Filtern
Erscheinungsjahr
- 2015 (124) (entfernen)
Dokumenttyp
- Buch (Monographie) (62)
- Konferenzveröffentlichung (56)
- Wissenschaftlicher Artikel (2)
- Bericht (2)
- Arbeitspapier (2)
Schlagworte
- Germany (104)
- Deutschland (101)
- Research report (56)
- Forschungsbericht (55)
- Conference (41)
- Konferenz (41)
- Test (31)
- Versuch (29)
- Unfall (24)
- Accident (22)
The paper gives an overview of the recent (mostly 2012) figures of killed bus/coach occupants (drivers and passengers) in 27 Member States of the European Union as reported by CARE. The Evolution of the figures of bus/coach occupants killed in road accidents urban, rural without motorway and on motorways from 1991 to 2010 in 15 Member States of the EU supplements this information. More detailed are the figures reported for Germany by the Federal Statistics. The paper displays long-term evaluations (1957 to 2012) for killed, seriously and slightly injured occupants in all kinds of buses/coaches. Midterm evaluations (1995 to 2012) of the figures of fatalities and casualties are displayed for different busses according to their identification of road using as coaches, urban buses, school buses, trolley buses and "other buses". To be able to compare the evolutions of the safety of vehicle occupants it is customary to use different risk indicators. Calculations and illustrations for three often used indicators with their development over time are given: fatalities, seriously injured and slightly injured per 100,000 vehicles registered, per 1 billion (109) vehicle-kilometres travelled and per 1 billion (109) person-kilometres. These indicators are shown for occupants of cars, goods vehicles and buses/coaches. For the period from 1957 until 2012 it is obvious, that for all three vehicle categories analysed there was a clear long-term trend towards more occupant safety in terms of casualties per vehicles registered and per vehicle mileage. This was most significant for car occupants but it can be seen for bus/coach occupants and goodsvehicle occupants as well. Figures of killed occupants and of casualties related to person-kilometres are calculated and displayed for the shorter period 1995 to 2012. Here it becomes obvious that the bus/coach is still the safest mode of transport for the occupants of road vehicles. Graphs for the casualty risk indices still show significantly higher risks for car occupants despite the corresponding curve moved sustainable downwards. It is remarkable, that the risks of being killed or injured for the occupants of urban buses is growing whereas the corresponding risk for the occupants of coaches in line traffic tends downwards. The article ends with a short comparison and discussion of the risk indicators which are actually published for the occupants (driver and passengers) of cars and the passengers of buses/coaches, railroads, trams and airplanes. The interpretation of such information depends on the perception and it seems that for a complete view not only one indicator should be used and the evolutions of the indicator values during longer periods (as displayed with examples in the paper) should also be taken into account.
This paper presents findings of a laboratory experiment which aimed at evaluating the sensitivity and intrusiveness of Tactile Detection Response Task (TDRT) methodology. Various single-task, dual-task and triple-task scenarios were compared. The task scenarios included a surrogate of driving (tracking task) and different secondary tasks (N-back, surrogate reference task (SuRT)). The results suggest that the TDRT is sensitive to load levels of secondary tasks which primarily demand for cognitive resources (N-back). Sensitivity to variations of visual"manual load could not be shown (SuRT). TDRT seems also to be able to differentiate between modes of primary task which varies in terms of cognitive load (visual against auditory tracking task). Results indicated intrusiveness of TDRT on primary task performance and secondary task performance depending on the type of underlying task scenario. As a conclusion, TDRT can be recommended as a method to assess attentional effects of cognitive load of a secondary task, but should be used with caution for secondary tasks with strong motor demands.
Many safety-relevant tasks in control or diagnostics require binary choices such as "conflict versus separation" in air traffic control, "normal versus pathological" when interpreting x-ray pictures, or "permitted versus forbidden" when inspecting airport security scans. Deciders often are uncertain, but nevertheless required to decide between two alternatives, that is, they have not only to decide upon an action, but also about the admissible level of uncertainty. If the accepted level of judgment certainty is not taken into account, the sequence of decisions does not capture the full picture of the underlying decision process. Differences in judgment certainty are relevant, because they reflect not only the adequacy of the human-machine interface that is evaluated, but also the differences in expertise of the decider and the requirements of the actual situation or task. Therefore, capturing both judgment certainty and discrimination performance is essential. A comparison of different human-machine-interfaces (for air traffic control) is used to illustrate a methodological approach, which allows for integrated analyses of decision processes based on receiver-operator-characteristics and practical guidelines for the evaluation of human-machine-interfaces for safety-relevant operation procedures are provided.
