Abteilung Fahrzeugtechnik
Filtern
Erscheinungsjahr
Dokumenttyp
Sprache
- Englisch (106) (entfernen)
Schlagworte
- Anfahrversuch (37)
- Safety (35)
- Impact test (veh) (34)
- Sicherheit (34)
- Bewertung (30)
- Conference (29)
- Evaluation (assessment) (29)
- Konferenz (29)
- Fahrzeug (26)
- Test method (25)
- Vehicle (25)
- Prüfverfahren (24)
- Dummy (20)
- Fußgänger (20)
- Pedestrian (20)
- Accident (19)
- Unfall (19)
- Anthropometric dummy (18)
- Verletzung (18)
- Deutschland (17)
- Frontalzusammenstoß (17)
- Germany (17)
- Injury (17)
- Collision (16)
- Head on collision (16)
- Simulation (16)
- Kompatibilität (15)
- Compatibility (14)
- Driver assistance system (14)
- Versuch (14)
- Zusammenstoß (14)
- Fahrerassistenzsystem (13)
- Test (13)
- Analyse (math) (12)
- Analysis (math) (12)
- Biomechanics (11)
- Biomechanik (11)
- Europa (11)
- Europe (11)
- Schweregrad (Unfall, Verletzung) (10)
- injury) (10)
- Car (9)
- Child (9)
- Head (9)
- Kind (9)
- Kopf (9)
- Radfahrer (9)
- Seitlicher Zusammenstoß (9)
- Severity (accid, injury) (9)
- Side impact (9)
- Technische Vorschriften (Kraftfahrzeug) (9)
- Verletzung) (9)
- Bemessung (8)
- Cyclist (8)
- Design (overall design) (8)
- Forschungsarbeit (8)
- Method (8)
- Passives Sicherheitssystem (8)
- Research project (8)
- Schweregrad (Unfall (8)
- Severity (accid (8)
- Vehicle regulations (8)
- Verfahren (8)
- Automatic (7)
- Automatisch (7)
- Driver (7)
- Fahrer (7)
- Fahrzeuginnenraum (7)
- Improvement (7)
- Insasse (7)
- Interior (veh) (7)
- Passive safety system (7)
- Standardisierung (7)
- Vehicle occupant (7)
- Verbesserung (7)
- Active safety system (6)
- Aktives Sicherheitssystem (6)
- Brustkorb (6)
- Deformierbare Barriere (Anpralltest) (6)
- Gesetzgebung (6)
- Knee (human) (6)
- Legislation (6)
- Perception (6)
- Pkw (6)
- Schlag (6)
- Shock (6)
- Thorax (6)
- Unfallverhütung (6)
- Wahrnehmung (6)
- Accident prevention (5)
- Autonomes Fahren (5)
- Autonomous driving (5)
- Behaviour (5)
- Braking (5)
- Bremsung (5)
- Cost benefit analysis (5)
- Datenbank (5)
- Deformation (5)
- Development (5)
- Driver information (5)
- Entwicklung (5)
- Fahrerinformation (5)
- Fatality (5)
- Forschungsbericht (5)
- Impact test (5)
- Lkw (5)
- Lorry (5)
- Research report (5)
- Standardization (5)
- Tödlicher Unfall (5)
- Verhalten (5)
- Wirtschaftlichkeitsrechnung (5)
- Alte Leute (4)
- Aufprallschlitten (4)
- Database (4)
- Deformable barrier (impact test) (4)
- Fahrstabilität (4)
- Impact sled (4)
- Knie (menschl) (4)
- Leg (human) (4)
- Leistungsfähigkeit (allg) (4)
- Measurement (4)
- Messung (4)
- Modification (4)
- Motorcycle (4)
- Motorrad (4)
- Prevention (4)
- Reproducibility (4)
- Reproduzierbarkeit (4)
- Statistics (4)
- Statistik (4)
- Technologie (4)
- Technology (4)
- Vehicle handling (4)
- Verformung (4)
- Airbag (3)
- Bein (menschl) (3)
- Belastung (3)
- Benutzung (3)
- Body (car) (3)
- Collision avoidance system (3)
- Communication (3)
- EU (3)
- Efficiency (3)
- Empfindlichkeit (3)
- Ergonomics (3)
- Error (3)
- Fahrzeugführung (3)
- Fahrzeugsitz (3)
- Fehler (3)
- Front (3)
- Gewicht (3)
- Halswirbel (3)
- Human body (3)
- Intelligent transport system (3)
- Karosserie (3)
- Kommunikation (3)
