Abteilung Fahrzeugtechnik
Filtern
Erscheinungsjahr
Dokumenttyp
Sprache
- Englisch (90)
- Deutsch (51)
- Mehrsprachig (1)
Volltext vorhanden
- nein (142) (entfernen)
Schlagworte
- Safety (53)
- Sicherheit (53)
- Anfahrversuch (38)
- Vehicle (37)
- Bewertung (36)
- Evaluation (assessment) (36)
- Fahrzeug (36)
- Impact test (veh) (35)
- Test method (31)
- Prüfverfahren (29)
- Conference (25)
- Konferenz (24)
- Versuch (24)
- Test (23)
- Dummy (22)
- Fußgänger (22)
- Pedestrian (22)
- Accident (20)
- Driver assistance system (20)
- Unfall (20)
- Anthropometric dummy (19)
- Fahrerassistenzsystem (19)
- Injury (19)
- Verletzung (19)
- Simulation (18)
- Collision (17)
- Deutschland (16)
- Germany (16)
- Compatibility (15)
- Kompatibilität (15)
- Zusammenstoß (15)
- Europa (14)
- Europe (14)
- Frontalzusammenstoß (14)
- Head on collision (14)
- Car (13)
- Driver information (13)
- Fahrerinformation (13)
- Head (13)
- Kopf (13)
- Analyse (math) (12)
- Analysis (math) (12)
- Biomechanik (12)
- Driver (12)
- Fahrer (12)
- Fahrzeugführung (12)
- Radfahrer (12)
- Shock (12)
- Biomechanics (11)
- Child (11)
- Gesetzgebung (11)
- Kind (11)
- Legislation (11)
- Method (11)
- Passive safety system (11)
- Passives Sicherheitssystem (11)
- Pkw (11)
- Research project (11)
- Schlag (11)
- Verfahren (11)
- injury) (11)
- Cyclist (10)
- Driving (veh) (10)
- Forschungsarbeit (10)
- Measurement (10)
- Messung (10)
- Schweregrad (Unfall, Verletzung) (10)
- Technische Vorschriften (Kraftfahrzeug) (10)
- Verletzung) (10)
- Automatic (9)
- Automatisch (9)
- Autonomes Fahren (9)
- Autonomous driving (9)
- Behaviour (9)
- EU (9)
- Electronic driving aid (9)
- Elektronische Fahrhilfe (9)
- Schweregrad (Unfall (9)
- Severity (accid, injury) (9)
- Standardisierung (9)
- Technologie (9)
- Technology (9)
- Vehicle regulations (9)
- Verhalten (9)
- Bemessung (8)
- Design (overall design) (8)
- Improvement (8)
- Lkw (8)
- Lorry (8)
- Motorrad (8)
- Seitlicher Zusammenstoß (8)
- Severity (accid (8)
- Side impact (8)
- Verbesserung (8)
- Accident prevention (7)
- Active safety system (7)
- Aktives Sicherheitssystem (7)
- Ausrüstung (7)
- Brustkorb (7)
- Communication (7)
- Development (7)
- Entwicklung (7)
- Equipment (7)
- Insasse (7)
- Kommunikation (7)
- Motorcycle (7)
- Standardization (7)
- Thorax (7)
- Unfallverhütung (7)
- Vehicle occupant (7)
- Wirtschaftlichkeitsrechnung (7)
- Cost benefit analysis (6)
- Fahrstabilität (6)
- Fahrzeuginnenraum (6)
- Impact test (6)
- Interior (veh) (6)
- Knee (human) (6)
- Leistungsfähigkeit (allg) (6)
- Motorcyclist (6)
- Motorradfahrer (6)
- Norm (tech) (6)
- Specification (standard) (6)
- Traffic (6)
- Vehicle handling (6)
- Verkehr (6)
- Alte Leute (5)
- Aufprallschlitten (5)
- Crash helmet (5)
- Deformation (5)
- Deformierbare Barriere (Anpralltest) (5)
- Efficiency (5)
- Ergonomics (5)
- Fatality (5)
- Geschwindigkeit (5)
- Impact sled (5)
- Leg (human) (5)
- Official approval (5)
- Prevention (5)
- Reaction (human) (5)
- Reaktionsverhalten (5)
- Safety belt (5)
- Schutzhelm (5)
- Sicherheitsgurt (5)
- Speed (5)
- Statistics (5)
- Statistik (5)
- Traffic control (5)
- Tödlicher Unfall (5)
