91 Fahrzeugkonstruktion
Filtern
Erscheinungsjahr
Dokumenttyp
- Buch (Monographie) (55)
- Konferenzveröffentlichung (44)
- Arbeitspapier (10)
- Wissenschaftlicher Artikel (9)
- Teil eines Buches (Kapitel) (4)
- Bericht (2)
Schlagworte
- Safety (124) (entfernen)
The 2BeSafe project (2-Wheeler Behaviour and Safety) is a collaborative project (co financed by the European Commission) that aims to study the naturalistic behaviour of Powered-Two-Wheeler (PTW) riders in normal and critical riding situations. That includes the interaction between PTW riders and other road users and possible conflicts between them. One of the predominant causes of accidents involving PTWs is that PTWs are often overlooked by other road users. One task of the project lead by BASt therefore deals with possible improvements in conspicuity and the development of recommendations. Particularly using the findings of the studies on conflict situations, promising lighting arrangements to enhance conspicuity of PTWs during the day and at night are selected. An abstract recognizing pattern for PTWs is defined, enabling other road users (e.g. car drivers) to clearly identify riders. Lamps and outfit like lighting configurations of different colours, different helmet lights, reflect / luminescent clothing parts and retro-reflective markings are designed and manufactured. Then, the different solutions are tested in a laboratory setting using experimental motorcycles together with riders to which the equipment is fitted. As result a proposal for a uniform signal pattern or lamp configuration in the front of all motorcycles and riders will be outlined. The contribution first gives a short overview of the topics of the research project that deal with conflicts and their connection with poor conspicuity and then presents in detail the methods used in the activities concerning solutions for the improvement of conspicuity together with first results.
Aktive Systeme der passiven Fahrzeugsicherheit zum Fußgängerschutz, sogenannte crash-aktive Fußgängerschutzsysteme, werden seit 2005 zur Erfüllung der gesetzlichen Anforderungen (siehe Verordnung (EG) Nr. 78/2009 und 631/2009) in Serienfahrzeugen eingesetzt. Diese crash-aktiven Fußgängerschutzsysteme stellen im Gegensatz zu den rein passiven Systemen nur eine instationäre Lösung dar. Da die innerhalb der gesetzlichen Anforderungen definierten Testverfahren zur Bewertung stationärer Systeme entwickelt wurden, können derzeit mögliche Risiken instationärer Systeme nicht berücksichtigt werden. Im Rahmen dieses Forschungsprojektes soll ein Bewertungsverfahren für diese crash-aktiven Fußgängerschutzsysteme entwickelt werden, welches das reale Potential dieser Systeme möglichst gut wiedergibt. Basis hierfür soll eine umfangreiche Untersuchung zusätzlicher Risiken bilden. Die hier untersuchten instationären Schutzmaßnahmen werden nur im Falle eines Fahrzeuganpralls gegen Fußgänger aktiviert, der daher zuverlässig erkannt werden muss. Für die hierfür eingesetzten, kontaktbasierten Sensorsysteme stellen Fußgänger mit geringen Lasteinträgen in die Fahrzeugfront eine große Herausforderung dar. Die Lasteinträge hängen von zahlreichen Faktoren, wie bspw. der Höhe der entsprechenden Krafteinleitungspfade sowie der Größe und dem Gewichts des Fußgängers, ab. Mit Hilfe von umfangreichen Anprallversuchen und -simulationen wird gezeigt, dass die bisher eingesetzten Prüfkörper nur zum Teil für die Erfüllung dieser Anforderungen geeignet sind. Für ein geeignetes Prüfverfahren müssen daher neue Prüfkörper entwickelt werden. Durch die Aktivierung der Schutzmaßnahme soll bei den crash-aktiven Systemen vor allem das Verletzungsrisiko beim Kopfanprall verringert werden. Hierfür wird häufig die hintere Motorhaubenkante angehoben, um zusätzlichen Deformationsfreiraum zur Verfügung zu stellen. Die Haubenanhebung kann jedoch auch in zusätzlichen Verletzungsrisiken resultieren, bspw. durch die exponierte hintere Haubenkante oder die Verringerung des Deformationsfreiraums in Folge des Oberkörperanpralls. Ein Ersatzprüfverfahren zur Bewertung der Haubendeformation mit Hilfe des Hüftimpaktors wird vorgestellt. Ein hybrides Testverfahren bestehend aus Simulation und Versuch eignet sich für eine objektive Bewertung dieser Systeme, wobei die entsprechenden Versuchsparameter mit Hilfe der vorherigen Simulation bestimmt werden können.
