Filtern
Erscheinungsjahr
- 2015 (124) (entfernen)
Dokumenttyp
- Buch (Monographie) (62)
- Konferenzveröffentlichung (56)
- Wissenschaftlicher Artikel (2)
- Bericht (2)
- Arbeitspapier (2)
Schlagworte
- Germany (104)
- Deutschland (101)
- Research report (56)
- Forschungsbericht (55)
- Conference (41)
- Konferenz (41)
- Test (31)
- Versuch (29)
- Unfall (24)
- Accident (22)
Road accidents are typically analyzed to address influences of human, vehicle, and environmental (primarily infrastructure) factors. A new methodology, based on a "Venn diagram" analysis, gives a broader perspective on the probable factors, and combinations of factors, contributing both to the occurrence of a crash and to sustaining injuries in that crash. The methodology was applied to 214 accidents on the Mumbai-Pune expressway. Factors contributing to accidents and injuries were addressed. The major human factors influencing accidents on this roadway were speeding (30%) and falling asleep (29%), while injuries were primarily due to lack of seat belt use (46%). The leading infrastructure factor for injuries was impact with a roadside manmade structure (28%), and the main vehicle factor for injuries was passenger compartment intrusion (73%). This methodology can help identify effective vehicle and infrastructure-related solutions for preventing accidents and mitigating injuries in India.
Injury severity of e.g. pedestrians or bikers after crashes with cars that are reversing is almost unknown. However, crash victims of these injuries can frequently be seen in emergency departments and account for a large amount of patients every year. The objective of this study is to analyze injury severity of patients that were crashed into by reversing cars. The Hannover Medical School local accident research unit prospectively documented 43,000 road traffic accidents including 234 crashes involving reversing cars. Injury severity including the abbreviated injury scale (AIS) and the maximum abbreviated injury scale (MAIS) was analyzed as well as the location of the accident. As a result 234 accidents were included into this study. Pedestrians were injured in 141 crashes followed by 70 accidents involving bikers. The mean age of all crash victims was 57 -± 23 years. Most injuries took place on straight stretches (n = 81) as well as parking areas (n = 59), entries (n = 36) or crossroads (n = 24). The AIS of the lower extremities was highest followed by the upper extremities. The AIS of the neck was lowest. The mean MAIS was 1.3 -± 0.6. The paper concludes that the lower extremities show the highest risk to become injured during accidents with reversing cars. However, the risk of severe injuries is likely low.
Ruptures and dissections of the thoracic and abdominal aortic vessel caused by traffic accidents are rare but potentially life-threatening injuries. They can occur by blunt trauma via seat belt or dashboard injury. The study aimed at evaluating the overall mortality, morbidity, neurological disorders, and differences in operative procedures of open repair and stenting. It shows that, with a change and improvement in diagnostic tools and surgical approach, mortality and morbidity of blunt aortic injuries were significantly reduced. Still an immediate life-threatening injury early diagnosis via multiple-slice and scans and surgical repair with minimally invasive stents showed excellent short-time results for selected patients.
Assessment of the effectiveness of Intersection Assistance Systems at urban and rural accident sites
(2015)
An Intersection Collision Avoidance System is a promising safety system for accident avoidance or injury mitigation at junctions. However, there is still a lack of evidence of the effectiveness, due to the missing real accident data concerning Advanced Driver Assistance Systems. The objective of this study is the assessment of the effectiveness of an Intersection Collision Avoidance System based on real accidents. The method used is called virtual pre-crash simulation. Accidents at junctions were reconstructed by using the numerical simulation software PC-Crashâ„¢. This first simulation is called the baseline simulation. In a second step the vehicles of these accidents were equipped with an Intersection Collision Avoidance System and simulated again. The second simulation is called the system simulation. In the system simulation two different sensors and four different intervention strategies were used, based on a time-to-collision approach. The effectiveness of Intersection Collision Avoidance System has been evaluated by using an assessment function. On average 9% of the reviewed junction accidents could have been avoided within the system simulations. The other simulation results clearly showed a change in the principal direction of force, delta-v and reduction of the injury severity.
The main focus of the benefit estimation of advanced safety systems with a warning interface by simulation is on the driver. The driver is the only link between the algorithm of the safety system and the vehicle, which makes the setup of a driver model for such simulations very important. This paper describes an approach for the use of a statistical driver model in simulation. It also gives an outlook on further work on this topic. The build-up process of the model suffices with a distribution of reaction times and a distribution of reaction intensities. Both were combined in different scenarios for every driver. Each scenario has then a specific probability to occur. To use the statistical driver model, every accident scene has to be simulated with each driver scenario (combinations of reaction times and intensities). The results of the simulations are then combined regarding the probabilities to occur, which leads to an overall estimated benefit of the specific system. The model works with one or more equipped participants and delivers a range for the benefit of advanced safety systems with warning interfaces.
