Filtern
Erscheinungsjahr
Dokumenttyp
- Konferenzveröffentlichung (637) (entfernen)
Schlagworte
- Conference (386)
- Konferenz (382)
- Germany (212)
- Deutschland (209)
- Unfall (188)
- Accident (187)
- Safety (123)
- Sicherheit (122)
- Injury (117)
- Verletzung (117)
Institut
Verschiedene Untersuchungen belegen, dass sich im Durchschnitt die verkehrsrelevanten Fähigkeiten von Schmerzpatienten unter dem Einfluss einer Langzeitopioidtherapie verschlechtern, dass es jedoch auch Patienten gibt, die im Normbereich liegende Ergebnisse erzielen. Hieraus wird der Schluss gezogen, dass eine individuelle Beurteilung der Fahrtauglichkeit erfolgen sollte. Während der Einstellungsphase besteht nach Expertenansicht absolute Fahruntüchtigkeit, ebenso bei größerer Dosisänderung und wechselnden Therapieverläufen. Nach einschlägigen Erfahrungen zeigen opioidpflichtige Patienten ein ähnlich risikovermeidendes Verhalten wie ältere Verkehrsteilnehmer. Eine Pilotstudie, der Interviews an vier Kliniken zugrundelagen, erbrachte unter anderem folgende Ergebnisse: Alle befragten Therapeuten richten die Schmerztherapie nach dem WHO Stufenschema aus, ab Stufe 2 werden Opioide in die Behandlung einbezogen. Kombinationen mit anderen Medikamenten sind häufig. Es überrascht die geringe Anzahl von autofahrenden opioidpflichtigen Patienten. Unfälle von diesen Patienten waren den befragten Schmerztherapeuten nicht bekannt. Befürwortet wird die bei der nächsten Änderung des Paragraphen 24 a Straßenverkehrsgesetz, die das Führen von Kraftfahrzeugen unter Drogeneinfluss als Ordnungswidrigkeitentatbestand vorsieht, geplante Ausnahmeregelung für therapeutisch genutzte Arzneimittel.
Es wird über ein Schulungsprogramm referiert, das von einer Expertengruppe entwickelt wurde und der Entdeckung von unter Drogen stehenden Kraftfahrern durch Polizeibeamte dient. Die Expertengruppe setzte sich aus Verkehrs- und Rechtsmedizinern, Toxikologen, Ärzten, Juristen und Polizeischulungsbeamten zusammen. Die Verbreitung des Schulungsprogramms wird über Multiplikatorenseminare und Praxisseminare erfolgen. Inhalte des Schulungsprogramms sind Epidemiologie, Rechtsfragen, Drogenwirkungen, Stoffkunde, Verdachtsgewinnung und Beweissicherung. Die Expertengruppe konzipierte einen Protokollbogen für polizeiliche Beobachtungen, die viele Punkte aus den bereits vorhandenen Protokollen zur Feststellung von Trunkenheitsfahrten enthalten. Zusätzlich sind Beobachtungen der Augenbindehäute, des Durchmessers und der Reaktion der Pupillen aufgeführt. Außerdem wird nach Änderungen des Verhaltens während der polizeilichen Maßnahme gefragt. In den Multiplikatorenseminaren geht es um die Ausbildung der Dozenten, die das gewonnene Wissen in Praxisseminaren an Kollegen weitergeben. Es wurden bereits Pilotveranstaltungen durchgeführt.