- Kraftfahrzeug (3)
- Lenken (Fahrzeug) (3)
- Load (3)
- Mathematical model (3)
- Menschlicher Körper (3)
- Motorcyclist (3)
- Motorradfahrer (3)
- Official approval (3)
- Old people (3)
- Reaction (human) (3)
- Reaktionsverhalten (3)
- Rechenmodell (3)
- Risiko (3)
- Risk (3)
- Safety belt (3)
- Seat (veh) (3)
- Sensitivity (3)
- Sensor (3)
- Sicherheitsgurt (3)
- Steering (process) (3)
- Straßenverkehrsrecht (3)
- Use (3)
- Veränderung (3)
- Visual display (3)
- Weight (3)
- Wirbelsäule (3)
- Abdomen (2)
- Ablenkung (psychol) (2)
- Anthropmetric dummy (2)
- Anti locking device (2)
- Antikollisionssystem (2)
- Auffahrunfall (2)
- Ausrüstung (2)
- Autonomes Fahrzeug (2)
- Autonomous vehicle (2)
- Bildschirm (2)
- Cause (2)
- Cervical vertebrae (2)
- Classification (2)
- Crash Test (2)
- Decrease (2)
- Detection (2)
- Detektion (2)
- Distraction (2)
- Driving (veh) (2)
- Emission (2)
- Equipment (2)
- Forecast (2)
- Geschwindigkeit (2)
- Haftung (jur) (2)
- Headlamp (2)
- Hospital (2)
- Intelligentes Transportsystem (2)
- Interface (2)
- International (2)
- Kamera (2)
- Klassifizierung (2)
- Knie (2)
- Krankenhaus (2)
- Kunststoff (2)
- Leuchtdichte (2)
- Liability (2)
- Luminance (2)
- Mensch Maschine Verhältnis (2)
- Messgerät (2)
- Nacht (2)
- Night (2)
- Norm (tech) (2)
- On the spot accident investigation (2)
- Organisation (2)
- Plastic material (2)
- Prognose (2)
- Prototyp (2)
- Prototype (2)
- Rear end collision (2)
- Rear view mirror (2)
- Rückspiegel (2)
- Scheinwerfer (2)
- Schutz (2)
- Severity (acid (2)
- Sichtbarkeit (2)
- Specification (standard) (2)
- Speed (2)
- Spinal column (2)
- Stress (psychol) (2)
- Traffic (2)
- Traffic regulations (2)
- Transport infrastructure (2)
- Underride protection (2)
- Unfallrekonstruktion (2)
- Unterfahrschutz (2)
- Unterleib (2)
- Untersuchung am Unfallort (2)
- Ursache (2)
- Vereinigtes Königreich (2)
- Verhütung (2)
- Verkehr (2)
- Verkehrsinfrastruktur (2)
- Verminderung (2)
- Sichtbarkeit (2)
- Vorn (2)
- Windschutzscheibe (2)
- Windscreen (veh) (2)
- Zusammenstoss (2)
- (menschl) (1)
- Ablenkung (1)
- Accessibility (1)
- Accident rate (1)
- Accident reconstruction (1)
- Achslast (1)
- Active safety (1)
- Adult (1)
- Aged people (1)
- Air bag (restraint system) (1)
- Aktive Sicherheit (1)
- Angle (1)
- Ankündigung (1)
- Anordnung (1)
- Antiblockiereinrichtung (1)
- Antiblockiersystem (1)
- Antikollisisonssystem (1)
- Apparatus (measurement) (1)
- Apparatus (measuring) (1)
- Articulated vehicle (1)
- Attention (1)
- Attitude (psychol) (1)
- Aufmerksamkeit (1)
- Augenbewegungen (1)
- Autobahn (1)
- Axle load (1)
- Battery (1)
- Bau (1)
- Baumusterzulassung (1)
- Baustelle (1)
- Beanspruchung (1)
- Bein (1)
- Benchmark (1)
- Bicycle (1)
- Bicyclist (1)
- Blind spot (veh) (1)
- Brake light (1)
- Bremslicht (1)
- Bruch (mech) (1)
- Bus (1)
- Cadaver (1)
- Calibration (1)
- Camera (1)
- Car park (1)
- Carbon dioxide (1)
- Cervical vertebrae; Conference; Evaluation (assessment); Injury; Spinal column; Test (1)
- Chassis (1)
- Compatiblity (1)
- Compression (1)
- Congestion (traffic) (1)
- Construction (1)
- Construction site (1)
- Contact (tyre road) (1)
- Correlation (math, stat) (1)
- Crashtest (1)