Although the annual traffic accident statistics published by the national police is available in public, the detailed traffic accident data has not been released in Korea. Recently the Ministry of Land, Infrastructure and Transport recognized the importance of in-depth accident data to enhance road traffic safety and initiated a research project to establish a collection of the detailed accident data. The main objective of the project is a feasibility study to establish KIDAS (Korea In-Depth Accident Study). Within this project, three university hospitals which are located in mid-size cities have been selected to collect accident data. Annually, more than 500 cases of accidents have been collected from the in-patient's interviews and diagnosis. Unlike GIDAS (German In-Depth Accident Study), currently on-site investigation can"t be performed by the Korean police. The only available data is patient medical records, patient's description of accident circumstances and the damaged vehicle. Occasionally the police provide the accident investigation reports containing very brief information on accident causation and vehicle safety. In a first step, the concept of KIDAS is to adopt the format of iGLAD (Initiative for the Global Harmonization of Accident Data) for harmonization. Since the currently collected accident information is extremely limited compared with GIDAS, the other sources of data and calculations such as KNCAP vehicle data, pc-crash simulations, vehicle registration information, insurance company data are utilized to complete the iGLAD template. Results from KIDAS_iGLAD and the cases of assessment of active safety devices such as AEBS, ESC, and LDWS will be evaluated.
Für dieses Forschungsvorhaben wurden ca. 2.000 im Verkehr zugelassene Fahrzeuge der Fahrzeugklassen M1/N1, die mit dem OBD-System ausgerüstet sind und ab 01.01.2006 erstmals zum Verkehr zugelassen wurden, im Rahmen der regelmäßigen technischen Überwachung (-§ 29 StVZO) bezüglich der Ergebnisse der OBD-Prüfung und der Endrohrmessung untersucht. Die Untersuchungen wurden dabei von nationalen Überwachungsinstitutionen ausgeführt. Die Prüfungen erfolgten exakt nach den Vorgaben, die in der AU-Richtlinie vom 07.05.2012 (Verkehrsblatt 2012, S. 330) festgelegt sind. Auch wenn gemäß der AU-Richtlinie nach Abfrage des OBD-Systems auf eine anschließende Endrohrmessung verzichtet werden konnte, wurde diese im Rahmen des Forschungsvorhabens zusätzlich durchgeführt. Die Untersuchungen wurden als zufällige Auswahl (tageweise Vollerhebung) und prinzipiell zu gleichen Teilen für Fahrzeuge mit Otto- und Dieselmotoren durchgeführt. Die Untersuchungen fanden im Zeitraum zwischen September 2012 und März 2014 statt. Es wurden die Ergebnisse von 975 Untersuchungen an Fahrzeugen mit Ottomotor sowie 921 Untersuchungen an Fahrzeugen mit Dieselmotor von FSD untersucht und ausgewertet. Untersuchungen mit unvollständigen Daten, nicht plausibler Dokumentationen, nichtbestandener Sichtprüfung, nicht herstellbarer Kommunikation zwischen dem AU-Gerät und dem Fahrzeug oder nicht vollständiger Prüfbereitschaftstests wurden für die weitere Auswertung, d. h. für den Vergleich der Ergebnisse der OBD-Abfrage und der Endrohrmessung verworfen. Die Auswertung erfolgte getrennt nach Diesel- und Ottomotor sowie Euro-Stufen. Damit wurde eine belastbare Datenbasis erarbeitet, die den Umfang von Abweichungen (in Bezug auf "bestanden" / "nicht bestanden") zwischen dem Ergebnis der Messung am Auspuff und der Abfrage des On-Board-Diagnosesystems aufzeigt.
