91 Fahrzeugkonstruktion
Filtern
Erscheinungsjahr
Dokumenttyp
- Konferenzveröffentlichung (34)
- Buch (Monographie) (8)
- Wissenschaftlicher Artikel (1)
- Bericht (1)
Schlagworte
- Simulation (44) (entfernen)
Institut
For a number of EU regulatory acts Virtual Testing (VT) is already allowed for type approval (see Commission Regulation No. 371/2010 of 16 April 2010 amending the Framework Directive 2007/46/EC). However, only a very general procedure on how to apply VT for type approval is provided. Technical details for specific regulatory acts are not given yet. The main objective of the European project IMVITER (IMplementation of VIrtual TEsting in Safety Regulations) was to promote the implementation of VT in safety regulations. When proposing VT procedures the new regulation was taken into account, in particular, addressing open issues. Special attention was paid to pedestrian protection as pilot cases. A key aspect for VT implementation is to demonstrate that the employed simulation models are reliable. This paper describes how the Verification and Validation (V&V) method defined by the American Society of Mechanical Engineers was adapted for pedestrian protection VT based assessment. or the certification of headform impactors an extensive study was performed at two laboratories to assess the variability in calibration tests and equivalent results from a set of simulation models. Based on these results a methodology is defined for certification of headform impactor simulation models. A similar study was also performed with one vehicle in the type approval test setup. Its bonnet was highly instrumented and subjected to 45 impacts in five different positions at two laboratories in order to obtain an estimation of the variability in the physical tests. An equivalent study was performed using stochastic simulation with a metamodel fed with observed variability in impact conditions of physical headforms. An estimation of the test method uncertainty was obtained and used in the definition of a validation corridor for simulation models. Validation metric and criteria were defined in cooperation with the ISO TC22 SC10 and SC12 WG4 "Virtual Testing". A complete validation procedure including different test setups, physical magnitudes and evaluation criteria is provided. A detailed procedural flowchart is developed for VT implementation in EC Regulation No 78/2009 based on a so called "Hybrid VT" approach, which combines real hardware based head impact tests and simulations. This detailed flowchart is shown and explained within this paper. Another important point within the virtual testing based procedures is the documentation of relevant information resulting from the verification and validation process of the numerical models used. For this purpose report templates were developed within the project. The proposed procedure fixes minimum V&V requirements for numerical models to be confidently used within the type-approval process. It is not intended to be a thorough guide on how to build such reliable models. Different modeling methodologies are therefore possible, according to particular OEM know-how. These requirements respond to a balance amongst the type-approval stakeholders interests. A cost-benefit analysis, which was also performed within the IMVITER project, supports this approach, showing the conditions in which VT implementation is beneficial. Based on the experience gained in the project and the background of the experts involved an outlook is given as a roadmap of VT implementation, identifying the most important milestones to be reached along the way to a future vehicle type approval procedure supported by VT. The results presented in this paper show an important step addressing open questions and fostering the future acceptance of virtual testing in pedestrian protection type approval procedures.
Eine moderne Verkehrsinfrastruktur ist die Voraussetzung für Mobilität und wirtschaftliches Wachstum. Um in Zeiten der Globalisierung den Wirtschaftsstandort Deutschland zu sichern und auszubauen, gilt es, flexibel auf die sich rasant ändernden Rahmenbedingungen zu reagieren. Verkehr erzeugt jedoch Lärm, den die Bevölkerung mit steigender Sensibilität wahrnimmt. Leistung, Produktivität und Lebensqualität sind durch Lärm stark beeinträchtigt. Etwa 60 % der Bevölkerung in Deutschland fühlen sich durch den Straßenverkehrslärm belästigt. Die Auswirkungen des Lärms von der Beeinträchtigung der Konzentration und Kommunikation bis hin zur möglichen Schädigung der Gesundheit sind durch umfassende Studien des Umweltbundesamtes (UBA) belegt. Im Dezember 2009 wurde nach vier Jahren Forschungsarbeit das durch das Bundesministerium für Wirtschaft und Technologie (BMWi) geförderte Forschungsprojekt "Leiser Straßenverkehr 2" erfolgreich abgeschlossen. Insgesamt elf Partner aus Industrie und Forschung haben gemeinsam Lösungen erarbeitet, wie der Straßenverkehrslärm dauerhaft reduziert werden kann. Die Projektkosten wurden auf ca. 4,5 Mio. EUR veranschlagt und werden jeweils zu 50 % vom BMWi und den Forschungspartnern getragen. Der Bau der Erprobungsstrecken wird aus Baumitteln finanziert. Auf diese Weise unterstützt das Bundesministerium für Verkehr, Bau und Stadtentwicklung (BMVBS) das Projekt "Leiser Straßenverkehr 2". Einen Schwerpunkt des Projektes stellte die Entwicklung eines leiseren Lkw-Reifens für die Antriebsachse dar. In Zusammenarbeit mit dem Projektpartner Continental AG konnte im Frühjahr 2009 ein geräuschreduzierter Lkw-Reifen auf dem Markt eingeführt werden, der gegenüber dem Vorgängerprodukt um ca. 3,5 dB(A) leiser ist. Die Firma Continental AG plant, dieses neue leisere Reifenprofil auf andere Reifendimensionen zu übertragen. Darüber hinaus wurde von der Technischen Universität Hamburg-Harburg, der Leibniz Universität Hannover und der Firma Continental AG ein Berechnungsmodell zur detaillierten Simulation eines rollenden Reifens auf einer Fahrbahn, der daraus resultierenden Reifenschwingungen und der damit verbundenen Geräusche entwickelt. Erstmals steht ein derartiges Instrument für die Reifenoptimierung zur Verfügung. Eine weitere Schallreduktion wurde im Projekt angestrebt, indem die akustische Lebensdauer von offenporigen Asphalten durch Vermeidung der Verschmutzung verlängert wird. Um dies zu erreichen, wurde ein modifiziertes Bitumen entwickelt, mit dem die Schmutzanhaftung an den Hohlraumwandungen offenporiger Asphalte minimiert werden kann. Im Rahmen der Erprobung auf der Bundesautobahn A 24 bei Berlin wird derzeit geprüft, wie sich dieser modifizierte offenporige Asphalt in der Straßenbaupraxis bewährt. Darüber hinaus wurden von der Firma Müller BBM Resonatoren entwickelt, die in die offenporige Deckschicht integriert werden und aufgrund ihrer speziellen Frequenzabstimmung ein breiteres Frequenzband zur Schallreduzierung abdecken sollen. Im Juli 2009 erfolgte in einem Testabschnitt auf der Erprobungsstrecke A 24 die bautechnische Umsetzung der Ergebnisse in die Praxis. Ein weiterer Schwerpunkt im Projekt war die akustische Optimierung von Lamellen-Fahrbahnübergängen für lange Brücken. Umfangreiche Untersuchungen wurden dabei im Prüfstand Fahrzeug/Fahrbahn der BASt durchgeführt. Im Juli 2009 wurden die neuen lärmarmen Oberflächen auf einem Fahrbahnübergang auf der A 10 bei Phoeben/Havelbrücke eingebaut und zeigten im Vergleich zum Lamellen-Fahrbahnübergang ohne Rautenelemente eine lärmreduzierende Wirkung von ca. 5 dB(A). Insgesamt zeigen die Forschungsergebnisse Entwicklungspotenziale zur weiteren Schallreduktion auf. Ein zentrales Ziel weiterführender Forschungskonzepte wird es sein, neuartige lärmarme Fahrbahnbeläge zu entwickeln und technische Lösungen für die Anwendung in der Straßenbaupraxis zu finden. Darüber hinaus sollen die Simulationsmodelle erweitert und optimiert werden, damit unter Berücksichtigung verschiedener Einflüsse aus Reifen und Fahrbahn Geräuschprognosen schnell und zuverlässig möglich sind.
The project UR:BAN "Cognitive assistance (KA)" aims at developing future assistance systems providing improved performance in complex city traffic. New state-of-the-art panoramic sensor technologies now allow comprehensive monitoring and evaluation of the vehicle environment. In order to improve protection of vulnerable road users such as pedestrians and cyclists, a particular objective of UR:BAN is the evaluation and prediction of their behaviour and actions. The objective of subproject "WER" is development support by providing quantitative estimates of traffic collisions at the very start and predict potential in terms of optimized accident avoidance and reduction of injury severity. For this purpose an integrated computer simulation toolkit is being devised based on real world accidents (GIDAS as well as video documented accidents), allowing the prediction of potential effectiveness and future benefit of assistance systems in this accident scenario. Subsequently, this toolkit may be used for optimizing the design of implemented assistance systems for improved effectiveness.