- Verkehrssteuerung (5)
- Airbag (4)
- Bein (menschl) (4)
- Belastung (4)
- Braking (4)
- Bremsung (4)
- Collision avoidance system (4)
- Database (4)
- Datenbank (4)
- Decrease (4)
- Ergonomie (4)
- Error (4)
- Fehler (4)
- Gewicht (4)
- Knie (menschl) (4)
- Lenken (Fahrzeug) (4)
- Load (4)
- Modification (4)
- Old people (4)
- Perception (4)
- Reproducibility (4)
- Reproduzierbarkeit (4)
- Richtlinien (4)
- Risiko (4)
- Risk (4)
- Specifications (4)
- Steering (process) (4)
- Verformung (4)
- Verhütung (4)
- Verminderung (4)
- Wahrnehmung (4)
- Weight (4)
- Anthropmetric dummy (3)
- Antikollisionssystem (3)
- Auffahrunfall (3)
- Behinderter (3)
- Benutzung (3)
- Classification (3)
- Deformable barrier (impact test) (3)
- Disabled person (3)
- Driving aptitude (3)
- Emission (3)
- Fahrtauglichkeit (3)
- Fahrzeugsitz (3)
- Human body (3)
- Impact study (3)
- International (3)
- Klassifizierung (3)
- Kraftfahrzeug (3)
- Mathematical model (3)
- Menschlicher Körper (3)
- Messgerät (3)
- Nacht (3)
- Night (3)
- Organisation (3)
- Rear end collision (3)
- Rechenmodell (3)
- Reifen (3)
- Road user (3)
- Seat (veh) (3)
- Severity (acid (3)
- Telecommunication (3)
- Telekommunikation (3)
- Telematics (3)
- Telematik (3)
- Tyre (3)
- Unterfahrschutz (3)
- Use (3)
- Verkehrsteilnehmer (3)
- Veränderung (3)
- Warning (3)
- Abdomen (2)
- Accident rate (2)
- Active safety (2)
- Adolescent (2)
- Air bag (restraint system) (2)
- Aktive Sicherheit (2)
- Ankündigung (2)
- Anti locking device (2)
- Apparatus (measuring) (2)
- Attitude (psychol) (2)
- Autonomes Fahrzeug (2)
- Autonomous vehicle (2)
- Baumusterzulassung (2)
- Bicycle (2)
- Bicyclist (2)
- Body (car) (2)
- Buch (2)
- Cause (2)
- Cervical vertebrae (2)
- Crash Test (2)
- Deceleration (2)
- Delivery vehicle (2)
- Detection (2)
- Detektion (2)
- Digital model (2)
- Einstellung (psychol) (2)
- Empfindlichkeit (2)
- Eye movement (2)
- Fahrrad (2)
- Force (2)
- Forschungsbericht (2)
- Front (2)
- Fuel consumption (2)
- Gestaltung (2)
- Halswirbel (2)
- Headlamp (2)
- Hospital (2)
- Hüfte (menschl) (2)
- Individueller Verkehr (2)
- Industrie (2)
- Industry (2)
- Intelligent transport system (2)
- Interface (2)
- Interview (2)
- Jugendlicher (2)
- Karosserie (2)
- Knie (2)
- Kraft (2)
- Kraftstoffverbrauch (2)
- Krankenhaus (2)
- Layout (2)
- Lärm (2)
- Mobility (2)
- Mobilität (2)
- Noise (2)
- Numerisches Modell (2)
- On the spot accident investigation (2)
- Organization (association) (2)
- Private transport (2)
- Prototyp (2)
- Prototype (2)
- Prüfstand (2)
- Reconstruction (accid) (2)
- Scheinwerfer (2)
- Schutz (2)
- Sensitivity (2)
- Sensor (2)
- Sichtbarkeit (2)
- Spinal column (2)
- State of the art report (2)
- Straßenverkehrsrecht (2)
- Stress (psychol) (2)
- Test rig (2)
- Textbook (2)
- Underride protection (2)
- Unfallhäufigkeit (2)
- Unfallrekonstruktion (2)
- Unterleib (2)
- Untersuchung am Unfallort (2)
- Ursache (2)
- Vehicle inspection (2)
- Verzögerung (2)
- Sichtbarkeit (2)
- Visual display (2)
- Wirbelsäule (2)
- Wirksamkeitsuntersuchung (2)
- Zulassung (tech) (2)
- Zusammenstoss (2)
- (menschl) (1)
- Ablenkung (1)
