Filtern
Erscheinungsjahr
Dokumenttyp
- Buch (Monographie) (224)
- Wissenschaftlicher Artikel (89)
- Konferenzveröffentlichung (82)
- Bericht (11)
- Arbeitspapier (11)
- Teil eines Buches (Kapitel) (5)
- Sonstiges (1)
Sprache
- Deutsch (355)
- Englisch (67)
- Mehrsprachig (1)
Schlagworte
- Bewertung (423) (entfernen)
Institut
Auf Initiative des Bundesministeriums für Verkehr, Bau und Stadtentwicklung wird die Kampagne "Runter vom Gas!" seit Dezember 2011 mit verändertem Konzept und neuen Kommunikationsinhalten fortgeführt. Die neuen Plakatmotive und andere Medien sprechen nunmehr neben dem Hauptthema der nicht angepassten Fahrgeschwindigkeiten ein breites Spektrum weiterer problematischer Verhaltensweisen im Straßenverkehr an. Im Rahmen des Evaluationsprojekts wurde zum einen die Medienresonanz auf die aktuelle Kampagnenfortsetzung untersucht. Die Auswertung thematischer Berichte ergab ein mit früheren Wellen vergleichbares Medienecho, wobei sich die Medien mit Bewertungen zurückhielten. Die größere thematische Breite der Kampagne wurde dagegen recht intensiv in den Berichten wiedergegeben. Die Medienresonanz fällt damit insgesamt verhalten-positiv aus, erreicht aber nicht ganz das Niveau früherer Kampagnenwellen, bei denen insbesondere die Furchtappell-Motive viel Berichterstattung angeregt hatten. Zudem wurden in einer repräsentativen Umfrage die Bekanntheit der Kampagne und das Problembewusstsein der Bevölkerung untersucht. Die Befunde zeigen, dass eine Aktualisierung der Bekanntheit von "Runter vom Gas!" in der Bevölkerungsbreite gelungen ist. Auch erhalten die neuen Motive positive Bewertungen. Andererseits erweist sich die neue Argumentation über soziale Verantwortung für Mitmenschen als schwieriger verständlich und scheint gerade bei der Risikogruppe der jungen Fahrer nicht optimal "anzukommen". Aus den Befunden der beiden Studien wird eine Reihe von Handlungsempfehlungen abgeleitet, insbesondere eine gestalterische Weiterentwicklung hin zu mehr Aktivierung oder Betroffenheit, eine stärkere Nutzung von Online-Kanälen, ein Ausbau der erfolgreichen Sonderaktionen ("Below the line") sowie eine Ausdifferenzierung der Kampagnenarchitektur hin zu eigenständig konzipierten Sub-Kampagnen für spezifische Risikogruppen und -themen.
Aus einer aktuellen BASt-Studie ("Legalbewährung nach Neuerteilung der Fahrerlaubnis") geht hervor, dass eine Fahrerlaubnisentziehung bei mehrfach verkehrsauffälligen Fahrern nicht unbedingt zur Verhaltensänderung führt: Personen, denen der Führerschein wegen Überschreitens der Punktegrenze entzogen wurde, bergen ein doppelt so hohes Risiko, schuldhaft einen Unfall zu verursachen, wie Personen, deren Fahrerlaubnis wegen Alkohol- oder Drogenkonsums entzogen wurde. Eine Interventionsmaßnahme im Rahmen des Punktsystems stellt ein Hilfsangebot dar, das Fahrerlaubnisinhabern die Möglichkeit gibt, ihr riskantes Fahrverhalten mit professioneller Unterstützung langfristig zu verändern, um zukünftig regelkonform am Straßenverkehr teilzunehmen. Eine Interventionsmaßnahme kann damit einen wichtigen Beitrag zur Reduktion des Unfallrisikos von mehrfach verkehrsauffälligen Fahrern und damit zur Erhöhung der Verkehrssicherheit leisten. Für die bisherigen Aufbauseminare für Punkteauffällige (ASP) konnte kein Wirksamkeitsnachweis erbracht werden. Aus wissenschaftlicher Sicht wurde der den Aufbauseminaren zugrunde liegende Moderationsansatz kritisch hinterfragt. So geht aus einem Gutachten über die Qualität der Aufbauseminare hervor, dass Zweifel bestehen, dass das Ziel der Einstellungsänderung verkehrsauffälliger Fahrer mit dem zugrundeliegenden Ansatz erreicht werden kann. Vor diesem Hintergrund wurde die BASt im Rahmen der Reform des Verkehrszentralregisters vom Bundesministerium für Verkehr, Bau und Stadtentwicklung (BMVBS) im Juni 2012 beauftragt, die Grundlagen für ein wissenschaftlich begründetes Konzept für eine neue, wirksame Interventionsmaßnahme (Fahreignungsseminar, FES) für Punkteauffällige vorzulegen. Die Grundlagen zum Fahreignungsseminar wurden in drei Forschungsprojekten erarbeitet. Diese werden im vorliegenden Bericht dargestellt. Teil 1: Optimierung der Interventionsmaßnahmen im Rahmen der Reform des Mehrfachtäter-Punktsystems. Teil 2: Konzeption einer edukativen Teilmaßnahme der Fahreignungsseminare für verkehrsauffällige Kraftfahrer. Teil 3: Entwicklung eines Rahmenlehrplans für den edukativen Teil des im Rahmen der Reform des Punktsystems geplanten Fahreignungsseminars.
