Sonstige
Filtern
Erscheinungsjahr
- 2013 (99) (entfernen)
Dokumenttyp
- Konferenzveröffentlichung (51)
- Buch (Monographie) (32)
- Wissenschaftlicher Artikel (13)
- Bericht (2)
- Teil eines Buches (Kapitel) (1)
Sprache
- Englisch (54)
- Deutsch (44)
- Mehrsprachig (1)
Schlagworte
- Deutschland (74)
- Germany (73)
- Konferenz (43)
- Conference (42)
- Research report (27)
- Forschungsbericht (26)
- Injury (21)
- Reconstruction (accid) (21)
- Unfallrekonstruktion (21)
- Verletzung (21)
Rollovers continue to be a major source of heavy truck fatalities when compared to other accident modes. Real world rollover accidents are analyzed and two distinct damage patterns are identified. Damage to heavy truck roofs can occur from lateral loading that transitions to vertical roof loading as the vehicle rolls onto its side and then over onto its roof. A second load path can occur when the vehicle has rolled onto its side and furrows into the ground generating large longitudinal friction forces between the roof and ground. A review of the previous literature and various test methodologies are presented. A sled impact test methodology is presented which allows for structural assessment of a heavy truck cab's crashworthiness in both of these loading environments. Two test series are presented using the sled impact test methodology in order to analyze real world truck rollovers using varying impact platen and contact angles. The structural deformation and failure patterns were found to be consistent with damage seen in real world accident vehicles. In each case, a second equivalent truck cab was then reinforced and tested under similar conditions to evaluate the energy management and crush resistance of a stronger cab structure. These structural reinforcements demonstrated a substantial reduction in roof crush and protected the survival space of the occupant compartment. The sled impact test procedure is an effective method for testing the structural performance of a heavy truck cab in a variety of loading scenarios comparable to real world accidents and ascertaining the load and energy load levels in these accident modes.
Teil 1, Informations- und Kommunikationstechniken zur Optimierung des Betriebsdienst-Managements: In vielen Arbeits- und Organisationsprozessen des Straßenbetriebsdienstes werden Informations- und Kommunikationstechnologien (IuK-Technologien) eingesetzt, um Arbeitsabläufe einfacher, besser und sicherer zu gestalten sowie umfassende Daten für die Abrechnung und weitere Planung bereit zu stellen. Die Potenziale der IuK-Technologien werden im Straßenbetriebsdienst häufig nur unvollständig genutzt. Ziel des FE-Vorhabens war die systematische Aufbereitung von Anforderungen und Möglichkeiten der IuK-Technologien. Die Anforderungen des Straßenbetriebsdienstes an den Einsatz der IuK-Technologien berücksichtigen neben der derzeitigen Praxis auch künftige Entwicklungen, die sich beispielsweise aus der Einführung der wirtschaftlichkeitsorientierten Steuerung des Betriebsdienstes ergeben. Damit IuK-Technologien erfolgreich betrieben werden können, ist neben Funktionalität und Qualität der technischen Komponenten auch die Berücksichtigung der organisatorischen und betrieblichen Abläufe im Straßenbetriebsdienst von großer Bedeutung. In den Untersuchungen zur mobilen Sprach- und Datenkommunikation wurde deutlich, dass bei Auslaufen des Analogfunks neben dem Aufbau eigenständiger Digitalfunknetze auch die Nutzung des kommerziellen Mobilfunks in Betracht gezogen werden sollte. Wesentliche Grundlagen für die wirtschaftliche Steuerung sind die automatisierte Einsatzdatenerfassung sowie ein umfassendes Bestandsdatenmanagement, wobei Bestandsobjekte auch mit Hilfe von RFID-Chips identifiziert werden können. Im Winterdienst sollten verstärkt berührungslose Sensoren für die Erfassung von Fahrbahntemperatur und "zustand zum Einsatz kommen. Salzmanagementsysteme ermöglichen u.a. die Überwachung von Streustoffvorräten an nicht besetzten Standorten sowie eine übergeordnete