for ITARDA. In addition, this study may be helpful for reconsideration of WAD measurement alignment between accident reconstruction and test procedures.
A series of drop tests and vehicle tests with the adult head impactor according to Regulation (EC) 631/2009 and drop tests with the phantom head impactor according to UN Regulation No. 43 have been carried out by the German Federal Highway Research Institute (BASt) on behalf of the German Federal Ministry of Transport, Building and Urban Development (BMVBS). Aim of the test series was to study the injury risk for vulnerable road users, especially pedestrians, in case of being impacted by a motor vehicle in a way described within the European Regulations (EC) 78/2009 and (EC) 631/2009. Furthermore, the applicability of the phantom head drop test described in UN Regulation No. 43 for plastic glazing should be investigated. In total, 30 drop tests, thereof 18 with the adult head impactor and 12 with the phantom head impactor, and 49 vehicle tests with the adult head impactor were carried out on panes of laminated safety glass (VSG), polycarbonate (PC) and laminated polycarbonate (L-PC). The influence of parameters such as the particular material properties, test point locations, fixations, ambient conditions (temperature and impact angle) was investigated in detail. In general, higher values of the Head Injury Criterion (HIC) were observed in tests on polycarbonate glazing. As the HIC is the current criterion for the assessment of head injury risk, polycarbonate glazing has to be seen as more injurious in terms of vulnerable road user protection. In addition, the significantly higher rebound of the head observed in tests with polycarbonate glazing is suspected to lead to higher neck loads and may also cause higher injury risks in secondary impacts of vulnerable road users. However, as in all tests with PC glazing no damage of the panes was observed, the risk of skin cut injuries may be expected to be reduced significantly. The performed test series give no indication for the test procedure prescribed in UN Regulation No. 43 as a methodology to approve glass windscreen not being feasible for polycarbonate glazing, as all PC panes tested fulfilled the UN R 43 requirements. The performance of the windscreen area will not be relevant for vehicle type approval according to the upcoming UN Regulation for pedestrian protection. However, it is recommended that pedestrian protection being considered for plastic windscreens to ensure at least the same level of protection as glass windscreens.
The aim of this study is to investigate the differences in car occupant injury severity recorded in AIS 2005 compared to AIS 1990 and to outline the likely effects on future data analysis findings. Occupant injury data in the UK Cooperative Crash Injury Study Database (CCIS) were coded for the period February 2006 to November 2007 using both AIS 1990 and AIS 2005. Data for 1,994 occupants with over 6000 coded injuries were reviewed at the AIS and MAIS level of severities and body regions to determine changes between the two coding methodologies. Overall there was an apparent general trend for fewer injuries to be coded at the AIS 4+ severity and more injuries to be coded at the AIS 2 severity. When these injury trends were reviewed in more detail it was found that the body regions which contributed the most to these changes in severity were the head, thorax and extremities. This is one of the first studies to examine the implications for large databases when changing to an updated method for coding injuries.
In this study, we compared the injury severity of occupants according to the seating position and the crashing direction in motor vehicle accidents. In the driver's point of view, it was separated the seating position as "Near-side" and "Far-side". The study subjects were targeted by people who visited 4 regional emergency centers following motor vehicle accidents. Real-world investigation was performed by direct and indirect methods after patient- consent. The information of the damaged vehicle was informed by Collision Deformation Classification (CDC) code and the information of the injury of patients was informed by using the Abbreviated Injury Score (AIS) and Injury Severity Score (ISS). When the column 3 in CDC code was P, damaged at the middle part of lateral side, the average point of AIS 3 was 1.91-±1.72 in near-side and 1.02-±1.31 in far-side (p<0.01). The average point of maximum AIS (MAIS) was 2.78-±1.39 in near-side and 2.02-±1.11 in far-side (p<0.01). The average point of ISS was 15.74-±14.71 in near-side and 8.11-±8.39 in far-side (p<0.01). Also, when the column 3 in CDC code was D, damaged at the whole part of lateral side, it was significant that the average point of AIS 3 and MAIS in near-side was bigger than in far-side (p=0.02).
