Sonstige
Filtern
Erscheinungsjahr
Dokumenttyp
- Konferenzveröffentlichung (16)
- Buch (Monographie) (12)
- Wissenschaftlicher Artikel (9)
- Teil eines Buches (Kapitel) (1)
- Bericht (1)
Schlagworte
- Benutzung (39) (entfernen)
Institut
- Sonstige (39) (entfernen)
An increased use of bicycles comes along with an increased number of bicycle accidents. Bicycle accidents are more frequent than recorded by the police. To evaluate the real number of bicycle accidents during 12 months in Münster, Germany, injuries were collected by the Police and in each emergency unit anonymously. 2,153 patients had to be treated in a hospital, nearly triple the number of accidents that were registered by the police. Beside fractures of the upper extremities with major surgery, traumatic brain injuries were the leading cause for hospital admission. Bicycle helmet use can reduce traumatic brain injuries and the related number of deaths and hospital admissions. Laws on bicycle helmet might decrease the use of bicycles and therefore the reduction of positive health benefits. Other methods of accident prevention may lead to positive effects as helmet legislation as well, while having no reduction in bicycle use.
The purpose of this study was to analyse the actual injury situation of bicyclists regarding accidents involving more than one bicyclist. Bicyclists were included in a medical and technical analysis to create a basis for preventive measures and discovered repeating accident patterns and circumstances such as daytime, environment, helmet use rate. Technical and medical data were collected at the scene, shortly after accident. The population was compared focusing on bicycle versus bicycle accidents. Technical analysis included speed at crash, type of collision, impact angle, environment, used lane and relative velocity. Medical analysis included injury pattern and severity (AIS, ISS). Included were 578 injured bicyclists in 289 accidents from years 1999 to 2008, 61 percent were male (n=350) and 39 percent female (n=228). Sixty-seven percent ranged between 18 to 64 years of age, twelve percent each between 13 to 17 years of age and older than 65 years, eight percent between 6 to 12 years and one percent between 2 to 5 years.. Crashes took place in urban areas in 92 percent, in rural areas in 8 percent. Weather conditions were dry lanes in 97 percent and wet conditions in 3 percent. Eighty-three percent of all accidents happened during daytime, ten percent during night, and seven percent during dawn. The helmet use rate was only 7,5 percent in all involved bicyclists. The mean Maximum Abbreviated injury scale, Injury severity score was 1,31. Bicyclists are still minimally- or unprotected road users. The helmet use rate is unsatisfactorily low. The incidence of bicycle to bicycle crashes is high. Most of these accidents take place in urban areas. The level and pattern of injuries is moderate. Most of the more severe injuries occur to the head and could have been avoided by frequent helmet use.
Safety of light goods vehicles - findings from the German joint project of BASt, DEKRA, UDV and VDA
(2011)
Light goods vehicles (LGVs) are an important part of the vehicle fleet, providing a vital component in the European transportation system. On the other hand, LGVs are in the focus of public discussion regarding road safety. In order to analyse the accident situation of LGVs in an objective manner, Federal Highway Research Institute (BASt), VDA, DEKRA and German Insurers Accident Research (UDV) launched a joint project. The aim of this project, which will be finished by mid of 2011, is to identify reasonable measures which will further improve the safety of LGVs. For the first time, these partners jointly together conducted a research project and put together their know-how in accident research. Analyses are based on real-life accident data from the GIDAS database, the Accident Database of UDV (UDB), the DEKRA database and national statistics. The findings deliver answers to questions within the arena of future legislative actions and consumer protection activities. The analyses of databases cover areas of primary and secondary safety of LGVs with a special focus on advanced driver assistance systems (ADAS), driver behaviour as well as partner and occupant protection. Key figures from national statistics are used to highlight hotspots of accidents of LGVs in Germany. Finally, the proposed countermeasures are assessed regarding their potential effectiveness. Amongst others, the results show that the accident situation of LGVs is very similar to that of passenger cars. Noteworthy variations could be found in collisions with pedestrians, at reversing and regarding accident causes. Occupant safety of LGVs is on a higher level compared to cars. Results indicate that seatbelt use is on a significantly lower level compared to cars. This leads to higher-than-average injury risk for unbelted LGV occupants. When it comes to partner protection, there are problems with compatibility at LGVs. For car occupants there is a very high injury risk when colliding with a LGV. It indicates that higher passive safety test standards for LGVs would be counterproductive if they further increase stiffness of LGVs. The analysis of LGV-pedestrian accidents shows that pedestrian kinematic differs significantly from car-pedestrian accidents. At this point, existing pedestrian related test standards developed for cars cannot be adopted to LGVs. When it comes to active safety, ESC proved its effectiveness once again. Beyond that, rear view cameras, advanced emergency braking systems and lane departure warning systems show a safety potential, too. In addition to any technical countermeasures previously discussed, the importance of the driver behavior and attitude regarding the accident risk was investigated. In order to develop successful actions it is important to understand the main target population. In the case of LGV especially the crafts business and smaller companies are the major contributors the safety issue.