Der vorliegende Bericht befasst sich mit den Auswirkungen von teilasphärischen Außenspiegeln von Kraftfahrzeugen auf das Unfallgeschehen. Es wird untersucht, ob die Vorteile teilasphärischer Spiegel (größeres Sichtfeld, Reduzierung des "toten Winkels") mit Nachteilen durch die optisch bedingten Verzerrungen des Spiegels verbunden sind (zum Beispiel fehlerhafte Distanz- oder Geschwindigkeitsschätzungen). Hierzu wird ein mehrstufiges Vorgehen gewählt, dass aus der Bestimmung des derzeitigen Ausrüstungsstands, einer Zusammenstellung und vergleichenden Betrachtung nationaler und internationaler Richtlinien und einer umfangreichen Literaturrecherche zur bisherigen Spiegelforschung besteht. Auf der Grundlage dieser Informationen wird der aktuelle Wissensstand zur seitlichen und rückwärtigen Sicht aus Kraftfahrzeugen unter besonderer Berücksichtigung der verschiedenen Arten von Außenspiegeln (plan, sphärisch konvex und teilasphärisch) ermittelt und systematisiert. Ergänzend wird im Rahmen von Unfallanalysen untersucht, ob die Verwendung neuartiger Spiegelsysteme einen messbaren Einfluss auf die Unfallstatistik hat. Besondere Relevanz haben in diesem Zusammenhang Unfälle bei AbbiegevorgÃ-¤ngen und Fahrspurwechseln, also Unfalltypen, bei denen der so genannte "tote Winkel" eine maßgebliche Rolle spielen könnte. Zusätzlich wird die Verwendung unterschiedlicher Spiegelsysteme und der Stand der Technik in der derzeitigen Fahrzeugpopulation ermittelt und eine Prognose für die weitere Entwicklung erarbeitet. Diese Erhebungen dienen als Basis für die Durchführung von drei Experimenten, die Informationen zum Einfluss teilasphärischer Spiegel auf die Wahrnehmung liefern sollen. Experiment 1 beschäftigt sich mit Distanzschätzungen durch plane, sphärische und teilasphärische Spiegel. Experiment 2 untersucht die Fähigkeit von Versuchspersonen, mit Hilfe eines planen, sphärischen oder teilasphärischen Außenspiegels die Distanz- und Geschwindigkeit eines sich nähernden Fahrzeugs einzuschätzen und so den Kollisionszeitpunkt zu bestimmen. Während die ersten beiden Experimente eher Nachteile teilasphärischer Spiegel zu entdecken versuchen, widmet sich Experiment 3 explizit der Frage nach den Vorteilen dieser Spiegel. Es wird daher untersucht, ob das größere Sichtfeld trotz optischer Verzerrungen genutzt werden kann und sich somit Fehleinschätzungen bei der Objekterkennung im "toten Winkel" signifikant reduzieren lassen. Die Experimente können keine Belege für sicherheitsrelevante Nachteile teilasphÃ-¤rischer Außenspiegel finden, sie zeigen jedoch, dass ein größeres, rückwärtiges Sichtfeld genutzt werden kann. Die EinfÃ-¼hrung teilasphärischer Außenspiegel wird daher befürwortet und es wird erwartet, dass diese positive Auswirkungen auf das Unfallgeschehen haben werden.
A biofidelic flexible pedestrian legform impactor (FlexPLI) has been developed from the year 2000 onwards and evaluated by a technical evaluation group (Flex-TEG) of UN-ECE GRSP. A recently established UN-ECE GRSP Informal Group on GTR9 Phase 2 is aiming at introducing the FlexPLI within world-wide regulations on pedestrian safety (Phase 2 of GTR No. 9 as well as the new UN regulation 127 on pedestrian safety) as a test tool for the assessment of lower extremity injuries in lateral vehicle-to-pedestrian accidents. Besides, the FlexPLI has already been introduced within JNCAP and is on the Euro NCAP roadmap for 2014. Despite of the biofidelic properties in the knee and tibia sections, several open issues related to the FlexPLI, like the estimation of the cost benefit, the feasibility of vehicle compliance with the threshold values, the robustness of the impactor and of the test results, the comparability between prototype and production level and the finalization of certification corridors still needed to be solved. Furthermore, discussions with stakeholders about a harmonized lower legform to bumper test area are still going on. This paper describes several studies carried out by the Federal Highway Research Institute (BASt) regarding the benefit due to the introduction of the FlexPLI within legislation for type approval, the robustness of test results, the establishment of new assembly certification corridors and a proposal for a harmonized legform to bumper test area. Furthermore, a report on vehicle tests that previously had been carried out with three prototype legforms and were now being repeated using legforms with serial production status, is given. Finally, the paper gives a status report on the ongoing simulation and testing activities with respect to the development and evaluation of an improved test procedure with upper body mass for assessing pedestrian femur injuries.
The evaluation of the expected benefit of active safety systems or even ideas of future systems is challenging because this has to be done prospectively. Beside acceptance, the predicted real-world benefit of active safety systems is one of the most important and interesting measures. Therefore, appropriate methods should be used that meet the requirements concerning representativeness, robustness and accuracy. The paper presents the development of a methodology for the assessment of current and future vehicle safety systems. The variety of systems requires several tools and methods and thus, a common tool box was created. This toolbox consists of different levels, regarding different aspects like data sources, scenarios, representativeness, measures like pre-crash-simulations, automated crash computation, single-case-analyses or driving simulator studies. Finally, the benefit of the system(s) is calculated, e.g. by using injury risk functions; giving the number of avoided/mitigated accidents, the reduction of injured or killed persons or the decrease of economic costs.
In road traffic accidents, a car-seat and its occupant can be subjected to various crash pulses in the case of a rear impact. This study investigates the influence of crash pulse shape on seat-occupant response and evaluates the corresponding risk of whiplash injury. For this purpose, a rigorously validated seat-occupant system model is used to study different carseat designs and crash pulses. Two different car-seat concepts are also presented which can effectively mitigate whiplash injury for a wide range of crash severity. It is shown that for crash pulses of similar severity, the level of whiplash-risk depends strongly on the combined effects of seat design and crash pulse shape.
Since its creation in 2011 the Pre-Crash-Matrix (PCM) offers the possibility to observe the pre-crash phase until five seconds before crash for a wide range of accidents. Currently the PCM contains more than 8.000 reconstructed accidents out of the GIDAS (German In-Depth Accident Study) database and is enlarged continuously by more than 1.000 cases per year. Hence, a detailed investigation of active safety systems in real accident situations has been made feasible. The PCM contains all relevant data in database format to simulate the pre-crash phase until the first collision of the accident for a maximum of two participants. This includes the definition of the participants and their characteristics, the dynamic behavior of the participants as time-dependent course for five seconds before crash as well as the geometry of the traffic infrastructure. The digital sketch of the accident and information from GIDAS as well as from supplementary databases represent the main input for the simulation of the pre-crash phase of an accident with the VUFO simulation model VAST (Vufo Accident Simulation Tool). This simulation in turn embodies the foundation of the PCM. The PCM underlies continual improvements and enhancements in consultation with its users. In addition to collisions of cars with other cars, pedestrians, bicycles and motorcycles the PCM now also covers car to object and car to truck collisions. The paper illustrates car to truck collisions as a showcase and explains perspectives for further developments. In 2016 a more detailed definition of the contour of the vehicle was added. Furthermore, the geometrical surroundings of the accident site will be provided in a new structure with a higher level of detail. Thus, a precise classification of road marks and objects is possible to further improve the support of developing and evaluating ADAS. This paper gives an overview about the latest developments of the PCM with its innovations and provides an outlook to upcoming enhancements. Besides potential areas of application for the development of ADAS are shown.
This study is aimed to investigate the correlations of impact conditions and dynamic responses with the injuries and injury severity of child pedestrians by accident reconstruction. For this purpose, the pedestrian accident cases were selected from Sweden and Germany with detailed information about injuries, accident cars, and accident environment. The selected accident cases were reconstructed using mathematical models of pedestrian and passenger car. The pedestrian models were generated based on the height, weight, and age of the pedestrian involved in accidents. The car models were built up based on the corresponding accident car. The impact speeds in simulations were defined based on the reported data. The calculated physical quantities were analyzed to find the correlation with injury outcomes registered in the accident database. The reconstruction approaches are discussed in terms of data collection, estimating vehicle impact speeds, pedestrian moving speeds and initial posture, secondary ground impact, validity of the mathematical models, as well as impact biomechanics.
Impact severity is a fundamental measure for all in-depth crash investigation projects. One methodology used in the UK is based on the US Calspan software package CRASH3. The UK- in-depth crash investigation studies routinely use AiDamage3 a software package which is based on an updated version of the original CRASH3 algorithm, including enhancements to the vehicle stiffness coefficients. Real world accident-damaged vehicles are measured and their crush is correlated with a library of stiffness coefficients. These measurements are then used, along with other parameters, to calculate the crash energy and equivalent changes of velocity of the vehicles (delta-v), which is a measure of the impact severity. UK in-depth accident studies routinely validate the crash severity methodologies applied as the vehicle fleet changes. This is achieved by analysing crash test data and using the appropriate residual crush damage and other inputs to AiDamage3 and checking the program- outputs with the known crash severity parameters. This procedure checks, at least in part, the default stiffness values in the data libraries and the reconstruction methods used.
The sequence of accident events can be classified by three essential phases, the pre-crash-sequence, the crash-sequence and the post-crash-sequence. The level of reliability of the information in the GIDAS-database (German In Depth Accident Study) is provided predominantly on the passive side. The period to evaluate active safety systems begins already in the pre-crash-sequence. The assessment of the potential of sensor- or communication-based active safety systems can only be accomplished by a detailed analysis of the pre-crash-phase. Hence the necessity to analyze the early period of the accident event in detail arises. This is possible with the help of the digital sketches of the accident site and the simulation of the accident by a simulation method of the VUFO GmbH. After simulating the pre-crash scenario it is possible to generate additional and standardized data to describe the pre-crash-sequences of an accident in a very high detail. These data are documented in a second database called the GIDAS Pre-Crash-Matrix (PCM). The PCM contains various tables with all relevant data to reproduce the pre-crash-sequence of traffic accidents from the GIDAS database until 5 seconds before the first collision. This includes parameters to describe the environment data, participant data and motion or dynamic data. This paper explains the creation of the PCM, the simulation itself and the contents and structure of the PCM. With this information of the pre-crash-sequence for various accident scenarios an improved benefit estimation and development of active safety systems can be made possible.