For the determination of the road surface roughness common methods have been established, like Skid Resistance Tester (SRT) or the Sideway-force Coefficient Routine Investigation Machine (SCRIM). Both methods are used to measure a comparable and reliable maximum friction potential value and to assess the quality of the road surface. However, the comparison of the measurements under real conditions and the results of measurements with SRT and SCRIM showed only minor correlations. The paper shows the comparison between these standardised methods and real vehicle braking tests and discusses the results.
In the European Project FIMCAR, a proposal for a frontal impact test configuration was developed which included an additional full width deformable barrier (FWDB) test. Motivation for the deformable element was partly to measure structural forces as well as to produce a severe crash pulse different from that in the offset test. The objective of this study was to analyze the safety performance of vehicles in the full width rigid barrier test (FWRB) and in the full width deformable barrier test (FWDB). In total, 12 vehicles were crashed in both configurations. Comparison of these tests to real world accident data was used to identify the crash barrier most representative of real world crashes. For all vehicles, the airbag visible times were later in the FWDB configuration. This was attributed to the attenuation of the initial acceleration peak, observed in FWRB tests, by the addition of the deformable element. These findings were in alignment with airbag triggering times seen in real world crash data. Also, the dummy loadings were slightly worse in FWDB compared to FWRB tests, which is possibly linked to the airbag firing and a more realistic loading of the vehicle crash structures in the FWDB configuration. Evaluations of the lower extremities have shown a general increasing of the tibia index with the crash pulse severity.
In order to enable foreseeing or comparing the benefit of safety systems or driver assistance systems in Germany, in the United States and in Japan, the traffic accident databases in those three countries are examined. The variables used are culpable party, collision partner, accident type, and injury level and the method to re-classify the databases for comparison are proposed. The result indicates that single passenger car fatality is the most frequent in Germany and in the United States, while passenger car vs. pedestrian is the most frequent fatality scenario in Japan. When the casualty by fatality ratio is focused, the greatest difference is observed in rear-end collisions. The ratio of slight injuries in Japan yields about eighteen times as many as those in Germany, and about eight times as many as those in the United States.
In recent years the boundaries between active and passive safety blurred more and more. Passive safety in the traditional term includes all safety aspects to prevent occupants to be injured or at least injury severity should be reduced. Passive Safety starts with the collision (first vehicle contact) and ends with rescue (open vehicle doors). Within this phase the occupant has to be protected by the passenger compartment whereby no intrusion should occur. Active safety on the other side was developed to interact prior to the collision whereby the goal is to prevent accidents. The extensive interaction between active and passive safety led to the terminologies "Primary" and "Secondary" safety whereas the expression Integrated Safety Concept was generated. Within this study the most well documented single vehicle accidents with cars not equipped with ESP were identified from the PENDANT database and reconstructed. Additional cases were found in the database ZEDATU of TU Graz. In comparison each case was simulated with the assumption that the cars were equipped with ESP. The differences regarding accident avoidance or crash severity as well as reduction of injury risk were analysed.
The levels of continuous vehicle automation have become common knowledge. They facilitate overall understanding of the issue. Yet, continuous vehicle automation described therein does not cover "automated driving" as a whole: Functions intervening temporarily in accident-prone situations can obviously not be classified by means of continuous levels. Continuous automation describes the shift in workload from purely human driven vehicles to full automation. Duties of the driver are assigned to the machine as automation levels rise. Emergency braking, e.g., is obviously discontinuous and intensive automation. It cannot be classified under this regime. The resulting absence of visibility of these important functions cannot satisfy " especially in the light of effect they take on traffic safety. Therefore, in order to reach a full picture of vehicle automation, a comprehensive approach is proposed that can map out different characteristics as "Principle of Operation" at top level. On this basis informing and warning functions as well as functions intervening only temporarily in near-accident situations can be described. To reach a complete picture, levels for the discontinuous, temporarily intervening functions are proposed " meant to be the counterpart of the continuous levels already in place. This results in a detailed and independent classification for accident-prone situations. This finally provides for the visibility these important functions deserve.
