Sonstige
Filtern
Erscheinungsjahr
- 2013 (51) (entfernen)
Dokumenttyp
- Konferenzveröffentlichung (51) (entfernen)
Schlagworte
- Deutschland (42)
- Konferenz (42)
- Conference (41)
- Germany (41)
- Reconstruction (accid) (21)
- Unfallrekonstruktion (21)
- Injury (17)
- Verletzung (17)
- On the spot accident investigation (15)
- Schweregrad (Unfall (15)
- Untersuchung am Unfallort (15)
- injury) (15)
- Verletzung) (14)
- Severity (accid (13)
- Accident (10)
- Unfall (10)
- Fatality (9)
- Simulation (9)
- Tödlicher Unfall (9)
- Datenbank (8)
- Anfahrversuch (7)
- Bewertung (7)
- Collision (7)
- Database (7)
- Evaluation (assessment) (7)
- Statistics (7)
- Statistik (7)
- Zusammenstoß (7)
- Aktives Sicherheitssystem (6)
- Analysis (math) (6)
- Driver (6)
- Driver assistance system (6)
- Fahrer (6)
- Fahrerassistenzsystem (6)
- Impact test (veh) (6)
- Safety (6)
- Sicherheit (6)
- Active safety system (5)
- Analyse (Math) (5)
- Fußgänger (5)
- Insasse (5)
- Method (5)
- Passives Sicherheitssystem (5)
- Pedestrian (5)
- Prüfverfahren (5)
- Test method (5)
- Vehicle occupant (5)
- Verfahren (5)
- Bremse (4)
- Cyclist (4)
- Europa (4)
- Europe (4)
- Fahrzeug (4)
- Motorcycle (4)
- Motorcyclist (4)
- Motorrad (4)
- Motorradfahrer (4)
- Passive safety system (4)
- Radfahrer (4)
- Vehicle (4)
- Accident prevention (3)
- Alte Leute (3)
- Automatisch (3)
- Behaviour (3)
- Brake (3)
- Cause (3)
- Child (3)
- Coefficient of friction (3)
- Efficiency (3)
- Error (3)
- Fahranfänger (3)
- Fehler (3)
- Forecast (3)
- Kind (3)
- Measurement (3)
- Messung (3)
- Old people (3)
- Prognose (3)
- Recently qualified driver (3)
- Reibungsbeiwert (3)
- Risiko (3)
- Risk (3)
- Unfallverhütung (3)
- Ursache (3)
- Verhalten (3)
- Wirbelsäule (3)
- Anthropometric dummy (2)
- Antikollisionssystem (2)
- Auffahrunfall (2)
- Automatic (2)
- Benutzung (2)
- Betonstraße (Oberbau) (2)
- Bewehrung (2)
- Braking (2)
- Bremsung (2)
- Brustkorb (2)
- Car (2)
- China (2)
- Cracking (2)
- Driver training (2)
- EU (2)
- Fahrausbildung (2)
- Fahrgeschicklichkeit (2)
- Front (2)
- Frontalzusammenstoß (2)
- Fuge (2)
- Griffigkeit (2)
- Head (2)
- Head on collision (2)
- Hospital (2)
- Improvement (2)
- India (2)
- Indien (2)
- International (2)
- Interview (2)
- Joint (structural) (2)
- Kopf (2)
- Krankenhaus (2)
- LKW (2)
- Leistungsfähigkeit (allg) (2)
- Lorry (2)
- Oberflächentextur (2)
- Overturning (veh) (2)
- PKW (2)
- Rail traffic (2)
- Reinforcement (in mater) (2)
- Richtlinien (2)
- Rigid pavement (2)
- Risikobewertung (2)
- Risk assessment (2)
- Rissbildung (2)
- Road user (2)
- Schienenverkehr (2)
- Skidding resistance (2)
- Skill (road user) (2)
- Specifications (2)
- Spinal column (2)
- Surface texture (2)
- Test (2)
- Thorax (2)
- United kingdom (2)
- Use (2)
- Vehicle regulations (2)
- Verbesserung (2)
- Vereinigtes Königreich (2)
- Verkehrsinfrastruktur (2)
- Verkehrsteilnehmer (2)
- Versuch (2)
- Vorn (2)
- Überschlagen (2)