Since integrated safety systems combine active and passive safety elements in one safety system, it is necessary to define new procedures to evaluate vehicle safety from the overall system point of view. The main goal of the ASSESS project is to develop harmonized and standardized assessment procedures for collision mitigation and avoidance systems. Methods and Data Sources: In ASSESS, procedures are developed for: driver behaviour evaluation, pre-crash system performance evaluation, crash performance evaluation, socio-economic assessment. This paper will concentrate on the activities related to the crash evaluation. The objective is to perform simulations, sled tests and crash tests in order tounderstand the influence of the activation of the pre-crash systems on the occupants" injuries during the crash phase. When a traffic accident is unavoidable, pre-crash systems work on various safety devices in order to improve the vehicle occupants" protection. Braking assistance and adaptive restraint systems are the main pre-crash systems whose effect on the occupants" protection will be described in this paper. Results: The results will be a description of the effect of the activation of the pre-crash systems on the crash phase. Additionally, a set of recommendations for future methodology developments will be delivered. Furthermore, a first approach to the study of the effect of the pre-crash systems activation on the occupants" protection when the impact is unavoidable will be presented. This effect will be quantified using the biomechanical values obtained from the simulation and testing activities and their related injury risks. Simulation and testing activities will consider the following scenarios: - No activation of any pre-crash system, - Activation of one or a combination of several pre-crash systems. In this way, differences in the results obtained from different scenarios will show the effect of each pre-crash system separately during the crash phase. Discussion and Limitations: The set of activities developed in this research project is limited by the fact that with the given resources only a limited number of vehicle models could be investigated. In addition, there are also limitations related to the injury risk curves and the passive safety tools currently on the market. Conclusion and Relevance to session submitted: The paper will present a complete analysis of the effect of pre-crash systems during the crash phase when the impact is unavoidable. Details, limitations and first application experience based on a few examples will be discussed. Currently, there is not any regulation, assessment program, or other similar official procedure able to assess pre-crash systems during the crash phase. This project comprises phases of traffic accidents which have been historically analysed separately, and aims to evaluate them taking into account their interrelationship. ASSESS is one of the first European projects which deals in depth with the concept of integrated safety, defining methodologies to analyse vehicle safety from a global point of view.
A biofidelic flexible pedestrian legform impactor (FlexPLI) has been developed from the year 2000 onwards and evaluated by a technical evaluation group (Flex-TEG) of UN-ECE GRSP. A recently established UN-ECE GRSP Informal Group on GTR9 Phase 2 is aiming at introducing the FlexPLI within world-wide regulations on pedestrian safety (Phase 2 of GTR No. 9 as well as the new UN regulation 127 on pedestrian safety) as a test tool for the assessment of lower extremity injuries in lateral vehicle-to-pedestrian accidents. Besides, the FlexPLI has already been introduced within JNCAP and is on the Euro NCAP roadmap for 2014. Despite of the biofidelic properties in the knee and tibia sections, several open issues related to the FlexPLI, like the estimation of the cost benefit, the feasibility of vehicle compliance with the threshold values, the robustness of the impactor and of the test results, the comparability between prototype and production level and the finalization of certification corridors still needed to be solved. Furthermore, discussions with stakeholders about a harmonized lower legform to bumper test area are still going on. This paper describes several studies carried out by the Federal Highway Research Institute (BASt) regarding the benefit due to the introduction of the FlexPLI within legislation for type approval, the robustness of test results, the establishment of new assembly certification corridors and a proposal for a harmonized legform to bumper test area. Furthermore, a report on vehicle tests that previously had been carried out with three prototype legforms and were now being repeated using legforms with serial production status, is given. Finally, the paper gives a status report on the ongoing simulation and testing activities with respect to the development and evaluation of an improved test procedure with upper body mass for assessing pedestrian femur injuries.
