Sonstige
Filtern
Erscheinungsjahr
- 2013 (80) (entfernen)
Dokumenttyp
- Konferenzveröffentlichung (46)
- Buch (Monographie) (32)
- Bericht (2)
Volltext vorhanden
- ja (80) (entfernen)
Schlagworte
- Deutschland (70)
- Germany (69)
- Konferenz (41)
- Conference (40)
- Research report (27)
- Forschungsbericht (26)
- Reconstruction (accid) (20)
- Unfallrekonstruktion (20)
- Injury (16)
- Verletzung (16)
- Accident (14)
- On the spot accident investigation (14)
- Unfall (14)
- Untersuchung am Unfallort (14)
- Bewertung (13)
- Evaluation (assessment) (13)
- Method (13)
- Safety (13)
- Schweregrad (Unfall (13)
- Sicherheit (13)
- Simulation (13)
- Verfahren (13)
- injury) (13)
- Prüfverfahren (12)
- Severity (accid (12)
- Verletzung) (12)
- Test method (11)
- Berechnung (10)
- Calculation (10)
- Fatality (9)
- Measurement (9)
- Messung (9)
- Test (9)
- Tödlicher Unfall (9)
- Versuch (9)
- Anfahrversuch (8)
- Statistics (8)
- Statistik (8)
- Behaviour (7)
- Database (7)
- Datenbank (7)
- Driver (7)
- Fahranfänger (7)
- Fahrer (7)
- Impact test (veh) (7)
- Improvement (7)
- Recently qualified driver (7)
- Verbesserung (7)
- Verhalten (7)
- Aktives Sicherheitssystem (6)
- Collision (6)
- Driver assistance system (6)
- Europa (6)
- Europe (6)
- Fahrerassistenzsystem (6)
- Pedestrian (6)
- Verkehrsstärke (6)
- Zusammenstoß (6)
- Active safety system (5)
- Analyse (Math) (5)
- Analysis (math) (5)
- Fahrgeschicklichkeit (5)
- Fahrzeug (5)
- Fußgänger (5)
- Insasse (5)
- Norm (tech) (5)
- Passives Sicherheitssystem (5)
- Prognose (5)
- Risiko (5)
- Risk (5)
- Skill (road user) (5)
- Traffic concentration (5)
- Vehicle (5)
- Vehicle occupant (5)
- Accompanied driving (4)
- Automatisch (4)
- Begleitetes Fahren (4)
- Bemessung (4)
- Bremse (4)
- Cyclist (4)
- Development (4)
- Driver training (4)
- Efficiency (4)
- Entwicklung (4)
- Fahrausbildung (4)
- Forecast (4)
- Interview (4)
- Model (not math) (4)
- Modell (4)
- Motorcycle (4)
- Motorcyclist (4)
- Motorrad (4)
- Motorradfahrer (4)
- Passive safety system (4)
- Radfahrer (4)
- Richtlinien (4)
- Specification (standard) (4)
- Specifications (4)
- Traffic (4)
- Traffic count (4)
- Vehicle regulations (4)
- Verkehr (4)
- Verkehrserhebung (4)
- Accident prevention (3)
- Adolescent (3)
- Alte Leute (3)
- Belastung (3)
- Benutzung (3)
- Bewehrung (3)
- Bicycle (3)
- Brake (3)
- Bridge (3)
- Brücke (3)
- Cause (3)
- Child (3)
- Coefficient of friction (3)
- Design (overall design) (3)
- Driving test (3)
- Error (3)
- Fahrprüfung (3)
- Fahrrad (3)
- Fehler (3)
- Führerschein (3)
- Griffigkeit (3)
- Head (3)
- International (3)
- JDTV (3)
- Jugendlicher (3)
- Kind (3)
- Kopf (3)
- Leistungsfähigkeit (allg) (3)
- Load (3)
- Mathematical model (3)
- Modification (3)
- Old people (3)
- Quality assurance (3)
- Qualitätssicherung (3)
- Rechenmodell (3)
- Reibungsbeiwert (3)
- Reinforcement (in mater) (3)
- Risikobewertung (3)
- Risk assessment (3)
- Skidding resistance (3)
- Technische Vorschriften (Kraftfahrzeug) (3)
- Technologie (3)
- Technology (3)
- Unfallverhütung (3)
- Ursache (3)
- Veränderung (3)
- Accident rate (2)
- Age (2)
- Alter (2)
- Annual average daily traffic (2)
- Antikollisionssystem (2)
- Approximation (2)
- Auffahrunfall (2)
- Autobahn (2)
- Automatic (2)
- Bitumen (2)
- Bituminous mixture (2)
- Bituminöses Mischgut (2)
- Brand (2)
- CEN (2)
- Car (2)
- China (2)
- Cost (2)
- Driving (veh) (2)
- Driving licence (2)
- EU (2)
- Education (2)
- Eins (2)
- Erziehung (2)
- Experience (human) (2)
- Fahrererfahrung (2)
- Fahrstreifen (2)
- Fahrzeugführung (2)
- Fatigue (human) (2)
- Fernverkehrsstraße (2)
- Fire (2)
- Freeway (2)
- Front (2)
- Führerschein Punktesystem (2)
- Highway (2)
- Hospital (2)
- Immission (2)
- India (2)
- Indien (2)
- Interior (veh) (2)
- Kosten (2)
- Krankenhaus (2)
- LKW (2)
- Landstraße (2)
- Lorry (2)
- Main road (2)
- Müdigkeit (2)
- Näherung (math) (2)
- Oberflächentextur (2)
- One (2)
- Overturning (veh) (2)
- PKW (2)
- Planning (2)
- Planung (2)
- Point demerit system (2)
- Pollution concentration (2)
- Prevention (2)
- Provisorisch (2)
- Public transport (2)
- Reaction (human) (2)
- Reaktionsverhalten (2)
- School (2)
- Schule (2)
- Schutz (2)
- Stadt (2)
- Stochastic process (2)
- Straße (2)
- Surface texture (2)
- Systemanalyse (2)
- Systems analysis (2)
- Temporary (2)
- Time (2)
- Traffic control (2)
- Traffic density (2)
- Traffic lane (2)
- Transport infrastructure (2)
- Unfallhäufigkeit (2)
- United kingdom (2)
- Urban area (2)
- Use (2)
- Vereinigtes Königreich (2)
- Verkehrsinfrastruktur (2)
- Verkehrssteuerung (2)
- Vorn (2)
- Wirbelsäule (2)
- Zeit (2)
- Öffentlicher Verkehr (2)
- Überschlagen (2)
- AADT (1)
- Abkommen von der Fahrbahn (Unfall) (1)
- Abnutzung (1)
- Abplatzen (1)
- Acceleration (1)
- Achse (math) (1)
- Achslast (1)
- Active safety system; Automatic; Brake; Car; Collision avoidance system; Conference; Driver assistance system; Germany; Impact test (veh); Rear end collision; Severity (accid (1)
- Adult (1)
- Ageing (1)
- Aggregate (1)
- Air pollution (1)
- Alignment (1)
- Alterung (mater) (1)
- Anthropometric dummy (1)
- Antrieb (tech) (1)
- Apparatus (measuring) (1)
- Area traffic control (1)
- Audit (1)
- Aufbereitungsanlage (1)
