Sonstige
Filtern
Erscheinungsjahr
Dokumenttyp
- Buch (Monographie) (563)
- Konferenzveröffentlichung (404)
- Wissenschaftlicher Artikel (92)
- Bericht (23)
- Teil eines Buches (Kapitel) (14)
- Arbeitspapier (13)
Sprache
- Deutsch (771)
- Englisch (337)
- Mehrsprachig (1)
Schlagworte
- Germany (575)
- Deutschland (574)
- Research report (413)
- Forschungsbericht (411)
- Conference (329)
- Konferenz (325)
- Accident (229)
- Unfall (229)
- Safety (225)
- Sicherheit (223)
Institut
- Sonstige (1109) (entfernen)
As the official German catalogue of accident causes has difficulty in matching the increasing demands for detailed psychologically relevant accident causation information, a new system, based on a "7 Steps" model, so called ACASS, for analyzing and collecting causation factors of traffic accidents, was implemented in GIDAS in the year 2008. A hierarchical system was developed, which describes the human causation factors in a chronological sequence (from the perception to concrete action errors), considering the logical sequence of basic human functions when reacting to a request for reaction. With the help of this system the human errors of accident participants can be adequately described, as the causes of each range of basic human functions may be divided into their characteristics (influence criteria) and further into specific indicators of these characteristics (e.g. distraction from inside the vehicle as a characteristic of an observation-error and the operation of devices as an indication for distraction from inside the vehicle. The causation factors accordingly classified can be recorded in an economic way as a number is assigned to each basic function, to each characteristic of that basic function and to each indicator of that characteristic. Thus each causation factor can be explicitly described by means of a code of numbers. In a similar way the causation factors based on the technology of the vehicle and the driving environment, which are also subdivided in an equally hierarchical system, can be tagged with a code. Since the causes of traffic accidents can consist of a variety of factors from different ranges and categories, it is possible to tag each accident participant with several causation factors. This also opens the possibility to not only assign causation factors to the accident causer in the sense of the law, but also to other participants involved in the accident, who may have contributed to the development of the accident. The hierarchical layout of the system and the collection of the causation factors with numerical codes allow for the possibility to code information on accident causes even if the causation factor is not known to its full extent or in full detail, given the possibility to code only those cause factors, which are known. Derived from the systematic of the analysis of human accident causes ("7 steps") and from the practical experiences of on-scene interviews of accident participants, a system was set in place, which offers the possibility to extensively record not only human causation factors in a structured form. Furthermore, the analysis of the human causation factors in such a structured way provides a tool, especially for on-scene accident investigations, to conduct the interview of accident participants effectively and in a structured way.
With an ever rising human life expectancy the share of elderly people in society is constantly rising. This leads to the fact that at the same rate the share of people with age related diseases such as dementia and poor eyesight taking part in traffic will rise and therefore traffic accidents caused by this group of people due to the disease will play an ever greater role. This Situation will be among the future challenges of road safety work. At present this study displays specific characteristics of accidents caused by elderly car drivers (aged 65 or higher) based on the analysis of the German In-Depth Accident Study GIDAS. Herein almost 1000 elderly car drivers were identified as accident participants in the years 2008 to 2011. The focus of this study lies on identifying special types of accidents which are caused by elderly drivers and on characterizing these types with the information gathered on scene and by interviewing the participants. The main evidence analyzed is the knowledge about the accident locality, the trajectories of the participants as well as the reasons for the occurrence of the accidents. Furthermore personal information such as the personal condition before the accident and driving purposes is used to identify patterns of contributing circumstances for accidents caused by elderly traffic participants.
