Konferenzveröffentlichung
Filtern
Erscheinungsjahr
Dokumenttyp
- Konferenzveröffentlichung (637) (entfernen)
Schlagworte
- Conference (386)
- Konferenz (382)
- Germany (212)
- Deutschland (209)
- Unfall (188)
- Accident (187)
- Safety (123)
- Sicherheit (122)
- Injury (117)
- Verletzung (117)
- Unfallrekonstruktion (90)
- Bewertung (82)
- Evaluation (assessment) (79)
- Statistics (73)
- Statistik (72)
- Vehicle (72)
- Analyse (math) (71)
- Fahrzeug (71)
- Schweregrad (Unfall, Verletzung) (71)
- Analysis (math) (70)
- Severity (accid, injury) (69)
- Fußgänger (65)
- Pedestrian (65)
- Test method (63)
- Prüfverfahren (62)
- Simulation (62)
- Tödlicher Unfall (62)
- Fatality (61)
- Driver (60)
- Reconstruction (accid) (60)
- Datenbank (58)
- Test (58)
- Unfallverhütung (58)
- Fahrer (57)
- Versuch (57)
- injury) (53)
- Accident prevention (52)
- Datenerfassung (52)
- Data acquisition (51)
- Verletzung) (51)
- Schweregrad (Unfall (50)
- Car (49)
- Europa (49)
- Europe (49)
- Severity (accid (49)
- Anfahrversuch (48)
- Collision (47)
- On the spot accident investigation (47)
- Untersuchung am Unfallort (45)
- Ursache (45)
- Zusammenstoß (45)
- Cause (44)
- Active safety system (41)
- Impact test (veh) (41)
- Radfahrer (41)
- Frontalzusammenstoß (40)
- Passives Sicherheitssystem (40)
- Aktives Sicherheitssystem (39)
- Data bank (38)
- Head on collision (38)
- Cyclist (37)
- Fahrerassistenzsystem (37)
- Richtlinien (37)
- Risiko (37)
- Specifications (37)
- Passive safety system (36)
- Leistungsfähigkeit (allg) (35)
- Method (35)
- Risk (35)
- Geschwindigkeit (34)
- Improvement (34)
- Prevention (34)
- Verfahren (34)
- Driver assistance system (33)
- Speed (33)
- Verbesserung (33)
- Efficiency (32)
- Accident reconstruction (30)
- Behaviour (30)
- Legislation (30)
- Verhalten (30)
- Driving aptitude (29)
- Gesetzgebung (29)
- Insasse (28)
- Alte Leute (27)
- Kind (27)
- Measurement (27)
- Motorcyclist (27)
- Motorradfahrer (27)
- Bridge (26)
- Child (26)
- Messung (26)
- Old people (26)
- Pkw (26)
- Anthropometric dummy (24)
- Dummy (24)
- Fahrzeugführung (24)
- Vehicle occupant (24)
- Verminderung (23)
- Berechnung (22)
- Development (22)
- Entwicklung (22)
- Forschungsarbeit (22)
- Accident rate (21)
- Biomechanics (21)
- Biomechanik (21)
- Brücke (21)
- Calculation (21)
- Decrease (21)
- Driving (veh) (21)
- EU (21)
- Interview (21)
- PKW (21)
- Planning (21)
- Research project (21)
- Traffic (21)
- Verkehr (21)
- Erziehung (20)
- Planung (20)
- Seitlicher Zusammenstoß (20)
- Unfallhäufigkeit (20)
- Verhütung (20)
- Belastung (19)
- Benutzung (19)
- Brustkorb (19)
- Droge (19)
- Drugs (19)
- Education (19)
- Load (19)
- Prognose (19)
- Risikobewertung (19)
- Sicherheitsgurt (19)
- Side impact (19)
- Use (19)
- Database (18)
- Lorry (18)
- Risk assessment (18)
- Fahranfänger (17)
- Fahrtauglichkeit (17)
- Head (17)
- International (17)
- Kopf (17)
- Motorrad (17)
- Recently qualified driver (17)
- Thorax (17)
- Dauerhaftigkeit (16)
- Deformation (16)
- Durability (16)
- Forecast (16)
- Motorcycle (16)
- Rechenmodell (16)
- Repair (16)
- Safety belt (16)
- Standardisierung (16)
- Tunnel (16)
- Unterhaltung (16)
- Auffahrunfall (15)
- Digital model (15)
- Drunkenness (15)
- Leg (human) (15)
- Maintenance (15)
- Mathematical model (15)
- Medical aspects (15)
- Medizinische Gesichtspunkte (15)
- Modification (15)
- Numerisches Modell (15)
- Rear end collision (15)
- Road construction (15)
- Sachschaden (15)
- Straßenbau (15)
- Trunkenheit (15)
- Verformung (15)
- Verkehrsinfrastruktur (15)
- Arzneimittel (14)
- Bemessung (14)
- Damage (14)
- Driver training (14)
- Error (14)
- Highway (14)
- Medication (14)
- Norm (tech) (14)
- Road network (14)
- Straße (14)
- Straßennetz (14)
- Veränderung (14)
- Adolescent (13)
- Airbag (13)
- Construction (13)
- Design (overall design) (13)
- Einstellung (psychol) (13)
- Human factor (13)
- Illness (13)
- Information (13)
- Instandsetzung (13)
- Jugendlicher (13)
- Krankheit (13)
- Lkw (13)
- Menschlicher Faktor (13)
- Metal bridge (13)
- Politik (13)
- Stahlbrücke (13)
- Standardization (13)
- Transport infrastructure (13)
- Verkehrsteilnehmer (13)
- Antikollisionssystem (12)
- Ausrüstung (12)
- Bau (12)
- Bremsung (12)
- Detection (12)
- Driver information (12)
- Equipment (12)
- Fahrausbildung (12)
- Fahrzeugsitz (12)
- Fehler (12)
- Impact study (12)
- Kontrolle (12)
- Medizinische Untersuchung (12)
- Policy (12)
- Road user (12)
- Schutzhelm (12)
- Skill (road user) (12)
- Wirtschaftlichkeitsrechnung (12)
- Überschlagen (12)
- Attitude (psychol) (11)
- Bein (menschl) (11)
- Braking (11)
- Collision avoidance system (11)
- Condition survey (11)
- Cost benefit analysis (11)
- Crash helmet (11)
- Expert opinion (11)
- Gutachten (11)
- Knotenpunkt (11)
- Medical examination (11)
- Orthotropic plate (11)
- Rigid pavement (11)
- Seat (veh) (11)
- Steifigkeit (11)
- Stiffness (11)
- Verwaltung (11)
- Administration (10)
- Age (10)
- Air pollution (10)
- Alter (10)
- Autobahn (10)
- Autonomes Fahren (10)
- Autonomous driving (10)
- Betonstraße (Oberbau) (10)
- Cracking (10)
- Earthworks (10)
- Fahrerinformation (10)
- Kompatibilität (10)
- Lebenszyklus (10)
- Luftverunreinigung (10)
- Nitrogen oxide (10)
- Overturning (veh) (10)
- Rissbildung (10)
- Sensor (10)
- Surfacing (10)
- Surveillance (10)
- Technologie (10)
- Technology (10)
- Tragfähigkeit (10)
- Vehicle regulations (10)
- Weather (10)
- Zustandsbewertung (10)
- Air bag (restraint system) (9)
- Austria (9)
- Automatisch (9)
- Bearing capacity (9)
- Blood alcohol content (9)
- Blutalkoholgehalt (9)
- Boden (9)
- Chemical analysis (9)
- Classification (9)
- Compatibility (9)
- Concrete (9)
- Detektion (9)
- Erdarbeiten (9)
- Front (9)
- Interior (veh) (9)
- Japan (9)
- Krankenhaus (9)
- Life cycle (9)
- Lärm (9)
- Motorway (9)
- Noise (9)
- Organisation (9)
- Soil (9)
- Specification (standard) (9)
- Stickoxid (9)
- Straßenverkehr (9)
- Technische Vorschriften (Kraftfahrzeug) (9)
- Umwelt (9)
- Wirbelsäule (9)
- Witterung (9)
- Österreich (9)
- Automatic (8)
- Bauwerk (8)
- Beton (8)
- Chemische Analyse (8)
- Decke (Straße) (8)
- Environment (8)
- Erfahrung (menschl) (8)
- Erste Hilfe (8)
- Experience (human) (8)
- Fahreignung (8)
- Fahrstabilität (8)
- Fahrzeuginnenraum (8)
- Fracture (bone) (8)
- Führerschein (8)
- Grenzwert (8)
- Hospital (8)
- Human body (8)
- Information documentation (8)
- Junction (8)
- Klassifizierung (8)
- Knee (human) (8)
- Knochenbruch (8)
- Limit (8)
- Menschlicher Körper (8)
- Mobility (8)
- Mobilität (8)
- Oberflächentextur (8)
- Official approval (8)
- Quality assurance (8)
- Qualitätssicherung (8)
- Software (8)
- Surface texture (8)
- USA (8)
- Vehicle handling (8)
- Vereinigtes Königreich (8)
- Wasser (8)
- Water (8)
- Wirksamkeitsuntersuchung (8)
- Blood (7)
- Blut (7)
- Brücken Management System (7)
- Driving licence (7)
- Eigenschaft (7)
- Engineering structure (7)
- Fahrgeschicklichkeit (7)
- Frau (7)
- Halswirbel (7)
- Impact test (7)
- Ort (Position) (7)
- Orthotrope Fahrbahntafel (7)
- Probability (7)
- Properties (7)
- Psychologie (7)
- Psychology (7)
- Quality (7)
- Qualität (7)
- Reaction (human) (7)
- Rehabilitation (7)
- Road traffic (7)
- Sichtbarkeit (7)
- Straßenentwurf (7)
- Straßenverkehrsrecht (7)
- Traffic regulations (7)
- Sichtbarkeit (7)
- Wahrscheinlichkeit (7)
- Welding (7)
- Abbiegen (6)
- Attention (6)
- Aufmerksamkeit (6)
- Bicycle (6)
- Bremse (6)
- Bridge deck (6)
- Bridge management system (6)
- Cervical vertebrae (6)
- China (6)
- Continuous (6)
- Correlation (math, stat) (6)
- Crashtest (6)
- Decision process (6)
- Drainage (6)
- Echtzeit (6)
- Economic efficiency (6)
- Emission control (6)
- Entscheidungsprozess (6)
- Entwässerung (6)
- Fahrbahntafel (6)
- Fahrrad (6)
- Fernverkehrsstraße (6)
- Finite element method (6)
- First aid (6)
- Fuge (6)
- Genauigkeit (6)
- Gesetzesdurchführung (6)
- Highway design (6)
- Impact sled (6)
- India (6)
- Indien (6)
- Joint (structural) (6)
- Knie (menschl) (6)
- Kontinuierlich (6)
- Kosten (6)
- Kraftfahrzeug (6)
- Laboratorium (6)
- Leistungsfähigkeit (Fahrer) (6)
- Location (6)
- Main road (6)
- Nacht (6)
- Night (6)
- Oberfläche (6)
- Perception (6)
- Portugal (6)
- Reaktionsverhalten (6)
- Real time (6)
- Schutzeinrichtung (6)
- Schweden (6)
- Schweissen (6)
- Spinal column (6)
- Stadt (6)
- Stress (psychol) (6)
- Surface (6)
- Temperatur (6)
- Temperature (6)
- United Kingdom (6)
- Urban area (6)
- Vorn (6)
- Wahrnehmung (6)
- Wirtschaftlichkeit (6)
- Woman (6)
- Addiction (5)
- Analyse (Math) (5)
- Angle (5)
- Arbeitsgruppe (5)
- Aufprallschlitten (5)
- Automatische Notbremsung (5)
- Baumusterzulassung (5)
- Bauweise (5)
- Beam (5)
- Beschichtung (5)
- Body (car) (5)
- Brake (5)
- Coating (5)
- Communication (5)
- Construction method (5)
- Corrosion (5)
- Cost (5)
- Deformierbare Barriere (Anpralltest) (5)
- Delivery vehicle (5)
- EU directive (5)
- Eins (5)
- Electric vehicle (5)
- Electronic stability program (5)
- Elektrofahrzeug (5)
- Emissionskontrolle (5)
- Enforcement (law) (5)
- Fahrtüchtigkeit (5)
- Festigkeit (5)
- Fire (5)
- Forschungsbericht (5)
- France (5)
- Frankreich (5)
- Griffigkeit (5)
- Intelligent transport system (5)
- Kamera (5)
- Karosserie (5)
- Kommunikation (5)
- Korrelation (math, stat) (5)
- Korrosion (5)
- Laboratory (not an organization) (5)
- Landstraße (5)
- Methode der finiten Elemente (5)
- Modell (5)
- Nanotechnologie (5)
- Nanotechnology (5)
- Oberbau (5)
- Offender (5)
- One (5)
- Oxid (5)
- Oxide (5)
- Pavement (5)
- Police (5)
- Polizei (5)
- Post crash (5)
- Rehabilitation (road user) (5)
- Reinforcement (gen) (5)
- Research report (5)
- Risk taking (5)
- Rural road (5)
- Schallpegel (5)
- Schutz (5)
- Sound level (5)
- Specification (Standard) (5)
- Stahl (5)
- Steel (5)
- Strength (mater) (5)
- Stress (5)
- Süchtigkeit (5)
- Titan (5)
- Titanium (5)
- Umweltschutz (5)
- Vegetation (5)
- Verstärkung (allg) (5)
- Winkel (5)
- Working group (5)
- Abdomen (4)
- Accuracy (4)
- Adaptation (psychol) (4)
- Alcohol test (4)
- Alkoholtest (4)
- Anpassung (psychol) (4)
- Asphaltstraße (Oberbau) (4)
- Autonomous emergency braking (4)
- Balken (4)
- Baustoff (4)
- Berufsausübung (4)
- Bicyclist (4)
- Blech (4)
- Camera (4)
- Carriageway (4)
- Coefficient of friction (4)
- Collision test (veh) (4)
- Compliance (specif) (4)
- Composite bridge (4)
- Concentration (chem) (4)
- Contact (tyre road) (4)
- Contract (4)
- Cycle track (4)
- Deformable barrier (impact test) (4)
- Digitale Bildverarbeitung (4)
- Distraction (4)
- Dynamics (4)
- Dynamik (4)
- Elektronisches Stabilitätsprogramm (4)
- Emission (4)
- Entdeckung (4)
- Environment protection (4)
- Ermüdung (mater) (4)
- Estimation (4)
- European Union (4)
- Fahrbahn (4)
- Fahrdatenschreiber (4)
- Feinstaub (4)
- Finanzierung (4)
- Frequency (4)
- Gefahrenabwehr (4)
- Geschichte (4)
- Gestaltung (4)
- Gewicht (4)
- Hazard (4)
- Herstellung (4)
- Hinten (4)
- History (4)
- Immission (4)
- Information management (4)
- LKW (4)
- Langfristig (4)
- Layout (4)
- Lebensdauer (4)
- Lieferfahrzeug (4)
- Long term (4)
- Man (4)
- Mann (4)
- Manufacture (4)
- Material (constr) (4)
- Occupant (veh) (4)
- Occupation (4)
- Orthotrope Platte (4)
- Overtaking (4)
- Particulate matter (4)
- Pavement Management System (4)
- Personal (4)
- Personality (4)
- Personnel (4)
- Persönlichkeit (4)
- Platte (4)
- Pollution concentration (4)
- Psychological aspects (4)
- Psychologische Gesichtspunkte (4)
- Public transport (4)
- Quer (4)
- Radweg (4)
- Rear (4)
- Regression analysis (4)
- Regressionsanalyse (4)
- Reibungsbeiwert (4)
- Reifen (4)
- Reproducibility (4)
- Reproduzierbarkeit (4)
- Safety fence (4)
- Sample (mater) (4)
- Schrägseilbrücke (4)
- Security (4)
- Seite (4)
- Sheet (metal) (4)
- Skidding resistance (4)
- Slab (4)
- Stayed girder bridge (4)
- Steife (Brücke) (4)
- Sweden (4)
- Telekommunikation (4)
- Theorie (4)
- Theory (4)
- Traffic control (4)
- Transverse (4)
- Tyre (4)
- Tyre tread (4)
- Unfallfolgemaßnahme (4)
- Unterfahrschutz (4)
- Unterleib (4)
- Verbundbrücke (4)
- Verkehrssteuerung (4)
- Vorschrifteneinhaltung (4)
- Warning (4)
- Weight (4)
- Wirkungsanalyse (4)
- Öffentlicher Verkehr (4)
- Überholen (4)
- Abdichtung (3)
- Abkommen von der Fahrbahn (Unfall) (3)
- Ablenkung (psychol) (3)
- Accident proneness (3)
- Accompanied driving (3)
- Activity report (3)
- Advanced driver assistance system (3)
- Aggression (psychol) (3)
- Animal (3)
- Auftrag (3)
- Ausbesserung (3)
- Ausdehnung (mater) (3)
- Australia (3)
- Australien (3)
- Autonomes Fahrzeug (3)
- Autonomous vehicle (3)
- Bauwerksmonitoring (3)
- Befreiung (Bergung) (3)
- Begleitetes Fahren (3)
- Behinderter (3)
- Bein (3)
- Beinahe Unfall (3)
- Bituminous mixture (3)
- Blickfeld (3)
- Brand (3)
- Brückenbelag (3)
- Budget (3)
- Bus (3)
- CEN (3)
- Cable (3)
- Case law (3)
- Cement (3)
- Chromatographie (3)
- Chromatography (3)
- Crash test (3)
- Cross section (3)
- Czech Republic (3)
- Data base (3)
- Data processing (3)
- Datenverarbeitung (3)
- Datenübertragung (telekom) (3)
- EU-Richtlinie (3)
- Effectiveness (3)
- Electronic driving aid (3)
- Elektronische Fahrhilfe (3)
- Emergency (3)
- Empfindlichkeit (3)
- Ergonomics (3)
- Event data recorder (road vehicle) (3)
- Expansion (3)
- Experimental road (3)
- Extrication (3)
- Fahrbahnmarkierung (3)
- Fahrbahnüberquerung (3)
- Fahrsimulator (3)
- Fahrzeugrückhaltesystem (3)
- Fatigue (human) (3)
- Fatigue (mater) (3)
- Field of vision (3)
- Financing (3)
- Flexible pavement (3)
- Frequenz (3)
- Fugenfüllung (3)
- Führerscheinentzug (3)
- Gefahr (3)
- Gemeindeverwaltung (3)
- Geomembran (3)
- Geomembrane (3)
- Geschwindigkeitsbeschränkung (3)
- Gesetzesübertretung (3)
- Government (national) (3)
- Grundwasser (3)
- Harmonisation (3)
- Head restraint (3)
- In situ (3)
- Installation (3)
- Intelligentes Transportsystem (3)
- Intersection (3)
- Kleidung (3)
- Kontakt Reifen Straße (3)
- Konzentration (chem) (3)
- Kopfstütze (3)
- Korea (Süd) (Demokratische Republik) (3)
- Kunststoff (3)
- Lenken (Fahrzeug) (3)
- Local authority (3)
- Longitudinal (3)
- Längs (3)
- Lärmschutzwand (3)
- Messgerät (3)
- Model (not math) (3)
- Montage (3)
- Müdigkeit (3)
- Near miss (3)
- Netherlands (3)
- Niederlande (3)
- Noise barrier (3)
- Notfall (3)
- Offence (3)
- Organization (3)
- Organization (Association) (3)
- Overlapping (3)
- Passenger (3)
- Pavement management system (3)
- Plastic material (3)
- Population (3)
- Probe (3)
- Prototyp (3)
- Prototype (3)
- Psychological examination (3)
- Psychologische Untersuchung (3)
- Querschnitt (3)
- Radio (3)
- Rechtsprechung (3)
- Rechtsübertreter (3)
- Recording (3)
- Recycling (3)
- Recycling (mater) (3)
- Reifenprofil (3)
- Reinforcement (in mater) (3)
- Republic of Korea (3)
- Retraining of drivers (3)
- Risikoverhalten (3)
- Run off the road (accid) (3)
- Rundfunk (3)
- Seepage (3)
- Sensitivity (3)
- Severity (acid (3)
- Shock (3)
- Sickerung (3)
- Simulator (driving) (3)
- Spain (3)
- Spanien (3)
- Speed limit (3)
- Steering (process) (3)
- Stiffener (Bridge) (3)
- Straßenseitenfläche (3)
- Structural health monitoring (3)
- Telecommunication (3)
- Tier (3)
- Time (3)
- Traffic count (3)
- Tragschicht (3)
- Trapezoidal beam (3)
- Tschechische Republik (3)
- Turn (3)
- Turning (3)
- Umweltverträglichkeitsprüfung (3)
- Unfallneigung (3)
- Unfallschwerpunkt (3)
- United kingdom (3)
- Vehicle restraint system (3)
- Verkehrserhebung (3)
- Verschiebung (3)
- Versuchspuppe (3)
- Versuchsstrecke (3)
- Vorne (3)
- Warnung (3)
- Waterproofing (3)
- Wet road (3)
- Zeit (3)
- Zement (3)
- Absorption (2)
- Abstandsregeltempomat (2)
- Acceleration (2)
- Accident black spot (2)
- Accident data (2)
- Achslast (2)
- Active safety (2)
- Adult (2)
- Ageing (2)
- Aggressiveness (psychol) (2)
- Aktive Sicherheit (2)
- Alcohol (2)
- Alcolock (2)
- Alkohol (2)
- Alterung (mater) (2)
- Anthropmetric dummy (2)
- Anti locking device (2)
- Antiblockiereinrichtung (2)
- Asphaltoberbau (2)
- Audit (2)
- Aufzeichnung (2)
- Ausführungsfehler (2)
- Ausschreibung (2)
- Axle load (2)
- Ballungsgebiet (2)
- Battery (2)
- Bepflanzung (2)
- Beschleunigung (2)
- Bevölkerung (2)
- Bewehrung (2)
- Bindemittel (2)
- Binder (2)
- Bituminöses Mischgut (2)
- Black ice (2)
- Blendung (2)
- Blutkreislauf (2)
- Bremsweg (2)
- Bridge surfacing (2)
- Bruch (mech) (2)
- Böschung (2)
- Calibration (2)
- Carriageway marking (2)
- Catalysis (2)
- Circulation (blood) (2)
- Clothing (2)
- Coach (2)
- Coefficient (2)
- Comprehension (2)
- Compression (2)
- Confiscation (driving licence) (2)
- Contractor (2)
- Control (2)
- Conurbation (2)
- Costs (2)
- Crash Test (2)
- Crash victim (2)
- Cross roads (2)
- Crossing the road (2)
- Cycling (2)
- Damping (2)
- Data security (2)
- Data transmission (telecom) (2)
- Datenbasis (2)
- Datensicherheit (2)
- Defect (tech) (2)
- Depth (2)
- Deterioration (2)
- Deutschalnd (2)
- Diabetes (2)
- Digital image processing (2)
- Disablement (2)
- Dreidimensional (2)
- Driving (2)
- Driving test (2)
- Durchlässigkeit (2)
- Dusk (2)
- Dämmerung (2)
- Dämpfung (2)
- EU Richtlinie (2)
- Edge (2)
- Eichung (2)
- Einbau (2)
- Eindringung (2)
- Eingabedaten (2)
- Electric bicycle (2)
- Elektrofahrrad (2)
- Energie (2)
- Energy (2)
- Entwässerungsleitung (2)