Der Entwurf und der Betrieb von Tunneln im Zuge von Bundesautobahnen sind in den Richtlinien für die Anlage von Autobahnen (RAA 2008) und in den Richtlinien für die Ausstattung und den Betrieb von Straßentunneln (RABT 2006) geregelt. Hier sind die Hinweise zu der Wahl des Tunnelquerschnittes und zu den anzusetzenden Trassierungsgrenzwerten sowie die Anforderungen hinsichtlich Sicherheit und Betriebsabläufen enthalten. Zielsetzung des Forschungsvorhabens war es daher, die Tunnelbauwerke bezüglich ihrer Verkehrssicherheit zu untersuchen. Auf Grundlage der vorhandenen Informationen zur Trassierung wurden die Tunnelbauwerke gemäß ihrer Besonderheiten typisiert. Die Typisierung der 41 untersuchten Tunnel wurde anhand der Merkmale Fahrstreifenanzahl, dem Vorhandensein von Seitenstreifen und Ein- und Ausfahrten in Tunneln sowie der Höhe der zulässigen Höchstgeschwindigkeit vorgenommen. Im nächsten Arbeitsschritt wurde eine makroskopische Unfallanalyse durchgeführt. Für die Analyse wurden die Verkehrsunfallanzeigen bzw. vergleichbare Unfalldaten aus Lieferungen der Polizeidienststellen herangezogen. Darauf aufbauend wurden Unfallkenngrößen der einzelnen Tunnelröhren ermittelt. Das Tunnelkollektiv umfasste Tunnelstrecken sowohl mit als auch ohne Anschlussstellen. In der makroskopischen Unfallanalyse wurden die ermittelten Unfallkenngrößen der Tunnelteilkollektive gegenübergestellt sowie mit denen der Aussenstrecken verglichen. Die Bewertung des Unfallgeschehens in Tunneln führte zu der Erkenntnis, dass eine Anordnung von Seitenstreifen zur Senkung der Unfallrate und der mittleren Unfallkostenrate bei 2-streifigen Tunnelquerschnitten beitragen kann. In der anschließenden mikroskopischen Unfallanalyse wurden die Anschlussstellen innerhalb der Tunnelbauwerke untersucht. Hierbei wurden vor allem die Unfallmerkmale wie Unfallursachen und Unfallumstände näher betrachtet. Die Betrachtung der Lage von Ein- und Ausfahrten in Tunneln hat ergeben, dass diese keine eindeutige Auswirkung auf das Unfallgeschehen hat. Infolge der Ein und Ausfahrvorgänge treten jedoch vermehrt Unfälle in diesen Bereichen auf. Somit sind die Ein- und Ausfahrten in Tunneln nach Möglichkeit zu vermeiden. Darüber hinaus wurde eine Analyse zum Verkehrsablauf in Tunneln durchgeführt. Im Rahmen dieser Analyse erfolgten für ausgewählte Tunnel die Modellierung von q-V-Beziehungen und die Ermittlung von Kapazitätswerten.
Gegenstand des Forschungsvorhabens war es, aus den Ergebnissen zerstörungsfrei arbeitender Messsysteme und erweiterten Informationen (z.B. Aufbau, Alter und Zustand der Strecken) eine Systematik zu entwickeln, mit der die Ermittlung von repräsentativen homogenen Abschnitten möglich ist. Auf vier ausgewählten Beton- und drei Asphaltabschnitten erfolgte die Analyse der ZEB-Daten und der nur lückenhaft vorliegenden Bestandsdaten. Parallel dazu erfolgten Messungen mit dem Georadar. Zur Verifizierung der ZEB-Ergebnisse und zur Interpretation der Ergebnisse der Georadarmessungen wurde zusätzlich eine Streckenbegehung mit visueller Zustandserfassung durchgeführt. Gleichzeitig konnten mit der visuellen Zustandserfassung in begrenztem Umfang fehlende Angaben zur Erhaltungsgeschichte der Fahrbahnen gesammelt werden. Anhand von Bohrkernentnahmen wurden Schichtaufbauten und Schichtdicken ermittelt, die einerseits dem Abgleich mit Bestandsdaten und andererseits zur Kalibrierung der Georadarmessungen dienten. Zu den relevanten Einzelmerkmalen hinsichtlich der strukturellen Substanz wurden homogene Abschnitte gebildet, die in einem weiteren Schritt zu übergeordneten homogenen Abschnitten zusammengefasst wurden. Zur Untersuchung dieser Abschnittsbildung wurden FWD-Messungen durchgeführt und die Abschnittsbildung aufgabenbezogen interpretiert. Aus zwei parallel dazu laufenden Forschungsarbeiten wurden die Ergebnisse von Laborversuchen aus den an diesen Strecken entnommenen Bohrkernen zur Untersuchung der übergeordneten Abschnitte hinzugezogen. Im Ergebnis kann festgestellt werden, dass eine Abschnittsbildung für eine spätere Bewertung der strukturellen Substanz prinzipiell erfolgen kann, wenn relevante ZEB-Daten mit einer visuellen Zustandserfassung präzisiert und mit qualitativ hochwertigen Georadardaten kombiniert werden. Letztere müssen momentan jedoch noch mit großem Aufwand ausgewertet werden. FWD-Daten waren bei den untersuchten Strecken als Ergänzung und Präzisierung nur in einigen Fällen sinnvoll. Bei Strecken mit relativ homogenen Randbedingungen und geringem Schädigungsgrad sind statistisch repräsentative Bohrkernentnahmen dennoch erforderlich, um Abschnittsgrenzen von Homogenbereichen zu detektieren, die dann nur noch von den mechanischen Kenngrößen des gebundenen Oberbaus abhängig sind.