In the context of this study, different data sources for accident research were examined regarding their possible data access and evaluated concerning the individual quality and extent of the data. Analyses of accidents require detailed and comprehensive information in particular concerning vehicle damages, injury patterns and descriptions of the accident sequence. The police documentation supplies the basic accident statistics and is amended in the context of the forensic treatment by further information, e.g. by medical and technical appraisals and witness questionings. As a new approach to the data acquisition for the analysis of fatal traffic accidents, the information was made usable which was collected by the police and by the investigations of the public prosecutor. The best strategy for obtaining reliable, extensive and complete data consists of combining the information from these two sources: the very complete, but elementary statistic data of the Niedersächsisches Landesamt für Statistik (Lower Saxony State Authority of Statistics), based on the police documentation as well as the very extensive accident information resulting from the investigation documentation of the public prosecutor after conclusion of the procedure, the so-called Court Records. Of all 715 fatal traffic accidents, which happened in the year 2003 in the German State of Lower Saxony, 238 cases were selected by means of a statistically coincidental selective procedure based on a statistically representative manner (every third accident). These cases cover the investigation documents of the 11 responsible public prosecutor- offices, which were requested and evaluated while preserving the data security. Of the 238 cases 202 cases were available, which were individually coded and stored in a data base using 160 variables. Thus a data base of a sample of representative data for fatal accidents in Lower Saxony was set up. The data base contains extensive information concerning general accident data (35 variables), concerning road and road surface data (30 variables), concerning vehicle-specific data (68 variables) as well as concerning personal and injury data (27 variables).
Within the COST Action TU1101 the working group WG 1 is dealing with acceptance criteria and problems in helmet use while bicycling concerning conspicuity, thermal stress, ventilation deficits and other potential confounding. To analyze the helmet usage practice of bicyclists in Europe a questionnaire was developed in the scope of working group 1 to collect relevant information by means of a field study. The questionnaire consists of some 66 questions covering the fields of personal data of the cyclist, riding und helmet usage habits, information concerning the helmet model and the sensation of the helmet, as well as information on previous bicycle accidents. A second complementary study is conducted to analyze if the use of a bicycle helmet influences the seating geometry and the posture of cyclists when riding a bicycle and if the if the helmet vertically limits the vision. For this purpose cyclists with and without helmets were photographed in real world situations and relevant geometrical values such as the decline of the torso, the head posture of the upper vertical vision limit due to the helmet were established from the photos. The interim results of the field studies which were conducted in Germany by the Hannover Medical School are presented in this study. Some 227 questionnaires were filled out, of which 67 participants had used a helmet and 42 of the 227 participants have had a bicycle accident before. For the analysis of the riding position and posture of the cyclist over 40 pictures of riders with a helmet and over 240 pictures of riders without a helmet were measured concerning the seating geometry to describe the influence of using a bicycle helmet. Some results in summary: From the riders interviewed with the questionnaire only 11% of the city bike riders and 12% of the mountain bike riders always used the helmet, while 38% of the racing bike riders and 88% of the e-bike-riders always used the helmet. The helmet use seems not to change the sensation of safety of cycling compared to the use of a car. The arguments for not wearing a helmet are mostly stated to be the short distance of a trip, high temperatures or carelessness and waste of time. The reasons for using a helmet are stated to be the feeling of safety and being used to using a helmet. Being a role model for others was also stated to be a reason for helmet use. Concerning the sensation of the helmet 9% of the riders reported problems with the field of vision when using a helmet, 57% saw the problem of sweating too much, and 10% reported headaches or other unpleasant symptoms like pressure on the forehead when using the helmet. The analysis of the seating posture from the pictures taken of cyclists revealed that older cyclists generally have a riding position where the handle bar is higher than the seat (0-° to 10-° incline from seat to handlebar), while younger riders had a higher variance (between -10-° decline and 20-° incline). Further, elderly riders and riders with helmets seem to have a more upright position of the upper body when cycling. The vertical vision limit due to the helmet is determined by the front rim of the helmet (mostly the sun shade). Typical values here range from 0-° (horizontal line from the eye to the sun shade) to 75-° upwards, in which elderly riders tend to have a slightly higher vertical vision limit possibly due to the helmet being worn more towards the face.
Although the statistics show a decreasing rate of child injuries and fatalities in German road accidents more efforts can be made to protect children in cars e.g. by developing appropriate child restraint systems. An important part in of this work can be achieved with the help of crash tests using child dummies. However these crash tests cannot completely reflect the situation of real world crashes as factors like children moving out of the optimal position or children incorrectly fastened by their parents are difficult to predict. Therefore this study gives an overview over the current accident and injury situation of child occupants in cars in German road accidents.
