Abteilung Fahrzeugtechnik
Filtern
Erscheinungsjahr
Dokumenttyp
- Konferenzveröffentlichung (97)
- Buch (Monographie) (49)
- Wissenschaftlicher Artikel (45)
- Arbeitspapier (13)
- Teil eines Buches (Kapitel) (5)
Sprache
- Englisch (106)
- Deutsch (101)
- Mehrsprachig (2)
Schlagworte
- Safety (77)
- Sicherheit (76)
- Fahrzeug (57)
- Vehicle (57)
- Bewertung (51)
- Deutschland (46)
- Germany (46)
- Anfahrversuch (45)
- Evaluation (assessment) (45)
- Impact test (veh) (42)
- Versuch (42)
- Test (40)
- Test method (38)
- Prüfverfahren (37)
- Conference (34)
- Konferenz (34)
- Unfall (32)
- Accident (30)
- Fußgänger (30)
- Pedestrian (30)
- Driver assistance system (27)
- Fahrerassistenzsystem (27)
- Forschungsbericht (27)
- Verletzung (27)
- Injury (26)
- Car (25)
- Research report (25)
- Dummy (22)
- Simulation (22)
- Anthropometric dummy (21)
- Pkw (21)
- Collision (20)
- Frontalzusammenstoß (20)
- Messung (20)
- Head on collision (19)
- Measurement (19)
- Zusammenstoß (18)
- Driver (17)
- Driver information (17)
- Fahrer (17)
- Fahrerinformation (17)
- Fahrzeugführung (17)
- Gesetzgebung (17)
- Kompatibilität (17)
- Legislation (17)
- Method (17)
- Passives Sicherheitssystem (17)
- Verfahren (17)
- Compatibility (16)
- Head (16)
- Kopf (16)
- Passive safety system (16)
- Analyse (math) (15)
- Analysis (math) (15)
- Europa (15)
- Europe (15)
- Biomechanik (14)
- Driving (veh) (14)
- Shock (14)
- Unfallverhütung (14)
- Accident prevention (13)
- Biomechanics (13)
- Child (13)
- Development (13)
- Entwicklung (13)
- Improvement (13)
- Insasse (13)
- Kind (13)
- Radfahrer (13)
- Research project (13)
- Schlag (13)
- Schweregrad (Unfall, Verletzung) (13)
- Vehicle occupant (13)
- Verbesserung (13)
- injury) (13)
- Ausrüstung (12)
- Equipment (12)
- Forschungsarbeit (12)
- Lkw (12)
- Lorry (12)
- Motorrad (12)
- Severity (accid, injury) (12)
- Technische Vorschriften (Kraftfahrzeug) (12)
- Verletzung) (12)
- Wirtschaftlichkeitsrechnung (12)
- Automatic (11)
- Automatisch (11)
- Cost benefit analysis (11)
- Cyclist (11)
- Motorcycle (11)
- Perception (11)
- Prevention (11)
- Schweregrad (Unfall (11)
- Standardisierung (11)
- Vehicle regulations (11)
- Wahrnehmung (11)
- Active safety system (10)
- Aktives Sicherheitssystem (10)
- Behaviour (10)
- Communication (10)
- Elektronische Fahrhilfe (10)
- Kommunikation (10)
- Leistungsfähigkeit (allg) (10)
- Seitlicher Zusammenstoß (10)
- Severity (accid (10)
- Side impact (10)
- Statistik (10)
- Technologie (10)
- Technology (10)
- Verhalten (10)
- Autonomes Fahren (9)
- Autonomous driving (9)
- Belastung (9)
- Bemessung (9)
- Decrease (9)
- Design (overall design) (9)
- EU (9)
- Efficiency (9)
- Electronic driving aid (9)
- Ergonomics (9)
- Fahrstabilität (9)
- Geschwindigkeit (9)
- Load (9)
- Reifen (9)
- Speed (9)
- Tyre (9)
- Vehicle handling (9)
- Verminderung (9)
- Bremsung (8)
- Brustkorb (8)
- Error (8)
- Fahrzeuginnenraum (8)
- Fehler (8)
- Interior (veh) (8)
- Safety belt (8)
- Sicherheitsgurt (8)
- Standardization (8)
- Thorax (8)
- Traffic (8)
- Verhütung (8)
- Verkehr (8)
- Verkehrssteuerung (8)
- Braking (7)
- Knee (human) (7)
- Motorcyclist (7)
- Motorradfahrer (7)
- Prüfstand (7)
- Richtlinien (7)
- Risiko (7)
- Risk (7)
- Specifications (7)
- Statistics (7)
- Test rig (7)
- Traffic control (7)
- Aufprallschlitten (6)
- Collision avoidance system (6)
- Crash helmet (6)
- Datenbank (6)
- Deformation (6)
- Deformierbare Barriere (Anpralltest) (6)
- Emission (6)
- Ergonomie (6)
- Fatality (6)
- Fuel consumption (6)
- Gewicht (6)
- Impact sled (6)
- Impact test (6)
- Intelligent transport system (6)
- Kraftstoffverbrauch (6)
- Lenken (Fahrzeug) (6)
- Modification (6)
- Norm (tech) (6)
- Reaction (human) (6)
- Reaktionsverhalten (6)
- Schutzhelm (6)
- Specification (standard) (6)
- Steering (process) (6)
- Telematics (6)
- Telematik (6)
- Tödlicher Unfall (6)
- Warning (6)
- Weight (6)
- Airbag (5)
- Alte Leute (5)
- Antikollisionssystem (5)
- Auffahrunfall (5)
- Database (5)
- Electric vehicle (5)
- Elektrofahrzeug (5)
- Human body (5)
- International (5)
- Knie (menschl) (5)
- Layout (5)
- Leg (human) (5)
- Market (5)
- Markt (5)
- Messgerät (5)
- Official approval (5)
- Rear end collision (5)
- Sensor (5)
- Unfallrekonstruktion (5)
- Verformung (5)
- Veränderung (5)
- Accident rate (4)
- Bein (menschl) (4)
- Benutzung (4)
- Body (car) (4)
- Brennstoffzelle (4)
- Decke (Straße) (4)
- Deformable barrier (impact test) (4)
- Fahrzeugsitz (4)
- Fuel cell (4)
- Gestaltung (4)
- Headlamp (4)
- Hybrid vehicle (4)
- Hybridfahrzeug (4)
- Industrie (4)
- Industry (4)
- Intelligentes Transportsystem (4)
- Karosserie (4)
- Kraftfahrzeug (4)
- Lärm (4)
- Menschlicher Körper (4)
- Nachfrage (4)
- Nacht (4)
- Night (4)
- Noise (4)
- Oberfläche (4)
- Old people (4)
- Reconstruction (accid) (4)
- Reproducibility (4)
- Reproduzierbarkeit (4)
- Scheinwerfer (4)
- Seat (veh) (4)
- Straßenverkehrsrecht (4)
- Surface (4)
- Surfacing (4)
- Transport infrastructure (4)
- Unfallhäufigkeit (4)
- Use (4)
- Verkehrsinfrastruktur (4)
- Visual display (4)
- Abstandsregeltempomat (3)
- Adaptive cruise control (3)
- Air bag (restraint system) (3)
- Aktive Sicherheit (3)
- Ankündigung (3)
- Anthropmetric dummy (3)
- Antrieb (tech) (3)
- Apparatus (measuring) (3)
- Behinderter (3)
- Bicycle (3)
- Bildschirm (3)
- Brake light (3)
- Bremslicht (3)
- Bruch (mech) (3)
- Carriageway (3)
- Classification (3)
- Datenübertragung (telekom) (3)
- Daylight (3)
- Demand (3)
- Detection (3)
- Detektion (3)
- Disabled person (3)
- Driving aptitude (3)
- Emergency (3)
- Empfindlichkeit (3)
- Fahrbahn (3)
- Fahrrad (3)
- Fahrtauglichkeit (3)
- Fahrzeugbeleuchtung (3)
- Failure (3)
- Freight transport (3)
- Front (3)
- Haftung (jur) (3)
- Halswirbel (3)
- Highway (3)
- Impact study (3)
- Increase (3)
- Information (3)
- Interface (3)
- Kamera (3)
- Klassifizierung (3)
- Leuchtdichte (3)
- Liability (3)
- Luminance (3)
- Mathematical model (3)
- Medical examination (3)
- Mensch Maschine Verhältnis (3)
- Notfall (3)
- On the spot accident investigation (3)
- Optimum (3)
- Organisation (3)
- Propulsion (3)
- Prototyp (3)
- Prototype (3)
- Rear view mirror (3)
- Rechenmodell (3)
- Road user (3)
- Rolling resistance (3)
- Rollwiderstand (3)
- Rückspiegel (3)
