91 Fahrzeugkonstruktion
Filtern
Erscheinungsjahr
Dokumenttyp
- Buch (Monographie) (37)
- Konferenzveröffentlichung (17)
- Arbeitspapier (7)
- Wissenschaftlicher Artikel (5)
- Bericht (2)
- Teil eines Buches (Kapitel) (1)
Schlagworte
- Versuch (69) (entfernen)
Accident analysis
(2014)
For the assessment of vehicle safety in frontal collisions compatibility (which consists of self and partner protection) between opponents is crucial. Although compatibility has been analysed worldwide for years, no final assessment approach has been defined to date. Taking into account the European Enhanced Vehicle safety Committee (EEVC) compatibility and frontal impact working group (WG15) and the EC funded FP5 VC-COMPAT project activities, two test approaches have been identified as the most promising candidates for the assessment of compatibility. Both are composed of an off-set and a full overlap test procedure. In addition another procedure (a test with a moving deformable barrier) is getting more attention in today- research programmes. The overall objective of the FIMCAR project is to complete the development of the candidate test procedures and propose a set of test procedures suitable for regulatory application to assess and control a vehicle- frontal impact and compatibility crash safety. In addition an associated cost benefit analysis should be performed. The specific objectives of the work reported in this deliverable were: - Determine if previously identified compatibility issues are still relevant in current vehicle fleet: Structural interaction, Frontal force matching, Compartment strength in particular for light cars. - Determine nature of injuries and injury mechanisms: Body regions injured o Injury mechanism: Contact with intrusion, Contact, Deceleration / restraint induced. The main data sources for this report were the CCIS and Stats 19 databases from Great Britain and the GIDAS database from Germany. The different sampling and reporting schemes for the detailed databases (CCIS & GIDAS) sometimes do not allow for direct comparisons of the results. However the databases are complementary " CCIS captures more severe collisions highlighting structure and injury issues while GIDAS provides detailed data for a broader range of crash severities. The following results represent the critical points for further development of test procedures in FIMCAR.
The off-set assessment procedure potentially contributes to the FIMCAR objectives to maintain the compartment strength and to assess load spreading in frontal collisions. Furthermore it provides the opportunity to assess the restraint system performance with different pulses if combined with a full-width assessment procedure in the frontal assessment approach. Originally it was expected that the PDB assessment procedure would be selected for the FIMCAR assessment approach. However, it was not possible to deliver a compatibility metric in time so that the current off-set procedure (ODB as used in UNECE R94) with some minor modifications was proposed for the FIMCAR Assessment Approach. Nevertheless the potential to assess load spreading, which appears not to be possible with any other assessed frontal impact assessment procedure was considered to be still high. Therefore the development work for the PDB assessment procedure did not stop with the decision not to select the PDB procedure. As a result of the decisions to use the current ODB and to further develop the PDB procedure, both are covered within this deliverable. The deliverable describes the off-set test procedure that will be recommended by FIMCAR consortium, this corresponds to the ODB test as it is specified in UN-ECE Regulation 94 (R94), i.e. EEVC deformable element with 40% overlap at a test speed of 56 km/h. In addition to the current R94 requirements, FIMCAR will recommend to introduce some structural requirements which will guarantee sufficiently strong occupant compartments by enforcing the stability of the forward occupant cell. With respect to the PDB assessment procedure a new metric, Digital Derivative in Y direction - DDY, was developed, described, analysed, and compared with other metrics. The DDY metric analyses the deformation gradients laterally across the PDB face. The more even the deformation, the lower the DDY values and the better the metric- result. In order analyse the different metrics, analysis of the existing PDB test results and the results of the performed simulation studies was performed. In addition, an assessment of artificial deformation profiles with the metrics took place. This analysis shows that there are still issues with the DDY metric but it appears that it is possible to solve them with future optimisations. For example the current metric assesses only the area within 60% of the half vehicle width. For vehicles that have the longitudinals further outboard, the metric is not effective. In addition to the metric development, practical issues of the PDB tests such as the definition of a scan procedure for the analysis of the deformation pattern including the validation of the scanning procedure by the analysis of 3 different scans at different locations of the same barrier were addressed. Furthermore the repeatability and reproducibility of the PDB was analysed. The barrier deformation readings seem to be sensitive with respect to the impact accuracy. In total, the deliverable is meant to define the FIMCAR off-set assessment procedure and to be a starting point for further development of the PDB assessment procedure.
