Filtern
Erscheinungsjahr
- 2013 (153) (entfernen)
Dokumenttyp
- Konferenzveröffentlichung (82)
- Buch (Monographie) (43)
- Wissenschaftlicher Artikel (21)
- Teil eines Buches (Kapitel) (3)
- Bericht (2)
- Arbeitspapier (2)
Sprache
- Deutsch (77)
- Englisch (75)
- Mehrsprachig (1)
Schlagworte
- Deutschland (104)
- Germany (103)
- Konferenz (55)
- Conference (54)
- Research report (36)
- Forschungsbericht (35)
- Safety (29)
- Sicherheit (29)
- Accident (25)
- Bewertung (24)
The grip between the road surface and vehicle tires is the physical basis for the moving of all vehicles in road traffic. In case of an accident the available grip level is one of the most relevant influence factors, influencing the causation and the procedure of the accident. However, the estimation of the grip level is not easy and therefore, is commonly not done on the accident scene. This is especially true for the measurement of the water depth. Until now, real accident databases provide no measurement data about the grip level and the water film depth and thus, the estimation of its influence is not possible yet. From the tyre manufacturers point of view, it is important to know about the road conditions (namely grip level, macro-texture, water depth, temperature) at the accident scene, as well as the operating conditions of the vehicles (braking, loss of control, speed, etc). These data is necessary to define relevant tyre traction tests for the end-user and for regulations. For this reason VUFO and Michelin developed a consistent method for the measurements of grip level and water depth for the accidents of the GIDAS database. The accident research team of Dresden, which documents about 1000 accidents with at least one injured person every year, is measuring the micro-roughness and the macro-roughness directly on the spot. For the measurement of the micro-roughness a Skid Resistance Tester (British Pendulum) is used. The Mean Texture Depth (describing the macro-roughness) is measured by the Sand Depth Method. Since June 2009, measurements for more than 700 accidents including 1200 participants have been carried out. In case of wet or damp road conditions during the accident, the water depth is measured additionally. Therefore VUFO and Michelin developed a special measurement device, which allows measurements with an accuracy of 1/10 millimetre. The measurement point at the accident scene is clearly defined and thus, the results are comparable for all different accidents and participants. The use of the GIDAS database and the accident sampling plan allows representative statements for the German accident scenario. With this data it is possible for the first time to have an accurate view of the road conditions at the accident scene. One possibility is a more detailed estimation of hydroplaning accidents using the actually measured water depths. The development of new testing methods and new tires can be based on the real situation of the road infrastructure. Furthermore, the combination of the technical GIDAS data and the measured road surface properties can also be used for the estimation of effectiveness of several safety systems like the brake assist and/or emergency braking systems. The calculation of a reduced collision speed due to the use of a brake assist is only one example for the application of real measured grip level data.
The GIDAS-investigation team of Dresden (VUFO) has documented more than 11.500 accidents since 1999. The documentation of the accident includes beside vehicle-, injury- and environmental-data very detailed reconstruction data. Within this accident investigation the VUFO began to record the skid resistance of the accident site in 2009. The measurements are divided in macro- and microroughness (Sand depth method and Portable Skid Resistance Tester-SRT-by Munro-Stanley London-©). Both methods are used to determine the skid resistance for more than 1000 passenger cars. The aim of the present study is to find out a relationship between the measured skid resistance, the road conditions and the friction coefficient, which is used to calculate the maximum accelerations and decelerations during a reconstruction of an accident. Basic approach to convert the SRT-value into the friction coefficient is the calculation of the theoretical absorbed energy of the spring rubber system of the swinging arm of lever. This absorbed energy is used to get the friction coefficient by using the equations for the work of friction. To consider the road-behavior, in correlation to the friction coefficient, the results will be merged with existing literature. Last step for this study will be a comparison between actual used friction coefficients all over the GIDAS-database and the theoretical results. The study shows, if it is possible to use the SRT-Measurement for the estimation of a friction coefficient for the reconstruction of a traffic accident. As expected, the GIDAS-Database and the additional measurement of the roughness of the road directly on the spot are an enormous useful dataset.
Der Weg zur Schule soll für alle Kinder möglichst sicher sein. An vielen Orten gibt es auf dem Schulweg allerdings Gefahrenstellen, zum Beispiel unübersichtliche Kreuzungen, Ampeln mit langer Wartezeit oder sehr schmale Gehwege. In solchen Fällen kann ein Schulwegplan die Sicherheit der Schülerinnen und Schüler deutlich verbessern. Der Schulwegplan ist eine kartografische Darstellung des Umfelds einer Schule, die sichere Querungsstellen, Gefahrenstellen und deren Bewältigung sowie günstige Wege vom Wohnort der Kinder zur Schule aufzeigt. Schulwegpläne sind in den meisten Bundesländern nicht verbindlich vorgeschrieben. Dort, wo Schulwegpläne "empfohlen" werden oder "verbindlich" zu erstellen sind, sind konkrete Hinweise für die Art der Umsetzung in der Regel nicht verfügbar. Der Leitfaden wendet sich deshalb an Laien - Eltern, Schulen, Kommunen, Polizei und alle, die einen Schulwegplan mit vertretbarem Aufwand selbst erstellen wollen. Einleitend werden beispielhaft Schulwegpläne für Grundschulen und weiterführende Schulen vorgestellt. Um in den "Prozess Schulwegplan" einsteigen zu können, werden Informationen zur Startphase gegeben und die nötigen Bestandsaufnahmen und Analysen erläutert. Es wird dargestellt, wie hochwertige Schulwegpläne selbstständig und ohne Zusatzkosten erstellt werden können und wie anschließend eine Wirkungskontrolle zur Überprüfung der Maßnahmen durchgeführt wird. Des Weiteren werden Hinweise auf weitere Vorlagen und Materialien, die ergänzend genutzt werden können, gegeben.
Analysis of the accident scenario of powered two-wheelers on the basis of real-world accidents
(2013)
For the first time since 20 years the German national statistics of traffic accidents revealed an increasing number of fatalities and seriously injured persons in 2011. This negative development was especially caused by increasing numbers in all groups of vulnerable road users (VRU). Furthermore, the comparison of fatality reduction rates between several categories of road users shows that persons on motorcycles show the worst performance over years. Although every second fatality in German traffic accidents is still a car occupant, users of PTW make up more than 20% in the meantime. Assuming further improvements in the field of occupant protection this trend will continue. For that reason, a study on the basis of real-world accidents was conducted to describe the accident scenario involving motorcycles and to identify the reasons of the above-described fact. Approximately 1.800 motorcycle accidents out of GIDAS database were used for the analyses. The first part of the study deals with the question how representative the GIDAS database is for the German motorcycle accident scenario. Afterwards, detailed descriptive statistics on motorcycle accidents were presented considering numerous parameters about the accident scene, environmental influences, vehicle information, individual characteristics, interview data, injury severity and injury causation. One important point is the identification of the most frequent critical situations that are typical for motorcycle accidents. Furthermore, a special focus was on accident causation. Finally, conspicuous facts out of the analysis are emphasized. All in all, the study gives a comprehensive overview about the German motorcycle accident scenario. One the one hand, the use of weighted GIDAS data allows representative and robust statements on the basis of large case numbers; on the other hand highly detailed conclusions can be drawn. The results of the study help to understand the particularities of motorcycle accidents and provide approaches for further improvements in the field of PTW safety.
10 % bis 20 % der Straßenverkehrsunfälle werden auf Müdigkeit am Steuer zurückgeführt. Es steht eine Vielzahl unterschiedlicher Methoden zur Verfügung, um Müdigkeit beim Fahrer zu erkennen. Ziel des vorliegenden Projekts war es, die Stärken und Schwächen der verschiedenen Müdigkeitsmessverfahren vergleichend zu beschreiben und existierende Müdigkeitsmess- und Müdigkeitswarnsysteme im Überblick darzustellen. Die Ergebnisse beruhen auf folgender Verknüpfung von Literaturanalysen, Experten- und Nutzerbefragungen: • Literaturanalyse und zusammenfassende Darstellung von Müdigkeitsmessverfahren, die auf physiologischen und leistungsbezogenen Messgrößen beruhen. • Literaturanalyse zu Müdigkeitsmess- und Warnsystemen, Befragung der Systemhersteller und zusammenfassende Darstellung der identifizierten Systeme. • Befragung von 20 Nutzern von den in Mittel- und Oberklassefahrzeugen implementierten Müdigkeitswarnsystemen zur Beurteilung der wahrgenommenen Detektionsgüte, Akzeptanz und Compliance. • Erarbeitung eines Gütekriterienkatalogs als Grundlage für die Bewertung und den Vergleich ausgewählter Müdigkeitsmessverfahren. • Zweistufige Befragung von 12 Experten aus Industrie- und Hochschulforschung nach der Delphi-Methode. Ziel war die Auswahl und Bewertung der validesten Verfahren zur Erfassung der Fahrermüdigkeit, begründeter Zweitbewertungen bei abweichenden Urteilen und der Beurteilung ihrer Eignung für verschiedene Einsatzgebiete. • Workshop mit den Delphi-Teilnehmern zur Diskussion und Ergänzung der Delphi-Ergebnisse. Die 70 in der Fachliteratur identifizierten Müdigkeitsmesssysteme unterscheiden sich in den zugrunde liegenden Müdigkeitsmessverfahren, dem Vorliegen und der Gestaltung von Warnfunktionen und ihrer Verbreitung. Nur selten werden überzeugende Validierungsbelege oder Angaben zur Anzahl falscher und ausbleibender Alarme angeführt. Aus Nutzersicht bieten die derzeit in Mittel- und Oberklassemodellen verfügbaren Müdigkeitswarnsysteme oftmals keine zufriedenstellende Detektionsgüte. Vielfach wird die Fahrt trotz detektierter und selbst eingestandener Müdigkeit fortgesetzt. Ca. die Hälfte der Fahrer sieht in der Nutzung der Müdigkeitswarnsysteme einen Zuwachs an Sicherheit. Zu den validesten Müdigkeitsmessverfahren gehören aus Expertensicht die Erfassung der Fahrperformanz (Lenkverhalten und Spurhaltung) und des Lidschlussverhaltens, das videobasierte Expertenrating, das EEG und der Pupillografische Schläfrigkeitstest. Die unterschiedlichen Stärken und Schwächen der sechs ausgewählten Messverfahren werden im Bericht detailliert aufgeführt. Nach wie vor existiert kein Goldstandard zur Müdigkeitserfassung. Je nach Einsatzgebiet sind entweder alle sechs ausgewählten Messverfahren (Forschung & Entwicklung), nur einige (Müdigkeitswarnsystem im Fahrzeug) oder kein einziges (Verkehrskontrolle) geeignet. Die Auswahl der Messverfahren sollte daher in Abhängigkeit des jeweiligen Ziels und Kontexts der Müdigkeitserfassung erfolgen und die spezifischen Stärke-Schwächenprofile berücksichtigen. Eine valide Müdigkeitserfassung bedarf der Kombination von mindestens zwei Messverfahren. Bedarf besteht in der Optimierung und der begleitenden Evaluierung der Müdigkeitswarnsysteme im Fahrzeug und der vielversprechendsten Messverfahren. Weitere Maßnahmen zur wirksamen Reduzierung müdigkeitsbedingter Unfälle wurden im Rahmen des Expertenworkshops diskutiert und im Bericht dargelegt.