A methodology to derive precision requirements for automatic emergency braking (AEB) test procedures
(2015)
AEB Systems are becoming important to increase traffic safety. Test procedures in testing for consumer information, manufacturer self-certification and technical regulations are used to ensure a certain minimum performance of these systems. Consequently, test robustness, test efficiency and finally test cost become increasingly important. The key driver for testing effort and test costs is the required repeatable accuracy in a test design - the higher the accuracy, the higher effort and test costs. On the other hand, the performance of active safety systems depends on time discretization in the environment perception and other sub-systems: for instance, typical sensors supply information with a cycle time of 50 - 150 ms. Time discretization results in an inherent spread of system performance, even if the test conditions are perfectly equal. The proposed paper shows a methodology to derive requirements for a test setup (e.g. test repeats, use of driving robots, ...) as function of AEB system generation and rating method (e.g. Euro NCAP points awarded, pass/fail, ...). While the methodology itself is applicable to AEB pedestrian and AEB Car-Car scenarios, due to the lack of sufficient test data for AEB Car-Car, the focus of this paper is on AEB pedestrian scenarios. A simulation model for the performance of AEB Pedestrian systems allows for the systematic variation of the discretization time as well as test condition accuracy. This model is calibrated with test results of 4 production vehicles for AEB Pedestrian, all fully tested by BASt according to current Euro NCAP test protocols. Selected parameters to observe the accuracy of the test setup in case of pedestrian AEB is the calculated impact position of pedestrian on the vehicle front (as if no braking would have occurred), and the test vehicle speed accuracy. These variable was shown in real tests to be repeatable in the range of ± 5 cm and ± 0,25 km/h, respectively, with a fully robotized state of the art test setup. The sensitivity of AEB performance (measured in achieved speed reduction as well as overall rating result according to current Euro NCAP rating methods) towards discretization and the sensitivity of performance towards test accuracy then is compared to identify economic yet robust test concepts. These comparisons show that the available repeatability accuracy of current test setups is more than sufficient for today's AEB system capabilities. Time discretization problems dominate the performance spread especially in test scenarios with a limited pedestrian dummy reveal time (e.g. child behind obstruction, running adult scenarios with low car speeds). This would allow to increase test tolerances to decrease test cost. A methodology which allows to derive the required tolerances in active safety tests might be valuable especially for NCAPs of emerging countries that do not have the necessary equipment (e.g. driving robots, positioning units) available for the full-scale and high tolerance EuroNCAP active safety procedures yet still want to rate active safety systems, thus improving the global safety.
Accidents between right turning trucks and straight riding cyclists often show massive consequences. Accident severity is much higher than in other accidents. The situation is critical especially due to the fact that, in spite of the six mirrors that are mandatory for ensuring a minimum field of sight for the truck drivers, cyclists in some situations cannot be seen or are not seen by the driver. Either the cyclist is overlooked or is in a blind spot area that results from the turning manoeuvre of the truck and its articulation if it is a truck trailer or truck semitrailer combination. At present driver assistance systems are discussed that can support the driver in the turning situation by giving a warning when cyclists are riding parallel to the truck just before or in the turning manoeuvre. Such systems would generally bear a high potential to avoid accidents of right turning trucks and cyclists no matter if they ride on the road or on a parallel bicycle path. However, performance requirements for such turning assist systems or even test procedures do not exist yet. This paper describes the development of a testing method and requirements for turning assist systems for trucks. The starting point of each development of test procedures is an analysis of accident data. A general study of accident figures determines the size of the problem. In-depth accident data is evaluated case by case in order to find out which are representative critical situations. These findings serve to determine characteristic parameters (e.g. boundary conditions, trajectories of truck and cyclist, speeds during the critical situation, impact points). Based on these parameters and technical feasibility by current sensor and actuator technology, representative test scenarios and pass/fail-criteria are defined. The outcome of the study is an overview of the accident situation between right turning trucks and straight driving cyclists in Germany as well as a corresponding test procedure for driver assistance systems that at this first stage will be informing or warning the driver. This test procedure is meant to be the basis for an international discussion on introducing turning assist systems in vehicle regulations.
In the paper it is investigated to what extend one can extrapolate the detailed accident database GIDAS (German In-Depth Accident Study), with survey area Hanover and Dresden region, to accident behavior in other regions and countries within Europe and how such an extrapolation can be implemented and evaluated. Moreover, it is explored what extent of accident data for the target country is necessary for such an extrapolation and what can be done in situations with sparse and low accident information in a target region. It will be shown that a direct transfer of GIDAS injury outcomes to other regions does not lead to satisfactory results. But based on GIDAS and using statistical decision tree methods, an extrapolation methodology will be presented which allows for an adequate prediction of the distribution of injury severity in severe traffic accidents for European countries. The method consists essentially of a separation of accidents into well-described subgroups of accidents within which the accident severity distribution does not vary much over different regions. In contrast the distribution over the various subgroups of accidents typically is rather different between GIDAS and the target. For the separation into the subgroups meaningful accident parameters (like accident type, traffic environment, type of road etc.) have been selected. The developed methodology is applied to GIDAS data for the years 1999-2012 and is evaluated with police accident data for Sweden (2002 to 2012) and the United Kingdom (2004 to 2010). It is obtained that the extrapolation proposal has good to very good predictive power in the category of severe traffic accidents. Moreover, it is shown that iterative proportional fitting enables the developed extrapolation method to lead to a satisfactory extrapolation of accident outcomes even to target regions with sparse accident information. As an important potential application of the developed methodology the a priori extrapolation of effects of (future) safety systems, the operation of which can only be well assessed on the basis of very detailed GIDAS accident data, is presented. Based on the evaluation of the presented extrapolation method it will be shown that GIDAS very well represents severe accidents, i.e. accidents with at least one severely or fatally injured person involved, for other countries in Europe. The developed extrapolation method reaches its limits in cases for which only very little accident information is available for the target region.