- Ergonomie (2)
- Erwachsener (2)
- Eu (2)
- Fahrernachschulung (2)
- Fahrerweiterbildung (2)
- Fahrprüfung (2)
- Fahrstreifen (2)
- Fahrzeugteil (Sicherheit) (2)
- Faserbewehrter Beton (2)
- Feuer (2)
- Fiber reinforced concrete (2)
- Finland (2)
- Finnland (2)
- Flooding (2)
- Foot (not a measure) (2)
- Form (2)
- Full depth asphalt pavement (2)
- Fuß (2)
- Gas (2)
- Gebiet (2)
- Geländefahrzeug (2)
- Geologie (2)
- Geotextil (2)
- Geotextile (2)
- Gesundheit (2)
- Glare (2)
- Glatteis (2)
- Greenhouse effect (2)
- Grooving (2)
- Ground water (2)
- Group analysis (test) (2)
- Haftung (jur) (2)
- Harmonisierung (2)
- Headlamp (2)
- Health (2)
- Hearing (2)
- Heat (2)
- Height (2)
- High performance concrete (2)
- Highway traffic (2)
- Hot coated material (2)
- Höhe (2)
- Hörvermögen (2)
- Image processing (2)
- Impact study (environment) (2)
- Individueller Verkehr (2)
- Input data (2)
- Interactive model (2)
- Interaktives Modell (2)
- Jahreszeit (2)
- Joint sealing (2)
- Katalyse (2)
- Knie (2)
- Koeffizient (2)
- Kontakt Reifen-Straße (2)
- Kreuzung (2)
- Landslide (2)
- Laying (2)
- Learning (2)
- Length (2)
- Liability (2)
- Lifecycle (2)
- Massenunfall (2)
- Mechanics (2)
- Mechanik (2)
- Mental illness (2)
- Methode der finite Elemente (2)
- Mittelwert (2)
- Mobile phone (2)
- Mobiltelefon (2)
- Movement (2)
- Multiple collision (2)
- Nachhaltige Entwicklung (2)
- Nasse Straße (2)
- Nerve (2)
- Nerven (2)
- Network (traffic) (2)
- Nutzwertanalyse (2)
- Organization (association) (2)
- Output (2)
- PVC (2)
- Penetration (2)
- Permeability (2)
- Polyvinylchloride (2)
- Posture (2)
- Prestressed concrete (2)
- Private transport (2)
- Privatisierung (2)
- Programmed learning (2)
- Programmierter Unterricht (2)
- Provisorisch (2)
- Prüfung (2)
- Psychische Krankheit (2)
- Public private partnership (2)
- Public relations (2)
- Pylon (2)
- Radfahren (2)
- Rail traffic (2)
- Rain (2)
- Rechtübertreter (2)
- Reflectorized material (2)
- Reflexstoffe (2)
- Regen (2)
- Regierung (staat) (2)
- Region (2)
- Rehabilitation (Road user) (2)
- Reisebus (2)
- Research (2)
- Responsibility (2)
- Restraint system (2)
- Rillenherstellung (2)
- Ringanalyse (2)
- Road (2)
- Road base (2)
- Roadside (2)
- Robot (2)
- Roboter (2)
- Rolling resistance (2)
- Rollwiderstand (2)
- Rutschung (2)
- Rückfalltäter (2)
- Rücksichtslosigkeit (2)
- Scheinwerfer (2)
- Schienenverkehr (2)
- Schlag (2)
- Schleudertrauma (2)
- Schweiz (2)
- Season (2)
- Seat belt (2)
- Sehvermögen (2)
- Seil (2)
- Seminar (2)
- Service life (2)
- Sewer (2)
- Side (2)
- Slope (terrain) (2)
- Sociology (2)
- Soziologie (2)
- Spannbeton (2)
- Spannung (mater) (2)
- Sport utility vehicle (2)
- Statistical analysis (2)
- Statistische Analyse (2)
- Stochastic process (2)
- Stochastischer Prozess (2)
- Storm (2)
- Stress (in material) (2)
- Sturm (2)
- Sustainability (2)
- Switzerland (2)
- Technische Vorschriften (2)
- Telefon (2)
- Telematics (2)
- Telematik (2)
- Telephone (2)
- Temporary (2)
- Three dimensional (2)
- Tiefe (2)
- Toxizität (2)
- Traffic engineering (2)
- Trapezförmiger Träger (2)
- Treibhauseffekt (2)
- Trend (stat) (2)
- Tätigkeitsbericht (2)
- Underride prevention (2)
- Underride protection (2)
- Unfalldaten (2)
- Unfallopfer (2)
- Unfallverhuetung (2)
- Untersuchung am unfallort (2)
- Value analysis (2)
- Vehicle safety (2)
- Vehicle safety device (2)
- Verantwortung (2)
- Verkehrsnetz (2)
- Verkehrstechnik (2)
- Verständnis (2)
- Vertragspartner (2)
- Verwitterung (2)
- Vision (2)
- Visual display (2)
- Weathering (2)
- Whiplash injury (2)
- Windschutzscheibe (2)
- Winter maintenance (2)
- Winterdienst (2)
- Wärme (2)
- Zeitreihe (stat) (2)
- Zulassung (tech) (2)
- Zusammendrückung (2)
- Zusammenstoss (2)
- Öffentlichkeitsarbeit (2)
- Überlappung (2)
- Überschwemmung (2)
- (menschl) (1)
- Abgaben (1)
- Abgefahrener Reifen (1)
- Ability (road user) (1)
- Abkommen von der Fahrbahn (1)
- Ablenkung (1)
- Abnutzung (1)
- Acceptability (1)
- Accident prone location (1)
- Accident severity (1)
- Active safety system; Automatic; Brake; Car; Collision avoidance system; Conference; Driver assistance system; Germany; Impact test (veh); Rear end collision; Severity (accid (1)
- Adaptive cruise control (1)
- Adaptive cruise controll (1)
- Adhesion (1)
- Adhäsion (1)
- Admnistration (1)
- Advanced vehicle control systems (1)
- Aesthetics (1)
- Aethanol (1)
- Aged people (1)
- Aggression (psycho) (1)
- Air quality management (1)
- Air traffic control (1)
- Airbag (restraint system) (1)
- Aircraft (1)
- Alignment (1)
- Alternativ (1)
- Alternative (1)
- Aluminat (1)
- Aluminate (1)
- Aluminium (1)
- Analyse (1)
- Analyse (chem) (1)
- Analyses (math) (1)
- Anchorage (1)
- Ankündigung (1)
- Anthropometrie (1)
- Anthropometry (1)
- Anthrpometric dummy (1)
- Antikollisisonssystem (1)
- Apparatus (Measuring) (1)
- Apparatus (measurement) (1)
- Apparatus (measuring) (1)
- Aquaplaning (1)
- Arbeitsplatz (1)
- Arm (human) (1)
- Arm (menschl) (1)
- Articulated vehicle (1)
- Asphalt (1)
- Asset management (1)
- Asset management system (1)
- Atem (1)
- Atives Sicherheitssystem (1)
- Attitide (psychol) (1)
- Auffharunfall (1)
- Auftaumittel (1)
- Aufzeichung (1)
- Auslaugung (1)
- Ausländer (1)
- Autonomous emerhency braking (1)
- Autotür (1)
- Average (1)
- Back (human) (1)
- Batterie (1)
- Baum (1)
- Bauwerks Management System (1)
- Bein [menschl] (1)
- Belohnung (Anreiz) (1)
- Benefit cost analysis (1)
- Berechnung d Straßenoberbaus (1)
- Beschilderung (1)
- Bestrafung (1)
- Beton ; Betonstraße (Oberbau) (1)
- Betonfertigteil (1)
- Bildschirm (1)
- Bitumen (1)
- Blasting (1)
- Blind spot (veh) (1)
- Bodenbehandlung (1)
- Bodenmechanik (1)
- Bone (1)
- Brain (1)
- Brake light (1)
- Braking distance (1)
- Brasilien (1)
- Brazil (1)
- Breaking (1)
- Breath (1)
- Breite (1)
- Bremslicht (1)
- Bridges (1)
- Brittleness (1)
- Brücken (1)
- Bumper (1)
- By product (1)
- Bypass (loop road) (1)
- Böschungsbefestigung (1)
- Cadaver (1)
- Calcium (1)
- Cantilever (1)
- Capacity (road, footway) (1)
- Car door (1)
- Carbon dioxide (1)
- Case study (1)
- Causes (1)
- Central reserve (1)
- Cervical vertebrae; Conference; Evaluation (assessment); Injury; Spinal column; Test (1)
- Chassis (1)
- Chest (1)
- Clay (1)
- Climate change (1)
- Cognitive impairment (1)
- Collisison avoidance system (1)
- Colthing (1)
- Comfort (1)
- Compatiblity (1)
- Components of the vehicle (1)
- Computation (1)
- Conference; Germany; Injury; Medical examination; Spinal column; X ray (1)
- Confiscation (driving license) (1)
- Consumer protection (1)
- Contact (tyre (1)
- Cooling (mater) (1)
- Cooperative intelligent transport system (1)
- Critical path method (1)
- Crossing the road (pedestrian) (1)
- Customer (1)
- Data basis (1)
- Data collection (1)
- Data transmission (1)
- Datenübertragung (Telekom) (1)
- Dauer (1)
- Day (24 hour period) (1)
- Daylight (1)
- Deceleration (1)
- Decke [Straße] (1)
- Decreases (1)
- Deflectograph (1)
- Deformable barrier (Impact test) (1)
- Deformable barrier system (impact test) (1)
- Deformierte Barriere (Anpralltest) (1)
- Dehnungsmessstreifen (1)
- Deicing (1)
- Delivery (1)
- Demand (econ) (1)
- Demografie (1)
- Demographie (1)
- Demography (1)
- Density (1)
- Deregulation (1)
- Deregulierung (1)
- Design (1)
- Deutschland ; Konferenz (1)
- Dichte (1)
- Diesel engine (1)
- Dieselmotor (1)
- Digital computer (1)
- Digitalrechner (1)
- Disabled person (1)
- Dispersion (stat) (1)
- Displacement (1)
- Distribution (gen) (1)
- Ditch (1)
- Driver experience (1)
- Driving aid (electronic) (1)
- Driving instructor (1)
- Driving license (1)
- Dränasphalt (1)
- Dtetection (1)
- Durchbiegungsmesser (1)
- Durchsichtigkeit (1)
- Dynamo (1)
- Earth dam (1)
- Ebenheit (1)
- Economics of transport (1)
- Ecosystem (1)
- Einfahrt (1)
- Ejection (1)
- Elastizitätsmodul (1)
- Electronics (1)
- Elektronik (1)
- Elektronisches Stabilitätsprogram (1)
- Emergency medical aid (1)
- Emissionkontrolle (1)
- Engine capacity (1)
- Engineering structures (1)
- Enteignung (1)
- Entgleisung (Zug) (1)
- Entrance (1)
- Entschädigung (1)
- Enviroment (1)
- Environmental impact analysis (1)
- Environmental protection (1)
- Epilepsie (1)
- Epilepsy (1)
- Epoxidharz (1)
- Epoxy resin (1)
- Equilibrium (1)
- Erddamm (1)
- Ernährung (1)
- Ersatzdroge (1)
- Ethanol (1)
- European New Car Assessment Programme (1)
- Evacuation (1)
- Evakuierung (1)
- Evaluation (1)
- Evaluation (Assessment) (1)
- Evenness (1)
- Event data recorder (Road vehicle) (1)
- Expert system (1)
- Expertensystem (1)
- Explosion (1)
- Expressway (1)
- Expropriation (1)
- Face (human) (1)
- Facility (1)
- Fahrer ; Fahrerassistenzsystem (1)
- Fahrerinformationen (1)
- Fahrernacherziehung (1)
- Fahrlehrer (1)
- Fahrleistung (1)
- Fahrstreifenwechsel (1)
- Fahrwerk (1)
- Fahrzeugbeleuchtung (1)
- Fahrzeugdach (1)
- Fahrzeugflotte (1)
- Fahrzeugteile (1)
- Failure (1)
- Fallstudie (1)
- Falschfahren (1)
- Fatigue (mech) (1)
- Fear (1)
- Feldversuch (1)
- Fels (1)
- Fence (1)
- Fernsteuerung (1)
- Field (test) (1)
- Fleet of vehicles (1)
- Flugsicherung (1)
- Flächennutzung (1)
- Flächennutzungsplan (1)
- Flächentragwerk (1)
- Fog (1)
- Food (1)
- Force (1)
- Foreigner (1)
- Forschung (1)
- Foundation (1)
- Freight transport (1)
- Friction (1)
- Frost blanket (1)
- Frostschutzschicht (1)
- Fruchtsaft (1)
- Fruit (1)
- Fruit juice (1)
- Fuel tank (1)
- Functional safety (1)
- Funktionale Sicherheit (1)
- Furcht (1)
- Future transport mode (1)
- Führerschein Punktesystem (1)
- Game protection fence (1)
- Gehirn (1)
- Gelenkfahrzeug (1)
- Geländer (1)
- Geocomposite (1)
- Geografisches Information System (1)
- Geographical information system (1)
- Geokomposit (1)
- Geometry (shape) (1)
- Geophysic (1)
- Geophysik (1)
- Georadar (1)
- Geradeausverkehr (1)
- Gesicht (1)
- Gleichgewicht (1)
- Glue (1)
- Goods traffic (1)
- Graben (1)
- Gravity (1)
- Great Britain (1)
- Ground penetrating radar (1)
- Groundwater (1)
- Großbritannien (1)
- Grunderwerb (1)
- Gründung (1)
- Guardrail (1)
- Gussasphalt (1)
- Gütertransport (1)
- Güterverkehr (1)
- Hard shoulder (1)
- Harmonization (1)
- Haushalt (finanz) (1)
- Head (human) (1)
- Heart (1)
- Heavy traffic (1)
- Heissmischgut (1)
- Heißmischgut (1)
- Herausschleudern (1)
- Herz (1)
- Higway design (1)
- Hip (human) (1)
- Hochfester Beton (1)
- Hochleistungsbeton (1)
- Homogeneity (1)
- Homogenität (1)
- Hospitsl (1)
- Hubraum (1)
- Human machine interface (1)
- Hängebrücke (1)
- Häufigkeit (1)
- Hüfte (1)
- Hüfte (menschl) (1)
- Image analysis (1)
- Image generation (1)
- Impact (collision) (1)
- Impact test (crash) (1)
- In Bewegung (1)
- Incident management (1)
- Indemnity (1)
- Industrie (1)
- Industrierückstand (1)
- Industry (1)
- Inertia reel safety belt (1)
- Infotainment System (1)
- Infotainment system (1)
- Injection (mater) (1)
- Injektion (mater) (1)
- Injury) (1)
- Intelligentes Transport System (1)
- Intelligentes Verkehrssystem (1)
- Interface (1)
- Internet (1)
- Intoxication (1)
- Invasive Art (1)
- Invasive plants (1)
- Inventar (1)
- Inventory (1)
- Ireland (1)
- Irland (1)
- Italien (1)
- Italy (1)
- Itinerary (1)
- Kabel (1)
- Kalk (1)
- Kapazität (Straße) (1)
- Karte (1)
- Klassifikation (1)
- Klebstoff (1)
- Kleintransporter (1)
- Klimawandel (1)
- Knochen (1)
- Kognitive Beeinträchtigung (1)
- Kohlendioxid (1)
- Kolmatierung (1)
- Komfort (1)
- Kompatiblität (1)
- Konstruktion (1)
- Konzentration (1)
- Kooperatives System (ITS) (1)
- Kopf (menschl) (1)
- Korea (Süd) (1)
- Korrelation [math (1)
- Kraft (1)
- Kraftstofftank (1)
- Kragarm (1)
- Kreisverkehrsplatz (1)
- Kunde (1)
- Körperhaltung (1)
- Körperstellung (1)
- Kühlung (mater) (1)
- Laboratory (1)
- Land acquisition (1)
- Land use (1)
- Landscaping (1)
- Landschaftsgestaltung (1)
- Lane changing (1)
- Lap strap (1)
- Laser (1)
- Lateral (1)
- Lateral collision (1)
- Law enforcement (1)
- Layer (1)
- Leaching (1)
- Leichnam (1)
- Leistungsfähigkeit (Allg.) (1)
- Lernen (1)
- Leuchtdichte (1)
- Level of service (1)
- Lieferung (1)
- Life cycle analysis (1)
- Lime (1)
- Linienführung (1)
- Links (1)
- Load capacity (1)
- Luftfahrzeug (1)
- Luftreinhaltung (1)
- Luminance (1)
- Länge (1)
- Maintenance management (1)
- Malaysia (1)
- Map (1)
- Market (1)
- Markt (1)
- Mass spectrometry (1)
- Massenspektrometrie (1)
- Materialveraenderung (allg) (1)
- Materialveränderung (allg) (1)
- Mathematical Model (1)
- Matrix (1)
- Mean (math) (1)
- Mensch Maschine Schnittstelle (1)
- Mensch Maschine Verhältnis (1)
- Text (1)
- Methanol (1)
- Minimum (1)
- Mittelstreifen (1)
- Model (non math) (1)
- Modulus of elasticity (1)
- Moped (1)
- Motorisierungsgrad (1)
- Moving (1)
- Nachfrage (1)
- Nachhaltigkeit (1)
- Nachrechnungsrichtlinie (1)
- Nachricht (1)
- Nachtrunk (1)
- Nasse Strasse (1)
- Naturalistic Driving (1)
- Naturalistic driving (1)
- Nebel (1)
- Netzplantechnik (1)
- Neural network (1)
- Neurologie (1)
- Neurology (1)
- Neuronales Netz (1)
- Nigeria (1)
- Nordamerika (1)
- North America (1)
- Norway (1)
- Norwegen (1)
- Nummer (1)
- Oberflächenbehandlung (1)
- Obst (1)
- Occupant (1)
- Offset impact test (1)
- On the left (1)
- On the right (1)
- On the scene accident investigation (1)
- On the spot investigation (1)
- Optische Anzeige (1)
- Organozation (Association) (1)
- Overturning (1)
- Oxidation (1)
- Oxygen (1)
- Padding (safety) (1)
- Parapet (1)
- Parken (1)
- Parking (1)
- Partnerschaft (1)
- Partnership (1)
- Passive restraint system (1)
- Pavement design (1)
- Peat (1)
- Pelvis (1)
- Penalty (1)
- Pfahl (1)
- Pflasterstein (1)
- Pfosten (1)
- Physiologie (1)
- Physiology (1)
- Pile (1)
- Point demerit system (1)
- Poland (1)
- Pole (1)
- Polen (1)
- Politics (1)
- Pollutant (1)
- Pollution (1)
- Polyolefin (1)
- Polyurethan (1)
- Polyurethane (1)
- Polyvinylhydrocarbon (1)
- Porous asphalt (1)
- Portable (1)
- Position (1)
- Precast concrete (1)
- Pregnancy (1)
- Preloading (soil) (1)
- Prestressed (1)
- Priority (gen) (1)
- Priority (traffic) (1)
- Privat (1)
- Private (1)
- Privatisation (1)
- Privatization (1)
- Procurement (1)
- Prohibition (1)
- Protective helmet (1)
- Prüefverfahren (1)
- Prüfkörper (1)
- Pssives Sicherheitssystem (1)
- Public participation (1)
- Pumpeffekt (1)
- QAccident (1)
- Quality management system (1)
- Qualitätsmanagementsystem (1)
- Radar (1)
- Rail bound transport (1)
- Reaktionsfähigkeit (1)
- Rear view mirror (1)
- Rechts (1)
- Recidicist (1)
- Recidivist (1)
- Reconstruction [accid] (1)
- Reduction (decrease) (1)
- Regierung (Staat) (1)
- Regional planning (1)
- Reibung (1)
- Reinforced concrete (1)
- Reiseweg (1)
- Remote control (1)
- Republic of Corea (1)
- Research projekt (1)
- Residential area (1)
- Resuscitation (1)
- Reversing (veh) (1)
- Reward (1)
- Rib (1)
- Richtlinie (1)
- Rippe (menschl) (1)
- Road heating (1)
- Road marking (1)
- Road pricing (1)
- Road transport (1)
- Road verge (1)
- Road weather conditions (1)
- Roadbase (1)
- Rock (1)
- Roll over (veh) (1)
- Roof (veh) (1)
- Rotation (1)
- Roundabout (1)
- Route guidance (1)
- Rsk (1)
- Run oo the road (accid) (1)
- Rupture (1)
- Röntgenstrahlung (1)
- Rücken (1)
- Rückspiegel (1)
- Rückwärtsfahren (1)
- Safety harness (1)
- Safety system (1)
- Saftey (1)
- Salt (deicing) (1)
- Sauerstoff (1)
- Schadstoff (1)
- Schall (1)
- Schicht (1)
- Schienentransport (1)
- Schnittstelle (1)
- School (1)
- Schule (1)
- Schulter (1)
- Schwangerschaft (1)
- Schweißen (1)
- Schweregrad (UNfall (1)
- Schweregrad (Unfall, Verletzung (1)
- Schweregrad /Unfall (1)
- Schwerkraft (1)
- Schwerverkehr (1)
- Schwingung (1)
- Schätzung (1)
- Sealing coat (on the top of the surfacing) (1)
- Sealing coat (on top of the surfacing) (1)
- Sealing compound (1)
- Seat (1)
- Seat harness (1)
- Seitenstreifen (befestigt) (1)
- Service area (1)
- Sett (1)
- Settlement (1)
- Setzung (1)
- Severity (accid, injuy) (1)
- Shape (1)
- Shell (struct) (1)
- Shoulder (human) (1)
- Sicherheitspolsterung (1)
- Signalization (1)
- Significance (1)
- Signifikanz (1)
- Silting (1)
- Sintering (1)
- Sintern (1)
- Skid resistance (1)
- Slab pumping (1)
- Slope stability (1)
- Social factors (1)
- Soil mechanics (1)
- Soil stabilization (1)
- Sound (1)
- Soziale Faktoren (1)
- Spaltzugfestigkeitsversuch (1)
- Span (1)
- Spannweite (1)
- Specification (1)
- Spectrum (1)
- Speed) (1)
- Spektrum (1)
- Spinal calum (1)
- Splitting tensile test (1)
- Spreading (1)
- Sprödigkeit (1)
- Sri Lanka (1)
- Stability (1)
- Stadardization (1)
- Stadtentwicklung (1)
- Staggered junction (1)
- Stahlbeton (1)
- Stand der Technik (Bericht) (1)
- Standardabweichung (1)
- Standfestigkeit (1)
- Stapedius reflex (1)
- Stapediusreflex (1)
- State of the art report (1)
- Statistik (math) (1)
- Stickoxide (1)
- Stiffeners (Bridge) (1)
- Stopping distance (1)
- Stoßstange (1)
- Straight ahead (traffic) (1)
- Strain gauge (1)
- Strasse (1)
- Straßenbenutzungsgebühr (1)
- Straßenheizung (1)
- Straßentransport (1)
- Strength ; Tension (1)
- Structure (physicochem) (1)
- Struktur (physikochem) (1)
- Störfallmanagement (1)
- Subsequent drink (1)
- Subsoil (1)
- Substitution drugs (1)
- Sulfat (1)
- Sulphate (1)
- Surface dressing (1)
- Suspension (chem) (1)
- Suspension (chem.) (1)
- Suspension bridge (1)
- Sustainable development (1)