- Ablenkung (psychol) (1)
- Abnutzung (1)
- Absorption (1)
- Abstandsregeltempomat (1)
- Acceleration (1)
- Accident data (1)
- Accident proneness (1)
- Adaptive cruise control (1)
- Adult (1)
- Aged people (1)
- Angle (1)
- Anhänger (1)
- Antiblockiereinrichtung (1)
- Antiblockiersystem (1)
- Antikollisisonssystem (1)
- Apparatus (measurement) (1)
- Area traffic control (1)
- Arzneimittel (1)
- Asphaltstraße (Oberbau) (1)
- Attention (1)
- Aufmerksamkeit (1)
- Aufprall (1)
- Augenbewegungen (1)
- Autobahn (1)
- Battery (1)
- Baustelle (1)
- Bein (1)
- Benchmark (1)
- Benefit cost analysis (1)
- Beschleunigung (1)
- Bestrafung (1)
- Betriebsverhalten (1)
- Bildschirm (1)
- Biophysic (1)
- Blendung (1)
- Blind spot (veh) (1)
- Bonnet (car) (1)
- Brake (1)
- Brake light (1)
- Bremse (1)
- Bremslicht (1)
- Bridge (1)
- Bruch (mech) (1)
- Brücke (1)
- Bumper (1)
- Bus (1)
- Cadaver (1)
- Calibration (1)
- Carbon dioxide (1)
- Chassis (1)
- Cinematography (1)
- Compatiblity (1)
- Components of the car (1)
- Compression (1)
- Construction site (1)
- Contact (tyre road) (1)
- Control (1)
- Cooperative intelligent transport system (1)
- Correlation (math, stat) (1)
- Crashtest (1)
- Crossing the road (pedestrian) (1)
- Damage (1)
- Data acquisition (1)
- Data exchange (1)
- Data processing (1)
- Data security (1)
- Data transmission (telecom) (1)
- Datenaustausch (1)
- Datenerfassung (1)
- Datensicherheit (1)
- Datenverarbeitung (1)
- Datenübertragung (telekom) (1)
- Dauerhaftigkeit (1)
- Daylight (1)
- Deformable barrier (Impact test) (1)
- Deformable barrier system (impact test) (1)
- Dehnungsmessstreifen (1)
- Demografie (1)
- Demographie (1)
- Demography (1)
- Diesel engine (1)
- Dieselmotor (1)
- Dimension (1)
- Disstraction (1)
- Distraction (1)
- Driver (veh) (1)
- Driver training (1)
- Drunkenness (1)
- Durability (1)
- Dynamo (1)
- Echtzeit (1)
- Economic efficiency (1)
- Economics of transport (1)
- Eichung (1)
- Electric vehicle (1)
- Electroencephalography (1)
- Electronic stability program (1)
- Elektroencephalographie (1)
- Elektrofahrzeug (1)
- Elektronisches Stabilitätsprogramm (1)
- Emission control (1)
- Emissionskontrolle (1)
- Engine capacity (1)
- Environment (1)
- Erwachsener (1)
- European New Car Assessment Programme (1)
- Expert system (1)
- Expertensystem (1)
- Fahrassistenzsystem (1)
- Fahrausbildung (1)
- Fahrbahnmarkierung (1)
- Fahrbahnüberquerung (1)
- Fahrgeschicklichkeit (1)
- Fahrleistung (1)
- Fahrsimulator (1)
- Fahrstreifen (1)
- Fahrstreifenwechsel (1)
- Fahrwerk (1)
- Fahrzeugabstand (1)
- Fahrzeugbeleuchtung (1)
- Fahrzeugteile (1)
- Failure (1)
- Fatigue (human) (1)
- Federung (1)
- Feuer (1)
- Film (Filmtechnik) (1)
- Finite element method (1)
- Fire (1)
- Flexible pavement (1)
- Foot (not a measure) (1)
- Form (1)
- France (1)
- Frankreich (1)
- Frau (1)
- Freight transport (1)
- Freizeit (1)
- Frequency (1)
- Frequenz (1)
- Future transport mode (1)
- Fuß (1)
- Fußgängerbereich (1)
- Geländefahrzeug (1)
- Glare (1)
- Grenzfläche (1)
- Grenzwert (1)
- Güterverkehr (1)
- Haftung (jur) (1)
- Harmonization (1)
- Head (human) (1)
- Height (1)
- Herstellung (1)
- Highway (1)
