Sonstige
Filtern
Erscheinungsjahr
Dokumenttyp
Sprache
- Englisch (74) (entfernen)
Volltext vorhanden
- nein (74) (entfernen)
Schlagworte
- Bewertung (20)
- Evaluation (assessment) (19)
- Safety (18)
- Sicherheit (18)
- Anfahrversuch (16)
- Conference (16)
- Konferenz (16)
- Prüfverfahren (16)
- Test method (16)
- Impact test (veh) (15)
- Injury (15)
- Verletzung (15)
- Accident (13)
- Dummy (13)
- Unfall (13)
- Anthropometric dummy (12)
- Fußgänger (12)
- Pedestrian (12)
- Simulation (11)
- Collision (10)
- Europa (10)
- Europe (10)
- Deutschland (9)
- Driver assistance system (9)
- Frontalzusammenstoß (9)
- Germany (9)
- Head on collision (9)
- Zusammenstoß (9)
- Analyse (math) (8)
- Analysis (math) (8)
- Biomechanics (8)
- Biomechanik (8)
- Fahrerassistenzsystem (8)
- Fahrzeug (7)
- Radfahrer (7)
- Schweregrad (Unfall (7)
- Verletzung) (7)
- injury) (7)
- Cyclist (6)
- Head (6)
- Kopf (6)
- Messung (6)
- Schweregrad (Unfall, Verletzung) (6)
- Severity (accid, injury) (6)
- Vehicle (6)
- Car (5)
- Child (5)
- Datenbank (5)
- Driver (5)
- Fahrer (5)
- Kind (5)
- Knee (human) (5)
- Measurement (5)
- Passive safety system (5)
- Passives Sicherheitssystem (5)
- Risikobewertung (5)
- Risk assessment (5)
- Severity (accid (5)
- Standardisierung (5)
- Standardization (5)
- Transport infrastructure (5)
- Tunnel (5)
- Accident prevention (4)
- Alte Leute (4)
- Autobahn (4)
- Brustkorb (4)
- Compatibility (4)
- Deformation (4)
- Fatality (4)
- Impact test (4)
- Improvement (4)
- Insasse (4)
- Knie (menschl) (4)
- Kompatibilität (4)
- Leg (human) (4)
- Motorway (4)
- Reproducibility (4)
- Reproduzierbarkeit (4)
- Research project (4)
- Seitlicher Zusammenstoß (4)
- Side impact (4)
- Test (4)
- Thorax (4)
- Tödlicher Unfall (4)
- Unfallverhütung (4)
- Vehicle occupant (4)
- Verbesserung (4)
- Verkehrsinfrastruktur (4)
- Versuch (4)
- Autonomes Fahren (3)
- Autonomous driving (3)
- Behaviour (3)
- Bein (menschl) (3)
- Bemessung (3)
- Benutzung (3)
- Braking (3)
- Bremsung (3)
- Deformable barrier (impact test) (3)
- Deformierbare Barriere (Anpralltest) (3)
- Design (overall design) (3)
- Fahrzeuginnenraum (3)
- Forschungsarbeit (3)
- Gefahrenabwehr (3)
- Gesetzgebung (3)
- Hospital (3)
- Interior (veh) (3)
- Krankenhaus (3)
- Legislation (3)
- Modification (3)
- Motorcyclist (3)
- Motorradfahrer (3)
- Old people (3)
- Pkw (3)
- Security (3)
- Statistics (3)
- Statistik (3)
- Use (3)
- Verformung (3)
- Verhalten (3)
- Veränderung (3)
- Abdomen (2)
- Active safety system (2)
- Air pollution (2)
- Airbag (2)
- Aktives Sicherheitssystem (2)
- Anti locking device (2)
- Attitude (psychol) (2)
- Aufprallschlitten (2)
- Automatic (2)
- Automatisch (2)
- Autonomes Fahrzeug (2)
- Autonomous vehicle (2)
- Belastung (2)
- Boden (2)
- Cervical vertebrae (2)
- Classification (2)
- Climate change (2)
- Cost benefit analysis (2)
- Crash Test (2)
- Data acquisition (2)
- Data bank (2)
- Database (2)
- Datenerfassung (2)
- Dauerhaftigkeit (2)
- Detection (2)
- Detektion (2)
- Development (2)
- Driver information (2)
- Driving (veh) (2)
- Durability (2)
- Einstellung (psychol) (2)
- Electric vehicle (2)
- Elektrofahrzeug (2)
- Entwicklung (2)
- Error (2)
- Fahrerinformation (2)
- Fahrstabilität (2)
