Sonstige
Filtern
Erscheinungsjahr
Dokumenttyp
- Konferenzveröffentlichung (64)
- Buch (Monographie) (26)
- Bericht (1)
- Arbeitspapier (1)
Schlagworte
- Analyse (math) (92) (entfernen)
Institut
In der Bundesrepublik ereignen sich jährlich ca. 2 Millionen polizeilich erfasste Straßenverkehrsunfälle. Hiervon sind weniger als 1.000 Unfälle als Großunfälle einzuschätzen. Eine der zentralen Erkenntnisse der Untersuchung besteht darin, dass "Quantensprünge" in der Vermeidung und Bewältigung von Großunfällen erst zu erwarten sind, wenn alle beteiligten Organisationen und Institutionen die anstehenden Aufgaben als organisations- und beteiligtenübergreifendes Managementproblem betrachten und demgemäß handeln. Deshalb stand die Entwicklung des Organisationskonzepts für ein Großunfall-Management Straßenverkehr im Mittelpunkt der Fragestellung. Fallanalysen haben deutlich gezeigt, dass weder Maßnahmen zur Vermeidung noch Strategien zur Bewältigung von Großunfällen räumlich eng begrenzt werden können. Selbst Kreisgrenzen, die beispielsweise im Katastrophenfall von besonderer Bedeutung sind, eignen sich als Bezugsraum nur bedingt. Deshalb empfiehlt sich die "Region", die im politisch-administrativen System der Bundesrepublik begrifflich nicht eindeutig festgelegt ist, als Basiseinheit. Das Großunfall-Management wird in Abhängigkeit von den vorhandenen Risikostrukturen bedarfsgerecht zugeschnitten. Besonderer Wert wurde des weiteren auf eine angemessene Definition und Typisierung von Großunfällen, auf die empirische Analyse von Großunfällen sowie auf die Bewertung der gesetzlichen Grundlagen der Unfallvermeidung und -bewältigung gelegt. Ein differenzierter Katalog von Maßnahmen für die Vermeidung und Bewältigung von Großunfällen rundet die Untersuchung ab.
In India, heavy truck crashes on national highways account for a number of fatalities. But due to lack of in-depth crash data, detailed analysis is not possible to determine injury mechanisms, and to identify infrastructure, vehicle and human factors affecting these crashes. Over the past two years, researchers in India have established a crash investigation network, with the co-operation of the police and hospitals, to conduct crash investigations and in-depth crash data collection on national highways in the state of Tamil Nadu. This pioneering effort has resulted in the development of a heavy truck crash investigation methodology, the outcome of which is scientific and reliable crash data that has been able to provide good insight into truck crashes and their causes. This paper explains the need for truck crash investigations, the methodology, conclusions of the data analyzed up to date, and the need to focus on truck driver working conditions.
This study updates previous IIHS studies comparing estimated delta Vs for crash tested vehicles to the distribution of estimated delta Vs in the National Automotive Sampling System (NASS) Crashworthiness Data System (CDS). The delta V estimates for 232 frontal crash tests at 64.4km/h into a deformable barrier with 40 percent overlap are compared with estimates from frontal offset crashes in the 1997-2004 NASS database. All delta V estimates were based on SMASH, the delta V estimating program used by NASS since 1997. Results indicated that for all vehicles tested by IIHS, SMASH delta Vs were, on average, 32 percent lower than impact speeds and about 28 percent lower than the expected delta V. Almost 80 percent of all real-world frontal crashes resulting in AIS 3+ injuries and just over 60 percent of all fatal crashes occur at or below the average estimated delta V calculated for crash tested vehicles.
Cyclists are more likely to be injured in fatal crashes than motorised vehicles. To gain detailed and precise behavioural data of road users, i.e. trajectories, a measuring campaign was conducted. Therefore, a black-spot for accidents with cyclists in Berlin, Germany was selected. The traffic has been detected by a fully automated traffic video analysis system continuously for twelve hours. The video surveillance system is capable of automatically extracting trajectories, classifying road user types and precise determining and positioning of conflicts and accidents. Additionally, pre-conflict and pre-accident situations could be analysed to provide further in-depth understanding of accident causation. The evaluation of the measuring campaign comprised the investigation of traffic parameters, e.g. traffic flow, as well as traffic-safety related parameters based on Surrogate Safety Measures (SSM). Furthermore, the spatial and temporal distributions of conflicts involving cyclists were determined. As a result, three possible conflict clusters could be identified, of which one cluster could be confirmed by detailed video analysis, showing conflicts caused by right turning vehicles.
The NHTSA-sponsored Crash Injury Research and Engineering Network (CIREN) has collected and analyzed crash, vehicle damage, and detailed injury data from over 4000 case occupants who were patients admitted to Level-I trauma centers following involvement in motor vehicle crashes. Since 2005, CIREN has used a methodology known as "BioTab" to analyze and document the causes of injuries resulting from passenger vehicle crashes. BioTab was developed to provide a complete evidenced-based method to describe and document injury causation from in-depth crash investigations with confidence levels assigned to the causes of injury based on the available evidence. This paper describes how the BioTab method is being used in CIREN to leverage the data collected from in-depth crash investigations, and particularly the detailed injury data available in CIREN, to develop evidence-based assessments of injury causation. CIREN case examples are provided to demonstrate the ability of the BioTab method to improve real-world crash/injury data assessment.
The share of high-tensile steel in car bodies has increased over the last years. While occupant safety has generally benefited from this measure, there is a potential risk that, as a result, rescue time may increase considerably. In more than 60% of all car occupant fatalities a technical rescue has been necessary. These are in particular those cases where occupants die immediately at the accident scene. Therefore, in these cases "rescue time" is a very sensitive parameter. In addition to the general analysis of the need of technical rescue and the actual rescue time depending on model years, the injury pattern of occupants requiring technical rescue will be analysed to provide advice for rescue teams. Furthermore, a detailed analysis of rescue measures for the most popular car models depending on the safety cell design is given.
Nowadays, traffic accidents are recorded in historical databases. Regarding the huge quantity of data, the use of data mining tools is essential to help Experts, for automatically extracting relevant information in order to establish and quantify relations between severity and potential factors of accidents. An innovative approach is here proposed for an in depth investigation of real world accidents data base. Mutual information ratio based on conditional entropies is used to quantity the association strength between an accident outcome descriptor (injury severity) and other potential association factors. Information theoretic methods help to select automatically groups of factors mostly responsible of the severity of accident.
The number of injuries sustained by car occupants involving the head, thorax, spine, pelvis and the upper limbs have been reduced significantly during recent years. This is probably due to better safety features in the cars, especially the availability and usage of safety belts, airbags etc. Therefore one can notice clinically a relative increase in survivors of severe frontal crashes, but many of them have injuries to the lower extremities. To verify this, we analyzed the foot and ankle injuries of front seat passengers.
Europe has benefited from a decreasing number of road traffic fatalities. However, the proportion of older road users increases steadily. In an ageing society, the SENIORS project aims to improve the safe mobility of older road users by determining appropriate requirements towards passive vehicle safety systems. Therefore, the characteristics of road traffic crashes involving the elderly people need to be understood. This paper focuses on car occupants and pedestrians or cyclists in crashes with modern passenger cars. Ten crash databases and four hospital statistics from Europe have been analysed to answer the questions on which body regions are most frequently and severely injured in the elderly, and specific injuries sustained by always comparing older (65 years and above) with midâ€aged road users (25â€64 years). It was found that the body region thorax is of particularly high importance for the older car occupant with injury severities of AIS2 or AIS3+, where as the lower extremities, head and the thorax need to be considered for older pedestrians and cyclists. Further, injury risk functions were provided. The hospital data analysis showed less difference between the age groups. The linkage between crash and hospital data could only be made on a general level as their inclusion criteria were quite different.
The purpose of this work is to investigate the association between the injuries in motorcycle accident and the main accident configurations. The data were provided by a multicentric case-control study MAIDS regarding the risk of crash and injuries of motorcyclists. Chi-square test was used to evaluate the relationship between the variables and a logistic regression was performed to evaluate the association of injury severity with some variables supposed to be predictive factors. Lesive patterns characterized by internal haemorrhages are mainly associated with fronto-lateral crashes, above all in urban areas. Lacerations or abrasions, mainly reported in torso and lower extremities, are mostly associated with single crashes or accidents in queue also for crashes occurred to low speed (< 50 km/h). The severity of injuries is highly associated with impact speed, regardless of the crash configuration. Fractures and haemorrhages play an important role in determining the severity of injuries. The upper extremities are the most frequently traumatised anatomic areas.