The focus of the technical innovation in the automobile industry is currently changing to sensor based safety systems, which are operating in the pre-crash phase of an accident. To get more information about this pre-crash phase for real accidents a simulation of this phase using the GIDAS database is done. The basics for this simulation are geometrical information about the accident location and the exact accident data out of the GIDAS database. This aggregated information gives the possibility to simulate an exact motion for every accident participant, using MATLAB / SIMULINK, in the pre-crash phase. After the simulation the information about the geometrical positions, the velocities and maneuvers of the drivers to an individual TTC (time to collision) are available. With those results it is possible to develop new useful sensor geometries using pre-crash scatter plots or estimate the efficiency of implemented active safety systems in combination with sensor characteristics. This simulation can be done for every reconstructed accident included in the GIDAS database, so these results can represent a wide spread basis for the further development of active safety systems and sensor geometries and characteristics
Neben der zunehmenden Bedeutung der aktiven Sicherheit bleiben Maßnahmen der passiven Sicherheit bei der Entwicklung moderner Kraftfahrzeuge unabdingbar. Die Weiterentwicklung von Maßnahmen zum passiven Fußgängerschutz war zunächst größtenteils durch Verbraucherschutztests wie zum Beispiel Euro NCAP oder JNCAP getrieben und ist nun auch durch gesetzliche Regelungen verpflichtend geworden. Im vorangegangenen Forschungsprojekt der BASt FE 82.229/2002 Schutz von Fußgängern beim Scheibenaufprall ist die Grundlage eines modularen Prüfverfahrens für den Kopfaufprall im Bereich der Windschutzscheibe, bestehend aus einem Versuchs- und einem Simulationsteil, erarbeitet worden. Im Rahmen dieses Projektes wurde ein hybrides Testverfahren bestehend aus Versuch und Simulation ausgearbeitet, das den Bereich der Windschutzscheibe und dabei auch crashaktive Systeme wie Airbags berücksichtigt. Das Testverfahren kombiniert Komponentenversuche mit einem Simulationsteil, in dem Fahrzeug-Fußgänger-Simulationen und lmpaktorsimulationen durchgeführt werden. Zusätzliche Dummyversuche dienten zur Bewertung des Testverfahrens. Alle erarbeiteten virtuellen und realen Testmethoden wurden an einem Referenzfahrzeug (Opel Signum), welches repräsentativ für eine durchschnittliche Mittelklasselimousine steht, durchgeführt. Das Fahrzeug wurde mit einem Airbagsystem ausgerüstet und der Testprozedur mit und ohne diesem System vergleichend unterzogen. Innerhalb dieser Untersuchungen konnte gezeigt werden, dass neue Testmethoden unter Ausnutzung von Simulationen und Komponententests es erlauben, realistischere Versuchsbedingungen unter Berücksichtigung von potenziellen Kopfaufprallpositionen und -zeiten zu definieren. Dabei können sehr gute Übereinstimmungen zwischen Fußgängersimulation und Dummyversuch erreicht werden. Die Randbedingungen für den Kopfaufprall und die Aufprallzeit wurden durch den Einsatz von Fußgängermodellen ermittelt. Weiterhin ermöglichen die Simulationen, zusätzliche Einflussdaten wie Vektoren mit den Kopfaufprallgeschwindigkeiten und -winkeln zu bestimmen.
Test and assessment procedures for passive pedestrian protection based on developments by the European Enhanced Vehicle-safety Committee (EEVC) have been introduced in world-wide regulations and consumer test programmes, with considerable harmonization between these programmes. Nevertheless, latest accident investigations reveal a stagnation of pedestrian fatality numbers on European roads running the risk of not meeting the European Union- goal of halving the number of road fatalities by the year 2020. The branch of external road user safety within the EC-funded research project SENIORS under the HORIZON 2020 framework programme focuses on investigating the benefit of modifications to pedestrian test and assessment procedures and their impactors for vulnerable road users with focus on the elderly. Injury patterns of pedestrians and cyclists derived from the German In-Depth Accident Study (GIDAS) show a trend of AIS 2+ and AIS 3+ injuries getting more relevant for the thorax region in crashes with newer cars (Wisch et al., 2017), while maintaining the relevance for head and lower extremities. Several crash databases from Europe such as GIDAS and the Swedish Traffic Accident Data Acquisition (STRADA) also show that head, thorax and lower extremities are the key affected body regions not only for the average population but in particular for the elderly. Therefore, the SENIORS project is focusing on an improvement of currently available impactors and procedures in terms of biofidelity and injury assessment ability towards a better protection of the affected body regions, incorporating previous results from FP 6 project APROSYS and subsequent studies carried out by BASt. The paper describes the overall methodology to develop revised FE impactor models. Matched human body model and impactor simulations against generic test rigs provide transfer functions that will be used for the derivation of impactor criteria from human injury risk functions for the affected body regions. In a later step, the refined impactors will be validated by simulations against actual vehicle front-ends. Prototyping and adaptation of test and assessment procedures as well as an impact assessment will conclude the work of the project at the final stage. The work will contribute to an improved protection of vulnerable road users focusing on the elderly. The use of advanced human body models to develop applicable assessment criteria for the revised impactors is intended to cope with the paucity of actual biomechanical data focusing on elderly pedestrians. In order to achieve optimized results in the future, the improved test methods need to be implemented within an integrated approach, combining active with passive safety measures. In order to address the developments in road accidents and injury patterns of vulnerable road users, established test and assessment procedures need to be continuously verified and, where needed, to be revised. The demographic change as well as changes in the vehicle fleet, leading to a variation of accident scenarios, injury frequencies and injury patterns of vulnerable road users are addressed by the work provided by the SENIORS project, introducing updated impactors for pedestrian test and assessment procedures.
Das Fahrzeugsegment der leichten Nutzfahrzeuge (LNF) hat in den vergangenen Jahren in Deutschland stark an Bedeutung gewonnen. Der Bestand ist im Jahr 2014 auf rund 2,1 Mio. Fahrzeuge angewachsen " das entspricht einem Wachstum von +133 % gegenüber 1990. Die Fahrleistungen der LNF haben nach den Annahmen für TREMOD im gleichen Zeitraum sogar um +170 % zugenommen. Die zunehmende Bedeutung der LNF sowie die heutige Vielfalt der Einsatzzwecke spiegeln sich in der Modellierung der Emissionen von LNF in Deutschland zum Teil nicht wieder. Die Datengrundlagen für das Verkehrsemissionsmodell TREMOD (Transport Emission Model) sowie für das Handbuch für Emissionsfaktoren des Straßenverkehrs (HBEFA) sind teilweise mehr als 20 Jahre alt. Die Aufteilung der Fahrleistung nach Verkehrssituationen und Längsneigungsklassen geht beispielsweise auf eine Analyse von HEUSCH/BOESEFELDT aus dem Jahr 1996 zurück. Die Fahrzyklen, die den Verkehrssituationen und damit auch den Emissionsfaktoren zugrunde liegen, basieren gerade für leichte Nutzfahrzeuge auf wenigen Daten oder sind von Pkw abgeleitet. Zudem stehen nur eine beschränkte Anzahl von Emissionsmessungen für LNF zur Verfügung, auf deren Basis die Emissionsfaktoren für HBEFA abgeleitet werden. Die Gesamtfahrleistung (Inlandsfahrleistung) der LNF in TREMOD basiert im Wesentlichen noch auf der Fahrleistungserhebung (FLE) 2002. Die Inlandsfahrleistung der LNF war hierbei etwa gleich hoch wie die Inländerfahrleistung. Jedoch wurde nur ca. die Hälfte der Fahrleistungen auf den freien Strecken gemäß Straßenverkehrszählung der BASt erfasst und die Differenz den Innerorts- und Gemeindestraßen in TREMOD zugeordnet. Die Fortschreibung der Fahrleistungen von 2002 bis 2014 erfolgte u.a. über die Straßenverkehrszählungen und die Bestandsentwicklung. Auswertungen der (bei Berichtslegung noch nicht definitiv vorliegenden) Fahrleistungserhebung 2014 müssen zeigen, ob die angenommenen Entwicklungen der Gesamtfahrleistung der LNF sowie pro Straßenkategorie plausibel sind. Vorläufige Ergebnisse der FLE 2014 zeigen deutlich höhere LNF-Inlandsfahrleistungen als aktuell in TREMOD hinterlegt. Eine Detailanalyse und Interpretation der Ergebnisse konnte aber im Rahmen dieses Projektes noch nicht erfolgen. Neben den bisher in TREMOD verwendeten Quellen wurden weitere Fahrleistungsdaten untersucht. Für das Jahr 2013 veröffentlichte das Kraftfahrtbundesamt (KBA) erstmals Inländerfahrleistungen je Fahrzeugkategorie und Fahrzeugalter, basierend auf Tachostandinformationen von 26,5 Mio. deutschen Kraftfahrzeugen. Es wird empfohlen die Fahrleistungsstatistik vom KBA in zukünftige TREMOD-Aktualisierungen einzubeziehen. Für die Herleitung der in HBEFA den LNF zugrunde gelegten Fahrmustern wurde bislang nicht nach Pkw und LNF unterschieden. Vergleiche der verfügbaren LNF- und Pkw-Fahrmuster bezüglich der Geschwindigkeit und der Wegedauer zeigen leichte Abweichungen in der Form, dass LNF tendenziell öfter mit geringeren Geschwindigkeiten und kürzerer Wegedauer unterwegs sind als Pkw. Die Unterschiede sind jedoch durchwegs gering. Es können auf der Basis der verfügbaren Datengrundlagen keine eigenständigen LNF-Fahrzyklen abgeleitet werden. Die Emissionsfaktoren in HBEFA werden über das Simulationsmodell PHEM der FVT-TU Graz generiert. Aufgrund der unzureichenden Datenlage konnten bisher für PHEM keine LNF-spezifischen Emissionskennfelder verwendet werden, d.h. es wurden modifizierte Pkw-Kennfelder für die Modellierung der Emissionsfaktoren verwendet. Mittlerweile stehen weitere LNF-Messungen für die Herleitung von Emissionskennfeldern zur Verfügung. Für die hinsichtlich der heutigen Fahrleistungen relevanten LNF-Fahrzeugschicht (N1-III-Diesel-Euro-5) liegen beispielsweise aktuell 10 zeitlich hochaufgelöste Emissionsmessungen vor, welche bei der nächsten Aktualisierung von HBEFA genutzt werden können.
The presentation deals with the simulation tool rateEFFECT which intends to answer the following questions: Which active safety systems should be developed to maximize safety benefit in real traffic accidents? What is the effectiveness of a specific active safety system in the real world? How many casualties could be avoided by such a system? It is shown that a lot of information is required to simulate existing accidents in order to estimate ADAS effects. This particularly includes numerical values for the pre-crash and in-crash phase. The database GIDAS provides a required minimum number of these parameters for a statistically significant sample.