Euro NCAP will start to test pedestrian Automatic Emergency Braking Systems (AEB) from 2016 on. Test procedures for these tests had been developed by and discussed between the AsPeCSS project and other initiatives (e.g. the AEB group with Thatcham Research from the UK). This paper gives an overview on the development process from the AsPeCSS side, summarizes the current test and assessment procedures as of March 2015 and shows test and assessment results of five cars that had been tested by BASt for AsPeCSS and the respective manufacturer. The test and assessment methodology seems appropriate to rate the performance of different vehicles. The best test result - still one year ahead of the test implementation - is around 80%, while the worst rating result is around 10%. Other vehicles are between these boundaries.
The EVERSAFE project addressed many safety issues for electric vehicles including the crash and post-crash safety. The project reviewed the market shares of full electric and hybrid vehicles, latest road traffic accident data involving severely damaged electric vehicles in Europe, and identified critical scenarios that may be particular for electric vehicles. Also, recent results from international research on the safety of electric vehicles were included in this paper such as results from performed experimental abuse cell and vehicle crash tests (incl. non-standardized tests with the Mitsubishi i-MiEV and the BMW i3), from discussions in the UN IG REESS and the GTR EVS as well as guidelines (handling procedures) for fire brigades from Germany, Sweden and the United States of America. Potential hazards that might arise from damaged electric vehicles after severe traffic accidents are an emerging issue for modern vehicles and were summarized from the perspective of different national approaches and discussed from the practical view of fire fighters. Recent rescue guidelines were reviewed and used as the basis for a newly developed rescue procedure. The paper gives recommendations in particular towards fire fighters, but also to vehicle manufacturers and first-aiders.
Since the beginning of the testing activities related to passive pedestrian safety, the width of the test area being assessed regarding its protection level for the lower extremities of vulnerable road users has been determined by geometrical measurements at the outer contour of the vehicle. During the past years, the trend of a decreased width of the lower extremity test and assessment area realized by special features of the outer vehicle frontend design could be observed. This study discusses different possibilities for counteracting this development and thus finding a robust definition for this area including all structures with high injury risk for the lower extremities of vulnerable road users in the event of a collision with a motor vehicle. While Euro NCAP is addressing the described problem by defining a test area under consideration of the stiff structures underneath the bumper fascia, a detailed study was carried out on behalf of the European Commission, aiming at a robust, worldwide harmonized definition of the bumper test area for legislation, taking into account the specific requirements of different certification procedures of the contracting parties of the UN/ECE agreements from 1958 and 1998. This paper details the work undertaken by BASt, also serving as a contribution to the TF-BTA of the UN/ECE GRSP, towards a harmonized test area in order to better protect the lower extremities of vulnerable road users. The German In-Depth Accident Database GIDAS is studied with respect to the potential benefit of a revised test area. Several practical options are discussed and applied to actual vehicles, investigating the differences and possible effects. Tests are carried out and the results studied in detail. Finally, a proposal for a feasible definition is given and a suggestion is made for solving possible open issues at angled surfaces due to rotation of the impactor. The study shows that, in principle, there is a need for the entire vehicle width being assessed with regard to the protection potential for lower extremities of vulnerable road users. It gives evidence on the necessity for a robust definition of the lower extremity test area including stiff and thus injurious structures at the vehicle frontend, especially underneath the bumper fascia. The legal definition of the lower extremity test area will shortly be almost harmonized with the robust Euro NCAP requirements, as already endorsed by GRSP, taking into account injurious structures and thus contributing to the enhanced protection of vulnerable road users. After finalization of the development of a torso mass for the flexible pedestrian legform impactor (FlexPLI) it is recommended to consider again the additional benefit of assessing the entire vehicle width.