- Highway design (1)
- Hinten (1)
- Hip (human) (1)
- Hubraum (1)
- Höhe (1)
- In Bewegung (1)
- In service behaviour (1)
- In situ (1)
- Incident detection (1)
- Information (1)
- Information documentation (1)
- Innenstadt (1)
- Intelligentes Transportsystem (1)
- Intelligentes Verkehrssystem (1)
- Interactive model (1)
- Interaktives Modell (1)
- Intersection (1)
- Kamera (1)
- Kleintransporter (1)
- Knotenpunkt (1)
- Kohlendioxid (1)
- Kompatiblität (1)
- Kontakt Reifen Straße (1)
- Kooperatives System (ITS) (1)
- Kopf (menschl) (1)
- Korrelation (math, stat) (1)
- Kunststoff (1)
- Landstraße (1)
- Lane changing (1)
- Leichnam (1)
- Leuchtdichte (1)
- Liability (1)
- Lichtsignal (1)
- Lidschlag (1)
- Lieferfahrzeug (1)
- Limit (1)
- Luminance (1)
- Manufacture (1)
- Market (1)
- Markt (1)
- Medical aspects (1)
- Medical examination (1)
- Medication (1)
- Medizinische Gesichtspunkte (1)
- Medizinische Untersuchung (1)
- Mensch Maschine Verhältnis (1)
- Text (1)
- Methode der finiten Elemente (1)
- Motor cycle (1)
- Motorhaube (1)
- Motorway (1)
- Moving (1)
- Müdigkeit (1)
- Nachricht (1)
- Nasse Straße (1)
- Naturalistic Driving (1)
- Naturalistic driving (1)
- Oberfläche (1)
- Oberflächentextur (1)
- Optimum (1)
- Optische Anzeige (1)
- Organization (1)
- Overlapping (1)
- Pavement Management System (1)
- Pavement management system (1)
- Pedestrian precinct (1)
- Pelvis (1)
- Penalty (1)
- Pfahl (1)
- Pile (1)
- Planning (1)
- Planung (1)
- Plastic material (1)
- Population (1)
- Productivity (1)
- Program (computer) (1)
- Prüefverfahren (1)
- Psychologie (1)
- Psychology (1)
- Public transport (1)
- Publicity (1)
- Quality (1)
- Qualität (1)
- Real time (1)
- Rear (1)
- Rear view mirror (1)
- Rechenprogramm (1)
- Recreation (1)
- Reflectorized material (1)
- Reflexstoffe (1)
- Research report (1)
- Retread tyre (1)
- Rippe (menschl) (1)
- Road marking (1)
- Road traffic (1)
- Robot (1)
- Roboter (1)
- Rotation (1)
- Runderneuerter Reifen (1)
- Rural road (1)
- Rutting (wheel) (1)
- Rückspiegel (1)
- Sachschaden (1)
- Safety fence (1)
- Schall (1)
- Schallpegel (1)
- Schnittstelle (1)
- Schulter (1)
- Schutzeinrichtung (1)
- Schweregrad /Unfall (1)
- Schwingung (1)
- Schädel (1)
- Sehvermögen (1)
- Seite (1)
- Shape (1)
- Shoulder (human) (1)
- Side (1)
- Simulator (driving) (1)
- Size and weight regulations (1)
- Skill (road user) (1)
- Skull (1)
- Social factors (1)
- Sociology (1)
- Sound (1)
- Sound level (1)
- Soziale Faktoren (1)
- Soziologie (1)
- Spain (1)
- Spanien (1)
- Spectrum (1)
- Spektrum (1)
- Sport utility vehicle (1)
- Spurrinne (1)
- Stadardization (1)
- Stand der Technik (Bericht) (1)
- Steuerung (1)
- Stoßstange (1)
- Strain gauge (1)
- Straße (1)
- Straßenentwurf (1)
- Straßenverkehr (1)
- Stress (1)
- Störfallentdeckung (1)
- Surface (1)
- Surface texture (1)
- Suspension (veh) (1)
- Tageslicht (1)
- Tangential (1)
- Technische Vorschriften (1)
- Technische Überwachung (1)
- Technische Überwachung (Fahrzeug) (1)
- Tests (1)
- Toter Winkel (1)
- Town centre (1)
- Toxicity (1)
- Toxizität (1)
- Traffic lanes (1)
- Traffic regulation (1)
- Traffic regulations (1)