Das Ziel des Forschungsprojekts "Quantifizierung der Passiven Sicherheit für Pkw-Insassen" besteht darin, Messergebnisse in Form von Dummybelastungswerten zu einem Sicherheitsindex zu verdichten. Zur Formulierung des dazu erforderlichen Bewertungsalgorithmus wurden folgende Zusammenhänge erarbeitet: 1. Beziehung zwischen Verletzungsschwere und Dummybelastungsgröße für relevante Körperteile, 2. Relevanzfaktoren zur Wichtung der Teilergebnisse und 3. Zusammenhang zwischen körperteilspezifischen Schutzkriterien und dem entsprechenden Erfüllungsgrad. Die wesentliche Aufmerksamkeit erforderte die Bereitstellung der Relevanzstruktur, da mit den einzelnen Relevanzfaktoren die gemessenen Belastungen entsprechend der Bedeutung der im realen Unfallgeschehen beobachteten Verletzungen bewertet werden sollten. Im Bereich der experimentellen Simulation lag das Hauptaugenmerk auf der Bereitstellung der Versuchsbedingungen, wobei die gesetzlich vorgeschriebenen Sicherheitsversuche zu berücksichtigen waren. Daraus ergab sich die Festlegung auf folgende Versuchskonstellationen: 1. Frontaler Wandaufprall, 2. Seitenaufprall einer fahrbaren Barriere auf den stehenden Pkw und 3. Kompatibilitätsversuch, bei dem ein Fahrzeug seitlich mit einem anderen Fahrzeug gleichen Typs kollidiert. Mit Hilfe eines erarbeiteten Bewertungsalgorithmus werden die versuchstechnisch gemessenen Belastungswerte normiert und der Bewertungsfunktion zugeführt. Die so ermittelten Erfüllungsgrade erhalten durch die Relevanzfaktoren eine unfallspezifische Wichtung und lassen sich über Teilsicherheitsindizes zu einem Gesamt-Sicherheitsindex zusammenfassen. Dieser Sicherheitsindex soll Aufschluss über das Niveau der inneren Sicherheit von Pkw geben.
Für eine Reihe von EU Regelungen im Bereich Fahrzeugsicherheit erlaubt eine Verordnung bereits seit dem Jahr 2010 virtuelles Testen für die Typzulassungsprüfung. Technische Details bzw. konkrete Prozeduren für spezifische Regelungen sind in dieser Verordnung jedoch nicht enthalten. Das Hauptziel des europäischen Projekts IMVITER (lmplementation of Virtual Testing in Safety Regulations) war es, basierend auf der neuen Verordnung ein virtuelles Testverfahren auszuarbeiten und dabei offene Fragen zu berücksichtigen. Um die im Projekt-Konsortium unter Berücksichtigung der Anliegen aller Interessensgruppen wie Autohersteller, Zulassungsbehörden und technischer Dienste erarbeiteten offenen Punkte zu adressieren, wurde ein generisches Flussdiagramm entwickelt, das den Ablauf einer virtuell basierten Typprüfung darstellt. ln diesem Diagramm ist der virtuelle Typgenehmigungsprozess in drei aufeinander folgende Phasen aufgeteilt, die Verifikations-, Validierungs- und Typgenehmigungsphase. Von entscheidender Bedeutung ist die Phase der Validierung des Simulationsmodells, für die im IMVITER-Projekt eine Methodik vorgeschlagen wurde. Mit der im Projekt vorgeschlagenen Validierungsmethode ist kein Austausch des Simulationsmodells zwischen Fahrzeughersteller und technischem Dienst notwendig, so dass die Vertraulichkeit von Betriebsgeheimnissen nicht gefährdet ist. Zur Validierung des Modells werden jedoch immer Versuche notwendig sein. Dies gilt sowohl für die Überpruefung von passiven als auch aktiven Fahrzeugsicherheitssystemen. Eine zusammenfassende Betrachtung der Erfahrungen aus dem IMVITER-Projekt ergab, dass mit der Einführung von virtuellem Testen keine Erhöhung der Anforderungen an die Fahrzeugsicherheit bzgl. bestehender Regelungen verbunden sein sollte. Jedoch werden auch weiterhin neue zusäztliche Regelungen erforderlich sein, da sich das Unfallgeschehen und die Fahrzeugtechnologie weiterentwickeln und ändern werden. Diese sollten von Beginn an die Möglichkeiten des virtuellen Testens nutzen, insbesondere bei Testverfahren für neue Technologien, z.B. aktiver Fahrzeugsicherheitssysteme. Hier bieten virtuelle Testverfahren nicht nur eine Kosten- oder Zeitersparnis, sondern ermöglichen teilweise erst die sinnvolle Abprüfung von neuen Sicherheitssystemen, die mit aktuellen auf Hardware-Test basierenden Verfahren überhaupt nicht möglich wären.
Abstract: Für Kinder in Deutschland existiert im Pkw weiterhin ein höheres Risiko, im Straßenverkehr bei einem Unfall schwer verletzt oder getötet zu werden, als es für ungeschützte Verkehrsteilnehmer wie Fahrradfahrer oder Fußgänger besteht. Dies erscheint auf den ersten Blick nicht nachvollziehbar, da der Pkw und die vorgeschriebenen Kindersitze den Kindern eine hohe Sicherheit bieten müssten. Der vorliegende Projektbericht gibt Aufschluss über den aktuellen Stand der Sicherheit von Kindern im Pkw in Deutschland und zeigt Optimierungspotenzial auf. Die Schutzwirkung der Kindersitze hängt von mehreren Faktoren ab. Dabei stehen technische Aspekte, die hier detailliert untersucht wurden, im Vordergrund. Doch vor allem in den letzten Jahren zeigte sich immer wieder in Feldstudien, aber auch in der Unfallanalyse, dass Kinderschutzsysteme (KSS) oftmals nicht nach den Vorgaben installiert wurden. Wenn der Kindersitz und/oder das Kind nicht entsprechend der Bedienungsanleitung gesichert werden, kann sich das Schutzpotenzial der KSS reduzieren und gegen Null gehen. Im schlimmsten Fall stellt eine fehlerhafte Benutzung von KSS eine Gefahr sowohl für das Kind als auch für andere Pkw-Insassen dar. Die Unfallanalyse ergab keine Aussage darüber, ob verschiedene KSS-Modelle zu unterschiedlichen Verletzungsmustern führen, da die Unfallkonstellationen pro KSS-Modell zu verschieden waren. Des Weiteren wurde analysiert, inwieweit heutige Testverfahren mit diesen Konstellationen übereinstimmen. Das Ziel, mit wenigen Verfahren möglichst alle relevanten Unfälle abzubilden, wurde zum Teil ereicht. Zu viele Testverfahren mit unterschiedlichen Bewertungssystemen stellen heutzutage die Endverbraucher vor das Problem, dass nicht klar ist, welches KSS wirklich das beste ist. In der Realität hängt die Schutzwirkung zudem noch wesentlich von der KSS-Pkw-Kombination ab, die nur annähernd durch Versuche überprüft werden kann, da sich eine zu hohe Anzahl von Kombinationsmöglichkeiten ergibt. Anhand von mehr als 100 Versuchen wurde das Schutzpotenzial von verschiedenen aktuellen Kindersitzmodellen untersucht. Dabei wurden immer vermeintlich gute und schlechte KSS gegenübergestellt und unter gleichen Randbedingungen getestet. Ziel dieses Vorgehens war es, anhand der Messergebnisse Maßnahmen zu erkennen, die dem Schutz der Kinder dienlich sind. Zusammenfassend kann gesagt werden, dass prinzipiell für Kinder ein gutes Schutzniveau durch KSS besteht, was aber von KSS zu KSS verschieden sein kann. Die teureren KSS wiesen keine mechanische Zerstörung auf und überstanden alle Tests ohne ernsthafte Beschädigungen. Lediglich das oftmals als Dämpfungsmaterial eingesetzte Polystyrol nahm Energie auf und verformte sich wie vorgesehen plastisch. Bei den "Billig-Kindersitzen" ergab sich leider ein komplett anderes Bild. Sobald die Anforderungen über die der Gesetzgebung hinausgehen, ist immer weniger Schutz für die Kinder vorhanden. Besonders im Seitenaufprall offenbarten sich erhebliche Lücken in der Sicherheit. Dies reichte von mechanischem Versagen mancher Plastikteile bis hin zu konstruktiven Unzulänglichkeiten. Vor allem die Gurtführung muss deutlicher gekennzeichnet und mechanisch verstärkt werden. Trotz des hohen Schutzpotenzials einiger Kindersitze ist das Ende der Entwicklung noch nicht abzusehen. In allen Kindersitzklassen ist es prinzipiell möglich, die Belastungswerte weiter zu reduzieren. Dazu werden am Ende des Berichtes verschiedene Möglichkeiten aufgezeigt. Zum einen ist dies eine optimierte Babyschale, die durch eine Trägheitsbewegung gezielt Energie abbaut und das Baby in eine günstigere Position bringt, in der die Belastungen des Körpers reduziert sind. Zum anderen wird gezeigt, dass durch die feste Anbindung des KSS an den Pkw und die Reduzierung der Rotation um die Y-Achse die Belastungen für Kinder reduziert werden können. Größtes Entwicklungspotenzial bietet dabei das ISOFIX-System. Es ist bekannt, dass ISOFIX die Fehlbedienung des Kindersitzes und die Belastungen der Kinder deutlich reduzieren kann. Trotzdem ist die bisherige Marktdurchdringung von ISOFIX eher gering. Obwohl insgesamt ein positives Fazit gezogen werden kann, darf nicht aufgehört werden, die Kindersicherheit weiter zu verbessern. Denn nicht alle Kindersitze schützen heute gleich gut. Einige genügen lediglich den Gesetzesansprüchen und finden in vielen Fällen durch einen sehr geringen Verkaufspreis Zugang in die Pkw. Durch verschärfte Testbedingungen sollten diese Kindersitze abgeschafft und der Weg für neue und bessere Kinderschutzsysteme frei gemacht werden.