- Fahrzeugführung (2)
- Fahrzeugsitz (2)
- Fehler (2)
- Fire (2)
- Front (2)
- Halswirbel (2)
- Highway design (2)
- Human body (2)
- Impact sled (2)
- Intelligent transport system (2)
- International (2)
- Klassifizierung (2)
- Klimawandel (2)
- Landstraße (2)
- Load (2)
- Luftverunreinigung (2)
- Mathematical model (2)
- Medical aspects (2)
- Medizinische Gesichtspunkte (2)
- Menschlicher Körper (2)
- Method (2)
- Motorcycle (2)
- Motorrad (2)
- Norm (tech) (2)
- On the spot accident investigation (2)
- Rechenmodell (2)
- Road network (2)
- Rural road (2)
- Safety belt (2)
- Seat (veh) (2)
- Severity (acid (2)
- Sicherheitsgurt (2)
- Soil (2)
- Specification (standard) (2)
- Spinal column (2)
- Straßenentwurf (2)
- Straßennetz (2)
- Straßenverkehrsrecht (2)
- Surfacing (2)
- Technologie (2)
- Technology (2)
- Traffic regulations (2)
- USA (2)
- Unterleib (2)
- Untersuchung am Unfallort (2)
- Vehicle handling (2)
- Wirbelsäule (2)
- Wirtschaftlichkeitsrechnung (2)
- (menschl) (1)
- Abfluss (1)
- Absorption (1)
- Accident rate (1)
- Active safety (1)
- Adult (1)
- Aged people (1)
- Air bag (restraint system) (1)
- Air quality management (1)
- Air transport (1)
- Aktive Sicherheit (1)
- Angle (1)
- Anthropmetric dummy (1)
- Antiblockiereinrichtung (1)
- Antiblockiersystem (1)
- Apparatus (measuring) (1)
- Arzneimittel (1)
- Asphaltstraße (Oberbau) (1)
- Auffahrunfall (1)
- Ausrüstung (1)
- Bau (1)
- Bearing capacity (1)
- Bein (1)
- Bicyclist (1)
- Brand (1)
- Bridge (1)
- Bridge management system (1)
- Brücke (1)
- Brücken Management System (1)
- Cadaver (1)
- Calibration (1)
- Camera (1)
- Carriageway (1)
- Cause (1)
- Chassis (1)
- Clay (1)
- Communication (1)
- Condition survey (1)
- Construction (1)
- Correlation (1)
- Crashtest (1)
- Critical path method (1)
- Damage (1)
- Data base (1)
- Data processing (1)
- Datenverarbeitung (1)
- Decision process (1)
- Decke (Straße) (1)
- Decke [Straße] (1)
- Deicing (1)
- Delivery vehicle (1)
- Demand (econ) (1)
- Demografie (1)
- Demography (1)
- Deterioration (1)
- Diagnostik (1)
- Diffusion (1)
- Digitale Bildverarbeitung (1)
- Dispersion (stat) (1)
- Driving aptitude (1)
- Droge (1)
- Drugs (1)
- Drunkenness (1)
- EU (1)
- Earthworks (1)
- Echtzeit (1)
- Education (1)
- Efficiency (1)
- Eichung (1)
- Electronic stability program (1)
- Elektronisches Stabilitätsprogramm (1)
- Emergency (1)
- Empfindlichkeit (1)
- Enteisung (1)
- Entscheidungsprozess (1)
- Environment (1)
- Environment protection (1)
- Equipment (1)
- Erdarbeiten (1)
- Erste Hilfe (1)
- Erwachsener (1)
- Erziehung (1)
- Evaluation (Assessment) (1)
- Expert system (1)
- Expertensystem (1)
- Fahrassistenzsystem (1)
- Fahrbahn (1)
- Fahrleistung (1)
- Fahrstreifen (1)
- Fahrtauglichkeit (1)
- Fahrwerk (1)
- Fein (mater) (1)
- Feinstaub (1)
- Fernverkehrsstrasse (1)
- Feuer (1)
- Fine (mater) (1)
- Finite element method (1)
- First aid (1)
- Flexible pavement (1)
- Flooding (1)
- Foot (not a measure) (1)
- Frau (1)
- Fugenfüllung (1)
- Fuß (1)
- Fußgängerbereich (1)
- Geomembran (1)
- Geomembrane (1)
- Geschwindigkeit (1)
- Gewicht (1)
- Greenhouse effect (1)
- Griffigkeit (1)
- Ground water (1)
- Grundwasser (1)
- Haftung (jur) (1)
- Head (human) (1)
- Heavy metal (1)
- Height (1)