Novice drivers are at high risk for crash involvement. We performed an analysis of causations, injury patterns and distributions of novice drivers in cars and on motorcycles in road traffic as a basis for proper measurements. Method Data of accident and hospital records of novice drivers (licence < 2 years) were analysed focusing the following parameters: injury type, localisation and mechanism, Abbreviated Injury Scale (AIS), maximum AIS (MAIS), delta-v, collision speed and other technical parameters and have been compared to those of experienced drivers. In 18352 accidents in the area of Hannover (years1985"2004), 2602 novice drivers and 18214 experienced drivers were recorded having an accident. Novice car drivers were more often and severe injured than experienced and on motorcycles the experienced riders were at higher risk. Novice drivers of both groups sustained more often extremity injuries. 4.5 % novice car drivers were not restraint compared to 3.7 % of the experienced drivers and 6.1 % novice motorcycle drivers did not wear a proper helmet (versus 6.5 %). Severe injuries sustained at a rate of 20 % at collision speeds below 30 km/h and in 80% at collision speeds above 50 km/h. Novice car drivers drove significant older cars. The risk profile of novice drivers is similar to those of drivers older than 65 years. Structural protection and special lectures like skidding courses could be proper remedial action next to harder punishment of violations.
A lot of factors are related to a road traffic accident; particularly human factors such as road use characteristic, driving maneuver characteristic and safety attitude are the major ones. As a random factor is also included, so it is necessary to minimize the contribution of a random factor to identify human factors related to a road traffic accident. There are several standpoints for traffic accident analysis, such as vehicle-based, location-based and driver-based. And it is effective to analyze driver-based traffic accident data for discussion on the relation between human factors and accidents. An integrated traffic accident database system was developed for analysis considering driver- accident and violation records by ITARD, and several studies were carried out for the evaluation. Useful data for discussion on the relation between types of collision and traffic violations, and the effect of accident experience to the following accident were obtained.
Intelligente Bauwerke - Anforderungen an die Aufbereitung von Messgrößen und ihrer Darstellungsform
(2015)
Ziel des Forschungsvorhabens FE 15.0548/2011/GRB war die Ausarbeitung einer Konzeption zu Anforderungen an die Aufbereitung und Verarbeitung von Messgrößen und ihrer Darstellung. Dies beinhaltete die Evaluierung und Entwicklung verschiedener modellbasierter und statistischer Analyseverfahren, die über den bisherigen Stand der Technik der Bauwerksüberwachung hinausgehen. Der Nutzen liegt in der Herausfilterung relevanter Informationen aus umfangreichem Datenmaterial (Vor-Aggregation) sowie der Erzeugung von belastbaren Zustandsinformationen bzw. Vorergebnissen hierzu durch eine frühzeitige, leistungsfähige Plausibilisierung. Es wurde gezeigt, dass durch den Einsatz von leistungsfähigen, gedächtnisbehafteten, selbstlernenden Algorithmen für die Sensorfusion, Interpolation, Plausibilitätserhöhung und Treffen fachtechnischer Monitoringaussagen Ergebnisse erzielt werden können, die bezüglich der Verarbeitung von Mess- und Erfassungsdaten weit über den aktuellen Stand beim Brückenmonitoring hinausgehen. Anhand mehrerer Szenarien, für die reale Erfassungsdaten zur Verfügung standen, wurde gezeigt, dass diese Verfahren sehr zuverlässig verschiedenste Signalstörungen, wie Messausreisser, erhöhtes Rauschen und Brummeinstreuung erkennen können. Nur durch die frühzeitige und zuverlässige Plausibilisierung von Sensordaten von Brückenbauwerken kann verhindert werden, dass offensichtlich fehlerhafte Messwerte (wie z.B. Messausreisser, störungsbehaftete Messungen) zu falschen Vorhersagen der Systemzuverlässigkeit von Brückenbauwerken durch rechnergestützte Systemmodelle führen.
Interdisciplinary accident research and research projects of AARU Audi Accident Research Unit
(2017)
AARU (Audi Accident Research Unit) is an interdisciplinary research project of the University Hospital Regensburg in cooperation with AUDI AG. Specific objective is to comprehend the respective accident scenario and retrieve generally applicable findings as to technical, medical and psychological processes. In order to prevent traffic accidents and to alleviate vehicle accident consequences, postulates of general traffic safety, human-machine interaction, technical design and function of new vehicles and occupant as well as third party protection shall be inferred from these findings. Specifically, each accident with new Audi, Lamborghini and Ducati vehicles involved is analyzed interdisciplinary, discussed in a case meeting and anonymously documented with more than 2,000 parameters. The database is continually used for solving safety relevant issues. Parallel to accident analysis, research projects are performed in the fields medicine, psychology and engineering in order to gain comprehensive insight and identify potential additional areas of activity of accident research.
Ziel der Arbeit war die Aufstellung von Maßnahmen, die zur Erhöhung der nächtlichen Verkehrssicherheit auf außerörtlichen Straßen (ohne BAB) geeignet erscheinen. Die Maßnahmen wurden bezüglich ihrer Wirksamkeit bewertet, ihre Durchsetzbarkeit abgeschätzt. Einer detaillierten Auswertung der relevanten Unfallstatistik folgen die Aufstellung und Beschreibung spezifischer Maßnahmen. Diese werden bewertet und einer Prioritätenreihung unterzogen. Umsetzungsmöglichkeiten werden ausführlich diskutiert. Die aus der Untersuchung abgeleiteten Empfehlungen betreffen in erster Linie verstärkte Informationsarbeit und die Beseitigung von Unfallschwerpunkten.
Internationally, the need is expressed for harmonized traffic accident data collection (PSN, PENDANT, etc.). Together with this effort of harmonization, traffic accident investigation moves more and more in the direction of accident causation. As current methods only partly address these needs, a new method was set up. The main characteristics of this method are: • Accident/injury causation (associated) factors can objectively be identified and quantified, by comparison with exposure information from a normal population. • All relevant accident and exposure data can be included: human-, vehicle-, and environmental related data for the pre-crash, crash and postcrash situation (the so-called Haddon matrix). The level of detail can be chosen depending on interest and/or budget, which makes the method very flexible. In this paper the accident collection and control group method are presented, including some of the achieved results from a pilot study on 30 truck accidents and 30 control locations. The data were analyzed by using cross-tabulations and classification-tree analysis. The method proved useful for the identification of statistically significant causational aspects.
This study that was funded by the Research Association for Automotive Technology (FAT) develops a method for the evaluation of the placement of tanks or batteries by using the deformation frequencies in real-world accidents. Therefore, the deformations of more than 20.000 passenger cars in the GIDAS database are analysed. For each vehicle a contour of deformation is calculated and the deformed areas of the vehicles are transferred in a rangy matrix of deformation. Thereby, the vehicle is divided into more than 190.000 cells. Afterwards, all single matrices of deformation are summarized for each cell which allows representative analyses of the deformation frequencies of accidents with passenger cars in Germany. On the basis of these deformation frequencies it is possible to determine least deformed areas of all passenger cars. Furthermore, intended placements of tanks or batteries can be estimated in an early stage of development. Therefore, all vehicles with deformations in the intended tank areas can be analysed individually. Considering numerous parameters out of the GIDAS database (e.g. collision speed, kind of accident, overlap, collision partner etc.) the occurring forces can be calculated or the deformation frequency can be estimated. Furthermore, it is possible to consider the influence of primary and secondary safety systems on the deformation behaviour. The analysis of "worst case accident events" is an additional application of the calculated matrix of deformation frequency.
Teil 1: In der Verkehrssicherheitsforschung können Sicherheitswirkungen zumeist nicht im (Labor)experiment sondern nur durch Feldversuche, die einem Experiment ähnlich anzulegen sind, erfasst werden. In diesem Zusammenhang spricht man von einem Quasi-Experimentellen-Design. Da sich bei solchen Quasi-Experimenten immer die Frage stellt, ob die gemessenen Änderungen maßnahmebedingt sind oder auf andere Einflüsse zurückgeführt werden können, werden verschiedene Gefahrenquellen benannt und mit Beispielen belegt, die die Gültigkeit der Ergebnisse von Wirksamkeitsuntersuchungen beeinträchtigen können. Es werden darüber hinaus eine Reihe wichtiger Quasi-Experimenteller-Designs dargestellt, die Vor- und Nachteile der Designs diskutiert und Hinweise auf mögliche Einsatzfelder gegeben. Um die Qualität der Ergebnisse von Wirksamkeitsuntersuchungen zu verbessern, wird vorgeschlagen, mehrere Erhebungen mittels ein und derselben Untersuchungsanordnung zugleich an mehreren Orten oder an mehreren Untersuchungsgruppen durchzuführen. Es werden mehrere simultane Untersuchungsdesigns vorgestellt und Einsatzbereiche erläutert. Teil 2: Simultane Wirksamkeitsuntersuchungen von Maßnahmen zur Hebung der Verkehrssicherheit erfordern häufig statistische Methoden zur Analyse von Kennzahlen, die auf andere Kennzahlen bezogen sind. Diese bezogenen Kennzahlen bezeichnet man als Risikogrößen. Es werden Methoden vorgestellt und diskutiert, die eingesetzt werden können, wenn entweder die Bezugsgrößen fest oder stochastisch sind.
