91 Fahrzeugkonstruktion
Filtern
Erscheinungsjahr
Dokumenttyp
Sprache
- Englisch (159) (entfernen)
Schlagworte
- Conference (89)
- Konferenz (86)
- Germany (54)
- Deutschland (53)
- Safety (49)
- Sicherheit (48)
- Accident (44)
- Unfall (44)
- Anfahrversuch (41)
- Fahrzeug (38)
- Bewertung (37)
- Evaluation (assessment) (37)
- Vehicle (36)
- Impact test (veh) (33)
- Injury (28)
- Simulation (28)
- Verletzung (28)
- Active safety system (27)
- Aktives Sicherheitssystem (26)
- Fußgänger (26)
- Passives Sicherheitssystem (26)
- Pedestrian (26)
- Collision (25)
- Fahrerassistenzsystem (24)
- Test method (24)
- Unfallrekonstruktion (24)
- Passive safety system (23)
- Prüfverfahren (23)
- Schweregrad (Unfall, Verletzung) (23)
- Accident prevention (22)
- Analyse (math) (22)
- Severity (accid, injury) (22)
- Zusammenstoß (22)
- Analysis (math) (21)
- Car (21)
- Driver assistance system (21)
- Test (21)
- Unfallverhütung (21)
- Verletzung) (21)
- Versuch (21)
- injury) (21)
- Frontalzusammenstoß (20)
- Schweregrad (Unfall (20)
- Severity (accid (20)
- Head on collision (19)
- Leistungsfähigkeit (allg) (19)
- Anthropometric dummy (17)
- Efficiency (17)
- Dummy (16)
- Reconstruction (accid) (16)
- Datenbank (15)
- Kompatibilität (15)
- Compatibility (14)
- Data bank (12)
- Method (12)
- Pkw (12)
- Verfahren (12)
- Child (11)
- Insasse (11)
- Kind (11)
- On the spot accident investigation (11)
- Radfahrer (11)
- Statistics (11)
- Cyclist (10)
- Development (10)
- Entwicklung (10)
- Forschungsarbeit (10)
- Statistik (10)
- Vehicle regulations (10)
- Biomechanics (9)
- Biomechanik (9)
- Europa (9)
- Europe (9)
- Improvement (9)
- Prevention (9)
- Research project (9)
- Seitlicher Zusammenstoß (9)
- Technische Vorschriften (Kraftfahrzeug) (9)
- Untersuchung am Unfallort (9)
- Vehicle occupant (9)
- Verbesserung (9)
- Accident reconstruction (8)
- Antikollisionssystem (8)
- Collision avoidance system (8)
- Deformation (8)
- Impact test (8)
- Motorrad (8)
- Side impact (8)
- Auffahrunfall (7)
- Automatisch (7)
- Cost benefit analysis (7)
- Fahrzeugsitz (7)
- Fatality (7)
- Fehler (7)
- Head (7)
- Interior (veh) (7)
- International (7)
- Kopf (7)
- Lorry (7)
- Motorcycle (7)
- PKW (7)
- Schlag (7)
- Shock (7)
- Sicherheitsgurt (7)
- Standardisierung (7)
- Tödlicher Unfall (7)
- Verformung (7)
- Verminderung (7)
- Wirtschaftlichkeitsrechnung (7)
- Automatic (6)
- Bemessung (6)
- Benutzung (6)
- Braking (6)
- Bremsung (6)
- Cause (6)
- Datenerfassung (6)
- Decrease (6)
- Deformierbare Barriere (Anpralltest) (6)
- Design (overall design) (6)
- Driver (6)
- Error (6)
- Fahrer (6)
- Fahrzeuginnenraum (6)
- Geschwindigkeit (6)
- Gesetzgebung (6)
- Knee (human) (6)
- Legislation (6)
- Mathematical model (6)
- Prognose (6)
- Rear end collision (6)
- Rechenmodell (6)
- Research report (6)
- Risiko (6)
- Risk (6)
- Safety belt (6)
- Seat (veh) (6)
- Sensor (6)
- Speed (6)
- Ursache (6)
- Use (6)
- Verhütung (6)
- Überschlagen (6)
- Airbag (5)
- Aufprallschlitten (5)
- Autonomes Fahren (5)
- Autonomous driving (5)
- Body (car) (5)
- Brustkorb (5)
- Data acquisition (5)
- Fahrstabilität (5)
- Forschungsbericht (5)
- Impact sled (5)
- Karosserie (5)
- Lkw (5)
- Standardization (5)
- Thorax (5)
- Vehicle handling (5)