- Abkommen von der Fahrbahn (Unfall) (1)
- Acceleration (1)
- Accident rate (1)
- Active safety system; Automatic; Brake; Car; Collision avoidance system; Conference; Driver assistance system; Germany; Impact test (veh); Rear end collision; Severity (accid (1)
- Analyse (math) (1)
- Apparatus (measuring) (1)
- Asphaltoberbau (1)
- Aufprallschlitten (1)
- Autobahn (1)
- Befreiung (Bergung) (1)
- Berechnung (1)
- Beschleunigung (1)
- Beton (1)
- Bicycle (1)
- Blasting (1)
- Brand (1)
- Bridge surfacing (1)
- Brittleness (1)
- Brückenbelag (1)
- Calculation (1)
- Clothing (1)
- Collision avoidance system (1)
- Compatibility (1)
- Concrete (1)
- Conference; Germany; Injury; Medical examination; Spinal column; X ray (1)
- Contact (tyre road) (1)
- Cost benefit analysis (1)
- Crash helmet (1)
- Czech Republic (1)
- Damping (1)
- Data bank (1)
- Decision process (1)
- Deformable barrier (impact test) (1)
- Deformation (1)
- Deformierbare Barriere (Anpralltest) (1)
- Depth (1)
- Detection (1)
- Detektion (1)
- Digital model (1)
- Dreidimensional (1)
- Drunkenness (1)
- Dummy (1)
- Dämpfung (1)
- Eigenschaft (1)
- Entscheidungsprozess (1)
- Ergonomics (1)
- Ergonomie (1)
- Erste Hilfe (1)
- Eu (1)
- Experimental road (1)
- Explosion (1)
- Extrication (1)
- Fahrrad (1)
- Fahrzeugdach (1)
- Fahrzeugsitz (1)
- Fatigue (human) (1)
- Fire (1)
- First aid (1)
- Force (1)
- Fugenfüllung (1)
- Full depth asphalt pavement (1)
- Führerschein Punktesystem (1)
- Gefahrenabwehr (1)
- Geografisches Information System (1)
- Geographical information system (1)
- Geschwindigkeit (1)
- Gravity (1)
- Grooving (1)
- Heissmischgut (1)
- Hinten (1)
- Hot coated material (1)
- Human factor (1)
- Impact sled (1)
- Installation (1)
- Interior (veh) (1)
- Japan (1)
- Joint sealing (1)
- Kleidung (1)
- Kompatibilität (1)
- Kontakt Reifen Straße (1)
- Kraft (1)
- Leistungsfähigkeit (Allg.) (1)
- Maintenance (1)
- Mathematical model (1)
- Matrix (1)
- Medizinische Untersuchung (1)
- Menschlicher Faktor (1)
- Messgerät (1)
- Modification (1)
- Montage (1)
- Motorway (1)
- Müdigkeit (1)
- Nasse Strasse (1)
- Numerisches Modell (1)
- Nutzwertanalyse (1)
- Organisation (1)
- Organization (association) (1)
- Pflasterstein (1)
- Pkw (1)
- Point demerit system (1)
- Policy (1)
- Politik (1)
- Portable (1)
- Portugal (1)
- Properties (1)
- Prototyp (1)
- Prototype (1)
- Public transport (1)
- Quality management system (1)
- Qualitätsmanagementsystem (1)
- Quer (1)
- Rail bound transport (1)
- Reaction (human) (1)
- Reaktionsverhalten (1)
- Rear (1)
- Rear end collision (1)
- Rechenmodell (1)
- Regression analysis (1)
- Regressionsanalyse (1)
- Rehabilitation (1)
- Rehabilitation (road user) (1)
- Residential area (1)
- Rillenherstellung (1)
- Road network (1)
- Road traffic (1)
- Road transport (1)
- Roof (veh) (1)
- Run off the road (accid) (1)
- Röntgenstrahlung (1)
- Schienentransport (1)
- Schlag (1)
- Schutzhelm (1)
- Schweiz (1)
- Schwerkraft (1)
