91 Fahrzeugkonstruktion
Filtern
Erscheinungsjahr
- 2013 (20)
- 2017 (18)
- 2011 (10)
- 2001 (9)
- 2009 (9)
- 2014 (9)
- 1998 (7)
- 2007 (7)
- 2004 (6)
- 2003 (5)
- 2016 (5)
- 2019 (5)
- 1996 (4)
- 2005 (4)
- 1995 (3)
- 2018 (3)
- 2000 (2)
- 2002 (2)
- 2006 (2)
- 2008 (2)
- 2010 (2)
- 2012 (2)
- 2015 (2)
- 1976 (1)
- 1978 (1)
- 1979 (1)
- 1983 (1)
- 1984 (1)
- 1986 (1)
- 1989 (1)
- 1992 (1)
- 1993 (1)
- 1994 (1)
- 1997 (1)
- 1999 (1)
Dokumenttyp
- Konferenzveröffentlichung (82)
- Buch (Monographie) (35)
- Wissenschaftlicher Artikel (16)
- Arbeitspapier (12)
- Teil eines Buches (Kapitel) (5)
Schlagworte
- Safety (67)
- Sicherheit (66)
- Fahrzeug (50)
- Vehicle (50)
- Bewertung (43)
- Anfahrversuch (39)
- Evaluation (assessment) (39)
- Impact test (veh) (36)
- Deutschland (35)
- Germany (35)
Institut
- Abteilung Fahrzeugtechnik (150) (entfernen)
Die UNECE Regelung R58 regelt die Beschaffenheit und die Installation von Heckunterfahrschutzsystemen an schweren Güterkraftfahrzeugen, deren Ziel die Verbesserung der Kompabilität zwischen Pkw-Frontstrukturen und Lkw-Hecks ist. Dennoch verunglücken laut amtlicher Unfallstatistik allein in Deutschland rund 30 Pkw-Insassen in Heckauffahrunfällen auf Lkw tödlich, da diese Vorrichtungen hinsichtlich Einbauhöhe und Steifigkeit den Anforderungen des realen Unfallgeschehens nicht genügen. Das Ziel dieser Studie ist eine quantitative Abschätzung der möglichen Reduzierung der Verletzungsschwere mit Hilfe eines statistischen Modells, die durch eine Anpassung der geltenden Bestimmungen und die damit verbundenen technischen Veränderungen des bereits vorgeschriebenen Heckunterfahrschutzes zu erreichen wäre. In einer Nutzen-Kosten-Analyse wird die Wirtschaftlichkeit dieser Modifizierungen mit einem idealen Notbremsassistenten verglichen. Die Untersuchung orientiert sich dabei an den aktuell in der UN-ECE WP29/GRSG in Genf diskutierten Vorschlägen zur Anpassung der ECE-R58. Das verwendete ordinale Probit-Modell stellt einen Zusammenhang zwischen der Verletzungsschwere im auffahrenden PKW und erklärenden Größen her, in diesem Fall der kinetischen Energie des unterfahrenden Pkws und der strukturellen lnteraktion zwischen Lkw-Heck und Pkw-Front. Diese Maßnahmen könnten demnach 53 - 78% der Getöteten sowie 27 - 49% der Schwerverletzten bei diesen Unfallkonstellationen reduzieren, was pro Jahr 20 Getöteten und 95 Schwerverletzten entsprechen würde. Somit würde eine Modifikation einer bestehenden passiven Schutzmaßnahme an jährlich 100.000 neuzugelassenen Lkw und Anhängern bereits 20 Getötete adressieren. Im Vergleich dazu müssten jährlich 3 Millionen Pkw mit zusätzlicher Sensorik und Aktuatorik für einen idealen Notbremsassistenten ausgestattet werden, um im Idealfall alle Heckauffahrunfälle von Pkw auf andere Pkw oder Lkw und damit 53 Getötete zu vermeiden. Daher fällt auch das Nutzen-Kosten-Verhältnis deutlich zugunsten des verbesserten Heckunterfahrschutzes aus.