During the past five years, a Euro NCAP technical working group on pedestrian safety has been working on improving test and assessment procedures for enhanced passive pedestrian safety. After harmonizing the tools and procedures as much as possible with legislation, the work was mainly focused on the development of grid procedures for the pedestrian body regions head, upper leg with pelvis and lower leg with knee. Furthermore, the test parameters for the head and the upper leg were revised, a new lower legform impactor was introduced and the injury thresholds were adjusted or, where necessary, the injury criteria were changed. Finally, the assessment limits and colour scheme were refined, widening the range and adding two more colours in order to provide a more detailed description of the pedestrian safety performance. By abstaining from an assessment based on a worst point selection philosophy, the improved test point determination procedures that were introduced during the years 2013 and 2014 give a more homogeneous, high resolution picture of the pedestrian safety performance of the vehicle frontends. By using a uniform grid for each test zone approximately 200 test points, evenly distributed within each area, can now be assessed per vehicle. The introduction of the flexible pedestrian legform impactor in 2014 enables a more realistic injury prediction of the knee and the tibia using a biofidelic test tool. With the new upper legform test that has been launched in 2015 the assessment in that area is now focusing on the injured body region instead of the injury causing vehicle part and thus is aligned with the approach in the remaining body regions head and lower leg. At the same time, a monitoring test with the headform impactor against the bonnet leading edge is closing the possible gap between the test areas to identify injury causing vehicle parts that moved out of focus due to the introduction of the new upper legform test. The paper describes the new test and assessment procedures with their underlying philosophy and gives an outlook in terms of open issues, specifying the needs for further improvement in the future. In parallel to the work of the pedestrian subgroup, a Euro NCAP working group on heavy vehicles introduced a set of protocol changes in 2011 that were related to the assessment of M1 vehicles derived from commercial vehicles, with a gross vehicle weight between 2.5 and 3.5 tons and 8 or 9 seats. The paper also investigates the applicability of the new pedestrian test and assessment procedures to heavy vehicles.
Upcoming test procedures and regulations consider the use of Q-dummies. Especially Q6 and Q10 will be introduced to assess the safety of child occupants in vehicle rear seats. Therefore detailed knowledge of these dummies is important to improve safety. As recent studies have shown, chest deflection measurements of both dummies are influenced by parameters like belt geometry. This could lead to a non optimized design of child restraint systems (CRS) and belt systems. The objective of this study is to obtain a more detailed understanding of the sensitivity of chest measurements to restraint parameters and to investigate the possibilities of chest acceleration as an alternative for the assessment of chest injury risks. A study of frontal impact sled tests was performed with Q6 and Q10 in a generic rear seat environment on a bench. Belt parameters like modified belt attachment locations were varied. For the Q6 dummy, different positioning settings of the CRS (booster with backrest) and of the dummy itself were investigated. The Q10 dummy was seated on a booster cushion. Here the position of the upper belt anchorage point was varied. To simulate the influence of vehicle rotation in the ODB crash configuration, the bench was pre-rotated on the sled in additional tests with the Q10. This configuration was tested with and without pretensioner and load limiter. Chest deflection in Q6 showed a high sensitivity to changes in positioning of the CRS and the dummy itself. A more slouched position of the CRS or dummy resulted in a reduction of measured chest deflection, whereas chest acceleration increased for a more slouched position of the CRS. Chest deflection in Q10 is sensitive to belt geometry as already shown in other studies. In a more outboard position of the shoulder belt anchorage the measured chest deflection is higher. Chest acceleration shows the opposite tendency, which is highest for the rearmost location of the upper belt anchorage. On a pre-rotated bench the highest chest deflection within this test series was observed without load limiter/pretensioner and an outboard belt position. By optimizing the belt location and the use of pretensioner/load limier the chest deflection was significantly reduced. For the Q6 a criterion based on chest acceleration as well as deflection measured at two locations might be the most reliable approach, which requires further research with an additional upper deflection sensor. In the Q10 the measured chest deflection does not always correctly reflect the severity of chest loading. The deflection is depending on initial belt position and restraint parameters as well as test conditions, which result in different directions of belt migration. A3ms chest acceleration might be a better indicator for severity of chest loading independent of different conditions like belt geometries. However, in some cases the benefit of an optimized restraint system could only be shown by deflection. These findings suggest that further research is needed to identify a chest injury assessment method, which could be based on deflection as well as acceleration or other parameters related to belt to occupant interaction.
