Sonstige
Filtern
Erscheinungsjahr
Dokumenttyp
- Buch (Monographie) (386)
- Konferenzveröffentlichung (151)
- Bericht (15)
- Wissenschaftlicher Artikel (13)
- Arbeitspapier (7)
- Teil eines Buches (Kapitel) (3)
Schlagworte
- Germany (575) (entfernen)
Within the COST Action TU1101 the working group WG 1 is dealing with acceptance criteria and problems in helmet use while bicycling concerning conspicuity, thermal stress, ventilation deficits and other potential confounding. To analyze the helmet usage practice of bicyclists in Europe a questionnaire was developed in the scope of working group 1 to collect relevant information by means of a field study. The questionnaire consists of some 66 questions covering the fields of personal data of the cyclist, riding und helmet usage habits, information concerning the helmet model and the sensation of the helmet, as well as information on previous bicycle accidents. A second complementary study is conducted to analyze if the use of a bicycle helmet influences the seating geometry and the posture of cyclists when riding a bicycle and if the if the helmet vertically limits the vision. For this purpose cyclists with and without helmets were photographed in real world situations and relevant geometrical values such as the decline of the torso, the head posture of the upper vertical vision limit due to the helmet were established from the photos. The interim results of the field studies which were conducted in Germany by the Hannover Medical School are presented in this study. Some 227 questionnaires were filled out, of which 67 participants had used a helmet and 42 of the 227 participants have had a bicycle accident before. For the analysis of the riding position and posture of the cyclist over 40 pictures of riders with a helmet and over 240 pictures of riders without a helmet were measured concerning the seating geometry to describe the influence of using a bicycle helmet. Some results in summary: From the riders interviewed with the questionnaire only 11% of the city bike riders and 12% of the mountain bike riders always used the helmet, while 38% of the racing bike riders and 88% of the e-bike-riders always used the helmet. The helmet use seems not to change the sensation of safety of cycling compared to the use of a car. The arguments for not wearing a helmet are mostly stated to be the short distance of a trip, high temperatures or carelessness and waste of time. The reasons for using a helmet are stated to be the feeling of safety and being used to using a helmet. Being a role model for others was also stated to be a reason for helmet use. Concerning the sensation of the helmet 9% of the riders reported problems with the field of vision when using a helmet, 57% saw the problem of sweating too much, and 10% reported headaches or other unpleasant symptoms like pressure on the forehead when using the helmet. The analysis of the seating posture from the pictures taken of cyclists revealed that older cyclists generally have a riding position where the handle bar is higher than the seat (0-° to 10-° incline from seat to handlebar), while younger riders had a higher variance (between -10-° decline and 20-° incline). Further, elderly riders and riders with helmets seem to have a more upright position of the upper body when cycling. The vertical vision limit due to the helmet is determined by the front rim of the helmet (mostly the sun shade). Typical values here range from 0-° (horizontal line from the eye to the sun shade) to 75-° upwards, in which elderly riders tend to have a slightly higher vertical vision limit possibly due to the helmet being worn more towards the face.
Although the statistics show a decreasing rate of child injuries and fatalities in German road accidents more efforts can be made to protect children in cars e.g. by developing appropriate child restraint systems. An important part in of this work can be achieved with the help of crash tests using child dummies. However these crash tests cannot completely reflect the situation of real world crashes as factors like children moving out of the optimal position or children incorrectly fastened by their parents are difficult to predict. Therefore this study gives an overview over the current accident and injury situation of child occupants in cars in German road accidents.