- Höhe (1)
- Hüfte (menschl) (1)
- Image processing (1)
- Impact study (1)
- Incident detection (1)
- Incident management (1)
- Information (1)
- Intelligentes Transportsystem (1)
- Intelligentes Verkehrssystem (1)
- Interface (1)
- Intersection (1)
- Interview (1)
- Jahreszeit (1)
- Kamera (1)
- Kleintransporter (1)
- Knie (1)
- Knotenpunkt (1)
- Kommunikation (1)
- Kopf (menschl) (1)
- Korn (1)
- Kornverteilung (1)
- Korrelation(Math (1)
- Kraftfahrzeug (1)
- Layer (1)
- Learning (1)
- Lebenszyklus (1)
- Leichnam (1)
- Leistungsfähigkeit (allg) (1)
- Lernen (1)
- Level of service (1)
- Liability (1)
- Luftreinhaltung (1)
- Lufttransport (1)
- Main road (1)
- Market (1)
- Markt (1)
- Materialveraenderung (allg) (1)
- Medical examination (1)
- Medication (1)
- Medizinische Untersuchung (1)
- Merging (1)
- Messgerät (1)
- Mesurement (1)
- Methode der finiten Elemente (1)
- Motorisierungsgrad (1)
- Nachfrage (1)
- Network (traffic) (1)
- Netzplantechnik (1)
- Neural network (1)
- Neuronales Netz (1)
- Nitric acid (1)
- Non destructive testing (1)
- Notfall (1)
- Oberfläche (1)
- Overlapping (1)
- PVC (1)
- Particle (1)
- Particle size distribution (1)
- Particulate matter (1)
- Peat (1)
- Pedestrian precinct (1)
- Pelvis (1)
- Pfahl (1)
- Pile (1)
- Planning (1)
- Planung (1)
- Policy (1)
- Politik (1)
- Pollutant (1)
- Polyvinylchloride (1)
- Preloading (soil) (1)
- Prevention (1)
- Probability (1)
- Prototyp (1)
- Prototype (1)
- Prüefverfahren (1)
- Public transport (1)
- Rain (1)
- Real-time (1)
- Rear end collision (1)
- Reconstruction (accid) (1)
- Regen (1)
- Regional planning (1)
- Regionalplanung (1)
- Richtlinien (1)
- Risiko (1)
- Risikoverhalten (1)
- Risk (1)
- Risk taking (1)
- Road (1)
- Road user (1)
- Robot (1)
- Roboter (1)
- Run off (1)
- Sachschaden (1)
- Safety fence (1)
- Salpetersäure (1)
- Schadstoff (1)
- Schicht (1)
- Schnittstelle (1)
- Schutz (1)
- Schutzeinrichtung (1)
- Schwermetall (1)
- Sealing compound (1)
- Season (1)
- Seite (1)
- Sensitivity (1)
- Sensor (1)
- Service life (1)
- Settlement (1)
- Setzung (1)
- Side (1)
- Skidding resistance (1)
- Social factors (1)
- Soziale Faktoren (1)
- Spain (1)
- Spanien (1)
- Specifications (1)
- Speed (1)
- Stadtplanung (1)
- Stand der Technik (Bericht) (1)
- Standardabweichung (1)
- Stat) (1)
- State of the art report (1)
- Straße (1)
- Stress (psychol) (1)
- Störfallentdeckung (1)
- Störfallmanagement (1)
- Subsoil (1)
- Surface (1)
- Technische Vorschriften (Kraftfahrzeug) (1)
- Test procedure (1)
- Ton (Gestein) (1)
- Torf (1)
- Town planning (1)
- Traffic (1)
- Traffic lane (1)
- Traffic restraint (1)
- Tragfähigkeit (1)
- Transport mode (1)
- Treibhauseffekt (1)
- Trunkenheit (1)
- Umwelt (1)
- Umweltschutz (1)
- Unfallhäufigkeit (1)
- Unfallrekonstruktion (1)
- United Kindom (1)
- Untergrund (1)
- Ursache (1)
- Vehicle mile (1)
- Vehicle ownership (1)
- Vehicle regulations (1)
- Vereinigtes Königreich (1)
- Verfahren (1)
- Verfahren ; Verkehrsinfrastruktur (1)
- Verhütung (1)
- Verkehr (1)
- Verkehrsbeschränkung (1)
- Verkehrsmittel (1)
- Verkehrsnetz (1)
- Verkehrsqualität (1)
- Verkehrsteilnehmer (1)
- Verkehrsverflechtung (1)
- Virtual reality (1)
- Virtuelle Realität (1)
- Vorbelastung (Boden) (1)