The European CASPER (Child Advanced Safety Project for European Roads) project studying car child safety includes a sociological approach in order to have a better understanding of the behaviour of parents driving children under 12 years old. A questionnaire was distributed via the internet in Europe with 998 parents (representing 1638 children) from 22 European countries responding. The results inform on the way parents secure their children during a car trip. Many parents did not control how their children were installed in the child restraint system (CRS). A toddler was more likely to travel into a child seat than an older child was. Regarding misuse situations, an important part of the participants did not think that they could make mistakes when fixing the child seat to the car (26%) or when placing the child into the seat (39%). This leaves an important field of action especially by communication via different media and in the CRS sale outlets.
The misuse of CRS (child restraint system) is one of the most urgent problems in connection of child safety in cars. Numerous field studies show that more than two thirds of all CRS are used in a wrong way. This misuse could lead to serious injuries for the children. Surprisingly the quality of CRS use is coded much better in accident data (e.g. GIDAS) than the results of observatory field studies show. It is expected that misuse of CRS was not detected by the accident teams in a large number of the cases. An essential part in improving child seats and their usability is the knowledge of the relation between misuse and resulting injuries. For that the analysis and experimental reconstruction of accidents is an important part. For allowing an exact experimental accident reconstruction, it is necessary to have detailed information about the securing situation of the child and about the installation of the CRS in the car.
Im Rahmen dieses Projektes wurden vor dem Hintergrund der nationalen und europäischen Entwicklungen (z.B. Europäische Normung etc.) neben den Randbedingungen für die Kraftduktilitätsprüfung auch die Auswertung der dabei erfassten Daten genauer betrachtet sowie praxisrelevante Parameter bzgl. der Versuchsdurchführung und -auswertung ermittelt. Ebenso wurde auch versucht den gesamten Verlauf der Kraftduktilitätskurve sowie ggf. auch die Gestalt der Kurve in die Auswertung mit einzubeziehen und nicht nur, wie bisher, punktuelle Werte bzw. einzelne feste Bereiche. Anhand der in diesem Projekt ermittelten Ergebnisse kann festgehalten werden, dass die Probekörperform mit geradem Steg (Form II) gemäß DIN EN 13589 der Probekörperform mit verjüngtem Steg (Form I) gemäß DIN EN 13398 vorzuziehen ist, da es trotz der höchsten Maximalkräfte bei der Form I bei niedrigen Temperaturen häufig zu einem vorzeitigen Probenriss kam und die die Ausziehlänge wesentlich geringer als bei der Form II (Form mit geradem Steg) war. So das in vielen Fällen eine Ermittlung der Formänderungsarbeit zwischen 200 mm und 400 mm Dehnungsweg gemäß der DIN EN 13703 bei Prüfung mit der Form I nicht möglich war, da die Proben die Ausziehlänge von 400 mm nicht erreichten. Dadurch kann die Form mit verjüngtem Steg (Form I), trotz der Verwendung für die elastische