Event data recorders (EDRs) are a valuable tool for in-depth investigation of traffic accidents. EDRs are installed on the airbag control module (ACM) to record vehicle and occupant information before, during, and after a crash event. This study evaluates EDR characteristics and aims at better understanding EDR performance for the improvement of accident reconstruction with more reliable and accurate information regarding accidents. The analysis is based on six crash tests with corresponding EDR datasets.
The study aimed at estimating the impact of pedelecs (with an assumed higher speed than bicycles) on the traffic accident severity in Germany for different penetration rates. The analysis shows that in many real situations (68%) an electrical support of bicycles has no influence on the sequence of accident events. Taking into account a number of unreported "single bicycle accidents", the adoption of similar traffic behavior and similar age distribution, the authors determined a shift of 400 former slightly to seriously injured cyclists in Germany per year. Overall this would be an increase of approximately 2.3% in case of 10% of pedelec penetration with the pessimistic assumption of 10 km/h speed increase although first natural driving studies predict a much lower average speed increase of pedelecs. The hypothesis verbalized in the initial question whether a higher distribution of pedelecs will result in more severe accidents in Germany is not verified. The study shows that electrical support didn"t result in higher collision speed in general. In many accident situations, the speed of pedelecs has only a minor influence on the accident severity. Further research focusing on a possible change of driver behavior especially in new target groups (elderly people) will be needed.
The Traffic Accident Research Institute at University of Technology Dresden investigates about 1,000 accidents annually in the area around and in Dresden. These datasets have been summarized and evaluated in the GIDAS (German Accident In-Depth Study) project for 13 years. During the project it became apparent that the specific traffic situation of a covert exit of a passenger car and an intersecting two-wheeler involves a high risk potential. This critical situation develops in a large part due to the lack of visibility between the driver and the intersecting bike. In this paper the accident avoidance potential of front camera systems with lateral field of view, which allows the driver to have an indirect sight into the crossing street area will be presented.
In North America, frontal crash tests in both the regulatory environment and consumer-based safety rating schemes have historically been based on full-width and moderate-overlap (40%) vehicle to barrier impacts. The combination of improved seat-belt technologies, notably belt tensioning and load limiting systems, together with advanced airbags, has proven very effective in providing occupant protection in these crash modes. Recently, however, concern has been raised over the contribution of narrower frontal impacts, involving primarily the vehicle corners, to the incidence of fatality and serious injury as a result of the potential for increased occupant compartment intrusion and performance limitations of current restraint systems. Drawing on data documented in the National Automotive Sampling System (NASS)/ Crashworthiness Data System (CDS) for calendar years 1999 to 2012, the present study examines the characteristics of existing and proposed corner crash test configurations, and the nature of real-world collisions that approximate the test environments. In this analysis, particular emphasis is placed on crash pulse information extracted from vehicle-based event data recorders (EDR's).
Analysis of pedestrian leg contacts and distribution of contact points across the vehicle front
(2015)
Determining the risk to pedestrians that are impacted by areas of the front bumper not currently regulated in type-approval testing requires an understanding of the target population and the injury risk posed by the edges of the bumper. National statistics show that approximately 10% of all accident casualties are pedestrians, with 20% to 30% of these pedestrian casualties being killed or seriously injured. However, the contact position across the front of the bumper is not recorded in national statistics and so in-depth accident databases (OTS, UK and GIDAS, Germany) were used to examine injury risk in greater detail. The results showed that some injury types and severities of injuries appear to peak around the bumper edges. Although there are sometimes inconsistencies in the data, generally there is no evidence to suggest that the edges of the bumper are less likely to be contacted or cause injury.
Many safety-relevant tasks in control or diagnostics require binary choices such as "conflict versus separation" in air traffic control, "normal versus pathological" when interpreting x-ray pictures, or "permitted versus forbidden" when inspecting airport security scans. Deciders often are uncertain, but nevertheless required to decide between two alternatives, that is, they have not only to decide upon an action, but also about the admissible level of uncertainty. If the accepted level of judgment certainty is not taken into account, the sequence of decisions does not capture the full picture of the underlying decision process. Differences in judgment certainty are relevant, because they reflect not only the adequacy of the human-machine interface that is evaluated, but also the differences in expertise of the decider and the requirements of the actual situation or task. Therefore, capturing both judgment certainty and discrimination performance is essential. A comparison of different human-machine-interfaces (for air traffic control) is used to illustrate a methodological approach, which allows for integrated analyses of decision processes based on receiver-operator-characteristics and practical guidelines for the evaluation of human-machine-interfaces for safety-relevant operation procedures are provided.