The objectives of the FIMCAR (Frontal Impact and Compatibility Assessment Research) project are to answer the remaining open questions identified in earlier projects (such as understanding of the advantages and disadvantages of force based metrics and barrier deformation based metrics, confirmation of specific compatibility issues such as structural interaction, investigation of force matching) and to finalise the frontal impact test procedures required to assess compatibility. Research strategies and priorities were based on earlier research programs and the FIMCAR accident data analysis. The identified real world safety issues were used to develop a list of compatibility characteristics which were then prioritised within the consortium. This list was the basis for evaluating the different test candidates. This analysis resulted in the combination of the Full Width Deformable Barrier test (FWDB) with compatibility metrics and the existing Offset Deformable Barrier (ODB) as described in UN-ECE Regulation 94 with additional cabin integrity requirement as being proposed as the FIMCAR assessment approach. The proposed frontal impact assessment approach addresses many of the issues identified by the FIMCAR consortium but not all frontal impact and compatibility issues could be addressed.
For the assessment of vehicle safety in frontal collisions compatibility (which consists of self and partner protection) between opponents is crucial. Although compatibility has been analysed worldwide for over 10 years, no final assessment approach has been defined to date. Taking into account the European Enhanced Vehicle safety Committee (EEVC) compatibility and the final report to the steering committee on frontal impact [Faerber 2007] and the FP5 VC-COMPAT[Edwards 2007] project activities, two test approaches were identified as the most promising candidates for the assessment of compatibility. Both are composed of an off-set and a full overlap test procedure. In addition another procedure (a test with a moving deformable barrier) is getting more attention in current research programmes. The overall objective of the FIMCAR project is to complete the development of the candidate test procedures and propose a set of test procedures suitable for regulatory application to assess and control a vehicle- frontal impact and compatibility crash safety. In addition an associated cost benefit analysis will be performed. In the FIMCAR Deliverable D 3.1 [Adolph 2013] the development and assessment of criteria and associated performance limits for the full width test procedure were reported. In this Deliverable D3.2 analyses of the test data (full width tests, car-to-car tests and component tests), further development and validation of the full width assessment protocol and development of the load cell and load cell wall specification are reported. The FIMCAR full-width assessment procedure consists of a 50 km/h test against the Full Width Deformable Barrier (FWDB). The Load Cell Wall behind the deformable element assesses whether or not important Energy Absorbing Structures are within the Common Interaction Zone as defined based on the US part 581 zone. The metric evaluates the row forces and requires that the forces directly above and below the centre line of the Common Interaction Zone exceed a minimum threshold. Analysis of the load spreading showed that metrics that rely on sum forces of rows and columns are within acceptable tolerances. Furthermore it was concluded that the Repeatability and Reproducibility of the FWDB test is acceptable. The FWDB test was shown to be capable to detect lower load paths that are beneficial in car-to-car impacts.
For the assessment of vehicle safety in frontal collisions compatibility (which consists of self and partner protection) between opponents is crucial. Although compatibility has been analysed worldwide for over 10 years, no final assessment approach has been defined to date. Taking into account the European Enhanced Vehicle safety Committee (EEVC) compatibility and frontal impact working group (WG15) and the FP5 VC-COMPAT project activities, two test approaches have been identified as the most promising candidates for the assessment of compatibility. Both are composed of an off-set and a full overlap test procedure. In addition another procedure (a test with a moving deformable barrier) is getting more attention in current research programmes. The overall objective of the FIMCAR project is to complete the development of the candidate test procedures and propose a set of test procedures suitable for regulatory application to assess and control a vehicle- frontal impact and compatibility crash safety. In addition an associated cost benefit analysis should be performed. The objectives of the work reported in this deliverable were to review existing full-width test procedures and their discussed compatibility metrics, to report recent activities and findings with respect to full-width assessment procedures and to assess test procedures and metrics. Starting with a review of previous work, candidate metrics and associated performance limits to assess a vehicle- structural interaction potential, in particular its structural alignment, have been developed for both the Full Width Deformable Barrier (FWDB) and Full Width Rigid Barrier (FWRB) tests. Initial work was performed to develop a concept to assess a vehicle- frontal force matching. However, based on the accident analyses performed within FIMCAR frontal force matching was not evaluated as a first priority and thus in line with FIMCAR strategy the focus was put on the development of metrics for the assessment of structural interaction which was evaluated as a first priority.
