Sonstige
Filtern
Erscheinungsjahr
Dokumenttyp
- Konferenzveröffentlichung (150)
- Buch (Monographie) (69)
- Wissenschaftlicher Artikel (8)
- Bericht (1)
- Arbeitspapier (1)
Schlagworte
- Unfall (229) (entfernen)
Institut
- Sonstige (229) (entfernen)
While accident statistics on a national level are provided by many countries, there is a need for international data that includes more detailed information about the accident, so called in-depth data. As a consequence, accident data projects have been emerging in different regions of the world. This creates a need for comparable and mergeable data from different countries, enabling the use of already existing accident data resources and helping to expedite the improvement of global road safety. While existing approaches focus that mostly on building a comprehensive accident database from scratch, the iGLAD project (Initiative for the Global Harmonization of Accident Data) attempts a more pragmatic approach by building on top of the work already accomplished in this area and complementing it. The target of iGLAD is to help setting up an additional dataset as a compatibility layer between already existing world wide data sets and integrating the structure of these by defining a common data scheme. This dataset is limited to the common denominator between the existing data sets and is inherently rather small and simple. Eventually, an individual converter for each participating accident investigation group will be built that enables pooling all data sets in a common repository. This not only saves costs and time, and hence makes such a target more feasible, but also creates data that is usable right from the start. This paper gives an overview of the current status of iGLAD and first steps taken. Additionally, some methodological aspects are discussed, next to a glance at other projects working currently on related issues, providing additional input for iGLAD. Finally, an overview of next steps and intended future work is given.
Car occupants have a high level of mortality in road accidents, since passenger cars are the prevalent mode of transport. In 2013, car occupant fatalities accounted for 45% of all road accident fatalities in the EU. The objective of this research is the analysis of basic road safety parameters related to car occupants in the European countries over a period of 10 years (2004-2013), through the exploitation of the EU CARE database with disaggregate data on road accidents. Data from the EU Injury Database for the period 2005 - 2008 are used to identify injury patterns, and additional insight into accident causation for car occupants is offered through the use of in-depth accident data from the EC SafetyNet project Accident Causation System (SNACS). The results of the analysis allow for a better understanding of the car occupants' safety situation in Europe, thus providing useful support to decision makers working for the improvement of road safety level in Europe.
Ziel der beschriebenen Untersuchung ist die Ergründung streckencharakteristischer Merkmale bei lokalen Häufungen überwiegend fahrdynamisch begründeter Unfälle auf einbahnigen Außerortsstraßen sowie die Erarbeitung geeigneter Abhilfemaßnahmen. Es wurden Streckenabschnitte mit Unfallhäufungsstellen in Rheinland-Pfalz, Hessen, Saarland und Baden-Württemberg ausgewählt. Auf 58 Untersuchungsstrecken wurde das Geschwindigkeitsverhalten und die streckencharakteristische Geschwindigkeit durch Geschwindigkeitsprofile mit Hilfe von Messfahrten untersucht. Die Streckencharakteristika wurden nach quantifizierbaren Merkmalen wie Kurvigkeit und Krümmungsradien sowie nach subjektiven Beurteilungskriterien aufgeschlüsselt. Unfallhäufungsbereiche wurden durch Beschreibungsmerkmale gekennzeichnet, die den kombinierten Einfluss der Trassierungselemente, der Ausstattung und des Umfeldes erfassten. Die Versuche, quantitative Zusammenhänge zwischen Unfallkennzahlen und einzelnen streckencharakteristischen Merkmalen herzustellen, misslangen. Als weitaus häufigstes Merkmal innerhalb der Unfallhäufungsbereiche zeigte sich eine lokale Steigerung der Kurvigkeit in einer bereits kurvigen Umgebung. An zweiter Stelle der Häufigkeit steht die Mitwirkung von Querneigungs- und Fahrbahndeckenmängeln. Die Autoren stellen fest, dass die heutigen Richtlinien zur Linienführung von Straßen (RAS-L-1) keine ausreichenden Kriterien enthalten, um die häufigste festgestellte Unfallursache zu vermeiden, die darin zu sehen ist, dass innerhalb kurviger Strecken Einzelkurven mit größerer Richtungsänderung und/oder etwas kleinem Krümmungsradius auftreten. Hieraus wird die Notwendigkeit einer entsprechenden Überarbeitung der Richtlinie abgeleitet.
Im Zentrum steht die Frage, wie lückenlos und in welchem Umfang ein ganzes Großstadtgebiet von dem NAW-Dienst versorgt wird, der den Anspruch erhebt, flächendeckend zu arbeiten. Untersucht wird, wie dieser Dienst den spezifischen gebiets- und bevölkerungsstrukturellen Unterschieden Rechnung trägt. Ferner wird gefragt, inwieweit die Einsatz- und Interventionsstrategien des NAW-Dienstes nicht so angelegt sind, dass sie Versorgungsungleichheiten produzieren und/oder verstärken. Dokumentiert und ausgewertet wurden 15.716 Einsätze, die der mit 5 Notarztwagen ausgestattete NAW-Dienst in Berlin-West innerhalb eines zwölfmonatigen Zeitraums durchgeführt hat. Zusätzlich wurden Daten des ökologischen Kontexts einbezogen, ferner Feuerwehrdaten (technische Einsatzdaten) und klinische Beurteilungen der NAW-Patienten, die in Krankenhäuser eingewiesen wurden. Die Ergebnisse zeigen zeitliche und regionale Differenzen der Einsätze, das Einsatzspektrum des ganzen NAW-Dienstes wie auch der einzelnen Fahrzeuge und die Phasen des Einsatzes. Weite Teile des Berichts verdeutlichen, wie sich differente Interventionsstrategien einzelner Stützpunkte auswirken. Untersucht wird die Wirksamkeit des NAW-Dienstes in Begriffen der Indikationsverifizierung, der Überlebenschancen und der prospektiven Versorgungsaufwendungen für NAW-Patienten nach der klinischen Behandlung.
Die Zielsetzung der Arbeit bestand darin, Erkenntnisse über das "Dunkelfeld" beziehungsweise die "Unfalldunkelziffer" der amtlichen Straßenverkehrsunfallstatistik in Deutschland zu gewinnen. Dazu wurde eine Datenerhebung in einem begrenzten Gebiet durchgeführt. Die Untersuchung sollte Hinweise ermöglichen über die Größe der Unfalldunkelziffer in Abhängigkeit von bestimmten Unfallmerkmalen sowie über die Struktur des Dunkelfeldes im Vergleich zur amtlichen Statistik. Als unterer Grenzwert für die Unfalldunkelziffer in der Pilotstudie wird ein Wert von 44 % angesehen. Die Untersuchung zeigt eine deutliche Abhängigkeit der Dunkelziffer von der Unfallschwere. Die Dunkelziffer liegt geringer bei Unfällen mit "ungeschützten" Unfallobjekten (Unfälle mit Fußgängern und Zweiradfahrern). Der Erfassungsgrad für Nachtunfälle ist größer als für Tagunfälle. Die Untersuchungsergebnisse zeigen insgesamt, dass die Struktur der amtlichen Statistik deutlich von der Struktur des Dunkelfeldes abweicht. Es wird die begründete Annahme ausgesprochen, dass die amtliche Verkehrsunfallstatistik unvollständig ist, wobei der Erfassungsgrad nicht einheitlich ist, sondern von verschiedenen Merkmalen (Unfallschwere, Unfallart, etc.) abhängt.
The overall purpose of the ASSESS project is to develop a relevant and standardised set of test and assessment methods and associated tools for integrated vehicle safety systems, primarily focussing on currently available pre-crash sensing systems. The first stage of the project was to define casualty relevant accident scenarios so that the test scenarios will be developed based on accident scenarios which currently result in the greatest injury outcome, measured by a combination of casualty severity and casualty frequency. The first analysis stage was completed using data from a range of accident databases, including those which were nationally representative (STATS19, UK and STRADA, SE) and in-depth sources which provided more detailed parameters to characterise the accident scenarios (GIDAS, DE and OTS, UK). A common analysis method was developed in order to compare the data from these different sources, and while the data sets were not completely compatible, the majority of the data was aligned in such a way that allowed a useful comparison to be made. As the ASSESS project focuses on pre-crash sensing systems fitted to passenger cars, the data selected for the analysis was "injury accidents which involved at least one passenger car". The accident data analysis yielded the following ranked list of most relevant accident scenarios: Rank Accident scenario 1 Driving accident - single vehicle loss of control 2 Accidents in longitudinal traffic (same and opposite directions) 3 Accidents with turning vehicle(s) or crossing paths in junctions 4 Accidents involving pedestrians The ranked list highlights the relatively large role played by "accidents in longitudinal traffic", and "accidents with turning vehicle(s) or crossing paths in junctions" (the second and third most prevalent accident scenarios, respectively). The pre-crash systems addressed in ASSESS propose to yield beneficial safety outcomes with specific regard to these accident scenarios. This indicates that the ASSESS project is highly relevant to the current casualty crash problem. In the second stage of the analysis a selection of these accident scenarios were analysed further to define the accident parameters at a more detailed level .This paper describes the analysis approach and results from the first analysis stage.