The incidence of side impacts was investigated from GIDAS data. Both vehicle-fixed object and vehicle-vehicle collisions were analysed as these are enclosed within the consumer testing program. Vehicle-fixed object collisions were stratified according to ESC availability. Results indicated that vehicles equipped with ESC rarely have pure-lateral impacts. An increase in oblique collisions was seen for the vehicles with ESC whereby most vehicle were driving in left curves. The analysis of vehicle-vehicle collisions developed injury risk curves were developed at the AIS3+ injury severity for the vehicle-vehicle side impacts. Results suggested that greatest injury risk occurred when a Pre Euro NCAP vehicle was struck by a Post Euro-NCAP vehicle. The remaining curves did not show different behaviour, indicating that stiffness increased have been equally combated. This was attributable to the few Post Euro-NCAP vehicles that had a deployed curtain airbag available in the sample. The integration of Euro NCAP testing has shown to improve vehicle crashworthiness for pole collisions, as those vehicles with ESC rarely incur lateral impacts.
Since a number of human models have been developed it appears sensible to use these models also in the accident analysis. Especially the understanding of injury mechanisms and probably even injury risk curves can be significantly improved when interesting accidents are reconstructed using human body models. However, an important limitation for utilising human models for accident reconstruction is the effort needed to develop detailed FE models of the accident partners or to prepare the human model reconstruction by running physical accident reconstructions. The proposed approach for using human models for accident reconstruction is to use simplified and parametric car models. These models can be adapted to the crash opponents in a fast and cost effective way. Although, accuracy is less compared to detailed FE models, the relevant change in velocity can be simulated well, indicating that the computation of a detailed crash pulse is not needed. Two frontal impact test accidents that were reconstructed experimentally and using the parametric car models are indicating sufficient correlation of the adapted parametric car models with the full scale crash reconstructions. However, further developments of the parametric models to be capable for the use in lateral impacts and rear impacts are needed. For the PC Crash simulation runs the output sampling rate is too large to allow sufficient analysis. In addition the performance appears to be too general.
The current paper reports on the results of a pilot study aiming to investigate the effect of mobile telephone use on the driving performance of 5 amateur and 5 professional drivers. Their driving acuity was tested through a driving simulator. Analysis and interpretation of the results occurred comparing the drivers' driving performance while talking, reading messages and writing a message on the mobile phone (intervention time) with the drivers' driving performance engaged in no activity (control time). The variables affected by the mobile phone were the "steering", the "lane offset" and the "duration of lane offset". Moreover, the drivers involved in a car crash in the last five years appeared to differ from those who were not involved in a crash in both "lane offset" and "following distance". The results of this pilot study will inform the design of a large experimental study on 50 professional and 50 amateur drivers.
Das Ziel des Projektes war eine Bestandsaufnahme des Einsatzes computerbasierter Lehr-Lern-Medien in der Fahranfängervorbereitung und ihrer Anwendung im In- und Ausland. Darauf aufbauend sollten die Anforderungen herausgearbeitet werden, die an eine künftige umfassende Einbeziehung dieser Medien in die Fahranfängervorbereitung zu stellen sind. Zunächst wurde eine umfangreiche Recherche zu Erfassung der national und international in Anwendung befindlichen Lehr-Lern-Medien durchgeführt. Daraufhin konnte eine erste grobe Kategorisierung der Applikationen vorgenommen werden. Zudem zeigte sich, dass die Verbreitung verschiedener Produktgruppen im internationalen Vergleich stark variiert und ganz entscheidend von den jeweiligen gesetzlichen Rahmenbedingungen abhängt. Es folgte die Ableitung einer Systematisierungsgrundlage, mit Hilfe derer computergestützte Lehr-Lern-Medien detailliert betrachtet und bewertet werden können. Diese Systematisierungsgrundlage basiert in wesentlichen Teilen auf Erkenntnissen der Lehr-Lern-Forschung speziell im Bereich des E-Learning. Unter Beachtung einschlägiger Arbeiten im Bereich der Verkehrspsychologie, insbesondere zum Thema der Fahraufgabe. wurde ein starker Fokus auf den Erwerb fahraufgabenrelevanter Wissensinhalte beziehungsweise Kompetenzen gelegt. Anschließend wurden ausgewählte computerbasierte Lehr-Lern-Medien vor dem Hintergrund der zuvor erarbeiteten Systematisierungsgrundlage betrachtet und bewertet. Zudem wurden die Möglichkeiten, die sich durch die Nutzung derartiger Anwendungen ergeben, diskutiert sowie diesbezügliche Grenzen des bestehenden Systems der Fahrausbildung identifiziert. Im abschließenden Ausblick konnten Entwicklungspotentiale im Bereich der computerbasierten Lehr-Lern-Medien aufgezeigt sowie Empfehlungen zur Verbesserung der bisherigen Praxis der Fahranfängervorbereitung formuliert werden.