Cost benefit analysis
(2014)
Although the number of road accident casualties in Europe is falling the problem still remains substantial. In 2011 there were still over 30,000 road accident fatalities [EC 2012]. Approximately half of these were car occupants and about 60 percent of these occurred in frontal impacts. The next stage to improve a car- safety performance in frontal impacts is to improve its compatibility for car-to-car impacts and for collisions against objects and HGVs. Compatibility consists of improving both a car- self and partner protection in a manner such that there is good interaction with the collision partner and the impact energy is absorbed in the car- frontal structures in a controlled way which results in a reduction of injuries. Over the last ten years much research has been performed which has found that there are four main factors related to a car- compatibility [Edwards 2003, Edwards 2007]. These are structural interaction potential, frontal force matching, compartment strength and the compartment deceleration pulse and related restraint system performance. The objective of the FIMCAR FP7 EC-project was to develop an assessment approach suitable for regulatory application to control a car- frontal impact and compatibility crash performance and perform an associated cost benefit analysis for its implementation.
The objective of this deliverable is to describe the expected influence of the candidate test procedures developed in FIMCAR for frontal impact on other impact types. The other impact types of primary interest are front-to-side impacts, collisions with road restraint systems (e.g. guardrails), and heavy goods vehicle impacts. These collision types were chosen as they involve structures that can be adapted to improve safety. Collisions with vulnerable road users (VRU) were not explicitly investigated in FIMCAR. It is expected that the vehicle structures of interest in FIMCAR can be designed into a VRU friendly shell. Information used for this deliverable comes from simulations and car-to-car crash tests conducted in FIMCAR or review of previous research. Three test configurations (full width, offset, and moving deformable barriers) were the input to the FIMCAR selection process. There are three different types of offset tests and two different full width tests. During the project test procedures could be divided into three groups that provide different influences or outcomes on vehicle designs: 1. The ODB barrier provides a method to assess part of the vehicles energy absorption capabilities and compartment test in one test. 2. The FWRB and FWDB have similar capabilities to control structural alignment, further assess energy absorption capabilities, and promote the improvements in the occupant restraint system for high deceleration impacts. 3. The PDB and MPDB can be used to promote better load spreading in the vehicle structures, in addition to assessing energy absorption and occupant compartment strength in an offset configuration. The consortium selected the ODB and FWDB as the two best candidates for short term application in international rulemaking. The review of how all candidates would affect vehicle performance in other impacts (beside front-to-front vehicle or frontal impacts with fixed obstacles) however is reported in this deliverable to support the benefit analysis reported in FIMCAR. The grouping presented above is used to discuss all five test candidates using similarities between certain tests and thereby simplify the discussion.
Accident analysis
(2014)
For the assessment of vehicle safety in frontal collisions compatibility (which consists of self and partner protection) between opponents is crucial. Although compatibility has been analysed worldwide for years, no final assessment approach has been defined to date. Taking into account the European Enhanced Vehicle safety Committee (EEVC) compatibility and frontal impact working group (WG15) and the EC funded FP5 VC-COMPAT project activities, two test approaches have been identified as the most promising candidates for the assessment of compatibility. Both are composed of an off-set and a full overlap test procedure. In addition another procedure (a test with a moving deformable barrier) is getting more attention in today- research programmes. The overall objective of the FIMCAR project is to complete the development of the candidate test procedures and propose a set of test procedures suitable for regulatory application to assess and control a vehicle- frontal impact and compatibility crash safety. In addition an associated cost benefit analysis should be performed. The specific objectives of the work reported in this deliverable were: - Determine if previously identified compatibility issues are still relevant in current vehicle fleet: Structural interaction, Frontal force matching, Compartment strength in particular for light cars. - Determine nature of injuries and injury mechanisms: Body regions injured o Injury mechanism: Contact with intrusion, Contact, Deceleration / restraint induced. The main data sources for this report were the CCIS and Stats 19 databases from Great Britain and the GIDAS database from Germany. The different sampling and reporting schemes for the detailed databases (CCIS & GIDAS) sometimes do not allow for direct comparisons of the results. However the databases are complementary " CCIS captures more severe collisions highlighting structure and injury issues while GIDAS provides detailed data for a broader range of crash severities. The following results represent the critical points for further development of test procedures in FIMCAR.
