Sonstige
Detailed anthropometric data of pregnant women have been collected and used in the development of a computational model of the pregnant occupant model "Expecting". The model is complete with a finite element uterus and multi-body fetus, which is a novel feature in the models of this kind. The computational pregnant occupant model has been validated and used to simulate a range of impacts. The strains developed in the utero-placental interface are used as the main criteria for fetus safety. Stress distributions due to inertial loading of the fetus on the utero-placental interface play a role on the strain levels. Inclusion of fetus model is shown to significantly affect the strain levels in the utero-placental interface. This series of studies has led to the design of seatbelt features specifically for the pregnant women to enable them use the seatbelt correctly and comfortably.
Das Ziel des Forschungsprojekts "Quantifizierung der Passiven Sicherheit für Pkw-Insassen" besteht darin, Messergebnisse in Form von Dummybelastungswerten zu einem Sicherheitsindex zu verdichten. Zur Formulierung des dazu erforderlichen Bewertungsalgorithmus wurden folgende Zusammenhänge erarbeitet: 1. Beziehung zwischen Verletzungsschwere und Dummybelastungsgröße für relevante Körperteile, 2. Relevanzfaktoren zur Wichtung der Teilergebnisse und 3. Zusammenhang zwischen körperteilspezifischen Schutzkriterien und dem entsprechenden Erfüllungsgrad. Die wesentliche Aufmerksamkeit erforderte die Bereitstellung der Relevanzstruktur, da mit den einzelnen Relevanzfaktoren die gemessenen Belastungen entsprechend der Bedeutung der im realen Unfallgeschehen beobachteten Verletzungen bewertet werden sollten. Im Bereich der experimentellen Simulation lag das Hauptaugenmerk auf der Bereitstellung der Versuchsbedingungen, wobei die gesetzlich vorgeschriebenen Sicherheitsversuche zu berücksichtigen waren. Daraus ergab sich die Festlegung auf folgende Versuchskonstellationen: 1. Frontaler Wandaufprall, 2. Seitenaufprall einer fahrbaren Barriere auf den stehenden Pkw und 3. Kompatibilitätsversuch, bei dem ein Fahrzeug seitlich mit einem anderen Fahrzeug gleichen Typs kollidiert. Mit Hilfe eines erarbeiteten Bewertungsalgorithmus werden die versuchstechnisch gemessenen Belastungswerte normiert und der Bewertungsfunktion zugeführt. Die so ermittelten Erfüllungsgrade erhalten durch die Relevanzfaktoren eine unfallspezifische Wichtung und lassen sich über Teilsicherheitsindizes zu einem Gesamt-Sicherheitsindex zusammenfassen. Dieser Sicherheitsindex soll Aufschluss über das Niveau der inneren Sicherheit von Pkw geben.
Im Rahmen eines Forschungsprojektes sollten die Auswirkungen realisierter Umgestaltungen innerstädtischer Straßen auf den Betrieb von Linienbussen auf empirischer Basis untersucht werden. Dabei standen Verkehrsberuhigungsmaßnahmen im Vordergrund. Die Untersuchungen wurden an 14 Fallbeispielen durchgeführt. Im einzelnen handelte es sich dabei um Verfolgungsfahrten von Linienbussen zur Ermittlung von Geschwindigkeit und Fahrzeit auf festgelegten Routen mittels eines Fahrcomputers, Videoaufnahmen zur Erfassung von Fahrverhalten und möglichen Konflikten, der Erfassung der Ein- und Aussteiger an den Haltestellen, Fahrgastbefragungen in ausgewählten Städten sowie Verkehrszählungen bei Fallbeispielen, für die keine neueren Daten vorlagen. Daraus wurden Ergebnisse für den öffentlichen Personennahverkehr ÖPNV in Fußgängerzonen, in verkehrsberuhigten Bereichen, in Sammelstraßen sowie in Hauptverkehrsstraßen ermittelt.
