Filtern
Erscheinungsjahr
- 2013 (14) (entfernen)
Dokumenttyp
Schlagworte
- Vehicle (14) (entfernen)
Institut
For a number of EU regulatory acts Virtual Testing (VT) is already allowed for type approval (see Commission Regulation No. 371/2010 of 16 April 2010 amending the Framework Directive 2007/46/EC). However, only a very general procedure on how to apply VT for type approval is provided. Technical details for specific regulatory acts are not given yet. The main objective of the European project IMVITER (IMplementation of VIrtual TEsting in Safety Regulations) was to promote the implementation of VT in safety regulations. When proposing VT procedures the new regulation was taken into account, in particular, addressing open issues. Special attention was paid to pedestrian protection as pilot cases. A key aspect for VT implementation is to demonstrate that the employed simulation models are reliable. This paper describes how the Verification and Validation (V&V) method defined by the American Society of Mechanical Engineers was adapted for pedestrian protection VT based assessment. or the certification of headform impactors an extensive study was performed at two laboratories to assess the variability in calibration tests and equivalent results from a set of simulation models. Based on these results a methodology is defined for certification of headform impactor simulation models. A similar study was also performed with one vehicle in the type approval test setup. Its bonnet was highly instrumented and subjected to 45 impacts in five different positions at two laboratories in order to obtain an estimation of the variability in the physical tests. An equivalent study was performed using stochastic simulation with a metamodel fed with observed variability in impact conditions of physical headforms. An estimation of the test method uncertainty was obtained and used in the definition of a validation corridor for simulation models. Validation metric and criteria were defined in cooperation with the ISO TC22 SC10 and SC12 WG4 "Virtual Testing". A complete validation procedure including different test setups, physical magnitudes and evaluation criteria is provided. A detailed procedural flowchart is developed for VT implementation in EC Regulation No 78/2009 based on a so called "Hybrid VT" approach, which combines real hardware based head impact tests and simulations. This detailed flowchart is shown and explained within this paper. Another important point within the virtual testing based procedures is the documentation of relevant information resulting from the verification and validation process of the numerical models used. For this purpose report templates were developed within the project. The proposed procedure fixes minimum V&V requirements for numerical models to be confidently used within the type-approval process. It is not intended to be a thorough guide on how to build such reliable models. Different modeling methodologies are therefore possible, according to particular OEM know-how. These requirements respond to a balance amongst the type-approval stakeholders interests. A cost-benefit analysis, which was also performed within the IMVITER project, supports this approach, showing the conditions in which VT implementation is beneficial. Based on the experience gained in the project and the background of the experts involved an outlook is given as a roadmap of VT implementation, identifying the most important milestones to be reached along the way to a future vehicle type approval procedure supported by VT. The results presented in this paper show an important step addressing open questions and fostering the future acceptance of virtual testing in pedestrian protection type approval procedures.
Since 2008, the authors inspected fatal traffic accidents on the spot every year, with the cooperation of Toyota police station in Aichi pref. In the jurisdiction, numbers of fatal accidents were 18 in 2008, 12 in 2009, 14 accidents in 2010, and 16 in 2011. We here report the results of our analysis of information obtained by detailed inspection for those that occurred from 2008 to 2010. We focused on vehicle-to-pedestrian accidents, which accounted for about 45% of all accidents in 2008. Because many accidents occurred on residential roads not far from pedestrians" homes, it was revealed that the decrease of the collision speed by traffic calming such as humps and zone speed management, was highly effective. On the other hand, pedestrian detection technologies seemed to be also effective as a countermeasure on vehicle side. Every pedestrian position against a vehicle was clarified and TTC (Time to Collision) was calculated provisionally. Pedestrian accidents in intersections were also examined. Among the intersection pedestrian accidents within the jurisdiction, compared with the national average in Japan, the ratio of intersections without a signal and the ratio without a pedestrian crossing were high. According to the comparison of the Japanese traffic accident patterns between 2001 and 2008, pedestrian accidents during turning right and turning left did not decrease much. For elderly drivers, these accidents occurred very often. Finally, single vehicle accidents were analysed with the accident pattern analysis methods used above. There were high numbers of single vehicle accidents against object on single roads. Although fatal accidents against guardrails decreased, the numbers of fatal accidents against a utility pole and a sign pole were nearly constant. As for the impact with narrow width objects such as utility poles, the fatality rate was very high, and countermeasures of both road infrastructure and vehicles seem to be effective.
