Abteilung Fahrzeugtechnik
The objective was to develop and validate a crash trolley (reference vehicle) equipped with a compartment and a full restraint system for driver and front seat passenger which can be used in full scale crash testing. Furthermore, the crash trolley should have a suspension to show rotation and nick effects similar to real vehicles. Within the development phase the reference vehicle was build based on a European family car. Special attention was needed to provide appropriate strength to the trolley and its suspension. The reference vehicle is equipped with a restraint system consisting of airbags, pedals, seats, dashboard, and windscreen. On the front of the vehicle different crash barriers can be installed to provide miscellaneous deceleration pulses. For the validation phase a series of low and high speed crash tests with HIII dummies were conducted and compared with full scale tests. For the comparison deceleration pulse, dummy numbers and vehicle movement were analyzed. Validation tests with velocities up to 60 km/h showed promising results. The compartment and the suspension systems stayed stable. Rotation effects were comparable with full scale car crash tests. The airbags and seat belt system worked reasonable. The acceleration pulse compared to an Euro NCAP test had a similar characteristic but was in general slightly lower. After the successful validation the reference vehicle is already in use in different studies in the field of vehicle safety research at BASt.
The goal of the project FIMCAR (Frontal Impact and Compatibility Assessment Research) was to define an integrated set of test procedures and associated metrics to assess a vehicle's frontal impact protection, which includes self- and partner-protection. For the development of the set, two different full-width tests (full-width deformable barrier [FWDB] test, full-width rigid barrier test) and three different offset tests (offset deformable barrier [ODB] test, progressive deformable barrier [PDB] test, moveable deformable barrier with the PDB barrier face [MPDB] test) have been investigated. Different compatibility assessment procedures were analysed and metrics for assessing structural interaction (structural alignment, vertical and horizontal load spreading) as well as several promising metrics for the PDB/MPDB barrier were developed. The final assessment approach consists of a combination of the most suitable full-width and offset tests. For the full-width test (FWDB), a metric was developed to address structural alignment based on load cell wall information in the first 40 ms of the test. For the offset test (ODB), the existing ECE R94 was chosen. Within the paper, an overview of the final assessment approach for the frontal impact test procedures and their development is given.
For the assessment of vehicle safety in frontal collisions compatibility (which consists of self and partner protection) between opponents is crucial. Although compatibility has been analysed worldwide for over 10 years, no final assessment approach has been defined to date. Taking into account the European Enhanced Vehicle safety Committee (EEVC) compatibility and frontal impact working group (WG15) and the FP5 VC-COMPAT project activities, two test approaches have been identified as the most promising candidates for the assessment of compatibility. Both are composed of an off-set and a full overlap test procedure. In addition another procedure (a test with a moving deformable barrier) is getting more attention in current research programmes. The overall objective of the FIMCAR project is to complete the development of the candidate test procedures and propose a set of test procedures suitable for regulatory application to assess and control a vehicle- frontal impact and compatibility crash safety. In addition an associated cost benefit analysis should be performed. The objectives of the work reported in this deliverable were to review existing full-width test procedures and their discussed compatibility metrics, to report recent activities and findings with respect to full-width assessment procedures and to assess test procedures and metrics. Starting with a review of previous work, candidate metrics and associated performance limits to assess a vehicle- structural interaction potential, in particular its structural alignment, have been developed for both the Full Width Deformable Barrier (FWDB) and Full Width Rigid Barrier (FWRB) tests. Initial work was performed to develop a concept to assess a vehicle- frontal force matching. However, based on the accident analyses performed within FIMCAR frontal force matching was not evaluated as a first priority and thus in line with FIMCAR strategy the focus was put on the development of metrics for the assessment of structural interaction which was evaluated as a first priority.
For the assessment of vehicle safety in frontal collisions compatibility (which consists of self and partner protection) between opponents is crucial. Although compatibility has been analysed worldwide for over 10 years, no final assessment approach has been defined to date. Taking into account the European Enhanced Vehicle safety Committee (EEVC) compatibility and the final report to the steering committee on frontal impact [Faerber 2007] and the FP5 VC-COMPAT[Edwards 2007] project activities, two test approaches were identified as the most promising candidates for the assessment of compatibility. Both are composed of an off-set and a full overlap test procedure. In addition another procedure (a test with a moving deformable barrier) is getting more attention in current research programmes. The overall objective of the FIMCAR project is to complete the development of the candidate test procedures and propose a set of test procedures suitable for regulatory application to assess and control a vehicle- frontal impact and compatibility crash safety. In addition an associated cost benefit analysis will be performed. In the FIMCAR Deliverable D 3.1 [Adolph 2013] the development and assessment of criteria and associated performance limits for the full width test procedure were reported. In this Deliverable D3.2 analyses of the test data (full width tests, car-to-car tests and component tests), further development and validation of the full width assessment protocol and development of the load cell and load cell wall specification are reported. The FIMCAR full-width assessment procedure consists of a 50 km/h test against the Full Width Deformable Barrier (FWDB). The Load Cell Wall behind the deformable element assesses whether or not important Energy Absorbing Structures are within the Common Interaction Zone as defined based on the US part 581 zone. The metric evaluates the row forces and requires that the forces directly above and below the centre line of the Common Interaction Zone exceed a minimum threshold. Analysis of the load spreading showed that metrics that rely on sum forces of rows and columns are within acceptable tolerances. Furthermore it was concluded that the Repeatability and Reproducibility of the FWDB test is acceptable. The FWDB test was shown to be capable to detect lower load paths that are beneficial in car-to-car impacts.