Logistik bei Lieferengpässen. Wichtig sind auch Systeme zur Unterstützung der Fahrer von Winterdienstfahrzeugen, durch die Einsätze anforderungsgerechter und flexibler erfolgen können. Es wurden auch innovative IuK-Technologien analysiert, die große Potentiale für den Straßenbetriebsdienst erkennen lassen. Hierzu zählen die mobile Erfassung des Straßenzustandes für den Winterdienst durch Einsatzfahrzeuge oder Fahrzeuge des Individualverkehrs, alternative Kommunikationswege für die Warnung der Verkehrsteilnehmer vor Arbeitsstellen im Verkehrsraum sowie das autonome Fahren von Absperr- und Vorwarnanhängern, durch das die Gefährdung des Personals im Verkehrsraum deutlich reduziert werden kann. Es besteht jedoch noch erheblicher Forschungs- und Entwicklungsbedarf, um diese Technologien effizient im Straßenbetriebsdienst einzusetzen sowie ihren Nutzen umfassend bewerten zu können. Teil 2, Autonomes Fahren für den Straßenbetriebsdienst: Mitarbeiter des Betriebsdienstes sind in Arbeitsstellen auf Autobahnen enormen Unfallgefahren ausgesetzt. Weiterhin erfordert die Sicherung von Arbeitsstellen kürzerer Dauer (AkD) einen hohen personellen und zeitlichen Aufwand. Das FE-Projekt "Informations- und Kommunikationstechniken zur Optimierung des Betriebsdienst-Managements" zeigte, dass die Anwendung autonomer Fahrzeuge im Betriebsdienst die Gefährdung des Personals im Verkehrsraum reduzieren kann. In Ergänzung dazu wurde der Entwicklungsansatz "Autonomes Fahren für den Straßenbetriebsdienst" konkretisiert. Eine untersuchte Minimallösung beinhaltet ein autonom fahrendes Absperrfahrzeug, welches einem Führungsfahrzeug auf der Autobahn folgt. In einem zweiten Gesamtkonzept ist die Automatisierung einer gesamten Absicherungskolonne mit Absperr- und Vorwarnfahrzeugen incl. der unbemannten Anfahrt zur Autobahn auf nicht öffentlichen Straßen vorgesehen. In der technischen Umsetzung handelt es sich bei den Einsatzszenarien der unbemannten Fahrzeuge um Formationsfahrten oder Folgefahrt-Szenarien auf der Autobahn. Unbemannte Fahrzeuge mit den dargestellten Funktionsweisen können deutliche Sicherheitssteigerungen für Betriebsdienstmitarbeiter bieten. Eine erste Abschätzung ergab, dass rund 70 % der Mitarbeiter, welche in AkD auf Autobahnen beim Aufenthalt in Fahrzeugen verunglücken, durch den Einsatz unbemannter Arbeitsstellensicherung geschützt werden können. Dies entspricht rund der Hälfte der insgesamt bei Unfällen in AkD verunglückten Mitarbeiter. Für die Realisierung unbemannter Sicherungsfahrzeuge sind viele technische Fragestellungen zu klären, insbesondere bezüglich der Prognose und Detektion von Fehlfunktionen. Für den Einsatz der vorgeschlagenen Systeme ist eine allgemeine Genehmigung für den täglichen Betrieb notwendig. Hierzu sind zahlreiche rechtliche Fragestellungen zu beantworten. Somit kann die Implementierung unbemannter Sicherungsfahrzeuge im Betriebsdienst als Pilotprojekt für unbemanntes Fahren im Allgemeinen bzw. in anderen Branchen dienen.
Nowadays human-created systems are increasing in complexity due to the interaction of humans and technology. Especially road traffic systems are composed of multitudinous resources (e.g. personnel, vehicles, organizations, etc.), which make it even harder to anticipate the positive and negative effects on safety. One key in achieving a significant reduction of fatalities is seen in driver assistant systems counterbalancing the lack of drivers' capabilities. But the actual outcome of implementing these sophisticated technologies especially on influencing driver's capabilities are yet unknown. Latest research exemplifies an increase of reaction times of drivers in case of dysfunctional driver assistant systems. This research paper applies STAMP/STPA (STAMP = systems-theoretic accident model and processes; STPA = systems-theoretic process analysis) to the German automobile traffic system focusing on the effects of driver assistant systems on drivers. By doing so, the potential hazards caused by technology can be identified.