While the number of fatal accidents is diminishing every year, there is still a need of improvement and action to prevent these deaths. Basis for this purpose has to be an analysis about the factors influencing the car crash mortality. There are various studies describing the univariate influence of several factors, but crash scenarios are too complex to be described by a single variable. The multivariate analysis respects the interference of the variables and gets so to more detailed and representative results. This multivariate analysis is based on about 2,600 cases (the data have been collected by the accident research units Hannover and Dresden (during the years 1999-2003). This paper presents a multivariate model (containing ten different variables) which detects 93% of these cases properly. This means it detects the cases as truly survived and truly death.
Motorcycle crashes in Austria: Analysis of causes and contributing factors based on in-depth data
(2017)
From CEDATU, the in-depth accident database run by the Vehicle Safety Institute at Graz University of Technology, a representative sample of 101 crashes involving at least one motorcycle was selected. The analysis focused on causes for crashes as well as on contributing factors, but also included parameters of road, riders and vehicles. Own riding speed and "unexpectable action by another road user" were the most frequent causes for accidents. Inappropriate safety distance or delayed reaction were frequent, both as causation factors and as contributing factors. Infrastructure issues never cause an accident, but they are very frequent as contributing factors; road geometry and road guidance are by far most frequent among these. This paper also discusses accidents by type and other parameters (e.g. injury severity by body region, collision speed, age and others), and compares accident causes to previous studies as well as the police reported accident statistics.
Powered Two Wheeler (Motorcycle) crashes are overrepresented in EU, England, and United States casualty statistics for both fatal and serious injuries. While regional geographic differences are evident for motorcycle size, type, and engine displacement, the casualty statistics consistently indicate significantly higher injury rates for all motorcycle riders when compared to car occupants. Accident analysis and reconstruction of these motorcycle crashes is a necessary process to gain further understanding of potential injury mitigation strategies. This paper focuses on the analysis of the rider post impact trajectory in the immediate moments following a crash. The rider and motorcycle, while loosely coupled by seating position leading up to a crash, quickly decouple as the crash forces develop. As a result, the rider moves relative to the motorcycle and relative to the collision partner. This movement, or trajectory, is primarily influenced by the type and configuration of the impact, the type and configuration of the motorcycle and collision partner, and the speeds involved. Understanding the rider's post impact trajectory will assist in the development of injury mitigation strategies. Both the free flight trajectory of the rider and the rider's trajectory as influenced by interaction with the motorcycle and collision partner are examined. Rider trajectories in full scale crash testing and real world motorcycle crashes are both studied and presented. The resulting physical evidence that can be observed by an accident analyst is discussed. The application of projectile motion physics is analyzed and the necessary input parameters, such as initial launch angle, are studied. This study will assist in understanding the post-impact dynamics of a motorcyclist, and will provide useful information to analysts evaluating real world crashes.
Empirical vehicle crashworthiness studies are usually based on national or in-depth traffic accident surveys: Data on accident-involved cars/drivers are analysed in order to quantify the chance of driver injury and to assess certain risk factors like car make and model. As the cars/drivers involved in the same accident form a "cluster", where the size of the cluster equals the number of accident-involved parties, traffic accident survey data are typical multi-level data with accidents as first-level or primary and cars/drivers as secondlevel or secondary units (car occupants in general are to be considered as third level units). Consequently, appropriate statistical multi-level models are to be used for driver injury risk estimation purposes as these models properly account for the cluster structure of traffic accident survey data. In recent years various types of regression models for clustered data have been developed in the statistical sciences. This paper presents multi-level statistical models, which are generally applicable for vehicle crashworthiness assessment in the sense that data on single and multiple car crashes can be analysed simultaneously. As a special case of multi-level modelling driver injury risk estimation based on paired-by-collision car/driver data is considered. It is demonstrated that assessment results may be seriously biased, if the cluster structure inherent in traffic accident survey data is erroneously ignored in the data analysis stage.
Pedestrian accidents are one of the major concerns related with road accidents around the world. Portugal has one of the highest rates of pedestrian fatalities in Europe. In this paper an overview conditions were the pedestrian accidents occurred in Portugal is presented. In the last years, a project related with the pedestrian accidents has run in Portugal for the period 2004-2006 where 603 people died, 2097 have been severely injured and about 17000 slightly injured. Within this project all the pedestrian accidents in this period have been analysed providing global information about a wide range of aspects, since location, driver and pedestrian characteristics, weather and road conditions, among others. In addition, 50 in-depth accidents have been investigated and the data collected according the Pendant methodology. For this in-depth methodology detailed information about the accident has been collected, including injuries, vehicle damage, road conditions and road user- behaviour and actions. An accident reconstruction has been carried for each case including the determination of the speeds and driver actions, and the analysis of the contributing factors for the accident. Depending of the accident complexity, different methodologies have been used to analyse these accident, from the classical analytical equations such as Simms and Woods, to the use of detailed computational pedestrian models as those included in the commercial software- PC-Crash-® or Madymo-®. Also one of the goals of our investigation is the development of multibody models and methodologies for the reconstruction of pedestrian accidents. Some of these tools integrated in the commercial software Cosmos Motion-® are presented. The advantages of the different approaches are compared and discussed for some of the accidents investigated. With these tools the impact speed can be determined from the projection distance with analytical tools or PC-Crash-®, but more complex tools should be used to determine speed from the injuries, what is especially important for fatal accidents. The influence of the vehicle geometry and stiffness characteristics is another aspect analysed, where the influence of the vehicle stiffness has been determined using a combined multibody-finite elements approach within the software Madymo-®.
A means of assessing the passive safety of automobiles is a desirable instrument for legislative bodies, the automobile industry, and the consumer. As opposed to the dominating motor vehicle assessment criteria, such as engine power, spaciousness, aerodynamics and consumption, there are no clear and generally accepted criteria for assessing the passive safety of cars. The proposed method of assessment combines the results of experimental safety tests, carried out according to existing legally prescribed or currently discussed testing conditions, and a biomechanical validation of the loading values determined in the test. This evaluation is carried out with the aid of risk functions which are specified for individual parts of the body by correlating the results of accident analysis with those obtained by computer simulation. The degree of conformance to the respective protection criterion thus deduced is then weighted with factors which take into account the frequency of occurrence and the severity of the accident on the basis of resulting costs. Each of the test series includes at least two frontal and one lateral crash test against a deformable barrier. The computer-aided analysis and evaluation of the simulation results enables a vehicle-specific overall safety index as well as partial and individual safety values to be determined and plotted graphically. The passive safety provided by the respective vehicle under test can be defined for specific seating positions, special types of accident, or for individual endangered parts of the body.
Die Erkennung von Sicherheitsdefiziten im Straßennetz erfolgt zurzeit im Wesentlichen im Rahmen der örtlichen Unfalluntersuchungen. Dabei werden überwiegend punktuelle Unfallhäufungen identifiziert und analysiert. Für die Analyse von Straßennetzen wurden mit den "Empfehlungen für die Sicherheitsanalyse von Straßennetzen (ESN)" Verfahren vorgestellt, die für eine netzweite Analyse von Straßen geeignet sind und die Identifikation von Sicherheitsdefiziten in einem größeren Maßstab ermöglichen. Im Rahmen des vorliegenden Projektes wurde eine pilothafte Anwendung der Verfahren nach ESN für das Straßennetz des überörtlichen Verkehrs in Rheinland-Pfalz vorgenommen. Der Fokus der Untersuchung lag auf der Frage, ob und in welchem Umfang mit einer weitestgehend automatisierten Vorgehensweise sowie unter Verwendung der digital verfügbaren Daten eine sinnvolle Anwendung der ESN möglich ist. Die in den Straßendatenbanken geführten Abschnitte erweisen sich jedoch für die Zielsetzung der ESN als zu feingliedrig. Daher wurden vertiefende Untersuchungen zur Abschnittsbildung durchgeführt. Dabei wurden fünf Varianten der Abschnittsbildung betrachtet. Ergänzend zur Abschnittsbildung nach ESN mit mindestens 4 U(SP) pro Abschnitt wurde zusätzlich die zeitliche und räumliche Verteilung der U(P) untersucht. Bei ihrer Verwendung sind insgesamt stabilere Ergebnisse zu erwarten. Der Vergleich der sicherheitspotenziale bei einer Abschnittsbildung nach Netzstruktur mit den Unfallkostenraten von Unfallhäufungslinien zeigt in vielen Fällen Überschneidungen. aufgrund der stabileren Ergebnisse eines längeren Untersuchungszeitraums (1999 bis 2004) wird eine Verlängerung des von den ESN vorgesehenen Untersuchungszeitraums empfohlen. Es ist festzuhalten, dass die ESN-Verfahren eine Vorauswahl von auffälligen Streckenabschnitten liefern, deren Verbesserung zu einer deutlichen Steigerung der Verkehrssicherheit führen könnte. Inwiefern die ermittelten Sicherheitspotenziale tatsächlich durch geeignete Maßnahmen ausgeschöpft werden können, muss durch eine Detailanalyse geprüft werden.