The sequence of accident events can be classified by three essential phases, the pre-crash-sequence, the crash-sequence and the post-crash-sequence. The level of reliability of the information in the GIDAS-database (German In Depth Accident Study) is provided predominantly on the passive side. The period to evaluate active safety systems begins already in the pre-crash-sequence. The assessment of the potential of sensor- or communication-based active safety systems can only be accomplished by a detailed analysis of the pre-crash-phase. Hence the necessity to analyze the early period of the accident event in detail arises. This is possible with the help of the digital sketches of the accident site and the simulation of the accident by a simulation method of the VUFO GmbH. After simulating the pre-crash scenario it is possible to generate additional and standardized data to describe the pre-crash-sequences of an accident in a very high detail. These data are documented in a second database called the GIDAS Pre-Crash-Matrix (PCM). The PCM contains various tables with all relevant data to reproduce the pre-crash-sequence of traffic accidents from the GIDAS database until 5 seconds before the first collision. This includes parameters to describe the environment data, participant data and motion or dynamic data. This paper explains the creation of the PCM, the simulation itself and the contents and structure of the PCM. With this information of the pre-crash-sequence for various accident scenarios an improved benefit estimation and development of active safety systems can be made possible.
The increasing economics in India has an enormous growth of its road traffic. As observed from official Indian accident statistics the number of road fatalities are one of the highest worldwide. In contrast to most industrialized nations they have an rapidly increasing trend. To come along with this trend it becomes more than essential to understand the traffic accident situation. The official Indian accident statistics gives a glimpse of only basic information. Therefore more detailed data is needed. By using In-depth accident data and officially representative statistics the current accident situation can be evaluated in India, if a suitable weighting methodology is considered. Hence in 2009/2010 a pilot study with the collaboration partner JP-Research India pvt. Ldt. was gathered in Tamil Nadu in south of India. In-depth accident investigations were done around the Coimbatore area on four highways. At first, the collected data is evaluated. Due to consequent and continuous further development based on the first approach a methodology similar to NASS/CDS/GES in the US and GIDAS in Germany was developed. Of course all relevant accident related parameters including pictures and severity information were collected. As a matter of fact based on scaled sketches and reconstruction benefit analyses can be done in order to analyze the accident scenery in India. As a first outcome influence from infrastructure, missing education and vehicle safety were identified as key parameters in order to reduce the number of accidents and casualties. To compare the accident situation against international standards an accident classification for left hand traffic was developed based on the German Insurance classification system. Looking into detail additional accident types were identified and added to create an Indian accident type catalogue. The positive results encouraged several OEMs to participate in this investigation and together with BOSCH a consortium was established in 2010/11. Within one year from beginning in May 2011 about 200 highway accidents were collected, reported and reconstructed using the new standard. Hence a first good overview of the accident situation is available for the Coimbatore Tamil Nadu area. The major target for establishing accident investigations is the extension towards other states of India and urban areas to achieve a better overview of the accident scenery. Therefore local and national authorities have to be embedded in order to strengthen the awareness against traffic safety.
Zur Überwachung der Verkehrsentwicklung und zur Ermittlung der Verkehrsstärken auf den Bundesfernstraßen - Bundesautobahnen und Bundesstraßen - fand im Jahr 2010 wieder eine bundesweite Straßenverkehrszählung (SVZ 2010) im Rahmen des üblichen Fünfjahres-Turnus statt. Die Länder hatten die Möglichkeit, auch das nachgeordnete Netz (Landes- und Kreisstraßen) zu zählen und im Rahmen der SVZ 2005 auswerten zu lassen. Bundesweit war der Zählumfang auf diesen Straßen jedoch zu gering, um allgemeine, für das gesamte Bundesgebiet gültige Aussagen für diese Straßenkategorie zu treffen. Der vorliegende Bericht beinhaltet eine detaillierte Beschreibung der Erhebungs- und Hochrechnungsmethodik zur Ermittlung der durchschnittlichen täglichen Verkehrsstärken (DTV) sowie eine Darstellung der Berechnung von Kenngrößen (Bemessungsverkehrsstärken und Werte für "Lärmberechnungen", für die eine vorherige Ermittlung der DTV-Werte Voraussetzung ist. Die methodischen Erläuterungen werden ergänzt durch beispielhafte Berechnungen. Am Ende des Berichtes steht ein Vergleich mit der Straßenverkehrszählung 2005, in dem auf wesentliche Änderungen und deren Auswirkungen eingegangen wird.
Im von der DG Home (CIPS Program) geförderten Projekt "SecMan " Security Manual for Road Infrastructures" wurde ein vierstufiges Verfahren zur Identifikation kritischer Straßeninfrastrukturen, ihre Bewertung hinsichtlich diverser von Menschen verursachter Gefahren sowie die Bestimmung effektiver Schutzmaßnahmen entwickelt. Diese Ergebnisse wurden in einem ganzheitlichen "best-practice" Handbuch zusammen getragen, welches einen trans-nationalen Sicherheitsmanagement-Ansatz für Betreiber und Eigentümer von Straßeninfrastrukturen in Europa ermöglicht. Im Folgenden wird die entwickelte Methodik vorgestellt, ausgehend von der Bewertung der Netzkritikalität über die Attraktivität und Vulnerabilität eines Bauwerks hin zu einer Bewertungsmethodik für die Auswahl geeigneter Schutzmaßnahmen.
Straßenverkehrszählungen (SVZ) mit mobilen Mess-Systemen : Erhebungs- und Hochrechnungsmethodik
(2013)
Für die nächste Straßenverkehrszählung (SVZ) im Jahre 2015 soll für Abschnitte zweistreifiger Bundesstraßen der temporäre Einsatz mobiler Messsysteme nach einem Rotationsprinzip ermöglicht werden. Dazu wurde in einer 1. Stufe ein Erhebungs- und Hochrechnungskonzept entwickelt, um mit möglichst wenigen Geräten die jährliche Verkehrsstärke und spezielle Kennwerte zuverlässig abzuleiten. Die Grundlage der Hochrechnung bilden die zeitgleich (synchron) zu den temporären Zählungen betriebenen Dauerzählstellen in einer Raumeinheit. Anhand dieser Daten wurden die zentralen Fragen wie Dauer, Häufigkeit und Lage der Zählungen innerhalb des Jahres untersucht. Das Einsatzmodell sieht insgesamt drei Wochen vor. Werktags- und Sonntagsverkehr werden mit zwei um einige Monate versetzte Wochenzählungen außerhalb der Ferien erfasst, der Urlaubsverkehr durch eine Wochenzählung innerhalb der Sommerferien. Die Hochrechnungsfaktoren für die einzelnen Zählwochen ergeben sich aus linearen multiplen Regressionsfunktionen. Deren Koeffizienten werden aus den Dauerzählstellen mit den Einflussgrößen Ferienverkehrs-, Sonntags- und Freitagsfaktoren errechnet. Die Kennwerte, insbesondere "Lärmwerte" und Bemessungsverkehrsstärken, können zum Teil direkt aus den Zähldaten bzw. indirekt über Regressiosansätze abgeleitet werden. In einer 2. Stufe wurde anhand von Dauerzählstellen der Jahre 2000 bis 2010 analysiert, wie die einzelnen Jahresergebnisse auf ein einheitliches Basisjahr übertragen werden können. Wegen der größeren Entwicklungsunterschiede sollte dabei zwischen Werktags- und Sonntagsverkehr sowie zwischen Personen- und Güterverkehr unterschieden werden. In einer 3. Stufe wurden Wege aufgezeigt, wie für Zählungen im Rahmen von Sonderuntersuchungen eine schnelle Ergebnisbereitstellung ermöglicht werden kann. Dies ist notwendig, da die endgültigen Ergebnisse der Dauerzählstellen, die Voraussetzung für die Ableitung der Hochrechnungsfaktoren sind, erst am Anfang des Folgejahres vorliegen. Je nach Einsatzzeit können die Ergebnisse aus den Wochenzählungen als Näherungswerte übernommen werden. Für allgemeine Anwendungen wurden Hinweise zur Entwicklung einer Software-Lösung gegeben.
With an ever rising human life expectancy the share of elderly people in society is constantly rising. This leads to the fact that at the same rate the share of people with age related diseases such as dementia and poor eyesight taking part in traffic will rise and therefore traffic accidents caused by this group of people due to the disease will play an ever greater role. This Situation will be among the future challenges of road safety work. At present this study displays specific characteristics of accidents caused by elderly car drivers (aged 65 or higher) based on the analysis of the German In-Depth Accident Study GIDAS. Herein almost 1000 elderly car drivers were identified as accident participants in the years 2008 to 2011. The focus of this study lies on identifying special types of accidents which are caused by elderly drivers and on characterizing these types with the information gathered on scene and by interviewing the participants. The main evidence analyzed is the knowledge about the accident locality, the trajectories of the participants as well as the reasons for the occurrence of the accidents. Furthermore personal information such as the personal condition before the accident and driving purposes is used to identify patterns of contributing circumstances for accidents caused by elderly traffic participants.
