Sonstige
Filtern
Erscheinungsjahr
Dokumenttyp
- Konferenzveröffentlichung (64)
- Buch (Monographie) (26)
- Bericht (1)
- Arbeitspapier (1)
Schlagworte
- Analyse (math) (92) (entfernen)
Institut
In this study, the mean profile depth (MPD) that expresses roughness of road pavements was calculated using the road survey equipment vehicle and the calculated MPD was compared with the real number of traffic accidents. The analysis method used in this study was to classify the appropriate clustering in relation to traffic accidents using the K-means clustering and to compare this with the presence of traffic accidents via the MPDs to derive the result. K-means clustering was used in the analysis method and four clusters were found using the clustering analysis results. The center of each cluster was 0.627, 0.850, 1.118, and 1.237, respectively. The result of this study is expected to be utilized as foundational research in the traffic safety area.
Powered Two Wheeler (Motorcycle) crashes are overrepresented in EU, England, and United States casualty statistics for both fatal and serious injuries. While regional geographic differences are evident for motorcycle size, type, and engine displacement, the casualty statistics consistently indicate significantly higher injury rates for all motorcycle riders when compared to car occupants. Accident analysis and reconstruction of these motorcycle crashes is a necessary process to gain further understanding of potential injury mitigation strategies. This paper focuses on the analysis of the rider post impact trajectory in the immediate moments following a crash. The rider and motorcycle, while loosely coupled by seating position leading up to a crash, quickly decouple as the crash forces develop. As a result, the rider moves relative to the motorcycle and relative to the collision partner. This movement, or trajectory, is primarily influenced by the type and configuration of the impact, the type and configuration of the motorcycle and collision partner, and the speeds involved. Understanding the rider's post impact trajectory will assist in the development of injury mitigation strategies. Both the free flight trajectory of the rider and the rider's trajectory as influenced by interaction with the motorcycle and collision partner are examined. Rider trajectories in full scale crash testing and real world motorcycle crashes are both studied and presented. The resulting physical evidence that can be observed by an accident analyst is discussed. The application of projectile motion physics is analyzed and the necessary input parameters, such as initial launch angle, are studied. This study will assist in understanding the post-impact dynamics of a motorcyclist, and will provide useful information to analysts evaluating real world crashes.
Cyclists are more likely to be injured in fatal crashes than motorised vehicles. To gain detailed and precise behavioural data of road users, i.e. trajectories, a measuring campaign was conducted. Therefore, a black-spot for accidents with cyclists in Berlin, Germany was selected. The traffic has been detected by a fully automated traffic video analysis system continuously for twelve hours. The video surveillance system is capable of automatically extracting trajectories, classifying road user types and precise determining and positioning of conflicts and accidents. Additionally, pre-conflict and pre-accident situations could be analysed to provide further in-depth understanding of accident causation. The evaluation of the measuring campaign comprised the investigation of traffic parameters, e.g. traffic flow, as well as traffic-safety related parameters based on Surrogate Safety Measures (SSM). Furthermore, the spatial and temporal distributions of conflicts involving cyclists were determined. As a result, three possible conflict clusters could be identified, of which one cluster could be confirmed by detailed video analysis, showing conflicts caused by right turning vehicles.
Car occupants have a high level of mortality in road accidents, since passenger cars are the prevalent mode of transport. In 2013, car occupant fatalities accounted for 45% of all road accident fatalities in the EU. The objective of this research is the analysis of basic road safety parameters related to car occupants in the European countries over a period of 10 years (2004-2013), through the exploitation of the EU CARE database with disaggregate data on road accidents. Data from the EU Injury Database for the period 2005 - 2008 are used to identify injury patterns, and additional insight into accident causation for car occupants is offered through the use of in-depth accident data from the EC SafetyNet project Accident Causation System (SNACS). The results of the analysis allow for a better understanding of the car occupants' safety situation in Europe, thus providing useful support to decision makers working for the improvement of road safety level in Europe.