- Seat (veh) (1)
- Security (1)
- Seitlicher Zusammenstoß (1)
- Sensor (1)
- Sett (1)
- Severity (acid (1)
- Shock (1)
- Side impact (1)
- Speed (1)
- Sprödigkeit (1)
- Standardisierung (1)
- Standardization (1)
- Stochastic process (1)
- Stochastischer Prozess (1)
- Straßennetz (1)
- Straßentransport (1)
- Straßenverkehr (1)
- Switzerland (1)
- Technische Vorschriften (1)
- Technische Vorschriften (Kraftfahrzeug) (1)
- Technologie (1)
- Technology (1)
- Three dimensional (1)
- Tiefe (1)
- Traffic (1)
- Traffic infrastructure (1)
- Tragbar (1)
- Transfer (phys) (1)
- Transport infrastructure (1)
- Transport operator (1)
- Transportunternehmen (1)
- Transverse (1)
- Trunkenheit (1)
- Tschechische Republik (1)
- USA (1)
- Unfallhäufigkeit (1)
- Unterhaltung (1)
- Usa (1)
- Value analysis (1)
- Veletzung) (1)
- Verformung (1)
- Verkehr (1)
- Versuchspuppe (1)
- Versuchsstrecke (1)
- Veränderung (1)
- Wasser (1)
- Water (1)
- Wet road (1)
- Wirtschaftlichkeitsrechnung (1)
- Wohngebiet (1)
- Öffentlicher Verkehr (1)
- Übertragung (phys) (1)
Institut
- Sonstige (51) (entfernen)
MANSSEN diskutiert das Generalthema des Forschungsseminars, ob sich "das straßenrechtliche Nutzungsregime" tatsächlich im Umbruch befindet und diagnostiziert eine Gewichtsverschiebung vom Straßenrecht hin zum Straßenverkehrsrecht. Das klassische Straßenrecht habe immer weniger zur Weiterentwicklung des Straßenwesens beizutragen. In diesem Zusammenhang behandelt er auch neue Verkehrskonzepte wie "Simply City" und "Shared Space". SIEGELs Beitrag über Grundrechtsgebrauch auf öffentlichen Straßen verdeutlicht anhand aktueller Beispiele die praktische Bedeutung des Straßenrechts bei der Verwirklichung von Grundrechten. Nach seiner Einschätzung verfügt das Straßenrecht insoweit nach wie vor ein adäquates Steuerungspotenzial. Etwaige Lücken könnten durch das Straßenverkehrsrecht, vor allem aber durch eine ergänzende Heranziehung des Polizeirechts geschlossen werden. Der Beitrag von ENDERLE über "Grenzüberschreitende Infrastrukturen " Planungs- und naturschutzrechtliche Besonderheiten" bezieht sein Anschauungsmaterial von dem Projekt der Fehmarnbelt-Querung. Als typische Abstimmungsprobleme bei der Planung und Genehmigung grenzüberschreitender Projekte behandelt sie namentlich die Frage der Linienbestimmung sowie grenzüberschreitende Verträglichkeitsprüfungen für FFH- und Vogelschutzgebiete. Der abschließende Beitrag von DURNER "Das Netzausbaubeschleunigungsgesetz 2011" stellt dar, dass die in diesem Gesetz geschaffene neue "Fachplanung" des Bundes teils Elemente des Raumordnungsverfahrens, teilweise jedoch auch solche der straßenrechtlichen Linienbestimmung und der standortbezogenen Raumordnungsziele aufweist. Letztlich folgt die Bundesfachplanung im Hinblick auf die Bindungswirkung im Wesentlichen dem Modell des -§ 4 ROG. Das Modell des NABEG mag für den Netzausbau sachgerecht sein, erscheint jedoch im sonstigen Infrastrukturbereich unrealistisch.
