Sonstige
Filtern
Erscheinungsjahr
- 2013 (99) (entfernen)
Dokumenttyp
- Konferenzveröffentlichung (51)
- Buch (Monographie) (32)
- Wissenschaftlicher Artikel (13)
- Bericht (2)
- Teil eines Buches (Kapitel) (1)
Sprache
- Englisch (54)
- Deutsch (44)
- Mehrsprachig (1)
Schlagworte
- Deutschland (74)
- Germany (73)
- Konferenz (43)
- Conference (42)
- Research report (27)
- Forschungsbericht (26)
- Injury (21)
- Reconstruction (accid) (21)
- Unfallrekonstruktion (21)
- Verletzung (21)
Immediate user self-evacuation is crucial in case of fire in road tunnels. This study investigated the effects of information with or without additional virtual reality (VR) behavioural training on self-evacuation during a simulated emergency situation in a road tunnel. Forty-three participants were randomly assigned to three groups with accumulating preventive training: The control group only filled in questionnaires, the informed group additionally read an information brochure on tunnel safety, and the VR training group received an additional behavioural training in a VR tunnel scenario. One week later, during the test session, all participants conducted a drive through a real road tunnel in which they were confronted with a collision of two vehicles and intense smoke. The informed and the behaviourally trained participants evacuated themselves more reliably from the tunnel than participants of the control group. Trained participants showed better and faster behavioural responses than informed only participants. Interestingly, the few participants in the control group who reacted adequately to the scenario were all female. A 1 year follow-up online questionnaire showed a decrease of safety knowledge, but still the trained group had somewhat more safety relevant knowledge than the two other groups. Information and especially VR behavioural training both seem promising to foster adequate self-evacuation during crisis situations in tunnels, although long term beneficial behavioural effects have to be demonstrated. Measures aiming to improve users/ behaviour should take individual difference such as gender into account.
With an ever rising human life expectancy the share of elderly people in society is constantly rising. This leads to the fact that at the same rate the share of people with age related diseases such as dementia and poor eyesight taking part in traffic will rise and therefore traffic accidents caused by this group of people due to the disease will play an ever greater role. This Situation will be among the future challenges of road safety work. At present this study displays specific characteristics of accidents caused by elderly car drivers (aged 65 or higher) based on the analysis of the German In-Depth Accident Study GIDAS. Herein almost 1000 elderly car drivers were identified as accident participants in the years 2008 to 2011. The focus of this study lies on identifying special types of accidents which are caused by elderly drivers and on characterizing these types with the information gathered on scene and by interviewing the participants. The main evidence analyzed is the knowledge about the accident locality, the trajectories of the participants as well as the reasons for the occurrence of the accidents. Furthermore personal information such as the personal condition before the accident and driving purposes is used to identify patterns of contributing circumstances for accidents caused by elderly traffic participants.
To improve vehicle safety in frontal collisions, the crash compatibility between the colliding vehicles is crucial. Compatibility aims to improve both the self and partner protection properties of vehicles. Although compatibility has received worldwide attention for many years, no final assessment approach has been defined. Within the Frontal Impact and Compatibility Assessment Research (FIMCAR) project, different frontal impact test procedures (offset deformable barrier [ODB] test as currently used for Economic Commission for Europe [ECE] R94, progressive deformable barrier test as proposed by France for a new ECE regulation, moveable deformable barrier test as discussed worldwide, full-width rigid barrier test as used in Federal Motor Vehicle Safety Standard [FMVSS] 208, and full-width deformable barrier test) were analyzed regarding their potential for future frontal impact legislation. The research activities focused on car-to-car frontal impact accidents based on accident investigations involving newer cars. Test procedures were developed with both a crash test program and numerical simulations. The proposal from FIMCAR is to use a full-width test procedure with a deformable element and compatibility metrics in combination with the current offset test as a frontal impact assessment approach that also addresses compatibility. By adding a full-width test to the current ODB test it is possible to better address the issues of structural misalignment and injuries resulting from high acceleration accidents as observed in the current fleet. The estimated benefit ranges from a 5 to 12 percent reduction of fatalities and serious injuries resulting from frontal impact accidents. By using a deformable element in the full-width test, the test conditions are more representative of real-world situations with respect to acceleration pulse, restraint system triggering time, and deformation pattern of the front structure. The test results are therefore expected to better represent real-world performance of the tested car. Furthermore, the assessment of the structural alignment is more robust than in the rigid wall test.