- Crossing the road (pedestrian) (1)
- Damage (1)
- Data acquisition (1)
- Data bank (1)
- Datenerfassung (1)
- Dauerhaftigkeit (1)
- Daylight (1)
- Decke (Straße) (1)
- Deformable barrier (Impact test) (1)
- Deformable barrier system (impact test) (1)
- Dehnungsmessstreifen (1)
- Delivery vehicle (1)
- Demografie (1)
- Demography (1)
- Detection response task (1)
- Deterioration (1)
- Diesel engine (1)
- Dieselmotor (1)
- Digital model (1)
- Dimension (1)
- Disstraction (1)
- Driver (veh) (1)
- Driver information system (1)
- Driving aptitude (1)
- Durability (1)
- Dynamic penetration test (1)
- Dynamo (1)
- EU directive (1)
- EU-Richtlinie (1)
- Echtzeit (1)
- Economic efficiency (1)
- Economics of transport (1)
- Eichung (1)
- Eigenschaft (1)
- Einstellung (psychol) (1)
- Electronic stability program (1)
- Elektronisches Stabilitätsprogramm (1)
- Emergency (1)
- Engine capacity (1)
- Ergonomie (1)
- Ersatzfahraufgabe (1)
- Erwachsener (1)
- European New Car Assessment Programme (1)
- Eye movement (1)
- Fahrassistenzsystem (1)
- Fahrbahnmarkierung (1)
- Fahrbahnüberquerung (1)
- Fahrerinformationssystem (1)
- Fahrleistung (1)
- Fahrrad (1)
- Fahrsimulator (1)
- Fahrstreifenwechsel (1)
- Fahrtauglichkeit (1)
- Fahrwerk (1)
- Fahrzeugbeleuchtung (1)
- Failure (1)
- Feuer (1)
- Finite element method (1)
- Fire (1)
- Foot (not a measure) (1)
- Form (1)
- Frau (1)
- Freight transport (1)
- Frequency (1)
- Frequenz (1)
- Fuel consumption (1)
- Future transport mode (1)
- Fuß (1)
- Gelenkfahrzeug (1)
- Grenzfläche (1)
- Grenzwert (1)
- Güterverkehr (1)
- Harmonization (1)
- Head (human) (1)
- Height (1)
- Herstellung (1)
- Hinten (1)
- Hubraum (1)
- Höhe (1)
- Hüfte (menschl) (1)
- Impact study (1)
- In Bewegung (1)
- Increase (1)
- Intelligentes Verkehrssystem (1)
- Intersection (1)
- Kleintransporter (1)
- Knotenpunkt (1)
- Kognitive Aufgabenanforderung (1)
- Kohlendioxid (1)
- Kompatiblität (1)
- Kontakt Reifen Straße (1)
- Kontrolle (1)
- Kopf (menschl) (1)
- Korrelation (math, stat) (1)
- Kraftstoffverbrauch (1)
- Laborexperiment (1)
- Landstraße (1)
- Lane changing (1)
- Layout (1)
- Leichnam (1)
- Limit (1)
- Location (1)
- Lärm (1)
- Man-machine interface (1)
- Manufacture (1)
- Market (1)
- Markt (1)
- Materialveränderung (allg) (1)
- Medical examination (1)
- Medizinische Untersuchung (1)
- Mensch-Maschine-Schnittstelle (1)
- Methode der finiten Elemente (1)
- Motorway (1)
- Moving (1)
- Nasse Straße (1)
- Noise (1)
- Notfall (1)
- Numerisches Modell (1)
- Oberfläche (1)
- Oberflächentextur (1)
- Optimum (1)
- Optische Anzeige (1)
- Organization (1)
- Organization (association) (1)
- Ort (Position) (1)
- Overlapping (1)
- Parkfläche (1)
- Pelvis (1)
- Pfahl (1)
- Pile (1)
- Productivity (1)
- Properties (1)
- Prüefverfahren (1)
- Public transport (1)
- Radio (1)
- Rammsondierung (1)
- Real time (1)
- Rear (1)
- Reconstruction (accid) (1)
- Reflectorized material (1)
- Reflexstoffe (1)
- Reifen (1)
- Richtlinien (1)
- Rippe (menschl) (1)
- Road marking (1)
- Robot (1)
- Roboter (1)
- Rundfunk (1)
- Rural road (1)
- Sachschaden (1)
- Safety fence (1)
- Safety glass (1)
- Schallpegel (1)
- Schnittstelle (1)
- Schulter (1)
- Schutzeinrichtung (1)
- Schweregrad /Unfall (1)
