Filtern
Erscheinungsjahr
Dokumenttyp
- Buch (Monographie) (252)
- Konferenzveröffentlichung (123)
- Wissenschaftlicher Artikel (111)
- Arbeitspapier (13)
- Teil eines Buches (Kapitel) (9)
- Bericht (5)
- Sonstiges (1)
Schlagworte
- Safety (514) (entfernen)
Institut
- Sonstige (243)
- Abteilung Verhalten und Sicherheit im Verkehr (115)
- Abteilung Fahrzeugtechnik (89)
- Abteilung Straßenverkehrstechnik (79)
- Abteilung Brücken- und Ingenieurbau (22)
- Stabstelle Presse und Öffentlichkeitsarbeit (12)
- Präsident (6)
- Abteilung Straßenbautechnik (5)
- Stabstelle Forschungscontrolling, Qualitätsmanagement (2)
Die Verkehrssicherheit ist auf Autobahnen bei Niederschlägen, insbesondere in wasserabflussschwachen Bereichen, beeinträchtigt. Zur Überprüfung der Entwässerungsbereiche wurde im Rahmen eines Forschungsprojekts ein Simulationsmodell (PLANUS) entwickelt, mit welchem es möglich ist, aus Fahrbahn- und Trassierungsdaten sowie der Regenintensität die Wasserfilmdickenverteilungen sowie die Aquaplaninggeschwindigkeiten zu errechnen. In der Untersuchung wurden die berechneten Aquaplaninggeschwindigkeiten mit den tatsächlich gefahrenen Geschwindigkeiten auf den Autobahnen verglichen. Für 9 Messstellen wurden hierzu Analysen der Pkw-Geschwindigkeiten im freien Verkehrsfluss auf dem linken Fahrstreifen bei verschiedenen Niederschlagsintensitäten durchgeführt. Es zeigte sich, dass an 3 der 9 untersuchten Stellen die tatsächlich gefahrenen Geschwindigkeiten oberhalb der kritischen Geschwindigkeit lagen, ab der ein Aufschwimmen der Reifen auf dem Wasserfilm möglich ist. Derartige Bereiche sind auf Autobahnen vor allem dort anzutreffen, wo Querneigungswechsel in Verbindung mit großer Fahrbahnbreite und geringer Längsneigung vorkommen, das heißt, Strecken auf denen das Wasser schlecht ablaufen kann oder einen langen Weg zurücklegt. Mithilfe der Software PLANUS kann das Erfordernis von entwurfstechnischen, straßenbaulichen und verkehrstechnischen Maßnahmen zur Minderung des Unfallrisikos beurteilt werden. Ziel muss es sein, die Unfallgefahren an Abschnitten mit Aquaplaninggefahr zu reduzieren.
In einem Kurzabriss wird über ein Forschungsvorhaben berichtet, das zum Ziel hat, geeignete Maßnahmen zur Heizung von Straßenbrücken zwecks Glättevermeidung im Winter zu entwickeln. Das Projekt wird durch die Bundesanstalt für Straßenwesen betreut und durch die RWTH Aachen und die Universität der Bundeswehr München bearbeitet. Es ist bekannt, dass Brückenfahrbahntafeln eher vereisen als die angrenzende Strecke und damit ein erhöhtes Sicherheitsrisiko für den Verkehrsteilnehmer bilden. Bisher wird diesem Gefahrenpotenzial durch ein Frühwarnsystem mit vorsorglichem Streudienst oder in einigen besonders gefährdeten Bereichen durch Taumittelsprühanlagen begegnet. Die Salzstreuung bringt jedoch Nachteile für die Dauerhaftigkeit der Brücken und für die Umwelt mit sich. Eine intelligente Beheizung der Fahrbahntafeln mit Nutzung der Geothermie bildet eine umweltschonende Variante zur Vermeidung von Glättebildungen auf Brücken. Wird die Geothermie auch im Sommer betrieben, so könnte die Fahrbahnplatte gekühlt und damit der Bildung von Spurrinnen entgegengewirkt werden. In europäischen Nachbarländern gibt es bereits ausgeführte Pilotprojekte der Brückenheizung, bei denen jedoch eine vollständige Freihaltung von Eis vorgenommen wird. Bei dem vorgestellten Forschungsvorhaben soll hingegen das Vereisungsverhalten auf der Brücke dem der Strecke angepasst werden. Dies erfolgt mittels einer neu entwickelten Mess-, Steuerungs- und Regelungsanlage, die die meteorologischen und bauwerksspezifischen Randbedingungen berücksichtigt und gleichzeitig den Energieaufwand minimiert. Nach durchgeführten Laboruntersuchungen wurde das System auf einem Freigelände mit gutem Erfolg getestet. Im nächsten Schritt wird im Rahmen der Erneuerung einer Straßenbrücke im Zuge der B 208 über den Elbe-Lübeck-Kanal ein Pilotprojekt durchgeführt.