Die temperierte Straße
(2013)
Eine temperierte Straße? Bei genauerer Betrachtung weist die Vision einer temperierten Fahrbahnoberfläche überzeugende Vorteile auf und ist technisch bereits heute umsetzbar, wie eine Reihe von Projekten weltweit belegt. Im Rahmen der vorgestellten Machbarkeitsstudie wurden die Möglichkeiten und Grenzen einer Fahrbahntemperierung untersucht. Unter Berücksichtigung unterschiedlicher Asphalt- und Speicherkonzepte sowie der in Deutschland vorherrschenden geologischen und klimatischen Randbedingungen erfolgte eine Auswertung der Wirksamkeit und Wirtschaftlichkeit eines energetischen Gesamtsystems aus Fahrbahn, Speicher und Gebäude. Die Studie stellt die Rahmenbedingungen für eine Realisierung einer solchen Anlage dar. In vorangegangenen Forschungsvorhaben wurde deutlich, dass sich mit einer Fahrbahnheizung, abgesehen vom volkswirtschaftlichen Nutzen, aus der gesteigerten Verkehrssicherheit nur ein geringer betriebswirtschaftlicher Nutzen aus eingesparten Winterdiensteinsätzen erzielen lässt. Im nächsten Schritt wurde daher der Nutzen einer Kühlung der Fahrbahndecke im Sommer, die sich insbesondere bei Asphaltdeckschichten als vorteilhaft erweist, in die Betrachtung einbezogen. Bei den zugehörigen thermodynamischen Simulationen zeigte sich ein erheblicher Energieüberschuss in der Jahresbilanz. Daher war es nur folgerichtig, für diese Energie mögliche Abnehmer zu suchen. Im Gegensatz zu den erst im Verlauf des Nutzungszeitraums entstehenden Einsparungen aus der Kühlung der Fahrbahnoberfläche können aus einem solchen Verkauf erneuerbarer Energie ganz konkret und kurzfristig Einnahmen generiert werden. Es zeigt sich, dass mit der ganzjährigen Klimatisierung angrenzender Gebäude zwar Einnahmen erzielt werden können, die Wirtschaftlichkeit aber durch die Kosten für die Speicherung bestimmt wird. Letztlich scheint die Umsetzung einer solchen Anlage immer dann wirtschaftlich darstellbar, wenn die geologischen, klimatischen und topografischen Rahmenbedingungen eine effiziente Speicherung der Energie zulassen.
The United Nations Economic Commission for Europe Informal Group on GTR No. 7 Phase 2 are working to define a build level for the BioRID II rear impact (whiplash) crash test dummy that ensures repeatable and reproducible performance in a test procedure that has been proposed for future legislation. This includes the specification of dummy hardware, as well as the development of comprehensive certification procedures for the dummy. This study evaluated whether the dummy build level and certification procedures deliver the desired level of repeatability and reproducibility. A custom-designed laboratory seat was made using the seat base, back, and head restraint from a production car seat to ensure a representative interface with the dummy. The seat back was reinforced for use in multiple tests and the recliner mechanism was replaced by an external spring-damper mechanism. A total of 65 tests were performed with 6 BioRID IIg dummies using the draft GTR No.7 sled pulse and seating procedure. All dummies were subject to the build, maintenance, and certification procedures defined by the Informal Group. The test condition was highly repeatable, with a very repeatable pulse, a well-controlled seat back response, and minimal observed degradation of seat foams. The results showed qualitatively reasonable repeatability and reproducibility for the upper torso and head accelerations, as well as for T1 Fx and upper neck Fx. However, reproducibility was not acceptable for T1 and upper neck Fz or for T1 and upper neck My. The Informal Group has not selected injury or seat assessment criteria for use with BioRID II, so it is not known whether these channels would be used in the regulation. However, the ramping-up behavior of the dummy showed poor reproducibility, which would be expected to affect the reproducibility of dummy measurements in general. Pelvis and spine characteristics were found to significantly influence the dummy measurements for which poor reproducibility was observed. It was also observed that the primary neck response in these tests was flexion, not extension. This correlates well with recent findings from Japan and the United States showing a correlation between neck flexion and injury in accident replication simulations and postmortem human subjects (PMHS) studies, respectively. The present certification tests may not adequately control front cervical spine bumper characteristics, which are important for neck flexion response. The certification sled test also does not include the pelvis and so cannot be used to control pelvis response and does not substantially load the lumbar bumpers and so does not control these parts of the dummy. The stiffness of all spine bumpers and of the pelvis flesh should be much more tightly controlled. It is recommended that a method for certifying the front cervical bumpers should be developed. Recommendations are also made for tighter tolerance on the input parameters for the existing certification tests.