- Accident rate (4)
- Alte Leute (4)
- Anti locking device (4)
- Bus (4)
- Cervical vertebrae (4)
- Deformable barrier (impact test) (4)
- Digital model (4)
- EU (4)
- Electronic stability program (4)
- Forecast (4)
- Halswirbel (4)
- Interview (4)
- Japan (4)
- Knie (menschl) (4)
- Modification (4)
- Numerisches Modell (4)
- Official approval (4)
- Overturning (veh) (4)
- Perception (4)
- Reproducibility (4)
- Reproduzierbarkeit (4)
- Road user (4)
- Technologie (4)
- Technology (4)
- USA (4)
- Unfallhäufigkeit (4)
- Verkehrsteilnehmer (4)
- Wahrnehmung (4)
- Air bag (restraint system) (3)
- Antiblockiereinrichtung (3)
- Bein (menschl) (3)
- Belastung (3)
- Berechnung (3)
- Coach (3)
- Correlation (math, stat) (3)
- Damage (3)
- Database (3)
- Detection (3)
- Elektronisches Stabilitätsprogramm (3)
- Ergonomics (3)
- Fire (3)
- Front (3)
- Gewicht (3)
- Human body (3)
- Impact study (3)
- Kamera (3)
- Knotenpunkt (3)
- Korrelation (math, stat) (3)
- Kunststoff (3)
- Leg (human) (3)
- Lenken (Fahrzeug) (3)
- Load (3)
- Menschlicher Körper (3)
- Motorcyclist (3)
- Motorradfahrer (3)
- Old people (3)
- Plastic material (3)
- Policy (3)
- Politik (3)
- Reisebus (3)
- Sachschaden (3)
- Sichtbarkeit (3)
- Steering (process) (3)
- Straßenverkehrsrecht (3)
- Veränderung (3)
- Sichtbarkeit (3)
- Weight (3)
- Windschutzscheibe (3)
- Abdomen (2)
- Activity report (2)
- Advanced driver assistance system (2)
- Age (2)
- Alter (2)
- Attitude (psychol) (2)
- Ausrüstung (2)
- Automatische Notbremsung (2)
- Autonomes Fahrzeug (2)
- Autonomous emergency braking (2)
- Autonomous vehicle (2)
- Baumusterzulassung (2)
- Behaviour (2)
- Bildschirm (2)
- Bremse (2)
- Bremsweg (2)
- Calculation (2)
- Camera (2)
- Crash Test (2)
- Crashtest (2)
- Delivery vehicle (2)
- Detektion (2)
- Driver information (2)
- Driving (veh) (2)
- Dynamics (2)
- Dynamik (2)
- EU directive (2)
- EU-Richtlinie (2)
- Effectiveness (2)
- Einstellung (psychol) (2)
- Electric vehicle (2)
- Electronic driving aid (2)
- Elektrofahrzeug (2)
- Empfindlichkeit (2)
- Entdeckung (2)
- Equipment (2)
- Erste Hilfe (2)
- Estimation (2)
- Fahrdatenschreiber (2)
- Fahrzeugführung (2)
- Feuer (2)
- First aid (2)
- Form (2)
- France (2)
- Frankreich (2)
- Frau (2)
- Haftung (jur) (2)
- Head restraint (2)
- Headlamp (2)
- Intersection (2)
- Knie (2)
- Kopfstütze (2)
- Kraftfahrzeug (2)
- LKW (2)
- Leuchtdichte (2)
- Liability (2)
- Location (2)
- Luminance (2)
- Measurement (2)
- Mensch Maschine Verhältnis (2)
- Messung (2)
- Norm (tech) (2)
- Occupant (veh) (2)
- Organisation (2)
- Ort (Position) (2)
- Passenger (2)
- Post crash (2)
- Prototyp (2)
- Prototype (2)
- Rear view mirror (2)
- Regression analysis (2)
- Regressionsanalyse (2)
- Reifen (2)
- Restraint system (2)
- Risikobewertung (2)
- Risk assessment (2)
- Rückspiegel (2)
- Scheinwerfer (2)
- Schutz (2)
- Schweden (2)
- Seite (2)
- Sensitivity (2)
- Side (2)
- Spain (2)
- Spanien (2)
- Specification (standard) (2)
- Spinal column (2)
- Steifigkeit (2)
- Stiffness (2)
- Sustainability (2)
- Toxicity (2)
- Toxizität (2)
- Traffic regulations (2)
- Tyre (2)
- Tätigkeitsbericht (2)
- Underride protection (2)
- United Kingdom (2)
- Unterfahrschutz (2)
- Unterleib (2)
- Untersuchung am unfallort (2)