For the assessment of vehicle safety in frontal collisions, the crash compatibility between the colliding vehicles is crucial. Compatibility compromises both the self protection and the partner protection properties of vehicles. For the accident data analysis, the CCIS (GB) and GIDAS (DE) in-depth data bases were used. Selection criteria were frontal car accidents with car in compliance with ECE R94. For this study belted adult occupants in the front seats sustaining MAIS 2+ injuries were studied. Following this analysis FIMCAR concluded that the following compatibility issues are relevant: - Poor structural interaction (especially low overlap and over/underriding) - Compartment strength - Frontal force mismatch with lower priority than poor structural interaction In addition injuries arising from the acceleration loading of the occupant are present in a significant portion of frontal crashes. Based on the findings of the accident analysis the aims that shall be addressed by the proposed assessment approach were defined and priorities were allocated to them. The aims and priorities shall help to decide on suitable test procedures and appropriate metrics. In general it is anticipated that a full overlap and off-set test procedure is the most appropriate set of tests to assess a vehicle- frontal impact self and partner protection.
A flexible pedestrian legform impactor (FlexPLI) has been evaluated by a Technical Evaluation Group (Flex-TEG) of the Working Party on Passive Safety (GRSP) of the United Nations Economic Commission for Europe (UN-ECE). It will be implemented within phase 2 of the global technical regulation (GTR 9) as well as within a new ECE regulation on pedestrian safety as a test tool for the assessment of lower extremity injuries in lateral vehicle-to-pedestrian accidents (UN-ECE 2010-1, 2010-2 and 2010-3). Due to its biofidelic properties in the knee and tibia section, the FlexPLI is found to having an improved knee and tibia injury assessment ability when being compared to the current legislative test tool, the lower legform impactor developed by the Pedestrian Safety Working Group of the European Enhanced Vehicle-safety Committee (EEVC WG 17). However, due to a lack of biofidelity in terms of kinematics and loadings in the femur part of the FlexPLI, an appropriate assessment of femur injuries is still outstanding. The study described in this paper is aimed to close this gap. Impactor tests with the FlexPLI at different impact heights on three vehicle frontends with Sedan, SUV and FFV shape are performed and compared to tests with a modified FlexPLI with upper body mass. Full scale validation tests using a modified crash test dummy with attached FlexPLI that are carried out for the first time prove the more humanlike responses of the femur section with applied upper body mass. Apart from that they also show that the impact conditions described in the current technical provisions for tests with the FlexPLI don"t necessarily compensate the missing torso mass in terms of knee and tibia loadings either. Therefore it can be concluded that an applied upper body mass will contribute to a more biofidelic overall behavior of the legform and subsequently an improved injury assessment ability of all lower extremity injuries addressed by the FlexPLI. Nevertheless, the validity of the original as well as the modified legform for tests against vehicles with extraordinary high bumpers as well as flat front vehicles still needs to be evaluated in detail. A first clue is given by the application of an additional accelerometer to the legform.
It is well known that most accidents with pedestrians are caused by the driver not being alert or misinterpreting the situation. For that reason advanced forward looking safety systems have a high potential to improve safety for this group of vulnerable road users. Active pedestrian protection systems combine reduction of impact speed by driver warning and/or autonomous braking with deployment of protective devices shortly before the imminent impact. According to the Euro NCAP roadmap the Autonomous Emergency Braking system tests for Pedestrians Protection will be set in force from 2016 onwards. Various projects and organisations in Europe are developing performance tests and assessment procedures as accompanying measures to the Euro NCAP initiative. To provide synthesised input to Euro NCAP so-called Harmonisation Platforms (HP-) have been established. Their main goal is to foster exchange of information on key subjects, thereby generating a clear overview of similarities and differences on the approaches chosen and, on that basis, recommend on future test procedures. In this paper activities of the Harmonisation Platform 2 on the development of Test Equipment are presented. For the testing targets that mimic humans different sensing technologies are required. A first set of specifications for pedestrian targets and the propulsion systems as collected by Harmonisation Platform 2 are presented together with a first evaluation for a number of available tools.