Schutz von schwächeren Verkehrsteilnehmern: kommende Anforderungen aus Gesetzgebung und Euro NCAP
(2017)
Systeme der aktiven Fahrzeugsicherheit, insbesondere Notbremsassistenzsysteme und automatische Notbremssysteme, haben in den letzten zwei Dekaden große technische Fortschritte gemacht, und das im Wesentlichen ohne "Druck" von Gesetzgeber oder unabhängigen Testorganisationen " diese können aber durch passende Anforderungen den Vormarsch der Systeme in die Breite und die Ausnutzung von ansonsten für den Hersteller vielleicht nicht wirtschaftlichen Potentialen unterstützen. Dieser Bericht hat das Ziel, einen Überblick über die kommenden Anforderungen an Schutzsysteme für schwächere Verkehrsteilnehmer zu geben und diese Anforderungen in den Kontext Euro NCAP (=welchen Einfluss haben diese Anforderungen auf die Gesamtbewertung?) sowie Gesetzgebung (schwächere Anforderungen, aber dafür ein Markteintrittskriterium) zu stellen: - Anforderungen und Testprozeduren für Notbremsassistenz Fahrradunfälle 2018 und 2020 in Euro NCAP; - Anforderungen und Testprozeduren für Notbremsassistenz bei Nachtunfällen mit Fußgängern in Euro NCAP 2018; - Anforderungen und Testprozeduren für Abbiegeassistenzsysteme zum Schutz von Radfahrern in Unfallsituationen mit rechtsabbiegenden Lkw innerhalb der Fahrzeugtypgenehmigung.
Um festzustellen, ob bei vorübergehendem Fahrzeugstillstand kurzzeitige Motorabschaltungen gegenüber konstantem Leerlaufbetrieb eine Reduzierung oder aber aufgrund des Startvorganges eine Zunahme der Kraftstoffverbräuche und Schadstoffemissionen zur Folge haben, wurde mit dem Emissions-Mess-Fahrzeug (EMF) der BASt ein entsprechendes Untersuchungsprogramm realisiert. Dabei war auch der Fragestellung nachzugehen, was dem Autofahrer an einer roten Ampel oder einem Bahnübergang (oder den Kommunen bei entsprechender Beschilderung) zu empfehlen ist, dass heißt ob der Motor abgeschaltet werden soll oder nicht. Im ersten Abschnitt des Projektes wurde anhand einzelner Motorstopp-/Startvorgänge untersucht, wie lange der Motor mindestens ausgeschaltet werden muss, damit Einsparungen möglich sind. Es stellte sich heraus, dass die Standzeiten, ab wann aus der vorübergehenden Motorabschaltung Vorteile für die Umwelt entstehen, für die verschiedenen Abgaskomponenten sehr weit auseinander liegen: bei Kraftstoffverbrauch und Stickoxidemissionen etwa ab zehn Sekunden, bei Kohlenwasserstoff- und Kohlenmonoxid-Emissionen erst ab etwa fünf Minuten. Im zweiten Projektabschnitt wurden Messfahrten im Straßenverkehr durchgeführt, die einen definierten, 20 Sekunden dauernden Fahrzeugstillstand in Form einer Ampelstopp-Simulation beinhalteten. Mit diesem realitätsnahen Versuchskonzept sollten die Ergebnisse aus den Motorstopp-Startversuchen überprüft werden. Es zeigte sich, dass die unter idealen Bedingungen erarbeiteten Resultate des ersten Abschnitts auch auf reale Verhältnisse angewendet werden können. Alle Ergebnisse beziehen sich auf das Messfahrzeug mit warmem Motor. Die Übertragbarkeit auf andere Fahrzeuge - insbesondere solche mit anderen Motor- beziehungsweise Gemischaufbereitungs- und Abgasreinigungskonzepten - ist daher nicht oder nur eingeschränkt zulässig. Die Größenordnungen der Ergebnisse können aber vermutlich auf vergleichbare, mit Katalysator ausgestattete Fahrzeuge übertragen werden.
Many big cities in Europe and elsewhere in the world have problems managing the traffic especially during rush hours. The improvement of the parking problematic and environmental protection as well are important aspects for the future traffic design of urban areas. To improve the traffic situation the development of new traffic concepts and alternative vehicles are required. The BMW company has developed a new type of two-wheel vehicle. This two-wheeler constitutes a totally new concept. BMW implemented a lot of safety features, such as a structure made up of rollover bars and a crush element instead of a front protecting plate. Furthermore the driver can secure himself with two safety belts. The paper contains a description of the novel two-wheel vehicle concept designed so far. BMW's concept and the safety features are also explained. The Federal Highway Research Institute (BASt) was given the task of assessing the concept as a whole with regard to the active and passive safety and the exemption of the obligation to wear a helmet. The expertise concluded that the BMW two-wheeler concept has a very high safety standard. Some extracts of the expertise, in particular the investigations concerning the exemption of the obligation to wear a helmet are presented. Common legal requirements for the vehicle registration of vehicle concepts similar to the BMW two-wheeler in Germany have been formulated.