The utilisation of secondary-safety systems to protect occupants has attained a very high level over the past decades. Further improvements are still possible, but increasingly minor progress is only to be had with a high degree of effort. Thus, a key aspect must be the impact to overall safety in an accident. If reliable information is available on an imminent crash, measures already taken in the pre-crash phase can result in a significantly great influence on the outcomes of the crash. With this background preventive measures are the key to a sustainable further reduction of the figures of crash victims on our roads. This paper aims to show a preventive approach that can contribute to lessening the consequences of a crash by creating an optimum interaction of measures in the fields of primary and secondary safety. To further enhance vehicle safety, driver assistant systems are already available that warn the driver of an imminent front-to-rear-end crash. The next step is to support him in his reactions or if he fails to react sufficiently, to even initiate an automatic braking when the crash becomes unavoidable. Automatic pre-crash braking can, in an ideal situation, fully prevent a crash or can significantly reduce the impact speed and thus the impact energy (and the severity of the accident). If a vehicle is being braked in the pre-crash phase, the occupants are already being pre-stressed by the deceleration. The information available about the imminent crash can be used to activate the belt tensioners and likewise other secondary safety systems in the vehicle right before the impact. The pre-crash deceleration also causes the front of the vehicle to dip. Conventional crash tests do not take this specific impact situation into consideration. This is why, for example, the influences of the pre-crash displacements of the occupants are not recorded in the test results. Furthermore, a reproducible representation of the benefit of the vehicle safety systems which prepare the occupants for the imminent impact is not possible. In order to demonstrate the functions of automated pre-crash braking and to investigate the differences during the impact as a consequence of the altered occupant positions as well as the initiation of force and deformations of the vehicle front, DEKRA teamed up with BMW to carry out a joint crash test with the latest BMW 5 series vehicle. It involved the vehicle braking automatically from a starting test speed of 64 km/h (corresponding to the impact speed set by Euro NCAP) down to 40 km/h. The test was still run by the intelligent drive system of the crash test facility. This required several modifications to be made to the test facility as well as to the vehicle. The paper will describe and discuss some relevant results of the crash test. In addition, the possible benefits of such systems will also be considered. The test supplemented the work of the vFSS working group (vFSS stands advanced Forward-looking Safety Systems).
Cycle helmets have continued to increase in popularity since their introduction half a century ago. Many studies indicate that overall, head injury can be significantly reduced by wearing them. This study was conducted using two distinct sets of real-world cycling collision data from Ireland, namely cases involving police collision reports and cases involving admission to a hospital emergency department. The analyses sought to simulate and analyse the protective performance of cycle helmets in such collision scenarios, by comparing the Head Injury Criterion score and peak head accelerations, both linear and angular. Cycle collisions were simulated using the specialised commercial software MADYMO. From the simulation results, these key metrics were compared between the same-scenario helmeted and unhelmeted cyclist models. Results showed that the inclusion of bicycle helmets reduced linear accelerations very significantly, but also increased angular accelerations significantly compared to unhelmeted situations. Given the modest protective performance of cycle helmets against angular accelerations, it is recommended that cycle helmet manufacturers and international test standards need to pay more attention to head angular accelerations.
Introduction: The incidence of trauma-related cervical-spine fractures is 19-88 / 100.000. In contrast, the incidence of cervical spine injuries is as high as 19% - 51% of all spinal trauma. Cervical spine injuries in non-polytrauma patients are rare. However, due to the potential damage to the spinal cord these traumata are feared and mustn't be missed. Cervical spine injuries represent the highest reported early mortality rate of all spinal trauma. The rate of functional impairment afterwards is high and the rate of reintegration into work is low compared to other organ systems. In the past, trauma surgeons often did x-rays of the cervical spine with low inhibition threshold and often without strong clinical suggestion for vertebral or discoligamental injuries. This practice was queried by the Canadian C-Spine rule and extensively discussed in the past. Therefore we did a retrospective study whether non-polytrauma patients benefit from cervical spine x-rays.