For a number of EU regulatory acts Virtual Testing (VT) is already allowed for type approval (see Commission Regulation No. 371/2010 of 16 April 2010 amending the Framework Directive 2007/46/EC). However, only a very general procedure on how to apply VT for type approval is provided. Technical details for specific regulatory acts are not given yet. The main objective of the European project IMVITER (IMplementation of VIrtual TEsting in Safety Regulations) was to promote the implementation of VT in safety regulations. When proposing VT procedures the new regulation was taken into account, in particular, addressing open issues. Special attention was paid to pedestrian protection as pilot cases. A key aspect for VT implementation is to demonstrate that the employed simulation models are reliable. This paper describes how the Verification and Validation (V&V) method defined by the American Society of Mechanical Engineers was adapted for pedestrian protection VT based assessment. or the certification of headform impactors an extensive study was performed at two laboratories to assess the variability in calibration tests and equivalent results from a set of simulation models. Based on these results a methodology is defined for certification of headform impactor simulation models. A similar study was also performed with one vehicle in the type approval test setup. Its bonnet was highly instrumented and subjected to 45 impacts in five different positions at two laboratories in order to obtain an estimation of the variability in the physical tests. An equivalent study was performed using stochastic simulation with a metamodel fed with observed variability in impact conditions of physical headforms. An estimation of the test method uncertainty was obtained and used in the definition of a validation corridor for simulation models. Validation metric and criteria were defined in cooperation with the ISO TC22 SC10 and SC12 WG4 "Virtual Testing". A complete validation procedure including different test setups, physical magnitudes and evaluation criteria is provided. A detailed procedural flowchart is developed for VT implementation in EC Regulation No 78/2009 based on a so called "Hybrid VT" approach, which combines real hardware based head impact tests and simulations. This detailed flowchart is shown and explained within this paper. Another important point within the virtual testing based procedures is the documentation of relevant information resulting from the verification and validation process of the numerical models used. For this purpose report templates were developed within the project. The proposed procedure fixes minimum V&V requirements for numerical models to be confidently used within the type-approval process. It is not intended to be a thorough guide on how to build such reliable models. Different modeling methodologies are therefore possible, according to particular OEM know-how. These requirements respond to a balance amongst the type-approval stakeholders interests. A cost-benefit analysis, which was also performed within the IMVITER project, supports this approach, showing the conditions in which VT implementation is beneficial. Based on the experience gained in the project and the background of the experts involved an outlook is given as a roadmap of VT implementation, identifying the most important milestones to be reached along the way to a future vehicle type approval procedure supported by VT. The results presented in this paper show an important step addressing open questions and fostering the future acceptance of virtual testing in pedestrian protection type approval procedures.
Aktive Systeme der passiven Fahrzeugsicherheit zum Fußgängerschutz, sogenannte crash-aktive Fußgängerschutzsysteme, werden seit 2005 zur Erfüllung der gesetzlichen Anforderungen (siehe Verordnung (EG) Nr. 78/2009 und 631/2009) in Serienfahrzeugen eingesetzt. Diese crash-aktiven Fußgängerschutzsysteme stellen im Gegensatz zu den rein passiven Systemen nur eine instationäre Lösung dar. Da die innerhalb der gesetzlichen Anforderungen definierten Testverfahren zur Bewertung stationärer Systeme entwickelt wurden, können derzeit mögliche Risiken instationärer Systeme nicht berücksichtigt werden. Im Rahmen dieses Forschungsprojektes soll ein Bewertungsverfahren für diese crash-aktiven Fußgängerschutzsysteme entwickelt werden, welches das reale Potential dieser Systeme möglichst gut wiedergibt. Basis hierfür soll eine umfangreiche Untersuchung zusätzlicher Risiken bilden. Die hier untersuchten instationären Schutzmaßnahmen werden nur im Falle eines Fahrzeuganpralls gegen Fußgänger aktiviert, der daher zuverlässig erkannt werden muss. Für die hierfür eingesetzten, kontaktbasierten Sensorsysteme stellen Fußgänger mit geringen Lasteinträgen in die Fahrzeugfront eine große Herausforderung dar. Die Lasteinträge hängen von zahlreichen Faktoren, wie bspw. der Höhe der entsprechenden Krafteinleitungspfade sowie der Größe und dem Gewichts des Fußgängers, ab. Mit Hilfe von umfangreichen Anprallversuchen und -simulationen wird gezeigt, dass die bisher eingesetzten Prüfkörper nur zum Teil für die Erfüllung dieser Anforderungen geeignet sind. Für ein geeignetes Prüfverfahren müssen daher neue Prüfkörper entwickelt werden. Durch die Aktivierung der Schutzmaßnahme soll bei den crash-aktiven Systemen vor allem das Verletzungsrisiko beim Kopfanprall verringert werden. Hierfür wird häufig die hintere Motorhaubenkante angehoben, um zusätzlichen Deformationsfreiraum zur Verfügung zu stellen. Die Haubenanhebung kann jedoch auch in zusätzlichen Verletzungsrisiken resultieren, bspw. durch die exponierte hintere Haubenkante oder die Verringerung des Deformationsfreiraums in Folge des Oberkörperanpralls. Ein Ersatzprüfverfahren zur Bewertung der Haubendeformation mit Hilfe des Hüftimpaktors wird vorgestellt. Ein hybrides Testverfahren bestehend aus Simulation und Versuch eignet sich für eine objektive Bewertung dieser Systeme, wobei die entsprechenden Versuchsparameter mit Hilfe der vorherigen Simulation bestimmt werden können.