The strong prevalence of human error as a crash causation factor in motorcycle accidents calls for countermeasures that help tackling this issue. Advanced rider assistance systems pursue this goal, providing the riders with support and thus contributing to the prevention of crashes. However, the systems can only enhance riding safety if the riders use them. For this reason, acceptance is a decisive aspect to be considered in the development process of such systems. In order to be able to improve behavioural acceptance, the factors that influence the intention to use the system need to be identified. This paper examines the particularities of motorcycle riding and the characteristics of this user group that should be considered when predicting the acceptance of advanced rider assistance systems. Founded on theories predicting behavioural intention, the acceptance of technologies and the acceptance of driver support systems, a model on the acceptance of advanced rider assistance systems is proposed, including the perceived safety when riding without support, the interface design and the social norm as determinants of the usage intention. Since actual usage cannot be measured in the development stage of the systems, the willingness to have the system installed on the own motorcycle and the willingness to pay for the system are analyzed, constituting relevant conditions that allow for actual usage at a later stage. Its validation with the results from user tests on four advanced rider assistance systems allows confirming the social norm and the interface design as powerful predictors of the acceptance of ARAS, while the extent of perceived safety when riding without support did not have any predictive value in the present study.
The United Nations Economic Commission for Europe Informal Group on GTR No. 7 Phase 2 are working to define a build level for the BioRID II rear impact (whiplash) crash test dummy that ensures repeatable and reproducible performance in a test procedure that has been proposed for future legislation. This includes the specification of dummy hardware, as well as the development of comprehensive certification procedures for the dummy. This study evaluated whether the dummy build level and certification procedures deliver the desired level of repeatability and reproducibility. A custom-designed laboratory seat was made using the seat base, back, and head restraint from a production car seat to ensure a representative interface with the dummy. The seat back was reinforced for use in multiple tests and the recliner mechanism was replaced by an external spring-damper mechanism. A total of 65 tests were performed with 6 BioRID IIg dummies using the draft GTR No.7 sled pulse and seating procedure. All dummies were subject to the build, maintenance, and certification procedures defined by the Informal Group. The test condition was highly repeatable, with a very repeatable pulse, a well-controlled seat back response, and minimal observed degradation of seat foams. The results showed qualitatively reasonable repeatability and reproducibility for the upper torso and head accelerations, as well as for T1 Fx and upper neck Fx. However, reproducibility was not acceptable for T1 and upper neck Fz or for T1 and upper neck My. The Informal Group has not selected injury or seat assessment criteria for use with BioRID II, so it is not known whether these channels would be used in the regulation. However, the ramping-up behavior of the dummy showed poor reproducibility, which would be expected to affect the reproducibility of dummy measurements in general. Pelvis and spine characteristics were found to significantly influence the dummy measurements for which poor reproducibility was observed. It was also observed that the primary neck response in these tests was flexion, not extension. This correlates well with recent findings from Japan and the United States showing a correlation between neck flexion and injury in accident replication simulations and postmortem human subjects (PMHS) studies, respectively. The present certification tests may not adequately control front cervical spine bumper characteristics, which are important for neck flexion response. The certification sled test also does not include the pelvis and so cannot be used to control pelvis response and does not substantially load the lumbar bumpers and so does not control these parts of the dummy. The stiffness of all spine bumpers and of the pelvis flesh should be much more tightly controlled. It is recommended that a method for certifying the front cervical bumpers should be developed. Recommendations are also made for tighter tolerance on the input parameters for the existing certification tests.