- Tag (24 Stunden) (1)
- Tageslicht (1)
- Tal (1)
- Tank Rast Anlage (1)
- Tausalz (1)
- Tax (1)
- Technische Überwachung (allg) (1)
- Teenage driver (1)
- Telecomunication (1)
- Temperature measurement (1)
- Temperaturmessung (1)
- Tender (1)
- Tension (1)
- Terrorism (1)
- Terrorismus (1)
- Test procedure (1)
- Tests (1)
- Thailand (1)
- Ton (Gestein) (1)
- Torf (1)
- Toter Winkel (1)
- Tower (Bridge) (1)
- Tower (bridge) (1)
- Toxicit< (1)
- Toxicity (1)
- Traffic concentration (1)
- Traffic infrastructure (1)
- Traffic lane (1)
- Traffic lanes (1)
- Traffic restraint (1)
- Traffic sign (1)
- Tragbar (1)
- Train (1)
- Transfer (phys) (1)
- Transparent (1)
- Transport (1)
- Transport operator (1)
- Transportunternehmen (1)
- Trapezförmiger träger (1)
- Traveler (1)
- Two dimensional (1)
- Typenzulassung (1)
- Tätigkeitsbericht ; Website (1)
- Ultraviolet (1)
- Ultraviolett (1)
- Umgehungsstraße (1)
- Umhüllung (1)
- Underpinning (1)
- Unfallfolgephase (1)
- Unfallrate (1)
- Unfallrekonsruktion (1)
- Unfallspurensicherung (1)
- Unfallverhütug (1)
- Ungeschützter Verkehrsteilnehmer (1)
- Unterfangung (1)
- Untergrund (1)
- Untersuchung am Umfallort (1)
- Urban development (1)
- Urin (1)
- Urine (1)
- Usa (1)
- Valley (1)
- Variance analysis (1)
- Varianzanalyse (1)
- Vehicle Regulations (1)
- Vehicle lighting (1)
- Vehicle mile (1)
- Vehicle ownership (1)
- Veletzung) (1)
- Veraenderung (1)
- Verankerung (1)
- Verbot (1)
- Verbraucherschutz (1)
- Vereinigtes Königreichl (1)
- Verfahen (1)
- Verfahren ; Verkehrsinfrastruktur (1)
- Verkehrsbeschränkung (1)
- Verkehrsqualität (1)
- Verkehrsstärke (1)
- Verkehrswirtschaft (1)
- Verkehrszeichen (1)
- Vermeidung (1)
- Versetzte Kreuzung (1)
- Versiegelung (1)
- Verstärkung (Brücke) (1)
- Verteilung (allg) (1)
- Verteilung (mater) (1)
- Vertrag (1)
- Verzögerung (1)
- Vibration (1)
- Video camera (1)
- Viskosity (1)
- Viskosität (1)
- Visualisation (1)
- Visualisierung (1)
- Vorbelastung (Boden) (1)
- Vorfahrt (1)
- Vorrang (1)
- Vorspannung (1)
- Vulnerable road user (1)
- Wear (1)
- Web site (1)
- Website (1)
- Website) (1)
- Wetter (1)
- Width (1)
- Wildschutzzaun (1)
- Window (veh) (1)
- Windscreen (veh) (1)
- Witterungsbedingungen (Straße) (1)
- Wohngebiet (1)
- Women (1)
- Workplace (1)
- Wrong way driving (1)
- Zahl (1)
- Zielführungssystem (1)
- Zinc (1)
- Zink (1)
- Zug (Eisenbahn) (1)
- Zug (mech) (1)
- Zukünftiges Verkehrsmittel (1)
- ZusammenstoÃüï-¿-½Ãƒ-¯Ã‚-¿Ã‚-½ (1)
- Zustandsbwertung (1)
- Zweidimensional (1)
- accident (1)
- aktives Sicherheitssystem (1)
- analyses (math) (1)
- ar (1)
- efficiency (1)
- fatality (1)
- finite element method (1)
- head (1)
- road) (1)
- simulation (1)
- stat] (1)
- tödlicher Unfall (1)
- Ästhetik (1)
- Öffentlich Private Partnerschaft (1)
- Öffentliche Beteiligung (1)
- Ökosystem (1)
- Überdeckung (1)
- Überrollung (1)
- Übertragung (phys) (1)
Institut
For the assessment of vehicle safety in frontal collisions, the crash compatibility between the colliding vehicles is crucial. Compatibility compromises both the self protection and the partner protection properties of vehicles. For the accident data analysis, the CCIS (GB) and GIDAS (DE) in-depth data bases were used. Selection criteria were frontal car accidents with car in compliance with ECE R94. For this study belted adult occupants in the front seats sustaining MAIS 2+ injuries were studied. Following this analysis FIMCAR concluded that the following compatibility issues are relevant: - Poor structural interaction (especially low overlap and over/underriding) - Compartment strength - Frontal force mismatch with lower priority than poor structural interaction In addition injuries arising from the acceleration loading of the occupant are present in a significant portion of frontal crashes. Based on the findings of the accident analysis the aims that shall be addressed by the proposed assessment approach were defined and priorities were allocated to them. The aims and priorities shall help to decide on suitable test procedures and appropriate metrics. In general it is anticipated that a full overlap and off-set test procedure is the most appropriate set of tests to assess a vehicle- frontal impact self and partner protection.
When assessing the consequences of accidents normally the injury severity and the damage costs are considered. The injury severity is either expressed within the police categories (slight injury, severe injury or fatal injury) or the AIS code that rates the fatality risk of a given injury. Both injury metrics are assessing the consequences of the accident directly after the accident. However, not all consequences of accidents are visible directly after the accident and the duration of the consequences are different. Besides a physiological reduction of functionality social and psychological implications such as reduced mobility options, problems to continue the original job etc. are happening. In order to assess long term consequences of accidents the MHH Accident Research Unit established a brief questionnaire that is distributed to accident involved people of the Hannover subset of the GIDAS data set approx. one year after the accident beginning with the accident year 2013. The basic idea of using a brief questionnaire (in fact only one page) is to obtain a relatively large return rate because the questionnaire appears to be simple and quickly answered. This appears to be important because it is believed that the majority of accident involved people will not report long term consequences. In order to allow a more detailed survey amongst those responders that are reporting long term consequences they are asked for a written consent for the additional questionnaire that will be distributed at a time that is not yet defined. Long term consequences are reported for all addressed areas, medical, physiological, psychological and sociological by people without injuries, with minor injuries and with severe injuries.
This study examines the severity and types of injuries sustained by child pedestrians aged 18 years and below in order to identify the body regions at greatest risk for injury in a pedestrian accident. Detailed medical diagnoses were reviewed retrospectively for 572 child pedestrians admitted to an urban pediatric trauma center with injuries during the time period from January 2001 to December 2005. Eighty percent of these children sustained AIS 2 or greater injuries, most commonly to the lower extremity (41%) and head (34%). Fortyfour percent of admitted children had more significant AIS 3 or greater injuries primarily to the head (58%), thorax (17%) and lower extremities (14%). Testing procedures to assess the child- interaction with the motor vehicle should include injury assessment for the pediatric head, thorax and lower extremities. This understanding of how child pedestrians interact with motor vehicles may provide insight into effective countermeasures with potential for implementation in vehicle designs world-wide.
Tempered road system
(2014)
The road performance is strongly influenced by climatic conditions. Winter conditions have massive impact on traffic security but also pavement lifetime decreases as an effect of temperature variation during wintertime and summertime. Heating and cooling of a pavement is a possibility to work against these impacts. To discuss the boundary conditions for an efficient construction and operation of a tempered road system a feasibility study has been made. The study shows the feasibility and identifies thermal energy buffering as a main challenge. When thinking of a fully regenerative operation of a large tempered road system (e.g. 20.000 m-²) the storage volume has to be too large for an economic and structurally engineered satisfactory solution. However, the location dependent usage of natural geothermal storage possibilities and as well smart alignment and construction promises a feasibility realization.
A study on knowledge and practices of first aid and CPR among police officers in Colombo and Gampaha
(2017)
Around 85% of deaths in developing countries have been found to be due to road traffic accidents (RTAs), which cost the countries around 1-2% of their gross national product (GNP). In Sri Lanka there were 2,436 deaths reported from 36,045 RTAs in 2014. This study aimed at assessing first aid and cardiopulmonary resuscitation (CPR) knowledge among police officers and identifying its relationship to their first aid and CPR practices. A study was done on 493 police officers from Colombo and Gampaha who were selected using convenience sampling through a self-administered questionnaire. The results showed that the police officers had unsatisfactory knowledge and practices of CPR and interventions for bleeding and fractures. These should therefore be focused in their further training.
The European Enhanced Vehicle-safety Committee wants to promote the use of more biofidelic child dummies and biomechanical based tolerance limits in regulatory and consumer testing. This study has investigated the feasibility and potential impact of Q-dummies and new injury criteria for child restraint system assessment in frontal impact. European accident statistics have been reviewed for all ECE-R44 CRS groups. For frontal impact, injury measures are recommended for the head, neck, chest and abdomen. Priority of body segment protection depends on the ECE-R44 group. The Q-dummy family is able to reflect these injuries, because of its biofidelity performance and measurement capabilities for these body segments. Currently, the Q0, Q1, Q1.5, Q3 and Q6 are available representing children of 0, 1, 1.5, 3 and 6 years old. These Q-dummies cover almost all dummy weight groups as defined in ECE-R44. Q10, representing a 10 year-old child, is under development. New child dummy injury criteria are under discussion in EEVC WG12. Therefore, the ECE-R44 criteria are assessed by comparing the existing P-dummies and new Q-dummies in ECE-R44 frontal impact sled tests. In total 300 tests covering 30 CRSs of almost all existing child seat categories are performed by 11 European organizations. From this benchmark study, it is concluded that the performance of the Q-dummy family is good with respect to repeatability of the measurement signals and the durability of the dummies. Applying ECE-R44 criteria, the first impression is that results for P- and Q-dummy are similar. For child seat evaluation the potential merits of the Q-dummy family lie in the extra measurement possibilities of these dummies and in the more biofidelic response.
Accidents with vulnerable road users require special attention within the road safety work because these accidents are often accompanied with severe injuries. Thus In 2006 at least 6200 Powered Two Wheeler (PTW) riders were killed in road crashes in the EU 25 representing 16% of the total number of road deaths while accounting for only 2% of the total kilometers driven. For the prevention of accidents with VRU above all the knowledge of the causes of the accidents is of special importance. This study is based on the methodology of the German In-Depth Accident Study GIDAS. Within GIDAS extensive data on various fields of accidentology are collected on-scene from road traffic accidents with injuries in the Hannover and Dresden area. Using a well defined sample plan the collected data is highly representative to the whole German situation (Brühning et al, Otte et al). The need of in-depth accident causation data in accident research led to the development of a special tool for the collection of such data called ACASS (Accident Causation Analysis with Seven Steps), which was implemented in the GIDAS methodology in 2008 and described by Otte in 2009.
Das Führen von Kraftfahrzeugen der Klasse 2 ist entsprechend der Fahrerlaubnisverordnung nach mehr als zwei epileptischen Anfällen ausgeschlossen. Als Ausnahme gilt eine durch ärztliche Kontrolle nachgewiesene fünfjährige Anfallsfreiheit ohne antiepileptische Behandlung. Im vorliegenden Fall wies ein Lkw-Fahrer mindestens vier epileptische Anfälle auf, eine fünfjaehrige Anfallsfreiheit ohne Medikamente unter ärztlicher Kontrolle ließ sich nicht feststellen. Der letzte Anfall führte zu einem Verkehrsunfall mit anschließendem Gerichtsverfahren. Ursächlich für den Unfall war am ehesten die abgesetzte Medikation. Ein Verfahren hinsichtlich der Ungeeignetheit zum Führen von Kraftfahrzeugen der Klasse 2 wurde eingeleitet.
Since integrated safety systems combine active and passive safety elements in one safety system, it is necessary to define new procedures to evaluate vehicle safety from the overall system point of view. The main goal of the ASSESS project is to develop harmonized and standardized assessment procedures for collision mitigation and avoidance systems. Methods and Data Sources: In ASSESS, procedures are developed for: driver behaviour evaluation, pre-crash system performance evaluation, crash performance evaluation, socio-economic assessment. This paper will concentrate on the activities related to the crash evaluation. The objective is to perform simulations, sled tests and crash tests in order tounderstand the influence of the activation of the pre-crash systems on the occupants" injuries during the crash phase. When a traffic accident is unavoidable, pre-crash systems work on various safety devices in order to improve the vehicle occupants" protection. Braking assistance and adaptive restraint systems are the main pre-crash systems whose effect on the occupants" protection will be described in this paper. Results: The results will be a description of the effect of the activation of the pre-crash systems on the crash phase. Additionally, a set of recommendations for future methodology developments will be delivered. Furthermore, a first approach to the study of the effect of the pre-crash systems activation on the occupants" protection when the impact is unavoidable will be presented. This effect will be quantified using the biomechanical values obtained from the simulation and testing activities and their related injury risks. Simulation and testing activities will consider the following scenarios: - No activation of any pre-crash system, - Activation of one or a combination of several pre-crash systems. In this way, differences in the results obtained from different scenarios will show the effect of each pre-crash system separately during the crash phase. Discussion and Limitations: The set of activities developed in this research project is limited by the fact that with the given resources only a limited number of vehicle models could be investigated. In addition, there are also limitations related to the injury risk curves and the passive safety tools currently on the market. Conclusion and Relevance to session submitted: The paper will present a complete analysis of the effect of pre-crash systems during the crash phase when the impact is unavoidable. Details, limitations and first application experience based on a few examples will be discussed. Currently, there is not any regulation, assessment program, or other similar official procedure able to assess pre-crash systems during the crash phase. This project comprises phases of traffic accidents which have been historically analysed separately, and aims to evaluate them taking into account their interrelationship. ASSESS is one of the first European projects which deals in depth with the concept of integrated safety, defining methodologies to analyse vehicle safety from a global point of view.
As investigations by BASt have shown, a bond between concrete surfaces and bases may be a disadvantage when water penetrates via joints and from the sides if the bond becomes partially detached at an early stage. Free water may penetrate into the area between the concrete surface and the base and build up in areas where the bond is still intact. The high pressure caused by lorry wheels rolling over the pavement causes hydrodynamic pumping. This creates very high flow speeds with considerable corrosion power. This results in the base course surface being eroded in the areas where heavy vehicles drive over the road and may even lead to water and fine particles from the base courses being expelled through the longitudinal joints between the pavement slab and the lower hard shoulder or first overtaking lane. The erosion of the base leads unavoidably to the bearing conditions deteriorating and increased loading of the concrete surface. Cracks may occur and, later stepping-off and tilting of the plates components. This significantly deteriorates the evenness and consequently the service value of the road. This finally leads to a reduction in the service life of the concrete surface. To avoid such damage water which has penetrated must be able to lose pressure and to then seep away. A possible solution is: A nonwoven fabric substance between concrete suface and bound base course. This construction method has proved himselve on numerous test road sections and were rightly included in the new Codes of Practice for the Standardisation of the Upper Structure of Traffic-Bearing Surfaces (Richtlinien für die Standardisierung des Oberbaues von Verkehrsflächen- RStO).