There is a need for detecting characteristics of pedestrian movement before car-pedestrian collisions to trigger a fully reversible pedestrian protection system. For this purpose, a pedestrian sensor system has been developed. In order to evaluate the effectiveness of the sensor system, the in-depth knowledge of car-pedestrian impact scenarios is needed. This study aims at the evaluation of the sensor system. The accident data are selected from the STRADA database. The accident scenarios available in this database were evaluated and the knowledge of the most common scenarios was developed in terms of the pedestrian trajectory, the pedestrian speed, the car trajectory, the car velocity, etc. A mathematical model was then established to evaluate the sensor system with different detective angles. It was found that in order to detect all the pedestrians in the most common scenarios on time the sensor detective angle must be kept larger than 60 degrees.
Accidents with vulnerable road users require special attention within the road safety work because these accidents are often accompanied with severe injuries. Thus In 2006 at least 6200 Powered Two Wheeler (PTW) riders were killed in road crashes in the EU 25 representing 16% of the total number of road deaths while accounting for only 2% of the total kilometers driven. For the prevention of accidents with VRU above all the knowledge of the causes of the accidents is of special importance. This study is based on the methodology of the German In-Depth Accident Study GIDAS. Within GIDAS extensive data on various fields of accidentology are collected on-scene from road traffic accidents with injuries in the Hannover and Dresden area. Using a well defined sample plan the collected data is highly representative to the whole German situation (Brühning et al, Otte et al). The need of in-depth accident causation data in accident research led to the development of a special tool for the collection of such data called ACASS (Accident Causation Analysis with Seven Steps), which was implemented in the GIDAS methodology in 2008 and described by Otte in 2009.
The proportion of older road users is increasing because of demographic change (in the group 65+ from current 18% to about 24% by 2030). The mobility needs of people 65+ often differ from those of younger people. Seniors (65+) are already more involved in fatal accidents than younger road users. According to the age development, the senior share of road deaths in the EU of today is increasing nearly one-fifth to one-third. From the in-depth analysis of accidents generic simulation models were developed. Attention has been paid both to psycho-physical characteristics as well as on the social and physical environment and their specifics in conjunction with seniors. By simulating the defined scenarios and varying the defined relevant parameters, accident influencing factors were examined as a basis for avoidance. In addition, the parameters were varied to show the influence from the vehicle, the pedestrian and the infrastructure to avoid the accident or to characterize the conditions for which the accident is inevitable.
The National Highways Development Project in India is aimed at upgrading over 12,000 km of national highways from 2-lane undivided roads to 4-lane divided roads. With nearly 40% of fatal crashes being reported on national highways, the effect of this project on road safety needs to be assessed. Researchers carried out on-site crash investigations and in-depth crash data collection for a period of 45 to 60 days on four 2-lane undivided highways and a 4-lane divided highway. Based on 76 crashes examined, researchers found a shift of crash pattern from head-on collisions on undivided 2- lane highways to front-rear collisions on divided 4-lane highways. This paper presents the methodology, analysis of crashes examined, and the critical safety problems identified for greater consideration in future highway development projects. This paper also highlights the need and significance of in-depth crash investigations to understand local traffic conditions and problems in India.
Analysis of pedestrian leg contacts and distribution of contact points across the vehicle front
(2015)
Determining the risk to pedestrians that are impacted by areas of the front bumper not currently regulated in type-approval testing requires an understanding of the target population and the injury risk posed by the edges of the bumper. National statistics show that approximately 10% of all accident casualties are pedestrians, with 20% to 30% of these pedestrian casualties being killed or seriously injured. However, the contact position across the front of the bumper is not recorded in national statistics and so in-depth accident databases (OTS, UK and GIDAS, Germany) were used to examine injury risk in greater detail. The results showed that some injury types and severities of injuries appear to peak around the bumper edges. Although there are sometimes inconsistencies in the data, generally there is no evidence to suggest that the edges of the bumper are less likely to be contacted or cause injury.
In this study, the mean profile depth (MPD) that expresses roughness of road pavements was calculated using the road survey equipment vehicle and the calculated MPD was compared with the real number of traffic accidents. The analysis method used in this study was to classify the appropriate clustering in relation to traffic accidents using the K-means clustering and to compare this with the presence of traffic accidents via the MPDs to derive the result. K-means clustering was used in the analysis method and four clusters were found using the clustering analysis results. The center of each cluster was 0.627, 0.850, 1.118, and 1.237, respectively. The result of this study is expected to be utilized as foundational research in the traffic safety area.
Analysis of the accident scenario of powered two-wheelers on the basis of real-world accidents
(2013)
For the first time since 20 years the German national statistics of traffic accidents revealed an increasing number of fatalities and seriously injured persons in 2011. This negative development was especially caused by increasing numbers in all groups of vulnerable road users (VRU). Furthermore, the comparison of fatality reduction rates between several categories of road users shows that persons on motorcycles show the worst performance over years. Although every second fatality in German traffic accidents is still a car occupant, users of PTW make up more than 20% in the meantime. Assuming further improvements in the field of occupant protection this trend will continue. For that reason, a study on the basis of real-world accidents was conducted to describe the accident scenario involving motorcycles and to identify the reasons of the above-described fact. Approximately 1.800 motorcycle accidents out of GIDAS database were used for the analyses. The first part of the study deals with the question how representative the GIDAS database is for the German motorcycle accident scenario. Afterwards, detailed descriptive statistics on motorcycle accidents were presented considering numerous parameters about the accident scene, environmental influences, vehicle information, individual characteristics, interview data, injury severity and injury causation. One important point is the identification of the most frequent critical situations that are typical for motorcycle accidents. Furthermore, a special focus was on accident causation. Finally, conspicuous facts out of the analysis are emphasized. All in all, the study gives a comprehensive overview about the German motorcycle accident scenario. One the one hand, the use of weighted GIDAS data allows representative and robust statements on the basis of large case numbers; on the other hand highly detailed conclusions can be drawn. The results of the study help to understand the particularities of motorcycle accidents and provide approaches for further improvements in the field of PTW safety.
Radfahrer-Schutzhelme sind ab Mitte der 70er Jahre durch Einsatz von neuen Materialien entscheidend verbessert worden. Sie bestehen heute fast immer aus einer circa 20 Millimeter dicken Schale aus geschäumtem Polystyrol, und in den meisten Fällen existiert eine zusätzliche harte Aussenschale. Für diese Helme wurden Sicherheitsstandards unter anderem in den USA und Australien erarbeitet, deren Schwerpunkte im Stoßdämpfungstest und in der Belastung der Helm-Trageeinrichtung liegen. In Anlehnung an diese Standards wurden 15 Helme des deutschen Marktes nach dem Testverfahren gemäß ECE-R22 für Motorradhelme, jedoch mit einer reduzierten Fallhöhe von 1 Meter, geprüft. Die Mehrheit der Helme erreichte maximale Verzögerungen von unter 200 Gramm, was den Zielvorstellungen vom Arbeitspapier DIN 33954 entspricht. Die Trageeinrichtungen erfüllen alle die vorgegebenen Festigkeitsanforderungen. Eine Literaturstudie zeigt große Helmtrageaktivitäten besonders in Australien, den USA und in Schweden. In diesen Ländern wurde die Helmtragequote seit vielen Jahren durch entsprechende Werbekampagnen, besonders bei Schulkindern, erheblich gesteigert. Der Abbau von psychologischen Barrieren, wie auch staatliche Unterstützung beim Kauf eines Helmes, gehörten zu den Maßnahmen. Bei einzelnen Gruppen wurden Tragequoten bis zu 30 Prozent ermittelt. Demgegenüber sind Radfahrer-Schutzhelme in der Bundesrepublik Deutschland lediglich bei sportlichen Veranstaltungen, weniger jedoch im öffentlichen Straßenverkehr auszumachen.
Die Bundesanstalt für Straßenwesen hat eine Projektgruppe eingerichtet, deren Aufgabe es ist, die Erkenntnisse über Sachstand und Entwicklungen auf dem Gebiet des Rettungswesens zu systematisieren und zu interpretieren. Auf dieser Grundlage werden Problembereiche beschrieben und Vorschläge für Forschungsaktivitäten erarbeitet, die unter anderem im Rahmen der Forschungsplanung der BASt berücksichtigt werden sollten, beziehungsweise die von anderen Trägern mit Unterstützung durch die BASt durchgeführt werden sollten. Für den Projektgruppenbericht wurden folgende Themenschwerpunkte genannt: 1. Laienhilfe - ein problematischer Bereich des Rettungswesens, 2. Sind Notfallrettung und Krankentransport eine Einheit?, 3. Kommunikation und Kommunikationssysteme im Rettungswesen, 4. Notarztsysteme - Bestandsaufnahme und kritische Wertung, 5. Bewältigung eines Massenanfalls von Verletzten, 6. Die Verbindung von Rettungsdienst und Krankenhaus - eine Schwachstelle?, 7. Leistungsfähigkeit, Wirksamkeit und Effizienz von Rettungssystemen.