Accidents involving two wheels vehicles represent one of the more important types of accidents in Europe. These accidents are usually not easy to reconstruct specially for the analysis of the injuries and its correlation with accident dynamics and evidences. Different methodologies are applied in this work for the reconstruction of two wheeler accidents, especially accident involving motorcycles. From the typologies of road evidences like skid marks, to the use of Pc-Crash and the use of Madymo models, different reconstruction of real accidents are presented. One of the questions that sometimes arise for legal purposes when some type of head injuries arise is if the occupant was wearing or not a helmet. The correlation of head injuries with the use of the helmet is a very important issue, therefore an important legal aspect. One of the key questions for the reconstructions that is difficult to analyze, is if the vehicle occupant, was or not, wearing the helmet. Based on the previously collected information, a generic model of a helmet was developed on CAD 3D, followed by its conversion into finite elements, all in order to perform impact tests using the Madymo software that would help improve the helmet- safety, but that also can be used as a tool in accident reconstruction.
Das Ziel des Projektes war eine Bestandsaufnahme des Einsatzes computerbasierter Lehr-Lern-Medien in der Fahranfängervorbereitung und ihrer Anwendung im In- und Ausland. Darauf aufbauend sollten die Anforderungen herausgearbeitet werden, die an eine künftige umfassende Einbeziehung dieser Medien in die Fahranfängervorbereitung zu stellen sind. Zunächst wurde eine umfangreiche Recherche zu Erfassung der national und international in Anwendung befindlichen Lehr-Lern-Medien durchgeführt. Daraufhin konnte eine erste grobe Kategorisierung der Applikationen vorgenommen werden. Zudem zeigte sich, dass die Verbreitung verschiedener Produktgruppen im internationalen Vergleich stark variiert und ganz entscheidend von den jeweiligen gesetzlichen Rahmenbedingungen abhängt. Es folgte die Ableitung einer Systematisierungsgrundlage, mit Hilfe derer computergestützte Lehr-Lern-Medien detailliert betrachtet und bewertet werden können. Diese Systematisierungsgrundlage basiert in wesentlichen Teilen auf Erkenntnissen der Lehr-Lern-Forschung speziell im Bereich des E-Learning. Unter Beachtung einschlägiger Arbeiten im Bereich der Verkehrspsychologie, insbesondere zum Thema der Fahraufgabe. wurde ein starker Fokus auf den Erwerb fahraufgabenrelevanter Wissensinhalte beziehungsweise Kompetenzen gelegt. Anschließend wurden ausgewählte computerbasierte Lehr-Lern-Medien vor dem Hintergrund der zuvor erarbeiteten Systematisierungsgrundlage betrachtet und bewertet. Zudem wurden die Möglichkeiten, die sich durch die Nutzung derartiger Anwendungen ergeben, diskutiert sowie diesbezügliche Grenzen des bestehenden Systems der Fahrausbildung identifiziert. Im abschließenden Ausblick konnten Entwicklungspotentiale im Bereich der computerbasierten Lehr-Lern-Medien aufgezeigt sowie Empfehlungen zur Verbesserung der bisherigen Praxis der Fahranfängervorbereitung formuliert werden.
Because of actual developments and the continuous increase in the field of drive assistant systems, representative and detailed investigations of accident databases are necessary. This lecture describes the possibility to estimate the potential of primary and secondary safety measures by means of a computerized case by case analysis. Single primary or secondary safety measures as well as a combination of both are presented. The method is exemplarily shown for the primary safety measure "Brake Assist" in pedestrian accidents. Regarding accident prevention only the primary safety measure is determined.
The fact that ADAC Air Rescue handles approximately 4,000 road accident missions every year gave rise to set up an accident research programme for which ADAC Air Rescue provides its data. This data is of initial informational quality and will be supplemented by data from the police, experts, fire brigades as well as hospitals and forensic institutes. Although the number of cases is still rather low, certain tendencies can be identified. The causes for most accidents occur when joining or intersecting traffic, followed by speeding in road bends and tailgating. Many accidents involve HGV rear end collisions, often causing serious injuries, considerable damage and technical problems for the rescue operations. With regard to the various impact types, it has become obvious that most of the extremely serious injuries are inflicted during a passenger car side impact. In addition, access to and removal of trapped passengers is becoming more and more complicated, partly due to the increasing use of high-strength materials, and rescue operations tend to be more time consuming.