The off-set assessment procedure potentially contributes to the FIMCAR objectives to maintain the compartment strength and to assess load spreading in frontal collisions. Furthermore it provides the opportunity to assess the restraint system performance with different pulses if combined with a full-width assessment procedure in the frontal assessment approach. Originally it was expected that the PDB assessment procedure would be selected for the FIMCAR assessment approach. However, it was not possible to deliver a compatibility metric in time so that the current off-set procedure (ODB as used in UNECE R94) with some minor modifications was proposed for the FIMCAR Assessment Approach. Nevertheless the potential to assess load spreading, which appears not to be possible with any other assessed frontal impact assessment procedure was considered to be still high. Therefore the development work for the PDB assessment procedure did not stop with the decision not to select the PDB procedure. As a result of the decisions to use the current ODB and to further develop the PDB procedure, both are covered within this deliverable. The deliverable describes the off-set test procedure that will be recommended by FIMCAR consortium, this corresponds to the ODB test as it is specified in UN-ECE Regulation 94 (R94), i.e. EEVC deformable element with 40% overlap at a test speed of 56 km/h. In addition to the current R94 requirements, FIMCAR will recommend to introduce some structural requirements which will guarantee sufficiently strong occupant compartments by enforcing the stability of the forward occupant cell. With respect to the PDB assessment procedure a new metric, Digital Derivative in Y direction - DDY, was developed, described, analysed, and compared with other metrics. The DDY metric analyses the deformation gradients laterally across the PDB face. The more even the deformation, the lower the DDY values and the better the metric- result. In order analyse the different metrics, analysis of the existing PDB test results and the results of the performed simulation studies was performed. In addition, an assessment of artificial deformation profiles with the metrics took place. This analysis shows that there are still issues with the DDY metric but it appears that it is possible to solve them with future optimisations. For example the current metric assesses only the area within 60% of the half vehicle width. For vehicles that have the longitudinals further outboard, the metric is not effective. In addition to the metric development, practical issues of the PDB tests such as the definition of a scan procedure for the analysis of the deformation pattern including the validation of the scanning procedure by the analysis of 3 different scans at different locations of the same barrier were addressed. Furthermore the repeatability and reproducibility of the PDB was analysed. The barrier deformation readings seem to be sensitive with respect to the impact accuracy. In total, the deliverable is meant to define the FIMCAR off-set assessment procedure and to be a starting point for further development of the PDB assessment procedure.
Um die zukünftige Entwicklung von Fahrzeugen mit alternativem Antrieb in Deutschland verfolgen, analysieren und mögliche negative Auswirkungen auf die Verkehrssicherheit zeitnah identifizieren zu können, hat die Bundesanstalt für Straßenwesen (BASt) im Jahr 2010 die Einrichtung einer langfristigen Beobachtung des Fahrzeugmarktes und des Unfallgeschehens von Pkw mit alternativen Antriebsarten initiiert. Die Daten des vorliegenden Berichtes dokumentieren die Marktdurchdringung von Personenkraftwagen mit alternativen Antriebsarten und informieren über die Unfallbeteiligung von Fahrzeugen mit alternativem Antrieb bis 2011. Es hat sich gezeigt, dass Fahrzeuge mit Hybridantrieb nach wie vor ein starkes Marktwachstum aufweisen. Die Zuwachsrate ist nahezu auf dem gleichen hohen Niveau wie in den Vorjahren (ca. 28%, getypter Bestand). Bei den reinen Elektrofahrzeugen ist die Anzahl getypter Fahrzeuge sehr stark angestiegen, von 212 im Jahr 2010 auf 1880 im Jahr 2011. Der reale Bestand an Elektrofahrzeugen (inklusive ungetypter Fahrzeuge) hat sich demgegenüber von 2010 auf 2011 auf 4.541 Pkw verdoppelt. Dies deutet auf eine zunehmende Serienreife von Elektro-Kfz hin. Pkw mit alternativem Antrieb weisen 2011 (bis auf Gas) einen höheren Anteil an Unfällen innerorts auf als Pkw mit herkömmlichem Antrieb. Hybrid Fahrzeuge haben dabei eine erhöhte Beteiligungsquote innerorts von ca. 76%. Der relativ hohe Anteil von Innerortsunfällen von alternativ betriebenen Fahrzeugen ist vor allem vor dem Hintergrund der Nutzung der Fahrzeuge zu interpretieren.