The strong prevalence of human error as a crash causation factor in motorcycle accidents calls for countermeasures that help tackling this issue. Advanced rider assistance systems pursue this goal, providing the riders with support and thus contributing to the prevention of crashes. However, the systems can only enhance riding safety if the riders use them. For this reason, acceptance is a decisive aspect to be considered in the development process of such systems. In order to be able to improve behavioural acceptance, the factors that influence the intention to use the system need to be identified. This paper examines the particularities of motorcycle riding and the characteristics of this user group that should be considered when predicting the acceptance of advanced rider assistance systems. Founded on theories predicting behavioural intention, the acceptance of technologies and the acceptance of driver support systems, a model on the acceptance of advanced rider assistance systems is proposed, including the perceived safety when riding without support, the interface design and the social norm as determinants of the usage intention. Since actual usage cannot be measured in the development stage of the systems, the willingness to have the system installed on the own motorcycle and the willingness to pay for the system are analyzed, constituting relevant conditions that allow for actual usage at a later stage. Its validation with the results from user tests on four advanced rider assistance systems allows confirming the social norm and the interface design as powerful predictors of the acceptance of ARAS, while the extent of perceived safety when riding without support did not have any predictive value in the present study.
Nowadays human-created systems are increasing in complexity due to the interaction of humans and technology. Especially road traffic systems are composed of multitudinous resources (e.g. personnel, vehicles, organizations, etc.), which make it even harder to anticipate the positive and negative effects on safety. One key in achieving a significant reduction of fatalities is seen in driver assistant systems counterbalancing the lack of drivers' capabilities. But the actual outcome of implementing these sophisticated technologies especially on influencing driver's capabilities are yet unknown. Latest research exemplifies an increase of reaction times of drivers in case of dysfunctional driver assistant systems. This research paper applies STAMP/STPA (STAMP = systems-theoretic accident model and processes; STPA = systems-theoretic process analysis) to the German automobile traffic system focusing on the effects of driver assistant systems on drivers. By doing so, the potential hazards caused by technology can be identified.
Teil 1, Informations- und Kommunikationstechniken zur Optimierung des Betriebsdienst-Managements: In vielen Arbeits- und Organisationsprozessen des Straßenbetriebsdienstes werden Informations- und Kommunikationstechnologien (IuK-Technologien) eingesetzt, um Arbeitsabläufe einfacher, besser und sicherer zu gestalten sowie umfassende Daten für die Abrechnung und weitere Planung bereit zu stellen. Die Potenziale der IuK-Technologien werden im Straßenbetriebsdienst häufig nur unvollständig genutzt. Ziel des FE-Vorhabens war die systematische Aufbereitung von Anforderungen und Möglichkeiten der IuK-Technologien. Die Anforderungen des Straßenbetriebsdienstes an den Einsatz der IuK-Technologien berücksichtigen neben der derzeitigen Praxis auch künftige Entwicklungen, die sich beispielsweise aus der Einführung der wirtschaftlichkeitsorientierten Steuerung des Betriebsdienstes ergeben. Damit IuK-Technologien erfolgreich betrieben werden können, ist neben Funktionalität und Qualität der technischen Komponenten auch die Berücksichtigung der organisatorischen und betrieblichen Abläufe im Straßenbetriebsdienst von großer Bedeutung. In den Untersuchungen zur mobilen Sprach- und Datenkommunikation wurde deutlich, dass bei Auslaufen des Analogfunks neben dem Aufbau eigenständiger Digitalfunknetze auch die Nutzung des kommerziellen Mobilfunks in Betracht gezogen werden sollte. Wesentliche Grundlagen für die wirtschaftliche Steuerung sind die automatisierte Einsatzdatenerfassung sowie ein umfassendes Bestandsdatenmanagement, wobei Bestandsobjekte auch mit Hilfe von RFID-Chips identifiziert werden können. Im Winterdienst sollten verstärkt berührungslose Sensoren für die Erfassung von Fahrbahntemperatur und "zustand zum Einsatz kommen. Salzmanagementsysteme ermöglichen u.a. die Überwachung von Streustoffvorräten an nicht besetzten Standorten sowie eine