- Sensitivity (3)
- Severity (acid (3)
- Sichtbarkeit (3)
- Straße (3)
- Tageslicht (3)
- Telecommunication (3)
- Telekommunikation (3)
- Traffic regulations (3)
- Unterfahrschutz (3)
- Untersuchung am Unfallort (3)
- Vehicle inspection (3)
- Vehicle lighting (3)
- Vergrößerung (3)
- Verkehrsteilnehmer (3)
- Versuchspuppe (3)
- Sichtbarkeit (3)
- Warnung (3)
- Windschutzscheibe (3)
- Windscreen (veh) (3)
- Wirbelsäule (3)
- Abblendlicht (2)
- Abdomen (2)
- Ablenkung (psychol) (2)
- Acceleration (2)
- Achslast (2)
- Active safety (2)
- Adolescent (2)
- Adult (2)
- Anti locking device (2)
- Articulated vehicle (2)
- Attention (2)
- Attitude (psychol) (2)
- Aufmerksamkeit (2)
- Autobahn (2)
- Autonomes Fahrzeug (2)
- Autonomous vehicle (2)
- Axle load (2)
- Baumusterzulassung (2)
- Baustelle (2)
- Beschleunigung (2)
- Bestrafung (2)
- Bicyclist (2)
- Blendung (2)
- Blind spot (veh) (2)
- Bridge (2)
- Brücke (2)
- Buch (2)
- Bumper (2)
- Camera (2)
- Car park (2)
- Cause (2)
- Cervical vertebrae (2)
- Comfort (2)
- Construction site (2)
- Contact (tyre road) (2)
- Control (2)
- Crash Test (2)
- Crashtest (2)
- Damage (2)
- Data acquisition (2)
- Data exchange (2)
- Data processing (2)
- Data transmission (telecom) (2)
- Datenaustausch (2)
- Datenerfassung (2)
- Datenverarbeitung (2)
- Dauerhaftigkeit (2)
- Deceleration (2)
- Deckschicht (2)
- Delivery vehicle (2)
- Digital model (2)
- Dipped headlight (2)
- Distraction (2)
- Durability (2)
- Echtzeit (2)
- Einstellung (psychol) (2)
- Elektronisches Stabilitätsprogramm (2)
- Erwachsener (2)
- Evaluation (2)
- Eye movement (2)
- Fahrgeschicklichkeit (2)
- Fahrleistung (2)
- Fahrsimulator (2)
- Fahrzeugabstand (2)
- Fahrzeugteile (2)
- Force (2)
- Forecast (2)
- Future transport mode (2)
- Gelenkfahrzeug (2)
- Glare (2)
- Grenzfläche (2)
- Griffigkeit (2)
- Gütertransport (2)
- Güterverkehr (2)
- Herstellung (2)
- Hinten (2)
- Hospital (2)
- Hüfte (menschl) (2)
- Individueller Verkehr (2)
- Information documentation (2)
- Intelligentes Verkehrssystem (2)
- Interactive model (2)
- Interaktives Modell (2)
- Interview (2)
- Jugendlicher (2)
- Knie (2)
- Knotenpunkt (2)
- Komfort (2)
- Kontakt Reifen-Straße (2)
- Kontrolle (2)
- Kraft (2)
- Krankenhaus (2)
- Kunststoff (2)
- Landstraße (2)
- Lichtsignal (2)
- Manufacture (2)
- Medical aspects (2)
- Medizinische Untersuchung (2)
- Mobility (2)
- Mobilität (2)
- Modell (2)
- Motorway (2)
- Nasse Straße (2)
- Numerisches Modell (2)
- Oberflächentextur (2)
- Organization (association) (2)
- Parkfläche (2)
- Penalty (2)
- Planning (2)
- Planung (2)
- Plastic material (2)
- Private transport (2)
- Prognose (2)
- Quality (2)
- Qualität (2)
- Radio (2)
- Real time (2)
- Rear (2)
- Reifenprofil (2)
- Road traffic (2)
- Rundfunk (2)
- Sachschaden (2)
- Safety glass (2)
- Sample (mater) (2)
- Schallpegel (2)
- Schutz (2)
- Sehvermögen (2)
- Sicherheitsglas (2)
- Simulator (driving) (2)
- Skidding resistance (2)
- Sound level (2)
- Spinal column (2)
- State of the art report (2)
- Steuerung (2)
- Stoßstange (2)
- Straßenverkehr (2)
- Stress (psychol) (2)
- Surface texture (2)
- Surveillance (2)
- Technische Überwachung (Fahrzeug) (2)
- Textbook (2)
- Toter Winkel (2)
- Traffic signal (2)
- Tyre tread (2)
- Underride protection (2)
- Unterleib (2)
- Ursache (2)
- Vehicle mile (2)
- Vehicle spacing (2)
- Vereinigtes Königreich (2)
- Verzögerung (2)
- Vibration (2)
- Vision (2)
- Vorn (2)
- Wearing course (2)
- Wet road (2)
- Wirksamkeitsuntersuchung (2)
- Zukünftiges Verkehrsmittel (2)
- Zulassung (tech) (2)
- Zusammenstoss (2)
- (menschl) (1)
- Abbiegen (1)
- Ablenkung (1)
- Abnutzung (1)
- Absorption (1)
- Accessibility (1)
- Accident data (1)
- Accident proneness (1)
- Accident reconstruction (1)
- Administration (1)
- Aged people (1)
- Alte leute (1)
- Alternative Energie (1)
- Alternative energy (1)
- Angle (1)
- Anhänger (1)
- Anordnung (1)
- Anthropometric body (1)
- Antiblockiereinrichtung (1)
- Antiblockiersystem (1)
- Antikollisisonssystem (1)
- Apparatus (measurement) (1)
- Apparatus [measuring] (1)
- Aquaplaning (1)
- Arbeitsgruppe (1)
- Area traffic control (1)
- Armaturenbrett (1)
- Arzneimittel (1)
- Asphaltstraße (Oberbau) (1)
- Aufprall (1)
- Augenbewegungen (1)
- Auspuff (1)
- Ballungsgebiet (1)
- Battery (1)
- Bau (1)
- Beanspruchung (1)
- Bearing capacity (1)
- Bein (1)
- Benchmark (1)
- Benefit cost analysis (1)
- Berechnung d Straßenoberbaus (1)
- Betriebsverhalten (1)
- Bibliographie (1)
- Bibliography (1)
- Biophysic (1)
- Bonnet (car) (1)
- Brake (1)
- Breaking (1)
- Breite (1)
- Bremse (1)
- Bus (1)
- Cadaver (1)
- Calibration (1)
- Carbon dioxide (1)
- Carbon monoxide (1)
- Catalysis (1)
- Cervical vertebrae; Conference; Evaluation (assessment); Injury; Spinal column; Test (1)
- Chart (1)
- Chassis (1)
- Cinematography (1)
- Coefficient of friction (1)
- Colour (1)
- Compatiblity (1)
- Components of the car (1)
- Components of the vehicle (1)
- Compression (1)
- Congestion (traffic) (1)
- Construction (1)
- Contact (Tyre road) (1)
- Conurbation (1)
- Cooperative intelligent transport system (1)
- Correlation (math, stat) (1)
- Corrosion (1)
- Crossing the road (pedestrian) (1)
- Dashboard (1)
- Data bank (1)
- Data security (1)
- Data transmission (1)
- Datensicherheit (1)
- Daytime running light (1)
- Deformable barrier (Impact test) (1)
- Deformable barrier system (impact test) (1)
- Dehnungsmessstreifen (1)
- Demand (econ) (1)
- Demografie (1)
- Demographie (1)
- Demography (1)
- Depth (1)
- Detection response task (1)
- Deterioration (1)
- Diesel engine (1)
- Dieselmotor (1)
- Dimension (1)
- Dispersion (stat) (1)
- Dissertation (1)
- Disstraction (1)
- Driver (veh) (1)
- Driver information system (1)
- Driver training (1)
- Driving (1)
- Druck (1)
- Drunkenness (1)
- Dusk (1)
- Dynamic penetration test (1)
- Dynamics (1)
- Dynamik (1)
- Dynamo (1)
- Dämmerung (1)
- EU directive (1)
- EU-Richtlinie (1)
- Economic efficiency (1)
- Economics of transport (1)
- Eichung (1)
- Eigenschaft (1)
- Eindringung (1)
- Electrode (1)
- Electroencephalography (1)
- Electronic stability program (1)
- Electronics (1)
- Elekronic stability program (1)
- Elektrode (1)
- Elektroencephalographie (1)
- Elektronik (1)
- Emission control (1)
- Emissionskontrolle (1)
