Sonstige
Filtern
Erscheinungsjahr
- 2013 (51) (entfernen)
Dokumenttyp
- Konferenzveröffentlichung (51) (entfernen)
Schlagworte
- Deutschland (42)
- Konferenz (42)
- Conference (41)
- Germany (41)
- Reconstruction (accid) (21)
- Unfallrekonstruktion (21)
- Injury (17)
- Verletzung (17)
- On the spot accident investigation (15)
- Schweregrad (Unfall (15)
- Untersuchung am Unfallort (15)
- injury) (15)
- Verletzung) (14)
- Severity (accid (13)
- Accident (10)
- Unfall (10)
- Fatality (9)
- Simulation (9)
- Tödlicher Unfall (9)
- Datenbank (8)
- Anfahrversuch (7)
- Bewertung (7)
- Collision (7)
- Database (7)
- Evaluation (assessment) (7)
- Statistics (7)
- Statistik (7)
- Zusammenstoß (7)
- Aktives Sicherheitssystem (6)
- Analysis (math) (6)
- Driver (6)
- Driver assistance system (6)
- Fahrer (6)
- Fahrerassistenzsystem (6)
- Impact test (veh) (6)
- Safety (6)
- Sicherheit (6)
- Active safety system (5)
- Analyse (Math) (5)
- Fußgänger (5)
- Insasse (5)
- Method (5)
- Passives Sicherheitssystem (5)
- Pedestrian (5)
- Prüfverfahren (5)
- Test method (5)
- Vehicle occupant (5)
- Verfahren (5)
- Bremse (4)
- Cyclist (4)
- Europa (4)
- Europe (4)
- Fahrzeug (4)
- Motorcycle (4)
- Motorcyclist (4)
- Motorrad (4)
- Motorradfahrer (4)
- Passive safety system (4)
- Radfahrer (4)
- Vehicle (4)
- Accident prevention (3)
- Alte Leute (3)
- Automatisch (3)
- Behaviour (3)
- Brake (3)
- Cause (3)
- Child (3)
- Coefficient of friction (3)
- Efficiency (3)
- Error (3)
- Fahranfänger (3)
- Fehler (3)
- Forecast (3)
- Kind (3)
- Measurement (3)
- Messung (3)
- Old people (3)
- Prognose (3)
- Recently qualified driver (3)
- Reibungsbeiwert (3)
- Risiko (3)
- Risk (3)
- Unfallverhütung (3)
- Ursache (3)
- Verhalten (3)
- Wirbelsäule (3)
- Anthropometric dummy (2)
- Antikollisionssystem (2)
- Auffahrunfall (2)
- Automatic (2)
- Benutzung (2)
- Betonstraße (Oberbau) (2)
- Bewehrung (2)
- Braking (2)
- Bremsung (2)
- Brustkorb (2)
- Car (2)
- China (2)
- Cracking (2)
- Driver training (2)
- EU (2)
- Fahrausbildung (2)
- Fahrgeschicklichkeit (2)
- Front (2)
- Frontalzusammenstoß (2)
- Fuge (2)
- Griffigkeit (2)
- Head (2)
- Head on collision (2)
- Hospital (2)
- Improvement (2)
- India (2)
- Indien (2)
- International (2)
- Interview (2)
- Joint (structural) (2)
- Kopf (2)
- Krankenhaus (2)
- LKW (2)
- Leistungsfähigkeit (allg) (2)
- Lorry (2)
- Oberflächentextur (2)
- Overturning (veh) (2)
- PKW (2)
- Rail traffic (2)
- Reinforcement (in mater) (2)
- Richtlinien (2)
- Rigid pavement (2)
- Risikobewertung (2)
- Risk assessment (2)
- Rissbildung (2)
- Road user (2)
- Schienenverkehr (2)
- Skidding resistance (2)
- Skill (road user) (2)
- Specifications (2)
- Spinal column (2)
- Surface texture (2)
- Test (2)
- Thorax (2)
- United kingdom (2)
- Use (2)
- Vehicle regulations (2)
- Verbesserung (2)
- Vereinigtes Königreich (2)
- Verkehrsinfrastruktur (2)
- Verkehrsteilnehmer (2)
- Versuch (2)
- Vorn (2)
- Überschlagen (2)
- Abkommen von der Fahrbahn (Unfall) (1)
- Acceleration (1)
- Accident rate (1)
- Active safety system; Automatic; Brake; Car; Collision avoidance system; Conference; Driver assistance system; Germany; Impact test (veh); Rear end collision; Severity (accid (1)
- Analyse (math) (1)
- Apparatus (measuring) (1)
- Asphaltoberbau (1)
- Aufprallschlitten (1)
- Autobahn (1)
- Befreiung (Bergung) (1)
- Berechnung (1)
- Beschleunigung (1)
- Beton (1)
- Bicycle (1)
- Blasting (1)
- Brand (1)
- Bridge surfacing (1)
- Brittleness (1)
- Brückenbelag (1)
- Calculation (1)
- Clothing (1)
- Collision avoidance system (1)