Die temperierte Straße
(2013)
Eine temperierte Straße? Bei genauerer Betrachtung weist die Vision einer temperierten Fahrbahnoberfläche überzeugende Vorteile auf und ist technisch bereits heute umsetzbar, wie eine Reihe von Projekten weltweit belegt. Im Rahmen der vorgestellten Machbarkeitsstudie wurden die Möglichkeiten und Grenzen einer Fahrbahntemperierung untersucht. Unter Berücksichtigung unterschiedlicher Asphalt- und Speicherkonzepte sowie der in Deutschland vorherrschenden geologischen und klimatischen Randbedingungen erfolgte eine Auswertung der Wirksamkeit und Wirtschaftlichkeit eines energetischen Gesamtsystems aus Fahrbahn, Speicher und Gebäude. Die Studie stellt die Rahmenbedingungen für eine Realisierung einer solchen Anlage dar. In vorangegangenen Forschungsvorhaben wurde deutlich, dass sich mit einer Fahrbahnheizung, abgesehen vom volkswirtschaftlichen Nutzen, aus der gesteigerten Verkehrssicherheit nur ein geringer betriebswirtschaftlicher Nutzen aus eingesparten Winterdiensteinsätzen erzielen lässt. Im nächsten Schritt wurde daher der Nutzen einer Kühlung der Fahrbahndecke im Sommer, die sich insbesondere bei Asphaltdeckschichten als vorteilhaft erweist, in die Betrachtung einbezogen. Bei den zugehörigen thermodynamischen Simulationen zeigte sich ein erheblicher Energieüberschuss in der Jahresbilanz. Daher war es nur folgerichtig, für diese Energie mögliche Abnehmer zu suchen. Im Gegensatz zu den erst im Verlauf des Nutzungszeitraums entstehenden Einsparungen aus der Kühlung der Fahrbahnoberfläche können aus einem solchen Verkauf erneuerbarer Energie ganz konkret und kurzfristig Einnahmen generiert werden. Es zeigt sich, dass mit der ganzjährigen Klimatisierung angrenzender Gebäude zwar Einnahmen erzielt werden können, die Wirtschaftlichkeit aber durch die Kosten für die Speicherung bestimmt wird. Letztlich scheint die Umsetzung einer solchen Anlage immer dann wirtschaftlich darstellbar, wenn die geologischen, klimatischen und topografischen Rahmenbedingungen eine effiziente Speicherung der Energie zulassen.
To improve vehicle safety in frontal collisions, the crash compatibility between the colliding vehicles is crucial. Compatibility aims to improve both the self and partner protection properties of vehicles. Although compatibility has received worldwide attention for many years, no final assessment approach has been defined. Within the Frontal Impact and Compatibility Assessment Research (FIMCAR) project, different frontal impact test procedures (offset deformable barrier [ODB] test as currently used for Economic Commission for Europe [ECE] R94, progressive deformable barrier test as proposed by France for a new ECE regulation, moveable deformable barrier test as discussed worldwide, full-width rigid barrier test as used in Federal Motor Vehicle Safety Standard [FMVSS] 208, and full-width deformable barrier test) were analyzed regarding their potential for future frontal impact legislation. The research activities focused on car-to-car frontal impact accidents based on accident investigations involving newer cars. Test procedures were developed with both a crash test program and numerical simulations. The proposal from FIMCAR is to use a full-width test procedure with a deformable element and compatibility metrics in combination with the current offset test as a frontal impact assessment approach that also addresses compatibility. By adding a full-width test to the current ODB test it is possible to better address the issues of structural misalignment and injuries resulting from high acceleration accidents as observed in the current fleet. The estimated benefit ranges from a 5 to 12 percent reduction of fatalities and serious injuries resulting from frontal impact accidents. By using a deformable element in the full-width test, the test conditions are more representative of real-world situations with respect to acceleration pulse, restraint system triggering time, and deformation pattern of the front structure. The test results are therefore expected to better represent real-world performance of the tested car. Furthermore, the assessment of the structural alignment is more robust than in the rigid wall test.
With an ever rising human life expectancy the share of elderly people in society is constantly rising. This leads to the fact that at the same rate the share of people with age related diseases such as dementia and poor eyesight taking part in traffic will rise and therefore traffic accidents caused by this group of people due to the disease will play an ever greater role. This Situation will be among the future challenges of road safety work. At present this study displays specific characteristics of accidents caused by elderly car drivers (aged 65 or higher) based on the analysis of the German In-Depth Accident Study GIDAS. Herein almost 1000 elderly car drivers were identified as accident participants in the years 2008 to 2011. The focus of this study lies on identifying special types of accidents which are caused by elderly drivers and on characterizing these types with the information gathered on scene and by interviewing the participants. The main evidence analyzed is the knowledge about the accident locality, the trajectories of the participants as well as the reasons for the occurrence of the accidents. Furthermore personal information such as the personal condition before the accident and driving purposes is used to identify patterns of contributing circumstances for accidents caused by elderly traffic participants.