In order to enable foreseeing or comparing the benefit of safety systems or driver assistance systems in Germany, in the United States and in Japan, the traffic accident databases in those three countries are examined. The variables used are culpable party, collision partner, accident type, and injury level and the method to re-classify the databases for comparison are proposed. The result indicates that single passenger car fatality is the most frequent in Germany and in the United States, while passenger car vs. pedestrian is the most frequent fatality scenario in Japan. When the casualty by fatality ratio is focused, the greatest difference is observed in rear-end collisions. The ratio of slight injuries in Japan yields about eighteen times as many as those in Germany, and about eight times as many as those in the United States.
For the determination of the road surface roughness common methods have been established, like Skid Resistance Tester (SRT) or the Sideway-force Coefficient Routine Investigation Machine (SCRIM). Both methods are used to measure a comparable and reliable maximum friction potential value and to assess the quality of the road surface. However, the comparison of the measurements under real conditions and the results of measurements with SRT and SCRIM showed only minor correlations. The paper shows the comparison between these standardised methods and real vehicle braking tests and discusses the results.
In this study, we compared the injury severity of occupants according to the seating position and the crashing direction in motor vehicle accidents. In the driver's point of view, it was separated the seating position as "Near-side" and "Far-side". The study subjects were targeted by people who visited 4 regional emergency centers following motor vehicle accidents. Real-world investigation was performed by direct and indirect methods after patient- consent. The information of the damaged vehicle was informed by Collision Deformation Classification (CDC) code and the information of the injury of patients was informed by using the Abbreviated Injury Score (AIS) and Injury Severity Score (ISS). When the column 3 in CDC code was P, damaged at the middle part of lateral side, the average point of AIS 3 was 1.91-±1.72 in near-side and 1.02-±1.31 in far-side (p<0.01). The average point of maximum AIS (MAIS) was 2.78-±1.39 in near-side and 2.02-±1.11 in far-side (p<0.01). The average point of ISS was 15.74-±14.71 in near-side and 8.11-±8.39 in far-side (p<0.01). Also, when the column 3 in CDC code was D, damaged at the whole part of lateral side, it was significant that the average point of AIS 3 and MAIS in near-side was bigger than in far-side (p=0.02).
A series of drop tests and vehicle tests with the adult head impactor according to Regulation (EC) 631/2009 and drop tests with the phantom head impactor according to UN Regulation No. 43 have been carried out by the German Federal Highway Research Institute (BASt) on behalf of the German Federal Ministry of Transport, Building and Urban Development (BMVBS). Aim of the test series was to study the injury risk for vulnerable road users, especially pedestrians, in case of being impacted by a motor vehicle in a way described within the European Regulations (EC) 78/2009 and (EC) 631/2009. Furthermore, the applicability of the phantom head drop test described in UN Regulation No. 43 for plastic glazing should be investigated. In total, 30 drop tests, thereof 18 with the adult head impactor and 12 with the phantom head impactor, and 49 vehicle tests with the adult head impactor were carried out on panes of laminated safety glass (VSG), polycarbonate (PC) and laminated polycarbonate (L-PC). The influence of parameters such as the particular material properties, test point locations, fixations, ambient conditions (temperature and impact angle) was investigated in detail. In general, higher values of the Head Injury Criterion (HIC) were observed in tests on polycarbonate glazing. As the HIC is the current criterion for the assessment of head injury risk, polycarbonate glazing has to be seen as more injurious in terms of vulnerable road user protection. In addition, the significantly higher rebound of the head observed in tests with polycarbonate glazing is suspected to lead to higher neck loads and may also cause higher injury risks in secondary impacts of vulnerable road users. However, as in all tests with PC glazing no damage of the panes was observed, the risk of skin cut injuries may be expected to be reduced significantly. The performed test series give no indication for the test procedure prescribed in UN Regulation No. 43 as a methodology to approve glass windscreen not being feasible for polycarbonate glazing, as all PC panes tested fulfilled the UN R 43 requirements. The performance of the windscreen area will not be relevant for vehicle type approval according to the upcoming UN Regulation for pedestrian protection. However, it is recommended that pedestrian protection being considered for plastic windscreens to ensure at least the same level of protection as glass windscreens.