One of the major problems of road safety in Europe is the powered two wheelers accidents. One of the European countries with one of the highest rates is Portugal where in 2006, mopeds and motorcycles fatalities represented 27% of all road users deaths. In this work, a deep analysis and overview of the current state of mopeds and motorcycles accidents for the 2004-2006 period is presented. Within this period 830 PTW occupants die, 2958 have been severely injured and 25000 suffer slight injuries. A detailed analysis of the conditions of these accidents has been carried out, using the data of the national accident database. This analysis provides global information, about geographic environmental conditions, driver- characteristics among others. From this data detailed information is obtained allowing to know when, where and who. In order to answer the question why more a widely collection of data has been collect for 70 accidents. The data has been collected using OECD methodology. For these accidents a detailed reconstruction has been carried out, what is especially important for fatal accidents where for instance speed in an important factor. From these collection and analysis of data a wider overview of facts and measures are extracted. Among them, some are emphasized such as that the quality and non-use of helmets plays an important role in severe and fatal accidents especially for accidents involving moped vehicles, or speed is the most important factor in fatal accidents involving motorcycles. Concerning motorcycle accident reconstruction, different tools can be used depending of the accident scenario and complexity. For simple cases, with specific characteristics, analytical formulation based in vehicle crash dynamics can be use in order to determine the impact speed of the vehicles impact, analysing the skid marks, deformations, victims rest position and considering parameters (EES, vehicle deceleration, etc). Aspects such as the energy absorption capability of motorcycles are also discussed. In the general cases the accident reconstruction software Pc-Crash has been used for the reconstruction of the accident. In very complex cases, has for instance the impact between motorcyclist and barriers, Madymo software is used especially to determine speed from injuries. An example of the impact of a motorcyclist and a motorcyclist-friendly barrier is present to illustrate the benefits and limitations of such systems.
In recent years special attention has been paid to reducing the number of fatalities resulting from road traffic accidents. The ambitious target to cut in half the number of road users who are killed each year by 2010 compared with the 2001 figures, as set out in the European White Paper "European Transport Policy for 2010: Time to Decide" implies a general approach covering all kinds of road users. Much has been achieved, e.g. in relation to the safety of car passengers and pedestrians but PTW accidents still represent a significant proportion of fatal road accidents. More than 6,000 motorcyclists die annually on European roads which amounts to 16% of the EU-15 road fatalities. The European Commission therefore launched in 2004 a Sub- Project dealing with motorcycle accidents within an Integrated Project called APROSYS (Advanced PROtection SYStems) forming part of the 6th Framework Programme. In a first step, the combined national statistical data collections of Germany, Italy, the Netherlands and Spain were analysed. Amongst other things parameters like accident location, road conditions, road alignment and injury severity have been explored. The main focus of the analysis was on serious and fatal motorcycle accidents and the results showed similar trends in all four countries. From these results 7 accident scenarios were selected for further investigation via such in-depth databases as the DEKRA database, the GIDAS 2002 database, the COST 327 database and the Dutch element of the MAIDS database. Three tasks, namely the study of PTW collisions with passenger cars, PTW accidents involving road infrastructure features, and motorcyclist protective devices have been assessed and these will concentrate inter alia on accident causes, rider kinematics and injury patterns. A detailed literature review together with the findings of the in-depths database analysis is presented in the paper. Conclusions are drawn and the further stages of the project are highlighted.
Ziel des Forschungsvorhabens war es zu untersuchen, ob in verschiedenen Prüfstellen mit dem Walzsektor-Verdichtungsgerät hergestellte Asphalt-Probeplatten gleiche Eigenschaften aufweisen, damit z.B. verträgliche Ergebnisse für Performance-Prüfungen ermittelt werden können. Dazu wurde in 12 Prüfstellen ein Verfahrens-Audit durchgeführt, um eine einheitliche Vorgehensweise bei der Herstellung dieser Platten zu gewährleisten. Anschließend wurden aus verschiedenen Asphaltvarianten WSV-Platten hergestellt und an daraus gewonnenen Probekörpern umfangreiche Performance-Prüfungen durchgeführt. Die ermittelten Ergebnisse zeigen, dass es möglich ist WSV-Platten mit verträglicher Raumdichte in unterschiedlichen WSV-Geräten sowie verschiedenen Prüfstellen herzustellen. Die Ergebnisse der Spurbildungs-, Druck-Schwell- und Zugversuche haben gezeigt, dass die WSV-Platten trotz ähnlicher Raumdichten nicht zwangsläufig verträgliche Ergebnisse im Versuch aufweisen und sich daher in verschiedenen Prüfstellen keine vergleichbaren Ergebnisse für diese Versuche ermitteln lassen. Lediglich bei den Abkühl- und Spaltzug-Schwellversuchen konnten verträgliche Ergebnisse erzielt werden. Für keine der ermittelten Kenngrößen der Performance-Prüfungen ließen sich Zusammenhänge mit der Raumdichte ermitteln. Somit lässt sich die Größe der Ergebnisse bei den Versuchen nicht auf unterschiedliche Größen der Raumdichten der Probekörper zurückführen. Da sich trotz geringer Unterschiede in den Raumdichten nur in ausgewählten Performance-Untersuchungen Unterschiede zeigen, ist davon auszugehen, dass die Streuungen in den Performance-Untersuchungen vornehmlich auf die Sensitivität dieser Versuche zurückzuführen sind. Das Verfahren zur Herstellung von Probekörpern für Performance-Prüfungen aus WSV-Platten scheint aufgrund der Gesamtheit der ermittelten Kenngrößen (Raumdichte, etc.), deren Aussehen, den Erkenntnissen aus dem Verfahrensaudit sowie der Performance-Prüfungen das richtige Verfahren zu sein.
Proposal for a test procedure of assistance systems regarding preventive pedestrian protection
(2011)
This paper is showing a proposal for a test procedure regarding preventive pedestrian protection based on accident analysis. Over the past years pedestrian protection has become an increasing importance also during the development phase of new vehicles. After a phase of focusing on secondary safety, there are current activities to detect a possible collision by assistance systems. Such systems have the task to inform the driver and/or automatically activate the brakes. How practical is such a system? In which kind of traffic situations will it work? How is it possible to check the effectiveness of such a system? To test the effectiveness, currently there are no generally approved identifiable procedures. It is reasonable that such a test should be based on real accidents. The test procedure should be designed to test all systems, independent of the system- working principle. The vFSS group (advanced Forward-looking Safety Systems) was founded to develop a proposal for a technology independent test procedure, which reflects the real accident situation. This contribution is showing the results of vFSS. The developed test procedure focuses on accidents between passenger cars and pedestrians. The results are based on analysis results of in-depth databases of GIDAS, German insurers and DEKRA and added by analysis of national and international statistics. The in-depth analysis includes many pre-crash situations with several influencing factors. The factors are e. g. speed of the car, speed of the pedestrian, moving direction and a possible obscuration of the pedestrian by an object. The results comprise also the different situations of adults and children. Furthermore, they include details regarding influence of the lighting conditions (daylight or night) especially with respect to the accident consequences. In fact, more accidents happen at daylight, but fatal accidents are more often at night. A clustering of parameter combinations was found which represents typical accident scenarios. There are six typical accident scenarios which were merged in four test scenarios. The test scenarios are varying the starting position of the pedestrian, the pedestrian size (adult or child) and the speed of the pedestrian, whereas the speed of the car will not be varied. To ensure the independency from used sensing technologies it is necessary to use a suitable dummy. For example, if sensors are based on infrared, the dummy should emit the temperature of a human being. The test procedure will identify the collision speed as the key parameter for assessing the effectiveness of the tested system. The collision speed is defined as the reduction between initial test speed of the car and impact speed. The assessment of the speed reduction value regarding the safety benefit, however, will be part of a separate procedure.