übergeordnete Logistik bei Lieferengpässen. Wichtig sind auch Systeme zur Unterstützung der Fahrer von Winterdienstfahrzeugen, durch die Einsätze anforderungsgerechter und flexibler erfolgen können. Es wurden auch innovative IuK-Technologien analysiert, die große Potentiale für den Straßenbetriebsdienst erkennen lassen. Hierzu zählen die mobile Erfassung des Straßenzustandes für den Winterdienst durch Einsatzfahrzeuge oder Fahrzeuge des Individualverkehrs, alternative Kommunikationswege für die Warnung der Verkehrsteilnehmer vor Arbeitsstellen im Verkehrsraum sowie das autonome Fahren von Absperr- und Vorwarnanhängern, durch das die Gefährdung des Personals im Verkehrsraum deutlich reduziert werden kann. Es besteht jedoch noch erheblicher Forschungs- und Entwicklungsbedarf, um diese Technologien effizient im Straßenbetriebsdienst einzusetzen sowie ihren Nutzen umfassend bewerten zu können. Teil 2, Autonomes Fahren für den Straßenbetriebsdienst: Mitarbeiter des Betriebsdienstes sind in Arbeitsstellen auf Autobahnen enormen Unfallgefahren ausgesetzt. Weiterhin erfordert die Sicherung von Arbeitsstellen kürzerer Dauer (AkD) einen hohen personellen und zeitlichen Aufwand. Das FE-Projekt "Informations- und Kommunikationstechniken zur Optimierung des Betriebsdienst-Managements" zeigte, dass die Anwendung autonomer Fahrzeuge im Betriebsdienst die Gefährdung des Personals im Verkehrsraum reduzieren kann. In Ergänzung dazu wurde der Entwicklungsansatz "Autonomes Fahren für den Straßenbetriebsdienst" konkretisiert. Eine untersuchte Minimallösung beinhaltet ein autonom fahrendes Absperrfahrzeug, welches einem Führungsfahrzeug auf der Autobahn folgt. In einem zweiten Gesamtkonzept ist die Automatisierung einer gesamten Absicherungskolonne mit Absperr- und Vorwarnfahrzeugen incl. der unbemannten Anfahrt zur Autobahn auf nicht öffentlichen Straßen vorgesehen. In der technischen Umsetzung handelt es sich bei den Einsatzszenarien der unbemannten Fahrzeuge um Formationsfahrten oder Folgefahrt-Szenarien auf der Autobahn. Unbemannte Fahrzeuge mit den dargestellten Funktionsweisen können deutliche Sicherheitssteigerungen für Betriebsdienstmitarbeiter bieten. Eine erste Abschätzung ergab, dass rund 70 % der Mitarbeiter, welche in AkD auf Autobahnen beim Aufenthalt in Fahrzeugen verunglücken, durch den Einsatz unbemannter Arbeitsstellensicherung geschützt werden können. Dies entspricht rund der Hälfte der insgesamt bei Unfällen in AkD verunglückten Mitarbeiter. Für die Realisierung unbemannter Sicherungsfahrzeuge sind viele technische Fragestellungen zu klären, insbesondere bezüglich der Prognose und Detektion von Fehlfunktionen. Für den Einsatz der vorgeschlagenen Systeme ist eine allgemeine Genehmigung für den täglichen Betrieb notwendig. Hierzu sind zahlreiche rechtliche Fragestellungen zu beantworten. Somit kann die Implementierung unbemannter Sicherungsfahrzeuge im Betriebsdienst als Pilotprojekt für unbemanntes Fahren im Allgemeinen bzw. in anderen Branchen dienen.
Rollovers continue to be a major source of heavy truck fatalities when compared to other accident modes. Real world rollover accidents are analyzed and two distinct damage patterns are identified. Damage to heavy truck roofs can occur from lateral loading that transitions to vertical roof loading as the vehicle rolls onto its side and then over onto its roof. A second load path can occur when the vehicle has rolled onto its side and furrows into the ground generating large longitudinal friction forces between the roof and ground. A review of the previous literature and various test methodologies are presented. A sled impact test methodology is presented which allows for structural assessment of a heavy truck cab's crashworthiness in both of these loading environments. Two test series are presented using the sled impact test methodology in order to analyze real world truck rollovers using varying impact platen and contact angles. The structural deformation and failure patterns were found to be consistent with damage seen in real world accident vehicles. In each case, a second equivalent truck cab was then reinforced and tested under similar conditions to evaluate the energy management and crush resistance of a stronger cab structure. These structural reinforcements demonstrated a substantial reduction in roof crush and protected the survival space of the occupant compartment. The sled impact test procedure is an effective method for testing the structural performance of a heavy truck cab in a variety of loading scenarios comparable to real world accidents and ascertaining the load and energy load levels in these accident modes.