- Energieeinsparung (1)
- Energy conservation (1)
- Engine capacity (1)
- Environment (1)
- Erfahrung [menschl] (1)
- Ersatzfahraufgabe (1)
- European New Car Assessment Programme (1)
- Evaluation (Assessment) (1)
- Evaluation [assessment] (1)
- Exhaust pipe (1)
- Experience [human] (1)
- Expert system (1)
- Expertensystem (1)
- Fahrassistenzsystem (1)
- Fahrausbildung (1)
- Fahrbahnmarkierung (1)
- Fahrbahnüberquerung (1)
- Fahrbare Barriere (1)
- Fahrerinformationssystem (1)
- Fahrstreifen (1)
- Fahrstreifenwechsel (1)
- Fahrwerk (1)
- Farbe (1)
- Fatigue (human) (1)
- Federal Republic of (1)
- Federung (1)
- Fernverkehrsstraße (1)
- Festigkeit (1)
- Feuer (1)
- Feuerlöscher (1)
- Film (Filmtechnik) (1)
- Finite element method (1)
- Fire (1)
- Fire extinguisher (1)
- Flexible pavement (1)
- Foot (not a measure) (1)
- Form (1)
- France (1)
- Frankreich (1)
- Frau (1)
- Freizeit (1)
- Frequency (1)
- Frequenz (1)
- Frost (1)
- Fuel (1)
- Fuß (1)
- Fußgängerbereich (1)
- Gebiet (1)
- Gebraucht (1)
- Gelände (1)
- Geländefahrzeug (1)
- Gierverhalten (1)
- Goods traffic (1)
- Graphische Darstellung (1)
- Grenzwert (1)
- Harmonisation (1)
- Harmonisierung (1)
- Harmonization (1)
- Head (human) (1)
- Height (1)
- Hell (1)
- Highway design (1)
- Hip (human) (1)
- Hubraum (1)
- Human factor (1)
- Human tolerance (1)
- Hydrocarbon (1)
- Höhe (1)
- In Bewegung (1)
- In service behaviour (1)
- In situ (1)
- Incident detection (1)
- Information management (1)
- Innenstadt (1)
- Intersection (1)
- Junction (1)
- Karte (1)
- Katalyse (1)
- Kleintransporter (1)
- Kognitive Aufgabenanforderung (1)
- Kohlendioxid (1)
- Kohlenmonoxid (1)
- Kohlenwasserstoff (1)
- Kompatiblität (1)
- Kontakt Reifen Straße (1)
- Kooperatives System (ITS) (1)
- Kopf (menschl) (1)
- Korrelation (math, stat) (1)
- Korrosion (1)
- Kraftstoff (1)
- Kraftübertragung (Fahrzeug) (1)
- Laborexperiment (1)
- Landstrasse (1)
- Lane changing (1)
- Lang-Lkw (1)
- Leichnam (1)
- Leicht (1)
- Length (1)
- Lenkrad (1)
- Leuchtdiode (1)
- Lichtstärke (1)
- Lidschlag (1)
- Lieferfahrzeug (1)
- Light (colour) (1)
- Light emitting diode (1)
- Light intensity (1)
- Lightweight (1)
- Limit (1)
- Location (1)
- Longer and heavier vehicle (1)
- Länge (1)
- Main road (1)
- Man-machine interface (1)
- Map (1)
- Materialveränderung (allg) (1)
- Matrix (1)
- Measuring (1)
- Medication (1)
- Medizinische Gesichtspunkte (1)
- Medizinische gesichtspunkte (1)
- Medizinische untersuchung (1)
- Mensch-Maschine-Schnittstelle (1)
- Menschlicher faktor (1)
- Menschlicher körper (1)
- Text (1)
- Methode der finiten Elemente (1)
- Mobile barrier (1)
- Model (not math) (1)
- Modell (non math) (1)
- Motor (1)
- Motor cycle (1)
- Motorhaube (1)
- Moving (1)
- Müdigkeit (1)
- Nachricht (1)
- Naturalistic Driving (1)
- Naturalistic driving (1)
- Nummer (1)
- Oberbau (1)
- Old People (1)
- On the right (1)
- Optische Anzeige (1)
- Organization (1)
- Ort (Position) (1)
- Overlapping (1)
- Parken (1)
- Parking (1)
- Parking place (one veh only) (1)
- Parkstand (einzeln) (1)
- Passive Sicherheit (1)
- Pavement (1)
- Pavement Management System (1)
- Pavement design (1)
- Pavement management system (1)
- Pedestrian precinct (1)
- Pelvis (1)
- Penetration (1)
- Pfahl (1)
- Physiolog Belastungsgrenze (1)
- Pile (1)
- Pkw; Verhütung (1)
- Pollutant (1)
- Population (1)
- Pressure (1)
- Probe (1)
- Productivity (1)
- Program (computer) (1)
- Properties (1)
- Prüefverfahren (1)
- Prüfkörper (1)
- Psychological aspects (1)
- Psychologie (1)
- Psychologische Gesichtspunkte (1)
- Psychology (1)
- Public transport (1)
- Publicity (1)
- Quality assurance (1)
- Qualitätssicherung (1)
- Rammsondierung (1)
- Rechenprogramm (1)
- Rechts (1)
- Recreation (1)
- Reflectorized material (1)
- Reflexstoffe (1)
- Region (1)
- Reibungsbeiwert (1)
- Retread tyre (1)
- Rippe (menschl) (1)
- Road (1)
- Road construction (1)
- Road marking (1)
- Road network (1)
- Robot (1)
- Roboter (1)
- Rotation (1)
- Route guidance (1)
- Runderneuerter Reifen (1)
- Rural road (1)
- Rutting (wheel) (1)
- Safety fence (1)
- Schadstoff (1)
- Schall (1)
- Schnittstelle (1)
- Schulter (1)
- Schutzeinrichtung (1)
- Schweregrad /Unfall (1)
- Schwingung (1)
- Schädel (1)
- Second hand (1)
- Seite (1)
- Service area (1)
- Shape (1)
- Shoulder (human) (1)
- Side (1)
- Size and weight regulations (1)
- Skill (road user) (1)
- Skull (1)
- Social factors (1)
- Sociology (1)
- Software (1)
- Sound (1)
- Soziale Faktoren (1)
- Soziologie (1)
- Spain (1)
- Spanien (1)
- Specification (standard ) (1)
- Spectrum (1)
- Spektrum (1)
- Sport utility vehicle (1)
- Spurrinne (1)
- Stadardization (1)
- Stadt (1)
- Stand der Technik (Bericht) (1)
- Standard (1)
- Standardabweichung (1)
- Statics (1)
- Statik (1)
- Statistic (1)
- Steering wheel (1)
- Steifigkeit (1)
- Stiffness (1)
- Strain gauge (1)
- Straßenbau (1)
- Straßenentwurf (1)
- Straßennetz (1)
- Strength (mater) (1)
- Stress (1)
- Stress (psycho) (1)
- Störfallentdeckung (1)
- Surrogate driving set-up (1)
- Suspension (veh) (1)
- Sustainability (1)
- Tactile perception (1)
- Tagesfahrlicht (1)
- Taktiles Signal (1)
- Tangential (1)
- Tank Rast Anlage (1)
- Technische Vorschriften (1)
- Technische Überwachung (1)
- Terrain (1)
- Tests (1)
- Thesis (1)
- Tiefe (1)
- Town centre (1)
- Toxicity (1)
- Toxizität (1)
- Tracking task (1)
- Trackingaufgabe (1)
- Traffic Control (1)
- Traffic assignment (1)
- Traffic engineering (1)
- Traffic flow (1)
- Traffic lanes (1)
- Traffic regulation (1)
- Traffic sign (1)
- Tragfähigkeit (1)
- Trailer (1)
- Train (1)
- Transmission (veh) (1)
- Transport (1)
- Trunkenheit (1)
- Tunnel (1)
- Turning (1)
- Typenzulassung (1)
- Tätigkeitsbericht (1)
- USA (1)
- Umwelt (1)
- Umweltfreundlichkeit (1)
- Underride prevention (1)
- Unfalldaten (1)
- Unfallneigung (1)
- United Kingdom (1)
- United kingdom (1)
- Urban area (1)
- Vehicle Regulations (1)
- Vehicle regulation (1)
- Veraenderung (1)
- Verkehrsfluss (1)
- Verkehrsstauung (1)
- Verkehrstechnik (1)
- Verkehrsumlegung (1)
- Verkehrswirtschaft (1)
- Verkehrszeichen (1)
- Verwaltung (1)
- Video camera (1)
- Vorne (1)
- Wasser (1)
- Water (1)
- Wear (1)
- Weather (1)
- Werbung (1)
- Width (1)
- Winkel (1)
- Wirkungsanalyse (1)
- Wirtschaftlichkeit (1)