- Vorn (1)
- Vorne (1)
- Wahrscheinlichkeit (1)
- Weather (1)
- Weight (1)
- Windschutzscheibe (1)
- Windscreen (veh) (1)
- Winkel (1)
- Wirkungsanalyse (1)
- Witterung (1)
- Woman (1)
- Zerstörungsfreie Prüfung (1)
- Zusammenstoss (1)
- Zustandsbewertung (1)
- Öffentlicher Verkehr (1)
- Überdeckung (1)
- Überschwemmung (1)
The first stage of the work has been to collate information on bridge assessment from the participating countries. In the later stages, the aim is to provide guidelines that reflect the current best practices, a methodology that will allow for future development and sufficient flexibility to accommodate variations in national priorities as the process of harmonisation is pursued. The following tasks fall within the scope of the project: (1) a review of current procedures and standards used for bridge assessment in Europe; (2) the development of models for taking into account the bridge specific traffic conditions and material properties; (3) the use of reliability methods based on a probabilistic approach for bridge assessment including the use of measurements for updating the reliability of structural elements; and (4) the provision of recommendations for methods and procedures that can be adopted for the assessment module of the management framework highlighting where further development will be beneficial.
In the EC FP6 Integrated Project Advanced Protection Systems, APROSYS, the first WorldSID small female prototype was developed and evaluated by BASt, FTSS, INRETS, TRL and UPM-INSIA during 2006 and 2007. Results were presented at the ESV 2007 conference (Been et al., 2007). With the prototype dummy scoring a biofidelity rating higher than 6.7 out of 10 according to ISO/TR9790, the results were very promising. Also opportunities for further development were identified by the evaluation group. A revised prototype, Revision1, was subsequently developed in the 2007-2008 period to address comments from the evaluation group. The Revision1 dummy includes changes in the half arms and the suit (anthropometry and arm biomechanics), the thorax and abdomen ribs and sternum (rib durability), the abdomen/lumbar area and the lower legs (mass distribution). Also a two-dimensional chest deflection measurement system was developed to measure deflection in both lateral and anterior-posterior direction to improve oblique thorax loading sensitivity. Two Revision1 prototype dummies have now been evaluated by FTSS, TRL, UPM-INSIA and BASt. The updated prototype dummies were subjected to an extensive matrix of biomechanical tests, such as full body pendulum tests and lateral sled impact tests as specified by Wayne State University, Heidelberg University and Medical College of Wisconsin. The results indicated a significant improvement of dummy biofidelity. The overall dummy biofidelity in the ISO rating system has significantly improved from 6.7 to 7.6 on a scale between 0-10. The small female WorldSID has now obtained the same biofidelity rating as the WorldSID mid size male dummy. Also repeatability improved with respect to the prototype. In conclusion the recommended updates were all executed and all successfully contributed in achieving improved performance of the dummy.