Einsatzbereiche und Einsatzgrenzen von Straßenumgestaltungen nach dem "Shared Space"-Gedanken
(2015)
Aufbauend auf einer deutschlandweiten Städtebefragung sowie einer Literaturrecherche wurden insgesamt 17 nach dem "Shared Space"-Gedanken gestaltete Fallbeispiele (davon 3 Fallbeispiele aus der Schweiz) für eine weitere detaillierte Untersuchung ausgewählt. Für die weiteren Analysen wurden über einen Zeitraum von 12 Stunden Verkehrszählungen, Geschwindigkeitsmessungen sowie Videoaufnahmen durchgeführt. Die Analysen zeigen, dass Umgestaltungen nach dem "Shared Space"-Gedanken Straßen- und Platzräume mit großen Verkehrsstärken im Kfz-Längsverkehr und besonders im Fußgänger-Radfahrer-Querverkehr umfassen. Alle untersuchten Platz- und Straßenräume unterscheiden sich in ihrer Gestaltung deutlich vom angrenzenden Straßennetz. Mit den verschiedenen Möglichkeiten der verkehrsrechtlichen Ausweisung und der hier untersuchten Beschränkung der zulässigen Höchstgeschwindigkeit auf Schrittgeschwindigkeit, 20 km/h oder 30 km/h ergibt sich ein verträgliches Geschwindigkeitsniveau. In Bezug auf das Interaktionsverhalten zwischen Kraftfahrern und den Fußgängern/Radfahrern mit Querungswunsch kann festgestellt werden, dass sich der Kraftfahrer unabhängig der geltenden Vorrangregelung in den meisten Fällen zurücknimmt und dem Fußgänger/Radfahrer die Querung der Fahrbahn gewährt. Voraussetzung ist ein besonderer Überquerungsbedarf, also eine hohe Anzahl an Überquerungen in der Größenordnung von mehr als 200 querenden Fußgängern/Radfahrern in der maßgebenden Stunde. Die Analyse des Unfallgeschehens erbrachte bei insgesamt geringer Anzahl von Unfällen keine aussagekräftigen Ergebnisse bezüglich Gestaltung und straßenverkehrsrechtlicher Ausweisung. Aufbauend auf den Erkenntnissen aus diesem Forschungsvorhaben wurde ein Entwurf zur Fortschreibung der "Hinweise zu Straßenräumen mit besonderem Überquerungsbedarf " Anwendungsmöglichkeiten des 'Shared Space'-Gedankens" (H SBÜ 2011) erarbeitet, der in Kürze veröffentlicht werden soll.