This study aimed at comparing head Wrap Around Distance (WAD) of Vulnerable Road User (VRU) obtained from the German in-depth Accident Database (GIDAS), the China in-depth Accident Database (CIDAS) and the Japanese in-depth Accident Database (ITARDA micro). Cumulative distribution of WAD of pedestrian and cyclist were obtained for each database (AIS2+) showing that WAD of cyclists were larger than the ones of pedestrians. Comparing three regions, the 50%tile WAD of GIDAS was larger than that of both Asian accident databases. Using linear regression that might predict WAD of pedestrians and cyclists from Impact speed and VRU height, WADs were calculated to be 206cm/219cm (Pedestrian/Cyclist) for GIDAS, 170cm/192cm for CIDAS and 211cm/235cm for ITARDA. In addition, this study may be helpful for reconsideration of WAD measurement alignment between accident reconstruction and test procedures.
Cycle helmets have continued to increase in popularity since their introduction half a century ago. Many studies indicate that overall, head injury can be significantly reduced by wearing them. This study was conducted using two distinct sets of real-world cycling collision data from Ireland, namely cases involving police collision reports and cases involving admission to a hospital emergency department. The analyses sought to simulate and analyse the protective performance of cycle helmets in such collision scenarios, by comparing the Head Injury Criterion score and peak head accelerations, both linear and angular. Cycle collisions were simulated using the specialised commercial software MADYMO. From the simulation results, these key metrics were compared between the same-scenario helmeted and unhelmeted cyclist models. Results showed that the inclusion of bicycle helmets reduced linear accelerations very significantly, but also increased angular accelerations significantly compared to unhelmeted situations. Given the modest protective performance of cycle helmets against angular accelerations, it is recommended that cycle helmet manufacturers and international test standards need to pay more attention to head angular accelerations.
Zielstellung der hier vorliegenden Arbeit war die Entwicklung eines Verfahrens zur Charakterisierung der akustischen Eigenschaften offenporiger Straßenbeläge in situ. Das Verfahren sollte auf indirektem Wege quantitative Aussagen über den zu erwartenden Fahrzeuggeräuschpegel LVeh nach der Methode der "Statistischen Vorbeifahrt" (DIN EN IS0 11819-1) liefern, sich unproblematisch durchführen lassen und tolerant gegenüber Störeinflüssen aus der Umgebung sein. Innerhalb der Untersuchungen wurden daher in situ Messverfahren verwendet und gegebenenfalls weiterentwickelt, bei denen davon auszugehen ist, dass sie Aussagen zum Einfluss der beiden Hauptmechanismen der lärmmindernden Wirkung offenporiger Asphalte, nämlich der Reduzierung des "Airpumping-Effekts" und der Schallabsorption im Nah- und Fernfeld vom Reifen, erlauben. Als Verfahren kamen dabei zur Anwendung: - Messung der Wasserdurchlässigkeit , - Messung und Schätzung des Strömungswiderstandes Messung des Schallabsorptionsgrades nach DIN ISO 13472, Teil 1 , - Schallausbreitungsmessungen. Diese Messverfahren sind an sieben Orten auf Bundesautobahnen eingesetzt worden. Die Ergebnisse der Messungen wurden anschließend mit nahezu zeitgleich bestimmten Fahrzeuggeräuschpegeln korreliert. Auf die Korrelation der Ergebnisse des Schätzverfahrens zur Bestimmung des Strömungswiderstands wurde dabei jedoch verzichtet, da es sich während der Untersuchungen herausstellte, dass dieses Verfahren eine nur unzureichende Genauigkeit aufweist. Als wesentliches Ergebnis der Untersuchungen zur Korrelation kann festgehalten werden, dass zur indirekten Bestimmung der lärmmindernden Wirkung von offenporigen Asphalten zwei Verfahren, die Messung des effektiven spezifischen Strömungswiderstandes R' und die Bestimmung des Schallabsorptionsgrades a, gleichberechtigt Anwendung finden müssen. Der effektive spezifische Strömungswiderstand R's soll dabei in der Rollspur des ersten Fahrstreifens gemessen werden. Die Bestimmung des Schallabsorptionsgrades a ist dagegen in der Mitte des ersten Fahrstreifens durchzuführen.