Safety of light goods vehicles - findings from the German joint project of BASt, DEKRA, UDV and VDA
(2011)
Light goods vehicles (LGVs) are an important part of the vehicle fleet, providing a vital component in the European transportation system. On the other hand, LGVs are in the focus of public discussion regarding road safety. In order to analyse the accident situation of LGVs in an objective manner, Federal Highway Research Institute (BASt), VDA, DEKRA and German Insurers Accident Research (UDV) launched a joint project. The aim of this project, which will be finished by mid of 2011, is to identify reasonable measures which will further improve the safety of LGVs. For the first time, these partners jointly together conducted a research project and put together their know-how in accident research. Analyses are based on real-life accident data from the GIDAS database, the Accident Database of UDV (UDB), the DEKRA database and national statistics. The findings deliver answers to questions within the arena of future legislative actions and consumer protection activities. The analyses of databases cover areas of primary and secondary safety of LGVs with a special focus on advanced driver assistance systems (ADAS), driver behaviour as well as partner and occupant protection. Key figures from national statistics are used to highlight hotspots of accidents of LGVs in Germany. Finally, the proposed countermeasures are assessed regarding their potential effectiveness. Amongst others, the results show that the accident situation of LGVs is very similar to that of passenger cars. Noteworthy variations could be found in collisions with pedestrians, at reversing and regarding accident causes. Occupant safety of LGVs is on a higher level compared to cars. Results indicate that seatbelt use is on a significantly lower level compared to cars. This leads to higher-than-average injury risk for unbelted LGV occupants. When it comes to partner protection, there are problems with compatibility at LGVs. For car occupants there is a very high injury risk when colliding with a LGV. It indicates that higher passive safety test standards for LGVs would be counterproductive if they further increase stiffness of LGVs. The analysis of LGV-pedestrian accidents shows that pedestrian kinematic differs significantly from car-pedestrian accidents. At this point, existing pedestrian related test standards developed for cars cannot be adopted to LGVs. When it comes to active safety, ESC proved its effectiveness once again. Beyond that, rear view cameras, advanced emergency braking systems and lane departure warning systems show a safety potential, too. In addition to any technical countermeasures previously discussed, the importance of the driver behavior and attitude regarding the accident risk was investigated. In order to develop successful actions it is important to understand the main target population. In the case of LGV especially the crafts business and smaller companies are the major contributors the safety issue.
Test and assessment procedures for passive pedestrian protection based on developments by the European Enhanced Vehicle-safety Committee (EEVC) have been introduced in world-wide regulations and consumer test programmes, with considerable harmonization between these programmes. Nevertheless, latest accident investigations reveal a stagnation of pedestrian fatality numbers on European roads running the risk of not meeting the European Union- goal of halving the number of road fatalities by the year 2020. The branch of external road user safety within the EC-funded research project SENIORS under the HORIZON 2020 framework programme focuses on investigating the benefit of modifications to pedestrian test and assessment procedures and their impactors for vulnerable road users with focus on the elderly. Injury patterns of pedestrians and cyclists derived from the German In-Depth Accident Study (GIDAS) show a trend of AIS 2+ and AIS 3+ injuries getting more relevant for the thorax region in crashes with newer cars (Wisch et al., 2017), while maintaining the relevance for head and lower extremities. Several crash databases from Europe such as GIDAS and the Swedish Traffic Accident Data Acquisition (STRADA) also show that head, thorax and lower extremities are the key affected body regions not only for the average population but in particular for the elderly. Therefore, the SENIORS project is focusing on an improvement of currently available impactors and procedures in terms of biofidelity and injury assessment ability towards a better protection of the affected body regions, incorporating previous results from FP 6 project APROSYS and subsequent studies carried out by BASt. The paper describes the overall methodology to develop revised FE impactor models. Matched human body model and impactor simulations against generic test rigs provide transfer functions that will be used for the derivation of impactor criteria from human injury risk functions for the affected body regions. In a later step, the refined impactors will be validated by simulations against actual vehicle front-ends. Prototyping and adaptation of test and assessment procedures as well as an impact assessment will conclude the work of the project at the final stage. The work will contribute to an improved protection of vulnerable road users focusing on the elderly. The use of advanced human body models to develop applicable assessment criteria for the revised impactors is intended to cope with the paucity of actual biomechanical data focusing on elderly pedestrians. In order to achieve optimized results in the future, the improved test methods need to be implemented within an integrated approach, combining active with passive safety measures. In order to address the developments in road accidents and injury patterns of vulnerable road users, established test and assessment procedures need to be continuously verified and, where needed, to be revised. The demographic change as well as changes in the vehicle fleet, leading to a variation of accident scenarios, injury frequencies and injury patterns of vulnerable road users are addressed by the work provided by the SENIORS project, introducing updated impactors for pedestrian test and assessment procedures.