An increased use of bicycles comes along with an increased number of bicycle accidents. Bicycle accidents are more frequent than recorded by the police. To evaluate the real number of bicycle accidents during 12 months in Münster, Germany, injuries were collected by the Police and in each emergency unit anonymously. 2,153 patients had to be treated in a hospital, nearly triple the number of accidents that were registered by the police. Beside fractures of the upper extremities with major surgery, traumatic brain injuries were the leading cause for hospital admission. Bicycle helmet use can reduce traumatic brain injuries and the related number of deaths and hospital admissions. Laws on bicycle helmet might decrease the use of bicycles and therefore the reduction of positive health benefits. Other methods of accident prevention may lead to positive effects as helmet legislation as well, while having no reduction in bicycle use.
Ermittlung der Schadstoffbelastung in einem Tunnelbauwerk mit geschlitzter Decke an der EB 42 n
(1987)
Eine Schnellstraße durch einen Tunnel mit einer in der Mitte geschlitzten Decke zu führen, wie an der EB 42n im Bereich Königswinter-Oberdollendorf, ist in der Bundesrepublik Deutschland ohne Vorbild. Zur Klärung, welche Umweltbelastungen von einem derartigen Bauwerk ausgehen können, wurde in einer Messkampagne untersucht, welche Schadstoffbelastungen im Tunnel und außerhalb des Tunnels auftreten. Bei einem Verkehrsstau auf einer Richtungsfahrbahn von mehreren Kilometern Länge im Bereich des Tunnelbauwerkes wurden im Tunnel Kohlenmonoxidkonzentrationen gemessen, die um mehr als den Faktor 5 unter dem Grenzwert aus den Richtlinien für die Ausstattung und den Betrieb von Straßentunneln (RABT) lagen. Die Schadstoffbelastungen am Schlitz des Tunnels sind gering. Sie unterschreiten sowohl die Grenzwerte nach TA Luft, wie auch die Grenzwerte nach der VDI-Richtlinie 2310, die wegen fehlender Grenzwerte für den Straßenbau als Orientierungshilfen herangezogen wurden. Betrachtet wurden die Stoffe Kohlenmonoxid, Stickstoffdioxid und Ozon. Durch die Entwicklung eines physikalischen Modells zur Berechnung der Konzentrationsprofile in den beiden Tunnelröhren könnte das Prinzip der natürlichen Lüftung erklärt und gezeigt werden, dass ca. 75 % bis 78 % der im Tunnel emitierten Schadstoffe über den Schlitz in der Tunneldecke und die restlichen 22 % bis 25 % über die beiden Portale abgeführt werden. Unter dem Aspekt der Luftreinhaltung ist dieses Bauwerk als umweltfreundlich anzusehen.
As bearing capacity measurements become more and more important, the necessity of assuring quality by establishing a QA system becomes more relevant. Within this context, the FGSV recommends the introduction of comparative measurements. Since 2015, two pilot events took place, with the main aim of introducing repetitive comparative measurements, in which all FWD operators shall participate. The results of the comparative measurements show that the basic principles behind comparative measurements (of the FWD), elaborated as a Europe-wide consensus and put into practice in the Netherlands and the United Kingdom, are valid, but still there is a variety of questions to be answered concerning certain details of the measuring system itself, e. g. measurement of the temperatures (air, pavement) and the impact of load introduction. All in all, the two pilot events in 2015 and 2016 proved that the comparability of the different FWD measuring devices is satisfactory.