- Vereinigtes Königreich (2)
- Verhalten (2)
- Visual display (2)
- Vorn (2)
- Windscreen (veh) (2)
- Wirbelsäule (2)
- Wirksamkeitsuntersuchung (2)
- Zusammenstoss (2)
- Ablenkung (psychol) (1)
- Accuracy (1)
- Active safety (1)
- Active safety system; Automatic; Brake; Car; Collision avoidance system; Conference; Driver assistance system; Germany; Impact test (veh); Rear end collision; Severity (accid (1)
- Administration (1)
- Adult (1)
- Advanced vehicle control systems (1)
- Aged people (1)
- Airbag (restraint system) (1)
- Aktive Sicherheit (1)
- Angle (1)
- Anordnung (1)
- Antiblockiersystem (1)
- Antikollisisonssystem (1)
- Apparatus (measurement) (1)
- Arbeitsgruppe (1)
- Atives Sicherheitssystem (1)
- Aufzeichung (1)
- Austria (1)
- Autobahn (1)
- Battery (1)
- Bau (1)
- Baustoff (1)
- Befreiung (Bergung) (1)
- Bewehrung (1)
- Bicycle (1)
- Bicyclist (1)
- Blickfeld (1)
- Blind spot (veh) (1)
- Brake (1)
- Brake light (1)
- Braking distance (1)
- Brand (1)
- Bremslicht (1)
- Bruch (mech) (1)
- Budget (1)
- Calibration (1)
- Chassis (1)
- Classification (1)
- Clothing (1)
- Collision test (veh) (1)
- Compatiblity (1)
- Compression (1)
- Computation (1)
- Construction (1)
- Contact (tyre (1)
- Cost (1)
- Crash test (1)
- Cross roads (1)
- Crossing the road (pedestrian) (1)
- Damping (1)
- Data collection (1)
- Dauer (1)
- Dauerhaftigkeit (1)
- Daylight (1)
- Deformable barrier (Impact test) (1)
- Deformable barrier system (impact test) (1)
- Dehnungsmessstreifen (1)
- Demand (econ) (1)
- Deutschland ; Konferenz (1)
- Diesel engine (1)
- Dieselmotor (1)
- Digital computer (1)
- Digitalrechner (1)
- Displacement (1)
- Distraction (1)
- Driver training (1)
- Driving aid (electronic) (1)
- Dtetection (1)
- Durability (1)
- Dynamic penetration test (1)
- Dynamo (1)
- Dämpfung (1)
- Education (1)
- Eichung (1)
- Eins (1)
- Ejection (1)
- Electric bicycle (1)
- Elektrofahrrad (1)
- Elektronisches Stabilitätsprogram (1)
- Emergency (1)
- Engine capacity (1)
- Environment protection (1)
- Ergonomie (1)
- Erwachsener (1)
- Erziehung (1)
- Eu (1)
- European New Car Assessment Programme (1)
- Event data recorder (Road vehicle) (1)
- Event data recorder (road vehicle) (1)
- Extrication (1)
- Fahrassistenzsystem (1)
- Fahrausbildung (1)
- Fahrbahnüberquerung (1)
- Fahrerinformationen (1)
- Fahrleistung (1)
- Fahrrad (1)
- Fahrstreifenwechsel (1)
- Fahrwerk (1)
- Fahrzeugbeleuchtung (1)
- Fahrzeugdach (1)
- Fahrzeugflotte (1)
- Fahrzeugteil (Sicherheit) (1)
- Failure (1)
- Field of vision (1)
- Finite element method (1)
- Fleet of vehicles (1)
- Future transport mode (1)
- Gas (1)
- Geometry (shape) (1)
- Government (national) (1)
- Grenzwert (1)
- Harmonization (1)
- Head (human) (1)
- Height (1)
- Herausschleudern (1)
- Hinten (1)
- Homogeneity (1)
- Homogenität (1)
- Hubraum (1)
- Höhe (1)
- Hüfte (menschl) (1)
- In Bewegung (1)
- Incident detection (1)
- Increase (1)
- Inertia reel safety belt (1)
- Injury) (1)
- Installation (1)
- Intelligent transport system (1)
- Intelligentes Verkehrssystem (1)
- Itinerary (1)
- Junction (1)
- Klassifizierung (1)
- Kleidung (1)
- Kleintransporter (1)
- Kompatiblität (1)
- Kontakt Reifen Straße (1)
- Kontrolle (1)
- Kopf (menschl) (1)
- Kosten (1)