Das Unfallrisiko junger Fahrer - Bestandsaufnahme und Überlegungen zu wirksamen Gegenmaßnahmen
(2010)
Junge Fahrer - vor allem männlichen Geschlechts - haben ein überdurchschnittlich hohes Unfallrisiko. Der Straßenverkehrsunfall ist Todesursache Nummer eins für Jugendliche. Sie haben unter der Bevölkerung den größten Anteil an verlorenen Lebensjahren. Besonders gefährdet sind Motorradfahrer. An Wochenenden und nachts ist die Unfallwahrscheinlichkeit und -häufigkeit extrem. Auch in Ländern, die hohe Anstrengungen unternehmen, um die Sicherheit im Straßenverkehr zu erhöhen und insgesamt erfolgreich sind, zeigt sich, dass die 18- bis 24-Jährigen häufiger verunfallen als die übrigen Verkehrsteilnehmer und schwerere Folgen davontragen. Die jugendliche Persönlichkeit hat einen prädominanten Einfluss auf das Fahrverhalten. Hintergründe dafür sind die hohe Risikobereitschaft, das Spannungs- und Reizbedürfnis, der Wunsch, Grenzen auszuloten sowie Gruppeneinflüsse oder Renommierverhalten. Daneben spielt allerdings auch die geringe Erfahrung eine Rolle, die zu dreierlei Problemen führen kann: - Neulenker sehen oft die Gefahr nicht, in welcher sie sich befinden, oder - sie unterschätzen die wahrgenommene Gefahr,oder - sie ueberschätzen ihre Fahrkunst und glauben, die Gefahr meistern zu können. In den letzten Jahren wurden in verschiedenen Ländern jedoch auch Fortschritte erzielt. Empfehlenswerte Maßnahmen ergeben sich bei der Ausbildung, wo neue Methoden angewandt werden, eine zweite Phase eingeführt wurde, spezielle Kampagnen konzipiert werden oder fahrzeugtechnische Modifikationen veranlasst wurden. Auch die Nachschulung für junge Lenker, wo nötig, zeitigt Wirkung. Weitere Anstrengungen sind je nach Land oder Region notwendig, insbesondere hinsichtlich der Hauptursachen für schwere Unfälle: Geschwindigkeit, Alkohol und Nicht-Anlegen des Sicherheitsgurtes. Hier lassen sich besondere Maßnahmen für Neulenker vorsehen. Daneben müssen gesellschaftliche Einflüsse, etwa die Wirkung der Automobilwerbung und -berichterstattung auf Jugendliche, berücksichtigt werden.
Zum besseren Verständnis der Hirnleistungsanforderungen an das Autofahren wird ein Theorie-Modell erörtert, das aus folgenden drei Stufen in einer Hierarchie besteht: Die oberste Ebene ist die strategische Ebene, die mittlere die taktische und die untere die operationale Ebene. Bezogen auf den Straßenverkehr gehört zu den Entscheidungen auf strategischer Ebene beispielsweise die Überlegung, ob man überhaupt das Auto nehmen muss oder nicht. Hierzu gehört auch die Überlegung, ob man sich grundsätzlich an Geschwindigkeitsbegrenzungen halten will. Charakteristisch für strategische Entscheigungen ist, dass sie prinzipiell getroffen werden, bevor sie in konkretes Handeln umgesetzt werden. Bei den taktischen Entscheidungen geht es ausschließlich um eigenes initiatives Handeln aus der Person selbst heraus ohne äußeren Zwang oder Veranlassung (beispielsweise Überholmanöver, Abbiegen). Zu den operationalen Entscheidungen gehört jedes Reagieren auf äußere Erfordernisse (Beachten von Ampeln und sonstigen Verkehrszeichen, erzwungene Lenk- oder Bremsmanöver). Die meisten neuropsychologischen Untersuchungen beziehungsweise Tests prüfen die operationale Entscheidungsebene. Für die beiden höheren Ebenen ist eine Beurteilung nur möglich, wenn eine entsprechende Beurteilungsgrundlage vorhanden ist oder herangezogen werden kann (zum Beispiel eine praktische Fahrprobe). Die geistigen Fähigkeiten eines Menschen lassen sich ebenfalls in eine dreistufige Hierarchie gliedern: Die unterste Ebene umfasst Hirnleistungen wie Wahrnehmung, Aufmerksamkeit, Sprache, Denken und anderes mehr. Die mittlere Ebene wird konstituiert durch Ziele-Auswahl, Vorplanung, Antizipation als geistige Vorwegnahme der Handlungskonsequenz. Die höchste Hirnfunktion ist die objektive selbstreferenzielle Bewertung, die sich auf Vergangenheit, Gegenwart und Zukunft erstrecken kann.
There is a need for detecting characteristics of pedestrian movement before car-pedestrian collisions to trigger a fully reversible pedestrian protection system. For this purpose, a pedestrian sensor system has been developed. In order to evaluate the effectiveness of the sensor system, the in-depth knowledge of car-pedestrian impact scenarios is needed. This study aims at the evaluation of the sensor system. The accident data are selected from the STRADA database. The accident scenarios available in this database were evaluated and the knowledge of the most common scenarios was developed in terms of the pedestrian trajectory, the pedestrian speed, the car trajectory, the car velocity, etc. A mathematical model was then established to evaluate the sensor system with different detective angles. It was found that in order to detect all the pedestrians in the most common scenarios on time the sensor detective angle must be kept larger than 60 degrees.
Nowadays human-created systems are increasing in complexity due to the interaction of humans and technology. Especially road traffic systems are composed of multitudinous resources (e.g. personnel, vehicles, organizations, etc.), which make it even harder to anticipate the positive and negative effects on safety. One key in achieving a significant reduction of fatalities is seen in driver assistant systems counterbalancing the lack of drivers' capabilities. But the actual outcome of implementing these sophisticated technologies especially on influencing driver's capabilities are yet unknown. Latest research exemplifies an increase of reaction times of drivers in case of dysfunctional driver assistant systems. This research paper applies STAMP/STPA (STAMP = systems-theoretic accident model and processes; STPA = systems-theoretic process analysis) to the German automobile traffic system focusing on the effects of driver assistant systems on drivers. By doing so, the potential hazards caused by technology can be identified.
The proportion of older road users is increasing because of demographic change (in the group 65+ from current 18% to about 24% by 2030). The mobility needs of people 65+ often differ from those of younger people. Seniors (65+) are already more involved in fatal accidents than younger road users. According to the age development, the senior share of road deaths in the EU of today is increasing nearly one-fifth to one-third. From the in-depth analysis of accidents generic simulation models were developed. Attention has been paid both to psycho-physical characteristics as well as on the social and physical environment and their specifics in conjunction with seniors. By simulating the defined scenarios and varying the defined relevant parameters, accident influencing factors were examined as a basis for avoidance. In addition, the parameters were varied to show the influence from the vehicle, the pedestrian and the infrastructure to avoid the accident or to characterize the conditions for which the accident is inevitable.
In a first step, we have examined approximately 23 000 single vehicle accidents within the Austrian National Statistics database. In a second step, we considered 15% of all fatal "running off the road" accidents that occurred in Austria in 2003. As a result, two accident categories were specified; "leaving the road without preceding manoeuvre" and "leaving the road with preceding manoeuvre". These two categories can be basically characterised by the vehicle- heading angle and its velocity angle. In this report, we further suggest theoretical approaches for the dimensioning of a safety zone, an area adjacent to the road free of fixed objects or dangerous slopes. We also show the link between the two accident categories mentioned above and the real world accidents analysed in detail. These observations also form the basis for the required length for safety devices. Finally, we summarise accident avoidance strategies.
The objective of this study was to identify aspects of the individual experience and behaviour of drivers in intersection accidents. A total of 40 accident drivers sketched their ideas and expectations relating to intersection assistance using the method of Structure Formation Technique. Using this method prepared content cards and relation cards for a subject matter are formed together in a structure through the application of an explicit set of rules. The structures generated in this process were compared with the structures of 20 control persons who have not recently experienced an accident at intersections. The basis for this comparison was a case-control design with matched samples regarding the variables age, sex, education, occupation, driving experience and annual mileage. The results of the accident reports indicate that additional assistance is instrumental in the perception of other road users. Generally the interviewed drivers were open-minded towards the use of intersection assistance systems. Drivers who have recently experienced an accident at intersections significantly more often approved of warning assistance in their vehicle than drivers who have not recently experienced an accident. Further accident experienced drivers favoured warning and information via audio warning more frequently. The ideas of the drivers were strongly shaped by the experiences with already available advanced driver assistance systems. Hence acoustic and visual warnings were generally preferred to tactile warnings. The findings also indicate a relationship between the variable age and the acceptance of automatic vehicle intervention, and the suggestion of a head up display as a configuration of a visual warning system.
Airbags are, together with the three-point belt, the most effective passive safety equipment of vehicles. However, literature shows that sound pressure levels of up to 170 dB can occur during airbag deployment. A literature review revealed no systematic experimental data on possible hearing loss by airbag deployment, that also takes any other crash accompanied noise into account, such as deformation and impact noise. Also the rising number of airbags per vehicle resulting in a higher number of deployed airbags in an accident was not addressed with respect to hearing loss. Thus, an extensive test matrix of noise measurements during airbag deployments was conducted including onboard measuring during crashes and static measurements. Dynamic and static experiments with single and multiple airbag deployments were conducted. The results of this study show, that in the analyzed crash constellations the acoustic emission of the collision as well as the car deformation can trigger the stapedius reflex before the airbag deployment. The stapedius reflex protects the inner ear at least partially in case of dangerous sound levels. However, it seems that multiple airbag deployments in a short sequence pose a considerable risk for hearing impairments despite the fully contracted stapedius muscle. Further and in line with Price et al. (2013) it was found that the risk of hearing loss is lower with closed windows. The analysis of patient and accident data showed no link between airbag deployment and hearing loss. This might be caused by low case numbers of reported hearing loss problems up to now. In conclusion the results show that a singular analysis of the sound pressure of airbag deployments without crash accompanied noises is not sufficient as the protective effect of the stapedius reflex is neglected. Still, successive airbag deployments in a short timeframe raise the risk of hearing loss. Further investigation on hearing impairment due to airbag deployment and triggering of the stapedius reflex is needed and the data acquisition of accidents and patients should consider hearing loss aspects.
Systematik zur Bewertung der Auswirkungen von Sicherheitseinrichtungen im Kraftfahrzeug (BASE)
(2000)
BASE kann als eine Art "Guide" zur Unterstützung im Prozess der Evaluation von Informations- und Sicherheitseinrichtungen (ISE) in Hinblick auf psychologische Auswirkungen eingesetzt werden. Es ist in Bewertungsbereiche gegliedert, die ihrerseits wiederum den verschiedenen Phasen der Marktdurchdringung zugeordnet sind: (1) Phase vor der eigentlichen Nutzung, (2) Phase der Nutzung und (3) Phase nach vorangeschrittener Diffusion der neuen Technologie. Für die Entwicklung von Informations- und Sicherheitseinrichtungen im Fahrzeug ist es erforderlich, die Sicherheitsanforderungen an solche Einrichtungen zu definieren. Hier stellt das vorliegende Bewertungssystem BASE einen umfassenden Rahmen dar. Ebenso lässt es sich zur Bewertung bereits bestehender Einrichtungen heranziehen. Dabei stehen neben den sensorischen, kognitiven, motivationalen, affektiven und verhaltensbezogenen Reaktionen einer Person auch die Auswirkungen der ISE auf die Sicherheit des Verkehrssystems zur Bewertung an. In diesem Zusammenhang werden der Prozess der reaktiven Verhaltensanpassung und der Marktdurchdringung als Einflussfaktoren auf die Verkehrssicherheit diskutiert.
Innovative Zugangstechniken und digitale Bildauswertung für die Bauwerksprüfung im Zuge von Straßen
(2019)
Deutschland braucht ein zuverlässiges Straßenverkehrssystem. Dafür müssen die Zustände der Brücken und sonstigen Ingenieurbauwerke der Straßen kontinuierlich und umfassend bekannt um rechtzeitig handeln zu können. Neben der regulären visuellen Bauwerksprüfung nach DIN 1076 bieten neue innovative Verfahren große Möglichkeiten der Zugangs- sowie Bilderfassungs- und Bildverarbeitungstechnik. Diese Möglichkeiten gilt es jetzt systematisch zu erkunden und für den Einsatz aufzubereiten
Die Infrastruktur und hierbei vor allen die Straßen, stellen eine grundlegende Voraussetzung zur wirtschaftlichen Entwicklung eines Landes dar. Dieses bedeutet einerseits eine Notwendigkeit der Anpassung an zunehmenden Verkehr durch Um- und Ausbauten des Straßennetzes. Andererseits bestehen viele Netze, vor allem in den Industrienationen, schon eine geraume Zeit und sind somit dem Verkehr und weiteren äußeren Einflüssen ausgesetzt. Dieses führt dazu, dass da Thema "Erhaltung der Infrastruktur" verstärkt in das Bewusstsein der handelnden Personen und Organisationen gelangen muss. Bei der Erhaltung der Straßeninfrastruktur sind neben technischen auch rechtliche Aspekte von erheblicher Bedeutung. Die Planung, der Bau und die Unterhaltung von Straßen mit allen zugehörigen Straßenbestandteilen werden aus öffentlichen Mitteln finanziert. Somit sind hierbei die Grundsätze der Wirtschaftlichkeit und Sparsamkeit zu beachten. Hierfür kann die Bauwerksprüfung wichtige Informationen zu Konstruktion, Schäden und Schadensveränderungen liefern. Daneben gibt es aber auch die sogenannte allgemeine Verkehrssicherungspflicht. D.h. dass derjenige, der eine Gefahrenquelle schafft oder unterhält, die Pflicht hat, die notwendigen und zumutbaren Vorkehrungen zu treffen um Schäden anderer zu verhindern. Vor diesem Hintergrund und da die DIN 1076 für ihren Bereich als allgemein anerkannte Regel der Technik angesehen werden kann, ist diese Norm auch für diejenigen Bauträger als verbindlich anzusehen, die diese nicht explizit eingeführt haben.
Nach grundsätzlichen Einführungsüberlegungen wird zunächst die Frage der Akzeptanz und die Notwendigkeit, bei der Entwicklung und Erprobung von Maßnahmen, Vertreter der Erziehungsinstanzen möglichst frühzeitig und umfassend zu beteiligen, angesprochen. Diese Forderung einer engen Abstimmung und Zusammenarbeit von Forschungspraxis, Umsetzungspraxis und Erziehungspraxis gilt auch für die Entwicklung, die Erprobung, die Umsetzung, die anschließenden Wirksamkeitskontrollen, die Interpretation der Ergebnisse und die Auswahl der die weitere Umsetzung korrigierenden Informationen. Im folgenden werden zwei weitere wichtige Wirksamkeitsbedingungen ausführlicher behandelt: die Entwicklungsorientierung und der Situationsbezug, d.h. die Orientierung der Maßnahme an der Umgebung des Kindes, die als konkrete Verkehrswirklichkeit den Raum bildet, in dem das Kind lebt und aufwächst. Als konkrete Beispiele für das ineinandergreifen deduktiv theoretischer Ableitungen und praktischer Erfahrungen bei der Entwicklung von verkehrspädagogischen Maßnahmen werden das Programm "Kind und Verkehr", der Kinderverkehrsclub, das Entwicklungsprojekt "Verkehrserziehung im Kindergarten" erwähnt. Als mehr formale Bedingungen, die für die Wirksamkeit einer Maßnahme wichtig sind, werden deren Kontinuität, aber auch grundsätzliche Veränderbarkeit herausgearbeitet.
Ausgehend von der negativen Entwicklung der Statistik von Unfällen, bei denen Kinder als Radfahrer verletzt werden, diskutiert der Autor Maßnahmen, die die Sicherheit dieser Verkehrsteilnehmergruppe erhöhen können. Der Autor geht in seinen Betrachtungen auf folgende Felder ein: Erziehung und Aufklärung im schulischen und außerschulischen Sektor, Verkehrsüberwachung für den fließenden und ruhenden Verkehr unter besonderer Berücksichtigung zugeparkter Gehwege, Radwege und anderer Verkehrsflächen, Gesetzgebung und Rechtsprechung, Konstruktion von Kinderfahrrädern, politische und Verwaltungsentscheidungen auf allen Ebenen, Kauf und Verkauf von Kinderfahrrädern, Darstellung der Gefährdung von radfahrenden Kindern in den Medien sowie Anstrengungen von Wissenschaft und Forschung.
Nach grundsätzlichen Einführungsüberlegungen wird zunächst die Frage der Akzeptanz und die Notwendigkeit, bei der Entwicklung und Erprobung von Maßnahmen, Vertreter der Erziehungsinstanzen möglichst frühzeitig und umfassend zu beteiligen, angesprochen. Diese Forderung einer engen Abstimmung und Zusammenarbeit von Forschungspraxis, Umsetzungspraxis und Erziehungspraxis gilt auch für die Entwicklung, die Erprobung, die Umsetzung, die anschließenden Wirksamkeitskontrollen, die Interpretation der Ergebnisse und die Auswahl der die weitere Umsetzung korrigierenden Informationen. Im folgenden werden zwei weitere wichtige Wirksamkeitsbedingungen ausführlicher behandelt: die Entwicklungsorientierung und der Situationsbezug, d.h. die Orientierung der Maßnahme an der Umgebung des Kindes, die als konkrete Verkehrswirklichkeit den Raum bildet, in dem das Kind lebt und aufwächst. Als konkrete Beispiele für das ineinandergreifen deduktiv theoretischer Ableitungen und praktischer Erfahrungen bei der Entwicklung von verkehrspädagogischen Maßnahmen werden das Programm "Kind und Verkehr", der Kinder-Verkehrs-Club, das Entwicklungsprojekt "Verkehrserziehung im Kindergarten" erwähnt. Als mehr formale Bedingungen, die für die Wirksamkeit einer Maßnahme wichtig sind, werden deren Kontinuität, aber auch grundsätzliche Veränderbarkeit herausgearbeitet.
Bitumen ist ein Erdölprodukt mit einer komplexen chemischen Zusammensetzung. Durch die Auswahl der zur Herstellung verwendeten Rohöle und die Art des Raffinerieprozesses werden die Zusammensetzung und die resultierenden chemisch-physikalischen Eigenschaften bestimmt. Für die Untersuchung von Bitumen steht heute eine Vielzahl von leistungsfähigen Methoden der modernen instrumentellen Analytik zur Verfügung. Das Hauptproblem bei der Analyse von Bitumen besteht in der Auftrennung des Stoffgemisches. Chromatographische Verfahren bieten generell die besten Voraussetzungen derartige Trennaufgaben zu bewältigen. So ermöglicht die TLC-FID-Methode die quantitative Bestimmung der Stoffgruppen der Aliphaten, Aromaten, Harze und Asphaltene. Dagegen ermöglicht die klassische Dünnschichtchromatographie, die in der Vergangenheit ausschließlich zum Nachweis von teerhaltigen Bindemitteln eingesetzt wurde, eine einfache und schnelle Möglichkeit eine chemische Charakterisierung von Bitumen in Form eines "Fingerprints" vorzunehmen. Dem Anspruch eine möglichst exakte und vollständige Beschreibung der chemischen Zusammensetzung von Bitumen zu erhalten, stehen Begrenzungen hinsichtlich der Wirtschaftlichkeit und Schnelligkeit der Verfahren gegenüber. Dennoch ist es möglich, mit einem relativ begrenzten Aufwand wertvolle Informationen über die chemische Beschaffenheit zu erhalten.
The case study "Digital Test Area Autobahn" is presented. A new built (September 2016) pre-stressed concrete bridge is equipped with different monitoring systems for the detection of traffic load, climatic influence and the reaction of the bridge. Possibilities for the implementation of a VoI (Value of Information) analyses are presented.
This study investigates the protection offered by passive head-restraints with different stiffness and energy dissipation properties. For this purpose, computational multi-body models of a generic car seat and a biofidelic 50thpercentile male human for rear impact are used to study different seat designs and passive head-restraints. The validated seat-occupant model is also used in the design of two different car-seat models which are shown to effectively mitigate whiplash by utilising a crash-energy distribution technique. Five different passive head-restraints with varying stiffness (low-medium-high) and energy dissipation percentages (low-high) are successively attached to four different car-seat models. The simulation results indicate that the protection offered by head restraints is strongly dependent on the seat design. It has also been shown that the stiffness of the passive head-restraint has much more influence on whiplash-risk in comparison to its energy dissipation capacity.