The GIDAS-investigation team of Dresden (VUFO) has documented more than 11.500 accidents since 1999. The documentation of the accident includes beside vehicle-, injury- and environmental-data very detailed reconstruction data. Within this accident investigation the VUFO began to record the skid resistance of the accident site in 2009. The measurements are divided in macro- and microroughness (Sand depth method and Portable Skid Resistance Tester-SRT-by Munro-Stanley London-©). Both methods are used to determine the skid resistance for more than 1000 passenger cars. The aim of the present study is to find out a relationship between the measured skid resistance, the road conditions and the friction coefficient, which is used to calculate the maximum accelerations and decelerations during a reconstruction of an accident. Basic approach to convert the SRT-value into the friction coefficient is the calculation of the theoretical absorbed energy of the spring rubber system of the swinging arm of lever. This absorbed energy is used to get the friction coefficient by using the equations for the work of friction. To consider the road-behavior, in correlation to the friction coefficient, the results will be merged with existing literature. Last step for this study will be a comparison between actual used friction coefficients all over the GIDAS-database and the theoretical results. The study shows, if it is possible to use the SRT-Measurement for the estimation of a friction coefficient for the reconstruction of a traffic accident. As expected, the GIDAS-Database and the additional measurement of the roughness of the road directly on the spot are an enormous useful dataset.
In der Vergangenheit stiegen die Verkehrsbelastung und der Anteil des Schwerverkehrs auf deutschen Straßen und Autobahnen nahezu stetig. Dies wird sich auch in der Zukunft fortsetzen. Um auch zukünftig Mobilität gewährleisten zu können, sind Bauweisen mit maximaler Nutzungsdauer und minimalen Erhaltungsaufwendungen erforderlich. In Deutschland werden Betonfahrbahndecken als unbewehrte direkt befahrene Betonfahrbahnplatten mit Querfugen in regelmäßigen Abständen gefertigt und für Nutzungsdauern von 30 Jahren konzipiert. Die Querfugen stellen dabei den schwächsten Bereich in der Konstruktion dar. Betonfahrbahndecken können auch als Durchgehend Bewehrte Betonfahrbahndecke gefertigt werden. Dabei stellt sich ein freies Rissbild mit schmalen Plattenstreifen ein. Um eine Querkraftübertragung zu sichern, wird die Rissöffnungsweite durch die Anordnung einer durchgehenden Längsbewehrung beschränkt. Die Erfahrungen zeigen, dass mit dieser Bauweise eine längere Nutzungsdauer und ein höherer Fahrkomfort erreicht werden und weniger Erhaltungsmaßnahmen erforderlich sind. Durchgehend Bewehrte Betondecken eignen sich besonders gut für eine Asphaltüberbauung, da es keine Querfugen als Störstellen gibt. Diese Komposition hat das Potenzial für eine Nutzungsdauer von 50 Jahren und erfordert geringere Kosten, wenn man den gesamten Lebenszyklus betrachtet. Um baupraktische Erfahrungen zu sammeln, wurde im Jahr 2011 auf der Bundesautobahn (BAB) A 94 bei Forstinning in Bayern eine Versuchsstrecke eingerichtet. Diese besteht aus drei Abschnitten von je etwa 4 km Länge: Durchgehend Bewehrte Betondecke mit DSH-V-Überbauung, unbewehrte Betondecke in Plattenbauweise mit DSH-V-Überbauung und unbewehrte Betondecke in Plattenbauweise mit Grinding-Oberfläche. Erste Ergebnisse bezüglich Rissbildung, Bewegungen an den Endspornen, Haftverhalten des Blacktopping und der Schallmessungen liegen vor.