The overall purpose of the ASSESS project is to develop a relevant and standardised set of test and assessment methods and associated tools for integrated vehicle safety systems, primarily focussing on currently available pre-crash sensing systems. The first stage of the project was to define casualty relevant accident scenarios so that the test scenarios will be developed based on accident scenarios which currently result in the greatest injury outcome, measured by a combination of casualty severity and casualty frequency. The first analysis stage was completed using data from a range of accident databases, including those which were nationally representative (STATS19, UK and STRADA, SE) and in-depth sources which provided more detailed parameters to characterise the accident scenarios (GIDAS, DE and OTS, UK). A common analysis method was developed in order to compare the data from these different sources, and while the data sets were not completely compatible, the majority of the data was aligned in such a way that allowed a useful comparison to be made. As the ASSESS project focuses on pre-crash sensing systems fitted to passenger cars, the data selected for the analysis was "injury accidents which involved at least one passenger car". The accident data analysis yielded the following ranked list of most relevant accident scenarios: Rank Accident scenario 1 Driving accident - single vehicle loss of control 2 Accidents in longitudinal traffic (same and opposite directions) 3 Accidents with turning vehicle(s) or crossing paths in junctions 4 Accidents involving pedestrians The ranked list highlights the relatively large role played by "accidents in longitudinal traffic", and "accidents with turning vehicle(s) or crossing paths in junctions" (the second and third most prevalent accident scenarios, respectively). The pre-crash systems addressed in ASSESS propose to yield beneficial safety outcomes with specific regard to these accident scenarios. This indicates that the ASSESS project is highly relevant to the current casualty crash problem. In the second stage of the analysis a selection of these accident scenarios were analysed further to define the accident parameters at a more detailed level .This paper describes the analysis approach and results from the first analysis stage.
Eine moderne Verkehrsinfrastruktur ist die Voraussetzung für Mobilität und wirtschaftliches Wachstum. Um in Zeiten der Globalisierung den Wirtschaftsstandort Deutschland zu sichern und auszubauen, gilt es, flexibel auf die sich rasant ändernden Rahmenbedingungen zu reagieren. Verkehr erzeugt jedoch Lärm, den die Bevölkerung mit steigender Sensibilität wahrnimmt. Leistung, Produktivität und Lebensqualität sind durch Lärm stark beeinträchtigt. Etwa 60 % der Bevölkerung in Deutschland fühlen sich durch den Straßenverkehrslärm belästigt. Die Auswirkungen des Lärms von der Beeinträchtigung der Konzentration und Kommunikation bis hin zur möglichen Schädigung der Gesundheit sind durch umfassende Studien des Umweltbundesamtes (UBA) belegt. Im Dezember 2009 wurde nach vier Jahren Forschungsarbeit das durch das Bundesministerium für Wirtschaft und Technologie (BMWi) geförderte Forschungsprojekt "Leiser Straßenverkehr 2" erfolgreich abgeschlossen. Insgesamt elf Partner aus Industrie und Forschung haben gemeinsam Lösungen erarbeitet, wie der Straßenverkehrslärm dauerhaft reduziert werden kann. Die Projektkosten wurden auf ca. 4,5 Mio. EUR veranschlagt und werden jeweils zu 50 % vom BMWi und den Forschungspartnern getragen. Der Bau der Erprobungsstrecken wird aus Baumitteln finanziert. Auf diese Weise unterstützt das Bundesministerium für Verkehr, Bau und Stadtentwicklung (BMVBS) das Projekt "Leiser Straßenverkehr 2". Einen Schwerpunkt des Projektes stellte die Entwicklung eines leiseren Lkw-Reifens für die Antriebsachse dar. In Zusammenarbeit mit dem Projektpartner Continental AG konnte im Frühjahr 2009 ein geräuschreduzierter