In road traffic accidents, a car-seat and its occupant can be subjected to various crash pulses in the case of a rear impact. This study investigates the influence of crash pulse shape on seat-occupant response and evaluates the corresponding risk of whiplash injury. For this purpose, a rigorously validated seat-occupant system model is used to study different carseat designs and crash pulses. Two different car-seat concepts are also presented which can effectively mitigate whiplash injury for a wide range of crash severity. It is shown that for crash pulses of similar severity, the level of whiplash-risk depends strongly on the combined effects of seat design and crash pulse shape.
Die Europäischen Normen für Erdarbeiten werden im CEN/TC 396 "Earthworks" erarbeitet. Das Sekretariat des CEN/TC 396 wird vom französischen Normungsinstitut AFNOR gehalten. Die Normungsarbeit wird im DIN-Ausschuss NA 005-05-22 AA "Erdarbeiten (SpA zu CEN/TC 396), Gemeinschaftsausschuss mit FGSV GA 5.01" gespiegelt. Vertreter des Spiegelausschusses arbeiten in den verschiedenen Arbeitsgruppen (Working Groups (WG)) des CEN/TC 396 mit. In den Jahren 2009 und 2010 wurden die Gremien konstituiert und mit der Normungsarbeit begonnen, zunächst überwiegend durch die Zusammenstellung der vorhandenen Regelungen in den Mitgliedsstaaten (siehe auch Beitrag Vogel/Leister/Heyer zur Erd- und Grundbautagung 2013). Im November 2014 wurden vom CEN/TC 396 die Arbeitsaufträge ("work items") offiziell gestartet.
Die Europäischen Normen für Erdarbeiten werden im CEN/TC 396 "Earthworks" erarbeitet. Das Sekretariat des CEN/TC 396 wird vom französischen Normungsinstitut AFNOR gehalten. Die Normungsarbeit wird im DIN-Ausschuss NA 005-05-22 AA "Erdarbeiten (SpA zu CEN/TC 396), Gemeinschaftsausschuss mit FGSV GA 5.01" gespiegelt. Vertreter des Spiegelausschussesarbeiten in den verschiedenen Arbeitsgruppen (working groups (WG)) des CEN/TC 396 mit. In den Jahren 2009 und 2010 wurden die Gremien konstituiert und mit der Normungsarbeit begonnen, zunächst überwiegend durch die Zusammenstellung der vorhandenen Regelungen in den Mitgliedsstaaten (siehe auch Beitrag Vogel/Leister/Heyer zur Erd- und Grundbautagung 2013). Im November 2014 wurden vom CEN/TC 396 die Arbeitsaufträge("work items") offiziell gestartet.
Bankette dienen im Wesentlichen der Verkehrssicherheit und dem Schadstoffrückhalt. Sie müssen dauerhaft standfest sein, damit abkommende Fahrzeuge, insbesondere schwere Lkw, nicht einsinken und verunfallen. Zum Grundwasserschutz müssen sie aber auch die Schadstoffe aus dem Straßenabfluss, der im Bankett versickert, zurückhalten. Der Schadstoffrückhalt im Bankett erfolgt vorwiegend durch mechanische Filtration. Diese wird vor allem durch die sandigen und schluffigen Kornfraktionen im Bankettmaterial bewirkt. Ist ihr Anteil aber zu hoch, nehmen die Standfestigkeit und die Tragfähigkeit ab. Es gilt, diese gegenläufigen Anforderungen an die Zusammensetzung von Bankettmaterial zu optimieren. Die Untersuchungsansätze und erste Ergebnisse der dazu beauftragten Forschung werden im Beitrag vorgestellt. Mit den Feinpartikeln aus dem Straßenabfluss und der Vegetation "wachsen" Bankette im Laufe der Jahre auf. Damit der Straßenabfluss nicht behindert wird und Aquaplaning auftritt, müssen Bankette regelmäßig geschält werden. Das bei dieser Reprofilierung anfallende Bankettschälgut ist grundsätzlich als Abfall einzustufen. Die dadurch bedingten Einschränkungen bei der Verwendung oder Verwertung sind in der "Richtlinie zum Umgang mit Bankettschälgut" beschrieben. Die dort aufgezeigten Möglichkeiten werden vorgestellt. Wenn das Bankettschälgut nicht innerhalb des Straßenbauwerks verbleiben kann, sollte es im Sinne der Ressourcenschonung verwertet werden. Bankettschälgut besteht zu circa 90 Masse-Prozent aus mineralischen Bestandteilen, die wieder für Bauzwecke genutzt werden können, wenn es durch eine geeignete Aufbereitung gelingt, die überwiegend pflanzlichen Anteile (Mähgutreste und Wurzeln) deutlich zu reduzieren. Aus einer Forschungsarbeit zu Kosten und Nutzen der Aufbereitung von Bankettschälgut werden der derzeitige Stand dargestellt und Perspektiven für eine werterhaltende Nutzung von Bankettschälgut aufgezeigt.
Es ist Tradition in der Forschungsgesellschaft, an den Anfang von Arbeitsgruppentagungen den Tätigkeitsbericht des Arbeitsgruppenleiters zu stellen. Die Tätigkeiten im Berichtszeitraum zwischen 2010 und 2013 spiegeln sich in den Vorträgen über Ergebnisse und abgeschlossene Aktivitäten wider. Der Bericht ist deshalb auf Veränderungen und Entwicklungen fokussiert, die seit der Erd- und Grundbautagung 2010 stattgefunden haben. Das betrifft organisatorische und personelle Veränderungen in der Arbeitsgruppe, laufende und geplante Forschungsvorhaben und Regelwerke. Bei den vielfältigen Themen und Aufgaben der Arbeitsgruppe werden für weitergehende Informationen die nachfolgenden Beiträge der Tagung 2013 und die Road Maps und Steckbriefe der Gremien auf der Internetseite der FGSV empfohlen.
Die Länderarbeitsgemeinschaften Bodenschutz (LABO), Abfall (LAGA) und Wasser (LAWA) haben im September 2005 das Bundesumweltministerium gebeten, bundeseinheitliche, rechtsverbindliche Anforderungen an die Verwertung von mineralischen Abfällen in technischen Bauwerken und in bodenähnlichen Anwendungen zu regeln. Die Umweltministerien der Länder haben in ihren Stellungnahmen zum 2. Arbeitsentwurf der Mantelverordnung Forderungen gestellt, bei deren Umsetzung der Einsatz von mineralischen Ersatzbaustoffen im Verkehrswegebau stark eingeschränkt und unwirtschaftlich würde. Der Wille zur Schonung natürlicher Ressourcen ist nicht erkennbar. Anforderungen an Straßenbauwerke, an den Umweltschutz und an die Kreislaufwirtschaft konkurrieren in vielen Bereichen miteinander. Im Gesetzgebungsverfahren sind bisher trotz Gesprächen zwischen den Ressorts auf Arbeitsebene in grundlegenden Aspekten keine Einigung oder von Allen tragbare Kompromisse erzielt worden. Der Verkehrswegebau ist Hauptabnehmer der Ersatzbaustoffe, geht mit großen Mengen des Primärbaustoffs "Boden" um, ist aber auch "Abfallerzeuger". In der Mantelverordnung werden Regelungen getroffen, die stark in die Belange des Straßenbaus eingreifen. Aus diesem Grund ist die Beteiligung der Straßenbauverwaltung erforderlich, um die bautechnische und bauvertragliche Kompetenz sicher zu stellen, das Potenzial für Boden- und Grundwasserschutz auszuschöpfen und natürliche Ressourcen zu schonen. Die wichtigsten Aspekte zum umweltgerechten Einsatz von Boden und Ersatzbaustoffen aus der Sicht des Straßenbaus werden vorgestellt.
Die Länderarbeitsgemeinschaften Bodenschutz (LABO), Abfall (LAGA) und Wasser (LAWA) haben im September 2005 das Bundesumweltministerium gebeten, bundeseinheitliche, rechtsverbindliche Anforderungen an die Verwertung von mineralischen Abfällen in technischen Bauwerken und in bodenähnlichen Anwendungen zu regeln. Die Umweltministerien der Länder haben in ihren Stellungnahmen zum 2. Arbeitsentwurf der Mantelverordnung Forderungen gestellt, bei deren Umsetzung der Einsatz von mineralischen Ersatzbaustoffen im Verkehrswegebau stark eingeschränkt und unwirtschaftlich würde. Der Wille zur Schonung natürlicher Ressourcen ist nicht erkennbar. Anforderungen an Straßenbauwerke, an den Umweltschutz und an die Kreislaufwirtschaft konkurrieren in vielen Bereichen miteinander. Im Gesetzgebungsverfahren sind bisher trotz Gesprächen zwischen den Ressorts auf Arbeitsebene in grundlegenden Aspekten keine Einigung oder von Allen tragbare Kompromisse erzielt worden. Der Verkehrswegebau ist Hauptabnehmer der Ersatzbaustoffe, geht mit großen Mengen des Primärbaustoffs "Boden" um, ist aber auch "Abfallerzeuger". In der Mantelverordnung werden Regelungen getroffen, die stark in die Belange des Straßenbaus eingreifen. Aus diesem Grund ist die Beteiligung der Straßenbauverwaltung erforderlich, um die bautechnische und bauvertragliche Kompetenz sicher zu stellen, das Potenzial für Boden- und Grundwasserschutz auszuschöpfen und natürliche Ressourcen zu schonen. Die wichtigsten Aspekte zum umweltgerechten Einsatz von Boden und Ersatzbaustoffen aus der Sicht des Straßenbaus werden vorgestellt.
Es ist Tradition in der Forschungsgesellschaft, an den Anfang von Arbeitsgruppentagungen den Tätigkeitsbericht des Arbeitsgruppenleiters zu stellen. Die Tätigkeiten im Berichtszeitraum zwischen 2007 und 2010 spiegeln sich in den Vorträgen über Ergebnisse und abgeschlossene Aktivitäten wider. Der Bericht ist deshalb auf Veränderungen und Entwicklungen fokussiert, die seit der Erd- und Grundbautagung 2007 stattgefunden haben. Das betrifft organisatorische und personelle Veränderungen in der Arbeitsgruppe, laufende und geplante Forschungsvorhaben und Regelwerke. Außerdem ist über die Europäische Normung der Erdarbeiten und die Aktivitäten zur nationalen Spiegelung zu berichten. Bei den vielfältigen Themen und Aufgaben der Arbeitsgruppe werden für weitergehende Informationen die Road Maps und Steckbriefe der Gremien auf der Internetseite der FGSV empfohlen.
Im Jahr 2009 wurde CEN/TC 396 „Erdarbeiten“ mit der Zielsetzung gegründet, erstmalig europäische Normen für Erdarbeiten zu erarbeiten. Durch eine einheitliche Grundlage für Erdarbeiten in den EU-Ländern sollen Handelshemmnisse vermieden und die Nutzung und Schonung natürlicher Ressourcen verbessert werden. Länder mit bestehenden nationalen Regelwerken, z. B. im Eisenbahn- oder Straßenbau, können diese weiterhin anwenden und gleichzeitig Erfahrungen mit der europäischen Norm sammeln. Gespiegelt werden die Arbeiten vom NA 005-05-22 AA „Erdarbeiten (SpA zu CEN/TC 396 und CEN/TC 396/WG 1 bis WG 8), Gemeinschaftsausschuss mit FGSV“ im DIN-Normenausschuss Bauwesen. Von allen Beteiligten wurde in den letzten Jahren großes Engagement in die Erarbeitung und Begleitung der ersten sechs Teile der Normenreihe EN 16907 eingebracht. Ihre Veröffentlichung wird im April 2019 erwartet. Bereits 2017 wurde DIN CEN/TS 17006 (DIN SPEC 1035), Erdarbeiten – Flächendeckende dynamische Verdichtungskontrolle (FDVK) veröffentlicht. Der Norm-Entwurf zu DIN EN 16907-7, Erdarbeiten – Teil 7: Hydraulische Einbringung von mineralischen Abfällen befindet sich derzeit in der CEN-Umfrage. Diese erste Generation der europäischen Erdbaunormen stellt im Ergebnis den derzeitigen Konsens im europäischen Raum dar und geht den ersten Schritt in Richtung Harmonisierung. Zudem wird eine Übersicht über die nationale Praxis der verschiedenen Länder gegeben. Sie bietet somit für ausführende Unternehmen eine Hilfestellung, da diese einen Überblick über die Regelwerke der jeweiligen Länder erhalten. In neuen Arbeitsgruppen des CEN/TC 396 haben bereits die Arbeiten an weiteren Normungsvorhaben begonnen. Ein Technical Report (CEN/TR) zum Einsatz von sekundären Rohstoffen befindet sich in der Erarbeitung, und eine Arbeitsgruppe befasst sich mit erdbauspezifischen Prüfverfahren. Diese neuen Themen werden ebenfalls durch den NA 005-05-22 AA gespiegelt. Für die nächste Generation europäischen Erdbaunormen wird der NA 005-05-22 AA gemeinsam mit den Gremien der Forschungsgesellschaft für Straßen- und Verkehrswesen (FGSV) eine auf den Erfahrungen mit der neuen Normenreihe basierende Liste mit Änderungserfordernissen vorbereiten, die bei der nächsten turnusmäßigen Überprüfung im Sommer 2023 von deutscher Seite eingebracht werden soll.
Es wird der Frage nachgegangen, mit welchen statistischen Verfahren der simultane Vergleich mehrerer Messwerte verschiedener Testverfahren vorgenommen werden kann. Hierzu werden vier Methoden vorgestellt: der multiple Vergleich, die ANOVA-Varianzanalyse, die Methode der multiplen Endpoints sowie die Akkumulationsstatistik. Die Demonstration erfolgt an den Merkmalen periphere Wahrnehmung, Daueraufmerksamkeit, Tachistoskop, Tracking und mittlere Entscheidungszeit. Untersucht wurden 2 mal 13 Probanden (Methadon- und Kontrollgruppe). Es zeigte sich, dass die Akkumulationsstatistik eine optimale, für die Thematik äquivalente Bewertung für mehrere simultan gemessene fahrrelevante Leistungen darstellt. Voraussetzung für den Einsatz ist allerdings, dass die Verkehrswissenschaften sich über Art, Umfang und Gewichtung der verschiedenen Komponenten der fahrrelevanten Leistungen einig sind.
In most of developed countries, the progress made in passive safety during the last three decades allowed to drastically reduce the number of killed and severely injured especially for occupants of passenger cars. This reduction is mainly observed for frontal impacts for which the AIS3+ injuries has been reduced about 52% for drivers and 38% for front passengers. The stiffening of the cars' structure coupled with the generalization of airbags and the improvement of the seatbelt restraint (load limiter, pretension, etc.) allowed to protect vital body regions such as head, neck and thorax. However, the abdomen did not take advantage with so much success of this progress. The objective of this study is to draw up an inventory on the abdominal injuries of the belted car occupants involved in frontal impact, to present adapted counter-measures and to assess their potential effectiveness. In the first part the stakes corresponding to the abdominal injuries will be defined according to types of impact, seat location, occupants' age and type of injured organs. Then, we shall focus on the abdominal injury risk curves for adults involved in frontal impact and on the comparisons of the average risks according to the seat location. In the second part we will list counter-measures and we shall calculate their effectiveness. The method of case control will be used in order to estimate odds ratio, comparing two samples, given by occupants having or not having the studied safety system. For this study, two type of data sources are used: national road injured accident census and retrospective in-depth accident data collection. Abdominal injuries are mainly observed in frontal impact (52%). Fatal or severe abdominal occupant- injuries are observed at least in 27% of cases, ranking this body region as the most injured just after the thorax (51%). In spite of a twice lower occupation rate in the back seats compared to the front seats, the number of persons sustaining abdominal injuries at the rear place is higher than in the front place. In recent cars, the risk of having a serious or fatal abdominal injury in a frontal impact is 1.6% for the driver, 3.6% for the front passenger and 6.3% for the rear occupants. The most frequently hurt organs are the small intestine (17%), the spleen (16%) and the liver (13%). The most common countermeasures have a good efficiency in the reduction of the abdominal injuries for the adults: the stiffness of the structure of the seats allows decreasing the abdominal injury risk from 54% (driver) to 60% (front occupant), the seatbelt pretensioners decrease also this risk from 90% (driver) to 83% (front passenger).
Rollovers continue to be a major source of heavy truck fatalities when compared to other accident modes. Real world rollover accidents are analyzed and two distinct damage patterns are identified. Damage to heavy truck roofs can occur from lateral loading that transitions to vertical roof loading as the vehicle rolls onto its side and then over onto its roof. A second load path can occur when the vehicle has rolled onto its side and furrows into the ground generating large longitudinal friction forces between the roof and ground. A review of the previous literature and various test methodologies are presented. A sled impact test methodology is presented which allows for structural assessment of a heavy truck cab's crashworthiness in both of these loading environments. Two test series are presented using the sled impact test methodology in order to analyze real world truck rollovers using varying impact platen and contact angles. The structural deformation and failure patterns were found to be consistent with damage seen in real world accident vehicles. In each case, a second equivalent truck cab was then reinforced and tested under similar conditions to evaluate the energy management and crush resistance of a stronger cab structure. These structural reinforcements demonstrated a substantial reduction in roof crush and protected the survival space of the occupant compartment. The sled impact test procedure is an effective method for testing the structural performance of a heavy truck cab in a variety of loading scenarios comparable to real world accidents and ascertaining the load and energy load levels in these accident modes.
Diese Studie erfolgte als eine erste Prüfung der Frage, ob 0,1 Promille als Sicherheitszuschlag für eine Bestimmung eines Blutalkoholwertes von 0,1 Promille aus Gründen der Messunsicherheit angebracht und ausreichend ist. Beides trifft zu. Obwohl zur Zeit der Studie noch nicht bei oder unter 0,2 Promille kalibriert wurde, bestimmten alle Labors eine Blutalkoholkonzentration von 0,08 Promille mit einem Wert unter 0,18 g/L (Cmax ADH: 0,15 g/L = CmaxGC: 0,15 g/L = Blutalkoholkonzentration (BAK) von 0,12 Promille). Es bestand kein Bias zwischen beiden Verfahren. Festgestellte Standabweichungen: ADH: 0,021 g/L, GC: 0,025 g/L. Ein Sicherheitszuschlag von 0,1 Promille auf 0,1 Promille umfasst demnach vier Standardabweichungen und bietet für die neue Regelung im Paragrafen 24 Straßenverkehrsgesetz (StVG) bei der richtliniengemäß ausgeführten forensischen Blutalkoholbestimmung genügend Analysensicherheit.
Der Beitrag setzt sich mit folgenden Fragestellungen auseinander: 1. Stellen ältere Kraftfahrer ein Sicherheitsrisiko für den Straßenverkehr dar? 2. Wie wurden diese Frage und die "Fahreignung und Fahrtüchtigkeit älterer Kraftfahrer" in den vergangenen 50 Jahren wissenschaftlich bewertet - insbesondere bei Kongressen der Deutschen Gesellschaft für Verkehrsmedizin und den Deutschen Verkehrsgerichtstagen? 3. Wie haben in den vergangenen 50 Jahren Juristen, Behörden und Gesetzgeber die "Fahreignung älterer Kraftfahrer" gesehen und umgesetzt? 4. Werden morbiditäts- und altersbedingte Beeinträchtigungen der Leistungsfähigkeit rechtzeitig und richtig durch ältere Kraftfahrer erkannt? 5. Wie gehen ältere Kraftfahrer mit erkannten Leistungsmängeln um? 6. Benötigen ältere Verkehrsteilnehmer Aufklärung, Beratung, Fortbildung und Vorsorge- oder Kontrolluntersuchungen? Insgesamt kann festgestellt werden, dass allein aus normalem Altersabbau und hohem Alter kein Rückschluss auf die Fahruntauglichkeit gezogen werden kann. Das wichtigste gesellschaftliche Ziel für die Teilnahme älterer Menschen am Straßenverkehr ist - angesichts der demographischen Entwicklung - die Einsichtsfähigkeit in das altersbedingt verminderte Leistungsvermögen und den Veränderungswillen zu Kompensationsmechanismen bei älteren Verkehrsteilnehmern zu schärfen. Der behandelnde Arzt, Angehörige und sonstige Bezugspersonen sollten alles tun, um den bejahrten Kraftfahrer zu motivieren, sich seiner Selbstverantwortung bewusst zu werden und demgemäß zu handeln.