- Kosten Nutzen Vergleich (1)
- Kreuzung (1)
- Landstraße (1)
- Lane changing (1)
- Lap strap (1)
- Lateral collision (1)
- Layout (1)
- Leistungsfähigkeit (Allg.) (1)
- Lieferfahrzeug (1)
- Limit (1)
- Maintenance (1)
- Market (1)
- Markt (1)
- Massenunfall (1)
- Material (constr) (1)
- Matrix (1)
- Messgerät (1)
- Methode der finiten Elemente (1)
- Mobility (1)
- Mobilität (1)
- Model (not math) (1)
- Modell (1)
- Montage (1)
- Moped (1)
- Motorway (1)
- Moving (1)
- Multiple collision (1)
- Nachfrage (1)
- Nachhaltige Entwicklung (1)
- Nachhaltigkeit (1)
- Nacht (1)
- Nasse Straße (1)
- Nigeria (1)
- Night (1)
- Notfall (1)
- Oberfläche (1)
- On the scene accident investigation (1)
- One (1)
- Optimum (1)
- Organization (1)
- Output (1)
- Overlapping (1)
- Overturning (1)
- Pelvis (1)
- Pfahl (1)
- Pile (1)
- Portugal (1)
- Probability (1)
- Prüefverfahren (1)
- Public transport (1)
- Rammsondierung (1)
- Rear (1)
- Recording (1)
- Reduction (decrease) (1)
- Reflectorized material (1)
- Reflexstoffe (1)
- Regierung (staat) (1)
- Reifenprofil (1)
- Reinforcement (in mater) (1)
- Reiseweg (1)
- Richtlinien (1)
- Rippe (menschl) (1)
- Road construction (1)
- Road traffic (1)
- Robot (1)
- Roboter (1)
- Roll over (veh) (1)
- Roof (veh) (1)
- Rotation (1)
- Rural road (1)
- Safety fence (1)
- Safety glass (1)
- Safety harness (1)
- Safety system (1)
- Schulter (1)
- Schutzeinrichtung (1)
- Schweregrad /Unfall (1)
- Seat (1)
- Seat belt (1)
- Seat harness (1)
- Severity (accid, injuy) (1)
- Shape (1)
- Shoulder (human) (1)
- Sicherheitsglas (1)
- Social factors (1)
- Soziale Faktoren (1)
- Specifications (1)
- Spreading (1)
- Stadardization (1)
- Stadt (1)
- Stand der Technik (Bericht) (1)
- State of the art report (1)
- Stochastic process (1)
- Stochastischer Prozess (1)
- Stopping distance (1)
- Strain gauge (1)
- Straßenbau (1)
- Straßenverkehr (1)
- Störfallentdeckung (1)
- Surface (1)
- Surveillance (1)
- Sweden (1)
- Tageslicht (1)
- Technische Vorschriften (1)
- Telefon (1)
- Telematics (1)
- Telematik (1)
- Telephone (1)
- Tension (1)
- Time (1)
- Toter Winkel (1)
- Traffic (1)
- Traffic engineering (1)
- Traffic regulation (1)
- Train (1)
- Transport infrastructure (1)
- Typenzulassung (1)
- Tyre tread (1)
- Umweltschutz (1)
- Unfallfolgemaßnahme (1)
- Unfallfolgephase (1)
- Unfallverhuetung (1)
- Unfallverhütug (1)
- United kingdom (1)
- Unterhaltung (1)
- Untersuchung am Umfallort (1)
- Urban area (1)
- Usa (1)
- Vehicle lighting (1)
- Vehicle mile (1)
- Vehicle safety (1)
- Vehicle safety device (1)
- Veraenderung (1)
- Vereinigtes Königreichl (1)
- Vergrößerung (1)
- Verkehr (1)
- Verkehrsinfrastruktur (1)
- Verkehrstechnik (1)
- Vermeidung (1)
- Verschiebung (1)
- Versuchspuppe (1)
- Verteilung (mater) (1)
- Verwaltung (1)
- Video camera (1)
- Vorne (1)
- Wahrscheinlichkeit (1)
- Wet road (1)
- Window (veh) (1)
- Winkel (1)
- Wirkungsanalyse (1)
- Woman (1)
- Women (1)
- Working group (1)
- Zeit (1)
- Zug (Eisenbahn) (1)
- Zug (mech) (1)
- Zukünftiges Verkehrsmittel (1)
- Zulassung (tech) (1)
- Zusammendrückung (1)
- ZusammenstoÃüï-¿-½Ãƒ-¯Ã‚-¿Ã‚-½ (1)
- efficiency (1)
- head (1)
- road) (1)
- Öffentlicher Verkehr (1)
- Österreich (1)
- Überdeckung (1)
Institut