- Traffic sign (1)
- Traffic signal (1)
- Trailer (1)
- Train (1)
- Transport (1)
- Transport infrastructure (1)
- Trunkenheit (1)
- Typenzulassung (1)
- Tätigkeitsbericht (1)
- USA (1)
- Umwelt (1)
- Underride prevention (1)
- Unfalldaten (1)
- Unfallneigung (1)
- United Kingdom (1)
- Vehicle Regulations (1)
- Vehicle lighting (1)
- Vehicle mile (1)
- Vehicle regulation (1)
- Vehicle spacing (1)
- Veraenderung (1)
- Vereinigtes Königreich (1)
- Verkehrsinfrastruktur (1)
- Verkehrswirtschaft (1)
- Verkehrszeichen (1)
- Vibration (1)
- Video camera (1)
- Vision (1)
- Vorn (1)
- Vorne (1)
- Warnung (1)
- Wear (1)
- Weather (1)
- Werbung (1)
- Wet road (1)
- Windschutzscheibe (1)
- Windscreen (veh) (1)
- Winkel (1)
- Wirkungsanalyse (1)
- Wirtschaftlichkeit (1)
- Witterung (1)
- Woman (1)
- Zentrale Verkehrssteuerung (1)
- Zug (Eisenbahn) (1)
- Zukünftiges Verkehrsmittel (1)
- Zusammendrückung (1)
- Öffentlicher Verkehr (1)
- Überdeckung (1)
Institut
The objective of this deliverable is to describe the expected influence of the candidate test procedures developed in FIMCAR for frontal impact on other impact types. The other impact types of primary interest are front-to-side impacts, collisions with road restraint systems (e.g. guardrails), and heavy goods vehicle impacts. These collision types were chosen as they involve structures that can be adapted to improve safety. Collisions with vulnerable road users (VRU) were not explicitly investigated in FIMCAR. It is expected that the vehicle structures of interest in FIMCAR can be designed into a VRU friendly shell. Information used for this deliverable comes from simulations and car-to-car crash tests conducted in FIMCAR or review of previous research. Three test configurations (full width, offset, and moving deformable barriers) were the input to the FIMCAR selection process. There are three different types of offset tests and two different full width tests. During the project test procedures could be divided into three groups that provide different influences or outcomes on vehicle designs: 1. The ODB barrier provides a method to assess part of the vehicles energy absorption capabilities and compartment test in one test. 2. The FWRB and FWDB have similar capabilities to control structural alignment, further assess energy absorption capabilities, and promote the improvements in the occupant restraint system for high deceleration impacts. 3. The PDB and MPDB can be used to promote better load spreading in the vehicle structures, in addition to assessing energy absorption and occupant compartment strength in an offset configuration. The consortium selected the ODB and FWDB as the two best candidates for short term application in international rulemaking. The review of how all candidates would affect vehicle performance in other impacts (beside front-to-front vehicle or frontal impacts with fixed obstacles) however is reported in this deliverable to support the benefit analysis reported in FIMCAR. The grouping presented above is used to discuss all five test candidates using similarities between certain tests and thereby simplify the discussion.