- Witterung (1)
- Woman (1)
- Working group (1)
- Yawing (veh) (1)
- Zahl (1)
- Zentrale Verkehrssteuerung (1)
- Zielführungssystem (1)
- Zug (Eisenbahn) (1)
- Zugänglichkeit (1)
- Zusammendrückung (1)
- Zustandsbewertung (1)
- skill (1)
- Öffentlicher Verkehr (1)
- Überdeckung (1)
Institut
Qualität von on-trip Verkehrsinformationen im Straßenverkehr : BASt-Kolloquium 23. und 24.03.2011
(2011)
Am 23. und 24. März 2011 veranstaltete die Bundesanstalt fuer Straßenwesen ein, um die Ergebnisse der erwähnten Projekte und Initiativen präsentieren zu lassen und mit anderen Experten zu diskutieren. Der vorliegende Tagungsband fasst die Ergebnisse des Kolloquiums zur "Qualität von on-trip Verkehrsinformationen" zusammen. Die Bereitstellung von Verkehrsinformationen ist geprägt von vielen Akteuren. Die Wertschöpfungskette beginnt bei der Sammlung grundlegender Verkehrsdaten zur Erstellung von Verkehrsinformationen und setzt sich mit der Datenverarbeitung und -interpretation bis hin zur Meldungserstellung fort. Die Weitergabe kann über verschiedene Übertragungsmedien erfolgen und beim Nutzer (z.B. im Navigationsgerät) empfangen werden. Jeder einzelne Schritt der Wertschoepfungskette kann sowohl von unterschiedlichen Partnern (privat oder öffentlich) übernommen werden als auch in der Hand eines Partners liegen. Diese Komplexität der Zusammenarbeit spiegelt sich demzufolge auch in Qualitätsmanagementprozessen wider. Im Rahmen des Kolloquiums wurden zwei wesentliche Qualitätsaspekte näher betrachtet: - die Datenqualität mit dem Focus auf Aktualitaet, Stimmigkeit der Daten verglichen mit einer gemessenen Realitaet sowohl zu Beginn der Wertschöpfungskette als auch an jeglichen Schnittstellen, - die Prozessqualität, welche sich insbesondere mit der reibungslosen Datenübergabe an den Schnittstellen der Wertschoepfungskette beschäftigt. Beide Qualitätsaspekte helfen zu verstehen, worin die heutigen Qualitätsprobleme bestehen und welche Massnahmen im Einzelnen ergriffen werden müssten, um eine nachhaltige Verbesserung zu erreichen. Einerseits kann es vorkommen, dass die Information über ein Verkehrsereignis an einer oder mehreren Stellen der Wertschöpfungskette korrekt vorliegt, jedoch durch ungenuegende technische oder organisatorische Schnittstellen im Prozessablauf wieder verloren geht und dem Nutzer folglich nicht zur Verfügung steht. Prominentes Beispiel eines solchen Problems in der Prozessqualität ist die fehlerhafte Interpretation der Meldung im Navigationsgerät, denkbar sind solche Informationsverluste jedoch an jeder Stelle der Wertschoepfungskette. Eine wichtige Massnahme zur Verbesserung der Prozessqualität ist die Standardisierung sowie die Überprüfung, ob die definierten Standards an jeder Stelle der Wertschöpfungskette eingehalten werden. Andererseits kann es vorkommen, dass die Datenqualität in Bezug auf ihre Genauigkeit von Anfang an so schlecht ist, dass der Nutzer eine fehlerhafte oder gar keine Nachricht übermittelt bekommt. Beispiel hierfür ist die Vielzahl von Stauereignissen, die entweder nicht gesendet wurden oder gesendet wurden, obwohl sie nicht vorhanden waren. Eine wichtige Massnahme zur Verbesserung dieser Situation ist die Verbesserung der Ereignisdetektion. Der Tagungsband enthaelt Präsentationen, die den Status Quo analysieren, Methoden zur verbesserten Datenerfassung vorschlagen und Möglichkeiten zur Verbesserung von Daten- und Prozessqualität vorstellen. Offen geblieben sind darüber hinaus folgende Fragestellungen: - Wie kann die Prozessqualität der gesamten Wertschöpfungskette bei der Vielzahl der Partner kontrolliert werden? Wer überwacht die Wertschöpfungskette? Wird hierfuer überhaupt eine zentrale Stelle benötigt? Oder ist es ausreichend, wenn jeder Partner eine angemessene Eingangs bzw. Ausgangskontrolle durchführt? - Obwohl es nur eine Realität gibt, entsteht doch Wettbewerb über die (Qualität der) Information zu dieser Realität. Wie kann Konsistenz zwischen allen Anbietern von sicherheitsrelevanten Informationen erreicht werden? Wo sollte der Wettbewerb enden und wie kann dies technisch, organisatorisch und wirtschaftlich realisiert werden? - Welche Prozesse sollten geschaffen werden, um Partner zu integrieren, die sich nicht an geschaffene Qualitätsstandards halten (z.B. kommerzielle Diensteanbieter, die nicht mit der Verkehrsinformationsszene vernetzt sind)? - Und nicht zuletzt, wie kann die Wahrnehmung des Nutzers über verschiedene Qualitätslevel unterschiedlicher Produkte verbessert werden? Ist der Nutzer in der Lage, die unterschiedlichen Qualitätsstufen von Verkehrssystemen zu unterscheiden? Falls nicht, welche Art von Unterstuetzung braucht der Kunde? Ein "European Information Services Assessment Programme" vergleichbar zu Euro NCAP für Fahrzeuge? Die Ergebnisse des Kolloquiums sollen die laufende Diskussion um die Verbesserung der Qualität von Verkehrsinformationen unterstützen.
For the assessment of vehicle safety in frontal collisions, the crash compatibility between the colliding vehicles is crucial. Compatibility compromises both the self protection and the partner protection properties of vehicles. For the accident data analysis, the CCIS (GB) and GIDAS (DE) in-depth data bases were used. Selection criteria were frontal car accidents with car in compliance with ECE R94. For this study belted adult occupants in the front seats sustaining MAIS 2+ injuries were studied. Following this analysis FIMCAR concluded that the following compatibility issues are relevant: - Poor structural interaction (especially low overlap and over/underriding) - Compartment strength - Frontal force mismatch with lower priority than poor structural interaction In addition injuries arising from the acceleration loading of the occupant are present in a significant portion of frontal crashes. Based on the findings of the accident analysis the aims that shall be addressed by the proposed assessment approach were defined and priorities were allocated to them. The aims and priorities shall help to decide on suitable test procedures and appropriate metrics. In general it is anticipated that a full overlap and off-set test procedure is the most appropriate set of tests to assess a vehicle- frontal impact self and partner protection.