Rollovers continue to be a major source of heavy truck fatalities when compared to other accident modes. Real world rollover accidents are analyzed and two distinct damage patterns are identified. Damage to heavy truck roofs can occur from lateral loading that transitions to vertical roof loading as the vehicle rolls onto its side and then over onto its roof. A second load path can occur when the vehicle has rolled onto its side and furrows into the ground generating large longitudinal friction forces between the roof and ground. A review of the previous literature and various test methodologies are presented. A sled impact test methodology is presented which allows for structural assessment of a heavy truck cab's crashworthiness in both of these loading environments. Two test series are presented using the sled impact test methodology in order to analyze real world truck rollovers using varying impact platen and contact angles. The structural deformation and failure patterns were found to be consistent with damage seen in real world accident vehicles. In each case, a second equivalent truck cab was then reinforced and tested under similar conditions to evaluate the energy management and crush resistance of a stronger cab structure. These structural reinforcements demonstrated a substantial reduction in roof crush and protected the survival space of the occupant compartment. The sled impact test procedure is an effective method for testing the structural performance of a heavy truck cab in a variety of loading scenarios comparable to real world accidents and ascertaining the load and energy load levels in these accident modes.
The "Autonomous driving on the roads of the future: Villa Ladenburg Project" by the Daimler und Benz-Stiftung looks at degrees of automation that will only become technically feasible in the distant future. The treatment of the legal questions in the present chapter therefore draws heavily on the description of the use cases, which begin to provide a concrete basis for evaluating individual issues. Uncertainties in predicting future technical developments can be expected and will have a commensurate impact on the assumptions and conclusions of this chapter. The resulting uncertainty is nevertheless unavoidable if one wants to press ahead with important interrelated issues. This chapter is therefore intended as a contribution to the debate on societal aspects of automated driving from a legal perspective and not as a legalistic evaluation of the subject. The consideration will largely focus on the situation within the context of current German law. The legal views expressed are those of the author and are based on nine years of experience in the field of driver assistance system research. In terms of the underlying conception presented here, the societal dimension of autonomous vehicles addressed in the present project goes well beyond the adjustments to the legal framework currently being called for in Germany. The following will examine the question of "societal acceptance" in the context of the legal questions raised by autonomous vehicles. This line of investigation is not immediately obvious and covers only a segment of the more thoroughgoing focus of the project.