Lkw-Reifen auf dem Markt eingeführt werden, der gegenüber dem Vorgängerprodukt um ca. 3,5 dB(A) leiser ist. Die Firma Continental AG plant, dieses neue leisere Reifenprofil auf andere Reifendimensionen zu übertragen. Darüber hinaus wurde von der Technischen Universität Hamburg-Harburg, der Leibniz Universität Hannover und der Firma Continental AG ein Berechnungsmodell zur detaillierten Simulation eines rollenden Reifens auf einer Fahrbahn, der daraus resultierenden Reifenschwingungen und der damit verbundenen Geräusche entwickelt. Erstmals steht ein derartiges Instrument für die Reifenoptimierung zur Verfügung. Eine weitere Schallreduktion wurde im Projekt angestrebt, indem die akustische Lebensdauer von offenporigen Asphalten durch Vermeidung der Verschmutzung verlängert wird. Um dies zu erreichen, wurde ein modifiziertes Bitumen entwickelt, mit dem die Schmutzanhaftung an den Hohlraumwandungen offenporiger Asphalte minimiert werden kann. Im Rahmen der Erprobung auf der Bundesautobahn A 24 bei Berlin wird derzeit geprüft, wie sich dieser modifizierte offenporige Asphalt in der Straßenbaupraxis bewährt. Darüber hinaus wurden von der Firma Müller BBM Resonatoren entwickelt, die in die offenporige Deckschicht integriert werden und aufgrund ihrer speziellen Frequenzabstimmung ein breiteres Frequenzband zur Schallreduzierung abdecken sollen. Im Juli 2009 erfolgte in einem Testabschnitt auf der Erprobungsstrecke A 24 die bautechnische Umsetzung der Ergebnisse in die Praxis. Ein weiterer Schwerpunkt im Projekt war die akustische Optimierung von Lamellen-Fahrbahnübergängen für lange Brücken. Umfangreiche Untersuchungen wurden dabei im Prüfstand Fahrzeug/Fahrbahn der BASt durchgeführt. Im Juli 2009 wurden die neuen lärmarmen Oberflächen auf einem Fahrbahnübergang auf der A 10 bei Phoeben/Havelbrücke eingebaut und zeigten im Vergleich zum Lamellen-Fahrbahnübergang ohne Rautenelemente eine lärmreduzierende Wirkung von ca. 5 dB(A). Insgesamt zeigen die Forschungsergebnisse Entwicklungspotenziale zur weiteren Schallreduktion auf. Ein zentrales Ziel weiterführender Forschungskonzepte wird es sein, neuartige lärmarme Fahrbahnbeläge zu entwickeln und technische Lösungen für die Anwendung in der Straßenbaupraxis zu finden. Darüber hinaus sollen die Simulationsmodelle erweitert und optimiert werden, damit unter Berücksichtigung verschiedener Einflüsse aus Reifen und Fahrbahn Geräuschprognosen schnell und zuverlässig möglich sind.
Auf Grundlage von gebräuchlichen und anerkannten Modellen im Kontext der Fahrzeugführung werden zentrale Konzepte identifiziert, die mögliche Ansatzpunkte von langfristigen Wirkungen von Systemen zur Erkennung des Fahrerzustands bilden. Dabei werden nicht nur klassische Mehr-Ebenen-Modelle der Fahraufgabe mit beteiligten Kontrollprozessen berücksichtigt, sondern auch weitere Blickwinkel eingenommen, die in individuellen Persönlichkeitsmerkmalen, Einstellungen oder dem Fahrstil wichtige moderierende Einflussfaktoren identifizieren. Im Rahmen eines allgemeinen Evaluationsansatzes können grundlegende Taxonomien von Bewertungsverfahren, diverse Charakterisierungen von Bewertungsdimensionen sowie wichtige und zu dokumentierende Attribute und Fragestellungen von Evaluationsuntersuchungen beschrieben werden. In diesem Rahmen werden aus den betrachteten Modellen und Konzepten Kriterien abgeleitet, Aspekte der Operationalisierung erörtert sowie methodische Erhebungsansätze vorgeschlagen und diskutiert. Die Bandbreite der betrachteten Methoden ist vielfältig und reicht von unstrukturierten Befragungen über den Einsatz standardisierter Fragebögen bis hin zur maschinellen Erfassung von fahrrelevanten Kenngrößen über fahrzeugeigene Sensorsysteme. Besondere Bedeutung für die Realisierung einer Evaluationsstudie wird möglichst realitätsnahen Erhebungsumständen beigemessen. Daher wird als Rahmenansatz ein Field Operational Test zur Integration der diversen Erhebungsverfahren vorgeschlagen.