Immediate user self-evacuation is crucial in case of fire in road tunnels. This study investigated the effects of information with or without additional virtual reality (VR) behavioural training on self-evacuation during a simulated emergency situation in a road tunnel. Forty-three participants were randomly assigned to three groups with accumulating preventive training: The control group only filled in questionnaires, the informed group additionally read an information brochure on tunnel safety, and the VR training group received an additional behavioural training in a VR tunnel scenario. One week later, during the test session, all participants conducted a drive through a real road tunnel in which they were confronted with a collision of two vehicles and intense smoke. The informed and the behaviourally trained participants evacuated themselves more reliably from the tunnel than participants of the control group. Trained participants showed better and faster behavioural responses than informed only participants. Interestingly, the few participants in the control group who reacted adequately to the scenario were all female. A 1 year follow-up online questionnaire showed a decrease of safety knowledge, but still the trained group had somewhat more safety relevant knowledge than the two other groups. Information and especially VR behavioural training both seem promising to foster adequate self-evacuation during crisis situations in tunnels, although long term beneficial behavioural effects have to be demonstrated. Measures aiming to improve users/ behaviour should take individual difference such as gender into account.
Since 2008, the authors inspected fatal traffic accidents on the spot every year, with the cooperation of Toyota police station in Aichi pref. In the jurisdiction, numbers of fatal accidents were 18 in 2008, 12 in 2009, 14 accidents in 2010, and 16 in 2011. We here report the results of our analysis of information obtained by detailed inspection for those that occurred from 2008 to 2010. We focused on vehicle-to-pedestrian accidents, which accounted for about 45% of all accidents in 2008. Because many accidents occurred on residential roads not far from pedestrians" homes, it was revealed that the decrease of the collision speed by traffic calming such as humps and zone speed management, was highly effective. On the other hand, pedestrian detection technologies seemed to be also effective as a countermeasure on vehicle side. Every pedestrian position against a vehicle was clarified and TTC (Time to Collision) was calculated provisionally. Pedestrian accidents in intersections were also examined. Among the intersection pedestrian accidents within the jurisdiction, compared with the national average in Japan, the ratio of intersections without a signal and the ratio without a pedestrian crossing were high. According to the comparison of the Japanese traffic accident patterns between 2001 and 2008, pedestrian accidents during turning right and turning left did not decrease much. For elderly drivers, these accidents occurred very often. Finally, single vehicle accidents were analysed with the accident pattern analysis methods used above. There were high numbers of single vehicle accidents against object on single roads. Although fatal accidents against guardrails decreased, the numbers of fatal accidents against a utility pole and a sign pole were nearly constant. As for the impact with narrow width objects such as utility poles, the fatality rate was very high, and countermeasures of both road infrastructure and vehicles seem to be effective.
Various kinds of demerit point systems have been developed and implemented in European countries, aimed at tackling repeat offences in road transport by acting as a deterrent and providing sanctioning. The impact of a demerit point system on the number of crashes is often reported to be significant, but temporary. The objective of the EU BestPoint project was to establish a set of recommended practices that would result in a more effective and sustainable contribution of demerit point systems to road safety. A high actual chance of losing the licence and a high perceived chance of losing the licence are basic prerequisites for the effective operation of demerit point systems. For measures applied within the context of a demerit point system, a four-step-approach is recommended: warning letter, driver improvement course, licence withdrawal, rehabilitation course. Further recommendations concern issues like points and offences, e.g. which offences should lead to points, target groups, and the administration of demerit point systems. The final result of the EU BestPoint project is a handbook (van Schagen & Machata, 2012) which provides a concise overview of all recommended practices. The presentation/paper outlines how sustainable safety improvements can be achieved if national demerit point systems are implemented and maintained according to the recommended practices. In addition, potential further steps towards an EU-wide demerit point system (cross-border exchange on points and/or offences) are presented.
Accident research 2.0: New methods for representative evaluation of integral safety in traffic
(2013)
BMW has developed a procedure for rating Advanced Driver Assistance Systems (ADAS) benefits that integrates two distinct tools. The tool "S.A.F.E.R." is designed to analyze the pre-crash phase. The aim of S.A.F.E.R. is to simulate all relevant processes in sufficient detail to obtain reproducible estimates of key indicators (effectiveness, false positives, etc.). The relevant processes include not only traffic and vehicle dynamics, but also environmental and most importantly human factors. Representative distributions of factors and parameters are obtained by taking the stochastic variation of all relevant parameters into account in the simulations. The second tool, known as "ICOS", has been designed to provide a high-resolution, high-fidelity description of crash phase dynamics. If one converts the outputs of stochastic simulation into inputs for crash dynamics, the result is a comprehensive description of exactly how a safety system can reduce injuries. Applications currently focus on high-fidelity simulation of individual crashes in order to enhance our understanding and optimization of connected safety systems. An integrated simulation process thus allows an exact prediction of the effectiveness in individual cases in terms of injury severity. The development and rating of integral safety need to reflect the true efficiency in the field. The integrated approach described here could provide a valid and reproducible basis for rating connected systems of active and passive safety. In particular, "virtual experiments" using a traffic-based approach and incorporating models of all relevant processes constitute an essential element of the approach.