Um ihre wichtige Verkehrsführungsfunktion vollständig erfüllen zu können, müssen Fahrbahnmarkierungen jederzeit eindeutig und unzweifelhaft erkennbar sein. Dies erfordert den flächendeckenden Einsatz von Typ II-Markierungen, weil nur sie auch bei Nacht und Nässe ausreichend erkennbar sind. Die in den Zusätzlichen Technischen Vertragsbedingungen und Richtlinien für Markierungsarbeiten im Straßenbau, Ausgabe 2002 (ZTV M 02) festgelegten verkehrstechnischen Eigenschaften für Typ II-Markierungen gelten für den Neu- und Gebrauchszustand. Sie stellen jedoch keine Beschaffenheits- oder Haltbarkeitsgarantie dar. Das bloße Unterschreiten eines Wertes beweist daher noch keinen Mangel. Nur wenn für die Wertunterschreitung ein Fehler ursächlich war, der der Markierung bereits zum Zeitpunkt der Abnahme irgendwie anhaftete, ist darin ein vom Auftragnehmer zu vertretener Mangel zu sehen. Normaler gebrauchsbedingter Verschleiß ist kein Mangel. Viele der vom Auftragnehmer zu vertretenden Fehler lassen sich nur bei oder unmittelbar nach der Applikation sicher feststellen. Die derzeit gängige Praxis, Markierungen erstmals wenige Tage vor Ablauf der Verjährungsfrist für Sachmangelansprüche zu begutachten beziehungsweise ausschließlich zu messen, sollte aufgegeben werden. Denn zu diesem Zeitpunkt lässt sich kaum noch feststellen, ob eine mögliche Wertunterschreitung vom Auftragnehmer zu vertreten ist oder nur normaler Verschleiß vorliegt. Es sollte verstärkt von den in den ZTV M 02 vorgesehenen Kontrollmechanismen bei der Applikation und an der fertigen Markierung durch fachkundiges Personal oder anerkannte Prüfstellen Gebrauch gemacht werden. Hierfür sollten Hinweise und Checklisten erstellt werden.
Since a number of human models have been developed it appears sensible to use these models also in the accident analysis. Especially the understanding of injury mechanisms and probably even injury risk curves can be significantly improved when interesting accidents are reconstructed using human body models. However, an important limitation for utilising human models for accident reconstruction is the effort needed to develop detailed FE models of the accident partners or to prepare the human model reconstruction by running physical accident reconstructions. The proposed approach for using human models for accident reconstruction is to use simplified and parametric car models. These models can be adapted to the crash opponents in a fast and cost effective way. Although, accuracy is less compared to detailed FE models, the relevant change in velocity can be simulated well, indicating that the computation of a detailed crash pulse is not needed. Two frontal impact test accidents that were reconstructed experimentally and using the parametric car models are indicating sufficient correlation of the adapted parametric car models with the full scale crash reconstructions. However, further developments of the parametric models to be capable for the use in lateral impacts and rear impacts are needed. For the PC Crash simulation runs the output sampling rate is too large to allow sufficient analysis. In addition the performance appears to be too general.
Within the process of integrating passenger airbags in the vehicle fleet a problem of compatibility between the passenger airbag and rear-facing child restraint systems was recognised. Especially in the US several accidents with children killed by the passenger airbag were recorded. Taking into account these accidents the deactivation of a present passenger airbag is mandatory if a child is carried in a rear-facing child restraint system at the front passenger seat in all member states of the European Union. This rule is in force since the deadline of 2003/20/EC at the latest. In the past a passenger airbag either could not be disabled or could only be disabled by a garage. Today there are a lot of different possibilities for the car driver himself to disable the airbag. Solutions like an on/off-switch or the automatic detection of a child restraint system are mentioned as an example. Taking into account the need for the deactivation of front passenger airbags two types of misuse can occur: transportation of an infant while the airbag is (still) enabled and transportation of an adult, while the airbag is disabled, respectively. Within a research project funded by BASt both options of misuse were analysed utilising two different types of surveys amongst users (field observations and interviews, Internet-questionnaires). In addition both analysis of accident data and crash tests for an updated assessment of the injury risk caused by the front passenger airbag were conducted. Both surveys indicate a low risk of misuse. Most of the misuse cases were observed in older cars, which offer no easy way to disable the airbag. For systems, which detect a child seat automatically, no misuse could be found. The majority of misuses in cars equipped with a manual switch were caused by reasons of oblivion. Also the accident analysis indicates a minor risk of misuse. From more than 300 cases of the GIDAS accident sample that were analysed, only 24 children were using the front passenger seat in cars equipped with a front passenger airbag. In most of these cases the airbag was deactivated. When misuse occurred the injury severity was low. However, when analysing German single accidents the fatality risk caused by the front passenger airbag became obvious. From the technical point of view, there were important changes in the design of passenger airbags in recent years. Not only volume and shape were modified, but also the mounting position of the entire airbag module was changed fundamentally. Even if these findings do not allow obtaining general conclusions, a clear tendency of less danger by airbags could be identified. For future vehicle development a safe combination of airbags and rear faced baby seats seems to be possible in the long term. This would mean that both types of misuse could be eliminated. For parents an easier use of child seat and car would be the result.