Event data recorders (EDRs) are a valuable tool for in-depth investigation of traffic accidents. EDRs are installed on the airbag control module (ACM) to record vehicle and occupant information before, during, and after a crash event. This study evaluates EDR characteristics and aims at better understanding EDR performance for the improvement of accident reconstruction with more reliable and accurate information regarding accidents. The analysis is based on six crash tests with corresponding EDR datasets.
Causation of traffic accidents with children from the perspective of all involved participants
(2017)
In the year 2014 about 2,800 children between zero and 14 years got injured due to traffic accidents in Austria. More than 50% were taking part in traffic as active road users like cyclists or pedestrians. Within this study 46 real world traffic accidents between vehicles and children as pedestrians were analysed. In 39 cases, car drivers hit the crossing children. In the other cases, the collision opponents were busses, trucks or motorcycles. Most of the children got hit while crossing a road at urban sites. By analysing the traffic accidents from the perspectives of all involved participants, vehicle drivers and injured children, it is possible to identify factors for each participant, which led to the accident and factors that contributed the accident. The main task is to find patterns in the behaviour of crash victims (children and driver) before the collision. One important fact is that in more than 50% of the analysed cases sight obstructions were an important contributing factor for both, the driver and the child. From drivers view situations in which the child moved unexpected into the driven road lane were often found. For the injured child, factors like: no attention to the road traffic or no sufficient traffic observation were found to be relevant. Further it- possible to sensitise children and adults to possible source of critical traffic situations according to the findings of this study.
Im Forschungsbericht wird das Car-Sharing, also das organisierte Teilen von Kraftfahrzeugen, in Gemeinden unter 100.000 Einwohnern betrachtet. Nach einer begrifflichen Abgrenzung der verschiedenen Formen von Mobilitätsdienstleistungen auf Basis flexibler Autonutzung werden die Konkurrenzbeziehungen zwischen den beiden bedeutendsten Mobilitätsdienstleistungen - dem Car-Sharing und der Autovermietung - untersucht. Es stellt sich heraus, dass in einzelnen Marktsegmenten eine solche besteht. Darauf folgend wird eine umfassende Marktanalyse vorgestellt. Für die kleinen Gemeinden mit weniger als 20.000 Einwohnern wurde eine schriftliche Befragung zum Thema durchgeführt, zu den mittleren Gemeinden zwischen 20.000 und 100.000 Einwohnern eine entsprechende Internetrecherche. Die Untersuchung zeigt, dass Car-Sharing in kleinen und mittleren Gemeinden im Vergleich zu den Großstädten geringer verbreitet ist. Eine Analyse der Wirtschaftlichkeit von Car-Sharing in kleinen und mittleren Gemeinden