Um die zukünftige Entwicklung von Fahrzeugen mit alternativem Antrieb, z.B. Hybrid-, Elektro- und Brennstoffzellenfahrzeuge, in Deutschland verfolgen und analysieren zu können, hatte die Bundesanstalt für Straßenwesen (BASt) im Jahr 2010 die Einrichtung einer langfristigen Beobachtung des Fahrzeugmarktes und einer konzentrierten Beobachtung des Unfallgeschehens initiiert, mit den Zielen, die tatsächliche Umsetzung des technologischen Fortschritts in marktgängige Produkte zu verfolgen, frühzeitig genaue Kenntnis über die sich der technologischen Entwicklung anschließenden tatsächlichen Marktentwicklung zu gewinnen, und mögliche Fehlentwicklungen - insbesondere mit Blick auf die Verkehrssicherheit zeitnah zu identifizieren. Auf Basis der bisherigen Marktentwicklung ist die Analyse des Unfallgeschehens naturgemäß noch wenig aussagekräftig. Die deutliche Zunahme der Unfallbeteiligung von Hybridfahrzeugen um 95% von 2007 bis 2010 wird durch einen Bestandsanstieg von 117% in diesem Zeitraum relativiert und deutet daher eher auf ein unterdurchschnittliches Risiko, wobei keine Informationen über die durchschnittliche Fahrleistung in die Interpretationen einbezogen werden können. Der relativ hohe Anteil von Innerortsunfällen ist vor allem vor dem Hintergrund der Nutzung der Fahrzeuge zu interpretieren.
In den vergangenen 20 Jahren hat der Verkehrslärm an Autobahnen um durchschnittlich 2,5 dB(A), an Bundesstraßen um 1,5 dB(A) zugenommen. Die Absenkung der Geräuschgrenzwerte durch technische Maßnahmen an den Fahrzeugantrieben brachte nicht den gewünschten Erfolg, da außerorts das Reifen-Fahrbahn-Geräusch überwiegt und die Verkehrsmenge generell stark gewachsen ist. Eine Stagnation des Verkehrsaufkommens ist nicht erkennbar, sodass auch in Zukunft neue Straßen in der dicht besiedelten Bundesrepublik nur noch zusammen mit sehr kostenintensiven Lärmschutzmaßnahmen geplant und gebaut werden können. Mit dieser Ausgangslage wurde, als Teil des Forschungsnetzwerkes "Leiser Verkehr", das Verbundprojekt "Reduzierte Reifen-Fahrbahn-Geräusche" konzipiert. In dem Projekt arbeiten 16 Partner aus Verwaltung, Industrie und Forschung zusammen, um zum einen die theoretischen Grundlagen bei der Entstehung und Messung von Reifen-Fahrbahn-Geräuschen zu erarbeiten, zum anderen die Komponenten des Systems "Reifen-Fahrbahn" zu optimieren. Dieses System setzt sich aus den Teilen Reifen, Fahrzeug, Straße (Asphalt-, Betonbauweise) und den Fahrbahnübergängen der Brücken zusammen. Im Rahmen der Projektlaufzeit sollen 1 bis 3 dB(A) leisere Komponenten des geräuscherzeugenden Gesamtsystems entwickelt, erprobt und gebaut werden. Mittelfristig soll durch die Entwicklung von Reifen-Fahrbahn-Geräusch-Modellen ein mindestens 5 dB(A) leiseres Gesamtsystern konzipiert werden. Nach Beginn im Sommer 2001 befindet sich das Projekt momentan in der Arbeitsphase und mit ersten Ergebnissen ist Ende des laufenden Jahres zu rechnen.
Abschluss des deutsch-französischen Verbundprojekts "Inter-Vehicle Hazard Warning" (DEUFRAKO-IVWH)
(2004)
Im Rahmen der Deutsch-Französischen Kooperation im Verbundprojekt "Inter-Vehicle Hazard Warning" (DEUFRAKO-IVWH) wurde ein auf Fahrzeug-Fahrzeug-Kommunikation basierendes Warnsystem konzipiert und bewertet. Die im Rahmen des Projekts durchgeführten Arbeiten haben gezeigt, dass ein auf Fahrzeug-Fahrzeug-Kommunikation basierendes Warnsystem prinzipiell geeignet ist, einen Beitrag zur Erhöhung der Verkehrssicherheit zu leisten. Das Ausmaß der zu erwartenden positiven Effekte ist allerdings ganz wesentlich abhängig vom Ausstattungsgrad der Fahrzeugflotte mit einem solchen System.