New vehicle types are extensively tested to check almost all factors that influence ride and handling. With reference to the Association of German Car Tuners" (VDAT e.V.) valuations, approximately 10% of all cars in Germany are being modified by their owners. 28 % of those modifications" sales are divergent wheel-tire combinations, 13 % are tuning measures on the chassis suspension or wheel spacers. In almost all cases the singular modifications present a general permission for specific vehicles they have been tested in. Combined tuning measures, however, are often checked by just one inspector, following a procedure of mostly subjective assessment criteria. Today, critical attributes are only being observed, in case a vehicle is involved in an accident and the modifications are identified as crash causal factors or as a cofactor on the development of a crash. For the first time, a field study allows a survey of safety affecting chassis modifications. The test layout has to comply with some basic conditions. Different vehicle concepts with a wide margin of modifications are required to get a high transferability of the results. A total amount of more than 150 tested vehicles serves the same purpose. The tests are limited concerning the installation time of measurement techniques and the requirement that no damage, defilement or immoderate wear of the vehicles are accepted by their owners. Due to such factors as well as the driver Ìs acceptance, the vehicles are controlled by its owners instead of robots or test drivers. For keeping down the driver- influence, the lane has narrow boundaries and the driver has to drive in strictly adherence to the given instructions. After gathering all modifications, as well as static and kinematic parameters like the toe and camber angle, dynamic testing of predominantly lateral dynamics is conducted. Besides standardized tests like the ISO 3888-2 (Obstacle Avoidance) or the ISO 14512 (Braking on Surfaces with Split Coefficient of Friction), to test the influence of modified kingpin offsets caused by wheel spacers, some deviant tests are conducted. Those are required due to the demand of objective test results for road tests with vertical induced stimulation of the chassis suspension. Hence, new tests on corner braking with and without vertical stimulation have been developed. The interpretation of data includes thresholds, e.g. the maximum entrance velocity without hitting cones, on the one hand, and the analysis of characteristics of data concerning time and frequency range, "1-second values" and peak response times on the other hand. Besides the thresholds as indicators for the achievable velocities, which are mainly affected by friction coefficients, the vehicle reaction in the course of time characterizes the vehicle reaction in the threshold range and consequently the operational demands on the driver. The field study has started and promises the first long-range analysis of chassis modifications. The results offer a basis for hypothesis and resultant further test layouts for oncoming studies of the identified critical tuning measures.
The 2BeSafe project (2-Wheeler Behaviour and Safety) is a collaborative project (co financed by the European Commission) that aims to study the naturalistic behaviour of Powered-Two-Wheeler (PTW) riders in normal and critical riding situations. That includes the interaction between PTW riders and other road users and possible conflicts between them. One of the predominant causes of accidents involving PTWs is that PTWs are often overlooked by other road users. One task of the project lead by BASt therefore deals with possible improvements in conspicuity and the development of recommendations. Particularly using the findings of the studies on conflict situations, promising lighting arrangements to enhance conspicuity of PTWs during the day and at night are selected. An abstract recognizing pattern for PTWs is defined, enabling other road users (e.g. car drivers) to clearly identify riders. Lamps and outfit like lighting configurations of different colours, different helmet lights, reflect / luminescent clothing parts and retro-reflective markings are designed and manufactured. Then, the different solutions are tested in a laboratory setting using experimental motorcycles together with riders to which the equipment is fitted. As result a proposal for a uniform signal pattern or lamp configuration in the front of all motorcycles and riders will be outlined. The contribution first gives a short overview of the topics of the research project that deal with conflicts and their connection with poor conspicuity and then presents in detail the methods used in the activities concerning solutions for the improvement of conspicuity together with first results.
Um die zukünftige Entwicklung von Fahrzeugen mit alternativem Antrieb, z.B. Hybrid-, Elektro- und Brennstoffzellenfahrzeuge, in Deutschland verfolgen und analysieren zu können, hatte die Bundesanstalt für Straßenwesen (BASt) im Jahr 2010 die Einrichtung einer langfristigen Beobachtung des Fahrzeugmarktes und einer konzentrierten Beobachtung des Unfallgeschehens initiiert, mit den Zielen, die tatsächliche Umsetzung des technologischen Fortschritts in marktgängige Produkte zu verfolgen, frühzeitig genaue Kenntnis über die sich der technologischen Entwicklung anschließenden tatsächlichen Marktentwicklung zu gewinnen, und mögliche Fehlentwicklungen - insbesondere mit Blick auf die Verkehrssicherheit zeitnah zu identifizieren. Auf Basis der bisherigen Marktentwicklung ist die Analyse des Unfallgeschehens naturgemäß noch wenig aussagekräftig. Die deutliche Zunahme der Unfallbeteiligung von Hybridfahrzeugen um 95% von 2007 bis 2010 wird durch einen Bestandsanstieg von 117% in diesem Zeitraum relativiert und deutet daher eher auf ein unterdurchschnittliches Risiko, wobei keine Informationen über die durchschnittliche Fahrleistung in die Interpretationen einbezogen werden können. Der relativ hohe Anteil von Innerortsunfällen ist vor allem vor dem Hintergrund der Nutzung der Fahrzeuge zu interpretieren.
The ASSESS project is a collaborative project that develops test procedures for pre-crash safety systems like Automatic Emergency Braking (AEB). One key criterion for the effectiveness of e.g. AEB is reduction in collision speed compared to baseline scenarios without AEB. The speed reduction for a given system can only be determined in real world tests that will end with a collision. Soft targets that are crashable up to velocities of 80 km/h are state of the art for these assessments, but ordinary balloon cars are usually stationary targets. The ASSESS project goes one step further and defines scenarios with moving targets. These scenarios define vehicle speeds of up to 100 km/h, different collision scenarios and relative collision speeds of up to 80km/h. This paper describes the development of a propulsion system for a soft target that aims to be used with these demanding scenario specifications. The Federal Highway Research Institute- (BASt-) approach to move the target is a self-driving small cart. The cart is controlled either by a driver (open-loop control via remote-control) or by a computer (closed-loop control). Its weight is limited to achieve a good crashability without damages to the test vehicle. To the extent of our knowledge BASt- approach is unique in this field (other carts cannot move at such high velocities or are not crashable). This paper describes in detail the challenges and solutions that were found both for the mechanical construction and the implementation of the control and safety system. One example for the mechanical challenges is e.g. the position of the vehicle- center of gravity (CG). An optimum compromise had to be found between a low CG oriented to the front of the vehicle (good for driveability) and a high CG oriented to the rear of the vehicle (good for crashability). The soft target itself which is also developed within the ASSESS project will not be covered in detail as this is work of a project partner. Publications on this will follow. The paper also shows first test results, describes current limitations and gives an outlook. It is expected that the presented test tools for AEB and other pre-crash safety systems is introduced in the future into consumer testing (NCAP) as well as regulatory testing.
Thoracic injury is one of the predominant types of severe injuries in frontal accidents. The assessment of the injury risk to the thorax in the current frontal impact test procedures is based on the uni-axial chest deflection measured in the dummy Hybrid III. Several studies have shown that criteria based on the linear chest potentiometer are not sensitive enough to distinguish between different restraint systems, and cannot indicate asymmetric chest loading, which has been shown to correlate to increased injury risk. Furthermore, the measurement is sensitive to belt position on the dummy chest. The objective of this study was to evaluate the optical multipoint chest deflection measurement system "RibEye" in frontal impact sled tests. Therefore the sensitivity of the RibEyesystem to different restraint system parameters was investigated. Furthermore, the issue of signal drop out at the 6 th rib was investigated in this study.A series of sled tests were conducted with the RibEye system in the Hybrid III 50%. The sled environment consisted of a rigid seat and a standard production three-point seat belt system. Rib deflections were recorded with the RibEye system and additionally with the standard chest potentiometer. The tests were carried out at crash pulses of two different velocities (30 km/h and 64 km/h). The tests were conducted with different belt routing to investigate the sensitivity of chest deflection measurements to belt position on the dummy chest. Furthermore, different restraint system parameters were investigated (force limiter level, with or without pretensioning) to evaluate if the RibEye measurements provide additional information to distinguish between restraint system configurations . The results showed that with the RibEye system it was possible to identify the effect of belt routing in more detail. The chest deflections measured with the standard chest potentiometer as well as the maximum deflection measured by RibEye allowed the distinction to be made between different force limiter levels. The RibEye system was also able to clearly show the asymmetric deflection of the rib cage due to belt loading. In some configurations, differences of more than 15 mm were observed between the left and side areas of the chest. Furthermore, the abdomen insert was identified as source of the problem of signal drop out at the 6th rib. Possible solutions are discussed. In conclusion, the RibEye system provided valuable additional information regarding the assessment of restraint systems. It has the potential to enable the evaluation of thoracic injury risk due to asymmetric loading. Further investigations with the RibEye should be extended to tests in a vehicle environment, which include a vehicle seat and other restraint system components such as an airbag.