Frontal impact is still the most relevant impact direction in terms of injury causation amongst car occupants. Especially for car-to-car frontal impacts the mass ratio between the involved vehicles has a significant impact on the injury risk (the heavier the opponent car the higher the injury risk). In order to address this issue frontal Mobile Deformable Barrier test procedures have been developed world-wide (for example the MPDB procedure that was fully described during the FIMCAR Project). The objective of this study was to investigate how vehicles of different weight classes perform in a mobile barrier test procedure compared to a fixed barrier test procedure (the full width rigid and offset deformable barrier test). Beyond that, the influence of vehicle mass and vehicle deformation on injuries was evaluated based on real world accident data. Five vehicle types were selected and tested in a fixed offset test procedure (ODB), a full width rigid barrier test procedure (FWRB) and a mobile offset test procedure (MPDB). For the accident analyses data from the German In-Depth Accident Study (GIDAS) was evaluated with a focus on MAIS 2+ injured belted front row car (UN-R 94 compliant cars) occupants in frontal impact accidents. Test data indicates higher dummy loadings, in particular for the head acceleration and chest acceleration, in the MPDB test for the vehicles with a mass lighter than the trolley (1,500 kg) compared to the FWRB test. The trend of increased vehicle stiffness (especially illustrated by tests with the MPDB and small cars) shows the need of a further improvement of passive restraint systems to reduce the occupant loading and with it the injury risk. The analyzed GIDAS data confirm the higher injury risk for occupants in cars with an accident weight of less than 1,500 kg compared to those with a crash weight above 1,500 kg in car-to-car and car-to-object or car-to-HGV, respectively. Furthermore the injury risk increases with decreasing mass ratio (i.e., the opponent car is heavier) in car-to-car accidents. Independent from the higher injury risk, the risk for passenger compartment intrusion in frontal impact appears not to be independent on the crash weight of the car.
During a lifecycle a tyre undergoes degradations due to mechanical wear and chemical ageing which affect not only durability and safety but also tyre/road noise emission and rolling resistance. This paper presents a study with the purpose to study how much tyre/road noise and rolling resistance change when car tyres are worn down from the original 8 mm tread depth to 2 mm, and when chemical ageing of the tyre rubber is simulated by exposure to heat. Six car tyres of different types were selected for the study which were worn on a wear machine in steps of 2 mm tread depth. Before, between and after these wear sessions tyre/road noise and rolling resistance were measured on two drum facilities with different surface textures, including replicas of ISO surfaces. Additionally, coast-by and CPX measurements were made on outdoor ISO test tracks. The results show that the wear and age effect was low on ISO surfaces but dramatic (noise increased with wear) on the rough-textured surface and high but opposite on an extremely smooth surface.
Mit der Änderung des deutschen Straßenverkehrsrechtes werden Voraussetzungen für die amtliche Anerkennung von Anbietern von Kursen zur Wiederherstellung der Fahreignung gesetzlich konkretisiert. Das Instrument einer bundeseinheitlichen Qualitätssicherung wird per Gesetz verbindlich eingeführt. Mit der Überprüfung wird die Bundesanstalt für Straßenwesen als neutrale Stelle beauftragt. Es wird davon ausgegangen, dass es sich bei den Kursen zur Wiederherstellung der Eignung von Kraftfahrzeugführern um Maßnahmen der Personalzertifizierung handelt. Das Referat beschreibt den Ablauf des Akkreditierungsverfahrens und die Anforderungen an Maßnahmenträger, die einen Antrag auf Akkreditierung gestellt haben. Bei den Anforderungen an die Kursleiter spielen die berufliche Qualifikation sowie solche Anforderungen eine Rolle, die sich aus dem jeweiligen Qualitätssicherungssystem ergeben. In der Akkreditierung der Anbieter von Kursen zur Wiederherstellung der Fahreignung durch die Bundesanstalt für Straßenwesen wird nicht nur eine Bestätigung der Qualität und Fachkompetenz gesehen, sondern zugleich auch eine Gewähr für die Durchführung der jeweiligen Kurse nach bundeseinheitlichen Kriterien.