To improve vehicle safety in frontal collisions, the crash compatibility between the colliding vehicles is crucial. Compatibility aims to improve both the self and partner protection properties of vehicles. Although compatibility has received worldwide attention for many years, no final assessment approach has been defined. Within the Frontal Impact and Compatibility Assessment Research (FIMCAR) project, different frontal impact test procedures (offset deformable barrier [ODB] test as currently used for Economic Commission for Europe [ECE] R94, progressive deformable barrier test as proposed by France for a new ECE regulation, moveable deformable barrier test as discussed worldwide, full-width rigid barrier test as used in Federal Motor Vehicle Safety Standard [FMVSS] 208, and full-width deformable barrier test) were analyzed regarding their potential for future frontal impact legislation. The research activities focused on car-to-car frontal impact accidents based on accident investigations involving newer cars. Test procedures were developed with both a crash test program and numerical simulations. The proposal from FIMCAR is to use a full-width test procedure with a deformable element and compatibility metrics in combination with the current offset test as a frontal impact assessment approach that also addresses compatibility. By adding a full-width test to the current ODB test it is possible to better address the issues of structural misalignment and injuries resulting from high acceleration accidents as observed in the current fleet. The estimated benefit ranges from a 5 to 12 percent reduction of fatalities and serious injuries resulting from frontal impact accidents. By using a deformable element in the full-width test, the test conditions are more representative of real-world situations with respect to acceleration pulse, restraint system triggering time, and deformation pattern of the front structure. The test results are therefore expected to better represent real-world performance of the tested car. Furthermore, the assessment of the structural alignment is more robust than in the rigid wall test.
Teil 1, Informations- und Kommunikationstechniken zur Optimierung des Betriebsdienst-Managements: In vielen Arbeits- und Organisationsprozessen des Straßenbetriebsdienstes werden Informations- und Kommunikationstechnologien (IuK-Technologien) eingesetzt, um Arbeitsabläufe einfacher, besser und sicherer zu gestalten sowie umfassende Daten für die Abrechnung und weitere Planung bereit zu stellen. Die Potenziale der IuK-Technologien werden im Straßenbetriebsdienst häufig nur unvollständig genutzt. Ziel des FE-Vorhabens war die systematische Aufbereitung von Anforderungen und Möglichkeiten der IuK-Technologien. Die Anforderungen des Straßenbetriebsdienstes an den Einsatz der IuK-Technologien berücksichtigen neben der derzeitigen Praxis auch künftige Entwicklungen, die sich beispielsweise aus der Einführung der wirtschaftlichkeitsorientierten Steuerung des Betriebsdienstes ergeben. Damit IuK-Technologien erfolgreich betrieben werden können, ist neben Funktionalität und Qualität der technischen Komponenten auch die Berücksichtigung der organisatorischen und betrieblichen Abläufe im Straßenbetriebsdienst von großer Bedeutung. In den Untersuchungen zur mobilen Sprach- und Datenkommunikation wurde deutlich, dass bei Auslaufen des Analogfunks neben dem Aufbau eigenständiger Digitalfunknetze auch die Nutzung des kommerziellen Mobilfunks in Betracht gezogen werden sollte. Wesentliche Grundlagen für die wirtschaftliche Steuerung sind die automatisierte Einsatzdatenerfassung sowie ein umfassendes Bestandsdatenmanagement, wobei Bestandsobjekte auch mit Hilfe von RFID-Chips identifiziert werden können. Im Winterdienst sollten verstärkt berührungslose Sensoren für die Erfassung von Fahrbahntemperatur und "zustand zum Einsatz kommen. Salzmanagementsysteme ermöglichen u.a. die Überwachung von Streustoffvorräten an nicht besetzten Standorten sowie eine übergeordnete Logistik bei Lieferengpässen. Wichtig sind auch Systeme zur Unterstützung der Fahrer von Winterdienstfahrzeugen, durch die Einsätze anforderungsgerechter und flexibler erfolgen können. Es wurden auch innovative IuK-Technologien analysiert, die große Potentiale für den Straßenbetriebsdienst erkennen lassen. Hierzu zählen die mobile Erfassung des Straßenzustandes für den Winterdienst durch Einsatzfahrzeuge oder Fahrzeuge des Individualverkehrs, alternative Kommunikationswege für die