Providing effective occupant protection in rollover crashes requires supplying the occupant with a restraint system proven effective in the dynamic rollover accident mode. Preventing ejection and providing restraint sufficient to prevent potentially injurious contacts with both interior and exterior vehicle components is paramount for effective rollover occupant protection. Research has shown that the injury potential can be decreased by closely coupling the occupant to the seat. This paper focuses on the effect of restraint system slack and its relationship to occupant excursion and ejection potential during rollover. Various restraint system configurations are evaluated in rollover-type test environments. A review of prior research is presented prior to presenting new quasi-static vehicle inversion studies conducted with live surrogate occupants. Additionally, dynamic rollover testing utilizing anthropometric test devices (ATDs) is presented. The influence of belt looseness and effects of various restraint designs on the belted occupants' injury potential are discussed.
It has been pointed that most of the accidents on the roads are caused by driver faults, inattention and low performance. Therefore, future active safety systems are required to be aware of the driver status to be able to have preventative features. This probe study gives a system structure depending on multi-channel signal processing for three modules: Driver Identification, Route Recognition and Distraction Detection. The novelty lies in personalizing the route recognition and distraction detection systems according to particular driver with the help of driver identification system. The driver ID system also uses multiple modalities to verify the identity of the driver; therefore it can be applied to future smart cars working as car-keys. All the modules are tested using a separate data batch from the training sets using eight drivers" multi-channel driving signals, video and audio. The system was able to identify the driver with 100% accuracy using speech signals of length 30 sec or more and a frontal face image. After identifying the driver, the maneuver/ route recognition was achieved with 100% accuracy and the distraction detection had 72% accuracy in worst case. In overall, system is able to identify the driver, recognize the maneuver being performed at a particular time and able to detect driver distraction with reasonable accuracy.
In-depth road traffic accident research in Spain is a fairly recent activity. In the past, only accident data that had been retrospectively processed by the national and regional traffic police forces was available. In 1999 Applus+IDIADA set up a permanent accident research unit to carry out indepth analysis of road accidents in Spain. Since then accidents involving cars, motorcycles, coaches and vulnerable road users have been thoroughly studied. The Applus+IDIADA accident research team has carried out work for the various traffic polices in Spain and it is currently involved in several research projects in which accidentology is one of the main tasks. The working methodology of the team is presented in the first part of the paper. In the framework of the European research project "Rollover" (GRD2-2001-50086), Applus+IDIADA has collected data, inspected scenarios and performed virtual reconstructions of twenty-six of the total seventy-six rollover accidents studied. The second half of the paper describes how these accident investigations were used to develop a test procedure for identifying possible improvements to the vehicle structure which augment occupant protection in a rollover scenario. In particular, a proposal for a new drop test for rollover assessment is presented. The cases were analysed for severity, in terms of injury to the occupants and damage to the vehicle, and taking into account whether a seatbelt was worn or not. The worst possible cases were identified as those that had severe occupant injuries and sizable damage to the occupant compartment when seatbelts had been worn. The most severe cases were then analysed further for impact position (roll and pitch angles) and the impact velocity. With these parameters taken into account, the most representative combinations could be found. This resulted in a series of configurations for possible drop tests. The results of the tests indicate where passenger vehicle structures need to be improved in order to increase occupant safety in the event of a rollover crash.