Um die Sicherheit der Straßentunnel zu gewährleisten, werden mehr als 400 m lange Tunnel ständig durch eine Tunnelleitzentrale überwacht. Die dort eingehende Flut von Einzelinformationen, wie Kamerabilder und zahlreiche Sensordaten, muss permanent durch das Personal erfasst und beurteilt werden. Das Projekt ESIMAS (Echtzeit-Sicherheits-Management-System für Straßentunnel) wird neue Wege aufzeigen, um die Leitstellenmitarbeiter zu unterstützen. Auf Grundlage der Datenanalyse und -bewertung von ESIMAS können zukünftig sicherheitsrelevante Ereignisse, wie ein Brand im Tunnel, zuverlässig und rechtzeitig erkannt werden. Im Ernstfall soll ESIMAS dem Leitzentralenpersonal sowie den Einsatz- und Rettungsdiensten Handlungsempfehlungen zur Ereignisbewältigung zur Verfügung stellen. Auf Basis dieser Handlungsempfehlungen können Maßnahmen schnellstmöglich und gezielt durchgeführt werden. Der innovative Ansatz von ESIMAS besteht in der ganzheitlichen Betrachtung aller Einzelinformationen und ihrer automatischen Auswertung und Bewertung. Hierdurch ist eine schnellere Reaktion der Leitstelle zum Schutz der Verkehrsteilnehmer möglich.
Die Bedeutung von Standards allgemein und Schnittstellenstandards in besonderem Maße sowie zugehöriger Standardisierungsprozesse hat in den letzten Jahren massiv zugenommen. Vor dem Hintergrund und den Zukunftsaufgaben von Intelligenten Verkehrssystemen (IVS) führt die Konvergenz der Branchen Telekommunikation, Medien und Informationstechnologie dazu, dass ehemals feste Grenzen zwischen der Kommunikation und Information zusehends verschwimmen. Gleichermaßen besteht in der Verkehrstelematik zunehmend Bedarf an nachhaltigen Standard-Schnittstellenlösungen zur Sicherstellung der Interoperabilität der Systeme und deren Komponenten, dies verstärkt aufgrund der Proliferation von Sensorsystemen durch zunehmende Ausstattung mit miniaturisierten Chipelementen. Analog trifft dies auch für die Automobiltechnik und deren Vernetzung in kooperativen Verkehrs- und Fahrerassistenzsystemen mittels C2X-Kommunikation zu. Die Standardisierungsforschung ist dementsprechend ein vergleichsweise noch junges Forschungsgebiet. Dies gilt sowohl für die nationale als auch internationale Ebene. Zur Bewältigung des ansteigenden Datenaufkommens bei gleichzeitig technologisch kürzer werdenden Innovationszyklen sind umso mehr effiziente Standardisierungsprozesse erforderlich, um aus übergreifendem Datenaustausch nachhaltig Nutzen für das Verkehrsmanagement schöpfen zu können. Besonders an die Akteure der Standardisierung offener Systeme der Straßenverkehrstelematik stellen sich neue Herausforderungen und Fragen hinsichtlich der Organisation eines hierfür geeigneten Standardisierungsprozesses. Die Forschungsarbeiten im FE-Projekt 63.0013/2009/BASt unterstützen die Vorbereitung der Entscheidung auf staatlicher Ebene über die zukünftige Positionierung der öffentlichen Hand bezüglich der Begleitung und Unterstützung von Standardisierungsaktivitäten offener Systeme im Sektor kommunal eingesetzter Straßenverkehrstelematik. Untersucht werden hierzu die seit Beginn in Deutschland im Jahre 1999 bisherig im Standardisierungsprozess OCIT (Open Communication Interface for Road Traffic Control Systems) und OTS (Open Traffic Systems) erzielten und künftig bei weitergehender Standardisierung zu erwartenden Nutzwirkungen und Risiken. Berücksichtigt werden in Hinblick auf den im November 2011 zur künftigen Harmonisierung der Standardisierung offener Schnittstellen gegründeten Standardisierungsverbund OCTS (Open Communication Standards for Traffic Systems) dabei die erwachsenden Einflussfaktoren und Anforderungen aus affinen Standardisierungsaktivitäten sowie EU-Richtlinien, insbesondere zu kooperativen IVS.