- Auflager (Brücke) (1)
- Aufprallschlitten (1)
- Augenbewegungen (1)
- Ausführungsfehler (1)
- Automation (1)
- Axis (1)
- Axle load (1)
- Balken (1)
- Baustelle (1)
- Beam (1)
- Bearing (bridge) (1)
- Bearing capacity (1)
- Before and after study (1)
- Befreiung (Bergung) (1)
- Beschleunigung (1)
- Betriebsablauf (Transport) (1)
- Bindemittel (1)
- Binder (1)
- Blasting (1)
- Boden (1)
- Bottleneck (1)
- Braking (1)
- Breite (1)
- Bremsung (1)
- Bridge deck (1)
- Bruch (mech) (1)
- Brustkorb (1)
- Brückenüberbau (1)
- Cantilever (1)
- Carriageway (1)
- Carriageway marking (1)
- Classification (1)
- Clothing (1)
- Collision avoidance system (1)
- Communication (1)
- Compatibility (1)
- Components of the vehicle (1)
- Conference; Germany; Injury; Medical examination; Spinal column; X ray (1)
- Construction site (1)
- Contact (tyre road) (1)
- Cost benefit analysis (1)
- Cracking (1)
- Crash helmet (1)
- Cross section (1)
- Cut and cover (1)
- Cycle track (1)
- Czech Republic (1)
- Damage (1)
- Damping (1)
- Data acquisition (1)
- Data exchange (1)
- Datenaustausch (1)
- Datenerfassung (1)
- Dauerhaftigkeit (1)
- Decision process (1)
- Defect (tech) (1)
- Deflection (1)
- Deformable barrier (impact test) (1)
- Deformation (1)
- Deformierbare Barriere (Anpralltest) (1)
- Depth (1)
- Design (1)
- Detection (1)
- Detektion (1)
- Digital model (1)
- Digitale Bildverarbeitung (1)
- Distribution (gen) (1)
- Dreidimensional (1)
- Driving aptitude (1)
- Driving license (1)
- Druck (1)
- Drunkenness (1)
- Ductility (1)
- Duktilität (1)
- Durability (1)
- Durchbiegung (1)
- Dynamic penetration test (1)
- Dämpfung (1)
- EU directive (1)
- EU-Richtlinie (1)
- Eigenschaft (1)
- Einkommensschwache Schichten (1)
- Electricity (1)
- Electronics (1)
- Elektrizität (1)
- Elektrofahrzeug (1)
- Elektronik (1)
- Emission (1)
- Emission control (1)
- Emissionskontrolle (1)
- Emulsion (1)
- Engpass (1)
- Entscheidungsprozess (1)
- Environment protection (1)
- Ergonomics (1)
- Ergonomie (1)
- Erste Hilfe (1)
- Erwachsener (1)
- Eu (1)
- Explosion (1)
- Extrication (1)
- Eye movement (1)
- Fahrbahn (1)
- Fahrbahnmarkierung (1)
- Fahrbahntafel (1)
- Fahrernachschulung (1)
- Fahrleistung (1)
- Fahrtauglichkeit (1)
- Fahrzeugdach (1)
- Fahrzeuginnenraum (1)
- Fahrzeugsitz (1)
- Fahrzeugteile (1)
- Failure (1)
- Faserbeton (1)
- Festigkeit (1)
- Festzeitsteuerung (Lichtsignal) (1)
- Fiber reinforced concrete (1)
- Finite element method (1)
- First aid (1)
- Fixed time (signals) (1)
- Force (1)
- Forschungsarbeit (1)
- Frontalzusammenstoß (1)
- Fussgänger (1)
- Gefahrenabwehr (1)
- Gemeindeverwaltung (1)
- Geografisches Information System (1)
- Geographical information system (1)
- Geschwindigkeit (1)
- Gesetzesübertretung (1)
- Gesetzgebung (1)
- Gestaltung (1)
- Gesundheit (1)
- Grenzwert (1)
- Head on collision (1)
- Health (1)
- Highway design (1)
- Hinten (1)
- Human factor (1)
- Hybrid vehicle (1)
- Hybridfahrzeug (1)
- Image processing (1)
- Impact sled (1)
- Impact study (1)
- In Bewegung (1)
- Information (1)
- Information documentation (1)
- Installation (1)
- Intelligent transport system (1)
- Intelligentes Transportsystem (1)
- Interoperability (1)
- Interoperabilität (1)
- Jahr (1)
- Japan (1)
- Journey to school (1)
- Klassifizierung (1)
- Kleidung (1)
- Kommunikation (1)
- Kompatibilität (1)
- Kontakt Reifen Straße (1)
- Korn (1)
- Kraft (1)
- Kragarm (1)
- Kunststoff (1)
- Layout (1)
- Legislation (1)
- Leistungsfähigkeit (Allg.) (1)
- Lichtsignal (1)
- Limit (1)
- Linienführung (1)
- Local authority (1)
- Low income (1)
- Luftverunreinigung (1)
- Matrix (1)
- Medizinische Untersuchung (1)
- Menschlicher Faktor (1)
- Messgerät (1)
- Methode der Finiten Elemente (1)
- Mixing plant (1)
- Mobility management (1)
- Mobilitätsmanagement (1)
- Montage (1)
- Moving (1)
- Nasse Strasse (1)
- Numerisches Modell (1)
- Nutzwertanalyse (1)
- Offence (1)
- Offene Bauweise (1)
- Operations (Transp network) (1)
- Optics (1)
- Optik (1)
- Organisation (1)
- Organization (association) (1)
- Particle (1)
- Partnerschaft (1)
- Partnership (1)
- Perception (1)
- Pkw (1)
- Plastic material (1)
- Platte (1)
- Policy (1)
- Politik (1)
- Pollutant (1)
- Polymerisierung (1)
- Polymerization (1)
- Portable (1)
- Portugal (1)
- Pressure (1)
- Probability (1)
- Probe (1)
- Properties (1)
- Propulsion (1)
- Prototyp (1)
- Prototype (1)
- Quality (1)
- Quality management system (1)
- Qualität (1)
- Qualitätsmanagementsystem (1)
- Querschnitt (1)
- Radweg (1)
- Rail bound transport (1)
- Rail traffic (1)
- Rammsondierung (1)
- Rear (1)
- Rear end collision (1)
- Recidivist (1)
- Recycling (1)
- Recycling (mater) (1)
- Reflectorized material (1)
- Reflexstoffe (1)
- Regression analysis (1)
- Regressionsanalyse (1)
- Rehabilitation (1)
- Rehabilitation (road user) (1)
- Reinforced concrete (1)
- Reproducibility (1)
- Reproduzierbarkeit (1)
- Research project (1)
- Residential area (1)
- Retraining of drivers (1)
- Rissbildung (1)
- Road network (1)
- Road traffic (1)
- Road transport (1)
- Road user (1)
- Roof (veh) (1)
- Run off the road (accid) (1)
- Rural highway (1)
- Rural road (1)
- Röntgenstrahlung (1)
- Rückfalltäter (1)
- Sachschaden (1)
- Safety coefficient (1)
- Safety glass (1)