Die Anforderungen an Brückenbauwerke haben sich in den vergangenen Jahren infolge der steigenden Verkehrszahlen deutlich erhöht. Gleichzeitig hat sich mit der Umstellung der Normen der rechnerische Querkraftwiderstand von Bauteilen ohne Querkraftbewehrung verringert. Daher lässt sich für Brückenbauwerke im Bestand mit Fahrbahnplatten ohne Querkraftbewehrung nach derzeitigen technischen Regeln oft nicht eine ausreichende Querkrafttragfähigkeit nachweisen. Allerdings sind die berechneten Tragfähigkeiten aufgrund einer Unterschätzung der mitwirkenden Plattenbreite konservativ. Der derzeit gültige Ansatz zur Berechnung der Querkrafttragfähigkeit ohne Querkraftbewehrung nach DIN-Fachbericht 102 (2009) wurde anhand einer Querkraftdatenbank kalibriert, die hauptsächlich aus Versuchen an Balken besteht. Bislang wurden nur wenige Versuche zur Querkrafttragfähigkeit von Platten unter punktförmiger Belastung durchgeführt. Im vorliegenden von der Bundesanstalt für Straßenwesen geförderten und am Institut für Massivbau der RWTH Aachen durchgeführten Forschungsvorhaben wurde durch experimentelle und theoretische Untersuchungen das Querkrafttragverhalten von Platten genauer analysiert. Die experimentellen Untersuchungen bestanden aus insgesamt 17 Bauteilversuchen in zwei Versuchsserien. In der ersten Versuchsserie wurde die Fragestellung der sich einstellenden Lastverteilungsbreite bei Platten ohne Querkraftbewehrung im Zustand II untersucht. Hierzu wurde durch Variation der Plattenbreite (0,5 m bis 3,5 m) an Einfeldsystemen gezielt der Übergang von der Balkentragwirkung zur Plattentragwirkung analysiert. Anschließend wurde der Einfluss der Schubschlankheit (2,9 bis 5,4) auf das Querkrafttragverhalten überprüft. In der zweiten Versuchsserie wurde an Kragarmen von zweistegigen Plattenbalken der Einfluss der Vouten sowie des Momenten-Querkraftverhältnisses untersucht. Aufbauend auf den Versuchen der ersten Versuchsserie wurden nichtlineare Finite-Elemente-Berechnungen zur Untersuchung weiterer Einflüsse (z. B. Betonfestigkeit, Längs- und Querbewehrungsgrad, Druckbewehrung, Plattendicke, Stützweite) durchgeführt. Auf Grundlage der durchgeführten theoretischen und experimentellen Untersuchungen wurden abschließend die bestehenden Bemessungsansätze modifiziert und anhand von Versuchen aus der Literatur überprüft.
This study analyses no.39 cases in which n.41 motorcyclists were fatally injured, or 36% of total motorcycle fatalities in Northern Ireland between 2004 and 2010 (n.114). There were n.17 cases (43.6%) where the actions of another vehicle driver caused the collision, in thirteen of these cases the motorcycles had their lights switched on. The remaining n.22 collisions (56.4%) were due to the actions of the motorcyclist. In the approach to the collision scene, there were n.13 cases (31.7%) in which the approach was a right hand bend and in n.8 (19.5%) cases, the approach was a left hand bend. In the remaining n.18 (43.9%) cases, the approach was a straight road. Of the n.17 (41.4%) motorcycles that slid after falling, n.10 (24.4%) fell onto their right side and the remaining n.7 (17.1%) fell onto their left side. The information from this study identifies primary and contributory causes of motorcycle collisions.
The number of injured car occupants decreases constantly. Nevertheless, they account for nearly 50% of all fatalities and about 44% of all seriously injured persons in German traffic accidents. Further reductions of casualties require multiple efforts in all parts of traffic safety. In this paper a detailed analysis of the important pre-hospital rescue phase was done. The basis for future improvements is the knowledge about injury causation of car occupants in combination with other corresponding influence factors. For that reason more than 1.200 severe (AIS3+) injuries of frontal car occupants were analyzed. For the most relevant injuries of car occupants multivariate analysis models were created to predict the probability of these injuries in a real crash scenario. In addition to the collision severity different influence factors like impact direction, seat belt usage, age of the occupant, and gender were analyzed. Furthermore, the models were checked regarding the goodness of fit and all results all results were checked concerning their robustness. The prediction models were created on the basis of 5.000 car accidents. Afterwards, the models were validated using 4.000 different car accidents. The prediction of the probability of severe injuries could be used for different applications in the field of traffic safety. One possibility is the implementation of the models in a tool for the on-the-spot diagnosis. The background for the development of such applications is the fact, that there are only limited diagnostic possibilities available at the accident scene. Nevertheless, the rescue forces have to make essential decisions like the alerting of the necessary medical experts, appropriate treatment, the type of transportation and the choice of an adequate hospital. These decisions quite often decide between life and death or influence the long-term effects of injured persons. At this point, indications of expectable injuries could help enormously. To enable even persons with limited technical knowledge to use the tool, a procedure was developed that facilitates the assumption of the given crash severity. Another important possibility for the application of the prediction models is the use for the qualification of information sent by e-call systems.