The head impact of pedestrians in the windscreen area shows a high relevance in real-world accidents. Nevertheless, there are neither biomechanical limits nor elaborated testing procedures available. Furthermore, the development of deployable protection systems like pop-up bonnets or external airbags has made faster progress than the corresponding testing methods. New requirements which are currently not considered are taken into account within a research project of BASt and the EC funded APROSYS (Advanced PROtection SYStems) integrated project relating to passive pedestrian protection. Testing procedures for head impact in the windscreen area should address these new boundary conditions. The presented modular procedure combines the advantages of virtual testing, including full-scale multi-body and finite element simulations, as well as hardware testing containing impactor tests based on the existing procedures of EEVC WG 17. To meet the efforts of harmonization in legislation, it refers to the Global Technical Regulation of UNECE (GTR No. 9). The basis for this combined hardware and virtual testing procedure is a robust categorization covering all passenger cars and light commercial vehicles and defining the testing zone including the related kinematics. The virtual testing part supports also the choice of the impact points for the hardware test and determines head impact timing for testing deployable systems. The assessment of the neck rotation angle and sharp edge contact in the rear gap of pop-up bonnets is included. For the demonstration of this procedure, a hardware sedan shaped vehicle was modified by integrating an airbag system. In addition, tests with the Honda Polar-II Dummy were performed for an evaluation of the new testing procedure. Comparing these results, it was concluded that a combination of simulation and updated subsystem tests forms an important step towards enhanced future pedestrian safety systems considering the windscreen area and the deployable systems.
Motorcycle safety research
(2007)
Honda- global motorcycle sales exceeded the 10 million units mark since 2004, and further expansion is expected. As a responsibility for a company to provide mobility, Honda is focusing on motorcycle safety as top priority and has been working on various activities for both aspects of hardware and software. Here, we present Honda- activity for the safety technology of motorcycles. At present, Honda is promoting motorcycle safety in the four themes of prevention and collision safety such as safety education, recognition assistance, accident prevention and injury reduction. First, in the area of the safety education, the "Honda Safety Driving Promotion Center" was established in 1970, and motorcycle riders and vehicle driver trainings have been organized, and the traffic training centers are used as an actual practice field not only in Japan but also in many other regions in the world. Through our training activities, the new area of safety training with hardware assistance was developed and Honda- unique technology was accumulated such as the riding simulator which can provide experience of potentially dangerous situations without risk. Especially, the "riding trainer", the popular version of the riding simulator, was introduced at several motor shows in various countries and launched in September 2005. It was distributed first in Europe and is expected to expand globally aiming at 3000 units worldwide.. And in Europe, the newest version, which includes the suburban roads program, jointly developed with ADAC, will be released in near future. In the area of recognition assistance, "vehicle to vehicle communication technology" is under development using the advantage of being a manufacturer of both motorcycles and cars. This technology is under research as Honda "ASV-3" in Japan, and as part of C2C activity in Europe. As for the accident prevention, advanced brake systems for motorcycles to assist more effective brake operation have been expanded, Honda signed the European Road Safety Charter in April 2004 with the advanced brake systems commitment and furthermore, they are expanding according to vehicle characteristics and region. Then all models above 250 cc will have a version of the system by 2010. And as the last theme, "motorcycle airbag system" is introduced which is equipped on a mass production motorcycle for the first time in the world. It has been researched and developed for a long time as an injury reduction technology for collision accidents. Honda automobile technology was used for the research and development of the motorcycle airbag, and many specific issues such as the analysis of the collision conditions particular to motorcycles have been solved to realize today- success. It might be known that ADAC in-house crash test held in August this year confirmed the high effectiveness of the airbag system and showed a positive result. This motorcycle airbag system is equipped to the Honda Gold Wing and launched in North America in August, 2006. Also in Europe, it will be sold by the end of this year. Each theme of Honda motorcycle safety technology can be seen at the Honda booth.
This work describes the results of the experimental activity, illustrating the driving behavior observed in different conditions, relating them to the different methods of ADAS intervention and comparing the driver behavior without ADAS. In the present study, driver behavior was studied in road accidents involving elderly pedestrians, with different ADAS HMIs, as a base to develop a driver model in near missing pedestrian accidents. A literature research was conducted with the aim of finding out the main influencing factors, including environment, boundary conditions, configuration of impact, pedestrian and driver information, when pedestrian fatalities occur and an analysis of frequent road accidents was conducted to get more detailed information about the driver- behavior. In order to obtain more detailed information about pedestrian accidents, real road accidents were reconstructed with multibody simulations on PC-Crash and, by the comparison between literature findings and reconstructions, a generic accident scenario was defined. The generic accident scenario was implemented on the full scale dynamic driving simulator in use at the Laboratory for Safety and Traffic Accident Analysis (LaSIS, University of Florence, Italy) in order to analyse the driving behaviors of volunteers, also considering the influence of ADAS devices. Forty-five young volunteers were enrolled for this study, resulting in forty valid tests on different testing scenarios. Two different scenarios consisted in driving with or without ADAS in the vehicle. Different kinds of ADAS, acoustic and optical, with different time of intervention were tested in order to study the different reactions of the driver. The tests showed some interesting differences between driver's behavior when approaching the critical situation. Drivers with ADAS reacted earlier, but more slowly, depending also on the type of alarm, and often with double reaction when braking. In fact, the results of the activity showed that with ADAS intervention the time to collision (TTC) increases, but the reaction time and braking modality change: a) there is a sort of "latency" time between the accelerator pedal release and the brake pressure; b) the brake pressure is initially less intense. So the driver only partially takes advance from the TTC increase. These differences were valued not only qualitatively, but quantitatively as well. This work revealed to be useful to improve the knowledge of drivers" behavior, in order to realize a driver model that can be implemented to help attaining and assessing higher levels of automation through new technology.
Bus or heavy vehicle passenger accidents are rare events, compared with car accidents, but sometimes leads to a large number of victims especially in rollover crash scenarios. Two accidents occurred in Portugal in 2007 and 2013 in which 28 people died and more than 50 are injured, shown the importance of the investigation of such accidents. For the investigation of these accidents multidisciplinary teams are constituted with engineers and police officers. All the factors involved are taken into consideration including road design, traffic signs, maintenance and hardware, human factors, and vehicle factors. In this work a methodology to an accurate collection of the data is proposed. From the information collected the accident is reconstructed using the PC-CrashTM software. From this all the contribution factors are determined and recommendations to mitigate these crashes are listed. These two accidents are rollover accidents and the analysis of the injuries and its correlation with the use of retention systems is very important. From the medical data and with the dynamics of the accident determined simulations of the occupants with biomechanical models are carried out in order to evaluate the effect of the retention systems in the injuries. This analysis is based on injury criteria (such as Abbreviated Injury Score (AIS) or Injury Severity Scale (ISS)). With this it is possible to determine if the seat belt was worn or not.
Recent accident statistics from the German national database state bicyclists being the second endangered group of vulnerable road users besides pedestrians. With 399 fatalities, more than 14.000 seriously injured and more than 61.000 slightly injured persons on german roads in the year 2011, the group of bicyclists is ranked second of all road user groups (Statistisches Bundesamt, 2012). While the overall bicycle helmet usage frequency in Germany is very low, evidence is given that its usage leads to a significant reduction of severe head injuries. After an estimation of the benefit of bicycle helmet usage as well as an appropriate test procedure for bicyclists, this paper describes two different approaches for the improvement of bicyclist safety. While the first one is focusing on the assessment of the vehicle based protection potential for bicyclists, the second one is concentrating on the safety assessment of bicycle helmets. Within the first part of the study the possible revision of the existing pedestrian testing protocols is being examined, using in depth accident data, full scale simulation and hardware testing. Within the second part of the study, the results of tests according to supplemental test procedures for the safety assessment of bicycle helmets developed by the German Federal Highway Research Institute (BASt) are presented. An additional full scale test performed at reduced impact speed proves that measures of active vehicle safety as e.g. braking before the collision event do not necessarily always lead to a reduction of injury severity.
Die zukünftige Entwicklung der Straßenverkehrssicherheit und damit auch der Fahrzeugsicherheit wird durch gesellschaftliche, wirtschaftliche, klimapolitische und verkehrspolitische Rand- und Rahmenbedingungen und die voranschreitende technische Entwicklung geprägt sein, die auch für den Gesetzgeber eine Herausforderung darstellen. So wird sich auch das Folgeprogramm des Bundesministeriums für Verkehr, Bau und Stadtentwicklung (BMVBS) für das derzeitige aus dem Jahr 2001 stammende "Programm für mehr Sicherheit im Straßenverkehr" an den Schwerpunkten des "4th Road Safety Action Programme" ausrichten, das im Frühjahr 2010 durch die EU-Kommission veröffentlicht werden soll. Im Prozess zu einer weiteren Verbesserung der Straßenverkehrssicherheit werden unter anderem der demografische Wandel in unserer Gesellschaft, die durch eine erforderliche CO2-Reduktion bedingte Einführung alternativer Antriebe (Elektromobilität) verbunden mit Leichtbau sowie die gesetzlichen Rahmenbedingung (Wiener Abkommen) eine bedeutende Rolle spielen. Die Klärung der gesetzlichen Rahmenbedingungen ist unerlässlich, um die Vision vom unfallfreien Fahren Realität werden lassen zu können.
Beschrieben wird die Evaluierung eines Testverfahrens der Arbeitsgruppe 10 des European Experimental Vehicle Committee, mit dem die "Fußgängerverträglichkeit" von Frontflächen von Personenkraftwagen bestimmt werden kann. Dabei werden verschiedene Anprallarten von Fußgängern an Fahrzeugen simuliert: der Anprall eines Beines an den Stoßfänger, der Anprall des Oberschenkels an die Vorderkante der Fronthaube und der Anprall des Kopfes auf die Fronthaube. Im Beitrag wird auf die Durchführung von Tests zum Oberschenkelanprall und zum Beinanprall an drei verschiedenen Fahrzeugtypen eingegangen. Beschrieben werden Testverfahren, Versuchsaufbau und Versuchsdurchführung. Die Versuchsreihe zeigte, dass das entwickelte Testverfahren praktikabel ist.