Im derzeitigen Regelwerk der Forschungsgesellschaft für Straßen- und Verkehrswesen können mit Bitumenemulsion gebundene Tragschichten nur unzureichend auf Basis empirischer Erfahrungswerte bei der Dimensionierung eines Oberbaus berücksichtigt werden. Hierzu fehlen Erfahrungen über die Höhe der dimensionierungsrelevanten Materialkenndaten und deren beeinflussende Parameter. Die Auswertung der begleitenden Untersuchungen einer großflächigen Baumaßnahme mit einer bitumendominaten Tragschicht in Kaltbauweise (BAB 30) belegt eine zwar gleichmäßige, aber wenig tragfähige Materialqualität. Mit dem Ziel der Optimierung der dimensionierungsrelevanten Kennwerte einer bitumendominaten Tragschicht in Kaltbauweise wurden zunächst Art und Gehalt der Bitumenemulsion und des Asphaltgranulates variiert. Zur Festlegung der Gemischzusammensetzungen wurden die volumetrischen Kenndaten sowie die zeitliche Entwicklung der Steifigkeiten im Spaltzugversuch ermittelt. Die ermittelten Steifigkeiten zeigen, dass statische Spaltzugfestigkeiten von 1,1 bis über 1,5 MPa nach 28 Tagen Probenlagerung erreicht werden können. Die zum Vergleich herangezogene statistische Auswertung von baubegleitenden Untersuchungen der BAB 30 belegt einen deutlichen Unterschied. Hier lagen die mittleren Spaltzugfestigkeiten nach 28 Tagen nur bei 0,5 bis 0,7 MPa. Die Bruchdehnungen der in diesem Forschungsprojekt untersuchten Gemische von über 2,5 ‰ dokumentieren zudem einen eindeutigen emulsions-dominaten Mischgutcharakter. Auch die statischen E-Moduln sind mit bis zu 5000 MPa als hoch für eine Bitumenemulsion gebundene Asphalttragschicht einzustufen. Mit den ausgewählten Gemischen wurden anschließend Probeplatten mit dem Walzsektor-Verdichtungsgerät hergestellt. Hierzu wurden die Verdichtungsbedingungen leicht modifiziert. An den aus den Probeplatten herausgebohrten Bohrkernen wurden mittels dynamischem Spaltzug-Schwellversuch die Steifigkeiten bei Prüftemperaturen von -10 bis 20 -°C, sowie bei den Prüffrequenzen von 0,1, 1, 5 und 10 Hz bestimmt. Darüber hinaus wurde, ebenfalls im Spaltzug-Schwellversuch, das Ermüdungsverhalten bei 20 -°C ermittelt. Die Ergebnisse der dynamischen Spaltzug-Schwellversuche zeigen, dass die Steifigkeiten der mit Bitumenemulsion gebundenen Asphalttragschichten nicht das Niveau einer Heißasphalttragschicht erreichen. Fast über den gesamten Temperatur- und Frequenzbereich sind deutlich niedrigere Steifigkeiten ermittelt worden. Tendenziell erreichen die Gemischvarianten mit dem weicheren Asphaltgranulat zumindest bei niedrigeren Prüftemperaturen und/oder niedrigeren Prüffrequenzen höhere Steifigkeiten im Vergleich zu den Gemischen mit dem härteren Bindemittel im Asphaltgranulat. Die aus den Laborversuchen abgeleiteten Ermüdungskurven zeigen im Vergleich zum Referenzasphalt eine ähnliche Situation. Auch hier ist ein signifikant schlechteres Verhalten im Vergleich zum Niveau einer Heißasphalttragschicht erkennbar. Ebenso zeigt die Mehrzahl der Gemischvarianten mit dem weicheren Bindemittel im Asphaltgranulat im Vergleich zu den Varianten mit dem härteren Asphaltgranulat ein etwas besseres Ermüdungsverhalten. Die Dimensionierungsberechnungen haben ergeben, dass die Einbindung einer Kaltasphalttragschicht in den hohen Belastungsklassen nur sehr bedingt möglich ist. Hier lassen sich lediglich unter Berücksichtigung einer konventionellen Asphalttragschicht als unterste Asphaltschicht brauchbare Lösungen errechnen. Bei Belastungsklassen Bk3,2 und niedriger konnten wirtschaftlich und bautechnisch sehr sinnvolle Lösungen dargestellt werden. Hier bietet sich offensichtlich ein sehr interessantes Anwendungsgebiet für Kaltasphalttragschichten an. Allerdings haben nur wenige der untersuchten Gemischvarianten zu einer wirtschaftlichen Oberbaudicke geführt. Die Varianten mit dem weicheren Asphaltgranulat (AG1), und hier besonders die Varianten mit hohem Asphaltgranulatanteil lieferten die wirtschaftlichsten Oberbaukonzepte. Zukünftige Forschungsprojekte mit Kaltasphaltbauweisen sollten die mechanische Wirksamkeit des Emulsionswassers in zeitlicher Betrachtung berücksichtigen. Hierzu konnte gezeigt werden, dass auch weit über 28 Tage hinaus noch eine deutliche positive Veränderung der mechanischen Eigenschaften an mit Bitumenemulsion gebundener Asphalttragschichten zu erwarten ist.