Rückstellung nach DIN EN 13398, nicht für den Einsatz bei der Kraftduktilitätsprüfung empfohlen werden. Hinsichtlich der Ziehgeschwindigkeit sollte die bis-her in der Norm verankerte Ziehgeschwindigkeit von 50 mm/min beibehalten werden, da eine Reduzierung der Geschwindigkeit keine Vorteile, z.B. hinsichtlich der Vermeidung eines vorzeitigen Proberisses bei niedrigen Temperaturen, bringt und die Prüfung mit der reduzierten Ziehgeschwindigkeit von 25 mm/min somit doppelt so lange dauern würde. Bezüglich der Prüftemperatur sollte ein Vorgehen gewählt werden, dass es erlaubt, die Ergebnisse, die bei den verschiedenen Bitumensorten gewonnen werden, zu vergleichen. Dies könnte beispielsweise 10-°C als Prüftemperatur sein. Die Festlegung einer einheitlichen Prüftemperatur und dann entsprechend sortenspezifische Anforderungen an die Formänderungsarbeit würden auch bei unbekannten Bitumen und/oder Kontrollprüfungen die Durchführung der Kraftduktilitätsprüfung sowie die Bestimmung der Bitumensorte erleichtern. Aufgrund der im Rahmen des Projektes ermittelten Ergebnisse sollte für Kraftduktilitätsprüfungen die Probekörperform mit geradem Steg gemäß DIN EN 13589 und eine Ziehgeschwindigkeit von 50 mm/min gewählt werden. Die anderen Randbedingungen (Probekörperform mit verjüngtem Steg und Ziehgeschwindigkeit von 25 mm/min) haben sich hinsichtlich der Durchführbarkeit, Auswertbarkeit und Praktikabilität als nicht geeignet erwiesen. Das Rückgewinnungsverfahren für polymermodifizierte Bitumenemulsionen gemäß dem Entwurf der DIN EN 13074-1 hat sich bei den Untersuchungen im Labor als geeignet hinsichtlich Anwendbarkeit und der Ergebnisse gezeigt. So dass keine Modifikation des Verfahrens notwendig erscheint. Für die genauere Interpretation der Kraftduktilitätskurven sowie ggf. Unterscheidung der einzelnen Sorten ist eine Aufteilung der Kurve in zwei Teilbereiche unumgänglich. Allerdings konnte bisher noch kein Verfahren identifiziert werden, mit dem dies eineindeutig möglich ist. Vor allem weil die in der Praxis auftretende Spannbreite der Ergebnisse bei einer einzelnen Sorte bereits recht groß ist, daher nicht immer auszuschließen ist, dass sich die Randbereiche der einzelnen Sorten nicht überschneiden. Um die einzelnen Sorten anhand der Prüfergebnisse unterscheiden bzw. differenzieren zu können, sind die Prüfungen bei einheitlichen Temperaturen unabhängig von der Bitumensorte notwendig, da sich mit der Änderung der Temperatur auch der Kurvenverlauf und somit die Kennwerte ändern. Das Verfahren zur Aufteilung der Kurven in Teilbereiche sollte frei von subjektiven Einflüssen rein mathematisch erfolgen, nachvollziehbar und einfach im täglichen Laborbetrieb anwendbar sein. Daher wird als relativ einfache Variante die Ermittlung der Steigung des Kurvenverlaufes anhand der 1. Ableitung vorgeschlagen. Unabhängig von der Art des Kurvenverlaufes lässt sich hierbei immer das Maximum der Steigung ermitteln. Anhand dessen kann die Trennung in die beiden Bereiche der Kraftduktilitätskurve einfach und schnell durchgeführt werden. Die weitere Interpretation des Kurvenverlaufes sowie die Zuordnung zu einer Bitumensorte kann anhand des Quotienten der Formänderungsarbeiten der beiden Abschnitte erfolgen.