It is well known that most accidents with pedestrians are caused by the driver not being alert or misinterpreting the situation. For that reason advanced forward looking safety systems have a high potential to improve safety for this group of vulnerable road users. Active pedestrian protection systems combine reduction of impact speed by driver warning and/or autonomous braking with deployment of protective devices shortly before the imminent impact. According to the Euro NCAP roadmap the Autonomous Emergency Braking system tests for Pedestrians Protection will be set in force from 2016 onwards. Various projects and organisations in Europe are developing performance tests and assessment procedures as accompanying measures to the Euro NCAP initiative. To provide synthesised input to Euro NCAP so-called Harmonisation Platforms (HP-) have been established. Their main goal is to foster exchange of information on key subjects, thereby generating a clear overview of similarities and differences on the approaches chosen and, on that basis, recommend on future test procedures. In this paper activities of the Harmonisation Platform 2 on the development of Test Equipment are presented. For the testing targets that mimic humans different sensing technologies are required. A first set of specifications for pedestrian targets and the propulsion systems as collected by Harmonisation Platform 2 are presented together with a first evaluation for a number of available tools.
Zur Überwachung der Verkehrsentwicklung und zur Ermittlung der Verkehrsstärken auf den Bundesfernstraßen - Bundesautobahnen und Bundesstraßen - fand im Jahre 2010 wieder eine bundesweite Straßenverkehrszählung (SVZ 2010) im Rahmen des üblichen Fünfjahres-Turnus statt. Die Länder hatten die Möglichkeit, auch das nachgeordnete Netz (Landes- und Kreisstraßen) zu zählen und im Rahmen der SVZ 2010 auswerten zu lassen. Von dieser Möglichkeit machten nicht alle Länder Gebrauch, so dass bundesweit nur 59 % der Landesstraßen und nur 34 % der Kreisstraßen mit Zählungen abgedeckt waren. Zu diesen beiden Straßenkategorien können somit keine allgemeinen Aussagen getroffen werden. Der vorliegende Bericht beinhaltet mittlere DTV und Jahresfahrleistungen, differenziert nach Fahrzeugarten und Straßenklassen für das Bundesgebiet insgesamt und für jedes einzelne Bundesland. Außerdem sind Beschreibungen zur Berechnung der DTV- und Fahrleistungsstatistiken enthalten sowie einige Ausführungen zu Entwicklungen der mittleren DTV-Werte und Jahresfahrleistungen in Bezug auf 2005.
Zur Überwachung der Verkehrsentwicklung und zur Ermittlung der Verkehrsstärken auf den Bundesfernstraßen - Bundesautobahnen und Bundesstraßen - fand im Jahr 2010 wieder eine bundesweite Straßenverkehrszählung (SVZ 2010) im Rahmen des üblichen Fünfjahres-Turnus statt. Die Länder hatten die Möglichkeit, auch das nachgeordnete Netz (Landes- und Kreisstraßen) zu zählen und im Rahmen der SVZ 2005 auswerten zu lassen. Bundesweit war der Zählumfang auf diesen Straßen jedoch zu gering, um allgemeine, für das gesamte Bundesgebiet gültige Aussagen für diese Straßenkategorie zu treffen. Der vorliegende Bericht beinhaltet eine detaillierte Beschreibung der Erhebungs- und Hochrechnungsmethodik zur Ermittlung der durchschnittlichen täglichen Verkehrsstärken (DTV) sowie eine Darstellung der Berechnung von Kenngrößen (Bemessungsverkehrsstärken und Werte für "Lärmberechnungen", für die eine vorherige Ermittlung der DTV-Werte Voraussetzung ist. Die methodischen Erläuterungen werden ergänzt durch beispielhafte Berechnungen. Am Ende des Berichtes steht ein Vergleich mit der Straßenverkehrszählung 2005, in dem auf wesentliche Änderungen und deren Auswirkungen eingegangen wird.