Die Erfahrungen zeigen, dass auch im Brücken- und Ingenieurbau an Bundesfernstraßen die Vorteile von hochfestem und selbstverdichtendem Beton genutzt werden können. Unter den Randbedingungen des Brückenbaus sind insbesondere Vollplattenquerschnitte mit beidseitigen Kragarmen, die ohne Versprung im Querschnitt an die Platte angegliedert sind, für die Ausführung mit hochfestem Beton geeignet. Mit dieser Bauweise wurden Spannweiten bis zu 40 m realisiert. Der Schlankheit der Querschnitte ist jedoch durch die zusätzlichen Kosten für Beton- und Spannstahlbewehrung eine wirtschaftliche Grenze gesetzt. Für die Ausführung von Brückenüberbauten an Bundesfernstraßen in Ortbetonbauweise ist selbstverdichtender Beton aufgrund der üblichen Abmessungen und der konstruktiven Durchbildung von Brücken nicht geeignet. Direkt befahrene Fahrbahntafeln aus hochfestem Ortbeton ohne zusätzliche Abdichtung sind für Brücken an Bundesfernstraßen mit den heute üblichen Verfahren nicht realisierbar. Die Gebrauchseigenschaften von Bauteilen aus hochfestem und/oder selbstverdichtendem Beton, wie z. B. Verformung und Dauerhaftigkeit, haben sich mindestens als vergleichbar mit normalfestem Beton dargestellt. Die Dauerhaftigkeit von hochfestem Beton stellt sich unter der Frost-Tausalz- und Wettereinwirkung an Bundesfernstraßen sogar besser dar, als für normalfesten Rüttelbeton oder selbstverdichtenden Beton. Chlorideindringwiderstand und Karbonatisierungswiderstand des hochfesten Betons sind höher. Selbst dann, wenn infolge von Oberflächenrissen das optische Erscheinungsbild eines Brückenpfeilers beeinträchtigt ist, sind Chlorideindring- und Karbonatisierungstiefe geringer als für normalfesten Beton unter den gleichen Einwirkungen. Die Erfahrungen haben gezeigt, dass bis einschließlich der Festigkeitsklasse C70/85 hochfeste Betone zielsicher hergestellt und eingebaut werden können. Mit abnehmender Festigkeitsklasse werden jedoch die typischen Schwierigkeiten bei der Ausführung der Bauteile geringer. Voraussetzung für die zielsichere Herstellung von hochfestem Beton und/oder selbstverdichtendem Beton ist jedoch die Umsetzung der zwischen Betonhersteller und bauausführendem Unternehmen vorab projektbezogenen, abgestimmten und qualitätssichernden Maßnahmen, die in QS-Plänen, z. B. für Betonherstellung, Transport und Baustelle, niedergelegt werden. Die notwendigen Maßnahmen zur Sicherstellung der geforderten Frischbetoneigenschaften, Hydratationswärmeentwicklung, Festigkeitsentwicklung, Einbauverfahren, Nachbehandlung und Festbetoneigenschaften gehen über das für normalfesten Rüttelbeton Bekannte hinaus. Der Aufwand für selbstverdichtenden Beton geht dabei noch über die für hochfesten Beton hinaus. Aus diesen Gründen wird die Begleitung solcher Baumaßnahmen durch nicht in das Baugeschehen involvierte, kompetente und erfahrene Betoningenieure weiterhin für erforderlich gehalten. Dies wird heute schon mit der Forderung einer Zustimmung im Einzelfall für Bauwerke und Bauteile aus hochfestem oder selbstverdichtendem Beton in den ZTV-ING in die Praxis umgesetzt. Mit zunehmender Verwendung hochfester und/oder selbstverdichtender Betone, auch außerhalb des Brückenbaus, werden die Erfahrung und die Sicherheit im Umgang mit diesen Betonen zunehmen, sodass das Instrument der Zustimmung im Einzelfall dann verzichtbar werden kann.