Detailed anthropometric data of pregnant women have been collected and used in the development of a computational model of the pregnant occupant model "Expecting". The model is complete with a finite element uterus and multi-body fetus, which is a novel feature in the models of this kind. The computational pregnant occupant model has been validated and used to simulate a range of impacts. The strains developed in the utero-placental interface are used as the main criteria for fetus safety. Stress distributions due to inertial loading of the fetus on the utero-placental interface play a role on the strain levels. Inclusion of fetus model is shown to significantly affect the strain levels in the utero-placental interface. This series of studies has led to the design of seatbelt features specifically for the pregnant women to enable them use the seatbelt correctly and comfortably.
SEEKING is looking for answers regarding electric powered bicycles and their relation to traffic safety issues. Does a cyclist need "E"? Is it as risky as riding a moped or are E-bikes creating conflicts with other cyclists? The project described herein, funded by the Austrian Ministry of Transport, has the aim of seeking answers to these hot topics. The SEEKING-team shows an in-depth investigation of vehicle dynamic sensing, together with subjective feedback of test riders to detect similarities and differences between conventional cycling and E-biking. Following an overview on the international status quo, measurement runs and their analyses are performed to find a set of preventative measures to make (E-)biking safer. A specific focus is the detection of curve handling, stopping and acceleration phases as well as conflict studies on course-based test rides and "real world" tests on cycling paths (naturalistic riding).
Aufgabe der Studie war eine erstmalige umfassende Erhebung der Ausstattung der Pkw in Deutschland mit Fahrzeugsicherheitssystemen. Dazu wurden 5.070 Haushalte zur Ausstattung eines ihnen zur Verfügung stehenden Fahrzeugs befragt. Für die Befragung wurden 53 Fahrzeugsicherheitssysteme ausgewählt. Darunter sind neue Systeme wie Stauassistenten und Kreuzungsassistenten sowie auch weitgehend etablierte Systeme wie die Fahrdynamikregelung (ESP) und Airbags. Neben den Nutzern wurden auch Experten befragt, die beruflich mit dem Ein- oder Verkauf von Pkw für Unternehmensflotten befasst sind. Diese zehn qualitativen Interviews geben einen Einblick in die Bedeutung verschiedener Kriterien bei der Fahrzeugwahl und speziell den Stellenwert von Fahrzeugsicherheitssystemen. Die weiteste Verbreitung haben passive Sicherheitssysteme wie Airbags, die darauf abzielen, die Folgen eines Unfalls für die Beteiligten abzumildern. Aber auch aktive und intervenierende Systeme, die Risiken vermeiden oder einzelne Fahraufgaben übernehmen, gehören häufig zur Fahrzeugausstattung. Die häufigsten Vertreter aus dieser Gruppe sind der Bremsassistent, ESP und der Tempomat. Die meisten Fahrzeugsicherheitssysteme sind in Fahrzeugen der oberen Mittelklasse und Oberklasse zu finden. Mit der jährlichen Fahrleistung und der Nutzungshäufigkeit nimmt die Anzahl der Sicherheitssysteme ebenso zu wie bei jüngeren Fahrzeugen und Dienstwagen. Die Ergebnisse zeigen ein Muster: Sind Systeme insgesamt selten, unterscheiden sich die Anteile innerhalb der verschiedenen Fahrzeugsegmente teilweise erheblich. Neue Systeme sind dann in den Fahrzeugen der oberen Mittelklasse und Oberklasse deutlich häufiger zu finden und in den Minis und Kleinwagen teilweise mit nicht messbaren Anteilen. Die Experteninterviews, die mit Flottenbetreibern und Fahrzeugverkäufern geführt wurden, zeigen, dass solche Fahrzeugsicherheitssysteme in die Standardausstattung aufgenommen werden, deren Nutzen nachgewiesen ist.