Im von der DG Home (CIPS Program) geförderten Projekt "SecMan " Security Manual for Road Infrastructures" wurde ein vierstufiges Verfahren zur Identifikation kritischer Straßeninfrastrukturen, ihre Bewertung hinsichtlich diverser von Menschen verursachter Gefahren sowie die Bestimmung effektiver Schutzmaßnahmen entwickelt. Diese Ergebnisse wurden in einem ganzheitlichen "best-practice" Handbuch zusammen getragen, welches einen trans-nationalen Sicherheitsmanagement-Ansatz für Betreiber und Eigentümer von Straßeninfrastrukturen in Europa ermöglicht. Im Folgenden wird die entwickelte Methodik vorgestellt, ausgehend von der Bewertung der Netzkritikalität über die Attraktivität und Vulnerabilität eines Bauwerks hin zu einer Bewertungsmethodik für die Auswahl geeigneter Schutzmaßnahmen.
The European CASPER (Child Advanced Safety Project for European Roads) project studying car child safety includes a sociological approach in order to have a better understanding of the behaviour of parents driving children under 12 years old. A questionnaire was distributed via the internet in Europe with 998 parents (representing 1638 children) from 22 European countries responding. The results inform on the way parents secure their children during a car trip. Many parents did not control how their children were installed in the child restraint system (CRS). A toddler was more likely to travel into a child seat than an older child was. Regarding misuse situations, an important part of the participants did not think that they could make mistakes when fixing the child seat to the car (26%) or when placing the child into the seat (39%). This leaves an important field of action especially by communication via different media and in the CRS sale outlets.
Aus einer aktuellen BASt-Studie ("Legalbewährung nach Neuerteilung der Fahrerlaubnis") geht hervor, dass eine Fahrerlaubnisentziehung bei mehrfach verkehrsauffälligen Fahrern nicht unbedingt zur Verhaltensänderung führt: Personen, denen der Führerschein wegen Überschreitens der Punktegrenze entzogen wurde, bergen ein doppelt so hohes Risiko, schuldhaft einen Unfall zu verursachen, wie Personen, deren Fahrerlaubnis wegen Alkohol- oder Drogenkonsums entzogen wurde. Eine Interventionsmaßnahme im Rahmen des Punktsystems stellt ein Hilfsangebot dar, das Fahrerlaubnisinhabern die Möglichkeit gibt, ihr riskantes Fahrverhalten mit professioneller Unterstützung langfristig zu verändern, um zukünftig regelkonform am Straßenverkehr teilzunehmen. Eine Interventionsmaßnahme kann damit einen wichtigen Beitrag zur Reduktion des Unfallrisikos von mehrfach verkehrsauffälligen Fahrern und damit zur Erhöhung der Verkehrssicherheit leisten. Für die bisherigen Aufbauseminare für Punkteauffällige (ASP) konnte kein Wirksamkeitsnachweis erbracht werden. Aus wissenschaftlicher Sicht wurde der den Aufbauseminaren zugrunde liegende Moderationsansatz kritisch hinterfragt. So geht aus einem Gutachten über die Qualität der Aufbauseminare hervor, dass Zweifel bestehen, dass das Ziel der Einstellungsänderung verkehrsauffälliger Fahrer mit dem zugrundeliegenden Ansatz erreicht werden kann. Vor diesem Hintergrund wurde die BASt im Rahmen der Reform des Verkehrszentralregisters vom Bundesministerium für Verkehr, Bau und Stadtentwicklung (BMVBS) im Juni 2012 beauftragt, die Grundlagen für ein wissenschaftlich begründetes Konzept für eine neue, wirksame Interventionsmaßnahme (Fahreignungsseminar, FES) für Punkteauffällige vorzulegen. Die Grundlagen zum Fahreignungsseminar wurden in drei Forschungsprojekten erarbeitet. Diese werden im vorliegenden Bericht dargestellt. Teil 1: Optimierung der Interventionsmaßnahmen im Rahmen der Reform des Mehrfachtäter-Punktsystems. Teil 2: Konzeption einer edukativen Teilmaßnahme der Fahreignungsseminare für verkehrsauffällige Kraftfahrer. Teil 3: Entwicklung eines Rahmenlehrplans für den edukativen Teil des im Rahmen der Reform des Punktsystems geplanten Fahreignungsseminars.