Having a look at safety to traffic and the prevention of accidents it can be observed that technical improvements in active safety of vehicles have let to various positive effects in this area. Among other components the tyre-road-contact takes a key role in the development of active safety technologies. All forces in accelerating, breaking and vehicle guidance have to be transmitted through the tyre-road contact area by friction forces. A common way to characterize a friction process is to identify the coefficient of friction μ between two touching materials. Even though there are several approaches to experimentially characterise road surfaces, no standard method exists. In this paper an overview of existing test methods is given. Furthermore the preliminary design of a newly developed portable test device with its possibility to investigate the tyre-road-friction of arbitrary roads or even places of accidents is shown.
Auf Basis des HBEFA 3.1 wurde das Emissionsmodul grundlegend überarbeitet. Die Emissionsberechnung kann nunmehr für die Bezugsjahre 2005 bis 2030 erfolgen. Aktualisiert wurden auch die PM10-Emissionsfaktoren für Aufwirbelung und Abrieb. Für freie (nicht überdeckelte Strecken) im guten Fahrbahnzustand sollten für den Leichtverkehr (LV) für alle Verkehrssituationen mit Tempolimit größer 50 km/h unabhängig vom Level of Service 30 mg/(km • Fzg) sowie für den Schwerverkehr (SV) 130 mg/(km • Fzg) verwendet werden. Für Tunnelstrecken werden für den LV 5 mg/ (km • Fzg) sowie für den SV 130 mg/(km • Fzg) vorgeschlagen. Für Straßen im schlechten Zustand sind diese Werte mit dem Faktor 2 zu multiplizieren. Für die Ermittlung der nicht motorbedingten PM2.5-Emissionen (Reifen-, Straße- und Bremsabrieb) wird der Ansatz aus CORINAIR vorgeschlagen. Kupplungsabrieb und Wiederaufwirbelung von Straßenstaub können nach derzeitigen Erkenntnissen vernachlässigt werden. Es wurde auch ein entsprechender Berechnungsvorschlag für Benzo(a)pyren-Emissionsfaktoren abgeleitet. Er basiert auf Emissionsfaktoren aus einer Studie des Schweizer Bundesamtes fuer Umwelt, Wald und Landschaft. Die bisher in MLuS integrierten gebietstypischen Vorbelastungswerte wurden anhand vorliegender Messdaten aus den Jahren 2000 bis 2006 aktualisiert. Neu wurden Vorbelastungsdaten für PM2.5 abgeleitet, da diese bisher in MLuS noch nicht vorgesehen waren. Die Änderungen der Vorbelastungswerte werden wie bisher tabellarisch in Form von Reduktionsfaktoren der Schadstoffbelastung angegeben. Die Abschätzungen der immissionsseitigen Wirkungen von Lärmschutzwänden- und -wällen wurden auf der Grundlage von mikroskaligen Modellrechnungen (MISKAM) quantifiziert und mit Windkanalmessungen bzw. Ergebnissen aus der Literatur abgeglichen. Nunmehr können Lärmschutzwände und Lärmschutzwälle bis 10 m berücksichtigt werden. Als NO-NO2-Konversionsmodell wird nunmehr ein vereinfachtes Chemiemodell auf Basis der Beschreibung der chemischen Umwandlung im Gleichgewicht der Stoffe NO2, NO und Ozon verwendet. Die Funktion zur Abschätzung der Überschreitungshäufigkeiten des NO2-Stundengrenzwertes wurde anhand von Messdaten der Jahre 2000 bis 2009 aktualisiert. Mit den zuvor erläuterten Ergebnissen wurde eine grundlegende Aktualisierung des PC-Programms durchgeführt. In Absprache mit dem zuständigen FGSV-Arbeitskreis wird das Programm "Richtlinien zur Ermittlung der Luftqualität an Straßen ohne oder mit lockerer Randbebauung" (RLuS) heißen. Die Onlinehilfe und das Handbuch zum Programm wurden ebenfalls aktualisiert. Abgeschlossen wurde auch im Rahmen des hier vorliegenden Projektes die Neuformatierung der RLuS-Broschüre.
Im gegenstädlichen Forschungsbericht werden zunächst die Grundlagen der geothermischen Energienutzung beschrieben. Dies beinhaltet Anforderungen an den Energienutzer, Einflüsse aus den vorhandenen Untergrund- und Grundwasserverhältnissen sowie dem Fundierungskonzept des Bauwerkes bzw. dessen Bauwerksstruktur. Weiters werden die derzeit vorhandenen Absorbersysteme sowie deren Betriebsweisen beschrieben. Für die Planung einer Tunnelthermie-Anlage wurde ein Planungsleitfaden erstellt, der zunächst die wesentlichen Einflussfaktoren für eine technisch-wirtschaftliche Planung einer Erdwärmeanlage sowie deren Betrieb, Ausfallrisiken und einen Überblick über die rechtlichen Rahmenbedingungen enthält. Der Planungsleitfaden beinhaltet schließlich auch eine Beschreibung der einzelnen Projektstufen, die im Zuge der Planung und Umsetzung einer Tunnelthermie-Anlage zu absolvieren sind. Weiters wurde eine Planungssystematik erarbeitet, die die Angabe wesentlicher Entwurfskriterien beinhaltet, die im Zuge der Planung einer Tunnelthermie-Anlage zu beachten sind. Für die Dimensionierung einer Tunnelthermie-Anlage bedarf es diverser Parameter, die im Vorfeld zu erkunden sind. Diese werden diskutiert und es werden Empfehlungen zur thermischen Erkundung in Kombination mit üblichen geotechnischen Aufschlüssen angeführt. Technische Detaillösungen wurden für beispielhafte Tunnelthermie-Anlagen entwickelt, beschrieben und dargestellt. Darauf aufbauend wurde der Einsatz der Massivabsorbertechnologie bei üblichen deutschen Straßentunneln untersucht. Für die Gestaltung eines Bauvertrages im Zuge der Ausschreibung einer Tunnelthermie-Anlage wurden Empfehlungen erarbeitet. Weiters wird die Schnittstelle zwischen der Erdwärmeanlage und der Haustechnik sowie zwischen dem geothermischen Fachplaner des Auftraggebers und jenem des Auftragnehmers definiert. Abschließend wurden beispielhafte Leistungspositionen für Tunnelthermie-Anlagen erstellt.
There is a need to continue to set the right vehicle safety policy priorities in the future. Research has to point out the most cost efficient and safety relevant measures to further reduce the number of road traffic casualties. The overall development shows that the constant and rapid decrease in the number of road casualties slows down. New innovations need to enter the vehicle market soon, in order to continue the success achieved in the last decade. Priorities for vehicle safety are driven by safety and mobility demands. It is necessary to keep a strong lid on all aspects of elderly and vulnerable road users. The fraction of powered-two-wheelers (PTW) is a priority group. PTWs have a risk of being involved in an accident, 14times higher than that of a passenger car. However, the figures do also show that every second fatality is a car occupant. Therefore passenger car safety remains to be top priority. Heavy goods vehicles are overly represented in fatal accidents, addressing the need to make these vehicles more compatible with other road users. These facts highlight the necessity not only to increase vehicles" self protection, but also to make cars - and trucks - more compatible and safe. Cycling is a strongly increasing mode of transport. This is a further reason to demand better protection for cyclists and pedestrians from car design and car active and integrated safety systems. Another priority for future vehicle safety is related to demographics. It is less known that the purely demographic effect will be superimposed by an increasing wish of elderly people to be mobile. However, elderly people show deficits concerning their biomechanics. This emphasizes the need for better and more adaptive restraint systems, but also further technological challenges and demands for active safety systems. However, in order to progress, current technological limitations have to be overcome. Cost benefit considerations, but also consumer acceptance and desires, will drive this process.
Die Ermittlung von Grundunfallkostenraten und Quantifizierung von Zuschlägen für Landstraßenquerschnitte sind Ziel dieses Forschungsvorhabens. Die Ergebnisse sollen eine Bewertungsgrundlage im Handbuch für die Verkehrssicherheit von Straßen (HVS) darstellen. 3.600 km Landstraße aus sechs Bundesländern liegen dem Untersuchungskollektiv zu Grunde. Neben dem mehrjährigen Unfallgeschehen bilden Daten der SIB und Erhebungen aus Streckenbefahrungen die Datengrundlage der Untersuchungen. Die Zuordnung der Streckenabschnitte erfolgte in Anlehnung an den Entwurf der Richtlinie für die Anlage von Landstraßen (RAL) in fünf verschiedene (Regel-) Querschnittsgruppen. Multivariate Modelle zur Beschreibung der Unfallhäufigkeit bilden die mathematische Grundlage der Analyse. Gegenüber monokausalen Betrachtungen weisen sie den Vorteil auf, eine Vielzahl von Einflussgrößen zu erfassen sowie mögliche Abhängigkeiten zwischen verschiedenen Variablen zu berücksichtigen. Für die verschiedenen Straßenquerschnitte und Einmündungen mit Vorfahrtregelung durch Verkehrszeichen wurden jeweils drei Modelle nach Unfallschwere erstellt. Zu Grunde liegende Merkmale wurden auf ihren signifikanten Erklärungsanteil zur Beschreibung der Unfallhäufigkeit geprüft und entsprechend im Modell als Zuschlag berücksichtigt. Auf Basis dieser Ergebnisse wurden Funktionen zum Verlauf der Unfallrate und Unfallkostenrate erzeugt. Grundunfallkostenraten beschreiben das fahrleistungsbezogene Unfallkostenniveau eines Netzelements, welches bei regelkonformem Ausbau der Strecke erreicht werden kann. Da in den Modellen auch Merkmale berücksichtigt sind, die kein Defizit im eigentlichen Sinne darstellen, entspricht die Höhe der UKR ohne jegliche Zuschläge einem Grundniveau. Diesem sind Zuschläge, unterteilt in Defizite und die Streckencharakteristik beschreibende Eigenschaften, zuzuordnen. Anhand der Modelle kann nachgewiesen werden, dass verschiedene Straßenquerschnitte ein unterschiedliches Grundsicherheitsniveau aufweisen. Zwischen Unfallhäufigkeit und DTV besteht ein nichtlinearer Zusammenhang. Die Unfallrate bzw. Unfallkostenrate stellt somit eine vom DTV abhängige Kenngröße dar. In Abhängigkeit des Querschnitts besitzen verschiedene Merkmale einen Einfluss auf die Verkehrssicherheit. Die Größenordnung der Zuschläge kann als Anteil am Grundniveau der UKR beschrieben werden. Die ermittelten Zuschläge wurden ggf. vergleichend betrachtet und im Rahmen einer plausibilisierten Bewertung der Querschnitte angepasst. In Anlehnung an das HVS erfolgt die Darstellung der Berechnung für Grundunfallkostenraten und deren Zuschläge für Landstraßenquerschnitte. Dabei werden zwei verschiedene Ansätze vorgestellt. Die Ergebnisse für Einmündungen mit Vorfahrtregelung durch Verkehrszeichen besitzen empfehlenden Charakter.