Der Weg zur Schule soll für alle Kinder möglichst sicher sein. An vielen Orten gibt es auf dem Schulweg allerdings Gefahrenstellen, zum Beispiel unübersichtliche Kreuzungen, Ampeln mit langer Wartezeit oder sehr schmale Gehwege. In solchen Fällen kann ein Schulwegplan die Sicherheit der Schülerinnen und Schüler deutlich verbessern. Der Schulwegplan ist eine kartografische Darstellung des Umfelds einer Schule, die sichere Querungsstellen, Gefahrenstellen und deren Bewältigung sowie günstige Wege vom Wohnort der Kinder zur Schule aufzeigt. Schulwegpläne sind in den meisten Bundesländern nicht verbindlich vorgeschrieben. Dort, wo Schulwegpläne "empfohlen" werden oder "verbindlich" zu erstellen sind, sind konkrete Hinweise für die Art der Umsetzung in der Regel nicht verfügbar. Der Leitfaden wendet sich deshalb an Laien - Eltern, Schulen, Kommunen, Polizei und alle, die einen Schulwegplan mit vertretbarem Aufwand selbst erstellen wollen. Einleitend werden beispielhaft Schulwegpläne für Grundschulen und weiterführende Schulen vorgestellt. Um in den "Prozess Schulwegplan" einsteigen zu können, werden Informationen zur Startphase gegeben und die nötigen Bestandsaufnahmen und Analysen erläutert. Es wird dargestellt, wie hochwertige Schulwegpläne selbstständig und ohne Zusatzkosten erstellt werden können und wie anschließend eine Wirkungskontrolle zur Überprüfung der Maßnahmen durchgeführt wird. Des Weiteren werden Hinweise auf weitere Vorlagen und Materialien, die ergänzend genutzt werden können, gegeben.
The paper aims to study the injury risk and kinematics of pedestrians involved in different passenger vehicle collisions. Furthermore, the difference of pedestrian kinematics in the accidents involved minivan and sedan was analyzed. The 18 sample cases of passenger car to pedestrian collisions were selected from the database of In-depth Investigation of Vehicle Accident in Changsha of China (IVAC),of which the 12 pedestrian accidents involved in a minivan impact for each case, and the 6 accidents in a sedan impact for each. The selected cases were reconstructed by using mathematical models of pedestrians and accident vehicles in a multi-body dynamic code MADYMO environment. The logistic regression models of the risks for pedestrian AIS 3+ injuries and fatalities were developed in terms of vehicle impact speed by analyzing the minivan-pedestrian and sedan-pedestrian accidents. The difference of pedestrian kinematics was identified by comparing the results from reconstructed pedestrian accidents between the minivans and sedans collisions. The result shows that there is a significant correlation among the impact speed and the severity of pedestrian injuries. The minivan poses greater risk to pedestrian than sedan at the same impact speed. The kinematics of pedestrian was greatly influenced by vehicle front shape.
Analysis of the accident scenario of powered two-wheelers on the basis of real-world accidents
(2013)
For the first time since 20 years the German national statistics of traffic accidents revealed an increasing number of fatalities and seriously injured persons in 2011. This negative development was especially caused by increasing numbers in all groups of vulnerable road users (VRU). Furthermore, the comparison of fatality reduction rates between several categories of road users shows that persons on motorcycles show the worst performance over years. Although every second fatality in German traffic accidents is still a car occupant, users of PTW make up more than 20% in the meantime. Assuming further improvements in the field of occupant protection this trend will continue. For that reason, a study on the basis of real-world accidents was conducted to describe the accident scenario involving motorcycles and to identify the reasons of the above-described fact. Approximately 1.800 motorcycle accidents out of GIDAS database were used for the analyses. The first part of the study deals with the question how representative the GIDAS database is for the German motorcycle accident scenario. Afterwards, detailed descriptive statistics on motorcycle accidents were presented considering numerous parameters about the accident scene, environmental influences, vehicle information, individual characteristics, interview data, injury severity and injury causation. One important point is the identification of the most frequent critical situations that are typical for motorcycle accidents. Furthermore, a special focus was on accident causation. Finally, conspicuous facts out of the analysis are emphasized. All in all, the study gives a comprehensive overview about the German motorcycle accident scenario. One the one hand, the use of weighted GIDAS data allows representative and robust statements on the basis of large case numbers; on the other hand highly detailed conclusions can be drawn. The results of the study help to understand the particularities of motorcycle accidents and provide approaches for further improvements in the field of PTW safety.