Annual report 2011/2012
(2013)
Traffic on German roads is increasing continuously. The research of the Federal Institute for Materials Research (BASt) is concerned with a road system that will be functioning well in the future, that is safe and economically and ecologically sustainable. Every two years, BASt reports on its tasks, research projects and selected administrative topics. The current report comprises the years of 2011 and 2012. On 151 pages, it provides an idea of current research about important topics of roads and traffic. The projects SKRIBT and SKRIBTPlus examined the behaviour of drivers in tunnels in hazardous situations. It was discovered that in situations like this many people often react inadequately and too late. The collected data were used to develop new concepts that improve behaviour in hazardous situations in tunnels. In recent years, new safety systems that improve braking behaviour in hazardous situations have been installed in vehicles. However, for end users it is difficult to compare different systems because they have no access to suitable assessments. The EU project ASSESS (Assessment of Integrated Vehicle Safety Systems for improved vehicle safety) in which BASt is involved as a key partner therefore developed a uniform procedure for assessment and legal questions. Many European countries agree: Alcohol, drugs and medication in road traffic constitute a safety risk on European roads. In order to gain new insights and to develop suitable countermeasures, the European Commission approved of the largest research project to improve road safety to date: DRUID (Driving Under the Influence of Drugs, Alcohol and Medicines). This BASt-coordinated project took five years and involved institutes from 18 European countries. The result is a comprehensive stock taking and concrete suggestions on measures to be taken. A mayor part of the work of BASt also comprises extension and maintenance of the entire road infrastructure. The report "How will we make constructions in the future: Road construction without oil?" for instance examines the question how we will maintain and extend our roads in the future with resources becoming scarcer and more expensive. Furthermore, the campaign "on" the road plays a major part at BASt. For years there has been a shortage of parking spaces for trucks on federal highways. To remedy this situation, BAST has developed a new control approach: The so-called compact parking system increases capacities and uses them more effectively by parking trucks in a line according to their planned departure time.
In 2012 the fifth ESAR conference (Expert Symposium on Accident Research) was held in Hannover. ESAR is an international convention of experts, who analyze traffic accidents all over the world and discuss their results in this context, conducted at the Medizinische Hochschule Hannover every 2 years. It connected representatives of public authorities, engineers in automotive development and scientists and offers a forum with particular emphasis on In-Depth-Analyses of accident statistics and accident analyses. Special focus is placed on research on the basis of so-called "In-Depth-Accident-Investigations" [data collections at the sites of the accidents], which are characterized by extensive documentations of the sites of the accidents, of the vehicles as well as of the injuries, encompassing several scientific fields. ESAR aims at a multi-disciplinary compilation of scientific results and at discussing them on an international, scientific level. It is thus a scientific colloquium and a platform for exchanging information for all accident researchers. Experiences in accident prevention as well as in the complex field of accident reconstruction are stated and new research fields are added. Existing results of long-term research work in Europe, the US, Australia and Japan include different infrastructural correlations and give findings on population, vehicle population and driver characteristics, which offer a basis for recommendations to be derived and measures for increasing road safety.
Jahresbericht 2011/2012
(2013)
Der Verkehr auf deutschen Straßen nimmt immer weiter zu. Einem auch in Zukunft gut funktionierenden, sicheren und ökonomisch wie ökologisch verträglichen System Straße widmet sich die Forschung der Bundesanstalt für Straßenwesen (BASt). Alle zwei Jahre berichtet die BASt über ihre Aufgaben, Forschungsprojekte und ausgewählte Themen der Verwaltung. Der aktuelle Bericht umfasst die Jahre 2011 und 2012. Auf 151 Seiten gibt er einen kleinen Einblick in die aktuelle Forschung zu wichtigen Themen des Straßenwesens. In den Projekten SKRIBT und SKRIBTPlus wurde das Verhalten von Autofahrerinnen und Autofahrern in Gefahrensituationen im Tunnel untersucht. Es stellte sich heraus, dass in solchen Situationen oft falsch und zu spät reagiert wird. Durch die gesammelten Daten konnten neue Konzepte entwickelt werden, die das Verhalten bei Gefahren in Tunneln verbessern. In Kraftfahrzeugen kamen zwar in den letzten Jahren neue Sicherheitssysteme zum Einsatz, die in Gefahrensituationen das Bremsverhalten verbessern. Bisher ist es jedoch für den Endverbraucher schwer, unterschiedliche Systeme zu vergleichen, da keine geeigneten Bewertungen herangezogen werden können. Im EU-Projekt ASSESS (Assessment of Integrated Vehicle Safety Systems for improved vehicle safety), an dem die BASt maßgeblich beteiligt ist, wurde deshalb an einem einheitlichen Verfahren zur Bewertung und an juristischen Fragenstellungen gearbeitet. Viele europäische Länder sind sich einig: Alkohol, Drogen und Medikamente im Straßenverkehr gefährden die Sicherheit auf Europas Straßen. Um sich ein genaueres Bild machen zu können und geeignete Gegenmaßnahmen zu entwickeln, bewilligte die Europäische Kommission das bisher größte Forschungsprojekt zur Verbesserung der Verkehrssicherheit: DRUID (Driving Under the Influence of Drugs, Alcohol and Medicines). An dem fünf Jahre dauernden und von der BASt koordinierten Projekt, beteiligten sich Institute aus 18 europäischen Ländern. Das Ergebnis ist eine umfassende Bestandsaufnahme sowie konkrete Maßnahmenvorschläge. Die Arbeit der BASt umfasst im großen Maße auch den Ausbau und Erhalt der gesamten Straßeninfrastruktur. Der Beitrag "Wie bauen wir in der Zukunft: Straßenbau ohne OEl?" geht beispielsweise der Frage nach, wie wir bei immer knapper werdenden und teuer zu bezahlenden Ressourcen unsere Straßen zukünftig erhalten und ausbauen werden. Auch die Aktion "auf" der Straße spielt eine große Rolle in der BASt. Seit Jahren zeichnet sich ein Mangel an Parkplätzen für Lkw an Bundesautobahnen ab. Um hier Abhilfe zu schaffen, hat die BASt einen neuen Steuerungsansatz entwickelt: Beim sogenannten Kompaktparken werden Kapazitäten erhöht und effektiver genutzt, indem Lkw in Reihe, nach ihrer geplanten Abfahrzeit, geparkt werden.