In most of developed countries, the progress made in passive safety during the last three decades allowed to drastically reduce the number of killed and severely injured especially for occupants of passenger cars. This reduction is mainly observed for frontal impacts for which the AIS3+ injuries has been reduced about 52% for drivers and 38% for front passengers. The stiffening of the cars' structure coupled with the generalization of airbags and the improvement of the seatbelt restraint (load limiter, pretension, etc.) allowed to protect vital body regions such as head, neck and thorax. However, the abdomen did not take advantage with so much success of this progress. The objective of this study is to draw up an inventory on the abdominal injuries of the belted car occupants involved in frontal impact, to present adapted counter-measures and to assess their potential effectiveness. In the first part the stakes corresponding to the abdominal injuries will be defined according to types of impact, seat location, occupants' age and type of injured organs. Then, we shall focus on the abdominal injury risk curves for adults involved in frontal impact and on the comparisons of the average risks according to the seat location. In the second part we will list counter-measures and we shall calculate their effectiveness. The method of case control will be used in order to estimate odds ratio, comparing two samples, given by occupants having or not having the studied safety system. For this study, two type of data sources are used: national road injured accident census and retrospective in-depth accident data collection. Abdominal injuries are mainly observed in frontal impact (52%). Fatal or severe abdominal occupant- injuries are observed at least in 27% of cases, ranking this body region as the most injured just after the thorax (51%). In spite of a twice lower occupation rate in the back seats compared to the front seats, the number of persons sustaining abdominal injuries at the rear place is higher than in the front place. In recent cars, the risk of having a serious or fatal abdominal injury in a frontal impact is 1.6% for the driver, 3.6% for the front passenger and 6.3% for the rear occupants. The most frequently hurt organs are the small intestine (17%), the spleen (16%) and the liver (13%). The most common countermeasures have a good efficiency in the reduction of the abdominal injuries for the adults: the stiffness of the structure of the seats allows decreasing the abdominal injury risk from 54% (driver) to 60% (front occupant), the seatbelt pretensioners decrease also this risk from 90% (driver) to 83% (front passenger).
Still correlated with high mortality rates in traffic accidents traumatic aortic ruptures were frequently detected in unprotected car occupants in the early years. This biomechanical analysis investigates the different kinds of injury mechanisms leading to traumatic aortic injuries in todays traffic accidents and how the way of traffic participation affects the frequency of those injuries over the years. Based on GIDAS reported traffic accidents from 1973 to 2014 are analyzed. Results show that traumatic aortic injuries are mainly observed in high-speed accidents with high body deceleration and direct load force to the chest. Mostly chest compression is responsible for the load direction to the cardiac vessels. The main observed load vector is from caudal-ventral and from ventral solely, but also force impact from left and right side and in roll-over events with chest compression lead to traumatic aortic injuries. Classically, the injury appeares at the junction between the well-fixed aortic arch and the pars decendens following a kind of a scoop mechanism, a few cases with a hyperflexion mechanism are also described. In our analysis the deceleration effect alone never led to an aortic rupture. Comparing the past 40 years aortic injuries shift from unprotected car occupants to today's unprotected vulnerable road users like pedestrians, cyclists and motorcyclists. Still the accident characteristics are linked with chest compression force under high speed impact, no seatbelt and direct body impact.
To elucidate the risk of pedestrians, bicycle and motorbike users, data of two accident research units from 1999 to 2014 were analysed in regard to demographic data, collision details, preclinical and clinical data using SPSS. 14.295 injured vulnerable road users were included. 92 out of 3610 pedestrians ("P", 2.5%), 90 out of 8307 bicyclists ("B", 1.1%) and 115 out of 4094 motorcycle users ("M", 2.8%) were diagnosed with spinal fractures. Thoracic fractures were most frequent ahead of lumbar and cervical fractures. Car collisions were most frequent mechanism (68, 62 and 36%). MAIS was 3.8, 2.8 and 3.2 for P, B and A with ISS 32, 16 and 23. AIS-head was 2.2, 1.3 and 1.5). Vulnerable road users are at significant risk for spine fractures. These are often associated with severe additional injuries, e.g. the head and a very high overall trauma severity (polytrauma).