- Sample (mater) (1)
- Sample (stat) (1)
- Schadstoff (1)
- Schienentransport (1)
- Schienenverkehr (1)
- Schlag (1)
- Schub (1)
- Schulweg (1)
- Schutzhelm (1)
- Schweiz (1)
- Schwinden (1)
- Sealing coat (on top of the surfacing) (1)
- Seat (veh) (1)
- Security (1)
- Seitlicher Zusammenstoß (1)
- Shear (1)
- Shock (1)
- Shrinkage (1)
- Sicherheitsbeiwert (1)
- Sicherheitsglas (1)
- Side impact (1)
- Slab (1)
- Sociology (1)
- Soil (1)
- Soziologie (1)
- Spalling (1)
- Specification (Standard) (1)
- Speed (1)
- Spinal column (1)
- Stadtplanung (1)
- Stahlbeton (1)
- Standardisierung (1)
- Standardization (1)
- Stated preference (1)
- Stichprobe (1)
- Stochastisch (1)
- Stochastischer Prozess (1)
- Straßenentwurf (1)
- Straßennetz (1)
- Straßentransport (1)
- Straßenverkehr (1)
- Strength (mater) (1)
- Superstructure (bridge) (1)
- Switzerland (1)
- T Träger (1)
- T beam (1)
- Technische Vorschriften (1)
- Technische Überwachung (Fahrzeug) (1)
- Telematics (1)
- Telematik (1)
- Temperatur (1)
- Temperature (1)
- Test procedure (1)
- Thermoplast (1)
- Thermoplastic (1)
- Thorax (1)
- Three dimensional (1)
- Tiefe (1)
- Town planning (1)
- Traffic composition (1)
- Traffic engineering (1)
- Traffic signal (1)
- Tragbar (1)
- Tragfähigkeit (1)
- Transport operator (1)
- Transportunternehmen (1)
- Trunkenheit (1)
- Tschechische Republik (1)
- Tunnel (1)
- USA (1)
- Umweltschutz (1)
- Usa (1)
- Value analysis (1)
- Vehicle actuated (1)
- Vehicle inspection (1)
- Vehicle mile (1)
- Veletzung) (1)
- Verarbeitbarkeit (1)
- Verformung (1)
- Verkehrsabhängig (1)
- Verkehrsstaerke (1)
- Verkehrstechnik (1)
- Verkehrsteilnehmer (1)
- Verkehrszusammensetzung (1)
- Verminderung (1)
- Versiegelung (1)
- Versuchspuppe (1)
- Verteilung (allg) (1)
- Viscosity (1)
- Viskosität (1)
- Visualisation (1)
- Visualisierung (1)
- Vorher Nachher Untersuchung (1)
- Wahrnehmung (1)
- Wahrscheinlichkeit (1)
- Wasser (1)
- Water (1)
- Wear (1)
- Wet road (1)
- Width (1)
- Windschutzscheibe (1)
- Windscreen (veh) (1)
- Wirksamkeitsuntersuchung (1)
- Wirtschaftlichkeitsrechnung (1)
- Wohngebiet (1)
- Workability (1)
- Year (1)
- Zentrale Verkehrssteuerung (1)
- Zuschlagstoff (1)
Institut
Im Hinblick auf das Lösen werden Boden und Fels nach DIN 18300 beschrieben. Dabei werden bindige Bodenarten in Abhängigkeit von ihrer Konsistenz in unterschiedliche Bodenklassen unterteilt. Bodenarten von leichter bis mittlerer Plastizität und weicher bis halbfester Konsistenz werden der Bodenklasse 4 zugeordnet. Ausgeprägt plastische Tone von weicher bis halbfester Konsistenz gehören der Bodenklasse 5 an. Bodenarten von fester Konsistenz sind der Bodenklasse 6 zuzuordnen. Die Grenze zwischen halbfester und fester Konsistenz ist dabei über die Schrumpfgrenze definiert, die nach DIN 18122-2 bestimmt wird. Da vor allem bei leichtplastischen Böden der Wassergehalt an der Schrumpfgrenze häufig oberhalb des Wassergehaltes an der Ausrollgrenze liegt, kommt es bei der Einordnung bindiger Böden in die Bodenklassen der DIN 18300 häufig zu Unklarheiten, was zu Streitfällen zwischen Auftragnehmer und Auftraggeber führen kann. Das Ziel des Forschungsvorhabens war es deshalb, ein geeigneteres Kriterium zur Einordnung halbfester und fester Böden in die Bodenklassen der DIN 18300 zu erarbeiten und dazu eine Versuchstechnik zu entwickeln. In einem ersten Schritt wurde das Schrumpfverhalten bindiger Böden analysiert und die Versuchstechnik zur Bestimmung der Schrumpfgrenze untersucht. Es hat sich gezeigt, dass bei Böden mit einer Plastizitätszahl IP < 18 % der Wassergehalt an der Schrumpfgrenze in der Regel oberhalb des Wassergehalts an der Ausrollgrenze liegt. Anhand von Untersuchungen zum Schrumpfverhalten an Proben, die bei unterschiedlichen Spannungen vorbelastet worden waren, wurde ausserdem festgestellt, dass der Wassergehalt an der Schrumpfgrenze mit zunehmender Vorbelastung abnimmt. Diese Untersuchungen haben damit bestätigt, dass anhand der nach DIN 18122-2 ermittelten Schrumpfgrenze keine eindeutige Zuordnung in die Bodenklassen 4 und 6 bzw. 5 und 6 möglich ist. Deshalb wurden im Folgenden Untersuchungen zu anderen Kriterien zur Unterscheidung zwischen halbfesten und festen Böden durchgeführt. Hierzu wurden zunächst Untersuchungen zur einaxialen Druckfestigkeit durchgeführt. Da das Herausarbeiten von ungestörten Probekörpern im relevanten Konsistenzbereich aber mit großen Schwierigkeiten verbunden ist, kann die Verwendung der einaxialen Druckfestigkeit zur Einordnung der Bodenklassen nicht empfohlen werden. Im Rahmen des Forschungsvorhabens wurden daher im weiteren Verlauf Untersuchungen zu einem einfach durchzuführenden Versuch durchgeführt, der eine Unterscheidung von halbfestem und festem Boden auf Grundlage der Festigkeit ermöglicht. Dazu wurden an aufbereiteten Böden Eindringversuche mit einer Proctornadel und einer Konusspitze durchgeführt. Die Versuchsergebnisse belegen, dass ein klarer Zusammenhang zwischen der Konsistenz und dem Eindringwiderstand besteht und dass eine Bewertung der Festigkeit mit Hilfe dieser Versuche prinzipiell möglich ist. Zur Festlegung konkreter Werte für eine Unterscheidung der Bodenklassen 4, 5 und 6 gemäß DIN 18300 sind jedoch weitere Untersuchungen erforderlich.