Each year the traffic accident research teams in Dresden and Hanover provide an in-depth investigation of approximately two thousand accidents, aggregated in the GIDAS database. To accomplish a comprehensive review of each traffic accident recorded, a sensible and thorough encoding of suffered injuries is indispensable. The Abbreviated Injury Scale by AAAM offers a valuable and handy solution to achieve this goal. However, there were a few difficulties in the use of the AIS that came up in the past, which let to necessary improvements for the utilization of the AIS 2005 for GIDAS.
From literature well-known analyzes on risks, hazards and causes of accidents of older drivers are amended by the present study in which a comparison of the specific features of accident causes of older car drivers (older than 60 years) and of younger car drivers (under 25 years) is conducted. Mainly the question is pursued if specific errors, mistakes and lapses are predominant in the two different age groups. The analysis system ACAS (Accident Causation Analysis System) used hereby consists of a sequential system of accident causation factors from the human, the technical and the infrastructural field, whereupon for this study the influence of the human features on the accident development in two different age groups is of interest. ACAS is both an accident model and an analysis and classification system, which describes the human participation factors of an accident and their causes in the temporal sequence (from the perceptibility to concrete action errors) taking into consideration the logical sequence of individual basic functions. In five steps (categories) of a logical and temporal sequence the hierarchical system makes human functions and processes as determinants of accident causes identifiable. The methodology specifically focuses on the use in so-called "In-Depth" and "On-Scene" investigation studies. With the help of the system for each accident participant one or more of five hypotheses of human cause factors are formed and then specified by appropriate verification criteria. These hypotheses in turn are further specified by indicators in such manner that the coding of the causation factors by a code system meets the needs of database processing and are accessible to a quantitative data analysis. The first results of the descriptive comparison of the two age groups concern mainly differences in the functional levels "information admission/perception" (where the elderly drivers have more difficulties than the young ones) and "information processing/evaluation" (where the younger drivers show more problems). Concerning the cognitive function of "planning" the group of younger drivers seems to be more often involved in an accident because of excessive speed.
The effect of fatigue on driving has been compared to the effect of alcohol impairment in both driver performance and crash studies. However are crash characteristics and causation mechanisms similar in crashes involving fatigue to those involving alcohol when studied in the real world? This has been explored by examining data held in the EC project SafetyNet Accident Causation Database. Causation data was recorded using the SafetyNet Accident Causation System (SNACS). The focus was on Cars/MPV crashes and drivers assigned the SNACS code Alcohol or Fatigue. The Alcohol group included 44 drivers and the Fatigue group included 47. "Incorrect direction" was a frequently occurring critical event in both the Alcohol and Fatigue groups. The Alcohol group had more contributory factors related to decision making and the Fatigue group had more contributory factors relating to incorrect observations. This analysis does not allow for generalised statements about the significance of the similarities and differences between crashes involving alcohol and fatigue, however the observed differences do suggest that attempts to quantify the effect of fatigue by using levels of alcohol impairment as a benchmark should be done with care.
This contribution introduces a number of psychological methods of analysis that are based on the practice-oriented collection of information directly at the site of an accident and that allow for an analysis and coding of the accident causes. Investigation examples and examples of the data combinations with basic medical and technical data are outlined. Objective of the collection is the inter-disciplinary investigation of human factors in the causes of accidents ("human-factor-analysis"). The psychological data are incorporated according to an integrative model for accident causes based on empiric algorithms in the data base of the accident research, where the clustered evaluation potential of comprehensive factors of the accident development can be illustrated. The central theoretical concept for the basic model of the progress of the accident from a psychological point of view comprises psychological indicators for the evaluation of the site of the accident for the analysis of the perception conditions as well as a classification of the gleaned data into the accident progress model according to chronological and local criteria. Perception conditions, action intentions and executions as well as conditions limiting perception and actions are acquired, using a questionnaire for persons involved in an accident, and are also integrated into the data structure concerning weighted feature characteristics as well as combined with other relevant features. Suitable systematization tools for the collection and coding of psychological accident development parameters have to be provided, which require primarily a model image of the corresponding processes from the persons involved in the accident (perceptions, expectations, decisions, actions). The interactive accident model contains components of the models by KÜTING 1990, MC DONALD 1972, SURREY 1969 and RASMUSSEN 1980. Based on the inter-action of the three partial systems "person", "vehicle" and "environment", the first step is the assessment of the situation by the persons involved in the accident. This is dependent on the personal attitudes and motives, on experiences and expectations concerning the progress of the situation. Subsequently, data concerning the manner of the coping with the ambiguous state as well as with the instable state (emergency reaction immediately before the accident occurs) are collected. The factors relating to the persons involved in the accident are gathered on several levels using corresponding questionnaires. The coding of the found and collected characteristics is conducted in a multidimensional evaluation relating to the technical results of the accident reconstruction and of the psychological classification, which are subsequently integrated in coded form into the data base of the accident research. The result of this analysis is a description of the development of the accident depicted on a chronological vector from a perception and decision theoretical perspective. This is explained in detail using exemplary cases.
An eCall device has been mounted on some vehicles in France since 2003. It is an integrated car radio/GSM/GPS system that can be used with a SIM card. When an accident occurs, a call can be sent manually or automatically made to a telephone call centre. Knowing the geographic location, the vehicle identity and the possibility of a direct communication with the people involved enables the nearest emergency services to be called out. In this context, the LAB / CEESAR have set up a study aimed at evaluating the effectiveness of this system. The purpose of this paper is to detail the E-call system evaluation method of effectiveness used and give a global synthesis of the results.
Mit dem BASt-Projekt 82.232/2002 "Bedeutung der Fahrpraxis für den Kompetenzerwerb beim Fahrenlernen" sollen Erkenntnisse zu einer verbesserten Fahranfängervorbereitung und zur Verringerung des Fahranfängerrisikos erarbeitet werden. In der vorliegenden Literaturstudie als erstem Projektteil wurde eine umfassende Analyse des internationalen Erkenntnistandes zum Fahrfertigkeitserwerb unter besonderer Berücksichtigung des Einflussfaktors Fahrerfahrung durchgeführt. Herangezogen wurden Forschungsbefunde zu Kompetenzdefiziten junger Fahrer und Fahranfänger, zum Vorgehen bei der Ausbildung und Fahrerlaubniserteilung sowie zu weiteren Trainingsmaßnahmen, die sich an Fahranfänger richten. Zur Identifikation von Risikofaktoren und Bestimmung von Kompetenzdefiziten von Fahranfängern und jungen Fahrern werden meist Unfallstatistiken und Vergleiche von Fahranfängern (Novizen) und mit fahrerfahrenen Fahrern (Experten) herangezogen. Das Forschungsvorgehen ist hauptsächlich themengeleitet (zum Beispiel Unfalltypen und "ursachen, situationale Bedingungen, Alkohol, Fahrverhalten, Risiko- und Gefahrenwahrnehmung) und methodisch durch querschnittliche Daten- beziehungsweise Erhebungsdesigns gekennzeichnet. Längsschnittstudien, die sich gezielt mit der Entwicklung von Fahrfertigkeiten befassen, sind in der Literatur kaum zu finden. Es zeigt sich insgesamt, dass zwar viel darüber bekannt ist, was Fahranfänger und junge Fahrer " vor allem nach dem Fahrerlaubniserwerb " nicht können, unklar ist bisher jedoch wie lange der Fahrfertigkeitserwerb tatsächlich andauert und in welchen zeitlichen Sequenzen einzelne Fertigkeiten erlernt werden. Im Zusammenhang mit der Vorbereitung von Fahranfängern wird national und international mit hohem Aufwand an Maßnahmen zur Senkung der hohen Unfallraten junger Fahrer gearbeitet. Es steht eine Vielzahl an Veröffentlichungen über die Gestaltung der Fahrausbildung und das Vorgehen bei der Fahrerlaubniserteilung zur Verfügung. Innerhalb und außerhalb Europas sind in diesem Bereich große Unterschiede festzustellen. Als genereller Trend ist in den letzten Jahren zu beobachten, dass in der Ausbildung lange Lernzeiten angestrebt werden, um eine möglichst umfassende Fahrkompetenz aufzubauen. Unterschiedliche Auffassungen bestehen vor allem zu folgenden Aspekten: (1) Ausbildungsdauer und zeitliche Sequenz der Ausbildungsabschnitte, (2) Anteil und Rolle des formalen Lernens, (3) Verhältnis von theoretischer und praktischer Ausbildung und (4) Art und Zeitpunkt der Erteilung von Fahrerlaubnisrechten. Diese Aspekte werden vor allem hinsichtlich ihrer Implikationen für den Fahrfertigkeitserwerb im Ausbildungsverlauf diskutiert. Weiterhin werden ausbildungsergänzende Maßnahmen für Fahranfänger angeboten, bei denen Formen des E-Learnings (computerbasierte, interaktive Lernprogramme und simulatorgestützte Trainings) und der personalen Instruktion (Aufbaukurse mit theoretischen und fahrpraktischen Lerneinheiten) zu nennen sind. Beispielhaft werden einige dieser ergänzenden Ausbildungsmaßnahmen vorgestellt und hinsichtlich ihrer Rolle im Prozess des Fertigkeitserwerbs diskutiert. Die umfangreiche Literatur zum Verhalten und zur Ausbildung junger Fahrer spiegelt die nachhaltigen Bemühungen zur Senkung der hohen Unfallrate junger Fahrer wider. Dennoch hat sich die Problemsituation bisher nur wenig geändert. Dies könnte mit dadurch bedingt sein, dass die Forschung sich bislang überwiegend mit der Frage nach dem "WAS" des Lernens und weniger mit der Frage nach dem "WANN" oder dem "WIE" beschäftigt hat. Die Aufgabe einer weiteren Studie zur Frage des Kompetenzerwerbs kann daher nicht sein, den vorhandenen Katalogen von notwendigen Kompetenzen einen weiteren hinzuzufügen, sondern einen Ansatz zu verfolgen, der den Lernprozess selbst thematisiert und empirisch überprüft. Ein entsprechender Ansatz wird vorgeschlagen.