The frontal crash is still an important contributor to deaths and serious injured resulting from road accidents in Europe. As the Hybrid-III dummy used in crash tests is over two decades old, the European Enhanced Vehicle-safety Committee is studying the potential for a new test device. Key is the availability of a well-defined set of requirements that identifies the minimum level of biofidelity required for an advanced frontal dummy. In this paper, a complete set of frontal impact biofidelity requirements, consisting of references , description of test conditions and corridors, is presented.
This study aimed to better understand nitrate transport in the soil system in a part of the state of North Rhine-Westphalia, in Germany, and to aid in the development of groundwater protection plans. An advection-diffusion (AD) cell was used in a miscible displacement experiment setup to characterize nitrate transport in 12 different soil samples from the study area. The three nitrate sorption isotherms were tested to define the exact nitrate interaction with the soil matrix. Soils varied in their properties which in its turn explain the variations in nitrate transport rates. Soil texture and organic matter content showed to have the most important effect on nitrate recovery and retardation. The miscible displacement experiment indicated a decrease in retardation by increasing sand fraction, and an increase in retardation by increasing soil organic matter content. Soil samples with high sand fractions (up to 94 %) exhibited low nitrate sorption capacity of less than 10 %, while soils with high organic matter content showed higher sorption of about 30 %. Based on parameterization for nitrate transport equation, the pore water velocity for both sandy and loamy soils were significantly different (P < 0.001). Pore water velocity in sandy soil (about 4 x 10 high 3 m/s) was about 100 to 1000 larger than in loamy soils (8.7 x 10 high 5 m/s). On the other hand, the reduction in nitrate transport in soils associated with high organic matter was due to fine pore pathways clogged by fine organic colloids. It is expected that the existing micro-phobicity increased the nitrate recovery from 9 to 32 % resulting in maximum diffusion rates of about 3.5 x 10 high 5 m/s2 in sandy soils (sample number CS-04) and about 1.4 x 10 high 7 m/s2 in silt loam soils (sample number FS-02).
The European Enhanced Vehicle-safety Committee wants to promote the use of more biofidelic child dummies and biomechanical based tolerance limits in regulatory and consumer testing. This study has investigated the feasibility and potential impact of Q-dummies and new injury criteria for child restraint system assessment in frontal impact. European accident statistics have been reviewed for all ECE-R44 CRS groups. For frontal impact, injury measures are recommended for the head, neck, chest and abdomen. Priority of body segment protection depends on the ECE-R44 group. The Q-dummy family is able to reflect these injuries, because of its biofidelity performance and measurement capabilities for these body segments. Currently, the Q0, Q1, Q1.5, Q3 and Q6 are available representing children of 0, 1, 1.5, 3 and 6 years old. These Q-dummies cover almost all dummy weight groups as defined in ECE-R44. Q10, representing a 10 year-old child, is under development. New child dummy injury criteria are under discussion in EEVC WG12. Therefore, the ECE-R44 criteria are assessed by comparing the existing P-dummies and new Q-dummies in ECE-R44 frontal impact sled tests. In total 300 tests covering 30 CRSs of almost all existing child seat categories are performed by 11 European organizations. From this benchmark study, it is concluded that the performance of the Q-dummy family is good with respect to repeatability of the measurement signals and the durability of the dummies. Applying ECE-R44 criteria, the first impression is that results for P- and Q-dummy are similar. For child seat evaluation the potential merits of the Q-dummy family lie in the extra measurement possibilities of these dummies and in the more biofidelic response.