The objectives of the FIMCAR (Frontal Impact and Compatibility Assessment Research) project are to answer the remaining open questions identified in earlier projects (such as understanding of the advantages and disadvantages of force based metrics and barrier deformation based metrics, confirmation of specific compatibility issues such as structural interaction, investigation of force matching) and to finalise the frontal impact test procedures required to assess compatibility. Research strategies and priorities were based on earlier research programs and the FIMCAR accident data analysis. The identified real world safety issues were used to develop a list of compatibility characteristics which were then prioritised within the consortium. This list was the basis for evaluating the different test candidates. This analysis resulted in the combination of the Full Width Deformable Barrier test (FWDB) with compatibility metrics and the existing Offset Deformable Barrier (ODB) as described in UN-ECE Regulation 94 with additional cabin integrity requirement as being proposed as the FIMCAR assessment approach. The proposed frontal impact assessment approach addresses many of the issues identified by the FIMCAR consortium but not all frontal impact and compatibility issues could be addressed.
Road markings are an essential component of a safe road. In particular, the optical guidance at night and under wet conditions rates high. Special surface textures of road markings can enhance the nighttime visibility during wetness, but they can lead on the other hand to noise emission during passages of vehicles and thus annoy residents. In the present study the tyre/road marking noise is analysed based on two different measurement methods for traffic noise: Several different road markings with increased nighttime visibility during wetness were overrun and the noise was determined by controlled coast-by measurements as well as close-proximity measurements. For both measuring methods the averaged A-weighted sound pressure levels were determined and an analysis of the third octave spectra was performed in order to identify annoying tonal components. The results of both measurement methods were compared with each other. Limitations of the individual measurement methods were overcome by combining the data. Properties of road marking noise depending on the texture of the marking are discussed in relation to those of road surface noise. The results will help specifying road marking texture types that ensure less annoyance and at the same time good visibility at wetness and night-time.
For the assessment of vehicle safety in frontal collisions compatibility (which consists of self and partner protection) between opponents is crucial. Although compatibility has been analysed worldwide for over 10 years, no final assessment approach has been defined to date. Taking into account the European Enhanced Vehicle safety Committee (EEVC) compatibility and frontal impact working group (WG15) and the FP5 VC-COMPAT project activities, two test approaches have been identified as the most promising candidates for the assessment of compatibility. Both are composed of an off-set and a full overlap test procedure. In addition another procedure (a test with a moving deformable barrier) is getting more attention in current research programmes. The overall objective of the FIMCAR project is to complete the development of the candidate test procedures and propose a set of test procedures suitable for regulatory application to assess and control a vehicle- frontal impact and compatibility crash safety. In addition an associated cost benefit analysis should be performed. The objectives of the work reported in this deliverable were to review existing full-width test procedures and their discussed compatibility metrics, to report recent activities and findings with respect to full-width assessment procedures and to assess test procedures and metrics. Starting with a review of previous work, candidate metrics and associated performance limits to assess a vehicle- structural interaction potential, in particular its structural alignment, have been developed for both the Full Width Deformable Barrier (FWDB) and Full Width Rigid Barrier (FWRB) tests. Initial work was performed to develop a concept to assess a vehicle- frontal force matching. However, based on the accident analyses performed within FIMCAR frontal force matching was not evaluated as a first priority and thus in line with FIMCAR strategy the focus was put on the development of metrics for the assessment of structural interaction which was evaluated as a first priority.