Es wurden Unfälle, die im Rahmen des Forschungsprojektes "Erhebungen am Unfallort" dokumentiert wurden, hinsichtlich der Häufigkeit und der Charakteristik von Pkw-Mehrfachkollisionen analysiert. Beschrieben wurden bei einer vergleichenden Gegenüberstellung von Einfach- und Mehrfachkollisionen die Besonderheiten, die die Mehrfachkollisionen prägen, und zwar im Vorfeld des Unfallgeschehens wie auch im Unfallgeschehen selbst. Mit allen beobachteten Unterschieden der Merkmalsausprägungen ist eine Steigerung der Ausgangsgeschwindigkeit, also der Geschwindigkeit, die vor dem Unfallgeschehen gefahren wurde, verbunden. Die Entstehungswahrscheinlichkeit von Mehrfachkollisionen steigt mit der Zunahme der Fahrgeschwindigkeiten. Geschlechtsspezifische Unterschiede sind lediglich für die Wahl der Ausgangsgeschwindigkeiten vor dem Unfallereignis von Bedeutung. Keine Rolle spielen Fahrzeugeigenschaften bei der Entstehung von Mehrfachkollisionen. Bei Mehrfachkollisionen wurde häufig beobachtet, dass Pkw seitlich mit Objekten am Straßenrand (Leitplanke, Bäume etc.) zusammenstoßen. Bei Seitenkollisionen treten überdurchschnittlich schwere Fahrzeugdeformationen sowie schwere Verletzungen am Kopf, im Thoraxbereich und an den oberen Extremitäten auf. Die Rekonstruktion von Mehrfachkollisionen wird durch ein oftmals komplexes Spuren- und Deformationsbild erschwert. Hilfreich erweisen sich fotogrammetrische Verfahren wie Stereoaufnahmen und Draufsichtfotografie.
In der Prozessevaluation wurden 3.780 Modellversuchsteilnehmer während der Phase des begleiteten Fahrens bis zu viermal und 1.735 Begleitpersonen einmalig zu unterschiedlichen Aspekten der Maßnahmenumsetzung befragt. Die Teilnahmegründe der Jugendlichen und ihrer Begleiter ließen erkennen, dass das Begleitete Fahren als Bestandteil der Fahranfängervorbereitung gut in den altersspezifischen Lebensabschnitt der jungen Fahrer integriert werden konnte. Insgesamt belegen die Befunde eine große Zugangsfreundlichkeit des Modells und eine hohe Praktikabilität. Im Durchschnitt erbrachten Jugendliche an Tagen mit Begleitfahrt eine Fahrleistung von 32,4 km (Median: 24,0 km). Monatlich wurde eine mittlere Fahrleistung von 318,5 km erbracht. In durchschnittlich acht Monaten Begleitdauer erwarben die Jugendlichen etwa 2.400 km Fahrpraxis. Bei voller Ausschöpfung der Begleitdauer von zwölf Monaten ergab sich eine durchschnittliche Fahrleistung von 3.800 km. Hauptfahrtzwecke waren private Fahrten (Familie, Besuche), Haushaltserledigungen, Freizeitfahrten und Fahrten zur Schule / Ausbildung. Hinsichtlich der Interaktion zwischen Fahranfänger und Begleiter ergibt sich auf der Grundlage zahlreicher Einzelbefunde das Bild einer angemessenen Rolleninterpretation und -ausübung im Sinne eines konstruktiven Zusammenwirkens von Fahranfänger und Begleiter beim fahrpraktischen Kompetenzerwerb. Im Verlauf der Begleitphase war eine deutliche Abnahme unsicherer Fahranfänger zu beobachten. Dies ist Ausdruck des subjektiv wahrgenommenen Zuwachses von Fahrerfahrung während der Begleitphase. Unfälle, Verkehrsverstöße und Verwarnungen in der Begleitphase wurden behördlicherseits nur in geringem Umfang berichtet. Dies lässt erkennen, dass die Maßnahmenpraxis den gebotenen Verkehrssicherheitserfordernissen in hohem Maße gerecht wird. Die erhebliche Ausweitung der fahrpraktischen Vorbereitung durch das Modell "Begleitetes Fahren ab 17 Jahre" hat zu einer strukturellen Veränderung der Fahranfängervorbereitung in Deutschland geführt. Die gegebenen Möglichkeiten hinsichtlich der Nutzungsdauer der Begleitphase und des Umfangs der erbrachten Fahrleistung erscheinen gleichwohl noch nicht ausgeschöpft und empfehlen sich daher als Gegenstand künftiger Optimierungsanstrengungen. Neben der vertieften Ausschöpfung des originären Maßnahmenpotenzials eines längerfristigen fahrpraktischen Erfahrungsaufbaus empfiehlt sich zudem eine sinnvolle Verbindung dieses Maßnahmenansatzes mit weiteren zielführenden Maßnahmen im Rahmen eines integrierten Systems der Fahranfängervorbereitung in Deutschland.
Die Behandlungskosten von Unfallverletzten werden herkömmlich durch Multiplikation der durchschnittlichen Krankenhaus-Verweildauer mit dem vollpauschalierten und für alle Patienten gleichen Krankenhaus-Tagessatz ermittelt. Zielsetzung der vorliegenden Untersuchung ist es, den tatsächlichen Leistungsaufwand für die Gruppe der Unfallverletzten differenzierter zu erfassen, und zwar durch Addition von Einzelleistungen, die den Input für die stationäre Behandlung darstellen. Eine solche fallbezogene Kostenkalkulation wurde in ausgewählten Krankenhäusern für alle straßenverkehrsunfallverletzen Patienten des Jahres 1989 vorgenommen. Für Unfallverletzte in ambulanter Behandlung ergeben sich durchschnittliche Fallkosten in Höhe von 244 DM. Für die 5 häufigsten Einzeldiagnosen wurden folgende Werte ermittelt. 1. Prellungen der unteren Extremitäten: DM 287 je Patient. 2. Verstauchungen und Zerrungen im Rückenbereich: DM 149 je Patient. 3. Prellungen des Kopfes und des Halses: DM 326 je Patient. 4. Prellungen der oberen Extremitäten: DM 196 je Patient. Für Unfallverletzte in stationärer Behandlung ergeben sich durchschnittliche Fallkosten in Höhe von DM 4.824. Die Kosten liegen bei der Hälfte aller stationär behandelten Patienten unterhalb von DM 2.000. Bei 37 Prozent der Verletzten belaufen sie sich auf einen Betrag zwischen DM 2.000 und DM 7.000, wohingegen 13 Prozent der Fälle eine Behandlung benötigte die mehr als DM 10.000 an Kosten verursachte. Betrachtet man die Kosten der 10 häufigsten Einzeldiagnosen, so lassen sich zwei Gruppen bilden. Gehirnerschütterungen, Prellungen und Verstauchungen verursachten Kosten von weniger als der Hälfte des Durchschnittswertes von DM 4.824, wogegen für Frakturen als zweiter Gruppe weit darüber liegende Beträge errechnet wurden. Die Behandlungskosten von Unfallverletzungen mit Todesfolge liegen aufgrund der Verletzungsschwere bei DM 17.246 im Durchschnitt. Die Ergebnisse zeigen, dass die durchschnittlichen Behandlungskosten von Unfallverletzten in Akutkrankenhäusern in etwa den durchschnittlichen Behandlungskosten aller Patienten in Akutkrankenhäusern entsprechen.