Beispielhaft am Begleiteten Fahren wurde eine Methode zur standardisierten Erfassung der Fahrsicherheit im Realverkehr entwickelt. Hierfür wurde eine Fahrstrecke mit einer Fahrdauer von etwa 90 Minuten festgelegt, die eine repräsentative Auswahl von Verkehrsszenarien enthielt, mit denen Fahrer üblicherweise beim Fahren konfrontiert werden. Diese Strecke umfasste Innerortsbereiche sowie Landstraßen- und Autobahnabschnitte. Auf dieser Strecke wurden Referenzdaten von 40 Fahrern erhoben. 26 dieser Fahrer waren zwischen 18 und 22 Jahren alt, davon hatten 17 am Begleiteten Fahren teilgenommen. Das Alter der übrigen 14 Fahrer, die allesamt nicht am Begleiteten Fahren teilgenommen hatten, lag zwischen 23 und 50 Jahren. Während der Fahrten wurden elf Variablen elektronisch im Fahrzeug erfasst (u. a. Fahrgeschwindigkeit, Abstand zum vorausfahrenden Fahrzeug). Diese elektronisch erfassten Daten wurden nach dem System I-TSA (INVENT " Traffic Safety Assessment; Glaser, Waschulewski & Schmid, 2005) ausgewertet und um Papier-und-Bleistift-Tests sowie um Beurteilungen durch den Untersuchungsleiter ergänzt. Insgesamt ergaben sich 18 Skalen. Diese zeigten hohe Reliabilitäten. Die Skalen ermöglichen eine profilartige Darstellung der Fahrsicherheit einzelner Fahrer und von Fahrergruppen, jeweils relativ zu einer Referenzgruppe. In einer Ex-Post-facto-Analyse der gegebenen Stichprobe konnte anhand dieser Skalen zwischen Fahrern, die am Begleiteten Fahren teilgenommen hatten und denen, die dies nicht getan hatten, unterschieden werden. Damit steht ein umfassendes, auf einer psychometrischen Methodik basierendes Testsystem zur Verfügung, das auf einer standardisierten Fahrprobe im Straßenverkehr basiert. Dieses System kann, ohne aufwändige und substanzielle Änderungen, auch für andere verkehrsmedizinische und verkehrspsychologische Fragestellungen eingesetzt werden.
Trauma management (TM) covers two types of medical treatment: the initial one provided by Emergency Medical Services (EMS) and a further one provided by permanent medical facilities. There is a consensus in the professional literature that to reduce the severity and the number of road crash victims, the TM system should provide rapid and adequate initial care of injury, combined with sufficient further treatment at a hospital or trauma centre. Recognizing the important role of TM for reducing road crash injury outcome, it was decided, within the EU funded SafetyNet project, to develop road safety performance indicators (SPIs) which would characterize the level of TM systems" performance in European countries and enable country comparisons. The concept of TM SPIs was developed based on a literature study of performance indicators in TM, a survey of available practices in Europe and data availability examinations. A set of TM SPIs was introduced including 14 indicators which characterize five issues such as: availability of EMS stations; availability and composition of EMS medical staff; availability and composition of EMS transportation units; characteristics of the EMS response time, and availability of trauma beds in permanent medical facilities. Basic information on the TM systems was collected in close cooperation with the national expert group. A dataset with TM SPIs for 21 countries was created. It was demonstrated that the countries can be compared using selected TM SPIs. Moreover, a more general comparison of the TM systems' performance in the countries is possible, using multiple ranking and statistical weighting techniques. By both methods, final estimates were received enabling the recognition of groups of countries with similar levels of the TM system's performance. The results of various trials were consistent as to the recognition of countries with high or low level of the TM systems" performance, where in grouping countries with intermediate levels of the TM system's performance some differences were observed. The SafetyNet project's practice demonstrated that data collection for estimating TM SPIs is not an easy task but is realizable for the majority of countries. The TM SPIs" message is currently limited to the availability of trauma care services. Further development of the TM SPIs should focus on characteristics of actual treatment supplied, based on combined police and medical road crash related databases.