ergab, dass vor allem in den kleinen Gemeinden häufig die Rahmenbedingungen für Car-Sharing ungünstig sind. Dies betrifft vor allem die Siedlungsstruktur, welche mit abnehmender Gemeindegröße das Entstehen und Wachsen von Car-Sharing behindert. Auch der Öffentliche Personennahverkehr (ÖPNV) ist häufig mangelhaft. Weiterhin können Kostenvorteile größerer Organisationen identifiziert werden. Sie kommen vor allem in kleineren Gemeinden nur dann zum Tragen, wenn das Car-Sharing vor Ort als Filialbetrieb organisiert wird. Kostennachteile kleiner Organisationen können allerdings durch ehrenamtliche Tätigkeit zum Teil kompensiert werden. Auch das in Großstädten häufig praktizierte Eingehen von Kooperationen mit Verkehrsbetrieben kann vor allem in den kleineren Gemeinden aus Mangel an Möglichkeiten kaum praktiziert werden. Darüber hinaus gibt es bestimmte kritische Unternehmensphasen, die in kleinen und mittleren Gemeinden eine relativ große Rolle spielen. Im Rahmen von Fallstudien wurden Expertengespräche bei Vertretern von Car-Sharing-Organisationen geführt. Dabei wurden die zuvor erarbeiteten Erkenntnisse auf ihre Praxisrelevanz hin überprüft. Es zeigt sich, dass die aufgezeigten Probleme in kleinen und mittleren Gemeinden in der Praxis relevant sind. Die Fallstudien zeigen aber auch, dass auch in kleinen und mittleren Gemeinden Car-Sharing wirtschaftlich und zum Teil mit beachtlichen Nutzerzahlen betrieben werden kann. Für kleine Gemeinden sind spezielle Modelle entwickelt worden, die Car-Sharing auch mit sehr geringen Nutzerzahlen ermöglichen. Die Nutzung von Car-Sharing durch Gemeindeverwaltungen oder Firmen kann für eine bestimmte Grundauslastung der Fahrzeuge sorgen und so einen Standort sichern. Schließlich wird aufgezeigt, welche vielfältigen Möglichkeiten Gemeindeverwaltungen haben, das Car-Sharing in ihrem Gemeindegebiet zu unterstützen. Neben der eigenen Teilnahme am Car-Sharing, die auch für die Gemeindeverwaltung vorteilhaft sein kann, ist hier auch die Bereitstellung von Infrastruktur (zum Beispiel von Stellplätzen) oder die Bestellung von Car-Sharing-Leistungen in Orientierung an der Aufgabenträgerschaft des öffentlichen Personennahverkehrs denkbar. Eine Bestätigung der bis dahin gewonnenen Erkenntnisse liefert die Auswertung einer schriftlichen Befragung sämtlicher deutscher Car-Sharing-Organisationen, welche in Zusammenarbeit mit den Bearbeitern eines Parallelprojektes durchgeführt wurde (FE 77.461/2001: Bestandsaufnahme und Möglichkeiten der Weiterentwicklung des Car-Sharing). Auf der geschaffenen Wissensgrundlage werden vier Car-Sharing-Modelle dargestellt, die den besonderen Erfordernissen in kleinen und mittleren Gemeinden angepasst sind. Es handelt sich dabei um herkömmliches Car-Sharing, das sog. Einbringermodell, Car-Sharing mit Deckungsgarantie sowie privates Autoteilen auf vertraglicher Basis. Die Modelle werden im Forschungsbericht erläutert und mit Beispielen aus der Praxis belegt. Abschließend wird weiterer Forschungsbedarf aus Sicht der Projektbearbeiter aufgezeigt.