Accident data shows that the vast majority of pedestrian accidents involve a passenger car. A refined method for estimating the potential effectiveness of a technology designed to support the car driver in mitigating or avoiding pedestrian accidents is presented. The basis of the benefit prediction method consists of accident scenario information for pedestrian-passenger car accidents from GIDAS, including vehicle and pedestrian velocities. These real world pedestrian accidents were first reconstructed and the system effectiveness was determined by comparing injury outcome with and without the functionality enabled for each accident. The predictions from Volvo Cars" general Benefit Estimation Model are refined by including the actual system algorithm and sensing models for a relevant car in the simulation environment. The feasibility of the method is proven by a case study on a authentic technology; the Auto Brake functionality in Collision Warning with Full Auto Brake and Pedestrian Detection (CWAB-PD). Assuming the system is adopted by all vehicles, the Case Study indicates a 24% reduction in pedestrian fatalities for crashes where the pedestrians were struck by the front of a passenger car.
The paper presents a methodology for the benefit estimation of several secondary safety systems for pedestrians, using the exceptional data depth of GIDAS. A total of 667 frontal pedestrian accidents up to 40kph and more than 500 AIS2+ injuries have been considered. In addition to the severity, affected body region, exact impact point on the vehicle, and the causing part of every injury, the related Euro NCAP test zone was determined. One results of the study is a detailed impact distribution for AIS2+ injuries across the vehicle front. It can be stated, how often a test zone or vehicle part is hit by pedestrians in frontal accidents and which role the ground impact plays. Basing on that, different secondary safety measures can be evaluated by an injury shift method concerning their real world effectiveness. As an example, measures concerning the Euro NCAP pedestrian rating tests have been evaluated. It was analysed which Euro NCAP test zones are the most effective ones. In addition, real test results have been evaluated. Using the presented methodology, other secondary safety like the active bonnet (pop-up bonnet) or a pedestrian airbag measures can be evaluated.
Die Regelwerke RABT 2006 beziehungsweise 2004/54/EG legen heute die einheitlichen Mindestanforderungen an die Ausstattung und den Betrieb von Straßentunneln in Deutschland fest. Wird von diesen Anforderungen in begründeten Fällen abgewichen oder weist ein Tunnel eine besondere Charakteristik auf, so ist durch eine Risikoanalyse aufzuzeigen, dass durch den Einsatz alternativer Maßnahmen ein vergleichbar hohes Sicherheitsniveau gewährleistet werden kann. Um die in den Richtlinien genannte Forderung zu konkretisieren und eine praktische Umsetzung zu ermöglichen, wurde eine quantitative Methodik zur Sicherheitsbewertung von Straßentunneln entwickelt. Als Grundlage für die Herleitung der erforderlichen statistischen Eingangsgrößen wurden im Rahmen einer Unfallanalyse für 80 Tunnel rund 1'000 Unfallprotokolle spezifisch ausgewertet. Mit der Methodik können die Vorgaben für eine einheitliche und vergleichbare Durchführung von Sicherheitsbeurteilungen geschaffen werden. Bei der Entwicklung der Methodik wurden die Erfahrungen aus anderen, vergleichbaren Sicherheitsbereichen herangezogen und die entsprechenden Ansätze auf ihre Tauglichkeit hin für eine Anwendung im vorliegenden Kontext geprüft. Daneben wurden die aktuellen Entwicklungen und methodischen Ansätze zur Umsetzung der Forderungen gemäß Artikel 13 der Richtlinie 2004/54/EG im Ausland analysiert und die entsprechenden Erkenntnisse soweit sinnvoll in die Entwicklung der Methodik einbezogen. Die Methodik basiert in ihren Grundsätzen und dem gewählten Vorgehen auf einem risikoorientierten Ansatz, der er in verschiedenen Ländern zu unterschiedlichsten Sicherheitsfragen bereits erfolgreich angewandt wird. Bei der Erarbeitung der Methodik wurde darauf geachtet, dass der gewählte Ansatz neben der Erarbeitung der wissenschaftlichen Grundlagen im Hinblick auf die künftige Anwendung auch einen engen praxisorientierten Bezug aufweist. Die Methodik gibt aber bewusst nicht zu allen Aspekten "rezeptartige" Vorgaben vor, sondern definiert einen Rahmen, innerhalb dessen die konkrete Anwendung durchzuführen ist. Für das Regelwerk wurden Empfehlungen zum weiteren Vorgehen abgegeben sowie weiterer Forschungsbedarf aufgezeigt, welcher insbesondere die Aspekte der Risikobewertungskriterien sowie der Datengrundlagen betrifft. Um die Suche innerhalb des Berichtes zu erleichtern, wird dieser zusätzlich noch einmal auf der beiliegenden CD angeboten. Sie enthält darüber hinaus die Anlagen und den Bericht in englischer Sprache.
Bei Straßenverkehrsunfällen werden volkswirtschaftliche Ressourcen vernichtet und die Leistungsfähigkeit des Wirtschaftssystems entsprechend beeinträchtigt. Die Bewertung der volkswirtschaftlichen Schäden ist unerlässlich, um Maßnahmen zur Verringerung von Straßenverkehrsunfällen beurteilen zu können. Das Bewertungsverfahren zur Ermittlung der volkswirtschaftlichen Kosten durch Straßenverkehrsunfälle wurde in den letzten Jahren sowohl für Personen- als auch für Sachschäden überarbeitet. Mit dem neuen Verfahren wurde das Unfallgeschehen von 1995 bis 1998 bewertet. Die Entwicklung der Unfallkosten zeigt, dass eine erfolgreiche Verkehrssicherheitspolitik zu einer erheblichen Kostenentlastung der Volkswirtschaft und entsprechender Steigerung der Lebensqualität beitragen kann. Allein im betrachteten Zeitraum von 4 Jahren haben Straßenverkehrsunfälle volkswirtschaftliche Kosten in Höhe von fast 280 Milliarden DM verursacht. Diese Kosten sind ein Beleg dafür, dass die Verbesserung der Verkehrssicherheit eine verkehrspolitische Daueraufgabe ersten Ranges bleibt. Gleichzeitig wurden nach Ortslagen differenzierte Unfallkostensätze ermittelt, die als Eingangsdaten für gesamtwirtschaftliche Wirtschaftlichkeitsanalysen von Straßenverkehrsmaßnahmen - zum Beispiel nach den "Empfehlungen für Wirtschaftlichkeitsuntersuchungen von Straßen" (EWS 97) - dienen.
Ziel der Untersuchung war es, ein standardisiertes Verfahren zur Abschätzung der Auswirkungen von Ortsumgehungen auf die Verkehrssicherheit zu entwickeln. Dieses Verfahren soll den Netzzusammenhang berücksichtigen und eine Bilanzierung der Verkehrssicherheitswirkungen von Ortsumgehungen ermöglichen. Dabei sind auch Umbaumaßnahmen und veränderte Verkehrsregelungen in den Ortsdurchfahrten, sofern diese im Zusammenhang mit der Ortsumgehung realisiert werden, zu berücksichtigen. Damit soll eine verbesserte Entscheidungsgrundlage für die Bewertung von Ortsumgehungen aus Verkehrssicherheitssicht zur Verfügung gestellt werden. Das standardisierte Verfahren wurde anhand von konkreten Beispielen auf seine Aussagegenauigkeit hin überprüft. Hierfür wurden die realen Verkehrssicherheitswirkungen von 21 umgesetzten Ortsumgehungen in einem definierten relevanten Straßennetz erhoben und bilanziert. Bei der Bilanzierung der Verkehrssicherheitswirkungen der 21 Beispiele im Vorher-Nachher-Vergleich zeigte sich, dass die Knotenpunkte im Zuge der Ortsumgehungen wesentlich dazu beitragen, ob der Vorher-Nachher-Vergleich positiv oder negativ ausfällt. Resümierend kann festgehalten werden, dass über das (neue) Berechnungsverfahren die Möglichkeit besteht, die Auswirkungen von Ortsumgehungen auf die Verkehrssicherheit mit relativ geringem Aufwand abzuschätzen, wenn die Verkehrsbelastungen für den Vorher-Fall (ohne Ortsumgehung) und für den Nachher-Fall (mit Ortsumgehung) zur Verfügung stehen. Das Verfahren weist die voraussichtlichen Verkehrssicherheitswirkungen, die durch den Bau einer Ortsumgehung im Straßennetz entstehen, in ihrer Tendenz und den Absolutzahlen genauer aus als das derzeit angewendete Verfahren nach EWS.