Die Radfahrausbildung (RA) im vierten Schuljahr ist der wichtigste Baustein der Verkehrssicherheitsarbeit in der Schule. Ihr Stellenwert entspricht der Bedeutung, die das Fahrrad für Kinder und Jugendliche zunächst als Spielgerät, dann zunehmend als Verkehrsmittel hat. Die Verkehrsteilnahme von Kindern hat sich in den letzten Jahren jedoch stark verändert, die eigenständige Mobilität hat abgenommen. Das Fahrrad stellt zwar weiterhin ein für Kinder aller Altersgruppen wichtiges Verkehrsmittel dar, Kinder haben jedoch insbesondere in den Städten immer weniger Gelegenheit, es eigenständig zu nutzen. Auch deshalb nehmen Kinder heute mit anderen motorischen Voraussetzungen an der schulischen RA teil als früher. Im vorliegenden Forschungsprojekt war zu untersuchen, mit welchen Inhalten und Vorgehensweisen die heutige Radfahrerziehung in der Grundschule arbeitet. Andererseits war auch zu klären, wie sich individuelle Leistungsunterschiede und -schwächen von Kindern beim Beherrschen des Fahrrads empirisch erfassen lassen und von welchen individuellen, sozialen oder physischen Randmerkmalen sie vorrangig beeinflusst werden; der derzeitige Forschungsstand hierzu wurde diskutiert und bildete die Grundlage für die Planung der breit ausgelegten empirischen Erhebungen. Auf der Grundlage der Erkenntnisse sollten Vorschläge für eine künftige Radfahrausbildung in der Schule erarbeitet werden. Dazu wurden während laufender Kurse zur Radfahrausbildung Polizisten, Lehrerinnen, Eltern und Kinder (insgesamt etwa 3.000) schriftlich befragt, zusätzlich erfolgte eine bundesweit repräsentative Online-Befragung von 1.000 Eltern 8-10-jähriger Kinder. In einer weiteren Befragung von Polizeiverkehrslehrern wurde nach innovativen Modellen der motorischen Förderung gesucht, von denen 17 Polizeidienststellen, die zuständigen Klassenlehrerinnen, Eltern sowie Kindern als zweite Welle der Hauptbefragung näher untersucht wurden. Zur qualitativen Analyse der Abläufe bei der Radfahrausbildung und zur Entwicklung von Vorschlägen wurden vier Fachkonferenzen und ergänzende Interviews bundesweit durchgeführt. Die Auswertung der Befragungen zeigte, dass die Radfahrausbildung nach wie vor flächendeckend im ganzen Land durchgeführt wird, in der Regel in der Arbeitsteilung von Schule und Polizei. Allerdings gibt es auf Seiten der Polizei in den letzten Jahren Veränderungen. Die Inklusion wird zunehmend wichtiger, stößt aber bei der praktischen Radfahr-Ausbildung vor allem im Verkehrsraum an ihre Grenzen. Die von allen Beteiligten intensiv diskutierten motorischen Schwächen der Kinder beim Radfahren lassen sich anhand der erhobenen Kenngrößen (Einschätzungen von Eltern, Selbsteinschätzungen der Kinder, Ergebnisse von experimentellen Kurztests, Schulnoten) ausreichend präzise erfassen, wobei eine Fülle verschiedener Faktoren als Ursachen anzusehen sind. Allerdings ist das Thema für die Polizei wichtiger als für Lehrkräfte, die motorische Schwächen der Kinder vergleichsweise seltener erkennen. Eine vielfältige motorische Förderung gehört heute zur Praxis der Schulen, ist aber oft nicht umfassend und kontinuierlich genug. In einem Umfeld, das Bewegungserfahrungen der Kinder einschränkt, wird vermehrt eine besonders intensive Förderung angeboten, wie die Untersuchung belegt. Fast alle Kinder haben ein Kinderrad (im Mittel seit dem Alter von 3,6 Jahren), 50 % der Kinder haben vorher mit einem Laufrad gespielt. Die Laufradnutzung wirkt sich positiv auf die motorischen Fertigkeiten aus. Etwa 1/6 der Kinder hat im Umfeld der Wohnung keine Möglichkeit zum Radfahren. Der Großteil der Eltern hat mit dem Kind das Radfahren geübt, am intensivsten zwischen dem 5. und 8. Lebensjahr. Ein Drittel der Eltern hatte die Kinder dabei jedoch nicht oder nur wenig unterstützt. Die Autoren empfehlen, wegen des großen Stellenwertes der Polizei-Mitwirkung diese unbedingt zu erhalten. In Bundesländern, wo Kürzungen nicht verhindert werden können, sollte vorab versucht werden, durch Absprachen zwischen allen Beteiligten (Schule, Polizei, Elternvertreter, außerschulische Unterstützer) Erfolg und Qualität der Ausbildung langfristig zu sichern. Unabhängig davon sollte auch überlegt werden, wie Eltern in stärkerem Maße selber unterstützen können und in stärkerem Maße beteiligt werden können. Ein gewisses grundlegendes Maß an Polizeiunterstützung ist aber aus Sicht der Autoren unverzichtbar, damit das System funktionsfähig bleibt. Optimierungspotenziale werden auch bei einer intensiveren Abstimmung und Kommunikation zwischen allen Beteiligten (Kindergärten, Schulen, Polizei, Eltern), bei einer umfassenderen motorischen Förderung sowie bei der Lehrerausbildung gesehen. Eltern sollten frühzeitig schon im Kindergarten informiert werden (z. B. über den Nutzen von Laufrädern) und klare Hinweise sowie Übungsangebote erhalten, z.B. in Form von Hausaufgaben mit Bewegungsanteil oder zu Radfahrübungen.