Zentrale Zielsetzung dieses Forschungsvorhabens ist die Ableitung einer Grundlage für die quantitative Abschätzung der Sicherheitswirkungen verschiedener Bau-, Gestaltungs- und Betriebsformen von Landstraßen. Hierzu wurden erreichbare Unfallraten und Unfallkostenraten von Landstraßen differenziert nach Ausbaustandard und Betriebsformen abgeleitet. Die Unfallkenngrößen wurden dabei getrennt für die drei Teilbereiche eines Landstraßenzuges (freie Streckenabschnitte, Einflussbereiche von Knotenpunkten, Knotenpunkte) ermittelt. Während die mittlere Unfallkostenrate eines Untersuchungskollektives von Straßenabschnitten nur eine Aussage über die durchschnittlichen Unfallkosten in Bezug auf die Fahrleistung dieses Kollektives treffen, soll die Grundunfallkostenrate die bei richtliniengerechter Anlage einer Straße (Gestaltung und Betrieb) möglichen fahrleistungsabhängigen Unfallkosten widerspiegeln. Bei der Ermittlung der Grundunfallkostenraten dürfen prinzipiell nur richtliniengerecht ausgebildete Straßen Berücksichtigung finden. Aus der zugrunde liegenden Datenbasis war allerdings nicht erkennbar, ob es sich im Einzelfall um richtliniengerechte oder nicht richtliniengerechte Straßen handelt. Es war davon auszugehen, dass das Untersuchungskollektiv auch nicht richtliniengerechte Anlagen umfasst. Dabei ist zusätzlich das Maß der Abweichung von einer richtliniengerechten Straße unbekannt, sodass keine Aussage darüber getroffen werden kann, inwieweit sich der "Grad der Unsicherheit" auch auf das Unfallgeschehen auswirkt. Bislang existiert kein Verfahren, um aus einem inhomogenen Untersuchungskollektiv, das sowohl richtliniengerechte Straßen als auch nicht richtliniengerechte Straßen umfasst, Grundunfallkostenraten abzuleiten. Daher wurde ein Verfahren entwickelt, das durch statistische Analysen eine Abschätzung der Grundunfallkostenraten aus einem inhomogenen Untersuchungskollektiv ermöglicht. Anhand des entwickelten Verfahrens wurden anschließend die Grundunfallkostenraten für alle im Rahmen der vorliegenden Untersuchung betrachteten Straßen (differenziert nach Querschnittstypen und Knotenpunktarten) abgeleitet.
Für das Forschungsvorhaben wurden Performance-Kennwerte in den Phasen der Asphaltmischgutkonzeption, Asphaltmischgutproduktion und nach dem Asphalteinbau an 21 Baumaßnahmen für die Asphaltdeck-, -binder- und -tragschicht systematisch erfasst und ausgewertet. Als Performance-Kennwerte dienten die Ergebnisse aus den Prüfungen zur Steifigkeit, zum Widerstand gegen Kälterissbildung, zum Ermüdungs- und Verformungs-widerstand sowie zur Griffigkeitsentwicklung. Die Untersuchungen lieferten wichtige Erkenntnisse und Tendenzen bei einzelnen Performance-Kennwerten, die bereits jetzt für zwei methodische Ansätze zur Festlegung künftiger vertragsrelevanter Anforderungen genutzt werden konnten: Einerseits wurde ein Vorschlag für eine spezifische Kategorisierung von Performance-Kennwerten innerhalb der europäischen Normung aufgezeigt, andererseits konnte mit Hilfe multipler linearer Regressionsanalysen ein möglicher Weg zur Abschätzung von Performance-Kenngrößen der fertigen Schicht aus der Erstprüfung aufgezeigt werden, sodass Anforderungswerte vorab definiert werden können. Zudem zeigte sich, dass, auch wenn im Wesentlichen die Ergebnisse der konventionellen Asphaltkontrollprüfungen die Anforderungen der ZTV Asphalt erfüllen, es nicht sichergestellt ist, dass Nutzungsdauern von mindestens 30 Jahren erreicht werden können. Dies resultiert im Wesentlichen aus den Unterschieden der Performance-Kenngrößen der drei Phasen, vor allem der Ermüdungsversuche. Deshalb wurden für die Modifikation des Sicherheitskonzeptes für die rechnerische Dimensionierung zwei Ansätze vorgestellt. Es erscheint aber zwingend erforderlich, dass durch weitere Untersuchungen die erstellte Datenbank ergänzt wird. Zudem sollten die im Projekt untersuchten Strecken einer weiteren Beobachtung unterzogen werden, um den Prozess der Alterung erfassen zu können. Damit kann auch eine Validierung des Dimensionierungsverfahrens erfolgen.
Since the compulsory use of child restraints for children up to 5 years of age was introduced in 2000, restraint use among younger children has increased significantly. However, the observed rate of child restraint use plateaus at around 50%, and apparently little spillover effect has been found for older children who are not covered by the law. This report examines the restraint use patterns for children who were injured in cars in relation to driver and child passenger characteristics. Univariate and multivariate analyses were conducted to describe the association between the outcome measure (the proper use of restraints for children) and relevant variables. Better ways for parents and caregivers to improve the use of restraints for children are also discussed.
While cyclists and pedestrians are known to be at significant risk for severe injuries when exposed to road traffic accidents (RTAs) involving trucks, little is known about RTA injury risk for truck drivers. The objective of this study is to analyze the injury severity in truck drivers following RTAs. Between 1999 and 2008 the Hannover Medical School Accident Research Unit prospectively documented 43,000 RTAs involving 582 trucks. Injury severity including the abbreviated injury scale (AIS) and the maximum abbreviated injury scale (MAIS) were analyzed. Technical parameters (e.g. delta-v, direction of impact), the location of accident, and its dependency on the road type were also taken into consideration. The results show that the safety of truck drivers is assured by their vehicles, the consequence being that the risk of becoming injured is likely to be low. However, the legs especially are at high risk for severe injuries during RTAs. This probability increases in the instance of a collision with another truck. Nevertheless, in RTAs involving trucks and regular passenger vehicles, the other party is in higher risk of injury.
Safety of light goods vehicles - findings from the German joint project of BASt, DEKRA, UDV and VDA
(2011)
Light goods vehicles (LGVs) are an important part of the vehicle fleet, providing a vital component in the European transportation system. On the other hand, LGVs are in the focus of public discussion regarding road safety. In order to analyse the accident situation of LGVs in an objective manner, Federal Highway Research Institute (BASt), VDA, DEKRA and German Insurers Accident Research (UDV) launched a joint project. The aim of this project, which will be finished by mid of 2011, is to identify reasonable measures which will further improve the safety of LGVs. For the first time, these partners jointly together conducted a research project and put together their know-how in accident research. Analyses are based on real-life accident data from the GIDAS database, the Accident Database of UDV (UDB), the DEKRA database and national statistics. The findings deliver answers to questions within the arena of future legislative actions and consumer protection activities. The analyses of databases cover areas of primary and secondary safety of LGVs with a special focus on advanced driver assistance systems (ADAS), driver behaviour as well as partner and occupant protection. Key figures from national statistics are used to highlight hotspots of accidents of LGVs in Germany. Finally, the proposed countermeasures are assessed regarding their potential effectiveness. Amongst others, the results show that the accident situation of LGVs is very similar to that of passenger cars. Noteworthy variations could be found in collisions with pedestrians, at reversing and regarding accident causes. Occupant safety of LGVs is on a higher level compared to cars. Results indicate that seatbelt use is on a significantly lower level compared to cars. This leads to higher-than-average injury risk for unbelted LGV occupants. When it comes to partner protection, there are problems with compatibility at LGVs. For car occupants there is a very high injury risk when colliding with a LGV. It indicates that higher passive safety test standards for LGVs would be counterproductive if they further increase stiffness of LGVs. The analysis of LGV-pedestrian accidents shows that pedestrian kinematic differs significantly from car-pedestrian accidents. At this point, existing pedestrian related test standards developed for cars cannot be adopted to LGVs. When it comes to active safety, ESC proved its effectiveness once again. Beyond that, rear view cameras, advanced emergency braking systems and lane departure warning systems show a safety potential, too. In addition to any technical countermeasures previously discussed, the importance of the driver behavior and attitude regarding the accident risk was investigated. In order to develop successful actions it is important to understand the main target population. In the case of LGV especially the crafts business and smaller companies are the major contributors the safety issue.
This work aims at bringing evidence for mass incompatibility in frontal impact for cars built according to the UNECE R94 regulation. French national injury accidents database census for years 2005 to 2008 were used for the analysis. The heterogeneity of frontal self-protection among cars of different masses is investigated, as well as the partner protection parameter offered by these cars. The last part of the analysis deals with the estimation of the benefit, in terms of fatal and severe injuries avoided, if crashworthiness was harmonized for the whole fleet of vehicle. This calculation is done for France and is extended to all Europe.