Die Dichte des Netzes an Glättemeldeanlagen (GMA) an Bundesautobahnen ist wesentlich höher als im nachgeordneten Netz. Eine Verdichtung des Messstellennetzes analog zu Bundesautobahnen ist jedoch aus finanziellen und organisatorischen Gründen nicht realisierbar. Ziel der Forschungsvorhaben ist daher die vereinfachte Erfassung von winterlichen Fahrbahn- und Witterungszuständen, um eine wesentliche Verdichtung des Messstellennetzes unter wirtschaftlich akzeptablen Bedingungen zu ermöglichen. Hierdurch soll den Winterdienstverantwortlichen eine netzweite Beurteilung des Streckenzustandes ermöglicht werden, um die Winterdiensteinsätze anforderungsgerechter und wirtschaftlicher durchführen zu können. Im Rahmen einer Lebenszykluskostenanalyse wurden Investitions- und Betriebskostendaten von über 200 GMA ausgewertet. Die Analyse ergab durchschnittliche Investitionskosten von 38.300 € je Messstelle. Diese Kosten werden hauptsächlich durch die Art der Stromversorgung (netzgebunden/autark) sowie den Umfang und die Art der Sensorik beeinflusst. Die bei Energieverbrauchsmessungen an bestehenden GMA erfassten Daten zeigen, dass GMA teils stark unterschiedliche Leistungsverbräuche besitzen, eine energieoptimierte Ausstattung jedoch eine wirtschaftlich akzeptable autarke Energieversorgung ermöglicht. Im Winter 2011/2012 wurden in drei Meistereien Einsatzentscheidungen untersucht. GMA sind hierbei die wichtigste Informationsquelle; sie werden in über 60 % aller Entscheidungen herangezogen. Luft- und Fahrbahnoberflächentemperatur sind die wichtigsten Parameter. Große Bedeutung für die Nutzer hat vielfach auch ein Kamerabild. Wesentlich für einen wirtschaftlichen Betrieb von GMA und einen gleichbleibenden Nutzen für die Anwender ist eine hohe Zuverlässigkeit in die angezeigten Messdaten. Daher sollte die Qualitätssicherung bei Installation und laufendem Betrieb größere Bedeutung gewinnen, indem durch die Straßenbauverwaltungen neben der regelmäßigen Wartung und Kalibrierung standardisierte Abnahme- und regelmäßige Kontrollprüfungen auf Grundlage der geltenden technischen Normen vorgesehen werden.
Jahresbericht 2013/2014
(2015)
Um den Straßenverkehr in Deutschland weiterhin sicher gestalten und aufrecht erhalten zu köennen, braucht es anwendungsnahe Forschung in den unterschiedlichen Fachdisziplinen des Straßenwesens. In der Bundesanstalt für Straßenwesen sind sämtliche Disziplinen zu Hause: Fahrzeugtechnik ebenso wie Straßenverkehrs- und -bautechnik, Brücken- und Ingenieurbau in enger Verzahnung mit der Unfallforschung und der wissenschaftlichen Erkenntnis zum menschlichen Verhalten im Straßenverkehr. Eine bedarfsgerechte Verkehrspolitik und der Wille zur Verbesserung der Verkehrssicherheit setzt eine objektive wissenschaftliche Fachexpertise voraus. Im Jahresbericht 2013/2014 stellt die BASt aus den Themenbereichen "Verkehrssicherheit: Der Mensch im Mittelpunkt", "Fahrzeugtechnik: Neue Systeme und Wege", "Verkehrstechnik: Konzepte, Maßnahmen und Statistik unter der Lupe", "Umwelt: Lebensraum schützen und Straßenverkehr nachhaltig gestalte", "Infrastruktur: Sichere Bauwerke und Straßen für die Zukunft" sowie "Straßenbau: Optimierte Beläge und Zustandsbewertung" aktuelle Forschungsarbeiten ihres Hauses vor. Fakten und Zahlen unter anderem zum Personal, Haushalt und Qualitätsmanagement sowie zur Internationalen Zusammenarbeit und Presse und Öffentlichkeitsarbeit ergänzen den Bericht.
This study aimed at prediction of long bone fractures and assessment of lower extremity injury mechanisms in real world passenger car to pedestrian collision. For this purpose, two pedestrian accident cases with detail recorded lower limb injuries were reconstructed via combining MBS (Multi-body system) and FE (Finite element) methods. The code of PC Crash was used to determine the boundary conditions before collision, and then MBS models were used to reproduce the pedestrian kinematics and injuries during crash. Furthermore, a validated lower limb FE model was chosen to conduct reconstruction of injuries and prediction of long bone fracture via physical parameters of von Mises stress and bending moment. The injury outcomes from simulations were compared with hospital recorded injury data and the same long bone fracture patterns and positions can be observed. Moreover, the calculated long bone fracture tolerance corresponded to the outcome from cadaver tests. The result shows that FE model is capable to reproduce the dynamic injury process and is an effective tool to predict the risk of long bone fractures.