Warnung der Verkehrsteilnehmer vor Arbeitsstellen im Verkehrsraum sowie das autonome Fahren von Absperr- und Vorwarnanhängern, durch das die Gefährdung des Personals im Verkehrsraum deutlich reduziert werden kann. Es besteht jedoch noch erheblicher Forschungs- und Entwicklungsbedarf, um diese Technologien effizient im Straßenbetriebsdienst einzusetzen sowie ihren Nutzen umfassend bewerten zu können. Teil 2, Autonomes Fahren für den Straßenbetriebsdienst: Mitarbeiter des Betriebsdienstes sind in Arbeitsstellen auf Autobahnen enormen Unfallgefahren ausgesetzt. Weiterhin erfordert die Sicherung von Arbeitsstellen kürzerer Dauer (AkD) einen hohen personellen und zeitlichen Aufwand. Das FE-Projekt "Informations- und Kommunikationstechniken zur Optimierung des Betriebsdienst-Managements" zeigte, dass die Anwendung autonomer Fahrzeuge im Betriebsdienst die Gefährdung des Personals im Verkehrsraum reduzieren kann. In Ergänzung dazu wurde der Entwicklungsansatz "Autonomes Fahren für den Straßenbetriebsdienst" konkretisiert. Eine untersuchte Minimallösung beinhaltet ein autonom fahrendes Absperrfahrzeug, welches einem Führungsfahrzeug auf der Autobahn folgt. In einem zweiten Gesamtkonzept ist die Automatisierung einer gesamten Absicherungskolonne mit Absperr- und Vorwarnfahrzeugen incl. der unbemannten Anfahrt zur Autobahn auf nicht öffentlichen Straßen vorgesehen. In der technischen Umsetzung handelt es sich bei den Einsatzszenarien der unbemannten Fahrzeuge um Formationsfahrten oder Folgefahrt-Szenarien auf der Autobahn. Unbemannte Fahrzeuge mit den dargestellten Funktionsweisen können deutliche Sicherheitssteigerungen für Betriebsdienstmitarbeiter bieten. Eine erste Abschätzung ergab, dass rund 70 % der Mitarbeiter, welche in AkD auf Autobahnen beim Aufenthalt in Fahrzeugen verunglücken, durch den Einsatz unbemannter Arbeitsstellensicherung geschützt werden können. Dies entspricht rund der Hälfte der insgesamt bei Unfällen in AkD verunglückten Mitarbeiter. Für die Realisierung unbemannter Sicherungsfahrzeuge sind viele technische Fragestellungen zu klären, insbesondere bezüglich der Prognose und Detektion von Fehlfunktionen. Für den Einsatz der vorgeschlagenen Systeme ist eine allgemeine Genehmigung für den täglichen Betrieb notwendig. Hierzu sind zahlreiche rechtliche Fragestellungen zu beantworten. Somit kann die Implementierung unbemannter Sicherungsfahrzeuge im Betriebsdienst als Pilotprojekt für unbemanntes Fahren im Allgemeinen bzw. in anderen Branchen dienen.
There is a need to continue to set the right vehicle safety policy priorities in the future. Research has to point out the most cost efficient and safety relevant measures to further reduce the number of road traffic casualties. The overall development shows that the constant and rapid decrease in the number of road casualties slows down. New innovations need to enter the vehicle market soon, in order to continue the success achieved in the last decade. Priorities for vehicle safety are driven by safety and mobility demands. It is necessary to keep a strong lid on all aspects of elderly and vulnerable road users. The fraction of powered-two-wheelers (PTW) is a priority group. PTWs have a risk of being involved in an accident, 14times higher than that of a passenger car. However, the figures do also show that every second fatality is a car occupant. Therefore passenger car safety remains to be top priority. Heavy goods vehicles are overly represented in fatal accidents, addressing the need to make these vehicles more compatible with other road users. These facts highlight the necessity not only to increase vehicles" self protection, but also to make cars - and trucks - more compatible and safe. Cycling is a strongly increasing mode of transport. This is a further reason to demand better protection for cyclists and pedestrians from car design and car active and integrated safety systems. Another priority for future vehicle safety is related to demographics. It is less known that the purely demographic effect will be superimposed by an increasing wish of elderly people to be mobile. However, elderly people show deficits concerning their biomechanics. This emphasizes the need for better and more adaptive restraint systems, but also further technological challenges and demands for active safety systems. However, in order to progress, current technological limitations have to be overcome. Cost benefit considerations, but also consumer acceptance and desires, will drive this process.