Die Ermittlung von Grundunfallkostenraten und Quantifizierung von Zuschlägen für Landstraßenquerschnitte sind Ziel dieses Forschungsvorhabens. Die Ergebnisse sollen eine Bewertungsgrundlage im Handbuch für die Verkehrssicherheit von Straßen (HVS) darstellen. 3.600 km Landstraße aus sechs Bundesländern liegen dem Untersuchungskollektiv zu Grunde. Neben dem mehrjährigen Unfallgeschehen bilden Daten der SIB und Erhebungen aus Streckenbefahrungen die Datengrundlage der Untersuchungen. Die Zuordnung der Streckenabschnitte erfolgte in Anlehnung an den Entwurf der Richtlinie für die Anlage von Landstraßen (RAL) in fünf verschiedene (Regel-) Querschnittsgruppen. Multivariate Modelle zur Beschreibung der Unfallhäufigkeit bilden die mathematische Grundlage der Analyse. Gegenüber monokausalen Betrachtungen weisen sie den Vorteil auf, eine Vielzahl von Einflussgrößen zu erfassen sowie mögliche Abhängigkeiten zwischen verschiedenen Variablen zu berücksichtigen. Für die verschiedenen Straßenquerschnitte und Einmündungen mit Vorfahrtregelung durch Verkehrszeichen wurden jeweils drei Modelle nach Unfallschwere erstellt. Zu Grunde liegende Merkmale wurden auf ihren signifikanten Erklärungsanteil zur Beschreibung der Unfallhäufigkeit geprüft und entsprechend im Modell als Zuschlag berücksichtigt. Auf Basis dieser Ergebnisse wurden Funktionen zum Verlauf der Unfallrate und Unfallkostenrate erzeugt. Grundunfallkostenraten beschreiben das fahrleistungsbezogene Unfallkostenniveau eines Netzelements, welches bei regelkonformem Ausbau der Strecke erreicht werden kann. Da in den Modellen auch Merkmale berücksichtigt sind, die kein Defizit im eigentlichen Sinne darstellen, entspricht die Höhe der UKR ohne jegliche Zuschläge einem Grundniveau. Diesem sind Zuschläge, unterteilt in Defizite und die Streckencharakteristik beschreibende Eigenschaften, zuzuordnen. Anhand der Modelle kann nachgewiesen werden, dass verschiedene Straßenquerschnitte ein unterschiedliches Grundsicherheitsniveau aufweisen. Zwischen Unfallhäufigkeit und DTV besteht ein nichtlinearer Zusammenhang. Die Unfallrate bzw. Unfallkostenrate stellt somit eine vom DTV abhängige Kenngröße dar. In Abhängigkeit des Querschnitts besitzen verschiedene Merkmale einen Einfluss auf die Verkehrssicherheit. Die Größenordnung der Zuschläge kann als Anteil am Grundniveau der UKR beschrieben werden. Die ermittelten Zuschläge wurden ggf. vergleichend betrachtet und im Rahmen einer plausibilisierten Bewertung der Querschnitte angepasst. In Anlehnung an das HVS erfolgt die Darstellung der Berechnung für Grundunfallkostenraten und deren Zuschläge für Landstraßenquerschnitte. Dabei werden zwei verschiedene Ansätze vorgestellt. Die Ergebnisse für Einmündungen mit Vorfahrtregelung durch Verkehrszeichen besitzen empfehlenden Charakter.
An increased use of bicycles comes along with an increased number of bicycle accidents. Bicycle accidents are more frequent than recorded by the police. To evaluate the real number of bicycle accidents during 12 months in Münster, Germany, injuries were collected by the Police and in each emergency unit anonymously. 2,153 patients had to be treated in a hospital, nearly triple the number of accidents that were registered by the police. Beside fractures of the upper extremities with major surgery, traumatic brain injuries were the leading cause for hospital admission. Bicycle helmet use can reduce traumatic brain injuries and the related number of deaths and hospital admissions. Laws on bicycle helmet might decrease the use of bicycles and therefore the reduction of positive health benefits. Other methods of accident prevention may lead to positive effects as helmet legislation as well, while having no reduction in bicycle use.
Still correlated with high mortality rates in traffic accidents traumatic aortic ruptures were frequently detected in unprotected car occupants in the early years. This biomechanical analysis investigates the different kinds of injury mechanisms leading to traumatic aortic injuries in todays traffic accidents and how the way of traffic participation affects the frequency of those injuries over the years. Based on GIDAS reported traffic accidents from 1973 to 2014 are analyzed. Results show that traumatic aortic injuries are mainly observed in high-speed accidents with high body deceleration and direct load force to the chest. Mostly chest compression is responsible for the load direction to the cardiac vessels. The main observed load vector is from caudal-ventral and from ventral solely, but also force impact from left and right side and in roll-over events with chest compression lead to traumatic aortic injuries. Classically, the injury appeares at the junction between the well-fixed aortic arch and the pars decendens following a kind of a scoop mechanism, a few cases with a hyperflexion mechanism are also described. In our analysis the deceleration effect alone never led to an aortic rupture. Comparing the past 40 years aortic injuries shift from unprotected car occupants to today's unprotected vulnerable road users like pedestrians, cyclists and motorcyclists. Still the accident characteristics are linked with chest compression force under high speed impact, no seatbelt and direct body impact.
The presence and performance of Advanced Driver Assistance Systems (ADAS) has increased over last years. Systems available on the market address also conflicts with vulnerable road users (VRUs) such as pedestrians and cyclists. Within the European project PROSPECT (Horizon2020, funded by the EC) improved VRU ADAS systems are developed and tested. However, before determining systems" properties and starting testing, an up-to-date analysis of VRU crashes was needed in order to derive the most important Use Cases (detailed crash descriptions) the systems should address. Besides the identified Accident Scenarios (basic crash descriptions), this paper describes in short the method of deriving the Use Cases for car-to-cyclist crashes. Method Crashes involving one passenger car and one cyclist were investigated in several European crash databases looking for all injury severity levels (slight, severe and fatal). These data sources included European statistics from CARE, data on national level from Germany, Sweden and Hungary as well as detailed accident information from these three countries using GIDAS, the Volvo Cars Cyclist Accident database and Hungarian in-depth accident data, respectively. The most frequent accident scenarios were studied and Use Cases were derived considering the key aspects of these crash situations (e.g., view orientation of the cyclist and the car driver- manoeuvre intention) and thus, form an appropriate basis for the development of Test Scenarios. Results Latest information on car-to-cyclist crashes in Europe was compiled including details on the related crash configurations, driving directions, outcome in terms of injury severity, accident location, other environmental aspects and driver responsibilities. The majority of car-to-cyclist crashes occurred during daylight and in clear weather conditions. Car-to-cyclist crashes in which the vehicle was traveling straight and the cyclist is moving in line with the traffic were found to result in the greatest number of fatalities. Considering also slightly and seriously injured cyclists led to a different order of crash patterns according to the three considered European countries. Finally the paper introduced the Use Cases derived from the crash data analysis. A total of 29 Use Cases were derived considering the group of seriously or fatally injured cyclists and 35 Use Cases were derived considering the group of slightly, seriously or fatally injured cyclists. The highest ranked Use Case describes the collision between a car turning to the nearside and a cyclist riding on a bicycle lane against the usual driving direction. A unified European dataset on car-to-cyclist crash scenarios is not available as the data available in CARE is limited, hence national datasets had to be used for the study and further work will be required to extrapolate the results to a European level. Due to the large number of Use Cases, the paper shows only highest ranked ones.
Causation of traffic accidents with children from the perspective of all involved participants
(2017)
In the year 2014 about 2,800 children between zero and 14 years got injured due to traffic accidents in Austria. More than 50% were taking part in traffic as active road users like cyclists or pedestrians. Within this study 46 real world traffic accidents between vehicles and children as pedestrians were analysed. In 39 cases, car drivers hit the crossing children. In the other cases, the collision opponents were busses, trucks or motorcycles. Most of the children got hit while crossing a road at urban sites. By analysing the traffic accidents from the perspectives of all involved participants, vehicle drivers and injured children, it is possible to identify factors for each participant, which led to the accident and factors that contributed the accident. The main task is to find patterns in the behaviour of crash victims (children and driver) before the collision. One important fact is that in more than 50% of the analysed cases sight obstructions were an important contributing factor for both, the driver and the child. From drivers view situations in which the child moved unexpected into the driven road lane were often found. For the injured child, factors like: no attention to the road traffic or no sufficient traffic observation were found to be relevant. Further it- possible to sensitise children and adults to possible source of critical traffic situations according to the findings of this study.