Im Jahre 2008 wurde für das deutsche Autobahnnetz eine durchschnittliche tägliche Verkehrsstärke (DTV) von 5.275 ausländischen Kraftfahrzeugen ermittelt. Gemessen am Gesamtverkehr auf BAB in Höhe von durchschnittlich 47.600 Kfz/24h entspricht dies einem Anteil von rd. 11 %, d.h. jedes neunte Kfz auf BAB war 2008 ausländischer Herkunft. Weiterhin wurde für ca. 1.200 km des Bundesstraßennetzes (i.d.R. Grenzübergänge und Europastraßen) ein DTV von 1.585 ausl. Kfz/24 h ermittelt. Hier liegt der Anteil der ausländischen Kfz " bedingt durch den hohen Ausländerverkehr in den grenznahen Gebieten - mit rd. 12 % des Gesamtverkehrs etwas höher. Die Fahrleistung wird vorwiegend auf hochbelasteten Zählabschnitten erbracht. In Tabelle 1 wird die Verteilung der Fahrleistung und Netzlängen nach DTV-Klassen differenziert. Auf Autobahnen konzentriert sich die Hälfte der Fahrleistung ausländischer Kfz auf 22 % des Streckennetzes mit entsprechend hoher Verkehrsbelastung (ab 8.000 Kfz/24h). Zählabschnitte mit DTV-Werten ab 12.000 Kfz/24h konzentrieren sich auf 11 % des BAB-Netzes mit einem Fahrleistungsanteil von 30 %. Die mittlere Verkehrsstärke von 5.275 Kfz/24h wird bei 64 % des BAB-Netzes unterschritten. Für den Bereich der erhobenen Bundesstraßen ist dagegen eine deutliche Konzentration um den Mittelwert festzustellen: Etwa die Hälfte der Netzlaenge hat geringere Verkehrsstärken als 1.585 ausl. Kfz/24 h. Die verschiedenen Verteilungen zwischen den beiden Straßenkategorien wird in Bild 1 noch deutlicher. Auffällig ist, dass der höchste DTV-Wert (25.290 ausl. Kfz/24 h) auf einem Zählabschnitt einer Bundesstrasse erreicht wird (Grenzübergang Kehl nach Strassburg). Dies kennzeichnet die hohe Bedeutung des "kleinen Grenzverkehrs", der insgesamt an allen Grenzen mit den höchsten Ausländeranteilen einhergeht.
Gussasphalt ohne Abstreuung
(2013)
Bedingt durch die wachsende Problematik des Verkehrslärms ist die akustische Optimierung von Asphaltdeckschichten seit über 20 Jahren eine wichtige Aufgabenstellung in der Asphalttechnologie. Nach einem ersten Forschungsschwerpunkt auf offenporige Asphalte wurde anschließend der Fokus auf dichte Deckschichten gerichtet. Eine dieser neueren Konzepte ist die Bauweise Gussasphalt ohne Abstreuung, oder auch als Gussaphalt mit offenporiger Struktur bezeichnet. Als Abkürzung wird derzeit PMA (Porous Mastic Asphalt) verwendet. Die Grundidee dieser Bauweise besteht darin, die untere Zone der Deckschicht möglichst dicht, das heisst ähnlich einem Gussasphalt auszubilden, während sich an der Oberfläche eine offene Textur einstellt, die gemeinsam mit dem kleinen Größtkorn, gute akustische Eigenschaften zeigt. Erreicht wird dies durch eine spezielle Zusammensetzung des Mischguts mit einem großen Anteil grober Gesteinskörnungen, feiner Gesteinskörnungen, die auf 1 Millimeter begrenzt sind und einem abgesenkten Fülleranteil. Diese reduzierte Mörtelmenge führt zur gewünschten definierten Ausfüllung des Korngerüsts. Zur Überprüfung dieser These bieten sich Analysen mit Röntgen-Computertomographie an, die erlauben, die wahre Hohlraumverteilung in Probekörpern zu ermitteln. Die bei der Bundesanstalt für Materialforschung und -prüfung (BAM) in Berlin durchgeführten Messungen zeigen das grundsätzliche Funktionieren der Bauweise. Bei genauer lokaler Betrachtung jedoch können größere Schwankungen detektiert werden, die bis zum Verlassen des Konzeptes führen können. Durchgehende Hohlraumstrukturen bis zur Unterlage sind dabei möglich, die sich auch auf die Oberflächengestalt auswirken. Die bautechnischen Ursachen sind noch nicht näher geklärt. In Frage kommen alle am komplexen Prozess Asphalteinbau beteiligten Parameter, die generell, auch beim herkömmlichen Einbau von Walzasphalt, zu Schwankungen führen. Die Messung der Oberflächeneigenschaften Griffigkeit, Ebenheit und Schallemission ergab ein insgesamt homogenes Verhalten des betrachteten Streckenabschnitts. Die Ermittlung des Schallpegels nach statistischer Vorbeifahrt zeigte für Pkw bei 120 km/h eine Minderung gegenüber dem Referenzpegel von 3 dB(A). Das Optimierungsziel - dichte Asphaltdeckschicht mit guten akustischen Eigenschaften - wurde erreicht. In der Erprobung der noch jungen Bauweise PMA stellt der betrachtete Abschnitt auf der BAB A 4 aufgrund seiner Länge und Verkehrsbelastung einen wichtigen Meilenstein dar, der sich bis zum jetzigen Zeitpunkt insgesamt vielversprechend verhielt. Vor einer Aufnahme als Regelbauweise in die ZTV Asphalt-StB müssen Fragestellungen in den Themenfeldern Laborverfahren, Mischgutkonzeption beziehungsweise Einbauhomogenität und Dauerhaftigkeit beantwortet werden. Für die Themenfelder sind bereits weitergehende Forschungsaktivitäten in Bearbeitung, die bis Anfang 2014 Ergebnisse erwarten lassen. Die Frage der Dauerhaftigkeit wird die Zeit selbst beantworten.
Die Umsetzungspraxis der Verkehrserziehung / Mobilitätsbildung in Kindergärten und Grundschulen wird durch zwei bundesweite Befragungen bei 685 Erzieherinnen bzw. 1.235 Lehrkräften erhoben. Erzieherinnen sind sich ihrer verkehrspädagogischen Verantwortung bewusst und erweisen sich als offen für die entsprechenden Anliegen der Kinder und deren Lebenswelt im räumlichen Umfeld. In Kindergärten dominieren die Sicherheitserziehung sowie die Förderung der Wahrnehmungsfähigkeit und Motorik. Thematisch wird die Kindersicherung im Pkw eher vernachlässigt. Gemeinwesenorientierte Kooperationen sind weit verbreitet. Dabei ist die Zusammenarbeit mit den Verkehrserziehern der Polizei zentral. Die Kooperation mit Grundschulen zeigt deutliche Defizite. Erzieherinnen fühlen sich meist nicht ausreichend auf das Thema "Verkehrserziehung / Mobilitätsbildung" vorbereitet. Die Verkehrserziehung / Mobilitätsbildung an den Grundschulen ist keineswegs randständig. Ihr Stellenwert bei den Lehrkräften ist hoch und die Befassung mit dem Thema wird überwiegend positiv gesehen. Hinsichtlich der verwendeten Methoden und aufgegriffenen Themen liegt der Schwerpunkt in der Sicherheitserziehung sowie in Bewegungsspielen. Die Potenziale der Ganztagsschule werden noch wenig für verkehrspädagogische Inhalte genutzt. Es zeigen sich Informationsdefizite bei den nicht als Obleute etc. tätigen Lehrkräften. Bei Kontaktierung, Materialienbezug und Kooperation stechen die Polizei, die Verkehrswacht und der lokale Verkehrsbetrieb hervor. Die schulinternen wie -externen Unterstützungs- und Beratungsangebote werden gut angenommen. Nur eine Minderheit der Befragten hat eine verkehrspädagogische Lehrveranstaltung besucht, eine entsprechende Zusatzqualifikation erworben oder an einer Fortbildung teilgenommen. Die Lehrkräfte zeigen Interesse an einschlägigen Fortbildungen. Der Bericht enumeriert Handlungsempfehlungen für die Entwicklung der Verkehrserziehung / Mobilitätsbildung im Elementar- und Primarbereich.