Cycling supports the independence and health of the aging population. However, elderly cyclists have an increased injury risk. The majority of injured cyclists is victim of a single-sided accident, an accident in which there is no other party involved. The aim of the project "Safe and Aware on the bicycle" is to develop guidelines for an advisory system that is useful in preventing single-sided accidents. This system is able to support the elderly cyclist; enabling the cyclist to timely adapt his cycling behaviour and improve cycling safety and comfort. For the development of such advisory system the causes of singles accidents and the wishes of the elderly cyclist must be known. First step to obtain this insight was a literature survey and an GIDAS research. Unfortunately accidentology research with GIDAS did not give the full understanding of the pre-crash situations and (especially the behaviour related) factors leading to the accident. The second step was consultation of elderly cyclist through a questionnaire (n=800), in-depth interviews (n=12) and focus group sessions (n=15). This offered complementary information and a much better understanding of the behavioural aspects. Results concern the behaviour in traffic and identify specific physical (i.e. problems looking backwards over the shoulder) and mental issues. Furthermore, the needs and wishes for support in specific cycling situations were identified. In conclusion; The GIDAS results together with the information obtained contacting the elderly cyclists enabled setting up requirements for an advisory system, which is useful in preventing single-sided accidents.
Die Feststellung empirisch belegten Alkoholkonsums bei Kindern und Jugendlichen, aber nur rudimentärer Dokumentation entsprechender Verkehrsunfälle begründete die vorliegende Untersuchung. Qualitative mündliche Befragungen von Experten und Jugendlichen, Feldbeobachtungen und quantitative schriftliche Befragungen von Jugendlichen führten zu folgenden Ergebnissen: Etwa 65 % der schriftlich befragten 12- bis 22-Jährigen waren vor dem 18. Lebensjahr mindestens einmal im Monat übermäßig alkoholisiert mobil. Mit durchschnittlich 15 Jahren findet nicht nur der erste übermäßige Alkoholkonsum statt, sondern auch die ersten Situationen alkoholisierter Mobilität, vorrangig bei männlichen Jugendlichen. Wenngleich nur rd. 5 % der Befragten eine erlebte gefährliche Verkehrssituation als "echten" Verkehrsunfall bezeichneten, verwiesen immerhin etwa 27 % auf mindestens eine gefährliche Verkehrssituation unter Alkoholeinfluss vor dem 18. Lebensjahr. Von den insgesamt 349 berichteten gefährlichen Verkehrssituationen gingen 113 mit leichten und 24 mit schweren Verletzungen einher. Aber auch die Nichtverletzten verwiesen auf zahlreiche erlebte Gefahren bei ihrer Mobilität unter Alkoholeinfluss. Vorrangig männliche Jugendliche erleben solche Situationen mit durchschnittlich 15,7 Jahren. In mehr als der Hälfte der gefährlichen Verkehrssituationen unter Alkoholeinfluss waren die Akteure alleine unterwegs. Die alkoholisierten Kinder und Jugendlichen verunfallten zumeist als Fahrradfahrer und Fußgänger. In rd. 40 % der Fälle erfolgte eine medizinische Versorgung, von nur rd. 20% dieser Alkoholunfälle erlangt die Polizei Kenntnis. Unterstrichen wird die Notwendigkeit weiterer, differenzierender Untersuchungen, um die explorativ gewonnenen Erkenntnisse zu verifizieren und geeignete Präventionsmaßnahmen zu begründen. Inhaltlich und aufwandsökonomisch wird die ressortübergreifende Zusammenarbeit mit der Bundeszentrale für gesundheitliche Aufklärung empfohlen.
Since a number of human models have been developed it appears sensible to use these models also in the accident analysis. Especially the understanding of injury mechanisms and probably even injury risk curves can be significantly improved when interesting accidents are reconstructed using human body models. However, an important limitation for utilising human models for accident reconstruction is the effort needed to develop detailed FE models of the accident partners or to prepare the human model reconstruction by running physical accident reconstructions. The proposed approach for using human models for accident reconstruction is to use simplified and parametric car models. These models can be adapted to the crash opponents in a fast and cost effective way. Although, accuracy is less compared to detailed FE models, the relevant change in velocity can be simulated well, indicating that the computation of a detailed crash pulse is not needed. Two frontal impact test accidents that were reconstructed experimentally and using the parametric car models are indicating sufficient correlation of the adapted parametric car models with the full scale crash reconstructions. However, further developments of the parametric models to be capable for the use in lateral impacts and rear impacts are needed. For the PC Crash simulation runs the output sampling rate is too large to allow sufficient analysis. In addition the performance appears to be too general.