Die EU hat für die Verkehrssicherheit in Europa ein anspruchsvolles Ziel vorgegeben: Bis 2010 soll die Anzahl der im Straßenverkehr Getöteten gegenüber 2000 halbiert werden. Für Deutschland kann eine erfolgreiche Zwischenbilanz gezogen werden: In den letzten 5 Jahren nahm trotz Vergrößerung des Kraftfahrzeugbestandes um 6% die Anzahl der Verkehrstoten um 29% ab, in den vergangenen 10 Jahren ist ein Rückgang um 43% zu verzeichnen. Diese im internationalen Vergleich überdurchschnittlichen Erfolge sind nicht zuletzt auch auf Fortschritte in der Fahrzeugtechnik zurückzuführen, wobei die zunehmende Verbreitung von Systemen der Aktiven Sicherheit wie ABS, BAS, ESP einen entscheidenden Anteil hat. Nach der deutlichen Reduzierung von Fahrunfällen durch ESP-® stehen nun die Auffahrunfälle im Fokus der Sicherheitsentwicklung von Mercedes-Benz. Das Paket aus verbessertem rückwärtigen Signalbild (Adaptives Bremslicht) und Brems-Assistent (BAS) wurde kürzlich durch radarbasierte Bremsassistenz ergänzt (BAS PLUS und PRE-SAFE-®-Bremse). Der Beitrag geht auf Funktion und Wirksamkeit der einzelnen Systeme ein und gibt einen Ausblick in die nähere Zukunft.
Motorcycle safety research
(2007)
Honda- global motorcycle sales exceeded the 10 million units mark since 2004, and further expansion is expected. As a responsibility for a company to provide mobility, Honda is focusing on motorcycle safety as top priority and has been working on various activities for both aspects of hardware and software. Here, we present Honda- activity for the safety technology of motorcycles. At present, Honda is promoting motorcycle safety in the four themes of prevention and collision safety such as safety education, recognition assistance, accident prevention and injury reduction. First, in the area of the safety education, the "Honda Safety Driving Promotion Center" was established in 1970, and motorcycle riders and vehicle driver trainings have been organized, and the traffic training centers are used as an actual practice field not only in Japan but also in many other regions in the world. Through our training activities, the new area of safety training with hardware assistance was developed and Honda- unique technology was accumulated such as the riding simulator which can provide experience of potentially dangerous situations without risk. Especially, the "riding trainer", the popular version of the riding simulator, was introduced at several motor shows in various countries and launched in September 2005. It was distributed first in Europe and is expected to expand globally aiming at 3000 units worldwide.. And in Europe, the newest version, which includes the suburban roads program, jointly developed with ADAC, will be released in near future. In the area of recognition assistance, "vehicle to vehicle communication technology" is under development using the advantage of being a manufacturer of both motorcycles and cars. This technology is under research as Honda "ASV-3" in Japan, and as part of C2C activity in Europe. As for the accident prevention, advanced brake systems for motorcycles to assist more effective brake operation have been expanded, Honda signed the European Road Safety Charter in April 2004 with the advanced brake systems commitment and furthermore, they are expanding according to vehicle characteristics and region. Then all models above 250 cc will have a version of the system by 2010. And as the last theme, "motorcycle airbag system" is introduced which is equipped on a mass production motorcycle for the first time in the world. It has been researched and developed for a long time as an injury reduction technology for collision accidents. Honda automobile technology was used for the research and development of the motorcycle airbag, and many specific issues such as the analysis of the collision conditions particular to motorcycles have been solved to realize today- success. It might be known that ADAC in-house crash test held in August this year confirmed the high effectiveness of the airbag system and showed a positive result. This motorcycle airbag system is equipped to the Honda Gold Wing and launched in North America in August, 2006. Also in Europe, it will be sold by the end of this year. Each theme of Honda motorcycle safety technology can be seen at the Honda booth.