- Seite (1)
- Shape (1)
- Shoulder (human) (1)
- Sicherheitsglas (1)
- Side (1)
- Simulator (driving) (1)
- Size and weight regulations (1)
- Social factors (1)
- Sociology (1)
- Sound level (1)
- Soziale Faktoren (1)
- Soziologie (1)
- Spain (1)
- Spanien (1)
- Specification (standard ) (1)
- Specifications (1)
- Spectrum (1)
- Spektrum (1)
- Stadardization (1)
- Stadt (1)
- Stand der Technik (Bericht) (1)
- Standard (1)
- State of the art report (1)
- Steifigkeit (1)
- Stiffness (1)
- Strain gauge (1)
- Stress (1)
- Stress (psycho) (1)
- Surface (1)
- Surface texture (1)
- Surfacing (1)
- Surrogate driving set-up (1)
- Surveillance (1)
- Tactile perception (1)
- Tageslicht (1)
- Taktiles Signal (1)
- Telecommunication (1)
- Telekommunikation (1)
- Telematics (1)
- Telematik (1)
- Toter Winkel (1)
- Toxicity (1)
- Toxizität (1)
- Tracking task (1)
- Trackingaufgabe (1)
- Traffic control (1)
- Traffic regulation (1)
- Train (1)
- Typenzulassung (1)
- Tyre (1)
- USA (1)
- Unfallhäufigkeit (1)
- United Kingdom (1)
- United kingdom (1)
- Urban area (1)
- Vehicle lighting (1)
- Vehicle mile (1)
- Vehicle regulation (1)
- Veraenderung (1)
- Vergrößerung (1)
- Verkehrsstauung (1)
- Verkehrssteuerung (1)
- Verkehrswirtschaft (1)
- Vibration (1)
- Video camera (1)
- Vorne (1)
- Warning (1)
- Weather (1)
- Wet road (1)
- Winkel (1)
- Wirkungsanalyse (1)
- Wirtschaftlichkeit (1)
- Witterung (1)
- Woman (1)
- Zug (Eisenbahn) (1)
- Zugänglichkeit (1)
- Zukünftiges Verkehrsmittel (1)
- Zulassung (tech) (1)
- Zusammendrückung (1)
- Öffentlicher Verkehr (1)
- Überdeckung (1)
Institut
For the assessment of vehicle safety in frontal collisions compatibility (which consists of self and partner protection) between opponents is crucial. Although compatibility has been analysed worldwide for over 10 years, no final assessment approach has been defined to date. Taking into account the European Enhanced Vehicle safety Committee (EEVC) compatibility and the final report to the steering committee on frontal impact [Faerber 2007] and the FP5 VC-COMPAT[Edwards 2007] project activities, two test approaches were identified as the most promising candidates for the assessment of compatibility. Both are composed of an off-set and a full overlap test procedure. In addition another procedure (a test with a moving deformable barrier) is getting more attention in current research programmes. The overall objective of the FIMCAR project is to complete the development of the candidate test procedures and propose a set of test procedures suitable for regulatory application to assess and control a vehicle- frontal impact and compatibility crash safety. In addition an associated cost benefit analysis will be performed. In the FIMCAR Deliverable D 3.1 [Adolph 2013] the development and assessment of criteria and associated performance limits for the full width test procedure were reported. In this Deliverable D3.2 analyses of the test data (full width tests, car-to-car tests and component tests), further development and validation of the full width assessment protocol and development of the load cell and load cell wall specification are reported. The FIMCAR full-width assessment procedure consists