The GRSP informal group on child restraint systems (CRS) finalised phase 1 of a new regulation for the homologation of CRS . This regulation is the subject of several discussions concerning the safety benefits and the advantages and disadvantages that certain specific points may bring. However, these discussions are sometimes not based on scientific facts and do not consider the whole package but only single items. Based on the experience of the CASPER partners in the fields of human behaviour, accident analysis, test procedures and biomechanics in the area of child safety, a consideration of the safety benefits of phase 1 of the new regulation and recommendations for phase 2 will be given.
A reduction of around 48% of all road fatalities was achieved in Europe in the past years including a reduced number of fatalities with an older age. However, among all road fatalities, the proportion of elderly is steadily increasing. In an ageing society, the European (Horizon2020) project SENIORS aims to improve the safe mobility of older road users, who have different transportation habits compared to other age groups. To increase their level of safe mobility by determining appropriate requirements for vehicle safety systems, the characteristics of current road traffic collisions involving the elderly and the injuries that they sustain need to be understood in detail. Hereby, the paper focuses on their traffic participation as pedestrian, cyclist or passenger car occupant. Following a literature review, several national and international crash databases and hospital statistics have been analysed to determine the body regions most frequently and severely injured, specific injuries sustained and types of crashes involved, always comparing older road users (65 years and more) with mid-aged road users (25-64 years). The most important crash scenarios were highlighted. The data sources included European statistics from CARE, data on national level from Germany, Sweden, Italy, United Kingdom and Spain as well as in-depth crash information from GIDAS (Germany), RAIDS (UK), CIREN and NASS-CDS (US). In addition, familiar hospital data from Germany (TraumaRegister DGU-®), Italy (Italian Register of Acute Traumas) and UK hospital statistics (TARN) were included in the study to gain further insight into specific injury patterns. Comprehensive data analyses were performed showing injury patterns of older road users in crashes. When comparing with mid-aged road users, all databases showed that the thorax body region is of particularly high importance for the older car occupant with injury severities of AIS 2 or AIS 3+, whereas the body regions lower extremities, head and thorax need to be considered for the older pedestrians and cyclists. Besides these comparisons, the most frequent and severe top 5 injuries were highlighted per road user group. Further, the most important crash configurations were identified and injury risk functions are provided per age group and road user group. Although several databases have been analysed, the picture on the road safety situation of older road users in Europe was not complete, as only Western European data was available. The linkage between crash data and hospital data could only be made on a general level as their inclusion criteria were quite different.
Supported by field accident data and monitoring results of European Regulation (EC) No. 78/2009, recent plans of the European Commission regarding a way forward to improve passive safety of vulnerable road users include, amongst other things, an extension of the head test area. The inclusion of passive cyclist safety is also being considered by Euro NCAP. Although passenger car to cyclist collisions are often severe and have a significant share within the accident statistics, cyclists are neither considered sufficiently in the legislative nor in the consumer ratings tests. Therefore, a test procedure to assess the protection potential of vehicle fronts in a collision with cyclists has been developed within a current research project. For this purpose, the existing pedestrian head impact test procedures were modified in order to include boundary conditions relevant for cyclists as the second big group of vulnerable road users. Based on an in-depth analysis of passenger car to cyclist accidents in Germany the three most representative accident constellations have been initially defined. The development of the test procedure itself was based on corresponding simulations with representative vehicle and bicycle models. In addition to different cyclist heights, reaching from a 6-year-old child to a 95%-male, also four pedal positions were considered. By reconstruction of a real accident the defined simulation parameters could be validated in advance. The conducted accident kinematics analysis shows for a large portion of the constellations an increased head impact area, which can reach beyond the roof leading edge, as well as high average values for head impact velocity and angle. Based on the simulation data obtained for the different vehicle models, cyclist-specific test parameters for impactor tests have been derived, which have been further examined in the course of head and leg impact tests. In order to study the cyclist accident kinematics under real test conditions, different full scale tests with a Polar-II dummy positioned on a bicycle have been conducted. Overall, the tests showed a good correlation with the simulations and support the defined boundary test conditions. Typical accident scenarios and simulations reveal higher head impact locations, angles and velocities. An extended head impact area with modified test parameters will contribute to an improved protection of vulnerable road users including cyclists. However, due to significantly differing impact kinematics and postures between the lower extremities of pedestrians and cyclists, these injuries cannot be addressed by the means of current test tools such as the flexible pedestrian legform impactor FlexPLI. Based on the findings obtained within the project as well as the existing pedestrian protection requirements a cyclist protection test procedure for use in legislation and consumer test programmes has been developed, whose requirements have been transferred into a corresponding test specification. This specification provides common head test boundary conditions for pedestrians and cyclists, whereby the existing requirements are modified and two parallel test procedures are avoided.