Die amtliche Straßenverkehrsunfallstatistik kann nur in begrenztem Umfang Informationen zu Unfallentstehung, Unfallablauf sowie zu den zugrunde liegenden Verletzungsmechanismen bereitstellen. Verbleibende Informationslücken lassen sich durch spezielle Erhebungsteams schließen, die Verkehrsunfälle nach wissenschaftlichen Aspekten dokumentieren. Hierzu unterhalten das Bundesministerium für Verkehr, Bau- und Wohnungswesen und die Bundesanstalt für Straßenwesen seit 30 Jahren ein Forschungsprojekt zur Unfalldatenerhebung an der Medizinischen Hochschule Hannover. Seit 1999 erfolgt eine Kooperation mit der Forschungsvereinigung Automobiltechnik (FAT), die ein weiteres Erhebungsteam an der Technischen Universität Dresden unterhält. Die Unfalldaten gehen in die gemeinsame GIDAS-Datenbank ein, aus der sich umfassende Informationen zu den breit gefächerten Forschungsfeldern "Passive und aktive Fahrzeugsicherheit", "Verkehrs- und Rettungsmedizin" und "Straßenbezogene Sicherheitsfragen" gewinnen lassen. In der Zukunft werden Unfallvermeidungsstrategien und Unfallursachenprophylaxe im Vordergrund einer prospektiven Unfallforschung stehen. Die Daten werden auch in Zukunft für die weitere Verbesserung der Verkehrssicherheit einen bedeutenden Beitrag leisten.
Zur Unterstützung von Forschungsvorhaben auf dem Gebiet der Belastung und Beanspruchung von Kraftfahrern hat die Bundesanstalt für Straßenwesen ein Versuchsfahrzeug, genannt Fahrerleistungsmessfahrzeug (FLMF), sowie die dazugehörigen Nebeneinrichtungen erstellen lassen. Mit diesem Fahrzeug wurde eine erste, psychologisch orientierte Erprobungsstudie im realen Straßenverkehr durchgeführt, um problemorientierte Erfahrungen sammeln zu können. Zur inhaltlichen Ausrichtung der Untersuchung wurde ein Modell über Bedingungen des Kraftfahrerverhaltens im Straßenverkehr entwickelt. In diesem Grundmodell werden situative und situationsübergreifende Komponenten unterschieden, die jeweils personen- und verkehrsbezogen ausgeprägt sein können. In der durchgeführten Untersuchung wird das Schwergewicht auf die Analyse der situationsübergreifenden personenbezogenen Bedingungen gelegt. Die unterschiedlichen situativen verkehrsbezogenen Bedingungen dienen hauptsächlich der Beschreibung der Anforderungen an den Kraftfahrer. Mit 27 Versuchspersonen wurden im Kölner Innenstadtbereich Versuchsfahrten durchgeführt. Die Fahrertätigkeit, wie z.B. Gas geben, Lenken, Bremsen wurden kontinuierlich automatisch erfasst. Zugleich konnten Befragungsergebnisse über Tasten elektronisch gespeichert werden. Auf wichtigen Versuchsabschnitten zeichnete eine Video-Anlage das Verkehrsgeschehen auf. In einer Serie von Vergleichen ausgewählter Situationen werden die situativen und situationsübergreifenden Einflüsse verdeutlicht. Die Ergebnisse zeigen bzw. bestätigen, dass im Innenstadtbereich der situative Einfluss auf das Kraftfahrerverhalten größer ist als der situationsübergreifende.
Although the number of road accident casualties in Europe (EU27) is falling the problem still remains substantial. In 2011 there were still over 30,000 road accident fatalities. Approximately half of these were car occupants and about 60 percent of these occurred in frontal impacts. The next stage to improve a car's safety performance in frontal impacts is to improve its compatibility. The objective of the FIMCAR FP7 EU-project was to develop an assessment approach suitable for regulatory application to control a car's frontal impact and compatibility crash performance and perform an associated cost benefit analysis for its implementation. This paper reports the cost benefit analyses performed to estimate the effect of the following potential changes to the frontal impact regulation: • Option 1 " No change and allow current measures to propagate throughout the vehicle fleet. • Option 2 " Add a full width test to the current offset Deformable Barrier (ODB) test. • Option 3 " Add a full width test and replace the current ODB test with a Progressive Deformable Barrier (PDB) test. For the analyses national data were used from Great Britain (STATS 19) and from Germany (German Federal Statistical Office). In addition in-depth real word crash data were used from CCIS (Great Britain) and GIDAS (Germany). To estimate the benefit a generalised linear model, an injury reduction model and a matched pairs modelling approach were applied. The benefits were estimated to be: for Option 1 "No change" about 2.0%; for Option 2 "FW test" ranging from 5 to 12% and for Option 3 "FW and PDB tests" 9 to 14% of car occupant killed and seriously injured casualties.