For the assessment of vehicle safety in frontal collisions compatibility (which consists of self and partner protection) between opponents is crucial. Although compatibility has been analysed worldwide for over 10 years, no final assessment approach has been defined to date. Taking into account the European Enhanced Vehicle safety Committee (EEVC) compatibility and the final report to the steering committee on frontal impact [Faerber 2007] and the FP5 VC-COMPAT[Edwards 2007] project activities, two test approaches were identified as the most promising candidates for the assessment of compatibility. Both are composed of an off-set and a full overlap test procedure. In addition another procedure (a test with a moving deformable barrier) is getting more attention in current research programmes. The overall objective of the FIMCAR project is to complete the development of the candidate test procedures and propose a set of test procedures suitable for regulatory application to assess and control a vehicle- frontal impact and compatibility crash safety. In addition an associated cost benefit analysis will be performed. In the FIMCAR Deliverable D 3.1 [Adolph 2013] the development and assessment of criteria and associated performance limits for the full width test procedure were reported. In this Deliverable D3.2 analyses of the test data (full width tests, car-to-car tests and component tests), further development and validation of the full width assessment protocol and development of the load cell and load cell wall specification are reported. The FIMCAR full-width assessment procedure consists of a 50 km/h test against the Full Width Deformable Barrier (FWDB). The Load Cell Wall behind the deformable element assesses whether or not important Energy Absorbing Structures are within the Common Interaction Zone as defined based on the US part 581 zone. The metric evaluates the row forces and requires that the forces directly above and below the centre line of the Common Interaction Zone exceed a minimum threshold. Analysis of the load spreading showed that metrics that rely on sum forces of rows and columns are within acceptable tolerances. Furthermore it was concluded that the Repeatability and Reproducibility of the FWDB test is acceptable. The FWDB test was shown to be capable to detect lower load paths that are beneficial in car-to-car impacts.
For the assessment of vehicle safety in frontal collisions compatibility (which consists of self and partner protection) between opponents is crucial. Although compatibility has been analysed worldwide for over 10 years, no final assessment approach has been defined to date. Taking into account the European Enhanced Vehicle safety Committee (EEVC) compatibility and frontal impact working group (WG15) and the FP5 VC-COMPAT project activities, two test approaches have been identified as the most promising candidates for the assessment of compatibility. Both are composed of an off-set and a full overlap test procedure. In addition another procedure (a test with a moving deformable barrier) is getting more attention in current research programmes. The overall objective of the FIMCAR project is to complete the development of the candidate test procedures and propose a set of test procedures suitable for regulatory application to assess and control a vehicle- frontal impact and compatibility crash safety. In addition an associated cost benefit analysis should be performed. The objectives of the work reported in this deliverable were to review existing full-width test procedures and their discussed compatibility metrics, to report recent activities and findings with respect to full-width assessment procedures and to assess test procedures and metrics. Starting with a review of previous work, candidate metrics and associated performance limits to assess a vehicle- structural interaction potential, in particular its structural alignment, have been developed for both the Full Width Deformable Barrier (FWDB) and Full Width Rigid Barrier (FWRB) tests. Initial work was performed to develop a concept to assess a vehicle- frontal force matching. However, based on the accident analyses performed within FIMCAR frontal force matching was not evaluated as a first priority and thus in line with FIMCAR strategy the focus was put on the development of metrics for the assessment of structural interaction which was evaluated as a first priority.
The term driver assistance systems in the chapter title shall be understood to include vehicle automation. This chapter starts with a homogeneous and consistent classification and nomenclature of all kinds of driver assistance systems known and under discussion today (including vehicle automation). It thereby builds upon familiar classification schemes by the German Federal Highway Research Institute (BASt) and the standardization body SAE international. Detailed evaluation of the German legal situation for driver assistance systems and vehicle automation is provided in the following Sect. 2. In Sect. 3, an overview is given on the legal system in the US to reveal aspects relevant for vehicle automation. This is intended as initial information for those not acquainted to the US legal system which has been the first to regulate automation in several federal states. Finally, in Sect. 4, the current rating scheme of the European New Car Assessment Programme (EuroNCAP) is presented in comparison to legal instruments. The model of a consumer protection based approach proves to be a flexible instrument with great advantages in promoting new technologies. Technical vehicle regulations on the other hand rule minimum requirements. Both approaches are needed to achieve maximum vehicle safety.