10 % bis 20 % der Straßenverkehrsunfälle werden auf Müdigkeit am Steuer zurückgeführt. Es steht eine Vielzahl unterschiedlicher Methoden zur Verfügung, um Müdigkeit beim Fahrer zu erkennen. Ziel des vorliegenden Projekts war es, die Stärken und Schwächen der verschiedenen Müdigkeitsmessverfahren vergleichend zu beschreiben und existierende Müdigkeitsmess- und Müdigkeitswarnsysteme im Überblick darzustellen. Die Ergebnisse beruhen auf folgender Verknüpfung von Literaturanalysen, Experten- und Nutzerbefragungen: • Literaturanalyse und zusammenfassende Darstellung von Müdigkeitsmessverfahren, die auf physiologischen und leistungsbezogenen Messgrößen beruhen. • Literaturanalyse zu Müdigkeitsmess- und Warnsystemen, Befragung der Systemhersteller und zusammenfassende Darstellung der identifizierten Systeme. • Befragung von 20 Nutzern von den in Mittel- und Oberklassefahrzeugen implementierten Müdigkeitswarnsystemen zur Beurteilung der wahrgenommenen Detektionsgüte, Akzeptanz und Compliance. • Erarbeitung eines Gütekriterienkatalogs als Grundlage für die Bewertung und den Vergleich ausgewählter Müdigkeitsmessverfahren. • Zweistufige Befragung von 12 Experten aus Industrie- und Hochschulforschung nach der Delphi-Methode. Ziel war die Auswahl und Bewertung der validesten Verfahren zur Erfassung der Fahrermüdigkeit, begründeter Zweitbewertungen bei abweichenden Urteilen und der Beurteilung ihrer Eignung für verschiedene Einsatzgebiete. • Workshop mit den Delphi-Teilnehmern zur Diskussion und Ergänzung der Delphi-Ergebnisse. Die 70 in der Fachliteratur identifizierten Müdigkeitsmesssysteme unterscheiden sich in den zugrunde liegenden Müdigkeitsmessverfahren, dem Vorliegen und der Gestaltung von Warnfunktionen und ihrer Verbreitung. Nur selten werden überzeugende Validierungsbelege oder Angaben zur Anzahl falscher und ausbleibender Alarme angeführt. Aus Nutzersicht bieten die derzeit in Mittel- und Oberklassemodellen verfügbaren Müdigkeitswarnsysteme oftmals keine zufriedenstellende Detektionsgüte. Vielfach wird die Fahrt trotz detektierter und selbst eingestandener Müdigkeit fortgesetzt. Ca. die Hälfte der Fahrer sieht in der Nutzung der Müdigkeitswarnsysteme einen Zuwachs an Sicherheit. Zu den validesten Müdigkeitsmessverfahren gehören aus Expertensicht die Erfassung der Fahrperformanz (Lenkverhalten und Spurhaltung) und des Lidschlussverhaltens, das videobasierte Expertenrating, das EEG und der Pupillografische Schläfrigkeitstest. Die unterschiedlichen Stärken und Schwächen der sechs ausgewählten Messverfahren werden im Bericht detailliert aufgeführt. Nach wie vor existiert kein Goldstandard zur Müdigkeitserfassung. Je nach Einsatzgebiet sind entweder alle sechs ausgewählten Messverfahren (Forschung & Entwicklung), nur einige (Müdigkeitswarnsystem im Fahrzeug) oder kein einziges (Verkehrskontrolle) geeignet. Die Auswahl der Messverfahren sollte daher in Abhängigkeit des jeweiligen Ziels und Kontexts der Müdigkeitserfassung erfolgen und die spezifischen Stärke-Schwächenprofile berücksichtigen. Eine valide Müdigkeitserfassung bedarf der Kombination von mindestens zwei Messverfahren. Bedarf besteht in der Optimierung und der begleitenden Evaluierung der Müdigkeitswarnsysteme im Fahrzeug und der vielversprechendsten Messverfahren. Weitere Maßnahmen zur wirksamen Reduzierung müdigkeitsbedingter Unfälle wurden im Rahmen des Expertenworkshops diskutiert und im Bericht dargelegt.
Although the number of road accident casualties in Europe (EU27) is falling the problem still remains substantial. In 2011 there were still over 30,000 road accident fatalities. Approximately half of these were car occupants and about 60 percent of these occurred in frontal impacts. The next stage to improve a car's safety performance in frontal impacts is to improve its compatibility. The objective of the FIMCAR FP7 EU-project was to develop an assessment approach suitable for regulatory application to control a car's frontal impact and compatibility crash performance and perform an associated cost benefit analysis for its implementation. This paper reports the cost benefit analyses performed to estimate the effect of the following potential changes to the frontal impact regulation: • Option 1 " No change and allow current measures to propagate throughout the vehicle fleet. • Option 2 " Add a full width test to the current offset Deformable Barrier (ODB) test. • Option 3 " Add a full width test and replace the current ODB test with a Progressive Deformable Barrier (PDB) test. For the analyses national data were used from Great Britain (STATS 19) and from Germany (German Federal Statistical Office). In addition in-depth real word crash data were used from CCIS (Great Britain) and GIDAS (Germany). To estimate the benefit a generalised linear model, an injury reduction model and a matched pairs modelling approach were applied. The benefits were estimated to be: for Option 1 "No change" about 2.0%; for Option 2 "FW test" ranging from 5 to 12% and for Option 3 "FW and PDB tests" 9 to 14% of car occupant killed and seriously injured casualties.
This paper will outline ETSC's contribution to the European Union's road safety policy 2011-2020. It will present some of the main recommendations from ETSC's Blueprint for the 4th Road Safety Action Programme and will introduce the response to the European Commission's Road Safety Policy Orientations 2011-2020 (published July 2010). The second framework document presented is the Transport White Paper (published March 2011). The paper will focus on new targets and the new vision set for Europe's Road Safety policy picking out some issues in particular such as traffic law enforcement and the protection of vulnerable road users. It will argue that by reinforcing the current Road Safety Policy Orientations, the EU will be better placed to reach its new ambitious goal of halving road deaths by 2020 and the longer term zero casualty vision.