In most of developed countries, the progress made in passive safety during the last three decades allowed to drastically reduce the number of killed and severely injured especially for occupants of passenger cars. This reduction is mainly observed for frontal impacts for which the AIS3+ injuries has been reduced about 52% for drivers and 38% for front passengers. The stiffening of the cars' structure coupled with the generalization of airbags and the improvement of the seatbelt restraint (load limiter, pretension, etc.) allowed to protect vital body regions such as head, neck and thorax. However, the abdomen did not take advantage with so much success of this progress. The objective of this study is to draw up an inventory on the abdominal injuries of the belted car occupants involved in frontal impact, to present adapted counter-measures and to assess their potential effectiveness. In the first part the stakes corresponding to the abdominal injuries will be defined according to types of impact, seat location, occupants' age and type of injured organs. Then, we shall focus on the abdominal injury risk curves for adults involved in frontal impact and on the comparisons of the average risks according to the seat location. In the second part we will list counter-measures and we shall calculate their effectiveness. The method of case control will be used in order to estimate odds ratio, comparing two samples, given by occupants having or not having the studied safety system. For this study, two type of data sources are used: national road injured accident census and retrospective in-depth accident data collection. Abdominal injuries are mainly observed in frontal impact (52%). Fatal or severe abdominal occupant- injuries are observed at least in 27% of cases, ranking this body region as the most injured just after the thorax (51%). In spite of a twice lower occupation rate in the back seats compared to the front seats, the number of persons sustaining abdominal injuries at the rear place is higher than in the front place. In recent cars, the risk of having a serious or fatal abdominal injury in a frontal impact is 1.6% for the driver, 3.6% for the front passenger and 6.3% for the rear occupants. The most frequently hurt organs are the small intestine (17%), the spleen (16%) and the liver (13%). The most common countermeasures have a good efficiency in the reduction of the abdominal injuries for the adults: the stiffness of the structure of the seats allows decreasing the abdominal injury risk from 54% (driver) to 60% (front occupant), the seatbelt pretensioners decrease also this risk from 90% (driver) to 83% (front passenger).
In Germany averagely two million traffic accidents happen each year and emergency medical services are called to more than 400 000 patients. Even though this number is decreasing continuously (due to improvements in the fields of vehicle safety, road construction, and accident prevention) every case is yet a challenge for the rescuers and requires improvements in emergency medicine as well. Especially during diagnostics right at the accident scene, there are only limited instruments available to gain the necessary knowledge of the injuries suffered, to come to essential decisions about treatment or transport. To provide an additional diagnostic aid by scouting and estimating the situation, a software-tool calculating the likeliness of the most frequent severe injuries (AIS 3-6) of front occupants in passenger cars has been developed to deliver this necessary information about particular accident scenarios. To achieve this, logistic likelihood functions have been calculated in a multivariate regression analysis analysing all AIS 3+ injuries in the GIDAS database of the years 1999-2006 that happened more than four times
To elucidate the risk of pedestrians, bicycle and motorbike users, data of two accident research units from 1999 to 2014 were analysed in regard to demographic data, collision details, preclinical and clinical data using SPSS. 14.295 injured vulnerable road users were included. 92 out of 3610 pedestrians ("P", 2.5%), 90 out of 8307 bicyclists ("B", 1.1%) and 115 out of 4094 motorcycle users ("M", 2.8%) were diagnosed with spinal fractures. Thoracic fractures were most frequent ahead of lumbar and cervical fractures. Car collisions were most frequent mechanism (68, 62 and 36%). MAIS was 3.8, 2.8 and 3.2 for P, B and A with ISS 32, 16 and 23. AIS-head was 2.2, 1.3 and 1.5). Vulnerable road users are at significant risk for spine fractures. These are often associated with severe additional injuries, e.g. the head and a very high overall trauma severity (polytrauma).
The bicyclist accidents were analyzed to get better understanding of the occurrences and frequency of the accidents, injury distributions, as well as correlation of injury severity/outcomes with engineering and human factors in two different countries of China and Germany. The accident cases that occurred from 2001 to 2006 were collected from IVAC database in Changsha and GIDAS database in Hannover. Based on specified sampling criteria, 1,570 bicyclist cases were selected from IVAC database in Changsha, and 1806 cases were collected from Hannover, documented in GIDAS database. Statistical analyses were carried out by using these selected data. The results from the statistical analysis are presented and discussed in this study.
In Germany, in-depth accident investigations are carried out in the Hannover area since 1973. In 1999 a second region was added with surveys in Dresden and the surrounding area. Internationally, the acronym GIDAS (German In-Depth Accident Study) is commonly used for these surveys. Compared to many other countries, the sample sizes of the GIDAS surveys are much larger. The goal is to collect 1.000 accidents involving personal injuries per year and region. Data collection takes place by using a sampling procedure, which can be interpreted as a two-stage process with time intervals as primary units and accidents as secondary units. An important question is, to what extend these samples are representative for the target population from which they are drawn. Analyses show, for example, that accidents with persons killed or seriously injured are overrepresented in the samples compared to accidents with slightly injured persons. This means, that these data are subject to biases due to uncontrolled variation of sample inclusion probability. Therefore, appropriate weighting and expansion methods have to be applied in order to adjust or correct for these biases. The contribution describes the statistical and methodological principles underlying the GIDAS surveys with respect to sampling procedure, data collection and expansion. In addition, some suggestions regarding potential improvements of study design are made from a methodological point of view.
The incidence and treatment of sternal fractures among traffic accidents are of increasing importance to ensure best possible outcomes. Analysis of technical indicators of the collision, preclinical and clinical data of patients with sterna fractures from 1985-2004 among 42,055 injured patients were assessed by an Accident Research Unit. Two time groups were categorized: 1985-1994 (A) vs. 1995-2004 (B). 267/42,055 patients (0.64%) suffered a sterna fracture. Regarding the vehicle type, the majority occurred after car accidents in 0.81% (251/31,183 pts), followed by 0.19% (5/2,633pts) driving motorbike, and 0.11% (4/3,258pts) driving a truck. 91% wore a safety belt. Only 13% of all passengers suffering a sternal fracture had an airbag on board (33/255 car/trucks), with an airbag malfunction in 18%. The steering column was deformed in 39%, the steering wheel in 36%. Cars in the recent years were significantly older (7.67-±5 years (B) vs. 5.88-±5 years (A), p=0.003). Cervical spine injuries are frequent (23% vs. 22%), followed by multiple rib fractures (14% vs. 12%) and lung injuries (12% vs. 11%). We found 9/146 (6%) and 3/121 patients (3%) with heart contusion among the 267 sternal fractures. MAIS was 2.56-±1.3 vs. 2.62-±1.3 (A vs. B, p=0.349). 18% of patients were polytraumatized, with 11.2% dying at the scene, 2.3% in the hospital. Sternal fractures occur most often in old cars to seat-belted drivers often without any airbag. Severe multiple rib fractures and lung contusion are concomitant injuries in more than 10% each indicating the severity of the crash. Over a twentyyear period, the injury severity encountered was not different with 18% polytrauma patients suffering sternal fractures.
The aim of this study was to evaluate the performance and accuracy of Event Data Recorders (EDRs). The analysis was based on J-NCAP crash tests from 2006"2007, with the corresponding EDR datasets. The pre-crash velocity, maximum delta-V and delta-V versus time history data recorded in the EDRs were compared with the reliable crash test data. The difference between the EDR pre-crash velocity and the laboratory test speed was less than 4 percent. In contrast, in several cases the maximum delta-V and delta-V versus time history data obtained from the EDRs showed uncertainty of measurement in comparisons with the reliable delta-V data. The difference in maximum delta-V in these comparisons was more than 5 percent in 10 of 14 tests and more than 10 percent in 4 of 14 tests. The EDRs underestimated the maximum delta-V in almost all tests. It was also concluded that the calculated acceleration from the EDR delta-V versus time history data showed good agreement with the instrumented accelerometer signal during the collision in almost all tests.