A flexible pedestrian legform impactor (FlexPLI) has been evaluated by a Technical Evaluation Group (Flex-TEG) of the Working Party on Passive Safety (GRSP) of the United Nations Economic Commission for Europe (UN-ECE). It will be implemented within phase 2 of the global technical regulation (GTR 9) as well as within a new ECE regulation on pedestrian safety as a test tool for the assessment of lower extremity injuries in lateral vehicle-to-pedestrian accidents (UN-ECE 2010-1, 2010-2 and 2010-3). Due to its biofidelic properties in the knee and tibia section, the FlexPLI is found to having an improved knee and tibia injury assessment ability when being compared to the current legislative test tool, the lower legform impactor developed by the Pedestrian Safety Working Group of the European Enhanced Vehicle-safety Committee (EEVC WG 17). However, due to a lack of biofidelity in terms of kinematics and loadings in the femur part of the FlexPLI, an appropriate assessment of femur injuries is still outstanding. The study described in this paper is aimed to close this gap. Impactor tests with the FlexPLI at different impact heights on three vehicle frontends with Sedan, SUV and FFV shape are performed and compared to tests with a modified FlexPLI with upper body mass. Full scale validation tests using a modified crash test dummy with attached FlexPLI that are carried out for the first time prove the more humanlike responses of the femur section with applied upper body mass. Apart from that they also show that the impact conditions described in the current technical provisions for tests with the FlexPLI don"t necessarily compensate the missing torso mass in terms of knee and tibia loadings either. Therefore it can be concluded that an applied upper body mass will contribute to a more biofidelic overall behavior of the legform and subsequently an improved injury assessment ability of all lower extremity injuries addressed by the FlexPLI. Nevertheless, the validity of the original as well as the modified legform for tests against vehicles with extraordinary high bumpers as well as flat front vehicles still needs to be evaluated in detail. A first clue is given by the application of an additional accelerometer to the legform.
The BASt-project group "Legal consequences of an increase in vehicle automation" has identified, defined and consequently compiled different automation degrees beyond Driver Assistance Systems. These are partial-, high- and full automation. According to German regulatory law, i.e. the German Road Traffic Code, it has been identified that the distinctive feature of different degrees of automation is the permanent attention of the driver to the task of driving as well as the constant availability of control over the vehicle. Partial automation meets these requirements. The absence of the driver- concentration to the traffic situation and to execute control is in conflict with the use of higher degrees of vehicle automation (i.e. high and full automation). Their use is therefore presently not compatible with German law, as the human driver would violate his obligations stipulated in the Road Traffic Code when fully relying on the degree of automation these systems would offer. As far as higher degrees of automation imply free-hand driving, further research in terms of behavioural psychology is required to determine whether this hinders the driver in the execution of permanent caution as required by sec. 1 para. 1 StVO (German Road Traffic Code). As far as liabilities according to the StVG (German Road Traffic Act) are concerned, the presently reversed burden of proof on the driver within sec. 18 para. 1 S. 2 StVG might no longer be considered adequate in case of higher degrees of automation that allow the driver to draw attention from the task of driving (in case making such use of a system would be permitted by the German Road Traffic Code). The liability of the vehicle "keeper", according to the German Road Traffic Act, would remain applicable to all defined degrees of automation. In case of partial automation, the use of systems according to their limits is accentuated. The range of use that remains within the intended must be defined closely and unmistakeably. Affecting user expectations properly can immensely help to maintain safe use, in case design-measures that exclude overreliance are not available according to the current state of the art (otherwise such measures would have to be applied primarily). In case of the higher degrees of automation that no longer require the driver- permanent attention (under the presupposition their use would be permitted by the German Road Traffic Code), every accident potentially bears the risk to cause product liability on the side of the manufacturer. Liability of the manufacturer might only be excluded in case of a breach of traffic rules by a third party or in case of overriding/ oversteering by the driver. In so far aspects of German procedural law and the burden of proof are of great importance. The project group has identified the need for further continuative research not only to advance legal assessment but also to improve basic technical conditions for vehicle automation as well as product reliability.
Rechtsfolgen zunehmender Fahrzeugautomatisierung : gemeinsamer Schlussbericht der Projektgruppe
(2012)
Die BASt-Projektgruppe "Rechtsfolgen zunehmender Fahrzeugautomatisierung" hat über die heute verfügbaren Fahrerassistenzsysteme hinaus drei verschiedene Automatisierungsgrade identifiziert und begrifflich definiert: Teil-, Hoch- und Vollautomatisierung. Aus verhaltensrechtlicher Sicht haben sich als wesentliche Unterscheidungsmerkmale verschiedener Automatisierungsgrade die auf das Verkehrsgeschehen fokussierte Aufmerksamkeit des Fahrers und seine ständige Möglichkeit zur Fahrzeugsteuerung herausgestellt. Im Fall der "Teilautomatisierung" ist die Aufmerksamkeit des Fahrers ständig auf das Verkehrsgeschehen gerichtet und er hat aufgrund der permanent von ihm durchzuführenden Systemüberwachung die Möglichkeit zur Fahrzeugsteuerung, so dass dieser Automatisierungsgrad den aktuellen verhaltensrechtlichen Anforderungen entspricht. Die verhaltensrechtlich geforderte Aufmerksamkeitskonzentration auf das Verkehrsgeschehen und die möglicherweise fehlende Möglichkeit zur Fahrzeugsteuerung stehen jedoch der Nutzung höherer Automatisierungsgrade (Hoch- und Vollautomatisierung) derzeit entgegen. Ihre Nutzung ist gegenwärtig nicht mit dem Verhaltensrecht vereinbar, da der menschliche Fahrzeugführer gegen seine Pflichten verstieße, wenn er sich vollständig auf das System verlassen würde. Soweit ein Automatisierungsgrad zugleich eine freihändige Fahrzeugsteuerung vorsieht, bedürfte es der verhaltenspsychologischen Untersuchung, inwieweit dies den Fahrer in der Ausübung ständiger Vorsicht im Sinne von -§ 1 Abs. 1 StVO zu beeinträchtigen vermag. Hinsichtlich der Haftung nach dem Straßenverkehrsgesetz erscheint die Beweislastverteilung im Rahmen von -§ 18 Abs. 1 S. 2 StVG in den Fällen höherer Automatisierungsgrade (Hoch- und Vollautomatisierung) nicht mehr sachgerecht, soweit dem Fahrer in verhaltensrechtlicher Hinsicht die Ausrichtung seiner Aufmerksamkeit auf andere Tätigkeiten als die konventionelle Fahraufgabe ermöglicht wird. Die Regelungen zur Haftung des Fahrzeughalters bleiben bei allen Automatisierungsgraden weiterhin anwendbar. In Bezug auf die Produkthaftung zeigt sich im Fall der vollständig fahrerüberwachten Teilautomatisierung die Bedeutung der Systemgrenzen. Produkthaftungsrechtlich gewinnt hier die Einordnung des bestimmungsgemäßen Gebrauchs wesentlich an Bedeutung. Zur Absicherung dieses bestimmungsgemäßen Gebrauchs ist die nachhaltige Beeinflussung der Verkehrserwartung beim Benutzerkreis entscheidend, soweit nicht primär konstruktive Möglichkeiten nach dem Stand von Wissenschaft und Technik zur Verfügung stehen, um unberechtigtes Systemvertrauen auszuschließen. Bei den höheren Automatisierungsgraden, die nicht mehr der Fahrerüberwachung bedürfen (unter der Annahme, ihre Nutzung wäre verhaltensrechtlich möglich), wäre jeder Schaden, der nicht auf ein Fehlverhalten Dritter oder eine Übersteuerung des Fahrers zurückzuführen ist, geeignet, Herstellerhaftung auszulösen. Diesbezüglich spielt die Darlegungs- und Beweislast eine wesentliche Rolle. Sowohl auf Grund der offenen Fragen in der rechtlichen Bewertung als auch übergreifend zur Verbesserung technischer Ausgangsbedingungen sowie der Gebrauchssicherheit wird von der Projektgruppe weiterer Forschungsbedarf zur Fahrzeugautomatisierung formuliert.