While cyclists and pedestrians are known to be at significant risk for severe injuries when exposed to road traffic accidents (RTAs) involving trucks, little is known about RTA injury risk for truck drivers. The objective of this study is to analyze the injury severity in truck drivers following RTAs. Between 1999 and 2008 the Hannover Medical School Accident Research Unit prospectively documented 43,000 RTAs involving 582 trucks. Injury severity including the abbreviated injury scale (AIS) and the maximum abbreviated injury scale (MAIS) were analyzed. Technical parameters (e.g. delta-v, direction of impact), the location of accident, and its dependency on the road type were also taken into consideration. The results show that the safety of truck drivers is assured by their vehicles, the consequence being that the risk of becoming injured is likely to be low. However, the legs especially are at high risk for severe injuries during RTAs. This probability increases in the instance of a collision with another truck. Nevertheless, in RTAs involving trucks and regular passenger vehicles, the other party is in higher risk of injury.
Motorcycle crashes in Austria: Analysis of causes and contributing factors based on in-depth data
(2017)
From CEDATU, the in-depth accident database run by the Vehicle Safety Institute at Graz University of Technology, a representative sample of 101 crashes involving at least one motorcycle was selected. The analysis focused on causes for crashes as well as on contributing factors, but also included parameters of road, riders and vehicles. Own riding speed and "unexpectable action by another road user" were the most frequent causes for accidents. Inappropriate safety distance or delayed reaction were frequent, both as causation factors and as contributing factors. Infrastructure issues never cause an accident, but they are very frequent as contributing factors; road geometry and road guidance are by far most frequent among these. This paper also discusses accidents by type and other parameters (e.g. injury severity by body region, collision speed, age and others), and compares accident causes to previous studies as well as the police reported accident statistics.
Millions of kilometers are driven and recorded by car manufacturers and researchers every year to gather information about realistic traffic situations. The focus of these studies is often the recording of critical situations to create test scenarios for the development of new systems before introducing them into the market. This paper shows a novel Analysis and Investigation Method for All Traffic Scenarios (AIMATS) based on real traffic scenes. It also shows how to get detailed information about speeds, trajectories and behavior of all participants without driving thousands of kilometers at the example of conflict situations with animals. Basis of the AIMATS is the identification of the most relevant locations as "Points of Interest" (POI), the recording of the critical situations and their "base lines" at these POI. This paper presents a new method to identify critical scenarios involving both vehicles and animals as well as preliminary results of a study done in Saxony using this new method.
Interdisciplinary accident research and research projects of AARU Audi Accident Research Unit
(2017)
AARU (Audi Accident Research Unit) is an interdisciplinary research project of the University Hospital Regensburg in cooperation with AUDI AG. Specific objective is to comprehend the respective accident scenario and retrieve generally applicable findings as to technical, medical and psychological processes. In order to prevent traffic accidents and to alleviate vehicle accident consequences, postulates of general traffic safety, human-machine interaction, technical design and function of new vehicles and occupant as well as third party protection shall be inferred from these findings. Specifically, each accident with new Audi, Lamborghini and Ducati vehicles involved is analyzed interdisciplinary, discussed in a case meeting and anonymously documented with more than 2,000 parameters. The database is continually used for solving safety relevant issues. Parallel to accident analysis, research projects are performed in the fields medicine, psychology and engineering in order to gain comprehensive insight and identify potential additional areas of activity of accident research.