Causation patterns and data collection blind spots for fatal intersection accidents in Norway
(2010)
Norwegian fatal intersection accidents from the years 2005-2007 were analysed to identify any causation patterns among their underlying contributing factors, and also to evaluate whether the data collection and documentation procedures used by the Norwegian in-depth investigation teams produces the information necessary to perform causation pattern analysis. A total of 28 fatal accidents were analysed. Details on crash contributing factors for each driver in each crash were first coded using the Driving Reliability and Error Analysis Method (DREAM), and then aggregated based on whether the driver was going straight or turning. Analysis results indicate that turning drivers to a large extent are faced with perception difficulties and unexpected behaviour from the primary conflict vehicle, while at the same time trying to negotiate a demanding traffic situation. Drivers going straight on the other hand have less perception difficulties. Instead, their main problem is that they largely expect turning drivers to yield. When this assumption is violated, they are either slow to react or do not react at all. Contributing factors often pointed to in literature, e.g. high speed, drugs and/or alcohol and inadequate driver training, played a role in 12 of 28 accidents. While this confirms their prevalence, it also indicates that most drivers end up in these situations due to combinations of less auspicious contributing factors. In terms of data collection and documentation, information on blunt end factors (those more distant in time/space, yet important for the development of events) was more limited than information on sharp end factors (those close in time/space to the crash). A possible explanation is that analysts may view some blunt end factors as event circumstances rather than contributing factors in themselves, and therefore do not report them. There was also an asymmetry in terms of reported obstructions to view due to signposts and vegetation. While frequently reported as contributing for turning drivers, they were rarely reported as contributing for their counterparts in the same accidents. This probably reflects an involuntary focus of the analyst on identifying contributing factors for the driver legally held liable, while less attention is paid to the driver judged not at fault. Since who to blame often is irrelevant from a countermeasure development point of view, this underlying investigator mindset needs addressing to avoid future bias in crash investigation reports.
Powered Two Wheelers (PTWs) accidents constitute one of the road safety problems in Europe. PTWs fatalities represent 22% at EU level in 2006, having increased during last years, representing an opposite trend compared to other road users" figures. In order to reduce these figures it is necessary to investigate the accident causation mechanisms from different points of view (e.g.: human factor, vehicle characteristics, influence of the environment, type of accident). SAFERIDER project ("Advanced telematics for enhancing the SAFEty and comfort of motorcycle RIDERs", under the European Commission "7th Framework Program") has investigated PTW accident mechanisms through literature review and statistical analyses of National and In-depth accident databases; detecting and describing all the possible PTW's accident configurations where the implementation of ADAS (Advanced Driver Assistance Systems) and IVIS (In-Vehicle Information Systems) could contribute to avoid an accident or mitigate its severity. DIANA, the Spanish in-depth database developed by CIDAUT, has been analyzed for that purpose. DIANA comprises of accident investigation teams, in close cooperation with police forces, medical services, forensic surgeons, garages and scrap yards. An important innovation is the fact that before injured people arrive to hospitals, photographs and explanations about the possible accident injury mechanisms are sent to the respective hospitals (via 3G GPRS technology). By this, additional information to medical staff can be provided in order to predict in advance possible internal injuries and select the best medical treatment. This methodology is presented in this paper. On the other hand, the main results (corresponding to road, rider and PTW characteristics; pre and post-accident manoeuvres; road layout; rider behaviour; impact points; accident causations;...) from the analyses of the PTW accidents used for SAFERIDER are shown. Only accident types relevant to ADAS and IVIS devices have been considered.
One goal of the assessment of the crashworthiness of passenger cars is to characterize the potential of injury outcome to occupants of cars involved in an accident. This can be achieved by the help of an index that puts the number of injured occupants of passenger cars in relation to the number of cars involved in an accident. As a consequence, this index decreases with a lower potential of injury and rises with a higher number of injuries while assuming a fixed number of accidents. Another index is introduced that uses an economical weighting of each injury level. The consequential injury costs are calculated using the average economical costs for lightly, severely and fatally injured persons. The calculation of the safety indices is based on an anonymized sample of accident data provided by the Federal Statistical Office. An index of Mercedes passenger car drivers depending on the year of registration between 1991 and 2006 is compared to the index of drivers of cars of other makes within the same range of registration years.
This study aimed at comparing head Wrap Around Distance (WAD) of Vulnerable Road User (VRU) obtained from the German in-depth Accident Database (GIDAS), the China in-depth Accident Database (CIDAS) and the Japanese in-depth Accident Database (ITARDA micro). Cumulative distribution of WAD of pedestrian and cyclist were obtained for each database (AIS2+) showing that WAD of cyclists were larger than the ones of pedestrians. Comparing three regions, the 50%tile WAD of GIDAS was larger than that of both Asian accident databases. Using linear regression that might predict WAD of pedestrians and cyclists from Impact speed and VRU height, WADs were calculated to be 206cm/219cm (Pedestrian/Cyclist) for GIDAS, 170cm/192cm for CIDAS and 211cm/235cm for ITARDA. In addition, this study may be helpful for reconsideration of WAD measurement alignment between accident reconstruction and test procedures.
In order to enable foreseeing or comparing the benefit of safety systems or driver assistance systems in Germany, in the United States and in Japan, the traffic accident databases in those three countries are examined. The variables used are culpable party, collision partner, accident type, and injury level and the method to re-classify the databases for comparison are proposed. The result indicates that single passenger car fatality is the most frequent in Germany and in the United States, while passenger car vs. pedestrian is the most frequent fatality scenario in Japan. When the casualty by fatality ratio is focused, the greatest difference is observed in rear-end collisions. The ratio of slight injuries in Japan yields about eighteen times as many as those in Germany, and about eight times as many as those in the United States.
In recent years the boundaries between active and passive safety blurred more and more. Passive safety in the traditional term includes all safety aspects to prevent occupants to be injured or at least injury severity should be reduced. Passive Safety starts with the collision (first vehicle contact) and ends with rescue (open vehicle doors). Within this phase the occupant has to be protected by the passenger compartment whereby no intrusion should occur. Active safety on the other side was developed to interact prior to the collision whereby the goal is to prevent accidents. The extensive interaction between active and passive safety led to the terminologies "Primary" and "Secondary" safety whereas the expression Integrated Safety Concept was generated. Within this study the most well documented single vehicle accidents with cars not equipped with ESP were identified from the PENDANT database and reconstructed. Additional cases were found in the database ZEDATU of TU Graz. In comparison each case was simulated with the assumption that the cars were equipped with ESP. The differences regarding accident avoidance or crash severity as well as reduction of injury risk were analysed.
Accidents involving two wheels vehicles represent one of the more important types of accidents in Europe. These accidents are usually not easy to reconstruct specially for the analysis of the injuries and its correlation with accident dynamics and evidences. Different methodologies are applied in this work for the reconstruction of two wheeler accidents, especially accident involving motorcycles. From the typologies of road evidences like skid marks, to the use of Pc-Crash and the use of Madymo models, different reconstruction of real accidents are presented. One of the questions that sometimes arise for legal purposes when some type of head injuries arise is if the occupant was wearing or not a helmet. The correlation of head injuries with the use of the helmet is a very important issue, therefore an important legal aspect. One of the key questions for the reconstructions that is difficult to analyze, is if the vehicle occupant, was or not, wearing the helmet. Based on the previously collected information, a generic model of a helmet was developed on CAD 3D, followed by its conversion into finite elements, all in order to perform impact tests using the Madymo software that would help improve the helmet- safety, but that also can be used as a tool in accident reconstruction.
Because of actual developments and the continuous increase in the field of drive assistant systems, representative and detailed investigations of accident databases are necessary. This lecture describes the possibility to estimate the potential of primary and secondary safety measures by means of a computerized case by case analysis. Single primary or secondary safety measures as well as a combination of both are presented. The method is exemplarily shown for the primary safety measure "Brake Assist" in pedestrian accidents. Regarding accident prevention only the primary safety measure is determined.
The fact that ADAC Air Rescue handles approximately 4,000 road accident missions every year gave rise to set up an accident research programme for which ADAC Air Rescue provides its data. This data is of initial informational quality and will be supplemented by data from the police, experts, fire brigades as well as hospitals and forensic institutes. Although the number of cases is still rather low, certain tendencies can be identified. The causes for most accidents occur when joining or intersecting traffic, followed by speeding in road bends and tailgating. Many accidents involve HGV rear end collisions, often causing serious injuries, considerable damage and technical problems for the rescue operations. With regard to the various impact types, it has become obvious that most of the extremely serious injuries are inflicted during a passenger car side impact. In addition, access to and removal of trapped passengers is becoming more and more complicated, partly due to the increasing use of high-strength materials, and rescue operations tend to be more time consuming.
Active safety systems are aimed at accident prevention, hence the knowledge required for their development is different from that required for passive safety systems aimed at injury prevention. Particularly, knowledge about accident causation is required. When looking at existing accident causation data, it is argued it fails to explain in sufficient detail how and why the accidents occur. Therefore, there is a need for detailed micro-level descriptions of accident causation mechanisms, and also of methodologies suitable for creating such descriptions. One study addressing these needs is the Swedish project FICA (Factors Influencing the Causation of Accidents and Incidents), where an accident investigation methodology suitable for active safety is developed, and in-depth accident investigations following this methodology are carried out on-scene in the area of Gothenburg by a multidisciplinary team. A preliminary aggregated analysis of different cases shows that the methodology developed is adequate for pointing out common contributing factors and devising principal countermeasures.