Since 2008, the authors inspected fatal traffic accidents on the spot every year, with the cooperation of Toyota police station in Aichi pref. In the jurisdiction, numbers of fatal accidents were 18 in 2008, 12 in 2009, 14 accidents in 2010, and 16 in 2011. We here report the results of our analysis of information obtained by detailed inspection for those that occurred from 2008 to 2010. We focused on vehicle-to-pedestrian accidents, which accounted for about 45% of all accidents in 2008. Because many accidents occurred on residential roads not far from pedestrians" homes, it was revealed that the decrease of the collision speed by traffic calming such as humps and zone speed management, was highly effective. On the other hand, pedestrian detection technologies seemed to be also effective as a countermeasure on vehicle side. Every pedestrian position against a vehicle was clarified and TTC (Time to Collision) was calculated provisionally. Pedestrian accidents in intersections were also examined. Among the intersection pedestrian accidents within the jurisdiction, compared with the national average in Japan, the ratio of intersections without a signal and the ratio without a pedestrian crossing were high. According to the comparison of the Japanese traffic accident patterns between 2001 and 2008, pedestrian accidents during turning right and turning left did not decrease much. For elderly drivers, these accidents occurred very often. Finally, single vehicle accidents were analysed with the accident pattern analysis methods used above. There were high numbers of single vehicle accidents against object on single roads. Although fatal accidents against guardrails decreased, the numbers of fatal accidents against a utility pole and a sign pole were nearly constant. As for the impact with narrow width objects such as utility poles, the fatality rate was very high, and countermeasures of both road infrastructure and vehicles seem to be effective.
Aus einer aktuellen BASt-Studie ("Legalbewährung nach Neuerteilung der Fahrerlaubnis") geht hervor, dass eine Fahrerlaubnisentziehung bei mehrfach verkehrsauffälligen Fahrern nicht unbedingt zur Verhaltensänderung führt: Personen, denen der Führerschein wegen Überschreitens der Punktegrenze entzogen wurde, bergen ein doppelt so hohes Risiko, schuldhaft einen Unfall zu verursachen, wie Personen, deren Fahrerlaubnis wegen Alkohol- oder Drogenkonsums entzogen wurde. Eine Interventionsmaßnahme im Rahmen des Punktsystems stellt ein Hilfsangebot dar, das Fahrerlaubnisinhabern die Möglichkeit gibt, ihr riskantes Fahrverhalten mit professioneller Unterstützung langfristig zu verändern, um zukünftig regelkonform am Straßenverkehr teilzunehmen. Eine Interventionsmaßnahme kann damit einen wichtigen Beitrag zur Reduktion des Unfallrisikos von mehrfach verkehrsauffälligen Fahrern und damit zur Erhöhung der Verkehrssicherheit leisten. Für die bisherigen Aufbauseminare für Punkteauffällige (ASP) konnte kein Wirksamkeitsnachweis erbracht werden. Aus wissenschaftlicher Sicht wurde der den Aufbauseminaren zugrunde liegende Moderationsansatz kritisch hinterfragt. So geht aus einem Gutachten über die Qualität der Aufbauseminare hervor, dass Zweifel bestehen, dass das Ziel der Einstellungsänderung verkehrsauffälliger Fahrer mit dem zugrundeliegenden Ansatz erreicht werden kann. Vor diesem Hintergrund wurde die BASt im Rahmen der Reform des Verkehrszentralregisters vom Bundesministerium für Verkehr, Bau und Stadtentwicklung (BMVBS) im Juni 2012 beauftragt, die Grundlagen für ein wissenschaftlich begründetes Konzept für eine neue, wirksame Interventionsmaßnahme (Fahreignungsseminar, FES) für Punkteauffällige vorzulegen. Die Grundlagen zum Fahreignungsseminar wurden in drei Forschungsprojekten erarbeitet. Diese werden im vorliegenden Bericht dargestellt. Teil 1: Optimierung der Interventionsmaßnahmen im Rahmen der Reform des Mehrfachtäter-Punktsystems. Teil 2: Konzeption einer edukativen Teilmaßnahme der Fahreignungsseminare für verkehrsauffällige Kraftfahrer. Teil 3: Entwicklung eines Rahmenlehrplans für den edukativen Teil des im Rahmen der Reform des Punktsystems geplanten Fahreignungsseminars.
The number of road accidents in Portugal has decreased significantly in the last decades, however, this tendency is not similar in all types of transportation. In the most recent years and by European standards, Portugal is still one of the leading countries concerning the number of fatalities in Powered Two Wheelers (PTW) accidents. To this effect, the in-depth investigation of PTW accidents is crucial and so, a thorough statistical analysis concerning the main factors influencing PTW riders injury severity accidents was undertaken regarding the 2007-2010 period in the National Road Safety Authority (ANSR) injured riders database using the software SPSS. In addition, to determine the importance of absent factors in the database analysis, such as velocity, a set of 53 real accidents involving PTW were also investigated and computationally reconstructed using the software PC-Crash. Lateral collisions between a motorcycle, its rider and the side of three different passenger cars were also simulated, varying the motorcycle impact angle and velocity in order to estimate the PTW deformation energy and the rider- injuries, as this accident configuration stands out in terms of frequency and even severity. The results of this detailed study are presented.
The presentation deals with the simulation tool rateEFFECT which intends to answer the following questions: Which active safety systems should be developed to maximize safety benefit in real traffic accidents? What is the effectiveness of a specific active safety system in the real world? How many casualties could be avoided by such a system? It is shown that a lot of information is required to simulate existing accidents in order to estimate ADAS effects. This particularly includes numerical values for the pre-crash and in-crash phase. The database GIDAS provides a required minimum number of these parameters for a statistically significant sample.
Introduction: The incidence of trauma-related cervical-spine fractures is 19-88 / 100.000. In contrast, the incidence of cervical spine injuries is as high as 19% - 51% of all spinal trauma. Cervical spine injuries in non-polytrauma patients are rare. However, due to the potential damage to the spinal cord these traumata are feared and mustn't be missed. Cervical spine injuries represent the highest reported early mortality rate of all spinal trauma. The rate of functional impairment afterwards is high and the rate of reintegration into work is low compared to other organ systems. In the past, trauma surgeons often did x-rays of the cervical spine with low inhibition threshold and often without strong clinical suggestion for vertebral or discoligamental injuries. This practice was queried by the Canadian C-Spine rule and extensively discussed in the past. Therefore we did a retrospective study whether non-polytrauma patients benefit from cervical spine x-rays.
Accident research 2.0: New methods for representative evaluation of integral safety in traffic
(2013)
BMW has developed a procedure for rating Advanced Driver Assistance Systems (ADAS) benefits that integrates two distinct tools. The tool "S.A.F.E.R." is designed to analyze the pre-crash phase. The aim of S.A.F.E.R. is to simulate all relevant processes in sufficient detail to obtain reproducible estimates of key indicators (effectiveness, false positives, etc.). The relevant processes include not only traffic and vehicle dynamics, but also environmental and most importantly human factors. Representative distributions of factors and parameters are obtained by taking the stochastic variation of all relevant parameters into account in the simulations. The second tool, known as "ICOS", has been designed to provide a high-resolution, high-fidelity description of crash phase dynamics. If one converts the outputs of stochastic simulation into inputs for crash dynamics, the result is a comprehensive description of exactly how a safety system can reduce injuries. Applications currently focus on high-fidelity simulation of individual crashes in order to enhance our understanding and optimization of connected safety systems. An integrated simulation process thus allows an exact prediction of the effectiveness in individual cases in terms of injury severity. The development and rating of integral safety need to reflect the true efficiency in the field. The integrated approach described here could provide a valid and reproducible basis for rating connected systems of active and passive safety. In particular, "virtual experiments" using a traffic-based approach and incorporating models of all relevant processes constitute an essential element of the approach.
Im Rahmen des zweitägigen Kolloquiums "Luftqualität an Straßen 2013" wurden aktuelle Forschungsaktivitäten und Maßnahmen auf dem Gebiet der Luftreinhaltung im Einflussbereich von Straßenbau und Straßenverkehr vorgestellt. Der Tagungsband gibt 14 Fachvorträge und die 4 Beiträge der Posterausstellung wieder.
Nowadays human-created systems are increasing in complexity due to the interaction of humans and technology. Especially road traffic systems are composed of multitudinous resources (e.g. personnel, vehicles, organizations, etc.), which make it even harder to anticipate the positive and negative effects on safety. One key in achieving a significant reduction of fatalities is seen in driver assistant systems counterbalancing the lack of drivers' capabilities. But the actual outcome of implementing these sophisticated technologies especially on influencing driver's capabilities are yet unknown. Latest research exemplifies an increase of reaction times of drivers in case of dysfunctional driver assistant systems. This research paper applies STAMP/STPA (STAMP = systems-theoretic accident model and processes; STPA = systems-theoretic process analysis) to the German automobile traffic system focusing on the effects of driver assistant systems on drivers. By doing so, the potential hazards caused by technology can be identified.
It is very important for Automotive OEMs to get feedback on their product performance on real roads for continuous improvement. Every OEM has a way of collecting this feedback for various performance parameters. Systematic accident research is a way to generate the information related to safety performance of the vehicle. In India, while there is a large amount of data related to the accidents, it is found this data is aimed at understanding the gross statistics and not directly useful for technology development. This paper explains learnings from a pilot study carried out in collaboration with an Emergency Medical Services provider on one of the expressways (motorways). This pilot study has resulted in development of working model that could now be scaled up at for wider application. The paper also presents some of the important observations based on the data collected.
The number of injured car occupants decreases constantly. Nevertheless, they account for nearly 50% of all fatalities and about 44% of all seriously injured persons in German traffic accidents. Further reductions of casualties require multiple efforts in all parts of traffic safety. In this paper a detailed analysis of the important pre-hospital rescue phase was done. The basis for future improvements is the knowledge about injury causation of car occupants in combination with other corresponding influence factors. For that reason more than 1.200 severe (AIS3+) injuries of frontal car occupants were analyzed. For the most relevant injuries of car occupants multivariate analysis models were created to predict the probability of these injuries in a real crash scenario. In addition to the collision severity different influence factors like impact direction, seat belt usage, age of the occupant, and gender were analyzed. Furthermore, the models were checked regarding the goodness of fit and all results all results were checked concerning their robustness. The prediction models were created on the basis of 5.000 car accidents. Afterwards, the models were validated using 4.000 different car accidents. The prediction of the probability of severe injuries could be used for different applications in the field of traffic safety. One possibility is the implementation of the models in a tool for the on-the-spot diagnosis. The background for the development of such applications is the fact, that there are only limited diagnostic possibilities available at the accident scene. Nevertheless, the rescue forces have to make essential decisions like the alerting of the necessary medical experts, appropriate treatment, the type of transportation and the choice of an adequate hospital. These decisions quite often decide between life and death or influence the long-term effects of injured persons. At this point, indications of expectable injuries could help enormously. To enable even persons with limited technical knowledge to use the tool, a procedure was developed that facilitates the assumption of the given crash severity. Another important possibility for the application of the prediction models is the use for the qualification of information sent by e-call systems.