Ziel des Forschungsprojektes war die Erarbeitung eines webbasierten Verfahrens für die Verkehrssicherheitsarbeit, welches dem Anwender bei der Bearbeitung von Unfallhäufungen potenziell geeignete Maßnahmen in Abhängigkeit der örtlichen Randbedingungen vorschlägt, deren Sicherheitswirkung abschätzt sowie die Möglichkeit bietet, die Maßnahmenwirkung in einer retroperspektiven Betrachtung zu evaluieren. Dabei stellt das Verfahren eine Weiterentwicklung und Ergänzung des Merkblatts "Auswertung von Straßenverkehrsunfällen, Teil 2: Maßnahmen gegen Unfallhäufungen" (FGSV 2002) dar. Grundgerüst der Maßnahmensammlung bilden neben dem Merkblatt der FGSV (2002) aktuelle Erkenntnisse verschiedener Forschungsarbeiten (SPAHN 2012, GERLACH et al. 2009, MAIER et al. 2010, u. w.) zu Maßnahmen gegen Unfallhäufungen, die einer Prüfung und Kategorisierung unterzogen wurden. Der Hauptbestandteil des webbasierten Verfahrens umfasst Schritte zur Unfallanalyse, Maßnahmenfindung und Wirksamkeitsprüfung nach dem "Merkblatt zur örtlichen Unfalluntersuchung in Unfallkommissionen " M UKo" (FGSV 2012). Mit der Übermittlung der Unfallinformationen zu Unfallhäufungen aus den EDV-Systemen der Unfalldatenhaltung in das Programm ist eine spezifische Bearbeitung von Unfallhäufungen möglich. Darüber hinaus wird die Möglichkeit von Rangfolgebildungen zur zielgerichteten Priorisierung von Arbeitsprogrammen angeboten. Die Vorschläge geeigneter Maßnahmen zur Bekämpfung einer Unfallhäufung stuetzen sich im Verfahren auf die Analyse typischer Konfliktsituationen, welche aus den Unfalldatensätzen bestimmt werden. Zur Überprüfung der Angemessenheit und Durchsetzbarkeit von Maßnahmen (-paketen) steht dem Anwender eine Abschätzung des Nutzen-Kosten-Verhältnisses auf Basis des fallbezogenen Unfallgeschehens zur Verfügung. Die kontinuierliche Anwendung des Verfahrens erlaubt dem Nutzer die Dokumentation der Arbeitsschritte. Diese beinhaltet über die Umsetzungskontrolle hinaus wiederum eine fallbezogene Wirksamkeitsprüfung (Evaluierung) der realisierten Maßnahmen. Die stetige Aktualisierung der Maßnahmen und ihrer Kenngrößen (u. a. Wirkungsgrad, Kosten) stellt einen wesentlichen Bestandteil des webbasierten Verfahrens dar, um einen zielorientierten Beitrag zur Bekämpfung von Unfallhäufungen zu leisten.
Ziel des Forschungsvorhabens war es zu untersuchen, ob in verschiedenen Prüfstellen mit dem Walzsektor-Verdichtungsgerät hergestellte Asphalt-Probeplatten gleiche Eigenschaften aufweisen, damit z.B. verträgliche Ergebnisse für Performance-Prüfungen ermittelt werden können. Dazu wurde in 12 Prüfstellen ein Verfahrens-Audit durchgeführt, um eine einheitliche Vorgehensweise bei der Herstellung dieser Platten zu gewährleisten. Anschließend wurden aus verschiedenen Asphaltvarianten WSV-Platten hergestellt und an daraus gewonnenen Probekörpern umfangreiche Performance-Prüfungen durchgeführt. Die ermittelten Ergebnisse zeigen, dass es möglich ist WSV-Platten mit verträglicher Raumdichte in unterschiedlichen WSV-Geräten sowie verschiedenen Prüfstellen herzustellen. Die Ergebnisse der Spurbildungs-, Druck-Schwell- und Zugversuche haben gezeigt, dass die WSV-Platten trotz ähnlicher Raumdichten nicht zwangsläufig verträgliche Ergebnisse im Versuch aufweisen und sich daher in verschiedenen Prüfstellen keine vergleichbaren Ergebnisse für diese Versuche ermitteln lassen. Lediglich bei den Abkühl- und Spaltzug-Schwellversuchen konnten verträgliche Ergebnisse erzielt werden. Für keine der ermittelten Kenngrößen der Performance-Prüfungen ließen sich Zusammenhänge mit der Raumdichte ermitteln. Somit lässt sich die Größe der Ergebnisse bei den Versuchen nicht auf unterschiedliche Größen der Raumdichten der Probekörper zurückführen. Da sich trotz geringer Unterschiede in den Raumdichten nur in ausgewählten Performance-Untersuchungen Unterschiede zeigen, ist davon auszugehen, dass die Streuungen in den Performance-Untersuchungen vornehmlich auf die Sensitivität dieser Versuche zurückzuführen sind. Das Verfahren zur Herstellung von Probekörpern für Performance-Prüfungen aus WSV-Platten scheint aufgrund der Gesamtheit der ermittelten Kenngrößen (Raumdichte, etc.), deren Aussehen, den Erkenntnissen aus dem Verfahrensaudit sowie der Performance-Prüfungen das richtige Verfahren zu sein.