This report presents the results of a stakeholder analysis which has been performed by the EasyWay Cooperative Systems Task Force. The stakeholder analysis aims at identifying potential roles of the road operator in the operation process of selected cooperative services and describing expectations and aspirations related to the future roles and responsibilities from a European road operator- point of view. The following cooperative services have been considered in the stakeholder analysis: Hazardous location notification, Traffic jam ahead warning, Road works warning, Automatic access control and Parking management. The stakeholder analysis used findings from previous projects and performed own studies based on desk research and expert assessments which were carried out by the task partners. The approach includes the development of high-level descriptions showing functional schemes of the operational process chains and potential roles / responsibilities related to the road operator. A deepened analysis was performed by assessing the functional schemes / role profiles and collecting opportunities, concerns, and success factors from a road operator- perspective.
To improve vehicle safety in frontal collisions, the crash compatibility between the colliding vehicles is crucial. Compatibility aims to improve both the self and partner protection properties of vehicles. Although compatibility has received worldwide attention for many years, no final assessment approach has been defined. Within the Frontal Impact and Compatibility Assessment Research (FIMCAR) project, different frontal impact test procedures (offset deformable barrier [ODB] test as currently used for Economic Commission for Europe [ECE] R94, progressive deformable barrier test as proposed by France for a new ECE regulation, moveable deformable barrier test as discussed worldwide, full-width rigid barrier test as used in Federal Motor Vehicle Safety Standard [FMVSS] 208, and full-width deformable barrier test) were analyzed regarding their potential for future frontal impact legislation. The research activities focused on car-to-car frontal impact accidents based on accident investigations involving newer cars. Test procedures were developed with both a crash test program and numerical simulations. The proposal from FIMCAR is to use a full-width test procedure with a deformable element and compatibility metrics in combination with the current offset test as a frontal impact assessment approach that also addresses compatibility. By adding a full-width test to the current ODB test it is possible to better address the issues of structural misalignment and injuries resulting from high acceleration accidents as observed in the current fleet. The estimated benefit ranges from a 5 to 12 percent reduction of fatalities and serious injuries resulting from frontal impact accidents. By using a deformable element in the full-width test, the test conditions are more representative of real-world situations with respect to acceleration pulse, restraint system triggering time, and deformation pattern of the front structure. The test results are therefore expected to better represent real-world performance of the tested car. Furthermore, the assessment of the structural alignment is more robust than in the rigid wall test.
Aus wissenschaftlichen Untersuchungen ist bekannt, dass ältere Menschen trotz ihrer langen Fahrerfahrung in spezifischen Verkehrssituationen Fahrfehler und Unsicherheiten zeigen. In zwei Experimenten an jüngeren und älteren Versuchsteilnehmern wurde im Ergonomie-Labor der Bundesanstalt für Straßenwesen (BASt) versucht, den Ursachen spezifischer Fahrfehler älterer Kraftfahrer nachzugehen. Die Ergebnisse lieferten wichtige Ansatzpunkte für die Entwicklung von Fahrerassistenzsystemen (FAS), indem Erkenntnisse zu visuellen Aufmerksamkeitsleistungen gesammelt wurden. Im Rahmen eines Doppeltätigkeitsparadigmas wurde der visuell-räumliche Aufmerksamkeitsprozess, der für das Führen von Kraftfahrzeugen von wesentlicher Bedeutung ist, nicht nur auf der Verhaltensebene, sondern auch neurophysiologisch durch die Ableitung der Hirnströme mittels EEG untersucht. Hauptaufgabe war in beiden Experimenten eine Spurhalteaufgabe, die kurvenreiches Fahren simulieren sollte. Nebenaufgabe war jeweils eine Lichtreizaufgabe, bei der so schnell wie möglich durch Tastendruck auf einen Lichtreiz reagiert werden musste. Im zweiten Experiment wurde überprüft, ob bei der Lichtreizaufgabe die Verschlechterung der Aufmerksamkeitsleistung graduell erfolgt, indem bei den Lichtreizen die Exzentrizität erweitert wurde. Die Reize wurden bilateral, in abgestufter Form in verschiedenen Sehwinkeln von der Fovea centralis präsentiert. Dargestellt werden die Versuchsdurchführung sowie die Ergebnisse für die Verhaltensdaten und die festgestellten ereigniskorrelierten Potenziale (EKP). Es zeigte sich, dass durch die Berücksichtigung zusätzlicher weiterer Exzentrizitäten die Ergebnisse der Vorgängerstudie in bedeutsamer Weise erweitert werden konnten. Für beide Gruppen zeigten sich über den Verlauf hinweg klare Anzeichen für den Verlauf kompensatorischer Prozesse, die sich für die Älteren aber nur bis zu einem Sehwinkel von 50 Grad darstellten. Bei Reizen im Sehwinkel von 60 Grad war die Detektionsleistung deutlich schlechter, vor allem bei den älteren Versuchsteilnehmern. Außerdem wurde festgestellt, dass vor allem die Älteren Beeinträchtigungen in der Detektionsleistung zeigen, wenn der Abstand zwischen zwei Reizen gering ist. Es zeigt sich, das im Hinblick auf das Übersehen von Verkehrsobjekten, das eine wesentliche Ursache von Unfällen älterer Fahrer darstellt, diese technisch - beispielsweise bei Wende- oder Abbiegeprozessen - durch einen Sehfeldassistenten unterstützt werden können. Da Ältere durch schnelle Reaktionsabfolgen stärker beansprucht werden, sind Systeme mit Warnfunktion oder teilautomatisierte Systeme eher kritisch zu sehen, da sie zusätzlichen Bedien- beziehungsweise Überwachungsaufwand erfordern.
Economic constraints nowadays require transporting greater volumes of freight at lower cost. Yet, physical profiles of trucks do not all generate the same effects on road infrastructure for a given tonnage hauled. The objective then lies in finding an optimal service level that reduces the damage caused to infrastructure. Results derived for the impact of trucks on pavements are presented. The impact of truck traffic trends on road bridges will also be discussed.rn
Das Ziel der Untersuchung war, die Grenzen der Belastbarkeit eines Rollstuhl- und Personenrückhaltesystems mit Kraftknoten nach DIN 75078-2 zu ermitteln. Dazu wurden dynamische Schlittenversuche durchgeführt, bei denen die Verzögerungspulse sowie das Gesamtgewicht von Rollstuhl und Prüfpuppe variiert wurden. Für die Untersuchungen kamen ein Prüfrollstuhl, definiert nach ISO 10542, und Rückhaltesysteme mit Kraftknoten gemäß DIN 75078-2 zum Einsatz. Das Rückhaltesystem bestand aus einem Rollstuhl- und einem Personenrückhaltesystem, wobei das Rollstuhlrückhaltesystem (RRS) mit vier bzw. sechs Gurten und entsprechenden Retraktoren an einem dynamischen Schlittenaufbau befestigt wurde. Das Personenrückhaltesystem (PRS) bestand aus einem am Rollstuhl integrierten Beckengurt sowie einem Schulterschräggurt, der am Beckengurt und am Schlittenaufbau befestigt wurde. Ferner wurden bei den Versuchen Prüfpuppen verschiedener Alters- und Gewichtsklassen (P6, HIII 5 %, HIII 50 % und HIII 95 %) eingesetzt Die Belastungsanforderungen für das Rückhaltesystem wurden sukzessiv erweitert, indem einerseits das Gesamtgewicht (Rollstuhl und Prüfpuppe) und andererseits auch die Verzögerungspulse bis zur Versagensgrenze erhöht wurden. Das Vier-Gurt-Rückhaltesystem konnte bei einem Verzögerungspuls von 10 g einem Gesamtgewicht von bis zu 221 kg standhalten. Bei einem Verzögerungspuls von 20 g und einem Gesamtgewicht von 134 kg wurde das Vier-Gurt-System bis über die Grenzen belastet. Das Sechs-Gurt-Rückhaltesystem hat Belastungen bis 221 kg standgehalten. Infolgedessen ist bei einer Erhöhung der Verzögerungspulse auf 20 g und einem Gesamtgewicht von mehr als 109 kg ein Sechs-Gurt-System zu empfehlen.