Fahranfänger werden im Rahmen spezifischer, international unterschiedlich ausgestalteter Vorbereitungssysteme auf die motorisierte Verkehrsteilnahme vorbereitet. Diese Systeme sind historisch gewachsen und von länderspezifischen ökonomischen, infrastrukturellen, rechtlichen und kulturellen Gegebenheiten geprägt. Für eine vergleichende Systembetrachtung wurde unter Rückgriff auf forschungsmethodische Ansätze der Vergleichenden Politikwissenschaft und lehr-lerntheoretische Grundlagen ein begrifflicher Rahmen erarbeitet, der eine Systembeschreibung und -analyse anhand funktional unterscheidbarer Lehr-Lernformen und Prüfungsformen ermöglicht. Im Bericht werden die Systeme der Fahranfängervorbereitung von 44 Ländern dargestellt. Die Beschreibungen basieren auf Befragungen von Experten verschiedener Institutionen (Verkehrsministerien, Fahrlehrerverbände, Prüforganisationen) sowie auf Literatur- und Internetrecherchen. Bei der Länderauswahl wurden " neben europäischen Ländern mit einer traditionell stark ausgeprägten formalen Fahrschulausbildung " auch "Graduated Driver Licensing"-Systeme berücksichtigt, die vor allem in der englischsprachigen Welt in Übersee anzutreffen sind. Sie sind durch die Gewährleistung eines umfangreichen Fahrerfahrungsaufbaus unter niedrigen Risikobedingungen durch Begleitetes Fahren ("supervised driving") vor dem Beginn des selbständigen Fahrens und protektive Sonderregelungen für Fahranfänger beim weiteren Fahrerfahrungsaufbau in der Anfangsphase des selbständigen Fahrens gekennzeichnet. Die Ergebnisse ermöglichen einen detaillierten Einblick in die länderspezifische Ausgestaltung der Fahranfängervorbereitung mit den Bestandteilen der formalen Fahrausbildung in Fahrschulen, informeller Lehr-Lernformen wie des Begleiteten Fahrenlernens, zu absolvierender Fahrerlaubnisprüfungen sowie rechtlicher Rahmenbedingungen und qualitätssichernder Maßnahmen. Vor dem Hintergrund von Evaluationsbefunden zur Sicherheitswirksamkeit wird die Funktionalität von Systembestandteilen und -architekturen diskutiert.
Im gegenstädlichen Forschungsbericht werden zunächst die Grundlagen der geothermischen Energienutzung beschrieben. Dies beinhaltet Anforderungen an den Energienutzer, Einflüsse aus den vorhandenen Untergrund- und Grundwasserverhältnissen sowie dem Fundierungskonzept des Bauwerkes bzw. dessen Bauwerksstruktur. Weiters werden die derzeit vorhandenen Absorbersysteme sowie deren Betriebsweisen beschrieben. Für die Planung einer Tunnelthermie-Anlage wurde ein Planungsleitfaden erstellt, der zunächst die wesentlichen Einflussfaktoren für eine technisch-wirtschaftliche Planung einer Erdwärmeanlage sowie deren Betrieb, Ausfallrisiken und einen Überblick über die rechtlichen Rahmenbedingungen enthält. Der Planungsleitfaden beinhaltet schließlich auch eine Beschreibung der einzelnen Projektstufen, die im Zuge der Planung und Umsetzung einer Tunnelthermie-Anlage zu absolvieren sind. Weiters wurde eine Planungssystematik erarbeitet, die die Angabe wesentlicher Entwurfskriterien beinhaltet, die im Zuge der Planung einer Tunnelthermie-Anlage zu beachten sind. Für die Dimensionierung einer Tunnelthermie-Anlage bedarf es diverser Parameter, die im Vorfeld zu erkunden sind. Diese werden diskutiert und es werden Empfehlungen zur thermischen Erkundung in Kombination mit üblichen geotechnischen Aufschlüssen angeführt. Technische Detaillösungen wurden für beispielhafte Tunnelthermie-Anlagen entwickelt, beschrieben und dargestellt. Darauf aufbauend wurde der Einsatz der Massivabsorbertechnologie bei üblichen deutschen Straßentunneln untersucht. Für die Gestaltung eines Bauvertrages im Zuge der Ausschreibung einer Tunnelthermie-Anlage wurden Empfehlungen erarbeitet. Weiters wird die Schnittstelle zwischen der Erdwärmeanlage und der Haustechnik sowie zwischen dem geothermischen Fachplaner des Auftraggebers und jenem des Auftragnehmers definiert. Abschließend wurden beispielhafte Leistungspositionen für Tunnelthermie-Anlagen erstellt.
Rollovers continue to be a major source of heavy truck fatalities when compared to other accident modes. Real world rollover accidents are analyzed and two distinct damage patterns are identified. Damage to heavy truck roofs can occur from lateral loading that transitions to vertical roof loading as the vehicle rolls onto its side and then over onto its roof. A second load path can occur when the vehicle has rolled onto its side and furrows into the ground generating large longitudinal friction forces between the roof and ground. A review of the previous literature and various test methodologies are presented. A sled impact test methodology is presented which allows for structural assessment of a heavy truck cab's crashworthiness in both of these loading environments. Two test series are presented using the sled impact test methodology in order to analyze real world truck rollovers using varying impact platen and contact angles. The structural deformation and failure patterns were found to be consistent with damage seen in real world accident vehicles. In each case, a second equivalent truck cab was then reinforced and tested under similar conditions to evaluate the energy management and crush resistance of a stronger cab structure. These structural reinforcements demonstrated a substantial reduction in roof crush and protected the survival space of the occupant compartment. The sled impact test procedure is an effective method for testing the structural performance of a heavy truck cab in a variety of loading scenarios comparable to real world accidents and ascertaining the load and energy load levels in these accident modes.
The misuse of CRS (child restraint system) is one of the most urgent problems in connection of child safety in cars. Numerous field studies show that more than two thirds of all CRS are used in a wrong way. This misuse could lead to serious injuries for the children. Surprisingly the quality of CRS use is coded much better in accident data (e.g. GIDAS) than the results of observatory field studies show. It is expected that misuse of CRS was not detected by the accident teams in a large number of the cases. An essential part in improving child seats and their usability is the knowledge of the relation between misuse and resulting injuries. For that the analysis and experimental reconstruction of accidents is an important part. For allowing an exact experimental accident reconstruction, it is necessary to have detailed information about the securing situation of the child and about the installation of the CRS in the car.