of a 50 km/h test against the Full Width Deformable Barrier (FWDB). The Load Cell Wall behind the deformable element assesses whether or not important Energy Absorbing Structures are within the Common Interaction Zone as defined based on the US part 581 zone. The metric evaluates the row forces and requires that the forces directly above and below the centre line of the Common Interaction Zone exceed a minimum threshold. Analysis of the load spreading showed that metrics that rely on sum forces of rows and columns are within acceptable tolerances. Furthermore it was concluded that the Repeatability and Reproducibility of the FWDB test is acceptable. The FWDB test was shown to be capable to detect lower load paths that are beneficial in car-to-car impacts.
In the European Project FIMCAR, a proposal for a frontal impact test configuration was developed which included an additional full width deformable barrier (FWDB) test. Motivation for the deformable element was partly to measure structural forces as well as to produce a severe crash pulse different from that in the offset test. The objective of this study was to analyze the safety performance of vehicles in the full width rigid barrier test (FWRB) and in the full width deformable barrier test (FWDB). In total, 12 vehicles were crashed in both configurations. Comparison of these tests to real world accident data was used to identify the crash barrier most representative of real world crashes. For all vehicles, the airbag visible times were later in the FWDB configuration. This was attributed to the attenuation of the initial acceleration peak, observed in FWRB tests, by the addition of the deformable element. These findings were in alignment with airbag triggering times seen in real world crash data. Also, the dummy loadings were slightly worse in FWDB compared to FWRB tests, which is possibly linked to the airbag firing and a more realistic loading of the vehicle crash structures in the FWDB configuration. Evaluations of the lower extremities have shown a general increasing of the tibia index with the crash pulse severity.
This paper presents findings of a laboratory experiment which aimed at evaluating the sensitivity and intrusiveness of Tactile Detection Response Task (TDRT) methodology. Various single-task, dual-task and triple-task scenarios were compared. The task scenarios included a surrogate of driving (tracking task) and different secondary tasks (N-back, surrogate reference task (SuRT)). The results suggest that the TDRT is sensitive to load levels of secondary tasks which primarily demand for cognitive resources (N-back). Sensitivity to variations of visual"manual load could not be shown (SuRT). TDRT seems also to be able to differentiate between modes of primary task which varies in terms of cognitive load (visual against auditory tracking task). Results indicated intrusiveness of TDRT on primary task performance and secondary task performance depending on the type of underlying task scenario. As a conclusion, TDRT can be recommended as a method to assess attentional effects of cognitive load of a secondary task, but should be used with caution for secondary tasks with strong motor demands.