In-depth road traffic accident research in Spain is a fairly recent activity. In the past, only accident data that had been retrospectively processed by the national and regional traffic police forces was available. In 1999 Applus+IDIADA set up a permanent accident research unit to carry out indepth analysis of road accidents in Spain. Since then accidents involving cars, motorcycles, coaches and vulnerable road users have been thoroughly studied. The Applus+IDIADA accident research team has carried out work for the various traffic polices in Spain and it is currently involved in several research projects in which accidentology is one of the main tasks. The working methodology of the team is presented in the first part of the paper. In the framework of the European research project "Rollover" (GRD2-2001-50086), Applus+IDIADA has collected data, inspected scenarios and performed virtual reconstructions of twenty-six of the total seventy-six rollover accidents studied. The second half of the paper describes how these accident investigations were used to develop a test procedure for identifying possible improvements to the vehicle structure which augment occupant protection in a rollover scenario. In particular, a proposal for a new drop test for rollover assessment is presented. The cases were analysed for severity, in terms of injury to the occupants and damage to the vehicle, and taking into account whether a seatbelt was worn or not. The worst possible cases were identified as those that had severe occupant injuries and sizable damage to the occupant compartment when seatbelts had been worn. The most severe cases were then analysed further for impact position (roll and pitch angles) and the impact velocity. With these parameters taken into account, the most representative combinations could be found. This resulted in a series of configurations for possible drop tests. The results of the tests indicate where passenger vehicle structures need to be improved in order to increase occupant safety in the event of a rollover crash.
Die rasche Verbreitung von Tempo 30-Gebieten seit 1985 hat in den Verkehrsbetrieben zu Widerständen geführt. Man befürchtet, dass Fahrzeitverluste und Komforteinbußen entstehen sowie für den Betreiber die Wirtschaftlichkeit verschlechtert wird. Das Vorhaben analysiert die Verbreitung der Tempo 30-Gebiete mit Buslinien sowie die Einschätzung der Verkehrsbetriebe und ermittelt mit einer detaillierten Untersuchung ausgewählter Buslinien die eigentlichen Auswirkungen. Wesentliche Untersuchungsergebnisse sind: 1. Die Verkehrsbetriebe beurteilen die Tempo 30-Gebiete überwiegend negativ, 2. Fahrzeitmessungen ergeben, dass je nach Maßnahmenintensität in den Tempo 30-Gebieten mit bis zu 30 Sekunden Fahrzeitverlusten auf 1.000 Meter zu rechnen ist. Im Vergleich zu weiteren Verlustzeiten haben die heutigen Tempo 30-Gebiete keinen wesentlichen Einfluss, 3. Befragungen der Fahrgäste und Fahrer zeigen, dass die Fahrgäste die Tempo 30-Gebiete im Linienverlauf erkennen und insbesondere die Erhöhung der allgemeinen Sicherheit als Vorteil nennen. Die Auswirkungen auf den Busverlauf werden von den Fargästen als ziemlich gering eingestuft. Die Fahrerbefragung ergab dagegen sehr widersprüchliche Antworten. Bei weiter zunehmender Einrichtung von Tempo 30-Gebieten und weiter zunehmender Maßnahmenintensität werden sich die Auswirkungen sicherlich nennenswert verstärken. Wichtig ist daher, die rechtzeitige Beteiligung der Verkehrsbetriebe sicherzustellen und ÖPNV-verträgliche Maßnahmen in diesen Gebieten vorzunehmen.
One main objective of the EU-Project SENIORS is to provide improved methods to assess thoracic injury risk to elderly occupants. In contribution to this task paired simulations with a THOR dummy model and human body model will be used to develop improved thoracic injury risk functions. The simulation results can provide data for injury criteria development in chest loading conditions that are underrepresented in PMHS test data sets that currently proposed risk functions are based on. To support this approach a new simplified generic but representative sled test fixture and CAE model for testing and simulation were developed. The parameter definition and evaluation of this sled test fixture and model is presented in this paper. The justification and definition of requirements for this test set-up was based on experience from earlier studies. Simple test fixtures like the gold standard sled fixture are easy to build and also to model in CAE, but provide too severe belt-only loading. On the other hand a vehicle buck including production components like airbag and seat is more representative, but difficult to model and to be replicated at a different laboratory. Furthermore some components might not be available for physical tests at later stage. The basis of the SENIORS generic sled test set-up is the gold standard fixture with a cable seat back and foot rest. No knee restraint was used. The seat pan design was modified including a seat ramp. The three-point belt system had a generic adjustable load limiter. A pre-inflated driver airbag assembly was developed for the test fixture. Results of THOR test and simulations in different configurations will be presented. The configurations include different deceleration pulses. Further parameter variations are related to the restraint system including belt geometry and load limiter levels. Additionally different settings of the generic airbag were evaluated. The test set-up was evaluated and optimized in tests with the THOR-M dummy in different test configurations. Belt restraint parameters like D-ring position and load limiter setting were modified to provide moderate chest loading to the occupant. This resulted in dummy readings more representative of the loading in a contemporary vehicle than most available PMHS sled tests reported in the literature. However, to achieve a loading configuration that exposes the occupant to even less severe loading comparable to modern vehicle restraints it might be necessary to further modify the test set-up. The new generic sled test set-up and a corresponding CAE model were developed and applied in tests and simulations with THOR. Within the SENIORS project with this test set-up also volunteer and PMHS as well as HBM simulations are performed, which will be reported in other publications. The test environment can contribute in future studies to the assessment of existing and new frontal impact dummies as well as dummy improvements and related instrumentation. The test set-up and model could also serve as a new standard test environment for PMHS and volunteer tests as well as HBM simulations.