SEEKING is looking for answers regarding electric powered bicycles and their relation to traffic safety issues. Does a cyclist need "E"? Is it as risky as riding a moped or are E-bikes creating conflicts with other cyclists? The project described herein, funded by the Austrian Ministry of Transport, has the aim of seeking answers to these hot topics. The SEEKING-team shows an in-depth investigation of vehicle dynamic sensing, together with subjective feedback of test riders to detect similarities and differences between conventional cycling and E-biking. Following an overview on the international status quo, measurement runs and their analyses are performed to find a set of preventative measures to make (E-)biking safer. A specific focus is the detection of curve handling, stopping and acceleration phases as well as conflict studies on course-based test rides and "real world" tests on cycling paths (naturalistic riding).
The study aimed at estimating the impact of pedelecs (with an assumed higher speed than bicycles) on the traffic accident severity in Germany for different penetration rates. The analysis shows that in many real situations (68%) an electrical support of bicycles has no influence on the sequence of accident events. Taking into account a number of unreported "single bicycle accidents", the adoption of similar traffic behavior and similar age distribution, the authors determined a shift of 400 former slightly to seriously injured cyclists in Germany per year. Overall this would be an increase of approximately 2.3% in case of 10% of pedelec penetration with the pessimistic assumption of 10 km/h speed increase although first natural driving studies predict a much lower average speed increase of pedelecs. The hypothesis verbalized in the initial question whether a higher distribution of pedelecs will result in more severe accidents in Germany is not verified. The study shows that electrical support didn"t result in higher collision speed in general. In many accident situations, the speed of pedelecs has only a minor influence on the accident severity. Further research focusing on a possible change of driver behavior especially in new target groups (elderly people) will be needed.
Accidents between right turning trucks and straight riding cyclists often show massive consequences. Accident severity is much higher than in other accidents. The situation is critical especially due to the fact that, in spite of the six mirrors that are mandatory for ensuring a minimum field of sight for the truck drivers, cyclists in some situations cannot be seen or are not seen by the driver. Either the cyclist is overlooked or is in a blind spot area that results from the turning manoeuvre of the truck and its articulation if it is a truck trailer or truck semitrailer combination. At present driver assistance systems are discussed that can support the driver in the turning situation by giving a warning when cyclists are riding parallel to the truck just before or in the turning manoeuvre. Such systems would generally bear a high potential to avoid accidents of right turning trucks and cyclists no matter if they ride on the road or on a parallel bicycle path. However, performance requirements for such turning assist systems or even test procedures do not exist yet. This paper describes the development of a testing method and requirements for turning assist systems for trucks. The starting point of each development of test procedures is an analysis of accident data. A general study of accident figures determines the size of the problem. In-depth accident data is evaluated case by case in order to find out which are representative critical situations. These findings serve to determine characteristic parameters (e.g. boundary conditions, trajectories of truck and cyclist, speeds during the critical situation, impact points). Based on these parameters and technical feasibility by current sensor and actuator technology, representative test scenarios and pass/fail-criteria are defined. The outcome of the study is an overview of the accident situation between right turning trucks and straight driving cyclists in Germany as well as a corresponding test procedure for driver assistance systems that at this first stage will be informing or warning the driver. This test procedure is meant to be the basis for an international discussion on introducing turning assist systems in vehicle regulations.