The current paper reports on the results of a pilot study aiming to investigate the effect of mobile telephone use on the driving performance of 5 amateur and 5 professional drivers. Their driving acuity was tested through a driving simulator. Analysis and interpretation of the results occurred comparing the drivers' driving performance while talking, reading messages and writing a message on the mobile phone (intervention time) with the drivers' driving performance engaged in no activity (control time). The variables affected by the mobile phone were the "steering", the "lane offset" and the "duration of lane offset". Moreover, the drivers involved in a car crash in the last five years appeared to differ from those who were not involved in a crash in both "lane offset" and "following distance". The results of this pilot study will inform the design of a large experimental study on 50 professional and 50 amateur drivers.
The Netherlands is on the way to change its existing skid resistance measuring method for its highway network from the Dutch RAW 72, a longitudinal force method, to the Sideway Force method. This method is described in the Technical Specification 15901-8 (SKM device) as well as 15901-6 (SCRIM device) and is in use in 9 European countries. The CEN TC 227 WG5 on Surface Characteristics is currently working on combining of these two technical Specifications into a European standard for Sideway-Force (SWF) measurement devices. The idea of this change in the Netherlands was perceived in 2013 and since then a lot of meetings have been held with the different Dutch decision makers as well as with countries which currently operate SWF devices. There was an intensive exchange of knowledge about these devices and their corresponding quality assurance systems, because the Netherlands wanted to incorporate and rely on an existing system of a neighbor country without losing their present level of quality. The Netherlands has therefore decided to incorporate the German SKM approach. The network monitoring with the new system will start in 2017. To ensure the quality of skid resistance measurements and further cooperation in this field, it has been decided to initiate an alliance between BASt and the Dutch road owner Rijkswaterstaat (RWS). This alliance will facilitate an exchange of research activities, calibration of the Dutch systems according to the existing German Standard as well as control measurements with a BASt-device on the Dutch network during the network monitoring. During 2016 also comparative measurements will be performed on a network level with the current Dutch device and with an SKM device to determine a conversion between the two and to be able to define new threshold values.
Active safety systems are aimed at accident prevention, hence the knowledge required for their development is different from that required for passive safety systems aimed at injury prevention. Particularly, knowledge about accident causation is required. When looking at existing accident causation data, it is argued it fails to explain in sufficient detail how and why the accidents occur. Therefore, there is a need for detailed micro-level descriptions of accident causation mechanisms, and also of methodologies suitable for creating such descriptions. One study addressing these needs is the Swedish project FICA (Factors Influencing the Causation of Accidents and Incidents), where an accident investigation methodology suitable for active safety is developed, and in-depth accident investigations following this methodology are carried out on-scene in the area of Gothenburg by a multidisciplinary team. A preliminary aggregated analysis of different cases shows that the methodology developed is adequate for pointing out common contributing factors and devising principal countermeasures.
Crash involvement studies using routine accident and exposure data : a case for case-control designs
(2009)
Fortunately, accident involvement is a rare event: the chance of an individual road user trip to end up in a crash is close to zero. Thus, according to general epidemiological principles one can expect the case-control study design to be especially suitable for quantifying the relative risk (odds ratio) of accident involvement of road users with a certain risk factor as compared to road users that do not have this characteristic. Ideally, of course, the database for such a case-control study should be established by drawing two independent random samples of cases (accidental units) and controls (nonaccidental units), respectively. If, however, special data collection is not an option, it is nevertheless possible to analyze routine accident and exposure data under a case-control design in order to fully exploit the information contained in already existing databases. As a prerequisite, accident and exposure data from different sources are to be combined in a single file of micro or grouped data in a way consistent with the case-control study design. Among other things, the proposed methodological approach offers the possibility to use in-depth data of the GIDAS type also in investigations of active vehicle safety by combining this data with appropriate vehicle trip data collected in mobility surveys.