Der Allgemeine Deutsche Automobil-Club e.V. (ADAC) und die Bundesanstalt für Straßenwesen (BASt) veranstalteten am 13. Oktober 2006 in Baden-Baden das 6. Symposium "Sicher fahren in Europa". Die Fachvorträge befassten sich mit den Themenbereichen: Ansätze zu mehr Verkehrssicherheit, - Verbesserung der Fahrzeugsicherheit, - Besondere Zielgruppen. Die CD-ROM dokumentiert die Grußworte, die Referate und die Podiumsdiskussion.
An analysis of NASS and FARS was conducted to determine crash conditions that involved injuries that are not currently being directly addressed by vehicle safety standards or by consumer information test protocols. Analysis of both field data and US NCAP tests were conducted to determine the relative safety provided by seating position and by vehicle model year. Opportunities for improvements were determined by crash categories with large populations of injuries that were not addressed by safety tests or smaller numbers that were increasing in frequency. Areas of opportunities include improved occupant restrain in rollovers, improved frontal protection for rear seat occupants and improved fire prevention in frontal and rollover crashes.
Elektronik und IT werden auch im Automobilbereich zunehmend Gegenstand unautorisierter Veränderungen. Diese Studie stellt einen ersten, breiteren Überblick über die praktische Relevanz elektronischer Veränderungen an Fahrzeug- und Infrastruktursystemen dar. Es liefert einen Überblick über wesentliche bekannte und existente Beispiele von Möglichkeiten derartiger Veränderungen, das Risiko ihres Auftretens und damit verbundene Gefahren. Die Ergebnisse basieren auf einer Recherche, die neben wissenschaftlichen Quellen insbesondere das Internet als neues, interaktives Medium einbezieht. Es werden Abschätzungen zur praktischen Relevanz dieser Veränderungen vorgenommen und potentielle Folgen insbesondere für die Verkehrssicherheit reflektiert. Praktische Hinweise auf elektronische Veränderungen sind an 24 Fahrzeug- und Infrastruktursystemen dokumentiert, die als Ziel teils mehrerer Arten von elektronischen Veränderungen identifiziert wurden. Dies erstreckt sich über verschiedene Domänen wie u.a. den Antriebstrang, das Fahrwerk, Infotainment, Fahrerassistenz und mehrere Infrastrukturkomponenten. Diese Systematisierung enthält zudem eine Klassifikation der agierenden Personen, wobei deren individuelle Motivationen, technische Kenntnisse und Ausstattung unterschieden werden. Das Spektrum potentiell resultierender Gefahren wird einerseits theoretisch anhand der erstellten Systematisierungen aufgezeigt und andererseits an 19 Rechercheergebnissen aus verschiedenen Bereichen illustriert. Die so vorgenommene Analyse des Gefährdungspotentials wird ergänzt durch einen Ausblick auf potentielle zukünftige Gefährdungen, die sich insbesondere in kommenden Car-to-Car Kommunikationsnetzen ergeben könnten und die weitere Erforschung von Schutzkonzepten motivieren. Während die recherchierten Veränderungen heute noch meist vom Nutzer ausgehen und das Gefährdungspotential häufig unbeabsichtigt entsteht, könnte zukünftig das vorsätzliche Herbeiführen von Gefährdungen an Bedeutung gewinnen.