Ein zentrales Problem für den innerstädtischen Wirtschaftsverkehr stellt die Bereitstellung von Flächen für Be- und Entladevorgänge dar. Die ausgewiesenen Ladebereiche werden häufig zugeparkt, sodass der Lieferverkehr gezwungen ist, in der zweiten Reihe zu halten. Insbesondere im Zuge von Hauptverkehrsstraßen führt das Halten in zweiter Reihe zu erheblichen Behinderungen des fließenden Verkehrs und Beeinträchtigungen der Verkehrssicherheit. Probleme für den Wirtschaftsverkehr ergeben sich teilweise auch durch ein unzureichendes Angebot an Lieferverkehrsflächen. Auch sind die Spediteure häufig nicht bereit, längere Wege in Kauf zu nehmen und die ausgewiesenen Ladebereiche zu nutzen. Für die Beschilderung von Liefer- und Ladebereichen sieht die StVO das Zeichen 286 "Eingeschränktes Haltverbot" vor. Durch entsprechende Zusatzzeichen wird die Nutzung der Verkehrsfläche für bestimmte Nutzergruppen oder für bestimmte Zeiten eingeschränkt. Ein wesentlicher Nachteil dieser Beschilderung besteht in der Definition der zugelassenen Haltvorgänge mit der Folge, dass die mit Zeichen 286 StVO gekennzeichneten Bereiche häufig als "Kurzparkplätze" fehlgenutzt werden. Angesichts dieser Problematik haben inzwischen einige deutsche Städte von der StVO abweichende Regelungen getroffen und Ladebereiche mit Zeichen 283 StVO "Haltverbot" mit entsprechenden Zusatzzeichen ausgewiesen. Zum Einsatz kommen darüber hinaus verschiedene Markierungselemente, die die Funktion der Ladezonen auch optisch verdeutlichen sollen. Ziel des Forschungsvorhabens war es, zu untersuchen, welche der bereits angewendeten Maßnahmen zur Kennzeichnung der Liefer- und Ladebereiche sich in der Praxis bewährt haben, und darauf aufbauend, Empfehlungen für ein geeignetes Instrumentarium für die StVO auszuarbeiten. Die Untersuchung hat gezeigt, dass durch eine auffällige und eindeutige Kennzeichnung der Ladebereiche, die deren Funktion durch Beschilderung und/oder Markierung unmissverständlich darstellt, die Akzeptanz der Ladebereiche erhöht werden kann. Folgende Anforderungskriterien muss eine Beschilderung erfüllen: - Die Beschilderung muss für die Verkehrsteilnehmer allgemein verständlich sein. - Entgegen der "aufgeweichten" Wirkungsweise von Zeichen 286 StVO "Eingeschränktes Haltverbot" muss aus der Beschilderung eindeutig hervorgehen, dass nur Be- und Entladevorgänge zugelassen sind. - Die Beschilderung muss implizieren, dass das Parken in Ladebereichen möglicherweise stärker sanktioniert wird. - Die Beschilderung muss eine einfache Überwachung ermöglichen. - Das Kollektiv der zugelassenen Fahrzeuge muss eingegrenzt werden können. Die Bedeutung der Markierung der Ladebereiche liegt in der optischen Verdeutlichung der zugewiesenen Funktion und hat sich in Pilotprojekten bewährt. Die Erfahrungen aus der Praxis zeigen, dass die bessere Akzeptanz der Ladezonen eher der deutlichen Kennzeichnung der Ladebereiche als der Überwachung zuzuschreiben ist. Die Überwachung muss zwar gewährleistet sein, der Aufwand kann jedoch aufgrund der guten Akzeptanz auf das "ortsübliche" Maß reduziert werden. Ein weiterer nicht zu vernachlässigender Aspekt für die Akzeptanz der Ladebereiche ist deren räumliche Anordnung und die Anpassung der Lieferzeitfenster an den örtlichen Bedarf. Als Ergebnis der Untersuchung der Praxisbeispiele wird empfohlen, ein neues Verkehrszeichen "Ladebereich" zur Kennzeichnung der Ladebereiche in Analogie zum Zeichen 229 StVO "Taxenstand" in die StVO einzuführen, das mit einem Sinnbild eines Ladevorgangs versehen sein soll. Darüber hinaus sollen zur optischen Verdeutlichung der Ladebereiche auch Markierungen in Form einer weißen Umrandung der Fläche oder unter Verwendung des Zeichens 299 StVO (Zick-Zack-Linie) zum Tragen kommen. Die Markierung der Ladebereiche soll jedoch keine zwingende Vorschrift sein, sondern von den Städten situationsabhängig eingesetzt werden können.
Small overlap frontal crashes are defined by a damage pattern with most of the vehicle deformation concentrated outboard of the main longitudinal structures. These crashes are prominent among frontal crashes resulting in serious and fatal injuries, even among vehicles that perform well in regulatory and consumer information crash tests. One of the critical aspects of understanding these crashes is knowing the crash speeds that cause the types of damage associated with serious injuries. Laboratory crash tests were conducted using 12 vehicles in three small overlap test conditions: pole, vehicle-to-vehicle collinear, and vehicle-to-vehicle oblique (15-degree striking angle). Field reconstruction techniques were used to estimate the delta V for each vehicle, and these results were compared with actual delta V values based on vehicle accelerometer data. Estimated delta Vs were 50% lower than actual values. Velocity change estimates for small overlap frontal crashes in databases such as NASS-CDS significantly underestimate actual values.
During the last 5 years, the number of cars fitted with side airbags has dramatically increased. They are now standard equipment, even on many smaller cars or less luxurious vehicles. While some side airbags offer thoracic protection alone, there are those that combine thoracic and head protection (of which most deploy from the seat). Other systems employ separate airbags for head and thorax protection, which are designed to be effective noticeably in a crash against a pole. This paper proposes an evaluation of the effectiveness of side airbags in preventing thoracic injuries to passenger car occupants involved in side crashes. First, the target population (who can take benefit of side airbag deployment and in what circumstances) is defined. Side airbags can be especially effective in cases of impacts on the door with intrusion at a certain impact speed. Then, an example case of a side impact with side airbag deployment is given were side airbag deployment is thought to have had a positive effect on injury outcome. A further case is presented where the impact configuration is likely to have reduced the effect of side airbag deployment on injury outcome. Finally, the estimation of side airbag effectiveness (in terms of additional occupant protection brought exclusively by the airbag) is proposed by comparing injury risk sustained by occupants in (more or less) similar cars (fitted or non fitted with airbags) because, during these years, car structure, and side airbag conception have considerably evolved. In-depth accident data from France, the UK and Germany has been collected. Out of 2,035 side impact accident cases available in the databases, we selected 435 occupants of passenger cars (built from 1998 onwards) involved in an injury accident between year 1998 and year 2004 for EES (Energy Equivalent Speed) values between 20km/h and 50km/h. The occupants, belted or not, were sat on the struck side, whatever the obstacle and type of accidents (intersection, loss of control, etc.). For multiple impact crashes, the side impact is assumed to be the more severe one. Passenger cars were fitted with (96) or without (339) side airbags. Most of the potential risk explanatory variables were correctly and reliably reported in the databases (velocity " impact zone " impact angle " occupant characteristics, etc.). The analysis compared injury risks for different levels of EES and different types of side airbags. A logistic regression model was also computed with injury variables (such as thoracic AIS 2+ or AIS 3+) as the dependant variable and other variables (including airbag type and EES) as explanatory injury risk factors. Results revealed statistically non-significant reductions in thoracic AIS 2+ and AIS 3+ injury risk in side airbag equipped cars in the impact violence range selected (odds ratio between 0.84 and 0.98 depending on types of airbags). The results are discussed. The non-significance is assumed to be due to a low number of cases. Statistical analysis for head injuries was not possible due to the low number of accident cases with passenger cars fitted with head airbags in the databases. Moreover, the discrepancies between the data coming from different countries (especially calculation of EES) might have introduced instability in the analysis.
The role of a national motor vehicle crash causation study-style data set in rollover data analysis
(2010)
On 1 January 2005, The National Highway Traffic Safety Administration, an agency of the United States Department of Transportation, implemented a new data collection strategy designed to assess crash avoidance technologies and report associated behavioral inputs and outcomes. The original goal was a six-year program, however, during the shortened data collection period; it proved a valuable resource for understanding a precrash environment previously obscured by forensic case investigation. Another unintended consequence was an overlap with infrastructure, roadway geometry, and design with the occupant and vehicle outcomes, by virtue of well-defined attributes. External to the collected data, supplementary information was extrapolated, by using manuals published in the United States, by the American Association of State Highway Transportation Officials and selected State Departments of Transportation, in conjunction with the National Motor Vehicle Crash Causation Study (NMVCCS). This provided a backdrop to the infrastructure framework of the rollover problem within which the occupant and vehicle outcomes were studied. If a NMVCCS-style data collection were to be implemented elsewhere, then complementary manuals produced by federal transportation officials might be consulted producing similar relationships. The current study uses NMVCCS data to describe vehicles travelling through diverse design geometries and the outcome for occupants involved in crashes within that system. Codified and extrapolated data form the basis for assessing NMVCCS and its value to the transportation safety community, as the protocols are applicable universally. The benefit in continuing a NMVCCS-style study is noted, as the interaction of roadway infrastructure and occupant protection agencies might find paths to better work together in solving the complex rollover problem using a common data-driven approach.