Introduction: Spine injuries pose a considerable risk to life and quality of life. The total number of road deaths in developed countries has markedly decreased, e.g. in Germany from over 20000 in 1970 to less than 4000 in 2010, but little is known how this is reflected in the burden of spine fractures of motor vehicle users. In this study, we aimed to show the actual incidence of spine injuries among drivers and front passengers and elucidate possible dependencies between crash mechanisms and types of injuries.
Beside numerous information about vehicles injuries and environmental data the GIDAS database contains detailed reconstruction data. This data is calculated by a reconstruction engineer who handles about 1000 accidents per year. The spectrum of one reconstruction ranges from simple crossing accidents to complex run-off accidents with rollover events. Especially for complex accident scenarios there is a large effort to design the environment of the accident scene within PC-Crash ®. To reduce the reconstruction time by maintaining the high quality of reconstruction 3D-geodata can be useful. Geodata is available for nearly every area in Germany and can be used for a fast and detailed creation of complex accident environments. In combination with the accident sketch areal images of the accident scene can be created and the participants are implemented in the new-built 3D-reconstruction environment. As a consequence, the characteristics of the terrain can be considered within the reconstruction which is especially important for run-off accidents.
MANSSEN diskutiert das Generalthema des Forschungsseminars, ob sich "das straßenrechtliche Nutzungsregime" tatsächlich im Umbruch befindet und diagnostiziert eine Gewichtsverschiebung vom Straßenrecht hin zum Straßenverkehrsrecht. Das klassische Straßenrecht habe immer weniger zur Weiterentwicklung des Straßenwesens beizutragen. In diesem Zusammenhang behandelt er auch neue Verkehrskonzepte wie "Simply City" und "Shared Space". SIEGELs Beitrag über Grundrechtsgebrauch auf öffentlichen Straßen verdeutlicht anhand aktueller Beispiele die praktische Bedeutung des Straßenrechts bei der Verwirklichung von Grundrechten. Nach seiner Einschätzung verfügt das Straßenrecht insoweit nach wie vor ein adäquates Steuerungspotenzial. Etwaige Lücken könnten durch das Straßenverkehrsrecht, vor allem aber durch eine ergänzende Heranziehung des Polizeirechts geschlossen werden. Der Beitrag von ENDERLE über "Grenzüberschreitende Infrastrukturen " Planungs- und naturschutzrechtliche Besonderheiten" bezieht sein Anschauungsmaterial von dem Projekt der Fehmarnbelt-Querung. Als typische Abstimmungsprobleme bei der Planung und Genehmigung grenzüberschreitender Projekte behandelt sie namentlich die Frage der Linienbestimmung sowie grenzüberschreitende Verträglichkeitsprüfungen für FFH- und Vogelschutzgebiete. Der abschließende Beitrag von DURNER "Das Netzausbaubeschleunigungsgesetz 2011" stellt dar, dass die in diesem Gesetz geschaffene neue "Fachplanung" des Bundes teils Elemente des Raumordnungsverfahrens, teilweise jedoch auch solche der straßenrechtlichen Linienbestimmung und der standortbezogenen Raumordnungsziele aufweist. Letztlich folgt die Bundesfachplanung im Hinblick auf die Bindungswirkung im Wesentlichen dem Modell des -§ 4 ROG. Das Modell des NABEG mag für den Netzausbau sachgerecht sein, erscheint jedoch im sonstigen Infrastrukturbereich unrealistisch.
Rollovers continue to be a major source of heavy truck fatalities when compared to other accident modes. Real world rollover accidents are analyzed and two distinct damage patterns are identified. Damage to heavy truck roofs can occur from lateral loading that transitions to vertical roof loading as the vehicle rolls onto its side and then over onto its roof. A second load path can occur when the vehicle has rolled onto its side and furrows into the ground generating large longitudinal friction forces between the roof and ground. A review of the previous literature and various test methodologies are presented. A sled impact test methodology is presented which allows for structural assessment of a heavy truck cab's crashworthiness in both of these loading environments. Two test series are presented using the sled impact test methodology in order to analyze real world truck rollovers using varying impact platen and contact angles. The structural deformation and failure patterns were found to be consistent with damage seen in real world accident vehicles. In each case, a second equivalent truck cab was then reinforced and tested under similar conditions to evaluate the energy management and crush resistance of a stronger cab structure. These structural reinforcements demonstrated a substantial reduction in roof crush and protected the survival space of the occupant compartment. The sled impact test procedure is an effective method for testing the structural performance of a heavy truck cab in a variety of loading scenarios comparable to real world accidents and ascertaining the load and energy load levels in these accident modes.
Regarding to the German road traffic licensing regulations it is mandatory to have a light system using a bicycle in public traffic. All attached components must be approved. The admission requires additional restrictions such as a dynamo as energy source with a nominal voltage of 6 V. Batteries are only allowed in addition to this. To adopt the German bicycle regulation to the state of art of an energy efficient lighting, additional power sources such as a battery respectively rechargeable batterie should be evaluated. The project will propose amendments for German Road Traffic Regulations and technical requirements.
Supervision of the safety performance in public transport is one of the main tasks of the Federal Office of Transport (FOT) in Switzerland. Recently a three level system of safety indicators has been defined to cover all means of Swiss public transport. The safety indicators are fed by the FOT incident database since the year 2000. In cooperation with the Institute for Traffic Safety and Automation Engineering (iVA) at TU Braunschweig, Germany, FOT is developing a suitable methodology for the definition and evaluation of the safety targets in Swiss public transport. The methodology is applied for evaluation of safety indicators on a country level and for single transport companies. In a new approach the abovementioned methodology is applied to car incident data to develop an indicator based cross-modal safety measure.
A concept for Safe-Driving-Trainings with a focus on risky behavior and safety related attitudes has been evaluated. 519 participants have been tested before and after the training by means of a questionnaire with the topics: technical driving competence, awareness of risks, and propensity for anticipation. A control group (131 subjects) was used to check for the possibility of response artifacts. Three months later, 92 members of the treatment group and 25 members of the control group have been tested again. The results show significant positive changes in driving competence, risk awareness, and safety related attitudes, especially anticipation, due to the training. Compared to the control group the participants have become more risk aware and they regard of risk avoiding behavior as more important. The results show that this concept for Safe-Driving-Trainings has not only short-term but, more importantly, long-term positive effects on the safety-relevant attitudes and cognitions of young drivers.
To date, the Trauma Registry (TraumaRegister DGU-® contains data of approximately 100.000 severely injured patients, 65% of which suffered from a road traffic crash. Thus, it is the world's largest data base for severely injured patients. The article describes the development of the registry and explains how it was rolled out over Germany using the established structure of the German Trauma Network (TraumaNetzwerk DGU-®). In addition, this article presents three typical use cases from the fields of quality management, policy making and system-wide interventions, clinical research and injury prevention. In conclusion, the TraumaRegister DGU-® is a well-established tool for various purposes related to the control and reduction of the burden of road injury. Its ongoing expansion to other countries will support the goal of international benchmarking of hospitals and trauma systems.
Police records about traffic accidents like used by IRTAD (International Road Traffic and Accident Database) and CARE (Community Road Accident Database) do not represent all road injuries. For instance, road accidents of bicyclists without a counterpart are usually not reported. Furthermore, IRTAD-like data contains hardly any information on injury outcome and accident circumstances. This information gap leads to an under-representation of the safety concerns of the most vulnerable road users like children and the elderly both in accident research and safety promotion. Injury registration for the European Injury Database (IDB), in turn, combines details of accident causation with diagnostic information that can be used to assess injury severity and long term consequences. The IDB is collecting data from hospital emergency department patients and is being implemented in a growing number of countries. In this article IDB results on mode of transport and injury outcome are presented from a sample of nine EU member states.
Automotive interiors have long been a potentially injurious impact area to occupants during accidents, especially in the absence of adequate padding. The U.S. Federal Motor Vehicle Safety Standard (FMVSS) 201, Occupant Protection in Interior Impact, outlines test procedures and performance criteria in order to mitigate potentially injurious head impacts to interior surfaces. FMVSS 201 specifies a finite set of impact locations and applies to passenger vehicles of a specified year range and with a gross vehicle weight rating less than 10,000 lb. In this paper, two head impact test methodologies are presented, a pendulum-test device and a Free Motion Headform (FMH) launching device, which allows for dynamic, repeatable impact evaluation of various vehicle interior surfaces and their impact attenuation abilities. The presented testing includes multiple series that evaluate the effect of differing vehicle upper interior padding on occupant head injury. One study in particular, analyzes a head impact to the side header of a heavy truck (not included in FMVSS 201) during a 90 degree rollover. Additionally, two other series of tests are presented which assess the injury reduction effect of side airbags to near side as well as far side occupants in a side impact scenario. Lastly, a forensic analysis is presented which evaluates two possible head impact locations experienced in a real world accident by analysis of the resulting interior compartment damage utilizing the FMH launching device test method. The data collected and presented includes accelerometer instrumentation and high speed video analysis. These studies demonstrate that adequate padding and airbags are very effective at mitigating head injury potential at impact speeds of 12-25 mph (19-40 kph).