Ziel des Projekts war eine umfassende, systematische Aufarbeitung des Kenntnisstandes zu Fragen des Mobilitätsverhaltens und -risikos von Personen mit einer Demenzerkrankung. Dabei sollten entsprechende diagnostische Verfahren empfohlen und im Rahmen eines Pre-Tests angewendet werden. Es wurde ein Testprotokoll bestehend aus computergestuetzten Verfahren und Papier- und Bleistifttests zur Messung geteilter, visuell-räumlicher und fokussierter Aufmerksamkeit, allgemeinem Aktivierungsniveau, der Verarbeitung komplexer visueller Reizsituationen, Sensomotorik und Labyrinthlernen erstellt. 46 MCI und 7 Alzheimer-Patienten sowie 11 gesunde Personen wurden untersucht und unterzogen sich einer Fahrverhaltensbeobachtung. Zwischen den drei Untersuchungsgruppen ergaben sich signifikante Leistungsunterschiede bei visueller Informationsverarbeitung, der Geteilten Aufmerksamkeit sowie schwächere Unterschiede bei visuell-räumlicher Aufmerksamkeit. Es wurde ein lineares Strukturgleichungsmodell entwickelt, das die wichtigsten Prädiktoren zur Vorhersage des Fahrverhaltens und ihre Kovarianzen darstellt und durch die erhobenen Daten sehr gut erklärt wird. Demnach tragen die visuell-räumliche Aufmerksamkeit sowie die Geteilte Aufmerksamkeit am meisten zur Vorhersage der Fahreignung bei. Veränderungen im Fahrverhalten, die Vermeidung von Verkehrssituationen und kompensatorisches Verhalten wiederum werden durch den Gesundheitsstatus (Krankheiten, erlebte körperliche und kognitive Beeinträchtigung), die visuelle Informationsverarbeitung (Aktives visuelles Feld) und die visuell-räumliche Aufmerksamkeitsleistung bedingt. Ein Extremgruppenvergleich von 16 Probanden mit sehr guter und 16 Probanden mit eher auffälliger Fahrleistung bestätigt im Wesentlichen das Modell und zeigt zusätzliche Unterschiede beim schnellen visuellen Verarbeiten von Verkehrssituationen und bei der Sensomotorik.
Enhanced protection of pedestrians and cyclists remains on the focus. Besides infrastructural and behavioral aspects it is necessary to exploit technical solutions placed on motorized vehicles. Accident research needs reliable data as well as national road accident statistics. Changing the view on seriously injured road users is one of the challenges which will substantially contribute to the optimization on future traffic safety. The missing accuracy in the definition of personal injury has a detrimental effect on making cost efficient road safety policy which is not only focused on fatal accidents. The European commission requested that, starting in 2015, all EU member states provide more detailed data on the injury status of road casualties, with special regard to the group of seriously injured. Conventional accident data will always be essential. But to obtain detailed data about driver behavior in real traffic situations further data sources are required. These could be EDR data, data from electronic control units, data from traffic surveys and traffic counting, naturalistic diving studies and field operational tests. Gaining insight into normal as well as critical driver behavior will enable accident researchers to deduct functions estimating the increase or decrease of accident risk associated with certain behaviors or vehicle functions. Also with view to the introduction of highly automated driving functions in the future such data is urgently needed. Computer simulation based tools to estimate the benefits of active safety systems are another step on the way towards the safety assessment of automated driving. It is now the duty of the scientific community to ask the right questions, to develop a methodology and to merge all these data sources into a common framework for the assessment of future traffic safety innovations.
Within the COST Action TU1101 the working group WG 1 is dealing with acceptance criteria and problems in helmet use while bicycling concerning conspicuity, thermal stress, ventilation deficits and other potential confounding. To analyze the helmet usage practice of bicyclists in Europe a questionnaire was developed in the scope of working group 1 to collect relevant information by means of a field study. The questionnaire consists of some 66 questions covering the fields of personal data of the cyclist, riding und helmet usage habits, information concerning the helmet model and the sensation of the helmet, as well as information on previous bicycle accidents. A second complementary study is conducted to analyze if the use of a bicycle helmet influences the seating geometry and the posture of cyclists when riding a bicycle and if the if the helmet vertically limits the vision. For this purpose cyclists with and without helmets were photographed in real world situations and relevant geometrical values such as the decline of the torso, the head posture of the upper vertical vision limit due to the helmet were established from the photos. The interim results of the field studies which were conducted in Germany by the Hannover Medical School are presented in this study. Some 227 questionnaires were filled out, of which 67 participants had used a helmet and 42 of the 227 participants have had a bicycle accident before. For the analysis of the riding position and posture of the cyclist over 40 pictures of riders with a helmet and over 240 pictures of riders without a helmet were measured concerning the seating geometry to describe the influence of using a bicycle helmet. Some results in summary: From the riders interviewed with the questionnaire only 11% of the city bike riders and 12% of the mountain bike riders always used the helmet, while 38% of the racing bike riders and 88% of the e-bike-riders always used the helmet. The helmet use seems not to change the sensation of safety of cycling compared to the use of a car. The arguments for not wearing a helmet are mostly stated to be the short distance of a trip, high temperatures or carelessness and waste of time. The reasons for using a helmet are stated to be the feeling of safety and being used to using a helmet. Being a role model for others was also stated to be a reason for helmet use. Concerning the sensation of the helmet 9% of the riders reported problems with the field of vision when using a helmet, 57% saw the problem of sweating too much, and 10% reported headaches or other unpleasant symptoms like pressure on the forehead when using the helmet. The analysis of the seating posture from the pictures taken of cyclists revealed that older cyclists generally have a riding position where the handle bar is higher than the seat (0-° to 10-° incline from seat to handlebar), while younger riders had a higher variance (between -10-° decline and 20-° incline). Further, elderly riders and riders with helmets seem to have a more upright position of the upper body when cycling. The vertical vision limit due to the helmet is determined by the front rim of the helmet (mostly the sun shade). Typical values here range from 0-° (horizontal line from the eye to the sun shade) to 75-° upwards, in which elderly riders tend to have a slightly higher vertical vision limit possibly due to the helmet being worn more towards the face.