Auf Straßen mit - benutzungspflichtigen Radwegen, - nicht benutzungspflichtigen Radwegen, - Radfahrstreifen sowie - Schutzstreifen wurde das Unfallgeschehen sowie die Flächennutzung von fast 39.000 Radfahrern untersucht. Für jeden Anlagentyp wurde der Verkehrsablauf erfasst und Radfahrer befragt. Etwa 90 % der rechts fahrenden Radfahrer nutzen unabhängig von der Benutzungspflicht die Radwege beziehungsweise die Radfahrstreifen beziehungsweise Schutzstreifen selber. Der Anteil regelwidrig Linksfahrender liegt bei 20 % bei Radwegen und bei 10 % bei markierten Führungen. Auf Radwegen begegnen Radfahrer seltener Behinderungen durch andere Verkehrsteilnehmer als auf den Straßen mit Radfahrstreifen oder Schutzstreifen. Bei markierten Führungen gehen die meisten Behinderungen auf regelwidrig haltende Kfz zurück. Auf mehreren untersuchten Radfahrstreifen beziehungsweise Schutzstreifen kommen Radfahrer häufiger in kritische Situationen als auf Radwegen. Bei jedem Anlagentyp streuen die Unfalldichten und die Unfallraten in einem weiten Bereich. Die mittleren Unfallraten (Radfahrerunfälle bezogen auf die Radverkehrsstärke) der Straßen mit Radwegen liegen etwas höher als die der Straßen mit Radfahrstreifen und Schutzstreifen. Jeder Anlagentyp weist jedoch auch hoch unfallbelastete Abschnitte auf. Die hier untersuchten Straßen mit nicht benutzungspflichtigen Radwegen weisen nach Aufhebung der Benutzungspflicht " ebenso wie auch Straßen mit weiterhin benutzungspflichtigen Radwegen - eine niedrigere Unfalldichte als in den "Vorher"-Vergleichsjahren auf. Unabhängig von der Benutzungspflicht von Radwegen ereignen sich über 90 % der Unfälle in den Seitenbereichen. Die mittlere Unfallrate Rechtsfahrender ist bei anforderungsgerechten Radwegen niedriger als bei nicht anforderungsgerechten Radwegen und annähernd mit der Unfallrate anforderungsgerechter Radfahrstreifen vergleichbar. Ausreichenden Sichtbeziehungen zwischen der Radverkehrsanlage und Kraftfahrzeugen-Fahrstreifen sowie ausreichenden Sicherheitsräumen zu Kraftfahrzeugen-Parkständen kommt hohe Bedeutung für die Sicherheit zu. Nicht benutzungspflichtige Radwege werden vor allem wegen eines höheren subjektiven Sicherheitsempfindens oder aus Gewohnheit, aber auch aus Unkenntnis über die aufgehobene Benutzungspflicht genutzt. Typische Regelverstöße von Radfahrern sind nicht durch mangelndes Regelwissen bedingt. Stattdessen besteht sogar ein ausgeprägt deutliches Bewusstsein für Regelübertritte. Eine generelle Präferenz für einen Anlagentyp kann aufgrund der Untersuchungsergebnisse nicht getroffen werden. Ob bauliche Radwege als benutzungspflichtig ausgewiesen sind oder nicht, ist für die Unfallbelastung des Radverkehrs und für die Flächennutzung fast aller Radfahrer nicht ausschlaggebend. Die Beachtung der technischen Entwurfsempfehlungen hat maßgeblichen Einfluss auf eine niedrige Unfallbelastung. Jugendliche und erwachsene Radfahrer sollten breiter über typische Gefahrenstellen bei Unfällen mit Kraftfahrzeugen informiert werden.
Auf der Basis einer umfangreichen Literaturanalyse, die zu dem Ergebnis kommt, dass trotz einer großen Zahl häufig untersuchter Straßenparameter ein verlässliches Modell zur Geschwindigkeitsprognose noch nicht existiert, resultierte ein empirischer Untersuchungsansatz, in dem bei Versuchsfahrten das Blickverhalten und die Geschwindigkeitswahl von Versuchspersonen gleichzeitig erhoben und quantitativ erfassten Merkmalen des Straßenraums gegenübergestellt wurde. Durch die Untersuchung wurden bisherige Erkenntnisse über Gestaltungsanforderungen an Straße und Straßenumfeld durch die Zuordnungen zur Straßensituation und Geschwindigkeitsregulation bestätigt. Trotz einer starken Streuung erfasster Einzelwerte ließen sich qualitative Reaktionen zwischen den Untersuchungsbereichen Geschwindigkeit, Straßenraum und Blickverhalten feststellen, wobei korrelative Zusammenhänge jedoch kaum erkennbar wurden.
Im Rahmen einer schriftlichen Befragung konnten von rund 15.000 Schülern der Klassen 6, 8 und 10 aus den vier Landkreisen Ammerland, Holzminden, Northeim und Wesermarsch sowie aus den Städten Celle und Hannover Daten zur Verkehrs- und Unfallbeteiligung dieser Personengruppe erhoben werden. Die Befragung wurde im Schuljahr 1987/88 durchgeführt. Aufgrund des hohen Rücklaufs von 86,2 % aller angeschriebenen Schüler ergibt sich ein Befragungsumfang von 6,9 % aller Schüler der Klassen 6,8 und 10 in Niedersachsen. Die Verteilung der befragten Schüler auf die verschiedenen Schulformen spiegelt die niedersächsische Schullandschaft im Bereich der Sekundarstufe I gut wieder. Hinsichtlich der Unfallbeteiligung der Schüler wurde ermittelt, dass die amtlichen Zahlen über Verkehrsunfälle (der Polizei und der Unfallversicherungsträger) deutlich niedriger liegen als die Zahlen der von den Schülern genannten Unfälle. Ferner ist festzustellen, dass die Polizei in den städtischen Regionen wesentlich häufiger zur Unfallaufnahme hinzugezogen wird, als in den ländlich geprägten Regionen. Bezüglich der Verkehrsbeteiligung der befragten Schüler ist festzuhalten, dass sowohl die Dauer der Verkehrsbeteiligung als noch stärker die Art - das heißt die Verkehrsmittelwahl - durch das Alter, das Geschlecht, die besuchte Schulform und auch durch regionale Faktoren bestimmt werden. Diese Tatsache führte zu dem Ergebnis, dass über die Untersuchungsregionen hinausgehende generelle Aussagen zur Verkehrs- und Unfallbeteiligung kaum zu treffen seien. Effektive Unfallanalysen bedürfen der kleinräumigen Betrachtungsweise.
Ziel des Forschungsprojektes war die Erarbeitung eines webbasierten Verfahrens für die Verkehrssicherheitsarbeit, welches dem Anwender bei der Bearbeitung von Unfallhäufungen potenziell geeignete Maßnahmen in Abhängigkeit der örtlichen Randbedingungen vorschlägt, deren Sicherheitswirkung abschätzt sowie die Möglichkeit bietet, die Maßnahmenwirkung in einer retroperspektiven Betrachtung zu evaluieren. Dabei stellt das Verfahren eine Weiterentwicklung und Ergänzung des Merkblatts "Auswertung von Straßenverkehrsunfällen, Teil 2: Maßnahmen gegen Unfallhäufungen" (FGSV 2002) dar. Grundgerüst der Maßnahmensammlung bilden neben dem Merkblatt der FGSV (2002) aktuelle Erkenntnisse verschiedener Forschungsarbeiten (SPAHN 2012, GERLACH et al. 2009, MAIER et al. 2010, u. w.) zu Maßnahmen gegen Unfallhäufungen, die einer Prüfung und Kategorisierung unterzogen wurden. Der Hauptbestandteil des webbasierten Verfahrens umfasst Schritte zur Unfallanalyse, Maßnahmenfindung und Wirksamkeitsprüfung nach dem "Merkblatt zur örtlichen Unfalluntersuchung in Unfallkommissionen " M UKo" (FGSV 2012). Mit der Übermittlung der Unfallinformationen zu Unfallhäufungen aus den EDV-Systemen der Unfalldatenhaltung in das Programm ist eine spezifische Bearbeitung von Unfallhäufungen möglich. Darüber hinaus wird die Möglichkeit von Rangfolgebildungen zur zielgerichteten Priorisierung von Arbeitsprogrammen angeboten. Die Vorschläge geeigneter Maßnahmen zur Bekämpfung einer Unfallhäufung stuetzen sich im Verfahren auf die Analyse typischer Konfliktsituationen, welche aus den Unfalldatensätzen bestimmt werden. Zur Überprüfung der Angemessenheit und Durchsetzbarkeit von Maßnahmen (-paketen) steht dem Anwender eine Abschätzung des Nutzen-Kosten-Verhältnisses auf Basis des fallbezogenen Unfallgeschehens zur Verfügung. Die kontinuierliche Anwendung des Verfahrens erlaubt dem Nutzer die Dokumentation der Arbeitsschritte. Diese beinhaltet über die Umsetzungskontrolle hinaus wiederum eine fallbezogene Wirksamkeitsprüfung (Evaluierung) der realisierten Maßnahmen. Die stetige Aktualisierung der Maßnahmen und ihrer Kenngrößen (u. a. Wirkungsgrad, Kosten) stellt einen wesentlichen Bestandteil des webbasierten Verfahrens dar, um einen zielorientierten Beitrag zur Bekämpfung von Unfallhäufungen zu leisten.