The increasing economics in India has an enormous growth of its road traffic. As observed from official Indian accident statistics the number of road fatalities are one of the highest worldwide. In contrast to most industrialized nations they have an rapidly increasing trend. To come along with this trend it becomes more than essential to understand the traffic accident situation. The official Indian accident statistics gives a glimpse of only basic information. Therefore more detailed data is needed. By using In-depth accident data and officially representative statistics the current accident situation can be evaluated in India, if a suitable weighting methodology is considered. Hence in 2009/2010 a pilot study with the collaboration partner JP-Research India pvt. Ldt. was gathered in Tamil Nadu in south of India. In-depth accident investigations were done around the Coimbatore area on four highways. At first, the collected data is evaluated. Due to consequent and continuous further development based on the first approach a methodology similar to NASS/CDS/GES in the US and GIDAS in Germany was developed. Of course all relevant accident related parameters including pictures and severity information were collected. As a matter of fact based on scaled sketches and reconstruction benefit analyses can be done in order to analyze the accident scenery in India. As a first outcome influence from infrastructure, missing education and vehicle safety were identified as key parameters in order to reduce the number of accidents and casualties. To compare the accident situation against international standards an accident classification for left hand traffic was developed based on the German Insurance classification system. Looking into detail additional accident types were identified and added to create an Indian accident type catalogue. The positive results encouraged several OEMs to participate in this investigation and together with BOSCH a consortium was established in 2010/11. Within one year from beginning in May 2011 about 200 highway accidents were collected, reported and reconstructed using the new standard. Hence a first good overview of the accident situation is available for the Coimbatore Tamil Nadu area. The major target for establishing accident investigations is the extension towards other states of India and urban areas to achieve a better overview of the accident scenery. Therefore local and national authorities have to be embedded in order to strengthen the awareness against traffic safety.
This study analyses no.39 cases in which n.41 motorcyclists were fatally injured, or 36% of total motorcycle fatalities in Northern Ireland between 2004 and 2010 (n.114). There were n.17 cases (43.6%) where the actions of another vehicle driver caused the collision, in thirteen of these cases the motorcycles had their lights switched on. The remaining n.22 collisions (56.4%) were due to the actions of the motorcyclist. In the approach to the collision scene, there were n.13 cases (31.7%) in which the approach was a right hand bend and in n.8 (19.5%) cases, the approach was a left hand bend. In the remaining n.18 (43.9%) cases, the approach was a straight road. Of the n.17 (41.4%) motorcycles that slid after falling, n.10 (24.4%) fell onto their right side and the remaining n.7 (17.1%) fell onto their left side. The information from this study identifies primary and contributory causes of motorcycle collisions.
The main objective of EC CASPER research project is to reduce fatalities and injuries of children travelling in cars. Accidents involving children were investigated, modelling of human being and tools for dummies were advanced, a survey for the diagnosis of child safety was carried out and demands and applications were analysed. From the many research tasks of the CASPER project, the intention of this paper is to address the following: • In-depth investigation of accidents and accident reconstruction. These will provide important points for the injury risk curve, in order to improve it. Different accident investigation teams collected data from real road accidents, involving child car passengers, in five different European countries. Then, a selection of the most appropriate cases for the injury risk curve and the purposes of the project was made for an in-depth analysis. The final stage of this analysis was to conduct an accident reconstruction to validate the results obtained. The in-depth analysis included on-scene accident investigation, creating virtual simulations of the accident/possible reconstruction, and conducting the reconstruction. In the cases of successful reconstructions, new points were introduced to the injury risk curves. Accident reconstructions of selected cases were carried out in test laboratories as the next step following in-depth road accident investigation. These cases were reconstructed using similar child restraint systems (CRS) and the same type make and model as in the real accidents. Reconstructing real cases has several limitations, such as crash angle, cars" approximation paths and crash speed. However, a few changes and applications on the testing conditions were applied to reduce the limitations and improved the representations of the real accidents. After conducting the reconstructions, a comparison between the deformations of the cars on the real accident and the vehicles from the reconstructions was made. Additionally, a correlation between the data captured from the dummies and the injury data from the real accident was sought. This finalises an in-depth analysis of the accident, which will provide new relevant points to the injury risk curve. The CASPER project conducted a large research programme on child safety. On technical points, a promising research area is the developing injury risk curves as a result of in-depth accident investigations and reconstructions. This abstract was written whilst the project was not yet finished and final results are not yet known, but they will be available by the time of the conference. All the works and findings will not necessarily be integrated in the industrial versions of evaluation tools as the CASPER project is a research program.
Injuries in motorbike accidents in correlation with protective clothes and mechanism of the accident
(2013)
This study deals with a possible connection between safety clothing / accident mechanism and injury severity in a state-wide traffic accident investigation with focus on light and small motorbike-involvement for accidents in the area of the Saarland in which the persons riding the bike have been injured or killed. An interdisciplinary team of medical scientists and engineers collected the medical and technical data as well as all the relevant traces of the accident on scene and in time. During twenty months of data collection a total of 401 cases could be gathered. Grave injuries were more common for the group of heavier motorcycles (>125 ccm). Motorcyclists had been polytraumatized only in the group where the accident was connected with a collision. Significant correlation between protective clothes and injury severity could only be found for protective gloves and protective trousers. The knowledge about mechanism of the accident, protective clothes and severity of injuries can be helpful for the improvement of road and motorcyclists' safety.
The number of road accidents in Portugal has decreased significantly in the last decades, however, this tendency is not similar in all types of transportation. In the most recent years and by European standards, Portugal is still one of the leading countries concerning the number of fatalities in Powered Two Wheelers (PTW) accidents. To this effect, the in-depth investigation of PTW accidents is crucial and so, a thorough statistical analysis concerning the main factors influencing PTW riders injury severity accidents was undertaken regarding the 2007-2010 period in the National Road Safety Authority (ANSR) injured riders database using the software SPSS. In addition, to determine the importance of absent factors in the database analysis, such as velocity, a set of 53 real accidents involving PTW were also investigated and computationally reconstructed using the software PC-Crash. Lateral collisions between a motorcycle, its rider and the side of three different passenger cars were also simulated, varying the motorcycle impact angle and velocity in order to estimate the PTW deformation energy and the rider- injuries, as this accident configuration stands out in terms of frequency and even severity. The results of this detailed study are presented.