Das Merkblatt zur Verbesserung der Verkehrssicherheit auf Motorradstrecken (MVMot (FGSV, 2007)) gibt bereits Hilfen zur Bestimmung unfallauffälliger Bereiche von Motorrädern auf Landstraßen. Bisher existiert aber kein Merkblatt, welches den Bereich innerhalb geschlossener Ortschaften abdeckt, obwohl etwa 2/3 der Unfälle mit Personenschaden unter Beteiligung motorisierter Zweiradfahrer (MZR) innerorts stattfinden (DESTATIS, 2012). Mit Hilfe theoretischer Ansätze werden geeignete Grenzwerte entwickelt, um unfallauffällige Bereiche (UAB) für MZR im Innerortsbereich zu erkennen und abzugrenzen. Neben der Bestimmung eines Grenzwerts über die absolute Anzahl an Unfällen unter Beteiligung von MZR wurde auch der Ansatz über den Relativanteil an allen Unfällen in einer Unfallhäufungsstelle (UHS nach M-Uko (FGSV, 2012)) gewählt. Die theoretischen Überlegungen zur Grenzwertbestimmung basieren auf einer Optimierung des Aufwands an zu bearbeitenden UAB im Hinblick auf den Nutzen, bestehend aus den dadurch bearbeiteten Unfällen. Aus typischen Unfallkonstellationen und Defiziten in den bestimmten UAB wurden typische Unfallkonstellationen abgeleitet. Spezielle Defizite einer Unfallkonstellation ergaben sich aus der Analyse der Örtlichkeit und der Unfalltexte. Den Defiziten wurden geeignete Maßnahmen gegenübergestellt und in einem Maßnahmenkatalog zusammengefasst. Unter Verwendung multivariater statistischer Modelle wurden Wirkungen einzelner (stetiger) Größen auf das Unfallgeschehen bzw. die Beschreibung systematischer Auswirkungen einzelner (kategorialer) Merkmale beschrieben. Es wurden sowohl Streckenmodelle als auch Knotenpunktmodelle des Hauptstraßennetzes entwickelt, die sich in ihrer Vorfahrtsregelung und Knotenpunktform unterscheiden. Es wurden nur für Elemente des Straßennetzes mit Angaben zur Verkehrsstärke Modelle erstellt. Modelle für Knotenpunkte, an denen die Verkehrsbelastung bekannt ist, konnten zwischen 60-70 % der systematischen Varianz der Unfallhäufigkeit beschreiben. Der Großteil ist allein auf den Einfluss der Verkehrsstärken auf der Haupt- und Nebenrichtung zurückzuführen. Weitere Unterschiede in der Unfallhäufigkeit werden durch den systematischen Einfluss von Straßenbahngleisen, Fußgängerquerungen in Geschäftsstraßen (Anzahl der Dienstleistungen im Umfeld als Stellvertretervariable) und den Zustand der Fahrbahnoberfläche (Anzahl der Haltstellen im Umfeld als Stellvertretergröße für Spurrillen) erklärt. An Strecken ergeben sich die Unterschiede der Unfallhäufigkeit zusätzlich aus variierenden Streckenlängen. Die Untersuchung der UAB zeigte folgende häufig auftretende Defizite: - spitzwinklige Befahrung von Straßenbahngleisen, - fehlende Sicht, - Spurrillen, - Kreisverkehrszufahrten am Ortseingang nach Innerortsstandard, - schlecht erkennbare Wartepflicht, - Griffigkeitswechsel (Bitumenvergüsse, großflächige Bodenmarkierungen), - hohe Geschwindigkeiten, - plötzliche Bremsvorgänge. Für häufig vorkommende Unfallkonstellationen können anhand des Maßnahmenkatalogs auf typische sicherheitsrelevante Defizite innerorts hingewiesen werden und situationsgerechte und wirkungsvolle Maßnahmen vorgeschlagen werden.