SEEKING is looking for answers regarding electric powered bicycles and their relation to traffic safety issues. Does a cyclist need "E"? Is it as risky as riding a moped or are E-bikes creating conflicts with other cyclists? The project described herein, funded by the Austrian Ministry of Transport, has the aim of seeking answers to these hot topics. The SEEKING-team shows an in-depth investigation of vehicle dynamic sensing, together with subjective feedback of test riders to detect similarities and differences between conventional cycling and E-biking. Following an overview on the international status quo, measurement runs and their analyses are performed to find a set of preventative measures to make (E-)biking safer. A specific focus is the detection of curve handling, stopping and acceleration phases as well as conflict studies on course-based test rides and "real world" tests on cycling paths (naturalistic riding).
In general the passive safety capability is much greater in newer versus older cars due to the stiff compartment preventing intrusion in severe collisions. However, the stiffer structure which increases the deceleration can lead to a change in injury patterns. In order to analyse possible injury mechanisms for thoracic and lumbar spine injuries, data from the German Inâ€Depth Accident Study (GIDAS) were used in this study. A twoâ€step approach of statistical and caseâ€byâ€case analysis was applied for this investigation. In total 4,289 collisions were selected involving 8,844 vehicles, 5,765 injured persons and 9,468 coded injuries. Thoracic and lumbar spine injuries such as burst, compression or dislocation fractures as well as soft tissue injuries were found to occur in frontal impacts even without intrusion to the passenger compartment. If a MAIS 2+ injury occurred, in 15% of the cases a thoracic and/or lumbar spine injury is included. Considering AIS 2+ thoracic and lumbar spine, most injuries were fractures and occurred in the lumbar spine area. From the case by case analyses it can be concluded that lumbar spine fractures occur in accidents without the engagement of longitudinals, lateral loading to the occupant and/or very severe accidents with MAIS being much higher than the spine AIS.