The paper aims to study the injury risk and kinematics of pedestrians involved in different passenger vehicle collisions. Furthermore, the difference of pedestrian kinematics in the accidents involved minivan and sedan was analyzed. The 18 sample cases of passenger car to pedestrian collisions were selected from the database of In-depth Investigation of Vehicle Accident in Changsha of China (IVAC),of which the 12 pedestrian accidents involved in a minivan impact for each case, and the 6 accidents in a sedan impact for each. The selected cases were reconstructed by using mathematical models of pedestrians and accident vehicles in a multi-body dynamic code MADYMO environment. The logistic regression models of the risks for pedestrian AIS 3+ injuries and fatalities were developed in terms of vehicle impact speed by analyzing the minivan-pedestrian and sedan-pedestrian accidents. The difference of pedestrian kinematics was identified by comparing the results from reconstructed pedestrian accidents between the minivans and sedans collisions. The result shows that there is a significant correlation among the impact speed and the severity of pedestrian injuries. The minivan poses greater risk to pedestrian than sedan at the same impact speed. The kinematics of pedestrian was greatly influenced by vehicle front shape.
Im Rahmen dieses Projektes wurden vor dem Hintergrund der nationalen und europäischen Entwicklungen (z.B. Europäische Normung etc.) neben den Randbedingungen für die Kraftduktilitätsprüfung auch die Auswertung der dabei erfassten Daten genauer betrachtet sowie praxisrelevante Parameter bzgl. der Versuchsdurchführung und -auswertung ermittelt. Ebenso wurde auch versucht den gesamten Verlauf der Kraftduktilitätskurve sowie ggf. auch die Gestalt der Kurve in die Auswertung mit einzubeziehen und nicht nur, wie bisher, punktuelle Werte bzw. einzelne feste Bereiche. Anhand der in diesem Projekt ermittelten Ergebnisse kann festgehalten werden, dass die Probekörperform mit geradem Steg (Form II) gemäß DIN EN 13589 der Probekörperform mit verjüngtem Steg (Form I) gemäß DIN EN 13398 vorzuziehen ist, da es trotz der höchsten Maximalkräfte bei der Form I bei niedrigen Temperaturen häufig zu einem vorzeitigen Probenriss kam und die die Ausziehlänge wesentlich geringer als bei der Form II (Form mit geradem Steg) war. So das in vielen Fällen eine Ermittlung der Formänderungsarbeit zwischen 200 mm und 400 mm Dehnungsweg gemäß der DIN EN 13703 bei Prüfung mit der Form I nicht möglich war, da die Proben die Ausziehlänge von 400 mm nicht erreichten. Dadurch kann die Form mit verjüngtem Steg (Form I), trotz der Verwendung für die elastische Rückstellung nach DIN EN 13398, nicht für den Einsatz bei der Kraftduktilitätsprüfung empfohlen werden. Hinsichtlich der Ziehgeschwindigkeit sollte die bis-her in der Norm verankerte Ziehgeschwindigkeit von 50 mm/min beibehalten werden, da eine Reduzierung der Geschwindigkeit keine Vorteile, z.B. hinsichtlich der Vermeidung eines vorzeitigen Proberisses bei niedrigen Temperaturen, bringt und die Prüfung mit der reduzierten Ziehgeschwindigkeit von 25 mm/min somit doppelt so lange dauern würde. Bezüglich der Prüftemperatur sollte ein Vorgehen gewählt werden, dass es erlaubt, die Ergebnisse, die bei den verschiedenen Bitumensorten gewonnen werden, zu vergleichen. Dies könnte beispielsweise 10-°C als Prüftemperatur sein. Die Festlegung einer einheitlichen Prüftemperatur und dann entsprechend sortenspezifische Anforderungen an die Formänderungsarbeit würden auch bei unbekannten Bitumen und/oder Kontrollprüfungen die Durchführung der Kraftduktilitätsprüfung sowie die Bestimmung der Bitumensorte erleichtern. Aufgrund der im Rahmen des Projektes ermittelten Ergebnisse sollte für Kraftduktilitätsprüfungen die Probekörperform mit geradem Steg gemäß DIN EN 13589 und eine Ziehgeschwindigkeit von 50 mm/min gewählt werden. Die anderen Randbedingungen (Probekörperform mit verjüngtem Steg und Ziehgeschwindigkeit von 25 mm/min) haben sich hinsichtlich der Durchführbarkeit, Auswertbarkeit und Praktikabilität als nicht geeignet erwiesen. Das Rückgewinnungsverfahren für polymermodifizierte Bitumenemulsionen gemäß dem Entwurf der DIN EN 13074-1 hat sich bei den Untersuchungen im Labor als geeignet hinsichtlich Anwendbarkeit und der Ergebnisse gezeigt. So dass keine Modifikation des Verfahrens notwendig erscheint. Für die genauere Interpretation der Kraftduktilitätskurven sowie ggf. Unterscheidung der einzelnen Sorten ist eine Aufteilung der Kurve in zwei Teilbereiche unumgänglich. Allerdings konnte bisher noch kein Verfahren identifiziert werden, mit dem dies eineindeutig möglich ist. Vor allem weil die in der Praxis auftretende Spannbreite der Ergebnisse bei einer einzelnen Sorte bereits recht groß ist, daher nicht immer auszuschließen ist, dass sich die Randbereiche der einzelnen Sorten nicht überschneiden. Um die einzelnen Sorten anhand der Prüfergebnisse unterscheiden bzw. differenzieren zu können, sind die Prüfungen bei einheitlichen Temperaturen unabhängig von der Bitumensorte notwendig, da sich mit der Änderung der Temperatur auch der Kurvenverlauf und somit die Kennwerte ändern. Das Verfahren zur Aufteilung der Kurven in Teilbereiche sollte frei von subjektiven Einflüssen rein mathematisch erfolgen, nachvollziehbar und einfach im täglichen Laborbetrieb anwendbar sein. Daher wird als relativ einfache Variante die Ermittlung der Steigung des Kurvenverlaufes anhand der 1. Ableitung vorgeschlagen. Unabhängig von der Art des Kurvenverlaufes lässt sich hierbei immer das Maximum der Steigung ermitteln. Anhand dessen kann die Trennung in die beiden Bereiche der Kraftduktilitätskurve einfach und schnell durchgeführt werden. Die weitere Interpretation des Kurvenverlaufes sowie die Zuordnung zu einer Bitumensorte kann anhand des Quotienten der Formänderungsarbeiten der beiden Abschnitte erfolgen.
A biofidelic flexible pedestrian legform impactor (FlexPLI) has been developed from the year 2000 onwards and evaluated by a technical evaluation group (Flex-TEG) of UN-ECE GRSP. A recently established UN-ECE GRSP Informal Group on GTR9 Phase 2 is aiming at introducing the FlexPLI within world-wide regulations on pedestrian safety (Phase 2 of GTR No. 9 as well as the new UN regulation 127 on pedestrian safety) as a test tool for the assessment of lower extremity injuries in lateral vehicle-to-pedestrian accidents. Besides, the FlexPLI has already been introduced within JNCAP and is on the Euro NCAP roadmap for 2014. Despite of the biofidelic properties in the knee and tibia sections, several open issues related to the FlexPLI, like the estimation of the cost benefit, the feasibility of vehicle compliance with the threshold values, the robustness of the impactor and of the test results, the comparability between prototype and production level and the finalization of certification corridors still needed to be solved. Furthermore, discussions with stakeholders about a harmonized lower legform to bumper test area are still going on. This paper describes several studies carried out by the Federal Highway Research Institute (BASt) regarding the benefit due to the introduction of the FlexPLI within legislation for type approval, the robustness of test results, the establishment of new assembly certification corridors and a proposal for a harmonized legform to bumper test area. Furthermore, a report on vehicle tests that previously had been carried out with three prototype legforms and were now being repeated using legforms with serial production status, is given. Finally, the paper gives a status report on the ongoing simulation and testing activities with respect to the development and evaluation of an improved test procedure with upper body mass for assessing pedestrian femur injuries.
The practicability and feasibility of using alcohol ignition interlock devices has been discussed for more than 15 years in Germany. Thereby, judicial issues have been treated conversely. Consensus exists about the fact that the voluntary use of alcohol ignition interlocks is in all areas of possible use recommendable. Great reservation is shown concerning the operation of the devices for DUI (Driving Under Influence) offenders. Main doubts regard the missing legal base for application in such cases and potential circumvention attempts while the need of supportive psychological measures is unquestioned. In 2011, the Ministry of Transport, Building and Urban Affairs entered this topic in its newly released traffic safety programme as a matter of future research. Almost in parallel, the Federal Highway Research Institute (BASt) launched an alcohol ignition interlock project for DUI offenders. The study at hand aimed at developing a comprehensive programme concept for the use of alcohol ignition interlocks as additional measure to psychological rehabilitation for DUI offenders. Expert surveys serve as input for the establishment of a widely accepted innovative concept for nationwide implementation. By means of a pilot trial, the added value of using a combination of structural (alcohol interlock) and individual (psychological measure) intervention for DUI offenders to the existing countermeasure system should be studied. In addition, selection criteria for DUI offenders eligible for future programme participation should be defined. The majority of the experts evaluate the introduction of alcohol ignition interlocks as a good option to enhance traffic safety. The possibility of early psychological rehabilitation is emphasized in the process. Those who do not approve alcohol ignition interlock usage estimate the amount of offenders eligible for such programmes too small. The survey also revealed that legal regulations for issuing an alcohol interlock restricted licence to DUI offenders is missing. Hence, a possible amendment to the German Driving Licencing Regulation was developed within the project. Consultations with the Ministry of Transport, Building and Urban Affairs and the Ministry of Justice disclosed the need for a change of the road traffic law before an amendment to the existing regulations may be put into force. At least, the person responsible in the Ministry of Justice developed a proposal for the law section that needs revision. All in all, it became clear within the process of the project that a field trial in Germany is still a distant vision. Nevertheless, all institutions involved are motivated to deal with the matter further on in order to pave the way for a soon start of the pilot trial.