Since integrated safety systems combine active and passive safety elements in one safety system, it is necessary to define new procedures to evaluate vehicle safety from the overall system point of view. The main goal of the ASSESS project is to develop harmonized and standardized assessment procedures for collision mitigation and avoidance systems. Methods and Data Sources: In ASSESS, procedures are developed for: driver behaviour evaluation, pre-crash system performance evaluation, crash performance evaluation, socio-economic assessment. This paper will concentrate on the activities related to the crash evaluation. The objective is to perform simulations, sled tests and crash tests in order tounderstand the influence of the activation of the pre-crash systems on the occupants" injuries during the crash phase. When a traffic accident is unavoidable, pre-crash systems work on various safety devices in order to improve the vehicle occupants" protection. Braking assistance and adaptive restraint systems are the main pre-crash systems whose effect on the occupants" protection will be described in this paper. Results: The results will be a description of the effect of the activation of the pre-crash systems on the crash phase. Additionally, a set of recommendations for future methodology developments will be delivered. Furthermore, a first approach to the study of the effect of the pre-crash systems activation on the occupants" protection when the impact is unavoidable will be presented. This effect will be quantified using the biomechanical values obtained from the simulation and testing activities and their related injury risks. Simulation and testing activities will consider the following scenarios: - No activation of any pre-crash system, - Activation of one or a combination of several pre-crash systems. In this way, differences in the results obtained from different scenarios will show the effect of each pre-crash system separately during the crash phase. Discussion and Limitations: The set of activities developed in this research project is limited by the fact that with the given resources only a limited number of vehicle models could be investigated. In addition, there are also limitations related to the injury risk curves and the passive safety tools currently on the market. Conclusion and Relevance to session submitted: The paper will present a complete analysis of the effect of pre-crash systems during the crash phase when the impact is unavoidable. Details, limitations and first application experience based on a few examples will be discussed. Currently, there is not any regulation, assessment program, or other similar official procedure able to assess pre-crash systems during the crash phase. This project comprises phases of traffic accidents which have been historically analysed separately, and aims to evaluate them taking into account their interrelationship. ASSESS is one of the first European projects which deals in depth with the concept of integrated safety, defining methodologies to analyse vehicle safety from a global point of view.
The advent of active safety systems calls for the development of appropriate testing methods. These methods aim to assess the effectivity of active safety systems based on criteria such as their capability to avoid accidents or lower impact speeds and thus mitigate the injury severity. For prospective effectivity studies, simulation becomes an important tool that needs valid models not only to simulate driving dynamics and safety systems, but also to resolve the collision mechanics. This paper presents an impact model which is based on solving momentum conservation equations and uses it in an effectivity study of a generic collision mitigation system in reconstructed real accidents at junctions. The model assumes an infinitely short crash duration and computes output parameters such as post-crash velocities, delta-v, force directions, etc. and is applicable for all impact collision configurations such as oblique, excentric collisions. Requiring only very little computational effort, the model is especially useful for effectivity studies where large numbers of simulations are necessary. Validation of the model is done by comparison with results from the widely used reconstruction software PC-Crash. Vehicles involved in the accidents are virtually equipped with a collision mitigation system for junctions using the software X-RATE, and the simulations (referred to as system simulations) are started sufficiently early before the collision occurred. In order to assess the effectivity, the real accident (referred to as baseline) is compared with the system simulations by computing the reduction of the impact speeds and delta-v.
Im Rahmen dieses Forschungsvorhabens wurde ein Verfahren entwickelt und validiert, mit dem sich reale Emissionsfaktoren für motorisierte Zweiräder in der Systematik des HBEFA generieren lassen. Das Verfahren basiert auf Fahrzeug-Emissionsmessungen in realen Testzyklen, vermessen am Rollenprüfstand oder auf der Straße, als Eingabe für ein Simulationsmodell. Das Modell erzeugt aus den Messungen Motorkennfelder, in denen die Abgasemissionen und der Kraftstoffverbrauch über normierter Motordrehzahl und normierter Motorleistung abgelegt werden. Für jedes gemessene Kfz ergibt sich ein normiertes Emissions-Motorkennfeld. Aus den einzelnen Kennfeldern können dann Durchschnittskennfelder je Fahrzeugkategorie (z.B. Motorrad über 500ccm, EURO 3) gebildet werden. Die Motordrehzahl muss in den Emissionstests entweder gemessen, oder aus Geschwindigkeit, Gang, Reifenumfang und Übersetzungen berechnet werden. Die Motorleistung kann mittels gemessenem CO2-Massenstrom und der Drehzahl aus "generischen CO2-Kennfeldern" ermittelt werden, da im Allgemeinen keine gemessene Leistung vorliegt. Um mit dem Modell dann Emissionsfaktoren für beliebige Fahrzyklen zu bestimmen, wird die Motorleistung aus der Fahrzeuglängsdynamik, den Verlusten im Antriebstrang und dem Leistungsbedarf von Nebenaggregaten aus dem jeweils vorgegebenen Geschwindigkeits- und Steigungsverlauf berechnet. Zur Bestimmung der Drehzahl wird zuerst ein passender Gang berechnet und dann aus den Übersetzungen die Motordrehzahl. Steht die geforderte Motorleistung in keinem Gang zur Verfügung, wird die Beschleunigung im betroffenen Zeitschritt so reduziert, dass sich ein Volllastbetrieb ergibt. Die Berechnungen erfolgen in 1Hz Auflösung. Für jede Sekunde werden dann aus dem zugehörigen Motorkennfeld die Emissionen entsprechend der Drehzahl und Leistung interpoliert. Die integrierten Emissionswerte über den Zyklus ergeben die Summenemissionen, die Division durch die zurückgelegte Strecke die Emissionsfaktoren in g/km. Die Methode wurde im Simulationsprogramm PHEM implementiert. Da PHEM bereits in einem ähnlichen Verfahren Emissionsfaktoren für PKW, LNF und SNF berechnet, war der Zusatzaufwand zum Einbau von Zweirädern nieder und alle Zusatzfunktionen von PHEM können auch für Zweiräder verwendet werden (z.B. Dynamikkorrekturen, automatisierte CO2-basierte Kennfelderzeugung, Batch-Modus, etc.). In dem Projekt wurde die Modellentwicklung und Validierung anhand von 4 gemessenen Zweirädern durchgeführt. Die Tests umfassten Abgasmessungen auf einem Rollenprüfstand sowie On-Road-Messungen mittels PEMS. Die Messkampagne wurde auch genutzt, um einen Vorschlag für ein einheitliches Minimalmessprogramm zur Bestimmung von Emissionsfaktoren von Zweirädern zu erarbeiten. Dazu wurden umfangreiche Fahrversuche im realen Betrieb durchgeführt, die gemessenen Zyklen in Teilstücke verschiedener Verkehrssituationen unterteilt und je Verkehrssituation ein repräsentatives Teilstück bestimmt. Diese wurden dann zu "Real World Rollenzyklen" zusammengefügt. Bei einem Motorradzyklus ist auch ein sportlicher Fahranteil mit Steigung enthalten. Damit ist sichergestellt, dass die Motorkennfelder mit diesen Rollentests gut abgedeckt sind und bei der Berechnung von Emissionsfaktoren keine Extrapolationen von Emissionswerten erforderlich sind. Die am Markt befindlichen PEMS Systeme sind für die Verwendung bei Zweirädern wegen deren Gewicht und Baugröße nicht für alle Fahrzeuge geeignet. PEMS Messungen sind vorerst nur bei größeren Motorrädern im realen Verkehr möglich. Die Emissionskennfelder enthalten jeweils CO, CO2, NOx, HC sowie optional auch die vom FTIR gemessenen Komponenten und Partikelanzahl. Die nicht limitierten Abgaskomponenten aus der FTIR Messung können, wegen der teilweise sehr niederen Emissionsniveaus, nur unsicher zeitaufgelöst gemessen und simuliert werden, so dass hier die Verwendung von Zyklusmittelwerten in [g/km] oder von mittleren Prozentwerten an den HC und NOx Emissionen empfohlen wird. Mit der entwickelten Methode und der Software PHEM bestehen nunmehr die Grundlagen, Emissionsfaktoren für Zweiräder in gleicher Qualität wie sie bei PKW und Nutzfahrzeugen bereits Standard ist, zu gerieren. Die Methoden und mögliche gemeinsame Messprogramme werden in der ERMES Gruppe bereits diskutiert und werden hoffentlich schon 2018 zu einer deutlichen Verbreiterung der Datengrundlage zum Emissionsverhalten von Zweirädern führen.
At the 2005 ESV conference, the International Harmonisation of Research Activities (IHRA) side impact working group proposed a 4 part draft test procedure, to form the basis of harmonisation of regulation world-wide and to help advances in car occupant protection. This paper presents the work performed by a European Commission 6th framework project, called APROSYS, an further development and evaluation of the proposed procedure from a European perspective. The 4 parts of the proposed procedure are: - A Mobile Deformable Barrier test; - An oblique Pole side impact test; - Interior headform tests; - Side Out of Position (OOP) tests. Full scale test and modelling work to develop the Advanced European Mobile Deformable Barrier (AE-MDB) further is described, resulting in a recommendation to revise the barrier face to include a bumper beam element. An evaluation of oblique and perpendicular pole tests was made from tests and numerical simulations using ES-2 and WorldSID 50th percentile dummies. It was concluded that an oblique pole test is feasible but that a perpendicular test would be preferable for Europe. The interior headform test protocol was evaluated to assess its repeatability and reproducibility and to solve issues such as the head impact angle and limitation zones. Recommendations for updates to the test protocol are made. Out-of-position (OOP) tests applicable for the European situation were performed, which included additional tests with Child Restraint Systems (CRS) which use is mandatory in Europe. It was concluded that the proposed IHRA OOP tests do cover the worst case situations, but the current test protocol is not ready for regulatory use.