- Compatibility (1)
- Concrete (1)
- Conference; Germany; Injury; Medical examination; Spinal column; X ray (1)
- Contact (tyre road) (1)
- Cost benefit analysis (1)
- Crash helmet (1)
- Czech Republic (1)
- Damping (1)
- Data bank (1)
- Decision process (1)
- Deformable barrier (impact test) (1)
- Deformation (1)
- Deformierbare Barriere (Anpralltest) (1)
- Depth (1)
- Detection (1)
- Detektion (1)
- Digital model (1)
- Dreidimensional (1)
- Drunkenness (1)
- Dummy (1)
- Dämpfung (1)
- Eigenschaft (1)
- Entscheidungsprozess (1)
- Ergonomics (1)
- Ergonomie (1)
- Erste Hilfe (1)
- Eu (1)
- Experimental road (1)
- Explosion (1)
- Extrication (1)
- Fahrrad (1)
- Fahrzeugdach (1)
- Fahrzeugsitz (1)
- Fatigue (human) (1)
- Fire (1)
- First aid (1)
- Force (1)
- Fugenfüllung (1)
- Full depth asphalt pavement (1)
- Führerschein Punktesystem (1)
- Gefahrenabwehr (1)
- Geografisches Information System (1)
- Geographical information system (1)
- Geschwindigkeit (1)
- Gravity (1)
- Grooving (1)
- Heissmischgut (1)
- Hinten (1)
- Hot coated material (1)
- Human factor (1)
- Impact sled (1)
- Installation (1)
- Interior (veh) (1)
- Japan (1)
- Joint sealing (1)
- Kleidung (1)
- Kompatibilität (1)
- Kontakt Reifen Straße (1)
- Kraft (1)
- Leistungsfähigkeit (Allg.) (1)
- Maintenance (1)
- Mathematical model (1)
- Matrix (1)
- Medizinische Untersuchung (1)
- Menschlicher Faktor (1)
- Messgerät (1)
- Modification (1)
- Montage (1)
- Motorway (1)
- Müdigkeit (1)
- Nasse Strasse (1)
- Numerisches Modell (1)
- Nutzwertanalyse (1)
- Organisation (1)
- Organization (association) (1)
- Pflasterstein (1)
- Pkw (1)
- Point demerit system (1)
- Policy (1)
- Politik (1)
- Portable (1)
- Portugal (1)
- Properties (1)
- Prototyp (1)
- Prototype (1)
- Public transport (1)
- Quality management system (1)
- Qualitätsmanagementsystem (1)
- Quer (1)
- Rail bound transport (1)
- Reaction (human) (1)
- Reaktionsverhalten (1)
- Rear (1)
- Rear end collision (1)
- Rechenmodell (1)
- Regression analysis (1)
- Regressionsanalyse (1)
- Rehabilitation (1)
- Rehabilitation (road user) (1)
- Residential area (1)
- Rillenherstellung (1)
- Road network (1)
- Road traffic (1)
- Road transport (1)
- Roof (veh) (1)
- Run off the road (accid) (1)
- Röntgenstrahlung (1)
- Schienentransport (1)
- Schlag (1)
- Schutzhelm (1)
- Schweiz (1)
- Schwerkraft (1)
- Seat (veh) (1)
- Security (1)
- Seitlicher Zusammenstoß (1)
- Sensor (1)
- Sett (1)
- Severity (acid (1)
- Shock (1)
- Side impact (1)
- Speed (1)
- Sprödigkeit (1)
- Standardisierung (1)
- Standardization (1)
- Stochastic process (1)
- Stochastischer Prozess (1)
- Straßennetz (1)
- Straßentransport (1)
- Straßenverkehr (1)
- Switzerland (1)
- Technische Vorschriften (1)
- Technische Vorschriften (Kraftfahrzeug) (1)
- Technologie (1)
- Technology (1)
- Three dimensional (1)
- Tiefe (1)
- Traffic (1)
- Traffic infrastructure (1)
- Tragbar (1)
- Transfer (phys) (1)
- Transport infrastructure (1)
- Transport operator (1)
- Transportunternehmen (1)
- Transverse (1)
- Trunkenheit (1)
- Tschechische Republik (1)
- USA (1)
- Unfallhäufigkeit (1)
- Unterhaltung (1)
- Usa (1)
- Value analysis (1)
- Veletzung) (1)
- Verformung (1)
- Verkehr (1)
- Versuchspuppe (1)
- Versuchsstrecke (1)
- Veränderung (1)
- Wasser (1)
- Water (1)
- Wet road (1)
- Wirtschaftlichkeitsrechnung (1)
- Wohngebiet (1)
- Öffentlicher Verkehr (1)
- Übertragung (phys) (1)
Institut
- Sonstige (51) (entfernen)