APT with the mobile load simulator MLS10 towards non-destructive pavement structural analysis
(2019)
In 2014 a research program has been started about non-destructive test methods to evaluate the structure of pavements. This task has been given to two research groups - first research group is led by RWTH Aachen University (Rheinisch-Westfälische Technische Hochschule) and the second by University of Siegen. This paper focuses on the initial findings of the running research program. The assessment of the existing infrastructure and its condition will be one of the main tasks during the next years in order to use the available budget for maintenance accurately and efficiently. Therefore, it is necessary to identify possible damages and examine their effects on the road construction. BASt (Federal Highway Research Institute) is using the Mobile Load Simulator MLS10 for accelerated pavement testing (APT) on different types of pavements. In addition to non-destructive test methods, sensors are applied to measure structural impacts. The overall objective of this research program is to develop a non-destructive test method that allows the calculation of the remaining life time and load cycles of pavements. To simulate realistic wheel loads in a short period of time the MLS10 on German full scale standard pavement constructions has been used. The first pavement test section was loaded with 3 x 10 high 6 50 kN wheel loads while the second, thinner pavement test section was loaded with 3 x 10 high 5 50 kN wheel loads. Both loads are equivalent to the pavement design load. Three different strategies have been used to analyze and monitor structural changes. The innovative measurements have been realized by the two research groups to collect data for their models. The RWTH Aachen collected data with twelve geophones aligned in a row parallel to the wheel path. The geophones measure the entire vertical deflection basin of the pavement surface that exists due to the passing real truck wheels. These measurements were done for different truck speeds and at different transverse distances to the wheel path. The University of Siegen collected data by using acceleration sensors on the surface of the road construction. After recording the data they were integrated into displacement signals and evaluated. Additionally to those measurements BASt used conventional equipment to monitor the pavement structure and surface characteristics. The measurements and evaluation tools used for the innovation program have a high potential to validate APT programs in the future. Based on this research it is possible to start further research activities to push the non-destructive evaluation of pavements structures - not only in APT - into an improved direction.
In the last years there has been a decline in accident figures in Germany especially for four wheeled vehicles. At the same time, accident figures for motorcycles remained nearly constant. About 17 % of road traffic fatalities in the year 2006 were motorcyclists. 33 % of these riders were killed in single vehicle crashes. This leads to the conclusion that improving driving dynamics and driving stability of powered two wheelers would yield considerable safety gains. However, the well-known measures for cars and trucks with their proven effectiveness cannot be transferred easily to motorcycles. Therefore studies were carried out to examine the safety potential of Anti Lock Braking Systems (ABS) and Vehicle Stability Control (VSC) for motorcycles by means of accident analysis, driving tests and economical as well as technical assessment of the systems. With regard to ABS, test persons were assigned braking tasks (straight and in-curve) with five different brake systems with and without ABS. Stopping distances as well as stress and strain on the riders were measured for 9 test riders who completed 105 braking manoeuvres each. Knowing the ability of ABS to avoid falls during braking in advance of a crash and taking into account the system costs, a cost benefit analysis for ABS for motorcycles was carried out for different market penetration of ABS, i.e. equipment rates, and different time horizons. The potential of VSC for motorcycles was estimated in two steps. First the kinds of accidents that could be prevented by such a system at all have been analysed. For these accident configurations, simulations and driving tests were then performed to determine if a VSC was able to detect the critical driving situation and if it was technically possible to implement an actuator which would help to stabilise the critical situation.
In general the passive safety capability is much greater in newer versus older cars due to the stiff compartment preventing intrusion in severe collisions. However, the stiffer structure which increases the deceleration can lead to a change in injury patterns. In order to analyse possible injury mechanisms for thoracic and lumbar spine injuries, data from the German Inâ€Depth Accident Study (GIDAS) were used in this study. A twoâ€step approach of statistical and caseâ€byâ€case analysis was applied for this investigation. In total 4,289 collisions were selected involving 8,844 vehicles, 5,765 injured persons and 9,468 coded injuries. Thoracic and lumbar spine injuries such as burst, compression or dislocation fractures as well as soft tissue injuries were found to occur in frontal impacts even without intrusion to the passenger compartment. If a MAIS 2+ injury occurred, in 15% of the cases a thoracic and/or lumbar spine injury is included. Considering AIS 2+ thoracic and lumbar spine, most injuries were fractures and occurred in the lumbar spine area. From the case by case analyses it can be concluded that lumbar spine fractures occur in accidents without the engagement of longitudinals, lateral loading to the occupant and/or very severe accidents with MAIS being much higher than the spine AIS.