Accident analysis
(2014)
For the assessment of vehicle safety in frontal collisions compatibility (which consists of self and partner protection) between opponents is crucial. Although compatibility has been analysed worldwide for years, no final assessment approach has been defined to date. Taking into account the European Enhanced Vehicle safety Committee (EEVC) compatibility and frontal impact working group (WG15) and the EC funded FP5 VC-COMPAT project activities, two test approaches have been identified as the most promising candidates for the assessment of compatibility. Both are composed of an off-set and a full overlap test procedure. In addition another procedure (a test with a moving deformable barrier) is getting more attention in today- research programmes. The overall objective of the FIMCAR project is to complete the development of the candidate test procedures and propose a set of test procedures suitable for regulatory application to assess and control a vehicle- frontal impact and compatibility crash safety. In addition an associated cost benefit analysis should be performed. The specific objectives of the work reported in this deliverable were: - Determine if previously identified compatibility issues are still relevant in current vehicle fleet: Structural interaction, Frontal force matching, Compartment strength in particular for light cars. - Determine nature of injuries and injury mechanisms: Body regions injured o Injury mechanism: Contact with intrusion, Contact, Deceleration / restraint induced. The main data sources for this report were the CCIS and Stats 19 databases from Great Britain and the GIDAS database from Germany. The different sampling and reporting schemes for the detailed databases (CCIS & GIDAS) sometimes do not allow for direct comparisons of the results. However the databases are complementary " CCIS captures more severe collisions highlighting structure and injury issues while GIDAS provides detailed data for a broader range of crash severities. The following results represent the critical points for further development of test procedures in FIMCAR.
Cost benefit analysis
(2014)
Although the number of road accident casualties in Europe is falling the problem still remains substantial. In 2011 there were still over 30,000 road accident fatalities [EC 2012]. Approximately half of these were car occupants and about 60 percent of these occurred in frontal impacts. The next stage to improve a car- safety performance in frontal impacts is to improve its compatibility for car-to-car impacts and for collisions against objects and HGVs. Compatibility consists of improving both a car- self and partner protection in a manner such that there is good interaction with the collision partner and the impact energy is absorbed in the car- frontal structures in a controlled way which results in a reduction of injuries. Over the last ten years much research has been performed which has found that there are four main factors related to a car- compatibility [Edwards 2003, Edwards 2007]. These are structural interaction potential, frontal force matching, compartment strength and the compartment deceleration pulse and related restraint system performance. The objective of the FIMCAR FP7 EC-project was to develop an assessment approach suitable for regulatory application to control a car- frontal impact and compatibility crash performance and perform an associated cost benefit analysis for its implementation.
For the assessment of vehicle safety in frontal collisions compatibility (which consists of self and partner protection) between opponents is crucial. Although compatibility has been analysed worldwide for over 10 years, no final assessment approach has been defined to date. Taking into account the European Enhanced Vehicle safety Committee (EEVC) compatibility and the final report to the steering committee on frontal impact [Faerber 2007] and the FP5 VC-COMPAT[Edwards 2007] project activities, two test approaches were identified as the most promising candidates for the assessment of compatibility. Both are composed of an off-set and a full overlap test procedure. In addition another procedure (a test with a moving deformable barrier) is getting more attention in current research programmes. The overall objective of the FIMCAR project is to complete the development of the candidate test procedures and propose a set of test procedures suitable for regulatory application to assess and control a vehicle- frontal impact and compatibility crash safety. In addition an associated cost benefit analysis will be performed. In the FIMCAR Deliverable D 3.1 [Adolph 2013] the development and assessment of criteria and associated performance limits for the full width test procedure were reported. In this Deliverable D3.2 analyses of the test data (full width tests, car-to-car tests and component tests), further development and validation of the full width assessment protocol and development of the load cell and load cell wall specification are reported. The FIMCAR full-width assessment procedure consists of a 50 km/h test against the Full Width Deformable Barrier (FWDB). The Load Cell Wall behind the deformable element assesses whether or not important Energy Absorbing Structures are within the Common Interaction Zone as defined based on the US part 581 zone. The metric evaluates the row forces and requires that the forces directly above and below the centre line of the Common Interaction Zone exceed a minimum threshold. Analysis of the load spreading showed that metrics that rely on sum forces of rows and columns are within acceptable tolerances. Furthermore it was concluded that the Repeatability and Reproducibility of the FWDB test is acceptable. The FWDB test was shown to be capable to detect lower load paths that are beneficial in car-to-car impacts.