Mit der EU-Verordnung Nummer 661/2009 zur Typgenehmigung und allgemeinen Sicherheit von Kraftfahrzeugen wird von der EU für schwere Nutzfahrzeuge der Einbau von Spurverlassenswarnsystemen und automatischen Notbremssystemen vorgeschrieben. Mit dem obligatorischen Einbau der Systeme wird eine Reduktion der Abkommens- und Auffahrunfälle von Nutzfahrzeugen aus den Klassen M2, M3, N2 und N3, die auf Grund der hohen Masse der Fahrzeuge folgenschwer sind, erwartet. Als Einführungsdaten werden der 1. November 2013 für neue Fahrzeugtypen und der 1. November 2015 für neue Fahrzeuge genannt. Leistungsanforderungen beziehungsweise technische Spezifikationen, denen die Systeme genügen müssen, liegen jedoch noch nicht vor. Diese werden derzeit von einer Expertengruppe auf UN-ECE-Ebene entwickelt. Dabei wird versucht, technologieneutrale Beschreibungen für die Ausgestaltung der Systeme zu erstellen, die gleichzeitig sowohl den gewünschten Nutzen für die Verkehrssicherheit garantieren, sich aber auch an der derzeit vorhandenen und realisierbaren Technologie orientieren. Darüber hinaus müssen die Systemkosten in einem vernünftigen Verhältnis zum Sicherheitsnutzen stehen. Ziel ist es, im Laufe des Jahres 2011 Vorschläge für die Legislative vorzulegen. Es wird über den Stand der Arbeiten, offene Fragestellungen, Herausforderungen bei der Ausgestaltung der technischen Anforderungen sowie sich abzeichnende Ergebnisse berichtet. Dabei sind die Arbeiten in Bezug auf Lane Departure Warning Systems (LDWS) bereits weiter fortgeschritten als zu Advanced Emergency Braking Systems (AEBS).
Nutzfahrzeuge der Kategorie N1 sind Fahrzeuge mit einem maximalen zulässigen Gesamtgewicht (zGG) bis zu 3500 kg. Da für diese Fahrzeuge keine Geschwindigkeitsbegrenzung und Fahrzeiterfassung vorgeschrieben ist, sind diese Fahrzeuge sehr häufig in Unfälle involviert. Durch den großen Laderaum und die hierdurch mögliche hohe Schwerpunktlage sind die Fahrer hinsichtlich der Adaption an die Beladungszustände häufig überfordert. Um den Einfluss der Fahrdynamikregelung auf die Sicherheit von N1 Fahrzeugen aufzuzeigen wurden standardisierte Fahrmanöver mit und ohne ESP bei unterschiedlichen Beladungszuständen durchgeführt. Hierfür wurde ein Fahrzeug mit einer Stütz- und Beladungsvorrichtung sowie mit der notwendigen Sensorik zur Erfassung fahrdynamischer Kennwerte und der Bremsdrücke ausgestattet. Die Auswertung der fahrdynamischen Kenngrößen zeigte deutlich den Beladungseinfluss auf die Fahrdynamik und die Minimierung dieses Einflusses durch ein ESP System mit der Mehrwertfunktion Load Adaptiv Control. Da N1-Fahrzeuge häufig auch von wenig erfahrenen Fahrern, z. B. Ferienjobs, im Straßenverkehr bewegt werden, sollten im Rahmen dieser Studie auch Fahrversuche mit ungeübten Probanden am Fahrsimulator berücksichtigt werden, um das Sicherheitspotential des ESP für die normale Fahrerpopulation aufzuzeigen. Hierzu wurde ein echtzeitfähiges Simulationsmodell eines Sprinters in CarSim erstellt und mit den Ergebnissen der Realfahrten validiert. Die Versuche am Fahrsimulator sollten das Sicherheitspotential des ESP bei der durchschnittlichen Fahrerpopulation aufzeigen. Hierzu wurden sowohl die im Realversuch durchgeführten standardisierten Fahrmanöver als auch Szenarien wie Ausweichmanöver, Teststreckenfahrt etc. nachgebildet. Insbesondere bei plötzlich auftauchenden Hindernissen hat sich der Vorteil des ESP deutlich gezeigt. Auch die Vorteile der Lasterkennung für das Regelverhalten des ESP wurde nachgewiesen.