The share of high-tensile steel in car bodies has increased over the last years. While occupant safety has generally benefited from this measure, there is a potential risk that, as a result, rescue time may increase considerably. In more than 60% of all car occupant fatalities a technical rescue has been necessary. These are in particular those cases where occupants die immediately at the accident scene. Therefore, in these cases "rescue time" is a very sensitive parameter. In addition to the general analysis of the need of technical rescue and the actual rescue time depending on model years, the injury pattern of occupants requiring technical rescue will be analysed to provide advice for rescue teams. Furthermore, a detailed analysis of rescue measures for the most popular car models depending on the safety cell design is given.
For the assessment of vehicle safety in frontal collisions, the crash compatibility between the colliding vehicles is crucial. Compatibility compromises both the self protection and the partner protection properties of vehicles. For the accident data analysis, the CCIS (GB) and GIDAS (DE) in-depth data bases were used. Selection criteria were frontal car accidents with car in compliance with ECE R94. For this study belted adult occupants in the front seats sustaining MAIS 2+ injuries were studied. Following this analysis FIMCAR concluded that the following compatibility issues are relevant: - Poor structural interaction (especially low overlap and over/underriding) - Compartment strength - Frontal force mismatch with lower priority than poor structural interaction In addition injuries arising from the acceleration loading of the occupant are present in a significant portion of frontal crashes. Based on the findings of the accident analysis the aims that shall be addressed by the proposed assessment approach were defined and priorities were allocated to them. The aims and priorities shall help to decide on suitable test procedures and appropriate metrics. In general it is anticipated that a full overlap and off-set test procedure is the most appropriate set of tests to assess a vehicle- frontal impact self and partner protection.
To improve vehicle safety in frontal collisions, the crash compatibility between the colliding vehicles is crucial. Compatibility aims to improve both the self and partner protection properties of vehicles. Although compatibility has received worldwide attention for many years, no final assessment approach has been defined. Within the Frontal Impact and Compatibility Assessment Research (FIMCAR) project, different frontal impact test procedures (offset deformable barrier [ODB] test as currently used for Economic Commission for Europe [ECE] R94, progressive deformable barrier test as proposed by France for a new ECE regulation, moveable deformable barrier test as discussed worldwide, full-width rigid barrier test as used in Federal Motor Vehicle Safety Standard [FMVSS] 208, and full-width deformable barrier test) were analyzed regarding their potential for future frontal impact legislation. The research activities focused on car-to-car frontal impact accidents based on accident investigations involving newer cars. Test procedures were developed with both a crash test program and numerical simulations. The proposal from FIMCAR is to use a full-width test procedure with a deformable element and compatibility metrics in combination with the current offset test as a frontal impact assessment approach that also addresses compatibility. By adding a full-width test to the current ODB test it is possible to better address the issues of structural misalignment and injuries resulting from high acceleration accidents as observed in the current fleet. The estimated benefit ranges from a 5 to 12 percent reduction of fatalities and serious injuries resulting from frontal impact accidents. By using a deformable element in the full-width test, the test conditions are more representative of real-world situations with respect to acceleration pulse, restraint system triggering time, and deformation pattern of the front structure. The test results are therefore expected to better represent real-world performance of the tested car. Furthermore, the assessment of the structural alignment is more robust than in the rigid wall test.
When assessing the consequences of accidents normally the injury severity and the damage costs are considered. The injury severity is either expressed within the police categories (slight injury, severe injury or fatal injury) or the AIS code that rates the fatality risk of a given injury. Both injury metrics are assessing the consequences of the accident directly after the accident. However, not all consequences of accidents are visible directly after the accident and the duration of the consequences are different. Besides a physiological reduction of functionality social and psychological implications such as reduced mobility options, problems to continue the original job etc. are happening. In order to assess long term consequences of accidents the MHH Accident Research Unit established a brief questionnaire that is distributed to accident involved people of the Hannover subset of the GIDAS data set approx. one year after the accident beginning with the accident year 2013. The basic idea of using a brief questionnaire (in fact only one page) is to obtain a relatively large return rate because the questionnaire appears to be simple and quickly answered. This appears to be important because it is believed that the majority of accident involved people will not report long term consequences. In order to allow a more detailed survey amongst those responders that are reporting long term consequences they are asked for a written consent for the additional questionnaire that will be distributed at a time that is not yet defined. Long term consequences are reported for all addressed areas, medical, physiological, psychological and sociological by people without injuries, with minor injuries and with severe injuries.