Although the bus belongs to the safest traffic means, single accidents can be particularly severe and concern many passengers. Especially in case of fires a high number of injured and killed persons can be the outcome. Fire safety of buses therefore is of high importance. With the increase of synthetic and plastic materials as a material for the interior equipment of buses and coaches because of their ood mechanical properties combined with low weight, the question arises whether the safety level has decreased in case of a fire during the last years - also compared to other means of transport. Because of the combustible plastics and their ability to release a high amount of heat the main fire load in buses is no longer the fuel but the plastic materials which are also often easy to ignite. Besides the flammability of the equipments, the production of smoke, the smoke development and propagation and its toxicity for the people as well as the testing methods and limit values are of interest. For those reasons research projects were initiated on behalf of the German Federal Highway Research Institute. At the one hand the fire behavior of coach interiors was examined in general focusing on fire propagation as well as fire detection and signalling. As result, recommendations with regard to early fire detection systems for the engine compartments and on-board extinguishing equipment were elaborated. At the other hand research is carried out to examine heat release, smoke, smoke propagation and its toxicity due to burning bus interior materials. The paper describes which effective and economically reasonable fire safety requirements for interiors of buses would improve the current situation. Proposals for amendments of current requirements are recommended including the specification of appropriate limit values. In particular, it is taken into consideration which reasonable fire safety standards from other transport sectors, especially the rail sector, should be transferred to buses.
For the assessment of vehicle safety in frontal collisions, the crash compatibility between the colliding vehicles is crucial. Compatibility compromises both the self protection and the partner protection properties of vehicles. For the accident data analysis, the CCIS (GB) and GIDAS (DE) in-depth data bases were used. Selection criteria were frontal car accidents with car in compliance with ECE R94. For this study belted adult occupants in the front seats sustaining MAIS 2+ injuries were studied. Following this analysis FIMCAR concluded that the following compatibility issues are relevant: - Poor structural interaction (especially low overlap and over/underriding) - Compartment strength - Frontal force mismatch with lower priority than poor structural interaction In addition injuries arising from the acceleration loading of the occupant are present in a significant portion of frontal crashes. Based on the findings of the accident analysis the aims that shall be addressed by the proposed assessment approach were defined and priorities were allocated to them. The aims and priorities shall help to decide on suitable test procedures and appropriate metrics. In general it is anticipated that a full overlap and off-set test procedure is the most appropriate set of tests to assess a vehicle- frontal impact self and partner protection.
New vehicle types are extensively tested to check almost all factors that influence ride and handling. With reference to the Association of German Car Tuners" (VDAT e.V.) valuations, approximately 10% of all cars in Germany are being modified by their owners. 28 % of those modifications" sales are divergent wheel-tire combinations, 13 % are tuning measures on the chassis suspension or wheel spacers. In almost all cases the singular modifications present a general permission for specific vehicles they have been tested in. Combined tuning measures, however, are often checked by just one inspector, following a procedure of mostly subjective assessment criteria. Today, critical attributes are only being observed, in case a vehicle is involved in an accident and the modifications are identified as crash causal factors or as a cofactor on the development of a crash. For the first time, a field study allows a survey of safety affecting chassis modifications. The test layout has to comply with some basic conditions. Different vehicle concepts with a wide margin of modifications are required to get a high transferability of the results. A total amount of more than 150 tested vehicles serves the same purpose. The tests are limited concerning the installation time of measurement techniques and the requirement that no damage, defilement or immoderate wear of the vehicles are accepted by their owners. Due to such factors as well as the driver Ìs acceptance, the vehicles are controlled by its owners instead of robots or test drivers. For keeping down the driver- influence, the lane has narrow boundaries and the driver has to drive in strictly adherence to the given instructions. After gathering all modifications, as well as static and kinematic parameters like the toe and camber angle, dynamic testing of predominantly lateral dynamics is conducted. Besides standardized tests like the ISO 3888-2 (Obstacle Avoidance) or the ISO 14512 (Braking on Surfaces with Split Coefficient of Friction), to test the influence of modified kingpin offsets caused by wheel spacers, some deviant tests are conducted. Those are required due to the demand of objective test results for road tests with vertical induced stimulation of the chassis suspension. Hence, new tests on corner braking with and without vertical stimulation have been developed. The interpretation of data includes thresholds, e.g. the maximum entrance velocity without hitting cones, on the one hand, and the analysis of characteristics of data concerning time and frequency range, "1-second values" and peak response times on the other hand. Besides the thresholds as indicators for the achievable velocities, which are mainly affected by friction coefficients, the vehicle reaction in the course of time characterizes the vehicle reaction in the threshold range and consequently the operational demands on the driver. The field study has started and promises the first long-range analysis of chassis modifications. The results offer a basis for hypothesis and resultant further test layouts for oncoming studies of the identified critical tuning measures.