An approach to the standardization of accident and injury registration systems (STAIRS) in Europe
(1998)
STAIRS is a European Commission funded study whose aim is to produce a set of guidelines for a harmonised, crash injury database. The need to evaluate the effectiveness of the forthcoming European Union front and side impact directives has emphasised the need for real world crash injury data-sets that can be representative of the crash population throughout Europe. STAIRS will provide a methodology to achieve this. The ultimate aim of STAIRS is to produce a set of data collection tools which will aid decision making on vehicle crashworthiness as well as providing a means to evaluate the effectiveness of safety regulations. This paper will disseminate the up-to-date findings of the group as they try to harmonise their methods. The stage has been reached where studies into the diverse methods of the UK, French and German systems of crash injury investigation have been undertaken. An assessment has already been made of the relationships between the three current systems in order to define the areas of agreement and divergence. The conclusions reached stated that there were many areas that are already closely related and that the differences were only at the detailed level. With the emphasis on secondary safety and injury causation, core data sets were decided upon, taking into account: vehicle description, collision configuration, structural response of vehicles, restraint and airbag performance, child restraint performance, Euro NCAP, pedestrian and vehicle occupant kinematics, injury description and causation. Each variable was studied objectively, the important elements isolated and developed into a form that all partners were agreeable on. A glossary of terms is being developed as the project progresses which includes ISO standards and other definitions from the associated CAREPLUS project, which addresses the comparability of national data sets. A major consideration of the group was the data collection method to be employed. The strengths and weaknesses of each study were investigated to obtain a clear idea of which aspects offered the best way forward. The quality of this information and transference into a common format, as well as the necessary error checking systems to be employed have just been completed and are described. In tandem with this area of study the problem of the statistical relationship of each sample to the national population is also being investigated. The study proposes a mechanism to use a sample of crash injury data to represent the national and international crash injury problem
Advancing active safety towards the protection of vulnerable road users: the PROSPECT project
(2017)
Accidents involving Vulnerable Road Users (VRU) are still a very significant issue for road safety. According to the World Health Organisation, pedestrian and cyclist deaths account for more than 25% of all road traffic deaths worldwide. Autonomous Emergency Braking Systems have the potential to improve safety for these VRU groups. The PROSPECT project (Proactive Safety for Pedestrians and Cyclists) aims to significantly improve the effectiveness of active VRU safety systems compared to those currently on the market by expanding the scope of scenarios addressed by the systems and improving the overall system performance. The project pursues an integrated approach: Newest available accident data combined with naturalistic observations and HMI guidelines represent key inputs for the system specifications, which form the basis for the system development. For system development, two main aspects are considered: advanced sensor processing with situation analysis, and intervention strategies including braking and steering. All these concepts are implemented in several vehicle prototypes. Special emphasis is put on balancing system performance in critical scenarios and avoiding undesired system activations. For system validation, testing in realistic scenarios will be done. Results will allow the performance assessment of the developed concepts and a cost-benefit analysis. The findings within the PROSPECT project will contribute to the generation of state -of-the-art knowledge, technical innovations, assessment methodologies and tools for advancing Advanced Driver Assistance Systems towards the protection of VRUs. The introduction of a new generation safety system in the market will enhance VRU road safety in 2020-2025, contributing to the "Vision Zero" objective of no fatalities or serious injuries in road traffic set out in the Transport White Paper. Furthermore, the test methodologies and tools developed within the project shall be considered for the New Car Assessment Programme (Euro NCAP) future roadmaps, supporting the European Commission goal of halving the road toll in the 2011-2020 timeframe.
The road transport infrastructure is facing many challenges and the subsequent adaptation of the infrastructure is of utmost concern. These challenges are as follows: globalization, sustainability, technological and demographic change, an increase in goods transport and climate change. Various climate projections predict changing climatic parameters such as temperature, precipitation and wind speed for Germany. This could have severe impacts on road transport infrastructure as well as road traffic itself. At the Federal Highway Research Institute (Bundesanstalt für Straßenwesen), a strategy was developed to adapt roads and engineering structures to the impacts of climate change. The strategy "Anpassung der Straßenverkehrsinfrastruktur an den Klimawandel /Adaptation of road traffic infrastructure to climate change (AdSVIS)" currently comprises about 15 projects. Adaptation measures are to be developed for the identified risk areas and consequently their effectiveness has to be assessed.