This study examines the severity and types of injuries sustained by child pedestrians aged 18 years and below in order to identify the body regions at greatest risk for injury in a pedestrian accident. Detailed medical diagnoses were reviewed retrospectively for 572 child pedestrians admitted to an urban pediatric trauma center with injuries during the time period from January 2001 to December 2005. Eighty percent of these children sustained AIS 2 or greater injuries, most commonly to the lower extremity (41%) and head (34%). Fortyfour percent of admitted children had more significant AIS 3 or greater injuries primarily to the head (58%), thorax (17%) and lower extremities (14%). Testing procedures to assess the child- interaction with the motor vehicle should include injury assessment for the pediatric head, thorax and lower extremities. This understanding of how child pedestrians interact with motor vehicles may provide insight into effective countermeasures with potential for implementation in vehicle designs world-wide.
Die temperierte Straße
(2013)
Eine temperierte Straße? Bei genauerer Betrachtung weist die Vision einer temperierten Fahrbahnoberfläche überzeugende Vorteile auf und ist technisch bereits heute umsetzbar, wie eine Reihe von Projekten weltweit belegt. Im Rahmen der vorgestellten Machbarkeitsstudie wurden die Möglichkeiten und Grenzen einer Fahrbahntemperierung untersucht. Unter Berücksichtigung unterschiedlicher Asphalt- und Speicherkonzepte sowie der in Deutschland vorherrschenden geologischen und klimatischen Randbedingungen erfolgte eine Auswertung der Wirksamkeit und Wirtschaftlichkeit eines energetischen Gesamtsystems aus Fahrbahn, Speicher und Gebäude. Die Studie stellt die Rahmenbedingungen für eine Realisierung einer solchen Anlage dar. In vorangegangenen Forschungsvorhaben wurde deutlich, dass sich mit einer Fahrbahnheizung, abgesehen vom volkswirtschaftlichen Nutzen, aus der gesteigerten Verkehrssicherheit nur ein geringer betriebswirtschaftlicher Nutzen aus eingesparten Winterdiensteinsätzen erzielen lässt. Im nächsten Schritt wurde daher der Nutzen einer Kühlung der Fahrbahndecke im Sommer, die sich insbesondere bei Asphaltdeckschichten als vorteilhaft erweist, in die Betrachtung einbezogen. Bei den zugehörigen thermodynamischen Simulationen zeigte sich ein erheblicher Energieüberschuss in der Jahresbilanz. Daher war es nur folgerichtig, für diese Energie mögliche Abnehmer zu suchen. Im Gegensatz zu den erst im Verlauf des Nutzungszeitraums entstehenden Einsparungen aus der Kühlung der Fahrbahnoberfläche können aus einem solchen Verkauf erneuerbarer Energie ganz konkret und kurzfristig Einnahmen generiert werden. Es zeigt sich, dass mit der ganzjährigen Klimatisierung angrenzender Gebäude zwar Einnahmen erzielt werden können, die Wirtschaftlichkeit aber durch die Kosten für die Speicherung bestimmt wird. Letztlich scheint die Umsetzung einer solchen Anlage immer dann wirtschaftlich darstellbar, wenn die geologischen, klimatischen und topografischen Rahmenbedingungen eine effiziente Speicherung der Energie zulassen.
Sowohl im Bereich der invasiven, nicht zerstörungsfrei arbeitenden Methoden als auch bei den zerstörungsfrei und schnellfahrenden Techniken und Methoden ist in den letzten Jahren ein deutlicher Innovationsschub erkennbar. Mit diesen Methoden und Techniken wird das Ziel verfolgt, vergleichbare und hochwertige Substanzbewertungsverfahren sowohl fuer die Objekt- als auch die Netzebene aufzustellen. Der FGSV-Arbeitsausschuss "Substanzbewertung", seine Arbeitskreise, verschiedenste Forschungseinrichtungen und die BASt arbeiten gemeinsam daran, diese Methoden und Techniken zu evaluieren, zu standardisieren und auch neue Methoden und Techniken aufzustellen. Da die Fragestellungen der Substanzbewertung derzeit weltweit ein sehr beachtetes Thema darstellen, erfolgt die Bearbeitung oftmals im engen internationalen Austausch. Der Beitrag fasst den aktuellen Stand der Technik sowohl invasiv arbeitender Methoden als auch der zerstörungsfrei arbeitenden Methoden zusammen und zeigt, welche Potenziale und Grenzen hierbei noch zu bewerten sind. Des Weiteren wird ein Ausblick auf neue Methoden, Forschungsprojekte und Wissensdokumente gegeben.