The project UR:BAN "Cognitive assistance (KA)" aims at developing future assistance systems providing improved performance in complex city traffic. New state-of-the-art panoramic sensor technologies now allow comprehensive monitoring and evaluation of the vehicle environment. In order to improve protection of vulnerable road users such as pedestrians and cyclists, a particular objective of UR:BAN is the evaluation and prediction of their behaviour and actions. The objective of subproject "WER" is development support by providing quantitative estimates of traffic collisions at the very start and predict potential in terms of optimized accident avoidance and reduction of injury severity. For this purpose an integrated computer simulation toolkit is being devised based on real world accidents (GIDAS as well as video documented accidents), allowing the prediction of potential effectiveness and future benefit of assistance systems in this accident scenario. Subsequently, this toolkit may be used for optimizing the design of implemented assistance systems for improved effectiveness.
Established in 1997, the European New Car Assessment Programme (Euro NCAP) provides consumers with a safety performance assessment for the majority of the most popular cars in Europe. Thanks to its rigorous crash tests, Euro NCAP has rapidly become an important driver safety improvement to new cars. After ten years of rating vehicles, Euro NCAP felt that a change was necessary to stay in tune with rapidly emerging driver assistance and crash avoidance systems and to respond to shifting priorities in road safety. A new overall rating system was introduced that combines the most important aspects of vehicle safety under a single star rating. The overall rating system has allowed Euro NCAP to continue to push for better fitment and higher performance for vehicles sold on the European market. In the coming years, the safety rating is expected to play an important role in the support of the roll-out of highly automated vehicles.
Estimation of the effects of new emission standards on motorcycle emissions by means of modeling
(2016)
Road traffic is, in addition to the energy sector and the industry, one main source of air pollution and carbon dioxide emissions. Although most countries and manufacturers agreed to environmental regulations to reduce the pollutant emissions, particularly in urban areas with high traffic density, the impact of road traffic emissions on the environment and human health has been growing in importance steadily. Due to stricter emission standards and the binding use of emission-reducing systems (e.g. three-way catalyst) hydrocarbon emissions from passenger cars have been reduced significantly since the last two decades. Unlike to passenger cars the emissions standards of powered two-wheelers have not been adjusted since 2006 although their share of hydrocarbon emissions to the total amount of hydrocarbon emissions of road traffic is estimated to be disproportionately high. Due to the new regulation (EU) No. 168/2013 powered two-wheelers have to fulfill new emission standards from 2016 (Euro 4) and 2020 (Euro 5) onwards. Besides new limits for the tailpipe emissions the evaporative emissions are regulated separately for the first time, as they make up a high proportion to the total hydrocarbon emissions in this vehicle class. In this context, the calculation and forecast of road traffic emissions is an important tool to verify compliance of climate targets and to assess the reduction potential of emission-reducing systems. For that purpose the Federal Highway Research Institute (BASt) uses the emission- and calculation tool TREMOD (Transport Emission Model) which provides baseline data and calculated results for pollutants in almost every differentiation e.g. vehicle category, traffic situation and road type. Moreover, estimations of future emission trends, stock information and mileage distribution can be made. The main objective is to illustrate the impact of the upcoming emission standards Euro 4 and Euro 5 on the operational hydrocarbon emissions of powered two-wheelers based on statistical estimations. The significant aspect is to generate scenarios to show the reduction potential of hydrocarbon emissions of powered two-wheelers, differentiated into motorcycles and small motorcycles, in relation to the total share of hydrocarbon emissions in this vehicle class and to the total hydrocarbon emissions from road traffic. As a part of their research, the authors can make initial statements about the possible effect of the new emission standards of regulation (EU) No. 168/2013 by means of modeling with TREMOD.