Fahranfänger werden im Rahmen spezifischer, international unterschiedlich ausgestalteter Vorbereitungssysteme auf die motorisierte Verkehrsteilnahme vorbereitet. Diese Systeme sind historisch gewachsen und von länderspezifischen ökonomischen, infrastrukturellen, rechtlichen und kulturellen Gegebenheiten geprägt. Für eine vergleichende Systembetrachtung wurde unter Rückgriff auf forschungsmethodische Ansätze der Vergleichenden Politikwissenschaft und lehr-lerntheoretische Grundlagen ein begrifflicher Rahmen erarbeitet, der eine Systembeschreibung und -analyse anhand funktional unterscheidbarer Lehr-Lernformen und Prüfungsformen ermöglicht. Im Bericht werden die Systeme der Fahranfängervorbereitung von 44 Ländern dargestellt. Die Beschreibungen basieren auf Befragungen von Experten verschiedener Institutionen (Verkehrsministerien, Fahrlehrerverbände, Prüforganisationen) sowie auf Literatur- und Internetrecherchen. Bei der Länderauswahl wurden " neben europäischen Ländern mit einer traditionell stark ausgeprägten formalen Fahrschulausbildung " auch "Graduated Driver Licensing"-Systeme berücksichtigt, die vor allem in der englischsprachigen Welt in Übersee anzutreffen sind. Sie sind durch die Gewährleistung eines umfangreichen Fahrerfahrungsaufbaus unter niedrigen Risikobedingungen durch Begleitetes Fahren ("supervised driving") vor dem Beginn des selbständigen Fahrens und protektive Sonderregelungen für Fahranfänger beim weiteren Fahrerfahrungsaufbau in der Anfangsphase des selbständigen Fahrens gekennzeichnet. Die Ergebnisse ermöglichen einen detaillierten Einblick in die länderspezifische Ausgestaltung der Fahranfängervorbereitung mit den Bestandteilen der formalen Fahrausbildung in Fahrschulen, informeller Lehr-Lernformen wie des Begleiteten Fahrenlernens, zu absolvierender Fahrerlaubnisprüfungen sowie rechtlicher Rahmenbedingungen und qualitätssichernder Maßnahmen. Vor dem Hintergrund von Evaluationsbefunden zur Sicherheitswirksamkeit wird die Funktionalität von Systembestandteilen und -architekturen diskutiert.
Learner drivers are readied for their participation in motorised transport within the framework of specific, internationally-diverse preparation systems. These systems are historically developed and are characterised by country-specific economic, infrastructural, legal and cultural circumstances. With the aid of functionally-distinguishable teaching and learning methods as well as testing methods, a conceptual framework was created whilst drawing upon research-methodological approaches of comparative political science as well as teaching and learning principles that facilitated a description and analysis of the systems for a comparative observation to be performed. The systems for the preparation of learner drivers in 44 countries are illustrated in the report. The descriptions are based upon surveys of experts from various institutions (ministries of transport, driving instructor associations, testing organisations) as well as upon literary and Internet research. Alongside European countries with a traditional formal driver training, \"Graduated Driver Licensing\" systems that are primarily encountered in English-speaking countries were also taken into account when selecting the countries. They are characterised by the guarantee of gaining comprehensive driving experience under reduced risk conditions in the form of supervised driving prior to the start of independent driving as well as protective special rules for learner drivers whilst gaining further driving experience during the initial phase of independent driving. The results enable a detailed insight into the country-specific structure of learner driver preparation with the components of the formal driver training in driving schools, informal teaching and learning methods such as supervised driving, the driving tests that must be successfully completed as well as legal frameworks and quality assurance measures. The functionality of system components and architectures shall be discussed against the backdrop of evaluation findings regarding the effectiveness in terms of safety.
A series of drop tests and vehicle tests with the adult head impactor according to Regulation (EC) 631/2009 and drop tests with the phantom head impactor according to UN Regulation No. 43 have been carried out by the German Federal Highway Research Institute (BASt) on behalf of the German Federal Ministry of Transport, Building and Urban Development (BMVBS). Aim of the test series was to study the injury risk for vulnerable road users, especially pedestrians, in case of being impacted by a motor vehicle in a way described within the European Regulations (EC) 78/2009 and (EC) 631/2009. Furthermore, the applicability of the phantom head drop test described in UN Regulation No. 43 for plastic glazing should be investigated. In total, 30 drop tests, thereof 18 with the adult head impactor and 12 with the phantom head impactor, and 49 vehicle tests with the adult head impactor were carried out on panes of laminated safety glass (VSG), polycarbonate (PC) and laminated polycarbonate (L-PC). The influence of parameters such as the particular material properties, test point locations, fixations, ambient conditions (temperature and impact angle) was investigated in detail. In general, higher values of the Head Injury Criterion (HIC) were observed in tests on polycarbonate glazing. As the HIC is the current criterion for the assessment of head injury risk, polycarbonate glazing has to be seen as more injurious in terms of vulnerable road user protection. In addition, the significantly higher rebound of the head observed in tests with polycarbonate glazing is suspected to lead to higher neck loads and may also cause higher injury risks in secondary impacts of vulnerable road users. However, as in all tests with PC glazing no damage of the panes was observed, the risk of skin cut injuries may be expected to be reduced significantly. The performed test series give no indication for the test procedure prescribed in UN Regulation No. 43 as a methodology to approve glass windscreen not being feasible for polycarbonate glazing, as all PC panes tested fulfilled the UN R 43 requirements. The performance of the windscreen area will not be relevant for vehicle type approval according to the upcoming UN Regulation for pedestrian protection. However, it is recommended that pedestrian protection being considered for plastic windscreens to ensure at least the same level of protection as glass windscreens.