The main objective of EC CASPER research project is to reduce fatalities and injuries of children travelling in cars. Accidents involving children were investigated, modelling of human being and tools for dummies were advanced, a survey for the diagnosis of child safety was carried out and demands and applications were analysed. From the many research tasks of the CASPER project, the intention of this paper is to address the following: • In-depth investigation of accidents and accident reconstruction. These will provide important points for the injury risk curve, in order to improve it. Different accident investigation teams collected data from real road accidents, involving child car passengers, in five different European countries. Then, a selection of the most appropriate cases for the injury risk curve and the purposes of the project was made for an in-depth analysis. The final stage of this analysis was to conduct an accident reconstruction to validate the results obtained. The in-depth analysis included on-scene accident investigation, creating virtual simulations of the accident/possible reconstruction, and conducting the reconstruction. In the cases of successful reconstructions, new points were introduced to the injury risk curves. Accident reconstructions of selected cases were carried out in test laboratories as the next step following in-depth road accident investigation. These cases were reconstructed using similar child restraint systems (CRS) and the same type make and model as in the real accidents. Reconstructing real cases has several limitations, such as crash angle, cars" approximation paths and crash speed. However, a few changes and applications on the testing conditions were applied to reduce the limitations and improved the representations of the real accidents. After conducting the reconstructions, a comparison between the deformations of the cars on the real accident and the vehicles from the reconstructions was made. Additionally, a correlation between the data captured from the dummies and the injury data from the real accident was sought. This finalises an in-depth analysis of the accident, which will provide new relevant points to the injury risk curve. The CASPER project conducted a large research programme on child safety. On technical points, a promising research area is the developing injury risk curves as a result of in-depth accident investigations and reconstructions. This abstract was written whilst the project was not yet finished and final results are not yet known, but they will be available by the time of the conference. All the works and findings will not necessarily be integrated in the industrial versions of evaluation tools as the CASPER project is a research program.
This study analyses no.39 cases in which n.41 motorcyclists were fatally injured, or 36% of total motorcycle fatalities in Northern Ireland between 2004 and 2010 (n.114). There were n.17 cases (43.6%) where the actions of another vehicle driver caused the collision, in thirteen of these cases the motorcycles had their lights switched on. The remaining n.22 collisions (56.4%) were due to the actions of the motorcyclist. In the approach to the collision scene, there were n.13 cases (31.7%) in which the approach was a right hand bend and in n.8 (19.5%) cases, the approach was a left hand bend. In the remaining n.18 (43.9%) cases, the approach was a straight road. Of the n.17 (41.4%) motorcycles that slid after falling, n.10 (24.4%) fell onto their right side and the remaining n.7 (17.1%) fell onto their left side. The information from this study identifies primary and contributory causes of motorcycle collisions.