There is considerable evidence for the negative effects of driver distraction on road safety. In many experimental studies, drivers have been primarily viewed as passive receivers of distraction. Thus, there is a lack of research on the mediating role of their self-regulatory behavior. The aim of the current study was to compare drivers' performance when engaged in a system-paced secondary task with a self-paced version of this task and how both differed from baseline driving performance without distraction. Thirty-nine participants drove in a simulator while performing a secondary visual"manual task. One group of drivers had to work on this task in predefined situations under time pressure, whereas the other group was free to decide when to work on the secondary task (self-regulation group). Drivers' performance (e.g., lateral and longitudinal control, brake reaction times) was also compared with a baseline condition without any secondary task. For the system-paced secondary task, distraction was associated with high decrements in driving performance (especially in keeping the lateral position). No effects were found for the number of collisions, probably because of the lower driving speeds while distracted (compensatory behavior). For the self-regulation group, only small impairments in driving performance were found. Drivers engaged less in the secondary task during foreseeable demanding or critical driving situations. Overall, drivers in the self-regulation group were able to anticipate the demands of different traffic situations and to adapt their engagement in the secondary task, so that only small impairments in driving performance occurred. Because in real traffic drivers are mostly free to decide when to engage in secondary tasks, it can be concluded that self-regulation should be considered in driver distraction research to ensure ecological validity.
Motorcycling is a fascinating kind of transportation. While the riders' direct exposure to the environment and the unique driving dynamics are essential to this fascination, they both cause a risk potential which is several times higher than when driving a car. This chapter gives a detailed introduction to the fundamentals of motorcycle dynamics and shows how its peculiarities and limitations place high demands on the layout of dynamics control systems, especially when cornering. The basic principles of dynamic stabilization and directional control are addressed along with four characteristic modes of instability (capsize, wobble, weave, and kickback). Special attention is given to the challenges of braking (brake force distribution, dynamic over-braking, kinematic instability, and brake steer torque induced righting behavior). It is explained how these challenges are addressed by state-of-the-art brake, traction, and suspension control systems in terms of system layout and principles of function. It is illustrated how the integration of additional sensors " essentially roll angle assessment " enhances the cornering performance in all three categories, fostering a trend to higher system integration levels. An outlook on potential future control systems shows exemplarily how the undesired righting behavior when braking in curves can be controlled, e.g., by means of a so-called brake steer torque avoidance mechanism (BSTAM), forming the basis for predictive brake assist (PBA) or even autonomous emergency braking (AEB). Finally, the very limited potential of brake and chassis control to stabilize yaw and roll motion during unbraked cornering accidents is regarded, closing with a promising glance at roll stabilization through a pair of gimbaled gyroscopes.
In line with the new definition introduced by the European Commission (EC), the number of seriously injured road casualties in Germany for 2014 is assessed in this study. The number of MAIS3+ casualties is estimated by two different methodological approaches. The first approach is based on data from the German Inâ€Depth Accident Study (GIDAS), which is closely related to the German Road Traffic Accident Statistics. The second approach is based on data from the German TraumaRegister DGU-® (TRâ€DGU), which includes many more hospitals but not all MAIS3+ injuries.
Camera-monitor systems (CMS) can be used in motor vehicles to display the driver's rear view on a monitor mounted inside the vehicle. This also offers the possibility of replacing conventional exterior mirrors with suitable CMS and thereby implementing new design concepts with aerodynamic advantages. However, as exterior mirrors are safety-relevant vehicle parts for securing the driver's indirect rear view (requirements specified in UN Regulation No. 46), the question arises whether CMS can provide an equivalent substitute for mirrors. In the scope of this study, CMS and conventional exterior mirrors were compared and assessed in test drives and static tests under different external conditions. On the one hand, the examination of technical aspects, and on the other hand, issues pertaining to the design of the human-machine interaction, were the objects of the study. Two vehicles were available for the trials with passenger vehicles: A vehicle, manufactured in small series, which is already equipped with CMS as sole replacement for the exterior mirrors, as well as a compact class vehicle which had a CMS retrofitted by the car manufacturer in addition to conventionally used exterior mirrors. The latter could be covered exclusively for trips with CMS. A tractor unit with semitrailer was available for the truck trials. The driver's cabin was equipped with a CMS system developed by the vehicle manufacturer. In general, it was shown that it is possible to display the indirect rear view sufficiently for the driver, both for cars and trucks, using CMS which meet specific quality criteria. Depending on the design, it is even possible to receive more information about the rear space from a CMS than is possible with mirror systems. It was also shown that the change from mirrors to CMS requires a certain period of familiarisation. However, this period is relatively short and does not necessarily result in safety-critical situations.