Es wird ein Überblick zur Thematik Lärm an Fahrbahnübergängen mit technischen Entwicklungen zur Lärmminderung gegeben. Dabei wird eingegangen auf die Anforderungen und Einsatzkriterien von Fahrbahnübergängen, aktuelle Forschungsvorhaben und -ergebnisse sowie auf Erfahrungen mit den verschiedenen Ausführungsarten von Fahrbahnübergängen, bei denen sich durch konstruktive Veränderungen oder Ergänzungen Lärmminderungen ergaben. Angesprochen werden auch die Inhalte und neuesten Entwicklungen bei der Europäischen Technischen Zulassungsleitlinie für Fahrbahnübergänge, die ETAG FÜ. Diese ETAG enthält Regelungen für verschiedene Familien von Fahrbahnübergängen, nämlich Unterflurübergänge, Fahrbahnübergänge aus Asphalt, Fahrbahnübergänge mit einem Dehnprofil, Mattenübergänge, Fingerübergänge, Rollverschlüsse und Lamellenübergänge. In einem Ausblick werden folgende Themen angesprochen: Überarbeitung der Regelwerke ZTV-ING und TL/TP-FÜ, Einführung der ETAG FÜ und die Berücksichtigung aus den Ergebnissen der Forschungsvorhaben, insbesondere aus dem Forschungsvorhaben "Leiser Straßenverkehr 2".
Schäden an Betonfahrbahnen sind fast immer auf das Eindringen von Wasser unter die Betonplatte zurückzuführen. Für die Erprobung von Entwässerungseinrichtungen wurden Versuchsstrecken auf den Autobahnen A5 (Frankfurt -Mörfelden), A7 (bei Dorfmark und Soltau) sowie der A 29 (Bei Sage) eingerichtet, bei denen verschiedene Maßnahmen (Längsentwässerung, Punktentwässerung, Flachdrainage) auf ihr Verhalten beobachtet werden.
Mit der Änderung des deutschen Straßenverkehrsrechtes werden Voraussetzungen für die amtliche Anerkennung von Anbietern von Kursen zur Wiederherstellung der Fahreignung gesetzlich konkretisiert. Das Instrument einer bundeseinheitlichen Qualitätssicherung wird per Gesetz verbindlich eingeführt. Mit der Überprüfung wird die Bundesanstalt für Straßenwesen als neutrale Stelle beauftragt. Es wird davon ausgegangen, dass es sich bei den Kursen zur Wiederherstellung der Eignung von Kraftfahrzeugführern um Maßnahmen der Personalzertifizierung handelt. Das Referat beschreibt den Ablauf des Akkreditierungsverfahrens und die Anforderungen an Maßnahmenträger, die einen Antrag auf Akkreditierung gestellt haben. Bei den Anforderungen an die Kursleiter spielen die berufliche Qualifikation sowie solche Anforderungen eine Rolle, die sich aus dem jeweiligen Qualitätssicherungssystem ergeben. In der Akkreditierung der Anbieter von Kursen zur Wiederherstellung der Fahreignung durch die Bundesanstalt für Straßenwesen wird nicht nur eine Bestätigung der Qualität und Fachkompetenz gesehen, sondern zugleich auch eine Gewähr für die Durchführung der jeweiligen Kurse nach bundeseinheitlichen Kriterien.
Road transport networks are of major importance for the economy and equally for the mobility of the citizens in the European countries. In order to improve the protection of transport infrastructures and the robustness of the European road network research projects are currently in process on national and European level. A main focus of these investigations is to analyze the specific vulnerabilities of bridges and tunnels concerning structural, operational and organizational aspects and to identify critical objects. But also infrastructures, which are critical due to their location and function in a road network, must be identified. For this the resulting regional and supra-regional impacts due to the failure of certain infrastructures have to be investigated on network level. In order to increase the security of road transport infrastructures and whole road networks the most effective security measures have to be determined. This paper gives an overview about the content and first results of current European and German research projects on road transport security.
A very high service availability is important for the operator and for the user of road tunnels, too. The service availability of a structure is directly related to its quality. The earlier quality assurance measures are being considered during the life cycle, the better a structure of high quality can be guaranteed. Problems which occur during the operation period of a structure often result from design errors or from inadequate realisation during the construction phase. They may also occur as a result of wrongly planned maintenance and refurbishment works. Thus, the transfer of specific data, information and experiences through the whole life cycle is very important. In this context methods of facility management can provide efficient assistance when they have already been used throughout all three classic phases of a structure's life cycle - planning, construction and operation. Finally the tunnel drainage system of German road tunnels is considered as an example as practical application possibility.
Data concerning accidents involving personal injury which have been collected in the context of in-depth investigations on scene in the Hannover area since 1973 and in the Dresden area since 1999 represent an important basis for empirical traffic safety research. At national and international level various analyses and comparisons are carried out on the basis of "in-depth data" from the above mentioned investigations. In-depth data play a decisive role e.g. within the validation of EuroNCAP results on secondary safety (crashworthiness) of individual passenger car models. Thus, statistically sound methods of data analysis and population parameter estimation are of high importance. Since the 1st of August 1984 the "in-depth investigations on scene" in the Hannover area have been carried out according to a sampling plan developed by HAUTZINGER in the context of a research project on behalf of BASt. In the meantime a second region of in-depth investigation on scene was added with surveys in Dresden and the surrounding area. Internationally, the acronym GIDAS (German In-Depth Accident Study) is commonly used for the two above mentioned surveys. The objective of a current research project (topic of this contribution) is, among other things, to examine and adjust the previous weighting and expansion method for the two regional accident investigations to the current general conditions.
Empirical vehicle crashworthiness studies are usually based on national or in-depth traffic accident surveys: Data on accident-involved cars/drivers are analysed in order to quantify the chance of driver injury and to assess certain risk factors like car make and model. As the cars/drivers involved in the same accident form a "cluster", where the size of the cluster equals the number of accident-involved parties, traffic accident survey data are typical multi-level data with accidents as first-level or primary and cars/drivers as secondlevel or secondary units (car occupants in general are to be considered as third level units). Consequently, appropriate statistical multi-level models are to be used for driver injury risk estimation purposes as these models properly account for the cluster structure of traffic accident survey data. In recent years various types of regression models for clustered data have been developed in the statistical sciences. This paper presents multi-level statistical models, which are generally applicable for vehicle crashworthiness assessment in the sense that data on single and multiple car crashes can be analysed simultaneously. As a special case of multi-level modelling driver injury risk estimation based on paired-by-collision car/driver data is considered. It is demonstrated that assessment results may be seriously biased, if the cluster structure inherent in traffic accident survey data is erroneously ignored in the data analysis stage.
Crash involvement studies using routine accident and exposure data : a case for case-control designs
(2009)
Fortunately, accident involvement is a rare event: the chance of an individual road user trip to end up in a crash is close to zero. Thus, according to general epidemiological principles one can expect the case-control study design to be especially suitable for quantifying the relative risk (odds ratio) of accident involvement of road users with a certain risk factor as compared to road users that do not have this characteristic. Ideally, of course, the database for such a case-control study should be established by drawing two independent random samples of cases (accidental units) and controls (nonaccidental units), respectively. If, however, special data collection is not an option, it is nevertheless possible to analyze routine accident and exposure data under a case-control design in order to fully exploit the information contained in already existing databases. As a prerequisite, accident and exposure data from different sources are to be combined in a single file of micro or grouped data in a way consistent with the case-control study design. Among other things, the proposed methodological approach offers the possibility to use in-depth data of the GIDAS type also in investigations of active vehicle safety by combining this data with appropriate vehicle trip data collected in mobility surveys.
The so-called "seat-belt injuries" or "seat-belt syndromes", described as 2-point seat-belt injuries, contain heavy inflection injuries of the lumbal spinal column, combined with heavy abdominal injuries as rupture of the upper intestinal bold or heavy injuries of the upper entrails. With "playing" children in the font of the car, with inappropriate plant of 3-point belts, identical injuries can occur.
Die meisten der in Betracht kommenden Zwischenquerschnitte werden durch die derzeitigen Entwurfsrichtlinien nicht abgedeckt. Hinreichende Erkenntnisse über ihre Leistungsfähigkeit, die bei verschiedenen Belastungen erzielbaren Verkehrsqualitäten und vergleichende Angaben zum Sicherheitsniveau der Zwischenquerschnitte liegen nicht vor. Die Projektgruppe "Zwischenquerschnitte" der Bundesanstalt für Straßenwesen untersucht daher die Vor- und Nachteile der Zwischenquerschnitte mit dem Ziel, Einsatzbereiche für die verschiedenen Ausbildungsformen von Querschnitten zu entwickeln. Der Bericht gibt einen Überblick über bisherige Aktivitäten der Projektgruppe und stellt erste Zwischenergebnisse der Untersuchung vor. Bisherige Messungen zeigen, dass der besondere Vorteil der zwei- und dreiseitigen Zwischenquerschnitte in der Verbesserung der Überholsituation liegt. Für die Beurteilung vierstreifiger Zwischenquerschnitte kann bislang erst die Aussage gemacht werden, dass immer dann, wenn die Verkehrsbelastung tatsächlich einen Querschnitt mit 4 Fahrstreifen erforderlich macht, man die beiden Fahrrichtungen aus Gründen der Verkehrssicherheit baulich trennen sollte.
This study analyses no.39 cases in which n.41 motorcyclists were fatally injured, or 36% of total motorcycle fatalities in Northern Ireland between 2004 and 2010 (n.114). There were n.17 cases (43.6%) where the actions of another vehicle driver caused the collision, in thirteen of these cases the motorcycles had their lights switched on. The remaining n.22 collisions (56.4%) were due to the actions of the motorcyclist. In the approach to the collision scene, there were n.13 cases (31.7%) in which the approach was a right hand bend and in n.8 (19.5%) cases, the approach was a left hand bend. In the remaining n.18 (43.9%) cases, the approach was a straight road. Of the n.17 (41.4%) motorcycles that slid after falling, n.10 (24.4%) fell onto their right side and the remaining n.7 (17.1%) fell onto their left side. The information from this study identifies primary and contributory causes of motorcycle collisions.
The changed focus in vehicle safety technology from secondary to primary safety systems need to evolve new methods to investigate accidents, high critical, critical and normal driving situations. Current Naturalistic Driving Studies mostly use vehicles that are highly equipped with additional measuring devices, video cameras, recording technology, and sensors. These equipped fleets are very expensive regarding the setup and administration of the study. Due to the great rarity of crashes it is additionally necessary to have a high distribution and a homogeneous distribution of subject groups. At the end all these facts are leading to a very expensive study with a manageable number of data. Smartphones are becoming more and more popular not only for younger people. Contrary to traditional mobile phones they are mostly equipped with sensors for acceleration and yaw rates, GPS modules as well as cameras in high definition resolution. Additionally they have high-performance processors that enable the execution of CPU-intensive tools directly on the phone. The wide distribution of these smartphones enables researchers to get high numbers of users for such studies. The paper shows and demonstrates a software app for smartphones that is able to record different driving situations up to crashes. Therefore all relevant parameter from the sensors, camera and GPS device are saved for a given duration if the event was triggered. The complete configuration is independently adjustable to the relevant driver and all events were sent automatically to the research institute for a further process. Direct after the event, interviews with the driver can be done and important data regarding the event itself are documented. The presentation shows the methodology and gives a demonstration of the working progress as well as first results and examples of the current study. In the discussion the advantages of this method will be discussed and compared with the disadvantages. The paper shows an alternative method to investigate real accident and incident data. This method is thereby highly cost efficient and comparable with existing methods for benefit estimation.
The number of injured car occupants decreases constantly. Nevertheless, they account for nearly 50% of all fatalities and about 44% of all seriously injured persons in German traffic accidents. Further reductions of casualties require multiple efforts in all parts of traffic safety. In this paper a detailed analysis of the important pre-hospital rescue phase was done. The basis for future improvements is the knowledge about injury causation of car occupants in combination with other corresponding influence factors. For that reason more than 1.200 severe (AIS3+) injuries of frontal car occupants were analyzed. For the most relevant injuries of car occupants multivariate analysis models were created to predict the probability of these injuries in a real crash scenario. In addition to the collision severity different influence factors like impact direction, seat belt usage, age of the occupant, and gender were analyzed. Furthermore, the models were checked regarding the goodness of fit and all results all results were checked concerning their robustness. The prediction models were created on the basis of 5.000 car accidents. Afterwards, the models were validated using 4.000 different car accidents. The prediction of the probability of severe injuries could be used for different applications in the field of traffic safety. One possibility is the implementation of the models in a tool for the on-the-spot diagnosis. The background for the development of such applications is the fact, that there are only limited diagnostic possibilities available at the accident scene. Nevertheless, the rescue forces have to make essential decisions like the alerting of the necessary medical experts, appropriate treatment, the type of transportation and the choice of an adequate hospital. These decisions quite often decide between life and death or influence the long-term effects of injured persons. At this point, indications of expectable injuries could help enormously. To enable even persons with limited technical knowledge to use the tool, a procedure was developed that facilitates the assumption of the given crash severity. Another important possibility for the application of the prediction models is the use for the qualification of information sent by e-call systems.
Over the last decades the number of traffic accident fatalities on German roads decreased by 77% down to 4968 in the year 2007. This positive development is due to optimisations of vehicle safety, roads and infrastructure and medical rescue issues. Up to now mostly the optimisations of secondary safety measures lead to this effect on vehicle safety. Since some years more and more driver assistance systems are available and lead to a further reduction of all accidents. These new systems are often comfort systems and have not primarily been developed to increase vehicle safety. In contrast to secondary safety systems primary safety systems are able to mitigate and avoid accidents. So in the future it is important to estimate the benefit of these systems in reducing accident numbers as well. Current benefit estimation methods mostly focus on a single system only and not on the combination of systems. In this paper a new method for a multivariate benefit estimation based on real accident data is developed. The paper describes the basic method to estimate the benefit of primary and secondary safety systems in combination. With the presented method the benefit will not be overestimated as it would be by a simple addition of the benefits of single systems. The model will be validated by a multivariate prospective benefit estimation of different vehicle safety systems in comparison to single benefit estimations of the same systems. For this the German In-Depth Accident Database is used. The results show the importance to implement the interactions of safety systems in the estimation process and rate the overestimation by a simple addition of the single system benefits. The validation includes primary and secondary safety systems in combination. The validation is done using more than 3500 real accidents which were initiated by cars. This sample out of the GIDAS database is representative for the current accident situation in Germany. The paper shows the necessity of a multivariate estimation of the benefit for existing and future safety systems.
In the last years various new driver information and driver assistance systems made their way into modern vehicles and there are yet countless systems underway. However, expenses for both, the development and the construction of these systems are tremendous. Therefore the interest of evaluating systems keeps growing steadily, not only regarding the results of systems developed in the last years but also regarding system ideas. Only if at least a rough benefit estimation is given, the industry can decide which development should be supported. However, there is still a lack of transparency of possible and useful methods for these kinds of estimations. These were analyses and structured in this study.
The accident research project in Dresden was founded in July 1999. To date over 6.000 crash investigations have been undertaken. About 10.000 vehicles have been documented and over 13.000 participants have been debriefed. But there is much more than this scientific success. Because of the interdisciplinary character between the medical and technical focus, the project affords an important contribution for the education of the involved students. Over 200 students of different fields of study have got experiences not only for the occupational career. This lecture describes the additional effects of the accident research project regarding the education of the students, the capacity for teamwork and learning about dealing with accident casualties.
Because of actual developments and the continuous increase in the field of drive assistant systems, representative and detailed investigations of accident databases are necessary. This lecture describes the possibility to estimate the potential of primary and secondary safety measures by means of a computerized case by case analysis. Single primary or secondary safety measures as well as a combination of both are presented. The method is exemplarily shown for the primary safety measure "Brake Assist" in pedestrian accidents. Regarding accident prevention only the primary safety measure is determined.
Bei Schrägseilbrücken und Hängebrücken ist die Tragfähigkeit und die Betriebsfestigkeit der Seile von entscheidender Bedeutung. Da in Deutschland seit einigen Jahren wieder verstärkt Schrägseilbrücken gebaut werden, kommt den neueren Entwicklungen auf diesem Gebiet eine besondere Bedeutung zu. Diese neuen Entwicklungen werden im Bericht beschrieben. An erster Stelle steht dabei die Anwendung von Litzenbündeln (LBS) in Deutschland bei der fertiggestellten Ziegelgrabenbrücke im Brückenzug der Rügenbrücke und der im Bau befindlichen Niederrheinbrücke Wesel. Diese im Ausland schon seit vielen Jahrzehnten angewendete Bauart stieß in Deutschland bisher auf Bedenken, insbesondere wegen der Prüfbarkeit und des Korrosionsschutzes. Litzenbündel bestehen im Wesentlichen aus 7-drähtigen Spannstahllitzen und speziellen Verankerungsteilen. Auf der freien Länge des Seils sind die Litzen durch ein HDPE-Rohr gegen äussere Beschädigungen und Umwelteinflüsse geschützt. Da Seile aus Litzenbuendeln bisher nicht bauaufsichtlich geregelt sind, war eine Zustimmung im Einzelfall erforderlich. Die Prüfung der Seile bei den regelmäßig durchzuführenden Bauwerksprüfungen ist verbunden mit einem großen technischen Aufwand, hohen Kosten und Beeinträchtigungen des Verkehrs. Der Bericht geht ausführlich auf mögliche Methoden der Seilprüfung ein. Bei der Ziegelgrabenbrücke wurde die magnetinduktive Prüfung, die sich bei vollverschlossenen Seilen seit vielen Jahren bewährt hat, zum Feststellen von Schäden an den Seilen aus Litzenbündeln angewendet. Neue Entwicklungen bei vollverschlossenen Seilen betreffen insbesondere die Korrosionschutzsysteme und die Ausführung der Ankerköpfe. In beiden Bereichen beschreibt der Bericht die Neuerungen. Bei den Instandsetzungen der vollverschlossenen Seile werden angespochen: dauerhafte Seilspreizung zur Verbesserung der Zugänglichkeit bei der visuellen Prüfung, Seilaustausch am Beispiel der Rheinbrücke Düsseldorf-Flehe und die Instandsetzung des Korrosionschutzes mit verschiedenen Methoden. Wegen der neueren technischen Entwicklungen entsprechen die derzeit gültigen einschlägigen Regelwerke teilweise nicht mehr dem Stand der Technik. Sie müssen daher überarbeitet oder gänzlich neu erstellt werden.
Accident simulation and reconstruction for enhancing pedestrian safety: issues and challenges
(2015)
The enhancement of pedestrian safety represents a major challenge in traffic accidents. This study allows a better understanding of the issues in pedestrian protection. It highlights the potential of in-depth studies in identifying relevant crash parameters interfering in the pedestrian safety. A computational simulation tool was developed to reconstruct pedestrian real-world crashes. A sample of 100 in-depth accident cases was reconstructed from two sources: 40 crashes provided by IFSTTAR-LMA and 60 crashes from CASR. To exemplify the methodology, two accident cases from each database were illustrated. A description of the sample of crashes was presented including the travel and impact speed of the vehicle, the driver reaction, the pedestrian walking speed, the scene configuration with the eventual obstacles, etc. This detailed description is pointing to the major factors affecting the limits of pedestrian safety systems.
Zur Ergänzung der bestehenden Routineverfahren in der forensischen Blutalkoholanalytik wurde ein massenspektrometrisches Verfahren mit d6-Ethanol als internem Standard entwickelt. Ziel war die Anwendung eines beweissicheren Bestimmungsverfahrens, bei dem Ethanol über die Retentionszeit und Substanzeigenschaften identifiziert wird. Die Pilotstudie belegt, dass die forensische Blutalkoholbestimmung durch Anwendung eines gaschromatographischen und massenspektrometrischen Verfahrens mit Dampfraumanalyse routinemäßig möglich ist. Im Gegensatz zum GC- und ADH-Verfahren ist die massenspektrometrische Blutalkoholbestimmung beweissicher. Die Autoren empfehlen die Aufnahme in die Richtlinien zur Bestimmung der Blutalkoholkonzentration für forensische Zwecke. Die Arbeit wurde vom Bund gegen Alkohol und Drogen im Straßenverkehr e.V. (B.A.D.S.) unterstützt.