Crash involvement studies using routine accident and exposure data : a case for case-control designs
(2009)
Fortunately, accident involvement is a rare event: the chance of an individual road user trip to end up in a crash is close to zero. Thus, according to general epidemiological principles one can expect the case-control study design to be especially suitable for quantifying the relative risk (odds ratio) of accident involvement of road users with a certain risk factor as compared to road users that do not have this characteristic. Ideally, of course, the database for such a case-control study should be established by drawing two independent random samples of cases (accidental units) and controls (nonaccidental units), respectively. If, however, special data collection is not an option, it is nevertheless possible to analyze routine accident and exposure data under a case-control design in order to fully exploit the information contained in already existing databases. As a prerequisite, accident and exposure data from different sources are to be combined in a single file of micro or grouped data in a way consistent with the case-control study design. Among other things, the proposed methodological approach offers the possibility to use in-depth data of the GIDAS type also in investigations of active vehicle safety by combining this data with appropriate vehicle trip data collected in mobility surveys.
Within the COST Action TU1101 the working group WG 1 is dealing with acceptance criteria and problems in helmet use while bicycling concerning conspicuity, thermal stress, ventilation deficits and other potential confounding. To analyze the helmet usage practice of bicyclists in Europe a questionnaire was developed in the scope of working group 1 to collect relevant information by means of a field study. The questionnaire consists of some 66 questions covering the fields of personal data of the cyclist, riding und helmet usage habits, information concerning the helmet model and the sensation of the helmet, as well as information on previous bicycle accidents. A second complementary study is conducted to analyze if the use of a bicycle helmet influences the seating geometry and the posture of cyclists when riding a bicycle and if the if the helmet vertically limits the vision. For this purpose cyclists with and without helmets were photographed in real world situations and relevant geometrical values such as the decline of the torso, the head posture of the upper vertical vision limit due to the helmet were established from the photos. The interim results of the field studies which were conducted in Germany by the Hannover Medical School are presented in this study. Some 227 questionnaires were filled out, of which 67 participants had used a helmet and 42 of the 227 participants have had a bicycle accident before. For the analysis of the riding position and posture of the cyclist over 40 pictures of riders with a helmet and over 240 pictures of riders without a helmet were measured concerning the seating geometry to describe the influence of using a bicycle helmet. Some results in summary: From the riders interviewed with the questionnaire only 11% of the city bike riders and 12% of the mountain bike riders always used the helmet, while 38% of the racing bike riders and 88% of the e-bike-riders always used the helmet. The helmet use seems not to change the sensation of safety of cycling compared to the use of a car. The arguments for not wearing a helmet are mostly stated to be the short distance of a trip, high temperatures or carelessness and waste of time. The reasons for using a helmet are stated to be the feeling of safety and being used to using a helmet. Being a role model for others was also stated to be a reason for helmet use. Concerning the sensation of the helmet 9% of the riders reported problems with the field of vision when using a helmet, 57% saw the problem of sweating too much, and 10% reported headaches or other unpleasant symptoms like pressure on the forehead when using the helmet. The analysis of the seating posture from the pictures taken of cyclists revealed that older cyclists generally have a riding position where the handle bar is higher than the seat (0-° to 10-° incline from seat to handlebar), while younger riders had a higher variance (between -10-° decline and 20-° incline). Further, elderly riders and riders with helmets seem to have a more upright position of the upper body when cycling. The vertical vision limit due to the helmet is determined by the front rim of the helmet (mostly the sun shade). Typical values here range from 0-° (horizontal line from the eye to the sun shade) to 75-° upwards, in which elderly riders tend to have a slightly higher vertical vision limit possibly due to the helmet being worn more towards the face.
Das Unfallrisiko junger Fahrer - Bestandsaufnahme und Überlegungen zu wirksamen Gegenmaßnahmen
(2010)
Junge Fahrer - vor allem männlichen Geschlechts - haben ein überdurchschnittlich hohes Unfallrisiko. Der Straßenverkehrsunfall ist Todesursache Nummer eins für Jugendliche. Sie haben unter der Bevölkerung den größten Anteil an verlorenen Lebensjahren. Besonders gefährdet sind Motorradfahrer. An Wochenenden und nachts ist die Unfallwahrscheinlichkeit und -häufigkeit extrem. Auch in Ländern, die hohe Anstrengungen unternehmen, um die Sicherheit im Straßenverkehr zu erhöhen und insgesamt erfolgreich sind, zeigt sich, dass die 18- bis 24-Jährigen häufiger verunfallen als die übrigen Verkehrsteilnehmer und schwerere Folgen davontragen. Die jugendliche Persönlichkeit hat einen prädominanten Einfluss auf das Fahrverhalten. Hintergründe dafür sind die hohe Risikobereitschaft, das Spannungs- und Reizbedürfnis, der Wunsch, Grenzen auszuloten sowie Gruppeneinflüsse oder Renommierverhalten. Daneben spielt allerdings auch die geringe Erfahrung eine Rolle, die zu dreierlei Problemen führen kann: - Neulenker sehen oft die Gefahr nicht, in welcher sie sich befinden, oder - sie unterschätzen die wahrgenommene Gefahr,oder - sie ueberschätzen ihre Fahrkunst und glauben, die Gefahr meistern zu können. In den letzten Jahren wurden in verschiedenen Ländern jedoch auch Fortschritte erzielt. Empfehlenswerte Maßnahmen ergeben sich bei der Ausbildung, wo neue Methoden angewandt werden, eine zweite Phase eingeführt wurde, spezielle Kampagnen konzipiert werden oder fahrzeugtechnische Modifikationen veranlasst wurden. Auch die Nachschulung für junge Lenker, wo nötig, zeitigt Wirkung. Weitere Anstrengungen sind je nach Land oder Region notwendig, insbesondere hinsichtlich der Hauptursachen für schwere Unfälle: Geschwindigkeit, Alkohol und Nicht-Anlegen des Sicherheitsgurtes. Hier lassen sich besondere Maßnahmen für Neulenker vorsehen. Daneben müssen gesellschaftliche Einflüsse, etwa die Wirkung der Automobilwerbung und -berichterstattung auf Jugendliche, berücksichtigt werden.
The need of passive safety devices, able to reduce the accidents and the severity of injuries suffered by motorcyclist, distinctly arises from data on accident statistics. In this paper, the effectiveness of an airbag device fitted in the biker- garments has been verified through various numerical simulations. Two simple test conditions were defined, in order to investigate the performance of the device both for back and front impacts, and simulated at various impact speeds. With the aim of providing more information about the actual capability of the airbag to reduce the severity of the injuries, one of accident scenario described by ISO 13232:2005 has been also investigated, checking the real effectiveness of the airbag strap-based firing system too. Confrontation of injury indexes resulting from simulation with and without airbag made possible a realistic evaluation of the harm reduction induced by the airbag presence.
Detailed investigations and reconstructions of real accidents involving vulnerable road users
(2005)
The aim of this research is to improve knowledge about vulnerable road users accidents and more specifically pedestrians or cyclists. This work has been based on a complete analysis of real accidents. From accidents chosen from an in-depth multidisciplinary investigation (psychology, technical, medical), we have tried to identify the configuration of the impact: car speed, pedestrian or cyclist orientations. Then, we have made a numerical modelling of the same configuration with a multibody software. In particular, we have reproduced the anthropometry of the victim and the front shape of the car. A first simulation has been performed on this starting configuration. Next, effects of some parameters such as car velocity or victim position at impact have been numerically studied in order to find the best correlations with all indications produced by the in-depth analysis. Finally, the retained configuration was close to the presumed real accident conditions because it reproduces in particular the same impact points on the car, the same injuries, and is according to the driver statement. This double approach associating an in-depth accident analysis and a numerical simulation has been applied on pedestrian-to-car and bicyclist-tocar accidents. It has allowed us to better understand the real kinematics of such impacts. Even if this method is based on a case to case study, it underlines which parameters are relevant on a vulnerable road user accident investigation and reconstruction.
The SafetyNet project was formulated in part to address the need for safety oriented European road accident data. One of the main tasks included within the project was the development of a methodology for better understanding of accident causation together with the development of an associated database involving data obtained from on-scene or "nearly onscene" accident investigations. Information from these investigations was complemented by data from follow-up interviews with crash participants to determine critical events and contributory factors to the accident occurrence. A method for classification of accident contributing factors, known as DREAM 3.0, was developed and tested in conjunction with the SafetyNet activities. Collection of data and case analysis for some 1 000 individual crashes have recently been completed and inserted into the database and therefore aggregation analyses of the data are now being undertaken. This paper describes the methodology development, an overview of the database and the initial aggregation analyses.