Es wird auf Grund einer Befragung untersucht, ob ein signifikanter Unterschied zwischen Fahranfängern, die die Prüfung nach weniger als 21 Fahrstunden, und solchen, die sie nach 21 und mehr Stunden bestanden haben, in Bezug auf Unfallneigung und Unfallhäufigkeit besteht. Es ergab sich, dass die kurz ausgebildeten im ersten Jahr eine Fahrleistung von durchschnittlich 12.362 Kilometer, die langausgebildeten von 7.750 Kilometer aufzuweisen hatten. Pro 1 Million Kilometer hatten die kurzausgebildeten 45,6, die langausgebildeten 73,2 Unfälle. Dem entsprach das Verhältnis von anderen Auffälligkeiten. Bei den Kurzausgebildeten ergaben sich keine Hinweise auf Defizite. Der Nutzen einer personenunabhängigen Mindestzahl von Fahrstunden ist zweifelhaft. Fahrschüler, die eine verhältnismäßig große Zahl von Fahrstunden benötigen, stellen die eigentliche Problemgruppe dar. Fahrschüler, die in der Fahrschule schnell lernen und bei der Prüfung erfolgreich sind, haben vergleichsweise gute Fahranfängerchancen.
Ausgehend von der negativen Entwicklung der Statistik von Unfällen, bei denen Kinder als Radfahrer verletzt werden, diskutiert der Autor Maßnahmen, die die Sicherheit dieser Verkehrsteilnehmergruppe erhöhen können. Der Autor geht in seinen Betrachtungen auf folgende Felder ein: Erziehung und Aufklärung im schulischen und außerschulischen Sektor, Verkehrsüberwachung für den fließenden und ruhenden Verkehr unter besonderer Berücksichtigung zugeparkter Gehwege, Radwege und anderer Verkehrsflächen, Gesetzgebung und Rechtsprechung, Konstruktion von Kinderfahrrädern, politische und Verwaltungsentscheidungen auf allen Ebenen, Kauf und Verkauf von Kinderfahrrädern, Darstellung der Gefährdung von radfahrenden Kindern in den Medien sowie Anstrengungen von Wissenschaft und Forschung.
Es wird das Unfallrisiko auf dem Hintergrund der zeitlichen Entwicklung der Verkehrsbeteiligung beschrieben. Entsprechende Datenvergleiche bilden eine unverzichtbare Basis für die Beurteilung des Unfallgeschehens und die daraus abzuleitenden zielgruppen- und problemorientierten Planungen weiterer Forschungsprojekte und Sicherheitsmaßnahmen. Änderungen in der Nutzung bestimmter Verkehrsmittel mit Änderungen des Unfallrisikos können auf bestimmte Problemgruppen verweisen. Bezüglich zeitlicher Veränderungen werden die Gruppen der 21- bis 24-jährigen Pkw-Fahrer sowie die 65- bis 75-jährigen Pkw-Fahrer einer näheren Analyse unterzogen.
Internationale Vergleiche der Verkehrssicherheit sind eine notwendige Ergänzung der üblichen Betrachtung der nationalen Unfallentwicklung. Die dazu benötigten detaillierten und zuverlässigen statistischen Angaben sind den einschlägigen internationalen Veröffentlichungen zum großen Teil nicht zu entnehmen. Die Bundesanstalt für Straßenwesen hat daher in Absprache mit dem Bundesminister für Verkehr eine Datenbank internationaler Verkehrs- und Unfalldaten aufgebaut. Die darin gesammelten Daten werden regelmäßig für internationale Vergleiche verwendet. Einige Ergebnisse werden in dieser Arbeit vorgestellt. Seit 1970 haben sich in den hochmotorisierten Ländern die Unfallzahlen im Prinzip günstig entwickelt. Der stärkste Rückgang bei den Getötetenraten ist für die Bundesrepublik Deutschland mit einer Abnahme um fast drei Viertel zu verzeichnen. Günstigere Sicherheitsniveaus haben jedoch durchgängig Großbritannien, die Niederlande, die Schweiz und zum Teil die USA. Bei der Betrachtung einzelner Segmente des Unfallgeschehens fällt auf, dass Deutschland sich sowohl bei den Kinderunfällen als auch bei der Sicherheit auf Autobahnen stark verbessert hat. Auf den Landstraßen ist das Sicherheitsniveau jedoch weniger erfreulich, hier sind auch die günstigen Werte der USA noch nicht erreicht. Internationale Vergleiche sind somit auch nützlich, um Problembereiche des Unfallgeschehens zu identifizieren.