As bearing capacity measurements become more and more important, the necessity of assuring quality by establishing a QA system becomes more relevant. Within this context, the FGSV recommends the introduction of comparative measurements. Since 2015, two pilot events took place, with the main aim of introducing repetitive comparative measurements, in which all FWD operators shall participate. The results of the comparative measurements show that the basic principles behind comparative measurements (of the FWD), elaborated as a Europe-wide consensus and put into practice in the Netherlands and the United Kingdom, are valid, but still there is a variety of questions to be answered concerning certain details of the measuring system itself, e. g. measurement of the temperatures (air, pavement) and the impact of load introduction. All in all, the two pilot events in 2015 and 2016 proved that the comparability of the different FWD measuring devices is satisfactory.
One main objective of the EU-Project SENIORS is to provide improved methods to assess thoracic injury risk to elderly occupants. In contribution to this task paired simulations with a THOR dummy model and human body model will be used to develop improved thoracic injury risk functions. The simulation results can provide data for injury criteria development in chest loading conditions that are underrepresented in PMHS test data sets that currently proposed risk functions are based on. To support this approach a new simplified generic but representative sled test fixture and CAE model for testing and simulation were developed. The parameter definition and evaluation of this sled test fixture and model is presented in this paper. The justification and definition of requirements for this test set-up was based on experience from earlier studies. Simple test fixtures like the gold standard sled fixture are easy to build and also to model in CAE, but provide too severe belt-only loading. On the other hand a vehicle buck including production components like airbag and seat is more representative, but difficult to model and to be replicated at a different laboratory. Furthermore some components might not be available for physical tests at later stage. The basis of the SENIORS generic sled test set-up is the gold standard fixture with a cable seat back and foot rest. No knee restraint was used. The seat pan design was modified including a seat ramp. The three-point belt system had a generic adjustable load limiter. A pre-inflated driver airbag assembly was developed for the test fixture. Results of THOR test and simulations in different configurations will be presented. The configurations include different deceleration pulses. Further parameter variations are related to the restraint system including belt geometry and load limiter levels. Additionally different settings of the generic airbag were evaluated. The test set-up was evaluated and optimized in tests with the THOR-M dummy in different test configurations. Belt restraint parameters like D-ring position and load limiter setting were modified to provide moderate chest loading to the occupant. This resulted in dummy readings more representative of the loading in a contemporary vehicle than most available PMHS sled tests reported in the literature. However, to achieve a loading configuration that exposes the occupant to even less severe loading comparable to modern vehicle restraints it might be necessary to further modify the test set-up. The new generic sled test set-up and a corresponding CAE model were developed and applied in tests and simulations with THOR. Within the SENIORS project with this test set-up also volunteer and PMHS as well as HBM simulations are performed, which will be reported in other publications. The test environment can contribute in future studies to the assessment of existing and new frontal impact dummies as well as dummy improvements and related instrumentation. The test set-up and model could also serve as a new standard test environment for PMHS and volunteer tests as well as HBM simulations.
In 2012 the fifth ESAR conference (Expert Symposium on Accident Research) was held in Hannover. ESAR is an international convention of experts, who analyze traffic accidents all over the world and discuss their results in this context, conducted at the Medizinische Hochschule Hannover every 2 years. It connected representatives of public authorities, engineers in automotive development and scientists and offers a forum with particular emphasis on In-Depth-Analyses of accident statistics and accident analyses. Special focus is placed on research on the basis of so-called "In-Depth-Accident-Investigations" [data collections at the sites of the accidents], which are characterized by extensive documentations of the sites of the accidents, of the vehicles as well as of the injuries, encompassing several scientific fields. ESAR aims at a multi-disciplinary compilation of scientific results and at discussing them on an international, scientific level. It is thus a scientific colloquium and a platform for exchanging information for all accident researchers. Experiences in accident prevention as well as in the complex field of accident reconstruction are stated and new research fields are added. Existing results of long-term research work in Europe, the US, Australia and Japan include different infrastructural correlations and give findings on population, vehicle population and driver characteristics, which offer a basis for recommendations to be derived and measures for increasing road safety.