The increasing economics in India has an enormous growth of its road traffic. As observed from official Indian accident statistics the number of road fatalities are one of the highest worldwide. In contrast to most industrialized nations they have an rapidly increasing trend. To come along with this trend it becomes more than essential to understand the traffic accident situation. The official Indian accident statistics gives a glimpse of only basic information. Therefore more detailed data is needed. By using In-depth accident data and officially representative statistics the current accident situation can be evaluated in India, if a suitable weighting methodology is considered. Hence in 2009/2010 a pilot study with the collaboration partner JP-Research India pvt. Ldt. was gathered in Tamil Nadu in south of India. In-depth accident investigations were done around the Coimbatore area on four highways. At first, the collected data is evaluated. Due to consequent and continuous further development based on the first approach a methodology similar to NASS/CDS/GES in the US and GIDAS in Germany was developed. Of course all relevant accident related parameters including pictures and severity information were collected. As a matter of fact based on scaled sketches and reconstruction benefit analyses can be done in order to analyze the accident scenery in India. As a first outcome influence from infrastructure, missing education and vehicle safety were identified as key parameters in order to reduce the number of accidents and casualties. To compare the accident situation against international standards an accident classification for left hand traffic was developed based on the German Insurance classification system. Looking into detail additional accident types were identified and added to create an Indian accident type catalogue. The positive results encouraged several OEMs to participate in this investigation and together with BOSCH a consortium was established in 2010/11. Within one year from beginning in May 2011 about 200 highway accidents were collected, reported and reconstructed using the new standard. Hence a first good overview of the accident situation is available for the Coimbatore Tamil Nadu area. The major target for establishing accident investigations is the extension towards other states of India and urban areas to achieve a better overview of the accident scenery. Therefore local and national authorities have to be embedded in order to strengthen the awareness against traffic safety.
The misuse of CRS (child restraint system) is one of the most urgent problems in connection of child safety in cars. Numerous field studies show that more than two thirds of all CRS are used in a wrong way. This misuse could lead to serious injuries for the children. Surprisingly the quality of CRS use is coded much better in accident data (e.g. GIDAS) than the results of observatory field studies show. It is expected that misuse of CRS was not detected by the accident teams in a large number of the cases. An essential part in improving child seats and their usability is the knowledge of the relation between misuse and resulting injuries. For that the analysis and experimental reconstruction of accidents is an important part. For allowing an exact experimental accident reconstruction, it is necessary to have detailed information about the securing situation of the child and about the installation of the CRS in the car.
Rollovers continue to be a major source of heavy truck fatalities when compared to other accident modes. Real world rollover accidents are analyzed and two distinct damage patterns are identified. Damage to heavy truck roofs can occur from lateral loading that transitions to vertical roof loading as the vehicle rolls onto its side and then over onto its roof. A second load path can occur when the vehicle has rolled onto its side and furrows into the ground generating large longitudinal friction forces between the roof and ground. A review of the previous literature and various test methodologies are presented. A sled impact test methodology is presented which allows for structural assessment of a heavy truck cab's crashworthiness in both of these loading environments. Two test series are presented using the sled impact test methodology in order to analyze real world truck rollovers using varying impact platen and contact angles. The structural deformation and failure patterns were found to be consistent with damage seen in real world accident vehicles. In each case, a second equivalent truck cab was then reinforced and tested under similar conditions to evaluate the energy management and crush resistance of a stronger cab structure. These structural reinforcements demonstrated a substantial reduction in roof crush and protected the survival space of the occupant compartment. The sled impact test procedure is an effective method for testing the structural performance of a heavy truck cab in a variety of loading scenarios comparable to real world accidents and ascertaining the load and energy load levels in these accident modes.
It is well known that most accidents with pedestrians are caused by the driver not being alert or misinterpreting the situation. For that reason advanced forward looking safety systems have a high potential to improve safety for this group of vulnerable road users. Active pedestrian protection systems combine reduction of impact speed by driver warning and/or autonomous braking with deployment of protective devices shortly before the imminent impact. According to the Euro NCAP roadmap the Autonomous Emergency Braking system tests for Pedestrians Protection will be set in force from 2016 onwards. Various projects and organisations in Europe are developing performance tests and assessment procedures as accompanying measures to the Euro NCAP initiative. To provide synthesised input to Euro NCAP so-called Harmonisation Platforms (HP-) have been established. Their main goal is to foster exchange of information on key subjects, thereby generating a clear overview of similarities and differences on the approaches chosen and, on that basis, recommend on future test procedures. In this paper activities of the Harmonisation Platform 2 on the development of Test Equipment are presented. For the testing targets that mimic humans different sensing technologies are required. A first set of specifications for pedestrian targets and the propulsion systems as collected by Harmonisation Platform 2 are presented together with a first evaluation for a number of available tools.