Since a number of human models have been developed it appears sensible to use these models also in the accident analysis. Especially the understanding of injury mechanisms and probably even injury risk curves can be significantly improved when interesting accidents are reconstructed using human body models. However, an important limitation for utilising human models for accident reconstruction is the effort needed to develop detailed FE models of the accident partners or to prepare the human model reconstruction by running physical accident reconstructions. The proposed approach for using human models for accident reconstruction is to use simplified and parametric car models. These models can be adapted to the crash opponents in a fast and cost effective way. Although, accuracy is less compared to detailed FE models, the relevant change in velocity can be simulated well, indicating that the computation of a detailed crash pulse is not needed. Two frontal impact test accidents that were reconstructed experimentally and using the parametric car models are indicating sufficient correlation of the adapted parametric car models with the full scale crash reconstructions. However, further developments of the parametric models to be capable for the use in lateral impacts and rear impacts are needed. For the PC Crash simulation runs the output sampling rate is too large to allow sufficient analysis. In addition the performance appears to be too general.
The current paper reports on the results of a pilot study aiming to investigate the effect of mobile telephone use on the driving performance of 5 amateur and 5 professional drivers. Their driving acuity was tested through a driving simulator. Analysis and interpretation of the results occurred comparing the drivers' driving performance while talking, reading messages and writing a message on the mobile phone (intervention time) with the drivers' driving performance engaged in no activity (control time). The variables affected by the mobile phone were the "steering", the "lane offset" and the "duration of lane offset". Moreover, the drivers involved in a car crash in the last five years appeared to differ from those who were not involved in a crash in both "lane offset" and "following distance". The results of this pilot study will inform the design of a large experimental study on 50 professional and 50 amateur drivers.
This study aimed at comparing head Wrap Around Distance (WAD) of Vulnerable Road User (VRU) obtained from the German in-depth Accident Database (GIDAS), the China in-depth Accident Database (CIDAS) and the Japanese in-depth Accident Database (ITARDA micro). Cumulative distribution of WAD of pedestrian and cyclist were obtained for each database (AIS2+) showing that WAD of cyclists were larger than the ones of pedestrians. Comparing three regions, the 50%tile WAD of GIDAS was larger than that of both Asian accident databases. Using linear regression that might predict WAD of pedestrians and cyclists from Impact speed and VRU height, WADs were calculated to be 206cm/219cm (Pedestrian/Cyclist) for GIDAS, 170cm/192cm for CIDAS and 211cm/235cm for ITARDA. In addition, this study may be helpful for reconsideration of WAD measurement alignment between accident reconstruction and test procedures.
Event data recorders (EDRs) are a valuable tool for in-depth investigation of traffic accidents. EDRs are installed on the airbag control module (ACM) to record vehicle and occupant information before, during, and after a crash event. This study evaluates EDR characteristics and aims at better understanding EDR performance for the improvement of accident reconstruction with more reliable and accurate information regarding accidents. The analysis is based on six crash tests with corresponding EDR datasets.
Ruptures and dissections of the thoracic and abdominal aortic vessel caused by traffic accidents are rare but potentially life-threatening injuries. They can occur by blunt trauma via seat belt or dashboard injury. The study aimed at evaluating the overall mortality, morbidity, neurological disorders, and differences in operative procedures of open repair and stenting. It shows that, with a change and improvement in diagnostic tools and surgical approach, mortality and morbidity of blunt aortic injuries were significantly reduced. Still an immediate life-threatening injury early diagnosis via multiple-slice and scans and surgical repair with minimally invasive stents showed excellent short-time results for selected patients.