Aus einer aktuellen BASt-Studie ("Legalbewährung nach Neuerteilung der Fahrerlaubnis") geht hervor, dass eine Fahrerlaubnisentziehung bei mehrfach verkehrsauffälligen Fahrern nicht unbedingt zur Verhaltensänderung führt: Personen, denen der Führerschein wegen Überschreitens der Punktegrenze entzogen wurde, bergen ein doppelt so hohes Risiko, schuldhaft einen Unfall zu verursachen, wie Personen, deren Fahrerlaubnis wegen Alkohol- oder Drogenkonsums entzogen wurde. Eine Interventionsmaßnahme im Rahmen des Punktsystems stellt ein Hilfsangebot dar, das Fahrerlaubnisinhabern die Möglichkeit gibt, ihr riskantes Fahrverhalten mit professioneller Unterstützung langfristig zu verändern, um zukünftig regelkonform am Straßenverkehr teilzunehmen. Eine Interventionsmaßnahme kann damit einen wichtigen Beitrag zur Reduktion des Unfallrisikos von mehrfach verkehrsauffälligen Fahrern und damit zur Erhöhung der Verkehrssicherheit leisten. Für die bisherigen Aufbauseminare für Punkteauffällige (ASP) konnte kein Wirksamkeitsnachweis erbracht werden. Aus wissenschaftlicher Sicht wurde der den Aufbauseminaren zugrunde liegende Moderationsansatz kritisch hinterfragt. So geht aus einem Gutachten über die Qualität der Aufbauseminare hervor, dass Zweifel bestehen, dass das Ziel der Einstellungsänderung verkehrsauffälliger Fahrer mit dem zugrundeliegenden Ansatz erreicht werden kann. Vor diesem Hintergrund wurde die BASt im Rahmen der Reform des Verkehrszentralregisters vom Bundesministerium für Verkehr, Bau und Stadtentwicklung (BMVBS) im Juni 2012 beauftragt, die Grundlagen für ein wissenschaftlich begründetes Konzept für eine neue, wirksame Interventionsmaßnahme (Fahreignungsseminar, FES) für Punkteauffällige vorzulegen. Die Grundlagen zum Fahreignungsseminar wurden in drei Forschungsprojekten erarbeitet. Diese werden im vorliegenden Bericht dargestellt. Teil 1: Optimierung der Interventionsmaßnahmen im Rahmen der Reform des Mehrfachtäter-Punktsystems. Teil 2: Konzeption einer edukativen Teilmaßnahme der Fahreignungsseminare für verkehrsauffällige Kraftfahrer. Teil 3: Entwicklung eines Rahmenlehrplans für den edukativen Teil des im Rahmen der Reform des Punktsystems geplanten Fahreignungsseminars.
The grip between the road surface and vehicle tires is the physical basis for the moving of all vehicles in road traffic. In case of an accident the available grip level is one of the most relevant influence factors, influencing the causation and the procedure of the accident. However, the estimation of the grip level is not easy and therefore, is commonly not done on the accident scene. This is especially true for the measurement of the water depth. Until now, real accident databases provide no measurement data about the grip level and the water film depth and thus, the estimation of its influence is not possible yet. From the tyre manufacturers point of view, it is important to know about the road conditions (namely grip level, macro-texture, water depth, temperature) at the accident scene, as well as the operating conditions of the vehicles (braking, loss of control, speed, etc). These data is necessary to define relevant tyre traction tests for the end-user and for regulations. For this reason VUFO and Michelin developed a consistent method for the measurements of grip level and water depth for the accidents of the GIDAS database. The accident research team of Dresden, which documents about 1000 accidents with at least one injured person every year, is measuring the micro-roughness and the macro-roughness directly on the spot. For the measurement of the micro-roughness a Skid Resistance Tester (British Pendulum) is used. The Mean Texture Depth (describing the macro-roughness) is measured by the Sand Depth Method. Since June 2009, measurements for more than 700 accidents including 1200 participants have been carried out. In case of wet or damp road conditions during the accident, the water depth is measured additionally. Therefore VUFO and Michelin developed a special measurement device, which allows measurements with an accuracy of 1/10 millimetre. The measurement point at the accident scene is clearly defined and thus, the results are comparable for all different accidents and participants. The use of the GIDAS database and the accident sampling plan allows representative statements for the German accident scenario. With this data it is possible for the first time to have an accurate view of the road conditions at the accident scene. One possibility is a more detailed estimation of hydroplaning accidents using the actually measured water depths. The development of new testing methods and new tires can be based on the real situation of the road infrastructure. Furthermore, the combination of the technical GIDAS data and the measured road surface properties can also be used for the estimation of effectiveness of several safety systems like the brake assist and/or emergency braking systems. The calculation of a reduced collision speed due to the use of a brake assist is only one example for the application of real measured grip level data.
Supervision of the safety performance in public transport is one of the main tasks of the Federal Office of Transport (FOT) in Switzerland. Recently a three level system of safety indicators has been defined to cover all means of Swiss public transport. The safety indicators are fed by the FOT incident database since the year 2000. In cooperation with the Institute for Traffic Safety and Automation Engineering (iVA) at TU Braunschweig, Germany, FOT is developing a suitable methodology for the definition and evaluation of the safety targets in Swiss public transport. The methodology is applied for evaluation of safety indicators on a country level and for single transport companies. In a new approach the abovementioned methodology is applied to car incident data to develop an indicator based cross-modal safety measure.
Having a look at safety to traffic and the prevention of accidents it can be observed that technical improvements in active safety of vehicles have let to various positive effects in this area. Among other components the tyre-road-contact takes a key role in the development of active safety technologies. All forces in accelerating, breaking and vehicle guidance have to be transmitted through the tyre-road contact area by friction forces. A common way to characterize a friction process is to identify the coefficient of friction μ between two touching materials. Even though there are several approaches to experimentially characterise road surfaces, no standard method exists. In this paper an overview of existing test methods is given. Furthermore the preliminary design of a newly developed portable test device with its possibility to investigate the tyre-road-friction of arbitrary roads or even places of accidents is shown.