Jahresbericht 2011/2012
(2013)
Der Verkehr auf deutschen Straßen nimmt immer weiter zu. Einem auch in Zukunft gut funktionierenden, sicheren und ökonomisch wie ökologisch verträglichen System Straße widmet sich die Forschung der Bundesanstalt für Straßenwesen (BASt). Alle zwei Jahre berichtet die BASt über ihre Aufgaben, Forschungsprojekte und ausgewählte Themen der Verwaltung. Der aktuelle Bericht umfasst die Jahre 2011 und 2012. Auf 151 Seiten gibt er einen kleinen Einblick in die aktuelle Forschung zu wichtigen Themen des Straßenwesens. In den Projekten SKRIBT und SKRIBTPlus wurde das Verhalten von Autofahrerinnen und Autofahrern in Gefahrensituationen im Tunnel untersucht. Es stellte sich heraus, dass in solchen Situationen oft falsch und zu spät reagiert wird. Durch die gesammelten Daten konnten neue Konzepte entwickelt werden, die das Verhalten bei Gefahren in Tunneln verbessern. In Kraftfahrzeugen kamen zwar in den letzten Jahren neue Sicherheitssysteme zum Einsatz, die in Gefahrensituationen das Bremsverhalten verbessern. Bisher ist es jedoch für den Endverbraucher schwer, unterschiedliche Systeme zu vergleichen, da keine geeigneten Bewertungen herangezogen werden können. Im EU-Projekt ASSESS (Assessment of Integrated Vehicle Safety Systems for improved vehicle safety), an dem die BASt maßgeblich beteiligt ist, wurde deshalb an einem einheitlichen Verfahren zur Bewertung und an juristischen Fragenstellungen gearbeitet. Viele europäische Länder sind sich einig: Alkohol, Drogen und Medikamente im Straßenverkehr gefährden die Sicherheit auf Europas Straßen. Um sich ein genaueres Bild machen zu können und geeignete Gegenmaßnahmen zu entwickeln, bewilligte die Europäische Kommission das bisher größte Forschungsprojekt zur Verbesserung der Verkehrssicherheit: DRUID (Driving Under the Influence of Drugs, Alcohol and Medicines). An dem fünf Jahre dauernden und von der BASt koordinierten Projekt, beteiligten sich Institute aus 18 europäischen Ländern. Das Ergebnis ist eine umfassende Bestandsaufnahme sowie konkrete Maßnahmenvorschläge. Die Arbeit der BASt umfasst im großen Maße auch den Ausbau und Erhalt der gesamten Straßeninfrastruktur. Der Beitrag "Wie bauen wir in der Zukunft: Straßenbau ohne OEl?" geht beispielsweise der Frage nach, wie wir bei immer knapper werdenden und teuer zu bezahlenden Ressourcen unsere Straßen zukünftig erhalten und ausbauen werden. Auch die Aktion "auf" der Straße spielt eine große Rolle in der BASt. Seit Jahren zeichnet sich ein Mangel an Parkplätzen für Lkw an Bundesautobahnen ab. Um hier Abhilfe zu schaffen, hat die BASt einen neuen Steuerungsansatz entwickelt: Beim sogenannten Kompaktparken werden Kapazitäten erhöht und effektiver genutzt, indem Lkw in Reihe, nach ihrer geplanten Abfahrzeit, geparkt werden.
Within this paper different European accident data sources were used to investigate the causations and backgrounds of road traffic accidents with pedestrians. Analyses of high level national data and in-depth accident data from Germany and Great Britain was used to confirm and refine preliminary accident scenarios identified from other sources using a literature review. General observations made included that a high proportion of killed or seriously injured pedestrian casualties impacted by cars were in "dark" light conditions. Seven accident scenarios were identified (each divided into "daylight" and "dark" light conditions) which included the majority of the car front-to-pedestrian crash configurations. Test scenarios were developed using the identified accident scenarios and relevant parameters. Hypothetical parameters were derived to describe the performance of pedestrian pre-crash systems based on the assumption that these systems are designed to avoid false positives as a very high priority, i.e. at virtually all costs. As result, three "Base Test Scenarios" were selected to be developed in detail in the AsPeCSS project. However, further Enhanced Test Scenarios may be needed to address environmental factors such as darkness if it is determined that system performance is sensitive to these factors. Finally, weighting factors for the accident scenarios for Europe (EU-27) were developed by averaging and extrapolation of the available data. This paper represents interim results of Work Package 1 within the AsPeCSS project.