The need of passive safety devices, able to reduce the accidents and the severity of injuries suffered by motorcyclist, distinctly arises from data on accident statistics. In this paper, the effectiveness of an airbag device fitted in the biker- garments has been verified through various numerical simulations. Two simple test conditions were defined, in order to investigate the performance of the device both for back and front impacts, and simulated at various impact speeds. With the aim of providing more information about the actual capability of the airbag to reduce the severity of the injuries, one of accident scenario described by ISO 13232:2005 has been also investigated, checking the real effectiveness of the airbag strap-based firing system too. Confrontation of injury indexes resulting from simulation with and without airbag made possible a realistic evaluation of the harm reduction induced by the airbag presence.
Ausgehend von den Unfalldaten der letzten Jahre wird die Bedeutung von Fußgängerunfällen im Unfallgeschehen dargestellt. Betrachtet man die bei Unfällen getöteten Verkehrsteilnehmer, so sind am häufigsten Personen in Kraftfahrzeugen betroffen. Am zweithäufigsten werden, gemäß der Unfallstatistik, Fußgänger getötet. Eine Möglichkeit zur Verbesserung des Schutzes von Fußgängern und anderen sogenannten "ungeschützten Verkehrsteilnehmern" im Falle einer Kollision mit einem Kraftfahrzeug sind Maßnahmen am Fahrzeug. Um die Wirksamkeit derartiger Maßnahmen zu beurteilen, wurde durch das EEVC (European Enhanced Vehicle-Safety Committee) ein Prüfverfahren entwickelt. Es handelt sich dabei um ein Komponentenprüfverfahren, mit dem die Frontstruktur von Fahrzeugen, die bei einer Kollision mit einem Fußgänger hauptsächlich betroffen ist, geprüft wird. Es werden keine den gesamten Menschen repräsentierende Dummies verwendet, stattdessen werden Prüfkörper, die einzelne Körperteile simulieren, eingesetzt. Dieser EEVC Vorschlag wird geschildert. Darüber hinaus wird über Aktivitäten außerhalb des EEVC berichtet, sowie über den aktuellen Stand der Bemühungen der Europäischen Kommission in Bezug auf den Fußgängerschutz, die derzeit, auf Grundlage des Prüfvorschlages des EEVC, einen Vorschlag für eine Europäische Richtlinie erarbeitet.
In recent years the boundaries between active and passive safety blurred more and more. Passive safety in the traditional term includes all safety aspects to prevent occupants to be injured or at least injury severity should be reduced. Passive Safety starts with the collision (first vehicle contact) and ends with rescue (open vehicle doors). Within this phase the occupant has to be protected by the passenger compartment whereby no intrusion should occur. Active safety on the other side was developed to interact prior to the collision whereby the goal is to prevent accidents. The extensive interaction between active and passive safety led to the terminologies "Primary" and "Secondary" safety whereas the expression Integrated Safety Concept was generated. Within this study the most well documented single vehicle accidents with cars not equipped with ESP were identified from the PENDANT database and reconstructed. Additional cases were found in the database ZEDATU of TU Graz. In comparison each case was simulated with the assumption that the cars were equipped with ESP. The differences regarding accident avoidance or crash severity as well as reduction of injury risk were analysed.
In the European Project FIMCAR, a proposal for a frontal impact test configuration was developed which included an additional full width deformable barrier (FWDB) test. Motivation for the deformable element was partly to measure structural forces as well as to produce a severe crash pulse different from that in the offset test. The objective of this study was to analyze the safety performance of vehicles in the full width rigid barrier test (FWRB) and in the full width deformable barrier test (FWDB). In total, 12 vehicles were crashed in both configurations. Comparison of these tests to real world accident data was used to identify the crash barrier most representative of real world crashes. For all vehicles, the airbag visible times were later in the FWDB configuration. This was attributed to the attenuation of the initial acceleration peak, observed in FWRB tests, by the addition of the deformable element. These findings were in alignment with airbag triggering times seen in real world crash data. Also, the dummy loadings were slightly worse in FWDB compared to FWRB tests, which is possibly linked to the airbag firing and a more realistic loading of the vehicle crash structures in the FWDB configuration. Evaluations of the lower extremities have shown a general increasing of the tibia index with the crash pulse severity.
For the estimation of the benefit and effect of innovative Driver Assistance Systems (DAS) on the collision positions and by association on the accident severity, together with the economic benefit, it becomes necessary to simulate and evaluate a variety of virtual accidents with different start values (e.g. initial speed). Taken into account the effort necessary for a manual reconstruction, only an automated crash computation can be considered for this task. This paper explains the development of an automated crash computation based on GIDAS. The focus will be on the design of the virtual vehicle models, the method of the crash computation as well as exemplary applications of the automated crash computation. For the first time an automated crash computation of passenger car accidents has been realized. Using the automated crash computation different tasks within the field of vehicle safety can be elaborated. This includes, for example, the calculation of specific accident parameters (such as EES or delta-V) for various accident constellations and the estimation of the economic benefit of DAS using IRFs (Injury Risk Functions).
Die vorliegende Arbeit beschäftigt sich mit den Auswirkungen alternativer Antriebskonzepte auf die Fahrdynamik von Pkw. Es werden einleitend die konventionellen und alternativen Antriebskonzepte sowie Unterschiede in Hinblick auf die Fahrdynamik herausgearbeitet. Die Ergebnisse einer Recherche zur Fahrwerksentwicklung von Hybrid- und Elektrofahrzeugen zeigen keine klaren Trends zu neuartigen oder geänderten Fahrwerkskonzepten, sodass auf eine getrennte Betrachtung von Fahrwerken für Fahrzeuge mit konventionellen und alternativen Antrieben verzichtet werden kann. Die erarbeiteten Unterschiede zwischen konventionellen und alternativen Antrieben zeigen, dass die Möglichkeit der Rekuperation von Hybrid- und E-Fahrzeugen insbesondere bei kombinierten Längs- und Querkräften zu deutlichen Auswirkungen auf die Fahrdynamik führen kann. Im nächsten Schritt werden daher Fahrmanöver zusammengestellt und in Bezug auf die Relevanz für die Rekuperation analysiert. Dabei erweist sich das nach DIN ISO 7975 genormte Fahrmanöver "Bremsen im Kreis" als zielführend, die Auswirkungen der Rekuperation auf die Fahrdynamik zu analysieren. Außerdem wird das Fahrzeugverhalten bei einer Geradeausbremsung und folgender Lenkanregung sowie bei einer Bremsung auf μ-Split untersucht, da auch hier Wechselwirkungen von Antrieb und Fahrwerk auftreten. Zur Beurteilung der Ergebnisse wird neben der Fahrstabilität auch die Wahrnehmbarkeit eines geänderten Fahrverhaltens betrachtet. Anhand einer Literaturrecherche wurde für die Giergeschwindigkeit ein Schwellwert von 3-°/s für die Wahrnehmbarkeit gefunden. Die Ergebnisse einer Simulationsstudie mit zwei Fahrzeugkonzepten (Front-/Heckantrieb) in den drei genannten Fahrmanövern zeigen, dass die Rekuperation in weiten Bereichen der Längsverzögerungen sinnvoll eingesetzt werden kann. Bei der Bremsung in der Kurve führt die Rekuperation an der Vorderachse zu einer deutlichen Reduzierung störender Fahrzeugreaktionen und kann auch bei höheren Querbeschleunigungen verwendet werden. Bei der Rekuperation an der Hinterachse kann es insbesondere auf Niedrigreibwerten bei Bremsungen in der Kurve zu kritischen Fahrzuständen kommen. Durch die Begrenzung des Rekuperationsmomentes bei großen Schlupfwerten kann die Stabilität des Fahrzeugs jedoch sichergestellt werden. Auch die Ergebnisse der Simulationen der anderen Fahrmanöver zeigen, dass bei geringen Schlupfwerten keine wahrnehmbaren fahrdynamischen Unterschiede festzustellen sind.
Assessment of the effectiveness of Intersection Assistance Systems at urban and rural accident sites
(2015)
An Intersection Collision Avoidance System is a promising safety system for accident avoidance or injury mitigation at junctions. However, there is still a lack of evidence of the effectiveness, due to the missing real accident data concerning Advanced Driver Assistance Systems. The objective of this study is the assessment of the effectiveness of an Intersection Collision Avoidance System based on real accidents. The method used is called virtual pre-crash simulation. Accidents at junctions were reconstructed by using the numerical simulation software PC-Crashâ„¢. This first simulation is called the baseline simulation. In a second step the vehicles of these accidents were equipped with an Intersection Collision Avoidance System and simulated again. The second simulation is called the system simulation. In the system simulation two different sensors and four different intervention strategies were used, based on a time-to-collision approach. The effectiveness of Intersection Collision Avoidance System has been evaluated by using an assessment function. On average 9% of the reviewed junction accidents could have been avoided within the system simulations. The other simulation results clearly showed a change in the principal direction of force, delta-v and reduction of the injury severity.
In the last years there has been a decline in accident figures in Germany especially for four wheeled vehicles. At the same time, accident figures for motorcycles remained nearly constant. About 17 % of road traffic fatalities in the year 2006 were motorcyclists. 33 % of these riders were killed in single vehicle crashes. This leads to the conclusion that improving driving dynamics and driving stability of powered two wheelers would yield considerable safety gains. However, the well-known measures for cars and trucks with their proven effectiveness cannot be transferred easily to motorcycles. Therefore studies were carried out to examine the safety potential of Anti Lock Braking Systems (ABS) and Vehicle Stability Control (VSC) for motorcycles by means of accident analysis, driving tests and economical as well as technical assessment of the systems. With regard to ABS, test persons were assigned braking tasks (straight and in-curve) with five different brake systems with and without ABS. Stopping distances as well as stress and strain on the riders were measured for 9 test riders who completed 105 braking manoeuvres each. Knowing the ability of ABS to avoid falls during braking in advance of a crash and taking into account the system costs, a cost benefit analysis for ABS for motorcycles was carried out for different market penetration of ABS, i.e. equipment rates, and different time horizons. The potential of VSC for motorcycles was estimated in two steps. First the kinds of accidents that could be prevented by such a system at all have been analysed. For these accident configurations, simulations and driving tests were then performed to determine if a VSC was able to detect the critical driving situation and if it was technically possible to implement an actuator which would help to stabilise the critical situation.