Das Ziel der vorliegenden Untersuchung zu den verkehrssicherheitsrelevanten Folgen des Cannabisgebrauchs war es, Daten zur potenziellen und tatsächlichen verkehrsbezogenen Gefährlichkeit im Hinblick auf die Fahreignung zu evaluieren. Im ersten Teil der Untersuchungen wurde durch die Düsseldorfer Arbeitsgruppe eine detaillierte Analyse der vorhandenen Forschungsliteratur zu den neuropsychologischen und psychiatrischen Effekten des Cannabiskonsums durchgeführt, die sowohl die Konsistenz eines Beeinträchtigungsnachweises als auch die Qualität der vorhandenen Studien berücksichtigt hat. Die meisten konsistent nachgewiesenen Defizite wurden dabei für die Konsumsituation des "Gelegenheitskonsumenten nach akutem Konsum" gefunden. Für abstinente oder sich in der Residualphase befindende Gelegenheitskonsumenten sind bisher keine Defizite auf Verhaltensebene konsistent nachgewiesen worden. Weiterhin wurden keine Hinweise dafür gefunden, dass bei regelmäßigen Cannabiskonsumenten nach akutem Cannabiskonsum oder während der Abstinenz mit stärkeren Verhaltensdefiziten zu rechnen ist als bei Gelegenheitskonsumenten. Diese Befunde machen eine Unterscheidung zwischen gelegentlichen und regelmäßigen Cannabiskonsumenten bezüglich der zu erwartenden Verhaltensdefizite hinfällig. Im zweiten Teil wurden durch die Heidelberger Arbeitsgruppe als Cannabinoid-positiv ermittelte Fälle aus 3 Jahren (2000—2002), die im Straßenverkehr beobachtete Auffälligkeiten zeigten, unter Berücksichtigung der gemessenen Cannabinoid-Plasmakonzentrationen betrachtet. Dabei wurde geprüft, ob und gegebenenfalls welcher Zusammenhang zwischen den analytisch ermittelten Konzentrationen an THC und seinen Metaboliten und den Auffälligkeiten, die im ärztlichen Blutentnahmeprotokoll und im polizeilichen Bericht vermerkt sind, besteht. Weder die Gesamteinschätzung der Auffälligkeiten durch die Polizei und den Blutentnahmearzt noch die Beurteilung des Beeinflussungsgrades durch den Arzt waren jeweils mit den Serumspiegeln an THC oder 11-OH-THC (Carbonsäure) korreliert. Die Ergebnisse zeigen, dass durch Einschätzungen von Polizei und Arzt weder Art und Grad der Beeinträchtigung konsistent erfasst noch Personen mit regelmäßigem und gelegentlichem Konsum sich mit der notwendigen Sicherheit voneinander trennen lassen. Welche Aspekte sich daraus in Hinblick auf die Fahreignungsdiagnostik ergeben, wird im letzten Kapitel angesprochen.
The GIDAS-investigation team of Dresden (VUFO) has documented more than 11.500 accidents since 1999. The documentation of the accident includes beside vehicle-, injury- and environmental-data very detailed reconstruction data. Within this accident investigation the VUFO began to record the skid resistance of the accident site in 2009. The measurements are divided in macro- and microroughness (Sand depth method and Portable Skid Resistance Tester-SRT-by Munro-Stanley London-©). Both methods are used to determine the skid resistance for more than 1000 passenger cars. The aim of the present study is to find out a relationship between the measured skid resistance, the road conditions and the friction coefficient, which is used to calculate the maximum accelerations and decelerations during a reconstruction of an accident. Basic approach to convert the SRT-value into the friction coefficient is the calculation of the theoretical absorbed energy of the spring rubber system of the swinging arm of lever. This absorbed energy is used to get the friction coefficient by using the equations for the work of friction. To consider the road-behavior, in correlation to the friction coefficient, the results will be merged with existing literature. Last step for this study will be a comparison between actual used friction coefficients all over the GIDAS-database and the theoretical results. The study shows, if it is possible to use the SRT-Measurement for the estimation of a friction coefficient for the reconstruction of a traffic accident. As expected, the GIDAS-Database and the additional measurement of the roughness of the road directly on the spot are an enormous useful dataset.