Die Behandlungskosten von Unfallverletzten werden herkömmlich durch Multiplikation der durchschnittlichen Krankenhaus-Verweildauer mit dem vollpauschalierten und für alle Patienten gleichen Krankenhaus-Tagessatz ermittelt. Zielsetzung der vorliegenden Untersuchung ist es, den tatsächlichen Leistungsaufwand für die Gruppe der Unfallverletzten differenzierter zu erfassen, und zwar durch Addition von Einzelleistungen, die den Input für die stationäre Behandlung darstellen. Eine solche fallbezogene Kostenkalkulation wurde in ausgewählten Krankenhäusern für alle straßenverkehrsunfallverletzen Patienten des Jahres 1989 vorgenommen. Für Unfallverletzte in ambulanter Behandlung ergeben sich durchschnittliche Fallkosten in Höhe von 244 DM. Für die 5 häufigsten Einzeldiagnosen wurden folgende Werte ermittelt. 1. Prellungen der unteren Extremitäten: DM 287 je Patient. 2. Verstauchungen und Zerrungen im Rückenbereich: DM 149 je Patient. 3. Prellungen des Kopfes und des Halses: DM 326 je Patient. 4. Prellungen der oberen Extremitäten: DM 196 je Patient. Für Unfallverletzte in stationärer Behandlung ergeben sich durchschnittliche Fallkosten in Höhe von DM 4.824. Die Kosten liegen bei der Hälfte aller stationär behandelten Patienten unterhalb von DM 2.000. Bei 37 Prozent der Verletzten belaufen sie sich auf einen Betrag zwischen DM 2.000 und DM 7.000, wohingegen 13 Prozent der Fälle eine Behandlung benötigte die mehr als DM 10.000 an Kosten verursachte. Betrachtet man die Kosten der 10 häufigsten Einzeldiagnosen, so lassen sich zwei Gruppen bilden. Gehirnerschütterungen, Prellungen und Verstauchungen verursachten Kosten von weniger als der Hälfte des Durchschnittswertes von DM 4.824, wogegen für Frakturen als zweiter Gruppe weit darüber liegende Beträge errechnet wurden. Die Behandlungskosten von Unfallverletzungen mit Todesfolge liegen aufgrund der Verletzungsschwere bei DM 17.246 im Durchschnitt. Die Ergebnisse zeigen, dass die durchschnittlichen Behandlungskosten von Unfallverletzten in Akutkrankenhäusern in etwa den durchschnittlichen Behandlungskosten aller Patienten in Akutkrankenhäusern entsprechen.
Ziel der Untersuchung war die Findung von Grundlagen, die eine Beurteilung des Rettungsdienstes im Hinblick auf seine Effizienz ermöglichen. Für die Durchführung der Effizienzanalyse wurde ein Messkonzept entwickelt, mit dessen Hilfe Input und Output des Systems "Rettungsdienst" erfasst und mit Hilfe von Kenngrößen einer vergleichenden Analyse unterzogen werden konnten. Mit der Analyse des Inputs wurden alle im Rettungsdienst eingesetzten Faktoren mengen- und wertmäßig erfasst sowie deren Kombination durch Analyse der Aufbau- und Ablauforganisation ermittelt. Als wesentliche Grundlage einer Kostenanalyse diente eine vollständige und detaillierte Kostenrechnung. Die Analyse, die zum Aufbau eines Kenngrößensystems erfolgt, wurde für ein konkretes Untersuchungsgebiet vorgenommen. Auf der Outputseite wird ein erheblicher Informationsmangel im Hinblick auf die Einsatzqualität festgestellt. Gefordert wird eine einheitliche Dokumentation wesentlicher Einsatzmerkmale, die eindeutige Rückschlüsse auf das Einsatzgeschehen zulässt.
Teil 1: In der Verkehrssicherheitsforschung können Sicherheitswirkungen zumeist nicht im (Labor)experiment sondern nur durch Feldversuche, die einem Experiment ähnlich anzulegen sind, erfasst werden. In diesem Zusammenhang spricht man von einem Quasi-Experimentellen-Design. Da sich bei solchen Quasi-Experimenten immer die Frage stellt, ob die gemessenen Änderungen maßnahmebedingt sind oder auf andere Einflüsse zurückgeführt werden können, werden verschiedene Gefahrenquellen benannt und mit Beispielen belegt, die die Gültigkeit der Ergebnisse von Wirksamkeitsuntersuchungen beeinträchtigen können. Es werden darüber hinaus eine Reihe wichtiger Quasi-Experimenteller-Designs dargestellt, die Vor- und Nachteile der Designs diskutiert und Hinweise auf mögliche Einsatzfelder gegeben. Um die Qualität der Ergebnisse von Wirksamkeitsuntersuchungen zu verbessern, wird vorgeschlagen, mehrere Erhebungen mittels ein und derselben Untersuchungsanordnung zugleich an mehreren Orten oder an mehreren Untersuchungsgruppen durchzuführen. Es werden mehrere simultane Untersuchungsdesigns vorgestellt und Einsatzbereiche erläutert. Teil 2: Simultane Wirksamkeitsuntersuchungen von Maßnahmen zur Hebung der Verkehrssicherheit erfordern häufig statistische Methoden zur Analyse von Kennzahlen, die auf andere Kennzahlen bezogen sind. Diese bezogenen Kennzahlen bezeichnet man als Risikogrößen. Es werden Methoden vorgestellt und diskutiert, die eingesetzt werden können, wenn entweder die Bezugsgrößen fest oder stochastisch sind.