The United Nations Economic Commission for Europe Informal Group on GTR No. 7 Phase 2 are working to define a build level for the BioRID II rear impact (whiplash) crash test dummy that ensures repeatable and reproducible performance in a test procedure that has been proposed for future legislation. This includes the specification of dummy hardware, as well as the development of comprehensive certification procedures for the dummy. This study evaluated whether the dummy build level and certification procedures deliver the desired level of repeatability and reproducibility. A custom-designed laboratory seat was made using the seat base, back, and head restraint from a production car seat to ensure a representative interface with the dummy. The seat back was reinforced for use in multiple tests and the recliner mechanism was replaced by an external spring-damper mechanism. A total of 65 tests were performed with 6 BioRID IIg dummies using the draft GTR No.7 sled pulse and seating procedure. All dummies were subject to the build, maintenance, and certification procedures defined by the Informal Group. The test condition was highly repeatable, with a very repeatable pulse, a well-controlled seat back response, and minimal observed degradation of seat foams. The results showed qualitatively reasonable repeatability and reproducibility for the upper torso and head accelerations, as well as for T1 Fx and upper neck Fx. However, reproducibility was not acceptable for T1 and upper neck Fz or for T1 and upper neck My. The Informal Group has not selected injury or seat assessment criteria for use with BioRID II, so it is not known whether these channels would be used in the regulation. However, the ramping-up behavior of the dummy showed poor reproducibility, which would be expected to affect the reproducibility of dummy measurements in general. Pelvis and spine characteristics were found to significantly influence the dummy measurements for which poor reproducibility was observed. It was also observed that the primary neck response in these tests was flexion, not extension. This correlates well with recent findings from Japan and the United States showing a correlation between neck flexion and injury in accident replication simulations and postmortem human subjects (PMHS) studies, respectively. The present certification tests may not adequately control front cervical spine bumper characteristics, which are important for neck flexion response. The certification sled test also does not include the pelvis and so cannot be used to control pelvis response and does not substantially load the lumbar bumpers and so does not control these parts of the dummy. The stiffness of all spine bumpers and of the pelvis flesh should be much more tightly controlled. It is recommended that a method for certifying the front cervical bumpers should be developed. Recommendations are also made for tighter tolerance on the input parameters for the existing certification tests.
The strong prevalence of human error as a crash causation factor in motorcycle accidents calls for countermeasures that help tackling this issue. Advanced rider assistance systems pursue this goal, providing the riders with support and thus contributing to the prevention of crashes. However, the systems can only enhance riding safety if the riders use them. For this reason, acceptance is a decisive aspect to be considered in the development process of such systems. In order to be able to improve behavioural acceptance, the factors that influence the intention to use the system need to be identified. This paper examines the particularities of motorcycle riding and the characteristics of this user group that should be considered when predicting the acceptance of advanced rider assistance systems. Founded on theories predicting behavioural intention, the acceptance of technologies and the acceptance of driver support systems, a model on the acceptance of advanced rider assistance systems is proposed, including the perceived safety when riding without support, the interface design and the social norm as determinants of the usage intention. Since actual usage cannot be measured in the development stage of the systems, the willingness to have the system installed on the own motorcycle and the willingness to pay for the system are analyzed, constituting relevant conditions that allow for actual usage at a later stage. Its validation with the results from user tests on four advanced rider assistance systems allows confirming the social norm and the interface design as powerful predictors of the acceptance of ARAS, while the extent of perceived safety when riding without support did not have any predictive value in the present study.
Verschiedene Forschungsprojekte aus dem Bereich Kooperativer Systeme, die vor Kurzem gestartet sind, beschäftigen sich unter anderem mit den organisatorischen Aspekten einer Gesamtarchitektur. Eine Organisationsarchitektur beschreibt dabei die Rollen und Verantwortlichkeiten, die im Betrieb unterschiedlicher Kooperativer Anwendungen auftreten. In den Projekten erfolgt zumeist eine Betrachtung der Organisationsarchitektur anhand konkreter Implementierungsszenarien oder Use Cases. Der im Bericht dokumentierte aktuelle Stand der abstrakten Beschreibung der Rollen und Verantwortlichkeiten soll den Projekten und Initiativen als Diskussionsgrundlage und Ausgangspunkt für die Erarbeitung einer möglichen Organisationsarchitektur Kooperativer Systeme und deren Ausgestaltung dienen.
Although the bus belongs to the safest traffic means, single accidents can be particularly severe and concern many passengers. Especially in case of fires a high number of injured and killed persons can be the outcome. Fire safety of buses therefore is of high importance. With the increase of synthetic and plastic materials as a material for the interior equipment of buses and coaches because of their ood mechanical properties combined with low weight, the question arises whether the safety level has decreased in case of a fire during the last years - also compared to other means of transport. Because of the combustible plastics and their ability to release a high amount of heat the main fire load in buses is no longer the fuel but the plastic materials which are also often easy to ignite. Besides the flammability of the equipments, the production of smoke, the smoke development and propagation and its toxicity for the people as well as the testing methods and limit values are of interest. For those reasons research projects were initiated on behalf of the German Federal Highway Research Institute. At the one hand the fire behavior of coach interiors was examined in general focusing on fire propagation as well as fire detection and signalling. As result, recommendations with regard to early fire detection systems for the engine compartments and on-board extinguishing equipment were elaborated. At the other hand research is carried out to examine heat release, smoke, smoke propagation and its toxicity due to burning bus interior materials. The paper describes which effective and economically reasonable fire safety requirements for interiors of buses would improve the current situation. Proposals for amendments of current requirements are recommended including the specification of appropriate limit values. In particular, it is taken into consideration which reasonable fire safety standards from other transport sectors, especially the rail sector, should be transferred to buses.
Die UNECE Regelung R58 regelt die Beschaffenheit und die Installation von Heckunterfahrschutzsystemen an schweren Güterkraftfahrzeugen, deren Ziel die Verbesserung der Kompabilität zwischen Pkw-Frontstrukturen und Lkw-Hecks ist. Dennoch verunglücken laut amtlicher Unfallstatistik allein in Deutschland rund 30 Pkw-Insassen in Heckauffahrunfällen auf Lkw tödlich, da diese Vorrichtungen hinsichtlich Einbauhöhe und Steifigkeit den Anforderungen des realen Unfallgeschehens nicht genügen. Das Ziel dieser Studie ist eine quantitative Abschätzung der möglichen Reduzierung der Verletzungsschwere mit Hilfe eines statistischen Modells, die durch eine Anpassung der geltenden Bestimmungen und die damit verbundenen technischen Veränderungen des bereits vorgeschriebenen Heckunterfahrschutzes zu erreichen wäre. In einer Nutzen-Kosten-Analyse wird die Wirtschaftlichkeit dieser Modifizierungen mit einem idealen Notbremsassistenten verglichen. Die Untersuchung orientiert sich dabei an den aktuell in der UN-ECE WP29/GRSG in Genf diskutierten Vorschlägen zur Anpassung der ECE-R58. Das verwendete ordinale Probit-Modell stellt einen Zusammenhang zwischen der Verletzungsschwere im auffahrenden PKW und erklärenden Größen her, in diesem Fall der kinetischen Energie des unterfahrenden Pkws und der strukturellen lnteraktion zwischen Lkw-Heck und Pkw-Front. Diese Maßnahmen könnten demnach 53 - 78% der Getöteten sowie 27 - 49% der Schwerverletzten bei diesen Unfallkonstellationen reduzieren, was pro Jahr 20 Getöteten und 95 Schwerverletzten entsprechen würde. Somit würde eine Modifikation einer bestehenden passiven Schutzmaßnahme an jährlich 100.000 neuzugelassenen Lkw und Anhängern bereits 20 Getötete adressieren. Im Vergleich dazu müssten jährlich 3 Millionen Pkw mit zusätzlicher Sensorik und Aktuatorik für einen idealen Notbremsassistenten ausgestattet werden, um im Idealfall alle Heckauffahrunfälle von Pkw auf andere Pkw oder Lkw und damit 53 Getötete zu vermeiden. Daher fällt auch das Nutzen-Kosten-Verhältnis deutlich zugunsten des verbesserten Heckunterfahrschutzes aus.