Although the number of road accident casualties in Europe (EU27) is falling the problem still remains substantial. In 2011 there were still over 30,000 road accident fatalities. Approximately half of these were car occupants and about 60 percent of these occurred in frontal impacts. The next stage to improve a car's safety performance in frontal impacts is to improve its compatibility. The objective of the FIMCAR FP7 EU-project was to develop an assessment approach suitable for regulatory application to control a car's frontal impact and compatibility crash performance and perform an associated cost benefit analysis for its implementation. This paper reports the cost benefit analyses performed to estimate the effect of the following potential changes to the frontal impact regulation: • Option 1 " No change and allow current measures to propagate throughout the vehicle fleet. • Option 2 " Add a full width test to the current offset Deformable Barrier (ODB) test. • Option 3 " Add a full width test and replace the current ODB test with a Progressive Deformable Barrier (PDB) test. For the analyses national data were used from Great Britain (STATS 19) and from Germany (German Federal Statistical Office). In addition in-depth real word crash data were used from CCIS (Great Britain) and GIDAS (Germany). To estimate the benefit a generalised linear model, an injury reduction model and a matched pairs modelling approach were applied. The benefits were estimated to be: for Option 1 "No change" about 2.0%; for Option 2 "FW test" ranging from 5 to 12% and for Option 3 "FW and PDB tests" 9 to 14% of car occupant killed and seriously injured casualties.
The objective was to develop and validate a crash trolley (reference vehicle) equipped with a compartment and a full restraint system for driver and front seat passenger which can be used in full scale crash testing. Furthermore, the crash trolley should have a suspension to show rotation and nick effects similar to real vehicles. Within the development phase the reference vehicle was build based on a European family car. Special attention was needed to provide appropriate strength to the trolley and its suspension. The reference vehicle is equipped with a restraint system consisting of airbags, pedals, seats, dashboard, and windscreen. On the front of the vehicle different crash barriers can be installed to provide miscellaneous deceleration pulses. For the validation phase a series of low and high speed crash tests with HIII dummies were conducted and compared with full scale tests. For the comparison deceleration pulse, dummy numbers and vehicle movement were analyzed. Validation tests with velocities up to 60 km/h showed promising results. The compartment and the suspension systems stayed stable. Rotation effects were comparable with full scale car crash tests. The airbags and seat belt system worked reasonable. The acceleration pulse compared to an Euro NCAP test had a similar characteristic but was in general slightly lower. After the successful validation the reference vehicle is already in use in different studies in the field of vehicle safety research at BASt.
In Germany the number of casualties in passenger car to pedestrian crashes has been reduced by a considerable amount of 40% as regards fatalities and 25% with regard to seriously injured pedestrians since the year 2001. Similar trends can be seen in other European countries. The reasons for that positive development are still under investigation. As infrastructural or behavioral changes do in general take a longer time to be effective in real world, explanations related to improved active and passive safety of passenger vehicles can be more relevant in providing answers for this trend. The effect of passive pedestrian protection " specified by the Euro NCAP pedestrian test result " is of particular interest and has already been analyzed by several authors. However, the number of vehicles with some valid Euro NCAP pedestrian score (post 2002 rating) was quite limited in most of those studies. To overcome this problem of small datasets German National Accident Records have been taken to investigate a similar objective but now based on a much bigger dataset. The paper uses German National Accident Records from the years 2009 to 2011. In total 65.140 records of pedestrian to passenger car crashes have been available. Considering crash parameters like accident location (rural / urban areas) etc., 27.143 of those crashes have been classified to be relevant for the analysis of passive pedestrian safety. In those 27.143 records 7.576 Euro NCAP rated vehicles (post 2002 rating) have been identified. In addition it was possible to identify vehicles which comply with pedestrian protection legislation (2003/102/EG) where phase 1 came into force in October 2005. A significant correlation between Euro NCAP pedestrian score and injury outcome in real-life car to pedestrian crashes was found. Comparing a vehicle scoring 5 points and a vehicle scoring 22 points, pedestrians" conditional probability of getting fatally injured is reduced by 35% (from 0.58% to 0.37%) for the later one. At the same time the probability of serious injuries can be reduced by 16% (from 27.4% to 22.9%). No significant injury reducing effect, associated with the introduction of pedestrian protection legislation (phase 1) was detected. Considerable effects have also been identified comparing diesel and gasoline cars. Higher engine displacements are associated with a lower injury risk for pedestrians. The most relevant parameter has been "time of accident", whereas pedestrians face a more than 2 times higher probability to be fatally injured during night and darkness as compared to daytime conditions.