Ziel der beschriebenen Untersuchung ist die Ergründung streckencharakteristischer Merkmale bei lokalen Häufungen überwiegend fahrdynamisch begründeter Unfälle auf einbahnigen Außerortsstraßen sowie die Erarbeitung geeigneter Abhilfemaßnahmen. Es wurden Streckenabschnitte mit Unfallhäufungsstellen in Rheinland-Pfalz, Hessen, Saarland und Baden-Württemberg ausgewählt. Auf 58 Untersuchungsstrecken wurde das Geschwindigkeitsverhalten und die streckencharakteristische Geschwindigkeit durch Geschwindigkeitsprofile mit Hilfe von Messfahrten untersucht. Die Streckencharakteristika wurden nach quantifizierbaren Merkmalen wie Kurvigkeit und Krümmungsradien sowie nach subjektiven Beurteilungskriterien aufgeschlüsselt. Unfallhäufungsbereiche wurden durch Beschreibungsmerkmale gekennzeichnet, die den kombinierten Einfluss der Trassierungselemente, der Ausstattung und des Umfeldes erfassten. Die Versuche, quantitative Zusammenhänge zwischen Unfallkennzahlen und einzelnen streckencharakteristischen Merkmalen herzustellen, misslangen. Als weitaus häufigstes Merkmal innerhalb der Unfallhäufungsbereiche zeigte sich eine lokale Steigerung der Kurvigkeit in einer bereits kurvigen Umgebung. An zweiter Stelle der Häufigkeit steht die Mitwirkung von Querneigungs- und Fahrbahndeckenmängeln. Die Autoren stellen fest, dass die heutigen Richtlinien zur Linienführung von Straßen (RAS-L-1) keine ausreichenden Kriterien enthalten, um die häufigste festgestellte Unfallursache zu vermeiden, die darin zu sehen ist, dass innerhalb kurviger Strecken Einzelkurven mit größerer Richtungsänderung und/oder etwas kleinem Krümmungsradius auftreten. Hieraus wird die Notwendigkeit einer entsprechenden Überarbeitung der Richtlinie abgeleitet.
Auf der Basis einer umfangreichen Literaturanalyse, die zu dem Ergebnis kommt, dass trotz einer großen Zahl häufig untersuchter Straßenparameter ein verlässliches Modell zur Geschwindigkeitsprognose noch nicht existiert, resultierte ein empirischer Untersuchungsansatz, in dem bei Versuchsfahrten das Blickverhalten und die Geschwindigkeitswahl von Versuchspersonen gleichzeitig erhoben und quantitativ erfassten Merkmalen des Straßenraums gegenübergestellt wurde. Durch die Untersuchung wurden bisherige Erkenntnisse über Gestaltungsanforderungen an Straße und Straßenumfeld durch die Zuordnungen zur Straßensituation und Geschwindigkeitsregulation bestätigt. Trotz einer starken Streuung erfasster Einzelwerte ließen sich qualitative Reaktionen zwischen den Untersuchungsbereichen Geschwindigkeit, Straßenraum und Blickverhalten feststellen, wobei korrelative Zusammenhänge jedoch kaum erkennbar wurden.