Today's volumes of traffic require more and more responsibility from each individual road user in their interactions. Those who drive motor vehicles have the singular obligation to minimise the risk of accidents and hence the severity of injuries, particularly with a view to the most vulnerable road users such as motor bikes, bikes and pedestrians. Since responsible and pro-active driving depends first and foremost on the visual information relayed by our eyes and the visual channel this requires good command of the traffic and all-round visibility from our driver's seat. Granted that human error can never be fully excluded, improving visibility around the car is nevertheless an urgent priority. To do so, we need to rate visibility in the most realistic driving situations. Since the existing visibility metrics and methodology are not applicable to real-life driving situations, this study aimed at developing a new visibility rating methodology based on real-life accident scenarios. On the basis of the cases documented by the accident research project, this study analysed criteria indicative of diminishing visibility on the one hand and revealing some peculiarities in connection with the visibility issue on the other. Based on the above, the project set out to develop a rating methodology allowing to assess all-round visibility in various road situations taking into account both driver and road geometries. In this context, the assessment of visibility while turning a corner, crossing an intersection and joining traffic on a major road (priority through route) is of major importance. The first tests have shown that critical situations can be avoided by adapting the relevant geometries and technical solutions and that significant improvements of road safety can be derived therefrom.
The paper gives an overview of the recent (mostly 2012) figures of killed bus/coach occupants (drivers and passengers) in 27 Member States of the European Union as reported by CARE. The Evolution of the figures of bus/coach occupants killed in road accidents urban, rural without motorway and on motorways from 1991 to 2010 in 15 Member States of the EU supplements this information. More detailed are the figures reported for Germany by the Federal Statistics. The paper displays long-term evaluations (1957 to 2012) for killed, seriously and slightly injured occupants in all kinds of buses/coaches. Midterm evaluations (1995 to 2012) of the figures of fatalities and casualties are displayed for different busses according to their identification of road using as coaches, urban buses, school buses, trolley buses and "other buses". To be able to compare the evolutions of the safety of vehicle occupants it is customary to use different risk indicators. Calculations and illustrations for three often used indicators with their development over time are given: fatalities, seriously injured and slightly injured per 100,000 vehicles registered, per 1 billion (109) vehicle-kilometres travelled and per 1 billion (109) person-kilometres. These indicators are shown for occupants of cars, goods vehicles and buses/coaches. For the period from 1957 until 2012 it is obvious, that for all three vehicle categories analysed there was a clear long-term trend towards more occupant safety in terms of casualties per vehicles registered and per vehicle mileage. This was most significant for car occupants but it can be seen for bus/coach occupants and goodsvehicle occupants as well. Figures of killed occupants and of casualties related to person-kilometres are calculated and displayed for the shorter period 1995 to 2012. Here it becomes obvious that the bus/coach is still the safest mode of transport for the occupants of road vehicles. Graphs for the casualty risk indices still show significantly higher risks for car occupants despite the corresponding curve moved sustainable downwards. It is remarkable, that the risks of being killed or injured for the occupants of urban buses is growing whereas the corresponding risk for the occupants of coaches in line traffic tends downwards. The article ends with a short comparison and discussion of the risk indicators which are actually published for the occupants (driver and passengers) of cars and the passengers of buses/coaches, railroads, trams and airplanes. The interpretation of such information depends on the perception and it seems that for a complete view not only one indicator should be used and the evolutions of the indicator values during longer periods (as displayed with examples in the paper) should also be taken into account.