Cycling supports the independence and health of the aging population. However, elderly cyclists have an increased injury risk. The majority of injured cyclists is victim of a single-sided accident, an accident in which there is no other party involved. The aim of the project "Safe and Aware on the bicycle" is to develop guidelines for an advisory system that is useful in preventing single-sided accidents. This system is able to support the elderly cyclist; enabling the cyclist to timely adapt his cycling behaviour and improve cycling safety and comfort. For the development of such advisory system the causes of singles accidents and the wishes of the elderly cyclist must be known. First step to obtain this insight was a literature survey and an GIDAS research. Unfortunately accidentology research with GIDAS did not give the full understanding of the pre-crash situations and (especially the behaviour related) factors leading to the accident. The second step was consultation of elderly cyclist through a questionnaire (n=800), in-depth interviews (n=12) and focus group sessions (n=15). This offered complementary information and a much better understanding of the behavioural aspects. Results concern the behaviour in traffic and identify specific physical (i.e. problems looking backwards over the shoulder) and mental issues. Furthermore, the needs and wishes for support in specific cycling situations were identified. In conclusion; The GIDAS results together with the information obtained contacting the elderly cyclists enabled setting up requirements for an advisory system, which is useful in preventing single-sided accidents.
Novice drivers are at high risk for crash involvement. We performed an analysis of causations, injury patterns and distributions of novice drivers in cars and on motorcycles in road traffic as a basis for proper measurements. Method Data of accident and hospital records of novice drivers (licence < 2 years) were analysed focusing the following parameters: injury type, localisation and mechanism, Abbreviated Injury Scale (AIS), maximum AIS (MAIS), delta-v, collision speed and other technical parameters and have been compared to those of experienced drivers. In 18352 accidents in the area of Hannover (years1985"2004), 2602 novice drivers and 18214 experienced drivers were recorded having an accident. Novice car drivers were more often and severe injured than experienced and on motorcycles the experienced riders were at higher risk. Novice drivers of both groups sustained more often extremity injuries. 4.5 % novice car drivers were not restraint compared to 3.7 % of the experienced drivers and 6.1 % novice motorcycle drivers did not wear a proper helmet (versus 6.5 %). Severe injuries sustained at a rate of 20 % at collision speeds below 30 km/h and in 80% at collision speeds above 50 km/h. Novice car drivers drove significant older cars. The risk profile of novice drivers is similar to those of drivers older than 65 years. Structural protection and special lectures like skidding courses could be proper remedial action next to harder punishment of violations.
Description of road traffic related knee injuries in published investigations is very heterogeneous. The purpose of this study was to estimate the risk of knee injuries in real world car impacts in Germany focusing vulnerable road users (pedestrians, bicyclists and motorcyclists) and restrained car drivers. The accident research unit analyses technical and medical data collected shortly after the accident at scene. Two different periods (years 1985-1993 and 1995-2003) were compared focusing on knee injuries (Abbreviated Injury Scale (AISKnee) 2/3). In order to determine the influences type of collision, direction and speed as well as the injury pattern and different injury scores (AIS, MAIS, ISS) were examined. 1.794 pedestrians, 742 motorcyclists, 2.728 bicyclists and 1.116 car drivers were extracted. 2% had serious ligamentous or bony injuries in relation to all injured. The risk of injury is higher for twowheelers than for pedestrians, but knee injury severity is higher for the latter group. Overall the current knee injury risk is low and significant reduced comparing both time periods (27%, p<0,0001). Severe injuries (AISKnee 2/3) were below 1%). Improved aerodynamic design of car fronts reduced the risk for severe knee injuries significantly (p=0,0015). Highest risk of injury is for motorcycle followed by pedestrians, respectively. Knee protectors could prevent injuries by reducing local forces. The classically described dashboard injury was rarely identified. The overall injury risk for knee injuries in road traffic is lower than estimated and reduced comparing both periods. The aerodynamic shape of current cars compared to older types reduced the incidence and severity of knee injuries. Further modification and optimization of the interior and exterior design could be a proper measurement. Classic described injury mechanisms were rarely identified. It seems that the AIS is still underestimating extremity injuries and their long term results.
Es wird auf Grund einer Befragung untersucht, ob ein signifikanter Unterschied zwischen Fahranfängern, die die Prüfung nach weniger als 21 Fahrstunden, und solchen, die sie nach 21 und mehr Stunden bestanden haben, in Bezug auf Unfallneigung und Unfallhäufigkeit besteht. Es ergab sich, dass die kurz ausgebildeten im ersten Jahr eine Fahrleistung von durchschnittlich 12.362 Kilometer, die langausgebildeten von 7.750 Kilometer aufzuweisen hatten. Pro 1 Million Kilometer hatten die kurzausgebildeten 45,6, die langausgebildeten 73,2 Unfälle. Dem entsprach das Verhältnis von anderen Auffälligkeiten. Bei den Kurzausgebildeten ergaben sich keine Hinweise auf Defizite. Der Nutzen einer personenunabhängigen Mindestzahl von Fahrstunden ist zweifelhaft. Fahrschüler, die eine verhältnismäßig große Zahl von Fahrstunden benötigen, stellen die eigentliche Problemgruppe dar. Fahrschüler, die in der Fahrschule schnell lernen und bei der Prüfung erfolgreich sind, haben vergleichsweise gute Fahranfängerchancen.
Nachhaltigkeit im Brückenbau
(2011)
Nachhaltigkeit und Energieeffizienz sind wichtige baupolitische Ziele. Der Bund als Bauherr ist sich seiner Vorbildfunktion bewusst: Baumaßnahmen sollen sowohl ökologisch verträglich als auch ökonomisch akzeptabel und sozio-kulturell angemessen sein. Alle drei Bereiche betreffen auch die Straßeninfrastrukturen in unterschiedlich ausgeprägter Weise. Aus Sicht des Bauherrn geht es um die Sicherstellung der Mobilität durch ein umweltverträgliches, wirtschaftliches und qualitativ hochwertiges Straßennetz. Für die Baupraxis stellt sich die Aufgabe, in ganzheitlicher Hinsicht optimierte Lösungen bereitzustellen. Brückenbauwerke haben eine hohe symbolische Kraft und prägen Städte und Landschaften. Sie sind nicht nur für Ingenieure faszinierend, sondern stellen als bedeutender Bestandteil der Straßeninfrastruktur einen hohen gesellschaftlichen Wert dar. In der heutigen Vergabepraxis werden Entscheidungen über Baumaßnahmen maßgeblich durch die Diskussion über Erstellungs- und einmalige Investitionskosten beeinflusst. Grund dafür sind auch die begrenzten finanziellen Ressourcen; dies führt aber nicht zwangsweise zu nachhaltigen Lösungen. Damit Brückenbauwerke ökonomisch und ökologisch optimiert sowie funktional und sozio-kulturell angemessen erstellt werden können, sind weiterentwickelte Wertungskriterien erforderlich. Hier liegt aber auch eine Chance für die Bauwirtschaft, ihre Kompetenz auf dem Gebiet des Bauwesens auszuschöpfen und qualitätsvolles und kostengünstiges Bauen im Lebenszyklus zu verbinden. Neue Instrumente und Methoden sind gefragt, die derzeit auf Initiative des BMVBS entwickelt werden. Vor diesem Hintergrund befasst sich eine Arbeitsgruppe der Bundesanstalt für Straßenwesen unter Beteiligung von Experten aus Forschung und Baupraxis mit der Entwicklung und Bereitstellung von Verfahren der Nachhaltigkeitsbewertung für Bauwerke der Straßeninfrastruktur. Ganzheitliche Wertungskriterien werden derzeit in Pilotstudien getestet.
The Federal Highway Network of Germany represents considerable fixed assets. Construction and maintenance activities not only require a high budget, but also influence the traffic infrastructure and, thus, the economy and society as a whole. The present safety of the network has to be ensured under consideration of environmental aspects. At the same time the network owner has to make sure that the civil works are carried out in the most efficient way. Considering the fact that financial resources are restricted, the costs have to be spent in a way to obtain the greatest possible benefit. This task is supported by the application of a comprehensive Asset Management, which is subdivided into operational and controlling tasks respectively. The paper describes the current management procedures.
In future, additional and more detailed data are needed about the current conditions of bridges for preventive maintenance management. Monitoring procedures are not merely able to provide key performance indicators for a specific point in time, but also over a period. These KPIs must be selected in such a way as to permit substantiated statements about the present and future condition of bridges. For this reason, greater efforts must be made to define the significant KPIs for the various types of bridges, and show how these figures can be reliably determined. Both the COST Action TU1402, and TU1406 offer important approaches which, properly combined, can deliver substantial added value to the calculation and description of the condition of bridges in the interest of proactive maintenance management.
Germany's road infrastructure grew over centuries to become the arteries and lifelines of our society. The present safety of the infrastructure has to be ensured under consideration of environmental aspects. At the same time the owner has to make sure that the maintenance activities are carried out in the most efficient way. Considering the fact that financial resources are restricted, maintenance costs have to be spent in a way to obtain the greatest possible benefit. In the case of bridges, which are one of the most important parts of the road infrastructure in Germany, this task is supported by the application of a bridge management system (BMS). The existing German BMS contains assessment and optimization procedures on object and network level and is the basis for advancements to meet future demands. Developments concern life cycle and quality-oriented, holistically optimized procedures. Reasonable infrastructure management will contribute to meeting efficiency and sustainability objectives and to achieving interoperability. Here holistic network infrastructure management methods are required. There is a strong need for management solutions during the whole service life of a structure. The definition of criteria for evaluation of the relevance of failure mechanisms, including acceptance thresholds, requires the availability of relevant data for management procedure. Tools for innovative investigation methods and an effective data management will help in meeting the requirements. Relevant fields of research are improved maintenance strategies to meet future demands concerning heavy goods traffic, application and further development of nondestructive testing methods for efficient and sustainable management structures, and the improvement of analytic management tools to meet future demands.
Allein im Netz der Bundesfernstraßen sind etwa 35.000 Brücken mit einer Fläche von 25 Millionen Quadratmetern enthalten. Ihr Wiederbeschaffungswert beträgt etwa 70 Milliarden DM. Es wird über die notwendigen Aktivitäten zur Erhaltung dieser für die Aufrechterhaltung des auf den Bundesfernstraßen rollenden Verkehrs besonders wichtigen Bauwerke berichtet. Aufgrund des weiter stärker werdenden Verkehrs, der zunehmenden Fahrzeuggewichte sowie der wachsenden Anzahl von Schwertransporten unterliegen insbesondere die älteren Bauwerke größerer Beanspruchung, als man bei ihrer Planung in Rechnung stellen musste. Hinzu kommt die natürliche Alterung aus sonstigen äußeren Einflüssen wie Temperatur, Witterung und erhöhter Umweltbelastung. Die Verwendung von Auftausalzen führt insbesondere bei älteren Brückenüberbauten zu Korrosionsschäden an der Bewehrung des Betons. Durch die Entwicklung eines Bauwerks-Management-Systems (BMS) wird die Verbesserung der Erhaltung von Brücken und sonstigen Ingenieurbauten angestrebt. Der Aufbau und die Wirkungsweise des BMS werden dargelegt. Des Weiteren werden die schon seit langem eingeführten Prüfvorschriften für Bauwerke im Zuge von Straßen und Wegen (DIN 1076) sowie gängige Prüfverfahren beschrieben.
Brückenmanagement
(2001)
Die systematische Erhaltung der Brücken im Zuge der Bundesfernstraßen ist eine wichtige Aufgabe für den Baulastträger Bund und die Straßenbauverwaltungen der Länder. Um künftig Erhaltungsprogramme auf einer einheitlichen Grundlage unter Berücksichtigung gesamtwirtschaftlicher Grundsätze aufstellen zu können, wird durch die Bundesanstalt für Straßenwesen derzeit im Auftrag des Bundesministeriums für Verkehr, Bau- und Wohnungswesen ein umfassendes Bauwerks-Management-System (BMS) konzipiert und realisiert. Das geplante BMS beinhaltet alle Funktionen zur Durchführung des Erhaltungsmanagements. Grundlage ist die Erhebung und Bereitstellung von objektbezogenen Informationen. In Verbindung mit netzbezogenen Daten, Rahmenbedingungen und Restriktionen wird damit die Basis für Analyseprozesse, zum Beispiel Wirtschaftlichkeitsuntersuchungen, Priorisierungen und Bedarfsermittlungen bereitgestellt. Als Ergebnis werden Maßnahmenvorschläge, optimierte Programmplanungen und Angaben zum Finanzbedarf entwickelt. Verfahren und Programmsysteme werden schrittweise ab 2002 bis 2005 den Straßenbauverwaltungen zur Verfügung gestellt.
BMS-Entwicklungen
(2002)
BMS-Entwicklungen
(2003)
Im von der DG Home (CIPS Program) geförderten Projekt "SecMan " Security Manual for Road Infrastructures" wurde ein vierstufiges Verfahren zur Identifikation kritischer Straßeninfrastrukturen, ihre Bewertung hinsichtlich diverser von Menschen verursachter Gefahren sowie die Bestimmung effektiver Schutzmaßnahmen entwickelt. Diese Ergebnisse wurden in einem ganzheitlichen "best-practice" Handbuch zusammen getragen, welches einen trans-nationalen Sicherheitsmanagement-Ansatz für Betreiber und Eigentümer von Straßeninfrastrukturen in Europa ermöglicht. Im Folgenden wird die entwickelte Methodik vorgestellt, ausgehend von der Bewertung der Netzkritikalität über die Attraktivität und Vulnerabilität eines Bauwerks hin zu einer Bewertungsmethodik für die Auswahl geeigneter Schutzmaßnahmen.
The European CASPER (Child Advanced Safety Project for European Roads) project studying car child safety includes a sociological approach in order to have a better understanding of the behaviour of parents driving children under 12 years old. A questionnaire was distributed via the internet in Europe with 998 parents (representing 1638 children) from 22 European countries responding. The results inform on the way parents secure their children during a car trip. Many parents did not control how their children were installed in the child restraint system (CRS). A toddler was more likely to travel into a child seat than an older child was. Regarding misuse situations, an important part of the participants did not think that they could make mistakes when fixing the child seat to the car (26%) or when placing the child into the seat (39%). This leaves an important field of action especially by communication via different media and in the CRS sale outlets.
Rollover scenarios in Europe
(2005)
Rollover accidents seem to be a rising problem in Europe and therefore the systematic of this accident scenario should be investigated. Based on statistical investigations on major European accident databases for different countries a series of 73 real world rollover accidents was analysed. These cases were reconstructed using PC-Crash and preliminary categorised using a modified USbased rollover classification. In a first step, the rollover events were reconstructed from the point of conflict to the vehicle- rest position. The vehicles kinematics as well as its linear and rotational velocities were derived. In a second step typical velocity characteristics as well as kinematics were identified and the events categorised according to these criteria. Based on these results four main categories were defined, covering all reconstructed accidents. This categorisation was based on mechanical parameters (rotatory and translator kinematical data of the vehicle). Significant differences can be seen for different scenarios for the "first phase of rollover".
Interdisciplinary accident research and research projects of AARU Audi Accident Research Unit
(2017)
AARU (Audi Accident Research Unit) is an interdisciplinary research project of the University Hospital Regensburg in cooperation with AUDI AG. Specific objective is to comprehend the respective accident scenario and retrieve generally applicable findings as to technical, medical and psychological processes. In order to prevent traffic accidents and to alleviate vehicle accident consequences, postulates of general traffic safety, human-machine interaction, technical design and function of new vehicles and occupant as well as third party protection shall be inferred from these findings. Specifically, each accident with new Audi, Lamborghini and Ducati vehicles involved is analyzed interdisciplinary, discussed in a case meeting and anonymously documented with more than 2,000 parameters. The database is continually used for solving safety relevant issues. Parallel to accident analysis, research projects are performed in the fields medicine, psychology and engineering in order to gain comprehensive insight and identify potential additional areas of activity of accident research.
Die hier berichtete Auswertung der Leistungen in den Tests zur Messung kognitiv-psychomotorischer Fähigkeiten haben durchgehend erbracht, dass die neuroleptisch behandelten Patienten unter Stress und Zeitdruck in ihrem Leistungsumfang gegenüber Gesunden beeinträchtigt sind. Sie haben allerdings eine ausgeprägte Tendenz Fehler zu vermeiden, was sich - relativ gesehen - günstig auf die Qualität der Leistung auswirkt. Es bleibt derzeit offen, ob die Patienten ihre eigenen Leistungseinbußen in Teilbereichen durchaus empfinden und daraus kompensatorisch risikovermeidend reagieren. Wieweit die von den Patienten erbrachten Leistungen ausreichen, die Fahrtüchtigkeit daraus abzuleiten, kann hier generell nicht beurteilt werden. Es ist notwendig, Normwerte eines gerade noch zulässigen Mindestmaßes an psychomotorischer Funktionstüchtigkeit zu erarbeiten. Die weitere Auswertung der Befindlichkeitsbeurteilungen sowie der habituellen Persönlichkeitsmerkmale - als intervenierende Variable - wird möglicherweise mehr Licht in die Interpretation bringen.
The data situation for quantifying the proportion of accidents avoided by the introduction of active safety systems is incomplete, since there is generally no data available on the accidents avoided by the technology in question. In this paper, a split-register approach is suggested and compared with the classical case-control approach known from epidemiologic applications. Provided a set of assumptions hold, which can reasonably be made in such data situations, the split register approach allows inferences on the population accident risk. For both approaches the benefits of basing the analysis on the results of a logistic regression to adjust for confounding factors are outlined. The biasing effects of violating key assumptions are discussed and the split-register approach is demonstrated using the example of the active safety system ESP with data from the German in-depth accident study GIDAS.
This study that was funded by the Research Association for Automotive Technology (FAT) develops a method for the evaluation of the placement of tanks or batteries by using the deformation frequencies in real-world accidents. Therefore, the deformations of more than 20.000 passenger cars in the GIDAS database are analysed. For each vehicle a contour of deformation is calculated and the deformed areas of the vehicles are transferred in a rangy matrix of deformation. Thereby, the vehicle is divided into more than 190.000 cells. Afterwards, all single matrices of deformation are summarized for each cell which allows representative analyses of the deformation frequencies of accidents with passenger cars in Germany. On the basis of these deformation frequencies it is possible to determine least deformed areas of all passenger cars. Furthermore, intended placements of tanks or batteries can be estimated in an early stage of development. Therefore, all vehicles with deformations in the intended tank areas can be analysed individually. Considering numerous parameters out of the GIDAS database (e.g. collision speed, kind of accident, overlap, collision partner etc.) the occurring forces can be calculated or the deformation frequency can be estimated. Furthermore, it is possible to consider the influence of primary and secondary safety systems on the deformation behaviour. The analysis of "worst case accident events" is an additional application of the calculated matrix of deformation frequency.
Im Mittelpunkt der Überlegungen zu Perspektiven einer zeitgemäßen und sicherheitswirksamen Fahranfängervorbereitung steht die Absenkung des weiterhin hohen Anfangsrisikos bei Fahranfängern. Ausgehend von den positiven Erfahrungen mit dem Begleiteten Fahren ab 17 beauftragte das Bundesministerium für Verkehr, Bau und Stadtentwicklung (BMVBS) die Bundesanstalt für Straßenwesen (BASt) mit der Erarbeitung eines Rahmenkonzepts, in dem Entwicklungsperspektiven für weitere Verbesserungen der Vorbereitung von Fahranfängern und wissenschaftlich begründete Maßnahmenvorschläge für die Erhöhung der Fahranfängersicherheit formuliert werden. Zunächst werden die Aufgaben und die Vorgehensweise der Rahmenkonzepterarbeitung sowie die Kriterien für die Ableitung von Maßnahmenprioritäten skizziert. Ausgehend von den Erkenntnissen zur Entwicklung des Unfallrisikos im Verlauf der Fahrkarriere werden im Anschluss die maßgeblichen Ansatzpunkte zur verbesserten Gestaltung eines sicheren Übergangs in die Automobilität aufgezeigt. Zentrale Maßnahmenvorschläge des Rahmenkonzepts werden vorgestellt. Diese beziehen sich auf die Bekämpfung der maßgeblichen Ursachen des erhöhten Fahranfängerrisikos (Fahrerfahrungsdefizit und Einstellungsmängel), die Optimierung bestehender Fahranfängermaßnahmen und die verstärkte Erschließung von Technik und Wissenschaft für das Fahren lernen.