Past European collaborative research involving government bodies, vehicle manufacturers and test laboratories has resulted in a prototype barrier face called the Advanced European Mobile Deformable Barrier (AE-MDB) for use in a new side impact test procedure . This procedure offers a better representation of the current accident situation and, in particular, the barrier concept is a better reflection of front-end stiffness seen in today- passenger car fleet compared to that of the current legislative barrier face. Based on the preliminary performance corridors of the prototype AE-MDB, a refined AE-MDB specification has been developed. A programme of barrier to load cell wall testing was undertaken to complete and standardise the AE-MDB specification. Barrier faces were supplied by the four leading manufacturers to demonstrate that the specification could be met by all. This paper includes background, specification and proof of compliance.
The incidence of side impacts was investigated from GIDAS data. Both vehicle-fixed object and vehicle-vehicle collisions were analysed as these are enclosed within the consumer testing program. Vehicle-fixed object collisions were stratified according to ESC availability. Results indicated that vehicles equipped with ESC rarely have pure-lateral impacts. An increase in oblique collisions was seen for the vehicles with ESC whereby most vehicle were driving in left curves. The analysis of vehicle-vehicle collisions developed injury risk curves were developed at the AIS3+ injury severity for the vehicle-vehicle side impacts. Results suggested that greatest injury risk occurred when a Pre Euro NCAP vehicle was struck by a Post Euro-NCAP vehicle. The remaining curves did not show different behaviour, indicating that stiffness increased have been equally combated. This was attributable to the few Post Euro-NCAP vehicles that had a deployed curtain airbag available in the sample. The integration of Euro NCAP testing has shown to improve vehicle crashworthiness for pole collisions, as those vehicles with ESC rarely incur lateral impacts.
Gegenstand der Studie ist die Sicherheitsbeurteilung kleiner Stadt-Pkw. Durch die Auswertung von Herstellerunterlagen zur konstruktiven Gestaltung, von Veröffentlichungen zum Kollisionsverhalten und zur Betriebssicherheit, in Kontakten mit einem Importeur solcher Fahrzeuge und durch eigene Begutachtung mehrerer Modelle wurde der technische Stand gegenwärtig angebotener Fahrzeuge erfasst. Die rechtliche Situation der Fahrzeuge in der Bundesrepublik Deutschland, Frankreich, Italien und Japan wurde zusammengestellt. Die gesetzlichen Anforderungen dieser Staaten an diesen Fahrzeugen unterscheiden sich deutlich. Europäische Fahrzeuge berücksichtigen nur in geringem Maß Belange der passiven Sicherheit, da die Fahrzeuge in ihren Herstellungsländern Vorschriften zum Aufprallverhalten und zum Insassenschutz nicht erfüllen müssen. Japanische Fahrzeuge sind in ihren Eigenschaften herkömmlichen Fahrzeugen ähnlich. Wichtige Anforderungen an die innere und äussere passive Sicherheit dieser Stadt-Pkw werden zusammengestellt.
The European CASPER (Child Advanced Safety Project for European Roads) project studying car child safety includes a sociological approach in order to have a better understanding of the behaviour of parents driving children under 12 years old. A questionnaire was distributed via the internet in Europe with 998 parents (representing 1638 children) from 22 European countries responding. The results inform on the way parents secure their children during a car trip. Many parents did not control how their children were installed in the child restraint system (CRS). A toddler was more likely to travel into a child seat than an older child was. Regarding misuse situations, an important part of the participants did not think that they could make mistakes when fixing the child seat to the car (26%) or when placing the child into the seat (39%). This leaves an important field of action especially by communication via different media and in the CRS sale outlets.