To assess occupant safety in a crash test, criteria associating the measurements made with a crash test dummy to injury risk are necessary. To enable better protection of elderly car occupants the objective of this study was to develop improved thoracic injury criteria for the THOR average male dummy. The development of these criteria is usually based on matched dummy and Post Mortem Human Surrogate (PMHS) tests by relating the obtained PMHS injuries to dummy measurements. This approach is limited, since only a few tests in relevant loading conditions are available and any new test series requires high efforts to be performed due to their complexity and costs. To overcome these limitations and to extend the dataset for the development of THOR dummy chest injury risk functions a simulation-based approach was applied within the EC funded project SENIORS (Safety Enhanced Innovations For older Road Users - www.seniors-project.eu). Within this study frontal impact sled simulations with an FE model representing a THOR average male dummy and matched simulations with a human body model (HBM) representing an elderly car occupant were carried out. The HBM used for this study was the THUMS TUC with modified rib cage, which was developed in SENIORS. The modifications included material and geometry changes aiming to represent an elderly car occupant. The rib fracture risk was predicted with a deterministic approach whereby a rib was considered broken when the strain exceeded an age-dependent threshold. Furthermore, a probabilistic method was applied to predict the probability of sustaining a certain number of fractured ribs by comparing local strain values to the distribution of cortical rib ultimate strain. By relating the output from the HBM simulations to a multi-point dummy injury criterion, injury risk curves were calculated by statistical methods. The wide range of loading conditions resulted in the desired range of injuries and THOR ATD output. The number of fractured ribs predicted by the HBM based on the deterministic prediction method was between 0 and 15. Furthermore, the probabilistic risk for the number of rib fractures equal or greater than two, three or four was calculated for each load case. The THOR rib deflection criterion Rmax was between 18 and 56 mm, while the PC Score was in the range of 2.5 to 7.2. Based on these outputs new risk curves for the predicted deterministic (AIS2+/3+) and probabilistic injury risk were calculated. The new curves show reasonable shapes and significance that provide trust in their application. The new risk curves are compared to risk curves obtained by traditional methods. The results were found similar to previous injury risk functions based on physical tests, which gives a high level of confidence in the chosen approach. The simulation-based approach of matched ATD model vs. HBM simulation was successfully applied. Rmax curves show a slightly better quality than the injury criterion PC Score.
Since the beginning of the testing activities related to passive pedestrian safety, the width of the test area being assessed regarding its protection level for the lower extremities of vulnerable road users has been determined by geometrical measurements at the outer contour of the vehicle. During the past years, the trend of a decreased width of the lower extremity test and assessment area realized by special features of the outer vehicle frontend design could be observed. This study discusses different possibilities for counteracting this development and thus finding a robust definition for this area including all structures with high injury risk for the lower extremities of vulnerable road users in the event of a collision with a motor vehicle. While Euro NCAP is addressing the described problem by defining a test area under consideration of the stiff structures underneath the bumper fascia, a detailed study was carried out on behalf of the European Commission, aiming at a robust, worldwide harmonized definition of the bumper test area for legislation, taking into account the specific requirements of different certification procedures of the contracting parties of the UN/ECE agreements from 1958 and 1998. This paper details the work undertaken by BASt, also serving as a contribution to the TF-BTA of the UN/ECE GRSP, towards a harmonized test area in order to better protect the lower extremities of vulnerable road users. The German In-Depth Accident Database GIDAS is studied with respect to the potential benefit of a revised test area. Several practical options are discussed and applied to actual vehicles, investigating the differences and possible effects. Tests are carried out and the results studied in detail. Finally, a proposal for a feasible definition is given and a suggestion is made for solving possible open issues at angled surfaces due to rotation of the impactor. The study shows that, in principle, there is a need for the entire vehicle width being assessed with regard to the protection potential for lower extremities of vulnerable road users. It gives evidence on the necessity for a robust definition of the lower extremity test area including stiff and thus injurious structures at the vehicle frontend, especially underneath the bumper fascia. The legal definition of the lower extremity test area will shortly be almost harmonized with the robust Euro NCAP requirements, as already endorsed by GRSP, taking into account injurious structures and thus contributing to the enhanced protection of vulnerable road users. After finalization of the development of a torso mass for the flexible pedestrian legform impactor (FlexPLI) it is recommended to consider again the additional benefit of assessing the entire vehicle width.