In Germany, courses for the restoration of the fitness to drive after licence revocation are provided for different offender groups (alcohol, drug and demerit point offenders). Providers of these courses are by law required to prove the effectiveness of the applied course programs. For the evaluation of effectiveness, the Federal Highway Research Institute (BASt) established specific "Reference Values" in 2002. The objective of the study at hand was to collect valid data in order to renew the old-established Reference Values from 2002. Additionally, data collection aimed at initializing Reference Values for drug offender programs. Over 66,000 drivers were analysed regarding their traffic probation in the three years after licence reinstatement. Offenders were assigned to an offender group (alcohol, drugs and demerit point offenders) based on the reason for prior licence revocation. Different indicators were used as criteria for re-offending: new alcohol or drug records, culpable accident involvement and repeated licence revocation. For each of the offender groups, frequency distributions regarding these indicators were calculated. Frequencies of recidivism are highest for the group of demerit point offenders. Compared to the Reference Values of this group from 2002, frequencies of re-offending increased. Conversely, re-offence frequencies of alcohol offenders are halved compared to the data from 2001. The analysis of the re-offence frequencies of drug offenders reveals an equal amount of re-offenders as in the alcohol offender group. The collected data serve as a good base for renewal of the old-established Reference Values and may be applicable as comparative data for future evaluations The results reveal significant differences between recent data and earlier studies. These may occur due to improvements of the applied programmes, but also due to situational changes, e.g. increased enforcement levels and expansion of the catalogue of offenses which lead to demerit points.
The misuse of CRS (child restraint system) is one of the most urgent problems in connection of child safety in cars. Numerous field studies show that more than two thirds of all CRS are used in a wrong way. This misuse could lead to serious injuries for the children. Surprisingly the quality of CRS use is coded much better in accident data (e.g. GIDAS) than the results of observatory field studies show. It is expected that misuse of CRS was not detected by the accident teams in a large number of the cases. An essential part in improving child seats and their usability is the knowledge of the relation between misuse and resulting injuries. For that the analysis and experimental reconstruction of accidents is an important part. For allowing an exact experimental accident reconstruction, it is necessary to have detailed information about the securing situation of the child and about the installation of the CRS in the car.
This paper will outline ETSC's contribution to the European Union's road safety policy 2011-2020. It will present some of the main recommendations from ETSC's Blueprint for the 4th Road Safety Action Programme and will introduce the response to the European Commission's Road Safety Policy Orientations 2011-2020 (published July 2010). The second framework document presented is the Transport White Paper (published March 2011). The paper will focus on new targets and the new vision set for Europe's Road Safety policy picking out some issues in particular such as traffic law enforcement and the protection of vulnerable road users. It will argue that by reinforcing the current Road Safety Policy Orientations, the EU will be better placed to reach its new ambitious goal of halving road deaths by 2020 and the longer term zero casualty vision.
Die Berücksichtigung aller Einflüsse im gesamten Lebenszyklus einer Brücke bildet die Grundlage für Nachhaltigkeitsanalysen. Hierfür müssen Instandhaltungsszenarien auf Basis von Erneuerungszyklen für die einzelnen Bauteilgruppen " das sind Lager, Fahrbahnübergänge, Kappen etc. " definiert werden. Dieser Beitrag leitet drei Strategien für den deutschen Raum her, die für die Nachhaltigkeitsbewertung von Brückenbauwerken angewendet werden können. Die Auswertungen der in Deutschland vorhandenen empirischen Datenbasis bildet hierfür die Grundlage. Zwei Strategien werden abschließend an einer Referenzbrücke als Autobahnüberführung in Integralbauweise zur Anwendung gebracht und mit Hilfe einer Ökobilanzierung, als Teil einer Nachhaltigkeitsanalyse, aus ökologischer Sicht bewertet.
For a number of EU regulatory acts Virtual Testing (VT) is already allowed for type approval (see Commission Regulation No. 371/2010 of 16 April 2010 amending the Framework Directive 2007/46/EC). However, only a very general procedure on how to apply VT for type approval is provided. Technical details for specific regulatory acts are not given yet. The main objective of the European project IMVITER (IMplementation of VIrtual TEsting in Safety Regulations) was to promote the implementation of VT in safety regulations. When proposing VT procedures the new regulation was taken into account, in particular, addressing open issues. Special attention was paid to pedestrian protection as pilot cases. A key aspect for VT implementation is to demonstrate that the employed simulation models are reliable. This paper describes how the Verification and Validation (V&V) method defined by the American Society of Mechanical Engineers was adapted for pedestrian protection VT based assessment. or the certification of headform impactors an extensive study was performed at two laboratories to assess the variability in calibration tests and equivalent results from a set of simulation models. Based on these results a methodology is defined for certification of headform impactor simulation models. A similar study was also performed with one vehicle in the type approval test setup. Its bonnet was highly instrumented and subjected to 45 impacts in five different positions at two laboratories in order to obtain an estimation of the variability in the physical tests. An equivalent study was performed using stochastic simulation with a metamodel fed with observed variability in impact conditions of physical headforms. An estimation of the test method uncertainty was obtained and used in the definition of a validation corridor for simulation models. Validation metric and criteria were defined in cooperation with the ISO TC22 SC10 and SC12 WG4 "Virtual Testing". A complete validation procedure including different test setups, physical magnitudes and evaluation criteria is provided. A detailed procedural flowchart is developed for VT implementation in EC Regulation No 78/2009 based on a so called "Hybrid VT" approach, which combines real hardware based head impact tests and simulations. This detailed flowchart is shown and explained within this paper. Another important point within the virtual testing based procedures is the documentation of relevant information resulting from the verification and validation process of the numerical models used. For this purpose report templates were developed within the project. The proposed procedure fixes minimum V&V requirements for numerical models to be confidently used within the type-approval process. It is not intended to be a thorough guide on how to build such reliable models. Different modeling methodologies are therefore possible, according to particular OEM know-how. These requirements respond to a balance amongst the type-approval stakeholders interests. A cost-benefit analysis, which was also performed within the IMVITER project, supports this approach, showing the conditions in which VT implementation is beneficial. Based on the experience gained in the project and the background of the experts involved an outlook is given as a roadmap of VT implementation, identifying the most important milestones to be reached along the way to a future vehicle type approval procedure supported by VT. The results presented in this paper show an important step addressing open questions and fostering the future acceptance of virtual testing in pedestrian protection type approval procedures.
A series of drop tests and vehicle tests with the adult head impactor according to Regulation (EC) 631/2009 and drop tests with the phantom head impactor according to UN Regulation No. 43 have been carried out by the German Federal Highway Research Institute (BASt) on behalf of the German Federal Ministry of Transport, Building and Urban Development (BMVBS). Aim of the test series was to study the injury risk for vulnerable road users, especially pedestrians, in case of being impacted by a motor vehicle in a way described within the European Regulations (EC) 78/2009 and (EC) 631/2009. Furthermore, the applicability of the phantom head drop test described in UN Regulation No. 43 for plastic glazing should be investigated. In total, 30 drop tests, thereof 18 with the adult head impactor and 12 with the phantom head impactor, and 49 vehicle tests with the adult head impactor were carried out on panes of laminated safety glass (VSG), polycarbonate (PC) and laminated polycarbonate (L-PC). The influence of parameters such as the particular material properties, test point locations, fixations, ambient conditions (temperature and impact angle) was investigated in detail. In general, higher values of the Head Injury Criterion (HIC) were observed in tests on polycarbonate glazing. As the HIC is the current criterion for the assessment of head injury risk, polycarbonate glazing has to be seen as more injurious in terms of vulnerable road user protection. In addition, the significantly higher rebound of the head observed in tests with polycarbonate glazing is suspected to lead to higher neck loads and may also cause higher injury risks in secondary impacts of vulnerable road users. However, as in all tests with PC glazing no damage of the panes was observed, the risk of skin cut injuries may be expected to be reduced significantly. The performed test series give no indication for the test procedure prescribed in UN Regulation No. 43 as a methodology to approve glass windscreen not being feasible for polycarbonate glazing, as all PC panes tested fulfilled the UN R 43 requirements. The performance of the windscreen area will not be relevant for vehicle type approval according to the upcoming UN Regulation for pedestrian protection. However, it is recommended that pedestrian protection being considered for plastic windscreens to ensure at least the same level of protection as glass windscreens.
Recent accident statistics from the German national database state bicyclists being the second endangered group of vulnerable road users besides pedestrians. With 399 fatalities, more than 14.000 seriously injured and more than 61.000 slightly injured persons on german roads in the year 2011, the group of bicyclists is ranked second of all road user groups (Statistisches Bundesamt, 2012). While the overall bicycle helmet usage frequency in Germany is very low, evidence is given that its usage leads to a significant reduction of severe head injuries. After an estimation of the benefit of bicycle helmet usage as well as an appropriate test procedure for bicyclists, this paper describes two different approaches for the improvement of bicyclist safety. While the first one is focusing on the assessment of the vehicle based protection potential for bicyclists, the second one is concentrating on the safety assessment of bicycle helmets. Within the first part of the study the possible revision of the existing pedestrian testing protocols is being examined, using in depth accident data, full scale simulation and hardware testing. Within the second part of the study, the results of tests according to supplemental test procedures for the safety assessment of bicycle helmets developed by the German Federal Highway Research Institute (BASt) are presented. An additional full scale test performed at reduced impact speed proves that measures of active vehicle safety as e.g. braking before the collision event do not necessarily always lead to a reduction of injury severity.
Various kinds of demerit point systems have been developed and implemented in European countries, aimed at tackling repeat offences in road transport by acting as a deterrent and providing sanctioning. The impact of a demerit point system on the number of crashes is often reported to be significant, but temporary. The objective of the EU BestPoint project was to establish a set of recommended practices that would result in a more effective and sustainable contribution of demerit point systems to road safety. A high actual chance of losing the licence and a high perceived chance of losing the licence are basic prerequisites for the effective operation of demerit point systems. For measures applied within the context of a demerit point system, a four-step-approach is recommended: warning letter, driver improvement course, licence withdrawal, rehabilitation course. Further recommendations concern issues like points and offences, e.g. which offences should lead to points, target groups, and the administration of demerit point systems. The final result of the EU BestPoint project is a handbook (van Schagen & Machata, 2012) which provides a concise overview of all recommended practices. The presentation/paper outlines how sustainable safety improvements can be achieved if national demerit point systems are implemented and maintained according to the recommended practices. In addition, potential further steps towards an EU-wide demerit point system (cross-border exchange on points and/or offences) are presented.