Um das oft komplexe Zusammenwirken von einzelnen betriebstechnischen Einrichtungen zur Detektion von Brandereignissen und Steuerung der Lüftung sowie den übrigen sicherheitstechnischen Systemen überprüfen zu können, werden nach ZTV-ING im Rahmen der Abnahme Funktionsprüfungen gefordert, indem Brände simuliert und die zu prüfenden Größen messtechnisch erfasst werden. Reale Brandversuche in Straßentunnel sind jedoch unter dem Aspekt der Wirtschaftlichkeit und des notwendigen technischen Aufwandes zur Erfassung der interessierenden Branddaten und zum Schutz der betriebstechnischen Einrichtungen sowie des Bauwerkes in der Anzahl der Szenarien wie in der Energiefreisetzung begrenzt. Die unter vertretbarem Aufwand erreichbare Brandleistung beträgt zirka 5 MW. Um dennoch Aussagen über das Verhalten des Systems bei höheren Brandleistungen und unterschiedlichen, realen Randbedingungen (Brandorte, Verkehrsbelegung, Windverhältnisse und so weiter.) zu erhalten, sollten Simulationsrechnungen durchgeführt werden können. Diese erlauben eine sehr flexible Modellierung des Tunnels und die Ermittlung sämtlicher relevanter Größen an beliebigen Punkten im Untersuchungsgebiet. Da die Randbedingungen sehr tunnelspezifisch sein können, sind zur Kalibrierung entsprechender Rechenprogramme Eingangswerte aus standardisierten Brandversuchen hilfreich. Ziel der Untersuchung war es daher, mit Hilfe eines geeigneten Rechenprogramms Anforderungen an einen Brandversuch hinsichtlich der notwendigen Daten zur Funktionsüberprüfung und zur Brandhochrechnung zu definieren. Zur Durchführung der Simulationsrechnungen wurde der "Fire Dynamics Simulator" (FDS) verwendet, der über das National Institute of Standards and Technology als 0pen Source-Rechenprogramm erhältlich ist. Grundlage des Rechenprogramms bilden die Gleichungen für die Massen-, Impuls-, Energie- und Stofferhaltung, die im 3-dimensionalen Raum numerisch gelöst werden und als Ergebnis Geschwindigkeits-, Temperatur- und Konzentrationsfelder bereitstellen. Im Rahmen dieser Untersuchung wurden verschiedene Versuchsreihen des Memorial-Tunnel-Fire-Ventilation-Test-Program (MTFVTP) zur Verifizierung der Rechenergebnisse herangezogen. Die vergleichende Gegenüberstellung der einen Brand charakterisierenden Größen Geschwindigkeit und Temperatur ergaben eine überwiegend gute Übereinstimmung der Messwerte aus den Brandversuchen mit den Simulationsergebnissen. Basierend auf den Berechnungen zu den Temperatur- und Geschwindigkeitsverteilungen wurden schließlich unter den Aspekten der Funktionsüberprüfung der betriebstechnischen Einrichtungen und der Erfassung von Eingangsgrößen für Simulationsrechnungen Anforderungen zur Versuchsanordnung, Branddauer, Brandgut und Erfassung der relevanten Messgrößen im Längs- und Querschnitt sowie Anforderungen zu Schutzvorkehrungen abgeleitet. Die Untersuchung hat gezeigt, dass die Definition "eines" Standardbrandversuchs nicht zweckmäßig ist, da die Zielsetzungen sich zu sehr unterscheiden. Dagegen konnten konkrete Grundlagen und Empfehlungen zur Festlegung standardisierter Brandversuche für die gemäß RABT und ZTV-ING vorgesehenen Funktionstests erarbeitet werden. Außerdem konnte gezeigt werden, dass das für die Simulationsrechnungen verwendete Programm FDS derzeit ein adäquates Instrument bildet, nicht nur bezüglich der Simulation von Tunnelbränden unter realen Gegebenheiten und der resultierenden Strömungs- und Temperaturverhältnissen sowie Rauchkonzentrationen, sondern auch in Bezug auf die benötigte Rechner- und Speicherkapazität.