Despite the steadily declining number of pedestrian fatalities and injuries in most European countries during recent decades, pedestrian protection is still of great importance in the European Union as well as in Germany. This is because they still constitute a large proportion of road user casualties and are more likely to suffer serious and fatal injuries than most other road users. In 1999 only car occupants suffered more fatal injuries than pedestrians in Germany. In December 1998, EEVC WG 17 completed their review and updating of the EEVC WG 10 pedestrian test procedure that made it possible to evaluate the protection afforded to pedestrians by the front of passenger cars in an accident. Within the scope of this procedure, four different impactors are used representing those parts of the body which are injured very often and/or very seriously in vehicle-pedestrian-collisions. In a project executed by IKA and BASt, a small family car was tested according to the EEVC WG 17 test procedure. Afterwards modifications to the car were carried out in order to improve the pedestrian protection provided by the vehicle design. There were certain restrictions placed on the level of modifications undertaken, e.g. only minor modifications to vehicle styling and to the vehicle structures, which provide passenger protection. The redesigned vehicle was tested again using the WG 17 test procedure. The test results of the modified vehicle were compared with those of the standard vehicle and evaluated. The results show that considered measures for pedestrian protection in many areas of the vehicle front structure and the use of innovative techniques can lead to a significant reduction of the loads of pedestrians at an acceptable expense.
Unfortunately, there has been a high number of accident fatalities reported in the Czech Republic in recent years. There are many causes which have led to a growth in the number of road traffic accidents. Since 1990, traffic density has demonstrated an upward moving tendency, daily traffic-jams are on the increase in many cities and traffic capacity on roads and streets is not able to satisfy this increasing density. Moreover, many road users lack experience in terms of driving modern cars. The National Accident Study of the Czech Republic is based on the assumption that the year 2010 is considered as a pilot project with the testing operation of collecting and evaluating data from traffic accidents. From the beginning of 2011, a fully-functional structure of the Traffic Accident Research will be created and solid data generated. Based on this assumption, we hope to begin meaningful cooperation with foreign countries.
This paper gives an overview of the in-depth crash investigation activity conducted by the Centre for Automotive Safety Research (CASR) at the University of Adelaide, in South Australia. Recent changes in method include: an expansion in on-call hours for the crash investigation team, providing the option of a phone interview for crash participants to discuss the crash, and downloading objective crash data from vehicle airbag control modules. These changes have resulted in: increased representativeness of crashes by hour of day; a decrease in the over-representation of fatal crashes in our sample; an increase in the proportion of crashes that involved a pedestrian, bicycle or scooter (moped); an increase in the proportion of crash participants consenting to an interview; and an increase in the objective data available, through airbag control module downloads. Our in-depth crash investigations enabled research into road departures that found barriers were a more feasible solution than clear zones for eliminating serious and fatal injury resulting from run off road crashes.
The objective of this deliverable is to describe the expected influence of the candidate test procedures developed in FIMCAR for frontal impact on other impact types. The other impact types of primary interest are front-to-side impacts, collisions with road restraint systems (e.g. guardrails), and heavy goods vehicle impacts. These collision types were chosen as they involve structures that can be adapted to improve safety. Collisions with vulnerable road users (VRU) were not explicitly investigated in FIMCAR. It is expected that the vehicle structures of interest in FIMCAR can be designed into a VRU friendly shell. Information used for this deliverable comes from simulations and car-to-car crash tests conducted in FIMCAR or review of previous research. Three test configurations (full width, offset, and moving deformable barriers) were the input to the FIMCAR selection process. There are three different types of offset tests and two different full width tests. During the project test procedures could be divided into three groups that provide different influences or outcomes on vehicle designs: 1. The ODB barrier provides a method to assess part of the vehicles energy absorption capabilities and compartment test in one test. 2. The FWRB and FWDB have similar capabilities to control structural alignment, further assess energy absorption capabilities, and promote the improvements in the occupant restraint system for high deceleration impacts. 3. The PDB and MPDB can be used to promote better load spreading in the vehicle structures, in addition to assessing energy absorption and occupant compartment strength in an offset configuration. The consortium selected the ODB and FWDB as the two best candidates for short term application in international rulemaking. The review of how all candidates would affect vehicle performance in other impacts (beside front-to-front vehicle or frontal impacts with fixed obstacles) however is reported in this deliverable to support the benefit analysis reported in FIMCAR. The grouping presented above is used to discuss all five test candidates using similarities between certain tests and thereby simplify the discussion.