Automotive interiors have long been a potentially injurious impact area to occupants during accidents, especially in the absence of adequate padding. The U.S. Federal Motor Vehicle Safety Standard (FMVSS) 201, Occupant Protection in Interior Impact, outlines test procedures and performance criteria in order to mitigate potentially injurious head impacts to interior surfaces. FMVSS 201 specifies a finite set of impact locations and applies to passenger vehicles of a specified year range and with a gross vehicle weight rating less than 10,000 lb. In this paper, two head impact test methodologies are presented, a pendulum-test device and a Free Motion Headform (FMH) launching device, which allows for dynamic, repeatable impact evaluation of various vehicle interior surfaces and their impact attenuation abilities. The presented testing includes multiple series that evaluate the effect of differing vehicle upper interior padding on occupant head injury. One study in particular, analyzes a head impact to the side header of a heavy truck (not included in FMVSS 201) during a 90 degree rollover. Additionally, two other series of tests are presented which assess the injury reduction effect of side airbags to near side as well as far side occupants in a side impact scenario. Lastly, a forensic analysis is presented which evaluates two possible head impact locations experienced in a real world accident by analysis of the resulting interior compartment damage utilizing the FMH launching device test method. The data collected and presented includes accelerometer instrumentation and high speed video analysis. These studies demonstrate that adequate padding and airbags are very effective at mitigating head injury potential at impact speeds of 12-25 mph (19-40 kph).
The effect of fatigue on driving has been compared to the effect of alcohol impairment in both driver performance and crash studies. However are crash characteristics and causation mechanisms similar in crashes involving fatigue to those involving alcohol when studied in the real world? This has been explored by examining data held in the EC project SafetyNet Accident Causation Database. Causation data was recorded using the SafetyNet Accident Causation System (SNACS). The focus was on Cars/MPV crashes and drivers assigned the SNACS code Alcohol or Fatigue. The Alcohol group included 44 drivers and the Fatigue group included 47. "Incorrect direction" was a frequently occurring critical event in both the Alcohol and Fatigue groups. The Alcohol group had more contributory factors related to decision making and the Fatigue group had more contributory factors relating to incorrect observations. This analysis does not allow for generalised statements about the significance of the similarities and differences between crashes involving alcohol and fatigue, however the observed differences do suggest that attempts to quantify the effect of fatigue by using levels of alcohol impairment as a benchmark should be done with care.
From literature well-known analyzes on risks, hazards and causes of accidents of older drivers are amended by the present study in which a comparison of the specific features of accident causes of older car drivers (older than 60 years) and of younger car drivers (under 25 years) is conducted. Mainly the question is pursued if specific errors, mistakes and lapses are predominant in the two different age groups. The analysis system ACAS (Accident Causation Analysis System) used hereby consists of a sequential system of accident causation factors from the human, the technical and the infrastructural field, whereupon for this study the influence of the human features on the accident development in two different age groups is of interest. ACAS is both an accident model and an analysis and classification system, which describes the human participation factors of an accident and their causes in the temporal sequence (from the perceptibility to concrete action errors) taking into consideration the logical sequence of individual basic functions. In five steps (categories) of a logical and temporal sequence the hierarchical system makes human functions and processes as determinants of accident causes identifiable. The methodology specifically focuses on the use in so-called "In-Depth" and "On-Scene" investigation studies. With the help of the system for each accident participant one or more of five hypotheses of human cause factors are formed and then specified by appropriate verification criteria. These hypotheses in turn are further specified by indicators in such manner that the coding of the causation factors by a code system meets the needs of database processing and are accessible to a quantitative data analysis. The first results of the descriptive comparison of the two age groups concern mainly differences in the functional levels "information admission/perception" (where the elderly drivers have more difficulties than the young ones) and "information processing/evaluation" (where the younger drivers show more problems). Concerning the cognitive function of "planning" the group of younger drivers seems to be more often involved in an accident because of excessive speed.