Die meisten der in Betracht kommenden Zwischenquerschnitte werden durch die derzeitigen Entwurfsrichtlinien nicht abgedeckt. Hinreichende Erkenntnisse über ihre Leistungsfähigkeit, die bei verschiedenen Belastungen erzielbaren Verkehrsqualitäten und vergleichende Angaben zum Sicherheitsniveau der Zwischenquerschnitte liegen nicht vor. Die Projektgruppe "Zwischenquerschnitte" der Bundesanstalt für Straßenwesen untersucht daher die Vor- und Nachteile der Zwischenquerschnitte mit dem Ziel, Einsatzbereiche für die verschiedenen Ausbildungsformen von Querschnitten zu entwickeln. Der Bericht gibt einen Überblick über bisherige Aktivitäten der Projektgruppe und stellt erste Zwischenergebnisse der Untersuchung vor. Bisherige Messungen zeigen, dass der besondere Vorteil der zwei- und dreiseitigen Zwischenquerschnitte in der Verbesserung der Überholsituation liegt. Für die Beurteilung vierstreifiger Zwischenquerschnitte kann bislang erst die Aussage gemacht werden, dass immer dann, wenn die Verkehrsbelastung tatsächlich einen Querschnitt mit 4 Fahrstreifen erforderlich macht, man die beiden Fahrrichtungen aus Gründen der Verkehrssicherheit baulich trennen sollte.
Nach grundsätzlichen Einführungsüberlegungen wird zunächst die Frage der Akzeptanz und die Notwendigkeit, bei der Entwicklung und Erprobung von Maßnahmen, Vertreter der Erziehungsinstanzen möglichst frühzeitig und umfassend zu beteiligen, angesprochen. Diese Forderung einer engen Abstimmung und Zusammenarbeit von Forschungspraxis, Umsetzungspraxis und Erziehungspraxis gilt auch für die Entwicklung, die Erprobung, die Umsetzung, die anschließenden Wirksamkeitskontrollen, die Interpretation der Ergebnisse und die Auswahl der die weitere Umsetzung korrigierenden Informationen. Im folgenden werden zwei weitere wichtige Wirksamkeitsbedingungen ausführlicher behandelt: die Entwicklungsorientierung und der Situationsbezug, d.h. die Orientierung der Maßnahme an der Umgebung des Kindes, die als konkrete Verkehrswirklichkeit den Raum bildet, in dem das Kind lebt und aufwächst. Als konkrete Beispiele für das ineinandergreifen deduktiv theoretischer Ableitungen und praktischer Erfahrungen bei der Entwicklung von verkehrspädagogischen Maßnahmen werden das Programm "Kind und Verkehr", der Kinder-Verkehrs-Club, das Entwicklungsprojekt "Verkehrserziehung im Kindergarten" erwähnt. Als mehr formale Bedingungen, die für die Wirksamkeit einer Maßnahme wichtig sind, werden deren Kontinuität, aber auch grundsätzliche Veränderbarkeit herausgearbeitet.
Um die Wirkung hochgesetzter Bremsleuchten auf das Uunfallgeschehen abzuschätzen, wurde eine Reihe von Untersuchungen eingeleitet. Die Zusammenfassung ihrer Ergebnisse: 1. Der Anteil der Pkw mit hochgesetzten Bremsleuchten ist gering und scheint weiter zu sinken. 2. Die Wirkung hochgesetzter Bremsleuchten kann noch nicht abschließend beurteilt werden. Es gibt aber Hinweise dafür, dass die auf Grund von Experimenten erwarteten positiven Effekte aus einer Reihe von Gründen relativiert werden müssen: - Wahrnehmungs- (Tiefen- und Entfernungseindruck) und Bremsgewohnheiten des Alltags entsprechen nicht den experimentellen Bedingungen; - Kompensationsverhalten auf Grund vermeintlich besserer Bremssignalisierung ist nicht auszuschließen; - hochgesetzte Bremsleuchten werden von den Betroffenen kontrovers beurteilt, teilweise nicht ohne starke Emotionen; - für das normale alltägliche Bremsverhalten sind Informationen über die Stärke der Verzögerung des Vordermanns wünschenswerter als der bloße Hinweis "Fahrer bremst". 3. Verletzungen von Pkw-Insassen durch hochgesetzte Bremsleuchten sind nicht zu erwarten. 4. Um ein positives Gesamtergebnis bei der Gegenüberstellung von Nutzen und Kosten zu erreichen, müssten hochgesetzte Bremsleuchten etwa 10 % der Folgen des theoretisch zu beeinflussenden Unfallpotentials vermeiden. 5. 36 % der befragten Autofahrer fordern ein Verbot hochgesetzter Bremsleuchten, 20 % eine Einbauvorschrift.