Detailed anthropometric data of pregnant women have been collected and used in the development of a computational model of the pregnant occupant model "Expecting". The model is complete with a finite element uterus and multi-body fetus, which is a novel feature in the models of this kind. The computational pregnant occupant model has been validated and used to simulate a range of impacts. The strains developed in the utero-placental interface are used as the main criteria for fetus safety. Stress distributions due to inertial loading of the fetus on the utero-placental interface play a role on the strain levels. Inclusion of fetus model is shown to significantly affect the strain levels in the utero-placental interface. This series of studies has led to the design of seatbelt features specifically for the pregnant women to enable them use the seatbelt correctly and comfortably.
Within the COST Action TU1101 the working group WG 1 is dealing with acceptance criteria and problems in helmet use while bicycling concerning conspicuity, thermal stress, ventilation deficits and other potential confounding. To analyze the helmet usage practice of bicyclists in Europe a questionnaire was developed in the scope of working group 1 to collect relevant information by means of a field study. The questionnaire consists of some 66 questions covering the fields of personal data of the cyclist, riding und helmet usage habits, information concerning the helmet model and the sensation of the helmet, as well as information on previous bicycle accidents. A second complementary study is conducted to analyze if the use of a bicycle helmet influences the seating geometry and the posture of cyclists when riding a bicycle and if the if the helmet vertically limits the vision. For this purpose cyclists with and without helmets were photographed in real world situations and relevant geometrical values such as the decline of the torso, the head posture of the upper vertical vision limit due to the helmet were established from the photos. The interim results of the field studies which were conducted in Germany by the Hannover Medical School are presented in this study. Some 227 questionnaires were filled out, of which 67 participants had used a helmet and 42 of the 227 participants have had a bicycle accident before. For the analysis of the riding position and posture of the cyclist over 40 pictures of riders with a helmet and over 240 pictures of riders without a helmet were measured concerning the seating geometry to describe the influence of using a bicycle helmet. Some results in summary: From the riders interviewed with the questionnaire only 11% of the city bike riders and 12% of the mountain bike riders always used the helmet, while 38% of the racing bike riders and 88% of the e-bike-riders always used the helmet. The helmet use seems not to change the sensation of safety of cycling compared to the use of a car. The arguments for not wearing a helmet are mostly stated to be the short distance of a trip, high temperatures or carelessness and waste of time. The reasons for using a helmet are stated to be the feeling of safety and being used to using a helmet. Being a role model for others was also stated to be a reason for helmet use. Concerning the sensation of the helmet 9% of the riders reported problems with the field of vision when using a helmet, 57% saw the problem of sweating too much, and 10% reported headaches or other unpleasant symptoms like pressure on the forehead when using the helmet. The analysis of the seating posture from the pictures taken of cyclists revealed that older cyclists generally have a riding position where the handle bar is higher than the seat (0-° to 10-° incline from seat to handlebar), while younger riders had a higher variance (between -10-° decline and 20-° incline). Further, elderly riders and riders with helmets seem to have a more upright position of the upper body when cycling. The vertical vision limit due to the helmet is determined by the front rim of the helmet (mostly the sun shade). Typical values here range from 0-° (horizontal line from the eye to the sun shade) to 75-° upwards, in which elderly riders tend to have a slightly higher vertical vision limit possibly due to the helmet being worn more towards the face.
The current paper reports on the results of a pilot study aiming to investigate the effect of mobile telephone use on the driving performance of 5 amateur and 5 professional drivers. Their driving acuity was tested through a driving simulator. Analysis and interpretation of the results occurred comparing the drivers' driving performance while talking, reading messages and writing a message on the mobile phone (intervention time) with the drivers' driving performance engaged in no activity (control time). The variables affected by the mobile phone were the "steering", the "lane offset" and the "duration of lane offset". Moreover, the drivers involved in a car crash in the last five years appeared to differ from those who were not involved in a crash in both "lane offset" and "following distance". The results of this pilot study will inform the design of a large experimental study on 50 professional and 50 amateur drivers.