Teil 1, Informations- und Kommunikationstechniken zur Optimierung des Betriebsdienst-Managements: In vielen Arbeits- und Organisationsprozessen des Straßenbetriebsdienstes werden Informations- und Kommunikationstechnologien (IuK-Technologien) eingesetzt, um Arbeitsabläufe einfacher, besser und sicherer zu gestalten sowie umfassende Daten für die Abrechnung und weitere Planung bereit zu stellen. Die Potenziale der IuK-Technologien werden im Straßenbetriebsdienst häufig nur unvollständig genutzt. Ziel des FE-Vorhabens war die systematische Aufbereitung von Anforderungen und Möglichkeiten der IuK-Technologien. Die Anforderungen des Straßenbetriebsdienstes an den Einsatz der IuK-Technologien berücksichtigen neben der derzeitigen Praxis auch künftige Entwicklungen, die sich beispielsweise aus der Einführung der wirtschaftlichkeitsorientierten Steuerung des Betriebsdienstes ergeben. Damit IuK-Technologien erfolgreich betrieben werden können, ist neben Funktionalität und Qualität der technischen Komponenten auch die Berücksichtigung der organisatorischen und betrieblichen Abläufe im Straßenbetriebsdienst von großer Bedeutung. In den Untersuchungen zur mobilen Sprach- und Datenkommunikation wurde deutlich, dass bei Auslaufen des Analogfunks neben dem Aufbau eigenständiger Digitalfunknetze auch die Nutzung des kommerziellen Mobilfunks in Betracht gezogen werden sollte. Wesentliche Grundlagen für die wirtschaftliche Steuerung sind die automatisierte Einsatzdatenerfassung sowie ein umfassendes Bestandsdatenmanagement, wobei Bestandsobjekte auch mit Hilfe von RFID-Chips identifiziert werden können. Im Winterdienst sollten verstärkt berührungslose Sensoren für die Erfassung von Fahrbahntemperatur und "zustand zum Einsatz kommen. Salzmanagementsysteme ermöglichen u.a. die Überwachung von Streustoffvorräten an nicht besetzten Standorten sowie eine übergeordnete Logistik bei Lieferengpässen. Wichtig sind auch Systeme zur Unterstützung der Fahrer von Winterdienstfahrzeugen, durch die Einsätze anforderungsgerechter und flexibler erfolgen können. Es wurden auch innovative IuK-Technologien analysiert, die große Potentiale für den Straßenbetriebsdienst erkennen lassen. Hierzu zählen die mobile Erfassung des Straßenzustandes für den Winterdienst durch Einsatzfahrzeuge oder Fahrzeuge des Individualverkehrs, alternative Kommunikationswege für die Warnung der Verkehrsteilnehmer vor Arbeitsstellen im Verkehrsraum sowie das autonome Fahren von Absperr- und Vorwarnanhängern, durch das die Gefährdung des Personals im Verkehrsraum deutlich reduziert werden kann. Es besteht jedoch noch erheblicher Forschungs- und Entwicklungsbedarf, um diese Technologien effizient im Straßenbetriebsdienst einzusetzen sowie ihren Nutzen umfassend bewerten zu können. Teil 2, Autonomes Fahren für den Straßenbetriebsdienst: Mitarbeiter des Betriebsdienstes sind in Arbeitsstellen auf Autobahnen enormen Unfallgefahren ausgesetzt. Weiterhin erfordert die Sicherung von Arbeitsstellen kürzerer Dauer (AkD) einen hohen personellen und zeitlichen Aufwand. Das FE-Projekt "Informations- und Kommunikationstechniken zur Optimierung des Betriebsdienst-Managements" zeigte, dass die Anwendung autonomer Fahrzeuge im Betriebsdienst die Gefährdung des Personals im Verkehrsraum reduzieren kann. In Ergänzung dazu wurde der Entwicklungsansatz "Autonomes Fahren für den Straßenbetriebsdienst" konkretisiert. Eine untersuchte Minimallösung beinhaltet ein autonom fahrendes Absperrfahrzeug, welches einem Führungsfahrzeug auf der Autobahn folgt. In einem zweiten Gesamtkonzept ist die Automatisierung einer gesamten Absicherungskolonne mit Absperr- und Vorwarnfahrzeugen incl. der unbemannten Anfahrt zur Autobahn auf nicht öffentlichen Straßen vorgesehen. In der technischen Umsetzung handelt es sich bei den Einsatzszenarien der unbemannten Fahrzeuge um Formationsfahrten oder Folgefahrt-Szenarien auf der Autobahn. Unbemannte Fahrzeuge mit den dargestellten Funktionsweisen können deutliche Sicherheitssteigerungen für Betriebsdienstmitarbeiter bieten. Eine erste Abschätzung ergab, dass rund 70 % der Mitarbeiter, welche in AkD auf Autobahnen beim Aufenthalt in Fahrzeugen verunglücken, durch den Einsatz unbemannter Arbeitsstellensicherung geschützt werden können. Dies entspricht rund der Hälfte der insgesamt bei Unfällen in AkD verunglückten Mitarbeiter. Für die Realisierung unbemannter Sicherungsfahrzeuge sind viele technische Fragestellungen zu klären, insbesondere bezüglich der Prognose und Detektion von Fehlfunktionen. Für den Einsatz der vorgeschlagenen Systeme ist eine allgemeine Genehmigung für den täglichen Betrieb notwendig. Hierzu sind zahlreiche rechtliche Fragestellungen zu beantworten. Somit kann die Implementierung unbemannter Sicherungsfahrzeuge im Betriebsdienst als Pilotprojekt für unbemanntes Fahren im Allgemeinen bzw. in anderen Branchen dienen.
Learner drivers are readied for their participation in motorised transport within the framework of specific, internationally-diverse preparation systems. These systems are historically developed and are characterised by country-specific economic, infrastructural, legal and cultural circumstances. With the aid of functionally-distinguishable teaching and learning methods as well as testing methods, a conceptual framework was created whilst drawing upon research-methodological approaches of comparative political science as well as teaching and learning principles that facilitated a description and analysis of the systems for a comparative observation to be performed. The systems for the preparation of learner drivers in 44 countries are illustrated in the report. The descriptions are based upon surveys of experts from various institutions (ministries of transport, driving instructor associations, testing organisations) as well as upon literary and Internet research. Alongside European countries with a traditional formal driver training, \"Graduated Driver Licensing\" systems that are primarily encountered in English-speaking countries were also taken into account when selecting the countries. They are characterised by the guarantee of gaining comprehensive driving experience under reduced risk conditions in the form of supervised driving prior to the start of independent driving as well as protective special rules for learner drivers whilst gaining further driving experience during the initial phase of independent driving. The results enable a detailed insight into the country-specific structure of learner driver preparation with the components of the formal driver training in driving schools, informal teaching and learning methods such as supervised driving, the driving tests that must be successfully completed as well as legal frameworks and quality assurance measures. The functionality of system components and architectures shall be discussed against the backdrop of evaluation findings regarding the effectiveness in terms of safety.
The number of injured car occupants decreases constantly. Nevertheless, they account for nearly 50% of all fatalities and about 44% of all seriously injured persons in German traffic accidents. Further reductions of casualties require multiple efforts in all parts of traffic safety. In this paper a detailed analysis of the important pre-hospital rescue phase was done. The basis for future improvements is the knowledge about injury causation of car occupants in combination with other corresponding influence factors. For that reason more than 1.200 severe (AIS3+) injuries of frontal car occupants were analyzed. For the most relevant injuries of car occupants multivariate analysis models were created to predict the probability of these injuries in a real crash scenario. In addition to the collision severity different influence factors like impact direction, seat belt usage, age of the occupant, and gender were analyzed. Furthermore, the models were checked regarding the goodness of fit and all results all results were checked concerning their robustness. The prediction models were created on the basis of 5.000 car accidents. Afterwards, the models were validated using 4.000 different car accidents. The prediction of the probability of severe injuries could be used for different applications in the field of traffic safety. One possibility is the implementation of the models in a tool for the on-the-spot diagnosis. The background for the development of such applications is the fact, that there are only limited diagnostic possibilities available at the accident scene. Nevertheless, the rescue forces have to make essential decisions like the alerting of the necessary medical experts, appropriate treatment, the type of transportation and the choice of an adequate hospital. These decisions quite often decide between life and death or influence the long-term effects of injured persons. At this point, indications of expectable injuries could help enormously. To enable even persons with limited technical knowledge to use the tool, a procedure was developed that facilitates the assumption of the given crash severity. Another important possibility for the application of the prediction models is the use for the qualification of information sent by e-call systems.