Jahresbericht 2009/2010
(2011)
In der Bundesanstalt für Straßenwesen (BASt) wird bereits seit 60 Jahren Forschungsarbeit für Sicherheit, Effizienz, Ökologie sowie Ökonomie auf dem Gebiet des Straßenverkehrswesens geleistet. Der Jahresbericht stellt die Forschungsschwerpunkte aus den letzten beiden Jahren vor: Viele Einzelmaßnahmen sind im Hinblick auf das sichere Verhalten der Verkehrsteilnehmer nötig. Bei der Umsetzung der Sicherheitskampagne "Runter vom Gas" war es Aufgabe der BASt, das Bundesverkehrsministerium (BMVBS) im Entscheidungsprozess über Zielsetzung, Zielgruppendefinition, Kampagnenbotschaft sowie Form und Dauer der Kampagne zu unterstützen. Durch das "Begleitete Fahren ab 17" und die Einführung eines generellen Alkoholverbotes für Fahranfänger konnten die Unfallzahlen der Fahranfänger in den letzten Jahren deutlich gesenkt werden. Die BASt ist auch an der Entwicklung von Maßnahmen und Kampagnen für weitere Risikogruppen beteiligt, zum Beispiel Zweiradfahrer, Ältere und Kinder. Im Bereich der Fahrzeugtechnik werden kooperative Verkehrssysteme, die auf der Vernetzung von Fahrzeugen oder Fahrzeugen und Verkehrstechnik beruhen, in den Blickpunkt genommen. Geeignete Strategien für eine Bewertung der Wirkung und damit der Effizienz sind zu entwickeln, um die erwarteten Vorteile der kooperativen Verkehrssysteme nutzbar zu machen. Vorausschauende und integrierte Fahrzeugsicherheitssysteme, die neben der passiven auch die aktive Sicherheit verbessern, sind auf dem Vormarsch. Neben der Sicherheit beschäftigen aber auch rechtliche Fragestellungen die Fachleute. Auch die Entwicklung und Verbreitung von Fahrzeugen mit alternativen Antrieben mit all ihren Möglichkeiten und Risiken stellen neue Fragen an die Forschung. Hochautomatisierung (für sehr kurze Zeitspannen) wird von der BASt derzeit in verschiedenen Projekten erforscht. Weiterer Fokus der Forschungsarbeit ist es, die Schonung von Umwelt und Ressourcen zu fördern. Es werden Maßnahmen entwickelt und getestet, um die Schadstoff- sowie die Lärmbelastung zu reduzieren. Beispielsweise wird untersucht, inwieweit Nanopartikel aus Titandioxid zur Reduzierung der Stickoxidkonzentrationen an hoch belasteten Verkehrswegen eingesetzt werden können. In Pilotprojekten werden Verfahren, die sich im Labor bereits bewährt haben "auf der Straße" erprobt. Im Hinblick auf den Klimawandel wurde in der BASt eine Arbeitsgruppe eingerichtet, die sich mit den zu erwartenden Auswirkungen beschäftigt, um diesen rechtzeitig begegnen zu können. Für den Straßenbau ist im Sinne einer nachhaltigen Kreislaufwirtschaft die Verwendung vorhandener Infrastrukturen als Rohstoffquelle zu erforschen und zu nutzen. Bei neuen Asphaltkonzeptionen wird insbesondere eine Steigerung des Wertschöpfungsniveaus angestrebt. In der Abteilung Straßenverkehrstechnik werden Verfahren entwickelt, um unfallauffällige Bereiche im Straßennetz bereits in der Planungsphase zu identifizieren. Die Ausstattung der Straße mit optimierten Verkehrsbeeinflussungsanlagen und Schutzeinrichtungen, ökonomischen Beleuchtungsanlagen sowie dauerhaften, gut sichtbaren Fahrbahnmarkierungen sind Arbeitsschwerpunkte; ebenso der effektive und ökologische Winterdienst sowie gut erkennbare Warn- und Leiteinrichtungen an Arbeitsstellen. Mehrere internationale Projekte, in denen die BASt aktiv mitarbeitet, fokussieren die zivile Sicherheit der gesamten Straßeninfrastruktur. Verkehrsinfrastruktur zu optimieren und zu erhalten ist Forschungsziel im Bereich des Brücken- und Ingenieurbaus. Nachhaltigkeit ist hier zentrales Leitbild für die Zukunft. Um detaillierte Aussagen über die Belastung und den Zustand von Straßen und Brücken zu machen, baut eine abteilungsübergreifende Arbeitsgruppe der BASt ein Netz von Achslastmessstellen auf und erhebt regelmäßig Daten. Diese werden analysiert und fließen in diverse Managementsysteme der Straßen und Bauwerke für Erhaltungs- und Planungsmaßnahmen ein. Im Rahmen der Zustandserfassung und "bewertung von Fahrbahnoberflächen werden zudem alle Bundesfernstraßen alle vier Jahre messtechnisch erfasst. Zustandskarten und spezielle Statistiken sind so jederzeit für die Aufgaben von Bund, Ländern und Dritten verfügbar. Durch einen prozesssicheren automatisierten Straßenbau sollen künftig Schwachstellen beim Straßenbau vermieden werden.
This paper set out to examine the possibilities for injury avoidance implications for older drivers in crashes, based on crash and injury patterns among older drivers and current trends in ageing in most western societies. A number of safety technologies were identified and discussed which have potential for improving vehicle older driver crash avoidance and crashworthiness. While there were some promising estimates available of the likely benefits of this technology for improving safety, it is evident that they need to be confirmed for older drivers, given their age-related disabilities and sensory limitations. Further research is urgently required to ensure that these technologies yield safety benefits without any disbenefits for older drivers.rn