A study on knowledge and practices of first aid and CPR among police officers in Colombo and Gampaha
(2017)
Around 85% of deaths in developing countries have been found to be due to road traffic accidents (RTAs), which cost the countries around 1-2% of their gross national product (GNP). In Sri Lanka there were 2,436 deaths reported from 36,045 RTAs in 2014. This study aimed at assessing first aid and cardiopulmonary resuscitation (CPR) knowledge among police officers and identifying its relationship to their first aid and CPR practices. A study was done on 493 police officers from Colombo and Gampaha who were selected using convenience sampling through a self-administered questionnaire. The results showed that the police officers had unsatisfactory knowledge and practices of CPR and interventions for bleeding and fractures. These should therefore be focused in their further training.
Fahrerinformations- und Fahrerassistenzsysteme (FIS/FAS), die während der Fahrt zusätzliche, den Fahrer entlastende Funktionen anbieten, können durch damit verbundene Bedienvorgänge Aufmerksamkeit beanspruchen und in der Folge durch visuelle Ablenkung und mentale Beanspruchung unerwünschte sicherheitsrelevante Veränderungen des Fahrverhaltens hervorrufen. Allerdings stellt die Interaktion mit Fahrerinformationssystemen bei fortschreitender Übung zunehmend geringere Aufmerksamkeitsanforderungen. Dieser Effekt des Kompetenzerwerbs ist bei der Beurteilung der sicherheitskritischen Fahrerbeanspruchung zu beachten. In einem Fahrversuch wurde die Veränderung von Ablenkungswirkungen als Folge des Kompetenzerwerbs in der Bedienung von Fahrerinformationssystemen untersucht. Als Aufgabe wurde die Zieleingabe in ein Navigationssystem gewählt. Zwei Navigationssysteme mit unterschiedlichen Mensch-Maschine-Schnittstellen wurden dabei eingesetzt. Mit denselben Systemen wurden in weiteren Trainingsstudien Daten zum Kompetenzerwerb für drei Altersgruppen erhoben. Als Methode zur kondensierten Beschreibung der Kompetenzerwerbsverläufe wurde die Schätzung von Potenzfunktionsparametern verwendet. Aufgrund unterschiedlicher Bedienelemente und abweichend konzipierter Eingabedialoge führten die Systeme wie erwartet zu deutlichen Unterschieden in der Fahrerbeanspruchung. Auch der Lernverlauf von Fahrern mittleren Alters und von älteren Fahrern wich erheblich voneinander ab. Jüngere Fahrer erreichten deutlich kürzere Bearbeitungszeiten mit beiden Systemen. Auswertungen des Blickverhaltens im Fahrversuch ergaben umfangreiche Datensätze zur visuellen Ablenkung in verschiedenen Fahrbedingungen. Der Kompetenzerhalt nach einigen Monaten war außer in der Gruppe älterer Fahrer fast vollständig. Es war kein Transfer zwischen den deutlich verschiedenen Systemen festzustellen. Die Schätzung von Potenzfunktionsparametern hat sich insgesamt als Methode zur Beschreibung des Kompetenzerwerbs bewährt. In einer weiteren Studie wurde die erste Phase des Kompetenzerwerbs für vier unterschiedliche Navigationssysteme mit der Okklusionsmethode untersucht, die als Bewertungsverfahren der visuellen Beanspruchung durch Fahrerinformationssysteme vorgeschlagen ist. Die Projektstudien leisten damit auch einen Beitrag zur Methodenentwicklung und zur Einschätzung der sicherheitsrelevanten Auswirkungen von Fahrerinformationssystemen.