In the European Project FIMCAR, a proposal for a frontal impact test configuration was developed which included an additional full width deformable barrier (FWDB) test. Motivation for the deformable element was partly to measure structural forces as well as to produce a severe crash pulse different from that in the offset test. The objective of this study was to analyze the safety performance of vehicles in the full width rigid barrier test (FWRB) and in the full width deformable barrier test (FWDB). In total, 12 vehicles were crashed in both configurations. Comparison of these tests to real world accident data was used to identify the crash barrier most representative of real world crashes. For all vehicles, the airbag visible times were later in the FWDB configuration. This was attributed to the attenuation of the initial acceleration peak, observed in FWRB tests, by the addition of the deformable element. These findings were in alignment with airbag triggering times seen in real world crash data. Also, the dummy loadings were slightly worse in FWDB compared to FWRB tests, which is possibly linked to the airbag firing and a more realistic loading of the vehicle crash structures in the FWDB configuration. Evaluations of the lower extremities have shown a general increasing of the tibia index with the crash pulse severity.
Established in 1997, the European New Car Assessment Programme (Euro NCAP) provides consumers with a safety performance assessment for the majority of the most popular cars in Europe. Thanks to its rigorous crash tests, Euro NCAP has rapidly become an important driver safety improvement to new cars. After ten years of rating vehicles, Euro NCAP felt that a change was necessary to stay in tune with rapidly emerging driver assistance and crash avoidance systems and to respond to shifting priorities in road safety. A new overall rating system was introduced that combines the most important aspects of vehicle safety under a single star rating. The overall rating system has allowed Euro NCAP to continue to push for better fitment and higher performance for vehicles sold on the European market. In the coming years, the safety rating is expected to play an important role in the support of the roll-out of highly automated vehicles.
Estimation of the effects of new emission standards on motorcycle emissions by means of modeling
(2016)
Road traffic is, in addition to the energy sector and the industry, one main source of air pollution and carbon dioxide emissions. Although most countries and manufacturers agreed to environmental regulations to reduce the pollutant emissions, particularly in urban areas with high traffic density, the impact of road traffic emissions on the environment and human health has been growing in importance steadily. Due to stricter emission standards and the binding use of emission-reducing systems (e.g. three-way catalyst) hydrocarbon emissions from passenger cars have been reduced significantly since the last two decades. Unlike to passenger cars the emissions standards of powered two-wheelers have not been adjusted since 2006 although their share of hydrocarbon emissions to the total amount of hydrocarbon emissions of road traffic is estimated to be disproportionately high. Due to the new regulation (EU) No. 168/2013 powered two-wheelers have to fulfill new emission standards from 2016 (Euro 4) and 2020 (Euro 5) onwards. Besides new limits for the tailpipe emissions the evaporative emissions are regulated separately for the first time, as they make up a high proportion to the total hydrocarbon emissions in this vehicle class. In this context, the calculation and forecast of road traffic emissions is an important tool to verify compliance of climate targets and to assess the reduction potential of emission-reducing systems. For that purpose the Federal Highway Research Institute (BASt) uses the emission- and calculation tool TREMOD (Transport Emission Model) which provides baseline data and calculated results for pollutants in almost every differentiation e.g. vehicle category, traffic situation and road type. Moreover, estimations of future emission trends, stock information and mileage distribution can be made. The main objective is to illustrate the impact of the upcoming emission standards Euro 4 and Euro 5 on the operational hydrocarbon emissions of powered two-wheelers based on statistical estimations. The significant aspect is to generate scenarios to show the reduction potential of hydrocarbon emissions of powered two-wheelers, differentiated into motorcycles and small motorcycles, in relation to the total share of hydrocarbon emissions in this vehicle class and to the total hydrocarbon emissions from road traffic. As a part of their research, the authors can make initial statements about the possible effect of the new emission standards of regulation (EU) No. 168/2013 by means of modeling with TREMOD.