Rechtsfolgen zunehmender Fahrzeugautomatisierung : gemeinsamer Schlussbericht der Projektgruppe
(2012)
Die BASt-Projektgruppe "Rechtsfolgen zunehmender Fahrzeugautomatisierung" hat über die heute verfügbaren Fahrerassistenzsysteme hinaus drei verschiedene Automatisierungsgrade identifiziert und begrifflich definiert: Teil-, Hoch- und Vollautomatisierung. Aus verhaltensrechtlicher Sicht haben sich als wesentliche Unterscheidungsmerkmale verschiedener Automatisierungsgrade die auf das Verkehrsgeschehen fokussierte Aufmerksamkeit des Fahrers und seine ständige Möglichkeit zur Fahrzeugsteuerung herausgestellt. Im Fall der "Teilautomatisierung" ist die Aufmerksamkeit des Fahrers ständig auf das Verkehrsgeschehen gerichtet und er hat aufgrund der permanent von ihm durchzuführenden Systemüberwachung die Möglichkeit zur Fahrzeugsteuerung, so dass dieser Automatisierungsgrad den aktuellen verhaltensrechtlichen Anforderungen entspricht. Die verhaltensrechtlich geforderte Aufmerksamkeitskonzentration auf das Verkehrsgeschehen und die möglicherweise fehlende Möglichkeit zur Fahrzeugsteuerung stehen jedoch der Nutzung höherer Automatisierungsgrade (Hoch- und Vollautomatisierung) derzeit entgegen. Ihre Nutzung ist gegenwärtig nicht mit dem Verhaltensrecht vereinbar, da der menschliche Fahrzeugführer gegen seine Pflichten verstieße, wenn er sich vollständig auf das System verlassen würde. Soweit ein Automatisierungsgrad zugleich eine freihändige Fahrzeugsteuerung vorsieht, bedürfte es der verhaltenspsychologischen Untersuchung, inwieweit dies den Fahrer in der Ausübung ständiger Vorsicht im Sinne von -§ 1 Abs. 1 StVO zu beeinträchtigen vermag. Hinsichtlich der Haftung nach dem Straßenverkehrsgesetz erscheint die Beweislastverteilung im Rahmen von -§ 18 Abs. 1 S. 2 StVG in den Fällen höherer Automatisierungsgrade (Hoch- und Vollautomatisierung) nicht mehr sachgerecht, soweit dem Fahrer in verhaltensrechtlicher Hinsicht die Ausrichtung seiner Aufmerksamkeit auf andere Tätigkeiten als die konventionelle Fahraufgabe ermöglicht wird. Die Regelungen zur Haftung des Fahrzeughalters bleiben bei allen Automatisierungsgraden weiterhin anwendbar. In Bezug auf die Produkthaftung zeigt sich im Fall der vollständig fahrerüberwachten Teilautomatisierung die Bedeutung der Systemgrenzen. Produkthaftungsrechtlich gewinnt hier die Einordnung des bestimmungsgemäßen Gebrauchs wesentlich an Bedeutung. Zur Absicherung dieses bestimmungsgemäßen Gebrauchs ist die nachhaltige Beeinflussung der Verkehrserwartung beim Benutzerkreis entscheidend, soweit nicht primär konstruktive Möglichkeiten nach dem Stand von Wissenschaft und Technik zur Verfügung stehen, um unberechtigtes Systemvertrauen auszuschließen. Bei den höheren Automatisierungsgraden, die nicht mehr der Fahrerüberwachung bedürfen (unter der Annahme, ihre Nutzung wäre verhaltensrechtlich möglich), wäre jeder Schaden, der nicht auf ein Fehlverhalten Dritter oder eine Übersteuerung des Fahrers zurückzuführen ist, geeignet, Herstellerhaftung auszulösen. Diesbezüglich spielt die Darlegungs- und Beweislast eine wesentliche Rolle. Sowohl auf Grund der offenen Fragen in der rechtlichen Bewertung als auch übergreifend zur Verbesserung technischer Ausgangsbedingungen sowie der Gebrauchssicherheit wird von der Projektgruppe weiterer Forschungsbedarf zur Fahrzeugautomatisierung formuliert.