This study investigates the protection offered by passive head-restraints with different stiffness and energy dissipation properties. For this purpose, computational multi-body models of a generic car seat and a biofidelic 50thpercentile male human for rear impact are used to study different seat designs and passive head-restraints. The validated seat-occupant model is also used in the design of two different car-seat models which are shown to effectively mitigate whiplash by utilising a crash-energy distribution technique. Five different passive head-restraints with varying stiffness (low-medium-high) and energy dissipation percentages (low-high) are successively attached to four different car-seat models. The simulation results indicate that the protection offered by head restraints is strongly dependent on the seat design. It has also been shown that the stiffness of the passive head-restraint has much more influence on whiplash-risk in comparison to its energy dissipation capacity.
Ziel dieser Arbeit war die Entwicklung eines numerischen Modells des menschlichen knöchernen Thorax, das insbesondere altersabhängige geometrische Faktoren berücksichtigt. Dieses Modell soll sowohl die männliche als auch die weibliche Population der über 64-Jährigen repräsentieren und eine an diese Altersgruppe angepasste Verletzungssimulation ermöglichen. Die vorliegende Studie identifiziert zunächst an Hand eines Kollektivs aus 126 postmortem und 40 klinischen computertomografischen Schnittbildaufnahmen eine ganze Reihe geometrischer Parameter, die sich mit dem Alter verändern. Zu den untersuchten Parametern gehören sowohl Winkel der Rippen im Raum und innerhalb des Rippenbogens, eine detaillierte Erfassung von Parametern der einzelnen Rippe (Querschnittsfläche, Krümmung, Longitudinale Verdrillung), Parameter der Wirbelsäule als Ganzes (Skoliose, Kyphose, Rotation) und einzelner Wirbel sowie des Brustbeins. Weiterhin wurden die Grundmasse des ganzen Thorax (Thoraxtiefe, Thoraxbreite) untersucht. Die hier gefundenen Altersabhängigkeiten dienten als Eingabeparameter zur Erstellung von insgesamt neun aus dem Menschmodell THUMS 3 gemorphter alter und junger Finite-Elemente Thoraxmodelle. Implementiert wurden hierbei sowohl Durchschnittsmaße als auch extreme Maße. Die Ergebnisse zeigen mehrere sich im Alter signifikant verändernde Parameter. Als wichtigste unter ihnen sind eine Zunahme der Thoraxtiefe und Thoraxbreite im Alter, die signifikante Veränderung einiger Rippenwinkel im Raum sowie der Krümmung der sechsten und siebten Rippe zu nennen. Zudem wird die Wirbelsäulenform kyphotischer und das Sternum am Übergang zwischen Manubrium und Corpus sternii gewinkelter. Die Menschmodelle THUMS 3, THUMS 4 und HUMOS 2 sind weder als typisch alt, noch typisch jung einzuordnen, dies unterscheidet sich teils von Parameter zu Parameter. Die auf Basis der Geometrie-Inputdaten durchgeführten Finite-Elemente Simulationen zeigen einen deutlichen Einfluss der zunehmenden Thoraxtiefe im Alter auf die posteriore Kraft an der Auflagefläche der Rippen sowie die Spannungsverteilung entlang der Rippen. Sie wirkt sich jedoch entgegen der Erwartungen protektiv aus und dominiert andere Faktoren wie die unterschiedlichen Rippenwinkel. Abschließend betrachtet wird ein Menschmodell, welches das 75. Perzentil der alten Bevölkerung repräsentiert, als ausreichend aussagekräftig hinsichtlich der im Alter veränderten Geometrie klassifiziert und gleichzeitig als mit angemessenem Aufwand realisierbar angesehen. Es wird daher für die Bewertung von Sicherheitssystemen empfohlen.
For more than a decade, ADAC accident researchers have analysed road accidents with severe injuries, recording some 20,000 accidents. An important task in accident research is to determine the causative factors of road accidents. Apart from vehicle engineering and human factors, accident research also focuses on infrastructural and environmental aspects. To find out what accident scenarios are the most common in ADAC accident research and what driver assistance systems can prevent them, our first task was to conduct a detailed accident analysis. Using CarMaker, we performed a realistic simulation of accident scenarios, including crashes, with varying parameters. To begin with, we made an initial selection of driver assistance systems in order to determine those with the greatest accident prevention potential. One important finding of this study is that the safety potential of the individual driver assistance systems can actually be examined. It also turned out that active safety offers even much more potential for development and innovation than passive safety. At the same time, testing becomes more demanding, too, as new systems keep entering the market, many of them differing in functional details. ADAC will continue to test all driver assistance systems as realistically as possible so as to be able to provide advice to car buyers. Therefore, it will be essential to develop and improve test conditions and criteria.
The development of tyre- and truck-manufacturers leads to the direction to introduce wide base single tyres (size 495/45R22,5) instead of twin tyres on the driving axle of trucks, tractors and busses. To study the driving behaviour and safety of various trucks and units with different tyre combinations and loading conditions was the aim of the study. A computer-aided simulation was used for this investigation. Drive tests with a 40 t unit with prototype single tyres on the drive axle were carried out to verify the simulation. Alterations in driving behaviour and driving safety are mainly dependent on the tyre cornering stiffness. The prototype wide single tyres had a higher lateral stiffness which leads to a higher degree of under-steering (safer driving behaviour). The altered spring base on the drive axle had no influence on the side- tilt stability of vehicle combinations but the solo truck profited from the higher rear axle roll stiffness (less danger for roll-over accidents). As far as the driving safety is concerned nothing speaks against wide base tyres on the drive axle. The simulation of a tyre defect in a bend (assuming 40% of the max. transferable side force for the flat tyre) showed no increased danger using wide single tyres. Later driving tests showed however the need of tyre run flat possibilities to avoid jack-knifing of road trains. Also tyre pressure monitoring systems and electronic stability programs for the trucks are advised.
Accident research 2.0: New methods for representative evaluation of integral safety in traffic
(2013)
BMW has developed a procedure for rating Advanced Driver Assistance Systems (ADAS) benefits that integrates two distinct tools. The tool "S.A.F.E.R." is designed to analyze the pre-crash phase. The aim of S.A.F.E.R. is to simulate all relevant processes in sufficient detail to obtain reproducible estimates of key indicators (effectiveness, false positives, etc.). The relevant processes include not only traffic and vehicle dynamics, but also environmental and most importantly human factors. Representative distributions of factors and parameters are obtained by taking the stochastic variation of all relevant parameters into account in the simulations. The second tool, known as "ICOS", has been designed to provide a high-resolution, high-fidelity description of crash phase dynamics. If one converts the outputs of stochastic simulation into inputs for crash dynamics, the result is a comprehensive description of exactly how a safety system can reduce injuries. Applications currently focus on high-fidelity simulation of individual crashes in order to enhance our understanding and optimization of connected safety systems. An integrated simulation process thus allows an exact prediction of the effectiveness in individual cases in terms of injury severity. The development and rating of integral safety need to reflect the true efficiency in the field. The integrated approach described here could provide a valid and reproducible basis for rating connected systems of active and passive safety. In particular, "virtual experiments" using a traffic-based approach and incorporating models of all relevant processes constitute an essential element of the approach.
One main objective of the EU-Project SENIORS is to provide improved methods to assess thoracic injury risk to elderly occupants. In contribution to this task paired simulations with a THOR dummy model and human body model will be used to develop improved thoracic injury risk functions. The simulation results can provide data for injury criteria development in chest loading conditions that are underrepresented in PMHS test data sets that currently proposed risk functions are based on. To support this approach a new simplified generic but representative sled test fixture and CAE model for testing and simulation were developed. The parameter definition and evaluation of this sled test fixture and model is presented in this paper. The justification and definition of requirements for this test set-up was based on experience from earlier studies. Simple test fixtures like the gold standard sled fixture are easy to build and also to model in CAE, but provide too severe belt-only loading. On the other hand a vehicle buck including production components like airbag and seat is more representative, but difficult to model and to be replicated at a different laboratory. Furthermore some components might not be available for physical tests at later stage. The basis of the SENIORS generic sled test set-up is the gold standard fixture with a cable seat back and foot rest. No knee restraint was used. The seat pan design was modified including a seat ramp. The three-point belt system had a generic adjustable load limiter. A pre-inflated driver airbag assembly was developed for the test fixture. Results of THOR test and simulations in different configurations will be presented. The configurations include different deceleration pulses. Further parameter variations are related to the restraint system including belt geometry and load limiter levels. Additionally different settings of the generic airbag were evaluated. The test set-up was evaluated and optimized in tests with the THOR-M dummy in different test configurations. Belt restraint parameters like D-ring position and load limiter setting were modified to provide moderate chest loading to the occupant. This resulted in dummy readings more representative of the loading in a contemporary vehicle than most available PMHS sled tests reported in the literature. However, to achieve a loading configuration that exposes the occupant to even less severe loading comparable to modern vehicle restraints it might be necessary to further modify the test set-up. The new generic sled test set-up and a corresponding CAE model were developed and applied in tests and simulations with THOR. Within the SENIORS project with this test set-up also volunteer and PMHS as well as HBM simulations are performed, which will be reported in other publications. The test environment can contribute in future studies to the assessment of existing and new frontal impact dummies as well as dummy improvements and related instrumentation. The test set-up and model could also serve as a new standard test environment for PMHS and volunteer tests as well as HBM simulations.