This paper will outline ETSC's contribution to the European Union's road safety policy 2011-2020. It will present some of the main recommendations from ETSC's Blueprint for the 4th Road Safety Action Programme and will introduce the response to the European Commission's Road Safety Policy Orientations 2011-2020 (published July 2010). The second framework document presented is the Transport White Paper (published March 2011). The paper will focus on new targets and the new vision set for Europe's Road Safety policy picking out some issues in particular such as traffic law enforcement and the protection of vulnerable road users. It will argue that by reinforcing the current Road Safety Policy Orientations, the EU will be better placed to reach its new ambitious goal of halving road deaths by 2020 and the longer term zero casualty vision.
Although the number of road accident casualties in Europe (EU27) is falling the problem still remains substantial. In 2011 there were still over 30,000 road accident fatalities. Approximately half of these were car occupants and about 60 percent of these occurred in frontal impacts. The next stage to improve a car's safety performance in frontal impacts is to improve its compatibility. The objective of the FIMCAR FP7 EU-project was to develop an assessment approach suitable for regulatory application to control a car's frontal impact and compatibility crash performance and perform an associated cost benefit analysis for its implementation. This paper reports the cost benefit analyses performed to estimate the effect of the following potential changes to the frontal impact regulation: • Option 1 " No change and allow current measures to propagate throughout the vehicle fleet. • Option 2 " Add a full width test to the current offset Deformable Barrier (ODB) test. • Option 3 " Add a full width test and replace the current ODB test with a Progressive Deformable Barrier (PDB) test. For the analyses national data were used from Great Britain (STATS 19) and from Germany (German Federal Statistical Office). In addition in-depth real word crash data were used from CCIS (Great Britain) and GIDAS (Germany). To estimate the benefit a generalised linear model, an injury reduction model and a matched pairs modelling approach were applied. The benefits were estimated to be: for Option 1 "No change" about 2.0%; for Option 2 "FW test" ranging from 5 to 12% and for Option 3 "FW and PDB tests" 9 to 14% of car occupant killed and seriously injured casualties.
Do learner gain sufficient braking capabilities at the end of education for collision avoidance?
(2013)
The paper describes a test design to evaluate the braking behaviour in the course of the driver education. The results show that the braking capabilities increased during the driver education and the learning effects are the same for males and females. The evaluation limit is set to 6 m/s-². At the beginning of education, 50% of the drivers do not reach this limit, although the driver education car is equipped with an emergency brake assist, which is regularly installed in all vehicles since 2009. After the education, 100% of the drivers can reach the limit. The results are mapped to a collision avoidance scenario.
Die neuen TL/ZTV/TP Fug-StB
(2013)
Eine Betondecke kann nur so gut sein wie ihre Fugen und Fugenfüllsysteme. Funktionierende Fugen sind daher ein wesentlicher Bestandteil der Betonstraße. Nur mit funktionierendem Fugenfüllsystem kann die prognostizierte Lebensdauer einer Betondecke von mindestens 30 Jahren erreicht werden. In diesem Sinne wurden im Jahre 2001 die ZTV Fug-StB 01) eingeführt, um durch technische Vorgaben einen hohen Standard bei der Herstellung von Fugen zu gewährleisten. Aufgrund notwendiger Neuerungen, technischer Weiterentwicklung bei der Herstellung von Fugenmassen und -profilen sowie der Umsetzung der Europäischen Normen in das Deutsche Regelwerk war nach 10 Jahren nun eine Überarbeitung notwendig. Der Entwurf der neuen ZTV Fug-StB gliedert sich nach dem Kapitel "Allgemeines" in vier Teile für die unterschiedlichen Fugenfüllsysteme. Die neuen ZTV Fug-StB sind für Beton- und Asphaltflächen ebenso wie für Verkehrsflächen auf Bauwerken, Pflasterflächen, Schienenfugen und Riss-Sanierungen anwendbar. Es werden neu entwickelte Fugenkonstruktionen behandelt. Die Bedeutung funktionierender Fugen und Fugenfüllsysteme wird anhand aktueller Themen sehr deutlich. Derzeit werden verstärkt Schäden bei Fugen an neuen Betondecken, insbesondere Flankenablösungen und Versprödungen der Fugenvergussmasse beobachtet. Hier werden mögliche Schadensursachen ermittelt mit dem Ziel, über die komplexen Wirkungszusammenhänge ein Fugenfüllsystem mit Heißvergussmassen zu entwickeln, das den technischen Anforderungen an das Gesamtsystem "Betonstraße" gerecht wird.