Seit einigen Jahren steht mit dem pupillographischen Schläfrigkeitstest (PST) ein objektives Messverfahren zur Ermittlung der Tagesschläfrigkeit zur Verfügung, wobei die Zunahme der spontanen Schwankungen des Pupillendurchmessers unter Müdigkeit registriert wird. Es wurde eingesetzt bei verschiedenen Probandengruppen, die einem potenziell erhöhten Risiko von Vigilanzminderungen ausgesetzt sind: chronische Schmerzpatienten (n = 20) beziehungsweise substituierte Heroinabhängige (n = 52) unter Opioiden, ambulante Patienten unter Psychopharmaka (n = 32), Allergiker unter Antihistaminika (n = 40) und medizinisches Nachtdienst-Pflegepersonal (n = 40). Verglichen wurde unter anderem mit zwei Kontrollgruppen (n = 21, n = 10). Bei den Untersuchungen ergaben sich relativ normale Schläfrigkeitswerte bei ambulanten Psychopharmaka-Patienten und Allergikern. Teils exzessiv erhöhte Werte wurden dagegen insbesondere bei substituierten Heroinabhängigen (81 Prozent), opiatversorgten Schmerzpatienten (59 Prozent) und dem Nachtdienstpersonal (70 Prozent) festgestellt.
At IAM RoadSmart we share the excitement about autonomous cars " who wouldn't! However over half of the drivers we polled supported concentrating on making drivers safer " among IAM RoadSmart members it was 70%. Driverless cars are still years away but delivering safer drivers can help reduce death and injury from tomorrow. Governments, academics and car makers need to work hard to convince sceptical British and American drivers that autonomous cars can deliver the benefits promised such as a 90% plus reduction in road deaths.
The Swedish "Vision Zero" regards road fatalities and severe injuries as unacceptable. The vision is based on this ethical perspective together with a fundament of shared responsibility between the system designers and the road user. The design of the traffic system shall protect the road user from these effects as long as he or she follows the traffic rules. It should be possible to make a mistake without being killed. This policy has, during the first period of the "vision zero" (since 1997) put high priority on road and car design where the purpose has been to develop a forgiving environment. Gradually it has, however, become clear that much more effort has to be focused on the responsibility of the road user. Protecting measures will have limited effect as long as the understanding and acceptance from road users is limited. During the last years, Sweden has gone through several improvements of the driver education and is in the middle of important improvements of road safety education for children in schools. Several EU-projects has contributed to this development. One aspect that has received large international interest is the lay instructed driver training from 16 years of age supervised by parents. This has been in use since 1993. Another is the development of mandatory courses, such as an introduction for the learner and the lay instructor, a "risk awareness" courses dealing specifically with speeding, seat belt use, drunk driving, tiredness, and driving on low friction. The presentation will share some of the "vision zero" fundaments together with the latest experiences, research and development concerning driver education in Sweden.
An der Fortbildungsakademie der Ärztekammer Nordrhein werden in einem 16-Stunden-Kurs Qualifizierungen zum Fachgutachter/zur Fachgutachterin für verkehrsmedizinische Begutachtung in Kooperation mit unterschiedlichen Fachreferenten aus den verschiedenen klinischen Bereichen durchgeführt. Leistungskontrollen zum Kursinhalt, ein intensives Arbeiten an Fallbeispielen oder gar eine fachliche Begleitung der ersten Gutachten sind nicht generell vorgegeben, wenngleich in Evaluationen zum Kurs insbesondere eine fallorientierte Ausbildung und eine Supervision zumindest in ersten eigenen Begutachtungen von den Teilnehmern/Teilnehmerinnen gewünscht werden. Auf der Grundlage der Erfahrungen der Autoren mit der Leitung/Moderation der entsprechenden Fachfortbildungen der Ärztekammer Nordrhein wurden das bestehende Curriculum kritisch diskutiert und Anregungen zur Umstrukturierung erarbeitet, die im Einzelnen vorgestellt werden. Dabei handelt es sich um ein Konzept auf der Basis des "blended learning": Via Internet wird vertiefendes Lehrmaterial für die verschiedenen Fachbereiche der medizinischen Begutachtung unter verkehrsmedizinischen Fragestellungen zur Bearbeitung angeboten. Die Bearbeitung selbst kann online kontrolliert und bei Bedarf auch mit Lerninhaltsüberpruefungen verknüpft werden. Zusätzlich können Fallbeispiele anonymisiert vorgelegt und mit tatsächlich ausgesprochenen Begutachtungen bereitgestellt werden. Weiterhin wird eine qualifizierte Begleitung zumindest zu Beginn der Gutachtertätigkeit angeregt.
Structured road markings are becoming popular as edge line on high speed roads, ensuring night time visibility (retroreflection) during rain. These markings are often also "audio-tactile": vehicles (un)intentionally driving over it may produce much more tyre/road sound, which may be observed in the vehicle but also in the vicinity. The sound increase inside the car can be considered as a positive side effect, as it alarms the driver and may be very helpful for the prevention of "doze off" traffic accidents. The sound increase perceived outside the car however, may have a positive aspect as it can warn people on the emergency lane about the approaching vehicle, but it may as well annoy people living around. A method for the assessment of the acoustic properties of audio-tactile markings has been developed. It is mainly based on the "Close Proximity" (CPX) method, an ISO method intended for the acoustic assessment of pavements. The results of measurement campaigns with CPX trailers in Belgium and Germany according to a specially designed procedure are presented. The feasibility of the method is discussed. The research has been carried out in the frame of the standardization activities of the CEN working group CEN/TC226/WG2 "Horizontal signalization".
India is one of the leading countries reporting highest road accidents & related injuries. TMARG (Tata Motors Accident Research Group) has been recording crashes in association with M/s. Lokamanya Medical Foundation since 2011 with M/s, Amandeep Hospitals since Aug 2013. This study has highlighted some accident types not discussed extensively in literature. Trucks to Truck impacts " Cabin interaction with overhanging loadbody structures and Offset underside impacts for passenger vehicles are seen in significant numbers. The paper discusses these in more detail including severity.
The development of tyre- and truck-manufacturers leads to the direction to introduce wide base single tyres (size 495/45R22,5) instead of twin tyres on the driving axle of trucks, tractors and busses. To study the driving behaviour and safety of various trucks and units with different tyre combinations and loading conditions was the aim of the study. A computer-aided simulation was used for this investigation. Drive tests with a 40 t unit with prototype single tyres on the drive axle were carried out to verify the simulation. Alterations in driving behaviour and driving safety are mainly dependent on the tyre cornering stiffness. The prototype wide single tyres had a higher lateral stiffness which leads to a higher degree of under-steering (safer driving behaviour). The altered spring base on the drive axle had no influence on the side- tilt stability of vehicle combinations but the solo truck profited from the higher rear axle roll stiffness (less danger for roll-over accidents). As far as the driving safety is concerned nothing speaks against wide base tyres on the drive axle. The simulation of a tyre defect in a bend (assuming 40% of the max. transferable side force for the flat tyre) showed no increased danger using wide single tyres. Later driving tests showed however the need of tyre run flat possibilities to avoid jack-knifing of road trains. Also tyre pressure monitoring systems and electronic stability programs for the trucks are advised.
In the framework of the OECD study "Moving Freight with Better Trucks", several vehicle combinations which are worldwide in operation were examined regarding different performance criteria. One criterion was the road wear performance of these articulated vehicles. With given tyre and vehicle data (mainly weights and axle loads) the road wear performance was calculated for each vehicle combination. The method according to COST 334 is presented and the vehicle combinations are compared
The Swedish National Road Administration (SNRA), the Japanese Automobile Research Institute (JARI) and the Federal Highway Research Institute (BASt) are co-operating in the International Harmonized Research Activities on Intelligent Transportation Systems (IHRA-ITS). Under this umbrella a joint study was conducted. The overall objective of this study was to contribute to the definition and validation of a "battery of tools" which enables a prediction and an assessment of changes in driver workload due to the use of in-vehicle information systems (IVIS) while driving. In this sense \"validation\" means to produce empirical evidence from which it can be concluded that these methods reliably discriminate between IVIS which differ in terms of relevant features of the HMI-design. Additionally these methods should also be sensitive to the task demands imposed on the driver by the traffic situation and their interactions with HMI-design. To achieve these goals experimental validation studies (on-road and in the simulator) were performed in Sweden, Germany and Japan. As a common element these studies focused on the secondary task methodology as an approach to the study of driver workload. In a joint German-Swedish on-road study the Peripheral Detection Task (PDT) was assessed with respect to its sensitivity to the complexity of traffic situations and effects of different types of navigation systems. Results show that the PDT performance of both the German and the Swedish subjects reflects the task demands of the traffic situations better than those of the IVIS. However, alternative explanations are possible which will be examined by further analyses. Results of this study are supplemented by the Japanese study where informational demands induced by various traffic situations were analysed by using a simple arithmetic task as a secondary task. Results of this study show that relatively large task demands can be expected even from simple traffic situations.
Automated driving will provide many kinds of benefits - some direct and some indirect. The benefits originate at the individual level, from changes in the behaviour of drivers and travellers with regard to driving and mobility, ending up with benefits at the social level via changes in the whole transport system and society, where many of the current planning and operations paradigms are likely to be transformed by automated driving. There may also be disbenefits, particularly at a social level, for example in intensity of travel which could result in additional congestion and increased use of natural resources. There may also be unintended consequences. For example, we do not know the impacts on public transport: driverless vehicles could provide a means to a lower cost service provision, but the availability of automated cars could lead to more car travel at the expense of collective transport.
The incidence of side impacts was investigated from GIDAS data. Both vehicle-fixed object and vehicle-vehicle collisions were analysed as these are enclosed within the consumer testing program. Vehicle-fixed object collisions were stratified according to ESC availability. Results indicated that vehicles equipped with ESC rarely have pure-lateral impacts. An increase in oblique collisions was seen for the vehicles with ESC whereby most vehicle were driving in left curves. The analysis of vehicle-vehicle collisions developed injury risk curves were developed at the AIS3+ injury severity for the vehicle-vehicle side impacts. Results suggested that greatest injury risk occurred when a Pre Euro NCAP vehicle was struck by a Post Euro-NCAP vehicle. The remaining curves did not show different behaviour, indicating that stiffness increased have been equally combated. This was attributable to the few Post Euro-NCAP vehicles that had a deployed curtain airbag available in the sample. The integration of Euro NCAP testing has shown to improve vehicle crashworthiness for pole collisions, as those vehicles with ESC rarely incur lateral impacts.
The levels of continuous vehicle automation have become common knowledge. They facilitate overall understanding of the issue. Yet, continuous vehicle automation described therein does not cover "automated driving" as a whole: Functions intervening temporarily in accident-prone situations can obviously not be classified by means of continuous levels. Continuous automation describes the shift in workload from purely human driven vehicles to full automation. Duties of the driver are assigned to the machine as automation levels rise. Emergency braking, e.g., is obviously discontinuous and intensive automation. It cannot be classified under this regime. The resulting absence of visibility of these important functions cannot satisfy " especially in the light of effect they take on traffic safety. Therefore, in order to reach a full picture of vehicle automation, a comprehensive approach is proposed that can map out different characteristics as "Principle of Operation" at top level. On this basis informing and warning functions as well as functions intervening only temporarily in near-accident situations can be described. To reach a complete picture, levels for the discontinuous, temporarily intervening functions are proposed " meant to be the counterpart of the continuous levels already in place. This results in a detailed and independent classification for accident-prone situations. This finally provides for the visibility these important functions deserve.
Accidents between right turning trucks and straight riding cyclists often show massive consequences. Accident severity is much higher than in other accidents. The situation is critical especially due to the fact that, in spite of the six mirrors that are mandatory for ensuring a minimum field of sight for the truck drivers, cyclists in some situations cannot be seen or are not seen by the driver. Either the cyclist is overlooked or is in a blind spot area that results from the turning manoeuvre of the truck and its articulation if it is a truck trailer or truck semitrailer combination. At present driver assistance systems are discussed that can support the driver in the turning situation by giving a warning when cyclists are riding parallel to the truck just before or in the turning manoeuvre. Such systems would generally bear a high potential to avoid accidents of right turning trucks and cyclists no matter if they ride on the road or on a parallel bicycle path. However, performance requirements for such turning assist systems or even test procedures do not exist yet. This paper describes the development of a testing method and requirements for turning assist systems for trucks. The starting point of each development of test procedures is an analysis of accident data. A general study of accident figures determines the size of the problem. In-depth accident data is evaluated case by case in order to find out which are representative critical situations. These findings serve to determine characteristic parameters (e.g. boundary conditions, trajectories of truck and cyclist, speeds during the critical situation, impact points). Based on these parameters and technical feasibility by current sensor and actuator technology, representative test scenarios and pass/fail-criteria are defined. The outcome of the study is an overview of the accident situation between right turning trucks and straight driving cyclists in Germany as well as a corresponding test procedure for driver assistance systems that at this first stage will be informing or warning the driver. This test procedure is meant to be the basis for an international discussion on introducing turning assist systems in vehicle regulations.
In the last years there has been a decline in accident figures in Germany especially for four wheeled vehicles. At the same time, accident figures for motorcycles remained nearly constant. About 17 % of road traffic fatalities in the year 2006 were motorcyclists. 33 % of these riders were killed in single vehicle crashes. This leads to the conclusion that improving driving dynamics and driving stability of powered two wheelers would yield considerable safety gains. However, the well-known measures for cars and trucks with their proven effectiveness cannot be transferred easily to motorcycles. Therefore studies were carried out to examine the safety potential of Anti Lock Braking Systems (ABS) and Vehicle Stability Control (VSC) for motorcycles by means of accident analysis, driving tests and economical as well as technical assessment of the systems. With regard to ABS, test persons were assigned braking tasks (straight and in-curve) with five different brake systems with and without ABS. Stopping distances as well as stress and strain on the riders were measured for 9 test riders who completed 105 braking manoeuvres each. Knowing the ability of ABS to avoid falls during braking in advance of a crash and taking into account the system costs, a cost benefit analysis for ABS for motorcycles was carried out for different market penetration of ABS, i.e. equipment rates, and different time horizons. The potential of VSC for motorcycles was estimated in two steps. First the kinds of accidents that could be prevented by such a system at all have been analysed. For these accident configurations, simulations and driving tests were then performed to determine if a VSC was able to detect the critical driving situation and if it was technically possible to implement an actuator which would help to stabilise the critical situation.
Fahrerassistenzsysteme unterstützen den Fahrer durch Information, Warnung oder Eingriff in die Fahrzeugsteuerung. Zukünftige Systeme zur Kollisionsvermeidung oder bis hin zum automatischen Fahren werden den Fahrer immer mehr entlasten. Wegen ihres erheblichen Potenzials zur Verbesserung vor allem der aktiven Sicherheit können die Fahrerassistenzsysteme wesentlich zur Vermeidung von Unfällen oder der Reduktion von Unfallfolgen beitragen. Andererseits können Fahrerassistenzsysteme aufgrund des komplexen Systemzusammenhangs zwischen Fahrer, Fahrzeug und Umwelt negative Auswirkungen auf das Verkehrsgeschehen haben. Dieser Aspekt muss schon bei der Entwicklung der Systeme berücksichtigt werden. Die Empfehlung der Europäischen Kommission zur Gestaltung von Informations- und Kommunikationssystemen gibt dazu Leitlinien vor. Die BASt ist mit der wissenschaftlichen Begleitung der Thematik beauftragt. Die Industrie ist dazu aufgefordert darzulegen, welche Maßnahmen zur Einhaltung der Grundsätze ergriffen worden sind beziehungsweise werden. Um das Potenzial der Fahrerassistenzsysteme zur Steigerung der Verkehrssicherheit voll ausschöpfen zu können, sind weiterhin Forschungsarbeiten zur Entwicklung neuer und zur Weiterentwicklung bestehender Systeme unter Berücksichtigung der Gestaltungsanforderungen für sichere Assistenzsysteme durchzuführen.
Since 2005 the German In-Depth Accident Study (GIDAS) also records aspects of active vehicle safety. This is done because vehicles are fitted with an increasing number of active safety devices which have undoubtedly an influence on the number, severity and course of accidents. Accident researchers expect that collecting active safety data will facilitate to assess and quantify the impact of these and future devices. It is the aim of this paper to outline benefits and limitations associated with the recording of active safety aspects within indepth studies. An overview about possible areas where active safety data can be useful will be given. For that purpose single safety or comfort systems will be selected to estimate the effects of an accident database which includes variables associated with these systems. Questions with regard to the limitations of collecting active safety data will be addressed. Possible items are for example the usability of the data recorded, the real accident cause, the small number of relevant accidents, the time span needed to gather a sufficient dataset, the small share of vehicles equipped with a certain system or different functionalities of systems that are supposed to fall in the same category. As a result user needs for a reasonable data collection of active safety elements will be elaborated.
Although the bus belongs to the safest traffic means, single accidents can be particularly severe and concern many passengers. Especially in case of fires a high number of injured and killed persons can be the outcome. Fire safety of buses therefore is of high importance. With the increase of synthetic and plastic materials as a material for the interior equipment of buses and coaches because of their ood mechanical properties combined with low weight, the question arises whether the safety level has decreased in case of a fire during the last years - also compared to other means of transport. Because of the combustible plastics and their ability to release a high amount of heat the main fire load in buses is no longer the fuel but the plastic materials which are also often easy to ignite. Besides the flammability of the equipments, the production of smoke, the smoke development and propagation and its toxicity for the people as well as the testing methods and limit values are of interest. For those reasons research projects were initiated on behalf of the German Federal Highway Research Institute. At the one hand the fire behavior of coach interiors was examined in general focusing on fire propagation as well as fire detection and signalling. As result, recommendations with regard to early fire detection systems for the engine compartments and on-board extinguishing equipment were elaborated. At the other hand research is carried out to examine heat release, smoke, smoke propagation and its toxicity due to burning bus interior materials. The paper describes which effective and economically reasonable fire safety requirements for interiors of buses would improve the current situation. Proposals for amendments of current requirements are recommended including the specification of appropriate limit values. In particular, it is taken into consideration which reasonable fire safety standards from other transport sectors, especially the rail sector, should be transferred to buses.
Except for corrective steering functions automatic steering is up to now only allowed at speeds up to 10 km/h according to UN Regulation No. 79. Progress in automotive engineering with regard to driver assistance systems and automation of driving tasks is that far that it would be technically feasible to realise automatically commanded steering functions also at higher vehicle speeds. Besides improvements in terms of comfort these automated systems are expected to contribute to road traffic safety as well. However, this safety potential will only be exhausted if automated steering systems are properly designed. Especially possible new risks due to automated steering have to be addressed and reduced to a minimum. For these reasons work is currently ongoing on UNECE level with the aim to amend the regulation dealing with provisions concerning the approval of steering equipment. It is the aim to revise requirements for automatically commanded steering functions (ACSF) so that they can be approved also for higher speeds if certain performance requirements are fulfilled. The paper at hand describes the derivation of reasonable system specifications from an analysis of relevant driving situations with an automated steering system. Needs are explained with regard to covering normal driving, sudden unexpected critical events, transition to manual driving, driver availability and manoeuvres to reach a state of minimal risk. These issues form the basis for the development of test procedures for automated steering to be implemented in international regulations. This holds for system functionalities like automatic lane keeping or automatic lane change as well as for addressing transition situations in which the system has to hand over steering to the driver or addressing emergency situations in which the system has to react instead of the driver.
Automatische Lenkfunktionen sind abgesehen von korrigierenden Lenkeingriffen entsprechend der UN-Regelung Nr. 79 bisher nur in einem Geschwindigkeitsbereich bis 10 km/h erlaubt. Die Weiterentwicklung der Technik im Bereich der Fahrerassistenzsysteme und der Automatisierung der Fahraufgabe wuerden es jedoch technisch erlauben, automatische Lenkfunktionen auch bei höheren Geschwindigkeiten einzusetzen. Neben einem Zugewinn an Komfort wird von diesen Systemen auch ein Beitrag zur Erhöhung der Verkehrssicherheit erwartet. Dieses Verkehrssicherheitspotenzial wird man jedoch nur ausschöpfen können, wenn die automatisierten Lenksysteme entsprechend gestaltet sind. Insbesondere sollten mögliche Risiken auf Grund automatischen Lenkens minimiert sein. Aus diesen Gründen laufen derzeit Arbeiten auf UNECE-Ebene, die Regelung Nr. 79 über einheitliche Bedingungen für die Genehmigung der Fahrzeuge hinsichtlich der Lenkanlage in Bezug auf automatische Lenkfunktionen (ACSF = Automatically Commanded Steering Functions) zu überarbeiten, um diese unter bestimmten Bedingungen auch bei höheren Geschwindigkeiten genehmigen zu können. Der vorliegende Beitrag reflektiert diese Arbeiten und stellt die Entwicklung der technischen Anforderungen an automatisches Lenken und der für die fahrzeugtechnischen Vorschriften vorgesehenen Testprozeduren dar.